aboutsummaryrefslogtreecommitdiff
path: root/spiflash_n25q128.c
diff options
context:
space:
mode:
Diffstat (limited to 'spiflash_n25q128.c')
-rw-r--r--spiflash_n25q128.c166
1 files changed, 62 insertions, 104 deletions
diff --git a/spiflash_n25q128.c b/spiflash_n25q128.c
index 5c4a3b2..5e10185 100644
--- a/spiflash_n25q128.c
+++ b/spiflash_n25q128.c
@@ -62,9 +62,6 @@ static inline int _n25q128_get_status_bit(struct spiflash_ctx *ctx, unsigned bit
uint8_t spi_tx[2];
uint8_t spi_rx[2];
- // result
- HAL_StatusTypeDef ok;
-
//assert(bitnum < sizeof(uint8_t));
// send READ STATUS command
@@ -72,11 +69,12 @@ static inline int _n25q128_get_status_bit(struct spiflash_ctx *ctx, unsigned bit
// send command, read response, deselect
_n25q128_select(ctx);
- ok = HAL_SPI_TransmitReceive(ctx->hspi, spi_tx, spi_rx, 2, N25Q128_SPI_TIMEOUT);
+ int ok =
+ HAL_SPI_TransmitReceive(ctx->hspi, spi_tx, spi_rx, 2, N25Q128_SPI_TIMEOUT) == HAL_OK;
_n25q128_deselect(ctx);
// check
- if (ok != HAL_OK) return -1;
+ if (!ok) return -1;
// done
return ((spi_rx[1] >> bitnum) & 1);
@@ -95,89 +93,85 @@ static inline int _n25q128_get_wip_flag(struct spiflash_ctx *ctx)
}
/* Wait until the flash memory is done writing */
-static int _n25q128_wait_while_wip(struct spiflash_ctx *ctx, uint32_t timeout)
+static HAL_StatusTypeDef _n25q128_wait_while_wip(struct spiflash_ctx *ctx, uint32_t timeout)
{
uint32_t tick_end = HAL_GetTick() + timeout;
- int i;
do {
- i = _n25q128_get_wip_flag(ctx);
- if (i < 0) return 0;
- if (! i) return 1;
+ switch (_n25q128_get_wip_flag(ctx)) {
+ case 0:
+ return HAL_OK;
+ case -1:
+ return HAL_ERROR;
+ default:
+ /* try again */
+ continue;
+ }
} while (HAL_GetTick() < tick_end);
- return 0;
+ return HAL_TIMEOUT;
}
/* Send the Write Enable command */
-static int _n25q128_write_enable(struct spiflash_ctx *ctx)
+static HAL_StatusTypeDef _n25q128_write_enable(struct spiflash_ctx *ctx)
{
// tx buffer
uint8_t spi_tx[1];
- // result
- HAL_StatusTypeDef ok;
-
// enable writing
spi_tx[0] = N25Q128_COMMAND_WRITE_ENABLE;
// activate, send command, deselect
_n25q128_select(ctx);
- ok = HAL_SPI_Transmit(ctx->hspi, spi_tx, 1, N25Q128_SPI_TIMEOUT);
+ int ok =
+ HAL_SPI_Transmit(ctx->hspi, spi_tx, 1, N25Q128_SPI_TIMEOUT) == HAL_OK;
_n25q128_deselect(ctx);
// check
- if (ok != HAL_OK) return -1;
+ if (!ok) return HAL_ERROR;
// make sure, that write enable did the job
- return _n25q128_get_wel_flag(ctx);
+ return _n25q128_get_wel_flag(ctx) ? HAL_OK : HAL_ERROR;
}
-int n25q128_check_id(struct spiflash_ctx *ctx)
+HAL_StatusTypeDef n25q128_check_id(struct spiflash_ctx *ctx)
{
// tx, rx buffers
uint8_t spi_tx[4];
uint8_t spi_rx[4];
- // result
- HAL_StatusTypeDef ok;
-
// send READ ID command
spi_tx[0] = N25Q128_COMMAND_READ_ID;
// select, send command & read response, deselect
_n25q128_select(ctx);
- ok = HAL_SPI_TransmitReceive(ctx->hspi, spi_tx, spi_rx, 4, N25Q128_SPI_TIMEOUT);
+ int ok =
+ HAL_SPI_TransmitReceive(ctx->hspi, spi_tx, spi_rx, 4, N25Q128_SPI_TIMEOUT) == HAL_OK;
_n25q128_deselect(ctx);
// check
- if (ok != HAL_OK) return 0;
+ if (!ok) return HAL_ERROR;
// parse response (note, that the very first byte was received during the
// transfer of the command byte, so it contains garbage and should
// be ignored here)
- if (spi_rx[1] != N25Q128_ID_MANUFACTURER) return 0;
- if (spi_rx[2] != N25Q128_ID_DEVICE_TYPE) return 0;
- if (spi_rx[3] != N25Q128_ID_DEVICE_CAPACITY) return 0;
-
- // done
- return 1;
+ return
+ (spi_rx[1] == N25Q128_ID_MANUFACTURER &&
+ spi_rx[2] == N25Q128_ID_DEVICE_TYPE &&
+ spi_rx[3] == N25Q128_ID_DEVICE_CAPACITY) ? HAL_OK : HAL_ERROR;
}
-int n25q128_write_page(struct spiflash_ctx *ctx, uint32_t page_offset, const uint8_t *page_buffer)
+HAL_StatusTypeDef n25q128_write_page(struct spiflash_ctx *ctx, uint32_t page_offset, const uint8_t *page_buffer)
{
// tx buffer
uint8_t spi_tx[4];
- // result
