diff options
Diffstat (limited to 'projects')
| -rw-r--r-- | projects/cli-test/Makefile | 3 | ||||
| -rw-r--r-- | projects/cli-test/mgmt-misc.c | 10 | ||||
| -rw-r--r-- | projects/cli-test/mgmt-show.c | 22 | ||||
| -rw-r--r-- | projects/cli-test/mgmt-test.c | 75 | ||||
| -rw-r--r-- | projects/cli-test/test-fmc.c | 197 | ||||
| -rw-r--r-- | projects/cli-test/test-fmc.h | 43 |
6 files changed, 345 insertions, 5 deletions
diff --git a/projects/cli-test/Makefile b/projects/cli-test/Makefile index 5a6cea8..11c1737 100644 --- a/projects/cli-test/Makefile +++ b/projects/cli-test/Makefile @@ -8,9 +8,10 @@ OBJS = \ mgmt-keystore.o \ mgmt-masterkey.o \ mgmt-misc.o \ - test-mkmif.o \ mgmt-show.o \ mgmt-test.o \ + test-fmc.o \ + test-mkmif.o \ test_sdram.o BOARD_OBJS = \ diff --git a/projects/cli-test/mgmt-misc.c b/projects/cli-test/mgmt-misc.c index 535f0af..b7b4fcc 100644 --- a/projects/cli-test/mgmt-misc.c +++ b/projects/cli-test/mgmt-misc.c @@ -58,14 +58,14 @@ int cli_receive_data(struct cli_def *cli, uint8_t *buf, size_t len, cli_data_cal if (! control_mgmt_uart_dma_rx(DMA_RX_STOP)) { cli_print(cli, "Failed stopping DMA"); - return CLI_OK; + goto fail; } cli_print(cli, "OK, write size (4 bytes), data in %li byte chunks, CRC-32 (4 bytes)", (uint32_t) n); if (uart_receive_bytes(STM_UART_MGMT, (void *) &filesize, 4, 1000) != HAL_OK) { cli_print(cli, "Receive timed out"); - return CLI_ERROR; + goto fail; } cli_print(cli, "Send %li bytes of data", filesize); @@ -80,7 +80,7 @@ int cli_receive_data(struct cli_def *cli, uint8_t *buf, size_t len, cli_data_cal if (uart_receive_bytes(STM_UART_MGMT, (void *) buf, n, 1000) != HAL_OK) { cli_print(cli, "Receive timed out"); - return CLI_ERROR; + goto fail; } filesize -= n; my_crc = update_crc(my_crc, buf, n); @@ -90,7 +90,7 @@ int cli_receive_data(struct cli_def *cli, uint8_t *buf, size_t len, cli_data_cal */ if (data_callback != NULL && ! data_callback(buf, (size_t) n)) { cli_print(cli, "Data processing failed"); - return CLI_OK; + goto fail; } counter++; @@ -106,6 +106,8 @@ int cli_receive_data(struct cli_def *cli, uint8_t *buf, size_t len, cli_data_cal cli_print(cli, "CRC checksum did NOT match"); } + fail: + control_mgmt_uart_dma_rx(DMA_RX_START); return CLI_OK; } diff --git a/projects/cli-test/mgmt-show.c b/projects/cli-test/mgmt-show.c index e88b784..7d6b509 100644 --- a/projects/cli-test/mgmt-show.c +++ b/projects/cli-test/mgmt-show.c @@ -69,6 +69,25 @@ static int cmd_show_fpga_status(struct cli_def *cli, const char *command, char * return CLI_OK; } +static int cmd_show_fpga_cores(struct cli_def *cli, const char *command, char *argv[], int argc) +{ + const hal_core_t *core; + const hal_core_info_t *info; + + if (! fpgacfg_check_done()) { + cli_print(cli, "FPGA has not loaded a bitstream"); + return CLI_OK; + } + + for (core = hal_core_iterate(NULL); core != NULL; core = hal_core_iterate(core)) { + info = hal_core_info(core); + cli_print(cli, "%04x: %8.8s %4.4s", + (unsigned int)info->base, info->name, info->version); + } + + return CLI_OK; +} + static int cmd_show_keystore_status(struct cli_def *cli, const char *command, char *argv[], int argc) { cli_print(cli, "Keystore memory is %sonline", (keystore_check_id() != 1) ? "NOT ":""); @@ -135,6 +154,9 @@ void configure_cli_show(struct cli_def *cli) /* show fpga status*/ cli_register_command(cli, c_fpga, "status", cmd_show_fpga_status, 0, 0, "Show status about the FPGA"); + /* show fpga cores*/ + cli_register_command(cli, c_fpga, "cores", cmd_show_fpga_cores, 0, 0, "Show the currently available FPGA cores"); + struct cli_command *c_keystore = cli_register_command(cli, c, "keystore", NULL, 0, 0, NULL); /* show keystore status*/ diff --git a/projects/cli-test/mgmt-test.c b/projects/cli-test/mgmt-test.c index 138982f..59f0b6e 100644 --- a/projects/cli-test/mgmt-test.c +++ b/projects/cli-test/mgmt-test.c @@ -35,12 +35,15 @@ #include "stm-init.h" #include "stm-led.h" #include "stm-sdram.h" +#include "stm-fmc.h" +#include "stm-fpgacfg.h" #include "mgmt-cli.h" #include "mgmt-test.h" #include "test_sdram.h" #include "test_mkmif.h" +#include "test-fmc.h" #include <stdlib.h> @@ -107,6 +110,75 @@ static int cmd_test_sdram(struct cli_def *cli, const char *command, char *argv[] return CLI_OK; } +static int cmd_test_fmc(struct cli_def *cli, const char *command, char *argv[], int argc) +{ + int i, num_cycles = 1, num_rounds = 100000; + + if (argc >= 1) { + num_cycles = strtol(argv[0], NULL, 0); + if (num_cycles > 100000) num_cycles = 100000; + if (num_cycles < 1) num_cycles = 1; + } + + if (argc == 2) { + num_rounds = strtol(argv[1], NULL, 0); + if (num_rounds > 1000000) num_rounds = 1000000; + if (num_rounds < 1) num_rounds = 1; + } + + cli_print(cli, "Checking if FPGA has loaded it's bitstream"); + // Blink blue LED until the FPGA reports it has loaded it's bitstream + led_on(LED_BLUE); + while (! fpgacfg_check_done()) { + for (i = 0; i < 4; i++) { + HAL_Delay(500); + led_toggle(LED_BLUE); + } + } + + // prepare fmc interface + cli_print(cli, "Initializing FMC interface"); + fmc_init(); + + // turn on green led, turn off other leds + led_on(LED_GREEN); + led_off(LED_YELLOW); + led_off(LED_RED); + led_off(LED_BLUE); + + // vars + volatile int data_test_ok = 0, addr_test_ok = 0, successful_runs = 0, failed_runs = 0, sleep = 0; + + for (i = 1; i <= num_cycles; i++) { + cli_print(cli, "Starting FMC test (%i/%i)", i, num_cycles); + + // test data bus + data_test_ok = test_fpga_data_bus(cli, num_rounds); + // test address bus + addr_test_ok = test_fpga_address_bus(cli, num_rounds); + + cli_print(cli, "Data: %i, addr %i", data_test_ok, addr_test_ok); + + if (data_test_ok == num_rounds && + addr_test_ok == num_rounds) { + // toggle yellow led to indicate, that we are alive + led_toggle(LED_YELLOW); + + successful_runs++; + sleep = 0; + } else { + led_on(LED_RED); + failed_runs++; + sleep = 2000; + } + + cli_print(cli, "Success %i, failed %i runs\r\n", successful_runs, failed_runs); + HAL_Delay(sleep); + } + + return CLI_OK; +} + void configure_cli_test(struct cli_def *cli) { struct cli_command *c = cli_register_command(cli, NULL, "test", NULL, 0, 0, NULL); @@ -116,4 +188,7 @@ void configure_cli_test(struct cli_def *cli) /* test mkmif */ cli_register_command(cli, c, "mkmif", cmd_test_mkmif, 0, 0, "Run Master Key Memory Interface tests"); + + /* test fmc */ + cli_register_command(cli, c, "fmc", cmd_test_fmc, 0, 0, "Run FMC bus tests"); } diff --git a/projects/cli-test/test-fmc.c b/projects/cli-test/test-fmc.c new file mode 100644 index 0000000..ea9afef --- /dev/null +++ b/projects/cli-test/test-fmc.c @@ -0,0 +1,197 @@ +/* + * test-fmc.c + * ----------- + * FPGA communication bus (FMC) tests. + * + * Copyright (c) 2016, NORDUnet A/S All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * - Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * - Neither the name of the NORDUnet nor the names of its contributors may + * be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A + * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED + * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/* + This requires a special bitstream with a special test register. + See core/platform/novena/fmc/rtl/novena_fmc_top.v, sections marked + `ifdef test: + //---------------------------------------------------------------- + // Dummy Register + // + // General-purpose register to test FMC interface using STM32 + // demo program instead of core selector logic. + // + // This register is a bit tricky, but it allows testing of both + // data and address buses. Reading from FPGA will always return + // value, which is currently stored in the test register, + // regardless of read transaction address. Writing to FPGA has + // two variants: a) writing to address 0 will store output data + // data value in the test register, b) writing to any non-zero + // address will store _address_ of write transaction in the test + // register. + // + // To test data bus, write some different patterns to address 0, + // then readback from any address and compare. + // + // To test address bus, write anything to some different non-zero + // addresses, then readback from any address and compare returned + // value with previously written address. + // + //---------------------------------------------------------------- + */ + +#include "stm-init.h" +#include "stm-fmc.h" +#include "stm-uart.h" + +#include "test-fmc.h" + +static RNG_HandleTypeDef rng_inst; + +/* These are some interesting-to-look-at-in-the-debugger values that are declared + * volatile so that the compiler wouldn't optimize/obscure them. + */ +volatile uint32_t data_diff = 0; +volatile uint32_t addr_diff = 0; + + +int test_fpga_data_bus(struct cli_def *cli, uint32_t test_rounds) +{ + int c, ok; + uint32_t rnd, buf; + HAL_StatusTypeDef hal_result; + + /* initialize stm32 rng */ + rng_inst.Instance = RNG; + HAL_RNG_Init(&rng_inst); + + /* run some rounds of data bus test */ + for (c = 0; c < test_rounds; c++) { + data_diff = 0; + /* try to generate "random" number */ + hal_result = HAL_RNG_GenerateRandomNumber(&rng_inst, &rnd); + if (hal_result != HAL_OK) { + cli_print(cli, "STM32 RNG failed"); + break; + } + + /* write value to fpga at address 0 */ + ok = fmc_write_32(0, &rnd); + if (ok != 0) { + cli_print(cli, "FMC write failed: 0x%x", ok); + break; + } + + /* read value from fpga */ + ok = fmc_read_32(0, &buf); + if (ok != 0) { + cli_print(cli, "FMC read failed: 0x%x", ok); + break; + } + + /* compare (abort testing in case of error) */ + data_diff = buf ^ rnd; + if (data_diff) { + cli_print(cli, "Data bus FAIL: expected %lx got %lx", rnd, buf); + uart_send_string2(STM_UART_MGMT, (char *) "Binary diff: "); + uart_send_number2(STM_UART_MGMT, data_diff, 32, 2); + uart_send_string2(STM_UART_MGMT, "\r\n"); + + break; + } + } + + if (! data_diff) { + cli_print(cli, "Sample of data bus test data: expected 0x%lx got 0x%lx", rnd, buf); + } + + /* return number of successful tests */ + return c; +} + +int test_fpga_address_bus(struct cli_def *cli, uint32_t test_rounds) +{ + int c, ok; + uint32_t rnd, buf; + HAL_StatusTypeDef hal_result; + + /* initialize stm32 rng */ + rng_inst.Instance = RNG; + HAL_RNG_Init(&rng_inst); + + /* run some rounds of address bus test */ + for (c = 0; c < test_rounds; c++) { + addr_diff = 0; + /* try to generate "random" number */ + hal_result = HAL_RNG_GenerateRandomNumber(&rng_inst, &rnd); + if (hal_result != HAL_OK) break; + + /* there are 26 physicaly connected address lines on the alpha, + but "only" 24 usable for now (the top two ones are used by FMC + to choose bank, and we only have one bank set up currently) + */ + rnd &= 0x3fffffc; + + /* don't test zero addresses (fpga will store data, not address) */ + if (rnd == 0) continue; + + /* write dummy value to fpga at some non-zero address */ + ok = fmc_write_32(rnd, &buf); + if (ok != 0) { + cli_print(cli, "FMC write failed: 0x%x", ok); + break; + } + + /* read value from fpga */ + ok = fmc_read_32(0, &buf); + if (ok != 0) { + cli_print(cli, "FMC read failed: 0x%x", ok); + break; + } + + /* fpga receives address of 32-bit word, while we need + byte address here to compare + */ + buf <<= 2; + + /* compare (abort testing in case of error) */ + addr_diff = buf ^ rnd; + if (addr_diff) { + cli_print(cli, "Address bus FAIL: expected 0x%lx got 0x%lx", rnd, buf); + uart_send_string2(STM_UART_MGMT, (char *) "Binary diff: "); + uart_send_number2(STM_UART_MGMT, addr_diff, 32, 2); + uart_send_string2(STM_UART_MGMT, "\r\n"); + + break; + } + } + + if (! addr_diff) { + cli_print(cli, "Sample of address bus test data: expected 0x%lx got 0x%lx", rnd, buf); + } + + /* return number of successful tests */ + return c; +} + diff --git a/projects/cli-test/test-fmc.h b/projects/cli-test/test-fmc.h new file mode 100644 index 0000000..c49da48 --- /dev/null +++ b/projects/cli-test/test-fmc.h @@ -0,0 +1,43 @@ +/* + * test-fmc.h + * ------------ + * Prototypes and defines for testing the FMC bus comms with the FPGA. + * + * Copyright (c) 2016, NORDUnet A/S All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * - Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * - Neither the name of the NORDUnet nor the names of its contributors may + * be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A + * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED + * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ +#ifndef __STM32_CLI_TEST_FMC_H +#define __STM32_CLI_TEST_FMC_H + +#include "mgmt-cli.h" + +extern int test_fpga_data_bus(struct cli_def *cli, uint32_t test_rounds); +extern int test_fpga_address_bus(struct cli_def *cli, uint32_t test_rounds); + + +#endif /* __STM32_CLI_TEST_FMC_H */ |