diff options
Diffstat (limited to 'libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_it_rtos.c')
| -rw-r--r-- | libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_it_rtos.c | 233 |
1 files changed, 233 insertions, 0 deletions
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_it_rtos.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_it_rtos.c new file mode 100644 index 0000000..1118db2 --- /dev/null +++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_it_rtos.c @@ -0,0 +1,233 @@ +/** +****************************************************************************** +* @file GPIO/GPIO_IOToggle/Src/stm32f4xx_it.c +* @author MCD Application Team +* @version V1.0.1 +* @date 26-February-2014 +* @brief Main Interrupt Service Routines. +* This file provides template for all exceptions handler and +* peripherals interrupt service routine. +****************************************************************************** +* @attention +* +* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> +* +* Redistribution and use in source and binary forms, with or without modification, +* are permitted provided that the following conditions are met: +* 1. Redistributions of source code must retain the above copyright notice, +* this list of conditions and the following disclaimer. +* 2. Redistributions in binary form must reproduce the above copyright notice, +* this list of conditions and the following disclaimer in the documentation +* and/or other materials provided with the distribution. +* 3. Neither the name of STMicroelectronics nor the names of its contributors +* may be used to endorse or promote products derived from this software +* without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +****************************************************************************** +*/ + +#include "cmsis_os.h" + +#include "stm-init.h" +#include "stm-uart.h" + +/******************************************************************************/ +/* Cortex-M4 Processor Exceptions Handlers */ +/******************************************************************************/ + +/* + * We define these to make debugging easier, because otherwise gdb reports + * HardFault_Handler as WWDG_IRQHandler. + */ + +/** + * @brief This function handles NMI exception. + * @param None + * @retval None + */ +void NMI_Handler(void) +{ +} + +/** + * @brief This function handles Hard Fault exception. + * @param None + * @retval None + */ +void HardFault_Handler(void) +{ +#ifdef HAL_GPIO_MODULE_ENABLED + //HAL_GPIO_WritePin(LED_PORT, LED_RED, GPIO_PIN_SET); + HAL_GPIO_WritePin(GPIOK, GPIO_PIN_7, GPIO_PIN_SET); +#endif + /* Go to infinite loop when Hard Fault exception occurs */ + while (1) { ; } +} + +/** + * @brief This function handles Memory Manage exception. + * @param None + * @retval None + */ +void MemManage_Handler(void) +{ + /* Go to infinite loop when Memory Manage exception occurs */ + while (1) { ; } +} + +/** + * @brief This function handles Bus Fault exception. + * @param None + * @retval None + */ +void BusFault_Handler(void) +{ + /* Go to infinite loop when Bus Fault exception occurs */ + while (1) { ; } +} + +/** + * @brief This function handles Usage Fault exception. + * @param None + * @retval None + */ +void UsageFault_Handler(void) +{ + /* Go to infinite loop when Usage Fault exception occurs */ + while (1) { ; } +} + + +#if 0 /* already defined in libraries/mbed/rtos/ */ +/** + * @brief This function handles SVCall exception. + * @param None + * @retval None + */ +void SVC_Handler(void) +{ +} + +/** + * @brief This function handles Debug Monitor exception. + * @param None + * @retval None + */ +void DebugMon_Handler(void) +{ +} + +/** + * @brief This function handles PendSVC exception. + * @param None + * @retval None + */ +void PendSV_Handler(void) +{ +} + +/** + * @brief This function handles SysTick Handler. + * @param None + * @retval None + */ +void SysTick_Handler(void) +{ + HAL_IncTick(); +} +#endif + +/******************************************************************************/ +/* STM32F4xx Peripherals Interrupt Handlers */ +/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */ +/* available peripheral interrupt handler's name please refer to the startup */ +/* file (startup_stm32f4xx.s). */ +/******************************************************************************/ + +/** +* @brief This function handles DMA1 stream5 global interrupt. +*/ +void DMA1_Stream5_IRQHandler(void) +{ + HAL_DMA_IRQHandler(&hdma_usart_user_rx); +} + +/** +* @brief This function handles DMA2 stream2 global interrupt. +*/ +void DMA2_Stream2_IRQHandler(void) +{ + HAL_DMA_IRQHandler(&hdma_usart_mgmt_rx); +} + +/** + * @brief This function handles UART interrupt request. + * @param None + * @retval None + * @Note HAL_UART_IRQHandler will call HAL_UART_RxCpltCallback in main.c. + */ +void USART1_IRQHandler(void) +{ + HAL_UART_IRQHandler(&huart_mgmt); +} + +/** + * @brief This function handles UART interrupt request. + * @param None + * @retval None + * @Note HAL_UART_IRQHandler will call HAL_UART_RxCpltCallback below. + */ +void USART2_IRQHandler(void) +{ + HAL_UART_IRQHandler(&huart_user); +} + +void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) +{ + extern void HAL_UART1_RxCpltCallback(UART_HandleTypeDef *huart); + extern void HAL_UART2_RxCpltCallback(UART_HandleTypeDef *huart); + + if (huart->Instance == USART1) + HAL_UART1_RxCpltCallback(huart); + + else if (huart->Instance == USART2) + HAL_UART2_RxCpltCallback(huart); +} + +/** + * @brief Rx Transfer completed callbacks. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +__weak void HAL_UART1_RxCpltCallback(UART_HandleTypeDef *huart) +{ + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_UART_RxCpltCallback could be implemented in the user file + */ +} + +__weak void HAL_UART2_RxCpltCallback(UART_HandleTypeDef *huart) +{ + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_UART_TxCpltCallback could be implemented in the user file + */ +} + +void HAL_Delay(__IO uint32_t Delay) +{ + osDelay(Delay); +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |