aboutsummaryrefslogtreecommitdiff
path: root/projects
AgeCommit message (Collapse)Author
2016-07-12merge from projects/hsmFredrik Thulin
2016-07-12Merge branch 'master' of git.cryptech.is.:sw/stm32Fredrik Thulin
2016-07-12restore original SCLK_DIVFredrik Thulin
2016-07-12re-enable masterkeyFredrik Thulin
2016-07-12Restore 'keystore set|rename|delete' commands; access key by index as well ↵Paul Selkirk
as name.
2016-07-09Clean up the CLI.Fredrik Thulin
A lot of the commands were just useful when testing/implementing features for the Alpha. Remove them now that they have been merged to projects/cli-test.
2016-07-09Integrate test code for MKMIF.Fredrik Thulin
There seems to be a timing issue (?) with the MKMIF. If SCLK_DIV is set to a higher value (was: 0x20) then the CLI command "test mkmif" will fail with only occasional success runs. With divisor 0x01, it works most of the time but not allways.
2016-07-09Merge more code from projects/hsm.Fredrik Thulin
2016-07-09Merge branch 'master' of git.cryptech.is.:sw/stm32Fredrik Thulin
2016-07-08Add upload from firmware tarball, gussie up command parser, add dire warnings.Rob Austein
Command parser now enforces little things like mutually-exclusive required options so we warn users who attempt something silly. Preferred source for uploads is now the firmware tarball installed along with the client software; we still support uploading from an explictly-specified source file, but one must now say "-i file". Updating the bootloader is dangerous, we now say so and also require an additional option before we'll even attempt it. For the record, while testing this I did manage to brick my Alpha and had to use an ST-LINK to recover, exactly as predicted by the new dire warning.
2016-07-08merge test code from projects/hsm/Fredrik Thulin
2016-07-07Merge branch 'master' of https://git.cryptech.is/sw/stm32.git.Rob Austein
2016-07-07Add cryptech_miniterm; tweak cryptech_probe to write environment variables ↵Rob Austein
like ssh-agent.
2016-07-07Drop bad request packets.Paul Selkirk
Also, if the UART receive callback fails to re-enable receive (because dispatch_thread is in the middle of transmitting a response), signal dispatch_thread to re-enable receive after it's done.
2016-07-07Default to one RPC worker thread.Paul Selkirk
2016-07-07Rewrite and add cleanup sequences to avoid confusing the RPC server.Rob Austein
2016-07-06Add uart_set_default() to make debugging output easier.Paul Selkirk
2016-07-06Cleanup - remove demo filetransfer command.Paul Selkirk
2016-07-06Add 'show fpga status' and 'show fpga cores'.Paul Selkirk
2016-07-06Small improvements to try to suck less.Paul Selkirk
2016-07-05Add horrible kludge of a script to probe USB ports and report whichRob Austein
ones look like console and RPC ports for the HSM.
2016-06-30RPC wire format now includes client handle in all requests, and opcode andPaul Selkirk
client handle in all responses.
2016-06-29add commands to clear pin or whole keystoreFredrik Thulin
2016-06-29cleanupFredrik Thulin
2016-06-28Only SO and wheel are allowed to upload.Paul Selkirk
Also add bootloader upload.
2016-06-28Fix the bootloader to accept firmware (with PIN login).Paul Selkirk
This involves entirely too much duplication of the CLI.
2016-06-27Remove old default user.Paul Selkirk
2016-06-27Modify cli-test/filetransfer to prompt for PIN.Paul Selkirk
2016-06-26PIN-based loginPaul Selkirk
2016-06-25Merge branch 'alternate_dma'Paul Selkirk
2016-06-25Split LIB*_DIR into _SRC and _BLD.Paul Selkirk
Also rename all instances of GNUmakefile to Makefile.
2016-06-25Finish unwinding subrepository hairball: VPATH setup.Rob Austein
2016-06-24Masterkey functions now return hal_error_t as suggested by Rob.Fredrik Thulin
2016-06-23Add masterkey and keystore commands.Fredrik Thulin
2016-06-16keystore_erase_sectors takes start and stop arguments nowFredrik Thulin
2016-06-16Merge branch 'master' into ft-ks_flashFredrik Thulin
2016-06-15Use a 1-byte DMA buffer for management UART receives.Paul Selkirk
It sounds silly, but this gives us completion callbacks, so we don't spend out entire time slice polling the receive buffer for new characters (which kills performance for tasks that are doing real work). Besides, libcli wants to process a character at a time, so uart_cli_read just waits on the completion callback.
2016-06-14Import cli-test into hsm pretty much as-is.Paul Selkirk
2016-06-13RSA keygen needs even more stack space than I thought.Paul Selkirk
Also, it turns out the linker wants to include initializers for sdram variables in the .elf and .bin files, even though it should handle it like bss. So now we manage sdram directly with a pseudo-malloc.
2016-06-13Only the HSM project needs the RTOS; most of the test projects can use the ↵Paul Selkirk
STM32 HAL code directly.
2016-06-09Put thread stack buffers in SDRAM, because pkey uses a lot of stack.Paul Selkirk
Also rearchitect the way we handle RPC requests - have a bunch of waiting dispatch threads rather than continually creating and deleting threads.
2016-06-09Rename main.c to hsm.c for consistency and a slightly simpler Makefile.Paul Selkirk
2016-06-09Put all the keystore commands under 'keystore' instead.Fredrik Thulin
Makes more sense to keep them together, at least in the cli-test.
2016-06-09updated test-code for keystore functionalityFredrik Thulin
2016-06-08Include strings.h, for strcasecmp().Rob Austein
2016-06-08Test code for ks_flash in corresponding branch of libhal.Fredrik Thulin
2016-06-08bootloader doesn't need stm-fmc eitherFredrik Thulin
2016-06-07Don't reboot when CLI logout is intended.Paul Selkirk
2016-06-07Check the HARDWARE_EARLY_DFU_JUMP flag as soon as possible in the boot process.Paul Selkirk
This avoids the situation where the bootloader systick happens during firmware initialization, and freaks out. Also build the bootloader with the minimum resources needed (no RTOS, no SPI, no I2C).
2016-06-06Use refactored slip/serial code.Paul Selkirk
Client daemon sends client ID, echo it back in response.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 02:20:16 +0000