//======================================================================
//
// coretest_trng.v
// -----------------
// Top level wrapper that creates the Cryptech coretest system.
// The wrapper contains instances of external interface, coretest
// and the cores to be tested. And if more than one core is
// present the wrapper also includes address and data muxes.
//
//
// Author: Joachim Strombergson
// Copyright (c) 2014, SUNET
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or
// without modification, are permitted provided that the following
// conditions are met:
//
// 1. Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// 2. Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in
// the documentation and/or other materials provided with the
// distribution.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//======================================================================
module coretest_trng(
input wire clk,
input wire reset_n,
input noise,
// External interface.
input wire SCL,
input wire SDA,
output wire SDA_pd,
output wire [7 : 0] debug
);
//----------------------------------------------------------------
// Internal constant and parameter definitions.
//----------------------------------------------------------------
parameter I2C_ADDR_PREFIX = 4'h0;
parameter TRNG_ADDR_PREFIX = 4'h2;
//----------------------------------------------------------------
// Wires.
//----------------------------------------------------------------
// Coretest connections.
wire coretest_reset_n;
wire coretest_cs;
wire coretest_we;
wire [15 : 0] coretest_address;
wire [31 : 0] coretest_write_data;
reg [31 : 0] coretest_read_data;
reg coretest_error;
// i2c connections
wire i2c_rxd_syn;
wire [7 : 0] i2c_rxd_data;
wire i2c_rxd_ack;
wire i2c_txd_syn;
wire [7 : 0] i2c_txd_data;
wire i2c_txd_ack;
reg i2c_cs;
reg i2c_we;
reg [7 : 0] i2c_address;
reg [31 : 0] i2c_write_data;
wire [31 : 0] i2c_read_data;
wire i2c_error;
wire [7 : 0] i2c_debug;
// trng connections.
wire trng_noise;
reg trng_cs;
reg trng_we;
reg [7 : 0] trng_address;
reg [31 : 0] trng_write_data;
wire [31 : 0] trng_read_data;
wire trng_error;
wire [7 : 0] trng_debug;
wire trng_debug_update;
wire trng_security_error;
//----------------------------------------------------------------
// Concurrent assignment.
//----------------------------------------------------------------
assign debug = trng_debug;
assign trng_debug_update = 1;
//----------------------------------------------------------------
// Core instantiations.
//----------------------------------------------------------------
coretest coretest_inst(
.clk(clk),
.reset_n(reset_n),
.rx_syn(i2c_rxd_syn),
.rx_data(i2c_rxd_data),
.rx_ack(i2c_rxd_ack),
.tx_syn(i2c_txd_syn),
.tx_data(i2c_txd_data),
.tx_ack(i2c_txd_ack),
.core_reset_n(coretest_reset_n),
.core_cs(coretest_cs),
.core_we(coretest_we),
.core_address(coretest_address),
.core_write_data(coretest_write_data),
.core_read_data(coretest_read_data),
.core_error(coretest_error)
);
i2c i2c_inst(
.clk(clk),
.reset_n(!reset_n),
.SCL(SCL),
.SDA(SDA),
.SDA_pd(SDA_pd),
.i2c_device_addr(8'h1E),
.rxd_syn(i2c_rxd_syn),
.rxd_data(i2c_rxd_data),
.rxd_ack(i2c_rxd_ack),
.txd_syn(i2c_txd_syn),
.txd_data(i2c_txd_data),
.txd_ack(i2c_txd_ack),
.cs(i2c_cs),
.we(i2c_we),
.address(i2c_address),
.write_data(i2c_write_data),
.read_data(i2c_read_data),
.error(i2c_error),
.debug(i2c_debug)
);
trng trng_inst(
// Clock and reset.
.clk(clk),
.reset_n(reset_n),
.avalanche_noise(noise),
.cs(trng_cs),
.we(trng_we),
.address(trng_address),
.write_data(trng_write_data),
.read_data(trng_read_data),
.error(trng_error),
.debug(trng_debug),
.debug_update(trng_debug_update),
.security_error(trng_security_error)
);
//----------------------------------------------------------------
// address_mux
//
// Combinational data mux that handles addressing between
// cores using the 32-bit memory like interface.
//----------------------------------------------------------------
always @*
begin : address_mux
// Default assignments.
coretest_read_data = 32'h00000000;
coretest_error = 0;
i2c_cs = 0;
i2c_we = 0;
i2c_address = 8'h00;
i2c_write_data = 32'h00000000;
trng_cs = 0;
trng_we = 0;
trng_address = 8'h00;
trng_write_data = 32'h00000000;
case (coretest_address[15 : 12])
I2C_ADDR_PREFIX:
begin
i2c_cs = coretest_cs;
i2c_we = coretest_we;
i2c_address = coretest_address[7 : 0];
i2c_write_data = coretest_write_data;
coretest_read_data = i2c_read_data;
coretest_error = i2c_error;
end
TRNG_ADDR_PREFIX:
begin
trng_cs = coretest_cs;
trng_we = coretest_we;
trng_address = coretest_address[11 : 0];
trng_write_data = coretest_write_data;
coretest_read_data = trng_read_data;
coretest_error = trng_error;
end
default:
begin
end
endcase // case (coretest_address[15 : 8])
end // address_mux
endmodule // coretest_trng
//======================================================================
// EOF coretest_trng.v
//======================================================================
