| Age | Commit message (Collapse) | Author |
|---|
|
|
|
MGMT is the default UART, and no one should have to explicitly refer to
the UART unless they need USER (hsm.c:hal_serial_send_char).
The default UART is now exposed in the header file, so that the
default-using functions can be macros, which saves a few bytes in code
space, and a few microseconds in function call overhead.
|
|
This is a quick fix, so that we can get on with testing the ks9 branch
changes.
A better fix in the long run might be to add a third keystore
("ks_pin_read_only", or some such) which implemented the bare minimum
interface that the bootloader needs and left everything else
unimplemented. This would require a bit of refactoring the current
PIN code to make it work right with both the bootloader's abbreivated
keystore and the normal token keystore. Probably worth doing, but a
bit of a can of worms, so postponing for now.
|
|
Clean up Makefiles and initialization code.
|
|
|
|
This involves entirely too much duplication of the CLI.
|
|
This avoids the situation where the bootloader systick happens during
firmware initialization, and freaks out.
Also build the bootloader with the minimum resources needed (no RTOS, no
SPI, no I2C).
|
|
|
|
This bootloader is now the application at 0x08000000 (FLASH start),
which the STM32 will execute upon reset.
The other applications are now loaded at 0x08030000 (128 KB into the
flash) and will never get started unless the bootloader has been
programmed into flash too.
|
