sw/stm32 - Cryptech HSM on STM-32 ARM processor

Age	Commit message (Collapse)	Author
2017-09-07	Duh, actually build task_metrics	Paul Selkirk

2017-09-07	Sigh, right offset for the wrong register. Get the PC (the address we	Paul Selkirk
	interrupted) rather than LR (the return address from the function we interrupted). Also, change u_short and u_int to unsigned short and unsigned int, since gcc recently decided that those aren't part of the C99 standard. Finally, add profilable versions of memcpy, memset, and friends, because they get called a lot in the course of unit testing, and it would be nice to know who's calling them.
2017-09-07	Port profiling code, using a new SysTick hook and new CLI commands.	Paul Selkirk

2017-06-17	Fix optimization settings in HSM's build of libtfm.	Rob Austein

2017-05-02	Merge branch 'init_cleanup' into no-rtos	Paul Selkirk
	Clean up Makefiles and initialization code.
2017-04-27	Replace the RTOS with a simple cooperative tasker.	Paul Selkirk
	There are no priorities and no preemption, so tasks run in a round-robin fashion, and explicitly yield control.
2017-04-15	sw/stm32 Makefiles are a mess.	Rob Austein
	Apparently it's easier to duplicate source files into multiple project directories than to write Makefiles that do something sane. Feh.
2017-04-15	Move hal_log() support to separate module.	Rob Austein

2017-02-02	Add locking around keystore operations.	Rob Austein

2016-09-16	Change default gcc optimization level to -Og.	Rob Austein

2016-09-09	Fix frelling sw/stm32/Makefile to rebuild libraries properly.	Rob Austein

2016-07-21	Use a fresh port of libcli, which retains more of the original API.	Paul Selkirk

2016-06-28	Fix the bootloader to accept firmware (with PIN login).	Paul Selkirk
	This involves entirely too much duplication of the CLI.
2016-06-25	Split LIB*_DIR into _SRC and _BLD.	Paul Selkirk
	Also rename all instances of GNUmakefile to Makefile.
2016-06-25	Finish unwinding subrepository hairball: VPATH setup.	Rob Austein

2016-06-24	Don't mess with HAL_RSA_USE_MODEXP here, that's libhal's job.	Rob Austein

2016-06-16	Merge branch 'master' into ft-ks_flash	Fredrik Thulin

2016-06-14	hsm project was failing with obscure make error because makefile did not ↵	Rob Austein
	specify dependency on libcli.
2016-06-14	Track libhal RPC_MODE simplification; add bootloader to "all" target.	Rob Austein

2016-06-13	Only the HSM project needs the RTOS; most of the test projects can use the ↵	Paul Selkirk
	STM32 HAL code directly.
2016-06-08	Test code for ks_flash in corresponding branch of libhal.	Fredrik Thulin

2016-06-07	Check the HARDWARE_EARLY_DFU_JUMP flag as soon as possible in the boot process.	Paul Selkirk
	This avoids the situation where the bootloader systick happens during firmware initialization, and freaks out. Also build the bootloader with the minimum resources needed (no RTOS, no SPI, no I2C).
2016-06-06	Don't break builds for dev-bridge board.	Paul Selkirk

2016-06-01	Implement circular buffer UART RX using interrupts.	Fredrik Thulin

2016-05-27	DFU working - but no signature validation for now.	Fredrik Thulin

2016-05-26	Implement a bootloader.	Fredrik Thulin
	This bootloader is now the application at 0x08000000 (FLASH start), which the STM32 will execute upon reset. The other applications are now loaded at 0x08030000 (128 KB into the flash) and will never get started unless the bootloader has been programmed into flash too.
2016-05-24	Try harder to pick up updates from our submodules.	Paul Selkirk

2016-05-24	Merge branch 'master' of git.cryptech.is:sw/stm32	Paul Selkirk

2016-05-24	Remove duplicate cli-test target	Paul Selkirk

2016-05-23	SDRAM initialization and test code from Pavel.	Fredrik Thulin
	Integrated into the cli-test program as such: cryptech> test sdram Initializing SDRAM Starting SDRAM test (n = 0) Run sequential write-then-read test for the first chip Run random write-then-read test for the first chip Run sequential write-then-read test for the second chip Run random write-then-read test for the second chip Run interleaved write-then-read test for both chips at once SDRAM test (n = 0) completed SDRAM test completed successfully cryptech>
2016-05-21	Add code to access the keystore memory (SPI flash).	Fredrik Thulin

2016-05-19	Refactor FPGA bitstream upload code.	Fredrik Thulin
	Move the N25Q128 code to it's own file in order to be able to reuse it for the keystore memory code.
2016-05-18	FPGA config memory access code from Pavel.	Fredrik Thulin

2016-05-18	build libcli	Paul Selkirk

2016-05-16	Add code to talk with the external RTC chip.	Fredrik Thulin

2016-05-13	make cli-test	Fredrik Thulin

2016-05-12	Add build target for the alpha	Fredrik Thulin

2016-04-21	threaded rpc server	Paul Selkirk

2016-04-14	import mbed rtos library	Paul Selkirk

2016-04-11	Reorganize Makefile and directory structure, because it's messy, and it's ↵	Paul Selkirk
	about to get messier.
2016-03-21	making RPC tests	Paul Selkirk

2016-03-16	Added uart_recv_char() to support RPC.	Paul Selkirk
	Moved hal_io_fmc.c to libhal repo.
2015-12-13	whack copyrights	Paul Selkirk

2015-11-16	add test-trng, test-rsa	Paul Selkirk

2015-11-11	Lots of cleanup.	Paul Selkirk
	Clean up and simplify(?) Makefile. Add copyrights as needed. Add include guard to stm-fmc.h. Move MX_USART2_UART_Init back to stm-init.c for possible copyright reasons. Move libc, src, and include files to top level.
2015-11-10	Split includes from CFLAGS, because they don't make sense to libhal and libtfm.	Paul Selkirk

2015-10-31	add new test cases, add gettimeofday	Paul Selkirk

2015-10-29	add libhal tests, some cleanup (some mess-making)	Paul Selkirk

2015-10-26	Build libhal and libtfm for stm32.	Paul Selkirk

2015-10-26	Based on user/ft/stm32-dev-bridge, without the project-specific build	Paul Selkirk
	directories (and duplicated code).