sw/stm32 - Cryptech HSM on STM-32 ARM processor

Age	Commit message (Collapse)	Author
2017-09-07	Add task_yield_maybe	Paul Selkirk

2017-09-07	Duh, actually build task_metrics	Paul Selkirk

2017-09-07	Sigh, right offset for the wrong register. Get the PC (the address we	Paul Selkirk
	interrupted) rather than LR (the return address from the function we interrupted). Also, change u_short and u_int to unsigned short and unsigned int, since gcc recently decided that those aren't part of the C99 standard. Finally, add profilable versions of memcpy, memset, and friends, because they get called a lot in the course of unit testing, and it would be nice to know who's calling them.
2017-09-07	Correct offset to get the PC.	Paul Selkirk
	A previous version of this code ran over the RTOS, where threads used the Process Stack, while the SysTick interrupt used the Main Stack. Now everything's on the main stack, so we need to account for 2 extra words that SysTick_Handler pushes on the stack at entry.
2017-09-07	Port profiling code, using a new SysTick hook and new CLI commands.	Paul Selkirk

2017-09-07	Copy profiling code from MCUOnEclipse.	Paul Selkirk

2017-09-07	Add some task metrics.	Paul Selkirk

2017-08-31	Cleanup	Paul Selkirk

2017-08-31	Withdraw SysTick_hook (commit 9ffead1), because it turns out there was ↵	Paul Selkirk
	already a user-callback mechanism with HAL_SYSTICK_IRQHandler() and HAL_SYSTICK_Callback().
2017-07-31	Report UART receive queue length, so we can tune it.	Paul Selkirk

2017-07-31	Adapt uart_rx_thread to the post-thread tasking model, because we're still	Paul Selkirk
	subject to the same forces that made it a good idea in the first place. commit 2b6b9f8 Change RPC UART to have a high-priority thread monitoring a large(ish) DMA buffer, because we've observed out-of-order receives under load.
2017-07-31	Add a generic SysTick hook, to call a function on every 1ms tick, because ↵	Paul Selkirk
	it's easier than setting up a dedicated timer.
2017-06-17	Fix optimization settings in HSM's build of libtfm.	Rob Austein

2017-05-28	Stub out hal_allocate_static_memory() to avoid linker error.	Rob Austein
	This is a quick fix, so that we can get on with testing the ks9 branch changes. A better fix in the long run might be to add a third keystore ("ks_pin_read_only", or some such) which implemented the bare minimum interface that the bootloader needs and left everything else unimplemented. This would require a bit of refactoring the current PIN code to make it work right with both the bootloader's abbreivated keystore and the normal token keystore. Probably worth doing, but a bit of a can of worms, so postponing for now.
2017-05-28	Track API changes in libhal ks9 branch.	Rob Austein

2017-05-24	Add task_yield_maybe	Paul Selkirk

2017-05-24	Duh, actually build task_metrics	Paul Selkirk

2017-05-13	Merge branch 'task_metrics' into profiling	Paul Selkirk

2017-05-10	Sigh, right offset for the wrong register. Get the PC (the address we	Paul Selkirk
	interrupted) rather than LR (the return address from the function we interrupted). Also, change u_short and u_int to unsigned short and unsigned int, since gcc recently decided that those aren't part of the C99 standard. Finally, add profilable versions of memcpy, memset, and friends, because they get called a lot in the course of unit testing, and it would be nice to know who's calling them.
2017-05-06	Correct offset to get the PC.	Paul Selkirk
	A previous version of this code ran over the RTOS, where threads used the Process Stack, while the SysTick interrupt used the Main Stack. Now everything's on the main stack, so we need to account for 2 extra words that SysTick_Handler pushes on the stack at entry.
2017-05-05	Port profiling code, using a new SysTick hook and new CLI commands.	Paul Selkirk

2017-05-04	Copy profiling code from MCUOnEclipse.	Paul Selkirk

2017-05-03	Add some task metrics.	Paul Selkirk

2017-05-02	Merge branch 'init_cleanup' into no-rtos	Paul Selkirk
	Clean up Makefiles and initialization code.
2017-05-01	Remove bogus counting-loop version of HAL_Delay.	Paul Selkirk

2017-05-01	Add HAL_Delay as an alias for task_delay, but don't wedge if the tasker ↵	Paul Selkirk
	isn't running yet.
2017-05-01	Addendum to commit e0e97a5: Remove all references to the tasker from cli-test.	Paul Selkirk

2017-04-30	Need stdint.h if we're going to use uint32_t.	Rob Austein

2017-04-30	Merge branch 'ksng' into no-rtos	Rob Austein
	Required minor manual intervention to resolve merge issues git had no way of understanding: git is clever, but not quite clever enough to understand that a commit in branch had removed the entire RTOS that a commit in the other branch was using. No big deal, just a couple of osDelay() calls needing conversion to HAL_Delay() or task_delay().
2017-04-29	Add minimal mutexes to the minimal tasking system	Paul Selkirk

2017-04-29	cli-test doesn't use the tasker, even though it might have previously used a ↵	Paul Selkirk
	semaphore from the rtos
2017-04-29	Add task_delay.	Paul Selkirk

2017-04-29	Simplify hsm makefile.	Paul Selkirk

2017-04-29	Port cli-test to the new task API.	Paul Selkirk

2017-04-29	Remove exception handlders that I probably shouldn't have defined in the ↵	Paul Selkirk
	first place.
2017-04-29	Remove rtos source files.	Paul Selkirk

2017-04-27	Replace the RTOS with a simple cooperative tasker.	Paul Selkirk
	There are no priorities and no preemption, so tasks run in a round-robin fashion, and explicitly yield control.
2017-04-27	Refactor cryptech_upload to work either directly or via cryptech_muxd.	Rob Austein

2017-04-26	Add support for hal_sleep().	Rob Austein

2017-04-17	Rewrite the wait-for-ready loop in uart_send_bytes() to actually work.	Paul Selkirk

2017-04-17	Add a short delay to osMailAlloc, since we're no longer calling it in an ISR.	Paul Selkirk

2017-04-17	Use default SysTick interrupt priority.	Paul Selkirk
	We really don't want SysTick_Handler, which runs the task scheduler, to run at a higher priority than SVC_Handler, which runs supposedly-atomic operations like mutex locking and unlocking. I've seen a mutex lock/unlock mismatch which I think is due to interrupting rt_mut_release at a particularly inopportune moment.
2017-04-17	Merge remote-tracking branch 'origin/uart_rx_thread' into ksng	Paul Selkirk

2017-04-16	Switch to libhal's CRC-32 code.	Rob Austein

2017-04-15	Missing include files, doh.	Rob Austein

2017-04-15	sw/stm32 Makefiles are a mess.	Rob Austein
	Apparently it's easier to duplicate source files into multiple project directories than to write Makefiles that do something sane. Feh.
2017-04-15	Move hal_log() support to separate module.	Rob Austein

2017-04-15	Logging implementation for Alpha hardware.	Rob Austein

2017-04-12	Handle race condition while fetching key metadata for display.	Rob Austein
	Fetching a list of keys and all of their metadata isn't an atomic process, nor, probably, should it be, so we need to cope with things like a key being deleted via the RPC interface while we're fetching its metadata for display on the console interface.
2017-04-11	Track API changes on sw/libhal pkcs8 branch.	Rob Austein