| Age | Commit message (Collapse) | Author | |
|---|---|---|---|
| 2016-09-27 | "keystore erase" now clears entire keystore flash. | Rob Austein | |
| Now that we're using more than just the first few sectors of the keystore flash, we need a command to clear the whole thing. This is not quite right yet, because it doesn't yet notify libhal's ks_flash driver that the entire content of the flash has been yanked out from under it. In theory, we should be able to erase the entire flash in a single operation using the bulk erase command command (0xC7), but I couldn't get that to do anything (no error reported, no visible effect), so, for now, we erase by sectors. | |||
| 2016-09-23 | Use subsectors instead of sectors in keystore. | Rob Austein | |
| 2016-09-16 | Revised ks_flash. Compiles, not yet tested. | Rob Austein | |
| 2016-09-13 | Track libhal cleanup (function names, const-ification). | Rob Austein | |
| 2016-09-09 | Track removal of `type` argument from hal_rpc_pkey_find(). | Rob Austein | |
| 2016-09-02 | Whack with club until working with new keystore API. | Rob Austein | |
| Basic stuff like "keystore show keys", "keystore delete key", and the PIN commands all work with the new keystore code. Some of the management commands are still broken. Some of the old management commands were using libhal-internal APIs for which no real equivalent exists anymore. Some of the old management commands were doing things that, um, never could have worked as written. | |||
| 2016-08-23 | Merge branch 'master' of git.cryptech.is:sw/stm32 | Paul Selkirk | |
| 2016-08-23 | Show running threads. | Paul Selkirk | |
| 2016-08-23 | Reset table of cores after resetting FPGA from CLI. | Paul Selkirk | |
| 2016-08-23 | Multi-client testing revealed race conditions in uart receive code | Paul Selkirk | |
| (dropped characters, improper handoff of message buffers). Fixed by a) changing the uart receiver from interrupt to DMA mode, and b) replacing the dispatch mutex and rpc semaphore with a mail queue (memory pool + message queue). | |||
| 2016-08-15 | Incorporate FPGA comms test from projects/board-test/fmc-test.c | Fredrik Thulin | |
| 2016-08-15 | cli_receive_data: re-enable UART DMA before returning | Fredrik Thulin | |
| Bugfix after new port of libcli where this enabling doesn't happen after every command anymore. | |||
| 2016-08-11 | Multiple threads and multiple cores, to deal with multiple clients. | Paul Selkirk | |
| 2016-08-11 | re-implement 'show fpga cores' | Fredrik Thulin | |
| 2016-07-21 | Use a fresh port of libcli, which retains more of the original API. | Paul Selkirk | |
| 2016-07-16 | Don't run empty "export" command. | Rob Austein | |
| 2016-07-13 | 'masterkey set' without args sets master key to a random value | Paul Selkirk | |
| 2016-07-13 | probe_cores() finally does the right thing, so we don't have to call it early. | Paul Selkirk | |
| 2016-07-12 | Make username a command-line option, default "so" as it used to be. | Rob Austein | |
| 2016-07-12 | Allow wheel to upload firmware/bitstreams | Paul Selkirk | |
| 2016-07-12 | Re-disable 'keystore set key'; hexdump binary key names; remove unused ↵ | Paul Selkirk | |
| 'show' commands. | |||
| 2016-07-12 | merge from projects/hsm | Fredrik Thulin | |
| 2016-07-12 | Merge branch 'master' of git.cryptech.is.:sw/stm32 | Fredrik Thulin | |
| 2016-07-12 | restore original SCLK_DIV | Fredrik Thulin | |
| 2016-07-12 | re-enable masterkey | Fredrik Thulin | |
| 2016-07-12 | Restore 'keystore set|rename|delete' commands; access key by index as well ↵ | Paul Selkirk | |
| as name. | |||
| 2016-07-09 | Clean up the CLI. | Fredrik Thulin | |
| A lot of the commands were just useful when testing/implementing features for the Alpha. Remove them now that they have been merged to projects/cli-test. | |||
| 2016-07-09 | Integrate test code for MKMIF. | Fredrik Thulin | |
| There seems to be a timing issue (?) with the MKMIF. If SCLK_DIV is set to a higher value (was: 0x20) then the CLI command "test mkmif" will fail with only occasional success runs. With divisor 0x01, it works most of the time but not allways. | |||
| 2016-07-09 | Merge more code from projects/hsm. | Fredrik Thulin | |
| 2016-07-09 | Merge branch 'master' of git.cryptech.is.:sw/stm32 | Fredrik Thulin | |
| 2016-07-08 | Add upload from firmware tarball, gussie up command parser, add dire warnings. | Rob Austein | |
| Command parser now enforces little things like mutually-exclusive required options so we warn users who attempt something silly. Preferred source for uploads is now the firmware tarball installed along with the client software; we still support uploading from an explictly-specified source file, but one must now say "-i file". Updating the bootloader is dangerous, we now say so and also require an additional option before we'll even attempt it. For the record, while testing this I did manage to brick my Alpha and had to use an ST-LINK to recover, exactly as predicted by the new dire warning. | |||
| 2016-07-08 | merge test code from projects/hsm/ | Fredrik Thulin | |
| 2016-07-07 | Merge branch 'master' of https://git.cryptech.is/sw/stm32.git. | Rob Austein | |
| 2016-07-07 | Add cryptech_miniterm; tweak cryptech_probe to write environment variables ↵ | Rob Austein | |
| like ssh-agent. | |||
| 2016-07-07 | Drop bad request packets. | Paul Selkirk | |
| Also, if the UART receive callback fails to re-enable receive (because dispatch_thread is in the middle of transmitting a response), signal dispatch_thread to re-enable receive after it's done. | |||
| 2016-07-07 | Default to one RPC worker thread. | Paul Selkirk | |
| 2016-07-07 | Rewrite and add cleanup sequences to avoid confusing the RPC server. | Rob Austein | |
| 2016-07-06 | Add uart_set_default() to make debugging output easier. | Paul Selkirk | |
| 2016-07-06 | Cleanup - remove demo filetransfer command. | Paul Selkirk | |
| 2016-07-06 | Add 'show fpga status' and 'show fpga cores'. | Paul Selkirk | |
| 2016-07-06 | Small improvements to try to suck less. | Paul Selkirk | |
| 2016-07-05 | Add horrible kludge of a script to probe USB ports and report which | Rob Austein | |
| ones look like console and RPC ports for the HSM. | |||
| 2016-06-30 | RPC wire format now includes client handle in all requests, and opcode and | Paul Selkirk | |
| client handle in all responses. | |||
| 2016-06-29 | add commands to clear pin or whole keystore | Fredrik Thulin | |
| 2016-06-29 | cleanup | Fredrik Thulin | |
| 2016-06-28 | Only SO and wheel are allowed to upload. | Paul Selkirk | |
| Also add bootloader upload. | |||
| 2016-06-28 | Fix the bootloader to accept firmware (with PIN login). | Paul Selkirk | |
| This involves entirely too much duplication of the CLI. | |||
| 2016-06-27 | Remove old default user. | Paul Selkirk | |
| 2016-06-27 | Modify cli-test/filetransfer to prompt for PIN. | Paul Selkirk | |
| 2016-06-26 | PIN-based login | Paul Selkirk | |
 |
index : sw/stm32 | |
| Cryptech HSM on STM-32 ARM processor | git repositories |
| aboutsummaryrefslogtreecommitdiff |