sw/stm32 - Cryptech HSM on STM-32 ARM processor

Age	Commit message (Collapse)	Author
2017-05-28	Track API changes in libhal ks9 branch.	Rob Austein

2017-05-02	Merge branch 'init_cleanup' into no-rtos	Paul Selkirk
	Clean up Makefiles and initialization code.
2017-05-01	Addendum to commit e0e97a5: Remove all references to the tasker from cli-test.	Paul Selkirk

2017-04-30	Merge branch 'ksng' into no-rtos	Rob Austein
	Required minor manual intervention to resolve merge issues git had no way of understanding: git is clever, but not quite clever enough to understand that a commit in branch had removed the entire RTOS that a commit in the other branch was using. No big deal, just a couple of osDelay() calls needing conversion to HAL_Delay() or task_delay().
2017-04-29	cli-test doesn't use the tasker, even though it might have previously used a ↵	Paul Selkirk
	semaphore from the rtos
2017-04-29	Port cli-test to the new task API.	Paul Selkirk

2017-04-26	Add support for hal_sleep().	Rob Austein

2017-04-16	Switch to libhal's CRC-32 code.	Rob Austein

2017-04-11	Track API changes on sw/libhal pkcs8 branch.	Rob Austein

2017-02-22	Refactor flash code.	Paul Selkirk

2016-12-19	Merge branch 'master' into ksng.	Rob Austein
	Drag in UART-related changes from master.
2016-11-15	Reinitialize keystore data structures after wiping keystore flash.	Rob Austein

2016-11-14	Track removal of hal_rpc_pkey_list().	Rob Austein

2016-11-14	hal_rpc_pkey_find() -> hal_rpc_pkey_open().	Rob Austein

2016-10-09	Track changes to libhal pkey API.	Rob Austein

2016-10-07	Track changes to libhal RPC pkey API.	Rob Austein

2016-10-07	strcasecmp() is not a standard function.	Rob Austein

2016-09-27	"keystore erase" now clears entire keystore flash.	Rob Austein
	Now that we're using more than just the first few sectors of the keystore flash, we need a command to clear the whole thing. This is not quite right yet, because it doesn't yet notify libhal's ks_flash driver that the entire content of the flash has been yanked out from under it. In theory, we should be able to erase the entire flash in a single operation using the bulk erase command command (0xC7), but I couldn't get that to do anything (no error reported, no visible effect), so, for now, we erase by sectors.
2016-09-23	Use subsectors instead of sectors in keystore.	Rob Austein

2016-09-16	Revised ks_flash. Compiles, not yet tested.	Rob Austein

2016-09-13	Track libhal cleanup (function names, const-ification).	Rob Austein

2016-09-09	Track removal of `type` argument from hal_rpc_pkey_find().	Rob Austein

2016-09-05	add bit-for-bit testing of FMC address and data bus	Fredrik Thulin

2016-09-02	Whack with club until working with new keystore API.	Rob Austein
	Basic stuff like "keystore show keys", "keystore delete key", and the PIN commands all work with the new keystore code. Some of the management commands are still broken. Some of the old management commands were using libhal-internal APIs for which no real equivalent exists anymore. Some of the old management commands were doing things that, um, never could have worked as written.
2016-08-15	Incorporate FPGA comms test from projects/board-test/fmc-test.c	Fredrik Thulin

2016-08-15	cli_receive_data: re-enable UART DMA before returning	Fredrik Thulin
	Bugfix after new port of libcli where this enabling doesn't happen after every command anymore.
2016-08-11	re-implement 'show fpga cores'	Fredrik Thulin

2016-07-21	Use a fresh port of libcli, which retains more of the original API.	Paul Selkirk

2016-07-12	merge from projects/hsm	Fredrik Thulin

2016-07-12	restore original SCLK_DIV	Fredrik Thulin

2016-07-12	re-enable masterkey	Fredrik Thulin

2016-07-09	Integrate test code for MKMIF.	Fredrik Thulin
	There seems to be a timing issue (?) with the MKMIF. If SCLK_DIV is set to a higher value (was: 0x20) then the CLI command "test mkmif" will fail with only occasional success runs. With divisor 0x01, it works most of the time but not allways.
2016-07-09	Merge more code from projects/hsm.	Fredrik Thulin

2016-07-08	merge test code from projects/hsm/	Fredrik Thulin

2016-06-25	Split LIB*_DIR into _SRC and _BLD.	Paul Selkirk
	Also rename all instances of GNUmakefile to Makefile.
2016-06-16	Merge branch 'master' into ft-ks_flash	Fredrik Thulin

2016-06-13	Only the HSM project needs the RTOS; most of the test projects can use the ↵	Paul Selkirk
	STM32 HAL code directly.
2016-06-09	Put all the keystore commands under 'keystore' instead.	Fredrik Thulin
	Makes more sense to keep them together, at least in the cli-test.
2016-06-09	updated test-code for keystore functionality	Fredrik Thulin

2016-06-08	Include strings.h, for strcasecmp().	Rob Austein

2016-06-08	Test code for ks_flash in corresponding branch of libhal.	Fredrik Thulin

2016-06-07	Don't reboot when CLI logout is intended.	Paul Selkirk

2016-06-02	Use DMA for UART RX instead of interrupts.	Fredrik Thulin
	DMA is more efficient and less prone to miss characters than interrupts. An open question is if circular mode is really the best. If someone copy-pastes more than the RX buffer size of configuration into the CLI, we risk the DMA controller catching up with the reader and overwriting data not yet read. Since we don't have flow control back to the users terminal, we will always fail if too much data is entered before we can process it. The question is if failing to stuff new data at the end of a buffer might be better than data being overwritten - thus messing up the commands in unpredictable ways.
2016-06-02	Move the rest of the CLI commands out of cli-test.c.	Fredrik Thulin

2016-06-01	Implement circular buffer UART RX using interrupts.	Fredrik Thulin

2016-06-01	Move FPGA related commands to mgmt-fpga.c	Fredrik Thulin

2016-05-27	DFU working - but no signature validation for now.	Fredrik Thulin

2016-05-27	cli_command_root_node: bugfix missing command callback	Fredrik Thulin

2016-05-26	Implement a bootloader.	Fredrik Thulin
	This bootloader is now the application at 0x08000000 (FLASH start), which the STM32 will execute upon reset. The other applications are now loaded at 0x08030000 (128 KB into the flash) and will never get started unless the bootloader has been programmed into flash too.
2016-05-25	More DFU code. This might actually work.	Fredrik Thulin
	The applications to be uploaded using 'dfu upload' have to have another FLASH defined in their linker script. Have to recompile some firmware tomorrow and test if this actually works.