/**
******************************************************************************
* @file stm32f4xx_hal_dma_ex.c
* @author MCD Application Team
* @version V1.0.0
* @date 18-February-2014
* @brief DMA Extension HAL module driver
* This file provides firmware functions to manage the following
* functionalities of the DMA Extension peripheral:
* + Extended features functions
*
@verbatim
==============================================================================
##### How to use this driver #####
==============================================================================
[..]
The DMA Extension HAL driver can be used as follows:
(#) Start a multi buffer transfer using the HAL_DMA_MultiBufferStart() function
for polling mode or HAL_DMA_MultiBufferStart_IT() for interrupt mode.
-@- In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed.
-@- When Multi (Double) Buffer mode is enabled the, transfer is circular by default.
-@- In Multi (Double) buffer mode, it is possible to update the base address for
the AHB memory port on-the-fly (DMA_SxM0AR or DMA_SxM1AR) when the stream is enabled.
@endverbatim
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @defgroup DMAEx
* @brief DMA Extended HAL module driver
* @{
*/
#ifdef HAL_DMA_MODULE_ENABLED
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
/* Private functions ---------------------------------------------------------*/
/** @defgroup DMAEx_Private_Functions
* @{
*/
/** @defgroup DMAEx_Group1 Extended features functions
* @brief Extended features functions
*
@verbatim
===============================================================================
##### Extended features functions #####
===============================================================================
[..] This section provides functions allowing to:
(+) Configure the source, destination address and data length and
Start MultiBuffer DMA transfer
(+) Configure the source, destination address and data length and
Start MultiBuffer DMA transfer with interrupt
(+) Change on the fly the memory0 or memory1 address.
@endverbatim
* @{
*/
/**
* @brief Starts the multi_buffer DMA Transfer.
* @param hdma : pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @param SrcAddress: The source memory Buffer address
* @param DstAddress: The destination memory Buffer address
* @param SecondMemAddress: The second memory Buffer address in case of multi buffer Transfer
* @param DataLength: The length of data to be transferred from source to destination
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
{
/* Process Locked */
__HAL_LOCK(hdma);
/* Current memory buffer used is Memory 0 */
if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
{
hdma->State = HAL_DMA_STATE_BUSY_MEM0;
}
/* Current memory buffer used is Memory 1 */
else if((hdma->Instance->CR & DMA_SxCR_CT) != 0)
{
hdma->State = HAL_DMA_STATE_BUSY_MEM1;
}
/* Check the parameters */
assert_param(IS_DMA_BUFFER_SIZE(DataLength));
/* Disable the peripheral */
__HAL_DMA_DISABLE(hdma);
/* Enable the double buffer mode */
hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
/* Configure DMA Stream destination address */
hdma->Instance->M1AR = SecondMemAddress;
/* Configure the source, destination address and the data length */
DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
/* Enable the peripheral */
__HAL_DMA_ENABLE(hdma);
return HAL_OK;
}
/**
* @brief Starts the multi_buffer DMA Transfer with interrupt enabled.
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @param SrcAddress: The source memory Buffer address
* @param DstAddress: The destination memory Buffer address
* @param SecondMemAddress: The second memory Buffer address in case of multi buffer Transfer
* @param DataLength: The length of data to be transferred from source to destination
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
{
/* Process Locked */
__HAL_LOCK(hdma);
/* Current memory buffer used is Memory 0 */
if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
{
hdma->State = HAL_DMA_STATE_BUSY_MEM0;
}
/* Current memory buffer used is Memory 1 */
else if((hdma->Instance->CR & DMA_SxCR_CT) != 0)
{
hdma->State = HAL_DMA_STATE_BUSY_MEM1;
}
/* Check the parameters */
assert_param(IS_DMA_BUFFER_SIZE(DataLength));
/* Disable the peripheral */
__HAL_DMA_DISABLE(hdma);
/* Enable the Double buffer mode */
hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
/* Configure DMA Stream destination address */
hdma->Instance->M1AR = SecondMemAddress;
/* Configure the source, destination address and the data length */
DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
/* Enable the transfer complete interrupt */
__HAL_DMA_ENABLE_IT(hdma, DMA_IT_TC);
/* Enable the Half transfer interrupt */
__HAL_DMA_ENABLE_IT(hdma, DMA_IT_HT);
/* Enable the transfer Error interrupt */
__HAL_DMA_ENABLE_IT(hdma, DMA_IT_TE);
/* Enable the fifo Error interrupt */
__HAL_DMA_ENABLE_IT(hdma, DMA_IT_FE);
/* Enable the direct mode Error interrupt */
__HAL_DMA_ENABLE_IT(hdma, DMA_IT_DME);
/* Enable the peripheral */
__HAL_DMA_ENABLE(hdma);
return HAL_OK;
}
/**
* @brief Change the memory0 or memory1 address on the fly.
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @param Address: The new address
* @param memory: the memory to be changed, This parameter can be one of
* the following values:
* @arg MEMORY0
* @arg MEMORY1
* @note The MEMORY0 address can be changed only when the current transfer use
* MEMORY1 and the MEMORY1 address can be changed only when the current
* transfer use MEMORY0.
* @retval HAL status
*/
HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory)
{
if(memory == MEMORY0)
{
/* change the memory0 address */
hdma->Instance->M0AR = Address;
}
else
{
/* change the memory1 address */
hdma->Instance->M1AR = Address;
}
return HAL_OK;
}
/**
* @}
*/
/**
* @brief Set the DMA Transfer parameter.
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains
* the configuration information for the specified DMA Stream.
* @param SrcAddress: The source memory Buffer address
* @param DstAddress: The destination memory Buffer address
* @param DataLength: The length of data to be transferred from source to destination
* @retval HAL status
*/
static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
{
/* Configure DMA Stream data length */
hdma->Instance->NDTR = DataLength;
/* Peripheral to Memory */
if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
{
/* Configure DMA Stream destination address */
hdma->Instance->PAR = DstAddress;
/* Configure DMA Stream source address */
hdma->Instance->M0AR = SrcAddress;
}
/* Memory to Peripheral */
else
{
/* Configure DMA Stream source address */
hdma->Instance->PAR = SrcAddress;
/* Configure DMA Stream destination address */
hdma->Instance->M0AR = DstAddress;
}
}
/**
* @}
*/
#endif /* HAL_DMA_MODULE_ENABLED */
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
