sw/stm32 - Cryptech HSM on STM-32 ARM processor

Age	Commit message (Collapse)	Author
2016-07-10	Check jumpers JP7 and JP8 before accepting new firmware or bootloader images.	Paul Selkirk
	Unfortunately, we can't read the jumper GPIOs directly, as that just gives us the last values written to them, so we see if we can read the FPGA configuration memory.
2016-07-07	Merge branch 'master' of https://git.cryptech.is/sw/stm32.git.	Rob Austein

2016-07-07	Add cryptech_miniterm; tweak cryptech_probe to write environment variables ↵	Rob Austein
	like ssh-agent.
2016-07-07	Drop bad request packets.	Paul Selkirk
	Also, if the UART receive callback fails to re-enable receive (because dispatch_thread is in the middle of transmitting a response), signal dispatch_thread to re-enable receive after it's done.
2016-07-07	Default to one RPC worker thread.	Paul Selkirk

2016-07-07	Rewrite and add cleanup sequences to avoid confusing the RPC server.	Rob Austein

2016-07-06	Add uart_set_default() to make debugging output easier.	Paul Selkirk

2016-07-06	Cleanup - remove demo filetransfer command.	Paul Selkirk

2016-07-06	Add 'show fpga status' and 'show fpga cores'.	Paul Selkirk

2016-07-06	Small improvements to try to suck less.	Paul Selkirk

2016-07-05	Add horrible kludge of a script to probe USB ports and report which	Rob Austein
	ones look like console and RPC ports for the HSM.
2016-06-30	RPC wire format now includes client handle in all requests, and opcode and	Paul Selkirk
	client handle in all responses.
2016-06-29	add commands to clear pin or whole keystore	Fredrik Thulin

2016-06-29	cleanup	Fredrik Thulin

2016-06-28	Only SO and wheel are allowed to upload.	Paul Selkirk
	Also add bootloader upload.
2016-06-28	Fix the bootloader to accept firmware (with PIN login).	Paul Selkirk
	This involves entirely too much duplication of the CLI.
2016-06-27	Remove old default user.	Paul Selkirk

2016-06-27	Modify cli-test/filetransfer to prompt for PIN.	Paul Selkirk

2016-06-26	PIN-based login	Paul Selkirk

2016-06-25	Merge branch 'alternate_dma'	Paul Selkirk

2016-06-25	Split LIB*_DIR into _SRC and _BLD.	Paul Selkirk
	Also rename all instances of GNUmakefile to Makefile.
2016-06-25	Finish unwinding subrepository hairball: VPATH setup.	Rob Austein

2016-06-24	Masterkey functions now return hal_error_t as suggested by Rob.	Fredrik Thulin

2016-06-23	Add masterkey and keystore commands.	Fredrik Thulin

2016-06-16	keystore_erase_sectors takes start and stop arguments now	Fredrik Thulin

2016-06-16	Merge branch 'master' into ft-ks_flash	Fredrik Thulin

2016-06-15	Use a 1-byte DMA buffer for management UART receives.	Paul Selkirk
	It sounds silly, but this gives us completion callbacks, so we don't spend out entire time slice polling the receive buffer for new characters (which kills performance for tasks that are doing real work). Besides, libcli wants to process a character at a time, so uart_cli_read just waits on the completion callback.
2016-06-14	Import cli-test into hsm pretty much as-is.	Paul Selkirk

2016-06-13	RSA keygen needs even more stack space than I thought.	Paul Selkirk
	Also, it turns out the linker wants to include initializers for sdram variables in the .elf and .bin files, even though it should handle it like bss. So now we manage sdram directly with a pseudo-malloc.
2016-06-13	Only the HSM project needs the RTOS; most of the test projects can use the ↵	Paul Selkirk
	STM32 HAL code directly.
2016-06-09	Put thread stack buffers in SDRAM, because pkey uses a lot of stack.	Paul Selkirk
	Also rearchitect the way we handle RPC requests - have a bunch of waiting dispatch threads rather than continually creating and deleting threads.
2016-06-09	Rename main.c to hsm.c for consistency and a slightly simpler Makefile.	Paul Selkirk

2016-06-09	Put all the keystore commands under 'keystore' instead.	Fredrik Thulin
	Makes more sense to keep them together, at least in the cli-test.
2016-06-09	updated test-code for keystore functionality	Fredrik Thulin

2016-06-08	Include strings.h, for strcasecmp().	Rob Austein

2016-06-08	Test code for ks_flash in corresponding branch of libhal.	Fredrik Thulin

2016-06-08	bootloader doesn't need stm-fmc either	Fredrik Thulin

2016-06-07	Don't reboot when CLI logout is intended.	Paul Selkirk

2016-06-07	Check the HARDWARE_EARLY_DFU_JUMP flag as soon as possible in the boot process.	Paul Selkirk
	This avoids the situation where the bootloader systick happens during firmware initialization, and freaks out. Also build the bootloader with the minimum resources needed (no RTOS, no SPI, no I2C).
2016-06-06	Use refactored slip/serial code.	Paul Selkirk
	Client daemon sends client ID, echo it back in response.
2016-06-06	Remove the 6-second blue blink for alpha board.	Paul Selkirk

2016-06-06	Remove unused hex file.	Paul Selkirk

2016-06-06	Remove unused projects.	Paul Selkirk

2016-06-02	Merge branch 'ft-uart_it'	Fredrik Thulin

2016-06-02	Use DMA for UART RX instead of interrupts.	Fredrik Thulin
	DMA is more efficient and less prone to miss characters than interrupts. An open question is if circular mode is really the best. If someone copy-pastes more than the RX buffer size of configuration into the CLI, we risk the DMA controller catching up with the reader and overwriting data not yet read. Since we don't have flow control back to the users terminal, we will always fail if too much data is entered before we can process it. The question is if failing to stuff new data at the end of a buffer might be better than data being overwritten - thus messing up the commands in unpredictable ways.
2016-06-02	Move the rest of the CLI commands out of cli-test.c.	Fredrik Thulin

2016-06-01	Implement circular buffer UART RX using interrupts.	Fredrik Thulin

2016-06-01	Move FPGA related commands to mgmt-fpga.c	Fredrik Thulin

2016-06-01	Wait for FPGA_DONE on startup (available on Alpha board)	Fredrik Thulin

2016-05-31	Update huart names to reflect change in stm-uart.	Fredrik Thulin