aboutsummaryrefslogtreecommitdiff
path: root/projects
diff options
context:
space:
mode:
Diffstat (limited to 'projects')
-rw-r--r--projects/bootloader/Makefile20
-rw-r--r--projects/bootloader/bootloader.c126
-rw-r--r--projects/bootloader/crc32.c62
-rw-r--r--projects/bootloader/dfu.c106
-rw-r--r--projects/bootloader/dfu.h62
-rw-r--r--projects/cli-test/Makefile2
-rw-r--r--projects/cli-test/cli-test.c25
-rwxr-xr-xprojects/cli-test/filetransfer9
-rw-r--r--projects/cli-test/mgmt-cli.c1
-rw-r--r--projects/cli-test/mgmt-cli.h4
-rw-r--r--projects/cli-test/mgmt-dfu.c120
-rw-r--r--projects/cli-test/mgmt-dfu.h59
-rw-r--r--projects/cli-test/test_sdram.h5
13 files changed, 596 insertions, 5 deletions
diff --git a/projects/bootloader/Makefile b/projects/bootloader/Makefile
new file mode 100644
index 0000000..4eef758
--- /dev/null
+++ b/projects/bootloader/Makefile
@@ -0,0 +1,20 @@
+PROG = bootloader
+
+OBJS = crc32.o dfu.o
+
+all: $(PROG:=.elf)
+
+%.elf: %.o $(BOARD_OBJS) $(OBJS) $(LIBS)
+ $(CC) $(CFLAGS) $^ -o $@ -T$(BOOTLOADER_LDSCRIPT) -g -Wl,-Map=$*.map
+ $(OBJCOPY) -O ihex $*.elf $*.hex
+ $(OBJCOPY) -O binary $*.elf $*.bin
+ $(OBJDUMP) -St $*.elf >$*.lst
+ $(SIZE) $*.elf
+
+clean:
+ rm -f *.o
+ rm -f *.elf
+ rm -f *.hex
+ rm -f *.bin
+ rm -f *.map
+ rm -f *.lst
diff --git a/projects/bootloader/bootloader.c b/projects/bootloader/bootloader.c
new file mode 100644
index 0000000..ab3c1d9
--- /dev/null
+++ b/projects/bootloader/bootloader.c
@@ -0,0 +1,126 @@
+/*
+ * bootloader.c
+ * ------------
+ * Bootloader to either install new firmware received from the MGMT UART,
+ * or jump to previously installed firmware.
+ *
+ * Copyright (c) 2016, NORDUnet A/S All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * - Neither the name of the NORDUnet nor the names of its contributors may
+ * be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "stm-init.h"
+#include "stm-led.h"
+#include "stm-uart.h"
+#include "dfu.h"
+
+/* Linker symbols are strange in C. Make regular pointers for sanity. */
+__IO uint32_t *dfu_control = &CRYPTECH_DFU_CONTROL;
+__IO uint32_t *dfu_firmware = &CRYPTECH_FIRMWARE_START;
+/* The first word in the firmware is an address to the stack (msp) */
+__IO uint32_t *dfu_msp_ptr = &CRYPTECH_FIRMWARE_START;
+/* The second word in the firmware is a pointer to the code
+ * (points at the Reset_Handler from the linker script).
+ */
+__IO uint32_t *dfu_code_ptr = &CRYPTECH_FIRMWARE_START + 1;
+
+typedef void (*pFunction)(void);
+
+/* This is it's own function to make it more convenient to set a breakpoint at it in gdb */
+void do_early_dfu_jump(void)
+{
+ pFunction loaded_app = (pFunction) *dfu_code_ptr;
+ /* Set the stack pointer to the correct one for the firmware */
+ __set_MSP(*dfu_msp_ptr);
+ /* Set the Vector Table Offset Register */
+ SCB->VTOR = (uint32_t) dfu_firmware;
+ loaded_app();
+ while (1);
+}
+
+int should_dfu()
+{
+ int i;
+ uint8_t rx = 0;
+
+ /* While blinking the blue LED for one second, see if we receive a CR on the MGMT UART.
+ * We've discussed also requiring one or both of the FPGA config jumpers installed
+ * before allowing DFU of the STM32 - that check could be done here.
+ */
+ led_on(LED_BLUE);
+ for (i = 0; i < 10; i++) {
+ HAL_Delay(100);
+ led_toggle(LED_BLUE);
+ if (uart_recv_char2(STM_UART_MGMT, &rx, 0) == HAL_OK) {
+ if (rx == 13) return 1;
+ }
+ }
+ return 0;
+}
+
+int
+main()
+{
+ int status;
+
+ /* Check if we've just rebooted in order to jump to the firmware. */
+ if (*dfu_control == HARDWARE_EARLY_DFU_JUMP) {
+ *dfu_control = 0;
+ do_early_dfu_jump();
+ }
+
+ stm_init();
+
+ uart_send_string2(STM_UART_MGMT, (char *) "\r\n\r\nThis is the bootloader speaking...");
+
+ if (should_dfu()) {
+ led_off(LED_BLUE);
+ if ((status = dfu_receive_firmware()) != 0) {
+ /* Upload of new firmware failed, reboot after lighting the red LED
+ * for three seconds.
+ */
+ led_off(LED_BLUE);
+ led_on(LED_RED);
+ uart_send_string2(STM_UART_MGMT, (char *) "dfu_receive_firmware failed: ");
+ uart_send_number2(STM_UART_MGMT, status, 3, 16);
+ uart_send_string2(STM_UART_MGMT, (char *) "\r\n\r\nRebooting in three seconds\r\n");
+ HAL_Delay(3000);
+ HAL_NVIC_SystemReset();
+ while (1) {};
+ }
+ }
+
+ /* Set dfu_control to the magic value that will cause the us to call do_early_dfu_jump
+ * after rebooting back into this main() function.
+ */
+ *dfu_control = HARDWARE_EARLY_DFU_JUMP;
+
+ uart_send_string2(STM_UART_MGMT, (char *) "loading firmware\r\n\r\n");
+
+ /* De-initialize hardware by rebooting */
+ HAL_NVIC_SystemReset();
+ while (1) {};
+}
diff --git a/projects/bootloader/crc32.c b/projects/bootloader/crc32.c
new file mode 100644
index 0000000..4d1a0bc
--- /dev/null
+++ b/projects/bootloader/crc32.c
@@ -0,0 +1,62 @@
+/* Reference code from RFC1952. Not meant to be used outside test code. */
+
+#include "stm32f4xx_hal.h"
+
+
+/* Table of CRCs of all 8-bit messages. */
+unsigned long crc_table[256];
+
+/* Flag: has the table been computed? Initially false. */
+int crc_table_computed = 0;
+
+/* Make the table for a fast CRC. */
+void make_crc_table(void)
+{
+ unsigned long c;
+
+ int n, k;
+ for (n = 0; n < 256; n++) {
+ c = (unsigned long) n;
+ for (k = 0; k < 8; k++) {
+ if (c & 1) {
+ c = 0xedb88320L ^ (c >> 1);
+ } else {
+ c = c >> 1;
+ }
+ }
+ crc_table[n] = c;
+ }
+ crc_table_computed = 1;
+}
+
+/*
+ Update a running crc with the bytes buf[0..len-1] and return
+ the updated crc. The crc should be initialized to zero. Pre- and
+ post-conditioning (one's complement) is performed within this
+ function so it shouldn't be done by the caller. Usage example:
+
+ unsigned long crc = 0L;
+
+ while (read_buffer(buffer, length) != EOF) {
+ crc = update_crc(crc, buffer, length);
+ }
+ if (crc != original_crc) error();
+*/
+uint32_t update_crc(uint32_t crc, uint8_t *buf, int len)
+{
+ unsigned long c = crc ^ 0xffffffffL;
+ int n;
+
+ if (!crc_table_computed)
+ make_crc_table();
+ for (n = 0; n < len; n++) {
+ c = crc_table[(c ^ buf[n]) & 0xff] ^ (c >> 8);
+ }
+ return c ^ 0xffffffffL;
+}
+
+/* Return the CRC of the bytes buf[0..len-1]. */
+unsigned long crc(unsigned char *buf, int len)
+{
+ return update_crc(0L, buf, len);
+}
diff --git a/projects/bootloader/dfu.c b/projects/bootloader/dfu.c
new file mode 100644
index 0000000..231e388
--- /dev/null
+++ b/projects/bootloader/dfu.c
@@ -0,0 +1,106 @@
+/*
+ * dfu.c
+ * ------------
+ * Receive new firmware from MGMT UART and write it to STM32 internal flash.
+ *
+ * Copyright (c) 2016, NORDUnet A/S All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * - Neither the name of the NORDUnet nor the names of its contributors may
+ * be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "dfu.h"
+#include "stm-led.h"
+#include "stm-uart.h"
+#include "stm-flash.h"
+
+#include <string.h>
+
+extern uint32_t update_crc(uint32_t crc, uint8_t *buf, int len);
+
+
+int dfu_receive_firmware(void)
+{
+ uint32_t filesize = 0, crc = 0, my_crc = 0, counter = 0;
+ uint32_t offset = DFU_FIRMWARE_ADDR, n = DFU_UPLOAD_CHUNK_SIZE;
+ uint32_t buf[DFU_UPLOAD_CHUNK_SIZE / 4];
+
+ uart_send_string2(STM_UART_MGMT, (char *) "\r\nOK, bootloader waiting for new firmware\r\n");
+
+ /* Read file size (4 bytes) */
+ uart_receive_bytes(STM_UART_MGMT, (void *) &filesize, 4, 1000);
+ if (filesize < 512 || filesize > DFU_FIRMWARE_END_ADDR - DFU_FIRMWARE_ADDR) {
+ return -1;
+ }
+
+ HAL_FLASH_Unlock();
+
+ while (filesize) {
+ /* By initializing buf to the same value that erased flash has (0xff), we don't
+ * have to try and be smart when writing the last page of data to the memory.
+ */
+ memset(buf, 0xffffffff, sizeof(buf));
+
+ if (filesize < n) {
+ n = filesize;
+ }
+
+ if (uart_receive_bytes(STM_UART_MGMT, (void *) &buf, n, 1000) != HAL_OK) {
+ return -2;
+ }
+ filesize -= n;
+
+ /* After reception of a chunk but before ACKing we have "all" the time in the world to
+ * calculate CRC and write it to flash.
+ */
+ my_crc = update_crc(my_crc, (uint8_t *) buf, n);
+ stm_flash_write32(offset, buf, sizeof(buf) / 4);
+ offset += DFU_UPLOAD_CHUNK_SIZE;
+
+ /* ACK this chunk by sending the current chunk counter (4 bytes) */
+ counter++;
+ uart_send_bytes(STM_UART_MGMT, (void *) &counter, 4);
+ led_toggle(LED_BLUE);
+ }
+
+ HAL_FLASH_Lock();
+
+ /* The sending side will now send it's calculated CRC-32 */
+ uart_receive_bytes(STM_UART_MGMT, (void *) &crc, 4, 1000);
+ if (crc == my_crc) {
+ uart_send_string2(STM_UART_MGMT, (char *) "\r\nSuccess\r\n");
+ return 0;
+ }
+
+ led_on(LED_RED);
+ led_on(LED_YELLOW);
+
+ /* Better to erase the known bad firmware */
+ stm_flash_erase_sectors(DFU_FIRMWARE_ADDR, DFU_FIRMWARE_END_ADDR);
+
+ led_off(LED_YELLOW);
+
+ return 0;
+}
diff --git a/projects/bootloader/dfu.h b/projects/bootloader/dfu.h
new file mode 100644
index 0000000..8dfed9d
--- /dev/null
+++ b/projects/bootloader/dfu.h
@@ -0,0 +1,62 @@
+/*
+ * dfu.h
+ * ---------
+ * Device Firmware Upgrade defines and prototypes.
+ *
+ * Copyright (c) 2016, NORDUnet A/S All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * - Neither the name of the NORDUnet nor the names of its contributors may
+ * be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __STM32_BOOTLOADER_DFU_H
+#define __STM32_BOOTLOADER_DFU_H
+
+#include "stm-init.h"
+
+/* symbols defined in the linker script (STM32F429BI_bootloader.ld) */
+extern uint32_t CRYPTECH_FIRMWARE_START;
+extern uint32_t CRYPTECH_FIRMWARE_END;
+extern uint32_t CRYPTECH_DFU_CONTROL;
+
+#define DFU_FIRMWARE_ADDR ((uint32_t) &CRYPTECH_FIRMWARE_START)
+#define DFU_FIRMWARE_END_ADDR ((uint32_t) &CRYPTECH_FIRMWARE_END)
+#define DFU_UPLOAD_CHUNK_SIZE 4096
+
+/* Magic bytes to signal the bootloader it should jump to the firmware
+ * instead of trying to receive a new firmware using the MGMT UART.
+ */
+#define HARDWARE_EARLY_DFU_JUMP 0xBADABADA
+
+extern __IO uint32_t *dfu_control;
+extern __IO uint32_t *dfu_firmware;
+extern __IO uint32_t *dfu_msp_ptr;
+extern __IO uint32_t *dfu_code_ptr;
+
+extern int dfu_receive_firmware(void);
+
+
+#endif /* __STM32_BOOTLOADER_DFU_H */
diff --git a/projects/cli-test/Makefile b/projects/cli-test/Makefile
index 7737e13..39619fc 100644
--- a/projects/cli-test/Makefile
+++ b/projects/cli-test/Makefile
@@ -1,6 +1,6 @@
TEST = cli-test
-OBJS = crc32.o mgmt-cli.o test_sdram.o
+OBJS = crc32.o mgmt-cli.o test_sdram.o mgmt-dfu.o
CFLAGS += -I$(LIBCLI_DIR)
LIBS += $(LIBCLI_DIR)/libcli.a
diff --git a/projects/cli-test/cli-test.c b/projects/cli-test/cli-test.c
index 41d7365..84c268b 100644
--- a/projects/cli-test/cli-test.c
+++ b/projects/cli-test/cli-test.c
@@ -39,6 +39,7 @@
#include "stm-keystore.h"
#include "stm-sdram.h"
#include "mgmt-cli.h"
+#include "mgmt-dfu.h"
#include "test_sdram.h"
#include <string.h>
@@ -396,7 +397,7 @@ void configure_cli_test(struct cli_def *cli)
cli_command_node(test, sdram, "Run SDRAM tests");
}
-void configure_cli_misc(struct cli_def *cli)
+static void configure_cli_misc(struct cli_def *cli)
{
/* filetransfer */
cli_command_root_node(filetransfer, "Test file transfering");
@@ -404,11 +405,32 @@ void configure_cli_misc(struct cli_def *cli)
cli_command_root_node(reboot, "Reboot the STM32");
}
+typedef void (*pFunction)(void);
+
+/* This is it's own function to make it more convenient to set a breakpoint at it in gdb */
+void do_early_dfu_jump(void)
+{
+ pFunction loaded_app = (pFunction) *dfu_code_ptr;
+ /* Set the stack pointer to the correct one for the firmware */
+ __set_MSP(*dfu_msp_ptr);
+ /* Set the Vector Table Offset Register */
+ SCB->VTOR = (uint32_t) dfu_firmware;
+ loaded_app();
+ while (1);
+}
+
+
int
main()
{
static struct cli_def cli;
+ /* Check if we've just rebooted in order to jump to the firmware. */
+ if (*dfu_control == HARDWARE_EARLY_DFU_JUMP) {
+ *dfu_control = 0;
+ do_early_dfu_jump();
+ }
+
stm_init();
led_on(LED_RED);
@@ -420,6 +442,7 @@ main()
configure_cli_fpga(&cli);
configure_cli_test(&cli);
configure_cli_misc(&cli);
+ configure_cli_dfu(&cli);
led_off(LED_RED);
led_on(LED_GREEN);
diff --git a/projects/cli-test/filetransfer b/projects/cli-test/filetransfer
index 2b74570..025a6ac 100755
--- a/projects/cli-test/filetransfer
+++ b/projects/cli-test/filetransfer
@@ -40,6 +40,7 @@ import argparse
from binascii import crc32
CHUNK_SIZE = 256
+DFU_CHUNK_SIZE = 256
FPGA_CHUNK_SIZE = 4096
@@ -57,6 +58,11 @@ def parse_args():
action='store_true', default=False,
help='Perform FPGA bitstream upload',
)
+ parser.add_argument('--dfu',
+ dest='dfu',
+ action='store_true', default=False,
+ help='Perform DFU application upload',
+ )
parser.add_argument('--device',
dest='device',
@@ -117,6 +123,9 @@ def send_file(filename, args, dst):
src.read(0x64)
chunk_size = FPGA_CHUNK_SIZE
response = _execute(dst, 'fpga bitstream upload')
+ elif args.dfu:
+ chunk_size = DFU_CHUNK_SIZE
+ response = _execute(dst, 'dfu upload')
else:
chunk_size = CHUNK_SIZE
response = _execute(dst, 'filetransfer')
diff --git a/projects/cli-test/mgmt-cli.c b/projects/cli-test/mgmt-cli.c
index faaafda..46faae8 100644
--- a/projects/cli-test/mgmt-cli.c
+++ b/projects/cli-test/mgmt-cli.c
@@ -31,7 +31,6 @@
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
-#include "stm32f4xx_hal.h"
#include "stm-init.h"
#include "stm-uart.h"
#include "mgmt-cli.h"
diff --git a/projects/cli-test/mgmt-cli.h b/projects/cli-test/mgmt-cli.h
index e6780a3..dd6a58b 100644
--- a/projects/cli-test/mgmt-cli.h
+++ b/projects/cli-test/mgmt-cli.h
@@ -35,7 +35,7 @@
#ifndef __STM32_MGMT_CLI_H
#define __STM32_MGMT_CLI_H
-#include "stm32f4xx_hal.h"
+#include "stm-init.h"
#include <libcli.h>
@@ -64,7 +64,7 @@
/* ROOT NODE is a label without a parent, but with a command associated with it */
#define cli_command_root_node(name, help) \
- _cli_cmd_struct(name, name, NULL, (char *) help); \
+ _cli_cmd_struct(name, name, cmd_##name, (char *) help); \
cli_register_command2(cli, &cmd_##name##_s, NULL)
diff --git a/projects/cli-test/mgmt-dfu.c b/projects/cli-test/mgmt-dfu.c
new file mode 100644
index 0000000..27fd722
--- /dev/null
+++ b/projects/cli-test/mgmt-dfu.c
@@ -0,0 +1,120 @@
+/*
+ * mgmt-dfu.c
+ * ---------
+ * CLI code for looking at, jumping to or erasing the loaded firmware.
+ *
+ * Copyright (c) 2016, NORDUnet A/S All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * - Neither the name of the NORDUnet nor the names of its contributors may
+ * be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "stm-init.h"
+#include "mgmt-cli.h"
+#include "stm-uart.h"
+#include "stm-flash.h"
+#include "mgmt-dfu.h"
+
+#include <string.h>
+
+extern uint32_t update_crc(uint32_t crc, uint8_t *buf, int len);
+
+/* Linker symbols are strange in C. Make regular pointers for sanity. */
+__IO uint32_t *dfu_control = &CRYPTECH_DFU_CONTROL;
+__IO uint32_t *dfu_firmware = &CRYPTECH_FIRMWARE_START;
+__IO uint32_t *dfu_firmware_end = &CRYPTECH_FIRMWARE_END;
+/* The first word in the firmware is an address to the stack (msp) */
+__IO uint32_t *dfu_msp_ptr = &CRYPTECH_FIRMWARE_START;
+/* The second word in the firmware is a pointer to the code
+ * (points at the Reset_Handler from the linker script).
+ */
+__IO uint32_t *dfu_code_ptr = &CRYPTECH_FIRMWARE_START + 1;
+
+
+
+int cmd_dfu_dump(struct cli_def *cli, const char *command, char *argv[], int argc)
+{
+ cli_print(cli, "First 256 bytes from DFU application address %p:\r\n", dfu_firmware);
+
+ uart_send_hexdump(STM_UART_MGMT, (uint8_t *) dfu_firmware, 0, 0xff);
+ uart_send_string2(STM_UART_MGMT, (char *) "\r\n\r\n");
+
+ return CLI_OK;
+}
+
+int cmd_dfu_erase(struct cli_def *cli, const char *command, char *argv[], int argc)
+{
+ int status;
+
+ cli_print(cli, "Erasing flash sectors %i to %i (address %p to %p) - expect the CLI to crash now",
+ stm_flash_sector_num((uint32_t) dfu_firmware),
+ stm_flash_sector_num((uint32_t) dfu_firmware_end),
+ dfu_firmware,
+ dfu_firmware_end);
+
+ if ((status = stm_flash_erase_sectors((uint32_t) dfu_firmware, (uint32_t) dfu_firmware_end)) != 0) {
+ cli_print(cli, "Failed erasing flash sectors (%i)", status);
+ }
+
+ return CLI_OK;
+}
+
+int cmd_dfu_jump(struct cli_def *cli, const char *command, char *argv[], int argc)
+{
+ uint32_t i;
+ /* Load first byte from the DFU_FIRMWARE_PTR to verify it contains an IVT before
+ * jumping there.
+ */
+ cli_print(cli, "Checking for application at %p", dfu_firmware);
+
+ i = *dfu_msp_ptr & 0xFF000000;
+ /* 'new_msp' is supposed to be a pointer to the new applications stack, it should
+ * point either at RAM (0x20000000) or at the CCM memory (0x10000000).
+ */
+ if (i == 0x20000000 || i == 0x10000000) {
+ /* Set dfu_control to the magic value that will cause the us to jump to the
+ * firmware from the CLI main() function after rebooting.
+ */
+ *dfu_control = HARDWARE_EARLY_DFU_JUMP;
+ cli_print(cli, "Making the leap");
+ HAL_NVIC_SystemReset();
+ while (1) { ; }
+ } else {
+ cli_print(cli, "No loaded application found at %p (read 0x%x)",
+ dfu_firmware, (unsigned int) *dfu_msp_ptr);
+ }
+
+ return CLI_OK;
+}
+
+void configure_cli_dfu(struct cli_def *cli)
+{
+ cli_command_root(dfu);
+
+ cli_command_node(dfu, dump, "Show the first 256 bytes of the loaded firmware");
+ cli_command_node(dfu, jump, "Jump to the loaded firmware");
+ cli_command_node(dfu, erase, "Erase the firmware memory (will crash the CLI)");
+}
diff --git a/projects/cli-test/mgmt-dfu.h b/projects/cli-test/mgmt-dfu.h
new file mode 100644
index 0000000..ac6589c
--- /dev/null
+++ b/projects/cli-test/mgmt-dfu.h
@@ -0,0 +1,59 @@
+/*
+ * mgmt-dfu.h
+ * ---------
+ * Management CLI Device Firmware Upgrade code.
+ *
+ * Copyright (c) 2016, NORDUnet A/S All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * - Neither the name of the NORDUnet nor the names of its contributors may
+ * be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __STM32_CLI_MGMT_DFU_H
+#define __STM32_CLI_MGMT_DFU_H
+
+#include "stm-init.h"
+#include <libcli.h>
+
+/* symbols defined in the linker script (STM32F429BI.ld) */
+extern uint32_t CRYPTECH_FIRMWARE_START;
+extern uint32_t CRYPTECH_FIRMWARE_END;
+extern uint32_t CRYPTECH_DFU_CONTROL;
+
+#define DFU_FIRMWARE_ADDR ((uint32_t) &CRYPTECH_FIRMWARE_START)
+#define DFU_FIRMWARE_END_ADDR ((uint32_t) &CRYPTECH_FIRMWARE_END)
+#define DFU_UPLOAD_CHUNK_SIZE 256
+#define HARDWARE_EARLY_DFU_JUMP 0xBADABADA
+
+extern __IO uint32_t *dfu_control;
+extern __IO uint32_t *dfu_firmware;
+extern __IO uint32_t *dfu_msp_ptr;
+extern __IO uint32_t *dfu_code_ptr;
+
+
+extern void configure_cli_dfu(struct cli_def *cli);
+
+#endif /* __STM32_CLI_MGMT_DFU_H */
diff --git a/projects/cli-test/test_sdram.h b/projects/cli-test/test_sdram.h
index b848d18..3076aa1 100644
--- a/projects/cli-test/test_sdram.h
+++ b/projects/cli-test/test_sdram.h
@@ -31,6 +31,9 @@
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
+#ifndef __STM32_CLI_TEST_SDRAM_H
+#define __STM32_CLI_TEST_SDRAM_H
+
extern uint32_t lfsr1;
extern uint32_t lfsr2;
@@ -40,3 +43,5 @@ extern int test_sdrams_interleaved(uint32_t *base_addr1, uint32_t *base_addr2);
extern uint32_t lfsr_next_32(uint32_t lfsr);
extern uint32_t lfsr_next_24(uint32_t lfsr);
+
+#endif /* __STM32_CLI_TEST_SDRAM_H */