aboutsummaryrefslogtreecommitdiff
path: root/projects/cli-test
AgeCommit message (Collapse)Author
2016-10-07Track changes to libhal RPC pkey API.Rob Austein
2016-10-07strcasecmp() is not a standard function.Rob Austein
2016-09-27"keystore erase" now clears entire keystore flash.Rob Austein
Now that we're using more than just the first few sectors of the keystore flash, we need a command to clear the whole thing. This is not quite right yet, because it doesn't yet notify libhal's ks_flash driver that the entire content of the flash has been yanked out from under it. In theory, we should be able to erase the entire flash in a single operation using the bulk erase command command (0xC7), but I couldn't get that to do anything (no error reported, no visible effect), so, for now, we erase by sectors.
2016-09-23Use subsectors instead of sectors in keystore.Rob Austein
2016-09-16Revised ks_flash. Compiles, not yet tested.Rob Austein
2016-09-13Track libhal cleanup (function names, const-ification).Rob Austein
2016-09-09Track removal of `type` argument from hal_rpc_pkey_find().Rob Austein
2016-09-02Whack with club until working with new keystore API.Rob Austein
Basic stuff like "keystore show keys", "keystore delete key", and the PIN commands all work with the new keystore code. Some of the management commands are still broken. Some of the old management commands were using libhal-internal APIs for which no real equivalent exists anymore. Some of the old management commands were doing things that, um, never could have worked as written.
2016-08-15Incorporate FPGA comms test from projects/board-test/fmc-test.cFredrik Thulin
2016-08-15cli_receive_data: re-enable UART DMA before returningFredrik Thulin
Bugfix after new port of libcli where this enabling doesn't happen after every command anymore.
2016-08-11re-implement 'show fpga cores'Fredrik Thulin
2016-07-21Use a fresh port of libcli, which retains more of the original API.Paul Selkirk
2016-07-12merge from projects/hsmFredrik Thulin
2016-07-12restore original SCLK_DIVFredrik Thulin
2016-07-12re-enable masterkeyFredrik Thulin
2016-07-09Integrate test code for MKMIF.Fredrik Thulin
There seems to be a timing issue (?) with the MKMIF. If SCLK_DIV is set to a higher value (was: 0x20) then the CLI command "test mkmif" will fail with only occasional success runs. With divisor 0x01, it works most of the time but not allways.
2016-07-09Merge more code from projects/hsm.Fredrik Thulin
2016-07-08merge test code from projects/hsm/Fredrik Thulin
2016-06-25Split LIB*_DIR into _SRC and _BLD.Paul Selkirk
Also rename all instances of GNUmakefile to Makefile.
2016-06-16Merge branch 'master' into ft-ks_flashFredrik Thulin
2016-06-13Only the HSM project needs the RTOS; most of the test projects can use the ↵Paul Selkirk
STM32 HAL code directly.
2016-06-09Put all the keystore commands under 'keystore' instead.Fredrik Thulin
Makes more sense to keep them together, at least in the cli-test.
2016-06-09updated test-code for keystore functionalityFredrik Thulin
2016-06-08Include strings.h, for strcasecmp().Rob Austein
2016-06-08Test code for ks_flash in corresponding branch of libhal.Fredrik Thulin
2016-06-07Don't reboot when CLI logout is intended.Paul Selkirk
2016-06-02Use DMA for UART RX instead of interrupts.Fredrik Thulin
DMA is more efficient and less prone to miss characters than interrupts. An open question is if circular mode is really the best. If someone copy-pastes more than the RX buffer size of configuration into the CLI, we risk the DMA controller catching up with the reader and overwriting data not yet read. Since we don't have flow control back to the users terminal, we will always fail if too much data is entered before we can process it. The question is if failing to stuff new data at the end of a buffer might be better than data being overwritten - thus messing up the commands in unpredictable ways.
2016-06-02Move the rest of the CLI commands out of cli-test.c.Fredrik Thulin
2016-06-01Implement circular buffer UART RX using interrupts.Fredrik Thulin
2016-06-01Move FPGA related commands to mgmt-fpga.cFredrik Thulin
2016-05-27DFU working - but no signature validation for now.Fredrik Thulin
2016-05-27cli_command_root_node: bugfix missing command callbackFredrik Thulin
2016-05-26Implement a bootloader.Fredrik Thulin
This bootloader is now the application at 0x08000000 (FLASH start), which the STM32 will execute upon reset. The other applications are now loaded at 0x08030000 (128 KB into the flash) and will never get started unless the bootloader has been programmed into flash too.
2016-05-25More DFU code. This might actually work.Fredrik Thulin
The applications to be uploaded using 'dfu upload' have to have another FLASH defined in their linker script. Have to recompile some firmware tomorrow and test if this actually works.
2016-05-24non-working code to upload an application and jump to itFredrik Thulin
Committing my work in progress in case someone else wants to help.
2016-05-24make 'test sdram' take number of iterations as argumentFredrik Thulin
2016-05-23SDRAM initialization and test code from Pavel.Fredrik Thulin
Integrated into the cli-test program as such: cryptech> test sdram Initializing SDRAM Starting SDRAM test (n = 0) Run sequential write-then-read test for the first chip Run random write-then-read test for the first chip Run sequential write-then-read test for the second chip Run random write-then-read test for the second chip Run interleaved write-then-read test for both chips at once SDRAM test (n = 0) completed SDRAM test completed successfully cryptech>
2016-05-21Add code to test reading, writing and erasing keystore data.Fredrik Thulin
2016-05-21Add code to access the keystore memory (SPI flash).Fredrik Thulin
2016-05-21Add some exciting defines to define commans in the CLI.Fredrik Thulin
Hopefully, having this excitement now makes adding commands a little bit less exciting from here on.
2016-05-20Add code to reset FPGA using FPGA_PROGRAM_B and FPGA_INIT_B.Fredrik Thulin
Also add code to erase FPGA config memory and check status of FPGA_DONE.
2016-05-19Refactor FPGA bitstream upload code.Fredrik Thulin
Move the N25Q128 code to it's own file in order to be able to reuse it for the keystore memory code.
2016-05-18Add FPGA bitstream upload command to cli-test.Fredrik Thulin
This code needs more error checking etc. but together with the Python script 'filetransfer', a new bitstream may be loaded into the FPGA config memory like this: filetransfer --fpga /path/to/bitstream The bitstream is identified by 'file' e.g. like this: alpha_test_top.bit: Xilinx BIT data - from alpha_test_top.ncd;UserID=0xFFFFFFFF - for 7a200tfbg484 - built 2016/05/12(13:59:24) - data length 0xe0164
2016-05-18A little more robust file transferFredrik Thulin
2016-05-18put some generic CLI code in mgmt-cli.cFredrik Thulin
2016-05-18Add reboot command.Fredrik Thulin
2016-05-18Write in 4k-chunks, with acks for flow control.Fredrik Thulin
2016-05-18build libcliPaul Selkirk
2016-05-16Use baud rate 921600 instead of 115200.Fredrik Thulin
Don't want to wait longer than necessary for firmware file transfers.
2016-05-15add simple filetransfer pocFredrik Thulin