sw/stm32 - Cryptech HSM on STM-32 ARM processor

Age	Commit message (Collapse)	Author
2018-09-11	Cleanup, move 'keywrap core' command to the hsm project, where it will ↵	Paul Selkirk
	actually be useful for short-term testing.
2018-08-17	Add sanity test for arbitrary size keys, to be really sure the keywrap core ↵	Paul Selkirk
	bank-switched memory works.
2018-08-16	Add timing tests for key unwrap.	Paul Selkirk

2018-08-15	Add support for Joachim's keywrap core.	Paul Selkirk

2018-07-25	Merge branch 'hashsig'	Paul Selkirk

2018-07-24	Add dummy hal_free_static_memory to cli-test, to avoid a link error.	Paul Selkirk
	We really ought to rototill cli-test, but not today.
2018-05-27	FMC cleanup: constification, gratuitous pointer.	Rob Austein

2017-12-14	Revert a clean up 'fix' which actually broke FPGA upload.	Paul Selkirk

2017-10-17	Overhaul UART API	Paul Selkirk
	MGMT is the default UART, and no one should have to explicitly refer to the UART unless they need USER (hsm.c:hal_serial_send_char). The default UART is now exposed in the header file, so that the default-using functions can be macros, which saves a few bytes in code space, and a few microseconds in function call overhead.
2017-10-15	Cleanup: All drivers return HAL_StatusTypeDef rather than magic values.	Paul Selkirk
	Note: This affects libhal/ks_token.c, which uses the keystore driver directly.
2017-10-11	Cleanup 'unused parameter' warnings, a couple of which are actual coding errors.	Paul Selkirk

2017-10-11	Cleanup: signed/unsigned mismatches, mostly in loop counters	Paul Selkirk

2017-05-28	Track API changes in libhal ks9 branch.	Rob Austein

2017-05-02	Merge branch 'init_cleanup' into no-rtos	Paul Selkirk
	Clean up Makefiles and initialization code.
2017-05-01	Addendum to commit e0e97a5: Remove all references to the tasker from cli-test.	Paul Selkirk

2017-04-30	Merge branch 'ksng' into no-rtos	Rob Austein
	Required minor manual intervention to resolve merge issues git had no way of understanding: git is clever, but not quite clever enough to understand that a commit in branch had removed the entire RTOS that a commit in the other branch was using. No big deal, just a couple of osDelay() calls needing conversion to HAL_Delay() or task_delay().
2017-04-29	cli-test doesn't use the tasker, even though it might have previously used a ↵	Paul Selkirk
	semaphore from the rtos
2017-04-29	Port cli-test to the new task API.	Paul Selkirk

2017-04-26	Add support for hal_sleep().	Rob Austein

2017-04-16	Switch to libhal's CRC-32 code.	Rob Austein

2017-04-11	Track API changes on sw/libhal pkcs8 branch.	Rob Austein

2017-02-22	Refactor flash code.	Paul Selkirk

2016-12-19	Merge branch 'master' into ksng.	Rob Austein
	Drag in UART-related changes from master.
2016-11-15	Reinitialize keystore data structures after wiping keystore flash.	Rob Austein

2016-11-14	Track removal of hal_rpc_pkey_list().	Rob Austein

2016-11-14	hal_rpc_pkey_find() -> hal_rpc_pkey_open().	Rob Austein

2016-10-09	Track changes to libhal pkey API.	Rob Austein

2016-10-07	Track changes to libhal RPC pkey API.	Rob Austein

2016-10-07	strcasecmp() is not a standard function.	Rob Austein

2016-09-27	"keystore erase" now clears entire keystore flash.	Rob Austein
	Now that we're using more than just the first few sectors of the keystore flash, we need a command to clear the whole thing. This is not quite right yet, because it doesn't yet notify libhal's ks_flash driver that the entire content of the flash has been yanked out from under it. In theory, we should be able to erase the entire flash in a single operation using the bulk erase command command (0xC7), but I couldn't get that to do anything (no error reported, no visible effect), so, for now, we erase by sectors.
2016-09-23	Use subsectors instead of sectors in keystore.	Rob Austein

2016-09-16	Revised ks_flash. Compiles, not yet tested.	Rob Austein

2016-09-13	Track libhal cleanup (function names, const-ification).	Rob Austein

2016-09-09	Track removal of `type` argument from hal_rpc_pkey_find().	Rob Austein

2016-09-05	add bit-for-bit testing of FMC address and data bus	Fredrik Thulin

2016-09-02	Whack with club until working with new keystore API.	Rob Austein
	Basic stuff like "keystore show keys", "keystore delete key", and the PIN commands all work with the new keystore code. Some of the management commands are still broken. Some of the old management commands were using libhal-internal APIs for which no real equivalent exists anymore. Some of the old management commands were doing things that, um, never could have worked as written.
2016-08-15	Incorporate FPGA comms test from projects/board-test/fmc-test.c	Fredrik Thulin

2016-08-15	cli_receive_data: re-enable UART DMA before returning	Fredrik Thulin
	Bugfix after new port of libcli where this enabling doesn't happen after every command anymore.
2016-08-11	re-implement 'show fpga cores'	Fredrik Thulin

2016-07-21	Use a fresh port of libcli, which retains more of the original API.	Paul Selkirk

2016-07-12	merge from projects/hsm	Fredrik Thulin

2016-07-12	restore original SCLK_DIV	Fredrik Thulin

2016-07-12	re-enable masterkey	Fredrik Thulin

2016-07-09	Integrate test code for MKMIF.	Fredrik Thulin
	There seems to be a timing issue (?) with the MKMIF. If SCLK_DIV is set to a higher value (was: 0x20) then the CLI command "test mkmif" will fail with only occasional success runs. With divisor 0x01, it works most of the time but not allways.
2016-07-09	Merge more code from projects/hsm.	Fredrik Thulin

2016-07-08	merge test code from projects/hsm/	Fredrik Thulin

2016-06-25	Split LIB*_DIR into _SRC and _BLD.	Paul Selkirk
	Also rename all instances of GNUmakefile to Makefile.
2016-06-16	Merge branch 'master' into ft-ks_flash	Fredrik Thulin

2016-06-13	Only the HSM project needs the RTOS; most of the test projects can use the ↵	Paul Selkirk
	STM32 HAL code directly.
2016-06-09	Put all the keystore commands under 'keystore' instead.	Fredrik Thulin
	Makes more sense to keep them together, at least in the cli-test.