aboutsummaryrefslogtreecommitdiff
path: root/projects
AgeCommit message (Collapse)Author
2017-02-23Add --pin and --quiet options.Paul Selkirk
2017-02-23Speed up file upload enormously.Paul Selkirk
We need to start with a long serial timeout, in order to catch the reboot messages for a firmware upload (this has to be done through the bootloader). But once we start sending the file, cut the serial timeout to 1ms. (I've tested it down to 1us, but that may not work for everyone, and it doesn't improve performance in a statistically significant way.) This brings the time to upload a 4.5MB bitstream from 38:23 to 1:25.
2017-02-22Refactor flash code.Paul Selkirk
2017-02-21Use libcli return codes where appropriate; show whether PINs are set.Paul Selkirk
2017-02-21Use bulk erase in the one place it makes sense.Paul Selkirk
2017-02-19Remove unnecessary delays in flash code.Paul Selkirk
2017-02-19Simplify spiflash test code slightly, add keystore test code.Paul Selkirk
2017-02-15Add performance tests for spiflash_n25q128.cPaul Selkirk
2017-02-02Add locking around keystore operations.Rob Austein
2016-12-23Don't wrap key number in "keystore show keys".Rob Austein
2016-12-21Initialize PINs before trying to use them in bootloader.Rob Austein
2016-12-21Rewrite core upload loop to simplify and fix race conditions.Rob Austein
The main loop in cryptech_upload:send_file() was much more complicated than necessary, and also contained some hidden assumptions about serial I/O timing which happened to fail on the first two machines I tested. We already had a perfectly good buffered-input function, so rewrote to use that, and simplified control structure in the process. In theory, the new code should work in any environment where the old one did, but this has not yet been confirmed.
2016-12-20Flush output to serial device after writing.Rob Austein
2016-12-20Merge branch 'master' into ksngRob Austein
Bootloader DFU fixes.
2016-12-20The bootloader upgrade reboots now, so we don't need to log out of the CLI.Paul Selkirk
2016-12-20Fix bootloader upload callback routine to write the correct number of bytes ↵Paul Selkirk
to flash. While we're at it, propagate error returns.
2016-12-20cli_receive_data: re-enable UART DMA before returning. Based on Fredrik's ↵Paul Selkirk
fix to cli-test, commit ae8ebce.
2016-12-19Merge branch 'master' into ksng.Rob Austein
Drag in UART-related changes from master.
2016-11-25Add debugging code to cryptech_upload.Rob Austein
2016-11-15Reinitialize keystore data structures after wiping keystore flash.Rob Austein
2016-11-14Track removal of hal_rpc_pkey_list().Rob Austein
2016-11-14hal_rpc_pkey_find() -> hal_rpc_pkey_open().Rob Austein
2016-11-01Tweak CLI keystore commands for latest libhal RPC keystore API.Rob Austein
Using {-1} as a client handle in the CLI is a kludge, but the new stricter libhal keystore code really wants us to be consistent about this, so as long as any part of the CLI is using client {-1}, it all needs to do so. This still isn't really right, the CLI probably needs a different set of access rules than those which apply to the RPC calls, but I'm deferring that until we know what the "final" (for this branch) version of the RPC API looks like, and have done whatever refactoring might be required in the libhal keystore drivers.
2016-10-09Track changes to libhal pkey API.Rob Austein
2016-10-07Track changes to libhal RPC pkey API.Rob Austein
2016-10-07strcasecmp() is not a standard function.Rob Austein
2016-09-27"keystore erase" now clears entire keystore flash.Rob Austein
Now that we're using more than just the first few sectors of the keystore flash, we need a command to clear the whole thing. This is not quite right yet, because it doesn't yet notify libhal's ks_flash driver that the entire content of the flash has been yanked out from under it. In theory, we should be able to erase the entire flash in a single operation using the bulk erase command command (0xC7), but I couldn't get that to do anything (no error reported, no visible effect), so, for now, we erase by sectors.
2016-09-23Use subsectors instead of sectors in keystore.Rob Austein
2016-09-20Still some problem with uart receive under heavy load, so change to a 2-byte ↵Paul Selkirk
receive buffer with half-complete callbacks, and raise the dma priority.
2016-09-16Revised ks_flash. Compiles, not yet tested.Rob Austein
2016-09-13Track libhal cleanup (function names, const-ification).Rob Austein
2016-09-09Track removal of `type` argument from hal_rpc_pkey_find().Rob Austein
2016-09-05add bit-for-bit testing of FMC address and data busFredrik Thulin
2016-09-02Whack with club until working with new keystore API.Rob Austein
Basic stuff like "keystore show keys", "keystore delete key", and the PIN commands all work with the new keystore code. Some of the management commands are still broken. Some of the old management commands were using libhal-internal APIs for which no real equivalent exists anymore. Some of the old management commands were doing things that, um, never could have worked as written.
2016-08-23Merge branch 'master' of git.cryptech.is:sw/stm32Paul Selkirk
2016-08-23Show running threads.Paul Selkirk
2016-08-23Reset table of cores after resetting FPGA from CLI.Paul Selkirk
2016-08-23Multi-client testing revealed race conditions in uart receive codePaul Selkirk
(dropped characters, improper handoff of message buffers). Fixed by a) changing the uart receiver from interrupt to DMA mode, and b) replacing the dispatch mutex and rpc semaphore with a mail queue (memory pool + message queue).
2016-08-15Incorporate FPGA comms test from projects/board-test/fmc-test.cFredrik Thulin
2016-08-15cli_receive_data: re-enable UART DMA before returningFredrik Thulin
Bugfix after new port of libcli where this enabling doesn't happen after every command anymore.
2016-08-11Multiple threads and multiple cores, to deal with multiple clients.Paul Selkirk
2016-08-11re-implement 'show fpga cores'Fredrik Thulin
2016-07-21Use a fresh port of libcli, which retains more of the original API.Paul Selkirk
2016-07-16Don't run empty "export" command.Rob Austein
2016-07-13'masterkey set' without args sets master key to a random valuePaul Selkirk
2016-07-13probe_cores() finally does the right thing, so we don't have to call it early.Paul Selkirk
2016-07-12Make username a command-line option, default "so" as it used to be.Rob Austein
2016-07-12Allow wheel to upload firmware/bitstreamsPaul Selkirk
2016-07-12Re-disable 'keystore set key'; hexdump binary key names; remove unused ↵Paul Selkirk
'show' commands.
2016-07-12merge from projects/hsmFredrik Thulin