1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
|
/*
* Test code that just sends the letters 'a' to 'z' over and
* over again using USART2.
*
* Toggles the BLUE LED slowly and the RED LED for every
* character sent.
*/
#include "stm-init.h"
#include "stm-led.h"
#include "stm-uart.h"
void test_for_shorts(char port, GPIO_TypeDef* GPIOx, uint16_t GPIO_Test_Pins);
//------------------------------------------------------------------------------
// Defines
//------------------------------------------------------------------------------
//------------------------------------------------------------------------------
// Macros
//------------------------------------------------------------------------------
/* These are all the pins used by the FMC interface */
#define GPIOB_PINS (GPIO_PIN_7)
#define GPIOD_PINS (GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 \
|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15 \
|GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_3|GPIO_PIN_4 \
|GPIO_PIN_5|GPIO_PIN_6|GPIO_PIN_7)
#define GPIOE_PINS (GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_7 \
|GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 \
|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15)
#define GPIOF_PINS (GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 \
|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_12|GPIO_PIN_13 \
|GPIO_PIN_14|GPIO_PIN_15)
#define GPIOG_PINS (GPIO_PIN_0|GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_3 \
|GPIO_PIN_4|GPIO_PIN_5)
#define GPIOH_PINS (GPIO_PIN_8|GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_11 \
|GPIO_PIN_12|GPIO_PIN_13|GPIO_PIN_14|GPIO_PIN_15)
#define GPIOI_PINS (GPIO_PIN_9|GPIO_PIN_10|GPIO_PIN_0|GPIO_PIN_1 \
|GPIO_PIN_2|GPIO_PIN_3|GPIO_PIN_6|GPIO_PIN_7)
int
main()
{
stm_init();
// enable gpio clocks
__GPIOA_CLK_ENABLE();
__GPIOB_CLK_ENABLE();
__GPIOD_CLK_ENABLE();
__GPIOE_CLK_ENABLE();
__GPIOF_CLK_ENABLE();
__GPIOG_CLK_ENABLE();
__GPIOH_CLK_ENABLE();
__GPIOI_CLK_ENABLE();
while (1) {
HAL_GPIO_TogglePin(LED_PORT, LED_GREEN);
uart_send_string("\r\n\r\n\r\n\r\n\r\n");
test_for_shorts('B', GPIOB, GPIOB_PINS);
test_for_shorts('D', GPIOD, GPIOD_PINS);
test_for_shorts('E', GPIOE, GPIOE_PINS);
test_for_shorts('F', GPIOF, GPIOF_PINS);
test_for_shorts('G', GPIOG, GPIOG_PINS);
test_for_shorts('H', GPIOH, GPIOH_PINS);
test_for_shorts('I', GPIOI, GPIOI_PINS);
led_toggle(LED_BLUE);
HAL_Delay(2000);
}
}
void configure_all_as_input(GPIO_TypeDef* GPIOx, uint16_t GPIO_Test_Pins)
{
GPIO_InitTypeDef GPIO_InitStruct;
/* Configure all pins as input. XXX do all pins (0xffff) instead of just GPIO_Test_Pins? */
GPIO_InitStruct.Pin = GPIO_Test_Pins;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
HAL_GPIO_Init(GPIOx, &GPIO_InitStruct);
}
uint8_t check_no_input(char port, GPIO_TypeDef* GPIOx, uint16_t GPIO_Test_Pins, char wrote_port, uint16_t wrote_value)
{
uint16_t read;
/* Read all pins from port at once. XXX check all pins, not just GPIO_Test_Pins? */
read = (GPIOx->IDR & GPIO_Test_Pins);
if (! read) {
/* No unexpected pins read as HIGH */
return 0;
}
led_on(LED_RED);
uart_send_string("Wrote ");
uart_send_binary(wrote_value, 16);
uart_send_string(" to port GPIO");
uart_send_char(wrote_port);
uart_send_string(", read ");
uart_send_binary(read, 16);
uart_send_string(" from GPIO");
uart_send_char(port);
uart_send_string("\r\n");
return 1;
}
void test_for_shorts(char port, GPIO_TypeDef* GPIOx, uint16_t GPIO_Test_Pins)
{
GPIO_InitTypeDef GPIO_InitStruct;
uint16_t i, fail = 0, Test_Pin, read;
configure_all_as_input(GPIOB, GPIOB_PINS);
configure_all_as_input(GPIOD, GPIOD_PINS);
configure_all_as_input(GPIOE, GPIOE_PINS);
configure_all_as_input(GPIOF, GPIOF_PINS);
configure_all_as_input(GPIOG, GPIOG_PINS);
configure_all_as_input(GPIOH, GPIOH_PINS);
configure_all_as_input(GPIOI, GPIOI_PINS);
check_no_input('B', GPIOB, GPIOB_PINS, 'x', 0);
check_no_input('D', GPIOD, GPIOD_PINS, 'x', 0);
check_no_input('E', GPIOE, GPIOE_PINS, 'x', 0);
check_no_input('F', GPIOF, GPIOF_PINS, 'x', 0);
check_no_input('G', GPIOG, GPIOG_PINS, 'x', 0);
check_no_input('H', GPIOH, GPIOH_PINS, 'x', 0);
check_no_input('I', GPIOI, GPIOI_PINS, 'x', 0);
for (i = 0; i < 31; i++) {
Test_Pin = 1 << i;
if (! (GPIO_Test_Pins & Test_Pin)) continue;
configure_all_as_input(GPIOx, GPIO_Test_Pins);
/* Change one pin to output */
GPIO_InitStruct.Pin = Test_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
HAL_GPIO_Init(GPIOx, &GPIO_InitStruct);
HAL_GPIO_WritePin(GPIOx, Test_Pin, GPIO_PIN_SET);
/* Slight delay after setting the output pin. Without this, the Test_Pin
bit might read as zero, as it is only sampled once every AHB1 clock cycle.
Reference manual DM00031020 section 8.3.1.
*/
HAL_Delay(1);
/* Read all input GPIOs from port at once. XXX check all pins, not just GPIO_Test_Pins? */
read = GPIOx->IDR & GPIO_Test_Pins;
if (read == Test_Pin) {
/* No unexpected pins read as HIGH */
led_toggle(LED_GREEN);
} else {
led_on(LED_RED);
uart_send_string("GPIO");
uart_send_char(port);
uart_send_string(" exp ");
uart_send_binary(Test_Pin, 16);
uart_send_string(" got ");
uart_send_binary(read, 16);
uart_send_string(" diff ");
uart_send_binary(read ^ Test_Pin, 16);
uart_send_string("\r\n");
fail++;
}
/* Check there is no input on any of the other GPIO ports (adjacent pins might live on different ports) */
if (port != 'B') fail += check_no_input('B', GPIOB, GPIOB_PINS, port, Test_Pin);
if (port != 'D') fail += check_no_input('D', GPIOD, GPIOD_PINS, port, Test_Pin);
if (port != 'E') fail += check_no_input('E', GPIOE, GPIOE_PINS, port, Test_Pin);
if (port != 'F') fail += check_no_input('F', GPIOF, GPIOF_PINS, port, Test_Pin);
if (port != 'G') fail += check_no_input('G', GPIOG, GPIOG_PINS, port, Test_Pin);
if (port != 'H') fail += check_no_input('H', GPIOH, GPIOH_PINS, port, Test_Pin);
if (port != 'I') fail += check_no_input('I', GPIOI, GPIOI_PINS, port, Test_Pin);
HAL_GPIO_WritePin(GPIOx, Test_Pin, GPIO_PIN_RESET);
}
if (fail) {
uart_send_string("\r\n");
}
}
|
