aboutsummaryrefslogtreecommitdiff
path: root/projects/cli-test
diff options
context:
space:
mode:
Diffstat (limited to 'projects/cli-test')
-rw-r--r--projects/cli-test/cli-test.c23
-rw-r--r--projects/cli-test/mgmt-dfu.c237
-rw-r--r--projects/cli-test/mgmt-dfu.h17
3 files changed, 68 insertions, 209 deletions
diff --git a/projects/cli-test/cli-test.c b/projects/cli-test/cli-test.c
index 30623a4..84c268b 100644
--- a/projects/cli-test/cli-test.c
+++ b/projects/cli-test/cli-test.c
@@ -397,7 +397,7 @@ void configure_cli_test(struct cli_def *cli)
cli_command_node(test, sdram, "Run SDRAM tests");
}
-void configure_cli_misc(struct cli_def *cli)
+static void configure_cli_misc(struct cli_def *cli)
{
/* filetransfer */
cli_command_root_node(filetransfer, "Test file transfering");
@@ -405,11 +405,32 @@ void configure_cli_misc(struct cli_def *cli)
cli_command_root_node(reboot, "Reboot the STM32");
}
+typedef void (*pFunction)(void);
+
+/* This is it's own function to make it more convenient to set a breakpoint at it in gdb */
+void do_early_dfu_jump(void)
+{
+ pFunction loaded_app = (pFunction) *dfu_code_ptr;
+ /* Set the stack pointer to the correct one for the firmware */
+ __set_MSP(*dfu_msp_ptr);
+ /* Set the Vector Table Offset Register */
+ SCB->VTOR = (uint32_t) dfu_firmware;
+ loaded_app();
+ while (1);
+}
+
+
int
main()
{
static struct cli_def cli;
+ /* Check if we've just rebooted in order to jump to the firmware. */
+ if (*dfu_control == HARDWARE_EARLY_DFU_JUMP) {
+ *dfu_control = 0;
+ do_early_dfu_jump();
+ }
+
stm_init();
led_on(LED_RED);
diff --git a/projects/cli-test/mgmt-dfu.c b/projects/cli-test/mgmt-dfu.c
index 33c6e2e..27fd722 100644
--- a/projects/cli-test/mgmt-dfu.c
+++ b/projects/cli-test/mgmt-dfu.c
@@ -1,7 +1,7 @@
/*
* mgmt-dfu.c
* ---------
- * Management CLI Device Firmware Upgrade code.
+ * CLI code for looking at, jumping to or erasing the loaded firmware.
*
* Copyright (c) 2016, NORDUnet A/S All rights reserved.
*
@@ -35,188 +35,31 @@
#include "stm-init.h"
#include "mgmt-cli.h"
#include "stm-uart.h"
-#include "cmsis_nvic.h"
+#include "stm-flash.h"
+#include "mgmt-dfu.h"
#include <string.h>
extern uint32_t update_crc(uint32_t crc, uint8_t *buf, int len);
-/* symbols defined in the linker script (STM32F429BI.ld) */
-extern uint32_t CRYPTECH_FIRMWARE_START;
-extern uint32_t CRYPTECH_FIRMWARE_END;
-extern uint32_t CRYPTECH_DFU_CONTROL;
-
-#define DFU_FIRMWARE_ADDR ((uint32_t ) &CRYPTECH_FIRMWARE_START)
-#define DFU_FIRMWARE_PTR ((__IO uint32_t *) (CRYPTECH_FIRMWARE_START))
-#define DFU_FIRMWARE_END_ADDR CRYPTECH_FIRMWARE_END
-#define HARDWARE_EARLY_DFU_JUMP 0xBADABADA
-#define DFU_UPLOAD_CHUNK_SIZE 256
-
+/* Linker symbols are strange in C. Make regular pointers for sanity. */
__IO uint32_t *dfu_control = &CRYPTECH_DFU_CONTROL;
-__IO uint32_t *dfu_new_msp = &CRYPTECH_FIRMWARE_START;
-__IO uint32_t *dfu_firmware = &CRYPTECH_FIRMWARE_START + 1;
-
-/* Flash sector offsets from RM0090, Table 6. Flash module - 2 Mbyte dual bank organization */
-#define FLASH_NUM_SECTORS 24 + 1
-uint32_t flash_sector_offsets[FLASH_NUM_SECTORS] = {
- /* Bank 1 */
- 0x08000000, /* #0, 16 KBytes */
- 0x08004000, /* #1, 16 Kbytes */
- 0x08008000, /* #2, 16 Kbytes */
- 0x0800C000, /* #3, 16 Kbytes */
- 0x08010000, /* #4, 64 Kbytes */
- 0x08020000, /* #5, 128 Kbytes */
- 0x08040000, /* #6, 128 Kbytes */
- 0x08060000, /* #7, 128 Kbytes */
- 0x08080000, /* #8, 128 Kbytes */
- 0x080A0000, /* #9, 128 Kbytes */
- 0x080C0000, /* #10, 128 Kbytes */
- 0x080E0000, /* #11, 128 Kbytes */
- /* Bank 2 */
- 0x08100000, /* #12, 16 Kbytes */
- 0x08104000, /* #13, 16 Kbytes */
- 0x08108000, /* #14, 16 Kbytes */
- 0x0810C000, /* #15, 16 Kbytes */
- 0x08110000, /* #16, 64 Kbytes */
- 0x08120000, /* #17, 128 Kbytes */
- 0x08140000, /* #18, 128 Kbytes */
- 0x08160000, /* #19, 128 Kbytes */
- 0x08180000, /* #20, 128 Kbytes */
- 0x081A0000, /* #21, 128 Kbytes */
- 0x081C0000, /* #22, 128 Kbytes */
- 0x081E0000, /* #23, 128 Kbytes */
- 0x08200000 /* first address *after* flash */
-};
-
-
-typedef void (*pFunction)(void);
-
-
-/* This is it's own function to make it more convenient to set a breakpoint at it in gdb */
-void do_early_dfu_jump(void)
-{
- //pFunction loaded_app = (pFunction) *(DFU_FIRMWARE_PTR + 1);
- pFunction loaded_app = (pFunction) *dfu_firmware;
- *dfu_control = 0;
- __set_MSP(*dfu_new_msp);
- /* Set the Vector Table Offset Register */
- SCB->VTOR = DFU_FIRMWARE_ADDR;
- loaded_app();
- while (1);
-}
-
-/* This function is called from main() before any peripherals are initialized */
-void check_early_dfu_jump(void)
-{
- if (*dfu_control == HARDWARE_EARLY_DFU_JUMP) {
- do_early_dfu_jump();
- }
-}
-
-inline int _flash_sector_num(uint32_t offset)
-{
- int i = FLASH_NUM_SECTORS - 1;
- while (i-- >= 0) {
- if (offset >= flash_sector_offsets[i] &&
- offset < flash_sector_offsets[i + 1]) {
- return i;
- }
- }
- return -1;
-}
-
-int _write_to_flash(uint32_t offset, const uint32_t *buf, uint32_t elements)
-{
- uint32_t sector = _flash_sector_num(offset);
- uint32_t SectorError = 0, i, j;
-
- if (offset == flash_sector_offsets[sector]) {
- /* Request to write to beginning of a flash sector, erase it first. */
- FLASH_EraseInitTypeDef FLASH_EraseInitStruct;
-
- FLASH_EraseInitStruct.TypeErase = TYPEERASE_SECTORS;
- FLASH_EraseInitStruct.Sector = sector;
- FLASH_EraseInitStruct.NbSectors = 1;
- FLASH_EraseInitStruct.VoltageRange = VOLTAGE_RANGE_3;
-
- if (HAL_FLASHEx_Erase(&FLASH_EraseInitStruct, &SectorError) != HAL_OK) {
- return -1;
- }
- }
-
- for (i = 0; i < elements; i++) {
- if ((j = HAL_FLASH_Program(FLASH_TYPEPROGRAM_WORD, offset, buf[i])) != HAL_OK) {
- return -2;
- }
- offset += 4;
- }
-
- return 1;
-}
-
-int cmd_dfu_upload(struct cli_def *cli, const char *command, char *argv[], int argc)
-{
- uint32_t filesize = 0, crc = 0, my_crc = 0, counter = 0;
- uint32_t offset = DFU_FIRMWARE_ADDR, n = DFU_UPLOAD_CHUNK_SIZE;
- uint32_t buf[DFU_UPLOAD_CHUNK_SIZE / 4];
-
- cli_print(cli, "OK, write DFU application file size (4 bytes), data in %i byte chunks, CRC-32 (4 bytes)",
- DFU_UPLOAD_CHUNK_SIZE);
-
- /* Read file size (4 bytes) */
- uart_receive_bytes(STM_UART_MGMT, (void *) &filesize, 4, 1000);
- cli_print(cli, "File size %li, will write it to 0x%lx", filesize, offset);
-
- HAL_FLASH_Unlock();
-
- while (filesize) {
- /* By initializing buf to the same value that erased flash has (0xff), we don't
- * have to try and be smart when writing the last page of data to the memory.
- */
- memset(buf, 0xffffffff, sizeof(buf));
-
- if (filesize < n) {
- n = filesize;
- }
-
- if (uart_receive_bytes(STM_UART_MGMT, (void *) &buf, n, 1000) != HAL_OK) {
- cli_print(cli, "Receive timed out");
- return CLI_ERROR;
- }
- filesize -= n;
-
- /* After reception of a chunk but before ACKing we have "all" the time in the world to
- * calculate CRC and write it to flash.
- */
- my_crc = update_crc(my_crc, (uint8_t *) buf, n);
- _write_to_flash(offset, buf, sizeof(buf) / 4);
- offset += DFU_UPLOAD_CHUNK_SIZE;
-
- /* ACK this chunk by sending the current chunk counter (4 bytes) */
- counter++;
- uart_send_bytes(STM_UART_MGMT, (void *) &counter, 4);
- }
+__IO uint32_t *dfu_firmware = &CRYPTECH_FIRMWARE_START;
+__IO uint32_t *dfu_firmware_end = &CRYPTECH_FIRMWARE_END;
+/* The first word in the firmware is an address to the stack (msp) */
+__IO uint32_t *dfu_msp_ptr = &CRYPTECH_FIRMWARE_START;
+/* The second word in the firmware is a pointer to the code
+ * (points at the Reset_Handler from the linker script).
+ */
+__IO uint32_t *dfu_code_ptr = &CRYPTECH_FIRMWARE_START + 1;
- HAL_FLASH_Lock();
- /* The sending side will now send it's calculated CRC-32 */
- cli_print(cli, "Send CRC-32");
- uart_receive_bytes(STM_UART_MGMT, (void *) &crc, 4, 1000);
- cli_print(cli, "CRC-32 %li", crc);
- if (crc == my_crc) {
- cli_print(cli, "CRC checksum MATCHED");
- } else {
- cli_print(cli, "CRC checksum did NOT match");
- }
-
- return CLI_OK;
-}
int cmd_dfu_dump(struct cli_def *cli, const char *command, char *argv[], int argc)
{
- cli_print(cli, "First 256 bytes from DFU application address %p:\r\n", DFU_FIRMWARE_PTR);
+ cli_print(cli, "First 256 bytes from DFU application address %p:\r\n", dfu_firmware);
- uart_send_hexdump(STM_UART_MGMT, (uint8_t *) DFU_FIRMWARE_ADDR, 0, 0xff);
+ uart_send_hexdump(STM_UART_MGMT, (uint8_t *) dfu_firmware, 0, 0xff);
uart_send_string2(STM_UART_MGMT, (char *) "\r\n\r\n");
return CLI_OK;
@@ -224,37 +67,18 @@ int cmd_dfu_dump(struct cli_def *cli, const char *command, char *argv[], int arg
int cmd_dfu_erase(struct cli_def *cli, const char *command, char *argv[], int argc)
{
- uint32_t start_sector = _flash_sector_num(DFU_FIRMWARE_ADDR);
- uint32_t end_sector = _flash_sector_num(DFU_FIRMWARE_END_ADDR);
- uint32_t sector;
+ int status;
- cli_print(cli, "Erasing flash sectors %li to %li (address %p to %p)",
- start_sector, end_sector,
- (uint32_t *) DFU_FIRMWARE_ADDR,
- (uint32_t *) DFU_FIRMWARE_END_ADDR);
+ cli_print(cli, "Erasing flash sectors %i to %i (address %p to %p) - expect the CLI to crash now",
+ stm_flash_sector_num((uint32_t) dfu_firmware),
+ stm_flash_sector_num((uint32_t) dfu_firmware_end),
+ dfu_firmware,
+ dfu_firmware_end);
- if (start_sector > end_sector) {
- cli_print(cli, "ERROR: Bad sectors");
- return CLI_ERROR;
+ if ((status = stm_flash_erase_sectors((uint32_t) dfu_firmware, (uint32_t) dfu_firmware_end)) != 0) {
+ cli_print(cli, "Failed erasing flash sectors (%i)", status);
}
- HAL_FLASH_Unlock();
-
- for (sector = start_sector; sector <= end_sector; sector++) {
- uint32_t SectorError = 0;
- FLASH_EraseInitTypeDef FLASH_EraseInitStruct;
-
- FLASH_EraseInitStruct.TypeErase = TYPEERASE_SECTORS;
- FLASH_EraseInitStruct.Sector = sector;
- FLASH_EraseInitStruct.NbSectors = 1;
- FLASH_EraseInitStruct.VoltageRange = VOLTAGE_RANGE_3;
-
- if (HAL_FLASHEx_Erase(&FLASH_EraseInitStruct, &SectorError) != HAL_OK) {
- cli_print(cli, "ERROR: Failed erasing sector %li", sector);
- }
- }
- HAL_FLASH_Lock();
-
return CLI_OK;
}
@@ -264,21 +88,23 @@ int cmd_dfu_jump(struct cli_def *cli, const char *command, char *argv[], int arg
/* Load first byte from the DFU_FIRMWARE_PTR to verify it contains an IVT before
* jumping there.
