sw/stm32 - Cryptech HSM on STM-32 ARM processor

Age	Commit message (Collapse)	Author
2016-07-10	Sign/verifiy installable imagesparade_of_half_baked_ideas	Paul Selkirk
	Receive the image into sdram, verify the signature before copying to flash. It would be great if worked...
2016-07-10	Try to restrict wheel user to only setting pins.	Paul Selkirk
	This is a bit of social engineering, because at the moment he can easily drop out of config mode to get the full command set. It also doesn't restrict his use of RPC.
2016-07-10	Check jumpers JP7 and JP8 before accepting new firmware or bootloader images.	Paul Selkirk
	Unfortunately, we can't read the jumper GPIOs directly, as that just gives us the last values written to them, so we see if we can read the FPGA configuration memory.
2016-07-07	Merge branch 'master' of https://git.cryptech.is/sw/stm32.git.	Rob Austein

2016-07-07	Add cryptech_miniterm; tweak cryptech_probe to write environment variables ↵	Rob Austein
	like ssh-agent.
2016-07-07	Drop bad request packets.	Paul Selkirk
	Also, if the UART receive callback fails to re-enable receive (because dispatch_thread is in the middle of transmitting a response), signal dispatch_thread to re-enable receive after it's done.
2016-07-07	Default to one RPC worker thread.	Paul Selkirk

2016-07-07	Rewrite and add cleanup sequences to avoid confusing the RPC server.	Rob Austein

2016-07-06	Amend 833802c: Add reentrancy protection to fmc_write_32.	Paul Selkirk

2016-07-06	Add uart_set_default() to make debugging output easier.	Paul Selkirk

2016-07-06	Cleanup - remove demo filetransfer command.	Paul Selkirk

2016-07-06	Add 'show fpga status' and 'show fpga cores'.	Paul Selkirk

2016-07-06	Small improvements to try to suck less.	Paul Selkirk

2016-07-06	Fix the way code is commented out, to avoid compiler warnings.	Paul Selkirk

2016-07-06	Simplify library Makefiles by using symbols defined in top-level Makefile, ↵	Paul Selkirk
	rather than re-deriving them.
2016-07-06	Add reentrancy protection to fmc_read_32.	Paul Selkirk

2016-07-05	Add horrible kludge of a script to probe USB ports and report which	Rob Austein
	ones look like console and RPC ports for the HSM.
2016-06-30	RPC wire format now includes client handle in all requests, and opcode and	Paul Selkirk
	client handle in all responses.
2016-06-29	add commands to clear pin or whole keystore	Fredrik Thulin

2016-06-29	keystore_erase_sectors: bugfix	Fredrik Thulin

2016-06-29	cleanup	Fredrik Thulin

2016-06-28	Only SO and wheel are allowed to upload.	Paul Selkirk
	Also add bootloader upload.
2016-06-28	Fix the bootloader to accept firmware (with PIN login).	Paul Selkirk
	This involves entirely too much duplication of the CLI.
2016-06-27	Remove old default user.	Paul Selkirk

2016-06-27	Modify cli-test/filetransfer to prompt for PIN.	Paul Selkirk

2016-06-26	PIN-based login	Paul Selkirk

2016-06-25	Merge branch 'alternate_dma'	Paul Selkirk

2016-06-25	Split LIB*_DIR into _SRC and _BLD.	Paul Selkirk
	Also rename all instances of GNUmakefile to Makefile.
2016-06-25	Finish unwinding subrepository hairball: VPATH setup.	Rob Austein

2016-06-24	Start unwinding subrepository hairball: remove submodules.	Rob Austein

2016-06-24	Don't mess with HAL_RSA_USE_MODEXP here, that's libhal's job.	Rob Austein

2016-06-24	Merge branch 'ft-ks_flash'	Fredrik Thulin

2016-06-24	Masterkey functions now return hal_error_t as suggested by Rob.	Fredrik Thulin

2016-06-24	The masterkey stuff was accidentally committed to master in libhal (by me)	Fredrik Thulin

2016-06-23	Drag in libhal update.	Rob Austein

2016-06-23	Drag submodule updates into sw/stm32.	Rob Austein

2016-06-23	Add masterkey and keystore commands.	Fredrik Thulin

2016-06-21	Update sw/stm32 to track recent subrepository commits, since without them it ↵	Rob Austein
	no longer compiles (sigh).
2016-06-17	libhal branch ft-ks_flash is merged to master	Fredrik Thulin

2016-06-16	use corresponding branch of libhal	Fredrik Thulin

2016-06-16	keystore_erase_sectors takes start and stop arguments now	Fredrik Thulin

2016-06-16	Merge branch 'master' into ft-ks_flash	Fredrik Thulin

2016-06-15	Use a 1-byte DMA buffer for management UART receives.	Paul Selkirk
	It sounds silly, but this gives us completion callbacks, so we don't spend out entire time slice polling the receive buffer for new characters (which kills performance for tasks that are doing real work). Besides, libcli wants to process a character at a time, so uart_cli_read just waits on the completion callback.
2016-06-14	Whack shell scripts to work on Debian Jessie too.	Rob Austein

2016-06-14	hsm project was failing with obscure make error because makefile did not ↵	Rob Austein
	specify dependency on libcli.
2016-06-14	Pull in sw/libhal CLIENT_TRANSPORT makefile fix.	Rob Austein

2016-06-14	Pull libhal changes into stm32 subrepo.	Rob Austein

2016-06-14	Track libhal RPC_MODE simplification; add bootloader to "all" target.	Rob Austein

2016-06-14	Bring sw/stm32 super-repository up to date with the ten zillion	Rob Austein
	commits which have been made in other repositories since the last time anybody bothered to synchronize this. Poster child for why this kind of recursive hairball belongs in release engineering rather than in source code repositories which are under active development, but that yak can wait a little while longer for its shave.
2016-06-14	Import cli-test into hsm pretty much as-is.	Paul Selkirk