diff options
Diffstat (limited to 'projects/bootloader')
| -rw-r--r-- | projects/bootloader/Makefile | 4 | ||||
| -rw-r--r-- | projects/bootloader/stm32f4xx_it.c | 220 |
2 files changed, 1 insertions, 223 deletions
diff --git a/projects/bootloader/Makefile b/projects/bootloader/Makefile index fe75849..a63d29c 100644 --- a/projects/bootloader/Makefile +++ b/projects/bootloader/Makefile @@ -10,9 +10,7 @@ BOARD_OBJS = \ $(BOARD_DIR)/system_stm32f4xx.o \ $(BOARD_DIR)/stm32f4xx_hal_msp.o \ ./startup_stm32f429xx.o \ - ./stm32f4xx_it.o - -LIBS = $(MBED_DIR)/libstmf4.a + $(BOARD_DIR)/stm32f4xx_it.o all: $(PROG:=.elf) diff --git a/projects/bootloader/stm32f4xx_it.c b/projects/bootloader/stm32f4xx_it.c deleted file mode 100644 index 7aed16b..0000000 --- a/projects/bootloader/stm32f4xx_it.c +++ /dev/null @@ -1,220 +0,0 @@ -/** -****************************************************************************** -* @file GPIO/GPIO_IOToggle/Src/stm32f4xx_it.c -* @author MCD Application Team -* @version V1.0.1 -* @date 26-February-2014 -* @brief Main Interrupt Service Routines. -* This file provides template for all exceptions handler and -* peripherals interrupt service routine. -****************************************************************************** -* @attention -* -* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> -* -* Redistribution and use in source and binary forms, with or without modification, -* are permitted provided that the following conditions are met: -* 1. Redistributions of source code must retain the above copyright notice, -* this list of conditions and the following disclaimer. -* 2. Redistributions in binary form must reproduce the above copyright notice, -* this list of conditions and the following disclaimer in the documentation -* and/or other materials provided with the distribution. -* 3. Neither the name of STMicroelectronics nor the names of its contributors -* may be used to endorse or promote products derived from this software -* without specific prior written permission. -* -* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" -* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE -* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE -* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE -* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL -* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR -* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER -* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, -* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE -* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. -* -****************************************************************************** -*/ - -#include "stm-init.h" -#include "stm-uart.h" - -/******************************************************************************/ -/* Cortex-M4 Processor Exceptions Handlers */ -/******************************************************************************/ - -/* - * We define these to make debugging easier, because otherwise gdb reports - * HardFault_Handler as WWDG_IRQHandler. - */ - -/** - * @brief This function handles NMI exception. - * @param None - * @retval None - */ -void NMI_Handler(void) -{ -} - -/** - * @brief This function handles Hard Fault exception. - * @param None - * @retval None - */ -void HardFault_Handler(void) -{ - /* Go to infinite loop when Hard Fault exception occurs */ - while (1) { ; } -} - -/** - * @brief This function handles Memory Manage exception. - * @param None - * @retval None - */ -void MemManage_Handler(void) -{ - /* Go to infinite loop when Memory Manage exception occurs */ - while (1) { ; } -} - -/** - * @brief This function handles Bus Fault exception. - * @param None - * @retval None - */ -void BusFault_Handler(void) -{ - /* Go to infinite loop when Bus Fault exception occurs */ - while (1) { ; } -} - -/** - * @brief This function handles Usage Fault exception. - * @param None - * @retval None - */ -void UsageFault_Handler(void) -{ - /* Go to infinite loop when Usage Fault exception occurs */ - while (1) { ; } -} - - -/** - * @brief This function handles SVCall exception. - * @param None - * @retval None - */ -void SVC_Handler(void) -{ -} - -/** - * @brief This function handles Debug Monitor exception. - * @param None - * @retval None - */ -void DebugMon_Handler(void) -{ -} - -/** - * @brief This function handles PendSVC exception. - * @param None - * @retval None - */ -void PendSV_Handler(void) -{ -} - -/** - * @brief This function handles SysTick Handler. - * @param None - * @retval None - */ -void SysTick_Handler(void) -{ - HAL_IncTick(); -} - -/******************************************************************************/ -/* STM32F4xx Peripherals Interrupt Handlers */ -/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */ -/* available peripheral interrupt handler's name please refer to the startup */ -/* file (startup_stm32f4xx.s). */ -/******************************************************************************/ - -/** -* @brief This function handles DMA1 stream5 global interrupt. -*/ -void DMA1_Stream5_IRQHandler(void) -{ - HAL_DMA_IRQHandler(&hdma_usart_user_rx); -} - -/** -* @brief This function handles DMA2 stream2 global interrupt. -*/ -void DMA2_Stream2_IRQHandler(void) -{ - HAL_DMA_IRQHandler(&hdma_usart_mgmt_rx); -} - -/** - * @brief This function handles UART interrupt request. - * @param None - * @retval None - * @Note HAL_UART_IRQHandler will call HAL_UART_RxCpltCallback in main.c. - */ -void USART1_IRQHandler(void) -{ - HAL_UART_IRQHandler(&huart_mgmt); -} - -/** - * @brief This function handles UART interrupt request. - * @param None - * @retval None - * @Note HAL_UART_IRQHandler will call HAL_UART_RxCpltCallback in main.c. - */ -void USART2_IRQHandler(void) -{ - HAL_UART_IRQHandler(&huart_user); -} - -void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) -{ - extern void HAL_UART1_RxCpltCallback(UART_HandleTypeDef *huart); - extern void HAL_UART2_RxCpltCallback(UART_HandleTypeDef *huart); - - if (huart->Instance == USART1) - HAL_UART1_RxCpltCallback(huart); - - else if (huart->Instance == USART2) - HAL_UART2_RxCpltCallback(huart); -} - -/** - * @brief Rx Transfer completed callbacks. - * @param huart: pointer to a UART_HandleTypeDef structure that contains - * the configuration information for the specified UART module. - * @retval None - */ -__weak void HAL_UART1_RxCpltCallback(UART_HandleTypeDef *huart) -{ - /* NOTE: This function Should not be modified, when the callback is needed, - the HAL_UART_TxCpltCallback could be implemented in the user file - */ -} - -__weak void HAL_UART2_RxCpltCallback(UART_HandleTypeDef *huart) -{ - /* NOTE: This function Should not be modified, when the callback is needed, - the HAL_UART_TxCpltCallback could be implemented in the user file - */ -} - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |