aboutsummaryrefslogtreecommitdiff
path: root/Makefile
blob: 57ed42ca3beb5b147170aa40e9421506ef297930 (plain) (blame)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
# Copyright (c) 2015-2016, NORDUnet A/S
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are
# met:
# - Redistributions of source code must retain the above copyright notice,
#   this list of conditions and the following disclaimer.
#
# - Redistributions in binary form must reproduce the above copyright
#   notice, this list of conditions and the following disclaimer in the
#   documentation and/or other materials provided with the distribution.
#
# - Neither the name of the NORDUnet nor the names of its contributors may
#   be used to endorse or promote products derived from this software
#   without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
# IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
# TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
# PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
# HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
# TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

# absolute path, because we're going to be passing things to sub-makes
export TOPLEVEL = $(shell pwd)

# define board: dev-bridge or alpha
BOARD = TARGET_CRYPTECH_ALPHA

# Location of the Libraries folder from the STM32F4 Standard Peripheral Library
LIBS_DIR = $(TOPLEVEL)/libraries
MBED_DIR = $(LIBS_DIR)/mbed
CMSIS_DIR = $(MBED_DIR)/targets/cmsis/TARGET_STM/TARGET_STM32F4
BOARD_DIR = $(CMSIS_DIR)/$(BOARD)
RTOS_DIR = $(MBED_DIR)/rtos
export LIBTFM_DIR = $(LIBS_DIR)/thirdparty/libtfm
export LIBHAL_DIR = $(LIBS_DIR)/libhal
export LIBCLI_DIR = $(LIBS_DIR)/libcli

export LIBS = $(MBED_DIR)/libstmf4.a $(RTOS_DIR)/librtos.a

# linker script
export LDSCRIPT = $(BOARD_DIR)/TOOLCHAIN_GCC_ARM/STM32F429BI.ld

# board-specific objects, to link into every project
export BOARD_OBJS = \
	$(TOPLEVEL)/stm-init.o \
	$(TOPLEVEL)/stm-fmc.o \
	$(TOPLEVEL)/stm-uart.o \
	$(TOPLEVEL)/stm-rtc.o \
	$(TOPLEVEL)/spiflash_n25q128.o \
	$(TOPLEVEL)/stm-fpgacfg.o \
	$(TOPLEVEL)/stm-keystore.o \
	$(TOPLEVEL)/stm-sdram.o \
	$(TOPLEVEL)/syscalls.o \
	$(BOARD_DIR)/TOOLCHAIN_GCC_ARM/startup_stm32f429xx.o \
	$(BOARD_DIR)/system_stm32f4xx.o \
	$(BOARD_DIR)/stm32f4xx_hal_msp.o

# cross-building tools
PREFIX=arm-none-eabi-
export CC=$(PREFIX)gcc
export AS=$(PREFIX)as
export AR=$(PREFIX)ar
export OBJCOPY=$(PREFIX)objcopy
export OBJDUMP=$(PREFIX)objdump
export SIZE=$(PREFIX)size

# whew, that's a lot of cflags
CFLAGS  = -ggdb -O2 -Wall -Warray-bounds #-Wextra
CFLAGS += -mcpu=cortex-m4 -mthumb -mlittle-endian -mthumb-interwork
CFLAGS += -mfloat-abi=hard -mfpu=fpv4-sp-d16
CFLAGS += -DUSE_STDPERIPH_DRIVER -DSTM32F4XX -DSTM32F429xx
CFLAGS += -D__CORTEX_M4 -DTARGET_STM -DTARGET_STM32F4 -DTARGET_STM32F429ZI -DTOOLCHAIN_GCC -D__FPU_PRESENT=1 -D$(BOARD)
CFLAGS += -ffunction-sections -fdata-sections -Wl,--gc-sections
CFLAGS += -std=c99
CFLAGS += -I $(TOPLEVEL)
CFLAGS += -I $(MBED_DIR)/api
CFLAGS += -I $(MBED_DIR)/rtos/rtos
CFLAGS += -I $(MBED_DIR)/rtos/rtx/TARGET_CORTEX_M
CFLAGS += -I $(MBED_DIR)/targets/cmsis
CFLAGS += -I $(MBED_DIR)/targets/cmsis/TARGET_STM/TARGET_STM32F4
CFLAGS += -I $(MBED_DIR)/targets/cmsis/TARGET_STM/TARGET_STM32F4/$(BOARD)
CFLAGS += -I $(MBED_DIR)/targets/hal/TARGET_STM/TARGET_STM32F4
CFLAGS += -I $(MBED_DIR)/targets/hal/TARGET_STM/TARGET_STM32F4/$(BOARD)
export CFLAGS