*/
- cli_print(cli, "Checking for application at %p", DFU_FIRMWARE_PTR);
+ cli_print(cli, "Checking for application at %p", dfu_firmware);
- //new_msp = (uint32_t) DFU_FIRMWARE_PTR;
- i = *dfu_new_msp & 0xFF000000;
+ i = *dfu_msp_ptr & 0xFF000000;
/* 'new_msp' is supposed to be a pointer to the new applications stack, it should
* point either at RAM (0x20000000) or at the CCM memory (0x10000000).
*/
if (i == 0x20000000 || i == 0x10000000) {
+ /* Set dfu_control to the magic value that will cause the us to jump to the
+ * firmware from the CLI main() function after rebooting.
+ */
*dfu_control = HARDWARE_EARLY_DFU_JUMP;
cli_print(cli, "Making the leap");
HAL_NVIC_SystemReset();
while (1) { ; }
} else {
cli_print(cli, "No loaded application found at %p (read 0x%x)",
- DFU_FIRMWARE_PTR, (unsigned int) *dfu_new_msp);
+ dfu_firmware, (unsigned int) *dfu_msp_ptr);
}
return CLI_OK;
@@ -288,8 +114,7 @@ void configure_cli_dfu(struct cli_def *cli)
{
cli_command_root(dfu);
- cli_command_node(dfu, dump, "Show the first 256 bytes of the loaded application");
- cli_command_node(dfu, jump, "Jump to the loaded application");
- cli_command_node(dfu, upload, "Load a new application");
- cli_command_node(dfu, erase, "Erase the application memory");
+ cli_command_node(dfu, dump, "Show the first 256 bytes of the loaded firmware");
+ cli_command_node(dfu, jump, "Jump to the loaded firmware");
+ cli_command_node(dfu, erase, "Erase the firmware memory (will crash the CLI)");
}
diff --git a/projects/cli-test/mgmt-dfu.h b/projects/cli-test/mgmt-dfu.h
index e1e3932..ac6589c 100644
--- a/projects/cli-test/mgmt-dfu.h
+++ b/projects/cli-test/mgmt-dfu.h
@@ -38,9 +38,22 @@
#include "stm-init.h"
#include <libcli.h>
-#define DFU_UPLOAD_CHUNK_SIZE 256
+/* symbols defined in the linker script (STM32F429BI.ld) */
+extern uint32_t CRYPTECH_FIRMWARE_START;
+extern uint32_t CRYPTECH_FIRMWARE_END;
+extern uint32_t CRYPTECH_DFU_CONTROL;
+
+#define DFU_FIRMWARE_ADDR ((uint32_t) &CRYPTECH_FIRMWARE_START)
+#define DFU_FIRMWARE_END_ADDR ((uint32_t) &CRYPTECH_FIRMWARE_END)
+#define DFU_UPLOAD_CHUNK_SIZE 256
+#define HARDWARE_EARLY_DFU_JUMP 0xBADABADA
+
+extern __IO uint32_t *dfu_control;
+extern __IO uint32_t *dfu_firmware;
+extern __IO uint32_t *dfu_msp_ptr;
+extern __IO uint32_t *dfu_code_ptr;
+
extern void configure_cli_dfu(struct cli_def *cli);
-extern void check_early_dfu_jump(void);
#endif /* __STM32_CLI_MGMT_DFU_H */
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 14:49:13 +0000