/**
******************************************************************************
* @file stm32f4xx_ll_fmc.h
* @author MCD Application Team
* @version V1.0.0
* @date 18-February-2014
* @brief Header file of FMC HAL module.
******************************************************************************
* @attention
*
* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Define to prevent recursive inclusion -------------------------------------*/
#ifndef __STM32F4xx_LL_FMC_H
#define __STM32F4xx_LL_FMC_H
#ifdef __cplusplus
extern "C" {
#endif
#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal_def.h"
/** @addtogroup STM32F4xx_HAL_Driver
* @{
*/
/** @addtogroup FMC
* @{
*/
/* Exported typedef ----------------------------------------------------------*/
#define FMC_NORSRAM_TypeDef FMC_Bank1_TypeDef
#define FMC_NORSRAM_EXTENDED_TypeDef FMC_Bank1E_TypeDef
#define FMC_NAND_TypeDef FMC_Bank2_3_TypeDef
#define FMC_PCCARD_TypeDef FMC_Bank4_TypeDef
#define FMC_SDRAM_TypeDef FMC_Bank5_6_TypeDef
#define FMC_NORSRAM_DEVICE FMC_Bank1
#define FMC_NORSRAM_EXTENDED_DEVICE FMC_Bank1E
#define FMC_NAND_DEVICE FMC_Bank2_3
#define FMC_PCCARD_DEVICE FMC_Bank4
#define FMC_SDRAM_DEVICE FMC_Bank5_6
/**
* @brief FMC_NORSRAM Configuration Structure definition
*/
typedef struct
{
uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used.
This parameter can be a value of @ref FMC_NORSRAM_Bank */
uint32_t DataAddressMux; /*!< Specifies whether the address and data values are
multiplexed on the data bus or not.
This parameter can be a value of @ref FMC_Data_Address_Bus_Multiplexing */
uint32_t MemoryType; /*!< Specifies the type of external memory attached to
the corresponding memory device.
This parameter can be a value of @ref FMC_Memory_Type */
uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
This parameter can be a value of @ref FMC_NORSRAM_Data_Width */
uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory,
valid only with synchronous burst Flash memories.
This parameter can be a value of @ref FMC_Burst_Access_Mode */
uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing
the Flash memory in burst mode.
This parameter can be a value of @ref FMC_Wait_Signal_Polarity */
uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash
memory, valid only when accessing Flash memories in burst mode.
This parameter can be a value of @ref FMC_Wrap_Mode */
uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one
clock cycle before the wait state or during the wait state,
valid only when accessing memories in burst mode.
This parameter can be a value of @ref FMC_Wait_Timing */
uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FMC.
This parameter can be a value of @ref FMC_Write_Operation */
uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait
signal, valid for Flash memory access in burst mode.
This parameter can be a value of @ref FMC_Wait_Signal */
uint32_t ExtendedMode; /*!< Enables or disables the extended mode.
This parameter can be a value of @ref FMC_Extended_Mode */
uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers,
valid only with asynchronous Flash memories.
This parameter can be a value of @ref FMC_AsynchronousWait */
uint32_t WriteBurst; /*!< Enables or disables the write burst operation.
This parameter can be a value of @ref FMC_Write_Burst */
uint32_t ContinuousClock; /*!< Enables or disables the FMC clock output to external memory devices.
This parameter is only enabled through the FMC_BCR1 register, and don't care
through FMC_BCR2..4 registers.
This parameter can be a value of @ref FMC_Continous_Clock */
}FMC_NORSRAM_InitTypeDef;
/**
* @brief FMC_NORSRAM Timing parameters structure definition
*/
typedef struct
{
uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure
the duration of the address setup time.
This parameter can be a value between Min_Data = 0 and Max_Data = 15.
@note This parameter is not used with synchronous NOR Flash memories. */
uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure
the duration of the address hold time.
This parameter can be a value between Min_Data = 1 and Max_Data = 15.
@note This parameter is not used with synchronous NOR Flash memories. */
uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure
the duration of the data setup time.
This parameter can be a value between Min_Data = 1 and Max_Data = 255.
@note This parameter is used for SRAMs, ROMs and asynchronous multiplexed
NOR Flash memories. */
uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure
the duration of the bus turnaround.
This parameter can be a value between Min_Data = 0 and Max_Data = 15.
@note This parameter is only used for multiplexed NOR Flash memories. */
uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of
HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16.
@note This parameter is not used for asynchronous NOR Flash, SRAM or ROM
accesses. */
uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue
to the memory before getting the first data.
The parameter value depends on the memory type as shown below:
- It must be set to 0 in case of a CRAM
- It is don't care in asynchronous NOR, SRAM or ROM accesses
- It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories
with synchronous burst mode enable */
uint32_t AccessMode; /*!< Specifies the asynchronous access mode.
This parameter can be a value of @ref FMC_Access_Mode */
}FMC_NORSRAM_TimingTypeDef;
/**
* @brief FMC_NAND Configuration Structure definition
*/
typedef struct
{
uint32_t NandBank; /*!< Specifies the NAND memory device that will be used.
This parameter can be a value of @ref FMC_NAND_Bank */
uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device.
This parameter can be any value of @ref FMC_Wait_feature */
uint32_t MemoryDataWidth; /*!< Specifies the external memory device width.
This parameter can be any value of @ref FMC_NAND_Data_Width */
uint32_t EccComputation; /*!< Enables or disables the ECC computation.
This parameter can be any value of @ref FMC_ECC */
uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC.
This parameter can be any value of @ref FMC_ECC_Page_Size */
uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
delay between CLE low and RE low.
This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
delay between ALE low and RE low.
This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
}FMC_NAND_InitTypeDef;
/**
* @brief FMC_NAND_PCCARD Timing parameters structure definition
*/
typedef struct
{
uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before
the command assertion for NAND-Flash read or write access
to common/Attribute or I/O memory space (depending on
the memory space timing to be configured).
This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the
command for NAND-Flash read or write access to
common/Attribute or I/O memory space (depending on the
memory space timing to be configured).
This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address
(and data for write access) after the command de-assertion
for NAND-Flash read or write access to common/Attribute
or I/O memory space (depending on the memory space timing
to be configured).
This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the
data bus is kept in HiZ after the start of a NAND-Flash
write access to common/Attribute or I/O memory space (depending
on the memory space timing to be configured).
This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
}FMC_NAND_PCC_TimingTypeDef;
/**
* @brief FMC_NAND Configuration Structure definition
*/
typedef struct
{
uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the PCCARD Memory device.
This parameter can be any value of @ref FMC_Wait_feature */
uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the
delay between CLE low and RE low.
This parameter can be a value between Min_Data = 0 and Max_Data = 255 */
uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the
delay between ALE low and RE low.
This parameter can be a number between Min_Data = 0 and Max_Data = 255 */
}FMC_PCCARD_InitTypeDef;
/**
* @brief FMC_SDRAM Configuration Structure definition
*/
typedef struct
{
uint32_t SDBank; /*!< Specifies the SDRAM memory device that will be used.
This parameter can be a value of @ref FMC_SDRAM_Bank */
uint32_t ColumnBitsNumber; /*!< Defines the number of bits of column address.
This parameter can be a value of @ref FMC_SDRAM_Column_Bits_number. */
uint32_t RowBitsNumber; /*!< Defines the number of bits of column address.
This parameter can be a value of @ref FMC_SDRAM_Row_Bits_number. */
uint32_t MemoryDataWidth; /*!< Defines the memory device width.
This parameter can be a value of @ref FMC_SDRAM_Memory_Bus_Width. */
uint32_t InternalBankNumber; /*!< Defines the number of the device's internal banks.
This parameter can be of @ref FMC_SDRAM_Internal_Banks_Number. */
uint32_t CASLatency; /*!< Defines the SDRAM CAS latency in number of memory clock cycles.
This parameter can be a value of @ref FMC_SDRAM_CAS_Latency. */
uint32_t WriteProtection; /*!< Enables the SDRAM device to be accessed in write mode.
This parameter can be a value of @ref FMC_SDRAM_Write_Protection. */
uint32_t SDClockPeriod; /*!< Define the SDRAM Clock Period for both SDRAM devices and they allow
to disable the clock before changing frequency.
This parameter can be a value of @ref FMC_SDRAM_Clock_Period. */
uint32_t ReadBurst; /*!< This bit enable the SDRAM controller to anticipate the next read
commands during the CAS latency and stores data in the Read FIFO.
This parameter can be a value of @ref FMC_SDRAM_Read_Burst. */
uint32_t ReadPipeDelay; /*!< Define the delay in system clock cycles on read data path.
This parameter can be a value of @ref FMC_SDRAM_Read_Pipe_Delay. */
}FMC_SDRAM_InitTypeDef;
/**
* @brief FMC_SDRAM Timing parameters structure definition
*/
typedef struct
{
uint32_t LoadToActiveDelay; /*!< Defines the delay between a Load Mode Register command and
an active or Refresh command in number of memory clock cycles.
This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
uint32_t ExitSelfRefreshDelay; /*!< Defines the delay from releasing the self refresh command to
issuing the Activate command in number of memory clock cycles.
This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
uint32_t SelfRefreshTime; /*!< Defines the minimum Self Refresh period in number of memory clock
cycles.
This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
uint32_t RowCycleDelay; /*!< Defines the delay between the Refresh command and the Activate command
and the delay between two consecutive Refresh commands in number of
memory clock cycles.
This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
uint32_t WriteRecoveryTime; /*!< Defines the Write recovery Time in number of memory clock cycles.
This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
uint32_t RPDelay; /*!< Defines the delay between a Precharge Command and an other command
in number of memory clock cycles.
This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
uint32_t RCDDelay; /*!< Defines the delay between the Activate Command and a Read/Write
command in number of memory clock cycles.
This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
}FMC_SDRAM_TimingTypeDef;
/**
* @brief SDRAM command parameters structure definition
*/
typedef struct
{
uint32_t CommandMode; /*!< Defines the command issued to the SDRAM device.
This parameter can be a value of @ref FMC_SDRAM_Command_Mode. */
uint32_t CommandTarget; /*!< Defines which device (1 or 2) the command will be issued to.
This parameter can be a value of @ref FMC_SDRAM_Command_Target. */
uint32_t AutoRefreshNumber; /*!< Defines the number of consecutive auto refresh command issued
in auto refresh mode.
This parameter can be a value between Min_Data = 1 and Max_Data = 16 */
uint32_t ModeRegisterDefinition; /*!< Defines the SDRAM Mode register content */
}FMC_SDRAM_CommandTypeDef;
/* Exported constants --------------------------------------------------------*/
/** @defgroup FMC_NOR_SRAM_Controller
* @{
*/
/** @defgroup FMC_NORSRAM_Bank
* @{
*/
#define FMC_NORSRAM_BANK1 ((uint32_t)0x00000000)
#define FMC_NORSRAM_BANK2 ((uint32_t)0x00000002)
#define FMC_NORSRAM_BANK3 ((uint32_t)0x00000004)
#define FMC_NORSRAM_BANK4 ((uint32_t)0x00000006)
#define IS_FMC_NORSRAM_BANK(BANK) (((BANK) == FMC_NORSRAM_BANK1) || \
((BANK) == FMC_NORSRAM_BANK2) || \
((BANK) == FMC_NORSRAM_BANK3) || \
((BANK) == FMC_NORSRAM_BANK4))
/**
* @}
*/
/** @defgroup FMC_Data_Address_Bus_Multiplexing
* @{
*/
#define FMC_DATA_ADDRESS_MUX_DISABLE ((uint32_t)0x00000000)
#define FMC_DATA_ADDRESS_MUX_ENABLE ((uint32_t)0x00000002)
#define IS_FMC_MUX(MUX) (((MUX) == FMC_DATA_ADDRESS_MUX_DISABLE) || \
((MUX) == FMC_DATA_ADDRESS_MUX_ENABLE))
/**
* @}
*/
/** @defgroup FMC_Memory_Type
* @{
*/
#define FMC_MEMORY_TYPE_SRAM ((uint32_t)0x00000000)
#define FMC_MEMORY_TYPE_PSRAM ((uint32_t)0x00000004)
#define FMC_MEMORY_TYPE_NOR ((uint32_t)0x00000008)
#define IS_FMC_MEMORY(MEMORY) (((MEMORY) == FMC_MEMORY_TYPE_SRAM) || \
((MEMORY) == FMC_MEMORY_TYPE_PSRAM)|| \
((MEMORY) == FMC_MEMORY_TYPE_NOR))
/**
* @}
*/
/** @defgroup FMC_NORSRAM_Data_Width
* @{
*/
#define FMC_NORSRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
#define FMC_NORSRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
#define FMC_NORSRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020)
#define IS_FMC_NORSRAM_MEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_NORSRAM_MEM_BUS_WIDTH_8) || \
((WIDTH) == FMC_NORSRAM_MEM_BUS_WIDTH_16) || \
((WIDTH) == FMC_NORSRAM_MEM_BUS_WIDTH_32))
/**
* @}
*/
/** @defgroup FMC_NORSRAM_Flash_Access
* @{
*/
#define FMC_NORSRAM_FLASH_ACCESS_ENABLE ((uint32_t)0x00000040)
#define FMC_NORSRAM_FLASH_ACCESS_DISABLE ((uint32_t)0x00000000)
/**
* @}
*/
/** @defgroup FMC_Burst_Access_Mode
* @{
*/
#define FMC_BURST_ACCESS_MODE_DISABLE ((uint32_t)0x00000000)
#define FMC_BURST_ACCESS_MODE_ENABLE ((uint32_t)0x00000100)
#define IS_FMC_BURSTMODE(STATE) (((STATE) == FMC_BURST_ACCESS_MODE_DISABLE) || \
((STATE) == FMC_BURST_ACCESS_MODE_ENABLE))
/**
* @}
*/
/** @defgroup FMC_Wait_Signal_Polarity
* @{
*/
#define FMC_WAIT_SIGNAL_POLARITY_LOW ((uint32_t)0x00000000)
#define FMC_WAIT_SIGNAL_POLARITY_HIGH ((uint32_t)0x00000200)
#define IS_FMC_WAIT_POLARITY(POLARITY) (((POLARITY) == FMC_WAIT_SIGNAL_POLARITY_LOW) || \
((POLARITY) == FMC_WAIT_SIGNAL_POLARITY_HIGH))
/**
* @}
*/
/** @defgroup FMC_Wrap_Mode
* @{
*/
#define FMC_WRAP_MODE_DISABLE ((uint32_t)0x00000000)
#define FMC_WRAP_MODE_ENABLE ((uint32_t)0x00000400)
#define IS_FMC_WRAP_MODE(MODE) (((MODE) == FMC_WRAP_MODE_DISABLE) || \
((MODE) == FMC_WRAP_MODE_ENABLE))
/**
* @}
*/
/** @defgroup FMC_Wait_Timing
* @{
*/
#define FMC_WAIT_TIMING_BEFORE_WS ((uint32_t)0x00000000)
#define FMC_WAIT_TIMING_DURING_WS ((uint32_t)0x00000800)
#define IS_FMC_WAIT_SIGNAL_ACTIVE(ACTIVE) (((ACTIVE) == FMC_WAIT_TIMING_BEFORE_WS) || \
((ACTIVE) == FMC_WAIT_TIMING_DURING_WS))
/**
* @}
*/
/** @defgroup FMC_Write_Operation
* @{
*/
#define FMC_WRITE_OPERATION_DISABLE ((uint32_t)0x00000000)
#define FMC_WRITE_OPERATION_ENABLE ((uint32_t)0x00001000)
#define IS_FMC_WRITE_OPERATION(OPERATION) (((OPERATION) == FMC_WRITE_OPERATION_DISABLE) || \
((OPERATION) == FMC_WRITE_OPERATION_ENABLE))
/**
* @}
*/
/** @defgroup FMC_Wait_Signal
* @{
*/
#define FMC_WAIT_SIGNAL_DISABLE ((uint32_t)0x00000000)
#define FMC_WAIT_SIGNAL_ENABLE ((uint32_t)0x00002000)
#define IS_FMC_WAITE_SIGNAL(SIGNAL) (((SIGNAL) == FMC_WAIT_SIGNAL_DISABLE) || \
((SIGNAL) == FMC_WAIT_SIGNAL_ENABLE))
/**
* @}
*/
/** @defgroup FMC_Extended_Mode
* @{
*/
#define FMC_EXTENDED_MODE_DISABLE ((uint32_t)0x00000000)
#define FMC_EXTENDED_MODE_ENABLE ((uint32_t)0x00004000)
#define IS_FMC_EXTENDED_MODE(MODE) (((MODE) == FMC_EXTENDED_MODE_DISABLE) || \
((MODE) == FMC_EXTENDED_MODE_ENABLE))
/**
* @}
*/
/** @defgroup FMC_AsynchronousWait
* @{
*/
#define FMC_ASYNCHRONOUS_WAIT_DISABLE ((uint32_t)0x00000000)
#define FMC_ASYNCHRONOUS_WAIT_ENABLE ((uint32_t)0x00008000)
#define IS_FMC_ASYNWAIT(STATE) (((STATE) == FMC_ASYNCHRONOUS_WAIT_DISABLE) || \
((STATE) == FMC_ASYNCHRONOUS_WAIT_ENABLE))
/**
* @}
*/
/** @defgroup FMC_Write_Burst
* @{
*/
#define FMC_WRITE_BURST_DISABLE ((uint32_t)0x00000000)
#define FMC_WRITE_BURST_ENABLE ((uint32_t)0x00080000)
#define IS_FMC_WRITE_BURST(BURST) (((BURST) == FMC_WRITE_BURST_DISABLE) || \
((BURST) == FMC_WRITE_BURST_ENABLE))
/**
* @}
*/
/** @defgroup FMC_Continous_Clock
* @{
*/
#define FMC_CONTINUOUS_CLOCK_SYNC_ONLY ((uint32_t)0x00000000)
#define FMC_CONTINUOUS_CLOCK_SYNC_ASYNC ((uint32_t)0x00100000)
#define IS_FMC_CONTINOUS_CLOCK(CCLOCK) (((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \
((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC))
/**
* @}
*/
/** @defgroup FMC_Address_Setup_Time
* @{
*/
#define IS_FMC_ADDRESS_SETUP_TIME(TIME) ((TIME) <= 15)
/**
* @}
*/
/** @defgroup FMC_Address_Hold_Time
* @{
*/
#define IS_FMC_ADDRESS_HOLD_TIME(TIME) (((TIME) > 0) && ((TIME) <= 15))
/**
* @}
*/
/** @defgroup FMC_Data_Setup_Time
* @{
*/
#define IS_FMC_DATASETUP_TIME(TIME) (((TIME) > 0) && ((TIME) <= 255))
/**
* @}
*/
/** @defgroup FMC_Bus_Turn_around_Duration
* @{
*/
#define IS_FMC_TURNAROUND_TIME(TIME) ((TIME) <= 15)
/**
* @}
*/
/** @defgroup FMC_CLK_Division
* @{
*/
#define IS_FMC_CLK_DIV(DIV) (((DIV) > 1) && ((DIV) <= 16))
/**
* @}
*/
/** @defgroup FMC_Data_Latency
* @{
*/
#define IS_FMC_DATA_LATENCY(LATENCY) (((LATENCY) > 1) && ((LATENCY) <= 17))
/**
* @}
*/
/** @defgroup FMC_Access_Mode
* @{
*/
#define FMC_ACCESS_MODE_A ((uint32_t)0x00000000)
#define FMC_ACCESS_MODE_B ((uint32_t)0x10000000)
#define FMC_ACCESS_MODE_C ((uint32_t)0x20000000)
#define FMC_ACCESS_MODE_D ((uint32_t)0x30000000)
#define IS_FMC_ACCESS_MODE(MODE) (((MODE) == FMC_ACCESS_MODE_A) || \
((MODE) == FMC_ACCESS_MODE_B) || \
((MODE) == FMC_ACCESS_MODE_C) || \
((MODE) == FMC_ACCESS_MODE_D))
/**
* @}
*/
/**
* @}
*/
/** @defgroup FMC_NAND_Controller
* @{
*/
/** @defgroup FMC_NAND_Bank
* @{
*/
#define FMC_NAND_BANK2 ((uint32_t)0x00000010)
#define FMC_NAND_BANK3 ((uint32_t)0x00000100)
#define IS_FMC_NAND_BANK(BANK) (((BANK) == FMC_NAND_BANK2) || \
((BANK) == FMC_NAND_BANK3))
/**
* @}
*/
/** @defgroup FMC_Wait_feature
* @{
*/
#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE ((uint32_t)0x00000000)
#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE ((uint32_t)0x00000002)
#define IS_FMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \
((FEATURE) == FMC_NAND_PCC_WAIT_FEATURE_ENABLE))
/**
* @}
*/
/** @defgroup FMC_PCR_Memory_Type
* @{
*/
#define FMC_PCR_MEMORY_TYPE_PCCARD ((uint32_t)0x00000000)
#define FMC_PCR_MEMORY_TYPE_NAND ((uint32_t)0x00000008)
/**
* @}
*/
/** @defgroup FMC_NAND_Data_Width
* @{
*/
#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
#define IS_FMC_NAND_MEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_NAND_PCC_MEM_BUS_WIDTH_8) || \
((WIDTH) == FMC_NAND_PCC_MEM_BUS_WIDTH_16))
/**
* @}
*/
/** @defgroup FMC_ECC
* @{
*/
#define FMC_NAND_ECC_DISABLE ((uint32_t)0x00000000)
#define FMC_NAND_ECC_ENABLE ((uint32_t)0x00000040)
#define IS_FMC_ECC_STATE(STATE) (((STATE) == FMC_NAND_ECC_DISABLE) || \
((STATE) == FMC_NAND_ECC_ENABLE))
/**
* @}
*/
/** @defgroup FMC_ECC_Page_Size
* @{
*/
#define FMC_NAND_ECC_PAGE_SIZE_256BYTE ((uint32_t)0x00000000)
#define FMC_NAND_ECC_PAGE_SIZE_512BYTE ((uint32_t)0x00020000)
#define FMC_NAND_ECC_PAGE_SIZE_1024BYTE ((uint32_t)0x00040000)
#define FMC_NAND_ECC_PAGE_SIZE_2048BYTE ((uint32_t)0x00060000)
#define FMC_NAND_ECC_PAGE_SIZE_4096BYTE ((uint32_t)0x00080000)
#define FMC_NAND_ECC_PAGE_SIZE_8192BYTE ((uint32_t)0x000A0000)
#define IS_FMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FMC_NAND_ECC_PAGE_SIZE_256BYTE) || \
((SIZE) == FMC_NAND_ECC_PAGE_SIZE_512BYTE) || \
((SIZE) == FMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \
((SIZE) == FMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \
((SIZE) == FMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \
((SIZE) == FMC_NAND_ECC_PAGE_SIZE_8192BYTE))
/**
* @}
*/
/** @defgroup FMC_TCLR_Setup_Time
* @{
*/
#define IS_FMC_TCLR_TIME(TIME) ((TIME) <= 255)
/**
* @}
*/
/** @defgroup FMC_TAR_Setup_Time
* @{
*/
#define IS_FMC_TAR_TIME(TIME) ((TIME) <= 255)
/**
* @}
*/
/** @defgroup FMC_Setup_Time
* @{
*/
#define IS_FMC_SETUP_TIME(TIME) ((TIME) <= 255)
/**
* @}
*/
/** @defgroup FMC_Wait_Setup_Time
* @{
*/
#define IS_FMC_WAIT_TIME(TIME) ((TIME) <= 255)
/**
* @}
*/
/** @defgroup FMC_Hold_Setup_Time
* @{
*/
#define IS_FMC_HOLD_TIME(TIME) ((TIME) <= 255)
/**
* @}
*/
/** @defgroup FMC_HiZ_Setup_Time
* @{
*/
#define IS_FMC_HIZ_TIME(TIME) ((TIME) <= 255)
/**
* @}
*/
/**
* @}
*/
/** @defgroup FMC_SDRAM_Controller
* @{
*/
/** @defgroup FMC_SDRAM_Bank
* @{
*/
#define FMC_SDRAM_BANK1 ((uint32_t)0x00000000)
#define FMC_SDRAM_BANK2 ((uint32_t)0x00000001)
#define IS_FMC_SDRAM_BANK(BANK) (((BANK) == FMC_SDRAM_BANK1) || \
((BANK) == FMC_SDRAM_BANK2))
/**
* @}
*/
/** @defgroup FMC_SDRAM_Column_Bits_number
* @{
*/
#define FMC_SDRAM_COLUMN_BITS_NUM_8 ((uint32_t)0x00000000)
#define FMC_SDRAM_COLUMN_BITS_NUM_9 ((uint32_t)0x00000001)
#define FMC_SDRAM_COLUMN_BITS_NUM_10 ((uint32_t)0x00000002)
#define FMC_SDRAM_COLUMN_BITS_NUM_11 ((uint32_t)0x00000003)
#define IS_FMC_COLUMNBITS_NUMBER(COLUMN) (((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_8) || \
((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_9) || \
((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_10) || \
((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_11))
/**
* @}
*/
/** @defgroup FMC_SDRAM_Row_Bits_number
* @{
*/
#define FMC_SDRAM_ROW_BITS_NUM_11 ((uint32_t)0x00000000)
#define FMC_SDRAM_ROW_BITS_NUM_12 ((uint32_t)0x00000004)
#define FMC_SDRAM_ROW_BITS_NUM_13 ((uint32_t)0x00000008)
#define IS_FMC_ROWBITS_NUMBER(ROW) (((ROW) == FMC_SDRAM_ROW_BITS_NUM_11) || \
((ROW) == FMC_SDRAM_ROW_BITS_NUM_12) || \
((ROW) == FMC_SDRAM_ROW_BITS_NUM_13))
/**
* @}
*/
/** @defgroup FMC_SDRAM_Memory_Bus_Width
* @{
*/
#define FMC_SDRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000)
#define FMC_SDRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010)
#define FMC_SDRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020)
#define IS_FMC_SDMEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_8) || \
((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_16) || \
((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_32))
/**
* @}
*/
/** @defgroup FMC_SDRAM_Internal_Banks_Number
* @{
*/
#define FMC_SDRAM_INTERN_BANKS_NUM_2 ((uint32_t)0x00000000)
#define FMC_SDRAM_INTERN_BANKS_NUM_4 ((uint32_t)0x00000040)
#define IS_FMC_INTERNALBANK_NUMBER(NUMBER) (((NUMBER) == FMC_SDRAM_INTERN_BANKS_NUM_2) || \
((NUMBER) == FMC_SDRAM_INTERN_BANKS_NUM_4))
/**
* @}
*/
/** @defgroup FMC_SDRAM_CAS_Latency
* @{
*/
#define FMC_SDRAM_CAS_LATENCY_1 ((uint32_t)0x00000080)
#define FMC_SDRAM_CAS_LATENCY_2 ((uint32_t)0x00000100)
#define FMC_SDRAM_CAS_LATENCY_3 ((uint32_t)0x00000180)
#define IS_FMC_CAS_LATENCY(LATENCY) (((LATENCY) == FMC_SDRAM_CAS_LATENCY_1) || \
((LATENCY) == FMC_SDRAM_CAS_LATENCY_2) || \
((LATENCY) == FMC_SDRAM_CAS_LATENCY_3))
/**
* @}
*/
/** @defgroup FMC_SDRAM_Write_Protection
* @{
*/
#define FMC_SDRAM_WRITE_PROTECTION_DISABLE ((uint32_t)0x00000000)
#define FMC_SDRAM_WRITE_PROTECTION_ENABLE ((uint32_t)0x00000200)
#define IS_FMC_WRITE_PROTECTION(WRITE) (((WRITE) == FMC_SDRAM_WRITE_PROTECTION_DISABLE) || \
((WRITE) == FMC_SDRAM_WRITE_PROTECTION_ENABLE))
/**
* @}
*/
/** @defgroup FMC_SDRAM_Clock_Period
* @{
*/
#define FMC_SDRAM_CLOCK_DISABLE ((uint32_t)0x00000000)
#define FMC_SDRAM_CLOCK_PERIOD_2 ((uint32_t)0x00000800)
#define FMC_SDRAM_CLOCK_PERIOD_3 ((uint32_t)0x00000C00)
#define IS_FMC_SDCLOCK_PERIOD(PERIOD) (((PERIOD) == FMC_SDRAM_CLOCK_DISABLE) || \
((PERIOD) == FMC_SDRAM_CLOCK_PERIOD_2) || \
((PERIOD) == FMC_SDRAM_CLOCK_PERIOD_3))
/**
* @}
*/
/** @defgroup FMC_SDRAM_Read_Burst
* @{
*/
#define FMC_SDRAM_RBURST_DISABLE ((uint32_t)0x00000000)
#define FMC_SDRAM_RBURST_ENABLE ((uint32_t)0x00001000)
#define IS_FMC_READ_BURST(RBURST) (((RBURST) == FMC_SDRAM_RBURST_DISABLE) || \
((RBURST) == FMC_SDRAM_RBURST_ENABLE))
/**
* @}
*/
/** @defgroup FMC_SDRAM_Read_Pipe_Delay
* @{
*/
#define FMC_SDRAM_RPIPE_DELAY_0 ((uint32_t)0x00000000)
#define FMC_SDRAM_RPIPE_DELAY_1 ((uint32_t)0x00002000)
#define FMC_SDRAM_RPIPE_DELAY_2 ((uint32_t)0x00004000)
#define IS_FMC_READPIPE_DELAY(DELAY) (((DELAY) == FMC_SDRAM_RPIPE_DELAY_0) || \
((DELAY) == FMC_SDRAM_RPIPE_DELAY_1) || \
((DELAY) == FMC_SDRAM_RPIPE_DELAY_2))
/**
* @}
*/
/** @defgroup FMC_SDRAM_LoadToActive_Delay
* @{
*/
#define IS_FMC_LOADTOACTIVE_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
/**
* @}
*/
/** @defgroup FMC_SDRAM_ExitSelfRefresh_Delay
* @{
*/
#define IS_FMC_EXITSELFREFRESH_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
/**
* @}
*/
/** @defgroup FMC_SDRAM_SelfRefresh_Time
* @{
*/
#define IS_FMC_SELFREFRESH_TIME(TIME) (((TIME) > 0) && ((TIME) <= 16))
/**
* @}
*/
/** @defgroup FMC_SDRAM_RowCycle_Delay
* @{
*/
#define IS_FMC_ROWCYCLE_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
/**
* @}
*/
/** @defgroup FMC_SDRAM_Write_Recovery_Time
* @{
*/
#define IS_FMC_WRITE_RECOVERY_TIME(TIME) (((TIME) > 0) && ((TIME) <= 16))
/**
* @}
*/
/** @defgroup FMC_SDRAM_RP_Delay
* @{
*/
#define IS_FMC_RP_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
/**
* @}
*/
/** @defgroup FMC_SDRAM_RCD_Delay
* @{
*/
#define IS_FMC_RCD_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16))
/**
* @}
*/
/** @defgroup FMC_SDRAM_Command_Mode
* @{
*/
#define FMC_SDRAM_CMD_NORMAL_MODE ((uint32_t)0x00000000)
#define FMC_SDRAM_CMD_CLK_ENABLE ((uint32_t)0x00000001)
#define FMC_SDRAM_CMD_PALL ((uint32_t)0x00000002)
#define FMC_SDRAM_CMD_AUTOREFRESH_MODE ((uint32_t)0x00000003)
#define FMC_SDRAM_CMD_LOAD_MODE ((uint32_t)0x00000004)
#define FMC_SDRAM_CMD_SELFREFRESH_MODE ((uint32_t)0x00000005)
#define FMC_SDRAM_CMD_POWERDOWN_MODE ((uint32_t)0x00000006)
#define IS_FMC_COMMAND_MODE(COMMAND) (((COMMAND) == FMC_SDRAM_CMD_NORMAL_MODE) || \
((COMMAND) == FMC_SDRAM_CMD_CLK_ENABLE) || \
((COMMAND) == FMC_SDRAM_CMD_PALL) || \
((COMMAND) == FMC_SDRAM_CMD_AUTOREFRESH_MODE) || \
((COMMAND) == FMC_SDRAM_CMD_LOAD_MODE) || \
((COMMAND) == FMC_SDRAM_CMD_SELFREFRESH_MODE) || \
((COMMAND) == FMC_SDRAM_CMD_POWERDOWN_MODE))
/**
* @}
*/
/** @defgroup FMC_SDRAM_Command_Target
* @{
*/
#define FMC_SDRAM_CMD_TARGET_BANK2 FMC_SDCMR_CTB2
#define FMC_SDRAM_CMD_TARGET_BANK1 FMC_SDCMR_CTB1
#define FMC_SDRAM_CMD_TARGET_BANK1_2 ((uint32_t)0x00000018)
#define IS_FMC_COMMAND_TARGET(TARGET) (((TARGET) == FMC_SDRAM_CMD_TARGET_BANK1) || \
((TARGET) == FMC_SDRAM_CMD_TARGET_BANK2) || \
((TARGET) == FMC_SDRAM_CMD_TARGET_BANK1_2))
/**
* @}
*/
/** @defgroup FMC_SDRAM_AutoRefresh_Number
* @{
*/
#define IS_FMC_AUTOREFRESH_NUMBER(NUMBER) (((NUMBER) > 0) && ((NUMBER) <= 16))
/**
* @}
*/
/** @defgroup FMC_SDRAM_ModeRegister_Definition
* @{
*/
#define IS_FMC_MODE_REGISTER(CONTENT) ((CONTENT) <= 8191)
/**
* @}
*/
/** @defgroup FMC_SDRAM_Refresh_rate
* @{
*/
#define IS_FMC_REFRESH_RATE(RATE) ((RATE) <= 8191)
/**
* @}
*/
/** @defgroup FMC_SDRAM_Mode_Status
* @{
*/
#define FMC_SDRAM_NORMAL_MODE ((uint32_t)0x00000000)
#define FMC_SDRAM_SELF_REFRESH_MODE FMC_SDSR_MODES1_0
#define FMC_SDRAM_POWER_DOWN_MODE FMC_SDSR_MODES1_1
/**
* @}
*/
/** @defgroup FMC_NORSRAM_Device_Instance
* @{
*/
#define IS_FMC_NORSRAM_DEVICE(INSTANCE) ((INSTANCE) == FMC_NORSRAM_DEVICE)
/**
* @}
*/
/** @defgroup FMC_NORSRAM_EXTENDED_Device_Instance
* @{
*/
#define IS_FMC_NORSRAM_EXTENDED_DEVICE(INSTANCE) ((INSTANCE) == FMC_NORSRAM_EXTENDED_DEVICE)
/**
* @}
*/
/** @defgroup FMC_NAND_Device_Instance
* @{
*/
#define IS_FMC_NAND_DEVICE(INSTANCE) ((INSTANCE) == FMC_NAND_DEVICE)
/**
* @}
*/
/** @defgroup FMC_PCCARD_Device_Instance
* @{
*/
#define IS_FMC_PCCARD_DEVICE(INSTANCE) ((INSTANCE) == FMC_PCCARD_DEVICE)
/**
* @}
*/
/** @defgroup FMC_SDRAM_Device_Instance
* @{
*/
#define IS_FMC_SDRAM_DEVICE(INSTANCE) ((INSTANCE) == FMC_SDRAM_DEVICE)
/**
* @}
*/
/**
* @}
*/
/** @defgroup FMC_Interrupt_definition
* @brief FMC Interrupt definition
* @{
*/
#define FMC_IT_RISING_EDGE ((uint32_t)0x00000008)
#define FMC_IT_LEVEL ((uint32_t)0x00000010)
#define FMC_IT_FALLING_EDGE ((uint32_t)0x00000020)
#define FMC_IT_REFRESH_ERROR ((uint32_t)0x00004000)
#define IS_FMC_IT(IT) ((((IT) & (uint32_t)0xFFFFBFC7) == 0x00000000) && ((IT) != 0x00000000))
#define IS_FMC_GET_IT(IT) (((IT) == FMC_IT_RISING_EDGE) || \
((IT) == FMC_IT_LEVEL) || \
((IT) == FMC_IT_FALLING_EDGE) || \
((IT) == FMC_IT_REFRESH_ERROR))
/**
* @}
*/
/** @defgroup FMC_Flag_definition
* @brief FMC Flag definition
* @{
*/
#define FMC_FLAG_RISING_EDGE ((uint32_t)0x00000001)
#define FMC_FLAG_LEVEL ((uint32_t)0x00000002)
#define FMC_FLAG_FALLING_EDGE ((uint32_t)0x00000004)
#define FMC_FLAG_FEMPT ((uint32_t)0x00000040)
#define FMC_SDRAM_FLAG_REFRESH_IT FMC_SDSR_RE
#define FMC_SDRAM_FLAG_BUSY FMC_SDSR_BUSY
#define FMC_SDRAM_FLAG_REFRESH_ERROR FMC_SDRTR_CRE
#define IS_FMC_GET_FLAG(FLAG) (((FLAG) == FMC_FLAG_RISING_EDGE) || \
((FLAG) == FMC_FLAG_LEVEL) || \
((FLAG) == FMC_FLAG_FALLING_EDGE) || \
((FLAG) == FMC_FLAG_FEMPT) || \
((FLAG) == FMC_SDRAM_FLAG_REFRESH_IT) || \
((FLAG) == FMC_SDRAM_FLAG_BUSY))
#define IS_FMC_CLEAR_FLAG(FLAG) ((((FLAG) & (uint32_t)0xFFFFFFF8) == 0x00000000) && ((FLAG) != 0x00000000))
/**
* @}
*/
/* Exported macro ------------------------------------------------------------*/
/** @defgroup FMC_NOR_Macros
* @brief macros to handle NOR device enable/disable and read/write operations
* @{
*/
/**
* @brief Enable the NORSRAM device access.
* @param __INSTANCE__: FMC_NORSRAM Instance
* @param __BANK__: FMC_NORSRAM Bank
* @retval None
*/
#define __FMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] |= FMC_BCR1_MBKEN)
/**
* @brief Disable the NORSRAM device access.
* @param __INSTANCE__: FMC_NORSRAM Instance
* @param __BANK__: FMC_NORSRAM Bank
* @retval None
*/
#define __FMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] &= ~FMC_BCR1_MBKEN)
/**
* @}
*/
/** @defgroup FMC_NAND_Macros
* @brief macros to handle NAND device enable/disable
* @{
*/
/**
* @brief Enable the NAND device access.
* @param __INSTANCE__: FMC_NAND Instance
* @param __BANK__: FMC_NAND Bank
* @retval None
*/
#define __FMC_NAND_ENABLE(__INSTANCE__, __BANK__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FMC_PCR2_PBKEN): \
((__INSTANCE__)->PCR3 |= FMC_PCR3_PBKEN))
/**
* @brief Disable the NAND device access.
* @param __INSTANCE__: FMC_NAND Instance
* @param __BANK__: FMC_NAND Bank
* @retval None
*/
#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 &= ~FMC_PCR2_PBKEN): \
((__INSTANCE__)->PCR3 &= ~FMC_PCR3_PBKEN))
/**
* @}
*/
/** @defgroup FMC_PCCARD_Macros
* @brief macros to handle SRAM read/write operations
* @{
*/
/**
* @brief Enable the PCCARD device access.
* @param __INSTANCE__: FMC_PCCARD Instance
* @retval None
*/
#define __FMC_PCCARD_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 |= FMC_PCR4_PBKEN)
/**
* @brief Disable the PCCARD device access.
* @param __INSTANCE__: FMC_PCCARD Instance
* @retval None
*/
#define __FMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FMC_PCR4_PBKEN)
/**
* @}
*/
/** @defgroup FMC_Interrupt
* @brief macros to handle FMC interrupts
* @{
*/
/**
* @brief Enable the NAND device interrupt.
* @param __INSTANCE__: FMC_NAND instance
* @param __BANK__: FMC_NAND Bank
* @param __INTERRUPT__: FMC_NAND interrupt
* This parameter can be any combination of the following values:
* @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
* @arg FMC_IT_LEVEL: Interrupt level.
* @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
* @retval None
*/
#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 |= (__INTERRUPT__)): \
((__INSTANCE__)->SR3 |= (__INTERRUPT__)))
/**
* @brief Disable the NAND device interrupt.
* @param __INSTANCE__: FMC_NAND handle
* @param __BANK__: FMC_NAND Bank
* @param __INTERRUPT__: FMC_NAND interrupt
* This parameter can be any combination of the following values:
* @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
* @arg FMC_IT_LEVEL: Interrupt level.
* @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
* @retval None
*/
#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__INTERRUPT__)): \
((__INSTANCE__)->SR3 &= ~(__INTERRUPT__)))
/**
* @brief Get flag status of the NAND device.
* @param __INSTANCE__: FMC_NAND handle
* @param __BANK__: FMC_NAND Bank
* @param __FLAG__: FMC_NAND flag
* This parameter can be any combination of the following values:
* @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
* @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
* @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
* @arg FMC_FLAG_FEMPT: FIFO empty flag.
* @retval The state of FLAG (SET or RESET).
*/
#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FMC_NAND_BANK2)? (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)): \
(((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__)))
/**
* @brief Clear flag status of the NAND device.
* @param __INSTANCE__: FMC_NAND handle
* @param __BANK__: FMC_NAND Bank
* @param __FLAG__: FMC_NAND flag
* This parameter can be any combination of the following values:
* @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
* @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
* @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
* @arg FMC_FLAG_FEMPT: FIFO empty flag.
* @retval None
*/
#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__FLAG__)): \
((__INSTANCE__)->SR3 &= ~(__FLAG__)))
/**
* @brief Enable the PCCARD device interrupt.
* @param __INSTANCE__: FMC_PCCARD instance
* @param __INTERRUPT__: FMC_PCCARD interrupt
* This parameter can be any combination of the following values:
* @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
* @arg FMC_IT_LEVEL: Interrupt level.
* @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
* @retval None
*/
#define __FMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 |= (__INTERRUPT__))
/**
* @brief Disable the PCCARD device interrupt.
* @param __INSTANCE__: FMC_PCCARD instance
* @param __INTERRUPT__: FMC_PCCARD interrupt
* This parameter can be any combination of the following values:
* @arg FMC_IT_RISING_EDGE: Interrupt rising edge.
* @arg FMC_IT_LEVEL: Interrupt level.
* @arg FMC_IT_FALLING_EDGE: Interrupt falling edge.
* @retval None
*/
#define __FMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 &= ~(__INTERRUPT__))
/**
* @brief Get flag status of the PCCARD device.
* @param __INSTANCE__: FMC_PCCARD instance
* @param __FLAG__: FMC_PCCARD flag
* This parameter can be any combination of the following values:
* @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
* @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
* @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
* @arg FMC_FLAG_FEMPT: FIFO empty flag.
* @retval The state of FLAG (SET or RESET).
*/
#define __FMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__))
/**
* @brief Clear flag status of the PCCARD device.
* @param __INSTANCE__: FMC_PCCARD instance
* @param __FLAG__: FMC_PCCARD flag
* This parameter can be any combination of the following values:
* @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag.
* @arg FMC_FLAG_LEVEL: Interrupt level edge flag.
* @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag.
* @arg FMC_FLAG_FEMPT: FIFO empty flag.
* @retval None
*/
#define __FMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR4 &= ~(__FLAG__))
/**
* @brief Enable the SDRAM device interrupt.
* @param __INSTANCE__: FMC_SDRAM instance
* @param __INTERRUPT__: FMC_SDRAM interrupt
* This parameter can be any combination of the following values:
* @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error
* @retval None
*/
#define __FMC_SDRAM_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR |= (__INTERRUPT__))
/**
* @brief Disable the SDRAM device interrupt.
* @param __INSTANCE__: FMC_SDRAM instance
* @param __INTERRUPT__: FMC_SDRAM interrupt
* This parameter can be any combination of the following values:
* @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error
* @retval None
*/
#define __FMC_SDRAM_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR &= ~(__INTERRUPT__))
/**
* @brief Get flag status of the SDRAM device.
* @param __INSTANCE__: FMC_SDRAM instance
* @param __FLAG__: FMC_SDRAM flag
* This parameter can be any combination of the following values:
* @arg FMC_SDRAM_FLAG_REFRESH_IT: Interrupt refresh error.
* @arg FMC_SDRAM_FLAG_BUSY: SDRAM busy flag.
* @arg FMC_SDRAM_FLAG_REFRESH_ERROR: Refresh error flag.
* @retval The state of FLAG (SET or RESET).
*/
#define __FMC_SDRAM_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SDSR &(__FLAG__)) == (__FLAG__))
/**
* @brief Clear flag status of the SDRAM device.
* @param __INSTANCE__: FMC_SDRAM instance
* @param __FLAG__: FMC_SDRAM flag
* This parameter can be any combination of the following values:
* @arg FMC_SDRAM_FLAG_REFRESH_ERROR
* @retval None
*/
#define __FMC_SDRAM_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SDRTR |= (__FLAG__))
/**
* @}
*/
/* Exported functions --------------------------------------------------------*/
/* FMC_NORSRAM Controller functions *******************************************/
/* Initialization/de-initialization functions */
HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_InitTypeDef *Init);
HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank);
HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode);
HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank);
/* FMC_NORSRAM Control functions */
HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank);
/* FMC_NAND Controller functions **********************************************/
/* Initialization/de-initialization functions */
HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init);
HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank);
HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank);
/* FMC_NAND Control functions */
HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank);
HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank);
HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout);
/* FMC_PCCARD Controller functions ********************************************/
/* Initialization/de-initialization functions */
HAL_StatusTypeDef FMC_PCCARD_Init(FMC_PCCARD_TypeDef *Device, FMC_PCCARD_InitTypeDef *Init);
HAL_StatusTypeDef FMC_PCCARD_CommonSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
HAL_StatusTypeDef FMC_PCCARD_AttributeSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
HAL_StatusTypeDef FMC_PCCARD_IOSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing);
HAL_StatusTypeDef FMC_PCCARD_DeInit(FMC_PCCARD_TypeDef *Device);
/* FMC_SDRAM Controller functions *********************************************/
/* Initialization/de-initialization functions */
HAL_StatusTypeDef FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init);
HAL_StatusTypeDef FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank);
HAL_StatusTypeDef FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
/* FMC_SDRAM Control functions */
HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
HAL_StatusTypeDef FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout);
HAL_StatusTypeDef FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate);
HAL_StatusTypeDef FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, uint32_t AutoRefreshNumber);
uint32_t FMC_SDRAM_GetModeStatus(FMC_SDRAM_TypeDef *Device, uint32_t Bank);
#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __STM32F4xx_LL_FMC_H */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