%.o : %.c
	$(CC) $(CFLAGS) -c -o $@ $<

%.o : %.S
	$(CC) $(CFLAGS) -c -o $@ $<

all: board-test cli-test libhal-test hsm

init:
	git submodule update --init --recursive --remote

$(MBED_DIR)/libstmf4.a:
	$(MAKE) -C $(MBED_DIR)

board-test: $(BOARD_OBJS) $(LIBS)
	$(MAKE) -C projects/board-test

cli-test: $(BOARD_OBJS) $(LIBS) $(LIBCLI_DIR)/libcli.a
	$(MAKE) -C projects/cli-test

$(RTOS_DIR)/librtos.a:
	$(MAKE) -C $(RTOS_DIR)

rtos-test: $(RTOS_OBJS) $(LIBS)
	$(MAKE) -C projects/rtos-test

$(LIBTFM_DIR)/libtfm.a:
	$(MAKE) -C $(LIBTFM_DIR) PREFIX=$(PREFIX)

$(LIBHAL_DIR)/libhal.a: $(LIBTFM_DIR)/libtfm.a
#	$(MAKE) -C $(LIBHAL_DIR) RPC_CLIENT=local IO_BUS=fmc KS=volatile libhal.a
	$(MAKE) -C $(LIBHAL_DIR) IO_BUS=fmc RPC_SERVER=yes RPC_TRANSPORT=serial KS=volatile libhal.a

$(LIBCLI_DIR)/libcli.a:
	$(MAKE) -C $(LIBCLI_DIR)

libhal-test: $(BOARD_OBJS) $(LIBS) $(LIBHAL_DIR)/libhal.a
	$(MAKE) -C projects/libhal-test

hsm: $(BOARD_OBJS) $(LIBS) $(LIBHAL_DIR)/libhal.a
	$(MAKE) -C projects/hsm

# don't automatically delete objects, to avoid a lot of unnecessary rebuilding
.SECONDARY: $(BOARD_OBJS)

.PHONY: board-test rtos-test libhal-test cli-test

clean:
	rm -f $(BOARD_OBJS)
	$(MAKE) -C projects/board-test clean
	$(MAKE) -C projects/cli-test clean
	$(MAKE) -C projects/rtos-test clean
	$(MAKE) -C projects/libhal-test clean
	$(MAKE) -C projects/hsm clean

distclean: clean
	$(MAKE) -C $(MBED_DIR) clean
	$(MAKE) -C $(RTOS_DIR) clean
	$(MAKE) -C $(LIBHAL_DIR) clean
	$(MAKE) -C $(LIBTFM_DIR) clean
ntation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /** @addtogroup CMSIS * @{ */ /** @addtogroup stm32f4xx_system * @{ */ /** @addtogroup STM32F4xx_System_Private_Includes * @{ */ #include "stm32f4xx.h" #include "hal_tick.h" #if !defined (HSE_VALUE) #define HSE_VALUE ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */ #endif /* HSE_VALUE */ #if !defined (HSI_VALUE) #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ #endif /* HSI_VALUE */ /** * @} */ /** @addtogroup STM32F4xx_System_Private_TypesDefinitions * @{ */ /** * @} */ /** @addtogroup STM32F4xx_System_Private_Defines * @{ */ /************************* Miscellaneous Configuration ************************/ /*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory */ #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)\ || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) /* #define DATA_IN_ExtSRAM */ #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) /* #define DATA_IN_ExtSDRAM */ #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ #if defined(DATA_IN_ExtSRAM) && defined(DATA_IN_ExtSDRAM) #error "Please select DATA_IN_ExtSRAM or DATA_IN_ExtSDRAM " #endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */ /*!< Uncomment the following line if you need to relocate your vector Table in Internal SRAM. */ /* #define VECT_TAB_SRAM */ #define VECT_TAB_OFFSET 0x00 /*!< Vector Table base offset field. This value must be a multiple of 0x200. */ /******************************************************************************/ /** * @} */ /** @addtogroup STM32F4xx_System_Private_Macros * @{ */ /** * @} */ /** @addtogroup STM32F4xx_System_Private_Variables * @{ */ /* This variable is updated in three ways: 1) by calling CMSIS function SystemCoreClockUpdate() 2) by calling HAL API function HAL_RCC_GetHCLKFreq() 3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency Note: If you use this function to configure the system clock; then there is no need to call the 2 first functions listed above, since SystemCoreClock variable is updated automatically. */ uint32_t SystemCoreClock = 16000000; const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9}; /** * @} */ /** @addtogroup STM32F4xx_System_Private_FunctionPrototypes * @{ */ #if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) static void SystemInit_ExtMemCtl(void); #endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ void SetSysClock(void); /** * @} */ /** @addtogroup STM32F4xx_System_Private_Functions * @{ */ /** * @brief Setup the microcontroller system * Initialize the FPU setting, vector table location and External memory * configuration. * @param None * @retval None */ void SystemInit(void) { /* FPU settings ------------------------------------------------------------*/ #if (__FPU_PRESENT == 1) && (__FPU_USED == 1) SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2)); /* set CP10 and CP11 Full Access */ #endif /* Reset the RCC clock configuration to the default reset state ------------*/ /* Set HSION bit */ RCC->CR |= (uint32_t)0x00000001; /* Reset CFGR register */ RCC->CFGR = 0x00000000; /* Reset HSEON, CSSON and PLLON bits */ RCC->CR &= (uint32_t)0xFEF6FFFF; /* Reset PLLCFGR register */ RCC->PLLCFGR = 0x24003010; /* Reset HSEBYP bit */ RCC->CR &= (uint32_t)0xFFFBFFFF; /* Disable all interrupts */ RCC->CIR = 0x00000000; #if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) SystemInit_ExtMemCtl(); #endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ /* Configure the Vector Table location add offset address ------------------*/ #ifdef VECT_TAB_SRAM SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */ #else SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */ #endif /* Configure the Cube driver */ SystemCoreClock = 16000000; // At this stage the HSI is used as system clock HAL_Init(); /* Configure the System clock source, PLL Multiplier and Divider factors, AHB/APBx prescalers and Flash settings */ SetSysClock(); SystemCoreClockUpdate(); /* Reset the timer to avoid issues after the RAM initialization */ TIM_MST_RESET_ON; TIM_MST_RESET_OFF; } /** * @brief Update SystemCoreClock variable according to Clock Register Values. * The SystemCoreClock variable contains the core clock (HCLK), it can * be used by the user application to setup the SysTick timer or configure * other parameters. * * @note Each time the core clock (HCLK) changes, this function must be called * to update SystemCoreClock variable value. Otherwise, any configuration * based on this variable will be incorrect. * * @note - The system frequency computed by this function is not the real * frequency in the chip. It is calculated based on the predefined * constant and the selected clock source: * * - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*) * * - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**) * * - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**) * or HSI_VALUE(*) multiplied/divided by the PLL factors. * * (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value * 16 MHz) but the real value may vary depending on the variations * in voltage and temperature. * * (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value * depends on the application requirements), user has to ensure that HSE_VALUE * is same as the real frequency of the crystal used. Otherwise, this function * may have wrong result. * * - The result of this function could be not correct when using fractional * value for HSE crystal. * * @param None * @retval None */ void SystemCoreClockUpdate(void) { uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2; /* Get SYSCLK source -------------------------------------------------------*/ tmp = RCC->CFGR & RCC_CFGR_SWS; switch (tmp) { case 0x00: /* HSI used as system clock source */ SystemCoreClock = HSI_VALUE; break; case 0x04: /* HSE used as system clock source */ SystemCoreClock = HSE_VALUE; break; case 0x08: /* PLL used as system clock source */ /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N SYSCLK = PLL_VCO / PLL_P */ pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22; pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM; if (pllsource != 0) { /* HSE used as PLL clock source */ pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); } else { /* HSI used as PLL clock source */ pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6); } pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2; SystemCoreClock = pllvco/pllp; break; default: SystemCoreClock = HSI_VALUE; break; } /* Compute HCLK frequency --------------------------------------------------*/ /* Get HCLK prescaler */ tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)]; /* HCLK frequency */ SystemCoreClock >>= tmp; } #if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM) /** * @brief Setup the external memory controller. * Called in startup_stm32f4xx.s before jump to main. * This function configures the external memories (SRAM/SDRAM) * This SRAM/SDRAM will be used as program data memory (including heap and stack). * @param None * @retval None */ void SystemInit_ExtMemCtl(void) { __IO uint32_t tmp = 0x00; #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) #if defined (DATA_IN_ExtSDRAM) register uint32_t tmpreg = 0, timeout = 0xFFFF; register uint32_t index; /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface clock */ RCC->AHB1ENR |= 0x000001F8; /* Delay after an RCC peripheral clock enabling */ tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN); /* Connect PDx pins to FMC Alternate function */ GPIOD->AFR[0] = 0x000000CC; GPIOD->AFR[1] = 0xCC000CCC; /* Configure PDx pins in Alternate function mode */ GPIOD->MODER = 0xA02A000A; /* Configure PDx pins speed to 50 MHz */ GPIOD->OSPEEDR = 0xA02A000A; /* Configure PDx pins Output type to push-pull */ GPIOD->OTYPER = 0x00000000; /* No pull-up, pull-down for PDx pins */ GPIOD->PUPDR = 0x00000000; /* Connect PEx pins to FMC Alternate function */ GPIOE->AFR[0] = 0xC00000CC; GPIOE->AFR[1] = 0xCCCCCCCC; /* Configure PEx pins in Alternate function mode */ GPIOE->MODER = 