sw/stm32 - Cryptech HSM on STM-32 ARM processor

Age	Commit message (Collapse)	Author
2016-09-09	Track removal of `type` argument from hal_rpc_pkey_find().	Rob Austein

2016-09-02	Whack with club until working with new keystore API.	Rob Austein
	Basic stuff like "keystore show keys", "keystore delete key", and the PIN commands all work with the new keystore code. Some of the management commands are still broken. Some of the old management commands were using libhal-internal APIs for which no real equivalent exists anymore. Some of the old management commands were doing things that, um, never could have worked as written.
2016-08-23	Merge branch 'master' of git.cryptech.is:sw/stm32	Paul Selkirk

2016-08-23	Show running threads.	Paul Selkirk

2016-08-23	Reset table of cores after resetting FPGA from CLI.	Paul Selkirk

2016-08-23	Multi-client testing revealed race conditions in uart receive code	Paul Selkirk
	(dropped characters, improper handoff of message buffers). Fixed by a) changing the uart receiver from interrupt to DMA mode, and b) replacing the dispatch mutex and rpc semaphore with a mail queue (memory pool + message queue).
2016-08-15	Incorporate FPGA comms test from projects/board-test/fmc-test.c	Fredrik Thulin

2016-08-15	cli_receive_data: re-enable UART DMA before returning	Fredrik Thulin
	Bugfix after new port of libcli where this enabling doesn't happen after every command anymore.
2016-08-11	Multiple threads and multiple cores, to deal with multiple clients.	Paul Selkirk

2016-08-11	re-implement 'show fpga cores'	Fredrik Thulin

2016-07-21	Use a fresh port of libcli, which retains more of the original API.	Paul Selkirk

2016-07-16	Don't run empty "export" command.	Rob Austein

2016-07-13	'masterkey set' without args sets master key to a random value	Paul Selkirk

2016-07-13	probe_cores() finally does the right thing, so we don't have to call it early.	Paul Selkirk

2016-07-12	Make username a command-line option, default "so" as it used to be.	Rob Austein

2016-07-12	Allow wheel to upload firmware/bitstreams	Paul Selkirk

2016-07-12	Re-disable 'keystore set key'; hexdump binary key names; remove unused ↵	Paul Selkirk
	'show' commands.
2016-07-12	merge from projects/hsm	Fredrik Thulin

2016-07-12	Merge branch 'master' of git.cryptech.is.:sw/stm32	Fredrik Thulin

2016-07-12	restore original SCLK_DIV	Fredrik Thulin

2016-07-12	re-enable masterkey	Fredrik Thulin

2016-07-12	Restore 'keystore set\|rename\|delete' commands; access key by index as well ↵	Paul Selkirk
	as name.
2016-07-09	Clean up the CLI.	Fredrik Thulin
	A lot of the commands were just useful when testing/implementing features for the Alpha. Remove them now that they have been merged to projects/cli-test.
2016-07-09	Integrate test code for MKMIF.	Fredrik Thulin
	There seems to be a timing issue (?) with the MKMIF. If SCLK_DIV is set to a higher value (was: 0x20) then the CLI command "test mkmif" will fail with only occasional success runs. With divisor 0x01, it works most of the time but not allways.
2016-07-09	Merge more code from projects/hsm.	Fredrik Thulin

2016-07-09	Merge branch 'master' of git.cryptech.is.:sw/stm32	Fredrik Thulin

2016-07-08	Add upload from firmware tarball, gussie up command parser, add dire warnings.	Rob Austein
	Command parser now enforces little things like mutually-exclusive required options so we warn users who attempt something silly. Preferred source for uploads is now the firmware tarball installed along with the client software; we still support uploading from an explictly-specified source file, but one must now say "-i file". Updating the bootloader is dangerous, we now say so and also require an additional option before we'll even attempt it. For the record, while testing this I did manage to brick my Alpha and had to use an ST-LINK to recover, exactly as predicted by the new dire warning.
2016-07-08	merge test code from projects/hsm/	Fredrik Thulin

2016-07-07	Merge branch 'master' of https://git.cryptech.is/sw/stm32.git.	Rob Austein

2016-07-07	Add cryptech_miniterm; tweak cryptech_probe to write environment variables ↵	Rob Austein
	like ssh-agent.
2016-07-07	Drop bad request packets.	Paul Selkirk
	Also, if the UART receive callback fails to re-enable receive (because dispatch_thread is in the middle of transmitting a response), signal dispatch_thread to re-enable receive after it's done.
2016-07-07	Default to one RPC worker thread.	Paul Selkirk

2016-07-07	Rewrite and add cleanup sequences to avoid confusing the RPC server.	Rob Austein

2016-07-06	Add uart_set_default() to make debugging output easier.	Paul Selkirk

2016-07-06	Cleanup - remove demo filetransfer command.	Paul Selkirk

2016-07-06	Add 'show fpga status' and 'show fpga cores'.	Paul Selkirk

2016-07-06	Small improvements to try to suck less.	Paul Selkirk

2016-07-05	Add horrible kludge of a script to probe USB ports and report which	Rob Austein
	ones look like console and RPC ports for the HSM.
2016-06-30	RPC wire format now includes client handle in all requests, and opcode and	Paul Selkirk
	client handle in all responses.
2016-06-29	add commands to clear pin or whole keystore	Fredrik Thulin

2016-06-29	cleanup	Fredrik Thulin

2016-06-28	Only SO and wheel are allowed to upload.	Paul Selkirk
	Also add bootloader upload.
2016-06-28	Fix the bootloader to accept firmware (with PIN login).	Paul Selkirk
	This involves entirely too much duplication of the CLI.
2016-06-27	Remove old default user.	Paul Selkirk

2016-06-27	Modify cli-test/filetransfer to prompt for PIN.	Paul Selkirk

2016-06-26	PIN-based login	Paul Selkirk

2016-06-25	Merge branch 'alternate_dma'	Paul Selkirk

2016-06-25	Split LIB*_DIR into _SRC and _BLD.	Paul Selkirk
	Also rename all instances of GNUmakefile to Makefile.
2016-06-25	Finish unwinding subrepository hairball: VPATH setup.	Rob Austein

2016-06-24	Masterkey functions now return hal_error_t as suggested by Rob.	Fredrik Thulin