- HAL_StatusTypeDef ok;
-
// check offset
- if (page_offset >= N25Q128_NUM_PAGES) return 0;
+ if (page_offset >= N25Q128_NUM_PAGES) return HAL_ERROR;
// enable writing
- if (_n25q128_write_enable(ctx) != 1) return 0;
+ if (_n25q128_write_enable(ctx) != 0) return HAL_ERROR;
// calculate byte address
uint32_t byte_offset = page_offset * N25Q128_PAGE_SIZE;
@@ -188,44 +182,31 @@ int n25q128_write_page(struct spiflash_ctx *ctx, uint32_t page_offset, const uin
spi_tx[2] = (uint8_t)(byte_offset >> 8);
spi_tx[3] = (uint8_t)(byte_offset >> 0);
- // activate, send command
+ // activate, send command, send data, deselect
_n25q128_select(ctx);
- ok = HAL_SPI_Transmit(ctx->hspi, spi_tx, 4, N25Q128_SPI_TIMEOUT);
-
- // check
- if (ok != HAL_OK) {
- _n25q128_deselect(ctx);
- return 0;
- }
-
- // send data, deselect
- ok = HAL_SPI_Transmit(ctx->hspi, (uint8_t *) page_buffer, N25Q128_PAGE_SIZE, N25Q128_SPI_TIMEOUT);
+ int ok =
+ HAL_SPI_Transmit(ctx->hspi, spi_tx, 4, N25Q128_SPI_TIMEOUT) == HAL_OK &&
+ HAL_SPI_Transmit(ctx->hspi, (uint8_t *) page_buffer, N25Q128_PAGE_SIZE, N25Q128_SPI_TIMEOUT) == HAL_OK;
_n25q128_deselect(ctx);
// check
- if (ok != HAL_OK) return 0;
+ if (!ok) return HAL_ERROR;
// wait until write finishes
- if (! _n25q128_wait_while_wip(ctx, 1000)) return 0;
-
- // done
- return 1;
+ return _n25q128_wait_while_wip(ctx, 1000);
}
static int n25q128_erase_something(struct spiflash_ctx *ctx, uint8_t command, uint32_t byte_offset)
{
// check offset
- if (byte_offset >= N25Q128_NUM_BYTES) return 0;
+ if (byte_offset >= N25Q128_NUM_BYTES) return HAL_ERROR;
// tx buffer
uint8_t spi_tx[4];
- // result
- HAL_StatusTypeDef ok;
-
// enable writing
- if (_n25q128_write_enable(ctx) != 1) return 0;
+ if (_n25q128_write_enable(ctx) != 0) return HAL_ERROR;
// send command (ERASE SECTOR or ERASE SUBSECTOR)
spi_tx[0] = command;
@@ -235,70 +216,61 @@ static int n25q128_erase_something(struct spiflash_ctx *ctx, uint8_t command, ui
// activate, send command, deselect
_n25q128_select(ctx);
- ok = HAL_SPI_Transmit(ctx->hspi, spi_tx, 4, N25Q128_SPI_TIMEOUT);
+ int ok =
+ HAL_SPI_Transmit(ctx->hspi, spi_tx, 4, N25Q128_SPI_TIMEOUT) == HAL_OK;
_n25q128_deselect(ctx);
// check
- if (ok != HAL_OK) return 0;
+ if (!ok) return HAL_ERROR;
// wait for erase to finish
-
- if (! _n25q128_wait_while_wip(ctx, 1000)) return 0;
-
- // done
- return 1;
+ return _n25q128_wait_while_wip(ctx, 1000);
}
-int n25q128_erase_sector(struct spiflash_ctx *ctx, uint32_t sector_offset)
+HAL_StatusTypeDef n25q128_erase_sector(struct spiflash_ctx *ctx, uint32_t sector_offset)
{
return n25q128_erase_something(ctx, N25Q128_COMMAND_ERASE_SECTOR,
sector_offset * N25Q128_SECTOR_SIZE);
}
-int n25q128_erase_subsector(struct spiflash_ctx *ctx, uint32_t subsector_offset)
+HAL_StatusTypeDef n25q128_erase_subsector(struct spiflash_ctx *ctx, uint32_t subsector_offset)
{
return n25q128_erase_something(ctx, N25Q128_COMMAND_ERASE_SUBSECTOR,
subsector_offset * N25Q128_SUBSECTOR_SIZE);
}
-int n25q128_erase_bulk(struct spiflash_ctx *ctx)
+HAL_StatusTypeDef n25q128_erase_bulk(struct spiflash_ctx *ctx)
{
// tx buffer
uint8_t spi_tx[1];
- // result
- HAL_StatusTypeDef ok;
-
// enable writing
- if (_n25q128_write_enable(ctx) != 1) return 0;
+ if (_n25q128_write_enable(ctx) != 0) return HAL_ERROR;
// send command
spi_tx[0] = N25Q128_COMMAND_ERASE_BULK;
// activate, send command, deselect
_n25q128_select(ctx);
- ok = HAL_SPI_Transmit(ctx->hspi, spi_tx, 1, N25Q128_SPI_TIMEOUT);
+ int ok =
+ HAL_SPI_Transmit(ctx->hspi, spi_tx, 1, N25Q128_SPI_TIMEOUT) == HAL_OK;
_n25q128_deselect(ctx);
// check
- if (ok != HAL_OK) return 0;
+ if (!ok) return HAL_ERROR;
// wait for erase to finish
-
- if (! _n25q128_wait_while_wip(ctx, 60000)) return 0;
-
- // done
- return 1;
+ return _n25q128_wait_while_wip(ctx, 60000);
}
/* This function writes of a number of pages to the flash memory.
* The caller is responsible for ensuring that the pages have been erased.
*/
-int n25q128_write_data(struct spiflash_ctx *ctx, uint32_t offset, const uint8_t *buf, const uint32_t len)
+HAL_StatusTypeDef n25q128_write_data(struct spiflash_ctx *ctx, uint32_t offset, const uint8_t *buf, const uint32_t len)
{
uint32_t page;
@@ -320,29 +292,25 @@ int n25q128_write_data(struct spiflash_ctx *ctx, uint32_t offset, const uint8_t
* it anyway.
*/
- if ((offset % N25Q128_PAGE_SIZE) != 0) return -1;
- if ((len % N25Q128_PAGE_SIZE) != 0) return -2;
+ if (offset % N25Q128_PAGE_SIZE != 0 || len % N25Q128_PAGE_SIZE != 0) return HAL_ERROR;
for (page = 0; page < len / N25Q128_PAGE_SIZE; page++) {
- if (! n25q128_write_page(ctx, offset / N25Q128_PAGE_SIZE, buf)) {
- return -6;
+ if (n25q128_write_page(ctx, offset / N25Q128_PAGE_SIZE, buf) != 0) {
+ return HAL_ERROR;
}
buf += N25Q128_PAGE_SIZE;
offset += N25Q128_PAGE_SIZE;
}
- return 1;
+ return HAL_OK;
}
/* This function reads zero or more pages from the SPI flash. */
-int n25q128_read_data(struct spiflash_ctx *ctx, uint32_t offset, uint8_t *buf, const uint32_t len)
+HAL_StatusTypeDef n25q128_read_data(struct spiflash_ctx *ctx, uint32_t offset, uint8_t *buf, const uint32_t len)
{
// tx buffer
uint8_t spi_tx[4];
- // result
- HAL_StatusTypeDef ok;
-
/*
* The data sheet says:
* The addressed byte can be at any location, and the address
@@ -356,7 +324,7 @@ int n25q128_read_data(struct spiflash_ctx *ctx, uint32_t offset, uint8_t *buf, c
*/
// avoid overflow
- if (offset + len > N25Q128_NUM_BYTES) return -3;
+ if (offset + len > N25Q128_NUM_BYTES) return HAL_ERROR;
// prepare READ command
spi_tx[0] = N25Q128_COMMAND_READ;
@@ -364,23 +332,13 @@ int n25q128_read_data(struct spiflash_ctx *ctx, uint32_t offset, uint8_t *buf, c
spi_tx[2] = (uint8_t)(offset >> 8);
spi_tx[3] = (uint8_t)(offset >> 0);
- // activate, send command
+ // activate, send command, read response, deselect
_n25q128_select(ctx);
- ok = HAL_SPI_Transmit(ctx->hspi, spi_tx, 4, N25Q128_SPI_TIMEOUT);
-
- // check
- if (ok != HAL_OK) {
- _n25q128_deselect(ctx);
- return 0;
- }
-
- // read response, deselect
- ok = HAL_SPI_Receive(ctx->hspi, buf, len, N25Q128_SPI_TIMEOUT);
+ int ok =
+ HAL_SPI_Transmit(ctx->hspi, spi_tx, 4, N25Q128_SPI_TIMEOUT) == HAL_OK &&
+ HAL_SPI_Receive(ctx->hspi, buf, len, N25Q128_SPI_TIMEOUT) == HAL_OK;
_n25q128_deselect(ctx);
// check
- if (ok != HAL_OK) return 0;
-
- // done
- return 1;
+ return ok ? HAL_OK : HAL_ERROR;
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-01 01:28:09 +0000