0xAAAA800A; /* Configure PEx pins speed to 50 MHz */ GPIOE->OSPEEDR = 0xAAAA800A; /* Configure PEx pins Output type to push-pull */ GPIOE->OTYPER = 0x00000000; /* No pull-up, pull-down for PEx pins */ GPIOE->PUPDR = 0x00000000; /* Connect PFx pins to FMC Alternate function */ GPIOF->AFR[0] = 0xCCCCCCCC; GPIOF->AFR[1] = 0xCCCCCCCC; /* Configure PFx pins in Alternate function mode */ GPIOF->MODER = 0xAA800AAA; /* Configure PFx pins speed to 50 MHz */ GPIOF->OSPEEDR = 0xAA800AAA; /* Configure PFx pins Output type to push-pull */ GPIOF->OTYPER = 0x00000000; /* No pull-up, pull-down for PFx pins */ GPIOF->PUPDR = 0x00000000; /* Connect PGx pins to FMC Alternate function */ GPIOG->AFR[0] = 0xCCCCCCCC; GPIOG->AFR[1] = 0xCCCCCCCC; /* Configure PGx pins in Alternate function mode */ GPIOG->MODER = 0xAAAAAAAA; /* Configure PGx pins speed to 50 MHz */ GPIOG->OSPEEDR = 0xAAAAAAAA; /* Configure PGx pins Output type to push-pull */ GPIOG->OTYPER = 0x00000000; /* No pull-up, pull-down for PGx pins */ GPIOG->PUPDR = 0x00000000; /* Connect PHx pins to FMC Alternate function */ GPIOH->AFR[0] = 0x00C0CC00; GPIOH->AFR[1] = 0xCCCCCCCC; /* Configure PHx pins in Alternate function mode */ GPIOH->MODER = 0xAAAA08A0; /* Configure PHx pins speed to 50 MHz */ GPIOH->OSPEEDR = 0xAAAA08A0; /* Configure PHx pins Output type to push-pull */ GPIOH->OTYPER = 0x00000000; /* No pull-up, pull-down for PHx pins */ GPIOH->PUPDR = 0x00000000; /* Connect PIx pins to FMC Alternate function */ GPIOI->AFR[0] = 0xCCCCCCCC; GPIOI->AFR[1] = 0x00000CC0; /* Configure PIx pins in Alternate function mode */ GPIOI->MODER = 0x0028AAAA; /* Configure PIx pins speed to 50 MHz */ GPIOI->OSPEEDR = 0x0028AAAA; /* Configure PIx pins Output type to push-pull */ GPIOI->OTYPER = 0x00000000; /* No pull-up, pull-down for PIx pins */ GPIOI->PUPDR = 0x00000000; /*-- FMC Configuration ------------------------------------------------------*/ /* Enable the FMC interface clock */ RCC->AHB3ENR |= 0x00000001; /* Delay after an RCC peripheral clock enabling */ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); /* Configure and enable SDRAM bank1 */ FMC_Bank5_6->SDCR[0] = 0x000019E4; FMC_Bank5_6->SDTR[0] = 0x01115351; /* SDRAM initialization sequence */ /* Clock enable command */ FMC_Bank5_6->SDCMR = 0x00000011; tmpreg = FMC_Bank5_6->SDSR & 0x00000020; while((tmpreg != 0) && (timeout-- > 0)) { tmpreg = FMC_Bank5_6->SDSR & 0x00000020; } /* Delay */ for (index = 0; index<1000; index++); /* PALL command */ FMC_Bank5_6->SDCMR = 0x00000012; timeout = 0xFFFF; while((tmpreg != 0) && (timeout-- > 0)) { tmpreg = FMC_Bank5_6->SDSR & 0x00000020; } /* Auto refresh command */ FMC_Bank5_6->SDCMR = 0x00000073; timeout = 0xFFFF; while((tmpreg != 0) && (timeout-- > 0)) { tmpreg = FMC_Bank5_6->SDSR & 0x00000020; } /* MRD register program */ FMC_Bank5_6->SDCMR = 0x00046014; timeout = 0xFFFF; while((tmpreg != 0) && (timeout-- > 0)) { tmpreg = FMC_Bank5_6->SDSR & 0x00000020; } /* Set refresh count */ tmpreg = FMC_Bank5_6->SDRTR; FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1)); /* Disable write protection */ tmpreg = FMC_Bank5_6->SDCR[0]; FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF); #endif /* DATA_IN_ExtSDRAM */ #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) #if defined(DATA_IN_ExtSRAM) /*-- GPIOs Configuration -----------------------------------------------------*/ /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */ RCC->AHB1ENR |= 0x00000078; /* Delay after an RCC peripheral clock enabling */ tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN); /* Connect PDx pins to FMC Alternate function */ GPIOD->AFR[0] = 0x00CCC0CC; GPIOD->AFR[1] = 0xCCCCCCCC; /* Configure PDx pins in Alternate function mode */ GPIOD->MODER = 0xAAAA0A8A; /* Configure PDx pins speed to 100 MHz */ GPIOD->OSPEEDR = 0xFFFF0FCF; /* Configure PDx pins Output type to push-pull */ GPIOD->OTYPER = 0x00000000; /* No pull-up, pull-down for PDx pins */ GPIOD->PUPDR = 0x00000000; /* Connect PEx pins to FMC Alternate function */ GPIOE->AFR[0] = 0xC00CC0CC; GPIOE->AFR[1] = 0xCCCCCCCC; /* Configure PEx pins in Alternate function mode */ GPIOE->MODER = 0xAAAA828A; /* Configure PEx pins speed to 100 MHz */ GPIOE->OSPEEDR = 0xFFFFC3CF; /* Configure PEx pins Output type to push-pull */ GPIOE->OTYPER = 0x00000000; /* No pull-up, pull-down for PEx pins */ GPIOE->PUPDR = 0x00000000; /* Connect PFx pins to FMC Alternate function */ GPIOF->AFR[0] = 0x00CCCCCC; GPIOF->AFR[1] = 0xCCCC0000; /* Configure PFx pins in Alternate function mode */ GPIOF->MODER = 0xAA000AAA; /* Configure PFx pins speed to 100 MHz */ GPIOF->OSPEEDR = 0xFF000FFF; /* Configure PFx pins Output type to push-pull */ GPIOF->OTYPER = 0x00000000; /* No pull-up, pull-down for PFx pins */ GPIOF->PUPDR = 0x00000000; /* Connect PGx pins to FMC Alternate function */ GPIOG->AFR[0] = 0x00CCCCCC; GPIOG->AFR[1] = 0x000000C0; /* Configure PGx pins in Alternate function mode */ GPIOG->MODER = 0x00085AAA; /* Configure PGx pins speed to 100 MHz */ GPIOG->OSPEEDR = 0x000CAFFF; /* Configure PGx pins Output type to push-pull */ GPIOG->OTYPER = 0x00000000; /* No pull-up, pull-down for PGx pins */ GPIOG->PUPDR = 0x00000000; /*-- FMC/FSMC Configuration --------------------------------------------------*/ /* Enable the FMC/FSMC interface clock */ RCC->AHB3ENR |= 0x00000001; #if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) /* Delay after an RCC peripheral clock enabling */ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN); /* Configure and enable Bank1_SRAM2 */ FMC_Bank1->BTCR[2] = 0x00001011; FMC_Bank1->BTCR[3] = 0x00000201; FMC_Bank1E->BWTR[2] = 0x0fffffff; #endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ #if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) /* Delay after an RCC peripheral clock enabling */ tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN); /* Configure and enable Bank1_SRAM2 */ FSMC_Bank1->BTCR[2] = 0x00001011; FSMC_Bank1->BTCR[3] = 0x00000201; FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF; #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ #endif /* DATA_IN_ExtSRAM */ #endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ (void)(tmp); } #endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */ /** System Clock Configuration * * HSE crystal at 25 MHz, end result is 180 MHz clock. */ void SetSysClock(void) { RCC_OscInitTypeDef RCC_OscInitStruct; RCC_ClkInitTypeDef RCC_ClkInitStruct; __PWR_CLK_ENABLE(); __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1); RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; RCC_OscInitStruct.HSEState = RCC_HSE_ON; RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON; RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE; RCC_OscInitStruct.PLL.PLLM = 25; RCC_OscInitStruct.PLL.PLLN = 360; RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2; RCC_OscInitStruct.PLL.PLLQ = 4; HAL_RCC_OscConfig(&RCC_OscInitStruct); HAL_PWREx_ActivateOverDrive(); RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_SYSCLK|RCC_CLOCKTYPE_PCLK1 |RCC_CLOCKTYPE_PCLK2; RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK; RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1; RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4; RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2; HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5); } /** * @brief This function is executed in case of error occurrence. * @param None * @retval None */ void mbed_die(void) { #ifdef HAL_GPIO_MODULE_ENABLED //HAL_GPIO_WritePin(LED_PORT, LED_RED, GPIO_PIN_SET); HAL_GPIO_WritePin(GPIOJ, GPIO_PIN_1, GPIO_PIN_SET); #endif while (1) { ; } } #ifdef USE_FULL_ASSERT /** * @brief Reports the name of the source file and the source line number * where the assert_param error has occurred. * @param file: pointer to the source file name * @param line: assert_param error line source number * @retval None */ void assert_failed(uint8_t* file, uint32_t line) { /* USER CODE BEGIN 6 */ /* User can add his own implementation to report the file name and line number, ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */ /* USER CODE END 6 */ } #endif /** * @} */ /** * @} */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/