aboutsummaryrefslogtreecommitdiff
path: root/projects/cli-test
diff options
context:
space:
mode:
Diffstat (limited to 'projects/cli-test')
-rw-r--r--projects/cli-test/Makefile2
-rw-r--r--projects/cli-test/cli-test.c135
-rw-r--r--projects/cli-test/mgmt-fpga.c174
-rw-r--r--projects/cli-test/mgmt-fpga.h50
4 files changed, 226 insertions, 135 deletions
diff --git a/projects/cli-test/Makefile b/projects/cli-test/Makefile
index 39619fc..2ca61b9 100644
--- a/projects/cli-test/Makefile
+++ b/projects/cli-test/Makefile
@@ -1,6 +1,6 @@
TEST = cli-test
-OBJS = crc32.o mgmt-cli.o test_sdram.o mgmt-dfu.o
+OBJS = crc32.o mgmt-cli.o test_sdram.o mgmt-dfu.o mgmt-fpga.o
CFLAGS += -I$(LIBCLI_DIR)
LIBS += $(LIBCLI_DIR)/libcli.a
diff --git a/projects/cli-test/cli-test.c b/projects/cli-test/cli-test.c
index 84c268b..26ebbc2 100644
--- a/projects/cli-test/cli-test.c
+++ b/projects/cli-test/cli-test.c
@@ -40,6 +40,7 @@
#include "stm-sdram.h"
#include "mgmt-cli.h"
#include "mgmt-dfu.h"
+#include "mgmt-fpga.h"
#include "test_sdram.h"
#include <string.h>
@@ -157,124 +158,6 @@ int cmd_show_keystore_data(struct cli_def *cli, const char *command, char *argv[
return CLI_OK;
}
-/* The chunk size have to be a multiple of the SPI flash page size (256 bytes),
- and it has to match the chunk size in the program sending the bitstream over the UART.
-*/
-#define BITSTREAM_UPLOAD_CHUNK_SIZE 4096
-
-int cmd_fpga_bitstream_upload(struct cli_def *cli, const char *command, char *argv[], int argc)
-{
- uint32_t filesize = 0, crc = 0, my_crc = 0, counter = 0, i;
- uint32_t offset = 0, n = BITSTREAM_UPLOAD_CHUNK_SIZE;
- uint8_t buf[BITSTREAM_UPLOAD_CHUNK_SIZE];
-
- fpgacfg_access_control(ALLOW_ARM);
-
- cli_print(cli, "Checking if FPGA config memory is accessible");
- if (fpgacfg_check_id() != 1) {
- cli_print(cli, "ERROR: FPGA config memory not accessible. Check that jumpers JP7 and JP8 are installed.");
- return CLI_ERROR;
- }
-
- cli_print(cli, "OK, write FPGA bitstream file size (4 bytes), data in 4096 byte chunks, CRC-32 (4 bytes)");
-
- /* Read file size (4 bytes) */
- uart_receive_bytes(STM_UART_MGMT, (void *) &filesize, 4, 1000);
- cli_print(cli, "File size %li", filesize);
-
- while (filesize) {
- /* By initializing buf to the same value that erased flash has (0xff), we don't
- * have to try and be smart when writing the last page of data to the memory.
- */
- memset(buf, 0xff, sizeof(buf));
-
- if (filesize < n) {
- n = filesize;
- }
-
- if (uart_receive_bytes(STM_UART_MGMT, (void *) &buf, n, 1000) != HAL_OK) {
- cli_print(cli, "Receive timed out");
- return CLI_ERROR;
- }
- filesize -= n;
-
- /* After reception of 4 KB but before ACKing we have "all" the time in the world to
- * calculate CRC and write it to flash.
- */
- my_crc = update_crc(my_crc, buf, n);
-
- if ((i = fpgacfg_write_data(offset, buf, BITSTREAM_UPLOAD_CHUNK_SIZE)) != 1) {
- cli_print(cli, "Failed writing data at offset %li (counter = %li): %li", offset, counter, i);
- return CLI_ERROR;
- }
-
- offset += BITSTREAM_UPLOAD_CHUNK_SIZE;
-
- /* ACK this chunk by sending the current chunk counter (4 bytes) */
- counter++;
- uart_send_bytes(STM_UART_MGMT, (void *) &counter, 4);
- }
-
- /* The sending side will now send it's calculated CRC-32 */
- cli_print(cli, "Send CRC-32");
- uart_receive_bytes(STM_UART_MGMT, (void *) &crc, 4, 1000);
- cli_print(cli, "CRC-32 %li", crc);
- if (crc == my_crc) {
- cli_print(cli, "CRC checksum MATCHED");
- } else {
- cli_print(cli, "CRC checksum did NOT match");
- }
-
- fpgacfg_access_control(ALLOW_FPGA);
-
- return CLI_OK;
-}
-
-int cmd_fpga_bitstream_erase(struct cli_def *cli, const char *command, char *argv[], int argc)
-{
- fpgacfg_access_control(ALLOW_ARM);
-
- cli_print(cli, "Checking if FPGA config memory is accessible");
- if (fpgacfg_check_id() != 1) {
- cli_print(cli, "ERROR: FPGA config memory not accessible. Check that jumpers JP7 and JP8 are installed.");
- return CLI_ERROR;
- }
-
- /* Erasing the whole config memory takes a while, we just need to erase the first sector.
- * The bitstream has an EOF marker, so even if the next bitstream uploaded is shorter than
- * the current one there should be no problem.
- *
- * This command could be made to accept an argument indicating the whole memory should be erased.
- */
- if (! fpgacfg_erase_sectors(1)) {
- cli_print(cli, "Erasing first sector in FPGA config memory failed");
- return CLI_ERROR;
- }
-
- cli_print(cli, "Erased FPGA config memory");
- fpgacfg_access_control(ALLOW_FPGA);
-
- return CLI_OK;
-}
-
-int cmd_fpga_reset(struct cli_def *cli, const char *command, char *argv[], int argc)
-{
- fpgacfg_access_control(ALLOW_FPGA);
- fpgacfg_reset_fpga(RESET_FULL);
- cli_print(cli, "FPGA has been reset");
-
- return CLI_OK;
-}
-
-int cmd_fpga_reset_registers(struct cli_def *cli, const char *command, char *argv[], int argc)
-{
- fpgacfg_access_control(ALLOW_FPGA);
- fpgacfg_reset_fpga(RESET_REGISTERS);
- cli_print(cli, "FPGA registers have been reset");
-
- return CLI_OK;
-}
-
int cmd_reboot(struct cli_def *cli, const char *command, char *argv[], int argc)
{
cli_print(cli, "\n\n\nRebooting\n\n\n");
@@ -372,22 +255,6 @@ void configure_cli_show(struct cli_def *cli)
cli_command_node(show_keystore, data, "Show the first page of the keystore memory");
}
-void configure_cli_fpga(struct cli_def *cli)
-{
- /* fpga */
- cli_command_root(fpga);
- /* fpga reset */
- cli_command_node(fpga, reset, "Reset FPGA (config reset)");
- /* fpga reset registers */
- cli_command_node(fpga_reset, registers, "Reset FPGA registers (soft reset)");
-
- cli_command_branch(fpga, bitstream);
- /* fpga bitstream upload */
- cli_command_node(fpga_bitstream, upload, "Upload new FPGA bitstream");
- /* fpga bitstream erase */
- cli_command_node(fpga_bitstream, erase, "Erase FPGA config memory");
-}
-
void configure_cli_test(struct cli_def *cli)
{
/* test */
diff --git a/projects/cli-test/mgmt-fpga.c b/projects/cli-test/mgmt-fpga.c
new file mode 100644
index 0000000..c20b7b2
--- /dev/null
+++ b/projects/cli-test/mgmt-fpga.c
@@ -0,0 +1,174 @@
+/*
+ * mgmt-fpga.c
+ * -----------
+ * CLI code to manage the FPGA configuration etc.
+ *
+ * Copyright (c) 2016, NORDUnet A/S All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * - Neither the name of the NORDUnet nor the names of its contributors may
+ * be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include "stm-init.h"
+#include "stm-uart.h"
+#include "stm-fpgacfg.h"
+#include "mgmt-cli.h"
+#include "mgmt-fpga.h"
+
+#include <string.h>
+
+
+extern uint32_t update_crc(uint32_t crc, uint8_t *buf, int len);
+
+
+int cmd_fpga_bitstream_upload(struct cli_def *cli, const char *command, char *argv[], int argc)
+{
+ uint32_t filesize = 0, crc = 0, my_crc = 0, counter = 0, i;
+ uint32_t offset = 0, n = BITSTREAM_UPLOAD_CHUNK_SIZE;
+ uint8_t buf[BITSTREAM_UPLOAD_CHUNK_SIZE];
+
+ fpgacfg_access_control(ALLOW_ARM);
+
+ cli_print(cli, "Checking if FPGA config memory is accessible");
+ if (fpgacfg_check_id() != 1) {
+ cli_print(cli, "ERROR: FPGA config memory not accessible. Check that jumpers JP7 and JP8 are installed.");
+ return CLI_ERROR;
+ }
+
+ cli_print(cli, "OK, write FPGA bitstream file size (4 bytes), data in 4096 byte chunks, CRC-32 (4 bytes)");
+
+ /* Read file size (4 bytes) */
+ uart_receive_bytes(STM_UART_MGMT, (void *) &filesize, 4, 1000);
+ cli_print(cli, "File size %li", filesize);
+
+ while (filesize) {
+ /* By initializing buf to the same value that erased flash has (0xff), we don't
+ * have to try and be smart when writing the last page of data to the memory.
+ */
+ memset(buf, 0xff, sizeof(buf));
+
+ if (filesize < n) {
+ n = filesize;
+ }
+
+ if (uart_receive_bytes(STM_UART_MGMT, (void *) &buf, n, 1000) != HAL_OK) {
+ cli_print(cli, "Receive timed out");
+ return CLI_ERROR;
+ }
+ filesize -= n;
+
+ /* After reception of 4 KB but before ACKing we have "all" the time in the world to
+ * calculate CRC and write it to flash.
+ */
+ my_crc = update_crc(my_crc, buf, n);
+
+ if ((i = fpgacfg_write_data(offset, buf, BITSTREAM_UPLOAD_CHUNK_SIZE)) != 1) {
+ cli_print(cli, "Failed writing data at offset %li (counter = %li): %li", offset, counter, i);
+ return CLI_ERROR;
+ }
+
+ offset += BITSTREAM_UPLOAD_CHUNK_SIZE;
+
+ /* ACK this chunk by sending the current chunk counter (4 bytes) */
+ counter++;
+ uart_send_bytes(STM_UART_MGMT, (void *) &counter, 4);
+ }
+
+ /* The sending side will now send it's calculated CRC-32 */
+ cli_print(cli, "Send CRC-32");
+ uart_receive_bytes(STM_UART_MGMT, (void *) &crc, 4, 1000);
+ cli_print(cli, "CRC-32 %li", crc);
+ if (crc == my_crc) {
+ cli_print(cli, "CRC checksum MATCHED");
+ } else {
+ cli_print(cli, "CRC checksum did NOT match");
+ }
+
+ fpgacfg_access_control(ALLOW_FPGA);
+
+ return CLI_OK;
+}
+
+int cmd_fpga_bitstream_erase(struct cli_def *cli, const char *command, char *argv[], int argc)
+{
+ fpgacfg_access_control(ALLOW_ARM);
+
+ cli_print(cli, "Checking if FPGA config memory is accessible");
+ if (fpgacfg_check_id() != 1) {
+ cli_print(cli, "ERROR: FPGA config memory not accessible. Check that jumpers JP7 and JP8 are installed.");
+ return CLI_ERROR;
+ }
+
+ /* Erasing the whole config memory takes a while, we just need to erase the first sector.
+ * The bitstream has an EOF marker, so even if the next bitstream uploaded is shorter than
+ * the current one there should be no problem.
+ *
+ * This command could be made to accept an argument indicating the whole memory should be erased.
+ */
+ if (! fpgacfg_erase_sectors(1)) {
+ cli_print(cli, "Erasing first sector in FPGA config memory failed");
+ return CLI_ERROR;
+ }
+
+ cli_print(cli, "Erased FPGA config memory");
+ fpgacfg_access_control(ALLOW_FPGA);
+
+ return CLI_OK;
+}
+
+int cmd_fpga_reset(struct cli_def *cli, const char *command, char *argv[], int argc)
+{
+ fpgacfg_access_control(ALLOW_FPGA);
+ fpgacfg_reset_fpga(RESET_FULL);
+ cli_print(cli, "FPGA has been reset");
+
+ return CLI_OK;
+}
+
+int cmd_fpga_reset_registers(struct cli_def *cli, const char *command, char *argv[], int argc)
+{
+ fpgacfg_access_control(ALLOW_FPGA);
+ fpgacfg_reset_fpga(RESET_REGISTERS);
+ cli_print(cli, "FPGA registers have been reset");
+
+ return CLI_OK;
+}
+
+void configure_cli_fpga(struct cli_def *cli)
+{
+ /* fpga */
+ cli_command_root(fpga);
+ /* fpga reset */
+ cli_command_node(fpga, reset, "Reset FPGA (config reset)");
+ /* fpga reset registers */
+ cli_command_node(fpga_reset, registers, "Reset FPGA registers (soft reset)");
+
+ cli_command_branch(fpga, bitstream);
+ /* fpga bitstream upload */
+ cli_command_node(fpga_bitstream, upload, "Upload new FPGA bitstream");
+ /* fpga bitstream erase */
+ cli_command_node(fpga_bitstream, erase, "Erase FPGA config memory");
+}
diff --git a/projects/cli-test/mgmt-fpga.h b/projects/cli-test/mgmt-fpga.h
new file mode 100644
index 0000000..ce185de
--- /dev/null
+++ b/projects/cli-test/mgmt-fpga.h
@@ -0,0 +1,50 @@
+/*
+ * mgmt-fpga.h
+ * -----------
+ * Management FPGA related code.
+ *
+ * Copyright (c) 2016, NORDUnet A/S All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * - Neither the name of the NORDUnet nor the names of its contributors may
+ * be used to endorse or promote products derived from this software
+ * without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
+ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+ * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __STM32_CLI_MGMT_FPGA_H
+#define __STM32_CLI_MGMT_FPGA_H
+
+#include "stm-init.h"
+#include <libcli.h>
+
+
+/* The chunk size have to be a multiple of the SPI flash page size (256 bytes),
+ and it has to match the chunk size in the program sending the bitstream over the UART.
+*/
+#define BITSTREAM_UPLOAD_CHUNK_SIZE 4096
+
+
+extern void configure_cli_fpga(struct cli_def *cli);
+
+#endif /* __STM32_CLI_MGMT_FPGA_H */