aboutsummaryrefslogtreecommitdiff
path: root/libraries/mbed
diff options
context:
space:
mode:
Diffstat (limited to 'libraries/mbed')
-rw-r--r--libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_hal_msp.c59
-rw-r--r--libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_it.c186
2 files changed, 242 insertions, 3 deletions
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_hal_msp.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_hal_msp.c
index 2a207b6..91a6f46 100644
--- a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_hal_msp.c
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_hal_msp.c
@@ -33,10 +33,8 @@
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
+#include "stm-uart.h"
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
/**
* Initializes the Global MSP.
@@ -121,6 +119,8 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
GPIO_InitTypeDef GPIO_InitStruct;
if (huart->Instance == USART1) {
+ /* This is huart_mgmt (USER_MGMT) */
+
/* Peripheral clock enable */
__USART1_CLK_ENABLE();
__GPIOA_CLK_ENABLE();
@@ -138,7 +138,32 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
HAL_NVIC_SetPriority(USART1_IRQn, 0, 1);
HAL_NVIC_EnableIRQ(USART1_IRQn);
+
+ /* Peripheral DMA init*/
+ hdma_usart_mgmt_rx.Instance = DMA2_Stream2;
+ hdma_usart_mgmt_rx.Init.Channel = DMA_CHANNEL_4;
+ hdma_usart_mgmt_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
+ hdma_usart_mgmt_rx.Init.PeriphInc = DMA_PINC_DISABLE;
+ hdma_usart_mgmt_rx.Init.MemInc = DMA_MINC_ENABLE;
+ hdma_usart_mgmt_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
+ hdma_usart_mgmt_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
+ hdma_usart_mgmt_rx.Init.Mode = DMA_CIRCULAR;
+ hdma_usart_mgmt_rx.Init.Priority = DMA_PRIORITY_LOW;
+ hdma_usart_mgmt_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
+ /*
+ hdma_usart_mgmt_rx.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_HALFFULL;
+ hdma_usart_mgmt_rx.Init.MemBurst = DMA_MBURST_SINGLE;
+ hdma_usart_mgmt_rx.Init.PeriphBurst = DMA_PBURST_SINGLE;
+ */
+ if (HAL_DMA_Init(&hdma_usart_mgmt_rx) != HAL_OK) {
+ Error_Handler();
+ }
+
+ __HAL_LINKDMA(huart, hdmarx, hdma_usart_mgmt_rx);
+
} else if (huart->Instance == USART2) {
+ /* This is huart_user (USER UART) */
+
/* Peripheral clock enable */
__USART2_CLK_ENABLE();
__GPIOA_CLK_ENABLE();
@@ -156,6 +181,28 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
HAL_NVIC_SetPriority(USART2_IRQn, 0, 1);
HAL_NVIC_EnableIRQ(USART2_IRQn);
+
+ /* Peripheral DMA init*/
+ hdma_usart_user_rx.Instance = DMA1_Stream5;
+ hdma_usart_user_rx.Init.Channel = DMA_CHANNEL_4;
+ hdma_usart_user_rx.Init.Direction = DMA_PERIPH_TO_MEMORY;
+ hdma_usart_user_rx.Init.PeriphInc = DMA_PINC_DISABLE;
+ hdma_usart_user_rx.Init.MemInc = DMA_MINC_ENABLE;
+ hdma_usart_user_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE;
+ hdma_usart_user_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE;
+ hdma_usart_user_rx.Init.Mode = DMA_CIRCULAR;
+ hdma_usart_user_rx.Init.Priority = DMA_PRIORITY_LOW;
+ hdma_usart_user_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE;
+ /*
+ hdma_usart_user_rx.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_HALFFULL;
+ hdma_usart_user_rx.Init.MemBurst = DMA_MBURST_SINGLE;
+ hdma_usart_user_rx.Init.PeriphBurst = DMA_PBURST_SINGLE;
+ */
+ if (HAL_DMA_Init(&hdma_usart_user_rx) != HAL_OK) {
+ Error_Handler();
+ }
+
+ __HAL_LINKDMA(huart, hdmarx, hdma_usart_user_rx);
}
}
@@ -172,6 +219,9 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2 | GPIO_PIN_3);
HAL_NVIC_DisableIRQ(USART1_IRQn);
+
+ /* Peripheral DMA DeInit*/
+ HAL_DMA_DeInit(huart->hdmarx);
} else if (huart->Instance == USART2) {
/* Peripheral clock disable */
__USART2_CLK_DISABLE();
@@ -183,6 +233,9 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9 | GPIO_PIN_10);
HAL_NVIC_DisableIRQ(USART2_IRQn);
+
+ /* Peripheral DMA DeInit*/
+ HAL_DMA_DeInit(huart->hdmarx);
}
}
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_it.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_it.c
new file mode 100644
index 0000000..b3de408
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_it.c
@@ -0,0 +1,186 @@
+/**
+******************************************************************************
+* @file GPIO/GPIO_IOToggle/Src/stm32f4xx_it.c
+* @author MCD Application Team
+* @version V1.0.1
+* @date 26-February-2014
+* @brief Main Interrupt Service Routines.
+* This file provides template for all exceptions handler and
+* peripherals interrupt service routine.
+******************************************************************************
+* @attention
+*
+* <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+*
+* Redistribution and use in source and binary forms, with or without modification,
+* are permitted provided that the following conditions are met:
+* 1. Redistributions of source code must retain the above copyright notice,
+* this list of conditions and the following disclaimer.
+* 2. Redistributions in binary form must reproduce the above copyright notice,
+* this list of conditions and the following disclaimer in the documentation
+* and/or other materials provided with the distribution.
+* 3. Neither the name of STMicroelectronics nor the names of its contributors
+* may be used to endorse or promote products derived from this software
+* without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+******************************************************************************
+*/
+
+#include "stm-init.h"
+#include "stm-uart.h"
+
+/******************************************************************************/
+/* Cortex-M4 Processor Exceptions Handlers */
+/******************************************************************************/
+
+/**
+ * @brief This function handles NMI exception.
+ * @param None
+ * @retval None
+ */
+void NMI_Handler(void)
+{
+}
+
+/**
+ * @brief This function handles Hard Fault exception.
+ * @param None
+ * @retval None
+ */
+void HardFault_Handler(void)
+{
+ /* Go to infinite loop when Hard Fault exception occurs */
+ while (1) { ; }
+}
+
+/**
+ * @brief This function handles Memory Manage exception.
+ * @param None
+ * @retval None
+ */
+void MemManage_Handler(void)
+{
+ /* Go to infinite loop when Memory Manage exception occurs */
+ while (1) { ; }
+}
+
+/**
+ * @brief This function handles Bus Fault exception.
+ * @param None
+ * @retval None
+ */
+void BusFault_Handler(void)
+{
+ /* Go to infinite loop when Bus Fault exception occurs */
+ while (1) { ; }
+}
+
+/**
+ * @brief This function handles Usage Fault exception.
+ * @param None
+ * @retval None
+ */
+void UsageFault_Handler(void)
+{
+ /* Go to infinite loop when Usage Fault exception occurs */
+ while (1) { ; }
+}
+
+
+#if 0 /* already defined in libraries/mbed/rtos/ */
+/**
+ * @brief This function handles SVCall exception.
+ * @param None
+ * @retval None
+ */
+void SVC_Handler(void)
+{
+}
+
+/**
+ * @brief This function handles Debug Monitor exception.
+ * @param None
+ * @retval None
+ */
+void DebugMon_Handler(void)
+{
+}
+
+/**
+ * @brief This function handles PendSVC exception.
+ * @param None
+ * @retval None
+ */
+void PendSV_Handler(void)
+{
+}
+
+/**
+ * @brief This function handles SysTick Handler.
+ * @param None
+ * @retval None
+ */
+void SysTick_Handler(void)
+{
+ HAL_IncTick();
+}
+#endif
+
+/******************************************************************************/
+/* STM32F4xx Peripherals Interrupt Handlers */
+/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */
+/* available peripheral interrupt handler's name please refer to the startup */
+/* file (startup_stm32f4xx.s). */
+/******************************************************************************/
+
+/**
+ * @brief This function handles UART interrupt request.
+ * @param None
+ * @retval None
+ * @Note HAL_UART_IRQHandler will call HAL_UART_TxCpltCallback in main.c.
+ */
+void USART1_IRQHandler(void)
+{
+ HAL_UART_IRQHandler(&huart_mgmt);
+}
+
+/**
+ * @brief This function handles UART interrupt request.
+ * @param None
+ * @retval None
+ * @Note HAL_UART_IRQHandler will call HAL_UART_TxCpltCallback in main.c.
+ */
+void USART2_IRQHandler(void)
+{
+ HAL_UART_IRQHandler(&huart_user);
+}
+
+/**
+* @brief This function handles DMA1 stream5 global interrupt.
+*/
+void DMA1_Stream5_IRQHandler(void)
+{
+ HAL_DMA_IRQHandler(&hdma_usart_user_rx);
+}
+
+/**
+* @brief This function handles DMA2 stream2 global interrupt.
+*/
+void DMA2_Stream2_IRQHandler(void)
+{
+ HAL_DMA_IRQHandler(&hdma_usart_mgmt_rx);
+}
+
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/