diff options
Diffstat (limited to 'libraries/mbed/targets')
2 files changed, 73 insertions, 3 deletions
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_hal_msp.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_hal_msp.c index 2a207b6..91a6f46 100644 --- a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_hal_msp.c +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_hal_msp.c @@ -33,10 +33,8 @@ */ /* Includes ------------------------------------------------------------------*/ #include "stm32f4xx_hal.h" +#include "stm-uart.h" -/* USER CODE BEGIN 0 */ - -/* USER CODE END 0 */ /** * Initializes the Global MSP. @@ -121,6 +119,8 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart) GPIO_InitTypeDef GPIO_InitStruct; if (huart->Instance == USART1) { + /* This is huart_mgmt (USER_MGMT) */ + /* Peripheral clock enable */ __USART1_CLK_ENABLE(); __GPIOA_CLK_ENABLE(); @@ -138,7 +138,32 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart) HAL_NVIC_SetPriority(USART1_IRQn, 0, 1); HAL_NVIC_EnableIRQ(USART1_IRQn); + + /* Peripheral DMA init*/ + hdma_usart_mgmt_rx.Instance = DMA2_Stream2; + hdma_usart_mgmt_rx.Init.Channel = DMA_CHANNEL_4; + hdma_usart_mgmt_rx.Init.Direction = DMA_PERIPH_TO_MEMORY; + hdma_usart_mgmt_rx.Init.PeriphInc = DMA_PINC_DISABLE; + hdma_usart_mgmt_rx.Init.MemInc = DMA_MINC_ENABLE; + hdma_usart_mgmt_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE; + hdma_usart_mgmt_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE; + hdma_usart_mgmt_rx.Init.Mode = DMA_CIRCULAR; + hdma_usart_mgmt_rx.Init.Priority = DMA_PRIORITY_LOW; + hdma_usart_mgmt_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE; + /* + hdma_usart_mgmt_rx.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_HALFFULL; + hdma_usart_mgmt_rx.Init.MemBurst = DMA_MBURST_SINGLE; + hdma_usart_mgmt_rx.Init.PeriphBurst = DMA_PBURST_SINGLE; + */ + if (HAL_DMA_Init(&hdma_usart_mgmt_rx) != HAL_OK) { + Error_Handler(); + } + + __HAL_LINKDMA(huart, hdmarx, hdma_usart_mgmt_rx); + } else if (huart->Instance == USART2) { + /* This is huart_user (USER UART) */ + /* Peripheral clock enable */ __USART2_CLK_ENABLE(); __GPIOA_CLK_ENABLE(); @@ -156,6 +181,28 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart) HAL_NVIC_SetPriority(USART2_IRQn, 0, 1); HAL_NVIC_EnableIRQ(USART2_IRQn); + + /* Peripheral DMA init*/ + hdma_usart_user_rx.Instance = DMA1_Stream5; + hdma_usart_user_rx.Init.Channel = DMA_CHANNEL_4; + hdma_usart_user_rx.Init.Direction = DMA_PERIPH_TO_MEMORY; + hdma_usart_user_rx.Init.PeriphInc = DMA_PINC_DISABLE; + hdma_usart_user_rx.Init.MemInc = DMA_MINC_ENABLE; + hdma_usart_user_rx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE; + hdma_usart_user_rx.Init.MemDataAlignment = DMA_MDATAALIGN_BYTE; + hdma_usart_user_rx.Init.Mode = DMA_CIRCULAR; + hdma_usart_user_rx.Init.Priority = DMA_PRIORITY_LOW; + hdma_usart_user_rx.Init.FIFOMode = DMA_FIFOMODE_DISABLE; + /* + hdma_usart_user_rx.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_HALFFULL; + hdma_usart_user_rx.Init.MemBurst = DMA_MBURST_SINGLE; + hdma_usart_user_rx.Init.PeriphBurst = DMA_PBURST_SINGLE; + */ + if (HAL_DMA_Init(&hdma_usart_user_rx) != HAL_OK) { + Error_Handler(); + } + + __HAL_LINKDMA(huart, hdmarx, hdma_usart_user_rx); } } @@ -172,6 +219,9 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2 | GPIO_PIN_3); HAL_NVIC_DisableIRQ(USART1_IRQn); + + /* Peripheral DMA DeInit*/ + HAL_DMA_DeInit(huart->hdmarx); } else if (huart->Instance == USART2) { /* Peripheral clock disable */ __USART2_CLK_DISABLE(); @@ -183,6 +233,9 @@ void HAL_UART_MspDeInit(UART_HandleTypeDef* huart) HAL_GPIO_DeInit(GPIOA, GPIO_PIN_9 | GPIO_PIN_10); HAL_NVIC_DisableIRQ(USART2_IRQn); + + /* Peripheral DMA DeInit*/ + HAL_DMA_DeInit(huart->hdmarx); } } diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_it.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_it.c index a174d73..b3de408 100644 --- a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_it.c +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_it.c @@ -166,4 +166,21 @@ void USART2_IRQHandler(void) HAL_UART_IRQHandler(&huart_user); } +/** +* @brief This function handles DMA1 stream5 global interrupt. +*/ +void DMA1_Stream5_IRQHandler(void) +{ + HAL_DMA_IRQHandler(&hdma_usart_user_rx); +} + +/** +* @brief This function handles DMA2 stream2 global interrupt. +*/ +void DMA2_Stream2_IRQHandler(void) +{ + HAL_DMA_IRQHandler(&hdma_usart_mgmt_rx); +} + + /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |