aboutsummaryrefslogtreecommitdiff
path: root/Drivers/STM32F4xx_HAL_Driver/Src
diff options
context:
space:
mode:
Diffstat (limited to 'Drivers/STM32F4xx_HAL_Driver/Src')
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c531
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c1412
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c872
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_can.c1438
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cec.c1112
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c436
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_crc.c342
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp.c3813
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp_ex.c3043
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac.c953
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac_ex.c382
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi.c830
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi_ex.c212
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c928
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma2d.c1266
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c307
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_eth.c2017
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c761
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c1316
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c194
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c.c4098
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c_ex.c326
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c545
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash.c1862
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash_ex.c1642
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hcd.c1215
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c3649
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c204
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c1408
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s_ex.c1479
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_irda.c1504
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_iwdg.c361
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_ltdc.c1191
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_msp_template.c119
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c1125
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nor.c1007
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pccard.c742
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c1208
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c198
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c574
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c624
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_qspi.c1942
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c1234
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c1676
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c515
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc.c1545
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc_ex.c1710
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai.c1908
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai_ex.c269
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c3488
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sdram.c842
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_smartcard.c1303
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spdifrx.c1210
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c2298
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c682
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c5335
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c1864
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c1932
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_usart.c1857
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_wwdg.c454
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmc.c1733
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c955
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c505
-rw-r--r--Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c1705
64 files changed, 0 insertions, 84208 deletions
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c
deleted file mode 100644
index 2649228..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c
+++ /dev/null
@@ -1,531 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief HAL module driver.
- * This is the common part of the HAL initialization
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- The common HAL driver contains a set of generic and common APIs that can be
- used by the PPP peripheral drivers and the user to start using the HAL.
- [..]
- The HAL contains two APIs' categories:
- (+) Common HAL APIs
- (+) Services HAL APIs
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup HAL HAL
- * @brief HAL module driver.
- * @{
- */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @addtogroup HAL_Private_Constants
- * @{
- */
-/**
- * @brief STM32F4xx HAL Driver version number V1.3.2
- */
-#define __STM32F4xx_HAL_VERSION_MAIN (0x01) /*!< [31:24] main version */
-#define __STM32F4xx_HAL_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */
-#define __STM32F4xx_HAL_VERSION_SUB2 (0x02) /*!< [15:8] sub2 version */
-#define __STM32F4xx_HAL_VERSION_RC (0x00) /*!< [7:0] release candidate */
-#define __STM32F4xx_HAL_VERSION ((__STM32F4xx_HAL_VERSION_MAIN << 24)\
- |(__STM32F4xx_HAL_VERSION_SUB1 << 16)\
- |(__STM32F4xx_HAL_VERSION_SUB2 << 8 )\
- |(__STM32F4xx_HAL_VERSION_RC))
-
-#define IDCODE_DEVID_MASK ((uint32_t)0x00000FFF)
-
-/* ------------ RCC registers bit address in the alias region ----------- */
-#define SYSCFG_OFFSET (SYSCFG_BASE - PERIPH_BASE)
-/* --- MEMRMP Register ---*/
-/* Alias word address of UFB_MODE bit */
-#define MEMRMP_OFFSET SYSCFG_OFFSET
-#define UFB_MODE_BIT_NUMBER POSITION_VAL(SYSCFG_MEMRMP_UFB_MODE)
-#define UFB_MODE_BB (uint32_t)(PERIPH_BB_BASE + (MEMRMP_OFFSET * 32) + (UFB_MODE_BIT_NUMBER * 4))
-
-/* --- CMPCR Register ---*/
-/* Alias word address of CMP_PD bit */
-#define CMPCR_OFFSET (SYSCFG_OFFSET + 0x20)
-#define CMP_PD_BIT_NUMBER POSITION_VAL(SYSCFG_CMPCR_CMP_PD)
-#define CMPCR_CMP_PD_BB (uint32_t)(PERIPH_BB_BASE + (CMPCR_OFFSET * 32) + (CMP_PD_BIT_NUMBER * 4))
-/**
- * @}
- */
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/** @addtogroup HAL_Private_Variables
- * @{
- */
-static __IO uint32_t uwTick;
-/**
- * @}
- */
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup HAL_Exported_Functions HAL Exported Functions
- * @{
- */
-
-/** @defgroup HAL_Exported_Functions_Group1 Initialization and de-initialization Functions
- * @brief Initialization and de-initialization functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Initializes the Flash interface the NVIC allocation and initial clock
- configuration. It initializes the systick also when timeout is needed
- and the backup domain when enabled.
- (+) de-Initializes common part of the HAL
- (+) Configure The time base source to have 1ms time base with a dedicated
- Tick interrupt priority.
- (++) Systick timer is used by default as source of time base, but user
- can eventually implement his proper time base source (a general purpose
- timer for example or other time source), keeping in mind that Time base
- duration should be kept 1ms since PPP_TIMEOUT_VALUEs are defined and
- handled in milliseconds basis.
- (++) Time base configuration function (HAL_InitTick ()) is called automatically
- at the beginning of the program after reset by HAL_Init() or at any time
- when clock is configured, by HAL_RCC_ClockConfig().
- (++) Source of time base is configured to generate interrupts at regular
- time intervals. Care must be taken if HAL_Delay() is called from a
- peripheral ISR process, the Tick interrupt line must have higher priority
- (numerically lower) than the peripheral interrupt. Otherwise the caller
- ISR process will be blocked.
- (++) functions affecting time base configurations are declared as __weak
- to make override possible in case of other implementations in user file.
-@endverbatim
- * @{
- */
-
-/**
- * @brief This function is used to initialize the HAL Library; it must be the first
- * instruction to be executed in the main program (before to call any other
- * HAL function), it performs the following:
- * Configure the Flash prefetch, instruction and Data caches.
- * Configures the SysTick to generate an interrupt each 1 millisecond,
- * which is clocked by the HSI (at this stage, the clock is not yet
- * configured and thus the system is running from the internal HSI at 16 MHz).
- * Set NVIC Group Priority to 4.
- * Calls the HAL_MspInit() callback function defined in user file
- * "stm32f4xx_hal_msp.c" to do the global low level hardware initialization
- *
- * @note SysTick is used as time base for the HAL_Delay() function, the application
- * need to ensure that the SysTick time base is always set to 1 millisecond
- * to have correct HAL operation.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_Init(void)
-{
- /* Configure Flash prefetch, Instruction cache, Data cache */
-#if (INSTRUCTION_CACHE_ENABLE != 0)
- __HAL_FLASH_INSTRUCTION_CACHE_ENABLE();
-#endif /* INSTRUCTION_CACHE_ENABLE */
-
-#if (DATA_CACHE_ENABLE != 0)
- __HAL_FLASH_DATA_CACHE_ENABLE();
-#endif /* DATA_CACHE_ENABLE */
-
-#if (PREFETCH_ENABLE != 0)
- __HAL_FLASH_PREFETCH_BUFFER_ENABLE();
-#endif /* PREFETCH_ENABLE */
-
- /* Set Interrupt Group Priority */
- HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
-
- /* Use systick as time base source and configure 1ms tick (default clock after Reset is HSI) */
- HAL_InitTick(TICK_INT_PRIORITY);
-
- /* Init the low level hardware */
- HAL_MspInit();
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief This function de-Initializes common part of the HAL and stops the systick.
- * This function is optional.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DeInit(void)
-{
- /* Reset of all peripherals */
- __HAL_RCC_APB1_FORCE_RESET();
- __HAL_RCC_APB1_RELEASE_RESET();
-
- __HAL_RCC_APB2_FORCE_RESET();
- __HAL_RCC_APB2_RELEASE_RESET();
-
- __HAL_RCC_AHB1_FORCE_RESET();
- __HAL_RCC_AHB1_RELEASE_RESET();
-
- __HAL_RCC_AHB2_FORCE_RESET();
- __HAL_RCC_AHB2_RELEASE_RESET();
-
- __HAL_RCC_AHB3_FORCE_RESET();
- __HAL_RCC_AHB3_RELEASE_RESET();
-
- /* De-Init the low level hardware */
- HAL_MspDeInit();
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the MSP.
- * @retval None
- */
-__weak void HAL_MspInit(void)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes the MSP.
- * @retval None
- */
-__weak void HAL_MspDeInit(void)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @brief This function configures the source of the time base.
- * The time source is configured to have 1ms time base with a dedicated
- * Tick interrupt priority.
- * @note This function is called automatically at the beginning of program after
- * reset by HAL_Init() or at any time when clock is reconfigured by HAL_RCC_ClockConfig().
- * @note In the default implementation, SysTick timer is the source of time base.
- * It is used to generate interrupts at regular time intervals.
- * Care must be taken if HAL_Delay() is called from a peripheral ISR process,
- * The the SysTick interrupt must have higher priority (numerically lower)
- * than the peripheral interrupt. Otherwise the caller ISR process will be blocked.
- * The function is declared as __weak to be overwritten in case of other
- * implementation in user file.
- * @param TickPriority: Tick interrupt priority.
- * @retval HAL status
- */
-__weak HAL_StatusTypeDef HAL_InitTick(uint32_t TickPriority)
-{
- /*Configure the SysTick to have interrupt in 1ms time basis*/
- HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq()/1000);
-
- /*Configure the SysTick IRQ priority */
- HAL_NVIC_SetPriority(SysTick_IRQn, TickPriority ,0);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup HAL_Exported_Functions_Group2 HAL Control functions
- * @brief HAL Control functions
- *
-@verbatim
- ===============================================================================
- ##### HAL Control functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Provide a tick value in millisecond
- (+) Provide a blocking delay in millisecond
- (+) Suspend the time base source interrupt
- (+) Resume the time base source interrupt
- (+) Get the HAL API driver version
- (+) Get the device identifier
- (+) Get the device revision identifier
- (+) Enable/Disable Debug module during SLEEP mode
- (+) Enable/Disable Debug module during STOP mode
- (+) Enable/Disable Debug module during STANDBY mode
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief This function is called to increment a global variable "uwTick"
- * used as application time base.
- * @note In the default implementation, this variable is incremented each 1ms
- * in Systick ISR.
- * @note This function is declared as __weak to be overwritten in case of other
- * implementations in user file.
- * @retval None
- */
-__weak void HAL_IncTick(void)
-{
- uwTick++;
-}
-
-/**
- * @brief Provides a tick value in millisecond.
- * @note This function is declared as __weak to be overwritten in case of other
- * implementations in user file.
- * @retval tick value
- */
-__weak uint32_t HAL_GetTick(void)
-{
- return uwTick;
-}
-
-/**
- * @brief This function provides accurate delay (in milliseconds) based
- * on variable incremented.
- * @note In the default implementation , SysTick timer is the source of time base.
- * It is used to generate interrupts at regular time intervals where uwTick
- * is incremented.
- * @note This function is declared as __weak to be overwritten in case of other
- * implementations in user file.
- * @param Delay: specifies the delay time length, in milliseconds.
- * @retval None
- */
-__weak void HAL_Delay(__IO uint32_t Delay)
-{
- uint32_t tickstart = 0;
- tickstart = HAL_GetTick();
- while((HAL_GetTick() - tickstart) < Delay)
- {
- }
-}
-
-/**
- * @brief Suspend Tick increment.
- * @note In the default implementation , SysTick timer is the source of time base. It is
- * used to generate interrupts at regular time intervals. Once HAL_SuspendTick()
- * is called, the SysTick interrupt will be disabled and so Tick increment
- * is suspended.
- * @note This function is declared as __weak to be overwritten in case of other
- * implementations in user file.
- * @retval None
- */
-__weak void HAL_SuspendTick(void)
-{
- /* Disable SysTick Interrupt */
- SysTick->CTRL &= ~SysTick_CTRL_TICKINT_Msk;
-}
-
-/**
- * @brief Resume Tick increment.
- * @note In the default implementation , SysTick timer is the source of time base. It is
- * used to generate interrupts at regular time intervals. Once HAL_ResumeTick()
- * is called, the SysTick interrupt will be enabled and so Tick increment
- * is resumed.
- * @note This function is declared as __weak to be overwritten in case of other
- * implementations in user file.
- * @retval None
- */
-__weak void HAL_ResumeTick(void)
-{
- /* Enable SysTick Interrupt */
- SysTick->CTRL |= SysTick_CTRL_TICKINT_Msk;
-}
-
-/**
- * @brief Returns the HAL revision
- * @retval version : 0xXYZR (8bits for each decimal, R for RC)
- */
-uint32_t HAL_GetHalVersion(void)
-{
- return __STM32F4xx_HAL_VERSION;
-}
-
-/**
- * @brief Returns the device revision identifier.
- * @retval Device revision identifier
- */
-uint32_t HAL_GetREVID(void)
-{
- return((DBGMCU->IDCODE) >> 16);
-}
-
-/**
- * @brief Returns the device identifier.
- * @retval Device identifier
- */
-uint32_t HAL_GetDEVID(void)
-{
- return((DBGMCU->IDCODE) & IDCODE_DEVID_MASK);
-}
-
-/**
- * @brief Enable the Debug Module during SLEEP mode
- * @retval None
- */
-void HAL_DBGMCU_EnableDBGSleepMode(void)
-{
- SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
-}
-
-/**
- * @brief Disable the Debug Module during SLEEP mode
- * @retval None
- */
-void HAL_DBGMCU_DisableDBGSleepMode(void)
-{
- CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_SLEEP);
-}
-
-/**
- * @brief Enable the Debug Module during STOP mode
- * @retval None
- */
-void HAL_DBGMCU_EnableDBGStopMode(void)
-{
- SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
-}
-
-/**
- * @brief Disable the Debug Module during STOP mode
- * @retval None
- */
-void HAL_DBGMCU_DisableDBGStopMode(void)
-{
- CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STOP);
-}
-
-/**
- * @brief Enable the Debug Module during STANDBY mode
- * @retval None
- */
-void HAL_DBGMCU_EnableDBGStandbyMode(void)
-{
- SET_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
-}
-
-/**
- * @brief Disable the Debug Module during STANDBY mode
- * @retval None
- */
-void HAL_DBGMCU_DisableDBGStandbyMode(void)
-{
- CLEAR_BIT(DBGMCU->CR, DBGMCU_CR_DBG_STANDBY);
-}
-
-/**
- * @brief Enables the I/O Compensation Cell.
- * @note The I/O compensation cell can be used only when the device supply
- * voltage ranges from 2.4 to 3.6 V.
- * @retval None
- */
-void HAL_EnableCompensationCell(void)
-{
- *(__IO uint32_t *)CMPCR_CMP_PD_BB = (uint32_t)ENABLE;
-}
-
-/**
- * @brief Power-down the I/O Compensation Cell.
- * @note The I/O compensation cell can be used only when the device supply
- * voltage ranges from 2.4 to 3.6 V.
- * @retval None
- */
-void HAL_DisableCompensationCell(void)
-{
- *(__IO uint32_t *)CMPCR_CMP_PD_BB = (uint32_t)DISABLE;
-}
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
-/**
- * @brief Enables the Internal FLASH Bank Swapping.
- *
- * @note This function can be used only for STM32F42xxx/43xxx devices.
- *
- * @note Flash Bank2 mapped at 0x08000000 (and aliased @0x00000000)
- * and Flash Bank1 mapped at 0x08100000 (and aliased at 0x00100000)
- *
- * @retval None
- */
-void HAL_EnableMemorySwappingBank(void)
-{
- *(__IO uint32_t *)UFB_MODE_BB = (uint32_t)ENABLE;
-}
-
-/**
- * @brief Disables the Internal FLASH Bank Swapping.
- *
- * @note This function can be used only for STM32F42xxx/43xxx devices.
- *
- * @note The default state : Flash Bank1 mapped at 0x08000000 (and aliased @0x0000 0000)
- * and Flash Bank2 mapped at 0x08100000 (and aliased at 0x00100000)
- *
- * @retval None
- */
-void HAL_DisableMemorySwappingBank(void)
-{
-
- *(__IO uint32_t *)UFB_MODE_BB = (uint32_t)DISABLE;
-}
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c
deleted file mode 100644
index 00900e7..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc.c
+++ /dev/null
@@ -1,1412 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_adc.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief This file provides firmware functions to manage the following
- * functionalities of the Analog to Digital Convertor (ADC) peripheral:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + State and errors functions
- *
- @verbatim
- ==============================================================================
- ##### ADC Peripheral features #####
- ==============================================================================
- [..]
- (#) 12-bit, 10-bit, 8-bit or 6-bit configurable resolution.
- (#) Interrupt generation at the end of conversion, end of injected conversion,
- and in case of analog watchdog or overrun events
- (#) Single and continuous conversion modes.
- (#) Scan mode for automatic conversion of channel 0 to channel x.
- (#) Data alignment with in-built data coherency.
- (#) Channel-wise programmable sampling time.
- (#) External trigger option with configurable polarity for both regular and
- injected conversion.
- (#) Dual/Triple mode (on devices with 2 ADCs or more).
- (#) Configurable DMA data storage in Dual/Triple ADC mode.
- (#) Configurable delay between conversions in Dual/Triple interleaved mode.
- (#) ADC conversion type (refer to the datasheets).
- (#) ADC supply requirements: 2.4 V to 3.6 V at full speed and down to 1.8 V at
- slower speed.
- (#) ADC input range: VREF(minus) = VIN = VREF(plus).
- (#) DMA request generation during regular channel conversion.
-
-
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (#)Initialize the ADC low level resources by implementing the HAL_ADC_MspInit():
- (##) Enable the ADC interface clock using __HAL_RCC_ADC_CLK_ENABLE()
- (##) ADC pins configuration
- (+++) Enable the clock for the ADC GPIOs using the following function:
- __HAL_RCC_GPIOx_CLK_ENABLE()
- (+++) Configure these ADC pins in analog mode using HAL_GPIO_Init()
- (##) In case of using interrupts (e.g. HAL_ADC_Start_IT())
- (+++) Configure the ADC interrupt priority using HAL_NVIC_SetPriority()
- (+++) Enable the ADC IRQ handler using HAL_NVIC_EnableIRQ()
- (+++) In ADC IRQ handler, call HAL_ADC_IRQHandler()
- (##) In case of using DMA to control data transfer (e.g. HAL_ADC_Start_DMA())
- (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE()
- (+++) Configure and enable two DMA streams stream for managing data
- transfer from peripheral to memory (output stream)
- (+++) Associate the initialized DMA handle to the CRYP DMA handle
- using __HAL_LINKDMA()
- (+++) Configure the priority and enable the NVIC for the transfer complete
- interrupt on the two DMA Streams. The output stream should have higher
- priority than the input stream.
-
- *** Configuration of ADC, groups regular/injected, channels parameters ***
- ==============================================================================
- [..]
- (#) Configure the ADC parameters (resolution, data alignment, ...)
- and regular group parameters (conversion trigger, sequencer, ...)
- using function HAL_ADC_Init().
-
- (#) Configure the channels for regular group parameters (channel number,
- channel rank into sequencer, ..., into regular group)
- using function HAL_ADC_ConfigChannel().
-
- (#) Optionally, configure the injected group parameters (conversion trigger,
- sequencer, ..., of injected group)
- and the channels for injected group parameters (channel number,
- channel rank into sequencer, ..., into injected group)
- using function HAL_ADCEx_InjectedConfigChannel().
-
- (#) Optionally, configure the analog watchdog parameters (channels
- monitored, thresholds, ...) using function HAL_ADC_AnalogWDGConfig().
-
- (#) Optionally, for devices with several ADC instances: configure the
- multimode parameters using function HAL_ADCEx_MultiModeConfigChannel().
-
- *** Execution of ADC conversions ***
- ==============================================================================
- [..]
- (#) ADC driver can be used among three modes: polling, interruption,
- transfer by DMA.
-
- *** Polling mode IO operation ***
- =================================
- [..]
- (+) Start the ADC peripheral using HAL_ADC_Start()
- (+) Wait for end of conversion using HAL_ADC_PollForConversion(), at this stage
- user can specify the value of timeout according to his end application
- (+) To read the ADC converted values, use the HAL_ADC_GetValue() function.
- (+) Stop the ADC peripheral using HAL_ADC_Stop()
-
- *** Interrupt mode IO operation ***
- ===================================
- [..]
- (+) Start the ADC peripheral using HAL_ADC_Start_IT()
- (+) Use HAL_ADC_IRQHandler() called under ADC_IRQHandler() Interrupt subroutine
- (+) At ADC end of conversion HAL_ADC_ConvCpltCallback() function is executed and user can
- add his own code by customization of function pointer HAL_ADC_ConvCpltCallback
- (+) In case of ADC Error, HAL_ADC_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_ADC_ErrorCallback
- (+) Stop the ADC peripheral using HAL_ADC_Stop_IT()
-
- *** DMA mode IO operation ***
- ==============================
- [..]
- (+) Start the ADC peripheral using HAL_ADC_Start_DMA(), at this stage the user specify the length
- of data to be transferred at each end of conversion
- (+) At The end of data transfer by HAL_ADC_ConvCpltCallback() function is executed and user can
- add his own code by customization of function pointer HAL_ADC_ConvCpltCallback
- (+) In case of transfer Error, HAL_ADC_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_ADC_ErrorCallback
- (+) Stop the ADC peripheral using HAL_ADC_Stop_DMA()
-
- *** ADC HAL driver macros list ***
- =============================================
- [..]
- Below the list of most used macros in ADC HAL driver.
-
- (+) __HAL_ADC_ENABLE : Enable the ADC peripheral
- (+) __HAL_ADC_DISABLE : Disable the ADC peripheral
- (+) __HAL_ADC_ENABLE_IT: Enable the ADC end of conversion interrupt
- (+) __HAL_ADC_DISABLE_IT: Disable the ADC end of conversion interrupt
- (+) __HAL_ADC_GET_IT_SOURCE: Check if the specified ADC interrupt source is enabled or disabled
- (+) __HAL_ADC_CLEAR_FLAG: Clear the ADC's pending flags
- (+) __HAL_ADC_GET_FLAG: Get the selected ADC's flag status
- (+) ADC_GET_RESOLUTION: Return resolution bits in CR1 register
-
- [..]
- (@) You can refer to the ADC HAL driver header file for more useful macros
-
- *** Deinitialization of ADC ***
- ==============================================================================
- [..]
- (#) Disable the ADC interface
- (++) ADC clock can be hard reset and disabled at RCC top level.
- (++) Hard reset of ADC peripherals
- using macro __HAL_RCC_ADC_FORCE_RESET(), __HAL_RCC_ADC_RELEASE_RESET().
- (++) ADC clock disable using the equivalent macro/functions as configuration step.
- (+++) Example:
- Into HAL_ADC_MspDeInit() (recommended code location) or with
- other device clock parameters configuration:
- (+++) HAL_RCC_GetOscConfig(&RCC_OscInitStructure);
- (+++) RCC_OscInitStructure.OscillatorType = RCC_OSCILLATORTYPE_HSI;
- (+++) RCC_OscInitStructure.HSIState = RCC_HSI_OFF; (if not used for system clock)
- (+++) HAL_RCC_OscConfig(&RCC_OscInitStructure);
-
- (#) ADC pins configuration
- (++) Disable the clock for the ADC GPIOs using macro __HAL_RCC_GPIOx_CLK_DISABLE()
-
- (#) Optionally, in case of usage of ADC with interruptions:
- (++) Disable the NVIC for ADC using function HAL_NVIC_DisableIRQ(ADCx_IRQn)
-
- (#) Optionally, in case of usage of DMA:
- (++) Deinitialize the DMA using function HAL_DMA_DeInit().
- (++) Disable the NVIC for DMA using function HAL_NVIC_DisableIRQ(DMAx_Channelx_IRQn)
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup ADC ADC
- * @brief ADC driver modules
- * @{
- */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/** @addtogroup ADC_Private_Functions
- * @{
- */
-/* Private function prototypes -----------------------------------------------*/
-static void ADC_Init(ADC_HandleTypeDef* hadc);
-static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma);
-static void ADC_DMAError(DMA_HandleTypeDef *hdma);
-static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma);
-/**
- * @}
- */
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup ADC_Exported_Functions ADC Exported Functions
- * @{
- */
-
-/** @defgroup ADC_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Initialize and configure the ADC.
- (+) De-initialize the ADC.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the ADCx peripheral according to the specified parameters
- * in the ADC_InitStruct and initializes the ADC MSP.
- *
- * @note This function is used to configure the global features of the ADC (
- * ClockPrescaler, Resolution, Data Alignment and number of conversion), however,
- * the rest of the configuration parameters are specific to the regular
- * channels group (scan mode activation, continuous mode activation,
- * External trigger source and edge, DMA continuous request after the
- * last transfer and End of conversion selection).
- *
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc)
-{
- /* Check ADC handle */
- if(hadc == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
- assert_param(IS_ADC_CLOCKPRESCALER(hadc->Init.ClockPrescaler));
- assert_param(IS_ADC_RESOLUTION(hadc->Init.Resolution));
- assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ScanConvMode));
- assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
- assert_param(IS_ADC_EXT_TRIG(hadc->Init.ExternalTrigConv));
- assert_param(IS_ADC_DATA_ALIGN(hadc->Init.DataAlign));
- assert_param(IS_ADC_REGULAR_LENGTH(hadc->Init.NbrOfConversion));
- assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DMAContinuousRequests));
- assert_param(IS_ADC_EOCSelection(hadc->Init.EOCSelection));
- assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DiscontinuousConvMode));
-
- if(hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START)
- {
- assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
- }
-
- if(hadc->State == HAL_ADC_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hadc->Lock = HAL_UNLOCKED;
- /* Init the low level hardware */
- HAL_ADC_MspInit(hadc);
- }
-
- /* Initialize the ADC state */
- hadc->State = HAL_ADC_STATE_BUSY;
-
- /* Set ADC parameters */
- ADC_Init(hadc);
-
- /* Set ADC error code to none */
- hadc->ErrorCode = HAL_ADC_ERROR_NONE;
-
- /* Initialize the ADC state */
- hadc->State = HAL_ADC_STATE_READY;
-
- /* Release Lock */
- __HAL_UNLOCK(hadc);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Deinitializes the ADCx peripheral registers to their default reset values.
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef* hadc)
-{
- /* Check ADC handle */
- if(hadc == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_ADC_ALL_INSTANCE(hadc->Instance));
-
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_BUSY;
-
- /* DeInit the low level hardware */
- HAL_ADC_MspDeInit(hadc);
-
- /* Set ADC error code to none */
- hadc->ErrorCode = HAL_ADC_ERROR_NONE;
-
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_RESET;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the ADC MSP.
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval None
- */
-__weak void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_ADC_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes the ADC MSP.
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval None
- */
-__weak void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_ADC_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup ADC_Exported_Functions_Group2 IO operation functions
- * @brief IO operation functions
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Start conversion of regular channel.
- (+) Stop conversion of regular channel.
- (+) Start conversion of regular channel and enable interrupt.
- (+) Stop conversion of regular channel and disable interrupt.
- (+) Start conversion of regular channel and enable DMA transfer.
- (+) Stop conversion of regular channel and disable DMA transfer.
- (+) Handle ADC interrupt request.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Enables ADC and starts conversion of the regular channels.
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc)
-{
- __IO uint32_t counter = 0;
-
- /* Check the parameters */
- assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
- assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
-
- /* Process locked */
- __HAL_LOCK(hadc);
-
- /* Check if an injected conversion is ongoing */
- if(hadc->State == HAL_ADC_STATE_BUSY_INJ)
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_BUSY_INJ_REG;
- }
- else
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_BUSY_REG;
- }
-
- /* Check if ADC peripheral is disabled in order to enable it and wait during
- Tstab time the ADC's stabilization */
- if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
- {
- /* Enable the Peripheral */
- __HAL_ADC_ENABLE(hadc);
-
- /* Delay for ADC stabilization time */
- /* Compute number of CPU cycles to wait for */
- counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000));
- while(counter != 0)
- {
- counter--;
- }
- }
-
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
-
- /* Check if Multimode enabled */
- if(HAL_IS_BIT_CLR(ADC->CCR, ADC_CCR_MULTI))
- {
- /* if no external trigger present enable software conversion of regular channels */
- if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET)
- {
- /* Enable the selected ADC software conversion for regular group */
- hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
- }
- }
- else
- {
- /* if instance of handle correspond to ADC1 and no external trigger present enable software conversion of regular channels */
- if((hadc->Instance == ADC1) && ((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET))
- {
- /* Enable the selected ADC software conversion for regular group */
- hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Disables ADC and stop conversion of regular channels.
- *
- * @note Caution: This function will stop also injected channels.
- *
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- *
- * @retval HAL status.
- */
-HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc)
-{
- /* Disable the Peripheral */
- __HAL_ADC_DISABLE(hadc);
-
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Poll for regular conversion complete
- * @note ADC conversion flags EOS (end of sequence) and EOC (end of
- * conversion) are cleared by this function.
- * @note This function cannot be used in a particular setup: ADC configured
- * in DMA mode and polling for end of each conversion (ADC init
- * parameter "EOCSelection" set to ADC_EOC_SINGLE_CONV).
- * In this case, DMA resets the flag EOC and polling cannot be
- * performed on each conversion. Nevertheless, polling can still
- * be performed on the complete sequence.
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @param Timeout: Timeout value in millisecond.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Verification that ADC configuration is compliant with polling for */
- /* each conversion: */
- /* Particular case is ADC configured in DMA mode and ADC sequencer with */
- /* several ranks and polling for end of each conversion. */
- /* For code simplicity sake, this particular case is generalized to */
- /* ADC configured in DMA mode and polling for end of each conversion. */
- if (HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_EOCS) &&
- HAL_IS_BIT_SET(hadc->Instance->CR2, ADC_CR2_DMA) )
- {
- /* Update ADC state machine to error */
- hadc->State = HAL_ADC_STATE_ERROR;
-
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
-
- return HAL_ERROR;
- }
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Check End of conversion flag */
- while(!(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOC)))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- hadc->State= HAL_ADC_STATE_TIMEOUT;
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Check if an injected conversion is ready */
- if(hadc->State == HAL_ADC_STATE_EOC_INJ)
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_EOC_INJ_REG;
- }
- else
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_EOC_REG;
- }
-
- /* Return ADC state */
- return HAL_OK;
-}
-
-/**
- * @brief Poll for conversion event
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @param EventType: the ADC event type.
- * This parameter can be one of the following values:
- * @arg ADC_AWD_EVENT: ADC Analog watch Dog event.
- * @arg ADC_OVR_EVENT: ADC Overrun event.
- * @param Timeout: Timeout value in millisecond.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Check the parameters */
- assert_param(IS_ADC_EVENT_TYPE(EventType));
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Check selected event flag */
- while(!(__HAL_ADC_GET_FLAG(hadc,EventType)))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- hadc->State= HAL_ADC_STATE_TIMEOUT;
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Check analog watchdog flag */
- if(EventType == ADC_AWD_EVENT)
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_AWD;
-
- /* Clear the ADCx's analog watchdog flag */
- __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_AWD);
- }
- else
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_ERROR;
-
- /* Clear the ADCx's Overrun flag */
- __HAL_ADC_CLEAR_FLAG(hadc, ADC_FLAG_OVR);
- }
-
- /* Return ADC state */
- return HAL_OK;
-}
-
-
-/**
- * @brief Enables the interrupt and starts ADC conversion of regular channels.
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval HAL status.
- */
-HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc)
-{
- __IO uint32_t counter = 0;
-
- /* Check the parameters */
- assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
- assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
-
- /* Process locked */
- __HAL_LOCK(hadc);
-
- /* Check if an injected conversion is ongoing */
- if(hadc->State == HAL_ADC_STATE_BUSY_INJ)
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_BUSY_INJ_REG;
- }
- else
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_BUSY_REG;
- }
-
- /* Set ADC error code to none */
- hadc->ErrorCode = HAL_ADC_ERROR_NONE;
-
- /* Check if ADC peripheral is disabled in order to enable it and wait during
- Tstab time the ADC's stabilization */
- if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
- {
- /* Enable the Peripheral */
- __HAL_ADC_ENABLE(hadc);
-
- /* Delay for ADC stabilization time */
- /* Compute number of CPU cycles to wait for */
- counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000));
- while(counter != 0)
- {
- counter--;
- }
- }
-
- /* Enable the ADC overrun interrupt */
- __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR);
-
- /* Enable the ADC end of conversion interrupt for regular group */
- __HAL_ADC_ENABLE_IT(hadc, ADC_IT_EOC);
-
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
-
- /* Check if Multimode enabled */
- if(HAL_IS_BIT_CLR(ADC->CCR, ADC_CCR_MULTI))
- {
- /* if no external trigger present enable software conversion of regular channels */
- if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET)
- {
- /* Enable the selected ADC software conversion for regular group */
- hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
- }
- }
- else
- {
- /* if instance of handle correspond to ADC1 and no external trigger present enable software conversion of regular channels */
- if((hadc->Instance == (ADC_TypeDef*)0x40012000) && ((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET))
- {
- /* Enable the selected ADC software conversion for regular group */
- hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Disables the interrupt and stop ADC conversion of regular channels.
- *
- * @note Caution: This function will stop also injected channels.
- *
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval HAL status.
- */
-HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc)
-{
- /* Disable the ADC end of conversion interrupt for regular group */
- __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC);
-
- /* Disable the ADC end of conversion interrupt for injected group */
- __HAL_ADC_DISABLE_IT(hadc, ADC_CR1_JEOCIE);
-
- /* Enable the Peripheral */
- __HAL_ADC_DISABLE(hadc);
-
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Handles ADC interrupt request
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval None
- */
-void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc)
-{
- uint32_t tmp1 = 0, tmp2 = 0;
-
- /* Check the parameters */
- assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
- assert_param(IS_ADC_REGULAR_LENGTH(hadc->Init.NbrOfConversion));
- assert_param(IS_ADC_EOCSelection(hadc->Init.EOCSelection));
-
- tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_EOC);
- tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_EOC);
- /* Check End of conversion flag for regular channels */
- if(tmp1 && tmp2)
- {
- /* Check if an injected conversion is ready */
- if(hadc->State == HAL_ADC_STATE_EOC_INJ)
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_EOC_INJ_REG;
- }
- else
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_EOC_REG;
- }
-
- if((hadc->Init.ContinuousConvMode == DISABLE) && ((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET))
- {
- if(hadc->Init.EOCSelection == ADC_EOC_SEQ_CONV)
- {
- /* DISABLE the ADC end of conversion interrupt for regular group */
- __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC);
-
- /* DISABLE the ADC overrun interrupt */
- __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR);
- }
- else
- {
- if (hadc->NbrOfCurrentConversionRank == 0)
- {
- hadc->NbrOfCurrentConversionRank = hadc->Init.NbrOfConversion;
- }
-
- /* Decrement the number of conversion when an interrupt occurs */
- hadc->NbrOfCurrentConversionRank--;
-
- /* Check if all conversions are finished */
- if(hadc->NbrOfCurrentConversionRank == 0)
- {
- /* DISABLE the ADC end of conversion interrupt for regular group */
- __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC);
-
- /* DISABLE the ADC overrun interrupt */
- __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR);
- }
- }
- }
-
- /* Conversion complete callback */
- HAL_ADC_ConvCpltCallback(hadc);
-
- /* Clear the ADCx flag for regular end of conversion */
- __HAL_ADC_CLEAR_FLAG(hadc,ADC_FLAG_EOC);
- }
-
- tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOC);
- tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_JEOC);
- /* Check End of conversion flag for injected channels */
- if(tmp1 && tmp2)
- {
- /* Check if a regular conversion is ready */
- if(hadc->State == HAL_ADC_STATE_EOC_REG)
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_EOC_INJ_REG;
- }
- else
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_EOC_INJ;
- }
-
- tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
- tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
- if(((hadc->Init.ContinuousConvMode == DISABLE) || tmp1) && tmp2)
- {
- /* DISABLE the ADC end of conversion interrupt for injected group */
- __HAL_ADC_DISABLE_IT(hadc, ADC_IT_JEOC);
- }
-
- /* Conversion complete callback */
- HAL_ADCEx_InjectedConvCpltCallback(hadc);
-
- /* Clear the ADCx flag for injected end of conversion */
- __HAL_ADC_CLEAR_FLAG(hadc,ADC_FLAG_JEOC);
- }
-
- tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_AWD);
- tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_AWD);
- /* Check Analog watchdog flag */
- if(tmp1 && tmp2)
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_AWD;
-
- /* Clear the ADCx's Analog watchdog flag */
- __HAL_ADC_CLEAR_FLAG(hadc,ADC_FLAG_AWD);
-
- /* Level out of window callback */
- HAL_ADC_LevelOutOfWindowCallback(hadc);
- }
-
- tmp1 = __HAL_ADC_GET_FLAG(hadc, ADC_FLAG_OVR);
- tmp2 = __HAL_ADC_GET_IT_SOURCE(hadc, ADC_IT_OVR);
- /* Check Overrun flag */
- if(tmp1 && tmp2)
- {
- /* Change ADC state to overrun state */
- hadc->State = HAL_ADC_STATE_ERROR;
-
- /* Set ADC error code to overrun */
- hadc->ErrorCode |= HAL_ADC_ERROR_OVR;
-
- /* Clear the Overrun flag */
- __HAL_ADC_CLEAR_FLAG(hadc,ADC_FLAG_OVR);
-
- /* Error callback */
- HAL_ADC_ErrorCallback(hadc);
- }
-}
-
-/**
- * @brief Enables ADC DMA request after last transfer (Single-ADC mode) and enables ADC peripheral
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @param pData: The destination Buffer address.
- * @param Length: The length of data to be transferred from ADC peripheral to memory.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length)
-{
- __IO uint32_t counter = 0;
-
- /* Check the parameters */
- assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
- assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
-
- /* Process locked */
- __HAL_LOCK(hadc);
-
- /* Enable ADC overrun interrupt */
- __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR);
-
- /* Enable ADC DMA mode */
- hadc->Instance->CR2 |= ADC_CR2_DMA;
-
- /* Set the DMA transfer complete callback */
- hadc->DMA_Handle->XferCpltCallback = ADC_DMAConvCplt;
-
- /* Set the DMA half transfer complete callback */
- hadc->DMA_Handle->XferHalfCpltCallback = ADC_DMAHalfConvCplt;
-
- /* Set the DMA error callback */
- hadc->DMA_Handle->XferErrorCallback = ADC_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&hadc->Instance->DR, (uint32_t)pData, Length);
-
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_BUSY_REG;
-
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
-
- /* Check if ADC peripheral is disabled in order to enable it and wait during
- Tstab time the ADC's stabilization */
- if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
- {
- /* Enable the Peripheral */
- __HAL_ADC_ENABLE(hadc);
-
- /* Delay for ADC stabilization time */
- /* Compute number of CPU cycles to wait for */
- counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000));
- while(counter != 0)
- {
- counter--;
- }
- }
-
- /* if no external trigger present enable software conversion of regular channels */
- if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET)
- {
- /* Enable the selected ADC software conversion for regular group */
- hadc->Instance->CR2 |= ADC_CR2_SWSTART;
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Disables ADC DMA (Single-ADC mode) and disables ADC peripheral
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc)
-{
- /* Disable the Peripheral */
- __HAL_ADC_DISABLE(hadc);
-
- /* Disable ADC overrun interrupt */
- __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR);
-
- /* Disable the selected ADC DMA mode */
- hadc->Instance->CR2 &= ~ADC_CR2_DMA;
-
- /* Disable the ADC DMA Stream */
- HAL_DMA_Abort(hadc->DMA_Handle);
-
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Gets the converted value from data register of regular channel.
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval Converted value
- */
-uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc)
-{
- /* Return the selected ADC converted value */
- return hadc->Instance->DR;
-}
-
-/**
- * @brief Regular conversion complete callback in non blocking mode
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval None
- */
-__weak void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_ADC_ConvCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Regular conversion half DMA transfer callback in non blocking mode
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval None
- */
-__weak void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_ADC_ConvHalfCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Analog watchdog callback in non blocking mode
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval None
- */
-__weak void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_ADC_LevelOoutOfWindowCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Error ADC callback.
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval None
- */
-__weak void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_ADC_ErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup ADC_Exported_Functions_Group3 Peripheral Control functions
- * @brief Peripheral Control functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Control functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Configure regular channels.
- (+) Configure injected channels.
- (+) Configure multimode.
- (+) Configure the analog watch dog.
-
-@endverbatim
- * @{
- */
-
- /**
- * @brief Configures for the selected ADC regular channel its corresponding
- * rank in the sequencer and its sample time.
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @param sConfig: ADC configuration structure.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig)
-{
- __IO uint32_t counter = 0;
-
- /* Check the parameters */
- assert_param(IS_ADC_CHANNEL(sConfig->Channel));
- assert_param(IS_ADC_REGULAR_RANK(sConfig->Rank));
- assert_param(IS_ADC_SAMPLE_TIME(sConfig->SamplingTime));
-
- /* Process locked */
- __HAL_LOCK(hadc);
-
- /* if ADC_Channel_10 ... ADC_Channel_18 is selected */
- if (sConfig->Channel > ADC_CHANNEL_9)
- {
- /* Clear the old sample time */
- hadc->Instance->SMPR1 &= ~ADC_SMPR1(ADC_SMPR1_SMP10, sConfig->Channel);
-
- /* Set the new sample time */
- hadc->Instance->SMPR1 |= ADC_SMPR1(sConfig->SamplingTime, sConfig->Channel);
- }
- else /* ADC_Channel include in ADC_Channel_[0..9] */
- {
- /* Clear the old sample time */
- hadc->Instance->SMPR2 &= ~ADC_SMPR2(ADC_SMPR2_SMP0, sConfig->Channel);
-
- /* Set the new sample time */
- hadc->Instance->SMPR2 |= ADC_SMPR2(sConfig->SamplingTime, sConfig->Channel);
- }
-
- /* For Rank 1 to 6 */
- if (sConfig->Rank < 7)
- {
- /* Clear the old SQx bits for the selected rank */
- hadc->Instance->SQR3 &= ~ADC_SQR3_RK(ADC_SQR3_SQ1, sConfig->Rank);
-
- /* Set the SQx bits for the selected rank */
- hadc->Instance->SQR3 |= ADC_SQR3_RK(sConfig->Channel, sConfig->Rank);
- }
- /* For Rank 7 to 12 */
- else if (sConfig->Rank < 13)
- {
- /* Clear the old SQx bits for the selected rank */
- hadc->Instance->SQR2 &= ~ADC_SQR2_RK(ADC_SQR2_SQ7, sConfig->Rank);
-
- /* Set the SQx bits for the selected rank */
- hadc->Instance->SQR2 |= ADC_SQR2_RK(sConfig->Channel, sConfig->Rank);
- }
- /* For Rank 13 to 16 */
- else
- {
- /* Clear the old SQx bits for the selected rank */
- hadc->Instance->SQR1 &= ~ADC_SQR1_RK(ADC_SQR1_SQ13, sConfig->Rank);
-
- /* Set the SQx bits for the selected rank */
- hadc->Instance->SQR1 |= ADC_SQR1_RK(sConfig->Channel, sConfig->Rank);
- }
-
- /* if ADC1 Channel_18 is selected enable VBAT Channel */
- if ((hadc->Instance == ADC1) && (sConfig->Channel == ADC_CHANNEL_VBAT))
- {
- /* Enable the VBAT channel*/
- ADC->CCR |= ADC_CCR_VBATE;
- }
-
- /* if ADC1 Channel_16 or Channel_17 is selected enable TSVREFE Channel(Temperature sensor and VREFINT) */
- if ((hadc->Instance == ADC1) && ((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR) || (sConfig->Channel == ADC_CHANNEL_VREFINT)))
- {
- /* Enable the TSVREFE channel*/
- ADC->CCR |= ADC_CCR_TSVREFE;
-
- if((sConfig->Channel == ADC_CHANNEL_TEMPSENSOR))
- {
- /* Delay for temperature sensor stabilization time */
- /* Compute number of CPU cycles to wait for */
- counter = (ADC_TEMPSENSOR_DELAY_US * (SystemCoreClock / 1000000));
- while(counter != 0)
- {
- counter--;
- }
- }
- }
-
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Configures the analog watchdog.
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @param AnalogWDGConfig : pointer to an ADC_AnalogWDGConfTypeDef structure
- * that contains the configuration information of ADC analog watchdog.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig)
-{
-#ifdef USE_FULL_ASSERT
- uint32_t tmp = 0;
-#endif /* USE_FULL_ASSERT */
-
- /* Check the parameters */
- assert_param(IS_ADC_ANALOG_WATCHDOG(AnalogWDGConfig->WatchdogMode));
- assert_param(IS_ADC_CHANNEL(AnalogWDGConfig->Channel));
- assert_param(IS_FUNCTIONAL_STATE(AnalogWDGConfig->ITMode));
-
-#ifdef USE_FULL_ASSERT
- tmp = ADC_GET_RESOLUTION(hadc);
- assert_param(IS_ADC_RANGE(tmp, AnalogWDGConfig->HighThreshold));
- assert_param(IS_ADC_RANGE(tmp, AnalogWDGConfig->LowThreshold));
-#endif /* USE_FULL_ASSERT */
-
- /* Process locked */
- __HAL_LOCK(hadc);
-
- if(AnalogWDGConfig->ITMode == ENABLE)
- {
- /* Enable the ADC Analog watchdog interrupt */
- __HAL_ADC_ENABLE_IT(hadc, ADC_IT_AWD);
- }
- else
- {
- /* Disable the ADC Analog watchdog interrupt */
- __HAL_ADC_DISABLE_IT(hadc, ADC_IT_AWD);
- }
-
- /* Clear AWDEN, JAWDEN and AWDSGL bits */
- hadc->Instance->CR1 &= ~(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN | ADC_CR1_AWDEN);
-
- /* Set the analog watchdog enable mode */
- hadc->Instance->CR1 |= AnalogWDGConfig->WatchdogMode;
-
- /* Set the high threshold */
- hadc->Instance->HTR = AnalogWDGConfig->HighThreshold;
-
- /* Set the low threshold */
- hadc->Instance->LTR = AnalogWDGConfig->LowThreshold;
-
- /* Clear the Analog watchdog channel select bits */
- hadc->Instance->CR1 &= ~ADC_CR1_AWDCH;
-
- /* Set the Analog watchdog channel */
- hadc->Instance->CR1 |= (uint32_t)((uint16_t)(AnalogWDGConfig->Channel));
-
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup ADC_Exported_Functions_Group4 ADC Peripheral State functions
- * @brief ADC Peripheral State functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral State and errors functions #####
- ===============================================================================
- [..]
- This subsection provides functions allowing to
- (+) Check the ADC state
- (+) Check the ADC Error
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief return the ADC state
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval HAL state
- */
-HAL_ADC_StateTypeDef HAL_ADC_GetState(ADC_HandleTypeDef* hadc)
-{
- /* Return ADC state */
- return hadc->State;
-}
-
-/**
- * @brief Return the ADC error code
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval ADC Error Code
- */
-uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc)
-{
- return hadc->ErrorCode;
-}
-
-/**
- * @}
- */
-
-/** @addtogroup ADC_Private_Functions
- * @{
- */
-
-/**
- * @brief Initializes the ADCx peripheral according to the specified parameters
- * in the ADC_InitStruct without initializing the ADC MSP.
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval None
- */
-static void ADC_Init(ADC_HandleTypeDef* hadc)
-{
- /* Set ADC parameters */
- /* Set the ADC clock prescaler */
- ADC->CCR &= ~(ADC_CCR_ADCPRE);
- ADC->CCR |= hadc->Init.ClockPrescaler;
-
- /* Set ADC scan mode */
- hadc->Instance->CR1 &= ~(ADC_CR1_SCAN);
- hadc->Instance->CR1 |= ADC_CR1_SCANCONV(hadc->Init.ScanConvMode);
-
- /* Set ADC resolution */
- hadc->Instance->CR1 &= ~(ADC_CR1_RES);
- hadc->Instance->CR1 |= hadc->Init.Resolution;
-
- /* Set ADC data alignment */
- hadc->Instance->CR2 &= ~(ADC_CR2_ALIGN);
- hadc->Instance->CR2 |= hadc->Init.DataAlign;
-
- /* Enable external trigger if trigger selection is different of software */
- /* start. */
- /* Note: This configuration keeps the hardware feature of parameter */
- /* ExternalTrigConvEdge "trigger edge none" equivalent to */
- /* software start. */
- if(hadc->Init.ExternalTrigConv != ADC_SOFTWARE_START)
- {
- /* Select external trigger to start conversion */
- hadc->Instance->CR2 &= ~(ADC_CR2_EXTSEL);
- hadc->Instance->CR2 |= hadc->Init.ExternalTrigConv;
-
- /* Select external trigger polarity */
- hadc->Instance->CR2 &= ~(ADC_CR2_EXTEN);
- hadc->Instance->CR2 |= hadc->Init.ExternalTrigConvEdge;
- }
- else
- {
- /* Reset the external trigger */
- hadc->Instance->CR2 &= ~(ADC_CR2_EXTSEL);
- hadc->Instance->CR2 &= ~(ADC_CR2_EXTEN);
- }
-
- /* Enable or disable ADC continuous conversion mode */
- hadc->Instance->CR2 &= ~(ADC_CR2_CONT);
- hadc->Instance->CR2 |= ADC_CR2_CONTINUOUS(hadc->Init.ContinuousConvMode);
-
- if(hadc->Init.DiscontinuousConvMode != DISABLE)
- {
- assert_param(IS_ADC_REGULAR_DISC_NUMBER(hadc->Init.NbrOfDiscConversion));
-
- /* Enable the selected ADC regular discontinuous mode */
- hadc->Instance->CR1 |= (uint32_t)ADC_CR1_DISCEN;
-
- /* Set the number of channels to be converted in discontinuous mode */
- hadc->Instance->CR1 &= ~(ADC_CR1_DISCNUM);
- hadc->Instance->CR1 |= ADC_CR1_DISCONTINUOUS(hadc->Init.NbrOfDiscConversion);
- }
- else
- {
- /* Disable the selected ADC regular discontinuous mode */
- hadc->Instance->CR1 &= ~(ADC_CR1_DISCEN);
- }
-
- /* Set ADC number of conversion */
- hadc->Instance->SQR1 &= ~(ADC_SQR1_L);
- hadc->Instance->SQR1 |= ADC_SQR1(hadc->Init.NbrOfConversion);
-
- /* Enable or disable ADC DMA continuous request */
- hadc->Instance->CR2 &= ~(ADC_CR2_DDS);
- hadc->Instance->CR2 |= ADC_CR2_DMAContReq(hadc->Init.DMAContinuousRequests);
-
- /* Enable or disable ADC end of conversion selection */
- hadc->Instance->CR2 &= ~(ADC_CR2_EOCS);
- hadc->Instance->CR2 |= ADC_CR2_EOCSelection(hadc->Init.EOCSelection);
-}
-
-/**
- * @brief DMA transfer complete callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void ADC_DMAConvCplt(DMA_HandleTypeDef *hdma)
-{
- ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- /* Check if an injected conversion is ready */
- if(hadc->State == HAL_ADC_STATE_EOC_INJ)
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_EOC_INJ_REG;
- }
- else
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_EOC_REG;
- }
-
- HAL_ADC_ConvCpltCallback(hadc);
-}
-
-/**
- * @brief DMA half transfer complete callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void ADC_DMAHalfConvCplt(DMA_HandleTypeDef *hdma)
-{
- ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- /* Conversion complete callback */
- HAL_ADC_ConvHalfCpltCallback(hadc);
-}
-
-/**
- * @brief DMA error callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void ADC_DMAError(DMA_HandleTypeDef *hdma)
-{
- ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- hadc->State= HAL_ADC_STATE_ERROR;
- /* Set ADC error code to DMA error */
- hadc->ErrorCode |= HAL_ADC_ERROR_DMA;
- HAL_ADC_ErrorCallback(hadc);
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_ADC_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c
deleted file mode 100644
index 37a9c4c..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_adc_ex.c
+++ /dev/null
@@ -1,872 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_adc_ex.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief This file provides firmware functions to manage the following
- * functionalities of the ADC extension peripheral:
- * + Extended features functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (#)Initialize the ADC low level resources by implementing the HAL_ADC_MspInit():
- (##) Enable the ADC interface clock using __HAL_RCC_ADC_CLK_ENABLE()
- (##) ADC pins configuration
- (+++) Enable the clock for the ADC GPIOs using the following function:
- __HAL_RCC_GPIOx_CLK_ENABLE()
- (+++) Configure these ADC pins in analog mode using HAL_GPIO_Init()
- (##) In case of using interrupts (e.g. HAL_ADC_Start_IT())
- (+++) Configure the ADC interrupt priority using HAL_NVIC_SetPriority()
- (+++) Enable the ADC IRQ handler using HAL_NVIC_EnableIRQ()
- (+++) In ADC IRQ handler, call HAL_ADC_IRQHandler()
- (##) In case of using DMA to control data transfer (e.g. HAL_ADC_Start_DMA())
- (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE()
- (+++) Configure and enable two DMA streams stream for managing data
- transfer from peripheral to memory (output stream)
- (+++) Associate the initialized DMA handle to the ADC DMA handle
- using __HAL_LINKDMA()
- (+++) Configure the priority and enable the NVIC for the transfer complete
- interrupt on the two DMA Streams. The output stream should have higher
- priority than the input stream.
- (#) Configure the ADC Prescaler, conversion resolution and data alignment
- using the HAL_ADC_Init() function.
-
- (#) Configure the ADC Injected channels group features, use HAL_ADC_Init()
- and HAL_ADC_ConfigChannel() functions.
-
- (#) Three operation modes are available within this driver :
-
- *** Polling mode IO operation ***
- =================================
- [..]
- (+) Start the ADC peripheral using HAL_ADCEx_InjectedStart()
- (+) Wait for end of conversion using HAL_ADC_PollForConversion(), at this stage
- user can specify the value of timeout according to his end application
- (+) To read the ADC converted values, use the HAL_ADCEx_InjectedGetValue() function.
- (+) Stop the ADC peripheral using HAL_ADCEx_InjectedStop()
-
- *** Interrupt mode IO operation ***
- ===================================
- [..]
- (+) Start the ADC peripheral using HAL_ADCEx_InjectedStart_IT()
- (+) Use HAL_ADC_IRQHandler() called under ADC_IRQHandler() Interrupt subroutine
- (+) At ADC end of conversion HAL_ADCEx_InjectedConvCpltCallback() function is executed and user can
- add his own code by customization of function pointer HAL_ADCEx_InjectedConvCpltCallback
- (+) In case of ADC Error, HAL_ADCEx_InjectedErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_ADCEx_InjectedErrorCallback
- (+) Stop the ADC peripheral using HAL_ADCEx_InjectedStop_IT()
-
-
- *** DMA mode IO operation ***
- ==============================
- [..]
- (+) Start the ADC peripheral using HAL_ADCEx_InjectedStart_DMA(), at this stage the user specify the length
- of data to be transferred at each end of conversion
- (+) At The end of data transfer ba HAL_ADCEx_InjectedConvCpltCallback() function is executed and user can
- add his own code by customization of function pointer HAL_ADCEx_InjectedConvCpltCallback
- (+) In case of transfer Error, HAL_ADCEx_InjectedErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_ADCEx_InjectedErrorCallback
- (+) Stop the ADC peripheral using HAL_ADCEx_InjectedStop_DMA()
-
- *** Multi mode ADCs Regular channels configuration ***
- ======================================================
- [..]
- (+) Select the Multi mode ADC regular channels features (dual or triple mode)
- and configure the DMA mode using HAL_ADCEx_MultiModeConfigChannel() functions.
- (+) Start the ADC peripheral using HAL_ADCEx_MultiModeStart_DMA(), at this stage the user specify the length
- of data to be transferred at each end of conversion
- (+) Read the ADCs converted values using the HAL_ADCEx_MultiModeGetValue() function.
-
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup ADCEx ADCEx
- * @brief ADC Extended driver modules
- * @{
- */
-
-#ifdef HAL_ADC_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/** @addtogroup ADCEx_Private_Functions
- * @{
- */
-/* Private function prototypes -----------------------------------------------*/
-static void ADC_MultiModeDMAConvCplt(DMA_HandleTypeDef *hdma);
-static void ADC_MultiModeDMAError(DMA_HandleTypeDef *hdma);
-static void ADC_MultiModeDMAHalfConvCplt(DMA_HandleTypeDef *hdma);
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup ADCEx_Exported_Functions ADC Exported Functions
- * @{
- */
-
-/** @defgroup ADCEx_Exported_Functions_Group1 Extended features functions
- * @brief Extended features functions
- *
-@verbatim
- ===============================================================================
- ##### Extended features functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Start conversion of injected channel.
- (+) Stop conversion of injected channel.
- (+) Start multimode and enable DMA transfer.
- (+) Stop multimode and disable DMA transfer.
- (+) Get result of injected channel conversion.
- (+) Get result of multimode conversion.
- (+) Configure injected channels.
- (+) Configure multimode.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Enables the selected ADC software start conversion of the injected channels.
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc)
-{
- __IO uint32_t counter = 0;
- uint32_t tmp1 = 0, tmp2 = 0;
-
- /* Process locked */
- __HAL_LOCK(hadc);
-
- /* Check if a regular conversion is ongoing */
- if(hadc->State == HAL_ADC_STATE_BUSY_REG)
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_BUSY_INJ_REG;
- }
- else
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_BUSY_INJ;
- }
-
- /* Check if ADC peripheral is disabled in order to enable it and wait during
- Tstab time the ADC's stabilization */
- if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
- {
- /* Enable the Peripheral */
- __HAL_ADC_ENABLE(hadc);
-
- /* Delay for temperature sensor stabilization time */
- /* Compute number of CPU cycles to wait for */
- counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000));
- while(counter != 0)
- {
- counter--;
- }
- }
-
- /* Check if Multimode enabled */
- if(HAL_IS_BIT_CLR(ADC->CCR, ADC_CCR_MULTI))
- {
- tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
- tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
- if(tmp1 && tmp2)
- {
- /* Enable the selected ADC software conversion for injected group */
- hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
- }
- }
- else
- {
- tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
- tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
- if((hadc->Instance == ADC1) && tmp1 && tmp2)
- {
- /* Enable the selected ADC software conversion for injected group */
- hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
- }
- }
-
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Enables the interrupt and starts ADC conversion of injected channels.
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- *
- * @retval HAL status.
- */
-HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc)
-{
- __IO uint32_t counter = 0;
- uint32_t tmp1 = 0, tmp2 =0;
-
- /* Process locked */
- __HAL_LOCK(hadc);
-
- /* Check if a regular conversion is ongoing */
- if(hadc->State == HAL_ADC_STATE_BUSY_REG)
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_BUSY_INJ_REG;
- }
- else
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_BUSY_INJ;
- }
-
- /* Set ADC error code to none */
- hadc->ErrorCode = HAL_ADC_ERROR_NONE;
-
- /* Check if ADC peripheral is disabled in order to enable it and wait during
- Tstab time the ADC's stabilization */
- if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
- {
- /* Enable the Peripheral */
- __HAL_ADC_ENABLE(hadc);
-
- /* Delay for temperature sensor stabilization time */
- /* Compute number of CPU cycles to wait for */
- counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000));
- while(counter != 0)
- {
- counter--;
- }
- }
-
- /* Enable the ADC end of conversion interrupt for injected group */
- __HAL_ADC_ENABLE_IT(hadc, ADC_IT_JEOC);
-
- /* Enable the ADC overrun interrupt */
- __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR);
-
- /* Check if Multimode enabled */
- if(HAL_IS_BIT_CLR(ADC->CCR, ADC_CCR_MULTI))
- {
- tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
- tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
- if(tmp1 && tmp2)
- {
- /* Enable the selected ADC software conversion for injected group */
- hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
- }
- }
- else
- {
- tmp1 = HAL_IS_BIT_CLR(hadc->Instance->CR2, ADC_CR2_JEXTEN);
- tmp2 = HAL_IS_BIT_CLR(hadc->Instance->CR1, ADC_CR1_JAUTO);
- if((hadc->Instance == ADC1) && tmp1 && tmp2)
- {
- /* Enable the selected ADC software conversion for injected group */
- hadc->Instance->CR2 |= ADC_CR2_JSWSTART;
- }
- }
-
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Disables ADC and stop conversion of injected channels.
- *
- * @note Caution: This function will stop also regular channels.
- *
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval HAL status.
- */
-HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc)
-{
- /* Disable the Peripheral */
- __HAL_ADC_DISABLE(hadc);
-
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Poll for injected conversion complete
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @param Timeout: Timeout value in millisecond.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Check End of conversion flag */
- while(!(__HAL_ADC_GET_FLAG(hadc, ADC_FLAG_JEOC)))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- hadc->State= HAL_ADC_STATE_TIMEOUT;
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Check if a regular conversion is ready */
- if(hadc->State == HAL_ADC_STATE_EOC_REG)
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_EOC_INJ_REG;
- }
- else
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_EOC_INJ;
- }
-
- /* Return ADC state */
- return HAL_OK;
-}
-
-/**
- * @brief Disables the interrupt and stop ADC conversion of injected channels.
- *
- * @note Caution: This function will stop also regular channels.
- *
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval HAL status.
- */
-HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc)
-{
- /* Disable the ADC end of conversion interrupt for regular group */
- __HAL_ADC_DISABLE_IT(hadc, ADC_IT_EOC);
-
- /* Disable the ADC end of conversion interrupt for injected group */
- __HAL_ADC_DISABLE_IT(hadc, ADC_CR1_JEOCIE);
-
- /* Enable the Peripheral */
- __HAL_ADC_DISABLE(hadc);
-
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Gets the converted value from data register of injected channel.
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @param InjectedRank: the ADC injected rank.
- * This parameter can be one of the following values:
- * @arg ADC_INJECTED_RANK_1: Injected Channel1 selected
- * @arg ADC_INJECTED_RANK_2: Injected Channel2 selected
- * @arg ADC_INJECTED_RANK_3: Injected Channel3 selected
- * @arg ADC_INJECTED_RANK_4: Injected Channel4 selected
- * @retval None
- */
-uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank)
-{
- __IO uint32_t tmp = 0;
-
- /* Check the parameters */
- assert_param(IS_ADC_INJECTED_RANK(InjectedRank));
-
- /* Clear the ADCx's flag for injected end of conversion */
- __HAL_ADC_CLEAR_FLAG(hadc,ADC_FLAG_JEOC);
-
- /* Return the selected ADC converted value */
- switch(InjectedRank)
- {
- case ADC_INJECTED_RANK_4:
- {
- tmp = hadc->Instance->JDR4;
- }
- break;
- case ADC_INJECTED_RANK_3:
- {
- tmp = hadc->Instance->JDR3;
- }
- break;
- case ADC_INJECTED_RANK_2:
- {
- tmp = hadc->Instance->JDR2;
- }
- break;
- case ADC_INJECTED_RANK_1:
- {
- tmp = hadc->Instance->JDR1;
- }
- break;
- default:
- break;
- }
- return tmp;
-}
-
-/**
- * @brief Enables ADC DMA request after last transfer (Multi-ADC mode) and enables ADC peripheral
- *
- * @note Caution: This function must be used only with the ADC master.
- *
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @param pData: Pointer to buffer in which transferred from ADC peripheral to memory will be stored.
- * @param Length: The length of data to be transferred from ADC peripheral to memory.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length)
-{
- __IO uint32_t counter = 0;
-
- /* Check the parameters */
- assert_param(IS_FUNCTIONAL_STATE(hadc->Init.ContinuousConvMode));
- assert_param(IS_ADC_EXT_TRIG_EDGE(hadc->Init.ExternalTrigConvEdge));
- assert_param(IS_FUNCTIONAL_STATE(hadc->Init.DMAContinuousRequests));
-
- /* Process locked */
- __HAL_LOCK(hadc);
-
- /* Enable ADC overrun interrupt */
- __HAL_ADC_ENABLE_IT(hadc, ADC_IT_OVR);
-
- if (hadc->Init.DMAContinuousRequests != DISABLE)
- {
- /* Enable the selected ADC DMA request after last transfer */
- ADC->CCR |= ADC_CCR_DDS;
- }
- else
- {
- /* Disable the selected ADC EOC rising on each regular channel conversion */
- ADC->CCR &= ~ADC_CCR_DDS;
- }
-
- /* Set the DMA transfer complete callback */
- hadc->DMA_Handle->XferCpltCallback = ADC_MultiModeDMAConvCplt;
-
- /* Set the DMA half transfer complete callback */
- hadc->DMA_Handle->XferHalfCpltCallback = ADC_MultiModeDMAHalfConvCplt;
-
- /* Set the DMA error callback */
- hadc->DMA_Handle->XferErrorCallback = ADC_MultiModeDMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(hadc->DMA_Handle, (uint32_t)&ADC->CDR, (uint32_t)pData, Length);
-
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_BUSY_REG;
-
- /* Check if ADC peripheral is disabled in order to enable it and wait during
- Tstab time the ADC's stabilization */
- if((hadc->Instance->CR2 & ADC_CR2_ADON) != ADC_CR2_ADON)
- {
- /* Enable the Peripheral */
- __HAL_ADC_ENABLE(hadc);
-
- /* Delay for temperature sensor stabilization time */
- /* Compute number of CPU cycles to wait for */
- counter = (ADC_STAB_DELAY_US * (SystemCoreClock / 1000000));
- while(counter != 0)
- {
- counter--;
- }
- }
-
- /* if no external trigger present enable software conversion of regular channels */
- if((hadc->Instance->CR2 & ADC_CR2_EXTEN) == RESET)
- {
- /* Enable the selected ADC software conversion for regular group */
- hadc->Instance->CR2 |= (uint32_t)ADC_CR2_SWSTART;
- }
-
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Disables ADC DMA (multi-ADC mode) and disables ADC peripheral
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc)
-{
- /* Process locked */
- __HAL_LOCK(hadc);
-
- /* Enable the Peripheral */
- __HAL_ADC_DISABLE(hadc);
-
- /* Disable ADC overrun interrupt */
- __HAL_ADC_DISABLE_IT(hadc, ADC_IT_OVR);
-
- /* Disable the selected ADC DMA request after last transfer */
- ADC->CCR &= ~ADC_CCR_DDS;
-
- /* Disable the ADC DMA Stream */
- HAL_DMA_Abort(hadc->DMA_Handle);
-
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Returns the last ADC1, ADC2 and ADC3 regular conversions results
- * data in the selected multi mode.
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval The converted data value.
- */
-uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc)
-{
- /* Return the multi mode conversion value */
- return ADC->CDR;
-}
-
-/**
- * @brief Injected conversion complete callback in non blocking mode
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @retval None
- */
-__weak void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_ADC_InjectedConvCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Configures for the selected ADC injected channel its corresponding
- * rank in the sequencer and its sample time.
- * @param hadc: pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @param sConfigInjected: ADC configuration structure for injected channel.
- * @retval None
- */
-HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc, ADC_InjectionConfTypeDef* sConfigInjected)
-{
-
-#ifdef USE_FULL_ASSERT
- uint32_t tmp = 0;
-#endif /* USE_FULL_ASSERT */
-
- /* Check the parameters */
- assert_param(IS_ADC_CHANNEL(sConfigInjected->InjectedChannel));
- assert_param(IS_ADC_INJECTED_RANK(sConfigInjected->InjectedRank));
- assert_param(IS_ADC_SAMPLE_TIME(sConfigInjected->InjectedSamplingTime));
- assert_param(IS_ADC_EXT_INJEC_TRIG(sConfigInjected->ExternalTrigInjecConv));
- assert_param(IS_ADC_INJECTED_LENGTH(sConfigInjected->InjectedNbrOfConversion));
- assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->AutoInjectedConv));
- assert_param(IS_FUNCTIONAL_STATE(sConfigInjected->InjectedDiscontinuousConvMode));
-
-#ifdef USE_FULL_ASSERT
- tmp = ADC_GET_RESOLUTION(hadc);
- assert_param(IS_ADC_RANGE(tmp, sConfigInjected->InjectedOffset));
-#endif /* USE_FULL_ASSERT */
-
- if(sConfigInjected->ExternalTrigInjecConvEdge != ADC_INJECTED_SOFTWARE_START)
- {
- assert_param(IS_ADC_EXT_INJEC_TRIG_EDGE(sConfigInjected->ExternalTrigInjecConvEdge));
- }
-
- /* Process locked */
- __HAL_LOCK(hadc);
-
- /* if ADC_Channel_10 ... ADC_Channel_18 is selected */
- if (sConfigInjected->InjectedChannel > ADC_CHANNEL_9)
- {
- /* Clear the old sample time */
- hadc->Instance->SMPR1 &= ~ADC_SMPR1(ADC_SMPR1_SMP10, sConfigInjected->InjectedChannel);
-
- /* Set the new sample time */
- hadc->Instance->SMPR1 |= ADC_SMPR1(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel);
- }
- else /* ADC_Channel include in ADC_Channel_[0..9] */
- {
- /* Clear the old sample time */
- hadc->Instance->SMPR2 &= ~ADC_SMPR2(ADC_SMPR2_SMP0, sConfigInjected->InjectedChannel);
-
- /* Set the new sample time */
- hadc->Instance->SMPR2 |= ADC_SMPR2(sConfigInjected->InjectedSamplingTime, sConfigInjected->InjectedChannel);
- }
-
- /*---------------------------- ADCx JSQR Configuration -----------------*/
- hadc->Instance->JSQR &= ~(ADC_JSQR_JL);
- hadc->Instance->JSQR |= ADC_SQR1(sConfigInjected->InjectedNbrOfConversion);
-
- /* Rank configuration */
-
- /* Clear the old SQx bits for the selected rank */
- hadc->Instance->JSQR &= ~ADC_JSQR(ADC_JSQR_JSQ1, sConfigInjected->InjectedRank,sConfigInjected->InjectedNbrOfConversion);
-
- /* Set the SQx bits for the selected rank */
- hadc->Instance->JSQR |= ADC_JSQR(sConfigInjected->InjectedChannel, sConfigInjected->InjectedRank,sConfigInjected->InjectedNbrOfConversion);
-
- /* Enable external trigger if trigger selection is different of software */
- /* start. */
- /* Note: This configuration keeps the hardware feature of parameter */
- /* ExternalTrigConvEdge "trigger edge none" equivalent to */
- /* software start. */
- if(sConfigInjected->ExternalTrigInjecConv != ADC_INJECTED_SOFTWARE_START)
- {
- /* Select external trigger to start conversion */
- hadc->Instance->CR2 &= ~(ADC_CR2_JEXTSEL);
- hadc->Instance->CR2 |= sConfigInjected->ExternalTrigInjecConv;
-
- /* Select external trigger polarity */
- hadc->Instance->CR2 &= ~(ADC_CR2_JEXTEN);
- hadc->Instance->CR2 |= sConfigInjected->ExternalTrigInjecConvEdge;
- }
- else
- {
- /* Reset the external trigger */
- hadc->Instance->CR2 &= ~(ADC_CR2_JEXTSEL);
- hadc->Instance->CR2 &= ~(ADC_CR2_JEXTEN);
- }
-
- if (sConfigInjected->AutoInjectedConv != DISABLE)
- {
- /* Enable the selected ADC automatic injected group conversion */
- hadc->Instance->CR1 |= ADC_CR1_JAUTO;
- }
- else
- {
- /* Disable the selected ADC automatic injected group conversion */
- hadc->Instance->CR1 &= ~(ADC_CR1_JAUTO);
- }
-
- if (sConfigInjected->InjectedDiscontinuousConvMode != DISABLE)
- {
- /* Enable the selected ADC injected discontinuous mode */
- hadc->Instance->CR1 |= ADC_CR1_JDISCEN;
- }
- else
- {
- /* Disable the selected ADC injected discontinuous mode */
- hadc->Instance->CR1 &= ~(ADC_CR1_JDISCEN);
- }
-
- switch(sConfigInjected->InjectedRank)
- {
- case 1:
- /* Set injected channel 1 offset */
- hadc->Instance->JOFR1 &= ~(ADC_JOFR1_JOFFSET1);
- hadc->Instance->JOFR1 |= sConfigInjected->InjectedOffset;
- break;
- case 2:
- /* Set injected channel 2 offset */
- hadc->Instance->JOFR2 &= ~(ADC_JOFR2_JOFFSET2);
- hadc->Instance->JOFR2 |= sConfigInjected->InjectedOffset;
- break;
- case 3:
- /* Set injected channel 3 offset */
- hadc->Instance->JOFR3 &= ~(ADC_JOFR3_JOFFSET3);
- hadc->Instance->JOFR3 |= sConfigInjected->InjectedOffset;
- break;
- default:
- /* Set injected channel 4 offset */
- hadc->Instance->JOFR4 &= ~(ADC_JOFR4_JOFFSET4);
- hadc->Instance->JOFR4 |= sConfigInjected->InjectedOffset;
- break;
- }
-
- /* if ADC1 Channel_18 is selected enable VBAT Channel */
- if ((hadc->Instance == ADC1) && (sConfigInjected->InjectedChannel == ADC_CHANNEL_VBAT))
- {
- /* Enable the VBAT channel*/
- ADC->CCR |= ADC_CCR_VBATE;
- }
-
- /* if ADC1 Channel_16 or Channel_17 is selected enable TSVREFE Channel(Temperature sensor and VREFINT) */
- if ((hadc->Instance == ADC1) && ((sConfigInjected->InjectedChannel == ADC_CHANNEL_TEMPSENSOR) || (sConfigInjected->InjectedChannel == ADC_CHANNEL_VREFINT)))
- {
- /* Enable the TSVREFE channel*/
- ADC->CCR |= ADC_CCR_TSVREFE;
- }
-
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Configures the ADC multi-mode
- * @param hadc : pointer to a ADC_HandleTypeDef structure that contains
- * the configuration information for the specified ADC.
- * @param multimode : pointer to an ADC_MultiModeTypeDef structure that contains
- * the configuration information for multimode.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode)
-{
- /* Check the parameters */
- assert_param(IS_ADC_MODE(multimode->Mode));
- assert_param(IS_ADC_DMA_ACCESS_MODE(multimode->DMAAccessMode));
- assert_param(IS_ADC_SAMPLING_DELAY(multimode->TwoSamplingDelay));
-
- /* Process locked */
- __HAL_LOCK(hadc);
-
- /* Set ADC mode */
- ADC->CCR &= ~(ADC_CCR_MULTI);
- ADC->CCR |= multimode->Mode;
-
- /* Set the ADC DMA access mode */
- ADC->CCR &= ~(ADC_CCR_DMA);
- ADC->CCR |= multimode->DMAAccessMode;
-
- /* Set delay between two sampling phases */
- ADC->CCR &= ~(ADC_CCR_DELAY);
- ADC->CCR |= multimode->TwoSamplingDelay;
-
- /* Process unlocked */
- __HAL_UNLOCK(hadc);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
- /**
- * @brief DMA transfer complete callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void ADC_MultiModeDMAConvCplt(DMA_HandleTypeDef *hdma)
-{
- ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- /* Check if an injected conversion is ready */
- if(hadc->State == HAL_ADC_STATE_EOC_INJ)
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_EOC_INJ_REG;
- }
- else
- {
- /* Change ADC state */
- hadc->State = HAL_ADC_STATE_EOC_REG;
- }
-
- HAL_ADC_ConvCpltCallback(hadc);
-}
-
-/**
- * @brief DMA half transfer complete callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void ADC_MultiModeDMAHalfConvCplt(DMA_HandleTypeDef *hdma)
-{
- ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- /* Conversion complete callback */
- HAL_ADC_ConvHalfCpltCallback(hadc);
-}
-
-/**
- * @brief DMA error callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void ADC_MultiModeDMAError(DMA_HandleTypeDef *hdma)
-{
- ADC_HandleTypeDef* hadc = ( ADC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- hadc->State= HAL_ADC_STATE_ERROR;
- /* Set ADC error code to DMA error */
- hadc->ErrorCode |= HAL_ADC_ERROR_DMA;
- HAL_ADC_ErrorCallback(hadc);
-}
-
-/**
- * @}
- */
-
-#endif /* HAL_ADC_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_can.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_can.c
deleted file mode 100644
index bea728a..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_can.c
+++ /dev/null
@@ -1,1438 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_can.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief This file provides firmware functions to manage the following
- * functionalities of the Controller Area Network (CAN) peripheral:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral Control functions
- * + Peripheral State and Error functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (#) Enable the CAN controller interface clock using
- __HAL_RCC_CAN1_CLK_ENABLE() for CAN1 and __HAL_RCC_CAN2_CLK_ENABLE() for CAN2
- -@- In case you are using CAN2 only, you have to enable the CAN1 clock.
-
- (#) CAN pins configuration
- (++) Enable the clock for the CAN GPIOs using the following function:
- __GPIOx_CLK_ENABLE()
- (++) Connect and configure the involved CAN pins to AF9 using the
- following function HAL_GPIO_Init()
-
- (#) Initialize and configure the CAN using CAN_Init() function.
-
- (#) Transmit the desired CAN frame using HAL_CAN_Transmit() function.
-
- (#) Receive a CAN frame using HAL_CAN_Receive() function.
-
- *** Polling mode IO operation ***
- =================================
- [..]
- (+) Start the CAN peripheral transmission and wait the end of this operation
- using HAL_CAN_Transmit(), at this stage user can specify the value of timeout
- according to his end application
- (+) Start the CAN peripheral reception and wait the end of this operation
- using HAL_CAN_Receive(), at this stage user can specify the value of timeout
- according to his end application
-
- *** Interrupt mode IO operation ***
- ===================================
- [..]
- (+) Start the CAN peripheral transmission using HAL_CAN_Transmit_IT()
- (+) Start the CAN peripheral reception using HAL_CAN_Receive_IT()
- (+) Use HAL_CAN_IRQHandler() called under the used CAN Interrupt subroutine
- (+) At CAN end of transmission HAL_CAN_TxCpltCallback() function is executed and user can
- add his own code by customization of function pointer HAL_CAN_TxCpltCallback
- (+) In case of CAN Error, HAL_CAN_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_CAN_ErrorCallback
-
- *** CAN HAL driver macros list ***
- =============================================
- [..]
- Below the list of most used macros in CAN HAL driver.
-
- (+) __HAL_CAN_ENABLE_IT: Enable the specified CAN interrupts
- (+) __HAL_CAN_DISABLE_IT: Disable the specified CAN interrupts
- (+) __HAL_CAN_GET_IT_SOURCE: Check if the specified CAN interrupt source is enabled or disabled
- (+) __HAL_CAN_CLEAR_FLAG: Clear the CAN's pending flags
- (+) __HAL_CAN_GET_FLAG: Get the selected CAN's flag status
-
- [..]
- (@) You can refer to the CAN HAL driver header file for more useful macros
-
- @endverbatim
-
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup CAN CAN
- * @brief CAN driver modules
- * @{
- */
-
-#ifdef HAL_CAN_MODULE_ENABLED
-
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
- defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
- defined(STM32F446xx)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @addtogroup CAN_Private_Constants
- * @{
- */
-#define CAN_TIMEOUT_VALUE 10
-/**
- * @}
- */
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @addtogroup CAN_Private_Functions
- * @{
- */
-static HAL_StatusTypeDef CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber);
-static HAL_StatusTypeDef CAN_Transmit_IT(CAN_HandleTypeDef* hcan);
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup CAN_Exported_Functions CAN Exported Functions
- * @{
- */
-
-/** @defgroup CAN_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ==============================================================================
- ##### Initialization and de-initialization functions #####
- ==============================================================================
- [..] This section provides functions allowing to:
- (+) Initialize and configure the CAN.
- (+) De-initialize the CAN.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the CAN peripheral according to the specified
- * parameters in the CAN_InitStruct.
- * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
- * the configuration information for the specified CAN.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan)
-{
- uint32_t InitStatus = 3;
- uint32_t tickstart = 0;
-
- /* Check CAN handle */
- if(hcan == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_CAN_ALL_INSTANCE(hcan->Instance));
- assert_param(IS_FUNCTIONAL_STATE(hcan->Init.TTCM));
- assert_param(IS_FUNCTIONAL_STATE(hcan->Init.ABOM));
- assert_param(IS_FUNCTIONAL_STATE(hcan->Init.AWUM));
- assert_param(IS_FUNCTIONAL_STATE(hcan->Init.NART));
- assert_param(IS_FUNCTIONAL_STATE(hcan->Init.RFLM));
- assert_param(IS_FUNCTIONAL_STATE(hcan->Init.TXFP));
- assert_param(IS_CAN_MODE(hcan->Init.Mode));
- assert_param(IS_CAN_SJW(hcan->Init.SJW));
- assert_param(IS_CAN_BS1(hcan->Init.BS1));
- assert_param(IS_CAN_BS2(hcan->Init.BS2));
- assert_param(IS_CAN_PRESCALER(hcan->Init.Prescaler));
-
-
- if(hcan->State == HAL_CAN_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hcan->Lock = HAL_UNLOCKED;
- /* Init the low level hardware */
- HAL_CAN_MspInit(hcan);
- }
-
- /* Initialize the CAN state*/
- hcan->State = HAL_CAN_STATE_BUSY;
-
- /* Exit from sleep mode */
- hcan->Instance->MCR &= (~(uint32_t)CAN_MCR_SLEEP);
-
- /* Request initialisation */
- hcan->Instance->MCR |= CAN_MCR_INRQ ;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait the acknowledge */
- while((hcan->Instance->MSR & CAN_MSR_INAK) != CAN_MSR_INAK)
- {
- if((HAL_GetTick() - tickstart ) > CAN_TIMEOUT_VALUE)
- {
- hcan->State= HAL_CAN_STATE_TIMEOUT;
- /* Process unlocked */
- __HAL_UNLOCK(hcan);
- return HAL_TIMEOUT;
- }
- }
-
- /* Check acknowledge */
- if ((hcan->Instance->MSR & CAN_MSR_INAK) != CAN_MSR_INAK)
- {
- InitStatus = CAN_INITSTATUS_FAILED;
- }
- else
- {
- /* Set the time triggered communication mode */
- if (hcan->Init.TTCM == ENABLE)
- {
- hcan->Instance->MCR |= CAN_MCR_TTCM;
- }
- else
- {
- hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_TTCM;
- }
-
- /* Set the automatic bus-off management */
- if (hcan->Init.ABOM == ENABLE)
- {
- hcan->Instance->MCR |= CAN_MCR_ABOM;
- }
- else
- {
- hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_ABOM;
- }
-
- /* Set the automatic wake-up mode */
- if (hcan->Init.AWUM == ENABLE)
- {
- hcan->Instance->MCR |= CAN_MCR_AWUM;
- }
- else
- {
- hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_AWUM;
- }
-
- /* Set the no automatic retransmission */
- if (hcan->Init.NART == ENABLE)
- {
- hcan->Instance->MCR |= CAN_MCR_NART;
- }
- else
- {
- hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_NART;
- }
-
- /* Set the receive FIFO locked mode */
- if (hcan->Init.RFLM == ENABLE)
- {
- hcan->Instance->MCR |= CAN_MCR_RFLM;
- }
- else
- {
- hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_RFLM;
- }
-
- /* Set the transmit FIFO priority */
- if (hcan->Init.TXFP == ENABLE)
- {
- hcan->Instance->MCR |= CAN_MCR_TXFP;
- }
- else
- {
- hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_TXFP;
- }
-
- /* Set the bit timing register */
- hcan->Instance->BTR = (uint32_t)((uint32_t)hcan->Init.Mode) | \
- ((uint32_t)hcan->Init.SJW) | \
- ((uint32_t)hcan->Init.BS1) | \
- ((uint32_t)hcan->Init.BS2) | \
- ((uint32_t)hcan->Init.Prescaler - 1);
-
- /* Request leave initialisation */
- hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_INRQ;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait the acknowledge */
- while((hcan->Instance->MSR & CAN_MSR_INAK) == CAN_MSR_INAK)
- {
- if((HAL_GetTick() - tickstart ) > CAN_TIMEOUT_VALUE)
- {
- hcan->State= HAL_CAN_STATE_TIMEOUT;
- /* Process unlocked */
- __HAL_UNLOCK(hcan);
- return HAL_TIMEOUT;
- }
- }
-
- /* Check acknowledged */
- if ((hcan->Instance->MSR & CAN_MSR_INAK) == CAN_MSR_INAK)
- {
- InitStatus = CAN_INITSTATUS_FAILED;
- }
- else
- {
- InitStatus = CAN_INITSTATUS_SUCCESS;
- }
- }
-
- if(InitStatus == CAN_INITSTATUS_SUCCESS)
- {
- /* Set CAN error code to none */
- hcan->ErrorCode = HAL_CAN_ERROR_NONE;
-
- /* Initialize the CAN state */
- hcan->State = HAL_CAN_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- /* Initialize the CAN state */
- hcan->State = HAL_CAN_STATE_ERROR;
-
- /* Return function status */
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief Configures the CAN reception filter according to the specified
- * parameters in the CAN_FilterInitStruct.
- * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
- * the configuration information for the specified CAN.
- * @param sFilterConfig: pointer to a CAN_FilterConfTypeDef structure that
- * contains the filter configuration information.
- * @retval None
- */
-HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig)
-{
- uint32_t filternbrbitpos = 0;
-
- /* Check the parameters */
- assert_param(IS_CAN_FILTER_NUMBER(sFilterConfig->FilterNumber));
- assert_param(IS_CAN_FILTER_MODE(sFilterConfig->FilterMode));
- assert_param(IS_CAN_FILTER_SCALE(sFilterConfig->FilterScale));
- assert_param(IS_CAN_FILTER_FIFO(sFilterConfig->FilterFIFOAssignment));
- assert_param(IS_FUNCTIONAL_STATE(sFilterConfig->FilterActivation));
- assert_param(IS_CAN_BANKNUMBER(sFilterConfig->BankNumber));
-
- filternbrbitpos = ((uint32_t)1) << sFilterConfig->FilterNumber;
-
- /* Initialisation mode for the filter */
- CAN1->FMR |= (uint32_t)CAN_FMR_FINIT;
-
- /* Select the start slave bank */
- CAN1->FMR &= ~((uint32_t)CAN_FMR_CAN2SB);
- CAN1->FMR |= (uint32_t)(sFilterConfig->BankNumber << 8);
-
- /* Filter Deactivation */
- CAN1->FA1R &= ~(uint32_t)filternbrbitpos;
-
- /* Filter Scale */
- if (sFilterConfig->FilterScale == CAN_FILTERSCALE_16BIT)
- {
- /* 16-bit scale for the filter */
- CAN1->FS1R &= ~(uint32_t)filternbrbitpos;
-
- /* First 16-bit identifier and First 16-bit mask */
- /* Or First 16-bit identifier and Second 16-bit identifier */
- CAN1->sFilterRegister[sFilterConfig->FilterNumber].FR1 =
- ((0x0000FFFF & (uint32_t)sFilterConfig->FilterMaskIdLow) << 16) |
- (0x0000FFFF & (uint32_t)sFilterConfig->FilterIdLow);
-
- /* Second 16-bit identifier and Second 16-bit mask */
- /* Or Third 16-bit identifier and Fourth 16-bit identifier */
- CAN1->sFilterRegister[sFilterConfig->FilterNumber].FR2 =
- ((0x0000FFFF & (uint32_t)sFilterConfig->FilterMaskIdHigh) << 16) |
- (0x0000FFFF & (uint32_t)sFilterConfig->FilterIdHigh);
- }
-
- if (sFilterConfig->FilterScale == CAN_FILTERSCALE_32BIT)
- {
- /* 32-bit scale for the filter */
- CAN1->FS1R |= filternbrbitpos;
- /* 32-bit identifier or First 32-bit identifier */
- CAN1->sFilterRegister[sFilterConfig->FilterNumber].FR1 =
- ((0x0000FFFF & (uint32_t)sFilterConfig->FilterIdHigh) << 16) |
- (0x0000FFFF & (uint32_t)sFilterConfig->FilterIdLow);
- /* 32-bit mask or Second 32-bit identifier */
- CAN1->sFilterRegister[sFilterConfig->FilterNumber].FR2 =
- ((0x0000FFFF & (uint32_t)sFilterConfig->FilterMaskIdHigh) << 16) |
- (0x0000FFFF & (uint32_t)sFilterConfig->FilterMaskIdLow);
- }
-
- /* Filter Mode */
- if (sFilterConfig->FilterMode == CAN_FILTERMODE_IDMASK)
- {
- /*Id/Mask mode for the filter*/
- CAN1->FM1R &= ~(uint32_t)filternbrbitpos;
- }
- else /* CAN_FilterInitStruct->CAN_FilterMode == CAN_FilterMode_IdList */
- {
- /*Identifier list mode for the filter*/
- CAN1->FM1R |= (uint32_t)filternbrbitpos;
- }
-
- /* Filter FIFO assignment */
- if (sFilterConfig->FilterFIFOAssignment == CAN_FILTER_FIFO0)
- {
- /* FIFO 0 assignation for the filter */
- CAN1->FFA1R &= ~(uint32_t)filternbrbitpos;
- }
-
- if (sFilterConfig->FilterFIFOAssignment == CAN_FILTER_FIFO1)
- {
- /* FIFO 1 assignation for the filter */
- CAN1->FFA1R |= (uint32_t)filternbrbitpos;
- }
-
- /* Filter activation */
- if (sFilterConfig->FilterActivation == ENABLE)
- {
- CAN1->FA1R |= filternbrbitpos;
- }
-
- /* Leave the initialisation mode for the filter */
- CAN1->FMR &= ~((uint32_t)CAN_FMR_FINIT);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Deinitializes the CANx peripheral registers to their default reset values.
- * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
- * the configuration information for the specified CAN.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan)
-{
- /* Check CAN handle */
- if(hcan == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_CAN_ALL_INSTANCE(hcan->Instance));
-
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY;
-
- /* DeInit the low level hardware */
- HAL_CAN_MspDeInit(hcan);
-
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hcan);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CAN MSP.
- * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
- * the configuration information for the specified CAN.
- * @retval None
- */
-__weak void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_CAN_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes the CAN MSP.
- * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
- * the configuration information for the specified CAN.
- * @retval None
- */
-__weak void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_CAN_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup CAN_Exported_Functions_Group2 IO operation functions
- * @brief IO operation functions
- *
-@verbatim
- ==============================================================================
- ##### IO operation functions #####
- ==============================================================================
- [..] This section provides functions allowing to:
- (+) Transmit a CAN frame message.
- (+) Receive a CAN frame message.
- (+) Enter CAN peripheral in sleep mode.
- (+) Wake up the CAN peripheral from sleep mode.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initiates and transmits a CAN frame message.
- * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
- * the configuration information for the specified CAN.
- * @param Timeout: Specify Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef* hcan, uint32_t Timeout)
-{
- uint32_t transmitmailbox = 5;
- uint32_t tickstart = 0;
-
- /* Check the parameters */
- assert_param(IS_CAN_IDTYPE(hcan->pTxMsg->IDE));
- assert_param(IS_CAN_RTR(hcan->pTxMsg->RTR));
- assert_param(IS_CAN_DLC(hcan->pTxMsg->DLC));
-
- /* Process locked */
- __HAL_LOCK(hcan);
-
- if(hcan->State == HAL_CAN_STATE_BUSY_RX)
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
- }
- else
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_TX;
- }
-
- /* Select one empty transmit mailbox */
- if ((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0)
- {
- transmitmailbox = 0;
- }
- else if ((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1)
- {
- transmitmailbox = 1;
- }
- else if ((hcan->Instance->TSR&CAN_TSR_TME2) == CAN_TSR_TME2)
- {
- transmitmailbox = 2;
- }
- else
- {
- transmitmailbox = CAN_TXSTATUS_NOMAILBOX;
- }
-
- if (transmitmailbox != CAN_TXSTATUS_NOMAILBOX)
- {
- /* Set up the Id */
- hcan->Instance->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ;
- if (hcan->pTxMsg->IDE == CAN_ID_STD)
- {
- assert_param(IS_CAN_STDID(hcan->pTxMsg->StdId));
- hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << 21) | \
- hcan->pTxMsg->RTR);
- }
- else
- {
- assert_param(IS_CAN_EXTID(hcan->pTxMsg->ExtId));
- hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << 3) | \
- hcan->pTxMsg->IDE | \
- hcan->pTxMsg->RTR);
- }
-
- /* Set up the DLC */
- hcan->pTxMsg->DLC &= (uint8_t)0x0000000F;
- hcan->Instance->sTxMailBox[transmitmailbox].TDTR &= (uint32_t)0xFFFFFFF0;
- hcan->Instance->sTxMailBox[transmitmailbox].TDTR |= hcan->pTxMsg->DLC;
-
- /* Set up the data field */
- hcan->Instance->sTxMailBox[transmitmailbox].TDLR = (((uint32_t)hcan->pTxMsg->Data[3] << 24) |
- ((uint32_t)hcan->pTxMsg->Data[2] << 16) |
- ((uint32_t)hcan->pTxMsg->Data[1] << 8) |
- ((uint32_t)hcan->pTxMsg->Data[0]));
- hcan->Instance->sTxMailBox[transmitmailbox].TDHR = (((uint32_t)hcan->pTxMsg->Data[7] << 24) |
- ((uint32_t)hcan->pTxMsg->Data[6] << 16) |
- ((uint32_t)hcan->pTxMsg->Data[5] << 8) |
- ((uint32_t)hcan->pTxMsg->Data[4]));
- /* Request transmission */
- hcan->Instance->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Check End of transmission flag */
- while(!(__HAL_CAN_TRANSMIT_STATUS(hcan, transmitmailbox)))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- hcan->State = HAL_CAN_STATE_TIMEOUT;
- /* Process unlocked */
- __HAL_UNLOCK(hcan);
- return HAL_TIMEOUT;
- }
- }
- }
- if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX)
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_RX;
-
- /* Process unlocked */
- __HAL_UNLOCK(hcan);
- }
- else
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hcan);
- }
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_ERROR;
-
- /* Process unlocked */
- __HAL_UNLOCK(hcan);
-
- /* Return function status */
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief Initiates and transmits a CAN frame message.
- * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
- * the configuration information for the specified CAN.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef* hcan)
-{
- uint32_t transmitmailbox = 5;
- uint32_t tmp = 0;
-
- /* Check the parameters */
- assert_param(IS_CAN_IDTYPE(hcan->pTxMsg->IDE));
- assert_param(IS_CAN_RTR(hcan->pTxMsg->RTR));
- assert_param(IS_CAN_DLC(hcan->pTxMsg->DLC));
-
- tmp = hcan->State;
- if((tmp == HAL_CAN_STATE_READY) || (tmp == HAL_CAN_STATE_BUSY_RX))
- {
- /* Process Locked */
- __HAL_LOCK(hcan);
-
- /* Select one empty transmit mailbox */
- if((hcan->Instance->TSR&CAN_TSR_TME0) == CAN_TSR_TME0)
- {
- transmitmailbox = 0;
- }
- else if((hcan->Instance->TSR&CAN_TSR_TME1) == CAN_TSR_TME1)
- {
- transmitmailbox = 1;
- }
- else if((hcan->Instance->TSR&CAN_TSR_TME2) == CAN_TSR_TME2)
- {
- transmitmailbox = 2;
- }
- else
- {
- transmitmailbox = CAN_TXSTATUS_NOMAILBOX;
- }
-
- if(transmitmailbox != CAN_TXSTATUS_NOMAILBOX)
- {
- /* Set up the Id */
- hcan->Instance->sTxMailBox[transmitmailbox].TIR &= CAN_TI0R_TXRQ;
- if(hcan->pTxMsg->IDE == CAN_ID_STD)
- {
- assert_param(IS_CAN_STDID(hcan->pTxMsg->StdId));
- hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->StdId << 21) | \
- hcan->pTxMsg->RTR);
- }
- else
- {
- assert_param(IS_CAN_EXTID(hcan->pTxMsg->ExtId));
- hcan->Instance->sTxMailBox[transmitmailbox].TIR |= ((hcan->pTxMsg->ExtId << 3) | \
- hcan->pTxMsg->IDE | \
- hcan->pTxMsg->RTR);
- }
-
- /* Set up the DLC */
- hcan->pTxMsg->DLC &= (uint8_t)0x0000000F;
- hcan->Instance->sTxMailBox[transmitmailbox].TDTR &= (uint32_t)0xFFFFFFF0;
- hcan->Instance->sTxMailBox[transmitmailbox].TDTR |= hcan->pTxMsg->DLC;
-
- /* Set up the data field */
- hcan->Instance->sTxMailBox[transmitmailbox].TDLR = (((uint32_t)hcan->pTxMsg->Data[3] << 24) |
- ((uint32_t)hcan->pTxMsg->Data[2] << 16) |
- ((uint32_t)hcan->pTxMsg->Data[1] << 8) |
- ((uint32_t)hcan->pTxMsg->Data[0]));
- hcan->Instance->sTxMailBox[transmitmailbox].TDHR = (((uint32_t)hcan->pTxMsg->Data[7] << 24) |
- ((uint32_t)hcan->pTxMsg->Data[6] << 16) |
- ((uint32_t)hcan->pTxMsg->Data[5] << 8) |
- ((uint32_t)hcan->pTxMsg->Data[4]));
-
- if(hcan->State == HAL_CAN_STATE_BUSY_RX)
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
- }
- else
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_TX;
- }
-
- /* Set CAN error code to none */
- hcan->ErrorCode = HAL_CAN_ERROR_NONE;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcan);
-
- /* Enable Error warning Interrupt */
- __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EWG);
-
- /* Enable Error passive Interrupt */
- __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EPV);
-
- /* Enable Bus-off Interrupt */
- __HAL_CAN_ENABLE_IT(hcan, CAN_IT_BOF);
-
- /* Enable Last error code Interrupt */
- __HAL_CAN_ENABLE_IT(hcan, CAN_IT_LEC);
-
- /* Enable Error Interrupt */
- __HAL_CAN_ENABLE_IT(hcan, CAN_IT_ERR);
-
- /* Enable Transmit mailbox empty Interrupt */
- __HAL_CAN_ENABLE_IT(hcan, CAN_IT_TME);
-
- /* Request transmission */
- hcan->Instance->sTxMailBox[transmitmailbox].TIR |= CAN_TI0R_TXRQ;
- }
- }
- else
- {
- return HAL_BUSY;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Receives a correct CAN frame.
- * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
- * the configuration information for the specified CAN.
- * @param FIFONumber: FIFO Number value
- * @param Timeout: Specify Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef* hcan, uint8_t FIFONumber, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Check the parameters */
- assert_param(IS_CAN_FIFO(FIFONumber));
-
- /* Process locked */
- __HAL_LOCK(hcan);
-
- if(hcan->State == HAL_CAN_STATE_BUSY_TX)
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
- }
- else
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_RX;
- }
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Check pending message */
- while(__HAL_CAN_MSG_PENDING(hcan, FIFONumber) == 0)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- hcan->State = HAL_CAN_STATE_TIMEOUT;
- /* Process unlocked */
- __HAL_UNLOCK(hcan);
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Get the Id */
- hcan->pRxMsg->IDE = (uint8_t)0x04 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
- if (hcan->pRxMsg->IDE == CAN_ID_STD)
- {
- hcan->pRxMsg->StdId = (uint32_t)0x000007FF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21);
- }
- else
- {
- hcan->pRxMsg->ExtId = (uint32_t)0x1FFFFFFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3);
- }
-
- hcan->pRxMsg->RTR = (uint8_t)0x02 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
- /* Get the DLC */
- hcan->pRxMsg->DLC = (uint8_t)0x0F & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR;
- /* Get the FMI */
- hcan->pRxMsg->FMI = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8);
- /* Get the data field */
- hcan->pRxMsg->Data[0] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR;
- hcan->pRxMsg->Data[1] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8);
- hcan->pRxMsg->Data[2] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16);
- hcan->pRxMsg->Data[3] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24);
- hcan->pRxMsg->Data[4] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR;
- hcan->pRxMsg->Data[5] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8);
- hcan->pRxMsg->Data[6] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16);
- hcan->pRxMsg->Data[7] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24);
-
- /* Release the FIFO */
- if(FIFONumber == CAN_FIFO0)
- {
- /* Release FIFO0 */
- __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO0);
- }
- else /* FIFONumber == CAN_FIFO1 */
- {
- /* Release FIFO1 */
- __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO1);
- }
-
- if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX)
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_TX;
-
- /* Process unlocked */
- __HAL_UNLOCK(hcan);
- }
- else
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hcan);
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Receives a correct CAN frame.
- * @param hcan: Pointer to a CAN_HandleTypeDef structure that contains
- * the configuration information for the specified CAN.
- * @param FIFONumber: Specify the FIFO number
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber)
-{
- uint32_t tmp = 0;
-
- /* Check the parameters */
- assert_param(IS_CAN_FIFO(FIFONumber));
-
- tmp = hcan->State;
- if((tmp == HAL_CAN_STATE_READY) || (tmp == HAL_CAN_STATE_BUSY_TX))
- {
- /* Process locked */
- __HAL_LOCK(hcan);
-
- if(hcan->State == HAL_CAN_STATE_BUSY_TX)
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_TX_RX;
- }
- else
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_RX;
- }
-
- /* Set CAN error code to none */
- hcan->ErrorCode = HAL_CAN_ERROR_NONE;
-
- /* Enable Error warning Interrupt */
- __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EWG);
-
- /* Enable Error passive Interrupt */
- __HAL_CAN_ENABLE_IT(hcan, CAN_IT_EPV);
-
- /* Enable Bus-off Interrupt */
- __HAL_CAN_ENABLE_IT(hcan, CAN_IT_BOF);
-
- /* Enable Last error code Interrupt */
- __HAL_CAN_ENABLE_IT(hcan, CAN_IT_LEC);
-
- /* Enable Error Interrupt */
- __HAL_CAN_ENABLE_IT(hcan, CAN_IT_ERR);
-
- /* Process unlocked */
- __HAL_UNLOCK(hcan);
-
- if(FIFONumber == CAN_FIFO0)
- {
- /* Enable FIFO 0 message pending Interrupt */
- __HAL_CAN_ENABLE_IT(hcan, CAN_IT_FMP0);
- }
- else
- {
- /* Enable FIFO 1 message pending Interrupt */
- __HAL_CAN_ENABLE_IT(hcan, CAN_IT_FMP1);
- }
-
- }
- else
- {
- return HAL_BUSY;
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Enters the Sleep (low power) mode.
- * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
- * the configuration information for the specified CAN.
- * @retval HAL status.
- */
-HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef* hcan)
-{
- uint32_t tickstart = 0;
-
- /* Process locked */
- __HAL_LOCK(hcan);
-
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY;
-
- /* Request Sleep mode */
- hcan->Instance->MCR = (((hcan->Instance->MCR) & (uint32_t)(~(uint32_t)CAN_MCR_INRQ)) | CAN_MCR_SLEEP);
-
- /* Sleep mode status */
- if ((hcan->Instance->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) != CAN_MSR_SLAK)
- {
- /* Process unlocked */
- __HAL_UNLOCK(hcan);
-
- /* Return function status */
- return HAL_ERROR;
- }
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait the acknowledge */
- while((hcan->Instance->MSR & (CAN_MSR_SLAK|CAN_MSR_INAK)) != CAN_MSR_SLAK)
- {
- if((HAL_GetTick() - tickstart) > CAN_TIMEOUT_VALUE)
- {
- hcan->State = HAL_CAN_STATE_TIMEOUT;
- /* Process unlocked */
- __HAL_UNLOCK(hcan);
- return HAL_TIMEOUT;
- }
- }
-
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hcan);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Wakes up the CAN peripheral from sleep mode, after that the CAN peripheral
- * is in the normal mode.
- * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
- * the configuration information for the specified CAN.
- * @retval HAL status.
- */
-HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef* hcan)
-{
- uint32_t tickstart = 0;
-
- /* Process locked */
- __HAL_LOCK(hcan);
-
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY;
-
- /* Wake up request */
- hcan->Instance->MCR &= ~(uint32_t)CAN_MCR_SLEEP;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Sleep mode status */
- while((hcan->Instance->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)
- {
- if((HAL_GetTick() - tickstart) > CAN_TIMEOUT_VALUE)
- {
- hcan->State= HAL_CAN_STATE_TIMEOUT;
- /* Process unlocked */
- __HAL_UNLOCK(hcan);
- return HAL_TIMEOUT;
- }
- }
- if((hcan->Instance->MSR & CAN_MSR_SLAK) == CAN_MSR_SLAK)
- {
- /* Process unlocked */
- __HAL_UNLOCK(hcan);
-
- /* Return function status */
- return HAL_ERROR;
- }
-
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hcan);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Handles CAN interrupt request
- * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
- * the configuration information for the specified CAN.
- * @retval None
- */
-void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan)
-{
- uint32_t tmp1 = 0, tmp2 = 0, tmp3 = 0;
-
- /* Check End of transmission flag */
- if(__HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_TME))
- {
- tmp1 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_0);
- tmp2 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_1);
- tmp3 = __HAL_CAN_TRANSMIT_STATUS(hcan, CAN_TXMAILBOX_2);
- if(tmp1 || tmp2 || tmp3)
- {
- /* Call transmit function */
- CAN_Transmit_IT(hcan);
- }
- }
-
- tmp1 = __HAL_CAN_MSG_PENDING(hcan, CAN_FIFO0);
- tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FMP0);
- /* Check End of reception flag for FIFO0 */
- if((tmp1 != 0) && tmp2)
- {
- /* Call receive function */
- CAN_Receive_IT(hcan, CAN_FIFO0);
- }
-
- tmp1 = __HAL_CAN_MSG_PENDING(hcan, CAN_FIFO1);
- tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_FMP1);
- /* Check End of reception flag for FIFO1 */
- if((tmp1 != 0) && tmp2)
- {
- /* Call receive function */
- CAN_Receive_IT(hcan, CAN_FIFO1);
- }
-
- tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_EWG);
- tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_EWG);
- tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
- /* Check Error Warning Flag */
- if(tmp1 && tmp2 && tmp3)
- {
- /* Set CAN error code to EWG error */
- hcan->ErrorCode |= HAL_CAN_ERROR_EWG;
- /* Clear Error Warning Flag */
- __HAL_CAN_CLEAR_FLAG(hcan, CAN_FLAG_EWG);
- }
-
- tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_EPV);
- tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_EPV);
- tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
- /* Check Error Passive Flag */
- if(tmp1 && tmp2 && tmp3)
- {
- /* Set CAN error code to EPV error */
- hcan->ErrorCode |= HAL_CAN_ERROR_EPV;
- /* Clear Error Passive Flag */
- __HAL_CAN_CLEAR_FLAG(hcan, CAN_FLAG_EPV);
- }
-
- tmp1 = __HAL_CAN_GET_FLAG(hcan, CAN_FLAG_BOF);
- tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_BOF);
- tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
- /* Check Bus-Off Flag */
- if(tmp1 && tmp2 && tmp3)
- {
- /* Set CAN error code to BOF error */
- hcan->ErrorCode |= HAL_CAN_ERROR_BOF;
- /* Clear Bus-Off Flag */
- __HAL_CAN_CLEAR_FLAG(hcan, CAN_FLAG_BOF);
- }
-
- tmp1 = HAL_IS_BIT_CLR(hcan->Instance->ESR, CAN_ESR_LEC);
- tmp2 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_LEC);
- tmp3 = __HAL_CAN_GET_IT_SOURCE(hcan, CAN_IT_ERR);
- /* Check Last error code Flag */
- if((!tmp1) && tmp2 && tmp3)
- {
- tmp1 = (hcan->Instance->ESR) & CAN_ESR_LEC;
- switch(tmp1)
- {
- case(CAN_ESR_LEC_0):
- /* Set CAN error code to STF error */
- hcan->ErrorCode |= HAL_CAN_ERROR_STF;
- break;
- case(CAN_ESR_LEC_1):
- /* Set CAN error code to FOR error */
- hcan->ErrorCode |= HAL_CAN_ERROR_FOR;
- break;
- case(CAN_ESR_LEC_1 | CAN_ESR_LEC_0):
- /* Set CAN error code to ACK error */
- hcan->ErrorCode |= HAL_CAN_ERROR_ACK;
- break;
- case(CAN_ESR_LEC_2):
- /* Set CAN error code to BR error */
- hcan->ErrorCode |= HAL_CAN_ERROR_BR;
- break;
- case(CAN_ESR_LEC_2 | CAN_ESR_LEC_0):
- /* Set CAN error code to BD error */
- hcan->ErrorCode |= HAL_CAN_ERROR_BD;
- break;
- case(CAN_ESR_LEC_2 | CAN_ESR_LEC_1):
- /* Set CAN error code to CRC error */
- hcan->ErrorCode |= HAL_CAN_ERROR_CRC;
- break;
- default:
- break;
- }
-
- /* Clear Last error code Flag */
- hcan->Instance->ESR &= ~(CAN_ESR_LEC);
- }
-
- /* Call the Error call Back in case of Errors */
- if(hcan->ErrorCode != HAL_CAN_ERROR_NONE)
- {
- /* Set the CAN state ready to be able to start again the process */
- hcan->State = HAL_CAN_STATE_READY;
- /* Call Error callback function */
- HAL_CAN_ErrorCallback(hcan);
- }
-}
-
-/**
- * @brief Transmission complete callback in non blocking mode
- * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
- * the configuration information for the specified CAN.
- * @retval None
- */
-__weak void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_CAN_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Transmission complete callback in non blocking mode
- * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
- * the configuration information for the specified CAN.
- * @retval None
- */
-__weak void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_CAN_RxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Error CAN callback.
- * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
- * the configuration information for the specified CAN.
- * @retval None
- */
-__weak void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_CAN_ErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup CAN_Exported_Functions_Group3 Peripheral State and Error functions
- * @brief CAN Peripheral State functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral State and Error functions #####
- ==============================================================================
- [..]
- This subsection provides functions allowing to :
- (+) Check the CAN state.
- (+) Check CAN Errors detected during interrupt process
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief return the CAN state
- * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
- * the configuration information for the specified CAN.
- * @retval HAL state
- */
-HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan)
-{
- /* Return CAN state */
- return hcan->State;
-}
-
-/**
- * @brief Return the CAN error code
- * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
- * the configuration information for the specified CAN.
- * @retval CAN Error Code
- */
-uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan)
-{
- return hcan->ErrorCode;
-}
-
-/**
- * @}
- */
-/**
- * @brief Initiates and transmits a CAN frame message.
- * @param hcan: pointer to a CAN_HandleTypeDef structure that contains
- * the configuration information for the specified CAN.
- * @retval HAL status
- */
-static HAL_StatusTypeDef CAN_Transmit_IT(CAN_HandleTypeDef* hcan)
-{
- /* Disable Transmit mailbox empty Interrupt */
- __HAL_CAN_DISABLE_IT(hcan, CAN_IT_TME);
-
- if(hcan->State == HAL_CAN_STATE_BUSY_TX)
- {
- /* Disable Error warning Interrupt */
- __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG);
-
- /* Disable Error passive Interrupt */
- __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EPV);
-
- /* Disable Bus-off Interrupt */
- __HAL_CAN_DISABLE_IT(hcan, CAN_IT_BOF);
-
- /* Disable Last error code Interrupt */
- __HAL_CAN_DISABLE_IT(hcan, CAN_IT_LEC);
-
- /* Disable Error Interrupt */
- __HAL_CAN_DISABLE_IT(hcan, CAN_IT_ERR);
- }
-
- if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX)
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_RX;
- }
- else
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_READY;
- }
-
- /* Transmission complete callback */
- HAL_CAN_TxCpltCallback(hcan);
-
- return HAL_OK;
-}
-
-/**
- * @brief Receives a correct CAN frame.
- * @param hcan: Pointer to a CAN_HandleTypeDef structure that contains
- * the configuration information for the specified CAN.
- * @param FIFONumber: Specify the FIFO number
- * @retval HAL status
- * @retval None
- */
-static HAL_StatusTypeDef CAN_Receive_IT(CAN_HandleTypeDef* hcan, uint8_t FIFONumber)
-{
- /* Get the Id */
- hcan->pRxMsg->IDE = (uint8_t)0x04 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
- if (hcan->pRxMsg->IDE == CAN_ID_STD)
- {
- hcan->pRxMsg->StdId = (uint32_t)0x000007FF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 21);
- }
- else
- {
- hcan->pRxMsg->ExtId = (uint32_t)0x1FFFFFFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RIR >> 3);
- }
-
- hcan->pRxMsg->RTR = (uint8_t)0x02 & hcan->Instance->sFIFOMailBox[FIFONumber].RIR;
- /* Get the DLC */
- hcan->pRxMsg->DLC = (uint8_t)0x0F & hcan->Instance->sFIFOMailBox[FIFONumber].RDTR;
- /* Get the FMI */
- hcan->pRxMsg->FMI = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDTR >> 8);
- /* Get the data field */
- hcan->pRxMsg->Data[0] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDLR;
- hcan->pRxMsg->Data[1] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 8);
- hcan->pRxMsg->Data[2] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 16);
- hcan->pRxMsg->Data[3] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDLR >> 24);
- hcan->pRxMsg->Data[4] = (uint8_t)0xFF & hcan->Instance->sFIFOMailBox[FIFONumber].RDHR;
- hcan->pRxMsg->Data[5] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 8);
- hcan->pRxMsg->Data[6] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 16);
- hcan->pRxMsg->Data[7] = (uint8_t)0xFF & (hcan->Instance->sFIFOMailBox[FIFONumber].RDHR >> 24);
- /* Release the FIFO */
- /* Release FIFO0 */
- if (FIFONumber == CAN_FIFO0)
- {
- __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO0);
-
- /* Disable FIFO 0 message pending Interrupt */
- __HAL_CAN_DISABLE_IT(hcan, CAN_IT_FMP0);
- }
- /* Release FIFO1 */
- else /* FIFONumber == CAN_FIFO1 */
- {
- __HAL_CAN_FIFO_RELEASE(hcan, CAN_FIFO1);
-
- /* Disable FIFO 1 message pending Interrupt */
- __HAL_CAN_DISABLE_IT(hcan, CAN_IT_FMP1);
- }
-
- if(hcan->State == HAL_CAN_STATE_BUSY_RX)
- {
- /* Disable Error warning Interrupt */
- __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EWG);
-
- /* Disable Error passive Interrupt */
- __HAL_CAN_DISABLE_IT(hcan, CAN_IT_EPV);
-
- /* Disable Bus-off Interrupt */
- __HAL_CAN_DISABLE_IT(hcan, CAN_IT_BOF);
-
- /* Disable Last error code Interrupt */
- __HAL_CAN_DISABLE_IT(hcan, CAN_IT_LEC);
-
- /* Disable Error Interrupt */
- __HAL_CAN_DISABLE_IT(hcan, CAN_IT_ERR);
- }
-
- if(hcan->State == HAL_CAN_STATE_BUSY_TX_RX)
- {
- /* Disable CAN state */
- hcan->State = HAL_CAN_STATE_BUSY_TX;
- }
- else
- {
- /* Change CAN state */
- hcan->State = HAL_CAN_STATE_READY;
- }
-
- /* Receive complete callback */
- HAL_CAN_RxCpltCallback(hcan);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
-
-#endif /* HAL_CAN_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cec.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cec.c
deleted file mode 100644
index 005cd00..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cec.c
+++ /dev/null
@@ -1,1112 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_cec.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief CEC HAL module driver.
- *
- * This file provides firmware functions to manage the following
- * functionalities of the High Definition Multimedia Interface
- * Consumer Electronics Control Peripheral (CEC).
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral Control functions
- *
- *
- @verbatim
- ===============================================================================
- ##### How to use this driver #####
- ===============================================================================
- [..]
- The CEC HAL driver can be used as follow:
-
- (#) Declare a CEC_HandleTypeDef handle structure.
- (#) Initialize the CEC low level resources by implementing the HAL_CEC_MspInit ()API:
- (##) Enable the CEC interface clock.
- (##) CEC pins configuration:
- (+) Enable the clock for the CEC GPIOs.
- (+) Configure these CEC pins as alternate function pull-up.
- (##) NVIC configuration if you need to use interrupt process (HAL_CEC_Transmit_IT()
- and HAL_CEC_Receive_IT() APIs):
- (+) Configure the CEC interrupt priority.
- (+) Enable the NVIC CEC IRQ handle.
- (@) The specific CEC interrupts (Transmission complete interrupt,
- RXNE interrupt and Error Interrupts) will be managed using the macros
- __HAL_CEC_ENABLE_IT() and __HAL_CEC_DISABLE_IT() inside the transmit
- and receive process.
-
- (#) Program the Signal Free Time (SFT) and SFT option, Tolerance, reception stop in
- in case of Bit Rising Error, Error-Bit generation conditions, device logical
- address and Listen mode in the hcec Init structure.
-
- (#) Initialize the CEC registers by calling the HAL_CEC_Init() API.
-
- (@) This API (HAL_CEC_Init()) configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
- by calling the customed HAL_CEC_MspInit() API.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup CEC CEC
- * @brief HAL CEC module driver
- * @{
- */
-#ifdef HAL_CEC_MODULE_ENABLED
-
-#if defined(STM32F446xx)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @defgroup CEC_Private_Constants CEC Private Constants
- * @{
- */
-#define CEC_CFGR_FIELDS (CEC_CFGR_SFT | CEC_CFGR_RXTOL | CEC_CFGR_BRESTP \
- | CEC_CFGR_BREGEN | CEC_CFGR_LBPEGEN | CEC_CFGR_SFTOPT \
- | CEC_CFGR_BRDNOGEN | CEC_CFGR_OAR | CEC_CFGR_LSTN)
-/**
- * @}
- */
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @defgroup CEC_Private_Functions CEC Private Functions
- * @{
- */
-static HAL_StatusTypeDef CEC_Transmit_IT(CEC_HandleTypeDef *hcec);
-static HAL_StatusTypeDef CEC_Receive_IT(CEC_HandleTypeDef *hcec);
-/**
- * @}
- */
-
-/* Exported functions ---------------------------------------------------------*/
-/** @defgroup CEC_Exported_Functions CEC Exported Functions
- * @{
- */
-
-/** @defgroup CEC_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
-===============================================================================
- ##### Initialization and Configuration functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to initialize the CEC
- (+) The following parameters need to be configured:
- (++) SignalFreeTime
- (++) Tolerance
- (++) BRERxStop (RX stopped or not upon Bit Rising Error)
- (++) BREErrorBitGen (Error-Bit generation in case of Bit Rising Error)
- (++) LBPEErrorBitGen (Error-Bit generation in case of Long Bit Period Error)
- (++) BroadcastMsgNoErrorBitGen (Error-bit generation in case of broadcast message error)
- (++) SignalFreeTimeOption (SFT Timer start definition)
- (++) OwnAddress (CEC device address)
- (++) ListenMode
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the CEC mode according to the specified
- * parameters in the CEC_InitTypeDef and creates the associated handle .
- * @param hcec: CEC handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec)
-{
- uint32_t tmpreg = 0x0;
-
- /* Check the CEC handle allocation */
- if(hcec == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_CEC_ALL_INSTANCE(hcec->Instance));
- assert_param(IS_CEC_SIGNALFREETIME(hcec->Init.SignalFreeTime));
- assert_param(IS_CEC_TOLERANCE(hcec->Init.Tolerance));
- assert_param(IS_CEC_BRERXSTOP(hcec->Init.BRERxStop));
- assert_param(IS_CEC_BREERRORBITGEN(hcec->Init.BREErrorBitGen));
- assert_param(IS_CEC_LBPEERRORBITGEN(hcec->Init.LBPEErrorBitGen));
- assert_param(IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(hcec->Init.BroadcastMsgNoErrorBitGen));
- assert_param(IS_CEC_SFTOP(hcec->Init.SignalFreeTimeOption));
- assert_param(IS_CEC_OAR_ADDRESS(hcec->Init.OwnAddress));
- assert_param(IS_CEC_LISTENING_MODE(hcec->Init.ListenMode));
- assert_param(IS_CEC_ADDRESS(hcec->Init.InitiatorAddress));
-
-
- if(hcec->State == HAL_CEC_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hcec->Lock = HAL_UNLOCKED;
- /* Init the low level hardware : GPIO, CLOCK */
- HAL_CEC_MspInit(hcec);
- }
-
- hcec->State = HAL_CEC_STATE_BUSY;
-
- /* Disable the Peripheral */
- __HAL_CEC_DISABLE(hcec);
-
- tmpreg = hcec->Init.SignalFreeTime;
- tmpreg |= hcec->Init.Tolerance;
- tmpreg |= hcec->Init.BRERxStop;
- tmpreg |= hcec->Init.BREErrorBitGen;
- tmpreg |= hcec->Init.LBPEErrorBitGen;
- tmpreg |= hcec->Init.BroadcastMsgNoErrorBitGen;
- tmpreg |= hcec->Init.SignalFreeTimeOption;
- tmpreg |= (hcec->Init.OwnAddress << CEC_CFGR_OAR_LSB_POS);
- tmpreg |= hcec->Init.ListenMode;
-
- /* Write to CEC Control Register */
- MODIFY_REG(hcec->Instance->CFGR, CEC_CFGR_FIELDS, tmpreg);
-
- /* Enable the Peripheral */
- __HAL_CEC_ENABLE(hcec);
-
- hcec->State = HAL_CEC_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the CEC peripheral
- * @param hcec: CEC handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec)
-{
- /* Check the CEC handle allocation */
- if(hcec == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_CEC_ALL_INSTANCE(hcec->Instance));
-
- hcec->State = HAL_CEC_STATE_BUSY;
-
- /* DeInit the low level hardware */
- HAL_CEC_MspDeInit(hcec);
- /* Disable the Peripheral */
- __HAL_CEC_DISABLE(hcec);
-
- hcec->ErrorCode = HAL_CEC_ERROR_NONE;
- hcec->State = HAL_CEC_STATE_RESET;
-
- /* Process Unlock */
- __HAL_UNLOCK(hcec);
-
- return HAL_OK;
-}
-
-/**
- * @brief CEC MSP Init
- * @param hcec: CEC handle
- * @retval None
- */
- __weak void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec)
-{
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_CEC_MspInit can be implemented in the user file
- */
-}
-
-/**
- * @brief CEC MSP DeInit
- * @param hcec: CEC handle
- * @retval None
- */
- __weak void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec)
-{
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_CEC_MspDeInit can be implemented in the user file
- */
-}
-/**
- * @}
- */
-
-/** @defgroup CEC_Exported_Functions_Group2 Input and Output operation functions
- * @brief CEC Transmit/Receive functions
- *
-@verbatim
- ===============================================================================
- ##### I/O operation functions #####
- ===============================================================================
- This subsection provides a set of functions allowing to manage the CEC data transfers.
-
- (#) The CEC handle must contain the initiator (TX side) and the destination (RX side)
- logical addresses (4-bit long addresses, 0xF for broadcast messages destination)
-
- (#) There are two mode of transfer:
- (+) Blocking mode: The communication is performed in polling mode.
- The HAL status of all data processing is returned by the same function
- after finishing transfer.
- (+) No-Blocking mode: The communication is performed using Interrupts.
- These API's return the HAL status.
- The end of the data processing will be indicated through the
- dedicated CEC IRQ when using Interrupt mode.
- The HAL_CEC_TxCpltCallback(), HAL_CEC_RxCpltCallback() user callbacks
- will be executed respectivelly at the end of the transmit or Receive process
- The HAL_CEC_ErrorCallback()user callback will be executed when a communication
- error is detected
-
- (#) Blocking mode API's are :
- (+) HAL_CEC_Transmit()
- (+) HAL_CEC_Receive()
-
- (#) Non-Blocking mode API's with Interrupt are :
- (+) HAL_CEC_Transmit_IT()
- (+) HAL_CEC_Receive_IT()
- (+) HAL_CEC_IRQHandler()
-
- (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode:
- (+) HAL_CEC_TxCpltCallback()
- (+) HAL_CEC_RxCpltCallback()
- (+) HAL_CEC_ErrorCallback()
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Send data in blocking mode
- * @param hcec: CEC handle
- * @param DestinationAddress: destination logical address
- * @param pData: pointer to input byte data buffer
- * @param Size: amount of data to be sent in bytes (without counting the header).
- * 0 means only the header is sent (ping operation).
- * Maximum TX size is 15 bytes (1 opcode and up to 14 operands).
- * @param Timeout: Timeout duration.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CEC_Transmit(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size, uint32_t Timeout)
-{
- uint8_t temp = 0;
- uint32_t tempisr = 0;
- uint32_t tickstart = 0;
-
- if((hcec->State == HAL_CEC_STATE_READY) && (__HAL_CEC_GET_TRANSMISSION_START_FLAG(hcec) == RESET))
- {
- hcec->ErrorCode = HAL_CEC_ERROR_NONE;
- if((pData == NULL ) && (Size > 0))
- {
- hcec->State = HAL_CEC_STATE_ERROR;
- return HAL_ERROR;
- }
-
- assert_param(IS_CEC_ADDRESS(DestinationAddress));
- assert_param(IS_CEC_MSGSIZE(Size));
-
- /* Process Locked */
- __HAL_LOCK(hcec);
-
- hcec->State = HAL_CEC_STATE_BUSY_TX;
-
- hcec->TxXferCount = Size;
-
- /* case no data to be sent, sender is only pinging the system */
- if (Size == 0)
- {
- /* Set TX End of Message (TXEOM) bit, must be set before writing data to TXDR */
- __HAL_CEC_LAST_BYTE_TX_SET(hcec);
- }
-
- /* send header block */
- temp = ((uint32_t)hcec->Init.InitiatorAddress << CEC_INITIATOR_LSB_POS) | DestinationAddress;
- hcec->Instance->TXDR = temp;
- /* Set TX Start of Message (TXSOM) bit */
- __HAL_CEC_FIRST_BYTE_TX_SET(hcec);
-
- while (hcec->TxXferCount > 0)
- {
- hcec->TxXferCount--;
-
- tickstart = HAL_GetTick();
- while(HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_FLAG_TXBR))
- {
- if(Timeout != HAL_MAX_DELAY)
- {
- if((HAL_GetTick() - tickstart) > Timeout)
- {
- hcec->State = HAL_CEC_STATE_TIMEOUT;
- /* Process Unlocked */
- __HAL_UNLOCK(hcec);
- return HAL_TIMEOUT;
- }
- }
-
- /* check whether error occured while waiting for TXBR to be set:
- * has Tx underrun occurred ?
- * has Tx error occurred ?
- * has Tx Missing Acknowledge error occurred ?
- * has Arbitration Loss error occurred ? */
- tempisr = hcec->Instance->ISR;
- if ((tempisr & (CEC_FLAG_TXUDR|CEC_FLAG_TXERR|CEC_FLAG_TXACKE|CEC_FLAG_ARBLST)) != 0)
- {
- /* copy ISR for error handling purposes */
- hcec->ErrorCode = tempisr;
- /* clear all error flags by default */
- __HAL_CEC_CLEAR_FLAG(hcec, (CEC_FLAG_TXUDR|CEC_FLAG_TXERR|CEC_FLAG_TXACKE|CEC_FLAG_ARBLST));
- hcec->State = HAL_CEC_STATE_ERROR;
- __HAL_UNLOCK(hcec);
- return HAL_ERROR;
- }
- }
- /* TXBR to clear BEFORE writing TXDR register */
- __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXBR);
- if (hcec->TxXferCount == 0)
- {
- /* if last byte transmission, set TX End of Message (TXEOM) bit */
- __HAL_CEC_LAST_BYTE_TX_SET(hcec);
- }
- hcec->Instance->TXDR = *pData++;
-
- /* error check after TX byte write up */
- tempisr = hcec->Instance->ISR;
- if ((tempisr & (CEC_FLAG_TXUDR|CEC_FLAG_TXERR|CEC_FLAG_TXACKE|CEC_FLAG_ARBLST)) != 0)
- {
- /* copy ISR for error handling purposes */
- hcec->ErrorCode = tempisr;
- /* clear all error flags by default */
- __HAL_CEC_CLEAR_FLAG(hcec, (CEC_FLAG_TXUDR|CEC_FLAG_TXERR|CEC_FLAG_TXACKE|CEC_FLAG_ARBLST));
- hcec->State = HAL_CEC_STATE_ERROR;
- __HAL_UNLOCK(hcec);
- return HAL_ERROR;
- }
- } /* end while (while (hcec->TxXferCount > 0)) */
-
-
- /* if no error up to this point, check that transmission is
- * complete, that is wait until TXEOM is reset */
- tickstart = HAL_GetTick();
-
- while (HAL_IS_BIT_SET(hcec->Instance->CR, CEC_CR_TXEOM))
- {
- if(Timeout != HAL_MAX_DELAY)
- {
- if((HAL_GetTick() - tickstart) > Timeout)
- {
- hcec->State = HAL_CEC_STATE_ERROR;
- __HAL_UNLOCK(hcec);
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Final error check once all bytes have been transmitted */
- tempisr = hcec->Instance->ISR;
- if ((tempisr & (CEC_FLAG_TXUDR|CEC_FLAG_TXERR|CEC_FLAG_TXACKE)) != 0)
- {
- /* copy ISR for error handling purposes */
- hcec->ErrorCode = tempisr;
- /* clear all error flags by default */
- __HAL_CEC_CLEAR_FLAG(hcec, (CEC_FLAG_TXUDR|CEC_FLAG_TXERR|CEC_FLAG_TXACKE));
- hcec->State = HAL_CEC_STATE_ERROR;
- __HAL_UNLOCK(hcec);
- return HAL_ERROR;
- }
-
- hcec->State = HAL_CEC_STATE_READY;
- __HAL_UNLOCK(hcec);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive data in blocking mode. Must be invoked when RXBR has been set.
- * @param hcec: CEC handle
- * @param pData: pointer to received data buffer.
- * @param Timeout: Timeout duration.
- * Note that the received data size is not known beforehand, the latter is known
- * when the reception is complete and is stored in hcec->RxXferSize.
- * hcec->RxXferSize is the sum of opcodes + operands (0 to 14 operands max).
- * If only a header is received, hcec->RxXferSize = 0
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CEC_Receive(CEC_HandleTypeDef *hcec, uint8_t *pData, uint32_t Timeout)
-{
- uint32_t temp;
- uint32_t tickstart = 0;
-
- if (hcec->State == HAL_CEC_STATE_READY)
- {
- hcec->ErrorCode = HAL_CEC_ERROR_NONE;
- if (pData == NULL )
- {
- hcec->State = HAL_CEC_STATE_ERROR;
- return HAL_ERROR;
- }
-
- hcec->RxXferSize = 0;
- /* Process Locked */
- __HAL_LOCK(hcec);
-
-
- /* Rx loop until CEC_ISR_RXEND is set */
- while (HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_FLAG_RXEND))
- {
- tickstart = HAL_GetTick();
- /* Wait for next byte to be received */
- while (HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_FLAG_RXBR))
- {
- if(Timeout != HAL_MAX_DELAY)
- {
- if((HAL_GetTick() - tickstart) > Timeout)
- {
- hcec->State = HAL_CEC_STATE_TIMEOUT;
- __HAL_UNLOCK(hcec);
- return HAL_TIMEOUT;
- }
- }
- /* any error so far ?
- * has Rx Missing Acknowledge occurred ?
- * has Rx Long Bit Period error occurred ?
- * has Rx Short Bit Period error occurred ?
- * has Rx Bit Rising error occurred ?
- * has Rx Overrun error occurred ? */
- temp = (uint32_t) (hcec->Instance->ISR);
- if ((temp & (CEC_FLAG_RXACKE|CEC_FLAG_LBPE|CEC_FLAG_SBPE|CEC_FLAG_BRE|CEC_FLAG_RXOVR)) != 0)
- {
- /* copy ISR for error handling purposes */
- hcec->ErrorCode = temp;
- /* clear all error flags by default */
- __HAL_CEC_CLEAR_FLAG(hcec,(CEC_FLAG_RXACKE|CEC_FLAG_LBPE|CEC_FLAG_SBPE|CEC_FLAG_BRE|CEC_FLAG_RXOVR));
- hcec->State = HAL_CEC_STATE_ERROR;
- __HAL_UNLOCK(hcec);
- return HAL_ERROR;
- }
- } /* while (HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_ISR_RXBR)) */
-
-
- /* read received data */
- *pData++ = hcec->Instance->RXDR;
- temp = (uint32_t) (hcec->Instance->ISR);
- /* end of message ? */
- if ((temp & CEC_ISR_RXEND) != 0)
- {
- assert_param(IS_CEC_MSGSIZE(hcec->RxXferSize));
- __HAL_CEC_CLEAR_FLAG(hcec,CEC_FLAG_RXEND);
- hcec->State = HAL_CEC_STATE_READY;
- __HAL_UNLOCK(hcec);
- return HAL_OK;
- }
-
- /* clear Rx-Byte Received flag */
- __HAL_CEC_CLEAR_FLAG(hcec,CEC_FLAG_RXBR);
- /* increment payload byte counter */
- hcec->RxXferSize++;
- } /* while (HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_ISR_RXEND)) */
-
- /* if the instructions below are executed, it means RXEND was set when RXBR was
- * set for the first time:
- * the code within the "while (HAL_IS_BIT_CLR(hcec->Instance->ISR, CEC_ISR_RXEND))"
- * loop has not been executed and this means a single byte has been sent */
- *pData++ = hcec->Instance->RXDR;
- /* only one header is received: RxXferSize is set to 0 (no operand, no opcode) */
- hcec->RxXferSize = 0;
- __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXEND);
-
- hcec->State = HAL_CEC_STATE_READY;
- __HAL_UNLOCK(hcec);
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Send data in interrupt mode
- * @param hcec: CEC handle
- * @param DestinationAddress: destination logical address
- * @param pData: pointer to input byte data buffer
- * @param Size: amount of data to be sent in bytes (without counting the header).
- * 0 means only the header is sent (ping operation).
- * Maximum TX size is 15 bytes (1 opcode and up to 14 operands).
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size)
-{
- uint8_t temp = 0;
- /* if the IP isn't already busy and if there is no previous transmission
- already pending due to arbitration lost */
- if (((hcec->State == HAL_CEC_STATE_READY) || (hcec->State == HAL_CEC_STATE_STANDBY_RX))
- && (__HAL_CEC_GET_TRANSMISSION_START_FLAG(hcec) == RESET))
- {
- if((pData == NULL) && (Size > 0))
- {
- hcec->State = HAL_CEC_STATE_ERROR;
- return HAL_ERROR;
- }
-
- assert_param(IS_CEC_ADDRESS(DestinationAddress));
- assert_param(IS_CEC_MSGSIZE(Size));
-
- /* Process Locked */
- __HAL_LOCK(hcec);
- hcec->pTxBuffPtr = pData;
- hcec->State = HAL_CEC_STATE_BUSY_TX;
- hcec->ErrorCode = HAL_CEC_ERROR_NONE;
-
- /* Disable Peripheral to write CEC_IER register */
- __HAL_CEC_DISABLE(hcec);
-
- /* Enable the following two CEC Transmission interrupts as
- * well as the following CEC Transmission Errors interrupts:
- * Tx Byte Request IT
- * End of Transmission IT
- * Tx Missing Acknowledge IT
- * Tx-Error IT
- * Tx-Buffer Underrun IT
- * Tx arbitration lost */
- __HAL_CEC_ENABLE_IT(hcec, CEC_IT_TXBR|CEC_IT_TXEND|CEC_IER_TX_ALL_ERR);
-
- /* Enable the Peripheral */
- __HAL_CEC_ENABLE(hcec);
-
- /* initialize the number of bytes to send,
- * 0 means only one header is sent (ping operation) */
- hcec->TxXferCount = Size;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcec);
-
- /* in case of no payload (Size = 0), sender is only pinging the system;
- * Set TX End of Message (TXEOM) bit, must be set before writing data to TXDR */
- if (Size == 0)
- {
- __HAL_CEC_LAST_BYTE_TX_SET(hcec);
- }
-
- /* send header block */
- temp = (uint8_t)((uint32_t)(hcec->Init.InitiatorAddress) << CEC_INITIATOR_LSB_POS) | DestinationAddress;
- hcec->Instance->TXDR = temp;
- /* Set TX Start of Message (TXSOM) bit */
- __HAL_CEC_FIRST_BYTE_TX_SET(hcec);
-
- return HAL_OK;
- }
- /* if the IP is already busy or if there is a previous transmission
- already pending due to arbitration loss */
- else if ((hcec->State == HAL_CEC_STATE_BUSY_TX)
- || (__HAL_CEC_GET_TRANSMISSION_START_FLAG(hcec) != RESET))
- {
- __HAL_LOCK(hcec);
- /* set state to BUSY TX, in case it wasn't set already (case
- * of transmission new attempt after arbitration loss) */
- if (hcec->State != HAL_CEC_STATE_BUSY_TX)
- {
- hcec->State = HAL_CEC_STATE_BUSY_TX;
- }
-
- /* if all data have been sent */
- if(hcec->TxXferCount == 0)
- {
- /* Disable Peripheral to write CEC_IER register */
- __HAL_CEC_DISABLE(hcec);
-
- /* Disable the CEC Transmission Interrupts */
- __HAL_CEC_DISABLE_IT(hcec, CEC_IT_TXBR|CEC_IT_TXEND);
- /* Disable the CEC Transmission Error Interrupts */
- __HAL_CEC_DISABLE_IT(hcec, CEC_IER_TX_ALL_ERR);
-
- /* Enable the Peripheral */
- __HAL_CEC_ENABLE(hcec);
-
- __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXBR|CEC_FLAG_TXEND);
-
- hcec->State = HAL_CEC_STATE_READY;
- /* Call the Process Unlocked before calling the Tx call back API to give the possibility to
- start again the Transmission under the Tx call back API */
- __HAL_UNLOCK(hcec);
-
- HAL_CEC_TxCpltCallback(hcec);
-
- return HAL_OK;
- }
- else
- {
- if (hcec->TxXferCount == 1)
- {
- /* if this is the last byte transmission, set TX End of Message (TXEOM) bit */
- __HAL_CEC_LAST_BYTE_TX_SET(hcec);
- }
- /* clear Tx-Byte request flag */
- __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXBR);
- hcec->Instance->TXDR = *hcec->pTxBuffPtr++;
- hcec->TxXferCount--;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcec);
-
- return HAL_OK;
- }
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive data in interrupt mode.
- * @param hcec: CEC handle
- * @param pData: pointer to received data buffer.
- * Note that the received data size is not known beforehand, the latter is known
- * when the reception is complete and is stored in hcec->RxXferSize.
- * hcec->RxXferSize is the sum of opcodes + operands (0 to 14 operands max).
- * If only a header is received, hcec->RxXferSize = 0
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CEC_Receive_IT(CEC_HandleTypeDef *hcec, uint8_t *pData)
-{
- if(hcec->State == HAL_CEC_STATE_READY)
- {
- if(pData == NULL)
- {
- hcec->State = HAL_CEC_STATE_ERROR;
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hcec);
- hcec->RxXferSize = 0;
- hcec->pRxBuffPtr = pData;
- hcec->ErrorCode = HAL_CEC_ERROR_NONE;
- /* the IP is moving to a ready to receive state */
- hcec->State = HAL_CEC_STATE_STANDBY_RX;
-
- /* Disable Peripheral to write CEC_IER register */
- __HAL_CEC_DISABLE(hcec);
-
- /* Enable the following CEC Reception Error Interrupts:
- * Rx overrun
- * Rx bit rising error
- * Rx short bit period error
- * Rx long bit period error
- * Rx missing acknowledge */
- __HAL_CEC_ENABLE_IT(hcec, CEC_IER_RX_ALL_ERR);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcec);
-
- /* Enable the following two CEC Reception interrupts:
- * Rx Byte Received IT
- * End of Reception IT */
- __HAL_CEC_ENABLE_IT(hcec, CEC_IT_RXBR|CEC_IT_RXEND);
-
- __HAL_CEC_ENABLE(hcec);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Get size of the received frame.
- * @param hcec: CEC handle
- * @retval Frame size
- */
-uint32_t HAL_CEC_GetReceivedFrameSize(CEC_HandleTypeDef *hcec)
-{
- return hcec->RxXferSize;
-}
-
-/**
- * @brief This function handles CEC interrupt requests.
- * @param hcec: CEC handle
- * @retval None
- */
-void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec)
-{
- /* save interrupts register for further error or interrupts handling purposes */
- hcec->ErrorCode = hcec->Instance->ISR;
- /* CEC TX missing acknowledge error interrupt occurred -------------------------------------*/
- if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_TXACKE) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_TXACKE) != RESET))
- {
- __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXACKE);
- hcec->State = HAL_CEC_STATE_ERROR;
- }
-
- /* CEC transmit error interrupt occured --------------------------------------*/
- if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_TXERR) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_TXERR) != RESET))
- {
- __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXERR);
- hcec->State = HAL_CEC_STATE_ERROR;
- }
-
- /* CEC TX underrun error interrupt occured --------------------------------------*/
- if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_TXUDR) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_TXUDR) != RESET))
- {
- __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_TXUDR);
- hcec->State = HAL_CEC_STATE_ERROR;
- }
-
- /* CEC TX arbitration error interrupt occured --------------------------------------*/
- if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_ARBLST) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_ARBLST) != RESET))
- {
- __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_ARBLST);
- hcec->State = HAL_CEC_STATE_ERROR;
- }
-
- /* CEC RX overrun error interrupt occured --------------------------------------*/
- if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_RXOVR) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_RXOVR) != RESET))
- {
- __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXOVR);
- hcec->State = HAL_CEC_STATE_ERROR;
- }
-
- /* CEC RX bit rising error interrupt occured --------------------------------------*/
- if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_BRE) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_BRE) != RESET))
- {
- __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_BRE);
- hcec->State = HAL_CEC_STATE_ERROR;
- }
-
- /* CEC RX short bit period error interrupt occured --------------------------------------*/
- if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_SBPE) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_SBPE) != RESET))
- {
- __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_SBPE);
- hcec->State = HAL_CEC_STATE_ERROR;
- }
-
- /* CEC RX long bit period error interrupt occured --------------------------------------*/
- if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_LBPE) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_LBPE) != RESET))
- {
- __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_LBPE);
- hcec->State = HAL_CEC_STATE_ERROR;
- }
-
- /* CEC RX missing acknowledge error interrupt occured --------------------------------------*/
- if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_RXACKE) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_RXACKE) != RESET))
- {
- __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXACKE);
- hcec->State = HAL_CEC_STATE_ERROR;
- }
-
- if ((hcec->ErrorCode & CEC_ISR_ALL_ERROR) != 0)
- {
- HAL_CEC_ErrorCallback(hcec);
- }
-
- /* CEC RX byte received interrupt ---------------------------------------------------*/
- if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_RXBR) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_RXBR) != RESET))
- {
- /* RXBR IT is cleared during HAL_CEC_Transmit_IT processing */
- CEC_Receive_IT(hcec);
- }
-
- /* CEC RX end received interrupt ---------------------------------------------------*/
- if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_RXEND) != RESET) && (__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_RXEND) != RESET))
- {
- /* RXBR IT is cleared during HAL_CEC_Transmit_IT processing */
- CEC_Receive_IT(hcec);
- }
-
-
- /* CEC TX byte request interrupt ------------------------------------------------*/
- if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_TXBR) != RESET) &&(__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_TXBR) != RESET))
- {
- /* TXBR IT is cleared during HAL_CEC_Transmit_IT processing */
- CEC_Transmit_IT(hcec);
- }
-
- /* CEC TX end interrupt ------------------------------------------------*/
- if((__HAL_CEC_GET_FLAG(hcec, CEC_FLAG_TXEND) != RESET) &&(__HAL_CEC_GET_IT_SOURCE(hcec, CEC_IT_TXEND) != RESET))
- {
- /* TXEND IT is cleared during HAL_CEC_Transmit_IT processing */
- CEC_Transmit_IT(hcec);
- }
-}
-
-/**
- * @brief Tx Transfer completed callback
- * @param hcec: CEC handle
- * @retval None
- */
- __weak void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec)
-{
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_CEC_TxCpltCallback can be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Transfer completed callback
- * @param hcec: CEC handle
- * @retval None
- */
-__weak void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec)
-{
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_CEC_TxCpltCallback can be implemented in the user file
- */
-}
-
-/**
- * @brief CEC error callbacks
- * @param hcec: CEC handle
- * @retval None
- */
- __weak void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec)
-{
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_CEC_ErrorCallback can be implemented in the user file
- */
-}
-/**
- * @}
- */
-
-/** @defgroup CEC_Exported_Functions_Group3 Peripheral Control function
- * @brief CEC control functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Control function #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to control the CEC.
- (+) HAL_CEC_GetState() API can be helpful to check in run-time the state of the CEC peripheral.
-@endverbatim
- * @{
- */
-/**
- * @brief return the CEC state
- * @param hcec: CEC handle
- * @retval HAL state
- */
-HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec)
-{
- return hcec->State;
-}
-
-/**
-* @brief Return the CEC error code
-* @param hcec : pointer to a CEC_HandleTypeDef structure that contains
- * the configuration information for the specified CEC.
-* @retval CEC Error Code
-*/
-uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec)
-{
- return hcec->ErrorCode;
-}
-
-/**
- * @}
- */
-
-/**
- * @brief Send data in interrupt mode
- * @param hcec: CEC handle.
- * Function called under interruption only, once
- * interruptions have been enabled by HAL_CEC_Transmit_IT()
- * @retval HAL status
- */
-static HAL_StatusTypeDef CEC_Transmit_IT(CEC_HandleTypeDef *hcec)
-{
- /* if the IP is already busy or if there is a previous transmission
- already pending due to arbitration loss */
- if ((hcec->State == HAL_CEC_STATE_BUSY_TX)
- || (__HAL_CEC_GET_TRANSMISSION_START_FLAG(hcec) != RESET))
- {
- __HAL_LOCK(hcec);
- /* set state to BUSY TX, in case it wasn't set already (case
- * of transmission new attempt after arbitration loss) */
- if (hcec->State != HAL_CEC_STATE_BUSY_TX)
- {
- hcec->State = HAL_CEC_STATE_BUSY_TX;
- }
-
- /* if all data have been sent */
- if(hcec->TxXferCount == 0)
- {
- /* Disable Peripheral to write CEC_IER register */
- __HAL_CEC_DISABLE(hcec);
-
- /* Disable the CEC Transmission Interrupts */
- __HAL_CEC_DISABLE_IT(hcec, CEC_IT_TXBR|CEC_IT_TXEND);
- /* Disable the CEC Transmission Error Interrupts */
- __HAL_CEC_DISABLE_IT(hcec, CEC_IER_TX_ALL_ERR);
-
- /* Enable the Peripheral */
- __HAL_CEC_ENABLE(hcec);
-
- __HAL_CEC_CLEAR_FLAG(hcec,CEC_FLAG_TXBR|CEC_FLAG_TXEND);
-
- hcec->State = HAL_CEC_STATE_READY;
- /* Call the Process Unlocked before calling the Tx call back API to give the possibility to
- start again the Transmission under the Tx call back API */
- __HAL_UNLOCK(hcec);
-
- HAL_CEC_TxCpltCallback(hcec);
-
- return HAL_OK;
- }
- else
- {
- if (hcec->TxXferCount == 1)
- {
- /* if this is the last byte transmission, set TX End of Message (TXEOM) bit */
- __HAL_CEC_LAST_BYTE_TX_SET(hcec);
- }
- /* clear Tx-Byte request flag */
- __HAL_CEC_CLEAR_FLAG(hcec,CEC_FLAG_TXBR);
- hcec->Instance->TXDR = *hcec->pTxBuffPtr++;
- hcec->TxXferCount--;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcec);
-
- return HAL_OK;
- }
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-
-/**
- * @brief Receive data in interrupt mode.
- * @param hcec: CEC handle.
- * Function called under interruption only, once
- * interruptions have been enabled by HAL_CEC_Receive_IT()
- * @retval HAL status
- */
-static HAL_StatusTypeDef CEC_Receive_IT(CEC_HandleTypeDef *hcec)
-{
- uint32_t tempisr;
-
- /* Three different conditions are tested to carry out the RX IT processing:
- * - the IP is in reception stand-by (the IP state is HAL_CEC_STATE_STANDBY_RX) and
- * the reception of the first byte is starting
- * - a message reception is already on-going (the IP state is HAL_CEC_STATE_BUSY_RX)
- * and a new byte is being received
- * - a transmission has just been started (the IP state is HAL_CEC_STATE_BUSY_TX)
- * but has been interrupted by a new message reception or discarded due to
- * arbitration loss: the reception of the first or higher priority message
- * (the arbitration winner) is starting */
- if ((hcec->State == HAL_CEC_STATE_STANDBY_RX)
- || (hcec->State == HAL_CEC_STATE_BUSY_RX)
- || (hcec->State == HAL_CEC_STATE_BUSY_TX))
- {
- /* reception is starting */
- hcec->State = HAL_CEC_STATE_BUSY_RX;
- tempisr = (uint32_t) (hcec->Instance->ISR);
- if ((tempisr & CEC_FLAG_RXBR) != 0)
- {
- /* Process Locked */
- __HAL_LOCK(hcec);
- /* read received byte */
- *hcec->pRxBuffPtr++ = hcec->Instance->RXDR;
- /* if last byte has been received */
- if ((tempisr & CEC_FLAG_RXEND) != 0)
- {
- /* clear IT */
- __HAL_CEC_CLEAR_FLAG(hcec,CEC_FLAG_RXBR|CEC_FLAG_RXEND);
- /* RX interrupts are not disabled at this point.
- * Indeed, to disable the IT, the IP must be disabled first
- * which resets the TXSOM flag. In case of arbitration loss,
- * this leads to a transmission abort.
- * Therefore, RX interruptions disabling if so required,
- * is done in HAL_CEC_RxCpltCallback */
-
- /* IP state is moved to READY.
- * If the IP must remain in standby mode to listen
- * any new message, it is up to HAL_CEC_RxCpltCallback
- * to move it again to HAL_CEC_STATE_STANDBY_RX */
- hcec->State = HAL_CEC_STATE_READY;
-
- /* Call the Process Unlocked before calling the Rx call back API */
- __HAL_UNLOCK(hcec);
- HAL_CEC_RxCpltCallback(hcec);
-
- return HAL_OK;
- }
- __HAL_CEC_CLEAR_FLAG(hcec, CEC_FLAG_RXBR);
-
- hcec->RxXferSize++;
- /* Process Unlocked */
- __HAL_UNLOCK(hcec);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
- }
- else
- {
- return HAL_BUSY;
- }
-}
-/**
- * @}
- */
-
-#endif /* STM32F446xx */
-
-#endif /* HAL_CEC_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c
deleted file mode 100644
index b796be8..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c
+++ /dev/null
@@ -1,436 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_cortex.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief CORTEX HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the CORTEX:
- * + Initialization and de-initialization functions
- * + Peripheral Control functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
-
- [..]
- *** How to configure Interrupts using CORTEX HAL driver ***
- ===========================================================
- [..]
- This section provides functions allowing to configure the NVIC interrupts (IRQ).
- The Cortex-M4 exceptions are managed by CMSIS functions.
-
- (#) Configure the NVIC Priority Grouping using HAL_NVIC_SetPriorityGrouping()
- function according to the following table.
- (#) Configure the priority of the selected IRQ Channels using HAL_NVIC_SetPriority().
- (#) Enable the selected IRQ Channels using HAL_NVIC_EnableIRQ().
- (#) please refer to programing manual for details in how to configure priority.
-
- -@- When the NVIC_PRIORITYGROUP_0 is selected, IRQ preemption is no more possible.
- The pending IRQ priority will be managed only by the sub priority.
-
- -@- IRQ priority order (sorted by highest to lowest priority):
- (+@) Lowest preemption priority
- (+@) Lowest sub priority
- (+@) Lowest hardware priority (IRQ number)
-
- [..]
- *** How to configure Systick using CORTEX HAL driver ***
- ========================================================
- [..]
- Setup SysTick Timer for time base.
-
- (+) The HAL_SYSTICK_Config() function calls the SysTick_Config() function which
- is a CMSIS function that:
- (++) Configures the SysTick Reload register with value passed as function parameter.
- (++) Configures the SysTick IRQ priority to the lowest value (0x0F).
- (++) Resets the SysTick Counter register.
- (++) Configures the SysTick Counter clock source to be Core Clock Source (HCLK).
- (++) Enables the SysTick Interrupt.
- (++) Starts the SysTick Counter.
-
- (+) You can change the SysTick Clock source to be HCLK_Div8 by calling the macro
- __HAL_CORTEX_SYSTICKCLK_CONFIG(SYSTICK_CLKSOURCE_HCLK_DIV8) just after the
- HAL_SYSTICK_Config() function call. The __HAL_CORTEX_SYSTICKCLK_CONFIG() macro is defined
- inside the stm32f4xx_hal_cortex.h file.
-
- (+) You can change the SysTick IRQ priority by calling the
- HAL_NVIC_SetPriority(SysTick_IRQn,...) function just after the HAL_SYSTICK_Config() function
- call. The HAL_NVIC_SetPriority() call the NVIC_SetPriority() function which is a CMSIS function.
-
- (+) To adjust the SysTick time base, use the following formula:
-
- Reload Value = SysTick Counter Clock (Hz) x Desired Time base (s)
- (++) Reload Value is the parameter to be passed for HAL_SYSTICK_Config() function
- (++) Reload Value should not exceed 0xFFFFFF
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup CORTEX CORTEX
- * @brief CORTEX HAL module driver
- * @{
- */
-
-#ifdef HAL_CORTEX_MODULE_ENABLED
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-
-/** @defgroup CORTEX_Exported_Functions CORTEX Exported Functions
- * @{
- */
-
-
-/** @defgroup CORTEX_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ==============================================================================
- ##### Initialization and de-initialization functions #####
- ==============================================================================
- [..]
- This section provides the CORTEX HAL driver functions allowing to configure Interrupts
- Systick functionalities
-
-@endverbatim
- * @{
- */
-
-
-/**
- * @brief Sets the priority grouping field (preemption priority and subpriority)
- * using the required unlock sequence.
- * @param PriorityGroup: The priority grouping bits length.
- * This parameter can be one of the following values:
- * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
- * 4 bits for subpriority
- * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
- * 3 bits for subpriority
- * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
- * 2 bits for subpriority
- * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
- * 1 bits for subpriority
- * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
- * 0 bits for subpriority
- * @note When the NVIC_PriorityGroup_0 is selected, IRQ preemption is no more possible.
- * The pending IRQ priority will be managed only by the subpriority.
- * @retval None
- */
-void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup)
-{
- /* Check the parameters */
- assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
-
- /* Set the PRIGROUP[10:8] bits according to the PriorityGroup parameter value */
- NVIC_SetPriorityGrouping(PriorityGroup);
-}
-
-/**
- * @brief Sets the priority of an interrupt.
- * @param IRQn: External interrupt number.
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
- * @param PreemptPriority: The preemption priority for the IRQn channel.
- * This parameter can be a value between 0 and 15
- * A lower priority value indicates a higher priority
- * @param SubPriority: the subpriority level for the IRQ channel.
- * This parameter can be a value between 0 and 15
- * A lower priority value indicates a higher priority.
- * @retval None
- */
-void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority)
-{
- uint32_t prioritygroup = 0x00;
-
- /* Check the parameters */
- assert_param(IS_NVIC_SUB_PRIORITY(SubPriority));
- assert_param(IS_NVIC_PREEMPTION_PRIORITY(PreemptPriority));
-
- prioritygroup = NVIC_GetPriorityGrouping();
-
- NVIC_SetPriority(IRQn, NVIC_EncodePriority(prioritygroup, PreemptPriority, SubPriority));
-}
-
-/**
- * @brief Enables a device specific interrupt in the NVIC interrupt controller.
- * @note To configure interrupts priority correctly, the NVIC_PriorityGroupConfig()
- * function should be called before.
- * @param IRQn External interrupt number.
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
- * @retval None
- */
-void HAL_NVIC_EnableIRQ(IRQn_Type IRQn)
-{
- /* Check the parameters */
- assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
-
- /* Enable interrupt */
- NVIC_EnableIRQ(IRQn);
-}
-
-/**
- * @brief Disables a device specific interrupt in the NVIC interrupt controller.
- * @param IRQn External interrupt number.
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
- * @retval None
- */
-void HAL_NVIC_DisableIRQ(IRQn_Type IRQn)
-{
- /* Check the parameters */
- assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
-
- /* Disable interrupt */
- NVIC_DisableIRQ(IRQn);
-}
-
-/**
- * @brief Initiates a system reset request to reset the MCU.
- * @retval None
- */
-void HAL_NVIC_SystemReset(void)
-{
- /* System Reset */
- NVIC_SystemReset();
-}
-
-/**
- * @brief Initializes the System Timer and its interrupt, and starts the System Tick Timer.
- * Counter is in free running mode to generate periodic interrupts.
- * @param TicksNumb: Specifies the ticks Number of ticks between two interrupts.
- * @retval status: - 0 Function succeeded.
- * - 1 Function failed.
- */
-uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb)
-{
- return SysTick_Config(TicksNumb);
-}
-/**
- * @}
- */
-
-/** @defgroup CORTEX_Exported_Functions_Group2 Peripheral Control functions
- * @brief Cortex control functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral Control functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to control the CORTEX
- (NVIC, SYSTICK) functionalities.
-
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Gets the priority grouping field from the NVIC Interrupt Controller.
- * @retval Priority grouping field (SCB->AIRCR [10:8] PRIGROUP field)
- */
-uint32_t HAL_NVIC_GetPriorityGrouping(void)
-{
- /* Get the PRIGROUP[10:8] field value */
- return NVIC_GetPriorityGrouping();
-}
-
-/**
- * @brief Gets the priority of an interrupt.
- * @param IRQn: External interrupt number.
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
- * @param PriorityGroup: the priority grouping bits length.
- * This parameter can be one of the following values:
- * @arg NVIC_PRIORITYGROUP_0: 0 bits for preemption priority
- * 4 bits for subpriority
- * @arg NVIC_PRIORITYGROUP_1: 1 bits for preemption priority
- * 3 bits for subpriority
- * @arg NVIC_PRIORITYGROUP_2: 2 bits for preemption priority
- * 2 bits for subpriority
- * @arg NVIC_PRIORITYGROUP_3: 3 bits for preemption priority
- * 1 bits for subpriority
- * @arg NVIC_PRIORITYGROUP_4: 4 bits for preemption priority
- * 0 bits for subpriority
- * @param pPreemptPriority: Pointer on the Preemptive priority value (starting from 0).
- * @param pSubPriority: Pointer on the Subpriority value (starting from 0).
- * @retval None
- */
-void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t *pPreemptPriority, uint32_t *pSubPriority)
-{
- /* Check the parameters */
- assert_param(IS_NVIC_PRIORITY_GROUP(PriorityGroup));
- /* Get priority for Cortex-M system or device specific interrupts */
- NVIC_DecodePriority(NVIC_GetPriority(IRQn), PriorityGroup, pPreemptPriority, pSubPriority);
-}
-
-/**
- * @brief Sets Pending bit of an external interrupt.
- * @param IRQn External interrupt number
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
- * @retval None
- */
-void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn)
-{
- /* Check the parameters */
- assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
-
- /* Set interrupt pending */
- NVIC_SetPendingIRQ(IRQn);
-}
-
-/**
- * @brief Gets Pending Interrupt (reads the pending register in the NVIC
- * and returns the pending bit for the specified interrupt).
- * @param IRQn External interrupt number.
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
- * @retval status: - 0 Interrupt status is not pending.
- * - 1 Interrupt status is pending.
- */
-uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn)
-{
- /* Check the parameters */
- assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
-
- /* Return 1 if pending else 0 */
- return NVIC_GetPendingIRQ(IRQn);
-}
-
-/**
- * @brief Clears the pending bit of an external interrupt.
- * @param IRQn External interrupt number.
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
- * @retval None
- */
-void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn)
-{
- /* Check the parameters */
- assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
-
- /* Clear pending interrupt */
- NVIC_ClearPendingIRQ(IRQn);
-}
-
-/**
- * @brief Gets active interrupt ( reads the active register in NVIC and returns the active bit).
- * @param IRQn External interrupt number
- * This parameter can be an enumerator of IRQn_Type enumeration
- * (For the complete STM32 Devices IRQ Channels list, please refer to the appropriate CMSIS device file (stm32f4xxxx.h))
- * @retval status: - 0 Interrupt status is not pending.
- * - 1 Interrupt status is pending.
- */
-uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn)
-{
- /* Check the parameters */
- assert_param(IS_NVIC_DEVICE_IRQ(IRQn));
-
- /* Return 1 if active else 0 */
- return NVIC_GetActive(IRQn);
-}
-
-/**
- * @brief Configures the SysTick clock source.
- * @param CLKSource: specifies the SysTick clock source.
- * This parameter can be one of the following values:
- * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source.
- * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source.
- * @retval None
- */
-void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource)
-{
- /* Check the parameters */
- assert_param(IS_SYSTICK_CLK_SOURCE(CLKSource));
- if (CLKSource == SYSTICK_CLKSOURCE_HCLK)
- {
- SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK;
- }
- else
- {
- SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK;
- }
-}
-
-/**
- * @brief This function handles SYSTICK interrupt request.
- * @retval None
- */
-void HAL_SYSTICK_IRQHandler(void)
-{
- HAL_SYSTICK_Callback();
-}
-
-/**
- * @brief SYSTICK callback.
- * @retval None
- */
-__weak void HAL_SYSTICK_Callback(void)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SYSTICK_Callback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_CORTEX_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_crc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_crc.c
deleted file mode 100644
index b1a65c4..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_crc.c
+++ /dev/null
@@ -1,342 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_crc.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief CRC HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Cyclic Redundancy Check (CRC) peripheral:
- * + Initialization and de-initialization functions
- * + Peripheral Control functions
- * + Peripheral State functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- The CRC HAL driver can be used as follows:
-
- (#) Enable CRC AHB clock using __HAL_RCC_CRC_CLK_ENABLE();
-
- (#) Use HAL_CRC_Accumulate() function to compute the CRC value of
- a 32-bit data buffer using combination of the previous CRC value
- and the new one.
-
- (#) Use HAL_CRC_Calculate() function to compute the CRC Value of
- a new 32-bit data buffer. This function resets the CRC computation
- unit before starting the computation to avoid getting wrong CRC values.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup CRC
- * @{
- */
-
-#ifdef HAL_CRC_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-
-/** @addtogroup CRC_Exported_Functions
- * @{
- */
-
-/** @addtogroup CRC_Exported_Functions_Group1
- * @brief Initialization and de-initialization functions
- *
-@verbatim
- ==============================================================================
- ##### Initialization and de-initialization functions #####
- ==============================================================================
- [..] This section provides functions allowing to:
- (+) Initialize the CRC according to the specified parameters
- in the CRC_InitTypeDef and create the associated handle
- (+) DeInitialize the CRC peripheral
- (+) Initialize the CRC MSP
- (+) DeInitialize CRC MSP
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the CRC according to the specified
- * parameters in the CRC_InitTypeDef and creates the associated handle.
- * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains
- * the configuration information for CRC
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc)
-{
- /* Check the CRC handle allocation */
- if(hcrc == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance));
-
- if(hcrc->State == HAL_CRC_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hcrc->Lock = HAL_UNLOCKED;
- /* Init the low level hardware */
- HAL_CRC_MspInit(hcrc);
- }
-
- /* Change CRC peripheral state */
- hcrc->State = HAL_CRC_STATE_BUSY;
-
- /* Change CRC peripheral state */
- hcrc->State = HAL_CRC_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the CRC peripheral.
- * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains
- * the configuration information for CRC
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRC_DeInit(CRC_HandleTypeDef *hcrc)
-{
- /* Check the CRC handle allocation */
- if(hcrc == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_CRC_ALL_INSTANCE(hcrc->Instance));
-
- /* Change CRC peripheral state */
- hcrc->State = HAL_CRC_STATE_BUSY;
-
- /* DeInit the low level hardware */
- HAL_CRC_MspDeInit(hcrc);
-
- /* Change CRC peripheral state */
- hcrc->State = HAL_CRC_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hcrc);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRC MSP.
- * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains
- * the configuration information for CRC
- * @retval None
- */
-__weak void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_CRC_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes the CRC MSP.
- * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains
- * the configuration information for CRC
- * @retval None
- */
-__weak void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_CRC_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @addtogroup CRC_Exported_Functions_Group2
- * @brief Peripheral Control functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral Control functions #####
- ==============================================================================
- [..] This section provides functions allowing to:
- (+) Compute the 32-bit CRC value of 32-bit data buffer,
- using combination of the previous CRC value and the new one.
- (+) Compute the 32-bit CRC value of 32-bit data buffer,
- independently of the previous CRC value.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Computes the 32-bit CRC of 32-bit data buffer using combination
- * of the previous CRC value and the new one.
- * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains
- * the configuration information for CRC
- * @param pBuffer: pointer to the buffer containing the data to be computed
- * @param BufferLength: length of the buffer to be computed
- * @retval 32-bit CRC
- */
-uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength)
-{
- uint32_t index = 0;
-
- /* Process Locked */
- __HAL_LOCK(hcrc);
-
- /* Change CRC peripheral state */
- hcrc->State = HAL_CRC_STATE_BUSY;
-
- /* Enter Data to the CRC calculator */
- for(index = 0; index < BufferLength; index++)
- {
- hcrc->Instance->DR = pBuffer[index];
- }
-
- /* Change CRC peripheral state */
- hcrc->State = HAL_CRC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcrc);
-
- /* Return the CRC computed value */
- return hcrc->Instance->DR;
-}
-
-/**
- * @brief Computes the 32-bit CRC of 32-bit data buffer independently
- * of the previous CRC value.
- * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains
- * the configuration information for CRC
- * @param pBuffer: Pointer to the buffer containing the data to be computed
- * @param BufferLength: Length of the buffer to be computed
- * @retval 32-bit CRC
- */
-uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength)
-{
- uint32_t index = 0;
-
- /* Process Locked */
- __HAL_LOCK(hcrc);
-
- /* Change CRC peripheral state */
- hcrc->State = HAL_CRC_STATE_BUSY;
-
- /* Reset CRC Calculation Unit */
- __HAL_CRC_DR_RESET(hcrc);
-
- /* Enter Data to the CRC calculator */
- for(index = 0; index < BufferLength; index++)
- {
- hcrc->Instance->DR = pBuffer[index];
- }
-
- /* Change CRC peripheral state */
- hcrc->State = HAL_CRC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcrc);
-
- /* Return the CRC computed value */
- return hcrc->Instance->DR;
-}
-
-/**
- * @}
- */
-
-
-/** @addtogroup CRC_Exported_Functions_Group3
- * @brief Peripheral State functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral State functions #####
- ==============================================================================
- [..]
- This subsection permits to get in run-time the status of the peripheral
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Returns the CRC state.
- * @param hcrc: pointer to a CRC_HandleTypeDef structure that contains
- * the configuration information for CRC
- * @retval HAL state
- */
-HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc)
-{
- return hcrc->State;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_CRC_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp.c
deleted file mode 100644
index 7458dfd..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp.c
+++ /dev/null
@@ -1,3813 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_cryp.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief CRYP HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Cryptography (CRYP) peripheral:
- * + Initialization and de-initialization functions
- * + AES processing functions
- * + DES processing functions
- * + TDES processing functions
- * + DMA callback functions
- * + CRYP IRQ handler management
- * + Peripheral State functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- The CRYP HAL driver can be used as follows:
-
- (#)Initialize the CRYP low level resources by implementing the HAL_CRYP_MspInit():
- (##) Enable the CRYP interface clock using __HAL_RCC_CRYP_CLK_ENABLE()
- (##) In case of using interrupts (e.g. HAL_CRYP_AESECB_Encrypt_IT())
- (+++) Configure the CRYP interrupt priority using HAL_NVIC_SetPriority()
- (+++) Enable the CRYP IRQ handler using HAL_NVIC_EnableIRQ()
- (+++) In CRYP IRQ handler, call HAL_CRYP_IRQHandler()
- (##) In case of using DMA to control data transfer (e.g. HAL_CRYP_AESECB_Encrypt_DMA())
- (+++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
- (+++) Configure and enable two DMA streams one for managing data transfer from
- memory to peripheral (input stream) and another stream for managing data
- transfer from peripheral to memory (output stream)
- (+++) Associate the initialized DMA handle to the CRYP DMA handle
- using __HAL_LINKDMA()
- (+++) Configure the priority and enable the NVIC for the transfer complete
- interrupt on the two DMA Streams. The output stream should have higher
- priority than the input stream HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ()
-
- (#)Initialize the CRYP HAL using HAL_CRYP_Init(). This function configures mainly:
- (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit
- (##) The key size: 128, 192 and 256. This parameter is relevant only for AES
- (##) The encryption/decryption key. It's size depends on the algorithm
- used for encryption/decryption
- (##) The initialization vector (counter). It is not used ECB mode.
-
- (#)Three processing (encryption/decryption) functions are available:
- (##) Polling mode: encryption and decryption APIs are blocking functions
- i.e. they process the data and wait till the processing is finished,
- e.g. HAL_CRYP_AESCBC_Encrypt()
- (##) Interrupt mode: encryption and decryption APIs are not blocking functions
- i.e. they process the data under interrupt,
- e.g. HAL_CRYP_AESCBC_Encrypt_IT()
- (##) DMA mode: encryption and decryption APIs are not blocking functions
- i.e. the data transfer is ensured by DMA,
- e.g. HAL_CRYP_AESCBC_Encrypt_DMA()
-
- (#)When the processing function is called at first time after HAL_CRYP_Init()
- the CRYP peripheral is initialized and processes the buffer in input.
- At second call, the processing function performs an append of the already
- processed buffer.
- When a new data block is to be processed, call HAL_CRYP_Init() then the
- processing function.
-
- (#)Call HAL_CRYP_DeInit() to deinitialize the CRYP peripheral.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup CRYP CRYP
- * @brief CRYP HAL module driver.
- * @{
- */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-
-#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @addtogroup CRYP_Private_define
- * @{
- */
-#define CRYP_TIMEOUT_VALUE 1
-/**
- * @}
- */
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @addtogroup CRYP_Private_Functions_prototypes
- * @{
- */
-static void CRYP_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector, uint32_t IVSize);
-static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize);
-static HAL_StatusTypeDef CRYP_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout);
-static HAL_StatusTypeDef CRYP_ProcessData2Words(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout);
-static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma);
-static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma);
-static void CRYP_DMAError(DMA_HandleTypeDef *hdma);
-static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr);
-static void CRYP_SetTDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
-static void CRYP_SetTDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
-static void CRYP_SetDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
-static void CRYP_SetDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction);
-/**
- * @}
- */
-
-
-/* Private functions ---------------------------------------------------------*/
-
-/** @addtogroup CRYP_Private_Functions
- * @{
- */
-
-
-/**
- * @brief DMA CRYP Input Data process complete callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void CRYP_DMAInCplt(DMA_HandleTypeDef *hdma)
-{
- CRYP_HandleTypeDef* hcryp = (CRYP_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- /* Disable the DMA transfer for input FIFO request by resetting the DIEN bit
- in the DMACR register */
- hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DIEN);
-
- /* Call input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
-}
-
-/**
- * @brief DMA CRYP Output Data process complete callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void CRYP_DMAOutCplt(DMA_HandleTypeDef *hdma)
-{
- CRYP_HandleTypeDef* hcryp = (CRYP_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- /* Disable the DMA transfer for output FIFO request by resetting the DOEN bit
- in the DMACR register */
- hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DOEN);
-
- /* Disable CRYP */
- __HAL_CRYP_DISABLE(hcryp);
-
- /* Change the CRYP state to ready */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Call output data transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
-}
-
-/**
- * @brief DMA CRYP communication error callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void CRYP_DMAError(DMA_HandleTypeDef *hdma)
-{
- CRYP_HandleTypeDef* hcryp = (CRYP_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
- hcryp->State= HAL_CRYP_STATE_READY;
- HAL_CRYP_ErrorCallback(hcryp);
-}
-
-/**
- * @brief Writes the Key in Key registers.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param Key: Pointer to Key buffer
- * @param KeySize: Size of Key
- * @retval None
- */
-static void CRYP_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize)
-{
- uint32_t keyaddr = (uint32_t)Key;
-
- switch(KeySize)
- {
- case CRYP_KEYSIZE_256B:
- /* Key Initialisation */
- hcryp->Instance->K0LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K0RR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K1LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K1RR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
- break;
- case CRYP_KEYSIZE_192B:
- hcryp->Instance->K1LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K1RR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
- break;
- case CRYP_KEYSIZE_128B:
- hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
- break;
- default:
- break;
- }
-}
-
-/**
- * @brief Writes the InitVector/InitCounter in IV registers.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param InitVector: Pointer to InitVector/InitCounter buffer
- * @param IVSize: Size of the InitVector/InitCounter
- * @retval None
- */
-static void CRYP_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector, uint32_t IVSize)
-{
- uint32_t ivaddr = (uint32_t)InitVector;
-
- switch(IVSize)
- {
- case CRYP_KEYSIZE_128B:
- hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
- ivaddr+=4;
- hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
- ivaddr+=4;
- hcryp->Instance->IV1LR = __REV(*(uint32_t*)(ivaddr));
- ivaddr+=4;
- hcryp->Instance->IV1RR = __REV(*(uint32_t*)(ivaddr));
- break;
- /* Whatever key size 192 or 256, Init vector is written in IV0LR and IV0RR */
- case CRYP_KEYSIZE_192B:
- hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
- ivaddr+=4;
- hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
- break;
- case CRYP_KEYSIZE_256B:
- hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
- ivaddr+=4;
- hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
- break;
- default:
- break;
- }
-}
-
-/**
- * @brief Process Data: Writes Input data in polling mode and read the output data
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param Input: Pointer to the Input buffer
- * @param Ilength: Length of the Input buffer, must be a multiple of 16.
- * @param Output: Pointer to the returned buffer
- * @param Timeout: Timeout value
- * * @retval None
- */
-static HAL_StatusTypeDef CRYP_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- uint32_t i = 0;
- uint32_t inputaddr = (uint32_t)Input;
- uint32_t outputaddr = (uint32_t)Output;
-
- for(i=0; (i < Ilength); i+=16)
- {
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- }
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Process Data: Write Input data in polling mode.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param Input: Pointer to the Input buffer
- * @param Ilength: Length of the Input buffer, must be a multiple of 8
- * @param Output: Pointer to the returned buffer
- * @param Timeout: Specify Timeout value
- * @retval None
- */
-static HAL_StatusTypeDef CRYP_ProcessData2Words(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint8_t* Output, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- uint32_t i = 0;
- uint32_t inputaddr = (uint32_t)Input;
- uint32_t outputaddr = (uint32_t)Output;
-
- for(i=0; (i < Ilength); i+=8)
- {
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- }
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Set the DMA configuration and start the DMA transfer
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param inputaddr: address of the Input buffer
- * @param Size: Size of the Input buffer, must be a multiple of 16.
- * @param outputaddr: address of the Output buffer
- * @retval None
- */
-static void CRYP_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr)
-{
- /* Set the CRYP DMA transfer complete callback */
- hcryp->hdmain->XferCpltCallback = CRYP_DMAInCplt;
- /* Set the DMA error callback */
- hcryp->hdmain->XferErrorCallback = CRYP_DMAError;
-
- /* Set the CRYP DMA transfer complete callback */
- hcryp->hdmaout->XferCpltCallback = CRYP_DMAOutCplt;
- /* Set the DMA error callback */
- hcryp->hdmaout->XferErrorCallback = CRYP_DMAError;
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Enable the DMA In DMA Stream */
- HAL_DMA_Start_IT(hcryp->hdmain, inputaddr, (uint32_t)&hcryp->Instance->DR, Size/4);
-
- /* Enable In DMA request */
- hcryp->Instance->DMACR = (CRYP_DMACR_DIEN);
-
- /* Enable the DMA Out DMA Stream */
- HAL_DMA_Start_IT(hcryp->hdmaout, (uint32_t)&hcryp->Instance->DOUT, outputaddr, Size/4);
-
- /* Enable Out DMA request */
- hcryp->Instance->DMACR |= CRYP_DMACR_DOEN;
-
-}
-
-/**
- * @brief Sets the CRYP peripheral in DES ECB mode.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param Direction: Encryption or decryption
- * @retval None
- */
-static void CRYP_SetDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
-{
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the CRYP peripheral in AES ECB mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_DES_ECB | Direction);
-
- /* Set the key */
- hcryp->Instance->K1LR = __REV(*(uint32_t*)(hcryp->Init.pKey));
- hcryp->Instance->K1RR = __REV(*(uint32_t*)(hcryp->Init.pKey+4));
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-}
-
-/**
- * @brief Sets the CRYP peripheral in DES CBC mode.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param Direction: Encryption or decryption
- * @retval None
- */
-static void CRYP_SetDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
-{
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the CRYP peripheral in AES ECB mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_DES_CBC | Direction);
-
- /* Set the key */
- hcryp->Instance->K1LR = __REV(*(uint32_t*)(hcryp->Init.pKey));
- hcryp->Instance->K1RR = __REV(*(uint32_t*)(hcryp->Init.pKey+4));
-
- /* Set the Initialization Vector */
- CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_256B);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-}
-
-/**
- * @brief Sets the CRYP peripheral in TDES ECB mode.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param Direction: Encryption or decryption
- * @retval None
- */
-static void CRYP_SetTDESECBMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
-{
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the CRYP peripheral in AES ECB mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_TDES_ECB | Direction);
-
- /* Set the key */
- CRYP_SetKey(hcryp, hcryp->Init.pKey, CRYP_KEYSIZE_192B);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-}
-
-/**
- * @brief Sets the CRYP peripheral in TDES CBC mode
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param Direction: Encryption or decryption
- * @retval None
- */
-static void CRYP_SetTDESCBCMode(CRYP_HandleTypeDef *hcryp, uint32_t Direction)
-{
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the CRYP peripheral in AES CBC mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_TDES_CBC | Direction);
-
- /* Set the key */
- CRYP_SetKey(hcryp, hcryp->Init.pKey, CRYP_KEYSIZE_192B);
-
- /* Set the Initialization Vector */
- CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_256B);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-}
-
-/**
- * @}
- */
-
- /* Exported functions --------------------------------------------------------*/
-/** @addtogroup CRYP_Exported_Functions
- * @{
- */
-
-/** @defgroup CRYP_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions.
- *
-@verbatim
- ==============================================================================
- ##### Initialization and de-initialization functions #####
- ==============================================================================
- [..] This section provides functions allowing to:
- (+) Initialize the CRYP according to the specified parameters
- in the CRYP_InitTypeDef and creates the associated handle
- (+) DeInitialize the CRYP peripheral
- (+) Initialize the CRYP MSP
- (+) DeInitialize CRYP MSP
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the CRYP according to the specified
- * parameters in the CRYP_InitTypeDef and creates the associated handle.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp)
-{
- /* Check the CRYP handle allocation */
- if(hcryp == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_CRYP_KEYSIZE(hcryp->Init.KeySize));
- assert_param(IS_CRYP_DATATYPE(hcryp->Init.DataType));
-
- if(hcryp->State == HAL_CRYP_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hcryp->Lock = HAL_UNLOCKED;
- /* Init the low level hardware */
- HAL_CRYP_MspInit(hcryp);
- }
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set the key size and data type*/
- CRYP->CR = (uint32_t) (hcryp->Init.KeySize | hcryp->Init.DataType);
-
- /* Reset CrypInCount and CrypOutCount */
- hcryp->CrypInCount = 0;
- hcryp->CrypOutCount = 0;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Set the default CRYP phase */
- hcryp->Phase = HAL_CRYP_PHASE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the CRYP peripheral.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp)
-{
- /* Check the CRYP handle allocation */
- if(hcryp == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set the default CRYP phase */
- hcryp->Phase = HAL_CRYP_PHASE_READY;
-
- /* Reset CrypInCount and CrypOutCount */
- hcryp->CrypInCount = 0;
- hcryp->CrypOutCount = 0;
-
- /* Disable the CRYP Peripheral Clock */
- __HAL_CRYP_DISABLE(hcryp);
-
- /* DeInit the low level hardware: CLOCK, NVIC.*/
- HAL_CRYP_MspDeInit(hcryp);
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP MSP.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @retval None
- */
-__weak void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_CRYP_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes CRYP MSP.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @retval None
- */
-__weak void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_CRYP_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup CRYP_Exported_Functions_Group2 AES processing functions
- * @brief processing functions.
- *
-@verbatim
- ==============================================================================
- ##### AES processing functions #####
- ==============================================================================
- [..] This section provides functions allowing to:
- (+) Encrypt plaintext using AES-128/192/256 using chaining modes
- (+) Decrypt cyphertext using AES-128/192/256 using chaining modes
- [..] Three processing functions are available:
- (+) Polling mode
- (+) Interrupt mode
- (+) DMA mode
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the CRYP peripheral in AES ECB encryption mode
- * then encrypt pPlainData. The cypher data are available in pCypherData
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16.
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Timeout: Specify Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
-{
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES ECB mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Write Plain Data and Get Cypher Data */
- if(CRYP_ProcessData(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES CBC encryption mode
- * then encrypt pPlainData. The cypher data are available in pCypherData
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16.
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Timeout: Specify Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
-{
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES ECB mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC);
-
- /* Set the Initialization Vector */
- CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Write Plain Data and Get Cypher Data */
- if(CRYP_ProcessData(hcryp,pPlainData, Size, pCypherData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES CTR encryption mode
- * then encrypt pPlainData. The cypher data are available in pCypherData
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16.
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Timeout: Specify Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
-{
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES ECB mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR);
-
- /* Set the Initialization Vector */
- CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Write Plain Data and Get Cypher Data */
- if(CRYP_ProcessData(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-
-
-/**
- * @brief Initializes the CRYP peripheral in AES ECB decryption mode
- * then decrypted pCypherData. The cypher data are available in pPlainData
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16.
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Timeout: Specify Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES Key mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Disable CRYP */
- __HAL_CRYP_DISABLE(hcryp);
-
- /* Reset the ALGOMODE bits*/
- CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
-
- /* Set the CRYP peripheral in AES ECB decryption mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB | CRYP_CR_ALGODIR);
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Write Plain Data and Get Cypher Data */
- if(CRYP_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES ECB decryption mode
- * then decrypted pCypherData. The cypher data are available in pPlainData
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16.
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Timeout: Specify Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES Key mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Reset the ALGOMODE bits*/
- CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
-
- /* Set the CRYP peripheral in AES CBC decryption mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC | CRYP_CR_ALGODIR);
-
- /* Set the Initialization Vector */
- CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Write Plain Data and Get Cypher Data */
- if(CRYP_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES CTR decryption mode
- * then decrypted pCypherData. The cypher data are available in pPlainData
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16.
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Timeout: Specify Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
-{
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set the key */
- CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES CTR mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR | CRYP_CR_ALGODIR);
-
- /* Set the Initialization Vector */
- CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Write Plain Data and Get Cypher Data */
- if(CRYP_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES ECB encryption mode using Interrupt.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16 bytes
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pPlainData;
- hcryp->pCrypOutBuffPtr = pCypherData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES ECB mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- hcryp->pCrypInBuffPtr += 16;
- hcryp->CrypInCount -= 16;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
- /* Call the Input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- hcryp->pCrypOutBuffPtr += 16;
- hcryp->CrypOutCount -= 16;
- if(hcryp->CrypOutCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
- /* Process Locked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call Input transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES CBC encryption mode using Interrupt.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16 bytes
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pPlainData;
- hcryp->pCrypOutBuffPtr = pCypherData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES CBC mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC);
-
- /* Set the Initialization Vector */
- CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- hcryp->pCrypInBuffPtr += 16;
- hcryp->CrypInCount -= 16;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
- /* Call the Input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- hcryp->pCrypOutBuffPtr += 16;
- hcryp->CrypOutCount -= 16;
- if(hcryp->CrypOutCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
- /* Process Locked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call Input transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES CTR encryption mode using Interrupt.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16 bytes
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pPlainData;
- hcryp->pCrypOutBuffPtr = pCypherData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES CTR mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR);
-
- /* Set the Initialization Vector */
- CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- hcryp->pCrypInBuffPtr += 16;
- hcryp->CrypInCount -= 16;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
- /* Call the Input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- hcryp->pCrypOutBuffPtr += 16;
- hcryp->CrypOutCount -= 16;
- if(hcryp->CrypOutCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call Input transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-
-/**
- * @brief Initializes the CRYP peripheral in AES ECB decryption mode using Interrupt.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16.
- * @param pPlainData: Pointer to the plaintext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
- uint32_t tickstart = 0;
-
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pCypherData;
- hcryp->pCrypOutBuffPtr = pPlainData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES Key mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
-
- /* Reset the ALGOMODE bits*/
- CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
-
- /* Set the CRYP peripheral in AES ECB decryption mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB | CRYP_CR_ALGODIR);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- hcryp->pCrypInBuffPtr += 16;
- hcryp->CrypInCount -= 16;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
- /* Call the Input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- hcryp->pCrypOutBuffPtr += 16;
- hcryp->CrypOutCount -= 16;
- if(hcryp->CrypOutCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call Input transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES CBC decryption mode using IT.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16
- * @param pPlainData: Pointer to the plaintext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
-
- uint32_t tickstart = 0;
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Get the buffer addresses and sizes */
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pCypherData;
- hcryp->pCrypOutBuffPtr = pPlainData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES Key mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
-
- /* Reset the ALGOMODE bits*/
- CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
-
- /* Set the CRYP peripheral in AES CBC decryption mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC | CRYP_CR_ALGODIR);
-
- /* Set the Initialization Vector */
- CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- hcryp->pCrypInBuffPtr += 16;
- hcryp->CrypInCount -= 16;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
- /* Call the Input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- hcryp->pCrypOutBuffPtr += 16;
- hcryp->CrypOutCount -= 16;
- if(hcryp->CrypOutCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call Input transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES CTR decryption mode using Interrupt.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16
- * @param pPlainData: Pointer to the plaintext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Get the buffer addresses and sizes */
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pCypherData;
- hcryp->pCrypOutBuffPtr = pPlainData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES CTR mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR | CRYP_CR_ALGODIR);
-
- /* Set the Initialization Vector */
- CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- hcryp->pCrypInBuffPtr += 16;
- hcryp->CrypInCount -= 16;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
- /* Call the Input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- hcryp->pCrypOutBuffPtr += 16;
- hcryp->CrypOutCount -= 16;
- if(hcryp->CrypOutCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call Input transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES ECB encryption mode using DMA.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16 bytes
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pPlainData;
- outputaddr = (uint32_t)pCypherData;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES ECB mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
- /* Set the input and output addresses and start DMA transfer */
- CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES CBC encryption mode using DMA.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16.
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pPlainData;
- outputaddr = (uint32_t)pCypherData;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES ECB mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC);
-
- /* Set the Initialization Vector */
- CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
- /* Set the input and output addresses and start DMA transfer */
- CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES CTR encryption mode using DMA.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16.
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pPlainData;
- outputaddr = (uint32_t)pCypherData;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES ECB mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR);
-
- /* Set the Initialization Vector */
- CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Set the input and output addresses and start DMA transfer */
- CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES ECB decryption mode using DMA.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16 bytes
- * @param pPlainData: Pointer to the plaintext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
- uint32_t tickstart = 0;
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pCypherData;
- outputaddr = (uint32_t)pPlainData;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES Key mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
-
- /* Reset the ALGOMODE bits*/
- CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
-
- /* Set the CRYP peripheral in AES ECB decryption mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_ECB | CRYP_CR_ALGODIR);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Set the input and output addresses and start DMA transfer */
- CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES CBC encryption mode using DMA.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16 bytes
- * @param pPlainData: Pointer to the plaintext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
- uint32_t tickstart = 0;
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pCypherData;
- outputaddr = (uint32_t)pPlainData;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES Key mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_KEY | CRYP_CR_ALGODIR);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_SET(hcryp->Instance->SR, CRYP_FLAG_BUSY))
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYP_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
-
- /* Reset the ALGOMODE bits*/
- CRYP->CR &= (uint32_t)(~CRYP_CR_ALGOMODE);
-
- /* Set the CRYP peripheral in AES CBC decryption mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CBC | CRYP_CR_ALGODIR);
-
- /* Set the Initialization Vector */
- CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Set the input and output addresses and start DMA transfer */
- CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES CTR decryption mode using DMA.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16
- * @param pPlainData: Pointer to the plaintext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pCypherData;
- outputaddr = (uint32_t)pPlainData;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYP_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES CTR mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CTR | CRYP_CR_ALGODIR);
-
- /* Set the Initialization Vector */
- CRYP_SetInitVector(hcryp, hcryp->Init.pInitVect, CRYP_KEYSIZE_128B);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Set the input and output addresses and start DMA transfer */
- CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-
-/**
- * @}
- */
-
-/** @defgroup CRYP_Exported_Functions_Group3 DES processing functions
- * @brief processing functions.
- *
-@verbatim
- ==============================================================================
- ##### DES processing functions #####
- ==============================================================================
- [..] This section provides functions allowing to:
- (+) Encrypt plaintext using DES using ECB or CBC chaining modes
- (+) Decrypt cyphertext using ECB or CBC chaining modes
- [..] Three processing functions are available:
- (+) Polling mode
- (+) Interrupt mode
- (+) DMA mode
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the CRYP peripheral in DES ECB encryption mode.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Timeout: Specify Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
-{
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in DES ECB encryption mode */
- CRYP_SetDESECBMode(hcryp, 0);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Write Plain Data and Get Cypher Data */
- if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in DES ECB decryption mode.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Timeout: Specify Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
-{
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in DES ECB decryption mode */
- CRYP_SetDESECBMode(hcryp, CRYP_CR_ALGODIR);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Write Plain Data and Get Cypher Data */
- if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in DES CBC encryption mode.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Timeout: Specify Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
-{
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in DES CBC encryption mode */
- CRYP_SetDESCBCMode(hcryp, 0);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Write Plain Data and Get Cypher Data */
- if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in DES ECB decryption mode.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Timeout: Specify Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
-{
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in DES CBC decryption mode */
- CRYP_SetDESCBCMode(hcryp, CRYP_CR_ALGODIR);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Write Plain Data and Get Cypher Data */
- if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in DES ECB encryption mode using IT.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pPlainData;
- hcryp->pCrypOutBuffPtr = pCypherData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in DES ECB encryption mode */
- CRYP_SetDESECBMode(hcryp, 0);
-
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
-
- hcryp->pCrypInBuffPtr += 8;
- hcryp->CrypInCount -= 8;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
- /* Call the Input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
-
- hcryp->pCrypOutBuffPtr += 8;
- hcryp->CrypOutCount -= 8;
- if(hcryp->CrypOutCount == 0)
- {
- /* Disable IT */
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
- /* Disable CRYP */
- __HAL_CRYP_DISABLE(hcryp);
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call Input transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in DES CBC encryption mode using interrupt.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pPlainData;
- hcryp->pCrypOutBuffPtr = pCypherData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in DES CBC encryption mode */
- CRYP_SetDESCBCMode(hcryp, 0);
-
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
-
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
-
- hcryp->pCrypInBuffPtr += 8;
- hcryp->CrypInCount -= 8;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
- /* Call the Input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
-
- hcryp->pCrypOutBuffPtr += 8;
- hcryp->CrypOutCount -= 8;
- if(hcryp->CrypOutCount == 0)
- {
- /* Disable IT */
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
- /* Disable CRYP */
- __HAL_CRYP_DISABLE(hcryp);
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call Input transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in DES ECB decryption mode using IT.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pCypherData;
- hcryp->pCrypOutBuffPtr = pPlainData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in DES ECB decryption mode */
- CRYP_SetDESECBMode(hcryp, CRYP_CR_ALGODIR);
-
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
-
- hcryp->pCrypInBuffPtr += 8;
- hcryp->CrypInCount -= 8;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
- /* Call the Input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
-
- hcryp->pCrypOutBuffPtr += 8;
- hcryp->CrypOutCount -= 8;
- if(hcryp->CrypOutCount == 0)
- {
- /* Disable IT */
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
- /* Disable CRYP */
- __HAL_CRYP_DISABLE(hcryp);
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call Input transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in DES ECB decryption mode using interrupt.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pCypherData;
- hcryp->pCrypOutBuffPtr = pPlainData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in DES CBC decryption mode */
- CRYP_SetDESCBCMode(hcryp, CRYP_CR_ALGODIR);
-
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
-
- hcryp->pCrypInBuffPtr += 8;
- hcryp->CrypInCount -= 8;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
- /* Call the Input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
-
- hcryp->pCrypOutBuffPtr += 8;
- hcryp->CrypOutCount -= 8;
- if(hcryp->CrypOutCount == 0)
- {
- /* Disable IT */
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
- /* Disable CRYP */
- __HAL_CRYP_DISABLE(hcryp);
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call Input transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in DES ECB encryption mode using DMA.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pPlainData;
- outputaddr = (uint32_t)pCypherData;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in DES ECB encryption mode */
- CRYP_SetDESECBMode(hcryp, 0);
-
- /* Set the input and output addresses and start DMA transfer */
- CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief Initializes the CRYP peripheral in DES CBC encryption mode using DMA.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pPlainData;
- outputaddr = (uint32_t)pCypherData;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in DES CBC encryption mode */
- CRYP_SetDESCBCMode(hcryp, 0);
-
- /* Set the input and output addresses and start DMA transfer */
- CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief Initializes the CRYP peripheral in DES ECB decryption mode using DMA.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pCypherData;
- outputaddr = (uint32_t)pPlainData;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in DES ECB decryption mode */
- CRYP_SetDESECBMode(hcryp, CRYP_CR_ALGODIR);
-
- /* Set the input and output addresses and start DMA transfer */
- CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief Initializes the CRYP peripheral in DES ECB decryption mode using DMA.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pCypherData;
- outputaddr = (uint32_t)pPlainData;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in DES CBC decryption mode */
- CRYP_SetDESCBCMode(hcryp, CRYP_CR_ALGODIR);
-
- /* Set the input and output addresses and start DMA transfer */
- CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @}
- */
-
-/** @defgroup CRYP_Exported_Functions_Group4 TDES processing functions
- * @brief processing functions.
- *
-@verbatim
- ==============================================================================
- ##### TDES processing functions #####
- ==============================================================================
- [..] This section provides functions allowing to:
- (+) Encrypt plaintext using TDES based on ECB or CBC chaining modes
- (+) Decrypt cyphertext using TDES based on ECB or CBC chaining modes
- [..] Three processing functions are available:
- (+) Polling mode
- (+) Interrupt mode
- (+) DMA mode
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the CRYP peripheral in TDES ECB encryption mode
- * then encrypt pPlainData. The cypher data are available in pCypherData
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Timeout: Specify Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
-{
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in TDES ECB encryption mode */
- CRYP_SetTDESECBMode(hcryp, 0);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Write Plain Data and Get Cypher Data */
- if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in TDES ECB decryption mode
- * then decrypted pCypherData. The cypher data are available in pPlainData
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Timeout: Specify Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
-{
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in TDES ECB decryption mode */
- CRYP_SetTDESECBMode(hcryp, CRYP_CR_ALGODIR);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Write Cypher Data and Get Plain Data */
- if(CRYP_ProcessData2Words(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in TDES CBC encryption mode
- * then encrypt pPlainData. The cypher data are available in pCypherData
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Timeout: Specify Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
-{
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in TDES CBC encryption mode */
- CRYP_SetTDESCBCMode(hcryp, 0);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Write Plain Data and Get Cypher Data */
- if(CRYP_ProcessData2Words(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in TDES CBC decryption mode
- * then decrypted pCypherData. The cypher data are available in pPlainData
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Timeout: Specify Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
-{
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in TDES CBC decryption mode */
- CRYP_SetTDESCBCMode(hcryp, CRYP_CR_ALGODIR);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Write Cypher Data and Get Plain Data */
- if(CRYP_ProcessData2Words(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in TDES ECB encryption mode using interrupt.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pPlainData;
- hcryp->pCrypOutBuffPtr = pCypherData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in TDES ECB encryption mode */
- CRYP_SetTDESECBMode(hcryp, 0);
-
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
-
- hcryp->pCrypInBuffPtr += 8;
- hcryp->CrypInCount -= 8;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
- /* Call the Input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
-
- hcryp->pCrypOutBuffPtr += 8;
- hcryp->CrypOutCount -= 8;
- if(hcryp->CrypOutCount == 0)
- {
- /* Disable IT */
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
- /* Disable CRYP */
- __HAL_CRYP_DISABLE(hcryp);
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call the Output data transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in TDES CBC encryption mode.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pPlainData;
- hcryp->pCrypOutBuffPtr = pCypherData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in TDES CBC encryption mode */
- CRYP_SetTDESCBCMode(hcryp, 0);
-
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
-
- hcryp->pCrypInBuffPtr += 8;
- hcryp->CrypInCount -= 8;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
- /* Call the Input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
-
- hcryp->pCrypOutBuffPtr += 8;
- hcryp->CrypOutCount -= 8;
- if(hcryp->CrypOutCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
- /* Disable CRYP */
- __HAL_CRYP_DISABLE(hcryp);
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call Input transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in TDES ECB decryption mode.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pCypherData;
- hcryp->pCrypOutBuffPtr = pPlainData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in TDES ECB decryption mode */
- CRYP_SetTDESECBMode(hcryp, CRYP_CR_ALGODIR);
-
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
-
- hcryp->pCrypInBuffPtr += 8;
- hcryp->CrypInCount -= 8;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
- /* Call the Input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
-
- hcryp->pCrypOutBuffPtr += 8;
- hcryp->CrypOutCount -= 8;
- if(hcryp->CrypOutCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
- /* Disable CRYP */
- __HAL_CRYP_DISABLE(hcryp);
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call Input transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in TDES CBC decryption mode.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pPlainData: Pointer to the plaintext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pCypherData;
- hcryp->pCrypOutBuffPtr = pPlainData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in TDES CBC decryption mode */
- CRYP_SetTDESCBCMode(hcryp, CRYP_CR_ALGODIR);
-
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
-
- /* Enable CRYP */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
-
- hcryp->pCrypInBuffPtr += 8;
- hcryp->CrypInCount -= 8;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
- /* Call the Input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if(__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
-
- hcryp->pCrypOutBuffPtr += 8;
- hcryp->CrypOutCount -= 8;
- if(hcryp->CrypOutCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
- /* Disable CRYP */
- __HAL_CRYP_DISABLE(hcryp);
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call Input transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in TDES ECB encryption mode using DMA.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pPlainData;
- outputaddr = (uint32_t)pCypherData;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in TDES ECB encryption mode */
- CRYP_SetTDESECBMode(hcryp, 0);
-
- /* Set the input and output addresses and start DMA transfer */
- CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief Initializes the CRYP peripheral in TDES CBC encryption mode using DMA.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pPlainData;
- outputaddr = (uint32_t)pCypherData;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in TDES CBC encryption mode */
- CRYP_SetTDESCBCMode(hcryp, 0);
-
- /* Set the input and output addresses and start DMA transfer */
- CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief Initializes the CRYP peripheral in TDES ECB decryption mode using DMA.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pCypherData;
- outputaddr = (uint32_t)pPlainData;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in TDES ECB decryption mode */
- CRYP_SetTDESECBMode(hcryp, CRYP_CR_ALGODIR);
-
- /* Set the input and output addresses and start DMA transfer */
- CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief Initializes the CRYP peripheral in TDES CBC decryption mode using DMA.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 8
- * @param pPlainData: Pointer to the plaintext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pCypherData;
- outputaddr = (uint32_t)pPlainData;
-
- /* Change the CRYP state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Set CRYP peripheral in TDES CBC decryption mode */
- CRYP_SetTDESCBCMode(hcryp, CRYP_CR_ALGODIR);
-
- /* Set the input and output addresses and start DMA transfer */
- CRYP_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @}
- */
-
-/** @defgroup CRYP_Exported_Functions_Group5 DMA callback functions
- * @brief DMA callback functions.
- *
-@verbatim
- ==============================================================================
- ##### DMA callback functions #####
- ==============================================================================
- [..] This section provides DMA callback functions:
- (+) DMA Input data transfer complete
- (+) DMA Output data transfer complete
- (+) DMA error
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Input FIFO transfer completed callbacks.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @retval None
- */
-__weak void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_CRYP_InCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Output FIFO transfer completed callbacks.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @retval None
- */
-__weak void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_CRYP_OutCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief CRYP error callbacks.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @retval None
- */
- __weak void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_CRYP_ErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup CRYP_Exported_Functions_Group6 CRYP IRQ handler management
- * @brief CRYP IRQ handler.
- *
-@verbatim
- ==============================================================================
- ##### CRYP IRQ handler management #####
- ==============================================================================
-[..] This section provides CRYP IRQ handler function.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief This function handles CRYP interrupt request.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @retval None
- */
-void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp)
-{
- switch(CRYP->CR & CRYP_CR_ALGOMODE_DIRECTION)
- {
- case CRYP_CR_ALGOMODE_TDES_ECB_ENCRYPT:
- HAL_CRYP_TDESECB_Encrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- case CRYP_CR_ALGOMODE_TDES_ECB_DECRYPT:
- HAL_CRYP_TDESECB_Decrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- case CRYP_CR_ALGOMODE_TDES_CBC_ENCRYPT:
- HAL_CRYP_TDESCBC_Encrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- case CRYP_CR_ALGOMODE_TDES_CBC_DECRYPT:
- HAL_CRYP_TDESCBC_Decrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- case CRYP_CR_ALGOMODE_DES_ECB_ENCRYPT:
- HAL_CRYP_DESECB_Encrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- case CRYP_CR_ALGOMODE_DES_ECB_DECRYPT:
- HAL_CRYP_DESECB_Decrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- case CRYP_CR_ALGOMODE_DES_CBC_ENCRYPT:
- HAL_CRYP_DESCBC_Encrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- case CRYP_CR_ALGOMODE_DES_CBC_DECRYPT:
- HAL_CRYP_DESCBC_Decrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- case CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT:
- HAL_CRYP_AESECB_Encrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- case CRYP_CR_ALGOMODE_AES_ECB_DECRYPT:
- HAL_CRYP_AESECB_Decrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- case CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT:
- HAL_CRYP_AESCBC_Encrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- case CRYP_CR_ALGOMODE_AES_CBC_DECRYPT:
- HAL_CRYP_AESCBC_Decrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- case CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT:
- HAL_CRYP_AESCTR_Encrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- case CRYP_CR_ALGOMODE_AES_CTR_DECRYPT:
- HAL_CRYP_AESCTR_Decrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- default:
- break;
- }
-}
-
-/**
- * @}
- */
-
-/** @defgroup CRYP_Exported_Functions_Group7 Peripheral State functions
- * @brief Peripheral State functions.
- *
-@verbatim
- ==============================================================================
- ##### Peripheral State functions #####
- ==============================================================================
- [..]
- This subsection permits to get in run-time the status of the peripheral.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Returns the CRYP state.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @retval HAL state
- */
-HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp)
-{
- return hcryp->State;
-}
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx */
-
-#endif /* HAL_CRYP_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp_ex.c
deleted file mode 100644
index e957e9d..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cryp_ex.c
+++ /dev/null
@@ -1,3043 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_cryp_ex.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief Extended CRYP HAL module driver
- * This file provides firmware functions to manage the following
- * functionalities of CRYP extension peripheral:
- * + Extended AES processing functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- The CRYP Extension HAL driver can be used as follows:
- (#)Initialize the CRYP low level resources by implementing the HAL_CRYP_MspInit():
- (##) Enable the CRYP interface clock using __HAL_RCC_CRYP_CLK_ENABLE()
- (##) In case of using interrupts (e.g. HAL_CRYPEx_AESGCM_Encrypt_IT())
- (+++) Configure the CRYP interrupt priority using HAL_NVIC_SetPriority()
- (+++) Enable the CRYP IRQ handler using HAL_NVIC_EnableIRQ()
- (+) In CRYP IRQ handler, call HAL_CRYP_IRQHandler()
- (##) In case of using DMA to control data transfer (e.g. HAL_AES_ECB_Encrypt_DMA())
- (+++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
- (+++) Configure and enable two DMA streams one for managing data transfer from
- memory to peripheral (input stream) and another stream for managing data
- transfer from peripheral to memory (output stream)
- (+++) Associate the initialized DMA handle to the CRYP DMA handle
- using __HAL_LINKDMA()
- (+++) Configure the priority and enable the NVIC for the transfer complete
- interrupt on the two DMA Streams. The output stream should have higher
- priority than the input stream HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ()
- (#)Initialize the CRYP HAL using HAL_CRYP_Init(). This function configures mainly:
- (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit
- (##) The key size: 128, 192 and 256. This parameter is relevant only for AES
- (##) The encryption/decryption key. Its size depends on the algorithm
- used for encryption/decryption
- (##) The initialization vector (counter). It is not used ECB mode.
- (#)Three processing (encryption/decryption) functions are available:
- (##) Polling mode: encryption and decryption APIs are blocking functions
- i.e. they process the data and wait till the processing is finished
- e.g. HAL_CRYPEx_AESGCM_Encrypt()
- (##) Interrupt mode: encryption and decryption APIs are not blocking functions
- i.e. they process the data under interrupt
- e.g. HAL_CRYPEx_AESGCM_Encrypt_IT()
- (##) DMA mode: encryption and decryption APIs are not blocking functions
- i.e. the data transfer is ensured by DMA
- e.g. HAL_CRYPEx_AESGCM_Encrypt_DMA()
- (#)When the processing function is called at first time after HAL_CRYP_Init()
- the CRYP peripheral is initialized and processes the buffer in input.
- At second call, the processing function performs an append of the already
- processed buffer.
- When a new data block is to be processed, call HAL_CRYP_Init() then the
- processing function.
- (#)In AES-GCM and AES-CCM modes are an authenticated encryption algorithms
- which provide authentication messages.
- HAL_AES_GCM_Finish() and HAL_AES_CCM_Finish() are used to provide those
- authentication messages.
- Call those functions after the processing ones (polling, interrupt or DMA).
- e.g. in AES-CCM mode call HAL_CRYPEx_AESCCM_Encrypt() to encrypt the plain data
- then call HAL_CRYPEx_AESCCM_Finish() to get the authentication message
- @note: For CCM Encrypt/Decrypt API's, only DataType = 8-bit is supported by this version.
- @note: The HAL_CRYPEx_AESGCM_xxxx() implementation is limited to 32bits inputs data length
- (Plain/Cyphertext, Header) compared with GCM standards specifications (800-38D).
- (#)Call HAL_CRYP_DeInit() to deinitialize the CRYP peripheral.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup CRYPEx CRYPEx
- * @brief CRYP Extension HAL module driver.
- * @{
- */
-
-#ifdef HAL_CRYP_MODULE_ENABLED
-
-#if defined(STM32F437xx) || defined(STM32F439xx)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @addtogroup CRYPEx_Private_define
- * @{
- */
-#define CRYPEx_TIMEOUT_VALUE 1
-/**
- * @}
- */
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @defgroup CRYPEx_Private_Functions_prototypes CRYP Private Functions Prototypes
- * @{
- */
-static void CRYPEx_GCMCCM_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector);
-static void CRYPEx_GCMCCM_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize);
-static HAL_StatusTypeDef CRYPEx_GCMCCM_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t *Input, uint16_t Ilength, uint8_t *Output, uint32_t Timeout);
-static HAL_StatusTypeDef CRYPEx_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint32_t Timeout);
-static void CRYPEx_GCMCCM_DMAInCplt(DMA_HandleTypeDef *hdma);
-static void CRYPEx_GCMCCM_DMAOutCplt(DMA_HandleTypeDef *hdma);
-static void CRYPEx_GCMCCM_DMAError(DMA_HandleTypeDef *hdma);
-static void CRYPEx_GCMCCM_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr);
-/**
- * @}
- */
-
-/* Private functions ---------------------------------------------------------*/
-/** @addtogroup CRYPEx_Private_Functions
- * @{
- */
-
-/**
- * @brief DMA CRYP Input Data process complete callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void CRYPEx_GCMCCM_DMAInCplt(DMA_HandleTypeDef *hdma)
-{
- CRYP_HandleTypeDef* hcryp = ( CRYP_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- /* Disable the DMA transfer for input Fifo request by resetting the DIEN bit
- in the DMACR register */
- hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DIEN);
-
- /* Call input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
-}
-
-/**
- * @brief DMA CRYP Output Data process complete callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void CRYPEx_GCMCCM_DMAOutCplt(DMA_HandleTypeDef *hdma)
-{
- CRYP_HandleTypeDef* hcryp = ( CRYP_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- /* Disable the DMA transfer for output Fifo request by resetting the DOEN bit
- in the DMACR register */
- hcryp->Instance->DMACR &= (uint32_t)(~CRYP_DMACR_DOEN);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_DISABLE(hcryp);
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Call output data transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
-}
-
-/**
- * @brief DMA CRYP communication error callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void CRYPEx_GCMCCM_DMAError(DMA_HandleTypeDef *hdma)
-{
- CRYP_HandleTypeDef* hcryp = ( CRYP_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- hcryp->State= HAL_CRYP_STATE_READY;
- HAL_CRYP_ErrorCallback(hcryp);
-}
-
-/**
- * @brief Writes the Key in Key registers.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param Key: Pointer to Key buffer
- * @param KeySize: Size of Key
- * @retval None
- */
-static void CRYPEx_GCMCCM_SetKey(CRYP_HandleTypeDef *hcryp, uint8_t *Key, uint32_t KeySize)
-{
- uint32_t keyaddr = (uint32_t)Key;
-
- switch(KeySize)
- {
- case CRYP_KEYSIZE_256B:
- /* Key Initialisation */
- hcryp->Instance->K0LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K0RR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K1LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K1RR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
- break;
- case CRYP_KEYSIZE_192B:
- hcryp->Instance->K1LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K1RR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
- break;
- case CRYP_KEYSIZE_128B:
- hcryp->Instance->K2LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K2RR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K3LR = __REV(*(uint32_t*)(keyaddr));
- keyaddr+=4;
- hcryp->Instance->K3RR = __REV(*(uint32_t*)(keyaddr));
- break;
- default:
- break;
- }
-}
-
-/**
- * @brief Writes the InitVector/InitCounter in IV registers.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param InitVector: Pointer to InitVector/InitCounter buffer
- * @retval None
- */
-static void CRYPEx_GCMCCM_SetInitVector(CRYP_HandleTypeDef *hcryp, uint8_t *InitVector)
-{
- uint32_t ivaddr = (uint32_t)InitVector;
-
- hcryp->Instance->IV0LR = __REV(*(uint32_t*)(ivaddr));
- ivaddr+=4;
- hcryp->Instance->IV0RR = __REV(*(uint32_t*)(ivaddr));
- ivaddr+=4;
- hcryp->Instance->IV1LR = __REV(*(uint32_t*)(ivaddr));
- ivaddr+=4;
- hcryp->Instance->IV1RR = __REV(*(uint32_t*)(ivaddr));
-}
-
-/**
- * @brief Process Data: Writes Input data in polling mode and read the Output data.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param Input: Pointer to the Input buffer.
- * @param Ilength: Length of the Input buffer, must be a multiple of 16
- * @param Output: Pointer to the returned buffer
- * @param Timeout: Timeout value
- * @retval None
- */
-static HAL_StatusTypeDef CRYPEx_GCMCCM_ProcessData(CRYP_HandleTypeDef *hcryp, uint8_t *Input, uint16_t Ilength, uint8_t *Output, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
- uint32_t i = 0;
- uint32_t inputaddr = (uint32_t)Input;
- uint32_t outputaddr = (uint32_t)Output;
-
- for(i=0; (i < Ilength); i+=16)
- {
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /* Read the Output block from the OUT FIFO */
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- }
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Sets the header phase
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param Input: Pointer to the Input buffer.
- * @param Ilength: Length of the Input buffer, must be a multiple of 16
- * @param Timeout: Timeout value
- * @retval None
- */
-static HAL_StatusTypeDef CRYPEx_GCMCCM_SetHeaderPhase(CRYP_HandleTypeDef *hcryp, uint8_t* Input, uint16_t Ilength, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
- uint32_t loopcounter = 0;
- uint32_t headeraddr = (uint32_t)Input;
-
- /***************************** Header phase *********************************/
- if(hcryp->Init.HeaderSize != 0)
- {
- /* Select header phase */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE(hcryp);
-
- for(loopcounter = 0; (loopcounter < hcryp->Init.HeaderSize); loopcounter+=16)
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- }
-
- /* Wait until the complete message has been processed */
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Sets the DMA configuration and start the DMA transfer.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param inputaddr: Address of the Input buffer
- * @param Size: Size of the Input buffer, must be a multiple of 16
- * @param outputaddr: Address of the Output buffer
- * @retval None
- */
-static void CRYPEx_GCMCCM_SetDMAConfig(CRYP_HandleTypeDef *hcryp, uint32_t inputaddr, uint16_t Size, uint32_t outputaddr)
-{
- /* Set the CRYP DMA transfer complete callback */
- hcryp->hdmain->XferCpltCallback = CRYPEx_GCMCCM_DMAInCplt;
- /* Set the DMA error callback */
- hcryp->hdmain->XferErrorCallback = CRYPEx_GCMCCM_DMAError;
-
- /* Set the CRYP DMA transfer complete callback */
- hcryp->hdmaout->XferCpltCallback = CRYPEx_GCMCCM_DMAOutCplt;
- /* Set the DMA error callback */
- hcryp->hdmaout->XferErrorCallback = CRYPEx_GCMCCM_DMAError;
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Enable the DMA In DMA Stream */
- HAL_DMA_Start_IT(hcryp->hdmain, inputaddr, (uint32_t)&hcryp->Instance->DR, Size/4);
-
- /* Enable In DMA request */
- hcryp->Instance->DMACR = CRYP_DMACR_DIEN;
-
- /* Enable the DMA Out DMA Stream */
- HAL_DMA_Start_IT(hcryp->hdmaout, (uint32_t)&hcryp->Instance->DOUT, outputaddr, Size/4);
-
- /* Enable Out DMA request */
- hcryp->Instance->DMACR |= CRYP_DMACR_DOEN;
-}
-
-/**
- * @}
- */
-
-/* Exported functions---------------------------------------------------------*/
-/** @addtogroup CRYPEx_Exported_Functions
- * @{
- */
-
-/** @defgroup CRYPEx_Exported_Functions_Group1 Extended AES processing functions
- * @brief Extended processing functions.
- *
-@verbatim
- ==============================================================================
- ##### Extended AES processing functions #####
- ==============================================================================
- [..] This section provides functions allowing to:
- (+) Encrypt plaintext using AES-128/192/256 using GCM and CCM chaining modes
- (+) Decrypt cyphertext using AES-128/192/256 using GCM and CCM chaining modes
- (+) Finish the processing. This function is available only for GCM and CCM
- [..] Three processing methods are available:
- (+) Polling mode
- (+) Interrupt mode
- (+) DMA mode
-
-@endverbatim
- * @{
- */
-
-
-/**
- * @brief Initializes the CRYP peripheral in AES CCM encryption mode then
- * encrypt pPlainData. The cypher data are available in pCypherData.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
- uint32_t headersize = hcryp->Init.HeaderSize;
- uint32_t headeraddr = (uint32_t)hcryp->Init.Header;
- uint32_t loopcounter = 0;
- uint32_t bufferidx = 0;
- uint8_t blockb0[16] = {0};/* Block B0 */
- uint8_t ctr[16] = {0}; /* Counter */
- uint32_t b0addr = (uint32_t)blockb0;
-
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /************************ Formatting the header block *********************/
- if(headersize != 0)
- {
- /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
- if(headersize < 65280)
- {
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
- headersize += 2;
- }
- else
- {
- /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
- hcryp->Init.pScratch[bufferidx++] = 0xFF;
- hcryp->Init.pScratch[bufferidx++] = 0xFE;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
- headersize += 6;
- }
- /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
- for(loopcounter = 0; loopcounter < headersize; loopcounter++)
- {
- hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
- }
- /* Check if the header size is modulo 16 */
- if ((headersize % 16) != 0)
- {
- /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
- for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = 0;
- }
- /* Set the header size to modulo 16 */
- headersize = ((headersize/16) + 1) * 16;
- }
- /* Set the pointer headeraddr to hcryp->Init.pScratch */
- headeraddr = (uint32_t)hcryp->Init.pScratch;
- }
- /*********************** Formatting the block B0 **************************/
- if(headersize != 0)
- {
- blockb0[0] = 0x40;
- }
- /* Flags byte */
- /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
-
- for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
- {
- blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
- }
- for ( ; loopcounter < 13; loopcounter++)
- {
- blockb0[loopcounter+1] = 0;
- }
-
- blockb0[14] = (Size >> 8);
- blockb0[15] = (Size & 0xFF);
-
- /************************* Formatting the initial counter *****************/
- /* Byte 0:
- Bits 7 and 6 are reserved and shall be set to 0
- Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter blocks
- are distinct from B0
- Bits 0, 1, and 2 contain the same encoding of q as in B0
- */
- ctr[0] = blockb0[0] & 0x07;
- /* byte 1 to NonceSize is the IV (Nonce) */
- for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
- {
- ctr[loopcounter] = blockb0[loopcounter];
- }
- /* Set the LSB to 1 */
- ctr[15] |= 0x01;
-
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES CCM mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
-
- /* Select init phase */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
-
- b0addr = (uint32_t)blockb0;
- /* Write the blockb0 block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /***************************** Header phase *******************************/
- if(headersize != 0)
- {
- /* Select header phase */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE(hcryp);
-
- for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
- {
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- /* Write the header block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- }
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- /* Save formatted counter into the scratch buffer pScratch */
- for(loopcounter = 0; (loopcounter < 16); loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
- }
- /* Reset bit 0 */
- hcryp->Init.pScratch[15] &= 0xfe;
-
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Write Plain Data and Get Cypher Data */
- if(CRYPEx_GCMCCM_ProcessData(hcryp,pPlainData, Size, pCypherData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES GCM encryption mode then
- * encrypt pPlainData. The cypher data are available in pCypherData.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES GCM mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Set the header phase */
- if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Disable the CRYP peripheral */
- __HAL_CRYP_DISABLE(hcryp);
-
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Write Plain Data and Get Cypher Data */
- if(CRYPEx_GCMCCM_ProcessData(hcryp, pPlainData, Size, pCypherData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES GCM decryption mode then
- * decrypted pCypherData. The cypher data are available in pPlainData.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Size: Length of the cyphertext buffer, must be a multiple of 16
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES GCM decryption mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_DECRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Set the header phase */
- if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- /* Disable the CRYP peripheral */
- __HAL_CRYP_DISABLE(hcryp);
-
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Write Plain Data and Get Cypher Data */
- if(CRYPEx_GCMCCM_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Computes the authentication TAG.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param Size: Total length of the plain/cyphertext buffer
- * @param AuthTag: Pointer to the authentication buffer
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Finish(CRYP_HandleTypeDef *hcryp, uint32_t Size, uint8_t *AuthTag, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
- uint64_t headerlength = hcryp->Init.HeaderSize * 8; /* Header length in bits */
- uint64_t inputlength = Size * 8; /* input length in bits */
- uint32_t tagaddr = (uint32_t)AuthTag;
-
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_PROCESS)
- {
- /* Change the CRYP phase */
- hcryp->Phase = HAL_CRYP_PHASE_FINAL;
-
- /* Disable CRYP to start the final phase */
- __HAL_CRYP_DISABLE(hcryp);
-
- /* Select final phase */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_FINAL);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Write the number of bits in header (64 bits) followed by the number of bits
- in the payload */
- if(hcryp->Init.DataType == CRYP_DATATYPE_1B)
- {
- hcryp->Instance->DR = __RBIT(headerlength >> 32);
- hcryp->Instance->DR = __RBIT(headerlength);
- hcryp->Instance->DR = __RBIT(inputlength >> 32);
- hcryp->Instance->DR = __RBIT(inputlength);
- }
- else if(hcryp->Init.DataType == CRYP_DATATYPE_8B)
- {
- hcryp->Instance->DR = __REV(headerlength >> 32);
- hcryp->Instance->DR = __REV(headerlength);
- hcryp->Instance->DR = __REV(inputlength >> 32);
- hcryp->Instance->DR = __REV(inputlength);
- }
- else if(hcryp->Init.DataType == CRYP_DATATYPE_16B)
- {
- hcryp->Instance->DR = __ROR((uint32_t)(headerlength >> 32), 16);
- hcryp->Instance->DR = __ROR((uint32_t)headerlength, 16);
- hcryp->Instance->DR = __ROR((uint32_t)(inputlength >> 32), 16);
- hcryp->Instance->DR = __ROR((uint32_t)inputlength, 16);
- }
- else if(hcryp->Init.DataType == CRYP_DATATYPE_32B)
- {
- hcryp->Instance->DR = (uint32_t)(headerlength >> 32);
- hcryp->Instance->DR = (uint32_t)(headerlength);
- hcryp->Instance->DR = (uint32_t)(inputlength >> 32);
- hcryp->Instance->DR = (uint32_t)(inputlength);
- }
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Read the Auth TAG in the IN FIFO */
- *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
- tagaddr+=4;
- *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
- tagaddr+=4;
- *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
- tagaddr+=4;
- *(uint32_t*)(tagaddr) = hcryp->Instance->DOUT;
- }
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Computes the authentication TAG for AES CCM mode.
- * @note This API is called after HAL_AES_CCM_Encrypt()/HAL_AES_CCM_Decrypt()
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param AuthTag: Pointer to the authentication buffer
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Finish(CRYP_HandleTypeDef *hcryp, uint8_t *AuthTag, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
- uint32_t tagaddr = (uint32_t)AuthTag;
- uint32_t ctraddr = (uint32_t)hcryp->Init.pScratch;
- uint32_t temptag[4] = {0}; /* Temporary TAG (MAC) */
- uint32_t loopcounter;
-
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_PROCESS)
- {
- /* Change the CRYP phase */
- hcryp->Phase = HAL_CRYP_PHASE_FINAL;
-
- /* Disable CRYP to start the final phase */
- __HAL_CRYP_DISABLE(hcryp);
-
- /* Select final phase */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_FINAL);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Write the counter block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)ctraddr;
- ctraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)ctraddr;
- ctraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)ctraddr;
- ctraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)ctraddr;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_OFNE))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Read the Auth TAG in the IN FIFO */
- temptag[0] = hcryp->Instance->DOUT;
- temptag[1] = hcryp->Instance->DOUT;
- temptag[2] = hcryp->Instance->DOUT;
- temptag[3] = hcryp->Instance->DOUT;
- }
-
- /* Copy temporary authentication TAG in user TAG buffer */
- for(loopcounter = 0; loopcounter < hcryp->Init.TagSize ; loopcounter++)
- {
- /* Set the authentication TAG buffer */
- *((uint8_t*)tagaddr+loopcounter) = *((uint8_t*)temptag+loopcounter);
- }
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES CCM decryption mode then
- * decrypted pCypherData. The cypher data are available in pPlainData.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
- uint32_t headersize = hcryp->Init.HeaderSize;
- uint32_t headeraddr = (uint32_t)hcryp->Init.Header;
- uint32_t loopcounter = 0;
- uint32_t bufferidx = 0;
- uint8_t blockb0[16] = {0};/* Block B0 */
- uint8_t ctr[16] = {0}; /* Counter */
- uint32_t b0addr = (uint32_t)blockb0;
-
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /************************ Formatting the header block *********************/
- if(headersize != 0)
- {
- /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
- if(headersize < 65280)
- {
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
- headersize += 2;
- }
- else
- {
- /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
- hcryp->Init.pScratch[bufferidx++] = 0xFF;
- hcryp->Init.pScratch[bufferidx++] = 0xFE;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
- headersize += 6;
- }
- /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
- for(loopcounter = 0; loopcounter < headersize; loopcounter++)
- {
- hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
- }
- /* Check if the header size is modulo 16 */
- if ((headersize % 16) != 0)
- {
- /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
- for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = 0;
- }
- /* Set the header size to modulo 16 */
- headersize = ((headersize/16) + 1) * 16;
- }
- /* Set the pointer headeraddr to hcryp->Init.pScratch */
- headeraddr = (uint32_t)hcryp->Init.pScratch;
- }
- /*********************** Formatting the block B0 **************************/
- if(headersize != 0)
- {
- blockb0[0] = 0x40;
- }
- /* Flags byte */
- /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
-
- for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
- {
- blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
- }
- for ( ; loopcounter < 13; loopcounter++)
- {
- blockb0[loopcounter+1] = 0;
- }
-
- blockb0[14] = (Size >> 8);
- blockb0[15] = (Size & 0xFF);
-
- /************************* Formatting the initial counter *****************/
- /* Byte 0:
- Bits 7 and 6 are reserved and shall be set to 0
- Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter
- blocks are distinct from B0
- Bits 0, 1, and 2 contain the same encoding of q as in B0
- */
- ctr[0] = blockb0[0] & 0x07;
- /* byte 1 to NonceSize is the IV (Nonce) */
- for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
- {
- ctr[loopcounter] = blockb0[loopcounter];
- }
- /* Set the LSB to 1 */
- ctr[15] |= 0x01;
-
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES CCM mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_DECRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
-
- /* Select init phase */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
-
- b0addr = (uint32_t)blockb0;
- /* Write the blockb0 block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /***************************** Header phase *******************************/
- if(headersize != 0)
- {
- /* Select header phase */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
-
- /* Enable Crypto processor */
- __HAL_CRYP_ENABLE(hcryp);
-
- for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /* Write the header block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- }
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- /* Save formatted counter into the scratch buffer pScratch */
- for(loopcounter = 0; (loopcounter < 16); loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
- }
- /* Reset bit 0 */
- hcryp->Init.pScratch[15] &= 0xfe;
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Write Plain Data and Get Cypher Data */
- if(CRYPEx_GCMCCM_ProcessData(hcryp, pCypherData, Size, pPlainData, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES GCM encryption mode using IT.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t tickstart = 0;
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Get the buffer addresses and sizes */
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pPlainData;
- hcryp->pCrypOutBuffPtr = pCypherData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES GCM mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Enable CRYP to start the init phase */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
-
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
-
- }
- }
-
- /* Set the header phase */
- if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, 1) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- /* Disable the CRYP peripheral */
- __HAL_CRYP_DISABLE(hcryp);
-
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- if(Size != 0)
- {
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE(hcryp);
- }
- else
- {
- /* Process Locked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP state and phase */
- hcryp->State = HAL_CRYP_STATE_READY;
- }
- /* Return function status */
- return HAL_OK;
- }
- else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- hcryp->pCrypInBuffPtr += 16;
- hcryp->CrypInCount -= 16;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
- /* Call the Input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- hcryp->pCrypOutBuffPtr += 16;
- hcryp->CrypOutCount -= 16;
- if(hcryp->CrypOutCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call Input transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES CCM encryption mode using interrupt.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t tickstart = 0;
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- uint32_t headersize = hcryp->Init.HeaderSize;
- uint32_t headeraddr = (uint32_t)hcryp->Init.Header;
- uint32_t loopcounter = 0;
- uint32_t bufferidx = 0;
- uint8_t blockb0[16] = {0};/* Block B0 */
- uint8_t ctr[16] = {0}; /* Counter */
- uint32_t b0addr = (uint32_t)blockb0;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pPlainData;
- hcryp->pCrypOutBuffPtr = pCypherData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /************************ Formatting the header block *******************/
- if(headersize != 0)
- {
- /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
- if(headersize < 65280)
- {
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
- headersize += 2;
- }
- else
- {
- /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
- hcryp->Init.pScratch[bufferidx++] = 0xFF;
- hcryp->Init.pScratch[bufferidx++] = 0xFE;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
- headersize += 6;
- }
- /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
- for(loopcounter = 0; loopcounter < headersize; loopcounter++)
- {
- hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
- }
- /* Check if the header size is modulo 16 */
- if ((headersize % 16) != 0)
- {
- /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
- for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = 0;
- }
- /* Set the header size to modulo 16 */
- headersize = ((headersize/16) + 1) * 16;
- }
- /* Set the pointer headeraddr to hcryp->Init.pScratch */
- headeraddr = (uint32_t)hcryp->Init.pScratch;
- }
- /*********************** Formatting the block B0 ************************/
- if(headersize != 0)
- {
- blockb0[0] = 0x40;
- }
- /* Flags byte */
- /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
-
- for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
- {
- blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
- }
- for ( ; loopcounter < 13; loopcounter++)
- {
- blockb0[loopcounter+1] = 0;
- }
-
- blockb0[14] = (Size >> 8);
- blockb0[15] = (Size & 0xFF);
-
- /************************* Formatting the initial counter ***************/
- /* Byte 0:
- Bits 7 and 6 are reserved and shall be set to 0
- Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter
- blocks are distinct from B0
- Bits 0, 1, and 2 contain the same encoding of q as in B0
- */
- ctr[0] = blockb0[0] & 0x07;
- /* byte 1 to NonceSize is the IV (Nonce) */
- for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
- {
- ctr[loopcounter] = blockb0[loopcounter];
- }
- /* Set the LSB to 1 */
- ctr[15] |= 0x01;
-
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES CCM mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
-
- /* Select init phase */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
-
- b0addr = (uint32_t)blockb0;
- /* Write the blockb0 block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- /***************************** Header phase *****************************/
- if(headersize != 0)
- {
- /* Select header phase */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
-
- /* Enable Crypto processor */
- __HAL_CRYP_ENABLE(hcryp);
-
- for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- /* Write the header block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- }
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /* Save formatted counter into the scratch buffer pScratch */
- for(loopcounter = 0; (loopcounter < 16); loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
- }
- /* Reset bit 0 */
- hcryp->Init.pScratch[15] &= 0xfe;
-
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- if(Size != 0)
- {
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE(hcryp);
- }
- else
- {
- /* Change the CRYP state and phase */
- hcryp->State = HAL_CRYP_STATE_READY;
- }
-
- /* Return function status */
- return HAL_OK;
- }
- else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- hcryp->pCrypInBuffPtr += 16;
- hcryp->CrypInCount -= 16;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
- /* Call Input transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- hcryp->pCrypOutBuffPtr += 16;
- hcryp->CrypOutCount -= 16;
- if(hcryp->CrypOutCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call Input transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES GCM decryption mode using IT.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Size: Length of the cyphertext buffer, must be a multiple of 16
- * @param pPlainData: Pointer to the plaintext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
- uint32_t tickstart = 0;
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- /* Get the buffer addresses and sizes */
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pCypherData;
- hcryp->pCrypOutBuffPtr = pPlainData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES GCM decryption mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_DECRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Enable CRYP to start the init phase */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
-
- /* Set the header phase */
- if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, 1) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- /* Disable the CRYP peripheral */
- __HAL_CRYP_DISABLE(hcryp);
-
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- if(Size != 0)
- {
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE(hcryp);
- }
- else
- {
- /* Process Locked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP state and phase */
- hcryp->State = HAL_CRYP_STATE_READY;
- }
-
- /* Return function status */
- return HAL_OK;
- }
- else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- hcryp->pCrypInBuffPtr += 16;
- hcryp->CrypInCount -= 16;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
- /* Call the Input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- hcryp->pCrypOutBuffPtr += 16;
- hcryp->CrypOutCount -= 16;
- if(hcryp->CrypOutCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call Input transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES CCM decryption mode using interrupt
- * then decrypted pCypherData. The cypher data are available in pPlainData.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16
- * @param pPlainData: Pointer to the plaintext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
- uint32_t tickstart = 0;
- uint32_t headersize = hcryp->Init.HeaderSize;
- uint32_t headeraddr = (uint32_t)hcryp->Init.Header;
- uint32_t loopcounter = 0;
- uint32_t bufferidx = 0;
- uint8_t blockb0[16] = {0};/* Block B0 */
- uint8_t ctr[16] = {0}; /* Counter */
- uint32_t b0addr = (uint32_t)blockb0;
-
- if(hcryp->State == HAL_CRYP_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pCypherData;
- hcryp->pCrypOutBuffPtr = pPlainData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /************************ Formatting the header block *******************/
- if(headersize != 0)
- {
- /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
- if(headersize < 65280)
- {
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
- headersize += 2;
- }
- else
- {
- /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
- hcryp->Init.pScratch[bufferidx++] = 0xFF;
- hcryp->Init.pScratch[bufferidx++] = 0xFE;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
- headersize += 6;
- }
- /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
- for(loopcounter = 0; loopcounter < headersize; loopcounter++)
- {
- hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
- }
- /* Check if the header size is modulo 16 */
- if ((headersize % 16) != 0)
- {
- /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
- for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = 0;
- }
- /* Set the header size to modulo 16 */
- headersize = ((headersize/16) + 1) * 16;
- }
- /* Set the pointer headeraddr to hcryp->Init.pScratch */
- headeraddr = (uint32_t)hcryp->Init.pScratch;
- }
- /*********************** Formatting the block B0 ************************/
- if(headersize != 0)
- {
- blockb0[0] = 0x40;
- }
- /* Flags byte */
- /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
-
- for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
- {
- blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
- }
- for ( ; loopcounter < 13; loopcounter++)
- {
- blockb0[loopcounter+1] = 0;
- }
-
- blockb0[14] = (Size >> 8);
- blockb0[15] = (Size & 0xFF);
-
- /************************* Formatting the initial counter ***************/
- /* Byte 0:
- Bits 7 and 6 are reserved and shall be set to 0
- Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter
- blocks are distinct from B0
- Bits 0, 1, and 2 contain the same encoding of q as in B0
- */
- ctr[0] = blockb0[0] & 0x07;
- /* byte 1 to NonceSize is the IV (Nonce) */
- for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
- {
- ctr[loopcounter] = blockb0[loopcounter];
- }
- /* Set the LSB to 1 */
- ctr[15] |= 0x01;
-
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES CCM mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_DECRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
-
- /* Select init phase */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
-
- b0addr = (uint32_t)blockb0;
- /* Write the blockb0 block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- /***************************** Header phase *****************************/
- if(headersize != 0)
- {
- /* Select header phase */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
-
- /* Enable Crypto processor */
- __HAL_CRYP_ENABLE(hcryp);
-
- for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- /* Write the header block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- }
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /* Save formatted counter into the scratch buffer pScratch */
- for(loopcounter = 0; (loopcounter < 16); loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
- }
- /* Reset bit 0 */
- hcryp->Init.pScratch[15] &= 0xfe;
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Enable Interrupts */
- __HAL_CRYP_ENABLE_IT(hcryp, CRYP_IT_INI | CRYP_IT_OUTI);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_INI))
- {
- inputaddr = (uint32_t)hcryp->pCrypInBuffPtr;
- /* Write the Input block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- inputaddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(inputaddr);
- hcryp->pCrypInBuffPtr += 16;
- hcryp->CrypInCount -= 16;
- if(hcryp->CrypInCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_INI);
- /* Call the Input data transfer complete callback */
- HAL_CRYP_InCpltCallback(hcryp);
- }
- }
- else if (__HAL_CRYP_GET_IT(hcryp, CRYP_IT_OUTI))
- {
- outputaddr = (uint32_t)hcryp->pCrypOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = hcryp->Instance->DOUT;
- hcryp->pCrypOutBuffPtr += 16;
- hcryp->CrypOutCount -= 16;
- if(hcryp->CrypOutCount == 0)
- {
- __HAL_CRYP_DISABLE_IT(hcryp, CRYP_IT_OUTI);
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_READY;
- /* Call Input transfer complete callback */
- HAL_CRYP_OutCpltCallback(hcryp);
- }
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES GCM encryption mode using DMA.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t tickstart = 0;
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pPlainData;
- outputaddr = (uint32_t)pCypherData;
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES GCM mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Enable CRYP to start the init phase */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the header phase */
- if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, 1) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- /* Disable the CRYP peripheral */
- __HAL_CRYP_DISABLE(hcryp);
-
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Set the input and output addresses and start DMA transfer */
- CRYPEx_GCMCCM_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Unlock process */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES CCM encryption mode using interrupt.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pPlainData: Pointer to the plaintext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16
- * @param pCypherData: Pointer to the cyphertext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData)
-{
- uint32_t tickstart = 0;
- uint32_t inputaddr;
- uint32_t outputaddr;
- uint32_t headersize;
- uint32_t headeraddr;
- uint32_t loopcounter = 0;
- uint32_t bufferidx = 0;
- uint8_t blockb0[16] = {0};/* Block B0 */
- uint8_t ctr[16] = {0}; /* Counter */
- uint32_t b0addr = (uint32_t)blockb0;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pPlainData;
- outputaddr = (uint32_t)pCypherData;
-
- headersize = hcryp->Init.HeaderSize;
- headeraddr = (uint32_t)hcryp->Init.Header;
-
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pPlainData;
- hcryp->pCrypOutBuffPtr = pCypherData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /************************ Formatting the header block *******************/
- if(headersize != 0)
- {
- /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
- if(headersize < 65280)
- {
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
- headersize += 2;
- }
- else
- {
- /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
- hcryp->Init.pScratch[bufferidx++] = 0xFF;
- hcryp->Init.pScratch[bufferidx++] = 0xFE;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
- headersize += 6;
- }
- /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
- for(loopcounter = 0; loopcounter < headersize; loopcounter++)
- {
- hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
- }
- /* Check if the header size is modulo 16 */
- if ((headersize % 16) != 0)
- {
- /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
- for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = 0;
- }
- /* Set the header size to modulo 16 */
- headersize = ((headersize/16) + 1) * 16;
- }
- /* Set the pointer headeraddr to hcryp->Init.pScratch */
- headeraddr = (uint32_t)hcryp->Init.pScratch;
- }
- /*********************** Formatting the block B0 ************************/
- if(headersize != 0)
- {
- blockb0[0] = 0x40;
- }
- /* Flags byte */
- /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
-
- for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
- {
- blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
- }
- for ( ; loopcounter < 13; loopcounter++)
- {
- blockb0[loopcounter+1] = 0;
- }
-
- blockb0[14] = (Size >> 8);
- blockb0[15] = (Size & 0xFF);
-
- /************************* Formatting the initial counter ***************/
- /* Byte 0:
- Bits 7 and 6 are reserved and shall be set to 0
- Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter
- blocks are distinct from B0
- Bits 0, 1, and 2 contain the same encoding of q as in B0
- */
- ctr[0] = blockb0[0] & 0x07;
- /* byte 1 to NonceSize is the IV (Nonce) */
- for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
- {
- ctr[loopcounter] = blockb0[loopcounter];
- }
- /* Set the LSB to 1 */
- ctr[15] |= 0x01;
-
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES CCM mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
-
- /* Select init phase */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
-
- b0addr = (uint32_t)blockb0;
- /* Write the blockb0 block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- /***************************** Header phase *****************************/
- if(headersize != 0)
- {
- /* Select header phase */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
-
- /* Enable Crypto processor */
- __HAL_CRYP_ENABLE(hcryp);
-
- for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- /* Write the header block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- }
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /* Save formatted counter into the scratch buffer pScratch */
- for(loopcounter = 0; (loopcounter < 16); loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
- }
- /* Reset bit 0 */
- hcryp->Init.pScratch[15] &= 0xfe;
-
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Set the input and output addresses and start DMA transfer */
- CRYPEx_GCMCCM_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Unlock process */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES GCM decryption mode using DMA.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer.
- * @param Size: Length of the cyphertext buffer, must be a multiple of 16
- * @param pPlainData: Pointer to the plaintext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
- uint32_t tickstart = 0;
- uint32_t inputaddr;
- uint32_t outputaddr;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pCypherData;
- outputaddr = (uint32_t)pPlainData;
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES GCM decryption mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_GCM_DECRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, hcryp->Init.pInitVect);
-
- /* Enable CRYP to start the init phase */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
-
- /* Set the header phase */
- if(CRYPEx_GCMCCM_SetHeaderPhase(hcryp, hcryp->Init.Header, hcryp->Init.HeaderSize, 1) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- /* Disable the CRYP peripheral */
- __HAL_CRYP_DISABLE(hcryp);
-
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
-
- /* Set the input and output addresses and start DMA transfer */
- CRYPEx_GCMCCM_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Unlock process */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief Initializes the CRYP peripheral in AES CCM decryption mode using DMA
- * then decrypted pCypherData. The cypher data are available in pPlainData.
- * @param hcryp: pointer to a CRYP_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @param pCypherData: Pointer to the cyphertext buffer
- * @param Size: Length of the plaintext buffer, must be a multiple of 16
- * @param pPlainData: Pointer to the plaintext buffer
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData)
-{
- uint32_t tickstart = 0;
- uint32_t inputaddr;
- uint32_t outputaddr;
- uint32_t headersize;
- uint32_t headeraddr;
- uint32_t loopcounter = 0;
- uint32_t bufferidx = 0;
- uint8_t blockb0[16] = {0};/* Block B0 */
- uint8_t ctr[16] = {0}; /* Counter */
- uint32_t b0addr = (uint32_t)blockb0;
-
- if((hcryp->State == HAL_CRYP_STATE_READY) || (hcryp->Phase == HAL_CRYP_PHASE_PROCESS))
- {
- /* Process Locked */
- __HAL_LOCK(hcryp);
-
- inputaddr = (uint32_t)pCypherData;
- outputaddr = (uint32_t)pPlainData;
-
- headersize = hcryp->Init.HeaderSize;
- headeraddr = (uint32_t)hcryp->Init.Header;
-
- hcryp->CrypInCount = Size;
- hcryp->pCrypInBuffPtr = pCypherData;
- hcryp->pCrypOutBuffPtr = pPlainData;
- hcryp->CrypOutCount = Size;
-
- /* Change the CRYP peripheral state */
- hcryp->State = HAL_CRYP_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hcryp->Phase == HAL_CRYP_PHASE_READY)
- {
- /************************ Formatting the header block *******************/
- if(headersize != 0)
- {
- /* Check that the associated data (or header) length is lower than 2^16 - 2^8 = 65536 - 256 = 65280 */
- if(headersize < 65280)
- {
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize >> 8) & 0xFF);
- hcryp->Init.pScratch[bufferidx++] = (uint8_t) ((headersize) & 0xFF);
- headersize += 2;
- }
- else
- {
- /* Header is encoded as 0xff || 0xfe || [headersize]32, i.e., six octets */
- hcryp->Init.pScratch[bufferidx++] = 0xFF;
- hcryp->Init.pScratch[bufferidx++] = 0xFE;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0xff000000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x00ff0000;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x0000ff00;
- hcryp->Init.pScratch[bufferidx++] = headersize & 0x000000ff;
- headersize += 6;
- }
- /* Copy the header buffer in internal buffer "hcryp->Init.pScratch" */
- for(loopcounter = 0; loopcounter < headersize; loopcounter++)
- {
- hcryp->Init.pScratch[bufferidx++] = hcryp->Init.Header[loopcounter];
- }
- /* Check if the header size is modulo 16 */
- if ((headersize % 16) != 0)
- {
- /* Padd the header buffer with 0s till the hcryp->Init.pScratch length is modulo 16 */
- for(loopcounter = headersize; loopcounter <= ((headersize/16) + 1) * 16; loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = 0;
- }
- /* Set the header size to modulo 16 */
- headersize = ((headersize/16) + 1) * 16;
- }
- /* Set the pointer headeraddr to hcryp->Init.pScratch */
- headeraddr = (uint32_t)hcryp->Init.pScratch;
- }
- /*********************** Formatting the block B0 ************************/
- if(headersize != 0)
- {
- blockb0[0] = 0x40;
- }
- /* Flags byte */
- /* blockb0[0] |= 0u | (((( (uint8_t) hcryp->Init.TagSize - 2) / 2) & 0x07 ) << 3 ) | ( ( (uint8_t) (15 - hcryp->Init.IVSize) - 1) & 0x07) */
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)(((uint8_t)(hcryp->Init.TagSize - (uint8_t)(2))) >> 1) & (uint8_t)0x07 ) << 3);
- blockb0[0] |= (uint8_t)((uint8_t)((uint8_t)((uint8_t)(15) - hcryp->Init.IVSize) - (uint8_t)1) & (uint8_t)0x07);
-
- for (loopcounter = 0; loopcounter < hcryp->Init.IVSize; loopcounter++)
- {
- blockb0[loopcounter+1] = hcryp->Init.pInitVect[loopcounter];
- }
- for ( ; loopcounter < 13; loopcounter++)
- {
- blockb0[loopcounter+1] = 0;
- }
-
- blockb0[14] = (Size >> 8);
- blockb0[15] = (Size & 0xFF);
-
- /************************* Formatting the initial counter ***************/
- /* Byte 0:
- Bits 7 and 6 are reserved and shall be set to 0
- Bits 3, 4, and 5 shall also be set to 0, to ensure that all the counter
- blocks are distinct from B0
- Bits 0, 1, and 2 contain the same encoding of q as in B0
- */
- ctr[0] = blockb0[0] & 0x07;
- /* byte 1 to NonceSize is the IV (Nonce) */
- for(loopcounter = 1; loopcounter < hcryp->Init.IVSize + 1; loopcounter++)
- {
- ctr[loopcounter] = blockb0[loopcounter];
- }
- /* Set the LSB to 1 */
- ctr[15] |= 0x01;
-
- /* Set the key */
- CRYPEx_GCMCCM_SetKey(hcryp, hcryp->Init.pKey, hcryp->Init.KeySize);
-
- /* Set the CRYP peripheral in AES CCM mode */
- __HAL_CRYP_SET_MODE(hcryp, CRYP_CR_ALGOMODE_AES_CCM_DECRYPT);
-
- /* Set the Initialization Vector */
- CRYPEx_GCMCCM_SetInitVector(hcryp, ctr);
-
- /* Select init phase */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_INIT);
-
- b0addr = (uint32_t)blockb0;
- /* Write the blockb0 block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
- b0addr+=4;
- hcryp->Instance->DR = *(uint32_t*)(b0addr);
-
- /* Enable the CRYP peripheral */
- __HAL_CRYP_ENABLE(hcryp);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((CRYP->CR & CRYP_CR_CRYPEN) == CRYP_CR_CRYPEN)
- {
- /* Check for the Timeout */
-
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
-
- }
- }
- /***************************** Header phase *****************************/
- if(headersize != 0)
- {
- /* Select header phase */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_HEADER);
-
- /* Enable Crypto processor */
- __HAL_CRYP_ENABLE(hcryp);
-
- for(loopcounter = 0; (loopcounter < headersize); loopcounter+=16)
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(hcryp->Instance->SR, CRYP_FLAG_IFEM))
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- /* Write the header block in the IN FIFO */
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- hcryp->Instance->DR = *(uint32_t*)(headeraddr);
- headeraddr+=4;
- }
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((hcryp->Instance->SR & CRYP_FLAG_BUSY) == CRYP_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > CRYPEx_TIMEOUT_VALUE)
- {
- /* Change state */
- hcryp->State = HAL_CRYP_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hcryp);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /* Save formatted counter into the scratch buffer pScratch */
- for(loopcounter = 0; (loopcounter < 16); loopcounter++)
- {
- hcryp->Init.pScratch[loopcounter] = ctr[loopcounter];
- }
- /* Reset bit 0 */
- hcryp->Init.pScratch[15] &= 0xfe;
- /* Select payload phase once the header phase is performed */
- __HAL_CRYP_SET_PHASE(hcryp, CRYP_PHASE_PAYLOAD);
-
- /* Flush FIFO */
- __HAL_CRYP_FIFO_FLUSH(hcryp);
-
- /* Set the phase */
- hcryp->Phase = HAL_CRYP_PHASE_PROCESS;
- }
- /* Set the input and output addresses and start DMA transfer */
- CRYPEx_GCMCCM_SetDMAConfig(hcryp, inputaddr, Size, outputaddr);
-
- /* Unlock process */
- __HAL_UNLOCK(hcryp);
-
- /* Return function status */
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @}
- */
-
-/** @defgroup CRYPEx_Exported_Functions_Group2 CRYPEx IRQ handler management
- * @brief CRYPEx IRQ handler.
- *
-@verbatim
- ==============================================================================
- ##### CRYPEx IRQ handler management #####
- ==============================================================================
-[..] This section provides CRYPEx IRQ handler function.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief This function handles CRYPEx interrupt request.
- * @param hcryp: pointer to a CRYPEx_HandleTypeDef structure that contains
- * the configuration information for CRYP module
- * @retval None
- */
-
-void HAL_CRYPEx_GCMCCM_IRQHandler(CRYP_HandleTypeDef *hcryp)
-{
- switch(CRYP->CR & CRYP_CR_ALGOMODE_DIRECTION)
- {
- case CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT:
- HAL_CRYPEx_AESGCM_Encrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- case CRYP_CR_ALGOMODE_AES_GCM_DECRYPT:
- HAL_CRYPEx_AESGCM_Decrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- case CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT:
- HAL_CRYPEx_AESCCM_Encrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- case CRYP_CR_ALGOMODE_AES_CCM_DECRYPT:
- HAL_CRYPEx_AESCCM_Decrypt_IT(hcryp, NULL, 0, NULL);
- break;
-
- default:
- break;
- }
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-#endif /* STM32F437xx || STM32F439xx */
-
-#endif /* HAL_CRYP_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac.c
deleted file mode 100644
index 552ca85..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac.c
+++ /dev/null
@@ -1,953 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_dac.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief DAC HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Digital to Analog Converter (DAC) peripheral:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral Control functions
- * + Peripheral State and Errors functions
- *
- *
- @verbatim
- ==============================================================================
- ##### DAC Peripheral features #####
- ==============================================================================
- [..]
- *** DAC Channels ***
- ====================
- [..]
- The device integrates two 12-bit Digital Analog Converters that can
- be used independently or simultaneously (dual mode):
- (#) DAC channel1 with DAC_OUT1 (PA4) as output
- (#) DAC channel2 with DAC_OUT2 (PA5) as output
-
- *** DAC Triggers ***
- ====================
- [..]
- Digital to Analog conversion can be non-triggered using DAC_TRIGGER_NONE
- and DAC_OUT1/DAC_OUT2 is available once writing to DHRx register.
- [..]
- Digital to Analog conversion can be triggered by:
- (#) External event: EXTI Line 9 (any GPIOx_Pin9) using DAC_TRIGGER_EXT_IT9.
- The used pin (GPIOx_Pin9) must be configured in input mode.
-
- (#) Timers TRGO: TIM2, TIM4, TIM5, TIM6, TIM7 and TIM8
- (DAC_TRIGGER_T2_TRGO, DAC_TRIGGER_T4_TRGO...)
-
- (#) Software using DAC_TRIGGER_SOFTWARE
-
- *** DAC Buffer mode feature ***
- ===============================
- [..]
- Each DAC channel integrates an output buffer that can be used to
- reduce the output impedance, and to drive external loads directly
- without having to add an external operational amplifier.
- To enable, the output buffer use
- sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
- [..]
- (@) Refer to the device datasheet for more details about output
- impedance value with and without output buffer.
-
- *** DAC wave generation feature ***
- ===================================
- [..]
- Both DAC channels can be used to generate
- (#) Noise wave
- (#) Triangle wave
-
- *** DAC data format ***
- =======================
- [..]
- The DAC data format can be:
- (#) 8-bit right alignment using DAC_ALIGN_8B_R
- (#) 12-bit left alignment using DAC_ALIGN_12B_L
- (#) 12-bit right alignment using DAC_ALIGN_12B_R
-
- *** DAC data value to voltage correspondence ***
- ================================================
- [..]
- The analog output voltage on each DAC channel pin is determined
- by the following equation:
- DAC_OUTx = VREF+ * DOR / 4095
- with DOR is the Data Output Register
- VEF+ is the input voltage reference (refer to the device datasheet)
- e.g. To set DAC_OUT1 to 0.7V, use
- Assuming that VREF+ = 3.3V, DAC_OUT1 = (3.3 * 868) / 4095 = 0.7V
-
- *** DMA requests ***
- =====================
- [..]
- A DMA1 request can be generated when an external trigger (but not
- a software trigger) occurs if DMA1 requests are enabled using
- HAL_DAC_Start_DMA()
- [..]
- DMA1 requests are mapped as following:
- (#) DAC channel1 : mapped on DMA1 Stream5 channel7 which must be
- already configured
- (#) DAC channel2 : mapped on DMA1 Stream6 channel7 which must be
- already configured
-
- -@- For Dual mode and specific signal (Triangle and noise) generation please
- refer to Extension Features Driver description
-
-
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (+) DAC APB clock must be enabled to get write access to DAC
- registers using HAL_DAC_Init()
- (+) Configure DAC_OUTx (DAC_OUT1: PA4, DAC_OUT2: PA5) in analog mode.
- (+) Configure the DAC channel using HAL_DAC_ConfigChannel() function.
- (+) Enable the DAC channel using HAL_DAC_Start() or HAL_DAC_Start_DMA functions
-
- *** Polling mode IO operation ***
- =================================
- [..]
- (+) Start the DAC peripheral using HAL_DAC_Start()
- (+) To read the DAC last data output value, use the HAL_DAC_GetValue() function.
- (+) Stop the DAC peripheral using HAL_DAC_Stop()
-
- *** DMA mode IO operation ***
- ==============================
- [..]
- (+) Start the DAC peripheral using HAL_DAC_Start_DMA(), at this stage the user specify the length
- of data to be transferred at each end of conversion
- (+) At The end of data transfer HAL_DAC_ConvCpltCallbackCh1()or HAL_DAC_ConvCpltCallbackCh2()
- function is executed and user can add his own code by customization of function pointer
- HAL_DAC_ConvCpltCallbackCh1 or HAL_DAC_ConvCpltCallbackCh2
- (+) In case of transfer Error, HAL_DAC_ErrorCallbackCh1() function is executed and user can
- add his own code by customization of function pointer HAL_DAC_ErrorCallbackCh1
- (+) Stop the DAC peripheral using HAL_DAC_Stop_DMA()
-
- *** DAC HAL driver macros list ***
- =============================================
- [..]
- Below the list of most used macros in DAC HAL driver.
-
- (+) __HAL_DAC_ENABLE : Enable the DAC peripheral
- (+) __HAL_DAC_DISABLE : Disable the DAC peripheral
- (+) __HAL_DAC_CLEAR_FLAG: Clear the DAC's pending flags
- (+) __HAL_DAC_GET_FLAG: Get the selected DAC's flag status
-
- [..]
- (@) You can refer to the DAC HAL driver header file for more useful macros
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup DAC DAC
- * @brief DAC driver modules
- * @{
- */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
- defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
- defined(STM32F446xx)
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/** @addtogroup DAC_Private_Functions
- * @{
- */
-/* Private function prototypes -----------------------------------------------*/
-static void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma);
-static void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma);
-static void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma);
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup DAC_Exported_Functions DAC Exported Functions
- * @{
- */
-
-/** @defgroup DAC_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ==============================================================================
- ##### Initialization and de-initialization functions #####
- ==============================================================================
- [..] This section provides functions allowing to:
- (+) Initialize and configure the DAC.
- (+) De-initialize the DAC.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the DAC peripheral according to the specified parameters
- * in the DAC_InitStruct.
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac)
-{
- /* Check DAC handle */
- if(hdac == NULL)
- {
- return HAL_ERROR;
- }
- /* Check the parameters */
- assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance));
-
- if(hdac->State == HAL_DAC_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hdac->Lock = HAL_UNLOCKED;
- /* Init the low level hardware */
- HAL_DAC_MspInit(hdac);
- }
-
- /* Initialize the DAC state*/
- hdac->State = HAL_DAC_STATE_BUSY;
-
- /* Set DAC error code to none */
- hdac->ErrorCode = HAL_DAC_ERROR_NONE;
-
- /* Initialize the DAC state*/
- hdac->State = HAL_DAC_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Deinitializes the DAC peripheral registers to their default reset values.
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac)
-{
- /* Check DAC handle */
- if(hdac == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_DAC_ALL_INSTANCE(hdac->Instance));
-
- /* Change DAC state */
- hdac->State = HAL_DAC_STATE_BUSY;
-
- /* DeInit the low level hardware */
- HAL_DAC_MspDeInit(hdac);
-
- /* Set DAC error code to none */
- hdac->ErrorCode = HAL_DAC_ERROR_NONE;
-
- /* Change DAC state */
- hdac->State = HAL_DAC_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hdac);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the DAC MSP.
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @retval None
- */
-__weak void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_DAC_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes the DAC MSP.
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @retval None
- */
-__weak void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_DAC_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup DAC_Exported_Functions_Group2 IO operation functions
- * @brief IO operation functions
- *
-@verbatim
- ==============================================================================
- ##### IO operation functions #####
- ==============================================================================
- [..] This section provides functions allowing to:
- (+) Start conversion.
- (+) Stop conversion.
- (+) Start conversion and enable DMA transfer.
- (+) Stop conversion and disable DMA transfer.
- (+) Get result of conversion.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Enables DAC and starts conversion of channel.
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @param Channel: The selected DAC channel.
- * This parameter can be one of the following values:
- * @arg DAC_CHANNEL_1: DAC Channel1 selected
- * @arg DAC_CHANNEL_2: DAC Channel2 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel)
-{
- uint32_t tmp1 = 0, tmp2 = 0;
-
- /* Check the parameters */
- assert_param(IS_DAC_CHANNEL(Channel));
-
- /* Process locked */
- __HAL_LOCK(hdac);
-
- /* Change DAC state */
- hdac->State = HAL_DAC_STATE_BUSY;
-
- /* Enable the Peripheral */
- __HAL_DAC_ENABLE(hdac, Channel);
-
- if(Channel == DAC_CHANNEL_1)
- {
- tmp1 = hdac->Instance->CR & DAC_CR_TEN1;
- tmp2 = hdac->Instance->CR & DAC_CR_TSEL1;
- /* Check if software trigger enabled */
- if((tmp1 == DAC_CR_TEN1) && (tmp2 == DAC_CR_TSEL1))
- {
- /* Enable the selected DAC software conversion */
- hdac->Instance->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG1;
- }
- }
- else
- {
- tmp1 = hdac->Instance->CR & DAC_CR_TEN2;
- tmp2 = hdac->Instance->CR & DAC_CR_TSEL2;
- /* Check if software trigger enabled */
- if((tmp1 == DAC_CR_TEN2) && (tmp2 == DAC_CR_TSEL2))
- {
- /* Enable the selected DAC software conversion*/
- hdac->Instance->SWTRIGR |= (uint32_t)DAC_SWTRIGR_SWTRIG2;
- }
- }
-
- /* Change DAC state */
- hdac->State = HAL_DAC_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hdac);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Disables DAC and stop conversion of channel.
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @param Channel: The selected DAC channel.
- * This parameter can be one of the following values:
- * @arg DAC_CHANNEL_1: DAC Channel1 selected
- * @arg DAC_CHANNEL_2: DAC Channel2 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_DAC_CHANNEL(Channel));
-
- /* Disable the Peripheral */
- __HAL_DAC_DISABLE(hdac, Channel);
-
- /* Change DAC state */
- hdac->State = HAL_DAC_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Enables DAC and starts conversion of channel.
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @param Channel: The selected DAC channel.
- * This parameter can be one of the following values:
- * @arg DAC_CHANNEL_1: DAC Channel1 selected
- * @arg DAC_CHANNEL_2: DAC Channel2 selected
- * @param pData: The destination peripheral Buffer address.
- * @param Length: The length of data to be transferred from memory to DAC peripheral
- * @param Alignment: Specifies the data alignment for DAC channel.
- * This parameter can be one of the following values:
- * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected
- * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected
- * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment)
-{
- uint32_t tmpreg = 0;
-
- /* Check the parameters */
- assert_param(IS_DAC_CHANNEL(Channel));
- assert_param(IS_DAC_ALIGN(Alignment));
-
- /* Process locked */
- __HAL_LOCK(hdac);
-
- /* Change DAC state */
- hdac->State = HAL_DAC_STATE_BUSY;
-
- if(Channel == DAC_CHANNEL_1)
- {
- /* Set the DMA transfer complete callback for channel1 */
- hdac->DMA_Handle1->XferCpltCallback = DAC_DMAConvCpltCh1;
-
- /* Set the DMA half transfer complete callback for channel1 */
- hdac->DMA_Handle1->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh1;
-
- /* Set the DMA error callback for channel1 */
- hdac->DMA_Handle1->XferErrorCallback = DAC_DMAErrorCh1;
-
- /* Enable the selected DAC channel1 DMA request */
- hdac->Instance->CR |= DAC_CR_DMAEN1;
-
- /* Case of use of channel 1 */
- switch(Alignment)
- {
- case DAC_ALIGN_12B_R:
- /* Get DHR12R1 address */
- tmpreg = (uint32_t)&hdac->Instance->DHR12R1;
- break;
- case DAC_ALIGN_12B_L:
- /* Get DHR12L1 address */
- tmpreg = (uint32_t)&hdac->Instance->DHR12L1;
- break;
- case DAC_ALIGN_8B_R:
- /* Get DHR8R1 address */
- tmpreg = (uint32_t)&hdac->Instance->DHR8R1;
- break;
- default:
- break;
- }
- }
- else
- {
- /* Set the DMA transfer complete callback for channel2 */
- hdac->DMA_Handle2->XferCpltCallback = DAC_DMAConvCpltCh2;
-
- /* Set the DMA half transfer complete callback for channel2 */
- hdac->DMA_Handle2->XferHalfCpltCallback = DAC_DMAHalfConvCpltCh2;
-
- /* Set the DMA error callback for channel2 */
- hdac->DMA_Handle2->XferErrorCallback = DAC_DMAErrorCh2;
-
- /* Enable the selected DAC channel2 DMA request */
- hdac->Instance->CR |= DAC_CR_DMAEN2;
-
- /* Case of use of channel 2 */
- switch(Alignment)
- {
- case DAC_ALIGN_12B_R:
- /* Get DHR12R2 address */
- tmpreg = (uint32_t)&hdac->Instance->DHR12R2;
- break;
- case DAC_ALIGN_12B_L:
- /* Get DHR12L2 address */
- tmpreg = (uint32_t)&hdac->Instance->DHR12L2;
- break;
- case DAC_ALIGN_8B_R:
- /* Get DHR8R2 address */
- tmpreg = (uint32_t)&hdac->Instance->DHR8R2;
- break;
- default:
- break;
- }
- }
-
- /* Enable the DMA Stream */
- if(Channel == DAC_CHANNEL_1)
- {
- /* Enable the DAC DMA underrun interrupt */
- __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR1);
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(hdac->DMA_Handle1, (uint32_t)pData, tmpreg, Length);
- }
- else
- {
- /* Enable the DAC DMA underrun interrupt */
- __HAL_DAC_ENABLE_IT(hdac, DAC_IT_DMAUDR2);
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(hdac->DMA_Handle2, (uint32_t)pData, tmpreg, Length);
- }
-
- /* Enable the Peripheral */
- __HAL_DAC_ENABLE(hdac, Channel);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdac);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Disables DAC and stop conversion of channel.
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @param Channel: The selected DAC channel.
- * This parameter can be one of the following values:
- * @arg DAC_CHANNEL_1: DAC Channel1 selected
- * @arg DAC_CHANNEL_2: DAC Channel2 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Check the parameters */
- assert_param(IS_DAC_CHANNEL(Channel));
-
- /* Disable the selected DAC channel DMA request */
- hdac->Instance->CR &= ~(DAC_CR_DMAEN1 << Channel);
-
- /* Disable the Peripheral */
- __HAL_DAC_DISABLE(hdac, Channel);
-
- /* Disable the DMA Channel */
- /* Channel1 is used */
- if(Channel == DAC_CHANNEL_1)
- {
- status = HAL_DMA_Abort(hdac->DMA_Handle1);
- }
- else /* Channel2 is used for */
- {
- status = HAL_DMA_Abort(hdac->DMA_Handle2);
- }
-
- /* Check if DMA Channel effectively disabled */
- if(status != HAL_OK)
- {
- /* Update DAC state machine to error */
- hdac->State = HAL_DAC_STATE_ERROR;
- }
- else
- {
- /* Change DAC state */
- hdac->State = HAL_DAC_STATE_READY;
- }
-
- /* Return function status */
- return status;
-}
-
-/**
- * @brief Returns the last data output value of the selected DAC channel.
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @param Channel: The selected DAC channel.
- * This parameter can be one of the following values:
- * @arg DAC_CHANNEL_1: DAC Channel1 selected
- * @arg DAC_CHANNEL_2: DAC Channel2 selected
- * @retval The selected DAC channel data output value.
- */
-uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_DAC_CHANNEL(Channel));
-
- /* Returns the DAC channel data output register value */
- if(Channel == DAC_CHANNEL_1)
- {
- return hdac->Instance->DOR1;
- }
- else
- {
- return hdac->Instance->DOR2;
- }
-}
-
-/**
- * @brief Handles DAC interrupt request
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @retval None
- */
-void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac)
-{
- /* Check underrun channel 1 flag */
- if(__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR1))
- {
- /* Change DAC state to error state */
- hdac->State = HAL_DAC_STATE_ERROR;
-
- /* Set DAC error code to channel1 DMA underrun error */
- hdac->ErrorCode |= HAL_DAC_ERROR_DMAUNDERRUNCH1;
-
- /* Clear the underrun flag */
- __HAL_DAC_CLEAR_FLAG(hdac,DAC_FLAG_DMAUDR1);
-
- /* Disable the selected DAC channel1 DMA request */
- hdac->Instance->CR &= ~DAC_CR_DMAEN1;
-
- /* Error callback */
- HAL_DAC_DMAUnderrunCallbackCh1(hdac);
- }
- /* Check underrun channel 2 flag */
- if(__HAL_DAC_GET_FLAG(hdac, DAC_FLAG_DMAUDR2))
- {
- /* Change DAC state to error state */
- hdac->State = HAL_DAC_STATE_ERROR;
-
- /* Set DAC error code to channel2 DMA underrun error */
- hdac->ErrorCode |= HAL_DAC_ERROR_DMAUNDERRUNCH2;
-
- /* Clear the underrun flag */
- __HAL_DAC_CLEAR_FLAG(hdac,DAC_FLAG_DMAUDR2);
-
- /* Disable the selected DAC channel1 DMA request */
- hdac->Instance->CR &= ~DAC_CR_DMAEN2;
-
- /* Error callback */
- HAL_DACEx_DMAUnderrunCallbackCh2(hdac);
- }
-}
-
-/**
- * @brief Conversion complete callback in non blocking mode for Channel1
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @retval None
- */
-__weak void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_DAC_ConvCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Conversion half DMA transfer callback in non blocking mode for Channel1
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @retval None
- */
-__weak void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_DAC_ConvHalfCpltCallbackCh1 could be implemented in the user file
- */
-}
-
-/**
- * @brief Error DAC callback for Channel1.
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @retval None
- */
-__weak void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_DAC_ErrorCallbackCh1 could be implemented in the user file
- */
-}
-
-/**
- * @brief DMA underrun DAC callback for channel1.
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @retval None
- */
-__weak void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_DAC_DMAUnderrunCallbackCh1 could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup DAC_Exported_Functions_Group3 Peripheral Control functions
- * @brief Peripheral Control functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral Control functions #####
- ==============================================================================
- [..] This section provides functions allowing to:
- (+) Configure channels.
- (+) Set the specified data holding register value for DAC channel.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Configures the selected DAC channel.
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @param sConfig: DAC configuration structure.
- * @param Channel: The selected DAC channel.
- * This parameter can be one of the following values:
- * @arg DAC_CHANNEL_1: DAC Channel1 selected
- * @arg DAC_CHANNEL_2: DAC Channel2 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel)
-{
- uint32_t tmpreg1 = 0, tmpreg2 = 0;
-
- /* Check the DAC parameters */
- assert_param(IS_DAC_TRIGGER(sConfig->DAC_Trigger));
- assert_param(IS_DAC_OUTPUT_BUFFER_STATE(sConfig->DAC_OutputBuffer));
- assert_param(IS_DAC_CHANNEL(Channel));
-
- /* Process locked */
- __HAL_LOCK(hdac);
-
- /* Change DAC state */
- hdac->State = HAL_DAC_STATE_BUSY;
-
- /* Get the DAC CR value */
- tmpreg1 = hdac->Instance->CR;
- /* Clear BOFFx, TENx, TSELx, WAVEx and MAMPx bits */
- tmpreg1 &= ~(((uint32_t)(DAC_CR_MAMP1 | DAC_CR_WAVE1 | DAC_CR_TSEL1 | DAC_CR_TEN1 | DAC_CR_BOFF1)) << Channel);
- /* Configure for the selected DAC channel: buffer output, trigger */
- /* Set TSELx and TENx bits according to DAC_Trigger value */
- /* Set BOFFx bit according to DAC_OutputBuffer value */
- tmpreg2 = (sConfig->DAC_Trigger | sConfig->DAC_OutputBuffer);
- /* Calculate CR register value depending on DAC_Channel */
- tmpreg1 |= tmpreg2 << Channel;
- /* Write to DAC CR */
- hdac->Instance->CR = tmpreg1;
- /* Disable wave generation */
- hdac->Instance->CR &= ~(DAC_CR_WAVE1 << Channel);
-
- /* Change DAC state */
- hdac->State = HAL_DAC_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hdac);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Set the specified data holding register value for DAC channel.
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @param Channel: The selected DAC channel.
- * This parameter can be one of the following values:
- * @arg DAC_CHANNEL_1: DAC Channel1 selected
- * @arg DAC_CHANNEL_2: DAC Channel2 selected
- * @param Alignment: Specifies the data alignment.
- * This parameter can be one of the following values:
- * @arg DAC_ALIGN_8B_R: 8bit right data alignment selected
- * @arg DAC_ALIGN_12B_L: 12bit left data alignment selected
- * @arg DAC_ALIGN_12B_R: 12bit right data alignment selected
- * @param Data: Data to be loaded in the selected data holding register.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data)
-{
- __IO uint32_t tmp = 0;
-
- /* Check the parameters */
- assert_param(IS_DAC_CHANNEL(Channel));
- assert_param(IS_DAC_ALIGN(Alignment));
- assert_param(IS_DAC_DATA(Data));
-
- tmp = (uint32_t)hdac->Instance;
- if(Channel == DAC_CHANNEL_1)
- {
- tmp += DAC_DHR12R1_ALIGNMENT(Alignment);
- }
- else
- {
- tmp += DAC_DHR12R2_ALIGNMENT(Alignment);
- }
-
- /* Set the DAC channel1 selected data holding register */
- *(__IO uint32_t *) tmp = Data;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup DAC_Exported_Functions_Group4 Peripheral State and Errors functions
- * @brief Peripheral State and Errors functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral State and Errors functions #####
- ==============================================================================
- [..]
- This subsection provides functions allowing to
- (+) Check the DAC state.
- (+) Check the DAC Errors.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief return the DAC state
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @retval HAL state
- */
-HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac)
-{
- /* Return DAC state */
- return hdac->State;
-}
-
-
-/**
- * @brief Return the DAC error code
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @retval DAC Error Code
- */
-uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac)
-{
- return hdac->ErrorCode;
-}
-
-/**
- * @}
- */
-
-/**
- * @brief DMA conversion complete callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void DAC_DMAConvCpltCh1(DMA_HandleTypeDef *hdma)
-{
- DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- HAL_DAC_ConvCpltCallbackCh1(hdac);
-
- hdac->State= HAL_DAC_STATE_READY;
-}
-
-/**
- * @brief DMA half transfer complete callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void DAC_DMAHalfConvCpltCh1(DMA_HandleTypeDef *hdma)
-{
- DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- /* Conversion complete callback */
- HAL_DAC_ConvHalfCpltCallbackCh1(hdac);
-}
-
-/**
- * @brief DMA error callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void DAC_DMAErrorCh1(DMA_HandleTypeDef *hdma)
-{
- DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- /* Set DAC error code to DMA error */
- hdac->ErrorCode |= HAL_DAC_ERROR_DMA;
-
- HAL_DAC_ErrorCallbackCh1(hdac);
-
- hdac->State= HAL_DAC_STATE_READY;
-}
-
-/**
- * @}
- */
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
- STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
- STM32F446xx
- */
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac_ex.c
deleted file mode 100644
index 7797a6d..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dac_ex.c
+++ /dev/null
@@ -1,382 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_dac_ex.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief DAC HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of DAC extension peripheral:
- * + Extended features functions
- *
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (+) When Dual mode is enabled (i.e DAC Channel1 and Channel2 are used simultaneously) :
- Use HAL_DACEx_DualGetValue() to get digital data to be converted and use
- HAL_DACEx_DualSetValue() to set digital value to converted simultaneously in Channel 1 and Channel 2.
- (+) Use HAL_DACEx_TriangleWaveGenerate() to generate Triangle signal.
- (+) Use HAL_DACEx_NoiseWaveGenerate() to generate Noise signal.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup DACEx DACEx
- * @brief DAC driver modules
- * @{
- */
-
-#ifdef HAL_DAC_MODULE_ENABLED
-
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
- defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
- defined(STM32F446xx)
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup DACEx_Exported_Functions DAC Exported Functions
- * @{
- */
-
-/** @defgroup DACEx_Exported_Functions_Group1 Extended features functions
- * @brief Extended features functions
- *
-@verbatim
- ==============================================================================
- ##### Extended features functions #####
- ==============================================================================
- [..] This section provides functions allowing to:
- (+) Start conversion.
- (+) Stop conversion.
- (+) Start conversion and enable DMA transfer.
- (+) Stop conversion and disable DMA transfer.
- (+) Get result of conversion.
- (+) Get result of dual mode conversion.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Returns the last data output value of the selected DAC channel.
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @retval The selected DAC channel data output value.
- */
-uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac)
-{
- uint32_t tmp = 0;
-
- tmp |= hdac->Instance->DOR1;
-
- tmp |= hdac->Instance->DOR2 << 16;
-
- /* Returns the DAC channel data output register value */
- return tmp;
-}
-
-/**
- * @brief Enables or disables the selected DAC channel wave generation.
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @param Channel: The selected DAC channel.
- * This parameter can be one of the following values:
- * DAC_CHANNEL_1 / DAC_CHANNEL_2
- * @param Amplitude: Select max triangle amplitude.
- * This parameter can be one of the following values:
- * @arg DAC_TRIANGLEAMPLITUDE_1: Select max triangle amplitude of 1
- * @arg DAC_TRIANGLEAMPLITUDE_3: Select max triangle amplitude of 3
- * @arg DAC_TRIANGLEAMPLITUDE_7: Select max triangle amplitude of 7
- * @arg DAC_TRIANGLEAMPLITUDE_15: Select max triangle amplitude of 15
- * @arg DAC_TRIANGLEAMPLITUDE_31: Select max triangle amplitude of 31
- * @arg DAC_TRIANGLEAMPLITUDE_63: Select max triangle amplitude of 63
- * @arg DAC_TRIANGLEAMPLITUDE_127: Select max triangle amplitude of 127
- * @arg DAC_TRIANGLEAMPLITUDE_255: Select max triangle amplitude of 255
- * @arg DAC_TRIANGLEAMPLITUDE_511: Select max triangle amplitude of 511
- * @arg DAC_TRIANGLEAMPLITUDE_1023: Select max triangle amplitude of 1023
- * @arg DAC_TRIANGLEAMPLITUDE_2047: Select max triangle amplitude of 2047
- * @arg DAC_TRIANGLEAMPLITUDE_4095: Select max triangle amplitude of 4095
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude)
-{
- /* Check the parameters */
- assert_param(IS_DAC_CHANNEL(Channel));
- assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude));
-
- /* Process locked */
- __HAL_LOCK(hdac);
-
- /* Change DAC state */
- hdac->State = HAL_DAC_STATE_BUSY;
-
- /* Enable the selected wave generation for the selected DAC channel */
- MODIFY_REG(hdac->Instance->CR, (DAC_CR_WAVE1 | DAC_CR_MAMP1) << Channel, (DAC_CR_WAVE1_1 | Amplitude) << Channel);
-
- /* Change DAC state */
- hdac->State = HAL_DAC_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hdac);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Enables or disables the selected DAC channel wave generation.
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @param Channel: The selected DAC channel.
- * This parameter can be one of the following values:
- * DAC_CHANNEL_1 / DAC_CHANNEL_2
- * @param Amplitude: Unmask DAC channel LFSR for noise wave generation.
- * This parameter can be one of the following values:
- * @arg DAC_LFSRUNMASK_BIT0: Unmask DAC channel LFSR bit0 for noise wave generation
- * @arg DAC_LFSRUNMASK_BITS1_0: Unmask DAC channel LFSR bit[1:0] for noise wave generation
- * @arg DAC_LFSRUNMASK_BITS2_0: Unmask DAC channel LFSR bit[2:0] for noise wave generation
- * @arg DAC_LFSRUNMASK_BITS3_0: Unmask DAC channel LFSR bit[3:0] for noise wave generation
- * @arg DAC_LFSRUNMASK_BITS4_0: Unmask DAC channel LFSR bit[4:0] for noise wave generation
- * @arg DAC_LFSRUNMASK_BITS5_0: Unmask DAC channel LFSR bit[5:0] for noise wave generation
- * @arg DAC_LFSRUNMASK_BITS6_0: Unmask DAC channel LFSR bit[6:0] for noise wave generation
- * @arg DAC_LFSRUNMASK_BITS7_0: Unmask DAC channel LFSR bit[7:0] for noise wave generation
- * @arg DAC_LFSRUNMASK_BITS8_0: Unmask DAC channel LFSR bit[8:0] for noise wave generation
- * @arg DAC_LFSRUNMASK_BITS9_0: Unmask DAC channel LFSR bit[9:0] for noise wave generation
- * @arg DAC_LFSRUNMASK_BITS10_0: Unmask DAC channel LFSR bit[10:0] for noise wave generation
- * @arg DAC_LFSRUNMASK_BITS11_0: Unmask DAC channel LFSR bit[11:0] for noise wave generation
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude)
-{
- /* Check the parameters */
- assert_param(IS_DAC_CHANNEL(Channel));
- assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude));
-
- /* Process locked */
- __HAL_LOCK(hdac);
-
- /* Change DAC state */
- hdac->State = HAL_DAC_STATE_BUSY;
-
- /* Enable the selected wave generation for the selected DAC channel */
- MODIFY_REG(hdac->Instance->CR, (DAC_CR_WAVE1 | DAC_CR_MAMP1) << Channel, (DAC_CR_WAVE1_0 | Amplitude) << Channel);
-
- /* Change DAC state */
- hdac->State = HAL_DAC_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hdac);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Set the specified data holding register value for dual DAC channel.
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @param Alignment: Specifies the data alignment for dual channel DAC.
- * This parameter can be one of the following values:
- * DAC_ALIGN_8B_R: 8bit right data alignment selected
- * DAC_ALIGN_12B_L: 12bit left data alignment selected
- * DAC_ALIGN_12B_R: 12bit right data alignment selected
- * @param Data1: Data for DAC Channel2 to be loaded in the selected data holding register.
- * @param Data2: Data for DAC Channel1 to be loaded in the selected data holding register.
- * @note In dual mode, a unique register access is required to write in both
- * DAC channels at the same time.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2)
-{
- uint32_t data = 0, tmp = 0;
-
- /* Check the parameters */
- assert_param(IS_DAC_ALIGN(Alignment));
- assert_param(IS_DAC_DATA(Data1));
- assert_param(IS_DAC_DATA(Data2));
-
- /* Calculate and set dual DAC data holding register value */
- if (Alignment == DAC_ALIGN_8B_R)
- {
- data = ((uint32_t)Data2 << 8) | Data1;
- }
- else
- {
- data = ((uint32_t)Data2 << 16) | Data1;
- }
-
- tmp = (uint32_t)hdac->Instance;
- tmp += DAC_DHR12RD_ALIGNMENT(Alignment);
-
- /* Set the dual DAC selected data holding register */
- *(__IO uint32_t *)tmp = data;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/**
- * @brief Conversion complete callback in non blocking mode for Channel2
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @retval None
- */
-__weak void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_DAC_ConvCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Conversion half DMA transfer callback in non blocking mode for Channel2
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @retval None
- */
-__weak void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_DAC_ConvHalfCpltCallbackCh2 could be implemented in the user file
- */
-}
-
-/**
- * @brief Error DAC callback for Channel2.
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @retval None
- */
-__weak void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_DAC_ErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief DMA underrun DAC callback for channel2.
- * @param hdac: pointer to a DAC_HandleTypeDef structure that contains
- * the configuration information for the specified DAC.
- * @retval None
- */
-__weak void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_DAC_DMAUnderrunCallbackCh2 could be implemented in the user file
- */
-}
-
-/**
- * @brief DMA conversion complete callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma)
-{
- DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- HAL_DACEx_ConvCpltCallbackCh2(hdac);
-
- hdac->State= HAL_DAC_STATE_READY;
-}
-
-/**
- * @brief DMA half transfer complete callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma)
-{
- DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- /* Conversion complete callback */
- HAL_DACEx_ConvHalfCpltCallbackCh2(hdac);
-}
-
-/**
- * @brief DMA error callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma)
-{
- DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- /* Set DAC error code to DMA error */
- hdac->ErrorCode |= HAL_DAC_ERROR_DMA;
-
- HAL_DACEx_ErrorCallbackCh2(hdac);
-
- hdac->State= HAL_DAC_STATE_READY;
-}
-
-/**
- * @}
- */
-
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
- STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
- STM32F446xx
- */
-
-#endif /* HAL_DAC_MODULE_ENABLED */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi.c
deleted file mode 100644
index 7de37e7..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi.c
+++ /dev/null
@@ -1,830 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_dcmi.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief DCMI HAL module driver
- * This file provides firmware functions to manage the following
- * functionalities of the Digital Camera Interface (DCMI) peripheral:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral Control functions
- * + Peripheral State and Error functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- The sequence below describes how to use this driver to capture image
- from a camera module connected to the DCMI Interface.
- This sequence does not take into account the configuration of the
- camera module, which should be made before to configure and enable
- the DCMI to capture images.
-
- (#) Program the required configuration through following parameters:
- horizontal and vertical polarity, pixel clock polarity, Capture Rate,
- Synchronization Mode, code of the frame delimiter and data width
- using HAL_DCMI_Init() function.
-
- (#) Configure the DMA2_Stream1 channel1 to transfer Data from DCMI DR
- register to the destination memory buffer.
-
- (#) Program the required configuration through following parameters:
- DCMI mode, destination memory Buffer address and the data length
- and enable capture using HAL_DCMI_Start_DMA() function.
-
- (#) Optionally, configure and Enable the CROP feature to select a rectangular
- window from the received image using HAL_DCMI_ConfigCrop()
- and HAL_DCMI_EnableCROP() functions
-
- (#) The capture can be stopped using HAL_DCMI_Stop() function.
-
- (#) To control DCMI state you can use the function HAL_DCMI_GetState().
-
- *** DCMI HAL driver macros list ***
- =============================================
- [..]
- Below the list of most used macros in DCMI HAL driver.
-
- (+) __HAL_DCMI_ENABLE: Enable the DCMI peripheral.
- (+) __HAL_DCMI_DISABLE: Disable the DCMI peripheral.
- (+) __HAL_DCMI_GET_FLAG: Get the DCMI pending flags.
- (+) __HAL_DCMI_CLEAR_FLAG: Clear the DCMI pending flags.
- (+) __HAL_DCMI_ENABLE_IT: Enable the specified DCMI interrupts.
- (+) __HAL_DCMI_DISABLE_IT: Disable the specified DCMI interrupts.
- (+) __HAL_DCMI_GET_IT_SOURCE: Check whether the specified DCMI interrupt has occurred or not.
-
- [..]
- (@) You can refer to the DCMI HAL driver header file for more useful macros
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-/** @defgroup DCMI DCMI
- * @brief DCMI HAL module driver
- * @{
- */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-
-#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\
- defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-#define HAL_TIMEOUT_DCMI_STOP ((uint32_t)1000) /* 1s */
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-static void DCMI_DMAConvCplt(DMA_HandleTypeDef *hdma);
-static void DCMI_DMAError(DMA_HandleTypeDef *hdma);
-
-/* Exported functions --------------------------------------------------------*/
-
-/** @defgroup DCMI_Exported_Functions DCMI Exported Functions
- * @{
- */
-
-/** @defgroup DCMI_Exported_Functions_Group1 Initialization and Configuration functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and Configuration functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Initialize and configure the DCMI
- (+) De-initialize the DCMI
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the DCMI according to the specified
- * parameters in the DCMI_InitTypeDef and create the associated handle.
- * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
- * the configuration information for DCMI.
- * @retval HAL status
- */
-__weak HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi)
-{
- /* Check the DCMI peripheral state */
- if(hdcmi == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check function parameters */
- assert_param(IS_DCMI_ALL_INSTANCE(hdcmi->Instance));
- assert_param(IS_DCMI_PCKPOLARITY(hdcmi->Init.PCKPolarity));
- assert_param(IS_DCMI_VSPOLARITY(hdcmi->Init.VSPolarity));
- assert_param(IS_DCMI_HSPOLARITY(hdcmi->Init.HSPolarity));
- assert_param(IS_DCMI_SYNCHRO(hdcmi->Init.SynchroMode));
- assert_param(IS_DCMI_CAPTURE_RATE(hdcmi->Init.CaptureRate));
- assert_param(IS_DCMI_EXTENDED_DATA(hdcmi->Init.ExtendedDataMode));
- assert_param(IS_DCMI_MODE_JPEG(hdcmi->Init.JPEGMode));
-
- if(hdcmi->State == HAL_DCMI_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hdcmi->Lock = HAL_UNLOCKED;
- /* Init the low level hardware */
- HAL_DCMI_MspInit(hdcmi);
- }
-
- /* Change the DCMI state */
- hdcmi->State = HAL_DCMI_STATE_BUSY;
- /* Configures the HS, VS, DE and PC polarity */
- hdcmi->Instance->CR &= ~(DCMI_CR_PCKPOL | DCMI_CR_HSPOL | DCMI_CR_VSPOL | DCMI_CR_EDM_0 |
- DCMI_CR_EDM_1 | DCMI_CR_FCRC_0 | DCMI_CR_FCRC_1 | DCMI_CR_JPEG |
- DCMI_CR_ESS);
- hdcmi->Instance->CR |= (uint32_t)(hdcmi->Init.SynchroMode | hdcmi->Init.CaptureRate | \
- hdcmi->Init.VSPolarity | hdcmi->Init.HSPolarity | \
- hdcmi->Init.PCKPolarity | hdcmi->Init.ExtendedDataMode | \
- hdcmi->Init.JPEGMode);
-
- if(hdcmi->Init.SynchroMode == DCMI_SYNCHRO_EMBEDDED)
- {
- DCMI->ESCR = (((uint32_t)hdcmi->Init.SyncroCode.FrameStartCode) |
- ((uint32_t)hdcmi->Init.SyncroCode.LineStartCode << 8)|
- ((uint32_t)hdcmi->Init.SyncroCode.LineEndCode << 16) |
- ((uint32_t)hdcmi->Init.SyncroCode.FrameEndCode << 24));
-
- }
-
- /* Enable the Line interrupt */
- __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_LINE);
-
- /* Enable the VSYNC interrupt */
- __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_VSYNC);
-
- /* Enable the Frame capture complete interrupt */
- __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_FRAME);
-
- /* Enable the Synchronization error interrupt */
- __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_ERR);
-
- /* Enable the Overflow interrupt */
- __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_OVF);
-
- /* Enable DCMI by setting DCMIEN bit */
- __HAL_DCMI_ENABLE(hdcmi);
-
- /* Update error code */
- hdcmi->ErrorCode = HAL_DCMI_ERROR_NONE;
-
- /* Initialize the DCMI state*/
- hdcmi->State = HAL_DCMI_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Deinitializes the DCMI peripheral registers to their default reset
- * values.
- * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
- * the configuration information for DCMI.
- * @retval HAL status
- */
-
-HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi)
-{
- /* DeInit the low level hardware */
- HAL_DCMI_MspDeInit(hdcmi);
-
- /* Update error code */
- hdcmi->ErrorCode = HAL_DCMI_ERROR_NONE;
-
- /* Initialize the DCMI state*/
- hdcmi->State = HAL_DCMI_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hdcmi);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the DCMI MSP.
- * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
- * the configuration information for DCMI.
- * @retval None
- */
-__weak void HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_DCMI_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes the DCMI MSP.
- * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
- * the configuration information for DCMI.
- * @retval None
- */
-__weak void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_DCMI_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-/** @defgroup DCMI_Exported_Functions_Group2 IO operation functions
- * @brief IO operation functions
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Configure destination address and data length and
- Enables DCMI DMA request and enables DCMI capture
- (+) Stop the DCMI capture.
- (+) Handles DCMI interrupt request.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Enables DCMI DMA request and enables DCMI capture
- * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
- * the configuration information for DCMI.
- * @param DCMI_Mode: DCMI capture mode snapshot or continuous grab.
- * @param pData: The destination memory Buffer address (LCD Frame buffer).
- * @param Length: The length of capture to be transferred.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length)
-{
- /* Initialize the second memory address */
- uint32_t SecondMemAddress = 0;
-
- /* Check function parameters */
- assert_param(IS_DCMI_CAPTURE_MODE(DCMI_Mode));
-
- /* Process Locked */
- __HAL_LOCK(hdcmi);
-
- /* Lock the DCMI peripheral state */
- hdcmi->State = HAL_DCMI_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_DCMI_CAPTURE_MODE(DCMI_Mode));
-
- /* Configure the DCMI Mode */
- hdcmi->Instance->CR &= ~(DCMI_CR_CM);
- hdcmi->Instance->CR |= (uint32_t)(DCMI_Mode);
-
- /* Set the DMA memory0 conversion complete callback */
- hdcmi->DMA_Handle->XferCpltCallback = DCMI_DMAConvCplt;
-
- /* Set the DMA error callback */
- hdcmi->DMA_Handle->XferErrorCallback = DCMI_DMAError;
-
- if(Length <= 0xFFFF)
- {
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(hdcmi->DMA_Handle, (uint32_t)&hdcmi->Instance->DR, (uint32_t)pData, Length);
- }
- else /* DCMI_DOUBLE_BUFFER Mode */
- {
- /* Set the DMA memory1 conversion complete callback */
- hdcmi->DMA_Handle->XferM1CpltCallback = DCMI_DMAConvCplt;
-
- /* Initialize transfer parameters */
- hdcmi->XferCount = 1;
- hdcmi->XferSize = Length;
- hdcmi->pBuffPtr = pData;
-
- /* Get the number of buffer */
- while(hdcmi->XferSize > 0xFFFF)
- {
- hdcmi->XferSize = (hdcmi->XferSize/2);
- hdcmi->XferCount = hdcmi->XferCount*2;
- }
-
- /* Update DCMI counter and transfer number*/
- hdcmi->XferCount = (hdcmi->XferCount - 2);
- hdcmi->XferTransferNumber = hdcmi->XferCount;
-
- /* Update second memory address */
- SecondMemAddress = (uint32_t)(pData + (4*hdcmi->XferSize));
-
- /* Start DMA multi buffer transfer */
- HAL_DMAEx_MultiBufferStart_IT(hdcmi->DMA_Handle, (uint32_t)&hdcmi->Instance->DR, (uint32_t)pData, SecondMemAddress, hdcmi->XferSize);
- }
-
- /* Enable Capture */
- DCMI->CR |= DCMI_CR_CAPTURE;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Disable DCMI DMA request and Disable DCMI capture
- * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
- * the configuration information for DCMI.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi)
-{
- uint32_t tickstart = 0;
-
- /* Lock the DCMI peripheral state */
- hdcmi->State = HAL_DCMI_STATE_BUSY;
-
- __HAL_DCMI_DISABLE(hdcmi);
-
- /* Disable Capture */
- DCMI->CR &= ~(DCMI_CR_CAPTURE);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Check if the DCMI capture effectively disabled */
- while((hdcmi->Instance->CR & DCMI_CR_CAPTURE) != 0)
- {
- if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DCMI_STOP)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hdcmi);
-
- /* Update error code */
- hdcmi->ErrorCode |= HAL_DCMI_ERROR_TIMEOUT;
-
- /* Change DCMI state */
- hdcmi->State = HAL_DCMI_STATE_TIMEOUT;
-
- return HAL_TIMEOUT;
- }
- }
-
- /* Disable the DMA */
- HAL_DMA_Abort(hdcmi->DMA_Handle);
-
- /* Update error code */
- hdcmi->ErrorCode |= HAL_DCMI_ERROR_NONE;
-
- /* Change DCMI state */
- hdcmi->State = HAL_DCMI_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdcmi);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Handles DCMI interrupt request.
- * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
- * the configuration information for the DCMI.
- * @retval None
- */
-void HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi)
-{
- /* Synchronization error interrupt management *******************************/
- if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_ERRRI) != RESET)
- {
- if(__HAL_DCMI_GET_IT_SOURCE(hdcmi, DCMI_IT_ERR) != RESET)
- {
- /* Disable the Synchronization error interrupt */
- __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_ERR);
-
- /* Clear the Synchronization error flag */
- __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_ERRRI);
-
- /* Update error code */
- hdcmi->ErrorCode |= HAL_DCMI_ERROR_SYNC;
-
- /* Change DCMI state */
- hdcmi->State = HAL_DCMI_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdcmi);
-
- /* Abort the DMA Transfer */
- HAL_DMA_Abort(hdcmi->DMA_Handle);
-
- /* Synchronization error Callback */
- HAL_DCMI_ErrorCallback(hdcmi);
- }
- }
- /* Overflow interrupt management ********************************************/
- if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_OVFRI) != RESET)
- {
- if(__HAL_DCMI_GET_IT_SOURCE(hdcmi, DCMI_IT_OVF) != RESET)
- {
- /* Disable the Overflow interrupt */
- __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_OVF);
-
- /* Clear the Overflow flag */
- __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_OVFRI);
-
- /* Update error code */
- hdcmi->ErrorCode |= HAL_DCMI_ERROR_OVF;
-
- /* Change DCMI state */
- hdcmi->State = HAL_DCMI_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdcmi);
-
- /* Abort the DMA Transfer */
- HAL_DMA_Abort(hdcmi->DMA_Handle);
-
- /* Overflow Callback */
- HAL_DCMI_ErrorCallback(hdcmi);
- }
- }
- /* Line Interrupt management ************************************************/
- if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_LINERI) != RESET)
- {
- if(__HAL_DCMI_GET_IT_SOURCE(hdcmi, DCMI_IT_LINE) != RESET)
- {
- /* Clear the Line interrupt flag */
- __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_LINERI);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdcmi);
-
- /* Line interrupt Callback */
- HAL_DCMI_LineEventCallback(hdcmi);
- }
- }
- /* VSYNC interrupt management ***********************************************/
- if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_VSYNCRI) != RESET)
- {
- if(__HAL_DCMI_GET_IT_SOURCE(hdcmi, DCMI_IT_VSYNC) != RESET)
- {
- /* Disable the VSYNC interrupt */
- __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_VSYNC);
-
- /* Clear the VSYNC flag */
- __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_VSYNCRI);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdcmi);
-
- /* VSYNC Callback */
- HAL_DCMI_VsyncEventCallback(hdcmi);
- }
- }
- /* End of Frame interrupt management ****************************************/
- if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_FRAMERI) != RESET)
- {
- if(__HAL_DCMI_GET_IT_SOURCE(hdcmi, DCMI_IT_FRAME) != RESET)
- {
- /* Disable the End of Frame interrupt */
- __HAL_DCMI_DISABLE_IT(hdcmi, DCMI_IT_FRAME);
-
- /* Clear the End of Frame flag */
- __HAL_DCMI_CLEAR_FLAG(hdcmi, DCMI_FLAG_FRAMERI);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdcmi);
-
- /* End of Frame Callback */
- HAL_DCMI_FrameEventCallback(hdcmi);
- }
- }
-}
-
-/**
- * @brief Error DCMI callback.
- * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
- * the configuration information for DCMI.
- * @retval None
- */
-__weak void HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_DCMI_ErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Line Event callback.
- * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
- * the configuration information for DCMI.
- * @retval None
- */
-__weak void HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_DCMI_LineEventCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief VSYNC Event callback.
- * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
- * the configuration information for DCMI.
- * @retval None
- */
-__weak void HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_DCMI_VsyncEventCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Frame Event callback.
- * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
- * the configuration information for DCMI.
- * @retval None
- */
-__weak void HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_DCMI_FrameEventCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup DCMI_Exported_Functions_Group3 Peripheral Control functions
- * @brief Peripheral Control functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Control functions #####
- ===============================================================================
-[..] This section provides functions allowing to:
- (+) Configure the CROP feature.
- (+) Enable/Disable the CROP feature.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Configure the DCMI CROP coordinate.
- * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
- * the configuration information for DCMI.
- * @param YSize: DCMI Line number
- * @param XSize: DCMI Pixel per line
- * @param X0: DCMI window X offset
- * @param Y0: DCMI window Y offset
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DCMI_ConfigCROP(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize)
-{
- /* Process Locked */
- __HAL_LOCK(hdcmi);
-
- /* Lock the DCMI peripheral state */
- hdcmi->State = HAL_DCMI_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_DCMI_WINDOW_COORDINATE(X0));
- assert_param(IS_DCMI_WINDOW_COORDINATE(YSize));
- assert_param(IS_DCMI_WINDOW_COORDINATE(XSize));
- assert_param(IS_DCMI_WINDOW_HEIGHT(Y0));
-
- /* Configure CROP */
- DCMI->CWSIZER = (XSize | (YSize << 16));
- DCMI->CWSTRTR = (X0 | (Y0 << 16));
-
- /* Initialize the DCMI state*/
- hdcmi->State = HAL_DCMI_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdcmi);
-
- return HAL_OK;
-}
-
-/**
- * @brief Disable the Crop feature.
- * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
- * the configuration information for DCMI.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DCMI_DisableCROP(DCMI_HandleTypeDef *hdcmi)
-{
- /* Process Locked */
- __HAL_LOCK(hdcmi);
-
- /* Lock the DCMI peripheral state */
- hdcmi->State = HAL_DCMI_STATE_BUSY;
-
- /* Disable DCMI Crop feature */
- DCMI->CR &= ~(uint32_t)DCMI_CR_CROP;
-
- /* Change the DCMI state*/
- hdcmi->State = HAL_DCMI_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdcmi);
-
- return HAL_OK;
-}
-
-/**
- * @brief Enable the Crop feature.
- * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
- * the configuration information for DCMI.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DCMI_EnableCROP(DCMI_HandleTypeDef *hdcmi)
-{
- /* Process Locked */
- __HAL_LOCK(hdcmi);
-
- /* Lock the DCMI peripheral state */
- hdcmi->State = HAL_DCMI_STATE_BUSY;
-
- /* Enable DCMI Crop feature */
- DCMI->CR |= (uint32_t)DCMI_CR_CROP;
-
- /* Change the DCMI state*/
- hdcmi->State = HAL_DCMI_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdcmi);
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup DCMI_Exported_Functions_Group4 Peripheral State functions
- * @brief Peripheral State functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral State and Errors functions #####
- ===============================================================================
- [..]
- This subsection provides functions allowing to
- (+) Check the DCMI state.
- (+) Get the specific DCMI error flag.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Return the DCMI state
- * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
- * the configuration information for DCMI.
- * @retval HAL state
- */
-HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi)
-{
- return hdcmi->State;
-}
-
-/**
-* @brief Return the DCMI error code
-* @param hdcmi : pointer to a DCMI_HandleTypeDef structure that contains
- * the configuration information for DCMI.
-* @retval DCMI Error Code
-*/
-uint32_t HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi)
-{
- return hdcmi->ErrorCode;
-}
-
-/**
- * @}
- */
-/* Private functions ---------------------------------------------------------*/
-/** @defgroup DCMI_Private_Functions DCMI Private Functions
- * @{
- */
-
- /**
- * @brief DMA conversion complete callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void DCMI_DMAConvCplt(DMA_HandleTypeDef *hdma)
-{
- uint32_t tmp = 0;
-
- DCMI_HandleTypeDef* hdcmi = ( DCMI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- hdcmi->State= HAL_DCMI_STATE_READY;
-
- if(hdcmi->XferCount != 0)
- {
- /* Update memory 0 address location */
- tmp = ((hdcmi->DMA_Handle->Instance->CR) & DMA_SxCR_CT);
- if(((hdcmi->XferCount % 2) == 0) && (tmp != 0))
- {
- tmp = hdcmi->DMA_Handle->Instance->M0AR;
- HAL_DMAEx_ChangeMemory(hdcmi->DMA_Handle, (tmp + (8*hdcmi->XferSize)), MEMORY0);
- hdcmi->XferCount--;
- }
- /* Update memory 1 address location */
- else if((hdcmi->DMA_Handle->Instance->CR & DMA_SxCR_CT) == 0)
- {
- tmp = hdcmi->DMA_Handle->Instance->M1AR;
- HAL_DMAEx_ChangeMemory(hdcmi->DMA_Handle, (tmp + (8*hdcmi->XferSize)), MEMORY1);
- hdcmi->XferCount--;
- }
- }
- /* Update memory 0 address location */
- else if((hdcmi->DMA_Handle->Instance->CR & DMA_SxCR_CT) != 0)
- {
- hdcmi->DMA_Handle->Instance->M0AR = hdcmi->pBuffPtr;
- }
- /* Update memory 1 address location */
- else if((hdcmi->DMA_Handle->Instance->CR & DMA_SxCR_CT) == 0)
- {
- tmp = hdcmi->pBuffPtr;
- hdcmi->DMA_Handle->Instance->M1AR = (tmp + (4*hdcmi->XferSize));
- hdcmi->XferCount = hdcmi->XferTransferNumber;
- }
-
- if(__HAL_DCMI_GET_FLAG(hdcmi, DCMI_FLAG_FRAMERI) != RESET)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hdcmi);
-
- /* FRAME Callback */
- HAL_DCMI_FrameEventCallback(hdcmi);
- }
-}
-
-/**
- * @brief DMA error callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void DCMI_DMAError(DMA_HandleTypeDef *hdma)
-{
- DCMI_HandleTypeDef* hdcmi = ( DCMI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- hdcmi->State= HAL_DCMI_STATE_READY;
- HAL_DCMI_ErrorCallback(hdcmi);
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-#endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\
- STM32F429xx || STM32F439xx || STM32F446xx */
-#endif /* HAL_DCMI_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi_ex.c
deleted file mode 100644
index 2f9f23d..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dcmi_ex.c
+++ /dev/null
@@ -1,212 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_dcmi_ex.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief DCMI Extension HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of DCMI extension peripheral:
- * + Extension features functions
- *
- @verbatim
- ==============================================================================
- ##### DCMI peripheral extension features #####
- ==============================================================================
-
- [..] Comparing to other previous devices, the DCMI interface for STM32F446xx
- devices contains the following additional features :
-
- (+) Support of Black and White cameras
-
- ##### How to use this driver #####
- ==============================================================================
- [..] This driver provides functions to manage the Black and White feature
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-/** @defgroup DCMI DCMI
- * @brief DCMI HAL module driver
- * @{
- */
-
-#ifdef HAL_DCMI_MODULE_ENABLED
-
-#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-
-/** @defgroup DCMIEx_Exported_Functions DCMI Extended Exported Functions
- * @{
- */
-
-/** @defgroup DCMIEx_Exported_Functions_Group1 Initialization and Configuration functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and Configuration functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Initialize and configure the DCMI
- (+) De-initialize the DCMI
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the DCMI according to the specified
- * parameters in the DCMI_InitTypeDef and create the associated handle.
- * @param hdcmi: pointer to a DCMI_HandleTypeDef structure that contains
- * the configuration information for DCMI.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi)
-{
- /* Check the DCMI peripheral state */
- if(hdcmi == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check function parameters */
- assert_param(IS_DCMI_ALL_INSTANCE(hdcmi->Instance));
- assert_param(IS_DCMI_PCKPOLARITY(hdcmi->Init.PCKPolarity));
- assert_param(IS_DCMI_VSPOLARITY(hdcmi->Init.VSPolarity));
- assert_param(IS_DCMI_HSPOLARITY(hdcmi->Init.HSPolarity));
- assert_param(IS_DCMI_SYNCHRO(hdcmi->Init.SynchroMode));
- assert_param(IS_DCMI_CAPTURE_RATE(hdcmi->Init.CaptureRate));
- assert_param(IS_DCMI_EXTENDED_DATA(hdcmi->Init.ExtendedDataMode));
- assert_param(IS_DCMI_MODE_JPEG(hdcmi->Init.JPEGMode));
-#if defined(STM32F446xx)
- assert_param(IS_DCMI_BYTE_SELECT_MODE(hdcmi->Init.ByteSelectMode));
- assert_param(IS_DCMI_BYTE_SELECT_START(hdcmi->Init.ByteSelectStart));
- assert_param(IS_DCMI_LINE_SELECT_MODE(hdcmi->Init.LineSelectMode));
- assert_param(IS_DCMI_LINE_SELECT_START(hdcmi->Init.LineSelectStart));
-#endif
- if(hdcmi->State == HAL_DCMI_STATE_RESET)
- {
- /* Init the low level hardware */
- HAL_DCMI_MspInit(hdcmi);
- }
-
- /* Change the DCMI state */
- hdcmi->State = HAL_DCMI_STATE_BUSY;
- /* Configures the HS, VS, DE and PC polarity */
- hdcmi->Instance->CR &= ~(DCMI_CR_PCKPOL | DCMI_CR_HSPOL | DCMI_CR_VSPOL | DCMI_CR_EDM_0 |\
- DCMI_CR_EDM_1 | DCMI_CR_FCRC_0 | DCMI_CR_FCRC_1 | DCMI_CR_JPEG |\
- DCMI_CR_ESS
-#if defined(STM32F446xx)
- | DCMI_CR_BSM_0 | DCMI_CR_BSM_1 | DCMI_CR_OEBS |\
- DCMI_CR_LSM | DCMI_CR_OELS
-#endif
- );
- hdcmi->Instance->CR |= (uint32_t)(hdcmi->Init.SynchroMode | hdcmi->Init.CaptureRate |\
- hdcmi->Init.VSPolarity | hdcmi->Init.HSPolarity |\
- hdcmi->Init.PCKPolarity | hdcmi->Init.ExtendedDataMode |\
- hdcmi->Init.JPEGMode
-#if defined(STM32F446xx)
- | hdcmi->Init.ByteSelectMode |\
- hdcmi->Init.ByteSelectStart | hdcmi->Init.LineSelectMode |\
- hdcmi->Init.LineSelectStart
-#endif
- );
- if(hdcmi->Init.SynchroMode == DCMI_SYNCHRO_EMBEDDED)
- {
- DCMI->ESCR = (((uint32_t)hdcmi->Init.SyncroCode.FrameStartCode) |
- ((uint32_t)hdcmi->Init.SyncroCode.LineStartCode << 8)|
- ((uint32_t)hdcmi->Init.SyncroCode.LineEndCode << 16) |
- ((uint32_t)hdcmi->Init.SyncroCode.FrameEndCode << 24));
-
- }
-
- /* Enable the Line interrupt */
- __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_LINE);
-
- /* Enable the VSYNC interrupt */
- __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_VSYNC);
-
- /* Enable the Frame capture complete interrupt */
- __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_FRAME);
-
- /* Enable the Synchronization error interrupt */
- __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_ERR);
-
- /* Enable the Overflow interrupt */
- __HAL_DCMI_ENABLE_IT(hdcmi, DCMI_IT_OVF);
-
- /* Enable DCMI by setting DCMIEN bit */
- __HAL_DCMI_ENABLE(hdcmi);
-
- /* Update error code */
- hdcmi->ErrorCode = HAL_DCMI_ERROR_NONE;
-
- /* Initialize the DCMI state*/
- hdcmi->State = HAL_DCMI_STATE_READY;
-
- return HAL_OK;
-}
-
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-#endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
-#endif /* HAL_DCMI_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c
deleted file mode 100644
index 420e678..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma.c
+++ /dev/null
@@ -1,928 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_dma.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief DMA HAL module driver.
- *
- * This file provides firmware functions to manage the following
- * functionalities of the Direct Memory Access (DMA) peripheral:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral State and errors functions
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (#) Enable and configure the peripheral to be connected to the DMA Stream
- (except for internal SRAM/FLASH memories: no initialization is
- necessary) please refer to Reference manual for connection between peripherals
- and DMA requests .
-
- (#) For a given Stream, program the required configuration through the following parameters:
- Transfer Direction, Source and Destination data formats,
- Circular, Normal or peripheral flow control mode, Stream Priority level,
- Source and Destination Increment mode, FIFO mode and its Threshold (if needed),
- Burst mode for Source and/or Destination (if needed) using HAL_DMA_Init() function.
-
- *** Polling mode IO operation ***
- =================================
- [..]
- (+) Use HAL_DMA_Start() to start DMA transfer after the configuration of Source
- address and destination address and the Length of data to be transferred
- (+) Use HAL_DMA_PollForTransfer() to poll for the end of current transfer, in this
- case a fixed Timeout can be configured by User depending from his application.
-
- *** Interrupt mode IO operation ***
- ===================================
- [..]
- (+) Configure the DMA interrupt priority using HAL_NVIC_SetPriority()
- (+) Enable the DMA IRQ handler using HAL_NVIC_EnableIRQ()
- (+) Use HAL_DMA_Start_IT() to start DMA transfer after the configuration of
- Source address and destination address and the Length of data to be transferred. In this
- case the DMA interrupt is configured
- (+) Use HAL_DMA_IRQHandler() called under DMA_IRQHandler() Interrupt subroutine
- (+) At the end of data transfer HAL_DMA_IRQHandler() function is executed and user can
- add his own function by customization of function pointer XferCpltCallback and
- XferErrorCallback (i.e a member of DMA handle structure).
- [..]
- (#) Use HAL_DMA_GetState() function to return the DMA state and HAL_DMA_GetError() in case of error
- detection.
-
- (#) Use HAL_DMA_Abort() function to abort the current transfer
-
- -@- In Memory-to-Memory transfer mode, Circular mode is not allowed.
-
- -@- The FIFO is used mainly to reduce bus usage and to allow data packing/unpacking: it is
- possible to set different Data Sizes for the Peripheral and the Memory (ie. you can set
- Half-Word data size for the peripheral to access its data register and set Word data size
- for the Memory to gain in access time. Each two half words will be packed and written in
- a single access to a Word in the Memory).
-
- -@- When FIFO is disabled, it is not allowed to configure different Data Sizes for Source
- and Destination. In this case the Peripheral Data Size will be applied to both Source
- and Destination.
-
- *** DMA HAL driver macros list ***
- =============================================
- [..]
- Below the list of most used macros in DMA HAL driver.
-
- (+) __HAL_DMA_ENABLE: Enable the specified DMA Stream.
- (+) __HAL_DMA_DISABLE: Disable the specified DMA Stream.
- (+) __HAL_DMA_GET_FS: Return the current DMA Stream FIFO filled level.
- (+) __HAL_DMA_GET_FLAG: Get the DMA Stream pending flags.
- (+) __HAL_DMA_CLEAR_FLAG: Clear the DMA Stream pending flags.
- (+) __HAL_DMA_ENABLE_IT: Enable the specified DMA Stream interrupts.
- (+) __HAL_DMA_DISABLE_IT: Disable the specified DMA Stream interrupts.
- (+) __HAL_DMA_GET_IT_SOURCE: Check whether the specified DMA Stream interrupt has occurred or not.
-
- [..]
- (@) You can refer to the DMA HAL driver header file for more useful macros
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup DMA DMA
- * @brief DMA HAL module driver
- * @{
- */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/** @addtogroup DMA_Private_Constants
- * @{
- */
- #define HAL_TIMEOUT_DMA_ABORT ((uint32_t)1000) /* 1s */
-/**
- * @}
- */
-/* Private macros ------------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/** @addtogroup DMA_Private_Functions
- * @{
- */
-static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
-/**
- * @}
- */
-
-/* Exported functions ---------------------------------------------------------*/
-/** @addtogroup DMA_Exported_Functions
- * @{
- */
-
-/** @addtogroup DMA_Exported_Functions_Group1
- *
-@verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..]
- This section provides functions allowing to initialize the DMA Stream source
- and destination addresses, incrementation and data sizes, transfer direction,
- circular/normal mode selection, memory-to-memory mode selection and Stream priority value.
- [..]
- The HAL_DMA_Init() function follows the DMA configuration procedures as described in
- reference manual.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the DMA according to the specified
- * parameters in the DMA_InitTypeDef and create the associated handle.
- * @param hdma: Pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Stream.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma)
-{
- uint32_t tmp = 0;
-
- /* Check the DMA peripheral state */
- if(hdma == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_DMA_STREAM_ALL_INSTANCE(hdma->Instance));
- assert_param(IS_DMA_CHANNEL(hdma->Init.Channel));
- assert_param(IS_DMA_DIRECTION(hdma->Init.Direction));
- assert_param(IS_DMA_PERIPHERAL_INC_STATE(hdma->Init.PeriphInc));
- assert_param(IS_DMA_MEMORY_INC_STATE(hdma->Init.MemInc));
- assert_param(IS_DMA_PERIPHERAL_DATA_SIZE(hdma->Init.PeriphDataAlignment));
- assert_param(IS_DMA_MEMORY_DATA_SIZE(hdma->Init.MemDataAlignment));
- assert_param(IS_DMA_MODE(hdma->Init.Mode));
- assert_param(IS_DMA_PRIORITY(hdma->Init.Priority));
- assert_param(IS_DMA_FIFO_MODE_STATE(hdma->Init.FIFOMode));
- /* Check the memory burst, peripheral burst and FIFO threshold parameters only
- when FIFO mode is enabled */
- if(hdma->Init.FIFOMode != DMA_FIFOMODE_DISABLE)
- {
- assert_param(IS_DMA_FIFO_THRESHOLD(hdma->Init.FIFOThreshold));
- assert_param(IS_DMA_MEMORY_BURST(hdma->Init.MemBurst));
- assert_param(IS_DMA_PERIPHERAL_BURST(hdma->Init.PeriphBurst));
- }
-
- /* Change DMA peripheral state */
- hdma->State = HAL_DMA_STATE_BUSY;
-
- /* Get the CR register value */
- tmp = hdma->Instance->CR;
-
- /* Clear CHSEL, MBURST, PBURST, PL, MSIZE, PSIZE, MINC, PINC, CIRC, DIR, CT and DBM bits */
- tmp &= ((uint32_t)~(DMA_SxCR_CHSEL | DMA_SxCR_MBURST | DMA_SxCR_PBURST | \
- DMA_SxCR_PL | DMA_SxCR_MSIZE | DMA_SxCR_PSIZE | \
- DMA_SxCR_MINC | DMA_SxCR_PINC | DMA_SxCR_CIRC | \
- DMA_SxCR_DIR | DMA_SxCR_CT | DMA_SxCR_DBM));
-
- /* Prepare the DMA Stream configuration */
- tmp |= hdma->Init.Channel | hdma->Init.Direction |
- hdma->Init.PeriphInc | hdma->Init.MemInc |
- hdma->Init.PeriphDataAlignment | hdma->Init.MemDataAlignment |
- hdma->Init.Mode | hdma->Init.Priority;
-
- /* the Memory burst and peripheral burst are not used when the FIFO is disabled */
- if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE)
- {
- /* Get memory burst and peripheral burst */
- tmp |= hdma->Init.MemBurst | hdma->Init.PeriphBurst;
- }
-
- /* Write to DMA Stream CR register */
- hdma->Instance->CR = tmp;
-
- /* Get the FCR register value */
- tmp = hdma->Instance->FCR;
-
- /* Clear Direct mode and FIFO threshold bits */
- tmp &= (uint32_t)~(DMA_SxFCR_DMDIS | DMA_SxFCR_FTH);
-
- /* Prepare the DMA Stream FIFO configuration */
- tmp |= hdma->Init.FIFOMode;
-
- /* the FIFO threshold is not used when the FIFO mode is disabled */
- if(hdma->Init.FIFOMode == DMA_FIFOMODE_ENABLE)
- {
- /* Get the FIFO threshold */
- tmp |= hdma->Init.FIFOThreshold;
- }
-
- /* Write to DMA Stream FCR */
- hdma->Instance->FCR = tmp;
-
- /* Initialize the error code */
- hdma->ErrorCode = HAL_DMA_ERROR_NONE;
-
- /* Initialize the DMA state */
- hdma->State = HAL_DMA_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the DMA peripheral
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Stream.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma)
-{
- /* Check the DMA peripheral state */
- if(hdma == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the DMA peripheral state */
- if(hdma->State == HAL_DMA_STATE_BUSY)
- {
- return HAL_ERROR;
- }
-
- /* Disable the selected DMA Streamx */
- __HAL_DMA_DISABLE(hdma);
-
- /* Reset DMA Streamx control register */
- hdma->Instance->CR = 0;
-
- /* Reset DMA Streamx number of data to transfer register */
- hdma->Instance->NDTR = 0;
-
- /* Reset DMA Streamx peripheral address register */
- hdma->Instance->PAR = 0;
-
- /* Reset DMA Streamx memory 0 address register */
- hdma->Instance->M0AR = 0;
-
- /* Reset DMA Streamx memory 1 address register */
- hdma->Instance->M1AR = 0;
-
- /* Reset DMA Streamx FIFO control register */
- hdma->Instance->FCR = (uint32_t)0x00000021;
-
- /* Clear all flags */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma));
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma));
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma));
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
-
- /* Initialize the error code */
- hdma->ErrorCode = HAL_DMA_ERROR_NONE;
-
- /* Initialize the DMA state */
- hdma->State = HAL_DMA_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hdma);
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @addtogroup DMA_Exported_Functions_Group2
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Configure the source, destination address and data length and Start DMA transfer
- (+) Configure the source, destination address and data length and
- Start DMA transfer with interrupt
- (+) Abort DMA transfer
- (+) Poll for transfer complete
- (+) Handle DMA interrupt request
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Starts the DMA Transfer.
- * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Stream.
- * @param SrcAddress: The source memory Buffer address
- * @param DstAddress: The destination memory Buffer address
- * @param DataLength: The length of data to be transferred from source to destination
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA_Start(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
-{
- /* Process locked */
- __HAL_LOCK(hdma);
-
- /* Change DMA peripheral state */
- hdma->State = HAL_DMA_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_DMA_BUFFER_SIZE(DataLength));
-
- /* Disable the peripheral */
- __HAL_DMA_DISABLE(hdma);
-
- /* Configure the source, destination address and the data length */
- DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
-
- /* Enable the Peripheral */
- __HAL_DMA_ENABLE(hdma);
-
- return HAL_OK;
-}
-
-/**
- * @brief Start the DMA Transfer with interrupt enabled.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Stream.
- * @param SrcAddress: The source memory Buffer address
- * @param DstAddress: The destination memory Buffer address
- * @param DataLength: The length of data to be transferred from source to destination
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
-{
- /* Process locked */
- __HAL_LOCK(hdma);
-
- /* Change DMA peripheral state */
- hdma->State = HAL_DMA_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_DMA_BUFFER_SIZE(DataLength));
-
- /* Disable the peripheral */
- __HAL_DMA_DISABLE(hdma);
-
- /* Configure the source, destination address and the data length */
- DMA_SetConfig(hdma, SrcAddress, DstAddress, DataLength);
-
- /* Enable the transfer complete interrupt */
- __HAL_DMA_ENABLE_IT(hdma, DMA_IT_TC);
-
- /* Enable the Half transfer complete interrupt */
- __HAL_DMA_ENABLE_IT(hdma, DMA_IT_HT);
-
- /* Enable the transfer Error interrupt */
- __HAL_DMA_ENABLE_IT(hdma, DMA_IT_TE);
-
- /* Enable the FIFO Error interrupt */
- __HAL_DMA_ENABLE_IT(hdma, DMA_IT_FE);
-
- /* Enable the direct mode Error interrupt */
- __HAL_DMA_ENABLE_IT(hdma, DMA_IT_DME);
-
- /* Enable the Peripheral */
- __HAL_DMA_ENABLE(hdma);
-
- return HAL_OK;
-}
-
-/**
- * @brief Aborts the DMA Transfer.
- * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Stream.
- *
- * @note After disabling a DMA Stream, a check for wait until the DMA Stream is
- * effectively disabled is added. If a Stream is disabled
- * while a data transfer is ongoing, the current data will be transferred
- * and the Stream will be effectively disabled only after the transfer of
- * this single data is finished.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma)
-{
- uint32_t tickstart = 0;
-
- /* Disable the stream */
- __HAL_DMA_DISABLE(hdma);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Check if the DMA Stream is effectively disabled */
- while((hdma->Instance->CR & DMA_SxCR_EN) != 0)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA_ABORT)
- {
- /* Update error code */
- hdma->ErrorCode |= HAL_DMA_ERROR_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
-
- /* Change the DMA state */
- hdma->State = HAL_DMA_STATE_TIMEOUT;
-
- return HAL_TIMEOUT;
- }
- }
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
-
- /* Change the DMA state*/
- hdma->State = HAL_DMA_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Polling for transfer complete.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Stream.
- * @param CompleteLevel: Specifies the DMA level complete.
- * @param Timeout: Timeout duration.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout)
-{
- uint32_t temp, tmp, tmp1, tmp2;
- uint32_t tickstart = 0;
-
- /* Get the level transfer complete flag */
- if(CompleteLevel == HAL_DMA_FULL_TRANSFER)
- {
- /* Transfer Complete flag */
- temp = __HAL_DMA_GET_TC_FLAG_INDEX(hdma);
- }
- else
- {
- /* Half Transfer Complete flag */
- temp = __HAL_DMA_GET_HT_FLAG_INDEX(hdma);
- }
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(__HAL_DMA_GET_FLAG(hdma, temp) == RESET)
- {
- tmp = __HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma));
- tmp1 = __HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma));
- tmp2 = __HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma));
- if((tmp != RESET) || (tmp1 != RESET) || (tmp2 != RESET))
- {
- if(tmp != RESET)
- {
- /* Update error code */
- hdma->ErrorCode |= HAL_DMA_ERROR_TE;
-
- /* Clear the transfer error flag */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma));
- }
- if(tmp1 != RESET)
- {
- /* Update error code */
- hdma->ErrorCode |= HAL_DMA_ERROR_FE;
-
- /* Clear the FIFO error flag */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma));
- }
- if(tmp2 != RESET)
- {
- /* Update error code */
- hdma->ErrorCode |= HAL_DMA_ERROR_DME;
-
- /* Clear the Direct Mode error flag */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma));
- }
- /* Change the DMA state */
- hdma->State= HAL_DMA_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
-
- return HAL_ERROR;
- }
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Update error code */
- hdma->ErrorCode |= HAL_DMA_ERROR_TIMEOUT;
-
- /* Change the DMA state */
- hdma->State = HAL_DMA_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- if(CompleteLevel == HAL_DMA_FULL_TRANSFER)
- {
- /* Multi_Buffering mode enabled */
- if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != 0)
- {
- /* Clear the half transfer complete flag */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
- /* Clear the transfer complete flag */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
-
- /* Current memory buffer used is Memory 0 */
- if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
- {
- /* Change DMA peripheral state */
- hdma->State = HAL_DMA_STATE_READY_MEM0;
- }
- /* Current memory buffer used is Memory 1 */
- else if((hdma->Instance->CR & DMA_SxCR_CT) != 0)
- {
- /* Change DMA peripheral state */
- hdma->State = HAL_DMA_STATE_READY_MEM1;
- }
- }
- else
- {
- /* Clear the half transfer complete flag */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
- /* Clear the transfer complete flag */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
-
- /* The selected Streamx EN bit is cleared (DMA is disabled and all transfers
- are complete) */
- hdma->State = HAL_DMA_STATE_READY_MEM0;
- }
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
- }
- else
- {
- /* Multi_Buffering mode enabled */
- if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != 0)
- {
- /* Clear the half transfer complete flag */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
-
- /* Current memory buffer used is Memory 0 */
- if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
- {
- /* Change DMA peripheral state */
- hdma->State = HAL_DMA_STATE_READY_HALF_MEM0;
- }
- /* Current memory buffer used is Memory 1 */
- else if((hdma->Instance->CR & DMA_SxCR_CT) != 0)
- {
- /* Change DMA peripheral state */
- hdma->State = HAL_DMA_STATE_READY_HALF_MEM1;
- }
- }
- else
- {
- /* Clear the half transfer complete flag */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
-
- /* Change DMA peripheral state */
- hdma->State = HAL_DMA_STATE_READY_HALF_MEM0;
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief Handles DMA interrupt request.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Stream.
- * @retval None
- */
-void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma)
-{
- /* Transfer Error Interrupt management ***************************************/
- if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma)) != RESET)
- {
- if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TE) != RESET)
- {
- /* Disable the transfer error interrupt */
- __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TE);
-
- /* Clear the transfer error flag */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma));
-
- /* Update error code */
- hdma->ErrorCode |= HAL_DMA_ERROR_TE;
-
- /* Change the DMA state */
- hdma->State = HAL_DMA_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
-
- if(hdma->XferErrorCallback != NULL)
- {
- /* Transfer error callback */
- hdma->XferErrorCallback(hdma);
- }
- }
- }
- /* FIFO Error Interrupt management ******************************************/
- if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma)) != RESET)
- {
- if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_FE) != RESET)
- {
- /* Disable the FIFO Error interrupt */
- __HAL_DMA_DISABLE_IT(hdma, DMA_IT_FE);
-
- /* Clear the FIFO error flag */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_FE_FLAG_INDEX(hdma));
-
- /* Update error code */
- hdma->ErrorCode |= HAL_DMA_ERROR_FE;
-
- /* Change the DMA state */
- hdma->State = HAL_DMA_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
-
- if(hdma->XferErrorCallback != NULL)
- {
- /* Transfer error callback */
- hdma->XferErrorCallback(hdma);
- }
- }
- }
- /* Direct Mode Error Interrupt management ***********************************/
- if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma)) != RESET)
- {
- if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_DME) != RESET)
- {
- /* Disable the direct mode Error interrupt */
- __HAL_DMA_DISABLE_IT(hdma, DMA_IT_DME);
-
- /* Clear the direct mode error flag */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_DME_FLAG_INDEX(hdma));
-
- /* Update error code */
- hdma->ErrorCode |= HAL_DMA_ERROR_DME;
-
- /* Change the DMA state */
- hdma->State = HAL_DMA_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
-
- if(hdma->XferErrorCallback != NULL)
- {
- /* Transfer error callback */
- hdma->XferErrorCallback(hdma);
- }
- }
- }
- /* Half Transfer Complete Interrupt management ******************************/
- if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma)) != RESET)
- {
- if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_HT) != RESET)
- {
- /* Multi_Buffering mode enabled */
- if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != 0)
- {
- /* Clear the half transfer complete flag */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
-
- /* Current memory buffer used is Memory 0 */
- if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
- {
- /* Change DMA peripheral state */
- hdma->State = HAL_DMA_STATE_READY_HALF_MEM0;
- }
- /* Current memory buffer used is Memory 1 */
- else if((hdma->Instance->CR & DMA_SxCR_CT) != 0)
- {
- /* Change DMA peripheral state */
- hdma->State = HAL_DMA_STATE_READY_HALF_MEM1;
- }
- }
- else
- {
- /* Disable the half transfer interrupt if the DMA mode is not CIRCULAR */
- if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
- {
- /* Disable the half transfer interrupt */
- __HAL_DMA_DISABLE_IT(hdma, DMA_IT_HT);
- }
- /* Clear the half transfer complete flag */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma));
-
- /* Change DMA peripheral state */
- hdma->State = HAL_DMA_STATE_READY_HALF_MEM0;
- }
-
- if(hdma->XferHalfCpltCallback != NULL)
- {
- /* Half transfer callback */
- hdma->XferHalfCpltCallback(hdma);
- }
- }
- }
- /* Transfer Complete Interrupt management ***********************************/
- if(__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma)) != RESET)
- {
- if(__HAL_DMA_GET_IT_SOURCE(hdma, DMA_IT_TC) != RESET)
- {
- if(((hdma->Instance->CR) & (uint32_t)(DMA_SxCR_DBM)) != 0)
- {
- /* Clear the transfer complete flag */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
-
- /* Current memory buffer used is Memory 1 */
- if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
- {
- if(hdma->XferM1CpltCallback != NULL)
- {
- /* Transfer complete Callback for memory1 */
- hdma->XferM1CpltCallback(hdma);
- }
- }
- /* Current memory buffer used is Memory 0 */
- else if((hdma->Instance->CR & DMA_SxCR_CT) != 0)
- {
- if(hdma->XferCpltCallback != NULL)
- {
- /* Transfer complete Callback for memory0 */
- hdma->XferCpltCallback(hdma);
- }
- }
- }
- /* Disable the transfer complete interrupt if the DMA mode is not CIRCULAR */
- else
- {
- if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
- {
- /* Disable the transfer complete interrupt */
- __HAL_DMA_DISABLE_IT(hdma, DMA_IT_TC);
- }
- /* Clear the transfer complete flag */
- __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma));
-
- /* Update error code */
- hdma->ErrorCode |= HAL_DMA_ERROR_NONE;
-
- /* Change the DMA state */
- hdma->State = HAL_DMA_STATE_READY_MEM0;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdma);
-
- if(hdma->XferCpltCallback != NULL)
- {
- /* Transfer complete callback */
- hdma->XferCpltCallback(hdma);
- }
- }
- }
- }
-}
-
-/**
- * @}
- */
-
-/** @addtogroup DMA_Exported_Functions_Group3
- *
-@verbatim
- ===============================================================================
- ##### State and Errors functions #####
- ===============================================================================
- [..]
- This subsection provides functions allowing to
- (+) Check the DMA state
- (+) Get error code
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Returns the DMA state.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Stream.
- * @retval HAL state
- */
-HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma)
-{
- return hdma->State;
-}
-
-/**
- * @brief Return the DMA error code
- * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Stream.
- * @retval DMA Error Code
- */
-uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma)
-{
- return hdma->ErrorCode;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @addtogroup DMA_Private_Functions
- * @{
- */
-
-/**
- * @brief Sets the DMA Transfer parameter.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Stream.
- * @param SrcAddress: The source memory Buffer address
- * @param DstAddress: The destination memory Buffer address
- * @param DataLength: The length of data to be transferred from source to destination
- * @retval HAL status
- */
-static void DMA_SetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
-{
- /* Clear DBM bit */
- hdma->Instance->CR &= (uint32_t)(~DMA_SxCR_DBM);
-
- /* Configure DMA Stream data length */
- hdma->Instance->NDTR = DataLength;
-
- /* Peripheral to Memory */
- if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
- {
- /* Configure DMA Stream destination address */
- hdma->Instance->PAR = DstAddress;
-
- /* Configure DMA Stream source address */
- hdma->Instance->M0AR = SrcAddress;
- }
- /* Memory to Peripheral */
- else
- {
- /* Configure DMA Stream source address */
- hdma->Instance->PAR = SrcAddress;
-
- /* Configure DMA Stream destination address */
- hdma->Instance->M0AR = DstAddress;
- }
-}
-/**
- * @}
- */
-
-#endif /* HAL_DMA_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma2d.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma2d.c
deleted file mode 100644
index a9d244c..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma2d.c
+++ /dev/null
@@ -1,1266 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_dma2d.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief DMA2D HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the DMA2D peripheral:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral Control functions
- * + Peripheral State and Errors functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (#) Program the required configuration through following parameters:
- the Transfer Mode, the output color mode and the output offset using
- HAL_DMA2D_Init() function.
-
- (#) Program the required configuration through following parameters:
- the input color mode, the input color, input alpha value, alpha mode
- and the input offset using HAL_DMA2D_ConfigLayer() function for foreground
- or/and background layer.
-
- *** Polling mode IO operation ***
- =================================
- [..]
- (+) Configure the pdata, Destination and data length and Enable
- the transfer using HAL_DMA2D_Start()
- (+) Wait for end of transfer using HAL_DMA2D_PollForTransfer(), at this stage
- user can specify the value of timeout according to his end application.
-
- *** Interrupt mode IO operation ***
- ===================================
- [..]
- (#) Configure the pdata, Destination and data length and Enable
- the transfer using HAL_DMA2D_Start_IT()
- (#) Use HAL_DMA2D_IRQHandler() called under DMA2D_IRQHandler() Interrupt subroutine
- (#) At the end of data transfer HAL_DMA2D_IRQHandler() function is executed and user can
- add his own function by customization of function pointer XferCpltCallback and
- XferErrorCallback (i.e a member of DMA2D handle structure).
-
- -@- In Register-to-Memory transfer mode, the pdata parameter is the register
- color, in Memory-to-memory or memory-to-memory with pixel format
- conversion the pdata is the source address.
-
- -@- Configure the foreground source address, the background source address,
- the Destination and data length and Enable the transfer using
- HAL_DMA2D_BlendingStart() in polling mode and HAL_DMA2D_BlendingStart_IT()
- in interrupt mode.
-
- -@- HAL_DMA2D_BlendingStart() and HAL_DMA2D_BlendingStart_IT() functions
- are used if the memory to memory with blending transfer mode is selected.
-
- (#) Optionally, configure and enable the CLUT using HAL_DMA2D_ConfigCLUT()
- HAL_DMA2D_EnableCLUT() functions.
-
- (#) Optionally, configure and enable LineInterrupt using the following function:
- HAL_DMA2D_ProgramLineEvent().
-
- (#) The transfer can be suspended, continued and aborted using the following
- functions: HAL_DMA2D_Suspend(), HAL_DMA2D_Resume(), HAL_DMA2D_Abort().
-
- (#) To control DMA2D state you can use the following function: HAL_DMA2D_GetState()
-
- *** DMA2D HAL driver macros list ***
- =============================================
- [..]
- Below the list of most used macros in DMA2D HAL driver :
-
- (+) __HAL_DMA2D_ENABLE: Enable the DMA2D peripheral.
- (+) __HAL_DMA2D_DISABLE: Disable the DMA2D peripheral.
- (+) __HAL_DMA2D_GET_FLAG: Get the DMA2D pending flags.
- (+) __HAL_DMA2D_CLEAR_FLAG: Clear the DMA2D pending flags.
- (+) __HAL_DMA2D_ENABLE_IT: Enable the specified DMA2D interrupts.
- (+) __HAL_DMA2D_DISABLE_IT: Disable the specified DMA2D interrupts.
- (+) __HAL_DMA2D_GET_IT_SOURCE: Check whether the specified DMA2D interrupt has occurred or not.
-
- [..]
- (@) You can refer to the DMA2D HAL driver header file for more useful macros
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-/** @addtogroup DMA2D
- * @brief DMA2D HAL module driver
- * @{
- */
-
-#ifdef HAL_DMA2D_MODULE_ENABLED
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
-
-/* Private types -------------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @addtogroup DMA2D_Private_Defines
- * @{
- */
-#define HAL_TIMEOUT_DMA2D_ABORT ((uint32_t)1000) /* 1s */
-#define HAL_TIMEOUT_DMA2D_SUSPEND ((uint32_t)1000) /* 1s */
-/**
- * @}
- */
-
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @addtogroup DMA2D_Private_Functions_Prototypes
- * @{
- */
-static void DMA2D_SetConfig(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height);
-/**
- * @}
- */
-
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup DMA2D_Exported_Functions
- * @{
- */
-
-/** @defgroup DMA2D_Group1 Initialization and Configuration functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and Configuration functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Initialize and configure the DMA2D
- (+) De-initialize the DMA2D
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the DMA2D according to the specified
- * parameters in the DMA2D_InitTypeDef and create the associated handle.
- * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
- * the configuration information for the DMA2D.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d)
-{
- uint32_t tmp = 0;
-
- /* Check the DMA2D peripheral state */
- if(hdma2d == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_DMA2D_ALL_INSTANCE(hdma2d->Instance));
- assert_param(IS_DMA2D_MODE(hdma2d->Init.Mode));
- assert_param(IS_DMA2D_CMODE(hdma2d->Init.ColorMode));
- assert_param(IS_DMA2D_OFFSET(hdma2d->Init.OutputOffset));
-
- if(hdma2d->State == HAL_DMA2D_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hdma2d->Lock = HAL_UNLOCKED;
- /* Init the low level hardware */
- HAL_DMA2D_MspInit(hdma2d);
- }
-
- /* Change DMA2D peripheral state */
- hdma2d->State = HAL_DMA2D_STATE_BUSY;
-
-/* DMA2D CR register configuration -------------------------------------------*/
- /* Get the CR register value */
- tmp = hdma2d->Instance->CR;
-
- /* Clear Mode bits */
- tmp &= (uint32_t)~DMA2D_CR_MODE;
-
- /* Prepare the value to be wrote to the CR register */
- tmp |= hdma2d->Init.Mode;
-
- /* Write to DMA2D CR register */
- hdma2d->Instance->CR = tmp;
-
-/* DMA2D OPFCCR register configuration ---------------------------------------*/
- /* Get the OPFCCR register value */
- tmp = hdma2d->Instance->OPFCCR;
-
- /* Clear Color Mode bits */
- tmp &= (uint32_t)~DMA2D_OPFCCR_CM;
-
- /* Prepare the value to be wrote to the OPFCCR register */
- tmp |= hdma2d->Init.ColorMode;
-
- /* Write to DMA2D OPFCCR register */
- hdma2d->Instance->OPFCCR = tmp;
-
-/* DMA2D OOR register configuration ------------------------------------------*/
- /* Get the OOR register value */
- tmp = hdma2d->Instance->OOR;
-
- /* Clear Offset bits */
- tmp &= (uint32_t)~DMA2D_OOR_LO;
-
- /* Prepare the value to be wrote to the OOR register */
- tmp |= hdma2d->Init.OutputOffset;
-
- /* Write to DMA2D OOR register */
- hdma2d->Instance->OOR = tmp;
-
- /* Update error code */
- hdma2d->ErrorCode = HAL_DMA2D_ERROR_NONE;
-
- /* Initialize the DMA2D state*/
- hdma2d->State = HAL_DMA2D_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Deinitializes the DMA2D peripheral registers to their default reset
- * values.
- * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
- * the configuration information for the DMA2D.
- * @retval None
- */
-
-HAL_StatusTypeDef HAL_DMA2D_DeInit(DMA2D_HandleTypeDef *hdma2d)
-{
- /* Check the DMA2D peripheral state */
- if(hdma2d == NULL)
- {
- return HAL_ERROR;
- }
-
- /* DeInit the low level hardware */
- HAL_DMA2D_MspDeInit(hdma2d);
-
- /* Update error code */
- hdma2d->ErrorCode = HAL_DMA2D_ERROR_NONE;
-
- /* Initialize the DMA2D state*/
- hdma2d->State = HAL_DMA2D_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hdma2d);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the DMA2D MSP.
- * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
- * the configuration information for the DMA2D.
- * @retval None
- */
-__weak void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_DMA2D_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes the DMA2D MSP.
- * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
- * the configuration information for the DMA2D.
- * @retval None
- */
-__weak void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_DMA2D_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup DMA2D_Group2 IO operation functions
- * @brief IO operation functions
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Configure the pdata, destination address and data size and
- Start DMA2D transfer.
- (+) Configure the source for foreground and background, destination address
- and data size and Start MultiBuffer DMA2D transfer.
- (+) Configure the pdata, destination address and data size and
- Start DMA2D transfer with interrupt.
- (+) Configure the source for foreground and background, destination address
- and data size and Start MultiBuffer DMA2D transfer with interrupt.
- (+) Abort DMA2D transfer.
- (+) Suspend DMA2D transfer.
- (+) Continue DMA2D transfer.
- (+) Poll for transfer complete.
- (+) handle DMA2D interrupt request.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Start the DMA2D Transfer.
- * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
- * the configuration information for the DMA2D.
- * @param pdata: Configure the source memory Buffer address if
- * the memory to memory or memory to memory with pixel format
- * conversion DMA2D mode is selected, and configure
- * the color value if register to memory DMA2D mode is selected.
- * @param DstAddress: The destination memory Buffer address.
- * @param Width: The width of data to be transferred from source to destination.
- * @param Height: The height of data to be transferred from source to destination.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height)
-{
- /* Process locked */
- __HAL_LOCK(hdma2d);
-
- /* Change DMA2D peripheral state */
- hdma2d->State = HAL_DMA2D_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_DMA2D_LINE(Height));
- assert_param(IS_DMA2D_PIXEL(Width));
-
- /* Disable the Peripheral */
- __HAL_DMA2D_DISABLE(hdma2d);
-
- /* Configure the source, destination address and the data size */
- DMA2D_SetConfig(hdma2d, pdata, DstAddress, Width, Height);
-
- /* Enable the Peripheral */
- __HAL_DMA2D_ENABLE(hdma2d);
-
- return HAL_OK;
-}
-
-/**
- * @brief Start the DMA2D Transfer with interrupt enabled.
- * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
- * the configuration information for the DMA2D.
- * @param pdata: Configure the source memory Buffer address if
- * the memory to memory or memory to memory with pixel format
- * conversion DMA2D mode is selected, and configure
- * the color value if register to memory DMA2D mode is selected.
- * @param DstAddress: The destination memory Buffer address.
- * @param Width: The width of data to be transferred from source to destination.
- * @param Height: The height of data to be transferred from source to destination.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height)
-{
- /* Process locked */
- __HAL_LOCK(hdma2d);
-
- /* Change DMA2D peripheral state */
- hdma2d->State = HAL_DMA2D_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_DMA2D_LINE(Height));
- assert_param(IS_DMA2D_PIXEL(Width));
-
- /* Disable the Peripheral */
- __HAL_DMA2D_DISABLE(hdma2d);
-
- /* Configure the source, destination address and the data size */
- DMA2D_SetConfig(hdma2d, pdata, DstAddress, Width, Height);
-
- /* Enable the transfer complete interrupt */
- __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TC);
-
- /* Enable the transfer Error interrupt */
- __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TE);
-
- /* Enable the Peripheral */
- __HAL_DMA2D_ENABLE(hdma2d);
-
- /* Enable the configuration error interrupt */
- __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CE);
-
- return HAL_OK;
-}
-
-/**
- * @brief Start the multi-source DMA2D Transfer.
- * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
- * the configuration information for the DMA2D.
- * @param SrcAddress1: The source memory Buffer address of the foreground layer.
- * @param SrcAddress2: The source memory Buffer address of the background layer.
- * @param DstAddress: The destination memory Buffer address
- * @param Width: The width of data to be transferred from source to destination.
- * @param Height: The height of data to be transferred from source to destination.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height)
-{
- /* Process locked */
- __HAL_LOCK(hdma2d);
-
- /* Change DMA2D peripheral state */
- hdma2d->State = HAL_DMA2D_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_DMA2D_LINE(Height));
- assert_param(IS_DMA2D_PIXEL(Width));
-
- /* Disable the Peripheral */
- __HAL_DMA2D_DISABLE(hdma2d);
-
- /* Configure DMA2D Stream source2 address */
- hdma2d->Instance->BGMAR = SrcAddress2;
-
- /* Configure the source, destination address and the data size */
- DMA2D_SetConfig(hdma2d, SrcAddress1, DstAddress, Width, Height);
-
- /* Enable the Peripheral */
- __HAL_DMA2D_ENABLE(hdma2d);
-
- return HAL_OK;
-}
-
-/**
- * @brief Start the multi-source DMA2D Transfer with interrupt enabled.
- * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
- * the configuration information for the DMA2D.
- * @param SrcAddress1: The source memory Buffer address of the foreground layer.
- * @param SrcAddress2: The source memory Buffer address of the background layer.
- * @param DstAddress: The destination memory Buffer address.
- * @param Width: The width of data to be transferred from source to destination.
- * @param Height: The height of data to be transferred from source to destination.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height)
-{
- /* Process locked */
- __HAL_LOCK(hdma2d);
-
- /* Change DMA2D peripheral state */
- hdma2d->State = HAL_DMA2D_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_DMA2D_LINE(Height));
- assert_param(IS_DMA2D_PIXEL(Width));
-
- /* Disable the Peripheral */
- __HAL_DMA2D_DISABLE(hdma2d);
-
- /* Configure DMA2D Stream source2 address */
- hdma2d->Instance->BGMAR = SrcAddress2;
-
- /* Configure the source, destination address and the data size */
- DMA2D_SetConfig(hdma2d, SrcAddress1, DstAddress, Width, Height);
-
- /* Enable the configuration error interrupt */
- __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_CE);
-
- /* Enable the transfer complete interrupt */
- __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TC);
-
- /* Enable the transfer Error interrupt */
- __HAL_DMA2D_ENABLE_IT(hdma2d, DMA2D_IT_TE);
-
- /* Enable the Peripheral */
- __HAL_DMA2D_ENABLE(hdma2d);
-
- return HAL_OK;
-}
-
-/**
- * @brief Abort the DMA2D Transfer.
- * @param hdma2d : pointer to a DMA2D_HandleTypeDef structure that contains
- * the configuration information for the DMA2D.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d)
-{
- uint32_t tickstart = 0;
-
- /* Disable the DMA2D */
- __HAL_DMA2D_DISABLE(hdma2d);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Check if the DMA2D is effectively disabled */
- while((hdma2d->Instance->CR & DMA2D_CR_START) != 0)
- {
- if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA2D_ABORT)
- {
- /* Update error code */
- hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
-
- /* Change the DMA2D state */
- hdma2d->State= HAL_DMA2D_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdma2d);
-
- return HAL_TIMEOUT;
- }
- }
- /* Process Unlocked */
- __HAL_UNLOCK(hdma2d);
-
- /* Change the DMA2D state*/
- hdma2d->State = HAL_DMA2D_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Suspend the DMA2D Transfer.
- * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
- * the configuration information for the DMA2D.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d)
-{
- uint32_t tickstart = 0;
-
- /* Suspend the DMA2D transfer */
- hdma2d->Instance->CR |= DMA2D_CR_SUSP;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Check if the DMA2D is effectively suspended */
- while((hdma2d->Instance->CR & DMA2D_CR_SUSP) != DMA2D_CR_SUSP)
- {
- if((HAL_GetTick() - tickstart ) > HAL_TIMEOUT_DMA2D_SUSPEND)
- {
- /* Update error code */
- hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
-
- /* Change the DMA2D state */
- hdma2d->State= HAL_DMA2D_STATE_TIMEOUT;
-
- return HAL_TIMEOUT;
- }
- }
- /* Change the DMA2D state*/
- hdma2d->State = HAL_DMA2D_STATE_SUSPEND;
-
- return HAL_OK;
-}
-
-/**
- * @brief Resume the DMA2D Transfer.
- * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
- * the configuration information for the DMA2D.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d)
-{
- /* Resume the DMA2D transfer */
- hdma2d->Instance->CR &= ~DMA2D_CR_SUSP;
-
- /* Change the DMA2D state*/
- hdma2d->State = HAL_DMA2D_STATE_BUSY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Polling for transfer complete or CLUT loading.
- * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
- * the configuration information for the DMA2D.
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout)
-{
- uint32_t tmp, tmp1;
- uint32_t tickstart = 0;
-
- /* Polling for DMA2D transfer */
- if((hdma2d->Instance->CR & DMA2D_CR_START) != 0)
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TC) == RESET)
- {
- tmp = __HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_CE);
- tmp1 = __HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TE);
-
- if((tmp != RESET) || (tmp1 != RESET))
- {
- /* Clear the transfer and configuration error flags */
- __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CE);
- __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TE);
-
- /* Change DMA2D state */
- hdma2d->State= HAL_DMA2D_STATE_ERROR;
-
- /* Process unlocked */
- __HAL_UNLOCK(hdma2d);
-
- return HAL_ERROR;
- }
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Process unlocked */
- __HAL_UNLOCK(hdma2d);
-
- /* Update error code */
- hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
-
- /* Change the DMA2D state */
- hdma2d->State= HAL_DMA2D_STATE_TIMEOUT;
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- /* Polling for CLUT loading */
- if((hdma2d->Instance->FGPFCCR & DMA2D_FGPFCCR_START) != 0)
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_CTC) == RESET)
- {
- if((__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_CAE) != RESET))
- {
- /* Clear the transfer and configuration error flags */
- __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CAE);
-
- /* Change DMA2D state */
- hdma2d->State= HAL_DMA2D_STATE_ERROR;
-
- return HAL_ERROR;
- }
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Update error code */
- hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TIMEOUT;
-
- /* Change the DMA2D state */
- hdma2d->State= HAL_DMA2D_STATE_TIMEOUT;
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- /* Clear the transfer complete flag */
- __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TC);
-
- /* Clear the CLUT loading flag */
- __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CTC);
-
- /* Change DMA2D state */
- hdma2d->State = HAL_DMA2D_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hdma2d);
-
- return HAL_OK;
-}
-/**
- * @brief Handles DMA2D interrupt request.
- * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
- * the configuration information for the DMA2D.
- * @retval HAL status
- */
-void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d)
-{
- /* Transfer Error Interrupt management ***************************************/
- if(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TE) != RESET)
- {
- if(__HAL_DMA2D_GET_IT_SOURCE(hdma2d, DMA2D_IT_TE) != RESET)
- {
- /* Disable the transfer Error interrupt */
- __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TE);
-
- /* Update error code */
- hdma2d->ErrorCode |= HAL_DMA2D_ERROR_TE;
-
- /* Clear the transfer error flag */
- __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TE);
-
- /* Change DMA2D state */
- hdma2d->State = HAL_DMA2D_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdma2d);
-
- if(hdma2d->XferErrorCallback != NULL)
- {
- /* Transfer error Callback */
- hdma2d->XferErrorCallback(hdma2d);
- }
- }
- }
- /* Configuration Error Interrupt management **********************************/
- if(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_CE) != RESET)
- {
- if(__HAL_DMA2D_GET_IT_SOURCE(hdma2d, DMA2D_IT_CE) != RESET)
- {
- /* Disable the Configuration Error interrupt */
- __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_CE);
-
- /* Clear the Configuration error flag */
- __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_CE);
-
- /* Update error code */
- hdma2d->ErrorCode |= HAL_DMA2D_ERROR_CE;
-
- /* Change DMA2D state */
- hdma2d->State = HAL_DMA2D_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdma2d);
-
- if(hdma2d->XferErrorCallback != NULL)
- {
- /* Transfer error Callback */
- hdma2d->XferErrorCallback(hdma2d);
- }
- }
- }
- /* Transfer Complete Interrupt management ************************************/
- if(__HAL_DMA2D_GET_FLAG(hdma2d, DMA2D_FLAG_TC) != RESET)
- {
- if(__HAL_DMA2D_GET_IT_SOURCE(hdma2d, DMA2D_IT_TC) != RESET)
- {
- /* Disable the transfer complete interrupt */
- __HAL_DMA2D_DISABLE_IT(hdma2d, DMA2D_IT_TC);
-
- /* Clear the transfer complete flag */
- __HAL_DMA2D_CLEAR_FLAG(hdma2d, DMA2D_FLAG_TC);
-
- /* Update error code */
- hdma2d->ErrorCode |= HAL_DMA2D_ERROR_NONE;
-
- /* Change DMA2D state */
- hdma2d->State = HAL_DMA2D_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hdma2d);
-
- if(hdma2d->XferCpltCallback != NULL)
- {
- /* Transfer complete Callback */
- hdma2d->XferCpltCallback(hdma2d);
- }
- }
- }
-}
-
-/**
- * @}
- */
-
-/** @defgroup DMA2D_Group3 Peripheral Control functions
- * @brief Peripheral Control functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Control functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Configure the DMA2D foreground or/and background parameters.
- (+) Configure the DMA2D CLUT transfer.
- (+) Enable DMA2D CLUT.
- (+) Disable DMA2D CLUT.
- (+) Configure the line watermark
-
-@endverbatim
- * @{
- */
-/**
- * @brief Configure the DMA2D Layer according to the specified
- * parameters in the DMA2D_InitTypeDef and create the associated handle.
- * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
- * the configuration information for the DMA2D.
- * @param LayerIdx: DMA2D Layer index.
- * This parameter can be one of the following values:
- * 0(background) / 1(foreground)
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx)
-{
- DMA2D_LayerCfgTypeDef *pLayerCfg = &hdma2d->LayerCfg[LayerIdx];
-
- uint32_t tmp = 0;
-
- /* Process locked */
- __HAL_LOCK(hdma2d);
-
- /* Change DMA2D peripheral state */
- hdma2d->State = HAL_DMA2D_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_DMA2D_LAYER(LayerIdx));
- assert_param(IS_DMA2D_OFFSET(pLayerCfg->InputOffset));
- if(hdma2d->Init.Mode != DMA2D_R2M)
- {
- assert_param(IS_DMA2D_INPUT_COLOR_MODE(pLayerCfg->InputColorMode));
- if(hdma2d->Init.Mode != DMA2D_M2M)
- {
- assert_param(IS_DMA2D_ALPHA_MODE(pLayerCfg->AlphaMode));
- }
- }
-
- /* Configure the background DMA2D layer */
- if(LayerIdx == 0)
- {
- /* DMA2D BGPFCR register configuration -----------------------------------*/
- /* Get the BGPFCCR register value */
- tmp = hdma2d->Instance->BGPFCCR;
-
- /* Clear Input color mode, alpha value and alpha mode bits */
- tmp &= (uint32_t)~(DMA2D_BGPFCCR_CM | DMA2D_BGPFCCR_AM | DMA2D_BGPFCCR_ALPHA);
-
- if ((pLayerCfg->InputColorMode == CM_A4) || (pLayerCfg->InputColorMode == CM_A8))
- {
- /* Prepare the value to be wrote to the BGPFCCR register */
- tmp |= (pLayerCfg->InputColorMode | (pLayerCfg->AlphaMode << 16) | ((pLayerCfg->InputAlpha) & 0xFF000000));
- }
- else
- {
- /* Prepare the value to be wrote to the BGPFCCR register */
- tmp |= (pLayerCfg->InputColorMode | (pLayerCfg->AlphaMode << 16) | (pLayerCfg->InputAlpha << 24));
- }
-
- /* Write to DMA2D BGPFCCR register */
- hdma2d->Instance->BGPFCCR = tmp;
-
- /* DMA2D BGOR register configuration -------------------------------------*/
- /* Get the BGOR register value */
- tmp = hdma2d->Instance->BGOR;
-
- /* Clear colors bits */
- tmp &= (uint32_t)~DMA2D_BGOR_LO;
-
- /* Prepare the value to be wrote to the BGOR register */
- tmp |= pLayerCfg->InputOffset;
-
- /* Write to DMA2D BGOR register */
- hdma2d->Instance->BGOR = tmp;
-
- if ((pLayerCfg->InputColorMode == CM_A4) || (pLayerCfg->InputColorMode == CM_A8))
- {
- /* Prepare the value to be wrote to the BGCOLR register */
- tmp = ((pLayerCfg->InputAlpha) & 0x00FFFFFF);
-
- /* Write to DMA2D BGCOLR register */
- hdma2d->Instance->BGCOLR = tmp;
- }
- }
- /* Configure the foreground DMA2D layer */
- else
- {
- /* DMA2D FGPFCR register configuration -----------------------------------*/
- /* Get the FGPFCCR register value */
- tmp = hdma2d->Instance->FGPFCCR;
-
- /* Clear Input color mode, alpha value and alpha mode bits */
- tmp &= (uint32_t)~(DMA2D_FGPFCCR_CM | DMA2D_FGPFCCR_AM | DMA2D_FGPFCCR_ALPHA);
-
- if ((pLayerCfg->InputColorMode == CM_A4) || (pLayerCfg->InputColorMode == CM_A8))
- {
- /* Prepare the value to be wrote to the FGPFCCR register */
- tmp |= (pLayerCfg->InputColorMode | (pLayerCfg->AlphaMode << 16) | ((pLayerCfg->InputAlpha) & 0xFF000000));
- }
- else
- {
- /* Prepare the value to be wrote to the FGPFCCR register */
- tmp |= (pLayerCfg->InputColorMode | (pLayerCfg->AlphaMode << 16) | (pLayerCfg->InputAlpha << 24));
- }
-
- /* Write to DMA2D FGPFCCR register */
- hdma2d->Instance->FGPFCCR = tmp;
-
- /* DMA2D FGOR register configuration -------------------------------------*/
- /* Get the FGOR register value */
- tmp = hdma2d->Instance->FGOR;
-
- /* Clear colors bits */
- tmp &= (uint32_t)~DMA2D_FGOR_LO;
-
- /* Prepare the value to be wrote to the FGOR register */
- tmp |= pLayerCfg->InputOffset;
-
- /* Write to DMA2D FGOR register */
- hdma2d->Instance->FGOR = tmp;
-
- if ((pLayerCfg->InputColorMode == CM_A4) || (pLayerCfg->InputColorMode == CM_A8))
- {
- /* Prepare the value to be wrote to the FGCOLR register */
- tmp = ((pLayerCfg->InputAlpha) & 0x00FFFFFF);
-
- /* Write to DMA2D FGCOLR register */
- hdma2d->Instance->FGCOLR = tmp;
- }
- }
- /* Initialize the DMA2D state*/
- hdma2d->State = HAL_DMA2D_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hdma2d);
-
- return HAL_OK;
-}
-
-/**
- * @brief Configure the DMA2D CLUT Transfer.
- * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
- * the configuration information for the DMA2D.
- * @param CLUTCfg: pointer to a DMA2D_CLUTCfgTypeDef structure that contains
- * the configuration information for the color look up table.
- * @param LayerIdx: DMA2D Layer index.
- * This parameter can be one of the following values:
- * 0(background) / 1(foreground)
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx)
-{
- uint32_t tmp = 0, tmp1 = 0;
-
- /* Check the parameters */
- assert_param(IS_DMA2D_LAYER(LayerIdx));
- assert_param(IS_DMA2D_CLUT_CM(CLUTCfg.CLUTColorMode));
- assert_param(IS_DMA2D_CLUT_SIZE(CLUTCfg.Size));
-
- /* Configure the CLUT of the background DMA2D layer */
- if(LayerIdx == 0)
- {
- /* Get the BGCMAR register value */
- tmp = hdma2d->Instance->BGCMAR;
-
- /* Clear CLUT address bits */
- tmp &= (uint32_t)~DMA2D_BGCMAR_MA;
-
- /* Prepare the value to be wrote to the BGCMAR register */
- tmp |= (uint32_t)CLUTCfg.pCLUT;
-
- /* Write to DMA2D BGCMAR register */
- hdma2d->Instance->BGCMAR = tmp;
-
- /* Get the BGPFCCR register value */
- tmp = hdma2d->Instance->BGPFCCR;
-
- /* Clear CLUT size and CLUT address bits */
- tmp &= (uint32_t)~(DMA2D_BGPFCCR_CS | DMA2D_BGPFCCR_CCM);
-
- /* Get the CLUT size */
- tmp1 = CLUTCfg.Size << 16;
-
- /* Prepare the value to be wrote to the BGPFCCR register */
- tmp |= (CLUTCfg.CLUTColorMode | tmp1);
-
- /* Write to DMA2D BGPFCCR register */
- hdma2d->Instance->BGPFCCR = tmp;
- }
- /* Configure the CLUT of the foreground DMA2D layer */
- else
- {
- /* Get the FGCMAR register value */
- tmp = hdma2d->Instance->FGCMAR;
-
- /* Clear CLUT address bits */
- tmp &= (uint32_t)~DMA2D_FGCMAR_MA;
-
- /* Prepare the value to be wrote to the FGCMAR register */
- tmp |= (uint32_t)CLUTCfg.pCLUT;
-
- /* Write to DMA2D FGCMAR register */
- hdma2d->Instance->FGCMAR = tmp;
-
- /* Get the FGPFCCR register value */
- tmp = hdma2d->Instance->FGPFCCR;
-
- /* Clear CLUT size and CLUT address bits */
- tmp &= (uint32_t)~(DMA2D_FGPFCCR_CS | DMA2D_FGPFCCR_CCM);
-
- /* Get the CLUT size */
- tmp1 = CLUTCfg.Size << 8;
-
- /* Prepare the value to be wrote to the FGPFCCR register */
- tmp |= (CLUTCfg.CLUTColorMode | tmp1);
-
- /* Write to DMA2D FGPFCCR register */
- hdma2d->Instance->FGPFCCR = tmp;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Enable the DMA2D CLUT Transfer.
- * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
- * the configuration information for the DMA2D.
- * @param LayerIdx: DMA2D Layer index.
- * This parameter can be one of the following values:
- * 0(background) / 1(foreground)
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx)
-{
- /* Check the parameters */
- assert_param(IS_DMA2D_LAYER(LayerIdx));
-
- if(LayerIdx == 0)
- {
- /* Enable the CLUT loading for the background */
- hdma2d->Instance->BGPFCCR |= DMA2D_BGPFCCR_START;
- }
- else
- {
- /* Enable the CLUT loading for the foreground */
- hdma2d->Instance->FGPFCCR |= DMA2D_FGPFCCR_START;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Disable the DMA2D CLUT Transfer.
- * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
- * the configuration information for the DMA2D.
- * @param LayerIdx: DMA2D Layer index.
- * This parameter can be one of the following values:
- * 0(background) / 1(foreground)
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMA2D_DisableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx)
-{
- /* Check the parameters */
- assert_param(IS_DMA2D_LAYER(LayerIdx));
-
- if(LayerIdx == 0)
- {
- /* Disable the CLUT loading for the background */
- hdma2d->Instance->BGPFCCR &= ~DMA2D_BGPFCCR_START;
- }
- else
- {
- /* Disable the CLUT loading for the foreground */
- hdma2d->Instance->FGPFCCR &= ~DMA2D_FGPFCCR_START;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Define the configuration of the line watermark .
- * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
- * the configuration information for the DMA2D.
- * @param Line: Line Watermark configuration.
- * @retval HAL status
- */
-
-HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line)
-{
- /* Process locked */
- __HAL_LOCK(hdma2d);
-
- /* Change DMA2D peripheral state */
- hdma2d->State = HAL_DMA2D_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_DMA2D_LineWatermark(Line));
-
- /* Sets the Line watermark configuration */
- DMA2D->LWR = (uint32_t)Line;
-
- /* Initialize the DMA2D state*/
- hdma2d->State = HAL_DMA2D_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hdma2d);
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup DMA2D_Group4 Peripheral State functions
- * @brief Peripheral State functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral State and Errors functions #####
- ===============================================================================
- [..]
- This subsection provides functions allowing to :
- (+) Check the DMA2D state
- (+) Get error code
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Return the DMA2D state
- * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
- * the configuration information for the DMA2D.
- * @retval HAL state
- */
-HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d)
-{
- return hdma2d->State;
-}
-
-/**
- * @brief Return the DMA2D error code
- * @param hdma2d : pointer to a DMA2D_HandleTypeDef structure that contains
- * the configuration information for DMA2D.
- * @retval DMA2D Error Code
- */
-uint32_t HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d)
-{
- return hdma2d->ErrorCode;
-}
-
-/**
- * @}
- */
-
-
-/**
- * @brief Set the DMA2D Transfer parameter.
- * @param hdma2d: pointer to a DMA2D_HandleTypeDef structure that contains
- * the configuration information for the specified DMA2D.
- * @param pdata: The source memory Buffer address
- * @param DstAddress: The destination memory Buffer address
- * @param Width: The width of data to be transferred from source to destination.
- * @param Height: The height of data to be transferred from source to destination.
- * @retval HAL status
- */
-static void DMA2D_SetConfig(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height)
-{
- uint32_t tmp = 0;
- uint32_t tmp1 = 0;
- uint32_t tmp2 = 0;
- uint32_t tmp3 = 0;
- uint32_t tmp4 = 0;
-
- tmp = Width << 16;
-
- /* Configure DMA2D data size */
- hdma2d->Instance->NLR = (Height | tmp);
-
- /* Configure DMA2D destination address */
- hdma2d->Instance->OMAR = DstAddress;
-
- /* Register to memory DMA2D mode selected */
- if (hdma2d->Init.Mode == DMA2D_R2M)
- {
- tmp1 = pdata & DMA2D_OCOLR_ALPHA_1;
- tmp2 = pdata & DMA2D_OCOLR_RED_1;
- tmp3 = pdata & DMA2D_OCOLR_GREEN_1;
- tmp4 = pdata & DMA2D_OCOLR_BLUE_1;
-
- /* Prepare the value to be wrote to the OCOLR register according to the color mode */
- if (hdma2d->Init.ColorMode == DMA2D_ARGB8888)
- {
- tmp = (tmp3 | tmp2 | tmp1| tmp4);
- }
- else if (hdma2d->Init.ColorMode == DMA2D_RGB888)
- {
- tmp = (tmp3 | tmp2 | tmp4);
- }
- else if (hdma2d->Init.ColorMode == DMA2D_RGB565)
- {
- tmp2 = (tmp2 >> 19);
- tmp3 = (tmp3 >> 10);
- tmp4 = (tmp4 >> 3 );
- tmp = ((tmp3 << 5) | (tmp2 << 11) | tmp4);
- }
- else if (hdma2d->Init.ColorMode == DMA2D_ARGB1555)
- {
- tmp1 = (tmp1 >> 31);
- tmp2 = (tmp2 >> 19);
- tmp3 = (tmp3 >> 11);
- tmp4 = (tmp4 >> 3 );
- tmp = ((tmp3 << 5) | (tmp2 << 10) | (tmp1 << 15) | tmp4);
- }
- else /* DMA2D_CMode = DMA2D_ARGB4444 */
- {
- tmp1 = (tmp1 >> 28);
- tmp2 = (tmp2 >> 20);
- tmp3 = (tmp3 >> 12);
- tmp4 = (tmp4 >> 4 );
- tmp = ((tmp3 << 4) | (tmp2 << 8) | (tmp1 << 12) | tmp4);
- }
- /* Write to DMA2D OCOLR register */
- hdma2d->Instance->OCOLR = tmp;
- }
- else /* M2M, M2M_PFC or M2M_Blending DMA2D Mode */
- {
- /* Configure DMA2D source address */
- hdma2d->Instance->FGMAR = pdata;
- }
-}
-
-/**
- * @}
- */
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-#endif /* HAL_DMA2D_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c
deleted file mode 100644
index 923883e..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_dma_ex.c
+++ /dev/null
@@ -1,307 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_dma_ex.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief DMA Extension HAL module driver
- * This file provides firmware functions to manage the following
- * functionalities of the DMA Extension peripheral:
- * + Extended features functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- The DMA Extension HAL driver can be used as follows:
- (#) Start a multi buffer transfer using the HAL_DMA_MultiBufferStart() function
- for polling mode or HAL_DMA_MultiBufferStart_IT() for interrupt mode.
-
- -@- In Memory-to-Memory transfer mode, Multi (Double) Buffer mode is not allowed.
- -@- When Multi (Double) Buffer mode is enabled the, transfer is circular by default.
- -@- In Multi (Double) buffer mode, it is possible to update the base address for
- the AHB memory port on the fly (DMA_SxM0AR or DMA_SxM1AR) when the stream is enabled.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup DMAEx DMAEx
- * @brief DMA Extended HAL module driver
- * @{
- */
-
-#ifdef HAL_DMA_MODULE_ENABLED
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private Constants ---------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/** @addtogroup DMAEx_Private_Functions
- * @{
- */
-static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength);
-/**
- * @}
- */
-
-/* Exported functions ---------------------------------------------------------*/
-
-/** @addtogroup DMAEx_Exported_Functions
- * @{
- */
-
-
-/** @addtogroup DMAEx_Exported_Functions_Group1
- *
-@verbatim
- ===============================================================================
- ##### Extended features functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Configure the source, destination address and data length and
- Start MultiBuffer DMA transfer
- (+) Configure the source, destination address and data length and
- Start MultiBuffer DMA transfer with interrupt
- (+) Change on the fly the memory0 or memory1 address.
-
-@endverbatim
- * @{
- */
-
-
-/**
- * @brief Starts the multi_buffer DMA Transfer.
- * @param hdma : pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Stream.
- * @param SrcAddress: The source memory Buffer address
- * @param DstAddress: The destination memory Buffer address
- * @param SecondMemAddress: The second memory Buffer address in case of multi buffer Transfer
- * @param DataLength: The length of data to be transferred from source to destination
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
-{
- /* Process Locked */
- __HAL_LOCK(hdma);
-
- /* Current memory buffer used is Memory 0 */
- if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
- {
- hdma->State = HAL_DMA_STATE_BUSY_MEM0;
- }
- /* Current memory buffer used is Memory 1 */
- else if((hdma->Instance->CR & DMA_SxCR_CT) != 0)
- {
- hdma->State = HAL_DMA_STATE_BUSY_MEM1;
- }
-
- /* Check the parameters */
- assert_param(IS_DMA_BUFFER_SIZE(DataLength));
-
- /* Disable the peripheral */
- __HAL_DMA_DISABLE(hdma);
-
- /* Enable the double buffer mode */
- hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
-
- /* Configure DMA Stream destination address */
- hdma->Instance->M1AR = SecondMemAddress;
-
- /* Configure the source, destination address and the data length */
- DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
-
- /* Enable the peripheral */
- __HAL_DMA_ENABLE(hdma);
-
- return HAL_OK;
-}
-
-/**
- * @brief Starts the multi_buffer DMA Transfer with interrupt enabled.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Stream.
- * @param SrcAddress: The source memory Buffer address
- * @param DstAddress: The destination memory Buffer address
- * @param SecondMemAddress: The second memory Buffer address in case of multi buffer Transfer
- * @param DataLength: The length of data to be transferred from source to destination
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength)
-{
- /* Process Locked */
- __HAL_LOCK(hdma);
-
- /* Current memory buffer used is Memory 0 */
- if((hdma->Instance->CR & DMA_SxCR_CT) == 0)
- {
- hdma->State = HAL_DMA_STATE_BUSY_MEM0;
- }
- /* Current memory buffer used is Memory 1 */
- else if((hdma->Instance->CR & DMA_SxCR_CT) != 0)
- {
- hdma->State = HAL_DMA_STATE_BUSY_MEM1;
- }
-
- /* Check the parameters */
- assert_param(IS_DMA_BUFFER_SIZE(DataLength));
-
- /* Disable the peripheral */
- __HAL_DMA_DISABLE(hdma);
-
- /* Enable the Double buffer mode */
- hdma->Instance->CR |= (uint32_t)DMA_SxCR_DBM;
-
- /* Configure DMA Stream destination address */
- hdma->Instance->M1AR = SecondMemAddress;
-
- /* Configure the source, destination address and the data length */
- DMA_MultiBufferSetConfig(hdma, SrcAddress, DstAddress, DataLength);
-
- /* Enable the transfer complete interrupt */
- __HAL_DMA_ENABLE_IT(hdma, DMA_IT_TC);
-
- /* Enable the Half transfer interrupt */
- __HAL_DMA_ENABLE_IT(hdma, DMA_IT_HT);
-
- /* Enable the transfer Error interrupt */
- __HAL_DMA_ENABLE_IT(hdma, DMA_IT_TE);
-
- /* Enable the fifo Error interrupt */
- __HAL_DMA_ENABLE_IT(hdma, DMA_IT_FE);
-
- /* Enable the direct mode Error interrupt */
- __HAL_DMA_ENABLE_IT(hdma, DMA_IT_DME);
-
- /* Enable the peripheral */
- __HAL_DMA_ENABLE(hdma);
-
- return HAL_OK;
-}
-
-/**
- * @brief Change the memory0 or memory1 address on the fly.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Stream.
- * @param Address: The new address
- * @param memory: the memory to be changed, This parameter can be one of
- * the following values:
- * MEMORY0 /
- * MEMORY1
- * @note The MEMORY0 address can be changed only when the current transfer use
- * MEMORY1 and the MEMORY1 address can be changed only when the current
- * transfer use MEMORY0.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory)
-{
- if(memory == MEMORY0)
- {
- /* change the memory0 address */
- hdma->Instance->M0AR = Address;
- }
- else
- {
- /* change the memory1 address */
- hdma->Instance->M1AR = Address;
- }
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @addtogroup DMAEx_Private_Functions
- * @{
- */
-
-/**
- * @brief Set the DMA Transfer parameter.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA Stream.
- * @param SrcAddress: The source memory Buffer address
- * @param DstAddress: The destination memory Buffer address
- * @param DataLength: The length of data to be transferred from source to destination
- * @retval HAL status
- */
-static void DMA_MultiBufferSetConfig(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength)
-{
- /* Configure DMA Stream data length */
- hdma->Instance->NDTR = DataLength;
-
- /* Peripheral to Memory */
- if((hdma->Init.Direction) == DMA_MEMORY_TO_PERIPH)
- {
- /* Configure DMA Stream destination address */
- hdma->Instance->PAR = DstAddress;
-
- /* Configure DMA Stream source address */
- hdma->Instance->M0AR = SrcAddress;
- }
- /* Memory to Peripheral */
- else
- {
- /* Configure DMA Stream source address */
- hdma->Instance->PAR = SrcAddress;
-
- /* Configure DMA Stream destination address */
- hdma->Instance->M0AR = DstAddress;
- }
-}
-
-/**
- * @}
- */
-
-#endif /* HAL_DMA_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_eth.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_eth.c
deleted file mode 100644
index 686e3e7..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_eth.c
+++ /dev/null
@@ -1,2017 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_eth.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief ETH HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Ethernet (ETH) peripheral:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral Control functions
- * + Peripheral State and Errors functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (#)Declare a ETH_HandleTypeDef handle structure, for example:
- ETH_HandleTypeDef heth;
-
- (#)Fill parameters of Init structure in heth handle
-
- (#)Call HAL_ETH_Init() API to initialize the Ethernet peripheral (MAC, DMA, ...)
-
- (#)Initialize the ETH low level resources through the HAL_ETH_MspInit() API:
- (##) Enable the Ethernet interface clock using
- (+++) __HAL_RCC_ETHMAC_CLK_ENABLE();
- (+++) __HAL_RCC_ETHMACTX_CLK_ENABLE();
- (+++) __HAL_RCC_ETHMACRX_CLK_ENABLE();
-
- (##) Initialize the related GPIO clocks
- (##) Configure Ethernet pin-out
- (##) Configure Ethernet NVIC interrupt (IT mode)
-
- (#)Initialize Ethernet DMA Descriptors in chain mode and point to allocated buffers:
- (##) HAL_ETH_DMATxDescListInit(); for Transmission process
- (##) HAL_ETH_DMARxDescListInit(); for Reception process
-
- (#)Enable MAC and DMA transmission and reception:
- (##) HAL_ETH_Start();
-
- (#)Prepare ETH DMA TX Descriptors and give the hand to ETH DMA to transfer
- the frame to MAC TX FIFO:
- (##) HAL_ETH_TransmitFrame();
-
- (#)Poll for a received frame in ETH RX DMA Descriptors and get received
- frame parameters
- (##) HAL_ETH_GetReceivedFrame(); (should be called into an infinite loop)
-
- (#) Get a received frame when an ETH RX interrupt occurs:
- (##) HAL_ETH_GetReceivedFrame_IT(); (called in IT mode only)
-
- (#) Communicate with external PHY device:
- (##) Read a specific register from the PHY
- HAL_ETH_ReadPHYRegister();
- (##) Write data to a specific RHY register:
- HAL_ETH_WritePHYRegister();
-
- (#) Configure the Ethernet MAC after ETH peripheral initialization
- HAL_ETH_ConfigMAC(); all MAC parameters should be filled.
-
- (#) Configure the Ethernet DMA after ETH peripheral initialization
- HAL_ETH_ConfigDMA(); all DMA parameters should be filled.
-
- -@- The PTP protocol and the DMA descriptors ring mode are not supported
- in this driver
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup ETH ETH
- * @brief ETH HAL module driver
- * @{
- */
-
-#ifdef HAL_ETH_MODULE_ENABLED
-
-#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @defgroup ETH_Private_Constants ETH Private Constants
- * @{
- */
-#define LINKED_STATE_TIMEOUT_VALUE ((uint32_t)2000) /* 2000 ms */
-#define AUTONEGO_COMPLETED_TIMEOUT_VALUE ((uint32_t)1000) /* 1000 ms */
-
-/**
- * @}
- */
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @defgroup ETH_Private_Functions ETH Private Functions
- * @{
- */
-static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth, uint32_t err);
-static void ETH_MACAddressConfig(ETH_HandleTypeDef *heth, uint32_t MacAddr, uint8_t *Addr);
-static void ETH_MACReceptionEnable(ETH_HandleTypeDef *heth);
-static void ETH_MACReceptionDisable(ETH_HandleTypeDef *heth);
-static void ETH_MACTransmissionEnable(ETH_HandleTypeDef *heth);
-static void ETH_MACTransmissionDisable(ETH_HandleTypeDef *heth);
-static void ETH_DMATransmissionEnable(ETH_HandleTypeDef *heth);
-static void ETH_DMATransmissionDisable(ETH_HandleTypeDef *heth);
-static void ETH_DMAReceptionEnable(ETH_HandleTypeDef *heth);
-static void ETH_DMAReceptionDisable(ETH_HandleTypeDef *heth);
-static void ETH_FlushTransmitFIFO(ETH_HandleTypeDef *heth);
-
-/**
- * @}
- */
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup ETH_Exported_Functions ETH Exported Functions
- * @{
- */
-
-/** @defgroup ETH_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
- @verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Initialize and configure the Ethernet peripheral
- (+) De-initialize the Ethernet peripheral
-
- @endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the Ethernet MAC and DMA according to default
- * parameters.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth)
-{
- uint32_t tmpreg1 = 0, phyreg = 0;
- uint32_t hclk = 60000000;
- uint32_t tickstart = 0;
- uint32_t err = ETH_SUCCESS;
-
- /* Check the ETH peripheral state */
- if(heth == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check parameters */
- assert_param(IS_ETH_AUTONEGOTIATION(heth->Init.AutoNegotiation));
- assert_param(IS_ETH_RX_MODE(heth->Init.RxMode));
- assert_param(IS_ETH_CHECKSUM_MODE(heth->Init.ChecksumMode));
- assert_param(IS_ETH_MEDIA_INTERFACE(heth->Init.MediaInterface));
-
- if(heth->State == HAL_ETH_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- heth->Lock = HAL_UNLOCKED;
- /* Init the low level hardware : GPIO, CLOCK, NVIC. */
- HAL_ETH_MspInit(heth);
- }
-
- /* Enable SYSCFG Clock */
- __HAL_RCC_SYSCFG_CLK_ENABLE();
-
- /* Select MII or RMII Mode*/
- SYSCFG->PMC &= ~(SYSCFG_PMC_MII_RMII_SEL);
- SYSCFG->PMC |= (uint32_t)heth->Init.MediaInterface;
-
- /* Ethernet Software reset */
- /* Set the SWR bit: resets all MAC subsystem internal registers and logic */
- /* After reset all the registers holds their respective reset values */
- (heth->Instance)->DMABMR |= ETH_DMABMR_SR;
-
- /* Wait for software reset */
- while (((heth->Instance)->DMABMR & ETH_DMABMR_SR) != (uint32_t)RESET)
- {
- }
-
- /*-------------------------------- MAC Initialization ----------------------*/
- /* Get the ETHERNET MACMIIAR value */
- tmpreg1 = (heth->Instance)->MACMIIAR;
- /* Clear CSR Clock Range CR[2:0] bits */
- tmpreg1 &= ETH_MACMIIAR_CR_MASK;
-
- /* Get hclk frequency value */
- hclk = HAL_RCC_GetHCLKFreq();
-
- /* Set CR bits depending on hclk value */
- if((hclk >= 20000000)&&(hclk < 35000000))
- {
- /* CSR Clock Range between 20-35 MHz */
- tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_Div16;
- }
- else if((hclk >= 35000000)&&(hclk < 60000000))
- {
- /* CSR Clock Range between 35-60 MHz */
- tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_Div26;
- }
- else if((hclk >= 60000000)&&(hclk < 100000000))
- {
- /* CSR Clock Range between 60-100 MHz */
- tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_Div42;
- }
- else if((hclk >= 100000000)&&(hclk < 150000000))
- {
- /* CSR Clock Range between 100-150 MHz */
- tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_Div62;
- }
- else /* ((hclk >= 150000000)&&(hclk <= 168000000)) */
- {
- /* CSR Clock Range between 150-168 MHz */
- tmpreg1 |= (uint32_t)ETH_MACMIIAR_CR_Div102;
- }
-
- /* Write to ETHERNET MAC MIIAR: Configure the ETHERNET CSR Clock Range */
- (heth->Instance)->MACMIIAR = (uint32_t)tmpreg1;
-
- /*-------------------- PHY initialization and configuration ----------------*/
- /* Put the PHY in reset mode */
- if((HAL_ETH_WritePHYRegister(heth, PHY_BCR, PHY_RESET)) != HAL_OK)
- {
- /* In case of write timeout */
- err = ETH_ERROR;
-
- /* Config MAC and DMA */
- ETH_MACDMAConfig(heth, err);
-
- /* Set the ETH peripheral state to READY */
- heth->State = HAL_ETH_STATE_READY;
-
- /* Return HAL_ERROR */
- return HAL_ERROR;
- }
-
- /* Delay to assure PHY reset */
- HAL_Delay(PHY_RESET_DELAY);
-
- if((heth->Init).AutoNegotiation != ETH_AUTONEGOTIATION_DISABLE)
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* We wait for linked status */
- do
- {
- HAL_ETH_ReadPHYRegister(heth, PHY_BSR, &phyreg);
-
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > LINKED_STATE_TIMEOUT_VALUE)
- {
- /* In case of write timeout */
- err = ETH_ERROR;
-
- /* Config MAC and DMA */
- ETH_MACDMAConfig(heth, err);
-
- heth->State= HAL_ETH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(heth);
-
- return HAL_TIMEOUT;
- }
- } while (((phyreg & PHY_LINKED_STATUS) != PHY_LINKED_STATUS));
-
-
- /* Enable Auto-Negotiation */
- if((HAL_ETH_WritePHYRegister(heth, PHY_BCR, PHY_AUTONEGOTIATION)) != HAL_OK)
- {
- /* In case of write timeout */
- err = ETH_ERROR;
-
- /* Config MAC and DMA */
- ETH_MACDMAConfig(heth, err);
-
- /* Set the ETH peripheral state to READY */
- heth->State = HAL_ETH_STATE_READY;
-
- /* Return HAL_ERROR */
- return HAL_ERROR;
- }
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait until the auto-negotiation will be completed */
- do
- {
- HAL_ETH_ReadPHYRegister(heth, PHY_BSR, &phyreg);
-
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > AUTONEGO_COMPLETED_TIMEOUT_VALUE)
- {
- /* In case of write timeout */
- err = ETH_ERROR;
-
- /* Config MAC and DMA */
- ETH_MACDMAConfig(heth, err);
-
- heth->State= HAL_ETH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(heth);
-
- return HAL_TIMEOUT;
- }
-
- } while (((phyreg & PHY_AUTONEGO_COMPLETE) != PHY_AUTONEGO_COMPLETE));
-
- /* Read the result of the auto-negotiation */
- if((HAL_ETH_ReadPHYRegister(heth, PHY_SR, &phyreg)) != HAL_OK)
- {
- /* In case of write timeout */
- err = ETH_ERROR;
-
- /* Config MAC and DMA */
- ETH_MACDMAConfig(heth, err);
-
- /* Set the ETH peripheral state to READY */
- heth->State = HAL_ETH_STATE_READY;
-
- /* Return HAL_ERROR */
- return HAL_ERROR;
- }
-
- /* Configure the MAC with the Duplex Mode fixed by the auto-negotiation process */
- if((phyreg & PHY_DUPLEX_STATUS) != (uint32_t)RESET)
- {
- /* Set Ethernet duplex mode to Full-duplex following the auto-negotiation */
- (heth->Init).DuplexMode = ETH_MODE_FULLDUPLEX;
- }
- else
- {
- /* Set Ethernet duplex mode to Half-duplex following the auto-negotiation */
- (heth->Init).DuplexMode = ETH_MODE_HALFDUPLEX;
- }
- /* Configure the MAC with the speed fixed by the auto-negotiation process */
- if((phyreg & PHY_SPEED_STATUS) == PHY_SPEED_STATUS)
- {
- /* Set Ethernet speed to 10M following the auto-negotiation */
- (heth->Init).Speed = ETH_SPEED_10M;
- }
- else
- {
- /* Set Ethernet speed to 100M following the auto-negotiation */
- (heth->Init).Speed = ETH_SPEED_100M;
- }
- }
- else /* AutoNegotiation Disable */
- {
- /* Check parameters */
- assert_param(IS_ETH_SPEED(heth->Init.Speed));
- assert_param(IS_ETH_DUPLEX_MODE(heth->Init.DuplexMode));
-
- /* Set MAC Speed and Duplex Mode */
- if(HAL_ETH_WritePHYRegister(heth, PHY_BCR, ((uint16_t)((heth->Init).DuplexMode >> 3) |
- (uint16_t)((heth->Init).Speed >> 1))) != HAL_OK)
- {
- /* In case of write timeout */
- err = ETH_ERROR;
-
- /* Config MAC and DMA */
- ETH_MACDMAConfig(heth, err);
-
- /* Set the ETH peripheral state to READY */
- heth->State = HAL_ETH_STATE_READY;
-
- /* Return HAL_ERROR */
- return HAL_ERROR;
- }
-
- /* Delay to assure PHY configuration */
- HAL_Delay(PHY_CONFIG_DELAY);
- }
-
- /* Config MAC and DMA */
- ETH_MACDMAConfig(heth, err);
-
- /* Set ETH HAL State to Ready */
- heth->State= HAL_ETH_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief De-Initializes the ETH peripheral.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth)
-{
- /* Set the ETH peripheral state to BUSY */
- heth->State = HAL_ETH_STATE_BUSY;
-
- /* De-Init the low level hardware : GPIO, CLOCK, NVIC. */
- HAL_ETH_MspDeInit(heth);
-
- /* Set ETH HAL state to Disabled */
- heth->State= HAL_ETH_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(heth);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the DMA Tx descriptors in chain mode.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @param DMATxDescTab: Pointer to the first Tx desc list
- * @param TxBuff: Pointer to the first TxBuffer list
- * @param TxBuffCount: Number of the used Tx desc in the list
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ETH_DMATxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMATxDescTab, uint8_t *TxBuff, uint32_t TxBuffCount)
-{
- uint32_t i = 0;
- ETH_DMADescTypeDef *dmatxdesc;
-
- /* Process Locked */
- __HAL_LOCK(heth);
-
- /* Set the ETH peripheral state to BUSY */
- heth->State = HAL_ETH_STATE_BUSY;
-
- /* Set the DMATxDescToSet pointer with the first one of the DMATxDescTab list */
- heth->TxDesc = DMATxDescTab;
-
- /* Fill each DMATxDesc descriptor with the right values */
- for(i=0; i < TxBuffCount; i++)
- {
- /* Get the pointer on the ith member of the Tx Desc list */
- dmatxdesc = DMATxDescTab + i;
-
- /* Set Second Address Chained bit */
- dmatxdesc->Status = ETH_DMATXDESC_TCH;
-
- /* Set Buffer1 address pointer */
- dmatxdesc->Buffer1Addr = (uint32_t)(&TxBuff[i*ETH_TX_BUF_SIZE]);
-
- if ((heth->Init).ChecksumMode == ETH_CHECKSUM_BY_HARDWARE)
- {
- /* Set the DMA Tx descriptors checksum insertion */
- dmatxdesc->Status |= ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL;
- }
-
- /* Initialize the next descriptor with the Next Descriptor Polling Enable */
- if(i < (TxBuffCount-1))
- {
- /* Set next descriptor address register with next descriptor base address */
- dmatxdesc->Buffer2NextDescAddr = (uint32_t)(DMATxDescTab+i+1);
- }
- else
- {
- /* For last descriptor, set next descriptor address register equal to the first descriptor base address */
- dmatxdesc->Buffer2NextDescAddr = (uint32_t) DMATxDescTab;
- }
- }
-
- /* Set Transmit Descriptor List Address Register */
- (heth->Instance)->DMATDLAR = (uint32_t) DMATxDescTab;
-
- /* Set ETH HAL State to Ready */
- heth->State= HAL_ETH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(heth);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the DMA Rx descriptors in chain mode.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @param DMARxDescTab: Pointer to the first Rx desc list
- * @param RxBuff: Pointer to the first RxBuffer list
- * @param RxBuffCount: Number of the used Rx desc in the list
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ETH_DMARxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMARxDescTab, uint8_t *RxBuff, uint32_t RxBuffCount)
-{
- uint32_t i = 0;
- ETH_DMADescTypeDef *DMARxDesc;
-
- /* Process Locked */
- __HAL_LOCK(heth);
-
- /* Set the ETH peripheral state to BUSY */
- heth->State = HAL_ETH_STATE_BUSY;
-
- /* Set the Ethernet RxDesc pointer with the first one of the DMARxDescTab list */
- heth->RxDesc = DMARxDescTab;
-
- /* Fill each DMARxDesc descriptor with the right values */
- for(i=0; i < RxBuffCount; i++)
- {
- /* Get the pointer on the ith member of the Rx Desc list */
- DMARxDesc = DMARxDescTab+i;
-
- /* Set Own bit of the Rx descriptor Status */
- DMARxDesc->Status = ETH_DMARXDESC_OWN;
-
- /* Set Buffer1 size and Second Address Chained bit */
- DMARxDesc->ControlBufferSize = ETH_DMARXDESC_RCH | ETH_RX_BUF_SIZE;
-
- /* Set Buffer1 address pointer */
- DMARxDesc->Buffer1Addr = (uint32_t)(&RxBuff[i*ETH_RX_BUF_SIZE]);
-
- if((heth->Init).RxMode == ETH_RXINTERRUPT_MODE)
- {
- /* Enable Ethernet DMA Rx Descriptor interrupt */
- DMARxDesc->ControlBufferSize &= ~ETH_DMARXDESC_DIC;
- }
-
- /* Initialize the next descriptor with the Next Descriptor Polling Enable */
- if(i < (RxBuffCount-1))
- {
- /* Set next descriptor address register with next descriptor base address */
- DMARxDesc->Buffer2NextDescAddr = (uint32_t)(DMARxDescTab+i+1);
- }
- else
- {
- /* For last descriptor, set next descriptor address register equal to the first descriptor base address */
- DMARxDesc->Buffer2NextDescAddr = (uint32_t)(DMARxDescTab);
- }
- }
-
- /* Set Receive Descriptor List Address Register */
- (heth->Instance)->DMARDLAR = (uint32_t) DMARxDescTab;
-
- /* Set ETH HAL State to Ready */
- heth->State= HAL_ETH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(heth);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the ETH MSP.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval None
- */
-__weak void HAL_ETH_MspInit(ETH_HandleTypeDef *heth)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_ETH_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes ETH MSP.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval None
- */
-__weak void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_ETH_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup ETH_Exported_Functions_Group2 IO operation functions
- * @brief Data transfers functions
- *
- @verbatim
- ==============================================================================
- ##### IO operation functions #####
- ==============================================================================
- [..] This section provides functions allowing to:
- (+) Transmit a frame
- HAL_ETH_TransmitFrame();
- (+) Receive a frame
- HAL_ETH_GetReceivedFrame();
- HAL_ETH_GetReceivedFrame_IT();
- (+) Read from an External PHY register
- HAL_ETH_ReadPHYRegister();
- (+) Write to an External PHY register
- HAL_ETH_WritePHYRegister();
-
- @endverbatim
-
- * @{
- */
-
-/**
- * @brief Sends an Ethernet frame.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @param FrameLength: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ETH_TransmitFrame(ETH_HandleTypeDef *heth, uint32_t FrameLength)
-{
- uint32_t bufcount = 0, size = 0, i = 0;
-
- /* Process Locked */
- __HAL_LOCK(heth);
-
- /* Set the ETH peripheral state to BUSY */
- heth->State = HAL_ETH_STATE_BUSY;
-
- if (FrameLength == 0)
- {
- /* Set ETH HAL state to READY */
- heth->State = HAL_ETH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(heth);
-
- return HAL_ERROR;
- }
-
- /* Check if the descriptor is owned by the ETHERNET DMA (when set) or CPU (when reset) */
- if(((heth->TxDesc)->Status & ETH_DMATXDESC_OWN) != (uint32_t)RESET)
- {
- /* OWN bit set */
- heth->State = HAL_ETH_STATE_BUSY_TX;
-
- /* Process Unlocked */
- __HAL_UNLOCK(heth);
-
- return HAL_ERROR;
- }
-
- /* Get the number of needed Tx buffers for the current frame */
- if (FrameLength > ETH_TX_BUF_SIZE)
- {
- bufcount = FrameLength/ETH_TX_BUF_SIZE;
- if (FrameLength % ETH_TX_BUF_SIZE)
- {
- bufcount++;
- }
- }
- else
- {
- bufcount = 1;
- }
- if (bufcount == 1)
- {
- /* Set LAST and FIRST segment */
- heth->TxDesc->Status |=ETH_DMATXDESC_FS|ETH_DMATXDESC_LS;
- /* Set frame size */
- heth->TxDesc->ControlBufferSize = (FrameLength & ETH_DMATXDESC_TBS1);
- /* Set Own bit of the Tx descriptor Status: gives the buffer back to ETHERNET DMA */
- heth->TxDesc->Status |= ETH_DMATXDESC_OWN;
- /* Point to next descriptor */
- heth->TxDesc= (ETH_DMADescTypeDef *)(heth->TxDesc->Buffer2NextDescAddr);
- }
- else
- {
- for (i=0; i< bufcount; i++)
- {
- /* Clear FIRST and LAST segment bits */
- heth->TxDesc->Status &= ~(ETH_DMATXDESC_FS | ETH_DMATXDESC_LS);
-
- if (i == 0)
- {
- /* Setting the first segment bit */
- heth->TxDesc->Status |= ETH_DMATXDESC_FS;
- }
-
- /* Program size */
- heth->TxDesc->ControlBufferSize = (ETH_TX_BUF_SIZE & ETH_DMATXDESC_TBS1);
-
- if (i == (bufcount-1))
- {
- /* Setting the last segment bit */
- heth->TxDesc->Status |= ETH_DMATXDESC_LS;
- size = FrameLength - (bufcount-1)*ETH_TX_BUF_SIZE;
- heth->TxDesc->ControlBufferSize = (size & ETH_DMATXDESC_TBS1);
- }
-
- /* Set Own bit of the Tx descriptor Status: gives the buffer back to ETHERNET DMA */
- heth->TxDesc->Status |= ETH_DMATXDESC_OWN;
- /* point to next descriptor */
- heth->TxDesc = (ETH_DMADescTypeDef *)(heth->TxDesc->Buffer2NextDescAddr);
- }
- }
-
- /* When Tx Buffer unavailable flag is set: clear it and resume transmission */
- if (((heth->Instance)->DMASR & ETH_DMASR_TBUS) != (uint32_t)RESET)
- {
- /* Clear TBUS ETHERNET DMA flag */
- (heth->Instance)->DMASR = ETH_DMASR_TBUS;
- /* Resume DMA transmission*/
- (heth->Instance)->DMATPDR = 0;
- }
-
- /* Set ETH HAL State to Ready */
- heth->State = HAL_ETH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(heth);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Checks for received frames.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ETH_GetReceivedFrame(ETH_HandleTypeDef *heth)
-{
- uint32_t framelength = 0;
-
- /* Process Locked */
- __HAL_LOCK(heth);
-
- /* Check the ETH state to BUSY */
- heth->State = HAL_ETH_STATE_BUSY;
-
- /* Check if segment is not owned by DMA */
- /* (((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET) && ((heth->RxDesc->Status & ETH_DMARXDESC_LS) != (uint32_t)RESET)) */
- if(((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET))
- {
- /* Check if last segment */
- if(((heth->RxDesc->Status & ETH_DMARXDESC_LS) != (uint32_t)RESET))
- {
- /* increment segment count */
- (heth->RxFrameInfos).SegCount++;
-
- /* Check if last segment is first segment: one segment contains the frame */
- if ((heth->RxFrameInfos).SegCount == 1)
- {
- (heth->RxFrameInfos).FSRxDesc =heth->RxDesc;
- }
-
- heth->RxFrameInfos.LSRxDesc = heth->RxDesc;
-
- /* Get the Frame Length of the received packet: substruct 4 bytes of the CRC */
- framelength = (((heth->RxDesc)->Status & ETH_DMARXDESC_FL) >> ETH_DMARXDESC_FRAMELENGTHSHIFT) - 4;
- heth->RxFrameInfos.length = framelength;
-
- /* Get the address of the buffer start address */
- heth->RxFrameInfos.buffer = ((heth->RxFrameInfos).FSRxDesc)->Buffer1Addr;
- /* point to next descriptor */
- heth->RxDesc = (ETH_DMADescTypeDef*) ((heth->RxDesc)->Buffer2NextDescAddr);
-
- /* Set HAL State to Ready */
- heth->State = HAL_ETH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(heth);
-
- /* Return function status */
- return HAL_OK;
- }
- /* Check if first segment */
- else if((heth->RxDesc->Status & ETH_DMARXDESC_FS) != (uint32_t)RESET)
- {
- (heth->RxFrameInfos).FSRxDesc = heth->RxDesc;
- (heth->RxFrameInfos).LSRxDesc = NULL;
- (heth->RxFrameInfos).SegCount = 1;
- /* Point to next descriptor */
- heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
- }
- /* Check if intermediate segment */
- else
- {
- (heth->RxFrameInfos).SegCount++;
- /* Point to next descriptor */
- heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
- }
- }
-
- /* Set ETH HAL State to Ready */
- heth->State = HAL_ETH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(heth);
-
- /* Return function status */
- return HAL_ERROR;
-}
-
-/**
- * @brief Gets the Received frame in interrupt mode.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ETH_GetReceivedFrame_IT(ETH_HandleTypeDef *heth)
-{
- uint32_t descriptorscancounter = 0;
-
- /* Process Locked */
- __HAL_LOCK(heth);
-
- /* Set ETH HAL State to BUSY */
- heth->State = HAL_ETH_STATE_BUSY;
-
- /* Scan descriptors owned by CPU */
- while (((heth->RxDesc->Status & ETH_DMARXDESC_OWN) == (uint32_t)RESET) && (descriptorscancounter < ETH_RXBUFNB))
- {
- /* Just for security */
- descriptorscancounter++;
-
- /* Check if first segment in frame */
- /* ((heth->RxDesc->Status & ETH_DMARXDESC_FS) != (uint32_t)RESET) && ((heth->RxDesc->Status & ETH_DMARXDESC_LS) == (uint32_t)RESET)) */
- if((heth->RxDesc->Status & (ETH_DMARXDESC_FS | ETH_DMARXDESC_LS)) == (uint32_t)ETH_DMARXDESC_FS)
- {
- heth->RxFrameInfos.FSRxDesc = heth->RxDesc;
- heth->RxFrameInfos.SegCount = 1;
- /* Point to next descriptor */
- heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
- }
- /* Check if intermediate segment */
- /* ((heth->RxDesc->Status & ETH_DMARXDESC_LS) == (uint32_t)RESET)&& ((heth->RxDesc->Status & ETH_DMARXDESC_FS) == (uint32_t)RESET)) */
- else if ((heth->RxDesc->Status & (ETH_DMARXDESC_LS | ETH_DMARXDESC_FS)) == (uint32_t)RESET)
- {
- /* Increment segment count */
- (heth->RxFrameInfos.SegCount)++;
- /* Point to next descriptor */
- heth->RxDesc = (ETH_DMADescTypeDef*)(heth->RxDesc->Buffer2NextDescAddr);
- }
- /* Should be last segment */
- else
- {
- /* Last segment */
- heth->RxFrameInfos.LSRxDesc = heth->RxDesc;
-
- /* Increment segment count */
- (heth->RxFrameInfos.SegCount)++;
-
- /* Check if last segment is first segment: one segment contains the frame */
- if ((heth->RxFrameInfos.SegCount) == 1)
- {
- heth->RxFrameInfos.FSRxDesc = heth->RxDesc;
- }
-
- /* Get the Frame Length of the received packet: substruct 4 bytes of the CRC */
- heth->RxFrameInfos.length = (((heth->RxDesc)->Status & ETH_DMARXDESC_FL) >> ETH_DMARXDESC_FRAMELENGTHSHIFT) - 4;
-
- /* Get the address of the buffer start address */
- heth->RxFrameInfos.buffer =((heth->RxFrameInfos).FSRxDesc)->Buffer1Addr;
-
- /* Point to next descriptor */
- heth->RxDesc = (ETH_DMADescTypeDef*) (heth->RxDesc->Buffer2NextDescAddr);
-
- /* Set HAL State to Ready */
- heth->State = HAL_ETH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(heth);
-
- /* Return function status */
- return HAL_OK;
- }
- }
-
- /* Set HAL State to Ready */
- heth->State = HAL_ETH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(heth);
-
- /* Return function status */
- return HAL_ERROR;
-}
-
-/**
- * @brief This function handles ETH interrupt request.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval HAL status
- */
-void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth)
-{
- /* Frame received */
- if (__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_R))
- {
- /* Receive complete callback */
- HAL_ETH_RxCpltCallback(heth);
-
- /* Clear the Eth DMA Rx IT pending bits */
- __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_R);
-
- /* Set HAL State to Ready */
- heth->State = HAL_ETH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(heth);
-
- }
- /* Frame transmitted */
- else if (__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_T))
- {
- /* Transfer complete callback */
- HAL_ETH_TxCpltCallback(heth);
-
- /* Clear the Eth DMA Tx IT pending bits */
- __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_T);
-
- /* Set HAL State to Ready */
- heth->State = HAL_ETH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(heth);
- }
-
- /* Clear the interrupt flags */
- __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_IT_NIS);
-
- /* ETH DMA Error */
- if(__HAL_ETH_DMA_GET_FLAG(heth, ETH_DMA_FLAG_AIS))
- {
- /* Ethernet Error callback */
- HAL_ETH_ErrorCallback(heth);
-
- /* Clear the interrupt flags */
- __HAL_ETH_DMA_CLEAR_IT(heth, ETH_DMA_FLAG_AIS);
-
- /* Set HAL State to Ready */
- heth->State = HAL_ETH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(heth);
- }
-}
-
-/**
- * @brief Tx Transfer completed callbacks.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval None
- */
-__weak void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_ETH_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Transfer completed callbacks.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval None
- */
-__weak void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_ETH_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Ethernet transfer error callbacks
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval None
- */
-__weak void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_ETH_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Reads a PHY register
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @param PHYReg: PHY register address, is the index of one of the 32 PHY register.
- * This parameter can be one of the following values:
- * PHY_BCR: Transceiver Basic Control Register,
- * PHY_BSR: Transceiver Basic Status Register.
- * More PHY register could be read depending on the used PHY
- * @param RegValue: PHY register value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t *RegValue)
-{
- uint32_t tmpreg1 = 0;
- uint32_t tickstart = 0;
-
- /* Check parameters */
- assert_param(IS_ETH_PHY_ADDRESS(heth->Init.PhyAddress));
-
- /* Check the ETH peripheral state */
- if(heth->State == HAL_ETH_STATE_BUSY_RD)
- {
- return HAL_BUSY;
- }
- /* Set ETH HAL State to BUSY_RD */
- heth->State = HAL_ETH_STATE_BUSY_RD;
-
- /* Get the ETHERNET MACMIIAR value */
- tmpreg1 = heth->Instance->MACMIIAR;
-
- /* Keep only the CSR Clock Range CR[2:0] bits value */
- tmpreg1 &= ~ETH_MACMIIAR_CR_MASK;
-
- /* Prepare the MII address register value */
- tmpreg1 |=(((uint32_t)heth->Init.PhyAddress << 11) & ETH_MACMIIAR_PA); /* Set the PHY device address */
- tmpreg1 |=(((uint32_t)PHYReg<<6) & ETH_MACMIIAR_MR); /* Set the PHY register address */
- tmpreg1 &= ~ETH_MACMIIAR_MW; /* Set the read mode */
- tmpreg1 |= ETH_MACMIIAR_MB; /* Set the MII Busy bit */
-
- /* Write the result value into the MII Address register */
- heth->Instance->MACMIIAR = tmpreg1;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Check for the Busy flag */
- while((tmpreg1 & ETH_MACMIIAR_MB) == ETH_MACMIIAR_MB)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > PHY_READ_TO)
- {
- heth->State= HAL_ETH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(heth);
-
- return HAL_TIMEOUT;
- }
-
- tmpreg1 = heth->Instance->MACMIIAR;
- }
-
- /* Get MACMIIDR value */
- *RegValue = (uint16_t)(heth->Instance->MACMIIDR);
-
- /* Set ETH HAL State to READY */
- heth->State = HAL_ETH_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Writes to a PHY register.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @param PHYReg: PHY register address, is the index of one of the 32 PHY register.
- * This parameter can be one of the following values:
- * PHY_BCR: Transceiver Control Register.
- * More PHY register could be written depending on the used PHY
- * @param RegValue: the value to write
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t RegValue)
-{
- uint32_t tmpreg1 = 0;
- uint32_t tickstart = 0;
-
- /* Check parameters */
- assert_param(IS_ETH_PHY_ADDRESS(heth->Init.PhyAddress));
-
- /* Check the ETH peripheral state */
- if(heth->State == HAL_ETH_STATE_BUSY_WR)
- {
- return HAL_BUSY;
- }
- /* Set ETH HAL State to BUSY_WR */
- heth->State = HAL_ETH_STATE_BUSY_WR;
-
- /* Get the ETHERNET MACMIIAR value */
- tmpreg1 = heth->Instance->MACMIIAR;
-
- /* Keep only the CSR Clock Range CR[2:0] bits value */
- tmpreg1 &= ~ETH_MACMIIAR_CR_MASK;
-
- /* Prepare the MII register address value */
- tmpreg1 |=(((uint32_t)heth->Init.PhyAddress<<11) & ETH_MACMIIAR_PA); /* Set the PHY device address */
- tmpreg1 |=(((uint32_t)PHYReg<<6) & ETH_MACMIIAR_MR); /* Set the PHY register address */
- tmpreg1 |= ETH_MACMIIAR_MW; /* Set the write mode */
- tmpreg1 |= ETH_MACMIIAR_MB; /* Set the MII Busy bit */
-
- /* Give the value to the MII data register */
- heth->Instance->MACMIIDR = (uint16_t)RegValue;
-
- /* Write the result value into the MII Address register */
- heth->Instance->MACMIIAR = tmpreg1;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Check for the Busy flag */
- while((tmpreg1 & ETH_MACMIIAR_MB) == ETH_MACMIIAR_MB)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > PHY_WRITE_TO)
- {
- heth->State= HAL_ETH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(heth);
-
- return HAL_TIMEOUT;
- }
-
- tmpreg1 = heth->Instance->MACMIIAR;
- }
-
- /* Set ETH HAL State to READY */
- heth->State = HAL_ETH_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup ETH_Exported_Functions_Group3 Peripheral Control functions
- * @brief Peripheral Control functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Control functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Enable MAC and DMA transmission and reception.
- HAL_ETH_Start();
- (+) Disable MAC and DMA transmission and reception.
- HAL_ETH_Stop();
- (+) Set the MAC configuration in runtime mode
- HAL_ETH_ConfigMAC();
- (+) Set the DMA configuration in runtime mode
- HAL_ETH_ConfigDMA();
-
-@endverbatim
- * @{
- */
-
- /**
- * @brief Enables Ethernet MAC and DMA reception/transmission
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth)
-{
- /* Process Locked */
- __HAL_LOCK(heth);
-
- /* Set the ETH peripheral state to BUSY */
- heth->State = HAL_ETH_STATE_BUSY;
-
- /* Enable transmit state machine of the MAC for transmission on the MII */
- ETH_MACTransmissionEnable(heth);
-
- /* Enable receive state machine of the MAC for reception from the MII */
- ETH_MACReceptionEnable(heth);
-
- /* Flush Transmit FIFO */
- ETH_FlushTransmitFIFO(heth);
-
- /* Start DMA transmission */
- ETH_DMATransmissionEnable(heth);
-
- /* Start DMA reception */
- ETH_DMAReceptionEnable(heth);
-
- /* Set the ETH state to READY*/
- heth->State= HAL_ETH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(heth);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stop Ethernet MAC and DMA reception/transmission
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth)
-{
- /* Process Locked */
- __HAL_LOCK(heth);
-
- /* Set the ETH peripheral state to BUSY */
- heth->State = HAL_ETH_STATE_BUSY;
-
- /* Stop DMA transmission */
- ETH_DMATransmissionDisable(heth);
-
- /* Stop DMA reception */
- ETH_DMAReceptionDisable(heth);
-
- /* Disable receive state machine of the MAC for reception from the MII */
- ETH_MACReceptionDisable(heth);
-
- /* Flush Transmit FIFO */
- ETH_FlushTransmitFIFO(heth);
-
- /* Disable transmit state machine of the MAC for transmission on the MII */
- ETH_MACTransmissionDisable(heth);
-
- /* Set the ETH state*/
- heth->State = HAL_ETH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(heth);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Set ETH MAC Configuration.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @param macconf: MAC Configuration structure
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ETH_ConfigMAC(ETH_HandleTypeDef *heth, ETH_MACInitTypeDef *macconf)
-{
- uint32_t tmpreg1 = 0;
-
- /* Process Locked */
- __HAL_LOCK(heth);
-
- /* Set the ETH peripheral state to BUSY */
- heth->State= HAL_ETH_STATE_BUSY;
-
- assert_param(IS_ETH_SPEED(heth->Init.Speed));
- assert_param(IS_ETH_DUPLEX_MODE(heth->Init.DuplexMode));
-
- if (macconf != NULL)
- {
- /* Check the parameters */
- assert_param(IS_ETH_WATCHDOG(macconf->Watchdog));
- assert_param(IS_ETH_JABBER(macconf->Jabber));
- assert_param(IS_ETH_INTER_FRAME_GAP(macconf->InterFrameGap));
- assert_param(IS_ETH_CARRIER_SENSE(macconf->CarrierSense));
- assert_param(IS_ETH_RECEIVE_OWN(macconf->ReceiveOwn));
- assert_param(IS_ETH_LOOPBACK_MODE(macconf->LoopbackMode));
- assert_param(IS_ETH_CHECKSUM_OFFLOAD(macconf->ChecksumOffload));
- assert_param(IS_ETH_RETRY_TRANSMISSION(macconf->RetryTransmission));
- assert_param(IS_ETH_AUTOMATIC_PADCRC_STRIP(macconf->AutomaticPadCRCStrip));
- assert_param(IS_ETH_BACKOFF_LIMIT(macconf->BackOffLimit));
- assert_param(IS_ETH_DEFERRAL_CHECK(macconf->DeferralCheck));
- assert_param(IS_ETH_RECEIVE_ALL(macconf->ReceiveAll));
- assert_param(IS_ETH_SOURCE_ADDR_FILTER(macconf->SourceAddrFilter));
- assert_param(IS_ETH_CONTROL_FRAMES(macconf->PassControlFrames));
- assert_param(IS_ETH_BROADCAST_FRAMES_RECEPTION(macconf->BroadcastFramesReception));
- assert_param(IS_ETH_DESTINATION_ADDR_FILTER(macconf->DestinationAddrFilter));
- assert_param(IS_ETH_PROMISCUOUS_MODE(macconf->PromiscuousMode));
- assert_param(IS_ETH_MULTICAST_FRAMES_FILTER(macconf->MulticastFramesFilter));
- assert_param(IS_ETH_UNICAST_FRAMES_FILTER(macconf->UnicastFramesFilter));
- assert_param(IS_ETH_PAUSE_TIME(macconf->PauseTime));
- assert_param(IS_ETH_ZEROQUANTA_PAUSE(macconf->ZeroQuantaPause));
- assert_param(IS_ETH_PAUSE_LOW_THRESHOLD(macconf->PauseLowThreshold));
- assert_param(IS_ETH_UNICAST_PAUSE_FRAME_DETECT(macconf->UnicastPauseFrameDetect));
- assert_param(IS_ETH_RECEIVE_FLOWCONTROL(macconf->ReceiveFlowControl));
- assert_param(IS_ETH_TRANSMIT_FLOWCONTROL(macconf->TransmitFlowControl));
- assert_param(IS_ETH_VLAN_TAG_COMPARISON(macconf->VLANTagComparison));
- assert_param(IS_ETH_VLAN_TAG_IDENTIFIER(macconf->VLANTagIdentifier));
-
- /*------------------------ ETHERNET MACCR Configuration --------------------*/
- /* Get the ETHERNET MACCR value */
- tmpreg1 = (heth->Instance)->MACCR;
- /* Clear WD, PCE, PS, TE and RE bits */
- tmpreg1 &= ETH_MACCR_CLEAR_MASK;
-
- tmpreg1 |= (uint32_t)(macconf->Watchdog |
- macconf->Jabber |
- macconf->InterFrameGap |
- macconf->CarrierSense |
- (heth->Init).Speed |
- macconf->ReceiveOwn |
- macconf->LoopbackMode |
- (heth->Init).DuplexMode |
- macconf->ChecksumOffload |
- macconf->RetryTransmission |
- macconf->AutomaticPadCRCStrip |
- macconf->BackOffLimit |
- macconf->DeferralCheck);
-
- /* Write to ETHERNET MACCR */
- (heth->Instance)->MACCR = (uint32_t)tmpreg1;
-
- /* Wait until the write operation will be taken into account :
- at least four TX_CLK/RX_CLK clock cycles */
- tmpreg1 = (heth->Instance)->MACCR;
- HAL_Delay(ETH_REG_WRITE_DELAY);
- (heth->Instance)->MACCR = tmpreg1;
-
- /*----------------------- ETHERNET MACFFR Configuration --------------------*/
- /* Write to ETHERNET MACFFR */
- (heth->Instance)->MACFFR = (uint32_t)(macconf->ReceiveAll |
- macconf->SourceAddrFilter |
- macconf->PassControlFrames |
- macconf->BroadcastFramesReception |
- macconf->DestinationAddrFilter |
- macconf->PromiscuousMode |
- macconf->MulticastFramesFilter |
- macconf->UnicastFramesFilter);
-
- /* Wait until the write operation will be taken into account :
- at least four TX_CLK/RX_CLK clock cycles */
- tmpreg1 = (heth->Instance)->MACFFR;
- HAL_Delay(ETH_REG_WRITE_DELAY);
- (heth->Instance)->MACFFR = tmpreg1;
-
- /*--------------- ETHERNET MACHTHR and MACHTLR Configuration ---------------*/
- /* Write to ETHERNET MACHTHR */
- (heth->Instance)->MACHTHR = (uint32_t)macconf->HashTableHigh;
-
- /* Write to ETHERNET MACHTLR */
- (heth->Instance)->MACHTLR = (uint32_t)macconf->HashTableLow;
- /*----------------------- ETHERNET MACFCR Configuration --------------------*/
-
- /* Get the ETHERNET MACFCR value */
- tmpreg1 = (heth->Instance)->MACFCR;
- /* Clear xx bits */
- tmpreg1 &= ETH_MACFCR_CLEAR_MASK;
-
- tmpreg1 |= (uint32_t)((macconf->PauseTime << 16) |
- macconf->ZeroQuantaPause |
- macconf->PauseLowThreshold |
- macconf->UnicastPauseFrameDetect |
- macconf->ReceiveFlowControl |
- macconf->TransmitFlowControl);
-
- /* Write to ETHERNET MACFCR */
- (heth->Instance)->MACFCR = (uint32_t)tmpreg1;
-
- /* Wait until the write operation will be taken into account :
- at least four TX_CLK/RX_CLK clock cycles */
- tmpreg1 = (heth->Instance)->MACFCR;
- HAL_Delay(ETH_REG_WRITE_DELAY);
- (heth->Instance)->MACFCR = tmpreg1;
-
- /*----------------------- ETHERNET MACVLANTR Configuration -----------------*/
- (heth->Instance)->MACVLANTR = (uint32_t)(macconf->VLANTagComparison |
- macconf->VLANTagIdentifier);
-
- /* Wait until the write operation will be taken into account :
- at least four TX_CLK/RX_CLK clock cycles */
- tmpreg1 = (heth->Instance)->MACVLANTR;
- HAL_Delay(ETH_REG_WRITE_DELAY);
- (heth->Instance)->MACVLANTR = tmpreg1;
- }
- else /* macconf == NULL : here we just configure Speed and Duplex mode */
- {
- /*------------------------ ETHERNET MACCR Configuration --------------------*/
- /* Get the ETHERNET MACCR value */
- tmpreg1 = (heth->Instance)->MACCR;
-
- /* Clear FES and DM bits */
- tmpreg1 &= ~((uint32_t)0x00004800);
-
- tmpreg1 |= (uint32_t)(heth->Init.Speed | heth->Init.DuplexMode);
-
- /* Write to ETHERNET MACCR */
- (heth->Instance)->MACCR = (uint32_t)tmpreg1;
-
- /* Wait until the write operation will be taken into account:
- at least four TX_CLK/RX_CLK clock cycles */
- tmpreg1 = (heth->Instance)->MACCR;
- HAL_Delay(ETH_REG_WRITE_DELAY);
- (heth->Instance)->MACCR = tmpreg1;
- }
-
- /* Set the ETH state to Ready */
- heth->State= HAL_ETH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(heth);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Sets ETH DMA Configuration.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @param dmaconf: DMA Configuration structure
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_ETH_ConfigDMA(ETH_HandleTypeDef *heth, ETH_DMAInitTypeDef *dmaconf)
-{
- uint32_t tmpreg1 = 0;
-
- /* Process Locked */
- __HAL_LOCK(heth);
-
- /* Set the ETH peripheral state to BUSY */
- heth->State= HAL_ETH_STATE_BUSY;
-
- /* Check parameters */
- assert_param(IS_ETH_DROP_TCPIP_CHECKSUM_FRAME(dmaconf->DropTCPIPChecksumErrorFrame));
- assert_param(IS_ETH_RECEIVE_STORE_FORWARD(dmaconf->ReceiveStoreForward));
- assert_param(IS_ETH_FLUSH_RECEIVE_FRAME(dmaconf->FlushReceivedFrame));
- assert_param(IS_ETH_TRANSMIT_STORE_FORWARD(dmaconf->TransmitStoreForward));
- assert_param(IS_ETH_TRANSMIT_THRESHOLD_CONTROL(dmaconf->TransmitThresholdControl));
- assert_param(IS_ETH_FORWARD_ERROR_FRAMES(dmaconf->ForwardErrorFrames));
- assert_param(IS_ETH_FORWARD_UNDERSIZED_GOOD_FRAMES(dmaconf->ForwardUndersizedGoodFrames));
- assert_param(IS_ETH_RECEIVE_THRESHOLD_CONTROL(dmaconf->ReceiveThresholdControl));
- assert_param(IS_ETH_SECOND_FRAME_OPERATE(dmaconf->SecondFrameOperate));
- assert_param(IS_ETH_ADDRESS_ALIGNED_BEATS(dmaconf->AddressAlignedBeats));
- assert_param(IS_ETH_FIXED_BURST(dmaconf->FixedBurst));
- assert_param(IS_ETH_RXDMA_BURST_LENGTH(dmaconf->RxDMABurstLength));
- assert_param(IS_ETH_TXDMA_BURST_LENGTH(dmaconf->TxDMABurstLength));
- assert_param(IS_ETH_ENHANCED_DESCRIPTOR_FORMAT(dmaconf->EnhancedDescriptorFormat));
- assert_param(IS_ETH_DMA_DESC_SKIP_LENGTH(dmaconf->DescriptorSkipLength));
- assert_param(IS_ETH_DMA_ARBITRATION_ROUNDROBIN_RXTX(dmaconf->DMAArbitration));
-
- /*----------------------- ETHERNET DMAOMR Configuration --------------------*/
- /* Get the ETHERNET DMAOMR value */
- tmpreg1 = (heth->Instance)->DMAOMR;
- /* Clear xx bits */
- tmpreg1 &= ETH_DMAOMR_CLEAR_MASK;
-
- tmpreg1 |= (uint32_t)(dmaconf->DropTCPIPChecksumErrorFrame |
- dmaconf->ReceiveStoreForward |
- dmaconf->FlushReceivedFrame |
- dmaconf->TransmitStoreForward |
- dmaconf->TransmitThresholdControl |
- dmaconf->ForwardErrorFrames |
- dmaconf->ForwardUndersizedGoodFrames |
- dmaconf->ReceiveThresholdControl |
- dmaconf->SecondFrameOperate);
-
- /* Write to ETHERNET DMAOMR */
- (heth->Instance)->DMAOMR = (uint32_t)tmpreg1;
-
- /* Wait until the write operation will be taken into account:
- at least four TX_CLK/RX_CLK clock cycles */
- tmpreg1 = (heth->Instance)->DMAOMR;
- HAL_Delay(ETH_REG_WRITE_DELAY);
- (heth->Instance)->DMAOMR = tmpreg1;
-
- /*----------------------- ETHERNET DMABMR Configuration --------------------*/
- (heth->Instance)->DMABMR = (uint32_t)(dmaconf->AddressAlignedBeats |
- dmaconf->FixedBurst |
- dmaconf->RxDMABurstLength | /* !! if 4xPBL is selected for Tx or Rx it is applied for the other */
- dmaconf->TxDMABurstLength |
- dmaconf->EnhancedDescriptorFormat |
- (dmaconf->DescriptorSkipLength << 2) |
- dmaconf->DMAArbitration |
- ETH_DMABMR_USP); /* Enable use of separate PBL for Rx and Tx */
-
- /* Wait until the write operation will be taken into account:
- at least four TX_CLK/RX_CLK clock cycles */
- tmpreg1 = (heth->Instance)->DMABMR;
- HAL_Delay(ETH_REG_WRITE_DELAY);
- (heth->Instance)->DMABMR = tmpreg1;
-
- /* Set the ETH state to Ready */
- heth->State= HAL_ETH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(heth);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup ETH_Exported_Functions_Group4 Peripheral State functions
- * @brief Peripheral State functions
- *
- @verbatim
- ===============================================================================
- ##### Peripheral State functions #####
- ===============================================================================
- [..]
- This subsection permits to get in run-time the status of the peripheral
- and the data flow.
- (+) Get the ETH handle state:
- HAL_ETH_GetState();
-
-
- @endverbatim
- * @{
- */
-
-/**
- * @brief Return the ETH HAL state
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval HAL state
- */
-HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth)
-{
- /* Return ETH state */
- return heth->State;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @addtogroup ETH_Private_Functions
- * @{
- */
-
-/**
- * @brief Configures Ethernet MAC and DMA with default parameters.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @param err: Ethernet Init error
- * @retval HAL status
- */
-static void ETH_MACDMAConfig(ETH_HandleTypeDef *heth, uint32_t err)
-{
- ETH_MACInitTypeDef macinit;
- ETH_DMAInitTypeDef dmainit;
- uint32_t tmpreg1 = 0;
-
- if (err != ETH_SUCCESS) /* Auto-negotiation failed */
- {
- /* Set Ethernet duplex mode to Full-duplex */
- (heth->Init).DuplexMode = ETH_MODE_FULLDUPLEX;
-
- /* Set Ethernet speed to 100M */
- (heth->Init).Speed = ETH_SPEED_100M;
- }
-
- /* Ethernet MAC default initialization **************************************/
- macinit.Watchdog = ETH_WATCHDOG_ENABLE;
- macinit.Jabber = ETH_JABBER_ENABLE;
- macinit.InterFrameGap = ETH_INTERFRAMEGAP_96BIT;
- macinit.CarrierSense = ETH_CARRIERSENCE_ENABLE;
- macinit.ReceiveOwn = ETH_RECEIVEOWN_ENABLE;
- macinit.LoopbackMode = ETH_LOOPBACKMODE_DISABLE;
- if(heth->Init.ChecksumMode == ETH_CHECKSUM_BY_HARDWARE)
- {
- macinit.ChecksumOffload = ETH_CHECKSUMOFFLAOD_ENABLE;
- }
- else
- {
- macinit.ChecksumOffload = ETH_CHECKSUMOFFLAOD_DISABLE;
- }
- macinit.RetryTransmission = ETH_RETRYTRANSMISSION_DISABLE;
- macinit.AutomaticPadCRCStrip = ETH_AUTOMATICPADCRCSTRIP_DISABLE;
- macinit.BackOffLimit = ETH_BACKOFFLIMIT_10;
- macinit.DeferralCheck = ETH_DEFFERRALCHECK_DISABLE;
- macinit.ReceiveAll = ETH_RECEIVEAll_DISABLE;
- macinit.SourceAddrFilter = ETH_SOURCEADDRFILTER_DISABLE;
- macinit.PassControlFrames = ETH_PASSCONTROLFRAMES_BLOCKALL;
- macinit.BroadcastFramesReception = ETH_BROADCASTFRAMESRECEPTION_ENABLE;
- macinit.DestinationAddrFilter = ETH_DESTINATIONADDRFILTER_NORMAL;
- macinit.PromiscuousMode = ETH_PROMISCUOUS_MODE_DISABLE;
- macinit.MulticastFramesFilter = ETH_MULTICASTFRAMESFILTER_PERFECT;
- macinit.UnicastFramesFilter = ETH_UNICASTFRAMESFILTER_PERFECT;
- macinit.HashTableHigh = 0x0;
- macinit.HashTableLow = 0x0;
- macinit.PauseTime = 0x0;
- macinit.ZeroQuantaPause = ETH_ZEROQUANTAPAUSE_DISABLE;
- macinit.PauseLowThreshold = ETH_PAUSELOWTHRESHOLD_MINUS4;
- macinit.UnicastPauseFrameDetect = ETH_UNICASTPAUSEFRAMEDETECT_DISABLE;
- macinit.ReceiveFlowControl = ETH_RECEIVEFLOWCONTROL_DISABLE;
- macinit.TransmitFlowControl = ETH_TRANSMITFLOWCONTROL_DISABLE;
- macinit.VLANTagComparison = ETH_VLANTAGCOMPARISON_16BIT;
- macinit.VLANTagIdentifier = 0x0;
-
- /*------------------------ ETHERNET MACCR Configuration --------------------*/
- /* Get the ETHERNET MACCR value */
- tmpreg1 = (heth->Instance)->MACCR;
- /* Clear WD, PCE, PS, TE and RE bits */
- tmpreg1 &= ETH_MACCR_CLEAR_MASK;
- /* Set the WD bit according to ETH Watchdog value */
- /* Set the JD: bit according to ETH Jabber value */
- /* Set the IFG bit according to ETH InterFrameGap value */
- /* Set the DCRS bit according to ETH CarrierSense value */
- /* Set the FES bit according to ETH Speed value */
- /* Set the DO bit according to ETH ReceiveOwn value */
- /* Set the LM bit according to ETH LoopbackMode value */
- /* Set the DM bit according to ETH Mode value */
- /* Set the IPCO bit according to ETH ChecksumOffload value */
- /* Set the DR bit according to ETH RetryTransmission value */
- /* Set the ACS bit according to ETH AutomaticPadCRCStrip value */
- /* Set the BL bit according to ETH BackOffLimit value */
- /* Set the DC bit according to ETH DeferralCheck value */
- tmpreg1 |= (uint32_t)(macinit.Watchdog |
- macinit.Jabber |
- macinit.InterFrameGap |
- macinit.CarrierSense |
- (heth->Init).Speed |
- macinit.ReceiveOwn |
- macinit.LoopbackMode |
- (heth->Init).DuplexMode |
- macinit.ChecksumOffload |
- macinit.RetryTransmission |
- macinit.AutomaticPadCRCStrip |
- macinit.BackOffLimit |
- macinit.DeferralCheck);
-
- /* Write to ETHERNET MACCR */
- (heth->Instance)->MACCR = (uint32_t)tmpreg1;
-
- /* Wait until the write operation will be taken into account:
- at least four TX_CLK/RX_CLK clock cycles */
- tmpreg1 = (heth->Instance)->MACCR;
- HAL_Delay(ETH_REG_WRITE_DELAY);
- (heth->Instance)->MACCR = tmpreg1;
-
- /*----------------------- ETHERNET MACFFR Configuration --------------------*/
- /* Set the RA bit according to ETH ReceiveAll value */
- /* Set the SAF and SAIF bits according to ETH SourceAddrFilter value */
- /* Set the PCF bit according to ETH PassControlFrames value */
- /* Set the DBF bit according to ETH BroadcastFramesReception value */
- /* Set the DAIF bit according to ETH DestinationAddrFilter value */
- /* Set the PR bit according to ETH PromiscuousMode value */
- /* Set the PM, HMC and HPF bits according to ETH MulticastFramesFilter value */
- /* Set the HUC and HPF bits according to ETH UnicastFramesFilter value */
- /* Write to ETHERNET MACFFR */
- (heth->Instance)->MACFFR = (uint32_t)(macinit.ReceiveAll |
- macinit.SourceAddrFilter |
- macinit.PassControlFrames |
- macinit.BroadcastFramesReception |
- macinit.DestinationAddrFilter |
- macinit.PromiscuousMode |
- macinit.MulticastFramesFilter |
- macinit.UnicastFramesFilter);
-
- /* Wait until the write operation will be taken into account:
- at least four TX_CLK/RX_CLK clock cycles */
- tmpreg1 = (heth->Instance)->MACFFR;
- HAL_Delay(ETH_REG_WRITE_DELAY);
- (heth->Instance)->MACFFR = tmpreg1;
-
- /*--------------- ETHERNET MACHTHR and MACHTLR Configuration --------------*/
- /* Write to ETHERNET MACHTHR */
- (heth->Instance)->MACHTHR = (uint32_t)macinit.HashTableHigh;
-
- /* Write to ETHERNET MACHTLR */
- (heth->Instance)->MACHTLR = (uint32_t)macinit.HashTableLow;
- /*----------------------- ETHERNET MACFCR Configuration -------------------*/
-
- /* Get the ETHERNET MACFCR value */
- tmpreg1 = (heth->Instance)->MACFCR;
- /* Clear xx bits */
- tmpreg1 &= ETH_MACFCR_CLEAR_MASK;
-
- /* Set the PT bit according to ETH PauseTime value */
- /* Set the DZPQ bit according to ETH ZeroQuantaPause value */
- /* Set the PLT bit according to ETH PauseLowThreshold value */
- /* Set the UP bit according to ETH UnicastPauseFrameDetect value */
- /* Set the RFE bit according to ETH ReceiveFlowControl value */
- /* Set the TFE bit according to ETH TransmitFlowControl value */
- tmpreg1 |= (uint32_t)((macinit.PauseTime << 16) |
- macinit.ZeroQuantaPause |
- macinit.PauseLowThreshold |
- macinit.UnicastPauseFrameDetect |
- macinit.ReceiveFlowControl |
- macinit.TransmitFlowControl);
-
- /* Write to ETHERNET MACFCR */
- (heth->Instance)->MACFCR = (uint32_t)tmpreg1;
-
- /* Wait until the write operation will be taken into account:
- at least four TX_CLK/RX_CLK clock cycles */
- tmpreg1 = (heth->Instance)->MACFCR;
- HAL_Delay(ETH_REG_WRITE_DELAY);
- (heth->Instance)->MACFCR = tmpreg1;
-
- /*----------------------- ETHERNET MACVLANTR Configuration ----------------*/
- /* Set the ETV bit according to ETH VLANTagComparison value */
- /* Set the VL bit according to ETH VLANTagIdentifier value */
- (heth->Instance)->MACVLANTR = (uint32_t)(macinit.VLANTagComparison |
- macinit.VLANTagIdentifier);
-
- /* Wait until the write operation will be taken into account:
- at least four TX_CLK/RX_CLK clock cycles */
- tmpreg1 = (heth->Instance)->MACVLANTR;
- HAL_Delay(ETH_REG_WRITE_DELAY);
- (heth->Instance)->MACVLANTR = tmpreg1;
-
- /* Ethernet DMA default initialization ************************************/
- dmainit.DropTCPIPChecksumErrorFrame = ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE;
- dmainit.ReceiveStoreForward = ETH_RECEIVESTOREFORWARD_ENABLE;
- dmainit.FlushReceivedFrame = ETH_FLUSHRECEIVEDFRAME_ENABLE;
- dmainit.TransmitStoreForward = ETH_TRANSMITSTOREFORWARD_ENABLE;
- dmainit.TransmitThresholdControl = ETH_TRANSMITTHRESHOLDCONTROL_64BYTES;
- dmainit.ForwardErrorFrames = ETH_FORWARDERRORFRAMES_DISABLE;
- dmainit.ForwardUndersizedGoodFrames = ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE;
- dmainit.ReceiveThresholdControl = ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES;
- dmainit.SecondFrameOperate = ETH_SECONDFRAMEOPERARTE_ENABLE;
- dmainit.AddressAlignedBeats = ETH_ADDRESSALIGNEDBEATS_ENABLE;
- dmainit.FixedBurst = ETH_FIXEDBURST_ENABLE;
- dmainit.RxDMABurstLength = ETH_RXDMABURSTLENGTH_32BEAT;
- dmainit.TxDMABurstLength = ETH_TXDMABURSTLENGTH_32BEAT;
- dmainit.EnhancedDescriptorFormat = ETH_DMAENHANCEDDESCRIPTOR_ENABLE;
- dmainit.DescriptorSkipLength = 0x0;
- dmainit.DMAArbitration = ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1;
-
- /* Get the ETHERNET DMAOMR value */
- tmpreg1 = (heth->Instance)->DMAOMR;
- /* Clear xx bits */
- tmpreg1 &= ETH_DMAOMR_CLEAR_MASK;
-
- /* Set the DT bit according to ETH DropTCPIPChecksumErrorFrame value */
- /* Set the RSF bit according to ETH ReceiveStoreForward value */
- /* Set the DFF bit according to ETH FlushReceivedFrame value */
- /* Set the TSF bit according to ETH TransmitStoreForward value */
- /* Set the TTC bit according to ETH TransmitThresholdControl value */
- /* Set the FEF bit according to ETH ForwardErrorFrames value */
- /* Set the FUF bit according to ETH ForwardUndersizedGoodFrames value */
- /* Set the RTC bit according to ETH ReceiveThresholdControl value */
- /* Set the OSF bit according to ETH SecondFrameOperate value */
- tmpreg1 |= (uint32_t)(dmainit.DropTCPIPChecksumErrorFrame |
- dmainit.ReceiveStoreForward |
- dmainit.FlushReceivedFrame |
- dmainit.TransmitStoreForward |
- dmainit.TransmitThresholdControl |
- dmainit.ForwardErrorFrames |
- dmainit.ForwardUndersizedGoodFrames |
- dmainit.ReceiveThresholdControl |
- dmainit.SecondFrameOperate);
-
- /* Write to ETHERNET DMAOMR */
- (heth->Instance)->DMAOMR = (uint32_t)tmpreg1;
-
- /* Wait until the write operation will be taken into account:
- at least four TX_CLK/RX_CLK clock cycles */
- tmpreg1 = (heth->Instance)->DMAOMR;
- HAL_Delay(ETH_REG_WRITE_DELAY);
- (heth->Instance)->DMAOMR = tmpreg1;
-
- /*----------------------- ETHERNET DMABMR Configuration ------------------*/
- /* Set the AAL bit according to ETH AddressAlignedBeats value */
- /* Set the FB bit according to ETH FixedBurst value */
- /* Set the RPBL and 4*PBL bits according to ETH RxDMABurstLength value */
- /* Set the PBL and 4*PBL bits according to ETH TxDMABurstLength value */
- /* Set the Enhanced DMA descriptors bit according to ETH EnhancedDescriptorFormat value*/
- /* Set the DSL bit according to ETH DesciptorSkipLength value */
- /* Set the PR and DA bits according to ETH DMAArbitration value */
- (heth->Instance)->DMABMR = (uint32_t)(dmainit.AddressAlignedBeats |
- dmainit.FixedBurst |
- dmainit.RxDMABurstLength | /* !! if 4xPBL is selected for Tx or Rx it is applied for the other */
- dmainit.TxDMABurstLength |
- dmainit.EnhancedDescriptorFormat |
- (dmainit.DescriptorSkipLength << 2) |
- dmainit.DMAArbitration |
- ETH_DMABMR_USP); /* Enable use of separate PBL for Rx and Tx */
-
- /* Wait until the write operation will be taken into account:
- at least four TX_CLK/RX_CLK clock cycles */
- tmpreg1 = (heth->Instance)->DMABMR;
- HAL_Delay(ETH_REG_WRITE_DELAY);
- (heth->Instance)->DMABMR = tmpreg1;
-
- if((heth->Init).RxMode == ETH_RXINTERRUPT_MODE)
- {
- /* Enable the Ethernet Rx Interrupt */
- __HAL_ETH_DMA_ENABLE_IT((heth), ETH_DMA_IT_NIS | ETH_DMA_IT_R);
- }
-
- /* Initialize MAC address in ethernet MAC */
- ETH_MACAddressConfig(heth, ETH_MAC_ADDRESS0, heth->Init.MACAddr);
-}
-
-/**
- * @brief Configures the selected MAC address.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @param MacAddr: The MAC address to configure
- * This parameter can be one of the following values:
- * @arg ETH_MAC_Address0: MAC Address0
- * @arg ETH_MAC_Address1: MAC Address1
- * @arg ETH_MAC_Address2: MAC Address2
- * @arg ETH_MAC_Address3: MAC Address3
- * @param Addr: Pointer to MAC address buffer data (6 bytes)
- * @retval HAL status
- */
-static void ETH_MACAddressConfig(ETH_HandleTypeDef *heth, uint32_t MacAddr, uint8_t *Addr)
-{
- uint32_t tmpreg1;
-
- /* Check the parameters */
- assert_param(IS_ETH_MAC_ADDRESS0123(MacAddr));
-
- /* Calculate the selected MAC address high register */
- tmpreg1 = ((uint32_t)Addr[5] << 8) | (uint32_t)Addr[4];
- /* Load the selected MAC address high register */
- (*(__IO uint32_t *)((uint32_t)(ETH_MAC_ADDR_HBASE + MacAddr))) = tmpreg1;
- /* Calculate the selected MAC address low register */
- tmpreg1 = ((uint32_t)Addr[3] << 24) | ((uint32_t)Addr[2] << 16) | ((uint32_t)Addr[1] << 8) | Addr[0];
-
- /* Load the selected MAC address low register */
- (*(__IO uint32_t *)((uint32_t)(ETH_MAC_ADDR_LBASE + MacAddr))) = tmpreg1;
-}
-
-/**
- * @brief Enables the MAC transmission.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval None
- */
-static void ETH_MACTransmissionEnable(ETH_HandleTypeDef *heth)
-{
- __IO uint32_t tmpreg1 = 0;
-
- /* Enable the MAC transmission */
- (heth->Instance)->MACCR |= ETH_MACCR_TE;
-
- /* Wait until the write operation will be taken into account:
- at least four TX_CLK/RX_CLK clock cycles */
- tmpreg1 = (heth->Instance)->MACCR;
- HAL_Delay(ETH_REG_WRITE_DELAY);
- (heth->Instance)->MACCR = tmpreg1;
-}
-
-/**
- * @brief Disables the MAC transmission.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval None
- */
-static void ETH_MACTransmissionDisable(ETH_HandleTypeDef *heth)
-{
- __IO uint32_t tmpreg1 = 0;
-
- /* Disable the MAC transmission */
- (heth->Instance)->MACCR &= ~ETH_MACCR_TE;
-
- /* Wait until the write operation will be taken into account:
- at least four TX_CLK/RX_CLK clock cycles */
- tmpreg1 = (heth->Instance)->MACCR;
- HAL_Delay(ETH_REG_WRITE_DELAY);
- (heth->Instance)->MACCR = tmpreg1;
-}
-
-/**
- * @brief Enables the MAC reception.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval None
- */
-static void ETH_MACReceptionEnable(ETH_HandleTypeDef *heth)
-{
- __IO uint32_t tmpreg1 = 0;
-
- /* Enable the MAC reception */
- (heth->Instance)->MACCR |= ETH_MACCR_RE;
-
- /* Wait until the write operation will be taken into account:
- at least four TX_CLK/RX_CLK clock cycles */
- tmpreg1 = (heth->Instance)->MACCR;
- HAL_Delay(ETH_REG_WRITE_DELAY);
- (heth->Instance)->MACCR = tmpreg1;
-}
-
-/**
- * @brief Disables the MAC reception.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval None
- */
-static void ETH_MACReceptionDisable(ETH_HandleTypeDef *heth)
-{
- __IO uint32_t tmpreg1 = 0;
-
- /* Disable the MAC reception */
- (heth->Instance)->MACCR &= ~ETH_MACCR_RE;
-
- /* Wait until the write operation will be taken into account:
- at least four TX_CLK/RX_CLK clock cycles */
- tmpreg1 = (heth->Instance)->MACCR;
- HAL_Delay(ETH_REG_WRITE_DELAY);
- (heth->Instance)->MACCR = tmpreg1;
-}
-
-/**
- * @brief Enables the DMA transmission.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval None
- */
-static void ETH_DMATransmissionEnable(ETH_HandleTypeDef *heth)
-{
- /* Enable the DMA transmission */
- (heth->Instance)->DMAOMR |= ETH_DMAOMR_ST;
-}
-
-/**
- * @brief Disables the DMA transmission.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval None
- */
-static void ETH_DMATransmissionDisable(ETH_HandleTypeDef *heth)
-{
- /* Disable the DMA transmission */
- (heth->Instance)->DMAOMR &= ~ETH_DMAOMR_ST;
-}
-
-/**
- * @brief Enables the DMA reception.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval None
- */
-static void ETH_DMAReceptionEnable(ETH_HandleTypeDef *heth)
-{
- /* Enable the DMA reception */
- (heth->Instance)->DMAOMR |= ETH_DMAOMR_SR;
-}
-
-/**
- * @brief Disables the DMA reception.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval None
- */
-static void ETH_DMAReceptionDisable(ETH_HandleTypeDef *heth)
-{
- /* Disable the DMA reception */
- (heth->Instance)->DMAOMR &= ~ETH_DMAOMR_SR;
-}
-
-/**
- * @brief Clears the ETHERNET transmit FIFO.
- * @param heth: pointer to a ETH_HandleTypeDef structure that contains
- * the configuration information for ETHERNET module
- * @retval None
- */
-static void ETH_FlushTransmitFIFO(ETH_HandleTypeDef *heth)
-{
- __IO uint32_t tmpreg1 = 0;
-
- /* Set the Flush Transmit FIFO bit */
- (heth->Instance)->DMAOMR |= ETH_DMAOMR_FTF;
-
- /* Wait until the write operation will be taken into account:
- at least four TX_CLK/RX_CLK clock cycles */
- tmpreg1 = (heth->Instance)->DMAOMR;
- HAL_Delay(ETH_REG_WRITE_DELAY);
- (heth->Instance)->DMAOMR = tmpreg1;
-}
-
-/**
- * @}
- */
-
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-#endif /* HAL_ETH_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c
deleted file mode 100644
index 24923df..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash.c
+++ /dev/null
@@ -1,761 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_flash.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief FLASH HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the internal FLASH memory:
- * + Program operations functions
- * + Memory Control functions
- * + Peripheral Errors functions
- *
- @verbatim
- ==============================================================================
- ##### FLASH peripheral features #####
- ==============================================================================
-
- [..] The Flash memory interface manages CPU AHB I-Code and D-Code accesses
- to the Flash memory. It implements the erase and program Flash memory operations
- and the read and write protection mechanisms.
-
- [..] The Flash memory interface accelerates code execution with a system of instruction
- prefetch and cache lines.
-
- [..] The FLASH main features are:
- (+) Flash memory read operations
- (+) Flash memory program/erase operations
- (+) Read / write protections
- (+) Prefetch on I-Code
- (+) 64 cache lines of 128 bits on I-Code
- (+) 8 cache lines of 128 bits on D-Code
-
-
- ##### How to use this driver #####
- ==============================================================================
- [..]
- This driver provides functions and macros to configure and program the FLASH
- memory of all STM32F4xx devices.
-
- (#) FLASH Memory IO Programming functions:
- (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and
- HAL_FLASH_Lock() functions
- (++) Program functions: byte, half word, word and double word
- (++) There Two modes of programming :
- (+++) Polling mode using HAL_FLASH_Program() function
- (+++) Interrupt mode using HAL_FLASH_Program_IT() function
-
- (#) Interrupts and flags management functions :
- (++) Handle FLASH interrupts by calling HAL_FLASH_IRQHandler()
- (++) Wait for last FLASH operation according to its status
- (++) Get error flag status by calling HAL_SetErrorCode()
-
- [..]
- In addition to these functions, this driver includes a set of macros allowing
- to handle the following operations:
- (+) Set the latency
- (+) Enable/Disable the prefetch buffer
- (+) Enable/Disable the Instruction cache and the Data cache
- (+) Reset the Instruction cache and the Data cache
- (+) Enable/Disable the FLASH interrupts
- (+) Monitor the FLASH flags status
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup FLASH FLASH
- * @brief FLASH HAL module driver
- * @{
- */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @addtogroup FLASH_Private_Constants
- * @{
- */
-#define SECTOR_MASK ((uint32_t)0xFFFFFF07)
-#define FLASH_TIMEOUT_VALUE ((uint32_t)50000)/* 50 s */
-/**
- * @}
- */
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/** @addtogroup FLASH_Private_Variables
- * @{
- */
-/* Variable used for Erase sectors under interruption */
-FLASH_ProcessTypeDef pFlash;
-/**
- * @}
- */
-
-/* Private function prototypes -----------------------------------------------*/
-/** @addtogroup FLASH_Private_Functions
- * @{
- */
-/* Program operations */
-static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data);
-static void FLASH_Program_Word(uint32_t Address, uint32_t Data);
-static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data);
-static void FLASH_Program_Byte(uint32_t Address, uint8_t Data);
-static void FLASH_SetErrorCode(void);
-
-HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup FLASH_Exported_Functions FLASH Exported Functions
- * @{
- */
-
-/** @defgroup FLASH_Exported_Functions_Group1 Programming operation functions
- * @brief Programming operation functions
- *
-@verbatim
- ===============================================================================
- ##### Programming operation functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to manage the FLASH
- program operations.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Program byte, halfword, word or double word at a specified address
- * @param TypeProgram: Indicate the way to program at a specified address.
- * This parameter can be a value of @ref FLASH_Type_Program
- * @param Address: specifies the address to be programmed.
- * @param Data: specifies the data to be programmed
- *
- * @retval HAL_StatusTypeDef HAL Status
- */
-HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
-{
- HAL_StatusTypeDef status = HAL_ERROR;
-
- /* Process Locked */
- __HAL_LOCK(&pFlash);
-
- /* Check the parameters */
- assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- if(TypeProgram == FLASH_TYPEPROGRAM_BYTE)
- {
- /*Program byte (8-bit) at a specified address.*/
- FLASH_Program_Byte(Address, (uint8_t) Data);
- }
- else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
- {
- /*Program halfword (16-bit) at a specified address.*/
- FLASH_Program_HalfWord(Address, (uint16_t) Data);
- }
- else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
- {
- /*Program word (32-bit) at a specified address.*/
- FLASH_Program_Word(Address, (uint32_t) Data);
- }
- else
- {
- /*Program double word (64-bit) at a specified address.*/
- FLASH_Program_DoubleWord(Address, Data);
- }
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- /* If the program operation is completed, disable the PG Bit */
- FLASH->CR &= (~FLASH_CR_PG);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(&pFlash);
-
- return status;
-}
-
-/**
- * @brief Program byte, halfword, word or double word at a specified address with interrupt enabled.
- * @param TypeProgram: Indicate the way to program at a specified address.
- * This parameter can be a value of @ref FLASH_Type_Program
- * @param Address: specifies the address to be programmed.
- * @param Data: specifies the data to be programmed
- *
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Process Locked */
- __HAL_LOCK(&pFlash);
-
- /* Check the parameters */
- assert_param(IS_FLASH_TYPEPROGRAM(TypeProgram));
-
- /* Enable End of FLASH Operation interrupt */
- __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP);
-
- /* Enable Error source interrupt */
- __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR);
-
- /* Clear pending flags (if any) */
- __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |\
- FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR| FLASH_FLAG_PGSERR);
-
- pFlash.ProcedureOnGoing = FLASH_PROC_PROGRAM;
- pFlash.Address = Address;
-
- if(TypeProgram == FLASH_TYPEPROGRAM_BYTE)
- {
- /*Program byte (8-bit) at a specified address.*/
- FLASH_Program_Byte(Address, (uint8_t) Data);
- }
- else if(TypeProgram == FLASH_TYPEPROGRAM_HALFWORD)
- {
- /*Program halfword (16-bit) at a specified address.*/
- FLASH_Program_HalfWord(Address, (uint16_t) Data);
- }
- else if(TypeProgram == FLASH_TYPEPROGRAM_WORD)
- {
- /*Program word (32-bit) at a specified address.*/
- FLASH_Program_Word(Address, (uint32_t) Data);
- }
- else
- {
- /*Program double word (64-bit) at a specified address.*/
- FLASH_Program_DoubleWord(Address, Data);
- }
-
- return status;
-}
-
-/**
- * @brief This function handles FLASH interrupt request.
- * @retval None
- */
-void HAL_FLASH_IRQHandler(void)
-{
- uint32_t temp;
-
- /* If the program operation is completed, disable the PG Bit */
- FLASH->CR &= (~FLASH_CR_PG);
-
- /* If the erase operation is completed, disable the SER Bit */
- FLASH->CR &= (~FLASH_CR_SER);
- FLASH->CR &= SECTOR_MASK;
-
- /* if the erase operation is completed, disable the MER Bit */
- FLASH->CR &= (~FLASH_MER_BIT);
-
- /* Check FLASH End of Operation flag */
- if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_EOP) != RESET)
- {
- if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE)
- {
- /*Nb of sector to erased can be decreased*/
- pFlash.NbSectorsToErase--;
-
- /* Check if there are still sectors to erase*/
- if(pFlash.NbSectorsToErase != 0)
- {
- temp = pFlash.Sector;
- /*Indicate user which sector has been erased*/
- HAL_FLASH_EndOfOperationCallback(temp);
-
- /* Clear pending flags (if any) */
- __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |\
- FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR| FLASH_FLAG_PGSERR);
-
- /*Increment sector number*/
- pFlash.Sector++;
- temp = pFlash.Sector;
- FLASH_Erase_Sector(temp, pFlash.VoltageForErase);
- }
- else
- {
- /*No more sectors to Erase, user callback can be called.*/
- /*Reset Sector and stop Erase sectors procedure*/
- pFlash.Sector = temp = 0xFFFFFFFF;
- pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
- /* FLASH EOP interrupt user callback */
- HAL_FLASH_EndOfOperationCallback(temp);
- /* Clear FLASH End of Operation pending bit */
- __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
- }
- }
- else
- {
- if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE)
- {
- /*MassErase ended. Return the selected bank*/
- /* FLASH EOP interrupt user callback */
- HAL_FLASH_EndOfOperationCallback(pFlash.Bank);
- }
- else
- {
- /*Program ended. Return the selected address*/
- /* FLASH EOP interrupt user callback */
- HAL_FLASH_EndOfOperationCallback(pFlash.Address);
- }
- pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
- /* Clear FLASH End of Operation pending bit */
- __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP);
- }
-
- }
-
- /* Check FLASH operation error flags */
- if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
- FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET)
- {
- if(pFlash.ProcedureOnGoing == FLASH_PROC_SECTERASE)
- {
- /*return the faulty sector*/
- temp = pFlash.Sector;
- pFlash.Sector = 0xFFFFFFFF;
- }
- else if(pFlash.ProcedureOnGoing == FLASH_PROC_MASSERASE)
- {
- /*return the faulty bank*/
- temp = pFlash.Bank;
- }
- else
- {
- /*return the faulty address*/
- temp = pFlash.Address;
- }
-
- /*Save the Error code*/
- FLASH_SetErrorCode();
-
- /* FLASH error interrupt user callback */
- HAL_FLASH_OperationErrorCallback(temp);
- /* Clear FLASH error pending bits */
- __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR |\
- FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR);
-
- /*Stop the procedure ongoing*/
- pFlash.ProcedureOnGoing = FLASH_PROC_NONE;
- }
-
- if(pFlash.ProcedureOnGoing == FLASH_PROC_NONE)
- {
- /* Disable End of FLASH Operation interrupt */
- __HAL_FLASH_DISABLE_IT(FLASH_IT_EOP);
-
- /* Disable Error source interrupt */
- __HAL_FLASH_DISABLE_IT(FLASH_IT_ERR);
-
- /* Process Unlocked */
- __HAL_UNLOCK(&pFlash);
- }
-
-}
-
-/**
- * @brief FLASH end of operation interrupt callback
- * @param ReturnValue: The value saved in this parameter depends on the ongoing procedure
- * Mass Erase: Bank number which has been requested to erase
- * Sectors Erase: Sector which has been erased
- * (if 0xFFFFFFFF, it means that all the selected sectors have been erased)
- * Program: Address which was selected for data program
- * @retval None
- */
-__weak void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_FLASH_EndOfOperationCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief FLASH operation error interrupt callback
- * @param ReturnValue: The value saved in this parameter depends on the ongoing procedure
- * Mass Erase: Bank number which has been requested to erase
- * Sectors Erase: Sector number which returned an error
- * Program: Address which was selected for data program
- * @retval None
- */
-__weak void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_FLASH_OperationErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup FLASH_Exported_Functions_Group2 Peripheral Control functions
- * @brief management functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Control functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to control the FLASH
- memory operations.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Unlock the FLASH control register access
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_FLASH_Unlock(void)
-{
- if((FLASH->CR & FLASH_CR_LOCK) != RESET)
- {
- /* Authorize the FLASH Registers access */
- FLASH->KEYR = FLASH_KEY1;
- FLASH->KEYR = FLASH_KEY2;
- }
- else
- {
- return HAL_ERROR;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Locks the FLASH control register access
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_FLASH_Lock(void)
-{
- /* Set the LOCK Bit to lock the FLASH Registers access */
- FLASH->CR |= FLASH_CR_LOCK;
-
- return HAL_OK;
-}
-
-/**
- * @brief Unlock the FLASH Option Control Registers access.
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void)
-{
- if((FLASH->OPTCR & FLASH_OPTCR_OPTLOCK) != RESET)
- {
- /* Authorizes the Option Byte register programming */
- FLASH->OPTKEYR = FLASH_OPT_KEY1;
- FLASH->OPTKEYR = FLASH_OPT_KEY2;
- }
- else
- {
- return HAL_ERROR;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Lock the FLASH Option Control Registers access.
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_FLASH_OB_Lock(void)
-{
- /* Set the OPTLOCK Bit to lock the FLASH Option Byte Registers access */
- FLASH->OPTCR |= FLASH_OPTCR_OPTLOCK;
-
- return HAL_OK;
-}
-
-/**
- * @brief Launch the option byte loading.
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_FLASH_OB_Launch(void)
-{
- /* Set the OPTSTRT bit in OPTCR register */
- *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= FLASH_OPTCR_OPTSTRT;
-
- /* Wait for last operation to be completed */
- return(FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE));
-}
-
-/**
- * @}
- */
-
-/** @defgroup FLASH_Exported_Functions_Group3 Peripheral State and Errors functions
- * @brief Peripheral Errors functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Errors functions #####
- ===============================================================================
- [..]
- This subsection permits to get in run-time Errors of the FLASH peripheral.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Get the specific FLASH error flag.
- * @retval FLASH_ErrorCode: The returned value can be a combination of:
- * @arg HAL_FLASH_ERROR_RD: FLASH Read Protection error flag (PCROP)
- * @arg HAL_FLASH_ERROR_PGS: FLASH Programming Sequence error flag
- * @arg HAL_FLASH_ERROR_PGP: FLASH Programming Parallelism error flag
- * @arg HAL_FLASH_ERROR_PGA: FLASH Programming Alignment error flag
- * @arg HAL_FLASH_ERROR_WRP: FLASH Write protected error flag
- * @arg HAL_FLASH_ERROR_OPERATION: FLASH operation Error flag
- */
-uint32_t HAL_FLASH_GetError(void)
-{
- return pFlash.ErrorCode;
-}
-
-/**
- * @}
- */
-
-/**
- * @brief Wait for a FLASH operation to complete.
- * @param Timeout: maximum flash operationtimeout
- * @retval HAL Status
- */
-HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Clear Error Code */
- pFlash.ErrorCode = HAL_FLASH_ERROR_NONE;
-
- /* Wait for the FLASH operation to complete by polling on BUSY flag to be reset.
- Even if the FLASH operation fails, the BUSY flag will be reset and an error
- flag will be set */
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(__HAL_FLASH_GET_FLAG(FLASH_FLAG_BSY) != RESET)
- {
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- return HAL_TIMEOUT;
- }
- }
- }
-
- if(__HAL_FLASH_GET_FLAG((FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR | FLASH_FLAG_PGAERR | \
- FLASH_FLAG_PGPERR | FLASH_FLAG_PGSERR | FLASH_FLAG_RDERR)) != RESET)
- {
- /*Save the error code*/
- FLASH_SetErrorCode();
- return HAL_ERROR;
- }
-
- /* If there is an error flag set */
- return HAL_OK;
-
-}
-
-/**
- * @brief Program a double word (64-bit) at a specified address.
- * @note This function must be used when the device voltage range is from
- * 2.7V to 3.6V and an External Vpp is present.
- *
- * @note If an erase and a program operations are requested simultaneously,
- * the erase operation is performed before the program one.
- *
- * @param Address: specifies the address to be programmed.
- * @param Data: specifies the data to be programmed.
- * @retval None
- */
-static void FLASH_Program_DoubleWord(uint32_t Address, uint64_t Data)
-{
- /* Check the parameters */
- assert_param(IS_FLASH_ADDRESS(Address));
-
- /* If the previous operation is completed, proceed to program the new data */
- FLASH->CR &= CR_PSIZE_MASK;
- FLASH->CR |= FLASH_PSIZE_DOUBLE_WORD;
- FLASH->CR |= FLASH_CR_PG;
-
- *(__IO uint64_t*)Address = Data;
-}
-
-
-/**
- * @brief Program word (32-bit) at a specified address.
- * @note This function must be used when the device voltage range is from
- * 2.7V to 3.6V.
- *
- * @note If an erase and a program operations are requested simultaneously,
- * the erase operation is performed before the program one.
- *
- * @param Address: specifies the address to be programmed.
- * @param Data: specifies the data to be programmed.
- * @retval None
- */
-static void FLASH_Program_Word(uint32_t Address, uint32_t Data)
-{
- /* Check the parameters */
- assert_param(IS_FLASH_ADDRESS(Address));
-
- /* If the previous operation is completed, proceed to program the new data */
- FLASH->CR &= CR_PSIZE_MASK;
- FLASH->CR |= FLASH_PSIZE_WORD;
- FLASH->CR |= FLASH_CR_PG;
-
- *(__IO uint32_t*)Address = Data;
-}
-
-/**
- * @brief Program a half-word (16-bit) at a specified address.
- * @note This function must be used when the device voltage range is from
- * 2.7V to 3.6V.
- *
- * @note If an erase and a program operations are requested simultaneously,
- * the erase operation is performed before the program one.
- *
- * @param Address: specifies the address to be programmed.
- * @param Data: specifies the data to be programmed.
- * @retval None
- */
-static void FLASH_Program_HalfWord(uint32_t Address, uint16_t Data)
-{
- /* Check the parameters */
- assert_param(IS_FLASH_ADDRESS(Address));
-
- /* If the previous operation is completed, proceed to program the new data */
- FLASH->CR &= CR_PSIZE_MASK;
- FLASH->CR |= FLASH_PSIZE_HALF_WORD;
- FLASH->CR |= FLASH_CR_PG;
-
- *(__IO uint16_t*)Address = Data;
-}
-
-/**
- * @brief Program byte (8-bit) at a specified address.
- * @note This function must be used when the device voltage range is from
- * 2.7V to 3.6V.
- *
- * @note If an erase and a program operations are requested simultaneously,
- * the erase operation is performed before the program one.
- *
- * @param Address: specifies the address to be programmed.
- * @param Data: specifies the data to be programmed.
- * @retval None
- */
-static void FLASH_Program_Byte(uint32_t Address, uint8_t Data)
-{
- /* Check the parameters */
- assert_param(IS_FLASH_ADDRESS(Address));
-
- /* If the previous operation is completed, proceed to program the new data */
- FLASH->CR &= CR_PSIZE_MASK;
- FLASH->CR |= FLASH_PSIZE_BYTE;
- FLASH->CR |= FLASH_CR_PG;
-
- *(__IO uint8_t*)Address = Data;
-}
-
-/**
- * @brief Set the specific FLASH error flag.
- * @retval None
- */
-static void FLASH_SetErrorCode(void)
-{
- if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_WRPERR) != RESET)
- {
- pFlash.ErrorCode |= HAL_FLASH_ERROR_WRP;
- }
-
- if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGAERR) != RESET)
- {
- pFlash.ErrorCode |= HAL_FLASH_ERROR_PGA;
- }
-
- if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGPERR) != RESET)
- {
- pFlash.ErrorCode |= HAL_FLASH_ERROR_PGP;
- }
-
- if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_PGSERR) != RESET)
- {
- pFlash.ErrorCode |= HAL_FLASH_ERROR_PGS;
- }
-
- if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_RDERR) != RESET)
- {
- pFlash.ErrorCode |= HAL_FLASH_ERROR_RD;
- }
-
- if(__HAL_FLASH_GET_FLAG(FLASH_FLAG_OPERR) != RESET)
- {
- pFlash.ErrorCode |= HAL_FLASH_ERROR_OPERATION;
- }
-}
-
-/**
- * @}
- */
-
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c
deleted file mode 100644
index 0fadd8f..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ex.c
+++ /dev/null
@@ -1,1316 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_flash_ex.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief Extended FLASH HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the FLASH extension peripheral:
- * + Extended programming operations functions
- *
- @verbatim
- ==============================================================================
- ##### Flash Extension features #####
- ==============================================================================
-
- [..] Comparing to other previous devices, the FLASH interface for STM32F427xx/437xx and
- STM32F429xx/439xx devices contains the following additional features
-
- (+) Capacity up to 2 Mbyte with dual bank architecture supporting read-while-write
- capability (RWW)
- (+) Dual bank memory organization
- (+) PCROP protection for all banks
-
- ##### How to use this driver #####
- ==============================================================================
- [..] This driver provides functions to configure and program the FLASH memory
- of all STM32F427xx/437xx andSTM32F429xx/439xx devices. It includes
- (#) FLASH Memory Erase functions:
- (++) Lock and Unlock the FLASH interface using HAL_FLASH_Unlock() and
- HAL_FLASH_Lock() functions
- (++) Erase function: Erase sector, erase all sectors
- (++) There are two modes of erase :
- (+++) Polling Mode using HAL_FLASHEx_Erase()
- (+++) Interrupt Mode using HAL_FLASHEx_Erase_IT()
-
- (#) Option Bytes Programming functions: Use HAL_FLASHEx_OBProgram() to :
- (++) Set/Reset the write protection
- (++) Set the Read protection Level
- (++) Set the BOR level
- (++) Program the user Option Bytes
- (#) Advanced Option Bytes Programming functions: Use HAL_FLASHEx_AdvOBProgram() to :
- (++) Extended space (bank 2) erase function
- (++) Full FLASH space (2 Mo) erase (bank 1 and bank 2)
- (++) Dual Boot activation
- (++) Write protection configuration for bank 2
- (++) PCROP protection configuration and control for both banks
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup FLASHEx FLASHEx
- * @brief FLASH HAL Extension module driver
- * @{
- */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @addtogroup FLASHEx_Private_Constants
- * @{
- */
-#define SECTOR_MASK ((uint32_t)0xFFFFFF07)
-#define FLASH_TIMEOUT_VALUE ((uint32_t)50000)/* 50 s */
-/**
- * @}
- */
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/** @addtogroup FLASHEx_Private_Variables
- * @{
- */
-extern FLASH_ProcessTypeDef pFlash;
-/**
- * @}
- */
-
-/* Private function prototypes -----------------------------------------------*/
-/** @addtogroup FLASHEx_Private_Functions
- * @{
- */
-/* Option bytes control */
-static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks);
-static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks);
-static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks);
-static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level);
-static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t Iwdg, uint8_t Stop, uint8_t Stdby);
-static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level);
-static uint8_t FLASH_OB_GetUser(void);
-static uint16_t FLASH_OB_GetWRP(void);
-static uint8_t FLASH_OB_GetRDP(void);
-static uint8_t FLASH_OB_GetBOR(void);
-
-#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
-static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t Sector);
-static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t Sector);
-#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
-static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks);
-static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks);
-static HAL_StatusTypeDef FLASH_OB_BootConfig(uint8_t BootConfig);
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
-
-extern HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout);
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup FLASHEx_Exported_Functions FLASHEx Exported Functions
- * @{
- */
-
-/** @defgroup FLASHEx_Exported_Functions_Group1 Extended IO operation functions
- * @brief Extended IO operation functions
- *
-@verbatim
- ===============================================================================
- ##### Extended programming operation functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to manage the Extension FLASH
- programming operations Operations.
-
-@endverbatim
- * @{
- */
-/**
- * @brief Perform a mass erase or erase the specified FLASH memory sectors
- * @param[in] pEraseInit: pointer to an FLASH_EraseInitTypeDef structure that
- * contains the configuration information for the erasing.
- *
- * @param[out] SectorError: pointer to variable that
- * contains the configuration information on faulty sector in case of error
- * (0xFFFFFFFF means that all the sectors have been correctly erased)
- *
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError)
-{
- HAL_StatusTypeDef status = HAL_ERROR;
- uint32_t index = 0;
-
- /* Process Locked */
- __HAL_LOCK(&pFlash);
-
- /* Check the parameters */
- assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- /*Initialization of SectorError variable*/
- *SectorError = 0xFFFFFFFF;
-
- if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
- {
- /*Mass erase to be done*/
- FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks);
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- /* if the erase operation is completed, disable the MER Bit */
- FLASH->CR &= (~FLASH_MER_BIT);
- }
- else
- {
- /* Check the parameters */
- assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector));
-
- /* Erase by sector by sector to be done*/
- for(index = pEraseInit->Sector; index < (pEraseInit->NbSectors + pEraseInit->Sector); index++)
- {
- FLASH_Erase_Sector(index, (uint8_t) pEraseInit->VoltageRange);
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- /* If the erase operation is completed, disable the SER Bit */
- FLASH->CR &= (~FLASH_CR_SER);
- FLASH->CR &= SECTOR_MASK;
-
- if(status != HAL_OK)
- {
- /* In case of error, stop erase procedure and return the faulty sector*/
- *SectorError = index;
- break;
- }
- }
- }
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(&pFlash);
-
- return status;
-}
-
-/**
- * @brief Perform a mass erase or erase the specified FLASH memory sectors with interrupt enabled
- * @param pEraseInit: pointer to an FLASH_EraseInitTypeDef structure that
- * contains the configuration information for the erasing.
- *
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Process Locked */
- __HAL_LOCK(&pFlash);
-
- /* Check the parameters */
- assert_param(IS_FLASH_TYPEERASE(pEraseInit->TypeErase));
-
- /* Enable End of FLASH Operation interrupt */
- __HAL_FLASH_ENABLE_IT(FLASH_IT_EOP);
-
- /* Enable Error source interrupt */
- __HAL_FLASH_ENABLE_IT(FLASH_IT_ERR);
-
- /* Clear pending flags (if any) */
- __HAL_FLASH_CLEAR_FLAG(FLASH_FLAG_EOP | FLASH_FLAG_OPERR | FLASH_FLAG_WRPERR |\
- FLASH_FLAG_PGAERR | FLASH_FLAG_PGPERR| FLASH_FLAG_PGSERR);
-
- if(pEraseInit->TypeErase == FLASH_TYPEERASE_MASSERASE)
- {
- /*Mass erase to be done*/
- pFlash.ProcedureOnGoing = FLASH_PROC_MASSERASE;
- pFlash.Bank = pEraseInit->Banks;
- FLASH_MassErase((uint8_t) pEraseInit->VoltageRange, pEraseInit->Banks);
- }
- else
- {
- /* Erase by sector to be done*/
-
- /* Check the parameters */
- assert_param(IS_FLASH_NBSECTORS(pEraseInit->NbSectors + pEraseInit->Sector));
-
- pFlash.ProcedureOnGoing = FLASH_PROC_SECTERASE;
- pFlash.NbSectorsToErase = pEraseInit->NbSectors;
- pFlash.Sector = pEraseInit->Sector;
- pFlash.VoltageForErase = (uint8_t)pEraseInit->VoltageRange;
-
- /*Erase 1st sector and wait for IT*/
- FLASH_Erase_Sector(pEraseInit->Sector, pEraseInit->VoltageRange);
- }
-
- return status;
-}
-
-/**
- * @brief Program option bytes
- * @param pOBInit: pointer to an FLASH_OBInitStruct structure that
- * contains the configuration information for the programming.
- *
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit)
-{
- HAL_StatusTypeDef status = HAL_ERROR;
-
- /* Process Locked */
- __HAL_LOCK(&pFlash);
-
- /* Check the parameters */
- assert_param(IS_OPTIONBYTE(pOBInit->OptionType));
-
- /*Write protection configuration*/
- if((pOBInit->OptionType & OPTIONBYTE_WRP) == OPTIONBYTE_WRP)
- {
- assert_param(IS_WRPSTATE(pOBInit->WRPState));
- if(pOBInit->WRPState == OB_WRPSTATE_ENABLE)
- {
- /*Enable of Write protection on the selected Sector*/
- status = FLASH_OB_EnableWRP(pOBInit->WRPSector, pOBInit->Banks);
- }
- else
- {
- /*Disable of Write protection on the selected Sector*/
- status = FLASH_OB_DisableWRP(pOBInit->WRPSector, pOBInit->Banks);
- }
- }
-
- /*Read protection configuration*/
- if((pOBInit->OptionType & OPTIONBYTE_RDP) == OPTIONBYTE_RDP)
- {
- status = FLASH_OB_RDP_LevelConfig(pOBInit->RDPLevel);
- }
-
- /*USER configuration*/
- if((pOBInit->OptionType & OPTIONBYTE_USER) == OPTIONBYTE_USER)
- {
- status = FLASH_OB_UserConfig(pOBInit->USERConfig&OB_IWDG_SW,
- pOBInit->USERConfig&OB_STOP_NO_RST,
- pOBInit->USERConfig&OB_STDBY_NO_RST);
- }
-
- /*BOR Level configuration*/
- if((pOBInit->OptionType & OPTIONBYTE_BOR) == OPTIONBYTE_BOR)
- {
- status = FLASH_OB_BOR_LevelConfig(pOBInit->BORLevel);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(&pFlash);
-
- return status;
-}
-
-/**
- * @brief Get the Option byte configuration
- * @param pOBInit: pointer to an FLASH_OBInitStruct structure that
- * contains the configuration information for the programming.
- *
- * @retval None
- */
-void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit)
-{
- pOBInit->OptionType = OPTIONBYTE_WRP | OPTIONBYTE_RDP | OPTIONBYTE_USER | OPTIONBYTE_BOR;
-
- /*Get WRP*/
- pOBInit->WRPSector = (uint32_t)FLASH_OB_GetWRP();
-
- /*Get RDP Level*/
- pOBInit->RDPLevel = (uint32_t)FLASH_OB_GetRDP();
-
- /*Get USER*/
- pOBInit->USERConfig = (uint8_t)FLASH_OB_GetUser();
-
- /*Get BOR Level*/
- pOBInit->BORLevel = (uint32_t)FLASH_OB_GetBOR();
-}
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\
- defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
-/**
- * @brief Program option bytes
- * @param pAdvOBInit: pointer to an FLASH_AdvOBProgramInitTypeDef structure that
- * contains the configuration information for the programming.
- *
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram (FLASH_AdvOBProgramInitTypeDef *pAdvOBInit)
-{
- HAL_StatusTypeDef status = HAL_ERROR;
-
- /* Check the parameters */
- assert_param(IS_OBEX(pAdvOBInit->OptionType));
-
- /*Program PCROP option byte*/
- if(((pAdvOBInit->OptionType) & OPTIONBYTE_PCROP) == OPTIONBYTE_PCROP)
- {
- /* Check the parameters */
- assert_param(IS_PCROPSTATE(pAdvOBInit->PCROPState));
- if((pAdvOBInit->PCROPState) == OB_PCROP_STATE_ENABLE)
- {
- /*Enable of Write protection on the selected Sector*/
-#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
- status = FLASH_OB_EnablePCROP(pAdvOBInit->Sectors);
-#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
- status = FLASH_OB_EnablePCROP(pAdvOBInit->SectorsBank1, pAdvOBInit->SectorsBank2, pAdvOBInit->Banks);
-#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
- }
- else
- {
- /*Disable of Write protection on the selected Sector*/
-#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
- status = FLASH_OB_DisablePCROP(pAdvOBInit->Sectors);
-#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
- status = FLASH_OB_DisablePCROP(pAdvOBInit->SectorsBank1, pAdvOBInit->SectorsBank2, pAdvOBInit->Banks);
-#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
- }
- }
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
- /*Program BOOT config option byte*/
- if(((pAdvOBInit->OptionType) & OPTIONBYTE_BOOTCONFIG) == OPTIONBYTE_BOOTCONFIG)
- {
- status = FLASH_OB_BootConfig(pAdvOBInit->BootConfig);
- }
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-
- return status;
-}
-
-/**
- * @brief Get the OBEX byte configuration
- * @param pAdvOBInit: pointer to an FLASH_AdvOBProgramInitTypeDef structure that
- * contains the configuration information for the programming.
- *
- * @retval None
- */
-void HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit)
-{
-#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
- /*Get Sector*/
- pAdvOBInit->Sectors = (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS));
-#else /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */
- /*Get Sector for Bank1*/
- pAdvOBInit->SectorsBank1 = (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS));
-
- /*Get Sector for Bank2*/
- pAdvOBInit->SectorsBank2 = (*(__IO uint16_t *)(OPTCR1_BYTE2_ADDRESS));
-
- /*Get Boot config OB*/
- pAdvOBInit->BootConfig = *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS;
-#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
-}
-
-/**
- * @brief Select the Protection Mode
- *
- * @note After PCROP activated Option Byte modification NOT POSSIBLE! excepted
- * Global Read Out Protection modification (from level1 to level0)
- * @note Once SPRMOD bit is active unprotection of a protected sector is not possible
- * @note Read a protected sector will set RDERR Flag and write a protected sector will set WRPERR Flag
- * @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F401xx/STM32F411xx/STM32F446xx devices.
- *
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void)
-{
- uint8_t optiontmp = 0xFF;
-
- /* Mask SPRMOD bit */
- optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS) & (uint8_t)0x7F);
-
- /* Update Option Byte */
- *(__IO uint8_t *)OPTCR_BYTE3_ADDRESS = (uint8_t)(OB_PCROP_SELECTED | optiontmp);
-
- return HAL_OK;
-}
-
-/**
- * @brief Deselect the Protection Mode
- *
- * @note After PCROP activated Option Byte modification NOT POSSIBLE! excepted
- * Global Read Out Protection modification (from level1 to level0)
- * @note Once SPRMOD bit is active unprotection of a protected sector is not possible
- * @note Read a protected sector will set RDERR Flag and write a protected sector will set WRPERR Flag
- * @note This function can be used only for STM32F42xxx/STM32F43xxx/STM32F401xx/STM32F411xx/STM32F446xx devices.
- *
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void)
-{
- uint8_t optiontmp = 0xFF;
-
- /* Mask SPRMOD bit */
- optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE3_ADDRESS) & (uint8_t)0x7F);
-
- /* Update Option Byte */
- *(__IO uint8_t *)OPTCR_BYTE3_ADDRESS = (uint8_t)(OB_PCROP_DESELECTED | optiontmp);
-
- return HAL_OK;
-}
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE */
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
-/**
- * @brief Returns the FLASH Write Protection Option Bytes value for Bank 2
- * @note This function can be used only for STM32F427X and STM32F429X devices.
- * @retval The FLASH Write Protection Option Bytes value
- */
-uint16_t HAL_FLASHEx_OB_GetBank2WRP(void)
-{
- /* Return the FLASH write protection Register value */
- return (*(__IO uint16_t *)(OPTCR1_BYTE2_ADDRESS));
-}
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-
-/**
- * @}
- */
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
-/**
- * @brief Full erase of FLASH memory sectors
- * @param VoltageRange: The device voltage range which defines the erase parallelism.
- * This parameter can be one of the following values:
- * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
- * the operation will be done by byte (8-bit)
- * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
- * the operation will be done by half word (16-bit)
- * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
- * the operation will be done by word (32-bit)
- * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
- * the operation will be done by double word (64-bit)
- *
- * @param Banks: Banks to be erased
- * This parameter can be one of the following values:
- * @arg FLASH_BANK_1: Bank1 to be erased
- * @arg FLASH_BANK_2: Bank2 to be erased
- * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased
- *
- * @retval HAL Status
- */
-static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks)
-{
- uint32_t tmp_psize = 0;
-
- /* Check the parameters */
- assert_param(IS_VOLTAGERANGE(VoltageRange));
- assert_param(IS_FLASH_BANK(Banks));
-
- /* if the previous operation is completed, proceed to erase all sectors */
- FLASH->CR &= CR_PSIZE_MASK;
- FLASH->CR |= tmp_psize;
- if(Banks == FLASH_BANK_BOTH)
- {
- /* bank1 & bank2 will be erased*/
- FLASH->CR |= FLASH_MER_BIT;
- }
- else if(Banks == FLASH_BANK_1)
- {
- /*Only bank1 will be erased*/
- FLASH->CR |= FLASH_CR_MER1;
- }
- else
- {
- /*Only bank2 will be erased*/
- FLASH->CR |= FLASH_CR_MER2;
- }
- FLASH->CR |= FLASH_CR_STRT;
-}
-
-/**
- * @brief Erase the specified FLASH memory sector
- * @param Sector: FLASH sector to erase
- * The value of this parameter depend on device used within the same series
- * @param VoltageRange: The device voltage range which defines the erase parallelism.
- * This parameter can be one of the following values:
- * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
- * the operation will be done by byte (8-bit)
- * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
- * the operation will be done by half word (16-bit)
- * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
- * the operation will be done by word (32-bit)
- * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
- * the operation will be done by double word (64-bit)
- *
- * @retval None
- */
-void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange)
-{
- uint32_t tmp_psize = 0;
-
- /* Check the parameters */
- assert_param(IS_FLASH_SECTOR(Sector));
- assert_param(IS_VOLTAGERANGE(VoltageRange));
-
- if(VoltageRange == FLASH_VOLTAGE_RANGE_1)
- {
- tmp_psize = FLASH_PSIZE_BYTE;
- }
- else if(VoltageRange == FLASH_VOLTAGE_RANGE_2)
- {
- tmp_psize = FLASH_PSIZE_HALF_WORD;
- }
- else if(VoltageRange == FLASH_VOLTAGE_RANGE_3)
- {
- tmp_psize = FLASH_PSIZE_WORD;
- }
- else
- {
- tmp_psize = FLASH_PSIZE_DOUBLE_WORD;
- }
-
- /* Need to add offset of 4 when sector higher than FLASH_SECTOR_11 */
- if(Sector > FLASH_SECTOR_11)
- {
- Sector += 4;
- }
- /* If the previous operation is completed, proceed to erase the sector */
- FLASH->CR &= CR_PSIZE_MASK;
- FLASH->CR |= tmp_psize;
- FLASH->CR &= SECTOR_MASK;
- FLASH->CR |= FLASH_CR_SER | (Sector << POSITION_VAL(FLASH_CR_SNB));
- FLASH->CR |= FLASH_CR_STRT;
-}
-
-/**
- * @brief Enable the write protection of the desired bank1 or bank 2 sectors
- *
- * @note When the memory read protection level is selected (RDP level = 1),
- * it is not possible to program or erase the flash sector i if CortexM4
- * debug features are connected or boot code is executed in RAM, even if nWRPi = 1
- * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1).
- *
- * @param WRPSector: specifies the sector(s) to be write protected.
- * This parameter can be one of the following values:
- * @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_23
- * @arg OB_WRP_SECTOR_All
- * @note BANK2 starts from OB_WRP_SECTOR_12
- *
- * @param Banks: Enable write protection on all the sectors for the specific bank
- * This parameter can be one of the following values:
- * @arg FLASH_BANK_1: WRP on all sectors of bank1
- * @arg FLASH_BANK_2: WRP on all sectors of bank2
- * @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2
- *
- * @retval HAL FLASH State
- */
-static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Check the parameters */
- assert_param(IS_OB_WRP_SECTOR(WRPSector));
- assert_param(IS_FLASH_BANK(Banks));
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- if(((WRPSector == OB_WRP_SECTOR_All) && ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))) ||
- (WRPSector < OB_WRP_SECTOR_12))
- {
- if(WRPSector == OB_WRP_SECTOR_All)
- {
- /*Write protection on all sector of BANK1*/
- *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~(WRPSector>>12));
- }
- else
- {
- /*Write protection done on sectors of BANK1*/
- *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~WRPSector);
- }
- }
- else
- {
- /*Write protection done on sectors of BANK2*/
- *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~(WRPSector>>12));
- }
-
- /*Write protection on all sector of BANK2*/
- if((WRPSector == OB_WRP_SECTOR_All) && (Banks == FLASH_BANK_BOTH))
- {
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~(WRPSector>>12));
- }
- }
-
- }
- return status;
-}
-
-/**
- * @brief Disable the write protection of the desired bank1 or bank 2 sectors
- *
- * @note When the memory read protection level is selected (RDP level = 1),
- * it is not possible to program or erase the flash sector i if CortexM4
- * debug features are connected or boot code is executed in RAM, even if nWRPi = 1
- * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1).
- *
- * @param WRPSector: specifies the sector(s) to be write protected.
- * This parameter can be one of the following values:
- * @arg WRPSector: A value between OB_WRP_SECTOR_0 and OB_WRP_SECTOR_23
- * @arg OB_WRP_Sector_All
- * @note BANK2 starts from OB_WRP_SECTOR_12
- *
- * @param Banks: Disable write protection on all the sectors for the specific bank
- * This parameter can be one of the following values:
- * @arg FLASH_BANK_1: Bank1 to be erased
- * @arg FLASH_BANK_2: Bank2 to be erased
- * @arg FLASH_BANK_BOTH: Bank1 and Bank2 to be erased
- *
- * @retval HAL Status
- */
-static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Check the parameters */
- assert_param(IS_OB_WRP_SECTOR(WRPSector));
- assert_param(IS_FLASH_BANK(Banks));
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- if(((WRPSector == OB_WRP_SECTOR_All) && ((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))) ||
- (WRPSector < OB_WRP_SECTOR_12))
- {
- if(WRPSector == OB_WRP_SECTOR_All)
- {
- /*Write protection on all sector of BANK1*/
- *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)(WRPSector>>12);
- }
- else
- {
- /*Write protection done on sectors of BANK1*/
- *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)WRPSector;
- }
- }
- else
- {
- /*Write protection done on sectors of BANK2*/
- *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)(WRPSector>>12);
- }
-
- /*Write protection on all sector of BANK2*/
- if((WRPSector == OB_WRP_SECTOR_All) && (Banks == FLASH_BANK_BOTH))
- {
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)(WRPSector>>12);
- }
- }
-
- }
-
- return status;
-}
-
-/**
- * @brief Configure the Dual Bank Boot.
- *
- * @note This function can be used only for STM32F42xxx/43xxx devices.
- *
- * @param BootConfig specifies the Dual Bank Boot Option byte.
- * This parameter can be one of the following values:
- * @arg OB_Dual_BootEnabled: Dual Bank Boot Enable
- * @arg OB_Dual_BootDisabled: Dual Bank Boot Disabled
- * @retval None
- */
-static HAL_StatusTypeDef FLASH_OB_BootConfig(uint8_t BootConfig)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Check the parameters */
- assert_param(IS_OB_BOOT(BootConfig));
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- /* Set Dual Bank Boot */
- *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS &= (~FLASH_OPTCR_BFB2);
- *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= BootConfig;
- }
-
- return status;
-}
-
-/**
- * @brief Enable the read/write protection (PCROP) of the desired
- * sectors of Bank 1 and/or Bank 2.
- * @note This function can be used only for STM32F42xxx/43xxx devices.
- * @param SectorBank1 Specifies the sector(s) to be read/write protected or unprotected for bank1.
- * This parameter can be one of the following values:
- * @arg OB_PCROP: A value between OB_PCROP_SECTOR_0 and OB_PCROP_SECTOR_11
- * @arg OB_PCROP_SECTOR__All
- * @param SectorBank2 Specifies the sector(s) to be read/write protected or unprotected for bank2.
- * This parameter can be one of the following values:
- * @arg OB_PCROP: A value between OB_PCROP_SECTOR_12 and OB_PCROP_SECTOR_23
- * @arg OB_PCROP_SECTOR__All
- * @param Banks Enable PCROP protection on all the sectors for the specific bank
- * This parameter can be one of the following values:
- * @arg FLASH_BANK_1: WRP on all sectors of bank1
- * @arg FLASH_BANK_2: WRP on all sectors of bank2
- * @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2
- *
- * @retval HAL Status
- */
-static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- assert_param(IS_FLASH_BANK(Banks));
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- if((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))
- {
- assert_param(IS_OB_PCROP(SectorBank1));
- /*Write protection done on sectors of BANK1*/
- *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)SectorBank1;
- }
- else
- {
- assert_param(IS_OB_PCROP(SectorBank2));
- /*Write protection done on sectors of BANK2*/
- *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)SectorBank2;
- }
-
- /*Write protection on all sector of BANK2*/
- if(Banks == FLASH_BANK_BOTH)
- {
- assert_param(IS_OB_PCROP(SectorBank2));
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- /*Write protection done on sectors of BANK2*/
- *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS |= (uint16_t)SectorBank2;
- }
- }
-
- }
-
- return status;
-}
-
-
-/**
- * @brief Disable the read/write protection (PCROP) of the desired
- * sectors of Bank 1 and/or Bank 2.
- * @note This function can be used only for STM32F42xxx/43xxx devices.
- * @param SectorBank1 specifies the sector(s) to be read/write protected or unprotected for bank1.
- * This parameter can be one of the following values:
- * @arg OB_PCROP: A value between OB_PCROP_SECTOR_0 and OB_PCROP_SECTOR_11
- * @arg OB_PCROP_SECTOR__All
- * @param SectorBank2 Specifies the sector(s) to be read/write protected or unprotected for bank2.
- * This parameter can be one of the following values:
- * @arg OB_PCROP: A value between OB_PCROP_SECTOR_12 and OB_PCROP_SECTOR_23
- * @arg OB_PCROP_SECTOR__All
- * @param Banks Disable PCROP protection on all the sectors for the specific bank
- * This parameter can be one of the following values:
- * @arg FLASH_BANK_1: WRP on all sectors of bank1
- * @arg FLASH_BANK_2: WRP on all sectors of bank2
- * @arg FLASH_BANK_BOTH: WRP on all sectors of bank1 & bank2
- *
- * @retval HAL Status
- */
-static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t SectorBank1, uint32_t SectorBank2, uint32_t Banks)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Check the parameters */
- assert_param(IS_FLASH_BANK(Banks));
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- if((Banks == FLASH_BANK_1) || (Banks == FLASH_BANK_BOTH))
- {
- assert_param(IS_OB_PCROP(SectorBank1));
- /*Write protection done on sectors of BANK1*/
- *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~SectorBank1);
- }
- else
- {
- /*Write protection done on sectors of BANK2*/
- assert_param(IS_OB_PCROP(SectorBank2));
- *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~SectorBank2);
- }
-
- /*Write protection on all sector of BANK2*/
- if(Banks == FLASH_BANK_BOTH)
- {
- assert_param(IS_OB_PCROP(SectorBank2));
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- /*Write protection done on sectors of BANK2*/
- *(__IO uint16_t*)OPTCR1_BYTE2_ADDRESS &= (~SectorBank2);
- }
- }
-
- }
-
- return status;
-
-}
-
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
- defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
-/**
- * @brief Mass erase of FLASH memory
- * @param VoltageRange: The device voltage range which defines the erase parallelism.
- * This parameter can be one of the following values:
- * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
- * the operation will be done by byte (8-bit)
- * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
- * the operation will be done by half word (16-bit)
- * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
- * the operation will be done by word (32-bit)
- * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
- * the operation will be done by double word (64-bit)
- *
- * @param Banks: Banks to be erased
- * This parameter can be one of the following values:
- * @arg FLASH_BANK_1: Bank1 to be erased
- *
- * @retval None
- */
-static void FLASH_MassErase(uint8_t VoltageRange, uint32_t Banks)
-{
- uint32_t tmp_psize = 0;
-
- /* Check the parameters */
- assert_param(IS_VOLTAGERANGE(VoltageRange));
- assert_param(IS_FLASH_BANK(Banks));
-
- /* If the previous operation is completed, proceed to erase all sectors */
- FLASH->CR &= CR_PSIZE_MASK;
- FLASH->CR |= tmp_psize;
- FLASH->CR |= FLASH_CR_MER;
- FLASH->CR |= FLASH_CR_STRT;
-}
-
-/**
- * @brief Erase the specified FLASH memory sector
- * @param Sector: FLASH sector to erase
- * The value of this parameter depend on device used within the same series
- * @param VoltageRange: The device voltage range which defines the erase parallelism.
- * This parameter can be one of the following values:
- * @arg FLASH_VOLTAGE_RANGE_1: when the device voltage range is 1.8V to 2.1V,
- * the operation will be done by byte (8-bit)
- * @arg FLASH_VOLTAGE_RANGE_2: when the device voltage range is 2.1V to 2.7V,
- * the operation will be done by half word (16-bit)
- * @arg FLASH_VOLTAGE_RANGE_3: when the device voltage range is 2.7V to 3.6V,
- * the operation will be done by word (32-bit)
- * @arg FLASH_VOLTAGE_RANGE_4: when the device voltage range is 2.7V to 3.6V + External Vpp,
- * the operation will be done by double word (64-bit)
- *
- * @retval None
- */
-void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange)
-{
- uint32_t tmp_psize = 0;
-
- /* Check the parameters */
- assert_param(IS_FLASH_SECTOR(Sector));
- assert_param(IS_VOLTAGERANGE(VoltageRange));
-
- if(VoltageRange == FLASH_VOLTAGE_RANGE_1)
- {
- tmp_psize = FLASH_PSIZE_BYTE;
- }
- else if(VoltageRange == FLASH_VOLTAGE_RANGE_2)
- {
- tmp_psize = FLASH_PSIZE_HALF_WORD;
- }
- else if(VoltageRange == FLASH_VOLTAGE_RANGE_3)
- {
- tmp_psize = FLASH_PSIZE_WORD;
- }
- else
- {
- tmp_psize = FLASH_PSIZE_DOUBLE_WORD;
- }
-
- /* If the previous operation is completed, proceed to erase the sector */
- FLASH->CR &= CR_PSIZE_MASK;
- FLASH->CR |= tmp_psize;
- FLASH->CR &= SECTOR_MASK;
- FLASH->CR |= FLASH_CR_SER | (Sector << POSITION_VAL(FLASH_CR_SNB));
- FLASH->CR |= FLASH_CR_STRT;
-}
-
-/**
- * @brief Enable the write protection of the desired bank 1 sectors
- *
- * @note When the memory read protection level is selected (RDP level = 1),
- * it is not possible to program or erase the flash sector i if CortexM4
- * debug features are connected or boot code is executed in RAM, even if nWRPi = 1
- * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1).
- *
- * @param WRPSector: specifies the sector(s) to be write protected.
- * The value of this parameter depend on device used within the same series
- *
- * @param Banks: Enable write protection on all the sectors for the specific bank
- * This parameter can be one of the following values:
- * @arg FLASH_BANK_1: WRP on all sectors of bank1
- *
- * @retval HAL Status
- */
-static HAL_StatusTypeDef FLASH_OB_EnableWRP(uint32_t WRPSector, uint32_t Banks)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Check the parameters */
- assert_param(IS_OB_WRP_SECTOR(WRPSector));
- assert_param(IS_FLASH_BANK(Banks));
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~WRPSector);
- }
-
- return status;
-}
-
-/**
- * @brief Disable the write protection of the desired bank 1 sectors
- *
- * @note When the memory read protection level is selected (RDP level = 1),
- * it is not possible to program or erase the flash sector i if CortexM4
- * debug features are connected or boot code is executed in RAM, even if nWRPi = 1
- * @note Active value of nWRPi bits is inverted when PCROP mode is active (SPRMOD =1).
- *
- * @param WRPSector: specifies the sector(s) to be write protected.
- * The value of this parameter depend on device used within the same series
- *
- * @param Banks: Enable write protection on all the sectors for the specific bank
- * This parameter can be one of the following values:
- * @arg FLASH_BANK_1: WRP on all sectors of bank1
- *
- * @retval HAL Status
- */
-static HAL_StatusTypeDef FLASH_OB_DisableWRP(uint32_t WRPSector, uint32_t Banks)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Check the parameters */
- assert_param(IS_OB_WRP_SECTOR(WRPSector));
- assert_param(IS_FLASH_BANK(Banks));
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)WRPSector;
- }
-
- return status;
-}
-#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F411xE || STM32F446xx */
-
-#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
-/**
- * @brief Enable the read/write protection (PCROP) of the desired sectors.
- * @note This function can be used only for STM32F401xx devices.
- * @param Sector specifies the sector(s) to be read/write protected or unprotected.
- * This parameter can be one of the following values:
- * @arg OB_PCROP: A value between OB_PCROP_Sector0 and OB_PCROP_Sector5
- * @arg OB_PCROP_Sector_All
- * @retval HAL Status
- */
-static HAL_StatusTypeDef FLASH_OB_EnablePCROP(uint32_t Sector)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Check the parameters */
- assert_param(IS_OB_PCROP(Sector));
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS |= (uint16_t)Sector;
- }
-
- return status;
-}
-
-
-/**
- * @brief Disable the read/write protection (PCROP) of the desired sectors.
- * @note This function can be used only for STM32F401xx devices.
- * @param Sector specifies the sector(s) to be read/write protected or unprotected.
- * This parameter can be one of the following values:
- * @arg OB_PCROP: A value between OB_PCROP_Sector0 and OB_PCROP_Sector5
- * @arg OB_PCROP_Sector_All
- * @retval HAL Status
- */
-static HAL_StatusTypeDef FLASH_OB_DisablePCROP(uint32_t Sector)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Check the parameters */
- assert_param(IS_OB_PCROP(Sector));
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- *(__IO uint16_t*)OPTCR_BYTE2_ADDRESS &= (~Sector);
- }
-
- return status;
-
-}
-#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */
-
-/**
- * @brief Set the read protection level.
- * @param Level: specifies the read protection level.
- * This parameter can be one of the following values:
- * @arg OB_RDP_LEVEL_0: No protection
- * @arg OB_RDP_LEVEL_1: Read protection of the memory
- * @arg OB_RDP_LEVEL_2: Full chip protection
- *
- * @note WARNING: When enabling OB_RDP level 2 it's no more possible to go back to level 1 or 0
- *
- * @retval HAL Status
- */
-static HAL_StatusTypeDef FLASH_OB_RDP_LevelConfig(uint8_t Level)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Check the parameters */
- assert_param(IS_OB_RDP_LEVEL(Level));
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- *(__IO uint8_t*)OPTCR_BYTE1_ADDRESS = Level;
- }
-
- return status;
-}
-
-/**
- * @brief Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY.
- * @param Iwdg: Selects the IWDG mode
- * This parameter can be one of the following values:
- * @arg OB_IWDG_SW: Software IWDG selected
- * @arg OB_IWDG_HW: Hardware IWDG selected
- * @param Stop: Reset event when entering STOP mode.
- * This parameter can be one of the following values:
- * @arg OB_STOP_NO_RST: No reset generated when entering in STOP
- * @arg OB_STOP_RST: Reset generated when entering in STOP
- * @param Stdby: Reset event when entering Standby mode.
- * This parameter can be one of the following values:
- * @arg OB_STDBY_NO_RST: No reset generated when entering in STANDBY
- * @arg OB_STDBY_RST: Reset generated when entering in STANDBY
- * @retval HAL Status
- */
-static HAL_StatusTypeDef FLASH_OB_UserConfig(uint8_t Iwdg, uint8_t Stop, uint8_t Stdby)
-{
- uint8_t optiontmp = 0xFF;
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Check the parameters */
- assert_param(IS_OB_IWDG_SOURCE(Iwdg));
- assert_param(IS_OB_STOP_SOURCE(Stop));
- assert_param(IS_OB_STDBY_SOURCE(Stdby));
-
- /* Wait for last operation to be completed */
- status = FLASH_WaitForLastOperation((uint32_t)FLASH_TIMEOUT_VALUE);
-
- if(status == HAL_OK)
- {
- /* Mask OPTLOCK, OPTSTRT, BOR_LEV and BFB2 bits */
- optiontmp = (uint8_t)((*(__IO uint8_t *)OPTCR_BYTE0_ADDRESS) & (uint8_t)0x1F);
-
- /* Update User Option Byte */
- *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS = Iwdg | (uint8_t)(Stdby | (uint8_t)(Stop | ((uint8_t)optiontmp)));
- }
-
- return status;
-}
-
-/**
- * @brief Set the BOR Level.
- * @param Level: specifies the Option Bytes BOR Reset Level.
- * This parameter can be one of the following values:
- * @arg OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V
- * @arg OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V
- * @arg OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V
- * @arg OB_BOR_OFF: Supply voltage ranges from 1.62 to 2.1 V
- * @retval HAL Status
- */
-static HAL_StatusTypeDef FLASH_OB_BOR_LevelConfig(uint8_t Level)
-{
- /* Check the parameters */
- assert_param(IS_OB_BOR_LEVEL(Level));
-
- /* Set the BOR Level */
- *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS &= (~FLASH_OPTCR_BOR_LEV);
- *(__IO uint8_t *)OPTCR_BYTE0_ADDRESS |= Level;
-
- return HAL_OK;
-}
-
-/**
- * @brief Return the FLASH User Option Byte value.
- * @retval uint8_t FLASH User Option Bytes values: IWDG_SW(Bit0), RST_STOP(Bit1)
- * and RST_STDBY(Bit2).
- */
-static uint8_t FLASH_OB_GetUser(void)
-{
- /* Return the User Option Byte */
- return ((uint8_t)(FLASH->OPTCR & 0xE0));
-}
-
-/**
- * @brief Return the FLASH Write Protection Option Bytes value.
- * @retval uint16_t FLASH Write Protection Option Bytes value
- */
-static uint16_t FLASH_OB_GetWRP(void)
-{
- /* Return the FLASH write protection Register value */
- return (*(__IO uint16_t *)(OPTCR_BYTE2_ADDRESS));
-}
-
-/**
- * @brief Returns the FLASH Read Protection level.
- * @retval FLASH ReadOut Protection Status:
- * This parameter can be one of the following values:
- * @arg OB_RDP_LEVEL_0: No protection
- * @arg OB_RDP_LEVEL_1: Read protection of the memory
- * @arg OB_RDP_LEVEL_2: Full chip protection
- */
-static uint8_t FLASH_OB_GetRDP(void)
-{
- uint8_t readstatus = OB_RDP_LEVEL_0;
-
- if((*(__IO uint8_t*)(OPTCR_BYTE1_ADDRESS) == (uint8_t)OB_RDP_LEVEL_2))
- {
- readstatus = OB_RDP_LEVEL_2;
- }
- else if((*(__IO uint8_t*)(OPTCR_BYTE1_ADDRESS) == (uint8_t)OB_RDP_LEVEL_1))
- {
- readstatus = OB_RDP_LEVEL_1;
- }
- else
- {
- readstatus = OB_RDP_LEVEL_0;
- }
-
- return readstatus;
-}
-
-/**
- * @brief Returns the FLASH BOR level.
- * @retval uint8_t The FLASH BOR level:
- * - OB_BOR_LEVEL3: Supply voltage ranges from 2.7 to 3.6 V
- * - OB_BOR_LEVEL2: Supply voltage ranges from 2.4 to 2.7 V
- * - OB_BOR_LEVEL1: Supply voltage ranges from 2.1 to 2.4 V
- * - OB_BOR_OFF : Supply voltage ranges from 1.62 to 2.1 V
- */
-static uint8_t FLASH_OB_GetBOR(void)
-{
- /* Return the FLASH BOR level */
- return (uint8_t)(*(__IO uint8_t *)(OPTCR_BYTE0_ADDRESS) & (uint8_t)0x0C);
-}
-
-/**
- * @}
- */
-
-#endif /* HAL_FLASH_MODULE_ENABLED */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c
deleted file mode 100644
index 6fb67d3..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_flash_ramfunc.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_flash_ramfunc.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief FLASH RAMFUNC module driver.
- * This file provides a FLASH firmware functions which should be
- * executed from internal SRAM
- * + Stop/Start the flash interface while System Run
- * + Enable/Disable the flash sleep while System Run
- @verbatim
- ==============================================================================
- ##### APIs executed from Internal RAM #####
- ==============================================================================
- [..]
- *** ARM Compiler ***
- --------------------
- [..] RAM functions are defined using the toolchain options.
- Functions that are be executed in RAM should reside in a separate
- source module. Using the 'Options for File' dialog you can simply change
- the 'Code / Const' area of a module to a memory space in physical RAM.
- Available memory areas are declared in the 'Target' tab of the
- Options for Target' dialog.
-
- *** ICCARM Compiler ***
- -----------------------
- [..] RAM functions are defined using a specific toolchain keyword "__ramfunc".
-
- *** GNU Compiler ***
- --------------------
- [..] RAM functions are defined using a specific toolchain attribute
- "__attribute__((section(".RamFunc")))".
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup FLASHRAMFUNC FLASH RAMFUNC
- * @brief FLASH functions executed from RAM
- * @{
- */
-
-#ifdef HAL_FLASH_MODULE_ENABLED
-
-#if defined(STM32F411xE) || defined(STM32F446xx)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup FLASHRAMFUNC_Exported_Functions FLASH RAMFUNC Exported Functions
- * @{
- */
-
-/** @defgroup FLASHRAMFUNC_Exported_Functions_Group1 Peripheral features functions executed from internal RAM
- * @brief Peripheral Extended features functions
- *
-@verbatim
-
- ===============================================================================
- ##### ramfunc functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions that should be executed from RAM
- transfers.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Stop the flash interface while System Run
- * @note This mode is only available for STM32F411xx devices.
- * @note This mode couldn't be set while executing with the flash itself.
- * It should be done with specific routine executed from RAM.
- * @retval None
- */
-__RAM_FUNC HAL_FLASHEx_StopFlashInterfaceClk(void)
-{
- /* Enable Power ctrl clock */
- __HAL_RCC_PWR_CLK_ENABLE();
- /* Stop the flash interface while System Run */
- SET_BIT(PWR->CR, PWR_CR_FISSR);
-
- return HAL_OK;
-}
-
-/**
- * @brief Start the flash interface while System Run
- * @note This mode is only available for STM32F411xx devices.
- * @note This mode couldn't be set while executing with the flash itself.
- * It should be done with specific routine executed from RAM.
- * @retval None
- */
-__RAM_FUNC HAL_FLASHEx_StartFlashInterfaceClk(void)
-{
- /* Enable Power ctrl clock */
- __HAL_RCC_PWR_CLK_ENABLE();
- /* Start the flash interface while System Run */
- CLEAR_BIT(PWR->CR, PWR_CR_FISSR);
-
- return HAL_OK;
-}
-
-/**
- * @brief Enable the flash sleep while System Run
- * @note This mode is only available for STM32F411xx devices.
- * @note This mode could n't be set while executing with the flash itself.
- * It should be done with specific routine executed from RAM.
- * @retval None
- */
-__RAM_FUNC HAL_FLASHEx_EnableFlashSleepMode(void)
-{
- /* Enable Power ctrl clock */
- __HAL_RCC_PWR_CLK_ENABLE();
- /* Enable the flash sleep while System Run */
- SET_BIT(PWR->CR, PWR_CR_FMSSR);
-
- return HAL_OK;
-}
-
-/**
- * @brief Disable the flash sleep while System Run
- * @note This mode is only available for STM32F411xx devices.
- * @note This mode couldn't be set while executing with the flash itself.
- * It should be done with specific routine executed from RAM.
- * @retval None
- */
-__RAM_FUNC HAL_FLASHEx_DisableFlashSleepMode(void)
-{
- /* Enable Power ctrl clock */
- __HAL_RCC_PWR_CLK_ENABLE();
- /* Disable the flash sleep while System Run */
- CLEAR_BIT(PWR->CR, PWR_CR_FMSSR);
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* STM32F411xE || STM32F446xx */
-#endif /* HAL_FLASH_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c.c
deleted file mode 100644
index 41dc90a..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c.c
+++ /dev/null
@@ -1,4098 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_fmpi2c.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief FMPI2C HAL module driver.
- *
- * This file provides firmware functions to manage the following
- * functionalities of the Inter Integrated Circuit (FMPI2C) peripheral:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral State functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- The FMPI2C HAL driver can be used as follows:
-
- (#) Declare a FMPI2C_HandleTypeDef handle structure, for example:
- FMPI2C_HandleTypeDef hfmpi2c;
-
- (#)Initialize the FMPI2C low level resources by implement the HAL_FMPI2C_MspInit ()API:
- (##) Enable the FMPI2Cx interface clock
- (##) FMPI2C pins configuration
- (+++) Enable the clock for the FMPI2C GPIOs
- (+++) Configure FMPI2C pins as alternate function open-drain
- (##) NVIC configuration if you need to use interrupt process
- (+++) Configure the FMPI2Cx interrupt priority
- (+++) Enable the NVIC FMPI2C IRQ Channel
- (##) DMA Configuration if you need to use DMA process
- (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive stream
- (+++) Enable the DMAx interface clock using
- (+++) Configure the DMA handle parameters
- (+++) Configure the DMA Tx or Rx Stream
- (+++) Associate the initilalized DMA handle to the hfmpi2c DMA Tx or Rx handle
- (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx Stream
-
- (#) Configure the Communication Clock Timing, Own Address1, Master Adressing Mode, Dual Addressing mode,
- Own Address2, Own Address2 Mask, General call and Nostretch mode in the hfmpi2c Init structure.
-
- (#) Initialize the FMPI2C registers by calling the HAL_FMPI2C_Init() API:
- (+++) These API's configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
- by calling the customed HAL_FMPI2C_MspInit(&hfmpi2c) API.
-
- (#) To check if target device is ready for communication, use the function HAL_FMPI2C_IsDeviceReady()
-
- (#) For FMPI2C IO and IO MEM operations, three mode of operations are available within this driver :
-
- *** Polling mode IO operation ***
- =================================
- [..]
- (+) Transmit in master mode an amount of data in blocking mode using HAL_FMPI2C_Master_Transmit()
- (+) Receive in master mode an amount of data in blocking mode using HAL_FMPI2C_Master_Receive()
- (+) Transmit in slave mode an amount of data in blocking mode using HAL_FMPI2C_Slave_Transmit()
- (+) Receive in slave mode an amount of data in blocking mode using HAL_FMPI2C_Slave_Receive()
-
- *** Polling mode IO MEM operation ***
- =====================================
- [..]
- (+) Write an amount of data in blocking mode to a specific memory address using HAL_FMPI2C_Mem_Write()
- (+) Read an amount of data in blocking mode from a specific memory address using HAL_FMPI2C_Mem_Read()
-
-
- *** Interrupt mode IO operation ***
- ===================================
- [..]
- (+) Transmit in master mode an amount of data in non blocking mode using HAL_FMPI2C_Master_Transmit_IT()
- (+) At transmission end of transfer HAL_FMPI2C_MasterTxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_FMPI2C_MasterTxCpltCallback
- (+) Receive in master mode an amount of data in non blocking mode using HAL_FMPI2C_Master_Receive_IT()
- (+) At reception end of transfer HAL_FMPI2C_MasterRxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_FMPI2C_MasterRxCpltCallback
- (+) Transmit in slave mode an amount of data in non blocking mode using HAL_FMPI2C_Slave_Transmit_IT()
- (+) At transmission end of transfer HAL_FMPI2C_SlaveTxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_FMPI2C_SlaveTxCpltCallback
- (+) Receive in slave mode an amount of data in non blocking mode using HAL_FMPI2C_Slave_Receive_IT()
- (+) At reception end of transfer HAL_FMPI2C_SlaveRxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_FMPI2C_SlaveRxCpltCallback
- (+) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_FMPI2C_ErrorCallback
-
- *** Interrupt mode IO MEM operation ***
- =======================================
- [..]
- (+) Write an amount of data in no-blocking mode with Interrupt to a specific memory address using
- HAL_FMPI2C_Mem_Write_IT()
- (+) At MEM end of write transfer HAL_FMPI2C_MemTxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_FMPI2C_MemTxCpltCallback
- (+) Read an amount of data in no-blocking mode with Interrupt from a specific memory address using
- HAL_FMPI2C_Mem_Read_IT()
- (+) At MEM end of read transfer HAL_FMPI2C_MemRxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_FMPI2C_MemRxCpltCallback
- (+) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_FMPI2C_ErrorCallback
-
- *** DMA mode IO operation ***
- ==============================
- [..]
- (+) Transmit in master mode an amount of data in non blocking mode (DMA) using
- HAL_FMPI2C_Master_Transmit_DMA()
- (+) At transmission end of transfer HAL_FMPI2C_MasterTxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_FMPI2C_MasterTxCpltCallback
- (+) Receive in master mode an amount of data in non blocking mode (DMA) using
- HAL_FMPI2C_Master_Receive_DMA()
- (+) At reception end of transfer HAL_FMPI2C_MasterRxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_FMPI2C_MasterRxCpltCallback
- (+) Transmit in slave mode an amount of data in non blocking mode (DMA) using
- HAL_FMPI2C_Slave_Transmit_DMA()
- (+) At transmission end of transfer HAL_FMPI2C_SlaveTxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_FMPI2C_SlaveTxCpltCallback
- (+) Receive in slave mode an amount of data in non blocking mode (DMA) using
- HAL_FMPI2C_Slave_Receive_DMA()
- (+) At reception end of transfer HAL_FMPI2C_SlaveRxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_FMPI2C_SlaveRxCpltCallback
- (+) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_FMPI2C_ErrorCallback
-
- *** DMA mode IO MEM operation ***
- =================================
- [..]
- (+) Write an amount of data in no-blocking mode with DMA to a specific memory address using
- HAL_FMPI2C_Mem_Write_DMA()
- (+) At MEM end of write transfer HAL_FMPI2C_MemTxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_FMPI2C_MemTxCpltCallback
- (+) Read an amount of data in no-blocking mode with DMA from a specific memory address using
- HAL_FMPI2C_Mem_Read_DMA()
- (+) At MEM end of read transfer HAL_FMPI2C_MemRxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_FMPI2C_MemRxCpltCallback
- (+) In case of transfer Error, HAL_FMPI2C_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_FMPI2C_ErrorCallback
-
-
- *** FMPI2C HAL driver macros list ***
- ==================================
- [..]
- Below the list of most used macros in FMPI2C HAL driver.
-
- (+) __HAL_FMPI2C_ENABLE: Enable the FMPI2C peripheral
- (+) __HAL_FMPI2C_DISABLE: Disable the FMPI2C peripheral
- (+) __HAL_FMPI2C_GET_FLAG : Checks whether the specified FMPI2C flag is set or not
- (+) __HAL_FMPI2C_CLEAR_FLAG : Clears the specified FMPI2C pending flag
- (+) __HAL_FMPI2C_ENABLE_IT: Enables the specified FMPI2C interrupt
- (+) __HAL_FMPI2C_DISABLE_IT: Disables the specified FMPI2C interrupt
-
- [..]
- (@) You can refer to the FMPI2C HAL driver header file for more useful macros
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup FMPI2C FMPI2C
- * @brief FMPI2C HAL module driver
- * @{
- */
-
-#ifdef HAL_FMPI2C_MODULE_ENABLED
-
-#if defined(STM32F446xx)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @addtogroup FMPI2C_Private_Constants
- * @{
- */
-#define TIMING_CLEAR_MASK ((uint32_t)0xF0FFFFFF) /*<! FMPI2C TIMING clear register Mask */
-#define FMPI2C_TIMEOUT_ADDR ((uint32_t)10000) /* 10 s */
-#define FMPI2C_TIMEOUT_BUSY ((uint32_t)25) /* 25 ms */
-#define FMPI2C_TIMEOUT_DIR ((uint32_t)25) /* 25 ms */
-#define FMPI2C_TIMEOUT_RXNE ((uint32_t)25) /* 25 ms */
-#define FMPI2C_TIMEOUT_STOPF ((uint32_t)25) /* 25 ms */
-#define FMPI2C_TIMEOUT_TC ((uint32_t)25) /* 25 ms */
-#define FMPI2C_TIMEOUT_TCR ((uint32_t)25) /* 25 ms */
-#define FMPI2C_TIMEOUT_TXIS ((uint32_t)25) /* 25 ms */
-#define FMPI2C_TIMEOUT_FLAG ((uint32_t)25) /* 25 ms */
-/**
- * @}
- */
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @addtogroup FMPI2C_Private_Functions
- * @brief FMPI2C private functions
- * @{
- */
-static void FMPI2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma);
-static void FMPI2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma);
-static void FMPI2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma);
-static void FMPI2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma);
-static void FMPI2C_DMAMemTransmitCplt(DMA_HandleTypeDef *hdma);
-static void FMPI2C_DMAMemReceiveCplt(DMA_HandleTypeDef *hdma);
-static void FMPI2C_DMAError(DMA_HandleTypeDef *hdma);
-
-static HAL_StatusTypeDef FMPI2C_RequestMemoryWrite(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout);
-static HAL_StatusTypeDef FMPI2C_RequestMemoryRead(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout);
-static HAL_StatusTypeDef FMPI2C_WaitOnFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
-static HAL_StatusTypeDef FMPI2C_WaitOnTXISFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout);
-static HAL_StatusTypeDef FMPI2C_WaitOnRXNEFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout);
-static HAL_StatusTypeDef FMPI2C_WaitOnSTOPFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout);
-static HAL_StatusTypeDef FMPI2C_IsAcknowledgeFailed(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout);
-
-static HAL_StatusTypeDef FMPI2C_MasterTransmit_ISR(FMPI2C_HandleTypeDef *hfmpi2c);
-static HAL_StatusTypeDef FMPI2C_MasterReceive_ISR(FMPI2C_HandleTypeDef *hfmpi2c);
-
-static HAL_StatusTypeDef FMPI2C_SlaveTransmit_ISR(FMPI2C_HandleTypeDef *hfmpi2c);
-static HAL_StatusTypeDef FMPI2C_SlaveReceive_ISR(FMPI2C_HandleTypeDef *hfmpi2c);
-
-static void FMPI2C_TransferConfig(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request);
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup FMPI2C_Exported_Functions FMPI2C Exported Functions
- * @{
- */
-
-/** @defgroup FMPI2C_Exported_Functions_Group1 Initialization/de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization/de-initialization functions #####
- ===============================================================================
- [..] This subsection provides a set of functions allowing to initialize and
- de-initialiaze the FMPI2Cx peripheral:
-
- (+) User must Implement HAL_FMPI2C_MspInit() function in which he configures
- all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
-
- (+) Call the function HAL_FMPI2C_Init() to configure the selected device with
- the selected configuration:
- (++) Clock Timing
- (++) Own Address 1
- (++) Addressing mode (Master, Slave)
- (++) Dual Addressing mode
- (++) Own Address 2
- (++) Own Address 2 Mask
- (++) General call mode
- (++) Nostretch mode
-
- (+) Call the function HAL_FMPI2C_DeInit() to restore the default configuration
- of the selected FMPI2Cx periperal.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the FMPI2C according to the specified parameters
- * in the FMPI2C_InitTypeDef and create the associated handle.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2C_Init(FMPI2C_HandleTypeDef *hfmpi2c)
-{
- /* Check the FMPI2C handle allocation */
- if(hfmpi2c == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
- assert_param(IS_FMPI2C_OWN_ADDRESS1(hfmpi2c->Init.OwnAddress1));
- assert_param(IS_FMPI2C_ADDRESSING_MODE(hfmpi2c->Init.AddressingMode));
- assert_param(IS_FMPI2C_DUAL_ADDRESS(hfmpi2c->Init.DualAddressMode));
- assert_param(IS_FMPI2C_OWN_ADDRESS2(hfmpi2c->Init.OwnAddress2));
- assert_param(IS_FMPI2C_OWN_ADDRESS2_MASK(hfmpi2c->Init.OwnAddress2Masks));
- assert_param(IS_FMPI2C_GENERAL_CALL(hfmpi2c->Init.GeneralCallMode));
- assert_param(IS_FMPI2C_NO_STRETCH(hfmpi2c->Init.NoStretchMode));
-
- if(hfmpi2c->State == HAL_FMPI2C_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hfmpi2c->Lock = HAL_UNLOCKED;
- /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
- HAL_FMPI2C_MspInit(hfmpi2c);
- }
-
- hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
-
- /* Disable the selected FMPI2C peripheral */
- __HAL_FMPI2C_DISABLE(hfmpi2c);
-
- /*---------------------------- FMPI2Cx TIMINGR Configuration ------------------*/
- /* Configure FMPI2Cx: Frequency range */
- hfmpi2c->Instance->TIMINGR = hfmpi2c->Init.Timing & TIMING_CLEAR_MASK;
-
- /*---------------------------- FMPI2Cx OAR1 Configuration ---------------------*/
- /* Configure FMPI2Cx: Own Address1 and ack own address1 mode */
- hfmpi2c->Instance->OAR1 &= ~FMPI2C_OAR1_OA1EN;
- if(hfmpi2c->Init.OwnAddress1 != 0)
- {
- if(hfmpi2c->Init.AddressingMode == FMPI2C_ADDRESSINGMODE_7BIT)
- {
- hfmpi2c->Instance->OAR1 = (FMPI2C_OAR1_OA1EN | hfmpi2c->Init.OwnAddress1);
- }
- else /* FMPI2C_ADDRESSINGMODE_10BIT */
- {
- hfmpi2c->Instance->OAR1 = (FMPI2C_OAR1_OA1EN | FMPI2C_OAR1_OA1MODE | hfmpi2c->Init.OwnAddress1);
- }
- }
-
- /*---------------------------- FMPI2Cx CR2 Configuration ----------------------*/
- /* Configure FMPI2Cx: Addressing Master mode */
- if(hfmpi2c->Init.AddressingMode == FMPI2C_ADDRESSINGMODE_10BIT)
- {
- hfmpi2c->Instance->CR2 = (FMPI2C_CR2_ADD10);
- }
- /* Enable the AUTOEND by default, and enable NACK (should be disable only during Slave process */
- hfmpi2c->Instance->CR2 |= (FMPI2C_CR2_AUTOEND | FMPI2C_CR2_NACK);
-
- /*---------------------------- FMPI2Cx OAR2 Configuration ---------------------*/
- /* Configure FMPI2Cx: Dual mode and Own Address2 */
- hfmpi2c->Instance->OAR2 = (hfmpi2c->Init.DualAddressMode | hfmpi2c->Init.OwnAddress2 | (hfmpi2c->Init.OwnAddress2Masks << 8));
-
- /*---------------------------- FMPI2Cx CR1 Configuration ----------------------*/
- /* Configure FMPI2Cx: Generalcall and NoStretch mode */
- hfmpi2c->Instance->CR1 = (hfmpi2c->Init.GeneralCallMode | hfmpi2c->Init.NoStretchMode);
-
- /* Enable the selected FMPI2C peripheral */
- __HAL_FMPI2C_ENABLE(hfmpi2c);
-
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the FMPI2C peripheral.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2C_DeInit(FMPI2C_HandleTypeDef *hfmpi2c)
-{
- /* Check the FMPI2C handle allocation */
- if(hfmpi2c == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
-
- hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
-
- /* Disable the FMPI2C Peripheral Clock */
- __HAL_FMPI2C_DISABLE(hfmpi2c);
-
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
- HAL_FMPI2C_MspDeInit(hfmpi2c);
-
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
- hfmpi2c->State = HAL_FMPI2C_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
-}
-
-/**
- * @brief FMPI2C MSP Init.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @retval None
- */
- __weak void HAL_FMPI2C_MspInit(FMPI2C_HandleTypeDef *hfmpi2c)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_FMPI2C_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief FMPI2C MSP DeInit
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @retval None
- */
- __weak void HAL_FMPI2C_MspDeInit(FMPI2C_HandleTypeDef *hfmpi2c)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_FMPI2C_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup FMPI2C_Exported_Functions_Group2 I/O operation functions
- * @brief Data transfers functions
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to manage the FMPI2C data
- transfers.
-
- (#) There is two mode of transfer:
- (++) Blocking mode : The communication is performed in the polling mode.
- The status of all data processing is returned by the same function
- after finishing transfer.
- (++) No-Blocking mode : The communication is performed using Interrupts
- or DMA. These functions return the status of the transfer startup.
- The end of the data processing will be indicated through the
- dedicated FMPI2C IRQ when using Interrupt mode or the DMA IRQ when
- using DMA mode.
-
- (#) Blocking mode functions are :
- (++) HAL_FMPI2C_Master_Transmit()
- (++) HAL_FMPI2C_Master_Receive()
- (++) HAL_FMPI2C_Slave_Transmit()
- (++) HAL_FMPI2C_Slave_Receive()
- (++) HAL_FMPI2C_Mem_Write()
- (++) HAL_FMPI2C_Mem_Read()
- (++) HAL_FMPI2C_IsDeviceReady()
-
- (#) No-Blocking mode functions with Interrupt are :
- (++) HAL_FMPI2C_Master_Transmit_IT()
- (++) HAL_FMPI2C_Master_Receive_IT()
- (++) HAL_FMPI2C_Slave_Transmit_IT()
- (++) HAL_FMPI2C_Slave_Receive_IT()
- (++) HAL_FMPI2C_Mem_Write_IT()
- (++) HAL_FMPI2C_Mem_Read_IT()
-
- (#) No-Blocking mode functions with DMA are :
- (++) HAL_FMPI2C_Master_Transmit_DMA()
- (++) HAL_FMPI2C_Master_Receive_DMA()
- (++) HAL_FMPI2C_Slave_Transmit_DMA()
- (++) HAL_FMPI2C_Slave_Receive_DMA()
- (++) HAL_FMPI2C_Mem_Write_DMA()
- (++) HAL_FMPI2C_Mem_Read_DMA()
-
- (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode:
- (++) HAL_FMPI2C_MemTxCpltCallback()
- (++) HAL_FMPI2C_MemRxCpltCallback()
- (++) HAL_FMPI2C_MasterTxCpltCallback()
- (++) HAL_FMPI2C_MasterRxCpltCallback()
- (++) HAL_FMPI2C_SlaveTxCpltCallback()
- (++) HAL_FMPI2C_SlaveRxCpltCallback()
- (++) HAL_FMPI2C_ErrorCallback()
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Transmits in master mode an amount of data in blocking mode.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param DevAddress: Target device address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- uint32_t sizetmp = 0;
-
- if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
- {
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_MASTER_BUSY_TX;
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
-
- /* Send Slave Address */
- /* Set NBYTES to write and reload if size > 255 and generate RESTART */
- /* Size > 255, need to set RELOAD bit */
- if(Size > 255)
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,255, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_WRITE);
- sizetmp = 255;
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,Size, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_WRITE);
- sizetmp = Size;
- }
-
- do
- {
- /* Wait until TXIS flag is set */
- if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
- /* Write data to TXDR */
- hfmpi2c->Instance->TXDR = (*pData++);
- sizetmp--;
- Size--;
-
- if((sizetmp == 0)&&(Size!=0))
- {
- /* Wait until TXE flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- if(Size > 255)
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,255, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
- sizetmp = 255;
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,Size, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
- sizetmp = Size;
- }
- }
-
- }while(Size > 0);
-
- /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
- /* Wait until STOPF flag is set */
- if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, Timeout) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Clear Configuration Register 2 */
- __HAL_FMPI2C_RESET_CR2(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receives in master mode an amount of data in blocking mode.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param DevAddress: Target device address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2C_Master_Receive(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- uint32_t sizetmp = 0;
-
- if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
- {
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_MASTER_BUSY_RX;
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
-
- /* Send Slave Address */
- /* Set NBYTES to write and reload if size > 255 and generate RESTART */
- /* Size > 255, need to set RELOAD bit */
- if(Size > 255)
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,255, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_READ);
- sizetmp = 255;
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,Size, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_READ);
- sizetmp = Size;
- }
-
- do
- {
- /* Wait until RXNE flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Write data to RXDR */
- (*pData++) =hfmpi2c->Instance->RXDR;
- sizetmp--;
- Size--;
-
- if((sizetmp == 0)&&(Size!=0))
- {
- /* Wait until TCR flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- if(Size > 255)
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,255, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
- sizetmp = 255;
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,Size, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
- sizetmp = Size;
- }
- }
-
- }while(Size > 0);
-
- /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
- /* Wait until STOPF flag is set */
- if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Clear Configuration Register 2 */
- __HAL_FMPI2C_RESET_CR2(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Transmits in slave mode an amount of data in blocking mode.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
- {
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_SLAVE_BUSY_RX;
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
-
- /* Enable Address Acknowledge */
- hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
-
- /* Wait until ADDR flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_ADDR, RESET, Timeout) != HAL_OK)
- {
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
- return HAL_TIMEOUT;
- }
-
- /* Clear ADDR flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
-
- /* If 10bit addressing mode is selected */
- if(hfmpi2c->Init.AddressingMode == FMPI2C_ADDRESSINGMODE_10BIT)
- {
- /* Wait until ADDR flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_ADDR, RESET, Timeout) != HAL_OK)
- {
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
- return HAL_TIMEOUT;
- }
-
- /* Clear ADDR flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
- }
-
- /* Wait until DIR flag is set Transmitter mode */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_DIR, RESET, Timeout) != HAL_OK)
- {
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
- return HAL_TIMEOUT;
- }
-
- do
- {
- /* Wait until TXIS flag is set */
- if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout) != HAL_OK)
- {
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
-
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Read data from TXDR */
- hfmpi2c->Instance->TXDR = (*pData++);
- Size--;
- }while(Size > 0);
-
- /* Wait until STOP flag is set */
- if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
- {
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
-
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- /* Normal use case for Transmitter mode */
- /* A NACK is generated to confirm the end of transfer */
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Clear STOP flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_STOPF);
-
- /* Wait until BUSY flag is reset */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, Timeout) != HAL_OK)
- {
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
- return HAL_TIMEOUT;
- }
-
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive in slave mode an amount of data in blocking mode
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
- {
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_SLAVE_BUSY_RX;
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
-
- /* Enable Address Acknowledge */
- hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
-
- /* Wait until ADDR flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_ADDR, RESET, Timeout) != HAL_OK)
- {
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
- return HAL_TIMEOUT;
- }
-
- /* Clear ADDR flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
-
- /* Wait until DIR flag is reset Receiver mode */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_DIR, SET, Timeout) != HAL_OK)
- {
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
- return HAL_TIMEOUT;
- }
-
- while(Size > 0)
- {
- /* Wait until RXNE flag is set */
- if(FMPI2C_WaitOnRXNEFlagUntilTimeout(hfmpi2c, Timeout) != HAL_OK)
- {
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_TIMEOUT)
- {
- return HAL_TIMEOUT;
- }
- else
- {
- return HAL_ERROR;
- }
- }
-
- /* Read data from RXDR */
- (*pData++) = hfmpi2c->Instance->RXDR;
- Size--;
- }
-
- /* Wait until STOP flag is set */
- if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
- {
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
-
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Clear STOP flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_STOPF);
-
- /* Wait until BUSY flag is reset */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, Timeout) != HAL_OK)
- {
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
- return HAL_TIMEOUT;
- }
-
-
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Transmit in master mode an amount of data in no-blocking mode with Interrupt
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param DevAddress: Target device address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
-{
- if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_MASTER_BUSY_TX;
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
-
- hfmpi2c->pBuffPtr = pData;
- hfmpi2c->XferCount = Size;
- if(Size > 255)
- {
- hfmpi2c->XferSize = 255;
- }
- else
- {
- hfmpi2c->XferSize = Size;
- }
-
- /* Send Slave Address */
- /* Set NBYTES to write and reload if size > 255 and generate RESTART */
- if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_WRITE);
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_WRITE);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- /* Note : The FMPI2C interrupts must be enabled after unlocking current process
- to avoid the risk of FMPI2C interrupt handle execution before current
- process unlock */
-
-
- /* Enable ERR, TC, STOP, NACK, TXI interrupt */
- /* possible to enable all of these */
- /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
- __HAL_FMPI2C_ENABLE_IT(hfmpi2c,FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_TXI );
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive in master mode an amount of data in no-blocking mode with Interrupt
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param DevAddress: Target device address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
-{
- if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_MASTER_BUSY_RX;
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
-
- hfmpi2c->pBuffPtr = pData;
- hfmpi2c->XferCount = Size;
- if(Size > 255)
- {
- hfmpi2c->XferSize = 255;
- }
- else
- {
- hfmpi2c->XferSize = Size;
- }
-
- /* Send Slave Address */
- /* Set NBYTES to write and reload if size > 255 and generate RESTART */
- if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_READ);
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_READ);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- /* Note : The FMPI2C interrupts must be enabled after unlocking current process
- to avoid the risk of FMPI2C interrupt handle execution before current
- process unlock */
-
- /* Enable ERR, TC, STOP, NACK, RXI interrupt */
- /* possible to enable all of these */
- /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
- __HAL_FMPI2C_ENABLE_IT(hfmpi2c,FMPI2C_IT_ERRI | FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_RXI );
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Transmit in slave mode an amount of data in no-blocking mode with Interrupt
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size)
-{
- if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_SLAVE_BUSY_TX;
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
-
- /* Enable Address Acknowledge */
- hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
-
- hfmpi2c->pBuffPtr = pData;
- hfmpi2c->XferSize = Size;
- hfmpi2c->XferCount = Size;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- /* Note : The FMPI2C interrupts must be enabled after unlocking current process
- to avoid the risk of FMPI2C interrupt handle execution before current
- process unlock */
-
- /* Enable ERR, TC, STOP, NACK, TXI interrupt */
- /* possible to enable all of these */
- /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
- __HAL_FMPI2C_ENABLE_IT(hfmpi2c,FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_TXI );
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive in slave mode an amount of data in no-blocking mode with Interrupt
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size)
-{
- if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_SLAVE_BUSY_RX;
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
-
- /* Enable Address Acknowledge */
- hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
-
- hfmpi2c->pBuffPtr = pData;
- hfmpi2c->XferSize = Size;
- hfmpi2c->XferCount = Size;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- /* Note : The FMPI2C interrupts must be enabled after unlocking current process
- to avoid the risk of FMPI2C interrupt handle execution before current
- process unlock */
-
- /* Enable ERR, TC, STOP, NACK, RXI interrupt */
- /* possible to enable all of these */
- /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
- __HAL_FMPI2C_ENABLE_IT(hfmpi2c,FMPI2C_IT_ERRI | FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Transmit in master mode an amount of data in no-blocking mode with DMA
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param DevAddress: Target device address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
-{
- if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_MASTER_BUSY_TX;
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
-
- hfmpi2c->pBuffPtr = pData;
- hfmpi2c->XferCount = Size;
- if(Size > 255)
- {
- hfmpi2c->XferSize = 255;
- }
- else
- {
- hfmpi2c->XferSize = Size;
- }
-
- /* Set the FMPI2C DMA transfer complete callback */
- hfmpi2c->hdmatx->XferCpltCallback = FMPI2C_DMAMasterTransmitCplt;
-
- /* Set the DMA error callback */
- hfmpi2c->hdmatx->XferErrorCallback = FMPI2C_DMAError;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)pData, (uint32_t)&hfmpi2c->Instance->TXDR, hfmpi2c->XferSize);
-
- /* Send Slave Address */
- /* Set NBYTES to write and reload if size > 255 and generate RESTART */
- if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_WRITE);
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_WRITE);
- }
-
- /* Wait until TXIS flag is set */
- if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_TXIS) != HAL_OK)
- {
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
-
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
-
- /* Enable DMA Request */
- hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive in master mode an amount of data in no-blocking mode with DMA
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param DevAddress: Target device address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
-{
- if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_MASTER_BUSY_RX;
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
-
- hfmpi2c->pBuffPtr = pData;
- hfmpi2c->XferCount = Size;
- if(Size > 255)
- {
- hfmpi2c->XferSize = 255;
- }
- else
- {
- hfmpi2c->XferSize = Size;
- }
-
- /* Set the FMPI2C DMA transfer complete callback */
- hfmpi2c->hdmarx->XferCpltCallback = FMPI2C_DMAMasterReceiveCplt;
-
- /* Set the DMA error callback */
- hfmpi2c->hdmarx->XferErrorCallback = FMPI2C_DMAError;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)pData, hfmpi2c->XferSize);
-
- /* Send Slave Address */
- /* Set NBYTES to write and reload if size > 255 and generate RESTART */
- if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_READ);
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_READ);
- }
-
- /* Wait until RXNE flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_RXNE, RESET, FMPI2C_TIMEOUT_RXNE) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
-
- /* Enable DMA Request */
- hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Transmit in slave mode an amount of data in no-blocking mode with DMA
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size)
-{
- if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_SLAVE_BUSY_TX;
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
-
- hfmpi2c->pBuffPtr = pData;
- hfmpi2c->XferCount = Size;
- hfmpi2c->XferSize = Size;
-
- /* Set the FMPI2C DMA transfer complete callback */
- hfmpi2c->hdmatx->XferCpltCallback = FMPI2C_DMASlaveTransmitCplt;
-
- /* Set the DMA error callback */
- hfmpi2c->hdmatx->XferErrorCallback = FMPI2C_DMAError;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)pData, (uint32_t)&hfmpi2c->Instance->TXDR, hfmpi2c->XferSize);
-
- /* Enable Address Acknowledge */
- hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
-
- /* Wait until ADDR flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_ADDR, RESET, FMPI2C_TIMEOUT_ADDR) != HAL_OK)
- {
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
- return HAL_TIMEOUT;
- }
-
- /* Clear ADDR flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
-
- /* If 10bits addressing mode is selected */
- if(hfmpi2c->Init.AddressingMode == FMPI2C_ADDRESSINGMODE_10BIT)
- {
- /* Wait until ADDR flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_ADDR, RESET, FMPI2C_TIMEOUT_ADDR) != HAL_OK)
- {
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
- return HAL_TIMEOUT;
- }
-
- /* Clear ADDR flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
- }
-
- /* Wait until DIR flag is set Transmitter mode */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_DIR, RESET, FMPI2C_TIMEOUT_BUSY) != HAL_OK)
- {
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
- return HAL_TIMEOUT;
- }
-
- /* Enable DMA Request */
- hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive in slave mode an amount of data in no-blocking mode with DMA
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint8_t *pData, uint16_t Size)
-{
- if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_SLAVE_BUSY_RX;
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
-
- hfmpi2c->pBuffPtr = pData;
- hfmpi2c->XferSize = Size;
- hfmpi2c->XferCount = Size;
-
- /* Set the FMPI2C DMA transfer complete callback */
- hfmpi2c->hdmarx->XferCpltCallback = FMPI2C_DMASlaveReceiveCplt;
-
- /* Set the DMA error callback */
- hfmpi2c->hdmarx->XferErrorCallback = FMPI2C_DMAError;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)pData, Size);
-
- /* Enable Address Acknowledge */
- hfmpi2c->Instance->CR2 &= ~FMPI2C_CR2_NACK;
-
- /* Wait until ADDR flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_ADDR, RESET, FMPI2C_TIMEOUT_ADDR) != HAL_OK)
- {
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
- return HAL_TIMEOUT;
- }
-
- /* Clear ADDR flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_ADDR);
-
- /* Wait until DIR flag is set Receiver mode */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_DIR, SET, FMPI2C_TIMEOUT_DIR) != HAL_OK)
- {
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
- return HAL_TIMEOUT;
- }
-
- /* Enable DMA Request */
- hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-/**
- * @brief Write an amount of data in blocking mode to a specific memory address
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param DevAddress: Target device address
- * @param MemAddress: Internal memory address
- * @param MemAddSize: Size of internal memory address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2C_Mem_Write(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- uint32_t Sizetmp = 0;
-
- /* Check the parameters */
- assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
-
- if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_MEM_BUSY_TX;
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
-
- /* Send Slave Address and Memory Address */
- if(FMPI2C_RequestMemoryWrite(hfmpi2c, DevAddress, MemAddress, MemAddSize, Timeout) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
- return HAL_ERROR;
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
- return HAL_TIMEOUT;
- }
- }
-
- /* Set NBYTES to write and reload if size > 255 */
- /* Size > 255, need to set RELOAD bit */
- if(Size > 255)
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,255, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
- Sizetmp = 255;
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,Size, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
- Sizetmp = Size;
- }
-
- do
- {
- /* Wait until TXIS flag is set */
- if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Write data to DR */
- hfmpi2c->Instance->TXDR = (*pData++);
- Sizetmp--;
- Size--;
-
- if((Sizetmp == 0)&&(Size!=0))
- {
- /* Wait until TCR flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
-
- if(Size > 255)
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,255, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
- Sizetmp = 255;
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,Size, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
- Sizetmp = Size;
- }
- }
-
- }while(Size > 0);
-
- /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
- /* Wait until STOPF flag is reset */
- if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Clear Configuration Register 2 */
- __HAL_FMPI2C_RESET_CR2(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Read an amount of data in blocking mode from a specific memory address
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param DevAddress: Target device address
- * @param MemAddress: Internal memory address
- * @param MemAddSize: Size of internal memory address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2C_Mem_Read(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- uint32_t Sizetmp = 0;
-
- /* Check the parameters */
- assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
-
- if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_MEM_BUSY_RX;
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
-
- /* Send Slave Address and Memory Address */
- if(FMPI2C_RequestMemoryRead(hfmpi2c, DevAddress, MemAddress, MemAddSize, Timeout) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
- return HAL_ERROR;
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
- return HAL_TIMEOUT;
- }
- }
-
- /* Send Slave Address */
- /* Set NBYTES to write and reload if size > 255 and generate RESTART */
- /* Size > 255, need to set RELOAD bit */
- if(Size > 255)
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,255, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_READ);
- Sizetmp = 255;
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,Size, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_READ);
- Sizetmp = Size;
- }
-
- do
- {
- /* Wait until RXNE flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Read data from RXDR */
- (*pData++) = hfmpi2c->Instance->RXDR;
-
- /* Decrement the Size counter */
- Sizetmp--;
- Size--;
-
- if((Sizetmp == 0)&&(Size!=0))
- {
- /* Wait until TCR flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- if(Size > 255)
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,255, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
- Sizetmp = 255;
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,Size, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
- Sizetmp = Size;
- }
- }
-
- }while(Size > 0);
-
- /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
- /* Wait until STOPF flag is reset */
- if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Clear Configuration Register 2 */
- __HAL_FMPI2C_RESET_CR2(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-/**
- * @brief Write an amount of data in no-blocking mode with Interrupt to a specific memory address
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param DevAddress: Target device address
- * @param MemAddress: Internal memory address
- * @param MemAddSize: Size of internal memory address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
-{
- /* Check the parameters */
- assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
-
- if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_MEM_BUSY_TX;
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
-
- hfmpi2c->pBuffPtr = pData;
- hfmpi2c->XferCount = Size;
- if(Size > 255)
- {
- hfmpi2c->XferSize = 255;
- }
- else
- {
- hfmpi2c->XferSize = Size;
- }
-
- /* Send Slave Address and Memory Address */
- if(FMPI2C_RequestMemoryWrite(hfmpi2c, DevAddress, MemAddress, MemAddSize, FMPI2C_TIMEOUT_FLAG) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
- return HAL_ERROR;
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
- return HAL_TIMEOUT;
- }
- }
-
- /* Set NBYTES to write and reload if size > 255 */
- /* Size > 255, need to set RELOAD bit */
- if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- /* Note : The FMPI2C interrupts must be enabled after unlocking current process
- to avoid the risk of FMPI2C interrupt handle execution before current
- process unlock */
-
- /* Enable ERR, TC, STOP, NACK, TXI interrupt */
- /* possible to enable all of these */
- /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
- __HAL_FMPI2C_ENABLE_IT(hfmpi2c,FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_TXI );
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Read an amount of data in no-blocking mode with Interrupt from a specific memory address
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param DevAddress: Target device address
- * @param MemAddress: Internal memory address
- * @param MemAddSize: Size of internal memory address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_IT(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
-{
- /* Check the parameters */
- assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
-
- if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_MEM_BUSY_RX;
-
- hfmpi2c->pBuffPtr = pData;
- hfmpi2c->XferCount = Size;
- if(Size > 255)
- {
- hfmpi2c->XferSize = 255;
- }
- else
- {
- hfmpi2c->XferSize = Size;
- }
-
- /* Send Slave Address and Memory Address */
- if(FMPI2C_RequestMemoryRead(hfmpi2c, DevAddress, MemAddress, MemAddSize, FMPI2C_TIMEOUT_FLAG) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
- return HAL_ERROR;
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
- return HAL_TIMEOUT;
- }
- }
-
- /* Set NBYTES to write and reload if size > 255 and generate RESTART */
- /* Size > 255, need to set RELOAD bit */
- if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_READ);
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_READ);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- /* Note : The FMPI2C interrupts must be enabled after unlocking current process
- to avoid the risk of FMPI2C interrupt handle execution before current
- process unlock */
-
- /* Enable ERR, TC, STOP, NACK, RXI interrupt */
- /* possible to enable all of these */
- /* FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI */
- __HAL_FMPI2C_ENABLE_IT(hfmpi2c, FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_RXI );
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-/**
- * @brief Write an amount of data in no-blocking mode with DMA to a specific memory address
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param DevAddress: Target device address
- * @param MemAddress: Internal memory address
- * @param MemAddSize: Size of internal memory address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
-{
- /* Check the parameters */
- assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
-
- if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_MEM_BUSY_TX;
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
-
- hfmpi2c->pBuffPtr = pData;
- hfmpi2c->XferCount = Size;
- if(Size > 255)
- {
- hfmpi2c->XferSize = 255;
- }
- else
- {
- hfmpi2c->XferSize = Size;
- }
-
- /* Set the FMPI2C DMA transfer complete callback */
- hfmpi2c->hdmatx->XferCpltCallback = FMPI2C_DMAMemTransmitCplt;
-
- /* Set the DMA error callback */
- hfmpi2c->hdmatx->XferErrorCallback = FMPI2C_DMAError;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)pData, (uint32_t)&hfmpi2c->Instance->TXDR, hfmpi2c->XferSize);
-
- /* Send Slave Address and Memory Address */
- if(FMPI2C_RequestMemoryWrite(hfmpi2c, DevAddress, MemAddress, MemAddSize, FMPI2C_TIMEOUT_FLAG) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
- return HAL_ERROR;
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
- return HAL_TIMEOUT;
- }
- }
-
- /* Send Slave Address */
- /* Set NBYTES to write and reload if size > 255 */
- if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
- }
-
- /* Wait until TXIS flag is set */
- if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_TXIS) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Enable DMA Request */
- hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Reads an amount of data in no-blocking mode with DMA from a specific memory address.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param DevAddress: Target device address
- * @param MemAddress: Internal memory address
- * @param MemAddSize: Size of internal memory address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be read
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_DMA(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
-{
- /* Check the parameters */
- assert_param(IS_FMPI2C_MEMADD_SIZE(MemAddSize));
-
- if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_MEM_BUSY_RX;
-
- hfmpi2c->pBuffPtr = pData;
- hfmpi2c->XferCount = Size;
- if(Size > 255)
- {
- hfmpi2c->XferSize = 255;
- }
- else
- {
- hfmpi2c->XferSize = Size;
- }
-
- /* Set the FMPI2C DMA transfer complete callback */
- hfmpi2c->hdmarx->XferCpltCallback = FMPI2C_DMAMemReceiveCplt;
-
- /* Set the DMA error callback */
- hfmpi2c->hdmarx->XferErrorCallback = FMPI2C_DMAError;
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)pData, hfmpi2c->XferSize);
-
- /* Send Slave Address and Memory Address */
- if(FMPI2C_RequestMemoryRead(hfmpi2c, DevAddress, MemAddress, MemAddSize, FMPI2C_TIMEOUT_FLAG) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
- return HAL_ERROR;
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
- return HAL_TIMEOUT;
- }
- }
-
- /* Set NBYTES to write and reload if size > 255 and generate RESTART */
- if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_READ);
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_GENERATE_START_READ);
- }
-
- /* Wait until RXNE flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_RXNE, RESET, FMPI2C_TIMEOUT_RXNE) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Enable DMA Request */
- hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Checks if target device is ready for communication.
- * @note This function is used with Memory devices
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param DevAddress: Target device address
- * @param Trials: Number of trials
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2C_IsDeviceReady(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- __IO uint32_t FMPI2C_Trials = 0;
-
- if(hfmpi2c->State == HAL_FMPI2C_STATE_READY)
- {
- if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BUSY) == SET)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
-
- do
- {
- /* Generate Start */
- hfmpi2c->Instance->CR2 = __HAL_FMPI2C_GENERATE_START(hfmpi2c->Init.AddressingMode,DevAddress);
-
- /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
- /* Wait until STOPF flag is set or a NACK flag is set*/
- tickstart = HAL_GetTick();
- while((__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == RESET) && (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == RESET) && (hfmpi2c->State != HAL_FMPI2C_STATE_TIMEOUT))
- {
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Device is ready */
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Check if the NACKF flag has not been set */
- if (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == RESET)
- {
- /* Wait until STOPF flag is reset */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_STOPF, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Device is ready */
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
- }
- else
- {
- /* Wait until STOPF flag is reset */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_STOPF, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Clear NACK Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
-
- /* Clear STOP Flag, auto generated with autoend*/
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
- }
-
- /* Check if the maximum allowed number of trials has been reached */
- if (FMPI2C_Trials++ == Trials)
- {
- /* Generate Stop */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_STOP;
-
- /* Wait until STOPF flag is reset */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_STOPF, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
- }
- }while(FMPI2C_Trials < Trials);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_TIMEOUT;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief This function handles FMPI2C event interrupt request.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @retval None
- */
-void HAL_FMPI2C_EV_IRQHandler(FMPI2C_HandleTypeDef *hfmpi2c)
-{
- /* FMPI2C in mode Transmitter ---------------------------------------------------*/
- if (((__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TXIS) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TCR) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TC) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR) == SET)) && (__HAL_FMPI2C_GET_IT_SOURCE(hfmpi2c, (FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_TXI | FMPI2C_IT_ADDRI)) == SET))
- {
- /* Slave mode selected */
- if (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_TX)
- {
- FMPI2C_SlaveTransmit_ISR(hfmpi2c);
- }
- }
-
- if (((__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TXIS) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TCR) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TC) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == SET)) && (__HAL_FMPI2C_GET_IT_SOURCE(hfmpi2c, (FMPI2C_IT_TCI | FMPI2C_IT_STOPI | FMPI2C_IT_NACKI | FMPI2C_IT_TXI)) == SET))
- {
- /* Master mode selected */
- if ((hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MEM_BUSY_TX))
- {
- FMPI2C_MasterTransmit_ISR(hfmpi2c);
- }
- }
-
- /* FMPI2C in mode Receiver ----------------------------------------------------*/
- if (((__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_RXNE) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TCR) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TC) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR) == SET)) && (__HAL_FMPI2C_GET_IT_SOURCE(hfmpi2c, (FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_RXI | FMPI2C_IT_ADDRI)) == SET))
- {
- /* Slave mode selected */
- if (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_RX)
- {
- FMPI2C_SlaveReceive_ISR(hfmpi2c);
- }
- }
- if (((__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_RXNE) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TCR) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TC) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == SET) || (__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == SET)) && (__HAL_FMPI2C_GET_IT_SOURCE(hfmpi2c, (FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_RXI)) == SET))
- {
- /* Master mode selected */
- if ((hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_RX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MEM_BUSY_RX))
- {
- FMPI2C_MasterReceive_ISR(hfmpi2c);
- }
- }
-}
-
-/**
- * @brief This function handles FMPI2C error interrupt request.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @retval None
- */
-void HAL_FMPI2C_ER_IRQHandler(FMPI2C_HandleTypeDef *hfmpi2c)
-{
- /* FMPI2C Bus error interrupt occurred ------------------------------------*/
- if((__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_BERR) == SET) && (__HAL_FMPI2C_GET_IT_SOURCE(hfmpi2c, FMPI2C_IT_ERRI) == SET))
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_BERR;
-
- /* Clear BERR flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_BERR);
- }
-
- /* FMPI2C Over-Run/Under-Run interrupt occurred ----------------------------------------*/
- if((__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_OVR) == SET) && (__HAL_FMPI2C_GET_IT_SOURCE(hfmpi2c, FMPI2C_IT_ERRI) == SET))
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_OVR;
-
- /* Clear OVR flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_OVR);
- }
-
- /* FMPI2C Arbitration Loss error interrupt occurred -------------------------------------*/
- if((__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_ARLO) == SET) && (__HAL_FMPI2C_GET_IT_SOURCE(hfmpi2c, FMPI2C_IT_ERRI) == SET))
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_ARLO;
-
- /* Clear ARLO flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ARLO);
- }
-
- /* Call the Error Callback in case of Error detected */
- if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
- {
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
-}
-
-/**
- * @brief Master Tx Transfer completed callbacks.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @retval None
- */
- __weak void HAL_FMPI2C_MasterTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_FMPI2C_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Master Rx Transfer completed callbacks.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @retval None
- */
-__weak void HAL_FMPI2C_MasterRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_FMPI2C_TxCpltCallback could be implemented in the user file
- */
-}
-
-/** @brief Slave Tx Transfer completed callbacks.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @retval None
- */
- __weak void HAL_FMPI2C_SlaveTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_FMPI2C_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Slave Rx Transfer completed callbacks.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @retval None
- */
-__weak void HAL_FMPI2C_SlaveRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_FMPI2C_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Memory Tx Transfer completed callbacks.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @retval None
- */
- __weak void HAL_FMPI2C_MemTxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_FMPI2C_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Memory Rx Transfer completed callbacks.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @retval None
- */
-__weak void HAL_FMPI2C_MemRxCpltCallback(FMPI2C_HandleTypeDef *hfmpi2c)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_FMPI2C_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief FMPI2C error callbacks.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @retval None
- */
- __weak void HAL_FMPI2C_ErrorCallback(FMPI2C_HandleTypeDef *hfmpi2c)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_FMPI2C_ErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup FMPI2C_Exported_Functions_Group3 Peripheral State and Errors functions
- * @brief Peripheral State and Errors functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral State and Errors functions #####
- ===============================================================================
- [..]
- This subsection permit to get in run-time the status of the peripheral
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Returns the FMPI2C state.
- * @param hfmpi2c : FMPI2C handle
- * @retval HAL state
- */
-HAL_FMPI2C_StateTypeDef HAL_FMPI2C_GetState(FMPI2C_HandleTypeDef *hfmpi2c)
-{
- return hfmpi2c->State;
-}
-
-/**
-* @brief Return the FMPI2C error code
-* @param hfmpi2c : pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
-* @retval FMPI2C Error Code
-*/
-uint32_t HAL_FMPI2C_GetError(FMPI2C_HandleTypeDef *hfmpi2c)
-{
- return hfmpi2c->ErrorCode;
-}
-
-/**
- * @}
- */
-
-/**
- * @brief Handle Interrupt Flags Master Transmit Mode
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @retval HAL status
- */
-static HAL_StatusTypeDef FMPI2C_MasterTransmit_ISR(FMPI2C_HandleTypeDef *hfmpi2c)
-{
- uint16_t DevAddress;
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TXIS) == SET)
- {
- /* Write data to TXDR */
- hfmpi2c->Instance->TXDR = (*hfmpi2c->pBuffPtr++);
- hfmpi2c->XferSize--;
- hfmpi2c->XferCount--;
- }
- else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TCR) == SET)
- {
- if((hfmpi2c->XferSize == 0)&&(hfmpi2c->XferCount!=0))
- {
- DevAddress = (hfmpi2c->Instance->CR2 & FMPI2C_CR2_SADD);
-
- if(hfmpi2c->XferCount > 255)
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,255, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
- hfmpi2c->XferSize = 255;
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferCount, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
- hfmpi2c->XferSize = hfmpi2c->XferCount;
- }
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- /* Wrong size Status regarding TCR flag event */
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_SIZE;
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
- }
- else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TC) == SET)
- {
- if(hfmpi2c->XferCount == 0)
- {
- /* Generate Stop */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_STOP;
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- /* Wrong size Status regarding TCR flag event */
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_SIZE;
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
- }
- else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == SET)
- {
- /* Disable ERR, TC, STOP, NACK, TXI interrupt */
- __HAL_FMPI2C_DISABLE_IT(hfmpi2c,FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_TXI );
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Clear Configuration Register 2 */
- __HAL_FMPI2C_RESET_CR2(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- if(hfmpi2c->State == HAL_FMPI2C_STATE_MEM_BUSY_TX)
- {
- HAL_FMPI2C_MemTxCpltCallback(hfmpi2c);
- }
- else
- {
- HAL_FMPI2C_MasterTxCpltCallback(hfmpi2c);
- }
- }
- else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == SET)
- {
- /* Clear NACK Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
-}
-
-/**
- * @brief Handle Interrupt Flags Master Receive Mode
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @retval HAL status
- */
-static HAL_StatusTypeDef FMPI2C_MasterReceive_ISR(FMPI2C_HandleTypeDef *hfmpi2c)
-{
- uint16_t DevAddress;
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_RXNE) == SET)
- {
- /* Read data from RXDR */
- (*hfmpi2c->pBuffPtr++) = hfmpi2c->Instance->RXDR;
- hfmpi2c->XferSize--;
- hfmpi2c->XferCount--;
- }
- else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TCR) == SET)
- {
- if((hfmpi2c->XferSize == 0)&&(hfmpi2c->XferCount!=0))
- {
- DevAddress = (hfmpi2c->Instance->CR2 & FMPI2C_CR2_SADD);
-
- if(hfmpi2c->XferCount > 255)
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,255, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
- hfmpi2c->XferSize = 255;
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferCount, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
- hfmpi2c->XferSize = hfmpi2c->XferCount;
- }
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- /* Wrong size Status regarding TCR flag event */
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_SIZE;
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
- }
- else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TC) == SET)
- {
- if(hfmpi2c->XferCount == 0)
- {
- /* Generate Stop */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_STOP;
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- /* Wrong size Status regarding TCR flag event */
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_SIZE;
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
- }
- else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == SET)
- {
- /* Disable ERR, TC, STOP, NACK, TXI interrupt */
- __HAL_FMPI2C_DISABLE_IT(hfmpi2c,FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_RXI );
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Clear Configuration Register 2 */
- __HAL_FMPI2C_RESET_CR2(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- if(hfmpi2c->State == HAL_FMPI2C_STATE_MEM_BUSY_RX)
- {
- HAL_FMPI2C_MemRxCpltCallback(hfmpi2c);
- }
- else
- {
- HAL_FMPI2C_MasterRxCpltCallback(hfmpi2c);
- }
- }
- else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == SET)
- {
- /* Clear NACK Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
-
-}
-
-/**
- * @brief Handle Interrupt Flags Slave Transmit Mode
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @retval HAL status
- */
-static HAL_StatusTypeDef FMPI2C_SlaveTransmit_ISR(FMPI2C_HandleTypeDef *hfmpi2c)
-{
- /* Process locked */
- __HAL_LOCK(hfmpi2c);
-
- if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) != RESET)
- {
- /* Check that FMPI2C transfer finished */
- /* if yes, normal usecase, a NACK is sent by the MASTER when Transfer is finished */
- /* Mean XferCount == 0*/
- /* So clear Flag NACKF only */
- if(hfmpi2c->XferCount == 0)
- {
- /* Clear NACK Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
- }
- else
- {
- /* if no, error usecase, a Non-Acknowledge of last Data is generated by the MASTER*/
- /* Clear NACK Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
-
- /* Set ErrorCode corresponding to a Non-Acknowledge */
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- /* Call the Error callback to prevent upper layer */
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
- }
- else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR) == SET)
- {
- /* Clear ADDR flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR);
- }
- /* Check first if STOPF is set */
- /* to prevent a Write Data in TX buffer */
- /* which is stuck in TXDR until next */
- /* communication with Master */
- else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == SET)
- {
- /* Disable ERRI, TCI, STOPI, NACKI, ADDRI, RXI, TXI interrupt */
- __HAL_FMPI2C_DISABLE_IT(hfmpi2c,FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_TXI );
-
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- HAL_FMPI2C_SlaveTxCpltCallback(hfmpi2c);
- }
- else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TXIS) == SET)
- {
- /* Write data to TXDR only if XferCount not reach "0" */
- /* A TXIS flag can be set, during STOP treatment */
- if(hfmpi2c->XferCount > 0)
- {
- /* Write data to TXDR */
- hfmpi2c->Instance->TXDR = (*hfmpi2c->pBuffPtr++);
- hfmpi2c->XferCount--;
- }
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
-}
-
-/**
- * @brief Handle Interrupt Flags Slave Receive Mode
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @retval HAL status
- */
-static HAL_StatusTypeDef FMPI2C_SlaveReceive_ISR(FMPI2C_HandleTypeDef *hfmpi2c)
-{
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) != RESET)
- {
- /* Clear NACK Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
- else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR) == SET)
- {
- /* Clear ADDR flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_ADDR);
- }
- else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_RXNE) == SET)
- {
- /* Read data from RXDR */
- (*hfmpi2c->pBuffPtr++) = hfmpi2c->Instance->RXDR;
- hfmpi2c->XferSize--;
- hfmpi2c->XferCount--;
- }
- else if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == SET)
- {
- /* Disable ERRI, TCI, STOPI, NACKI, ADDRI, RXI, TXI interrupt */
- __HAL_FMPI2C_DISABLE_IT(hfmpi2c,FMPI2C_IT_ERRI | FMPI2C_IT_TCI| FMPI2C_IT_STOPI| FMPI2C_IT_NACKI | FMPI2C_IT_ADDRI | FMPI2C_IT_RXI | FMPI2C_IT_RXI );
-
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- HAL_FMPI2C_SlaveRxCpltCallback(hfmpi2c);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
-}
-
-/**
- * @brief Master sends target device address followed by internal memory address for write request.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param DevAddress: Target device address
- * @param MemAddress: Internal memory address
- * @param MemAddSize: Size of internal memory address
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-static HAL_StatusTypeDef FMPI2C_RequestMemoryWrite(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout)
-{
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,MemAddSize, FMPI2C_RELOAD_MODE, FMPI2C_GENERATE_START_WRITE);
-
- /* Wait until TXIS flag is set */
- if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* If Memory address size is 8Bit */
- if(MemAddSize == FMPI2C_MEMADD_SIZE_8BIT)
- {
- /* Send Memory Address */
- hfmpi2c->Instance->TXDR = __HAL_FMPI2C_MEM_ADD_LSB(MemAddress);
- }
- /* If Memory address size is 16Bit */
- else
- {
- /* Send MSB of Memory Address */
- hfmpi2c->Instance->TXDR = __HAL_FMPI2C_MEM_ADD_MSB(MemAddress);
-
- /* Wait until TXIS flag is set */
- if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Send LSB of Memory Address */
- hfmpi2c->Instance->TXDR = __HAL_FMPI2C_MEM_ADD_LSB(MemAddress);
- }
-
- /* Wait until TCR flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
-return HAL_OK;
-}
-
-/**
- * @brief Master sends target device address followed by internal memory address for read request.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param DevAddress: Target device address
- * @param MemAddress: Internal memory address
- * @param MemAddSize: Size of internal memory address
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-static HAL_StatusTypeDef FMPI2C_RequestMemoryRead(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout)
-{
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,MemAddSize, FMPI2C_SOFTEND_MODE, FMPI2C_GENERATE_START_WRITE);
-
- /* Wait until TXIS flag is set */
- if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* If Memory address size is 8Bit */
- if(MemAddSize == FMPI2C_MEMADD_SIZE_8BIT)
- {
- /* Send Memory Address */
- hfmpi2c->Instance->TXDR = __HAL_FMPI2C_MEM_ADD_LSB(MemAddress);
- }
- /* If Mememory address size is 16Bit */
- else
- {
- /* Send MSB of Memory Address */
- hfmpi2c->Instance->TXDR = __HAL_FMPI2C_MEM_ADD_MSB(MemAddress);
-
- /* Wait until TXIS flag is set */
- if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, Timeout) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Send LSB of Memory Address */
- hfmpi2c->Instance->TXDR = __HAL_FMPI2C_MEM_ADD_LSB(MemAddress);
- }
-
- /* Wait until TC flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TC, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- return HAL_OK;
-}
-
-
-/**
- * @brief DMA FMPI2C master transmit process complete callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void FMPI2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma)
-{
- uint16_t DevAddress;
- FMPI2C_HandleTypeDef* hfmpi2c = (FMPI2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- /* Check if last DMA request was done with RELOAD */
- /* Set NBYTES to write and reload if size > 255 */
- if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
- {
- /* Wait until TCR flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, FMPI2C_TIMEOUT_TCR) != HAL_OK)
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
-
- /* Disable DMA Request */
- hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN;
-
- /* Check if Errors has been detected during transfer */
- if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
- {
- /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
- /* Wait until STOPF flag is reset */
- if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
- }
- else
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
- }
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Clear Configuration Register 2 */
- __HAL_FMPI2C_RESET_CR2(hfmpi2c);
-
- hfmpi2c->XferCount = 0;
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
- else
- {
- hfmpi2c->pBuffPtr += hfmpi2c->XferSize;
- hfmpi2c->XferCount -= hfmpi2c->XferSize;
- if(hfmpi2c->XferCount > 255)
- {
- hfmpi2c->XferSize = 255;
- }
- else
- {
- hfmpi2c->XferSize = hfmpi2c->XferCount;
- }
-
- DevAddress = (hfmpi2c->Instance->CR2 & FMPI2C_CR2_SADD);
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)hfmpi2c->pBuffPtr, (uint32_t)&hfmpi2c->Instance->TXDR, hfmpi2c->XferSize);
-
- /* Send Slave Address */
- /* Set NBYTES to write and reload if size > 255 */
- if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
- }
-
- /* Wait until TXIS flag is set */
- if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_TXIS) != HAL_OK)
- {
- /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
- /* Wait until STOPF flag is reset */
- if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
- }
- else
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
- }
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Clear Configuration Register 2 */
- __HAL_FMPI2C_RESET_CR2(hfmpi2c);
-
- hfmpi2c->XferCount = 0;
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
- else
- {
- /* Enable DMA Request */
- hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN;
- }
- }
- }
- else
- {
- /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
- /* Wait until STOPF flag is reset */
- if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
- }
- else
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
- }
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Clear Configuration Register 2 */
- __HAL_FMPI2C_RESET_CR2(hfmpi2c);
-
- /* Disable DMA Request */
- hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN;
-
- hfmpi2c->XferCount = 0;
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Check if Errors has been detected during transfer */
- if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
- {
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
- else
- {
- HAL_FMPI2C_MasterTxCpltCallback(hfmpi2c);
- }
- }
-}
-
-/**
- * @brief DMA FMPI2C slave transmit process complete callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void FMPI2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma)
-{
- FMPI2C_HandleTypeDef* hfmpi2c = (FMPI2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- /* Wait until STOP flag is set */
- if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- /* Normal Use case, a AF is generated by master */
- /* to inform slave the end of transfer */
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
- }
- else
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
- }
-
- /* Clear STOP flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c,FMPI2C_FLAG_STOPF);
-
- /* Wait until BUSY flag is reset */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, FMPI2C_TIMEOUT_BUSY) != HAL_OK)
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
-
- /* Disable DMA Request */
- hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN;
-
- hfmpi2c->XferCount = 0;
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Check if Errors has been detected during transfer */
- if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
- {
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
- else
- {
- HAL_FMPI2C_SlaveTxCpltCallback(hfmpi2c);
- }
-}
-
-/**
- * @brief DMA FMPI2C master receive process complete callback
- * @param hdma: DMA handle
- * @retval None
- */
-static void FMPI2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma)
-{
- FMPI2C_HandleTypeDef* hfmpi2c = (FMPI2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
- uint16_t DevAddress;
-
- /* Check if last DMA request was done with RELOAD */
- /* Set NBYTES to write and reload if size > 255 */
- if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
- {
- /* Wait until TCR flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, FMPI2C_TIMEOUT_TCR) != HAL_OK)
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
-
- /* Disable DMA Request */
- hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN;
-
- /* Check if Errors has been detected during transfer */
- if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
- {
- /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
- /* Wait until STOPF flag is reset */
- if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
- }
- else
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
- }
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Clear Configuration Register 2 */
- __HAL_FMPI2C_RESET_CR2(hfmpi2c);
-
- hfmpi2c->XferCount = 0;
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
- else
- {
- hfmpi2c->pBuffPtr += hfmpi2c->XferSize;
- hfmpi2c->XferCount -= hfmpi2c->XferSize;
- if(hfmpi2c->XferCount > 255)
- {
- hfmpi2c->XferSize = 255;
- }
- else
- {
- hfmpi2c->XferSize = hfmpi2c->XferCount;
- }
-
- DevAddress = (hfmpi2c->Instance->CR2 & FMPI2C_CR2_SADD);
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)hfmpi2c->pBuffPtr, hfmpi2c->XferSize);
-
- /* Send Slave Address */
- /* Set NBYTES to write and reload if size > 255 */
- if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
- }
-
- /* Wait until RXNE flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_RXNE, RESET, FMPI2C_TIMEOUT_RXNE) != HAL_OK)
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
-
- /* Check if Errors has been detected during transfer */
- if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
- {
- /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
- /* Wait until STOPF flag is reset */
- if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
- }
- else
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
- }
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Clear Configuration Register 2 */
- __HAL_FMPI2C_RESET_CR2(hfmpi2c);
-
- hfmpi2c->XferCount = 0;
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
- else
- {
- /* Enable DMA Request */
- hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN;
- }
- }
- }
- else
- {
- /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
- /* Wait until STOPF flag is reset */
- if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
- }
- else
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
- }
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Clear Configuration Register 2 */
- __HAL_FMPI2C_RESET_CR2(hfmpi2c);
-
- /* Disable DMA Request */
- hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN;
-
- hfmpi2c->XferCount = 0;
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Check if Errors has been detected during transfer */
- if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
- {
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
- else
- {
- HAL_FMPI2C_MasterRxCpltCallback(hfmpi2c);
- }
- }
-}
-
-/**
- * @brief DMA FMPI2C slave receive process complete callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void FMPI2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma)
-{
- FMPI2C_HandleTypeDef* hfmpi2c = (FMPI2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- /* Wait until STOPF flag is reset */
- if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
- }
- else
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
- }
-
- /* Clear STOPF flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Wait until BUSY flag is reset */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_BUSY, SET, FMPI2C_TIMEOUT_BUSY) != HAL_OK)
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
-
- /* Disable DMA Request */
- hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN;
-
- /* Disable Address Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
-
- hfmpi2c->XferCount = 0;
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Check if Errors has been detected during transfer */
- if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
- {
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
- else
- {
- HAL_FMPI2C_SlaveRxCpltCallback(hfmpi2c);
- }
-}
-
-/**
- * @brief DMA FMPI2C Memory Write process complete callback
- * @param hdma : DMA handle
- * @retval None
- */
-static void FMPI2C_DMAMemTransmitCplt(DMA_HandleTypeDef *hdma)
-{
- uint16_t DevAddress;
- FMPI2C_HandleTypeDef* hfmpi2c = ( FMPI2C_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- /* Check if last DMA request was done with RELOAD */
- /* Set NBYTES to write and reload if size > 255 */
- if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
- {
- /* Wait until TCR flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, FMPI2C_TIMEOUT_TCR) != HAL_OK)
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
-
- /* Disable DMA Request */
- hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN;
-
- /* Check if Errors has been detected during transfer */
- if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
- {
- /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
- /* Wait until STOPF flag is reset */
- if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
- }
- else
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
- }
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Clear Configuration Register 2 */
- __HAL_FMPI2C_RESET_CR2(hfmpi2c);
-
- hfmpi2c->XferCount = 0;
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
- else
- {
- hfmpi2c->pBuffPtr += hfmpi2c->XferSize;
- hfmpi2c->XferCount -= hfmpi2c->XferSize;
- if(hfmpi2c->XferCount > 255)
- {
- hfmpi2c->XferSize = 255;
- }
- else
- {
- hfmpi2c->XferSize = hfmpi2c->XferCount;
- }
-
- DevAddress = (hfmpi2c->Instance->CR2 & FMPI2C_CR2_SADD);
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(hfmpi2c->hdmatx, (uint32_t)hfmpi2c->pBuffPtr, (uint32_t)&hfmpi2c->Instance->TXDR, hfmpi2c->XferSize);
-
- /* Send Slave Address */
- /* Set NBYTES to write and reload if size > 255 */
- if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
- }
-
- /* Wait until TXIS flag is set */
- if(FMPI2C_WaitOnTXISFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_TXIS) != HAL_OK)
- {
- /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
- /* Wait until STOPF flag is reset */
- if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
- }
- else
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
- }
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Clear Configuration Register 2 */
- __HAL_FMPI2C_RESET_CR2(hfmpi2c);
-
- hfmpi2c->XferCount = 0;
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
- else
- {
- /* Enable DMA Request */
- hfmpi2c->Instance->CR1 |= FMPI2C_CR1_TXDMAEN;
- }
- }
- }
- else
- {
- /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
- /* Wait until STOPF flag is reset */
- if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
- }
- else
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
- }
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Clear Configuration Register 2 */
- __HAL_FMPI2C_RESET_CR2(hfmpi2c);
-
- /* Disable DMA Request */
- hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_TXDMAEN;
-
- hfmpi2c->XferCount = 0;
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Check if Errors has been detected during transfer */
- if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
- {
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
- else
- {
- HAL_FMPI2C_MemTxCpltCallback(hfmpi2c);
- }
- }
-}
-
-/**
- * @brief DMA FMPI2C Memory Read process complete callback
- * @param hdma: DMA handle
- * @retval None
- */
-static void FMPI2C_DMAMemReceiveCplt(DMA_HandleTypeDef *hdma)
-{
- FMPI2C_HandleTypeDef* hfmpi2c = ( FMPI2C_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- uint16_t DevAddress;
-
- /* Check if last DMA request was done with RELOAD */
- /* Set NBYTES to write and reload if size > 255 */
- if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
- {
- /* Wait until TCR flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_TCR, RESET, FMPI2C_TIMEOUT_TCR) != HAL_OK)
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
-
- /* Disable DMA Request */
- hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN;
-
- /* Check if Errors has been detected during transfer */
- if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
- {
- /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
- /* Wait until STOPF flag is reset */
- if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
- }
- else
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
- }
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Clear Configuration Register 2 */
- __HAL_FMPI2C_RESET_CR2(hfmpi2c);
-
- hfmpi2c->XferCount = 0;
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
- else
- {
- hfmpi2c->pBuffPtr += hfmpi2c->XferSize;
- hfmpi2c->XferCount -= hfmpi2c->XferSize;
- if(hfmpi2c->XferCount > 255)
- {
- hfmpi2c->XferSize = 255;
- }
- else
- {
- hfmpi2c->XferSize = hfmpi2c->XferCount;
- }
-
- DevAddress = (hfmpi2c->Instance->CR2 & FMPI2C_CR2_SADD);
-
- /* Enable the DMA channel */
- HAL_DMA_Start_IT(hfmpi2c->hdmarx, (uint32_t)&hfmpi2c->Instance->RXDR, (uint32_t)hfmpi2c->pBuffPtr, hfmpi2c->XferSize);
-
- /* Send Slave Address */
- /* Set NBYTES to write and reload if size > 255 */
- if( (hfmpi2c->XferSize == 255) && (hfmpi2c->XferSize < hfmpi2c->XferCount) )
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_RELOAD_MODE, FMPI2C_NO_STARTSTOP);
- }
- else
- {
- FMPI2C_TransferConfig(hfmpi2c,DevAddress,hfmpi2c->XferSize, FMPI2C_AUTOEND_MODE, FMPI2C_NO_STARTSTOP);
- }
-
- /* Wait until RXNE flag is set */
- if(FMPI2C_WaitOnFlagUntilTimeout(hfmpi2c, FMPI2C_FLAG_RXNE, RESET, FMPI2C_TIMEOUT_RXNE) != HAL_OK)
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
-
- /* Check if Errors has been detected during transfer */
- if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
- {
- /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
- /* Wait until STOPF flag is reset */
- if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
- }
- else
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
- }
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Clear Configuration Register 2 */
- __HAL_FMPI2C_RESET_CR2(hfmpi2c);
-
- hfmpi2c->XferCount = 0;
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
- else
- {
- /* Enable DMA Request */
- hfmpi2c->Instance->CR1 |= FMPI2C_CR1_RXDMAEN;
- }
- }
- }
- else
- {
- /* No need to Check TC flag, with AUTOEND mode the stop is automatically generated */
- /* Wait until STOPF flag is reset */
- if(FMPI2C_WaitOnSTOPFlagUntilTimeout(hfmpi2c, FMPI2C_TIMEOUT_STOPF) != HAL_OK)
- {
- if(hfmpi2c->ErrorCode == HAL_FMPI2C_ERROR_AF)
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_AF;
- }
- else
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- }
- }
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Clear Configuration Register 2 */
- __HAL_FMPI2C_RESET_CR2(hfmpi2c);
-
- /* Disable DMA Request */
- hfmpi2c->Instance->CR1 &= ~FMPI2C_CR1_RXDMAEN;
-
- hfmpi2c->XferCount = 0;
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Check if Errors has been detected during transfer */
- if(hfmpi2c->ErrorCode != HAL_FMPI2C_ERROR_NONE)
- {
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
- }
- else
- {
- HAL_FMPI2C_MemRxCpltCallback(hfmpi2c);
- }
- }
-}
-
-/**
- * @brief DMA FMPI2C communication error callback.
- * @param hdma : DMA handle
- * @retval None
- */
-static void FMPI2C_DMAError(DMA_HandleTypeDef *hdma)
-{
- FMPI2C_HandleTypeDef* hfmpi2c = ( FMPI2C_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- /* Disable Acknowledge */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_NACK;
-
- hfmpi2c->XferCount = 0;
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_DMA;
-
- HAL_FMPI2C_ErrorCallback(hfmpi2c);
-}
-
-/**
- * @brief This function handles FMPI2C Communication Timeout.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param Flag: specifies the FMPI2C flag to check.
- * @param Status: The new Flag status (SET or RESET).
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-static HAL_StatusTypeDef FMPI2C_WaitOnFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
-{
- uint32_t tickstart = HAL_GetTick();
-
- /* Wait until flag is set */
- if(Status == RESET)
- {
- while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, Flag) == RESET)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- hfmpi2c->State= HAL_FMPI2C_STATE_READY;
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
- return HAL_TIMEOUT;
- }
- }
- }
- }
- else
- {
- while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, Flag) != RESET)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- hfmpi2c->State= HAL_FMPI2C_STATE_READY;
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
- return HAL_TIMEOUT;
- }
- }
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief This function handles FMPI2C Communication Timeout for specific usage of TXIS flag.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-static HAL_StatusTypeDef FMPI2C_WaitOnTXISFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout)
-{
- uint32_t tickstart = HAL_GetTick();
-
- while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_TXIS) == RESET)
- {
- /* Check if a NACK is detected */
- if(FMPI2C_IsAcknowledgeFailed(hfmpi2c, Timeout) != HAL_OK)
- {
- return HAL_ERROR;
- }
-
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- hfmpi2c->State= HAL_FMPI2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_TIMEOUT;
- }
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief This function handles FMPI2C Communication Timeout for specific usage of STOP flag.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-static HAL_StatusTypeDef FMPI2C_WaitOnSTOPFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout)
-{
- uint32_t tickstart = 0x00;
- tickstart = HAL_GetTick();
-
- while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == RESET)
- {
- /* Check if a NACK is detected */
- if(FMPI2C_IsAcknowledgeFailed(hfmpi2c, Timeout) != HAL_OK)
- {
- return HAL_ERROR;
- }
-
- /* Check for the Timeout */
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- hfmpi2c->State= HAL_FMPI2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_TIMEOUT;
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief This function handles FMPI2C Communication Timeout for specific usage of RXNE flag.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-static HAL_StatusTypeDef FMPI2C_WaitOnRXNEFlagUntilTimeout(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout)
-{
- uint32_t tickstart = 0x00;
- tickstart = HAL_GetTick();
-
- while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_RXNE) == RESET)
- {
- /* Check if a STOPF is detected */
- if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == SET)
- {
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Clear Configuration Register 2 */
- __HAL_FMPI2C_RESET_CR2(hfmpi2c);
-
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_NONE;
- hfmpi2c->State= HAL_FMPI2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_ERROR;
- }
-
- /* Check for the Timeout */
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- hfmpi2c->ErrorCode |= HAL_FMPI2C_ERROR_TIMEOUT;
- hfmpi2c->State= HAL_FMPI2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_TIMEOUT;
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief This function handles Acknowledge failed detection during an FMPI2C Communication.
- * @param hfmpi2c : Pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2C.
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-static HAL_StatusTypeDef FMPI2C_IsAcknowledgeFailed(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t Timeout)
-{
- uint32_t tickstart = 0x00;
- tickstart = HAL_GetTick();
-
- if(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_AF) == SET)
- {
- /* Generate stop if necessary only in case of FMPI2C peripheral in MASTER mode */
- if((hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MEM_BUSY_TX)
- || (hfmpi2c->State == HAL_FMPI2C_STATE_MEM_BUSY_RX))
- {
- /* No need to generate the STOP condition if AUTOEND mode is enabled */
- /* Generate the STOP condition only in case of SOFTEND mode is enabled */
- if((hfmpi2c->Instance->CR2 & FMPI2C_AUTOEND_MODE) != FMPI2C_AUTOEND_MODE)
- {
- /* Generate Stop */
- hfmpi2c->Instance->CR2 |= FMPI2C_CR2_STOP;
- }
- }
-
- /* Wait until STOP Flag is reset */
- /* AutoEnd should be initiate after AF */
- while(__HAL_FMPI2C_GET_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF) == RESET)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- hfmpi2c->State= HAL_FMPI2C_STATE_READY;
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Clear NACKF Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_AF);
-
- /* Clear STOP Flag */
- __HAL_FMPI2C_CLEAR_FLAG(hfmpi2c, FMPI2C_FLAG_STOPF);
-
- /* Clear Configuration Register 2 */
- __HAL_FMPI2C_RESET_CR2(hfmpi2c);
-
- hfmpi2c->ErrorCode = HAL_FMPI2C_ERROR_AF;
- hfmpi2c->State= HAL_FMPI2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_ERROR;
- }
- return HAL_OK;
-}
-
-/**
- * @brief Handles FMPI2Cx communication when starting transfer or during transfer (TC or TCR flag are set).
- * @param hfmpi2c: FMPI2C handle.
- * @param DevAddress: specifies the slave address to be programmed.
- * @param Size: specifies the number of bytes to be programmed.
- * This parameter must be a value between 0 and 255.
- * @param Mode: new state of the FMPI2C START condition generation.
- * This parameter can be one of the following values:
- * @arg FMPI2C_RELOAD_MODE: Enable Reload mode .
- * @arg FMPI2C_AUTOEND_MODE: Enable Automatic end mode.
- * @arg FMPI2C_SOFTEND_MODE: Enable Software end mode.
- * @param Request: new state of the FMPI2C START condition generation.
- * This parameter can be one of the following values:
- * @arg FMPI2C_NO_STARTSTOP: Don't Generate stop and start condition.
- * @arg FMPI2C_GENERATE_STOP: Generate stop condition (Size should be set to 0).
- * @arg FMPI2C_GENERATE_START_READ: Generate Restart for read request.
- * @arg FMPI2C_GENERATE_START_WRITE: Generate Restart for write request.
- * @retval None
- */
-static void FMPI2C_TransferConfig(FMPI2C_HandleTypeDef *hfmpi2c, uint16_t DevAddress, uint8_t Size, uint32_t Mode, uint32_t Request)
-{
- uint32_t tmpreg = 0;
-
- /* Check the parameters */
- assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
- assert_param(IS_TRANSFER_MODE(Mode));
- assert_param(IS_TRANSFER_REQUEST(Request));
-
- /* Get the CR2 register value */
- tmpreg = hfmpi2c->Instance->CR2;
-
- /* clear tmpreg specific bits */
- tmpreg &= (uint32_t)~((uint32_t)(FMPI2C_CR2_SADD | FMPI2C_CR2_NBYTES | FMPI2C_CR2_RELOAD | FMPI2C_CR2_AUTOEND | FMPI2C_CR2_RD_WRN | FMPI2C_CR2_START | FMPI2C_CR2_STOP));
-
- /* update tmpreg */
- tmpreg |= (uint32_t)(((uint32_t)DevAddress & FMPI2C_CR2_SADD) | (((uint32_t)Size << 16 ) & FMPI2C_CR2_NBYTES) | \
- (uint32_t)Mode | (uint32_t)Request);
-
- /* update CR2 register */
- hfmpi2c->Instance->CR2 = tmpreg;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-#endif /* STM32F446xx */
-#endif /* HAL_FMPI2C_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c_ex.c
deleted file mode 100644
index 705b115..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_fmpi2c_ex.c
+++ /dev/null
@@ -1,326 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_fmpi2c_ex.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief Extended FMPI2C HAL module driver.
- *
- * This file provides firmware functions to manage the following
- * functionalities of the Inter Integrated Circuit (FMPI2C) peripheral:
- * + Extended Control methods
- *
- @verbatim
- ==============================================================================
- ##### FMPI2C peripheral extended features #####
- ==============================================================================
-
- [..] Comparing to other previous devices, the FMPI2C interface for STM32L4XX
- devices contains the following additional features
-
- (+) Possibility to disable or enable Analog Noise Filter
- (+) Use of a configured Digital Noise Filter
- (+) Disable or enable wakeup from Stop mode
-
- ##### How to use this driver #####
- ==============================================================================
- [..] This driver provides functions to configure Noise Filter
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup FMPI2CEx FMPI2CEx
- * @brief FMPI2C HAL module driver
- * @{
- */
-
-#ifdef HAL_FMPI2C_MODULE_ENABLED
-
-#if defined(STM32F446xx)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-
-/** @defgroup FMPI2CEx_Exported_Functions FMPI2C Extended Exported Functions
- * @{
- */
-
-
-/** @defgroup FMPI2CEx_Exported_Functions_Group1 Peripheral Control methods
- * @brief management functions
- *
-@verbatim
- ===============================================================================
- ##### Extension features functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Configure Noise Filters
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Configures FMPI2C Analog noise filter.
- * @param hfmpi2c : pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2Cx peripheral.
- * @param AnalogFilter : new state of the Analog filter.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2CEx_AnalogFilter_Config(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t AnalogFilter)
-{
- /* Check the parameters */
- assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
- assert_param(IS_FMPI2C_ANALOG_FILTER(AnalogFilter));
-
- if((hfmpi2c->State == HAL_FMPI2C_STATE_BUSY) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_RX)
- || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_RX))
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
-
- /* Disable the selected FMPI2C peripheral */
- __HAL_FMPI2C_DISABLE(hfmpi2c);
-
- /* Reset FMPI2Cx ANOFF bit */
- hfmpi2c->Instance->CR1 &= ~(FMPI2C_CR1_ANFOFF);
-
- /* Set analog filter bit*/
- hfmpi2c->Instance->CR1 |= AnalogFilter;
-
- __HAL_FMPI2C_ENABLE(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
-}
-
-/**
- * @brief Configures FMPI2C Digital noise filter.
- * @param hfmpi2c : pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2Cx peripheral.
- * @param DigitalFilter : Coefficient of digital noise filter between 0x00 and 0x0F.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2CEx_DigitalFilter_Config(FMPI2C_HandleTypeDef *hfmpi2c, uint32_t DigitalFilter)
-{
- uint32_t tmpreg = 0;
-
- /* Check the parameters */
- assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
- assert_param(IS_FMPI2C_DIGITAL_FILTER(DigitalFilter));
-
- if((hfmpi2c->State == HAL_FMPI2C_STATE_BUSY) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_RX)
- || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_RX))
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
-
- /* Disable the selected FMPI2C peripheral */
- __HAL_FMPI2C_DISABLE(hfmpi2c);
-
- /* Get the old register value */
- tmpreg = hfmpi2c->Instance->CR1;
-
- /* Reset FMPI2Cx DNF bits [11:8] */
- tmpreg &= ~(FMPI2C_CR1_DFN);
-
- /* Set FMPI2Cx DNF coefficient */
- tmpreg |= DigitalFilter << 8;
-
- /* Store the new register value */
- hfmpi2c->Instance->CR1 = tmpreg;
-
- __HAL_FMPI2C_ENABLE(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
-}
-
-/**
- * @brief Enables FMPI2C wakeup from stop mode.
- * @param hfmpi2c : pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2Cx peripheral.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2CEx_EnableWakeUp (FMPI2C_HandleTypeDef *hfmpi2c)
-{
- /* Check the parameters */
- assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
-
- if((hfmpi2c->State == HAL_FMPI2C_STATE_BUSY) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_RX)
- || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_RX))
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
-
- /* Disable the selected FMPI2C peripheral */
- __HAL_FMPI2C_DISABLE(hfmpi2c);
-
- /* Enable wakeup from stop mode */
- hfmpi2c->Instance->CR1 |= FMPI2C_CR1_WUPEN;
-
- __HAL_FMPI2C_ENABLE(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
-}
-
-
-/**
- * @brief Disables FMPI2C wakeup from stop mode.
- * @param hfmpi2c : pointer to a FMPI2C_HandleTypeDef structure that contains
- * the configuration information for the specified FMPI2Cx peripheral.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_FMPI2CEx_DisableWakeUp (FMPI2C_HandleTypeDef *hfmpi2c)
-{
- /* Check the parameters */
- assert_param(IS_FMPI2C_ALL_INSTANCE(hfmpi2c->Instance));
-
- if((hfmpi2c->State == HAL_FMPI2C_STATE_BUSY) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_MASTER_BUSY_RX)
- || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_TX) || (hfmpi2c->State == HAL_FMPI2C_STATE_SLAVE_BUSY_RX))
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_BUSY;
-
- /* Disable the selected FMPI2C peripheral */
- __HAL_FMPI2C_DISABLE(hfmpi2c);
-
- /* Enable wakeup from stop mode */
- hfmpi2c->Instance->CR1 &= ~(FMPI2C_CR1_WUPEN);
-
- __HAL_FMPI2C_ENABLE(hfmpi2c);
-
- hfmpi2c->State = HAL_FMPI2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hfmpi2c);
-
- return HAL_OK;
-}
-
-/**
- * @brief Enable the FMPI2C1 fast mode plus driving capability.
- * @param ConfigFastModePlus: selects the pin.
- * This parameter can be one of the @ref FMPI2CEx_FastModePlus values
- * @retval None
- */
-void HAL_FMPI2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus)
-{
- /* Check the parameter */
- assert_param(IS_FMPI2C_FASTMODEPLUS(ConfigFastModePlus));
-
- /* Enable SYSCFG clock */
- __HAL_RCC_SYSCFG_CLK_ENABLE();
-
- /* Enable fast mode plus driving capability for selected pin */
- SET_BIT(SYSCFG->CFGR, (uint32_t)ConfigFastModePlus);
-}
-
-/**
- * @brief Disable the FMPI2C1 fast mode plus driving capability.
- * @param ConfigFastModePlus: selects the pin.
- * This parameter can be one of the @ref FMPI2CEx_FastModePlus values
- * @retval None
- */
-void HAL_FMPI2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus)
-{
- /* Check the parameter */
- assert_param(IS_FMPI2C_FASTMODEPLUS(ConfigFastModePlus));
-
- /* Enable SYSCFG clock */
- __HAL_RCC_SYSCFG_CLK_ENABLE();
-
- /* Disable fast mode plus driving capability for selected pin */
- CLEAR_BIT(SYSCFG->CFGR, (uint32_t)ConfigFastModePlus);
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-#endif /* STM32F446xx */
-#endif /* HAL_FMPI2C_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c
deleted file mode 100644
index d7d6899..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c
+++ /dev/null
@@ -1,545 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_gpio.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief GPIO HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the General Purpose Input/Output (GPIO) peripheral:
- * + Initialization and de-initialization functions
- * + IO operation functions
- *
- @verbatim
- ==============================================================================
- ##### GPIO Peripheral features #####
- ==============================================================================
- [..]
- Subject to the specific hardware characteristics of each I/O port listed in the datasheet, each
- port bit of the General Purpose IO (GPIO) Ports, can be individually configured by software
- in several modes:
- (+) Input mode
- (+) Analog mode
- (+) Output mode
- (+) Alternate function mode
- (+) External interrupt/event lines
-
- [..]
- During and just after reset, the alternate functions and external interrupt
- lines are not active and the I/O ports are configured in input floating mode.
-
- [..]
- All GPIO pins have weak internal pull-up and pull-down resistors, which can be
- activated or not.
-
- [..]
- In Output or Alternate mode, each IO can be configured on open-drain or push-pull
- type and the IO speed can be selected depending on the VDD value.
-
- [..]
- All ports have external interrupt/event capability. To use external interrupt
- lines, the port must be configured in input mode. All available GPIO pins are
- connected to the 16 external interrupt/event lines from EXTI0 to EXTI15.
-
- [..]
- The external interrupt/event controller consists of up to 23 edge detectors
- (16 lines are connected to GPIO) for generating event/interrupt requests (each
- input line can be independently configured to select the type (interrupt or event)
- and the corresponding trigger event (rising or falling or both). Each line can
- also be masked independently.
-
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (#) Enable the GPIO AHB clock using the following function: __HAL_RCC_GPIOx_CLK_ENABLE().
-
- (#) Configure the GPIO pin(s) using HAL_GPIO_Init().
- (++) Configure the IO mode using "Mode" member from GPIO_InitTypeDef structure
- (++) Activate Pull-up, Pull-down resistor using "Pull" member from GPIO_InitTypeDef
- structure.
- (++) In case of Output or alternate function mode selection: the speed is
- configured through "Speed" member from GPIO_InitTypeDef structure.
- (++) In alternate mode is selection, the alternate function connected to the IO
- is configured through "Alternate" member from GPIO_InitTypeDef structure.
- (++) Analog mode is required when a pin is to be used as ADC channel
- or DAC output.
- (++) In case of external interrupt/event selection the "Mode" member from
- GPIO_InitTypeDef structure select the type (interrupt or event) and
- the corresponding trigger event (rising or falling or both).
-
- (#) In case of external interrupt/event mode selection, configure NVIC IRQ priority
- mapped to the EXTI line using HAL_NVIC_SetPriority() and enable it using
- HAL_NVIC_EnableIRQ().
-
- (#) To get the level of a pin configured in input mode use HAL_GPIO_ReadPin().
-
- (#) To set/reset the level of a pin configured in output mode use
- HAL_GPIO_WritePin()/HAL_GPIO_TogglePin().
-
- (#) To lock pin configuration until next reset use HAL_GPIO_LockPin().
-
-
- (#) During and just after reset, the alternate functions are not
- active and the GPIO pins are configured in input floating mode (except JTAG
- pins).
-
- (#) The LSE oscillator pins OSC32_IN and OSC32_OUT can be used as general purpose
- (PC14 and PC15, respectively) when the LSE oscillator is off. The LSE has
- priority over the GPIO function.
-
- (#) The HSE oscillator pins OSC_IN/OSC_OUT can be used as
- general purpose PH0 and PH1, respectively, when the HSE oscillator is off.
- The HSE has priority over the GPIO function.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup GPIO GPIO
- * @brief GPIO HAL module driver
- * @{
- */
-
-#ifdef HAL_GPIO_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @addtogroup GPIO_Private_Constants GPIO Private Constants
- * @{
- */
-#define GPIO_MODE ((uint32_t)0x00000003)
-#define EXTI_MODE ((uint32_t)0x10000000)
-#define GPIO_MODE_IT ((uint32_t)0x00010000)
-#define GPIO_MODE_EVT ((uint32_t)0x00020000)
-#define RISING_EDGE ((uint32_t)0x00100000)
-#define FALLING_EDGE ((uint32_t)0x00200000)
-#define GPIO_OUTPUT_TYPE ((uint32_t)0x00000010)
-
-#define GPIO_NUMBER ((uint32_t)16)
-/**
- * @}
- */
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup GPIO_Exported_Functions GPIO Exported Functions
- * @{
- */
-
-/** @defgroup GPIO_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..]
- This section provides functions allowing to initialize and de-initialize the GPIOs
- to be ready for use.
-
-@endverbatim
- * @{
- */
-
-
-/**
- * @brief Initializes the GPIOx peripheral according to the specified parameters in the GPIO_Init.
- * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
- * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
- * @param GPIO_Init: pointer to a GPIO_InitTypeDef structure that contains
- * the configuration information for the specified GPIO peripheral.
- * @retval None
- */
-void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init)
-{
- uint32_t position;
- uint32_t ioposition = 0x00;
- uint32_t iocurrent = 0x00;
- uint32_t temp = 0x00;
-
- /* Check the parameters */
- assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
- assert_param(IS_GPIO_PIN(GPIO_Init->Pin));
- assert_param(IS_GPIO_MODE(GPIO_Init->Mode));
- assert_param(IS_GPIO_PULL(GPIO_Init->Pull));
-
- /* Configure the port pins */
- for(position = 0; position < GPIO_NUMBER; position++)
- {
- /* Get the IO position */
- ioposition = ((uint32_t)0x01) << position;
- /* Get the current IO position */
- iocurrent = (uint32_t)(GPIO_Init->Pin) & ioposition;
-
- if(iocurrent == ioposition)
- {
- /*--------------------- GPIO Mode Configuration ------------------------*/
- /* In case of Alternate function mode selection */
- if((GPIO_Init->Mode == GPIO_MODE_AF_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
- {
- /* Check the Alternate function parameter */
- assert_param(IS_GPIO_AF(GPIO_Init->Alternate));
- /* Configure Alternate function mapped with the current IO */
- temp = GPIOx->AFR[position >> 3];
- temp &= ~((uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ;
- temp |= ((uint32_t)(GPIO_Init->Alternate) << (((uint32_t)position & (uint32_t)0x07) * 4));
- GPIOx->AFR[position >> 3] = temp;
- }
-
- /* Configure IO Direction mode (Input, Output, Alternate or Analog) */
- temp = GPIOx->MODER;
- temp &= ~(GPIO_MODER_MODER0 << (position * 2));
- temp |= ((GPIO_Init->Mode & GPIO_MODE) << (position * 2));
- GPIOx->MODER = temp;
-
- /* In case of Output or Alternate function mode selection */
- if((GPIO_Init->Mode == GPIO_MODE_OUTPUT_PP) || (GPIO_Init->Mode == GPIO_MODE_AF_PP) ||
- (GPIO_Init->Mode == GPIO_MODE_OUTPUT_OD) || (GPIO_Init->Mode == GPIO_MODE_AF_OD))
- {
- /* Check the Speed parameter */
- assert_param(IS_GPIO_SPEED(GPIO_Init->Speed));
- /* Configure the IO Speed */
- temp = GPIOx->OSPEEDR;
- temp &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2));
- temp |= (GPIO_Init->Speed << (position * 2));
- GPIOx->OSPEEDR = temp;
-
- /* Configure the IO Output Type */
- temp = GPIOx->OTYPER;
- temp &= ~(GPIO_OTYPER_OT_0 << position) ;
- temp |= (((GPIO_Init->Mode & GPIO_OUTPUT_TYPE) >> 4) << position);
- GPIOx->OTYPER = temp;
- }
-
- /* Activate the Pull-up or Pull down resistor for the current IO */
- temp = GPIOx->PUPDR;
- temp &= ~(GPIO_PUPDR_PUPDR0 << (position * 2));
- temp |= ((GPIO_Init->Pull) << (position * 2));
- GPIOx->PUPDR = temp;
-
- /*--------------------- EXTI Mode Configuration ------------------------*/
- /* Configure the External Interrupt or event for the current IO */
- if((GPIO_Init->Mode & EXTI_MODE) == EXTI_MODE)
- {
- /* Enable SYSCFG Clock */
- __HAL_RCC_SYSCFG_CLK_ENABLE();
-
- temp = SYSCFG->EXTICR[position >> 2];
- temp &= ~(((uint32_t)0x0F) << (4 * (position & 0x03)));
- temp |= ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4 * (position & 0x03)));
- SYSCFG->EXTICR[position >> 2] = temp;
-
- /* Clear EXTI line configuration */
- temp = EXTI->IMR;
- temp &= ~((uint32_t)iocurrent);
- if((GPIO_Init->Mode & GPIO_MODE_IT) == GPIO_MODE_IT)
- {
- temp |= iocurrent;
- }
- EXTI->IMR = temp;
-
- temp = EXTI->EMR;
- temp &= ~((uint32_t)iocurrent);
- if((GPIO_Init->Mode & GPIO_MODE_EVT) == GPIO_MODE_EVT)
- {
- temp |= iocurrent;
- }
- EXTI->EMR = temp;
-
- /* Clear Rising Falling edge configuration */
- temp = EXTI->RTSR;
- temp &= ~((uint32_t)iocurrent);
- if((GPIO_Init->Mode & RISING_EDGE) == RISING_EDGE)
- {
- temp |= iocurrent;
- }
- EXTI->RTSR = temp;
-
- temp = EXTI->FTSR;
- temp &= ~((uint32_t)iocurrent);
- if((GPIO_Init->Mode & FALLING_EDGE) == FALLING_EDGE)
- {
- temp |= iocurrent;
- }
- EXTI->FTSR = temp;
- }
- }
- }
-}
-
-/**
- * @brief De-initializes the GPIOx peripheral registers to their default reset values.
- * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
- * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
- * @param GPIO_Pin: specifies the port bit to be written.
- * This parameter can be one of GPIO_PIN_x where x can be (0..15).
- * @retval None
- */
-void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin)
-{
- uint32_t position;
- uint32_t ioposition = 0x00;
- uint32_t iocurrent = 0x00;
- uint32_t tmp = 0x00;
-
- /* Check the parameters */
- assert_param(IS_GPIO_ALL_INSTANCE(GPIOx));
-
- /* Configure the port pins */
- for(position = 0; position < GPIO_NUMBER; position++)
- {
- /* Get the IO position */
- ioposition = ((uint32_t)0x01) << position;
- /* Get the current IO position */
- iocurrent = (GPIO_Pin) & ioposition;
-
- if(iocurrent == ioposition)
- {
- /*------------------------- GPIO Mode Configuration --------------------*/
- /* Configure IO Direction in Input Floating Mode */
- GPIOx->MODER &= ~(GPIO_MODER_MODER0 << (position * 2));
-
- /* Configure the default Alternate Function in current IO */
- GPIOx->AFR[position >> 3] &= ~((uint32_t)0xF << ((uint32_t)(position & (uint32_t)0x07) * 4)) ;
-
- /* Configure the default value for IO Speed */
- GPIOx->OSPEEDR &= ~(GPIO_OSPEEDER_OSPEEDR0 << (position * 2));
-
- /* Configure the default value IO Output Type */
- GPIOx->OTYPER &= ~(GPIO_OTYPER_OT_0 << position) ;
-
- /* Deactivate the Pull-up and Pull-down resistor for the current IO */
- GPIOx->PUPDR &= ~(GPIO_PUPDR_PUPDR0 << (position * 2));
-
- /*------------------------- EXTI Mode Configuration --------------------*/
- tmp = SYSCFG->EXTICR[position >> 2];
- tmp &= (((uint32_t)0x0F) << (4 * (position & 0x03)));
- if(tmp == ((uint32_t)(GPIO_GET_INDEX(GPIOx)) << (4 * (position & 0x03))))
- {
- /* Configure the External Interrupt or event for the current IO */
- tmp = ((uint32_t)0x0F) << (4 * (position & 0x03));
- SYSCFG->EXTICR[position >> 2] &= ~tmp;
-
- /* Clear EXTI line configuration */
- EXTI->IMR &= ~((uint32_t)iocurrent);
- EXTI->EMR &= ~((uint32_t)iocurrent);
-
- /* Clear Rising Falling edge configuration */
- EXTI->RTSR &= ~((uint32_t)iocurrent);
- EXTI->FTSR &= ~((uint32_t)iocurrent);
- }
- }
- }
-}
-
-/**
- * @}
- */
-
-/** @defgroup GPIO_Exported_Functions_Group2 IO operation functions
- * @brief GPIO Read and Write
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Reads the specified input port pin.
- * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
- * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
- * @param GPIO_Pin: specifies the port bit to read.
- * This parameter can be GPIO_PIN_x where x can be (0..15).
- * @retval The input port pin value.
- */
-GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
-{
- GPIO_PinState bitstatus;
-
- /* Check the parameters */
- assert_param(IS_GPIO_PIN(GPIO_Pin));
-
- if((GPIOx->IDR & GPIO_Pin) != (uint32_t)GPIO_PIN_RESET)
- {
- bitstatus = GPIO_PIN_SET;
- }
- else
- {
- bitstatus = GPIO_PIN_RESET;
- }
- return bitstatus;
-}
-
-/**
- * @brief Sets or clears the selected data port bit.
- *
- * @note This function uses GPIOx_BSRR register to allow atomic read/modify
- * accesses. In this way, there is no risk of an IRQ occurring between
- * the read and the modify access.
- *
- * @param GPIOx: where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
- * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
- * @param GPIO_Pin: specifies the port bit to be written.
- * This parameter can be one of GPIO_PIN_x where x can be (0..15).
- * @param PinState: specifies the value to be written to the selected bit.
- * This parameter can be one of the GPIO_PinState enum values:
- * @arg GPIO_PIN_RESET: to clear the port pin
- * @arg GPIO_PIN_SET: to set the port pin
- * @retval None
- */
-void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState)
-{
- /* Check the parameters */
- assert_param(IS_GPIO_PIN(GPIO_Pin));
- assert_param(IS_GPIO_PIN_ACTION(PinState));
-
- if(PinState != GPIO_PIN_RESET)
- {
- GPIOx->BSRR = GPIO_Pin;
- }
- else
- {
- GPIOx->BSRR = (uint32_t)GPIO_Pin << 16;
- }
-}
-
-/**
- * @brief Toggles the specified GPIO pins.
- * @param GPIOx: Where x can be (A..K) to select the GPIO peripheral for STM32F429X device or
- * x can be (A..I) to select the GPIO peripheral for STM32F40XX and STM32F427X devices.
- * @param GPIO_Pin: Specifies the pins to be toggled.
- * @retval None
- */
-void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
-{
- /* Check the parameters */
- assert_param(IS_GPIO_PIN(GPIO_Pin));
-
- GPIOx->ODR ^= GPIO_Pin;
-}
-
-/**
- * @brief Locks GPIO Pins configuration registers.
- * @note The locked registers are GPIOx_MODER, GPIOx_OTYPER, GPIOx_OSPEEDR,
- * GPIOx_PUPDR, GPIOx_AFRL and GPIOx_AFRH.
- * @note The configuration of the locked GPIO pins can no longer be modified
- * until the next reset.
- * @param GPIOx: where x can be (A..F) to select the GPIO peripheral for STM32F4 family
- * @param GPIO_Pin: specifies the port bit to be locked.
- * This parameter can be any combination of GPIO_PIN_x where x can be (0..15).
- * @retval None
- */
-HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin)
-{
- __IO uint32_t tmp = GPIO_LCKR_LCKK;
-
- /* Check the parameters */
- assert_param(IS_GPIO_PIN(GPIO_Pin));
-
- /* Apply lock key write sequence */
- tmp |= GPIO_Pin;
- /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
- GPIOx->LCKR = tmp;
- /* Reset LCKx bit(s): LCKK='0' + LCK[15-0] */
- GPIOx->LCKR = GPIO_Pin;
- /* Set LCKx bit(s): LCKK='1' + LCK[15-0] */
- GPIOx->LCKR = tmp;
- /* Read LCKK bit*/
- tmp = GPIOx->LCKR;
-
- if((GPIOx->LCKR & GPIO_LCKR_LCKK) != RESET)
- {
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief This function handles EXTI interrupt request.
- * @param GPIO_Pin: Specifies the pins connected EXTI line
- * @retval None
- */
-void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin)
-{
- /* EXTI line interrupt detected */
- if(__HAL_GPIO_EXTI_GET_IT(GPIO_Pin) != RESET)
- {
- __HAL_GPIO_EXTI_CLEAR_IT(GPIO_Pin);
- HAL_GPIO_EXTI_Callback(GPIO_Pin);
- }
-}
-
-/**
- * @brief EXTI line detection callbacks.
- * @param GPIO_Pin: Specifies the pins connected EXTI line
- * @retval None
- */
-__weak void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_GPIO_EXTI_Callback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-
-#endif /* HAL_GPIO_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash.c
deleted file mode 100644
index fa1ca7b..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash.c
+++ /dev/null
@@ -1,1862 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_hash.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief HASH HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the HASH peripheral:
- * + Initialization and de-initialization functions
- * + HASH/HMAC Processing functions by algorithm using polling mode
- * + HASH/HMAC functions by algorithm using interrupt mode
- * + HASH/HMAC functions by algorithm using DMA mode
- * + Peripheral State functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- The HASH HAL driver can be used as follows:
- (#)Initialize the HASH low level resources by implementing the HAL_HASH_MspInit():
- (##) Enable the HASH interface clock using __HAL_RCC_HASH_CLK_ENABLE()
- (##) In case of using processing APIs based on interrupts (e.g. HAL_HMAC_SHA1_Start_IT())
- (+++) Configure the HASH interrupt priority using HAL_NVIC_SetPriority()
- (+++) Enable the HASH IRQ handler using HAL_NVIC_EnableIRQ()
- (+++) In HASH IRQ handler, call HAL_HASH_IRQHandler()
- (##) In case of using DMA to control data transfer (e.g. HAL_HMAC_SHA1_Start_DMA())
- (+++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
- (+++) Configure and enable one DMA stream one for managing data transfer from
- memory to peripheral (input stream). Managing data transfer from
- peripheral to memory can be performed only using CPU
- (+++) Associate the initialized DMA handle to the HASH DMA handle
- using __HAL_LINKDMA()
- (+++) Configure the priority and enable the NVIC for the transfer complete
- interrupt on the DMA Stream using HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ()
- (#)Initialize the HASH HAL using HAL_HASH_Init(). This function configures mainly:
- (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit.
- (##) For HMAC, the encryption key.
- (##) For HMAC, the key size used for encryption.
- (#)Three processing functions are available:
- (##) Polling mode: processing APIs are blocking functions
- i.e. they process the data and wait till the digest computation is finished
- e.g. HAL_HASH_SHA1_Start()
- (##) Interrupt mode: encryption and decryption APIs are not blocking functions
- i.e. they process the data under interrupt
- e.g. HAL_HASH_SHA1_Start_IT()
- (##) DMA mode: processing APIs are not blocking functions and the CPU is
- not used for data transfer i.e. the data transfer is ensured by DMA
- e.g. HAL_HASH_SHA1_Start_DMA()
- (#)When the processing function is called at first time after HAL_HASH_Init()
- the HASH peripheral is initialized and processes the buffer in input.
- After that, the digest computation is started.
- When processing multi-buffer use the accumulate function to write the
- data in the peripheral without starting the digest computation. In last
- buffer use the start function to input the last buffer ans start the digest
- computation.
- (##) e.g. HAL_HASH_SHA1_Accumulate() : write 1st data buffer in the peripheral without starting the digest computation
- (##) write (n-1)th data buffer in the peripheral without starting the digest computation
- (##) HAL_HASH_SHA1_Start() : write (n)th data buffer in the peripheral and start the digest computation
- (#)In HMAC mode, there is no Accumulate API. Only Start API is available.
- (#)In case of using DMA, call the DMA start processing e.g. HAL_HASH_SHA1_Start_DMA().
- After that, call the finish function in order to get the digest value
- e.g. HAL_HASH_SHA1_Finish()
- (#)Call HAL_HASH_DeInit() to deinitialize the HASH peripheral.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup HASH HASH
- * @brief HASH HAL module driver.
- * @{
- */
-
-#ifdef HAL_HASH_MODULE_ENABLED
-
-#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @defgroup HASH_Private_Functions HASH Private Functions
- * @{
- */
-static void HASH_DMAXferCplt(DMA_HandleTypeDef *hdma);
-static void HASH_DMAError(DMA_HandleTypeDef *hdma);
-static void HASH_GetDigest(uint8_t *pMsgDigest, uint8_t Size);
-static void HASH_WriteData(uint8_t *pInBuffer, uint32_t Size);
-/**
- * @}
- */
-
-/* Private functions ---------------------------------------------------------*/
-/** @addtogroup HASH_Private_Functions
- * @{
- */
-
-/**
- * @brief DMA HASH Input Data complete callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void HASH_DMAXferCplt(DMA_HandleTypeDef *hdma)
-{
- HASH_HandleTypeDef* hhash = ( HASH_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- uint32_t inputaddr = 0;
- uint32_t buffersize = 0;
-
- if((HASH->CR & HASH_CR_MODE) != HASH_CR_MODE)
- {
- /* Disable the DMA transfer */
- HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
-
- /* Change HASH peripheral state */
- hhash->State = HAL_HASH_STATE_READY;
-
- /* Call Input data transfer complete callback */
- HAL_HASH_InCpltCallback(hhash);
- }
- else
- {
- /* Increment Interrupt counter */
- hhash->HashInCount++;
- /* Disable the DMA transfer before starting the next transfer */
- HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
-
- if(hhash->HashInCount <= 2)
- {
- /* In case HashInCount = 1, set the DMA to transfer data to HASH DIN register */
- if(hhash->HashInCount == 1)
- {
- inputaddr = (uint32_t)hhash->pHashInBuffPtr;
- buffersize = hhash->HashBuffSize;
- }
- /* In case HashInCount = 2, set the DMA to transfer key to HASH DIN register */
- else if(hhash->HashInCount == 2)
- {
- inputaddr = (uint32_t)hhash->Init.pKey;
- buffersize = hhash->Init.KeySize;
- }
- /* Configure the number of valid bits in last word of the message */
- MODIFY_REG(HASH->STR, HASH_STR_NBLW, 8 * (buffersize % 4));
-
- /* Set the HASH DMA transfer complete */
- hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
-
- /* Enable the DMA In DMA Stream */
- HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (buffersize%4 ? (buffersize+3)/4:buffersize/4));
-
- /* Enable DMA requests */
- HASH->CR |= (HASH_CR_DMAE);
- }
- else
- {
- /* Disable the DMA transfer */
- HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
-
- /* Reset the InCount */
- hhash->HashInCount = 0;
-
- /* Change HASH peripheral state */
- hhash->State = HAL_HASH_STATE_READY;
-
- /* Call Input data transfer complete callback */
- HAL_HASH_InCpltCallback(hhash);
- }
- }
-}
-
-/**
- * @brief DMA HASH communication error callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void HASH_DMAError(DMA_HandleTypeDef *hdma)
-{
- HASH_HandleTypeDef* hhash = ( HASH_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- hhash->State= HAL_HASH_STATE_READY;
- HAL_HASH_ErrorCallback(hhash);
-}
-
-/**
- * @brief Writes the input buffer in data register.
- * @param pInBuffer: Pointer to input buffer
- * @param Size: The size of input buffer
- * @retval None
- */
-static void HASH_WriteData(uint8_t *pInBuffer, uint32_t Size)
-{
- uint32_t buffercounter;
- uint32_t inputaddr = (uint32_t) pInBuffer;
-
- for(buffercounter = 0; buffercounter < Size; buffercounter+=4)
- {
- HASH->DIN = *(uint32_t*)inputaddr;
- inputaddr+=4;
- }
-}
-
-/**
- * @brief Provides the message digest result.
- * @param pMsgDigest: Pointer to the message digest
- * @param Size: The size of the message digest in bytes
- * @retval None
- */
-static void HASH_GetDigest(uint8_t *pMsgDigest, uint8_t Size)
-{
- uint32_t msgdigest = (uint32_t)pMsgDigest;
-
- switch(Size)
- {
- case 16:
- /* Read the message digest */
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
- break;
- case 20:
- /* Read the message digest */
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[4]);
- break;
- case 28:
- /* Read the message digest */
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[4]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[5]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[6]);
- break;
- case 32:
- /* Read the message digest */
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[4]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[5]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[6]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[7]);
- break;
- default:
- break;
- }
-}
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup HASH_Exported_Functions
- * @{
- */
-
-
-/** @addtogroup HASH_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions.
- *
-@verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Initialize the HASH according to the specified parameters
- in the HASH_InitTypeDef and creates the associated handle.
- (+) DeInitialize the HASH peripheral.
- (+) Initialize the HASH MSP.
- (+) DeInitialize HASH MSP.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the HASH according to the specified parameters in the
- HASH_HandleTypeDef and creates the associated handle.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASH_Init(HASH_HandleTypeDef *hhash)
-{
- /* Check the hash handle allocation */
- if(hhash == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_HASH_DATATYPE(hhash->Init.DataType));
-
- if(hhash->State == HAL_HASH_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hhash->Lock = HAL_UNLOCKED;
- /* Init the low level hardware */
- HAL_HASH_MspInit(hhash);
- }
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Reset HashInCount, HashBuffSize and HashITCounter */
- hhash->HashInCount = 0;
- hhash->HashBuffSize = 0;
- hhash->HashITCounter = 0;
-
- /* Set the data type */
- HASH->CR |= (uint32_t) (hhash->Init.DataType);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_READY;
-
- /* Set the default HASH phase */
- hhash->Phase = HAL_HASH_PHASE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the HASH peripheral.
- * @note This API must be called before starting a new processing.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASH_DeInit(HASH_HandleTypeDef *hhash)
-{
- /* Check the HASH handle allocation */
- if(hhash == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Set the default HASH phase */
- hhash->Phase = HAL_HASH_PHASE_READY;
-
- /* Reset HashInCount, HashBuffSize and HashITCounter */
- hhash->HashInCount = 0;
- hhash->HashBuffSize = 0;
- hhash->HashITCounter = 0;
-
- /* DeInit the low level hardware */
- HAL_HASH_MspDeInit(hhash);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the HASH MSP.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @retval None
- */
-__weak void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_HASH_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes HASH MSP.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @retval None
- */
-__weak void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_HASH_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @brief Input data transfer complete callback.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @retval None
- */
- __weak void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_HASH_InCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Data transfer Error callback.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @retval None
- */
- __weak void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_HASH_ErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Digest computation complete callback. It is used only with interrupt.
- * @note This callback is not relevant with DMA.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @retval None
- */
- __weak void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_HASH_DgstCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup HASH_Exported_Functions_Group2 HASH processing functions using polling mode
- * @brief processing functions using polling mode
- *
-@verbatim
- ===============================================================================
- ##### HASH processing using polling mode functions#####
- ===============================================================================
- [..] This section provides functions allowing to calculate in polling mode
- the hash value using one of the following algorithms:
- (+) MD5
- (+) SHA1
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the HASH peripheral in MD5 mode then processes pInBuffer.
- The digest is available in pOutBuffer.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is multiple of 64 bytes, appending the input buffer is possible.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware
- * and appending the input buffer is no more possible.
- * @param pOutBuffer: Pointer to the computed digest. Its size must be 16 bytes.
- * @param Timeout: Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASH_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Select the MD5 mode and reset the HASH processor core, so that the HASH will be ready to compute
- the message digest of a new message */
- HASH->CR |= HASH_ALGOSELECTION_MD5 | HASH_CR_INIT;
- }
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(Size);
-
- /* Write input buffer in data register */
- HASH_WriteData(pInBuffer, Size);
-
- /* Start the digest calculation */
- __HAL_HASH_START_DIGEST();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hhash->State = HAL_HASH_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Read the message digest */
- HASH_GetDigest(pOutBuffer, 16);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the HASH peripheral in MD5 mode then writes the pInBuffer.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is multiple of 64 bytes, appending the input buffer is possible.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware
- * and appending the input buffer is no more possible.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASH_MD5_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
-{
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Select the MD5 mode and reset the HASH processor core, so that the HASH will be ready to compute
- the message digest of a new message */
- HASH->CR |= HASH_ALGOSELECTION_MD5 | HASH_CR_INIT;
- }
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(Size);
-
- /* Write input buffer in data register */
- HASH_WriteData(pInBuffer, Size);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the HASH peripheral in SHA1 mode then processes pInBuffer.
- The digest is available in pOutBuffer.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
- * @param Timeout: Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASH_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Select the SHA1 mode and reset the HASH processor core, so that the HASH will be ready to compute
- the message digest of a new message */
- HASH->CR |= HASH_ALGOSELECTION_SHA1 | HASH_CR_INIT;
- }
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(Size);
-
- /* Write input buffer in data register */
- HASH_WriteData(pInBuffer, Size);
-
- /* Start the digest calculation */
- __HAL_HASH_START_DIGEST();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hhash->State = HAL_HASH_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Read the message digest */
- HASH_GetDigest(pOutBuffer, 20);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the HASH peripheral in SHA1 mode then processes pInBuffer.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @note Input buffer size in bytes must be a multiple of 4 otherwise the digest computation is corrupted.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASH_SHA1_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
-{
-
- /* Check the parameters */
- assert_param(IS_HASH_SHA1_BUFFER_SIZE(Size));
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Select the SHA1 mode and reset the HASH processor core, so that the HASH will be ready to compute
- the message digest of a new message */
- HASH->CR |= HASH_ALGOSELECTION_SHA1 | HASH_CR_INIT;
- }
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(Size);
-
- /* Write input buffer in data register */
- HASH_WriteData(pInBuffer, Size);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup HASH_Exported_Functions_Group3 HASH processing functions using interrupt mode
- * @brief processing functions using interrupt mode.
- *
-@verbatim
- ===============================================================================
- ##### HASH processing using interrupt mode functions #####
- ===============================================================================
- [..] This section provides functions allowing to calculate in interrupt mode
- the hash value using one of the following algorithms:
- (+) MD5
- (+) SHA1
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the HASH peripheral in MD5 mode then processes pInBuffer.
- * The digest is available in pOutBuffer.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @param pOutBuffer: Pointer to the computed digest. Its size must be 16 bytes.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASH_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
- uint32_t buffercounter;
- uint32_t inputcounter;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- if(hhash->State == HAL_HASH_STATE_READY)
- {
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- hhash->HashInCount = Size;
- hhash->pHashInBuffPtr = pInBuffer;
- hhash->pHashOutBuffPtr = pOutBuffer;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Select the SHA1 mode */
- HASH->CR |= HASH_ALGOSELECTION_MD5;
- /* Reset the HASH processor core, so that the HASH will be ready to compute
- the message digest of a new message */
- HASH->CR |= HASH_CR_INIT;
- }
- /* Reset interrupt counter */
- hhash->HashITCounter = 0;
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Enable Interrupts */
- HASH->IMR = (HASH_IT_DINI | HASH_IT_DCI);
-
- /* Return function status */
- return HAL_OK;
- }
- if(__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS))
- {
- outputaddr = (uint32_t)hhash->pHashOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = __REV(HASH->HR[0]);
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = __REV(HASH->HR[1]);
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = __REV(HASH->HR[2]);
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = __REV(HASH->HR[3]);
-
- if(hhash->HashInCount == 0)
- {
- /* Disable Interrupts */
- HASH->IMR = 0;
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_READY;
- /* Call digest computation complete callback */
- HAL_HASH_DgstCpltCallback(hhash);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
- }
- }
- if(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
- {
- if(hhash->HashInCount >= 68)
- {
- inputaddr = (uint32_t)hhash->pHashInBuffPtr;
- /* Write the Input block in the Data IN register */
- for(buffercounter = 0; buffercounter < 64; buffercounter+=4)
- {
- HASH->DIN = *(uint32_t*)inputaddr;
- inputaddr+=4;
- }
- if(hhash->HashITCounter == 0)
- {
- HASH->DIN = *(uint32_t*)inputaddr;
-
- if(hhash->HashInCount >= 68)
- {
- /* Decrement buffer counter */
- hhash->HashInCount -= 68;
- hhash->pHashInBuffPtr+= 68;
- }
- else
- {
- hhash->HashInCount = 0;
- hhash->pHashInBuffPtr+= hhash->HashInCount;
- }
- /* Set Interrupt counter */
- hhash->HashITCounter = 1;
- }
- else
- {
- /* Decrement buffer counter */
- hhash->HashInCount -= 64;
- hhash->pHashInBuffPtr+= 64;
- }
- }
- else
- {
- /* Get the buffer address */
- inputaddr = (uint32_t)hhash->pHashInBuffPtr;
- /* Get the buffer counter */
- inputcounter = hhash->HashInCount;
- /* Disable Interrupts */
- HASH->IMR &= ~(HASH_IT_DINI);
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(inputcounter);
-
- if((inputcounter > 4) && (inputcounter%4))
- {
- inputcounter = (inputcounter+4-inputcounter%4);
- }
- else if ((inputcounter < 4) && (inputcounter != 0))
- {
- inputcounter = 4;
- }
- /* Write the Input block in the Data IN register */
- for(buffercounter = 0; buffercounter < inputcounter/4; buffercounter++)
- {
- HASH->DIN = *(uint32_t*)inputaddr;
- inputaddr+=4;
- }
- /* Start the digest calculation */
- __HAL_HASH_START_DIGEST();
- /* Reset buffer counter */
- hhash->HashInCount = 0;
-
- /* Call Input data transfer complete callback */
- HAL_HASH_InCpltCallback(hhash);
- }
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the HASH peripheral in SHA1 mode then processes pInBuffer.
- * The digest is available in pOutBuffer.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASH_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
-{
- uint32_t inputaddr;
- uint32_t outputaddr;
- uint32_t buffercounter;
- uint32_t inputcounter;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- if(hhash->State == HAL_HASH_STATE_READY)
- {
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- hhash->HashInCount = Size;
- hhash->pHashInBuffPtr = pInBuffer;
- hhash->pHashOutBuffPtr = pOutBuffer;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Select the SHA1 mode */
- HASH->CR |= HASH_ALGOSELECTION_SHA1;
- /* Reset the HASH processor core, so that the HASH will be ready to compute
- the message digest of a new message */
- HASH->CR |= HASH_CR_INIT;
- }
-
- /* Reset interrupt counter */
- hhash->HashITCounter = 0;
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Enable Interrupts */
- HASH->IMR = (HASH_IT_DINI | HASH_IT_DCI);
-
- /* Return function status */
- return HAL_OK;
- }
- if(__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS))
- {
- outputaddr = (uint32_t)hhash->pHashOutBuffPtr;
- /* Read the Output block from the Output FIFO */
- *(uint32_t*)(outputaddr) = __REV(HASH->HR[0]);
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = __REV(HASH->HR[1]);
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = __REV(HASH->HR[2]);
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = __REV(HASH->HR[3]);
- outputaddr+=4;
- *(uint32_t*)(outputaddr) = __REV(HASH->HR[4]);
- if(hhash->HashInCount == 0)
- {
- /* Disable Interrupts */
- HASH->IMR = 0;
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_READY;
- /* Call digest computation complete callback */
- HAL_HASH_DgstCpltCallback(hhash);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
- }
- }
- if(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
- {
- if(hhash->HashInCount >= 68)
- {
- inputaddr = (uint32_t)hhash->pHashInBuffPtr;
- /* Write the Input block in the Data IN register */
- for(buffercounter = 0; buffercounter < 64; buffercounter+=4)
- {
- HASH->DIN = *(uint32_t*)inputaddr;
- inputaddr+=4;
- }
- if(hhash->HashITCounter == 0)
- {
- HASH->DIN = *(uint32_t*)inputaddr;
- if(hhash->HashInCount >= 68)
- {
- /* Decrement buffer counter */
- hhash->HashInCount -= 68;
- hhash->pHashInBuffPtr+= 68;
- }
- else
- {
- hhash->HashInCount = 0;
- hhash->pHashInBuffPtr+= hhash->HashInCount;
- }
- /* Set Interrupt counter */
- hhash->HashITCounter = 1;
- }
- else
- {
- /* Decrement buffer counter */
- hhash->HashInCount -= 64;
- hhash->pHashInBuffPtr+= 64;
- }
- }
- else
- {
- /* Get the buffer address */
- inputaddr = (uint32_t)hhash->pHashInBuffPtr;
- /* Get the buffer counter */
- inputcounter = hhash->HashInCount;
- /* Disable Interrupts */
- HASH->IMR &= ~(HASH_IT_DINI);
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(inputcounter);
-
- if((inputcounter > 4) && (inputcounter%4))
- {
- inputcounter = (inputcounter+4-inputcounter%4);
- }
- else if ((inputcounter < 4) && (inputcounter != 0))
- {
- inputcounter = 4;
- }
- /* Write the Input block in the Data IN register */
- for(buffercounter = 0; buffercounter < inputcounter/4; buffercounter++)
- {
- HASH->DIN = *(uint32_t*)inputaddr;
- inputaddr+=4;
- }
- /* Start the digest calculation */
- __HAL_HASH_START_DIGEST();
- /* Reset buffer counter */
- hhash->HashInCount = 0;
-
- /* Call Input data transfer complete callback */
- HAL_HASH_InCpltCallback(hhash);
- }
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief This function handles HASH interrupt request.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @retval None
- */
-void HAL_HASH_IRQHandler(HASH_HandleTypeDef *hhash)
-{
- switch(HASH->CR & HASH_CR_ALGO)
- {
- case HASH_ALGOSELECTION_MD5:
- HAL_HASH_MD5_Start_IT(hhash, NULL, 0, NULL);
- break;
-
- case HASH_ALGOSELECTION_SHA1:
- HAL_HASH_SHA1_Start_IT(hhash, NULL, 0, NULL);
- break;
-
- default:
- break;
- }
-}
-
-/**
- * @}
- */
-
-/** @defgroup HASH_Exported_Functions_Group4 HASH processing functions using DMA mode
- * @brief processing functions using DMA mode.
- *
-@verbatim
- ===============================================================================
- ##### HASH processing using DMA mode functions #####
- ===============================================================================
- [..] This section provides functions allowing to calculate in DMA mode
- the hash value using one of the following algorithms:
- (+) MD5
- (+) SHA1
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the HASH peripheral in MD5 mode then enables DMA to
- control data transfer. Use HAL_HASH_MD5_Finish() to get the digest.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASH_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
-{
- uint32_t inputaddr = (uint32_t)pInBuffer;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Select the MD5 mode and reset the HASH processor core, so that the HASH will be ready to compute
- the message digest of a new message */
- HASH->CR |= HASH_ALGOSELECTION_MD5 | HASH_CR_INIT;
- }
-
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(Size);
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /* Set the HASH DMA transfer complete callback */
- hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
- /* Set the DMA error callback */
- hhash->hdmain->XferErrorCallback = HASH_DMAError;
-
- /* Enable the DMA In DMA Stream */
- HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (Size%4 ? (Size+3)/4:Size/4));
-
- /* Enable DMA requests */
- HASH->CR |= (HASH_CR_DMAE);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Returns the computed digest in MD5 mode
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pOutBuffer: Pointer to the computed digest. Its size must be 16 bytes.
- * @param Timeout: Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASH_MD5_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change HASH peripheral state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(HASH->SR, HASH_FLAG_DCIS))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hhash->State = HAL_HASH_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Read the message digest */
- HASH_GetDigest(pOutBuffer, 16);
-
- /* Change HASH peripheral state */
- hhash->State = HAL_HASH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the HASH peripheral in SHA1 mode then enables DMA to
- control data transfer. Use HAL_HASH_SHA1_Finish() to get the digest.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASH_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
-{
- uint32_t inputaddr = (uint32_t)pInBuffer;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Select the SHA1 mode and reset the HASH processor core, so that the HASH will be ready to compute
- the message digest of a new message */
- HASH->CR |= HASH_ALGOSELECTION_SHA1;
- HASH->CR |= HASH_CR_INIT;
- }
-
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(Size);
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /* Set the HASH DMA transfer complete callback */
- hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
- /* Set the DMA error callback */
- hhash->hdmain->XferErrorCallback = HASH_DMAError;
-
- /* Enable the DMA In DMA Stream */
- HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (Size%4 ? (Size+3)/4:Size/4));
-
- /* Enable DMA requests */
- HASH->CR |= (HASH_CR_DMAE);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Returns the computed digest in SHA1 mode.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
- * @param Timeout: Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASH_SHA1_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change HASH peripheral state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Get tick */
- tickstart = HAL_GetTick();
- while(HAL_IS_BIT_CLR(HASH->SR, HASH_FLAG_DCIS))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hhash->State = HAL_HASH_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Read the message digest */
- HASH_GetDigest(pOutBuffer, 20);
-
- /* Change HASH peripheral state */
- hhash->State = HAL_HASH_STATE_READY;
-
- /* Process UnLock */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-
-/**
- * @}
- */
-
-/** @defgroup HASH_Exported_Functions_Group5 HASH-MAC (HMAC) processing functions using polling mode
- * @brief HMAC processing functions using polling mode .
- *
-@verbatim
- ===============================================================================
- ##### HMAC processing using polling mode functions #####
- ===============================================================================
- [..] This section provides functions allowing to calculate in polling mode
- the HMAC value using one of the following algorithms:
- (+) MD5
- (+) SHA1
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the HASH peripheral in HMAC MD5 mode
- * then processes pInBuffer. The digest is available in pOutBuffer
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
- * @param Timeout: Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HMAC_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Check if key size is greater than 64 bytes */
- if(hhash->Init.KeySize > 64)
- {
- /* Select the HMAC MD5 mode */
- HASH->CR |= (HASH_ALGOSELECTION_MD5 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
- }
- else
- {
- /* Select the HMAC MD5 mode */
- HASH->CR |= (HASH_ALGOSELECTION_MD5 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
- }
- }
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /************************** STEP 1 ******************************************/
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
-
- /* Write input buffer in data register */
- HASH_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
-
- /* Start the digest calculation */
- __HAL_HASH_START_DIGEST();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hhash->State = HAL_HASH_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /************************** STEP 2 ******************************************/
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(Size);
-
- /* Write input buffer in data register */
- HASH_WriteData(pInBuffer, Size);
-
- /* Start the digest calculation */
- __HAL_HASH_START_DIGEST();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((HAL_GetTick() - tickstart ) > Timeout)
- {
- /* Change state */
- hhash->State = HAL_HASH_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /************************** STEP 3 ******************************************/
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
-
- /* Write input buffer in data register */
- HASH_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
-
- /* Start the digest calculation */
- __HAL_HASH_START_DIGEST();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((HAL_GetTick() - tickstart ) > Timeout)
- {
- /* Change state */
- hhash->State = HAL_HASH_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Read the message digest */
- HASH_GetDigest(pOutBuffer, 16);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the HASH peripheral in HMAC SHA1 mode
- * then processes pInBuffer. The digest is available in pOutBuffer.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
- * @param Timeout: Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HMAC_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Check if key size is greater than 64 bytes */
- if(hhash->Init.KeySize > 64)
- {
- /* Select the HMAC SHA1 mode */
- HASH->CR |= (HASH_ALGOSELECTION_SHA1 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
- }
- else
- {
- /* Select the HMAC SHA1 mode */
- HASH->CR |= (HASH_ALGOSELECTION_SHA1 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
- }
- }
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /************************** STEP 1 ******************************************/
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
-
- /* Write input buffer in data register */
- HASH_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
-
- /* Start the digest calculation */
- __HAL_HASH_START_DIGEST();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hhash->State = HAL_HASH_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /************************** STEP 2 ******************************************/
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(Size);
-
- /* Write input buffer in data register */
- HASH_WriteData(pInBuffer, Size);
-
- /* Start the digest calculation */
- __HAL_HASH_START_DIGEST();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((HAL_GetTick() - tickstart ) > Timeout)
- {
- /* Change state */
- hhash->State = HAL_HASH_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /************************** STEP 3 ******************************************/
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
-
- /* Write input buffer in data register */
- HASH_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
-
- /* Start the digest calculation */
- __HAL_HASH_START_DIGEST();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_SET(HASH->SR, HASH_FLAG_BUSY))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((HAL_GetTick() - tickstart ) > Timeout)
- {
- /* Change state */
- hhash->State = HAL_HASH_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /* Read the message digest */
- HASH_GetDigest(pOutBuffer, 20);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup HASH_Exported_Functions_Group6 HASH-MAC (HMAC) processing functions using DMA mode
- * @brief HMAC processing functions using DMA mode .
- *
-@verbatim
- ===============================================================================
- ##### HMAC processing using DMA mode functions #####
- ===============================================================================
- [..] This section provides functions allowing to calculate in DMA mode
- the HMAC value using one of the following algorithms:
- (+) MD5
- (+) SHA1
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the HASH peripheral in HMAC MD5 mode
- * then enables DMA to control data transfer.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HMAC_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
-{
- uint32_t inputaddr = 0;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Save buffer pointer and size in handle */
- hhash->pHashInBuffPtr = pInBuffer;
- hhash->HashBuffSize = Size;
- hhash->HashInCount = 0;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Check if key size is greater than 64 bytes */
- if(hhash->Init.KeySize > 64)
- {
- /* Select the HMAC MD5 mode */
- HASH->CR |= (HASH_ALGOSELECTION_MD5 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
- }
- else
- {
- /* Select the HMAC MD5 mode */
- HASH->CR |= (HASH_ALGOSELECTION_MD5 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
- }
- }
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
-
- /* Get the key address */
- inputaddr = (uint32_t)(hhash->Init.pKey);
-
- /* Set the HASH DMA transfer complete callback */
- hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
- /* Set the DMA error callback */
- hhash->hdmain->XferErrorCallback = HASH_DMAError;
-
- /* Enable the DMA In DMA Stream */
- HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (hhash->Init.KeySize%4 ? (hhash->Init.KeySize+3)/4:hhash->Init.KeySize/4));
- /* Enable DMA requests */
- HASH->CR |= (HASH_CR_DMAE);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the HASH peripheral in HMAC SHA1 mode
- * then enables DMA to control data transfer.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HMAC_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
-{
- uint32_t inputaddr = 0;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Save buffer pointer and size in handle */
- hhash->pHashInBuffPtr = pInBuffer;
- hhash->HashBuffSize = Size;
- hhash->HashInCount = 0;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Check if key size is greater than 64 bytes */
- if(hhash->Init.KeySize > 64)
- {
- /* Select the HMAC SHA1 mode */
- HASH->CR |= (HASH_ALGOSELECTION_SHA1 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
- }
- else
- {
- /* Select the HMAC SHA1 mode */
- HASH->CR |= (HASH_ALGOSELECTION_SHA1 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
- }
- }
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
-
- /* Get the key address */
- inputaddr = (uint32_t)(hhash->Init.pKey);
-
- /* Set the HASH DMA transfer complete callback */
- hhash->hdmain->XferCpltCallback = HASH_DMAXferCplt;
- /* Set the DMA error callback */
- hhash->hdmain->XferErrorCallback = HASH_DMAError;
-
- /* Enable the DMA In DMA Stream */
- HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (hhash->Init.KeySize%4 ? (hhash->Init.KeySize+3)/4:hhash->Init.KeySize/4));
- /* Enable DMA requests */
- HASH->CR |= (HASH_CR_DMAE);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup HASH_Exported_Functions_Group7 Peripheral State functions
- * @brief Peripheral State functions.
- *
-@verbatim
- ===============================================================================
- ##### Peripheral State functions #####
- ===============================================================================
- [..]
- This subsection permits to get in run-time the status of the peripheral.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief return the HASH state
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @retval HAL state
- */
-HAL_HASH_STATETypeDef HAL_HASH_GetState(HASH_HandleTypeDef *hhash)
-{
- return hhash->State;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx */
-#endif /* HAL_HASH_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash_ex.c
deleted file mode 100644
index e05c88a..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hash_ex.c
+++ /dev/null
@@ -1,1642 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_hash_ex.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief HASH HAL Extension module driver.
- * This file provides firmware functions to manage the following
- * functionalities of HASH peripheral:
- * + Extended HASH processing functions based on SHA224 Algorithm
- * + Extended HASH processing functions based on SHA256 Algorithm
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- The HASH HAL driver can be used as follows:
- (#)Initialize the HASH low level resources by implementing the HAL_HASH_MspInit():
- (##) Enable the HASH interface clock using __HAL_RCC_HASH_CLK_ENABLE()
- (##) In case of using processing APIs based on interrupts (e.g. HAL_HMACEx_SHA224_Start())
- (+++) Configure the HASH interrupt priority using HAL_NVIC_SetPriority()
- (+++) Enable the HASH IRQ handler using HAL_NVIC_EnableIRQ()
- (+++) In HASH IRQ handler, call HAL_HASH_IRQHandler()
- (##) In case of using DMA to control data transfer (e.g. HAL_HMACEx_SH224_Start_DMA())
- (+++) Enable the DMAx interface clock using __DMAx_CLK_ENABLE()
- (+++) Configure and enable one DMA stream one for managing data transfer from
- memory to peripheral (input stream). Managing data transfer from
- peripheral to memory can be performed only using CPU
- (+++) Associate the initialized DMA handle to the HASH DMA handle
- using __HAL_LINKDMA()
- (+++) Configure the priority and enable the NVIC for the transfer complete
- interrupt on the DMA Stream: HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ()
- (#)Initialize the HASH HAL using HAL_HASH_Init(). This function configures mainly:
- (##) The data type: 1-bit, 8-bit, 16-bit and 32-bit.
- (##) For HMAC, the encryption key.
- (##) For HMAC, the key size used for encryption.
- (#)Three processing functions are available:
- (##) Polling mode: processing APIs are blocking functions
- i.e. they process the data and wait till the digest computation is finished
- e.g. HAL_HASHEx_SHA224_Start()
- (##) Interrupt mode: encryption and decryption APIs are not blocking functions
- i.e. they process the data under interrupt
- e.g. HAL_HASHEx_SHA224_Start_IT()
- (##) DMA mode: processing APIs are not blocking functions and the CPU is
- not used for data transfer i.e. the data transfer is ensured by DMA
- e.g. HAL_HASHEx_SHA224_Start_DMA()
- (#)When the processing function is called at first time after HAL_HASH_Init()
- the HASH peripheral is initialized and processes the buffer in input.
- After that, the digest computation is started.
- When processing multi-buffer use the accumulate function to write the
- data in the peripheral without starting the digest computation. In last
- buffer use the start function to input the last buffer ans start the digest
- computation.
- (##) e.g. HAL_HASHEx_SHA224_Accumulate() : write 1st data buffer in the peripheral without starting the digest computation
- (##) write (n-1)th data buffer in the peripheral without starting the digest computation
- (##) HAL_HASHEx_SHA224_Start() : write (n)th data buffer in the peripheral and start the digest computation
- (#)In HMAC mode, there is no Accumulate API. Only Start API is available.
- (#)In case of using DMA, call the DMA start processing e.g. HAL_HASHEx_SHA224_Start_DMA().
- After that, call the finish function in order to get the digest value
- e.g. HAL_HASHEx_SHA224_Finish()
- (#)Call HAL_HASH_DeInit() to deinitialize the HASH peripheral.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup HASHEx HASHEx
- * @brief HASH Extension HAL module driver.
- * @{
- */
-
-#ifdef HAL_HASH_MODULE_ENABLED
-
-#if defined(STM32F437xx) || defined(STM32F439xx)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @addtogroup HASHEx_Private_Functions
- * @{
- */
-static void HASHEx_DMAXferCplt(DMA_HandleTypeDef *hdma);
-static void HASHEx_WriteData(uint8_t *pInBuffer, uint32_t Size);
-static void HASHEx_GetDigest(uint8_t *pMsgDigest, uint8_t Size);
-static void HASHEx_DMAError(DMA_HandleTypeDef *hdma);
-/**
- * @}
- */
-
-/* Private functions ---------------------------------------------------------*/
-
-/** @addtogroup HASHEx_Private_Functions
- * @{
- */
-
-/**
- * @brief Writes the input buffer in data register.
- * @param pInBuffer: Pointer to input buffer
- * @param Size: The size of input buffer
- * @retval None
- */
-static void HASHEx_WriteData(uint8_t *pInBuffer, uint32_t Size)
-{
- uint32_t buffercounter;
- uint32_t inputaddr = (uint32_t) pInBuffer;
-
- for(buffercounter = 0; buffercounter < Size; buffercounter+=4)
- {
- HASH->DIN = *(uint32_t*)inputaddr;
- inputaddr+=4;
- }
-}
-
-/**
- * @brief Provides the message digest result.
- * @param pMsgDigest: Pointer to the message digest
- * @param Size: The size of the message digest in bytes
- * @retval None
- */
-static void HASHEx_GetDigest(uint8_t *pMsgDigest, uint8_t Size)
-{
- uint32_t msgdigest = (uint32_t)pMsgDigest;
-
- switch(Size)
- {
- case 16:
- /* Read the message digest */
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
- break;
- case 20:
- /* Read the message digest */
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[4]);
- break;
- case 28:
- /* Read the message digest */
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[4]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[5]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[6]);
- break;
- case 32:
- /* Read the message digest */
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[0]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[1]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[2]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[3]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH->HR[4]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[5]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[6]);
- msgdigest+=4;
- *(uint32_t*)(msgdigest) = __REV(HASH_DIGEST->HR[7]);
- break;
- default:
- break;
- }
-}
-
-/**
- * @brief DMA HASH Input Data complete callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void HASHEx_DMAXferCplt(DMA_HandleTypeDef *hdma)
-{
- HASH_HandleTypeDef* hhash = ( HASH_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- uint32_t inputaddr = 0;
- uint32_t buffersize = 0;
-
- if((HASH->CR & HASH_CR_MODE) != HASH_CR_MODE)
- {
- /* Disable the DMA transfer */
- HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
-
- /* Change HASH peripheral state */
- hhash->State = HAL_HASH_STATE_READY;
-
- /* Call Input data transfer complete callback */
- HAL_HASH_InCpltCallback(hhash);
- }
- else
- {
- /* Increment Interrupt counter */
- hhash->HashInCount++;
- /* Disable the DMA transfer before starting the next transfer */
- HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
-
- if(hhash->HashInCount <= 2)
- {
- /* In case HashInCount = 1, set the DMA to transfer data to HASH DIN register */
- if(hhash->HashInCount == 1)
- {
- inputaddr = (uint32_t)hhash->pHashInBuffPtr;
- buffersize = hhash->HashBuffSize;
- }
- /* In case HashInCount = 2, set the DMA to transfer key to HASH DIN register */
- else if(hhash->HashInCount == 2)
- {
- inputaddr = (uint32_t)hhash->Init.pKey;
- buffersize = hhash->Init.KeySize;
- }
- /* Configure the number of valid bits in last word of the message */
- MODIFY_REG(HASH->STR, HASH_STR_NBLW, 8 * (buffersize % 4));
-
- /* Set the HASH DMA transfer complete */
- hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
-
- /* Enable the DMA In DMA Stream */
- HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (buffersize%4 ? (buffersize+3)/4:buffersize/4));
-
- /* Enable DMA requests */
- HASH->CR |= (HASH_CR_DMAE);
- }
- else
- {
- /* Disable the DMA transfer */
- HASH->CR &= (uint32_t)(~HASH_CR_DMAE);
-
- /* Reset the InCount */
- hhash->HashInCount = 0;
-
- /* Change HASH peripheral state */
- hhash->State = HAL_HASH_STATE_READY;
-
- /* Call Input data transfer complete callback */
- HAL_HASH_InCpltCallback(hhash);
- }
- }
-}
-
-/**
- * @brief DMA HASH communication error callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void HASHEx_DMAError(DMA_HandleTypeDef *hdma)
-{
- HASH_HandleTypeDef* hhash = ( HASH_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- hhash->State= HAL_HASH_STATE_READY;
- HAL_HASH_ErrorCallback(hhash);
-}
-
- /**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup HASHEx_Exported_Functions
- * @{
- */
-
-/** @defgroup HASHEx_Group1 HASH processing functions
- * @brief processing functions using polling mode
- *
-@verbatim
- ===============================================================================
- ##### HASH processing using polling mode functions #####
- ===============================================================================
- [..] This section provides functions allowing to calculate in polling mode
- the hash value using one of the following algorithms:
- (+) SHA224
- (+) SHA256
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the HASH peripheral in SHA224 mode
- * then processes pInBuffer. The digest is available in pOutBuffer
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @param pOutBuffer: Pointer to the computed digest. Its size must be 28 bytes.
- * @param Timeout: Specify Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASHEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Select the SHA224 mode and reset the HASH processor core, so that the HASH will be ready to compute
- the message digest of a new message */
- HASH->CR |= HASH_ALGOSELECTION_SHA224 | HASH_CR_INIT;
- }
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(Size);
-
- /* Write input buffer in data register */
- HASHEx_WriteData(pInBuffer, Size);
-
- /* Start the digest calculation */
- __HAL_HASH_START_DIGEST();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hhash->State = HAL_HASH_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Read the message digest */
- HASHEx_GetDigest(pOutBuffer, 28);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the HASH peripheral in SHA256 mode then processes pInBuffer.
- The digest is available in pOutBuffer.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @param pOutBuffer: Pointer to the computed digest. Its size must be 32 bytes.
- * @param Timeout: Specify Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASHEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Select the SHA256 mode and reset the HASH processor core, so that the HASH will be ready to compute
- the message digest of a new message */
- HASH->CR |= HASH_ALGOSELECTION_SHA256 | HASH_CR_INIT;
- }
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(Size);
-
- /* Write input buffer in data register */
- HASHEx_WriteData(pInBuffer, Size);
-
- /* Start the digest calculation */
- __HAL_HASH_START_DIGEST();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hhash->State = HAL_HASH_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Read the message digest */
- HASHEx_GetDigest(pOutBuffer, 32);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-
-/**
- * @brief Initializes the HASH peripheral in SHA224 mode
- * then processes pInBuffer. The digest is available in pOutBuffer
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASHEx_SHA224_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
-{
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Select the SHA224 mode and reset the HASH processor core, so that the HASH will be ready to compute
- the message digest of a new message */
- HASH->CR |= HASH_ALGOSELECTION_SHA224 | HASH_CR_INIT;
- }
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(Size);
-
- /* Write input buffer in data register */
- HASHEx_WriteData(pInBuffer, Size);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-
-/**
- * @brief Initializes the HASH peripheral in SHA256 mode then processes pInBuffer.
- The digest is available in pOutBuffer.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASHEx_SHA256_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
-{
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Select the SHA256 mode and reset the HASH processor core, so that the HASH will be ready to compute
- the message digest of a new message */
- HASH->CR |= HASH_ALGOSELECTION_SHA256 | HASH_CR_INIT;
- }
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(Size);
-
- /* Write input buffer in data register */
- HASHEx_WriteData(pInBuffer, Size);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-
-/**
- * @}
- */
-
-/** @defgroup HASHEx_Group2 HMAC processing functions using polling mode
- * @brief HMAC processing functions using polling mode .
- *
-@verbatim
- ===============================================================================
- ##### HMAC processing using polling mode functions #####
- ===============================================================================
- [..] This section provides functions allowing to calculate in polling mode
- the HMAC value using one of the following algorithms:
- (+) SHA224
- (+) SHA256
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the HASH peripheral in HMAC SHA224 mode
- * then processes pInBuffer. The digest is available in pOutBuffer.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
- * @param Timeout: Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HMACEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Check if key size is greater than 64 bytes */
- if(hhash->Init.KeySize > 64)
- {
- /* Select the HMAC SHA224 mode */
- HASH->CR |= (HASH_ALGOSELECTION_SHA224 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
- }
- else
- {
- /* Select the HMAC SHA224 mode */
- HASH->CR |= (HASH_ALGOSELECTION_SHA224 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
- }
- }
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /************************** STEP 1 ******************************************/
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
-
- /* Write input buffer in data register */
- HASHEx_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
-
- /* Start the digest calculation */
- __HAL_HASH_START_DIGEST();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hhash->State = HAL_HASH_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /************************** STEP 2 ******************************************/
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(Size);
-
- /* Write input buffer in data register */
- HASHEx_WriteData(pInBuffer, Size);
-
- /* Start the digest calculation */
- __HAL_HASH_START_DIGEST();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((HAL_GetTick() - tickstart ) > Timeout)
- {
- /* Change state */
- hhash->State = HAL_HASH_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /************************** STEP 3 ******************************************/
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
-
- /* Write input buffer in data register */
- HASHEx_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
-
- /* Start the digest calculation */
- __HAL_HASH_START_DIGEST();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((HAL_GetTick() - tickstart ) > Timeout)
- {
- /* Change state */
- hhash->State = HAL_HASH_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /* Read the message digest */
- HASHEx_GetDigest(pOutBuffer, 28);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the HASH peripheral in HMAC SHA256 mode
- * then processes pInBuffer. The digest is available in pOutBuffer
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
- * @param Timeout: Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HMACEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Check if key size is greater than 64 bytes */
- if(hhash->Init.KeySize > 64)
- {
- /* Select the HMAC SHA256 mode */
- HASH->CR |= (HASH_ALGOSELECTION_SHA256 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY);
- }
- else
- {
- /* Select the HMAC SHA256 mode */
- HASH->CR |= (HASH_ALGOSELECTION_SHA256 | HASH_ALGOMODE_HMAC);
- }
- /* Reset the HASH processor core, so that the HASH will be ready to compute
- the message digest of a new message */
- HASH->CR |= HASH_CR_INIT;
- }
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /************************** STEP 1 ******************************************/
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
-
- /* Write input buffer in data register */
- HASHEx_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
-
- /* Start the digest calculation */
- __HAL_HASH_START_DIGEST();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hhash->State = HAL_HASH_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /************************** STEP 2 ******************************************/
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(Size);
-
- /* Write input buffer in data register */
- HASHEx_WriteData(pInBuffer, Size);
-
- /* Start the digest calculation */
- __HAL_HASH_START_DIGEST();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((HAL_GetTick() - tickstart ) > Timeout)
- {
- /* Change state */
- hhash->State = HAL_HASH_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /************************** STEP 3 ******************************************/
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
-
- /* Write input buffer in data register */
- HASHEx_WriteData(hhash->Init.pKey, hhash->Init.KeySize);
-
- /* Start the digest calculation */
- __HAL_HASH_START_DIGEST();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((HASH->SR & HASH_FLAG_BUSY) == HASH_FLAG_BUSY)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((HAL_GetTick() - tickstart ) > Timeout)
- {
- /* Change state */
- hhash->State = HAL_HASH_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /* Read the message digest */
- HASHEx_GetDigest(pOutBuffer, 32);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup HASHEx_Group3 HASH processing functions using interrupt mode
- * @brief processing functions using interrupt mode.
- *
-@verbatim
- ===============================================================================
- ##### HASH processing using interrupt functions #####
- ===============================================================================
- [..] This section provides functions allowing to calculate in interrupt mode
- the hash value using one of the following algorithms:
- (+) SHA224
- (+) SHA256
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the HASH peripheral in SHA224 mode then processes pInBuffer.
- * The digest is available in pOutBuffer.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
-{
- uint32_t inputaddr;
- uint32_t buffercounter;
- uint32_t inputcounter;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- if(hhash->State == HAL_HASH_STATE_READY)
- {
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- hhash->HashInCount = Size;
- hhash->pHashInBuffPtr = pInBuffer;
- hhash->pHashOutBuffPtr = pOutBuffer;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Select the SHA224 mode */
- HASH->CR |= HASH_ALGOSELECTION_SHA224;
- /* Reset the HASH processor core, so that the HASH will be ready to compute
- the message digest of a new message */
- HASH->CR |= HASH_CR_INIT;
- }
-
- /* Reset interrupt counter */
- hhash->HashITCounter = 0;
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Enable Interrupts */
- HASH->IMR = (HASH_IT_DINI | HASH_IT_DCI);
-
- /* Return function status */
- return HAL_OK;
- }
- if(__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS))
- {
- /* Read the message digest */
- HASHEx_GetDigest(hhash->pHashOutBuffPtr, 28);
- if(hhash->HashInCount == 0)
- {
- /* Disable Interrupts */
- HASH->IMR = 0;
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_READY;
- /* Call digest computation complete callback */
- HAL_HASH_DgstCpltCallback(hhash);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
- }
- }
- if(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
- {
- if(hhash->HashInCount >= 68)
- {
- inputaddr = (uint32_t)hhash->pHashInBuffPtr;
- /* Write the Input block in the Data IN register */
- for(buffercounter = 0; buffercounter < 64; buffercounter+=4)
- {
- HASH->DIN = *(uint32_t*)inputaddr;
- inputaddr+=4;
- }
- if(hhash->HashITCounter == 0)
- {
- HASH->DIN = *(uint32_t*)inputaddr;
-
- if(hhash->HashInCount >= 68)
- {
- /* Decrement buffer counter */
- hhash->HashInCount -= 68;
- hhash->pHashInBuffPtr+= 68;
- }
- else
- {
- hhash->HashInCount = 0;
- hhash->pHashInBuffPtr+= hhash->HashInCount;
- }
- /* Set Interrupt counter */
- hhash->HashITCounter = 1;
- }
- else
- {
- /* Decrement buffer counter */
- hhash->HashInCount -= 64;
- hhash->pHashInBuffPtr+= 64;
- }
- }
- else
- {
- /* Get the buffer address */
- inputaddr = (uint32_t)hhash->pHashInBuffPtr;
- /* Get the buffer counter */
- inputcounter = hhash->HashInCount;
- /* Disable Interrupts */
- HASH->IMR &= ~(HASH_IT_DINI);
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(inputcounter);
-
- if((inputcounter > 4) && (inputcounter%4))
- {
- inputcounter = (inputcounter+4-inputcounter%4);
- }
- else if ((inputcounter < 4) && (inputcounter != 0))
- {
- inputcounter = 4;
- }
- /* Write the Input block in the Data IN register */
- for(buffercounter = 0; buffercounter < inputcounter/4; buffercounter++)
- {
- HASH->DIN = *(uint32_t*)inputaddr;
- inputaddr+=4;
- }
- /* Start the digest calculation */
- __HAL_HASH_START_DIGEST();
- /* Reset buffer counter */
- hhash->HashInCount = 0;
-
- /* Call Input data transfer complete callback */
- HAL_HASH_InCpltCallback(hhash);
- }
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-
-/**
- * @brief Initializes the HASH peripheral in SHA256 mode then processes pInBuffer.
- * The digest is available in pOutBuffer.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @param pOutBuffer: Pointer to the computed digest. Its size must be 20 bytes.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer)
-{
- uint32_t inputaddr;
- uint32_t buffercounter;
- uint32_t inputcounter;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- if(hhash->State == HAL_HASH_STATE_READY)
- {
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- hhash->HashInCount = Size;
- hhash->pHashInBuffPtr = pInBuffer;
- hhash->pHashOutBuffPtr = pOutBuffer;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Select the SHA256 mode */
- HASH->CR |= HASH_ALGOSELECTION_SHA256;
- /* Reset the HASH processor core, so that the HASH will be ready to compute
- the message digest of a new message */
- HASH->CR |= HASH_CR_INIT;
- }
-
- /* Reset interrupt counter */
- hhash->HashITCounter = 0;
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Enable Interrupts */
- HASH->IMR = (HASH_IT_DINI | HASH_IT_DCI);
-
- /* Return function status */
- return HAL_OK;
- }
- if(__HAL_HASH_GET_FLAG(HASH_FLAG_DCIS))
- {
- /* Read the message digest */
- HASHEx_GetDigest(hhash->pHashOutBuffPtr, 32);
- if(hhash->HashInCount == 0)
- {
- /* Disable Interrupts */
- HASH->IMR = 0;
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_READY;
- /* Call digest computation complete callback */
- HAL_HASH_DgstCpltCallback(hhash);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
- }
- }
- if(__HAL_HASH_GET_FLAG(HASH_FLAG_DINIS))
- {
- if(hhash->HashInCount >= 68)
- {
- inputaddr = (uint32_t)hhash->pHashInBuffPtr;
- /* Write the Input block in the Data IN register */
- for(buffercounter = 0; buffercounter < 64; buffercounter+=4)
- {
- HASH->DIN = *(uint32_t*)inputaddr;
- inputaddr+=4;
- }
- if(hhash->HashITCounter == 0)
- {
- HASH->DIN = *(uint32_t*)inputaddr;
-
- if(hhash->HashInCount >= 68)
- {
- /* Decrement buffer counter */
- hhash->HashInCount -= 68;
- hhash->pHashInBuffPtr+= 68;
- }
- else
- {
- hhash->HashInCount = 0;
- hhash->pHashInBuffPtr+= hhash->HashInCount;
- }
- /* Set Interrupt counter */
- hhash->HashITCounter = 1;
- }
- else
- {
- /* Decrement buffer counter */
- hhash->HashInCount -= 64;
- hhash->pHashInBuffPtr+= 64;
- }
- }
- else
- {
- /* Get the buffer address */
- inputaddr = (uint32_t)hhash->pHashInBuffPtr;
- /* Get the buffer counter */
- inputcounter = hhash->HashInCount;
- /* Disable Interrupts */
- HASH->IMR &= ~(HASH_IT_DINI);
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(inputcounter);
-
- if((inputcounter > 4) && (inputcounter%4))
- {
- inputcounter = (inputcounter+4-inputcounter%4);
- }
- else if ((inputcounter < 4) && (inputcounter != 0))
- {
- inputcounter = 4;
- }
- /* Write the Input block in the Data IN register */
- for(buffercounter = 0; buffercounter < inputcounter/4; buffercounter++)
- {
- HASH->DIN = *(uint32_t*)inputaddr;
- inputaddr+=4;
- }
- /* Start the digest calculation */
- __HAL_HASH_START_DIGEST();
- /* Reset buffer counter */
- hhash->HashInCount = 0;
-
- /* Call Input data transfer complete callback */
- HAL_HASH_InCpltCallback(hhash);
- }
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief This function handles HASH interrupt request.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @retval None
- */
-void HAL_HASHEx_IRQHandler(HASH_HandleTypeDef *hhash)
-{
- switch(HASH->CR & HASH_CR_ALGO)
- {
-
- case HASH_ALGOSELECTION_SHA224:
- HAL_HASHEx_SHA224_Start_IT(hhash, NULL, 0, NULL);
- break;
-
- case HASH_ALGOSELECTION_SHA256:
- HAL_HASHEx_SHA256_Start_IT(hhash, NULL, 0, NULL);
- break;
-
- default:
- break;
- }
-}
-
-/**
- * @}
- */
-
-/** @defgroup HASHEx_Group4 HASH processing functions using DMA mode
- * @brief processing functions using DMA mode.
- *
-@verbatim
- ===============================================================================
- ##### HASH processing using DMA functions #####
- ===============================================================================
- [..] This section provides functions allowing to calculate in DMA mode
- the hash value using one of the following algorithms:
- (+) SHA224
- (+) SHA256
-
-@endverbatim
- * @{
- */
-
-
-/**
- * @brief Initializes the HASH peripheral in SHA224 mode then enables DMA to
- control data transfer. Use HAL_HASH_SHA224_Finish() to get the digest.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
-{
- uint32_t inputaddr = (uint32_t)pInBuffer;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Select the SHA224 mode and reset the HASH processor core, so that the HASH will be ready to compute
- the message digest of a new message */
- HASH->CR |= HASH_ALGOSELECTION_SHA224 | HASH_CR_INIT;
- }
-
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(Size);
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /* Set the HASH DMA transfer complete callback */
- hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
- /* Set the DMA error callback */
- hhash->hdmain->XferErrorCallback = HASHEx_DMAError;
-
- /* Enable the DMA In DMA Stream */
- HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (Size%4 ? (Size+3)/4:Size/4));
-
- /* Enable DMA requests */
- HASH->CR |= (HASH_CR_DMAE);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Returns the computed digest in SHA224
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pOutBuffer: Pointer to the computed digest. Its size must be 28 bytes.
- * @param Timeout: Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASHEx_SHA224_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change HASH peripheral state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(HASH->SR, HASH_FLAG_DCIS))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hhash->State = HAL_HASH_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Read the message digest */
- HASHEx_GetDigest(pOutBuffer, 28);
-
- /* Change HASH peripheral state */
- hhash->State = HAL_HASH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the HASH peripheral in SHA256 mode then enables DMA to
- control data transfer. Use HAL_HASH_SHA256_Finish() to get the digest.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
-{
- uint32_t inputaddr = (uint32_t)pInBuffer;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Select the SHA256 mode and reset the HASH processor core, so that the HASH will be ready to compute
- the message digest of a new message */
- HASH->CR |= HASH_ALGOSELECTION_SHA256 | HASH_CR_INIT;
- }
-
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(Size);
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /* Set the HASH DMA transfer complete callback */
- hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
- /* Set the DMA error callback */
- hhash->hdmain->XferErrorCallback = HASHEx_DMAError;
-
- /* Enable the DMA In DMA Stream */
- HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (Size%4 ? (Size+3)/4:Size/4));
-
- /* Enable DMA requests */
- HASH->CR |= (HASH_CR_DMAE);
-
- /* Process UnLock */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Returns the computed digest in SHA256.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pOutBuffer: Pointer to the computed digest. Its size must be 32 bytes.
- * @param Timeout: Timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HASHEx_SHA256_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change HASH peripheral state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(HAL_IS_BIT_CLR(HASH->SR, HASH_FLAG_DCIS))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Change state */
- hhash->State = HAL_HASH_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Read the message digest */
- HASHEx_GetDigest(pOutBuffer, 32);
-
- /* Change HASH peripheral state */
- hhash->State = HAL_HASH_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-
-/**
- * @}
- */
-/** @defgroup HASHEx_Group5 HMAC processing functions using DMA mode
- * @brief HMAC processing functions using DMA mode .
- *
-@verbatim
- ===============================================================================
- ##### HMAC processing using DMA functions #####
- ===============================================================================
- [..] This section provides functions allowing to calculate in DMA mode
- the HMAC value using one of the following algorithms:
- (+) SHA224
- (+) SHA256
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the HASH peripheral in HMAC SHA224 mode
- * then enables DMA to control data transfer.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
-{
- uint32_t inputaddr;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Save buffer pointer and size in handle */
- hhash->pHashInBuffPtr = pInBuffer;
- hhash->HashBuffSize = Size;
- hhash->HashInCount = 0;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Check if key size is greater than 64 bytes */
- if(hhash->Init.KeySize > 64)
- {
- /* Select the HMAC SHA224 mode */
- HASH->CR |= (HASH_ALGOSELECTION_SHA224 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY | HASH_CR_INIT);
- }
- else
- {
- /* Select the HMAC SHA224 mode */
- HASH->CR |= (HASH_ALGOSELECTION_SHA224 | HASH_ALGOMODE_HMAC | HASH_CR_INIT);
- }
- }
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
-
- /* Get the key address */
- inputaddr = (uint32_t)(hhash->Init.pKey);
-
- /* Set the HASH DMA transfer complete callback */
- hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
- /* Set the DMA error callback */
- hhash->hdmain->XferErrorCallback = HASHEx_DMAError;
-
- /* Enable the DMA In DMA Stream */
- HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (hhash->Init.KeySize%4 ? (hhash->Init.KeySize+3)/4:hhash->Init.KeySize/4));
- /* Enable DMA requests */
- HASH->CR |= (HASH_CR_DMAE);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the HASH peripheral in HMAC SHA256 mode
- * then enables DMA to control data transfer.
- * @param hhash: pointer to a HASH_HandleTypeDef structure that contains
- * the configuration information for HASH module
- * @param pInBuffer: Pointer to the input buffer (buffer to be hashed).
- * @param Size: Length of the input buffer in bytes.
- * If the Size is not multiple of 64 bytes, the padding is managed by hardware.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size)
-{
- uint32_t inputaddr;
-
- /* Process Locked */
- __HAL_LOCK(hhash);
-
- /* Change the HASH state */
- hhash->State = HAL_HASH_STATE_BUSY;
-
- /* Save buffer pointer and size in handle */
- hhash->pHashInBuffPtr = pInBuffer;
- hhash->HashBuffSize = Size;
- hhash->HashInCount = 0;
-
- /* Check if initialization phase has already been performed */
- if(hhash->Phase == HAL_HASH_PHASE_READY)
- {
- /* Check if key size is greater than 64 bytes */
- if(hhash->Init.KeySize > 64)
- {
- /* Select the HMAC SHA256 mode */
- HASH->CR |= (HASH_ALGOSELECTION_SHA256 | HASH_ALGOMODE_HMAC | HASH_HMAC_KEYTYPE_LONGKEY);
- }
- else
- {
- /* Select the HMAC SHA256 mode */
- HASH->CR |= (HASH_ALGOSELECTION_SHA256 | HASH_ALGOMODE_HMAC);
- }
- /* Reset the HASH processor core, so that the HASH will be ready to compute
- the message digest of a new message */
- HASH->CR |= HASH_CR_INIT;
- }
-
- /* Set the phase */
- hhash->Phase = HAL_HASH_PHASE_PROCESS;
-
- /* Configure the number of valid bits in last word of the message */
- __HAL_HASH_SET_NBVALIDBITS(hhash->Init.KeySize);
-
- /* Get the key address */
- inputaddr = (uint32_t)(hhash->Init.pKey);
-
- /* Set the HASH DMA transfer complete callback */
- hhash->hdmain->XferCpltCallback = HASHEx_DMAXferCplt;
- /* Set the DMA error callback */
- hhash->hdmain->XferErrorCallback = HASHEx_DMAError;
-
- /* Enable the DMA In DMA Stream */
- HAL_DMA_Start_IT(hhash->hdmain, inputaddr, (uint32_t)&HASH->DIN, (hhash->Init.KeySize%4 ? (hhash->Init.KeySize+3)/4:hhash->Init.KeySize/4));
- /* Enable DMA requests */
- HASH->CR |= (HASH_CR_DMAE);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hhash);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-#endif /* STM32F437xx || STM32F439xx */
-
-#endif /* HAL_HASH_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hcd.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hcd.c
deleted file mode 100644
index c441ec2..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_hcd.c
+++ /dev/null
@@ -1,1215 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_hcd.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief HCD HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the USB Peripheral Controller:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral Control functions
- * + Peripheral State functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (#)Declare a HCD_HandleTypeDef handle structure, for example:
- HCD_HandleTypeDef hhcd;
-
- (#)Fill parameters of Init structure in HCD handle
-
- (#)Call HAL_HCD_Init() API to initialize the HCD peripheral (Core, Host core, ...)
-
- (#)Initialize the HCD low level resources through the HAL_HCD_MspInit() API:
- (##) Enable the HCD/USB Low Level interface clock using the following macros
- (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
- (+++) __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); (For High Speed Mode)
- (+++) __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE(); (For High Speed Mode)
-
- (##) Initialize the related GPIO clocks
- (##) Configure HCD pin-out
- (##) Configure HCD NVIC interrupt
-
- (#)Associate the Upper USB Host stack to the HAL HCD Driver:
- (##) hhcd.pData = phost;
-
- (#)Enable HCD transmission and reception:
- (##) HAL_HCD_Start();
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup HCD HCD
- * @brief HCD HAL module driver
- * @{
- */
-
-#ifdef HAL_HCD_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @defgroup HCD_Private_Functions HCD Private Functions
- * @{
- */
-static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum);
-static void HCD_HC_OUT_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum);
-static void HCD_RXQLVL_IRQHandler(HCD_HandleTypeDef *hhcd);
-static void HCD_Port_IRQHandler(HCD_HandleTypeDef *hhcd);
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup HCD_Exported_Functions HCD Exported Functions
- * @{
- */
-
-/** @defgroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initialize the host driver.
- * @param hhcd: HCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd)
-{
- /* Check the HCD handle allocation */
- if(hhcd == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_HCD_ALL_INSTANCE(hhcd->Instance));
-
- hhcd->State = HAL_HCD_STATE_BUSY;
-
- /* Init the low level hardware : GPIO, CLOCK, NVIC... */
- HAL_HCD_MspInit(hhcd);
-
- /* Disable the Interrupts */
- __HAL_HCD_DISABLE(hhcd);
-
- /* Init the Core (common init.) */
- USB_CoreInit(hhcd->Instance, hhcd->Init);
-
- /* Force Host Mode*/
- USB_SetCurrentMode(hhcd->Instance , USB_OTG_HOST_MODE);
-
- /* Init Host */
- USB_HostInit(hhcd->Instance, hhcd->Init);
-
- hhcd->State= HAL_HCD_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Initialize a host channel.
- * @param hhcd: HCD handle
- * @param ch_num: Channel number.
- * This parameter can be a value from 1 to 15
- * @param epnum: Endpoint number.
- * This parameter can be a value from 1 to 15
- * @param dev_address : Current device address
- * This parameter can be a value from 0 to 255
- * @param speed: Current device speed.
- * This parameter can be one of these values:
- * HCD_SPEED_HIGH: High speed mode,
- * HCD_SPEED_FULL: Full speed mode,
- * HCD_SPEED_LOW: Low speed mode
- * @param ep_type: Endpoint Type.
- * This parameter can be one of these values:
- * EP_TYPE_CTRL: Control type,
- * EP_TYPE_ISOC: Isochronous type,
- * EP_TYPE_BULK: Bulk type,
- * EP_TYPE_INTR: Interrupt type
- * @param mps: Max Packet Size.
- * This parameter can be a value from 0 to32K
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd,
- uint8_t ch_num,
- uint8_t epnum,
- uint8_t dev_address,
- uint8_t speed,
- uint8_t ep_type,
- uint16_t mps)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- __HAL_LOCK(hhcd);
-
- hhcd->hc[ch_num].dev_addr = dev_address;
- hhcd->hc[ch_num].max_packet = mps;
- hhcd->hc[ch_num].ch_num = ch_num;
- hhcd->hc[ch_num].ep_type = ep_type;
- hhcd->hc[ch_num].ep_num = epnum & 0x7F;
- hhcd->hc[ch_num].ep_is_in = ((epnum & 0x80) == 0x80);
- hhcd->hc[ch_num].speed = speed;
-
- status = USB_HC_Init(hhcd->Instance,
- ch_num,
- epnum,
- dev_address,
- speed,
- ep_type,
- mps);
- __HAL_UNLOCK(hhcd);
-
- return status;
-}
-
-/**
- * @brief Halt a host channel.
- * @param hhcd: HCD handle
- * @param ch_num: Channel number.
- * This parameter can be a value from 1 to 15
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd, uint8_t ch_num)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- __HAL_LOCK(hhcd);
- USB_HC_Halt(hhcd->Instance, ch_num);
- __HAL_UNLOCK(hhcd);
-
- return status;
-}
-
-/**
- * @brief DeInitialize the host driver.
- * @param hhcd: HCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HCD_DeInit(HCD_HandleTypeDef *hhcd)
-{
- /* Check the HCD handle allocation */
- if(hhcd == NULL)
- {
- return HAL_ERROR;
- }
-
- hhcd->State = HAL_HCD_STATE_BUSY;
-
- /* DeInit the low level hardware */
- HAL_HCD_MspDeInit(hhcd);
-
- __HAL_HCD_DISABLE(hhcd);
-
- hhcd->State = HAL_HCD_STATE_RESET;
-
- return HAL_OK;
-}
-
-/**
- * @brief Initialize the HCD MSP.
- * @param hhcd: HCD handle
- * @retval None
- */
-__weak void HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PCD_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitialize the HCD MSP.
- * @param hhcd: HCD handle
- * @retval None
- */
-__weak void HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PCD_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup HCD_Exported_Functions_Group2 Input and Output operation functions
- * @brief HCD IO operation functions
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
- [..] This subsection provides a set of functions allowing to manage the USB Host Data
- Transfer
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Submit a new URB for processing.
- * @param hhcd: HCD handle
- * @param ch_num: Channel number.
- * This parameter can be a value from 1 to 15
- * @param direction: Channel number.
- * This parameter can be one of these values:
- * 0 : Output / 1 : Input
- * @param ep_type: Endpoint Type.
- * This parameter can be one of these values:
- * EP_TYPE_CTRL: Control type/
- * EP_TYPE_ISOC: Isochronous type/
- * EP_TYPE_BULK: Bulk type/
- * EP_TYPE_INTR: Interrupt type/
- * @param token: Endpoint Type.
- * This parameter can be one of these values:
- * 0: HC_PID_SETUP / 1: HC_PID_DATA1
- * @param pbuff: pointer to URB data
- * @param length: Length of URB data
- * @param do_ping: activate do ping protocol (for high speed only).
- * This parameter can be one of these values:
- * 0 : do ping inactive / 1 : do ping active
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd,
- uint8_t ch_num,
- uint8_t direction,
- uint8_t ep_type,
- uint8_t token,
- uint8_t* pbuff,
- uint16_t length,
- uint8_t do_ping)
-{
- hhcd->hc[ch_num].ep_is_in = direction;
- hhcd->hc[ch_num].ep_type = ep_type;
-
- if(token == 0)
- {
- hhcd->hc[ch_num].data_pid = HC_PID_SETUP;
- }
- else
- {
- hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
- }
-
- /* Manage Data Toggle */
- switch(ep_type)
- {
- case EP_TYPE_CTRL:
- if((token == 1) && (direction == 0)) /*send data */
- {
- if ( length == 0 )
- { /* For Status OUT stage, Length==0, Status Out PID = 1 */
- hhcd->hc[ch_num].toggle_out = 1;
- }
-
- /* Set the Data Toggle bit as per the Flag */
- if ( hhcd->hc[ch_num].toggle_out == 0)
- { /* Put the PID 0 */
- hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
- }
- else
- { /* Put the PID 1 */
- hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
- }
- if(hhcd->hc[ch_num].urb_state != URB_NOTREADY)
- {
- hhcd->hc[ch_num].do_ping = do_ping;
- }
- }
- break;
-
- case EP_TYPE_BULK:
- if(direction == 0)
- {
- /* Set the Data Toggle bit as per the Flag */
- if ( hhcd->hc[ch_num].toggle_out == 0)
- { /* Put the PID 0 */
- hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
- }
- else
- { /* Put the PID 1 */
- hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
- }
- if(hhcd->hc[ch_num].urb_state != URB_NOTREADY)
- {
- hhcd->hc[ch_num].do_ping = do_ping;
- }
- }
- else
- {
- if( hhcd->hc[ch_num].toggle_in == 0)
- {
- hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
- }
- else
- {
- hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
- }
- }
-
- break;
- case EP_TYPE_INTR:
- if(direction == 0)
- {
- /* Set the Data Toggle bit as per the Flag */
- if ( hhcd->hc[ch_num].toggle_out == 0)
- { /* Put the PID 0 */
- hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
- }
- else
- { /* Put the PID 1 */
- hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
- }
- }
- else
- {
- if( hhcd->hc[ch_num].toggle_in == 0)
- {
- hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
- }
- else
- {
- hhcd->hc[ch_num].data_pid = HC_PID_DATA1;
- }
- }
- break;
-
- case EP_TYPE_ISOC:
- hhcd->hc[ch_num].data_pid = HC_PID_DATA0;
- break;
- }
-
- hhcd->hc[ch_num].xfer_buff = pbuff;
- hhcd->hc[ch_num].xfer_len = length;
- hhcd->hc[ch_num].urb_state = URB_IDLE;
- hhcd->hc[ch_num].xfer_count = 0;
- hhcd->hc[ch_num].ch_num = ch_num;
- hhcd->hc[ch_num].state = HC_IDLE;
-
- return USB_HC_StartXfer(hhcd->Instance, &(hhcd->hc[ch_num]), hhcd->Init.dma_enable);
-}
-
-/**
- * @brief Handle HCD interrupt request.
- * @param hhcd: HCD handle
- * @retval None
- */
-void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd)
-{
- USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
- uint32_t i = 0 , interrupt = 0;
-
- /* Ensure that we are in device mode */
- if (USB_GetMode(hhcd->Instance) == USB_OTG_MODE_HOST)
- {
- /* Avoid spurious interrupt */
- if(__HAL_HCD_IS_INVALID_INTERRUPT(hhcd))
- {
- return;
- }
-
- if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT))
- {
- /* Incorrect mode, acknowledge the interrupt */
- __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT);
- }
-
- if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_IISOIXFR))
- {
- /* Incorrect mode, acknowledge the interrupt */
- __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_IISOIXFR);
- }
-
- if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_PTXFE))
- {
- /* Incorrect mode, acknowledge the interrupt */
- __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_PTXFE);
- }
-
- if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_MMIS))
- {
- /* Incorrect mode, acknowledge the interrupt */
- __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_MMIS);
- }
-
- /* Handle Host Disconnect Interrupts */
- if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_DISCINT))
- {
-
- /* Cleanup HPRT */
- USBx_HPRT0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
- USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
-
- /* Handle Host Port Interrupts */
- HAL_HCD_Disconnect_Callback(hhcd);
- USB_InitFSLSPClkSel(hhcd->Instance ,HCFG_48_MHZ );
- __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_DISCINT);
- }
-
- /* Handle Host Port Interrupts */
- if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HPRTINT))
- {
- HCD_Port_IRQHandler (hhcd);
- }
-
- /* Handle Host SOF Interrupts */
- if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_SOF))
- {
- HAL_HCD_SOF_Callback(hhcd);
- __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_SOF);
- }
-
- /* Handle Host channel Interrupts */
- if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_HCINT))
- {
- interrupt = USB_HC_ReadInterrupt(hhcd->Instance);
- for (i = 0; i < hhcd->Init.Host_channels; i++)
- {
- if (interrupt & (1 << i))
- {
- if ((USBx_HC(i)->HCCHAR) & USB_OTG_HCCHAR_EPDIR)
- {
- HCD_HC_IN_IRQHandler(hhcd, i);
- }
- else
- {
- HCD_HC_OUT_IRQHandler (hhcd, i);
- }
- }
- }
- __HAL_HCD_CLEAR_FLAG(hhcd, USB_OTG_GINTSTS_HCINT);
- }
-
- /* Handle Rx Queue Level Interrupts */
- if(__HAL_HCD_GET_FLAG(hhcd, USB_OTG_GINTSTS_RXFLVL))
- {
- USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
-
- HCD_RXQLVL_IRQHandler (hhcd);
-
- USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_RXFLVL);
- }
- }
-}
-
-/**
- * @brief SOF callback.
- * @param hhcd: HCD handle
- * @retval None
- */
-__weak void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_HCD_SOF_Callback could be implemented in the user file
- */
-}
-
-/**
- * @brief Connection Event callback.
- * @param hhcd: HCD handle
- * @retval None
- */
-__weak void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_HCD_Connect_Callback could be implemented in the user file
- */
-}
-
-/**
- * @brief Disconnection Event callback.
- * @param hhcd: HCD handle
- * @retval None
- */
-__weak void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_HCD_Disconnect_Callback could be implemented in the user file
- */
-}
-
-/**
- * @brief Notify URB state change callback.
- * @param hhcd: HCD handle
- * @param chnum: Channel number.
- * This parameter can be a value from 1 to 15
- * @param urb_state:
- * This parameter can be one of these values:
- * URB_IDLE/
- * URB_DONE/
- * URB_NOTREADY/
- * URB_NYET/
- * URB_ERROR/
- * URB_STALL/
- * @retval None
- */
-__weak void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, uint8_t chnum, HCD_URBStateTypeDef urb_state)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_HCD_HC_NotifyURBChange_Callback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup HCD_Exported_Functions_Group3 Peripheral Control functions
- * @brief Management functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Control functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to control the HCD data
- transfers.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Start the host driver.
- * @param hhcd: HCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd)
-{
- __HAL_LOCK(hhcd);
- __HAL_HCD_ENABLE(hhcd);
- USB_DriveVbus(hhcd->Instance, 1);
- __HAL_UNLOCK(hhcd);
- return HAL_OK;
-}
-
-/**
- * @brief Stop the host driver.
- * @param hhcd: HCD handle
- * @retval HAL status
- */
-
-HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd)
-{
- __HAL_LOCK(hhcd);
- USB_StopHost(hhcd->Instance);
- __HAL_UNLOCK(hhcd);
- return HAL_OK;
-}
-
-/**
- * @brief Reset the host port.
- * @param hhcd: HCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd)
-{
- return (USB_ResetPort(hhcd->Instance));
-}
-
-/**
- * @}
- */
-
-/** @defgroup HCD_Exported_Functions_Group4 Peripheral State functions
- * @brief Peripheral State functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral State functions #####
- ===============================================================================
- [..]
- This subsection permits to get in run-time the status of the peripheral
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Return the HCD handle state.
- * @param hhcd: HCD handle
- * @retval HAL state
- */
-HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef *hhcd)
-{
- return hhcd->State;
-}
-
-/**
- * @brief Return URB state for a channel.
- * @param hhcd: HCD handle
- * @param chnum: Channel number.
- * This parameter can be a value from 1 to 15
- * @retval URB state.
- * This parameter can be one of these values:
- * URB_IDLE/
- * URB_DONE/
- * URB_NOTREADY/
- * URB_NYET/
- * URB_ERROR/
- * URB_STALL
- */
-HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum)
-{
- return hhcd->hc[chnum].urb_state;
-}
-
-
-/**
- * @brief Return the last host transfer size.
- * @param hhcd: HCD handle
- * @param chnum: Channel number.
- * This parameter can be a value from 1 to 15
- * @retval last transfer size in byte
- */
-uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum)
-{
- return hhcd->hc[chnum].xfer_count;
-}
-
-/**
- * @brief Return the Host Channel state.
- * @param hhcd: HCD handle
- * @param chnum: Channel number.
- * This parameter can be a value from 1 to 15
- * @retval Host channel state
- * This parameter can be one of these values:
- * HC_IDLE/
- * HC_XFRC/
- * HC_HALTED/
- * HC_NYET/
- * HC_NAK/
- * HC_STALL/
- * HC_XACTERR/
- * HC_BBLERR/
- * HC_DATATGLERR
- */
-HCD_HCStateTypeDef HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum)
-{
- return hhcd->hc[chnum].state;
-}
-
-/**
- * @brief Return the current Host frame number.
- * @param hhcd: HCD handle
- * @retval Current Host frame number
- */
-uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd)
-{
- return (USB_GetCurrentFrame(hhcd->Instance));
-}
-
-/**
- * @brief Return the Host enumeration speed.
- * @param hhcd: HCD handle
- * @retval Enumeration speed
- */
-uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd)
-{
- return (USB_GetHostSpeed(hhcd->Instance));
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @addtogroup HCD_Private_Functions
- * @{
- */
-/**
- * @brief Handle Host Channel IN interrupt requests.
- * @param hhcd: HCD handle
- * @param chnum: Channel number.
- * This parameter can be a value from 1 to 15
- * @retval None
- */
-static void HCD_HC_IN_IRQHandler(HCD_HandleTypeDef *hhcd, uint8_t chnum)
-{
- USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
- uint32_t tmpreg = 0;
-
- if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_AHBERR)
- {
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_AHBERR);
- __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
- }
- else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_ACK)
- {
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_ACK);
- }
-
- else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_STALL)
- {
- __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
- hhcd->hc[chnum].state = HC_STALL;
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_STALL);
- USB_HC_Halt(hhcd->Instance, chnum);
- }
- else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_DTERR)
- {
- __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
- USB_HC_Halt(hhcd->Instance, chnum);
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
- hhcd->hc[chnum].state = HC_DATATGLERR;
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_DTERR);
- }
-
- if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_FRMOR)
- {
- __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
- USB_HC_Halt(hhcd->Instance, chnum);
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_FRMOR);
- }
-
- else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_XFRC)
- {
-
- if (hhcd->Init.dma_enable)
- {
- hhcd->hc[chnum].xfer_count = hhcd->hc[chnum].xfer_len - \
- (USBx_HC(chnum)->HCTSIZ & USB_OTG_HCTSIZ_XFRSIZ);
- }
-
- hhcd->hc[chnum].state = HC_XFRC;
- hhcd->hc[chnum].ErrCnt = 0;
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_XFRC);
-
-
- if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL)||
- (hhcd->hc[chnum].ep_type == EP_TYPE_BULK))
- {
- __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
- USB_HC_Halt(hhcd->Instance, chnum);
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
-
- }
- else if(hhcd->hc[chnum].ep_type == EP_TYPE_INTR)
- {
- USBx_HC(chnum)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM;
- hhcd->hc[chnum].urb_state = URB_DONE;
- HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
- }
- hhcd->hc[chnum].toggle_in ^= 1;
-
- }
- else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_CHH)
- {
- __HAL_HCD_MASK_HALT_HC_INT(chnum);
-
- if(hhcd->hc[chnum].state == HC_XFRC)
- {
- hhcd->hc[chnum].urb_state = URB_DONE;
- }
-
- else if (hhcd->hc[chnum].state == HC_STALL)
- {
- hhcd->hc[chnum].urb_state = URB_STALL;
- }
-
- else if((hhcd->hc[chnum].state == HC_XACTERR) ||
- (hhcd->hc[chnum].state == HC_DATATGLERR))
- {
- if(hhcd->hc[chnum].ErrCnt++ > 3)
- {
- hhcd->hc[chnum].ErrCnt = 0;
- hhcd->hc[chnum].urb_state = URB_ERROR;
- }
- else
- {
- hhcd->hc[chnum].urb_state = URB_NOTREADY;
- }
-
- /* re-activate the channel */
- tmpreg = USBx_HC(chnum)->HCCHAR;
- tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
- tmpreg |= USB_OTG_HCCHAR_CHENA;
- USBx_HC(chnum)->HCCHAR = tmpreg;
- }
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_CHH);
- HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
- }
-
- else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_TXERR)
- {
- __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
- hhcd->hc[chnum].ErrCnt++;
- hhcd->hc[chnum].state = HC_XACTERR;
- USB_HC_Halt(hhcd->Instance, chnum);
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_TXERR);
- }
- else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_NAK)
- {
- if(hhcd->hc[chnum].ep_type == EP_TYPE_INTR)
- {
- __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
- USB_HC_Halt(hhcd->Instance, chnum);
- }
- else if ((hhcd->hc[chnum].ep_type == EP_TYPE_CTRL)||
- (hhcd->hc[chnum].ep_type == EP_TYPE_BULK))
- {
- /* re-activate the channel */
- tmpreg = USBx_HC(chnum)->HCCHAR;
- tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
- tmpreg |= USB_OTG_HCCHAR_CHENA;
- USBx_HC(chnum)->HCCHAR = tmpreg;
- }
- hhcd->hc[chnum].state = HC_NAK;
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
- }
-}
-
-/**
- * @brief Handle Host Channel OUT interrupt requests.
- * @param hhcd: HCD handle
- * @param chnum: Channel number.
- * This parameter can be a value from 1 to 15
- * @retval None
- */
-static void HCD_HC_OUT_IRQHandler (HCD_HandleTypeDef *hhcd, uint8_t chnum)
-{
- USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
- uint32_t tmpreg = 0;
-
- if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_AHBERR)
- {
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_AHBERR);
- __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
- }
- else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_ACK)
- {
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_ACK);
-
- if( hhcd->hc[chnum].do_ping == 1)
- {
- hhcd->hc[chnum].state = HC_NYET;
- __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
- USB_HC_Halt(hhcd->Instance, chnum);
- hhcd->hc[chnum].urb_state = URB_NOTREADY;
- }
- }
-
- else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_NYET)
- {
- hhcd->hc[chnum].state = HC_NYET;
- hhcd->hc[chnum].ErrCnt= 0;
- __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
- USB_HC_Halt(hhcd->Instance, chnum);
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NYET);
-
- }
-
- else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_FRMOR)
- {
- __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
- USB_HC_Halt(hhcd->Instance, chnum);
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_FRMOR);
- }
-
- else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_XFRC)
- {
- hhcd->hc[chnum].ErrCnt = 0;
- __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
- USB_HC_Halt(hhcd->Instance, chnum);
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_XFRC);
- hhcd->hc[chnum].state = HC_XFRC;
-
- }
-
- else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_STALL)
- {
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_STALL);
- __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
- USB_HC_Halt(hhcd->Instance, chnum);
- hhcd->hc[chnum].state = HC_STALL;
- }
-
- else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_NAK)
- {
- hhcd->hc[chnum].ErrCnt = 0;
- __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
- USB_HC_Halt(hhcd->Instance, chnum);
- hhcd->hc[chnum].state = HC_NAK;
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
- }
-
- else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_TXERR)
- {
- __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
- USB_HC_Halt(hhcd->Instance, chnum);
- hhcd->hc[chnum].state = HC_XACTERR;
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_TXERR);
- }
-
- else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_DTERR)
- {
- __HAL_HCD_UNMASK_HALT_HC_INT(chnum);
- USB_HC_Halt(hhcd->Instance, chnum);
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_NAK);
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_DTERR);
- hhcd->hc[chnum].state = HC_DATATGLERR;
- }
-
-
- else if ((USBx_HC(chnum)->HCINT) & USB_OTG_HCINT_CHH)
- {
- __HAL_HCD_MASK_HALT_HC_INT(chnum);
-
- if(hhcd->hc[chnum].state == HC_XFRC)
- {
- hhcd->hc[chnum].urb_state = URB_DONE;
- if (hhcd->hc[chnum].ep_type == EP_TYPE_BULK)
- {
- hhcd->hc[chnum].toggle_out ^= 1;
- }
- }
- else if (hhcd->hc[chnum].state == HC_NAK)
- {
- hhcd->hc[chnum].urb_state = URB_NOTREADY;
- }
-
- else if (hhcd->hc[chnum].state == HC_NYET)
- {
- hhcd->hc[chnum].urb_state = URB_NOTREADY;
- hhcd->hc[chnum].do_ping = 0;
- }
-
- else if (hhcd->hc[chnum].state == HC_STALL)
- {
- hhcd->hc[chnum].urb_state = URB_STALL;
- }
-
- else if((hhcd->hc[chnum].state == HC_XACTERR) ||
- (hhcd->hc[chnum].state == HC_DATATGLERR))
- {
- if(hhcd->hc[chnum].ErrCnt++ > 3)
- {
- hhcd->hc[chnum].ErrCnt = 0;
- hhcd->hc[chnum].urb_state = URB_ERROR;
- }
- else
- {
- hhcd->hc[chnum].urb_state = URB_NOTREADY;
- }
-
- /* re-activate the channel */
- tmpreg = USBx_HC(chnum)->HCCHAR;
- tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
- tmpreg |= USB_OTG_HCCHAR_CHENA;
- USBx_HC(chnum)->HCCHAR = tmpreg;
- }
-
- __HAL_HCD_CLEAR_HC_INT(chnum, USB_OTG_HCINT_CHH);
- HAL_HCD_HC_NotifyURBChange_Callback(hhcd, chnum, hhcd->hc[chnum].urb_state);
- }
-}
-
-/**
- * @brief Handle Rx Queue Level interrupt requests.
- * @param hhcd: HCD handle
- * @retval None
- */
-static void HCD_RXQLVL_IRQHandler(HCD_HandleTypeDef *hhcd)
-{
- USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
- uint8_t channelnum = 0;
- uint32_t pktsts;
- uint32_t pktcnt;
- uint32_t temp = 0;
- uint32_t tmpreg = 0;
-
- temp = hhcd->Instance->GRXSTSP;
- channelnum = temp & USB_OTG_GRXSTSP_EPNUM;
- pktsts = (temp & USB_OTG_GRXSTSP_PKTSTS) >> 17;
- pktcnt = (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
-
- switch (pktsts)
- {
- case GRXSTS_PKTSTS_IN:
- /* Read the data into the host buffer. */
- if ((pktcnt > 0) && (hhcd->hc[channelnum].xfer_buff != (void *)0))
- {
-
- USB_ReadPacket(hhcd->Instance, hhcd->hc[channelnum].xfer_buff, pktcnt);
-
- /*manage multiple Xfer */
- hhcd->hc[channelnum].xfer_buff += pktcnt;
- hhcd->hc[channelnum].xfer_count += pktcnt;
-
- if((USBx_HC(channelnum)->HCTSIZ & USB_OTG_HCTSIZ_PKTCNT) > 0)
- {
- /* re-activate the channel when more packets are expected */
- tmpreg = USBx_HC(channelnum)->HCCHAR;
- tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
- tmpreg |= USB_OTG_HCCHAR_CHENA;
- USBx_HC(channelnum)->HCCHAR = tmpreg;
- hhcd->hc[channelnum].toggle_in ^= 1;
- }
- }
- break;
-
- case GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
- break;
- case GRXSTS_PKTSTS_IN_XFER_COMP:
- case GRXSTS_PKTSTS_CH_HALTED:
- default:
- break;
- }
-}
-
-/**
- * @brief Handle Host Port interrupt requests.
- * @param hhcd: HCD handle
- * @retval None
- */
-static void HCD_Port_IRQHandler (HCD_HandleTypeDef *hhcd)
-{
- USB_OTG_GlobalTypeDef *USBx = hhcd->Instance;
- __IO uint32_t hprt0, hprt0_dup;
-
- /* Handle Host Port Interrupts */
- hprt0 = USBx_HPRT0;
- hprt0_dup = USBx_HPRT0;
-
- hprt0_dup &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
- USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
-
- /* Check whether Port Connect Detected */
- if((hprt0 & USB_OTG_HPRT_PCDET) == USB_OTG_HPRT_PCDET)
- {
- if((hprt0 & USB_OTG_HPRT_PCSTS) == USB_OTG_HPRT_PCSTS)
- {
- USB_MASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_DISCINT);
- HAL_HCD_Connect_Callback(hhcd);
- }
- hprt0_dup |= USB_OTG_HPRT_PCDET;
-
- }
-
- /* Check whether Port Enable Changed */
- if((hprt0 & USB_OTG_HPRT_PENCHNG) == USB_OTG_HPRT_PENCHNG)
- {
- hprt0_dup |= USB_OTG_HPRT_PENCHNG;
-
- if((hprt0 & USB_OTG_HPRT_PENA) == USB_OTG_HPRT_PENA)
- {
- if(hhcd->Init.phy_itface == USB_OTG_EMBEDDED_PHY)
- {
- if ((hprt0 & USB_OTG_HPRT_PSPD) == (HPRT0_PRTSPD_LOW_SPEED << 17))
- {
- USB_InitFSLSPClkSel(hhcd->Instance ,HCFG_6_MHZ );
- }
- else
- {
- USB_InitFSLSPClkSel(hhcd->Instance ,HCFG_48_MHZ );
- }
- }
- else
- {
- if(hhcd->Init.speed == HCD_SPEED_FULL)
- {
- USBx_HOST->HFIR = (uint32_t)60000;
- }
- }
- HAL_HCD_Connect_Callback(hhcd);
-
- if(hhcd->Init.speed == HCD_SPEED_HIGH)
- {
- USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_DISCINT);
- }
- }
- else
- {
- /* Cleanup HPRT */
- USBx_HPRT0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
- USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
-
- USB_UNMASK_INTERRUPT(hhcd->Instance, USB_OTG_GINTSTS_DISCINT);
- }
- }
-
- /* Check for an overcurrent */
- if((hprt0 & USB_OTG_HPRT_POCCHNG) == USB_OTG_HPRT_POCCHNG)
- {
- hprt0_dup |= USB_OTG_HPRT_POCCHNG;
- }
-
- /* Clear Port Interrupts */
- USBx_HPRT0 = hprt0_dup;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_HCD_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c
deleted file mode 100644
index f7ab5ed..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c.c
+++ /dev/null
@@ -1,3649 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_i2c.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief I2C HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Inter Integrated Circuit (I2C) peripheral:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral Control functions
- * + Peripheral State functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- The I2C HAL driver can be used as follows:
-
- (#) Declare a I2C_HandleTypeDef handle structure, for example:
- I2C_HandleTypeDef hi2c;
-
- (#)Initialize the I2C low level resources by implement the HAL_I2C_MspInit() API:
- (##) Enable the I2Cx interface clock
- (##) I2C pins configuration
- (+++) Enable the clock for the I2C GPIOs
- (+++) Configure I2C pins as alternate function open-drain
- (##) NVIC configuration if you need to use interrupt process
- (+++) Configure the I2Cx interrupt priority
- (+++) Enable the NVIC I2C IRQ Channel
- (##) DMA Configuration if you need to use DMA process
- (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive stream
- (+++) Enable the DMAx interface clock using
- (+++) Configure the DMA handle parameters
- (+++) Configure the DMA Tx or Rx Stream
- (+++) Associate the initialized DMA handle to the hi2c DMA Tx or Rx handle
- (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on
- the DMA Tx or Rx Stream
-
- (#) Configure the Communication Speed, Duty cycle, Addressing mode, Own Address1,
- Dual Addressing mode, Own Address2, General call and Nostretch mode in the hi2c Init structure.
-
- (#) Initialize the I2C registers by calling the HAL_I2C_Init(), configures also the low level Hardware
- (GPIO, CLOCK, NVIC...etc) by calling the customized HAL_I2C_MspInit(&hi2c) API.
-
- (#) To check if target device is ready for communication, use the function HAL_I2C_IsDeviceReady()
-
- (#) For I2C IO and IO MEM operations, three operation modes are available within this driver :
-
- *** Polling mode IO operation ***
- =================================
- [..]
- (+) Transmit in master mode an amount of data in blocking mode using HAL_I2C_Master_Transmit()
- (+) Receive in master mode an amount of data in blocking mode using HAL_I2C_Master_Receive()
- (+) Transmit in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Transmit()
- (+) Receive in slave mode an amount of data in blocking mode using HAL_I2C_Slave_Receive()
-
- *** Polling mode IO MEM operation ***
- =====================================
- [..]
- (+) Write an amount of data in blocking mode to a specific memory address using HAL_I2C_Mem_Write()
- (+) Read an amount of data in blocking mode from a specific memory address using HAL_I2C_Mem_Read()
-
-
- *** Interrupt mode IO operation ***
- ===================================
- [..]
- (+) Transmit in master mode an amount of data in non blocking mode using HAL_I2C_Master_Transmit_IT()
- (+) At transmission end of transfer HAL_I2C_MasterTxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback
- (+) Receive in master mode an amount of data in non blocking mode using HAL_I2C_Master_Receive_IT()
- (+) At reception end of transfer HAL_I2C_MasterRxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback
- (+) Transmit in slave mode an amount of data in non blocking mode using HAL_I2C_Slave_Transmit_IT()
- (+) At transmission end of transfer HAL_I2C_SlaveTxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback
- (+) Receive in slave mode an amount of data in non blocking mode using HAL_I2C_Slave_Receive_IT()
- (+) At reception end of transfer HAL_I2C_SlaveRxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback
- (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_I2C_ErrorCallback
-
- *** Interrupt mode IO MEM operation ***
- =======================================
- [..]
- (+) Write an amount of data in no-blocking mode with Interrupt to a specific memory address using
- HAL_I2C_Mem_Write_IT()
- (+) At MEM end of write transfer HAL_I2C_MemTxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback
- (+) Read an amount of data in no-blocking mode with Interrupt from a specific memory address using
- HAL_I2C_Mem_Read_IT()
- (+) At MEM end of read transfer HAL_I2C_MemRxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback
- (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_I2C_ErrorCallback
-
- *** DMA mode IO operation ***
- ==============================
- [..]
- (+) Transmit in master mode an amount of data in non blocking mode (DMA) using
- HAL_I2C_Master_Transmit_DMA()
- (+) At transmission end of transfer HAL_I2C_MasterTxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2C_MasterTxCpltCallback
- (+) Receive in master mode an amount of data in non blocking mode (DMA) using
- HAL_I2C_Master_Receive_DMA()
- (+) At reception end of transfer HAL_I2C_MasterRxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2C_MasterRxCpltCallback
- (+) Transmit in slave mode an amount of data in non blocking mode (DMA) using
- HAL_I2C_Slave_Transmit_DMA()
- (+) At transmission end of transfer HAL_I2C_SlaveTxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2C_SlaveTxCpltCallback
- (+) Receive in slave mode an amount of data in non blocking mode (DMA) using
- HAL_I2C_Slave_Receive_DMA()
- (+) At reception end of transfer HAL_I2C_SlaveRxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2C_SlaveRxCpltCallback
- (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_I2C_ErrorCallback
-
- *** DMA mode IO MEM operation ***
- =================================
- [..]
- (+) Write an amount of data in no-blocking mode with DMA to a specific memory address using
- HAL_I2C_Mem_Write_DMA()
- (+) At MEM end of write transfer HAL_I2C_MemTxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2C_MemTxCpltCallback
- (+) Read an amount of data in no-blocking mode with DMA from a specific memory address using
- HAL_I2C_Mem_Read_DMA()
- (+) At MEM end of read transfer HAL_I2C_MemRxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2C_MemRxCpltCallback
- (+) In case of transfer Error, HAL_I2C_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_I2C_ErrorCallback
-
-
- *** I2C HAL driver macros list ***
- ==================================
- [..]
- Below the list of most used macros in I2C HAL driver.
-
- (+) __HAL_I2C_ENABLE: Enable the I2C peripheral
- (+) __HAL_I2C_DISABLE: Disable the I2C peripheral
- (+) __HAL_I2C_GET_FLAG : Checks whether the specified I2C flag is set or not
- (+) __HAL_I2C_CLEAR_FLAG : Clear the specified I2C pending flag
- (+) __HAL_I2C_ENABLE_IT: Enable the specified I2C interrupt
- (+) __HAL_I2C_DISABLE_IT: Disable the specified I2C interrupt
-
- [..]
- (@) You can refer to the I2C HAL driver header file for more useful macros
-
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup I2C I2C
- * @brief I2C HAL module driver
- * @{
- */
-
-#ifdef HAL_I2C_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @addtogroup I2C_Private_Constants
- * @{
- */
-#define I2C_TIMEOUT_FLAG ((uint32_t)35) /* 35 ms */
-#define I2C_TIMEOUT_ADDR_SLAVE ((uint32_t)10000) /* 10 s */
-#define I2C_TIMEOUT_BUSY_FLAG ((uint32_t)10000) /* 10 s */
-/**
- * @}
- */
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @addtogroup I2C_Private_Functions
- * @{
- */
-static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma);
-static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma);
-static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma);
-static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma);
-static void I2C_DMAMemTransmitCplt(DMA_HandleTypeDef *hdma);
-static void I2C_DMAMemReceiveCplt(DMA_HandleTypeDef *hdma);
-static void I2C_DMAError(DMA_HandleTypeDef *hdma);
-
-static HAL_StatusTypeDef I2C_MasterRequestWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout);
-static HAL_StatusTypeDef I2C_MasterRequestRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout);
-static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout);
-static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout);
-static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
-static HAL_StatusTypeDef I2C_WaitOnMasterAddressFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, uint32_t Timeout);
-
-static HAL_StatusTypeDef I2C_MasterTransmit_TXE(I2C_HandleTypeDef *hi2c);
-static HAL_StatusTypeDef I2C_MasterTransmit_BTF(I2C_HandleTypeDef *hi2c);
-static HAL_StatusTypeDef I2C_MasterReceive_RXNE(I2C_HandleTypeDef *hi2c);
-static HAL_StatusTypeDef I2C_MasterReceive_BTF(I2C_HandleTypeDef *hi2c);
-
-static HAL_StatusTypeDef I2C_SlaveTransmit_TXE(I2C_HandleTypeDef *hi2c);
-static HAL_StatusTypeDef I2C_SlaveTransmit_BTF(I2C_HandleTypeDef *hi2c);
-static HAL_StatusTypeDef I2C_SlaveReceive_RXNE(I2C_HandleTypeDef *hi2c);
-static HAL_StatusTypeDef I2C_SlaveReceive_BTF(I2C_HandleTypeDef *hi2c);
-static HAL_StatusTypeDef I2C_Slave_ADDR(I2C_HandleTypeDef *hi2c);
-static HAL_StatusTypeDef I2C_Slave_STOPF(I2C_HandleTypeDef *hi2c);
-static HAL_StatusTypeDef I2C_Slave_AF(I2C_HandleTypeDef *hi2c);
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup I2C_Exported_Functions I2C Exported Functions
- * @{
- */
-
-/** @defgroup I2C_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..] This subsection provides a set of functions allowing to initialize and
- de-initialize the I2Cx peripheral:
-
- (+) User must Implement HAL_I2C_MspInit() function in which he configures
- all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC).
-
- (+) Call the function HAL_I2C_Init() to configure the selected device with
- the selected configuration:
- (++) Communication Speed
- (++) Duty cycle
- (++) Addressing mode
- (++) Own Address 1
- (++) Dual Addressing mode
- (++) Own Address 2
- (++) General call mode
- (++) Nostretch mode
-
- (+) Call the function HAL_I2C_DeInit() to restore the default configuration
- of the selected I2Cx peripheral.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the I2C according to the specified parameters
- * in the I2C_InitTypeDef and create the associated handle.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c)
-{
- uint32_t freqrange = 0;
- uint32_t pclk1 = 0;
-
- /* Check the I2C handle allocation */
- if(hi2c == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
- assert_param(IS_I2C_CLOCK_SPEED(hi2c->Init.ClockSpeed));
- assert_param(IS_I2C_DUTY_CYCLE(hi2c->Init.DutyCycle));
- assert_param(IS_I2C_OWN_ADDRESS1(hi2c->Init.OwnAddress1));
- assert_param(IS_I2C_ADDRESSING_MODE(hi2c->Init.AddressingMode));
- assert_param(IS_I2C_DUAL_ADDRESS(hi2c->Init.DualAddressMode));
- assert_param(IS_I2C_OWN_ADDRESS2(hi2c->Init.OwnAddress2));
- assert_param(IS_I2C_GENERAL_CALL(hi2c->Init.GeneralCallMode));
- assert_param(IS_I2C_NO_STRETCH(hi2c->Init.NoStretchMode));
-
- if(hi2c->State == HAL_I2C_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hi2c->Lock = HAL_UNLOCKED;
- /* Init the low level hardware : GPIO, CLOCK, NVIC */
- HAL_I2C_MspInit(hi2c);
- }
-
- hi2c->State = HAL_I2C_STATE_BUSY;
-
- /* Disable the selected I2C peripheral */
- __HAL_I2C_DISABLE(hi2c);
-
- /* Get PCLK1 frequency */
- pclk1 = HAL_RCC_GetPCLK1Freq();
-
- /* Calculate frequency range */
- freqrange = I2C_FREQRANGE(pclk1);
-
- /*---------------------------- I2Cx CR2 Configuration ----------------------*/
- /* Configure I2Cx: Frequency range */
- hi2c->Instance->CR2 = freqrange;
-
- /*---------------------------- I2Cx TRISE Configuration --------------------*/
- /* Configure I2Cx: Rise Time */
- hi2c->Instance->TRISE = I2C_RISE_TIME(freqrange, hi2c->Init.ClockSpeed);
-
- /*---------------------------- I2Cx CCR Configuration ----------------------*/
- /* Configure I2Cx: Speed */
- hi2c->Instance->CCR = I2C_SPEED(pclk1, hi2c->Init.ClockSpeed, hi2c->Init.DutyCycle);
-
- /*---------------------------- I2Cx CR1 Configuration ----------------------*/
- /* Configure I2Cx: Generalcall and NoStretch mode */
- hi2c->Instance->CR1 = (hi2c->Init.GeneralCallMode | hi2c->Init.NoStretchMode);
-
- /*---------------------------- I2Cx OAR1 Configuration ---------------------*/
- /* Configure I2Cx: Own Address1 and addressing mode */
- hi2c->Instance->OAR1 = (hi2c->Init.AddressingMode | hi2c->Init.OwnAddress1);
-
- /*---------------------------- I2Cx OAR2 Configuration ---------------------*/
- /* Configure I2Cx: Dual mode and Own Address2 */
- hi2c->Instance->OAR2 = (hi2c->Init.DualAddressMode | hi2c->Init.OwnAddress2);
-
- /* Enable the selected I2C peripheral */
- __HAL_I2C_ENABLE(hi2c);
-
- hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
- hi2c->State = HAL_I2C_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the I2C peripheral.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2C_DeInit(I2C_HandleTypeDef *hi2c)
-{
- /* Check the I2C handle allocation */
- if(hi2c == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
-
- hi2c->State = HAL_I2C_STATE_BUSY;
-
- /* Disable the I2C Peripheral Clock */
- __HAL_I2C_DISABLE(hi2c);
-
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
- HAL_I2C_MspDeInit(hi2c);
-
- hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
-
- hi2c->State = HAL_I2C_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hi2c);
-
- return HAL_OK;
-}
-
-/**
- * @brief I2C MSP Init.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval None
- */
- __weak void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_I2C_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief I2C MSP DeInit
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval None
- */
- __weak void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_I2C_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup I2C_Exported_Functions_Group2 IO operation functions
- * @brief Data transfers functions
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to manage the I2C data
- transfers.
-
- (#) There are two modes of transfer:
- (++) Blocking mode : The communication is performed in the polling mode.
- The status of all data processing is returned by the same function
- after finishing transfer.
- (++) No-Blocking mode : The communication is performed using Interrupts
- or DMA. These functions return the status of the transfer startup.
- The end of the data processing will be indicated through the
- dedicated I2C IRQ when using Interrupt mode or the DMA IRQ when
- using DMA mode.
-
- (#) Blocking mode functions are :
- (++) HAL_I2C_Master_Transmit()
- (++) HAL_I2C_Master_Receive()
- (++) HAL_I2C_Slave_Transmit()
- (++) HAL_I2C_Slave_Receive()
- (++) HAL_I2C_Mem_Write()
- (++) HAL_I2C_Mem_Read()
- (++) HAL_I2C_IsDeviceReady()
-
- (#) No-Blocking mode functions with Interrupt are :
- (++) HAL_I2C_Master_Transmit_IT()
- (++) HAL_I2C_Master_Receive_IT()
- (++) HAL_I2C_Slave_Transmit_IT()
- (++) HAL_I2C_Slave_Receive_IT()
- (++) HAL_I2C_Mem_Write_IT()
- (++) HAL_I2C_Mem_Read_IT()
-
- (#) No-Blocking mode functions with DMA are :
- (++) HAL_I2C_Master_Transmit_DMA()
- (++) HAL_I2C_Master_Receive_DMA()
- (++) HAL_I2C_Slave_Transmit_DMA()
- (++) HAL_I2C_Slave_Receive_DMA()
- (++) HAL_I2C_Mem_Write_DMA()
- (++) HAL_I2C_Mem_Read_DMA()
-
- (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
- (++) HAL_I2C_MemTxCpltCallback()
- (++) HAL_I2C_MemRxCpltCallback()
- (++) HAL_I2C_MasterTxCpltCallback()
- (++) HAL_I2C_MasterRxCpltCallback()
- (++) HAL_I2C_SlaveTxCpltCallback()
- (++) HAL_I2C_SlaveRxCpltCallback()
- (++) HAL_I2C_ErrorCallback()
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Transmits in master mode an amount of data in blocking mode.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param DevAddress: Target device address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- if(hi2c->State == HAL_I2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Wait until BUSY flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2c);
-
- /* Disable Pos */
- hi2c->Instance->CR1 &= ~I2C_CR1_POS;
-
- hi2c->State = HAL_I2C_STATE_BUSY_TX;
- hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
-
- /* Send Slave Address */
- if(I2C_MasterRequestWrite(hi2c, DevAddress, Timeout) != HAL_OK)
- {
- if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_ERROR;
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_TIMEOUT;
- }
- }
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-
- while(Size > 0)
- {
- /* Wait until TXE flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Write data to DR */
- hi2c->Instance->DR = (*pData++);
- Size--;
-
- if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0))
- {
- /* Write data to DR */
- hi2c->Instance->DR = (*pData++);
- Size--;
- }
- }
-
- /* Wait until TXE flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Generate Stop */
- hi2c->Instance->CR1 |= I2C_CR1_STOP;
-
- hi2c->State = HAL_I2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receives in master mode an amount of data in blocking mode.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param DevAddress: Target device address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- if(hi2c->State == HAL_I2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Wait until BUSY flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2c);
-
- /* Disable Pos */
- hi2c->Instance->CR1 &= ~I2C_CR1_POS;
-
- hi2c->State = HAL_I2C_STATE_BUSY_RX;
- hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
-
- /* Send Slave Address */
- if(I2C_MasterRequestRead(hi2c, DevAddress, Timeout) != HAL_OK)
- {
- if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_ERROR;
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_TIMEOUT;
- }
- }
-
- if(Size == 1)
- {
- /* Disable Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-
- /* Generate Stop */
- hi2c->Instance->CR1 |= I2C_CR1_STOP;
- }
- else if(Size == 2)
- {
- /* Disable Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
-
- /* Enable Pos */
- hi2c->Instance->CR1 |= I2C_CR1_POS;
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
- }
- else
- {
- /* Enable Acknowledge */
- hi2c->Instance->CR1 |= I2C_CR1_ACK;
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
- }
-
- while(Size > 0)
- {
- if(Size <= 3)
- {
- /* One byte */
- if(Size == 1)
- {
- /* Wait until RXNE flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Read data from DR */
- (*pData++) = hi2c->Instance->DR;
- Size--;
- }
- /* Two bytes */
- else if(Size == 2)
- {
- /* Wait until BTF flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Generate Stop */
- hi2c->Instance->CR1 |= I2C_CR1_STOP;
-
- /* Read data from DR */
- (*pData++) = hi2c->Instance->DR;
- Size--;
-
- /* Read data from DR */
- (*pData++) = hi2c->Instance->DR;
- Size--;
- }
- /* 3 Last bytes */
- else
- {
- /* Wait until BTF flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Disable Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
-
- /* Read data from DR */
- (*pData++) = hi2c->Instance->DR;
- Size--;
-
- /* Wait until BTF flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Generate Stop */
- hi2c->Instance->CR1 |= I2C_CR1_STOP;
-
- /* Read data from DR */
- (*pData++) = hi2c->Instance->DR;
- Size--;
-
- /* Read data from DR */
- (*pData++) = hi2c->Instance->DR;
- Size--;
- }
- }
- else
- {
- /* Wait until RXNE flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Read data from DR */
- (*pData++) = hi2c->Instance->DR;
- Size--;
-
- if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET)
- {
- /* Read data from DR */
- (*pData++) = hi2c->Instance->DR;
- Size--;
- }
- }
- }
-
- hi2c->State = HAL_I2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Transmits in slave mode an amount of data in blocking mode.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- if(hi2c->State == HAL_I2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Wait until BUSY flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2c);
-
- /* Disable Pos */
- hi2c->Instance->CR1 &= ~I2C_CR1_POS;
-
- hi2c->State = HAL_I2C_STATE_BUSY_TX;
- hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
-
- /* Enable Address Acknowledge */
- hi2c->Instance->CR1 |= I2C_CR1_ACK;
-
- /* Wait until ADDR flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-
- /* If 10bit addressing mode is selected */
- if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_10BIT)
- {
- /* Wait until ADDR flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
- }
-
- while(Size > 0)
- {
- /* Wait until TXE flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Write data to DR */
- hi2c->Instance->DR = (*pData++);
- Size--;
-
- if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0))
- {
- /* Write data to DR */
- hi2c->Instance->DR = (*pData++);
- Size--;
- }
- }
-
- /* Wait until AF flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Clear AF flag */
- __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
-
- /* Disable Address Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
-
- hi2c->State = HAL_I2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive in slave mode an amount of data in blocking mode
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- if(hi2c->State == HAL_I2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Wait until BUSY flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2c);
-
- /* Disable Pos */
- hi2c->Instance->CR1 &= ~I2C_CR1_POS;
-
- hi2c->State = HAL_I2C_STATE_BUSY_RX;
- hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
-
- /* Enable Address Acknowledge */
- hi2c->Instance->CR1 |= I2C_CR1_ACK;
-
- /* Wait until ADDR flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-
- while(Size > 0)
- {
- /* Wait until RXNE flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Read data from DR */
- (*pData++) = hi2c->Instance->DR;
- Size--;
-
- if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0))
- {
- /* Read data from DR */
- (*pData++) = hi2c->Instance->DR;
- Size--;
- }
- }
-
- /* Wait until STOP flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Clear STOP flag */
- __HAL_I2C_CLEAR_STOPFLAG(hi2c);
-
- /* Disable Address Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
-
- hi2c->State = HAL_I2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Transmit in master mode an amount of data in no-blocking mode with Interrupt
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param DevAddress: Target device address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
-{
- if(hi2c->State == HAL_I2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Wait until BUSY flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2c);
-
- /* Disable Pos */
- hi2c->Instance->CR1 &= ~I2C_CR1_POS;
-
- hi2c->State = HAL_I2C_STATE_BUSY_TX;
- hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
-
- hi2c->pBuffPtr = pData;
- hi2c->XferSize = Size;
- hi2c->XferCount = Size;
-
- /* Send Slave Address */
- if(I2C_MasterRequestWrite(hi2c, DevAddress, I2C_TIMEOUT_FLAG) != HAL_OK)
- {
- if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_ERROR;
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_TIMEOUT;
- }
- }
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- /* Note : The I2C interrupts must be enabled after unlocking current process
- to avoid the risk of I2C interrupt handle execution before current
- process unlock */
-
- /* Enable EVT, BUF and ERR interrupt */
- __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive in master mode an amount of data in no-blocking mode with Interrupt
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param DevAddress: Target device address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
-{
- if(hi2c->State == HAL_I2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Wait until BUSY flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2c);
-
- /* Disable Pos */
- hi2c->Instance->CR1 &= ~I2C_CR1_POS;
-
- hi2c->State = HAL_I2C_STATE_BUSY_RX;
- hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
-
- hi2c->pBuffPtr = pData;
- hi2c->XferSize = Size;
- hi2c->XferCount = Size;
-
- /* Send Slave Address */
- if(I2C_MasterRequestRead(hi2c, DevAddress, I2C_TIMEOUT_FLAG) != HAL_OK)
- {
- if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_ERROR;
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_TIMEOUT;
- }
- }
-
- if(hi2c->XferCount == 1)
- {
- /* Disable Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-
- /* Generate Stop */
- hi2c->Instance->CR1 |= I2C_CR1_STOP;
- }
- else if(hi2c->XferCount == 2)
- {
- /* Disable Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
-
- /* Enable Pos */
- hi2c->Instance->CR1 |= I2C_CR1_POS;
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
- }
- else
- {
- /* Enable Acknowledge */
- hi2c->Instance->CR1 |= I2C_CR1_ACK;
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- /* Note : The I2C interrupts must be enabled after unlocking current process
- to avoid the risk of I2C interrupt handle execution before current
- process unlock */
-
- /* Enable EVT, BUF and ERR interrupt */
- __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Transmit in slave mode an amount of data in no-blocking mode with Interrupt
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
-{
- if(hi2c->State == HAL_I2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Wait until BUSY flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2c);
-
- /* Disable Pos */
- hi2c->Instance->CR1 &= ~I2C_CR1_POS;
-
- hi2c->State = HAL_I2C_STATE_BUSY_TX;
- hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
-
- hi2c->pBuffPtr = pData;
- hi2c->XferSize = Size;
- hi2c->XferCount = Size;
-
- /* Enable Address Acknowledge */
- hi2c->Instance->CR1 |= I2C_CR1_ACK;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- /* Note : The I2C interrupts must be enabled after unlocking current process
- to avoid the risk of I2C interrupt handle execution before current
- process unlock */
-
- /* Enable EVT, BUF and ERR interrupt */
- __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive in slave mode an amount of data in no-blocking mode with Interrupt
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
-{
- if(hi2c->State == HAL_I2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Wait until BUSY flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2c);
-
- /* Disable Pos */
- hi2c->Instance->CR1 &= ~I2C_CR1_POS;
-
- hi2c->State = HAL_I2C_STATE_BUSY_RX;
- hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
-
- hi2c->pBuffPtr = pData;
- hi2c->XferSize = Size;
- hi2c->XferCount = Size;
-
- /* Enable Address Acknowledge */
- hi2c->Instance->CR1 |= I2C_CR1_ACK;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- /* Note : The I2C interrupts must be enabled after unlocking current process
- to avoid the risk of I2C interrupt handle execution before current
- process unlock */
-
- /* Enable EVT, BUF and ERR interrupt */
- __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Transmit in master mode an amount of data in no-blocking mode with DMA
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param DevAddress: Target device address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
-{
- if(hi2c->State == HAL_I2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Wait until BUSY flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2c);
-
- /* Disable Pos */
- hi2c->Instance->CR1 &= ~I2C_CR1_POS;
-
- hi2c->State = HAL_I2C_STATE_BUSY_TX;
- hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
-
- hi2c->pBuffPtr = pData;
- hi2c->XferSize = Size;
- hi2c->XferCount = Size;
-
- /* Set the I2C DMA transfer complete callback */
- hi2c->hdmatx->XferCpltCallback = I2C_DMAMasterTransmitCplt;
-
- /* Set the DMA error callback */
- hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->DR, Size);
-
- /* Send Slave Address */
- if(I2C_MasterRequestWrite(hi2c, DevAddress, I2C_TIMEOUT_FLAG) != HAL_OK)
- {
- if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_ERROR;
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_TIMEOUT;
- }
- }
-
- /* Enable DMA Request */
- hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive in master mode an amount of data in no-blocking mode with DMA
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param DevAddress: Target device address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size)
-{
- if(hi2c->State == HAL_I2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Wait until BUSY flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2c);
-
- /* Disable Pos */
- hi2c->Instance->CR1 &= ~I2C_CR1_POS;
-
- hi2c->State = HAL_I2C_STATE_BUSY_RX;
- hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
-
- hi2c->pBuffPtr = pData;
- hi2c->XferSize = Size;
- hi2c->XferCount = Size;
-
- /* Set the I2C DMA transfer complete callback */
- hi2c->hdmarx->XferCpltCallback = I2C_DMAMasterReceiveCplt;
-
- /* Set the DMA error callback */
- hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)pData, Size);
-
- /* Send Slave Address */
- if(I2C_MasterRequestRead(hi2c, DevAddress, I2C_TIMEOUT_FLAG) != HAL_OK)
- {
- if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_ERROR;
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_TIMEOUT;
- }
- }
-
- if(Size == 1)
- {
- /* Disable Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
- }
- else
- {
- /* Enable Last DMA bit */
- hi2c->Instance->CR2 |= I2C_CR2_LAST;
- }
-
- /* Enable DMA Request */
- hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Transmit in slave mode an amount of data in no-blocking mode with DMA
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
-{
- if(hi2c->State == HAL_I2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Wait until BUSY flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2c);
-
- /* Disable Pos */
- hi2c->Instance->CR1 &= ~I2C_CR1_POS;
-
- hi2c->State = HAL_I2C_STATE_BUSY_TX;
- hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
-
- hi2c->pBuffPtr = pData;
- hi2c->XferSize = Size;
- hi2c->XferCount = Size;
-
- /* Set the I2C DMA transfer complete callback */
- hi2c->hdmatx->XferCpltCallback = I2C_DMASlaveTransmitCplt;
-
- /* Set the DMA error callback */
- hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->DR, Size);
-
- /* Enable DMA Request */
- hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
-
- /* Enable Address Acknowledge */
- hi2c->Instance->CR1 |= I2C_CR1_ACK;
-
- /* Wait until ADDR flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, I2C_TIMEOUT_ADDR_SLAVE) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* If 7bit addressing mode is selected */
- if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
- {
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
- }
- else
- {
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-
- /* Wait until ADDR flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, I2C_TIMEOUT_ADDR_SLAVE) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive in slave mode an amount of data in no-blocking mode with DMA
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size)
-{
- if(hi2c->State == HAL_I2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Wait until BUSY flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2c);
-
- /* Disable Pos */
- hi2c->Instance->CR1 &= ~I2C_CR1_POS;
-
- hi2c->State = HAL_I2C_STATE_BUSY_RX;
- hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
-
- hi2c->pBuffPtr = pData;
- hi2c->XferSize = Size;
- hi2c->XferCount = Size;
-
- /* Set the I2C DMA transfer complete callback */
- hi2c->hdmarx->XferCpltCallback = I2C_DMASlaveReceiveCplt;
-
- /* Set the DMA error callback */
- hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)pData, Size);
-
- /* Enable DMA Request */
- hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
-
- /* Enable Address Acknowledge */
- hi2c->Instance->CR1 |= I2C_CR1_ACK;
-
- /* Wait until ADDR flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, RESET, I2C_TIMEOUT_ADDR_SLAVE) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-/**
- * @brief Write an amount of data in blocking mode to a specific memory address
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param DevAddress: Target device address
- * @param MemAddress: Internal memory address
- * @param MemAddSize: Size of internal memory address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- /* Check the parameters */
- assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
-
- if(hi2c->State == HAL_I2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Wait until BUSY flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2c);
-
- /* Disable Pos */
- hi2c->Instance->CR1 &= ~I2C_CR1_POS;
-
- hi2c->State = HAL_I2C_STATE_MEM_BUSY_TX;
- hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
-
- /* Send Slave Address and Memory Address */
- if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, Timeout) != HAL_OK)
- {
- if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_ERROR;
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_TIMEOUT;
- }
- }
-
- while(Size > 0)
- {
- /* Wait until TXE flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Write data to DR */
- hi2c->Instance->DR = (*pData++);
- Size--;
-
- if((__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET) && (Size != 0))
- {
- /* Write data to DR */
- hi2c->Instance->DR = (*pData++);
- Size--;
- }
- }
-
- /* Wait until TXE flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Generate Stop */
- hi2c->Instance->CR1 |= I2C_CR1_STOP;
-
- hi2c->State = HAL_I2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Read an amount of data in blocking mode from a specific memory address
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param DevAddress: Target device address
- * @param MemAddress: Internal memory address
- * @param MemAddSize: Size of internal memory address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- /* Check the parameters */
- assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
-
- if(hi2c->State == HAL_I2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Wait until BUSY flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2c);
-
- /* Disable Pos */
- hi2c->Instance->CR1 &= ~I2C_CR1_POS;
-
- hi2c->State = HAL_I2C_STATE_MEM_BUSY_RX;
- hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
-
- /* Send Slave Address and Memory Address */
- if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, Timeout) != HAL_OK)
- {
- if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_ERROR;
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_TIMEOUT;
- }
- }
-
- if(Size == 1)
- {
- /* Disable Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-
- /* Generate Stop */
- hi2c->Instance->CR1 |= I2C_CR1_STOP;
- }
- else if(Size == 2)
- {
- /* Disable Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
-
- /* Enable Pos */
- hi2c->Instance->CR1 |= I2C_CR1_POS;
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
- }
- else
- {
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
- }
-
- while(Size > 0)
- {
- if(Size <= 3)
- {
- /* One byte */
- if(Size== 1)
- {
- /* Wait until RXNE flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Read data from DR */
- (*pData++) = hi2c->Instance->DR;
- Size--;
- }
- /* Two bytes */
- else if(Size == 2)
- {
- /* Wait until BTF flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Generate Stop */
- hi2c->Instance->CR1 |= I2C_CR1_STOP;
-
- /* Read data from DR */
- (*pData++) = hi2c->Instance->DR;
- Size--;
-
- /* Read data from DR */
- (*pData++) = hi2c->Instance->DR;
- Size--;
- }
- /* 3 Last bytes */
- else
- {
- /* Wait until BTF flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Disable Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
-
- /* Read data from DR */
- (*pData++) = hi2c->Instance->DR;
- Size--;
-
- /* Wait until BTF flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Generate Stop */
- hi2c->Instance->CR1 |= I2C_CR1_STOP;
-
- /* Read data from DR */
- (*pData++) = hi2c->Instance->DR;
- Size--;
-
- /* Read data from DR */
- (*pData++) = hi2c->Instance->DR;
- Size--;
- }
- }
- else
- {
- /* Wait until RXNE flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Read data from DR */
- (*pData++) = hi2c->Instance->DR;
- Size--;
-
- if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF) == SET)
- {
- /* Read data from DR */
- (*pData++) = hi2c->Instance->DR;
- Size--;
- }
- }
- }
-
- hi2c->State = HAL_I2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-/**
- * @brief Write an amount of data in no-blocking mode with Interrupt to a specific memory address
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param DevAddress: Target device address
- * @param MemAddress: Internal memory address
- * @param MemAddSize: Size of internal memory address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
-{
- /* Check the parameters */
- assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
-
- if(hi2c->State == HAL_I2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Wait until BUSY flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2c);
-
- /* Disable Pos */
- hi2c->Instance->CR1 &= ~I2C_CR1_POS;
-
- hi2c->State = HAL_I2C_STATE_MEM_BUSY_TX;
- hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
-
- hi2c->pBuffPtr = pData;
- hi2c->XferSize = Size;
- hi2c->XferCount = Size;
-
- /* Send Slave Address and Memory Address */
- if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK)
- {
- if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_ERROR;
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_TIMEOUT;
- }
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- /* Note : The I2C interrupts must be enabled after unlocking current process
- to avoid the risk of I2C interrupt handle execution before current
- process unlock */
-
- /* Enable EVT, BUF and ERR interrupt */
- __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Read an amount of data in no-blocking mode with Interrupt from a specific memory address
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param DevAddress: Target device address
- * @param MemAddress: Internal memory address
- * @param MemAddSize: Size of internal memory address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
-{
- /* Check the parameters */
- assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
-
- if(hi2c->State == HAL_I2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Wait until BUSY flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2c);
-
- /* Disable Pos */
- hi2c->Instance->CR1 &= ~I2C_CR1_POS;
-
- hi2c->State = HAL_I2C_STATE_MEM_BUSY_RX;
- hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
-
- hi2c->pBuffPtr = pData;
- hi2c->XferSize = Size;
- hi2c->XferCount = Size;
-
- /* Send Slave Address and Memory Address */
- if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK)
- {
- if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_ERROR;
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_TIMEOUT;
- }
- }
-
- if(hi2c->XferCount == 1)
- {
- /* Disable Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-
- /* Generate Stop */
- hi2c->Instance->CR1 |= I2C_CR1_STOP;
- }
- else if(hi2c->XferCount == 2)
- {
- /* Disable Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
-
- /* Enable Pos */
- hi2c->Instance->CR1 |= I2C_CR1_POS;
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
- }
- else
- {
- /* Enable Acknowledge */
- hi2c->Instance->CR1 |= I2C_CR1_ACK;
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- /* Note : The I2C interrupts must be enabled after unlocking current process
- to avoid the risk of I2C interrupt handle execution before current
- process unlock */
-
- /* Enable EVT, BUF and ERR interrupt */
- __HAL_I2C_ENABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-/**
- * @brief Write an amount of data in no-blocking mode with DMA to a specific memory address
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param DevAddress: Target device address
- * @param MemAddress: Internal memory address
- * @param MemAddSize: Size of internal memory address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
-{
- /* Check the parameters */
- assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
-
- if(hi2c->State == HAL_I2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Wait until BUSY flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2c);
-
- /* Disable Pos */
- hi2c->Instance->CR1 &= ~I2C_CR1_POS;
-
- hi2c->State = HAL_I2C_STATE_MEM_BUSY_TX;
- hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
-
- hi2c->pBuffPtr = pData;
- hi2c->XferSize = Size;
- hi2c->XferCount = Size;
-
- /* Set the I2C DMA transfer complete callback */
- hi2c->hdmatx->XferCpltCallback = I2C_DMAMemTransmitCplt;
-
- /* Set the DMA error callback */
- hi2c->hdmatx->XferErrorCallback = I2C_DMAError;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(hi2c->hdmatx, (uint32_t)pData, (uint32_t)&hi2c->Instance->DR, Size);
-
- /* Send Slave Address and Memory Address */
- if(I2C_RequestMemoryWrite(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK)
- {
- if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_ERROR;
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_TIMEOUT;
- }
- }
-
- /* Enable DMA Request */
- hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Reads an amount of data in no-blocking mode with DMA from a specific memory address.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param DevAddress: Target device address
- * @param MemAddress: Internal memory address
- * @param MemAddSize: Size of internal memory address
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be read
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size)
-{
- /* Check the parameters */
- assert_param(IS_I2C_MEMADD_SIZE(MemAddSize));
-
- if(hi2c->State == HAL_I2C_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Wait until BUSY flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2c);
-
- /* Disable Pos */
- hi2c->Instance->CR1 &= ~I2C_CR1_POS;
-
- hi2c->State = HAL_I2C_STATE_MEM_BUSY_RX;
- hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
-
- hi2c->pBuffPtr = pData;
- hi2c->XferSize = Size;
- hi2c->XferCount = Size;
-
- /* Set the I2C DMA transfer complete callback */
- hi2c->hdmarx->XferCpltCallback = I2C_DMAMemReceiveCplt;
-
- /* Set the DMA error callback */
- hi2c->hdmarx->XferErrorCallback = I2C_DMAError;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(hi2c->hdmarx, (uint32_t)&hi2c->Instance->DR, (uint32_t)pData, Size);
-
- /* Send Slave Address and Memory Address */
- if(I2C_RequestMemoryRead(hi2c, DevAddress, MemAddress, MemAddSize, I2C_TIMEOUT_FLAG) != HAL_OK)
- {
- if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_ERROR;
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
- return HAL_TIMEOUT;
- }
- }
-
- if(Size == 1)
- {
- /* Disable Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
- }
- else
- {
- /* Enable Last DMA bit */
- hi2c->Instance->CR2 |= I2C_CR2_LAST;
- }
-
- /* Enable DMA Request */
- hi2c->Instance->CR2 |= I2C_CR2_DMAEN;
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Checks if target device is ready for communication.
- * @note This function is used with Memory devices
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param DevAddress: Target device address
- * @param Trials: Number of trials
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout)
-{
- uint32_t tickstart = 0, tmp1 = 0, tmp2 = 0, tmp3 = 0, I2C_Trials = 1;
-
- if(hi2c->State == HAL_I2C_STATE_READY)
- {
- /* Wait until BUSY flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
- {
- return HAL_BUSY;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2c);
-
- /* Disable Pos */
- hi2c->Instance->CR1 &= ~I2C_CR1_POS;
-
- hi2c->State = HAL_I2C_STATE_BUSY;
- hi2c->ErrorCode = HAL_I2C_ERROR_NONE;
-
- do
- {
- /* Generate Start */
- hi2c->Instance->CR1 |= I2C_CR1_START;
-
- /* Wait until SB flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Send slave address */
- hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress);
-
- /* Wait until ADDR or AF flag are set */
- /* Get tick */
- tickstart = HAL_GetTick();
-
- tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR);
- tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF);
- tmp3 = hi2c->State;
- while((tmp1 == RESET) && (tmp2 == RESET) && (tmp3 != HAL_I2C_STATE_TIMEOUT))
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- hi2c->State = HAL_I2C_STATE_TIMEOUT;
- }
- tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR);
- tmp2 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF);
- tmp3 = hi2c->State;
- }
-
- hi2c->State = HAL_I2C_STATE_READY;
-
- /* Check if the ADDR flag has been set */
- if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR) == SET)
- {
- /* Generate Stop */
- hi2c->Instance->CR1 |= I2C_CR1_STOP;
-
- /* Clear ADDR Flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-
- /* Wait until BUSY flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- hi2c->State = HAL_I2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- return HAL_OK;
- }
- else
- {
- /* Generate Stop */
- hi2c->Instance->CR1 |= I2C_CR1_STOP;
-
- /* Clear AF Flag */
- __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
-
- /* Wait until BUSY flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BUSY, SET, I2C_TIMEOUT_BUSY_FLAG) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- }
- }while(I2C_Trials++ < Trials);
-
- hi2c->State = HAL_I2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- return HAL_ERROR;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief This function handles I2C event interrupt request.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval HAL status
- */
-void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c)
-{
- uint32_t tmp1 = 0, tmp2 = 0, tmp3 = 0, tmp4 = 0;
- /* Master mode selected */
- if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_MSL) == SET)
- {
- /* I2C in mode Transmitter -----------------------------------------------*/
- if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TRA) == SET)
- {
- tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE);
- tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_BUF);
- tmp3 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF);
- tmp4 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_EVT);
- /* TXE set and BTF reset -----------------------------------------------*/
- if((tmp1 == SET) && (tmp2 == SET) && (tmp3 == RESET))
- {
- I2C_MasterTransmit_TXE(hi2c);
- }
- /* BTF set -------------------------------------------------------------*/
- else if((tmp3 == SET) && (tmp4 == SET))
- {
- I2C_MasterTransmit_BTF(hi2c);
- }
- }
- /* I2C in mode Receiver --------------------------------------------------*/
- else
- {
- tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE);
- tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_BUF);
- tmp3 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF);
- tmp4 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_EVT);
- /* RXNE set and BTF reset -----------------------------------------------*/
- if((tmp1 == SET) && (tmp2 == SET) && (tmp3 == RESET))
- {
- I2C_MasterReceive_RXNE(hi2c);
- }
- /* BTF set -------------------------------------------------------------*/
- else if((tmp3 == SET) && (tmp4 == SET))
- {
- I2C_MasterReceive_BTF(hi2c);
- }
- }
- }
- /* Slave mode selected */
- else
- {
- tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ADDR);
- tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, (I2C_IT_EVT));
- tmp3 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_STOPF);
- tmp4 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TRA);
- /* ADDR set --------------------------------------------------------------*/
- if((tmp1 == SET) && (tmp2 == SET))
- {
- I2C_Slave_ADDR(hi2c);
- }
- /* STOPF set --------------------------------------------------------------*/
- else if((tmp3 == SET) && (tmp2 == SET))
- {
- I2C_Slave_STOPF(hi2c);
- }
- /* I2C in mode Transmitter -----------------------------------------------*/
- else if(tmp4 == SET)
- {
- tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_TXE);
- tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_BUF);
- tmp3 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF);
- tmp4 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_EVT);
- /* TXE set and BTF reset -----------------------------------------------*/
- if((tmp1 == SET) && (tmp2 == SET) && (tmp3 == RESET))
- {
- I2C_SlaveTransmit_TXE(hi2c);
- }
- /* BTF set -------------------------------------------------------------*/
- else if((tmp3 == SET) && (tmp4 == SET))
- {
- I2C_SlaveTransmit_BTF(hi2c);
- }
- }
- /* I2C in mode Receiver --------------------------------------------------*/
- else
- {
- tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_RXNE);
- tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_BUF);
- tmp3 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BTF);
- tmp4 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_EVT);
- /* RXNE set and BTF reset ----------------------------------------------*/
- if((tmp1 == SET) && (tmp2 == SET) && (tmp3 == RESET))
- {
- I2C_SlaveReceive_RXNE(hi2c);
- }
- /* BTF set -------------------------------------------------------------*/
- else if((tmp3 == SET) && (tmp4 == SET))
- {
- I2C_SlaveReceive_BTF(hi2c);
- }
- }
- }
-}
-
-/**
- * @brief This function handles I2C error interrupt request.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval HAL status
- */
-void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c)
-{
- uint32_t tmp1 = 0, tmp2 = 0, tmp3 = 0;
-
- tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_BERR);
- tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERR);
- /* I2C Bus error interrupt occurred ----------------------------------------*/
- if((tmp1 == SET) && (tmp2 == SET))
- {
- hi2c->ErrorCode |= HAL_I2C_ERROR_BERR;
-
- /* Clear BERR flag */
- __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_BERR);
- }
-
- tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_ARLO);
- tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERR);
- /* I2C Arbitration Loss error interrupt occurred ---------------------------*/
- if((tmp1 == SET) && (tmp2 == SET))
- {
- hi2c->ErrorCode |= HAL_I2C_ERROR_ARLO;
-
- /* Clear ARLO flag */
- __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_ARLO);
- }
-
- tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF);
- tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERR);
- /* I2C Acknowledge failure error interrupt occurred ------------------------*/
- if((tmp1 == SET) && (tmp2 == SET))
- {
- tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_MSL);
- tmp2 = hi2c->XferCount;
- tmp3 = hi2c->State;
- if((tmp1 == RESET) && (tmp2 == 0) && (tmp3 == HAL_I2C_STATE_BUSY_TX))
- {
- I2C_Slave_AF(hi2c);
- }
- else
- {
- hi2c->ErrorCode |= HAL_I2C_ERROR_AF;
- /* Clear AF flag */
- __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
- }
- }
-
- tmp1 = __HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_OVR);
- tmp2 = __HAL_I2C_GET_IT_SOURCE(hi2c, I2C_IT_ERR);
- /* I2C Over-Run/Under-Run interrupt occurred -------------------------------*/
- if((tmp1 == SET) && (tmp2 == SET))
- {
- hi2c->ErrorCode |= HAL_I2C_ERROR_OVR;
- /* Clear OVR flag */
- __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_OVR);
- }
-
- if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
- {
- hi2c->State = HAL_I2C_STATE_READY;
-
- /* Disable Pos bit in I2C CR1 when error occurred in Master/Mem Receive IT Process */
- hi2c->Instance->CR1 &= ~I2C_CR1_POS;
-
- HAL_I2C_ErrorCallback(hi2c);
- }
-}
-
-/**
- * @brief Master Tx Transfer completed callbacks.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval None
- */
- __weak void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_I2C_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Master Rx Transfer completed callbacks.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval None
- */
-__weak void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_I2C_TxCpltCallback could be implemented in the user file
- */
-}
-
-/** @brief Slave Tx Transfer completed callbacks.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval None
- */
- __weak void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_I2C_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Slave Rx Transfer completed callbacks.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval None
- */
-__weak void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_I2C_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Memory Tx Transfer completed callbacks.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval None
- */
- __weak void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_I2C_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Memory Rx Transfer completed callbacks.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval None
- */
-__weak void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_I2C_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief I2C error callbacks.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval None
- */
- __weak void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_I2C_ErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup I2C_Exported_Functions_Group3 Peripheral State and Errors functions
- * @brief Peripheral State and Errors functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral State and Errors functions #####
- ===============================================================================
- [..]
- This subsection permits to get in run-time the status of the peripheral
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Returns the I2C state.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval HAL state
- */
-HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c)
-{
- return hi2c->State;
-}
-
-/**
- * @brief Return the I2C error code
- * @param hi2c : pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for the specified I2C.
-* @retval I2C Error Code
-*/
-uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c)
-{
- return hi2c->ErrorCode;
-}
-
-/**
- * @}
- */
-
-/**
- * @brief Handle TXE flag for Master
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval HAL status
- */
-static HAL_StatusTypeDef I2C_MasterTransmit_TXE(I2C_HandleTypeDef *hi2c)
-{
- /* Write data to DR */
- hi2c->Instance->DR = (*hi2c->pBuffPtr++);
- hi2c->XferCount--;
-
- if(hi2c->XferCount == 0)
- {
- /* Disable BUF interrupt */
- __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF);
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Handle BTF flag for Master transmitter
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval HAL status
- */
-static HAL_StatusTypeDef I2C_MasterTransmit_BTF(I2C_HandleTypeDef *hi2c)
-{
- if(hi2c->XferCount != 0)
- {
- /* Write data to DR */
- hi2c->Instance->DR = (*hi2c->pBuffPtr++);
- hi2c->XferCount--;
- }
- else
- {
- /* Disable EVT, BUF and ERR interrupt */
- __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
-
- /* Generate Stop */
- hi2c->Instance->CR1 |= I2C_CR1_STOP;
-
- if(hi2c->State == HAL_I2C_STATE_MEM_BUSY_TX)
- {
- hi2c->State = HAL_I2C_STATE_READY;
-
- HAL_I2C_MemTxCpltCallback(hi2c);
- }
- else
- {
- hi2c->State = HAL_I2C_STATE_READY;
-
- HAL_I2C_MasterTxCpltCallback(hi2c);
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief Handle RXNE flag for Master
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval HAL status
- */
-static HAL_StatusTypeDef I2C_MasterReceive_RXNE(I2C_HandleTypeDef *hi2c)
-{
- uint32_t tmp = 0;
-
- tmp = hi2c->XferCount;
- if(tmp > 3)
- {
- /* Read data from DR */
- (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
- hi2c->XferCount--;
- }
- else if((tmp == 2) || (tmp == 3))
- {
- /* Disable BUF interrupt */
- __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_BUF);
- }
- else
- {
- /* Disable EVT, BUF and ERR interrupt */
- __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
-
- /* Read data from DR */
- (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
- hi2c->XferCount--;
-
- if(hi2c->State == HAL_I2C_STATE_MEM_BUSY_RX)
- {
- hi2c->State = HAL_I2C_STATE_READY;
-
- HAL_I2C_MemRxCpltCallback(hi2c);
- }
- else
- {
- hi2c->State = HAL_I2C_STATE_READY;
-
- HAL_I2C_MasterRxCpltCallback(hi2c);
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief Handle BTF flag for Master receiver
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval HAL status
- */
-static HAL_StatusTypeDef I2C_MasterReceive_BTF(I2C_HandleTypeDef *hi2c)
-{
- if(hi2c->XferCount == 3)
- {
- /* Disable Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
-
- /* Read data from DR */
- (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
- hi2c->XferCount--;
- }
- else if(hi2c->XferCount == 2)
- {
- /* Generate Stop */
- hi2c->Instance->CR1 |= I2C_CR1_STOP;
-
- /* Read data from DR */
- (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
- hi2c->XferCount--;
-
- /* Read data from DR */
- (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
- hi2c->XferCount--;
-
- /* Disable EVT and ERR interrupt */
- __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_ERR);
-
- if(hi2c->State == HAL_I2C_STATE_MEM_BUSY_RX)
- {
- hi2c->State = HAL_I2C_STATE_READY;
-
- HAL_I2C_MemRxCpltCallback(hi2c);
- }
- else
- {
- hi2c->State = HAL_I2C_STATE_READY;
-
- HAL_I2C_MasterRxCpltCallback(hi2c);
- }
- }
- else
- {
- /* Read data from DR */
- (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
- hi2c->XferCount--;
- }
- return HAL_OK;
-}
-
-/**
- * @brief Handle TXE flag for Slave
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval HAL status
- */
-static HAL_StatusTypeDef I2C_SlaveTransmit_TXE(I2C_HandleTypeDef *hi2c)
-{
- if(hi2c->XferCount != 0)
- {
- /* Write data to DR */
- hi2c->Instance->DR = (*hi2c->pBuffPtr++);
- hi2c->XferCount--;
- }
- return HAL_OK;
-}
-
-/**
- * @brief Handle BTF flag for Slave transmitter
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval HAL status
- */
-static HAL_StatusTypeDef I2C_SlaveTransmit_BTF(I2C_HandleTypeDef *hi2c)
-{
- if(hi2c->XferCount != 0)
- {
- /* Write data to DR */
- hi2c->Instance->DR = (*hi2c->pBuffPtr++);
- hi2c->XferCount--;
- }
- return HAL_OK;
-}
-
-/**
- * @brief Handle RXNE flag for Slave
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval HAL status
- */
-static HAL_StatusTypeDef I2C_SlaveReceive_RXNE(I2C_HandleTypeDef *hi2c)
-{
- if(hi2c->XferCount != 0)
- {
- /* Read data from DR */
- (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
- hi2c->XferCount--;
- }
- return HAL_OK;
-}
-
-/**
- * @brief Handle BTF flag for Slave receiver
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval HAL status
- */
-static HAL_StatusTypeDef I2C_SlaveReceive_BTF(I2C_HandleTypeDef *hi2c)
-{
- if(hi2c->XferCount != 0)
- {
- /* Read data from DR */
- (*hi2c->pBuffPtr++) = hi2c->Instance->DR;
- hi2c->XferCount--;
- }
- return HAL_OK;
-}
-
-/**
- * @brief Handle ADD flag for Slave
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval HAL status
- */
-static HAL_StatusTypeDef I2C_Slave_ADDR(I2C_HandleTypeDef *hi2c)
-{
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-
- return HAL_OK;
-}
-
-/**
- * @brief Handle STOPF flag for Slave
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval HAL status
- */
-static HAL_StatusTypeDef I2C_Slave_STOPF(I2C_HandleTypeDef *hi2c)
-{
- /* Disable EVT, BUF and ERR interrupt */
- __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
-
- /* Clear STOPF flag */
- __HAL_I2C_CLEAR_STOPFLAG(hi2c);
-
- /* Disable Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
-
- hi2c->State = HAL_I2C_STATE_READY;
-
- HAL_I2C_SlaveRxCpltCallback(hi2c);
-
- return HAL_OK;
-}
-
-/**
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @retval HAL status
- */
-static HAL_StatusTypeDef I2C_Slave_AF(I2C_HandleTypeDef *hi2c)
-{
- /* Disable EVT, BUF and ERR interrupt */
- __HAL_I2C_DISABLE_IT(hi2c, I2C_IT_EVT | I2C_IT_BUF | I2C_IT_ERR);
-
- /* Clear AF flag */
- __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
-
- /* Disable Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
-
- hi2c->State = HAL_I2C_STATE_READY;
-
- HAL_I2C_SlaveTxCpltCallback(hi2c);
-
- return HAL_OK;
-}
-
-/**
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param DevAddress: Target device address
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-static HAL_StatusTypeDef I2C_MasterRequestWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout)
-{
- /* Generate Start */
- hi2c->Instance->CR1 |= I2C_CR1_START;
-
- /* Wait until SB flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
- {
- /* Send slave address */
- hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress);
- }
- else
- {
- /* Send header of slave address */
- hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(DevAddress);
-
- /* Wait until ADD10 flag is set */
- if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADD10, Timeout) != HAL_OK)
- {
- if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Send slave address */
- hi2c->Instance->DR = I2C_10BIT_ADDRESS(DevAddress);
- }
-
- /* Wait until ADDR flag is set */
- if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK)
- {
- if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Master sends target device address for read request.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param DevAddress: Target device address
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-static HAL_StatusTypeDef I2C_MasterRequestRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Timeout)
-{
- /* Enable Acknowledge */
- hi2c->Instance->CR1 |= I2C_CR1_ACK;
-
- /* Generate Start */
- hi2c->Instance->CR1 |= I2C_CR1_START;
-
- /* Wait until SB flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- if(hi2c->Init.AddressingMode == I2C_ADDRESSINGMODE_7BIT)
- {
- /* Send slave address */
- hi2c->Instance->DR = I2C_7BIT_ADD_READ(DevAddress);
- }
- else
- {
- /* Send header of slave address */
- hi2c->Instance->DR = I2C_10BIT_HEADER_WRITE(DevAddress);
-
- /* Wait until ADD10 flag is set */
- if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADD10, Timeout) != HAL_OK)
- {
- if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Send slave address */
- hi2c->Instance->DR = I2C_10BIT_ADDRESS(DevAddress);
-
- /* Wait until ADDR flag is set */
- if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK)
- {
- if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-
- /* Generate Restart */
- hi2c->Instance->CR1 |= I2C_CR1_START;
-
- /* Wait until SB flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Send header of slave address */
- hi2c->Instance->DR = I2C_10BIT_HEADER_READ(DevAddress);
- }
-
- /* Wait until ADDR flag is set */
- if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK)
- {
- if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Master sends target device address followed by internal memory address for write request.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param DevAddress: Target device address
- * @param MemAddress: Internal memory address
- * @param MemAddSize: Size of internal memory address
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-static HAL_StatusTypeDef I2C_RequestMemoryWrite(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout)
-{
- /* Generate Start */
- hi2c->Instance->CR1 |= I2C_CR1_START;
-
- /* Wait until SB flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Send slave address */
- hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress);
-
- /* Wait until ADDR flag is set */
- if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK)
- {
- if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-
- /* Wait until TXE flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* If Memory address size is 8Bit */
- if(MemAddSize == I2C_MEMADD_SIZE_8BIT)
- {
- /* Send Memory Address */
- hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress);
- }
- /* If Memory address size is 16Bit */
- else
- {
- /* Send MSB of Memory Address */
- hi2c->Instance->DR = I2C_MEM_ADD_MSB(MemAddress);
-
- /* Wait until TXE flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Send LSB of Memory Address */
- hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress);
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Master sends target device address followed by internal memory address for read request.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param DevAddress: Target device address
- * @param MemAddress: Internal memory address
- * @param MemAddSize: Size of internal memory address
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-static HAL_StatusTypeDef I2C_RequestMemoryRead(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint32_t Timeout)
-{
- /* Enable Acknowledge */
- hi2c->Instance->CR1 |= I2C_CR1_ACK;
-
- /* Generate Start */
- hi2c->Instance->CR1 |= I2C_CR1_START;
-
- /* Wait until SB flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Send slave address */
- hi2c->Instance->DR = I2C_7BIT_ADD_WRITE(DevAddress);
-
- /* Wait until ADDR flag is set */
- if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK)
- {
- if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Clear ADDR flag */
- __HAL_I2C_CLEAR_ADDRFLAG(hi2c);
-
- /* Wait until TXE flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* If Memory address size is 8Bit */
- if(MemAddSize == I2C_MEMADD_SIZE_8BIT)
- {
- /* Send Memory Address */
- hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress);
- }
- /* If Memory address size is 16Bit */
- else
- {
- /* Send MSB of Memory Address */
- hi2c->Instance->DR = I2C_MEM_ADD_MSB(MemAddress);
-
- /* Wait until TXE flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Send LSB of Memory Address */
- hi2c->Instance->DR = I2C_MEM_ADD_LSB(MemAddress);
- }
-
- /* Wait until TXE flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Generate Restart */
- hi2c->Instance->CR1 |= I2C_CR1_START;
-
- /* Wait until SB flag is set */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_SB, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Send slave address */
- hi2c->Instance->DR = I2C_7BIT_ADD_READ(DevAddress);
-
- /* Wait until ADDR flag is set */
- if(I2C_WaitOnMasterAddressFlagUntilTimeout(hi2c, I2C_FLAG_ADDR, Timeout) != HAL_OK)
- {
- if(hi2c->ErrorCode == HAL_I2C_ERROR_AF)
- {
- return HAL_ERROR;
- }
- else
- {
- return HAL_TIMEOUT;
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief DMA I2C master transmit process complete callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void I2C_DMAMasterTransmitCplt(DMA_HandleTypeDef *hdma)
-{
- I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- /* Wait until BTF flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, I2C_TIMEOUT_FLAG) != HAL_OK)
- {
- hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
- }
-
- /* Generate Stop */
- hi2c->Instance->CR1 |= I2C_CR1_STOP;
-
- /* Disable DMA Request */
- hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN;
-
- hi2c->XferCount = 0;
-
- hi2c->State = HAL_I2C_STATE_READY;
-
- /* Check if Errors has been detected during transfer */
- if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
- {
- HAL_I2C_ErrorCallback(hi2c);
- }
- else
- {
- HAL_I2C_MasterTxCpltCallback(hi2c);
- }
-}
-
-/**
- * @brief DMA I2C slave transmit process complete callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void I2C_DMASlaveTransmitCplt(DMA_HandleTypeDef *hdma)
-{
- I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- /* Wait until AF flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_AF, RESET, I2C_TIMEOUT_FLAG) != HAL_OK)
- {
- hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
- }
-
- /* Clear AF flag */
- __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
-
- /* Disable Address Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
-
- /* Disable DMA Request */
- hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN;
-
- hi2c->XferCount = 0;
-
- hi2c->State = HAL_I2C_STATE_READY;
-
- /* Check if Errors has been detected during transfer */
- if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
- {
- HAL_I2C_ErrorCallback(hi2c);
- }
- else
- {
- HAL_I2C_SlaveTxCpltCallback(hi2c);
- }
-}
-
-/**
- * @brief DMA I2C master receive process complete callback
- * @param hdma: DMA handle
- * @retval None
- */
-static void I2C_DMAMasterReceiveCplt(DMA_HandleTypeDef *hdma)
-{
- I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- /* Disable Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
-
- /* Generate Stop */
- hi2c->Instance->CR1 |= I2C_CR1_STOP;
-
- /* Disable Last DMA */
- hi2c->Instance->CR2 &= ~I2C_CR2_LAST;
-
- /* Disable DMA Request */
- hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN;
-
- hi2c->XferCount = 0;
-
- hi2c->State = HAL_I2C_STATE_READY;
-
- /* Check if Errors has been detected during transfer */
- if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
- {
- HAL_I2C_ErrorCallback(hi2c);
- }
- else
- {
- HAL_I2C_MasterRxCpltCallback(hi2c);
- }
-}
-
-/**
- * @brief DMA I2C slave receive process complete callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void I2C_DMASlaveReceiveCplt(DMA_HandleTypeDef *hdma)
-{
- I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- /* Wait until STOPF flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_STOPF, RESET, I2C_TIMEOUT_FLAG) != HAL_OK)
- {
- hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
- }
-
- /* Clear STOPF flag */
- __HAL_I2C_CLEAR_STOPFLAG(hi2c);
-
- /* Disable Address Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
-
- /* Disable DMA Request */
- hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN;
-
- hi2c->XferCount = 0;
-
- hi2c->State = HAL_I2C_STATE_READY;
-
- /* Check if Errors has been detected during transfer */
- if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
- {
- HAL_I2C_ErrorCallback(hi2c);
- }
- else
- {
- HAL_I2C_SlaveRxCpltCallback(hi2c);
- }
-}
-
-/**
- * @brief DMA I2C Memory Write process complete callback
- * @param hdma: DMA handle
- * @retval None
- */
-static void I2C_DMAMemTransmitCplt(DMA_HandleTypeDef *hdma)
-{
- I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- /* Wait until BTF flag is reset */
- if(I2C_WaitOnFlagUntilTimeout(hi2c, I2C_FLAG_BTF, RESET, I2C_TIMEOUT_FLAG) != HAL_OK)
- {
- hi2c->ErrorCode |= HAL_I2C_ERROR_TIMEOUT;
- }
-
- /* Generate Stop */
- hi2c->Instance->CR1 |= I2C_CR1_STOP;
-
- /* Disable DMA Request */
- hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN;
-
- hi2c->XferCount = 0;
-
- hi2c->State = HAL_I2C_STATE_READY;
-
- /* Check if Errors has been detected during transfer */
- if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
- {
- HAL_I2C_ErrorCallback(hi2c);
- }
- else
- {
- HAL_I2C_MemTxCpltCallback(hi2c);
- }
-}
-
-/**
- * @brief DMA I2C Memory Read process complete callback
- * @param hdma: DMA handle
- * @retval None
- */
-static void I2C_DMAMemReceiveCplt(DMA_HandleTypeDef *hdma)
-{
- I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- /* Disable Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
-
- /* Generate Stop */
- hi2c->Instance->CR1 |= I2C_CR1_STOP;
-
- /* Disable Last DMA */
- hi2c->Instance->CR2 &= ~I2C_CR2_LAST;
-
- /* Disable DMA Request */
- hi2c->Instance->CR2 &= ~I2C_CR2_DMAEN;
-
- hi2c->XferCount = 0;
-
- hi2c->State = HAL_I2C_STATE_READY;
-
- /* Check if Errors has been detected during transfer */
- if(hi2c->ErrorCode != HAL_I2C_ERROR_NONE)
- {
- HAL_I2C_ErrorCallback(hi2c);
- }
- else
- {
- HAL_I2C_MemRxCpltCallback(hi2c);
- }
-}
-
-/**
- * @brief DMA I2C communication error callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void I2C_DMAError(DMA_HandleTypeDef *hdma)
-{
- I2C_HandleTypeDef* hi2c = (I2C_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- /* Disable Acknowledge */
- hi2c->Instance->CR1 &= ~I2C_CR1_ACK;
-
- hi2c->XferCount = 0;
-
- hi2c->State = HAL_I2C_STATE_READY;
-
- hi2c->ErrorCode |= HAL_I2C_ERROR_DMA;
-
- HAL_I2C_ErrorCallback(hi2c);
-}
-
-/**
- * @brief This function handles I2C Communication Timeout.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param Flag: specifies the I2C flag to check.
- * @param Status: The new Flag status (SET or RESET).
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-static HAL_StatusTypeDef I2C_WaitOnFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait until flag is set */
- if(Status == RESET)
- {
- while(__HAL_I2C_GET_FLAG(hi2c, Flag) == RESET)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- hi2c->State= HAL_I2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- else
- {
- while(__HAL_I2C_GET_FLAG(hi2c, Flag) != RESET)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- hi2c->State= HAL_I2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief This function handles I2C Communication Timeout for Master addressing phase.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for I2C module
- * @param Flag: specifies the I2C flag to check.
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-static HAL_StatusTypeDef I2C_WaitOnMasterAddressFlagUntilTimeout(I2C_HandleTypeDef *hi2c, uint32_t Flag, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(__HAL_I2C_GET_FLAG(hi2c, Flag) == RESET)
- {
- if(__HAL_I2C_GET_FLAG(hi2c, I2C_FLAG_AF) == SET)
- {
- /* Generate Stop */
- hi2c->Instance->CR1 |= I2C_CR1_STOP;
-
- /* Clear AF Flag */
- __HAL_I2C_CLEAR_FLAG(hi2c, I2C_FLAG_AF);
-
- hi2c->ErrorCode = HAL_I2C_ERROR_AF;
- hi2c->State= HAL_I2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- return HAL_ERROR;
- }
-
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- hi2c->State= HAL_I2C_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2c);
-
- return HAL_TIMEOUT;
- }
- }
- }
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-#endif /* HAL_I2C_MODULE_ENABLED */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c
deleted file mode 100644
index f0427b4..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2c_ex.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_i2c_ex.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief I2C Extension HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of I2C extension peripheral:
- * + Extension features functions
- *
- @verbatim
- ==============================================================================
- ##### I2C peripheral extension features #####
- ==============================================================================
-
- [..] Comparing to other previous devices, the I2C interface for STM32F427xx/437xx/
- 429xx/439xx devices contains the following additional features :
-
- (+) Possibility to disable or enable Analog Noise Filter
- (+) Use of a configured Digital Noise Filter
-
- ##### How to use this driver #####
- ==============================================================================
- [..] This driver provides functions to configure Noise Filter
- (#) Configure I2C Analog noise filter using the function HAL_I2C_AnalogFilter_Config()
- (#) Configure I2C Digital noise filter using the function HAL_I2C_DigitalFilter_Config()
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup I2CEx I2CEx
- * @brief I2C HAL module driver
- * @{
- */
-
-#ifdef HAL_I2C_MODULE_ENABLED
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
- defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup I2CEx_Exported_Functions I2C Exported Functions
- * @{
- */
-
-
-/** @defgroup I2CEx_Exported_Functions_Group1 Extension features functions
- * @brief Extension features functions
- *
-@verbatim
- ===============================================================================
- ##### Extension features functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Configure Noise Filters
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Configures I2C Analog noise filter.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for the specified I2Cx peripheral.
- * @param AnalogFilter: new state of the Analog filter.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter)
-{
- uint32_t tmp = 0;
-
- /* Check the parameters */
- assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
- assert_param(IS_I2C_ANALOG_FILTER(AnalogFilter));
-
- tmp = hi2c->State;
- if((tmp == HAL_I2C_STATE_BUSY) || (tmp == HAL_I2C_STATE_BUSY_TX) || (tmp == HAL_I2C_STATE_BUSY_RX))
- {
- return HAL_BUSY;
- }
-
- hi2c->State = HAL_I2C_STATE_BUSY;
-
- /* Disable the selected I2C peripheral */
- __HAL_I2C_DISABLE(hi2c);
-
- /* Reset I2Cx ANOFF bit */
- hi2c->Instance->FLTR &= ~(I2C_FLTR_ANOFF);
-
- /* Disable the analog filter */
- hi2c->Instance->FLTR |= AnalogFilter;
-
- __HAL_I2C_ENABLE(hi2c);
-
- hi2c->State = HAL_I2C_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Configures I2C Digital noise filter.
- * @param hi2c: pointer to a I2C_HandleTypeDef structure that contains
- * the configuration information for the specified I2Cx peripheral.
- * @param DigitalFilter: Coefficient of digital noise filter between 0x00 and 0x0F.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter)
-{
- uint16_t tmpreg = 0;
- uint32_t tmp = 0;
-
- /* Check the parameters */
- assert_param(IS_I2C_ALL_INSTANCE(hi2c->Instance));
- assert_param(IS_I2C_DIGITAL_FILTER(DigitalFilter));
-
- tmp = hi2c->State;
- if((tmp == HAL_I2C_STATE_BUSY) || (tmp == HAL_I2C_STATE_BUSY_TX) || (tmp == HAL_I2C_STATE_BUSY_RX))
- {
- return HAL_BUSY;
- }
-
- hi2c->State = HAL_I2C_STATE_BUSY;
-
- /* Disable the selected I2C peripheral */
- __HAL_I2C_DISABLE(hi2c);
-
- /* Get the old register value */
- tmpreg = hi2c->Instance->FLTR;
-
- /* Reset I2Cx DNF bit [3:0] */
- tmpreg &= ~(I2C_FLTR_DNF);
-
- /* Set I2Cx DNF coefficient */
- tmpreg |= DigitalFilter;
-
- /* Store the new register value */
- hi2c->Instance->FLTR = tmpreg;
-
- __HAL_I2C_ENABLE(hi2c);
-
- hi2c->State = HAL_I2C_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-#endif /* STM32F427xx || STM32F429xx || STM32F437xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F446xx */
-
-#endif /* HAL_I2C_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c
deleted file mode 100644
index 63e4288..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s.c
+++ /dev/null
@@ -1,1408 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_i2s.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief I2S HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Integrated Interchip Sound (I2S) peripheral:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral State and Errors functions
- @verbatim
- ===============================================================================
- ##### How to use this driver #####
- ===============================================================================
- [..]
- The I2S HAL driver can be used as follow:
-
- (#) Declare a I2S_HandleTypeDef handle structure.
- (#) Initialize the I2S low level resources by implement the HAL_I2S_MspInit() API:
- (##) Enable the SPIx interface clock.
- (##) I2S pins configuration:
- (+++) Enable the clock for the I2S GPIOs.
- (+++) Configure these I2S pins as alternate function pull-up.
- (##) NVIC configuration if you need to use interrupt process (HAL_I2S_Transmit_IT()
- and HAL_I2S_Receive_IT() APIs).
- (+++) Configure the I2Sx interrupt priority.
- (+++) Enable the NVIC I2S IRQ handle.
- (##) DMA Configuration if you need to use DMA process (HAL_I2S_Transmit_DMA()
- and HAL_I2S_Receive_DMA() APIs:
- (+++) Declare a DMA handle structure for the Tx/Rx stream.
- (+++) Enable the DMAx interface clock.
- (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
- (+++) Configure the DMA Tx/Rx Stream.
- (+++) Associate the initialized DMA handle to the I2S DMA Tx/Rx handle.
- (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the
- DMA Tx/Rx Stream.
-
- (#) Program the Mode, Standard, Data Format, MCLK Output, Audio frequency and Polarity
- using HAL_I2S_Init() function.
-
- -@- The specific I2S interrupts (Transmission complete interrupt,
- RXNE interrupt and Error Interrupts) will be managed using the macros
- __I2S_ENABLE_IT() and __I2S_DISABLE_IT() inside the transmit and receive process.
- -@- Make sure that either:
- (+@) I2S PLL is configured or
- (+@) External clock source is configured after setting correctly
- the define constant EXTERNAL_CLOCK_VALUE in the stm32f4xx_hal_conf.h file.
-
- (#) Three operation modes are available within this driver :
-
- *** Polling mode IO operation ***
- =================================
- [..]
- (+) Send an amount of data in blocking mode using HAL_I2S_Transmit()
- (+) Receive an amount of data in blocking mode using HAL_I2S_Receive()
-
- *** Interrupt mode IO operation ***
- ===================================
- [..]
- (+) Send an amount of data in non blocking mode using HAL_I2S_Transmit_IT()
- (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback
- (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2S_TxCpltCallback
- (+) Receive an amount of data in non blocking mode using HAL_I2S_Receive_IT()
- (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback
- (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2S_RxCpltCallback
- (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_I2S_ErrorCallback
-
- *** DMA mode IO operation ***
- ==============================
- [..]
- (+) Send an amount of data in non blocking mode (DMA) using HAL_I2S_Transmit_DMA()
- (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback
- (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2S_TxCpltCallback
- (+) Receive an amount of data in non blocking mode (DMA) using HAL_I2S_Receive_DMA()
- (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback
- (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2S_RxCpltCallback
- (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_I2S_ErrorCallback
- (+) Pause the DMA Transfer using HAL_I2S_DMAPause()
- (+) Resume the DMA Transfer using HAL_I2S_DMAResume()
- (+) Stop the DMA Transfer using HAL_I2S_DMAStop()
-
- *** I2S HAL driver macros list ***
- =============================================
- [..]
- Below the list of most used macros in USART HAL driver.
-
- (+) __HAL_I2S_ENABLE: Enable the specified SPI peripheral (in I2S mode)
- (+) __HAL_I2S_DISABLE: Disable the specified SPI peripheral (in I2S mode)
- (+) __HAL_I2S_ENABLE_IT : Enable the specified I2S interrupts
- (+) __HAL_I2S_DISABLE_IT : Disable the specified I2S interrupts
- (+) __HAL_I2S_GET_FLAG: Check whether the specified I2S flag is set or not
-
- [..]
- (@) You can refer to the I2S HAL driver header file for more useful macros
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup I2S I2S
- * @brief I2S HAL module driver
- * @{
- */
-
-#ifdef HAL_I2S_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @addtogroup I2S_Private_Functions
- * @{
- */
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup I2S_Exported_Functions I2S Exported Functions
- * @{
- */
-
-/** @defgroup I2S_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..] This subsection provides a set of functions allowing to initialize and
- de-initialize the I2Sx peripheral in simplex mode:
-
- (+) User must Implement HAL_I2S_MspInit() function in which he configures
- all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
-
- (+) Call the function HAL_I2S_Init() to configure the selected device with
- the selected configuration:
- (++) Mode
- (++) Standard
- (++) Data Format
- (++) MCLK Output
- (++) Audio frequency
- (++) Polarity
-
- (+) Call the function HAL_I2S_DeInit() to restore the default configuration
- of the selected I2Sx peripheral.
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the I2S according to the specified parameters
- * in the I2S_InitTypeDef and create the associated handle.
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval HAL status
- */
-__weak HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s)
-{
- uint32_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1;
- uint32_t tmp = 0, i2sclk = 0;
-
- /* Check the I2S handle allocation */
- if(hi2s == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the I2S parameters */
- assert_param(IS_I2S_ALL_INSTANCE(hi2s->Instance));
- assert_param(IS_I2S_MODE(hi2s->Init.Mode));
- assert_param(IS_I2S_STANDARD(hi2s->Init.Standard));
- assert_param(IS_I2S_DATA_FORMAT(hi2s->Init.DataFormat));
- assert_param(IS_I2S_MCLK_OUTPUT(hi2s->Init.MCLKOutput));
- assert_param(IS_I2S_AUDIO_FREQ(hi2s->Init.AudioFreq));
- assert_param(IS_I2S_CPOL(hi2s->Init.CPOL));
- assert_param(IS_I2S_CLOCKSOURCE(hi2s->Init.ClockSource));
-
- if(hi2s->State == HAL_I2S_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hi2s->Lock = HAL_UNLOCKED;
- /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
- HAL_I2S_MspInit(hi2s);
- }
-
- hi2s->State = HAL_I2S_STATE_BUSY;
-
- /*----------------------- SPIx I2SCFGR & I2SPR Configuration ---------------*/
- /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */
- hi2s->Instance->I2SCFGR &= ~(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \
- SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \
- SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD);
- hi2s->Instance->I2SPR = 0x0002;
-
- /* Get the I2SCFGR register value */
- tmpreg = hi2s->Instance->I2SCFGR;
-
- /* If the default frequency value has to be written, reinitialize i2sdiv and i2sodd */
- /* If the requested audio frequency is not the default, compute the prescaler */
- if(hi2s->Init.AudioFreq != I2S_AUDIOFREQ_DEFAULT)
- {
- /* Check the frame length (For the Prescaler computing) *******************/
- if(hi2s->Init.DataFormat != I2S_DATAFORMAT_16B)
- {
- /* Packet length is 32 bits */
- packetlength = 2;
- }
-
- /* Get I2S source Clock frequency ****************************************/
- /* If an external I2S clock has to be used, the specific define should be set
- in the project configuration or in the stm32f4xx_conf.h file */
- i2sclk = I2S_GetInputClock(hi2s);
-
- /* Compute the Real divider depending on the MCLK output state, with a floating point */
- if(hi2s->Init.MCLKOutput == I2S_MCLKOUTPUT_ENABLE)
- {
- /* MCLK output is enabled */
- tmp = (uint32_t)(((((i2sclk / 256) * 10) / hi2s->Init.AudioFreq)) + 5);
- }
- else
- {
- /* MCLK output is disabled */
- tmp = (uint32_t)(((((i2sclk / (32 * packetlength)) *10 ) / hi2s->Init.AudioFreq)) + 5);
- }
-
- /* Remove the flatting point */
- tmp = tmp / 10;
-
- /* Check the parity of the divider */
- i2sodd = (uint32_t)(tmp & (uint32_t)1);
-
- /* Compute the i2sdiv prescaler */
- i2sdiv = (uint32_t)((tmp - i2sodd) / 2);
-
- /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */
- i2sodd = (uint32_t) (i2sodd << 8);
- }
-
- /* Test if the divider is 1 or 0 or greater than 0xFF */
- if((i2sdiv < 2) || (i2sdiv > 0xFF))
- {
- /* Set the default values */
- i2sdiv = 2;
- i2sodd = 0;
- }
-
- /* Write to SPIx I2SPR register the computed value */
- hi2s->Instance->I2SPR = (uint32_t)((uint32_t)i2sdiv | (uint32_t)(i2sodd | (uint32_t)hi2s->Init.MCLKOutput));
-
- /* Configure the I2S with the I2S_InitStruct values */
- tmpreg |= (uint32_t)(SPI_I2SCFGR_I2SMOD | hi2s->Init.Mode | hi2s->Init.Standard | hi2s->Init.DataFormat | hi2s->Init.CPOL);
-
-#if defined(SPI_I2SCFGR_ASTRTEN)
- if (hi2s->Init.Standard == I2S_STANDARD_PCM_SHORT)
- {
- /* Write to SPIx I2SCFGR */
- hi2s->Instance->I2SCFGR = tmpreg | SPI_I2SCFGR_ASTRTEN;
- }
- else
- {
- /* Write to SPIx I2SCFGR */
- hi2s->Instance->I2SCFGR = tmpreg;
- }
-#else
- /* Write to SPIx I2SCFGR */
- hi2s->Instance->I2SCFGR = tmpreg;
-#endif
-
- hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
- hi2s->State= HAL_I2S_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the I2S peripheral
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2S_DeInit(I2S_HandleTypeDef *hi2s)
-{
- /* Check the I2S handle allocation */
- if(hi2s == NULL)
- {
- return HAL_ERROR;
- }
-
- hi2s->State = HAL_I2S_STATE_BUSY;
-
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
- HAL_I2S_MspDeInit(hi2s);
-
- hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
- hi2s->State = HAL_I2S_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hi2s);
-
- return HAL_OK;
-}
-
-/**
- * @brief I2S MSP Init
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval None
- */
- __weak void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_I2S_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief I2S MSP DeInit
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval None
- */
- __weak void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_I2S_MspDeInit could be implemented in the user file
- */
-}
-/**
- * @}
- */
-
-/** @defgroup I2S_Exported_Functions_Group2 IO operation functions
- * @brief Data transfers functions
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to manage the I2S data
- transfers.
-
- (#) There are two modes of transfer:
- (++) Blocking mode : The communication is performed in the polling mode.
- The status of all data processing is returned by the same function
- after finishing transfer.
- (++) No-Blocking mode : The communication is performed using Interrupts
- or DMA. These functions return the status of the transfer startup.
- The end of the data processing will be indicated through the
- dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when
- using DMA mode.
-
- (#) Blocking mode functions are :
- (++) HAL_I2S_Transmit()
- (++) HAL_I2S_Receive()
-
- (#) No-Blocking mode functions with Interrupt are :
- (++) HAL_I2S_Transmit_IT()
- (++) HAL_I2S_Receive_IT()
-
- (#) No-Blocking mode functions with DMA are :
- (++) HAL_I2S_Transmit_DMA()
- (++) HAL_I2S_Receive_DMA()
-
- (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
- (++) HAL_I2S_TxCpltCallback()
- (++) HAL_I2S_RxCpltCallback()
- (++) HAL_I2S_ErrorCallback()
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Transmit an amount of data in blocking mode
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @param pData: a 16-bit pointer to data buffer.
- * @param Size: number of data sample to be sent:
- * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
- * configuration phase, the Size parameter means the number of 16-bit data length
- * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
- * the Size parameter means the number of 16-bit data length.
- * @param Timeout: Timeout duration
- * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
- * between Master and Slave(example: audio streaming).
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout)
-{
- uint32_t tmp1 = 0, tmp2 = 0;
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(hi2s->State == HAL_I2S_STATE_READY)
- {
- tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
- tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
- if((tmp1 == I2S_DATAFORMAT_24B)|| \
- (tmp2 == I2S_DATAFORMAT_32B))
- {
- hi2s->TxXferSize = Size*2;
- hi2s->TxXferCount = Size*2;
- }
- else
- {
- hi2s->TxXferSize = Size;
- hi2s->TxXferCount = Size;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2s);
-
- hi2s->State = HAL_I2S_STATE_BUSY_TX;
-
- /* Check if the I2S is already enabled */
- if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
- {
- /* Enable I2S peripheral */
- __HAL_I2S_ENABLE(hi2s);
- }
-
- while(hi2s->TxXferCount > 0)
- {
- hi2s->Instance->DR = (*pData++);
- hi2s->TxXferCount--;
- /* Wait until TXE flag is set */
- if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- }
- /* Check if Slave mode is selected */
- if(((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_TX) || ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_SLAVE_RX))
- {
- /* Wait until Busy flag is reset */
- if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_BSY, SET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- }
- hi2s->State = HAL_I2S_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive an amount of data in blocking mode
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @param pData: a 16-bit pointer to data buffer.
- * @param Size: number of data sample to be sent:
- * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
- * configuration phase, the Size parameter means the number of 16-bit data length
- * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
- * the Size parameter means the number of 16-bit data length.
- * @param Timeout: Timeout duration
- * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
- * between Master and Slave(example: audio streaming).
- * @note In I2S Master Receiver mode, just after enabling the peripheral the clock will be generate
- * in continuous way and as the I2S is not disabled at the end of the I2S transaction.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout)
-{
- uint32_t tmp1 = 0, tmp2 = 0;
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(hi2s->State == HAL_I2S_STATE_READY)
- {
- tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
- tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
- if((tmp1 == I2S_DATAFORMAT_24B)|| \
- (tmp2 == I2S_DATAFORMAT_32B))
- {
- hi2s->RxXferSize = Size*2;
- hi2s->RxXferCount = Size*2;
- }
- else
- {
- hi2s->RxXferSize = Size;
- hi2s->RxXferCount = Size;
- }
- /* Process Locked */
- __HAL_LOCK(hi2s);
-
- hi2s->State = HAL_I2S_STATE_BUSY_RX;
-
- /* Check if the I2S is already enabled */
- if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
- {
- /* Enable I2S peripheral */
- __HAL_I2S_ENABLE(hi2s);
- }
-
- /* Check if Master Receiver mode is selected */
- if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
- {
- /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
- access to the SPI_SR register. */
- __HAL_I2S_CLEAR_OVRFLAG(hi2s);
- }
-
- /* Receive data */
- while(hi2s->RxXferCount > 0)
- {
- /* Wait until RXNE flag is set */
- if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- (*pData++) = hi2s->Instance->DR;
- hi2s->RxXferCount--;
- }
-
- hi2s->State = HAL_I2S_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Transmit an amount of data in non-blocking mode with Interrupt
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @param pData: a 16-bit pointer to data buffer.
- * @param Size: number of data sample to be sent:
- * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
- * configuration phase, the Size parameter means the number of 16-bit data length
- * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
- * the Size parameter means the number of 16-bit data length.
- * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
- * between Master and Slave(example: audio streaming).
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
-{
- uint32_t tmp1 = 0, tmp2 = 0;
- if(hi2s->State == HAL_I2S_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- hi2s->pTxBuffPtr = pData;
- tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
- tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
- if((tmp1 == I2S_DATAFORMAT_24B)|| \
- (tmp2 == I2S_DATAFORMAT_32B))
- {
- hi2s->TxXferSize = Size*2;
- hi2s->TxXferCount = Size*2;
- }
- else
- {
- hi2s->TxXferSize = Size;
- hi2s->TxXferCount = Size;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2s);
-
- hi2s->State = HAL_I2S_STATE_BUSY_TX;
- hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
-
- /* Enable TXE and ERR interrupt */
- __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
-
- /* Check if the I2S is already enabled */
- if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
- {
- /* Enable I2S peripheral */
- __HAL_I2S_ENABLE(hi2s);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive an amount of data in non-blocking mode with Interrupt
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @param pData: a 16-bit pointer to the Receive data buffer.
- * @param Size: number of data sample to be sent:
- * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
- * configuration phase, the Size parameter means the number of 16-bit data length
- * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
- * the Size parameter means the number of 16-bit data length.
- * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
- * between Master and Slave(example: audio streaming).
- * @note It is recommended to use DMA for the I2S receiver to avoid de-synchronisation
- * between Master and Slave otherwise the I2S interrupt should be optimized.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
-{
- uint32_t tmp1 = 0, tmp2 = 0;
- if(hi2s->State == HAL_I2S_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- hi2s->pRxBuffPtr = pData;
- tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
- tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
- if((tmp1 == I2S_DATAFORMAT_24B)||\
- (tmp2 == I2S_DATAFORMAT_32B))
- {
- hi2s->RxXferSize = Size*2;
- hi2s->RxXferCount = Size*2;
- }
- else
- {
- hi2s->RxXferSize = Size;
- hi2s->RxXferCount = Size;
- }
- /* Process Locked */
- __HAL_LOCK(hi2s);
-
- hi2s->State = HAL_I2S_STATE_BUSY_RX;
- hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
-
- /* Enable TXE and ERR interrupt */
- __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
-
- /* Check if the I2S is already enabled */
- if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
- {
- /* Enable I2S peripheral */
- __HAL_I2S_ENABLE(hi2s);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
-
- return HAL_OK;
- }
-
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Transmit an amount of data in non-blocking mode with DMA
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @param pData: a 16-bit pointer to the Transmit data buffer.
- * @param Size: number of data sample to be sent:
- * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
- * configuration phase, the Size parameter means the number of 16-bit data length
- * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
- * the Size parameter means the number of 16-bit data length.
- * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
- * between Master and Slave(example: audio streaming).
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
-{
- uint32_t *tmp;
- uint32_t tmp1 = 0, tmp2 = 0;
-
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(hi2s->State == HAL_I2S_STATE_READY)
- {
- hi2s->pTxBuffPtr = pData;
- tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
- tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
- if((tmp1 == I2S_DATAFORMAT_24B)|| \
- (tmp2 == I2S_DATAFORMAT_32B))
- {
- hi2s->TxXferSize = Size*2;
- hi2s->TxXferCount = Size*2;
- }
- else
- {
- hi2s->TxXferSize = Size;
- hi2s->TxXferCount = Size;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2s);
-
- hi2s->State = HAL_I2S_STATE_BUSY_TX;
- hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
-
- /* Set the I2S Tx DMA Half transfer complete callback */
- hi2s->hdmatx->XferHalfCpltCallback = I2S_DMATxHalfCplt;
-
- /* Set the I2S Tx DMA transfer complete callback */
- hi2s->hdmatx->XferCpltCallback = I2S_DMATxCplt;
-
- /* Set the DMA error callback */
- hi2s->hdmatx->XferErrorCallback = I2S_DMAError;
-
- /* Enable the Tx DMA Stream */
- tmp = (uint32_t*)&pData;
- HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t*)tmp, (uint32_t)&hi2s->Instance->DR, hi2s->TxXferSize);
-
- /* Check if the I2S is already enabled */
- if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
- {
- /* Enable I2S peripheral */
- __HAL_I2S_ENABLE(hi2s);
- }
-
- /* Check if the I2S Tx request is already enabled */
- if((hi2s->Instance->CR2 & SPI_CR2_TXDMAEN) != SPI_CR2_TXDMAEN)
- {
- /* Enable Tx DMA Request */
- hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive an amount of data in non-blocking mode with DMA
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @param pData: a 16-bit pointer to the Receive data buffer.
- * @param Size: number of data sample to be sent:
- * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
- * configuration phase, the Size parameter means the number of 16-bit data length
- * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
- * the Size parameter means the number of 16-bit data length.
- * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
- * between Master and Slave(example: audio streaming).
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size)
-{
- uint32_t *tmp;
- uint32_t tmp1 = 0, tmp2 = 0;
-
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(hi2s->State == HAL_I2S_STATE_READY)
- {
- hi2s->pRxBuffPtr = pData;
- tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
- tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
- if((tmp1 == I2S_DATAFORMAT_24B)|| \
- (tmp2 == I2S_DATAFORMAT_32B))
- {
- hi2s->RxXferSize = Size*2;
- hi2s->RxXferCount = Size*2;
- }
- else
- {
- hi2s->RxXferSize = Size;
- hi2s->RxXferCount = Size;
- }
- /* Process Locked */
- __HAL_LOCK(hi2s);
-
- hi2s->State = HAL_I2S_STATE_BUSY_RX;
- hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
-
- /* Set the I2S Rx DMA Half transfer complete callback */
- hi2s->hdmarx->XferHalfCpltCallback = I2S_DMARxHalfCplt;
-
- /* Set the I2S Rx DMA transfer complete callback */
- hi2s->hdmarx->XferCpltCallback = I2S_DMARxCplt;
-
- /* Set the DMA error callback */
- hi2s->hdmarx->XferErrorCallback = I2S_DMAError;
-
- /* Check if Master Receiver mode is selected */
- if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
- {
- /* Clear the Overrun Flag by a read operation to the SPI_DR register followed by a read
- access to the SPI_SR register. */
- __HAL_I2S_CLEAR_OVRFLAG(hi2s);
- }
-
- /* Enable the Rx DMA Stream */
- tmp = (uint32_t*)&pData;
- HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, *(uint32_t*)tmp, hi2s->RxXferSize);
-
- /* Check if the I2S is already enabled */
- if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
- {
- /* Enable I2S peripheral */
- __HAL_I2S_ENABLE(hi2s);
- }
-
- /* Check if the I2S Rx request is already enabled */
- if((hi2s->Instance->CR2 &SPI_CR2_RXDMAEN) != SPI_CR2_RXDMAEN)
- {
- /* Enable Rx DMA Request */
- hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Pauses the audio stream playing from the Media.
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval HAL status
- */
-__weak HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s)
-{
- /* Process Locked */
- __HAL_LOCK(hi2s);
-
- if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
- {
- /* Disable the I2S DMA Tx request */
- hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
- }
- else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
- {
- /* Disable the I2S DMA Rx request */
- hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
- }
- else if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
- {
- if((hi2s->Init.Mode == I2S_MODE_SLAVE_TX)||(hi2s->Init.Mode == I2S_MODE_MASTER_TX))
- {
- /* Disable the I2S DMA Tx request */
- hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
- }
- else
- {
- /* Disable the I2S DMA Rx request */
- hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
- }
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
-
- return HAL_OK;
-}
-
-/**
- * @brief Resumes the audio stream playing from the Media.
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval HAL status
- */
-__weak HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s)
-{
- /* Process Locked */
- __HAL_LOCK(hi2s);
-
- if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
- {
- /* Enable the I2S DMA Tx request */
- hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
- }
- else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
- {
- /* Enable the I2S DMA Rx request */
- hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
- }
- else if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
- {
- if((hi2s->Init.Mode == I2S_MODE_SLAVE_TX)||(hi2s->Init.Mode == I2S_MODE_MASTER_TX))
- {
- /* Enable the I2S DMA Tx request */
- hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
- }
- else
- {
- /* Enable the I2S DMA Rx request */
- hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
- }
- }
-
- /* If the I2S peripheral is still not enabled, enable it */
- if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) == 0)
- {
- /* Enable I2S peripheral */
- __HAL_I2S_ENABLE(hi2s);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
-
- return HAL_OK;
-}
-
-/**
- * @brief Resumes the audio stream playing from the Media.
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval HAL status
- */
-__weak HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s)
-{
- /* Process Locked */
- __HAL_LOCK(hi2s);
-
- /* Disable the I2S Tx/Rx DMA requests */
- hi2s->Instance->CR2 &= ~SPI_CR2_TXDMAEN;
- hi2s->Instance->CR2 &= ~SPI_CR2_RXDMAEN;
-
- /* Abort the I2S DMA Stream tx */
- if(hi2s->hdmatx != NULL)
- {
- HAL_DMA_Abort(hi2s->hdmatx);
- }
- /* Abort the I2S DMA Stream rx */
- if(hi2s->hdmarx != NULL)
- {
- HAL_DMA_Abort(hi2s->hdmarx);
- }
-
- /* Disable I2S peripheral */
- __HAL_I2S_DISABLE(hi2s);
-
- hi2s->State = HAL_I2S_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
-
- return HAL_OK;
-}
-
-/**
- * @brief This function handles I2S interrupt request.
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval None
- */
-__weak void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s)
-{
- uint32_t tmp1 = 0, tmp2 = 0;
-
- if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
- {
- tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_RXNE);
- tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_RXNE);
- /* I2S in mode Receiver ------------------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- I2S_Receive_IT(hi2s);
- }
-
- tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR);
- tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
- /* I2S Overrun error interrupt occurred ---------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- __HAL_I2S_CLEAR_OVRFLAG(hi2s);
- hi2s->ErrorCode |= HAL_I2S_ERROR_OVR;
- }
- }
-
- if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
- {
- tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_TXE);
- tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_TXE);
- /* I2S in mode Transmitter -----------------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- I2S_Transmit_IT(hi2s);
- }
-
- tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR);
- tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
- /* I2S Underrun error interrupt occurred --------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- __HAL_I2S_CLEAR_UDRFLAG(hi2s);
- hi2s->ErrorCode |= HAL_I2S_ERROR_UDR;
- }
- }
-
- /* Call the Error call Back in case of Errors */
- if(hi2s->ErrorCode != HAL_I2S_ERROR_NONE)
- {
- /* Set the I2S state ready to be able to start again the process */
- hi2s->State= HAL_I2S_STATE_READY;
- HAL_I2S_ErrorCallback(hi2s);
- }
-}
-
-/**
- * @brief Tx Transfer Half completed callbacks
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval None
- */
- __weak void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_I2S_TxHalfCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Tx Transfer completed callbacks
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval None
- */
- __weak void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_I2S_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Transfer half completed callbacks
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval None
- */
-__weak void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_I2S_RxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Transfer completed callbacks
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval None
- */
-__weak void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_I2S_RxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief I2S error callbacks
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval None
- */
- __weak void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_I2S_ErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup I2S_Exported_Functions_Group3 Peripheral State and Errors functions
- * @brief Peripheral State functions
-@verbatim
- ===============================================================================
- ##### Peripheral State and Errors functions #####
- ===============================================================================
- [..]
- This subsection permits to get in run-time the status of the peripheral
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Return the I2S state
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval HAL state
- */
-HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s)
-{
- return hi2s->State;
-}
-
-/**
- * @brief Return the I2S error code
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval I2S Error Code
- */
-uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s)
-{
- return hi2s->ErrorCode;
-}
-/**
- * @}
- */
-
-/**
- * @brief DMA I2S transmit process half complete callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
- void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
-{
- I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- HAL_I2S_TxHalfCpltCallback(hi2s);
-}
-
-/**
- * @brief DMA I2S receive process half complete callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
-{
- I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- HAL_I2S_RxHalfCpltCallback(hi2s);
-}
-
-/**
- * @brief DMA I2S communication error callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-void I2S_DMAError(DMA_HandleTypeDef *hdma)
-{
- I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- hi2s->TxXferCount = 0;
- hi2s->RxXferCount = 0;
-
- hi2s->State= HAL_I2S_STATE_READY;
-
- hi2s->ErrorCode |= HAL_I2S_ERROR_DMA;
- HAL_I2S_ErrorCallback(hi2s);
-}
-
-/**
- * @brief Transmit an amount of data in non-blocking mode with Interrupt
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval HAL status
- */
-HAL_StatusTypeDef I2S_Transmit_IT(I2S_HandleTypeDef *hi2s)
-{
- if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
- {
- /* Process Locked */
- __HAL_LOCK(hi2s);
-
- /* Transmit data */
- hi2s->Instance->DR = (*hi2s->pTxBuffPtr++);
-
- hi2s->TxXferCount--;
-
- if(hi2s->TxXferCount == 0)
- {
- /* Disable TXE and ERR interrupt */
- __HAL_I2S_DISABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
-
- hi2s->State = HAL_I2S_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
- HAL_I2S_TxCpltCallback(hi2s);
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
- }
-
- return HAL_OK;
- }
-
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive an amount of data in non-blocking mode with Interrupt
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval HAL status
- */
-HAL_StatusTypeDef I2S_Receive_IT(I2S_HandleTypeDef *hi2s)
-{
- if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
- {
- /* Process Locked */
- __HAL_LOCK(hi2s);
-
- /* Receive data */
- (*hi2s->pRxBuffPtr++) = hi2s->Instance->DR;
-
- hi2s->RxXferCount--;
-
- /* Check if Master Receiver mode is selected */
- if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
- {
- /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
- access to the SPI_SR register. */
- __HAL_I2S_CLEAR_OVRFLAG(hi2s);
- }
-
- if(hi2s->RxXferCount == 0)
- {
- /* Disable RXNE and ERR interrupt */
- __HAL_I2S_DISABLE_IT(hi2s, I2S_IT_RXNE | I2S_IT_ERR);
-
- hi2s->State = HAL_I2S_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
-
- HAL_I2S_RxCpltCallback(hi2s);
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
- }
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief This function handles I2S Communication Timeout.
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @param Flag: Flag checked
- * @param Status: Value of the flag expected
- * @param Timeout: Duration of the timeout
- * @retval HAL status
- */
-HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, uint32_t Status, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait until flag is set */
- if(Status == RESET)
- {
- while(__HAL_I2S_GET_FLAG(hi2s, Flag) == RESET)
- {
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Set the I2S State ready */
- hi2s->State= HAL_I2S_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- else
- {
- while(__HAL_I2S_GET_FLAG(hi2s, Flag) != RESET)
- {
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Set the I2S State ready */
- hi2s->State= HAL_I2S_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-#endif /* HAL_I2S_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s_ex.c
deleted file mode 100644
index 3296c13..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_i2s_ex.c
+++ /dev/null
@@ -1,1479 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_i2s_ex.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief I2S HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of I2S extension peripheral:
- * + Extension features Functions
- *
- @verbatim
- ==============================================================================
- ##### I2S Extension features #####
- ==============================================================================
- [..]
- (#) In I2S full duplex mode, each SPI peripheral is able to manage sending and receiving
- data simultaneously using two data lines. Each SPI peripheral has an extended block
- called I2Sxext (i.e I2S2ext for SPI2 and I2S3ext for SPI3).
- (#) The extension block is not a full SPI IP, it is used only as I2S slave to
- implement full duplex mode. The extension block uses the same clock sources
- as its master.
-
- (#) Both I2Sx and I2Sx_ext can be configured as transmitters or receivers.
-
- [..]
- (@) Only I2Sx can deliver SCK and WS to I2Sx_ext in full duplex mode, where
- I2Sx can be I2S2 or I2S3.
-
- ##### How to use this driver #####
- ===============================================================================
- [..]
- Three operation modes are available within this driver :
-
- *** Polling mode IO operation ***
- =================================
- [..]
- (+) Send and receive in the same time an amount of data in blocking mode using HAL_I2S_TransmitReceive()
-
- *** Interrupt mode IO operation ***
- ===================================
- [..]
- (+) Send and receive in the same time an amount of data in non blocking mode using HAL_I2S_TransmitReceive_IT()
- (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback
- (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2S_TxCpltCallback
- (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback
- (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2S_RxCpltCallback
- (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_I2S_ErrorCallback
-
- *** DMA mode IO operation ***
- ==============================
- [..]
- (+) Send and receive an amount of data in non blocking mode (DMA) using HAL_I2S_TransmitReceive_DMA()
- (+) At transmission end of half transfer HAL_I2S_TxHalfCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2S_TxHalfCpltCallback
- (+) At transmission end of transfer HAL_I2S_TxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2S_TxCpltCallback
- (+) At reception end of half transfer HAL_I2S_RxHalfCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2S_RxHalfCpltCallback
- (+) At reception end of transfer HAL_I2S_RxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_I2S_RxCpltCallback
- (+) In case of transfer Error, HAL_I2S_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_I2S_ErrorCallback
- (+) Pause the DMA Transfer using HAL_I2S_DMAPause()
- (+) Resume the DMA Transfer using HAL_I2S_DMAResume()
- (+) Stop the DMA Transfer using HAL_I2S_DMAStop()
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup I2SEx I2SEx
- * @brief I2S HAL module driver
- * @{
- */
-
-#ifdef HAL_I2S_MODULE_ENABLED
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
- defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
- defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/** @addtogroup I2SEx_Private_Functions
- * @{
- */
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup I2SEx_Exported_Functions I2S Exported Functions
- * @{
- */
-
-/** @defgroup I2SEx_Group1 Extension features functions
- * @brief Extension features functions
- *
-@verbatim
- ===============================================================================
- ##### Extension features Functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to manage the I2S data
- transfers.
-
- (#) There are two modes of transfer:
- (++) Blocking mode : The communication is performed in the polling mode.
- The status of all data processing is returned by the same function
- after finishing transfer.
- (++) No-Blocking mode : The communication is performed using Interrupts
- or DMA. These functions return the status of the transfer startup.
- The end of the data processing will be indicated through the
- dedicated I2S IRQ when using Interrupt mode or the DMA IRQ when
- using DMA mode.
-
- (#) Blocking mode functions are :
- (++) HAL_I2S_TransmitReceive()
-
- (#) No-Blocking mode functions with Interrupt are :
- (++) HAL_I2S_TransmitReceive_IT()
-
- (#) No-Blocking mode functions with DMA are :
- (++) HAL_I2S_TransmitReceive_DMA()
-
- (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
- (++) HAL_I2S_TxCpltCallback()
- (++) HAL_I2S_RxCpltCallback()
- (++) HAL_I2S_ErrorCallback()
-
-@endverbatim
- * @{
- */
-/**
- * @brief Initializes the I2S according to the specified parameters
- * in the I2S_InitTypeDef and create the associated handle.
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s)
-{
- uint32_t tmpreg = 0, i2sdiv = 2, i2sodd = 0, packetlength = 1;
- uint32_t tmp = 0, i2sclk = 0;
-
- /* Check the I2S handle allocation */
- if(hi2s == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the I2S parameters */
- assert_param(IS_I2S_MODE(hi2s->Init.Mode));
- assert_param(IS_I2S_STANDARD(hi2s->Init.Standard));
- assert_param(IS_I2S_DATA_FORMAT(hi2s->Init.DataFormat));
- assert_param(IS_I2S_MCLK_OUTPUT(hi2s->Init.MCLKOutput));
- assert_param(IS_I2S_AUDIO_FREQ(hi2s->Init.AudioFreq));
- assert_param(IS_I2S_CPOL(hi2s->Init.CPOL));
- assert_param(IS_I2S_CLOCKSOURCE(hi2s->Init.ClockSource));
-
- if(hi2s->State == HAL_I2S_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hi2s->Lock = HAL_UNLOCKED;
- /* Init the low level hardware : GPIO, CLOCK, CORTEX */
- HAL_I2S_MspInit(hi2s);
- }
-
- hi2s->State = HAL_I2S_STATE_BUSY;
-
- /*----------------------- SPIx I2SCFGR & I2SPR Configuration ---------------*/
- /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */
- hi2s->Instance->I2SCFGR &= ~(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \
- SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \
- SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD);
- hi2s->Instance->I2SPR = 0x0002;
-
- /* Get the I2SCFGR register value */
- tmpreg = hi2s->Instance->I2SCFGR;
-
- /* If the default frequency value has to be written, reinitialize i2sdiv and i2sodd */
- /* If the requested audio frequency is not the default, compute the prescaler */
- if(hi2s->Init.AudioFreq != I2S_AUDIOFREQ_DEFAULT)
- {
- /* Check the frame length (For the Prescaler computing) *******************/
- if(hi2s->Init.DataFormat != I2S_DATAFORMAT_16B)
- {
- /* Packet length is 32 bits */
- packetlength = 2;
- }
-
- /* Get I2S source Clock frequency ****************************************/
- i2sclk = I2S_GetInputClock(hi2s);
-
- /* Compute the Real divider depending on the MCLK output state, with a floating point */
- if(hi2s->Init.MCLKOutput == I2S_MCLKOUTPUT_ENABLE)
- {
- /* MCLK output is enabled */
- tmp = (uint32_t)(((((i2sclk / 256) * 10) / hi2s->Init.AudioFreq)) + 5);
- }
- else
- {
- /* MCLK output is disabled */
- tmp = (uint32_t)(((((i2sclk / (32 * packetlength)) *10 ) / hi2s->Init.AudioFreq)) + 5);
- }
-
- /* Remove the flatting point */
- tmp = tmp / 10;
-
- /* Check the parity of the divider */
- i2sodd = (uint32_t)(tmp & (uint32_t)1);
-
- /* Compute the i2sdiv prescaler */
- i2sdiv = (uint32_t)((tmp - i2sodd) / 2);
-
- /* Get the Mask for the Odd bit (SPI_I2SPR[8]) register */
- i2sodd = (uint32_t) (i2sodd << 8);
- }
-
- /* Test if the divider is 1 or 0 or greater than 0xFF */
- if((i2sdiv < 2) || (i2sdiv > 0xFF))
- {
- /* Set the default values */
- i2sdiv = 2;
- i2sodd = 0;
- }
-
- /* Write to SPIx I2SPR register the computed value */
- hi2s->Instance->I2SPR = (uint32_t)((uint32_t)i2sdiv | (uint32_t)(i2sodd | (uint32_t)hi2s->Init.MCLKOutput));
-
- /* Configure the I2S with the I2S_InitStruct values */
- tmpreg |= (uint32_t)(SPI_I2SCFGR_I2SMOD | hi2s->Init.Mode | hi2s->Init.Standard | hi2s->Init.DataFormat | hi2s->Init.CPOL);
-
-#if defined(SPI_I2SCFGR_ASTRTEN)
- if (hi2s->Init.Standard == I2S_STANDARD_PCM_SHORT)
- {
- /* Write to SPIx I2SCFGR */
- hi2s->Instance->I2SCFGR = tmpreg | SPI_I2SCFGR_ASTRTEN;
- }
- else
- {
- /* Write to SPIx I2SCFGR */
- hi2s->Instance->I2SCFGR = tmpreg;
- }
-#else
- /* Write to SPIx I2SCFGR */
- hi2s->Instance->I2SCFGR = tmpreg;
-#endif
-
- /* Configure the I2S extended if the full duplex mode is enabled */
- assert_param(IS_I2S_FULLDUPLEX_MODE(hi2s->Init.FullDuplexMode));
- if(hi2s->Init.FullDuplexMode == I2S_FULLDUPLEXMODE_ENABLE)
- {
- /* Clear I2SMOD, I2SE, I2SCFG, PCMSYNC, I2SSTD, CKPOL, DATLEN and CHLEN bits */
- I2SxEXT(hi2s->Instance)->I2SCFGR &= ~(SPI_I2SCFGR_CHLEN | SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CKPOL | \
- SPI_I2SCFGR_I2SSTD | SPI_I2SCFGR_PCMSYNC | SPI_I2SCFGR_I2SCFG | \
- SPI_I2SCFGR_I2SE | SPI_I2SCFGR_I2SMOD);
- I2SxEXT(hi2s->Instance)->I2SPR = 2;
-
- /* Get the I2SCFGR register value */
- tmpreg = I2SxEXT(hi2s->Instance)->I2SCFGR;
-
- /* Get the mode to be configured for the extended I2S */
- if((hi2s->Init.Mode == I2S_MODE_MASTER_TX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_TX))
- {
- tmp = I2S_MODE_SLAVE_RX;
- }
- else
- {
- if((hi2s->Init.Mode == I2S_MODE_MASTER_RX) || (hi2s->Init.Mode == I2S_MODE_SLAVE_RX))
- {
- tmp = I2S_MODE_SLAVE_TX;
- }
- }
-
- /* Configure the I2S Slave with the I2S Master parameter values */
- tmpreg |= (uint32_t)(SPI_I2SCFGR_I2SMOD | tmp | hi2s->Init.Standard | hi2s->Init.DataFormat | hi2s->Init.CPOL);
-
- /* Write to SPIx I2SCFGR */
- I2SxEXT(hi2s->Instance)->I2SCFGR = tmpreg;
- }
-
- hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
- hi2s->State= HAL_I2S_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Full-Duplex Transmit/Receive data in blocking mode.
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @param pTxData: a 16-bit pointer to the Transmit data buffer.
- * @param pRxData: a 16-bit pointer to the Receive data buffer.
- * @param Size: number of data sample to be sent:
- * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
- * configuration phase, the Size parameter means the number of 16-bit data length
- * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
- * the Size parameter means the number of 16-bit data length.
- * @param Timeout: Timeout duration
- * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
- * between Master and Slave(example: audio streaming).
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
- uint32_t tmp1 = 0, tmp2 = 0;
-
- if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Check the I2S State */
- if(hi2s->State == HAL_I2S_STATE_READY)
- {
- tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
- tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
- /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended
- is selected during the I2S configuration phase, the Size parameter means the number
- of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data
- frame is selected the Size parameter means the number of 16-bit data length. */
- if((tmp1 == I2S_DATAFORMAT_24B)|| \
- (tmp2 == I2S_DATAFORMAT_32B))
- {
- hi2s->TxXferSize = Size*2;
- hi2s->TxXferCount = Size*2;
- hi2s->RxXferSize = Size*2;
- hi2s->RxXferCount = Size*2;
- }
- else
- {
- hi2s->TxXferSize = Size;
- hi2s->TxXferCount = Size;
- hi2s->RxXferSize = Size;
- hi2s->RxXferCount = Size;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2s);
-
- /* Set the I2S State busy TX/RX */
- hi2s->State = HAL_I2S_STATE_BUSY_TX_RX;
-
- tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
- tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
- /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
- if((tmp1 == I2S_MODE_MASTER_TX) || (tmp2 == I2S_MODE_SLAVE_TX))
- {
- /* Check if the I2S is already enabled: The I2S is kept enabled at the end of transaction
- to avoid the clock de-synchronization between Master and Slave. */
- if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
- {
- /* Enable I2Sext(receiver) before enabling I2Sx peripheral */
- I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
-
- /* Enable I2Sx peripheral */
- __HAL_I2S_ENABLE(hi2s);
- }
-
- while(hi2s->TxXferCount > 0)
- {
- /* Wait until TXE flag is set */
- if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- hi2s->Instance->DR = (*pTxData++);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait until RXNE flag is set */
- while((I2SxEXT(hi2s->Instance)->SR & SPI_SR_RXNE) != SPI_SR_RXNE)
- {
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
-
- return HAL_TIMEOUT;
- }
- }
- }
- (*pRxData++) = I2SxEXT(hi2s->Instance)->DR;
-
- hi2s->TxXferCount--;
- hi2s->RxXferCount--;
- }
- }
- /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */
- else
- {
- /* Check if the I2S is already enabled */
- if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
- {
- /* Enable I2S peripheral before the I2Sext*/
- __HAL_I2S_ENABLE(hi2s);
-
- /* Enable I2Sext(transmitter) after enabling I2Sx peripheral */
- I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
- }
- else
- {
- /* Check if Master Receiver mode is selected */
- if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
- {
- /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
- access to the SPI_SR register. */
- __HAL_I2S_CLEAR_OVRFLAG(hi2s);
- }
- }
- while(hi2s->TxXferCount > 0)
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait until TXE flag is set */
- while((I2SxEXT(hi2s->Instance)->SR & SPI_SR_TXE) != SPI_SR_TXE)
- {
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
-
- return HAL_TIMEOUT;
- }
- }
- }
- I2SxEXT(hi2s->Instance)->DR = (*pTxData++);
-
- /* Wait until RXNE flag is set */
- if (I2S_WaitFlagStateUntilTimeout(hi2s, I2S_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- (*pRxData++) = hi2s->Instance->DR;
-
- hi2s->TxXferCount--;
- hi2s->RxXferCount--;
- }
- }
-
- /* Set the I2S State ready */
- hi2s->State = HAL_I2S_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Full-Duplex Transmit/Receive data in non-blocking mode using Interrupt
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @param pTxData: a 16-bit pointer to the Transmit data buffer.
- * @param pRxData: a 16-bit pointer to the Receive data buffer.
- * @param Size: number of data sample to be sent:
- * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
- * configuration phase, the Size parameter means the number of 16-bit data length
- * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
- * the Size parameter means the number of 16-bit data length.
- * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
- * between Master and Slave(example: audio streaming).
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size)
-{
- uint32_t tmp1 = 0, tmp2 = 0;
-
- if(hi2s->State == HAL_I2S_STATE_READY)
- {
- if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- hi2s->pTxBuffPtr = pTxData;
- hi2s->pRxBuffPtr = pRxData;
-
- tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
- tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
- /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended
- is selected during the I2S configuration phase, the Size parameter means the number
- of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data
- frame is selected the Size parameter means the number of 16-bit data length. */
- if((tmp1 == I2S_DATAFORMAT_24B)||\
- (tmp2 == I2S_DATAFORMAT_32B))
- {
- hi2s->TxXferSize = Size*2;
- hi2s->TxXferCount = Size*2;
- hi2s->RxXferSize = Size*2;
- hi2s->RxXferCount = Size*2;
- }
- else
- {
- hi2s->TxXferSize = Size;
- hi2s->TxXferCount = Size;
- hi2s->RxXferSize = Size;
- hi2s->RxXferCount = Size;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2s);
-
- hi2s->State = HAL_I2S_STATE_BUSY_TX_RX;
- hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
-
- tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
- tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
- /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
- if((tmp1 == I2S_MODE_MASTER_TX) || (tmp2 == I2S_MODE_SLAVE_TX))
- {
- /* Enable I2Sext RXNE and ERR interrupts */
- I2SxEXT(hi2s->Instance)->CR2 |= (I2S_IT_RXNE | I2S_IT_ERR);
-
- /* Enable I2Sx TXE and ERR interrupts */
- __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_TXE | I2S_IT_ERR));
-
- /* Check if the I2S is already enabled */
- if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
- {
- /* Enable I2Sext(receiver) before enabling I2Sx peripheral */
- I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
-
- /* Enable I2Sx peripheral */
- __HAL_I2S_ENABLE(hi2s);
- }
- }
- /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */
- else
- {
- /* Enable I2Sext TXE and ERR interrupts */
- I2SxEXT(hi2s->Instance)->CR2 |= (I2S_IT_TXE |I2S_IT_ERR);
-
- /* Enable I2Sext RXNE and ERR interrupts */
- __HAL_I2S_ENABLE_IT(hi2s, (I2S_IT_RXNE | I2S_IT_ERR));
-
- /* Check if the I2S is already enabled */
- if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
- {
- /* Check if the I2S_MODE_MASTER_RX is selected */
- if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
- {
- /* Prepare the First Data before enabling the I2S */
- if(hi2s->TxXferCount != 0)
- {
- /* Transmit First data */
- I2SxEXT(hi2s->Instance)->DR = (*hi2s->pTxBuffPtr++);
- hi2s->TxXferCount--;
-
- if(hi2s->TxXferCount == 0)
- {
- /* Disable I2Sext TXE interrupt */
- I2SxEXT(hi2s->Instance)->CR2 &= ~I2S_IT_TXE;
- }
- }
- }
- /* Enable I2S peripheral */
- __HAL_I2S_ENABLE(hi2s);
-
- /* Enable I2Sext(transmitter) after enabling I2Sx peripheral */
- I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
- }
- }
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Full-Duplex Transmit/Receive data in non-blocking mode using DMA
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @param pTxData: a 16-bit pointer to the Transmit data buffer.
- * @param pRxData: a 16-bit pointer to the Receive data buffer.
- * @param Size: number of data sample to be sent:
- * @note When a 16-bit data frame or a 16-bit data frame extended is selected during the I2S
- * configuration phase, the Size parameter means the number of 16-bit data length
- * in the transaction and when a 24-bit data frame or a 32-bit data frame is selected
- * the Size parameter means the number of 16-bit data length.
- * @note The I2S is kept enabled at the end of transaction to avoid the clock de-synchronization
- * between Master and Slave(example: audio streaming).
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size)
-{
- uint32_t *tmp;
- uint32_t tmp1 = 0, tmp2 = 0;
-
- if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(hi2s->State == HAL_I2S_STATE_READY)
- {
- hi2s->pTxBuffPtr = pTxData;
- hi2s->pRxBuffPtr = pRxData;
-
- tmp1 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
- tmp2 = hi2s->Instance->I2SCFGR & (SPI_I2SCFGR_DATLEN | SPI_I2SCFGR_CHLEN);
- /* Check the Data format: When a 16-bit data frame or a 16-bit data frame extended
- is selected during the I2S configuration phase, the Size parameter means the number
- of 16-bit data length in the transaction and when a 24-bit data frame or a 32-bit data
- frame is selected the Size parameter means the number of 16-bit data length. */
- if((tmp1 == I2S_DATAFORMAT_24B)||\
- (tmp2 == I2S_DATAFORMAT_32B))
- {
- hi2s->TxXferSize = Size*2;
- hi2s->TxXferCount = Size*2;
- hi2s->RxXferSize = Size*2;
- hi2s->RxXferCount = Size*2;
- }
- else
- {
- hi2s->TxXferSize = Size;
- hi2s->TxXferCount = Size;
- hi2s->RxXferSize = Size;
- hi2s->RxXferCount = Size;
- }
-
- /* Process Locked */
- __HAL_LOCK(hi2s);
-
- hi2s->State = HAL_I2S_STATE_BUSY_TX_RX;
- hi2s->ErrorCode = HAL_I2S_ERROR_NONE;
-
- /* Set the I2S Rx DMA Half transfer complete callback */
- hi2s->hdmarx->XferHalfCpltCallback = I2S_DMARxHalfCplt;
-
- /* Set the I2S Rx DMA transfer complete callback */
- hi2s->hdmarx->XferCpltCallback = I2S_DMARxCplt;
-
- /* Set the I2S Rx DMA error callback */
- hi2s->hdmarx->XferErrorCallback = I2S_DMAError;
-
- /* Set the I2S Tx DMA Half transfer complete callback */
- hi2s->hdmatx->XferHalfCpltCallback = I2S_DMATxHalfCplt;
-
- /* Set the I2S Tx DMA transfer complete callback */
- hi2s->hdmatx->XferCpltCallback = I2S_DMATxCplt;
-
- /* Set the I2S Tx DMA error callback */
- hi2s->hdmatx->XferErrorCallback = I2S_DMAError;
-
- tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
- tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
- /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
- if((tmp1 == I2S_MODE_MASTER_TX) || (tmp2 == I2S_MODE_SLAVE_TX))
- {
- /* Enable the Rx DMA Stream */
- tmp = (uint32_t*)&pRxData;
- HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&I2SxEXT(hi2s->Instance)->DR, *(uint32_t*)tmp, hi2s->RxXferSize);
-
- /* Enable Rx DMA Request */
- I2SxEXT(hi2s->Instance)->CR2 |= SPI_CR2_RXDMAEN;
-
- /* Enable the Tx DMA Stream */
- tmp = (uint32_t*)&pTxData;
- HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t*)tmp, (uint32_t)&hi2s->Instance->DR, hi2s->TxXferSize);
-
- /* Enable Tx DMA Request */
- hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
-
- /* Check if the I2S is already enabled */
- if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
- {
- /* Enable I2Sext(receiver) before enabling I2Sx peripheral */
- I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
-
- /* Enable I2S peripheral after the I2Sext */
- __HAL_I2S_ENABLE(hi2s);
- }
- }
- else
- {
- /* Enable the Tx DMA Stream */
- tmp = (uint32_t*)&pTxData;
- HAL_DMA_Start_IT(hi2s->hdmatx, *(uint32_t*)tmp, (uint32_t)&I2SxEXT(hi2s->Instance)->DR, hi2s->TxXferSize);
-
- /* Enable Tx DMA Request */
- I2SxEXT(hi2s->Instance)->CR2 |= SPI_CR2_TXDMAEN;
-
- /* Enable the Rx DMA Stream */
- tmp = (uint32_t*)&pRxData;
- HAL_DMA_Start_IT(hi2s->hdmarx, (uint32_t)&hi2s->Instance->DR, *(uint32_t*)tmp, hi2s->RxXferSize);
-
- /* Enable Rx DMA Request */
- hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
-
- /* Check if the I2S is already enabled */
- if((hi2s->Instance->I2SCFGR &SPI_I2SCFGR_I2SE) != SPI_I2SCFGR_I2SE)
- {
- /* Enable I2S peripheral before the I2Sext */
- __HAL_I2S_ENABLE(hi2s);
-
- /* Enable I2Sext(transmitter) after enabling I2Sx peripheral */
- I2SxEXT(hi2s->Instance)->I2SCFGR |= SPI_I2SCFGR_I2SE;
- }
- else
- {
- /* Check if Master Receiver mode is selected */
- if((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG) == I2S_MODE_MASTER_RX)
- {
- /* Clear the Overrun Flag by a read operation on the SPI_DR register followed by a read
- access to the SPI_SR register. */
- __HAL_I2S_CLEAR_OVRFLAG(hi2s);
- }
- }
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Pauses the audio stream playing from the Media.
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s)
-{
- /* Process Locked */
- __HAL_LOCK(hi2s);
-
- if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
- {
- /* Disable the I2S DMA Tx request */
- hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
- }
- else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
- {
- /* Disable the I2S DMA Rx request */
- hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
- }
- else if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
- {
- if((hi2s->Init.Mode == I2S_MODE_SLAVE_TX)||(hi2s->Init.Mode == I2S_MODE_MASTER_TX))
- {
- /* Disable the I2S DMA Tx request */
- hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
- /* Disable the I2SEx Rx DMA Request */
- I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
- }
- else
- {
- /* Disable the I2S DMA Rx request */
- hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
- /* Disable the I2SEx Tx DMA Request */
- I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
- }
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
-
- return HAL_OK;
-}
-
-/**
- * @brief Resumes the audio stream playing from the Media.
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s)
-{
- /* Process Locked */
- __HAL_LOCK(hi2s);
-
- if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
- {
- /* Enable the I2S DMA Tx request */
- hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
- }
- else if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
- {
- /* Enable the I2S DMA Rx request */
- hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
- }
- else if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
- {
- if((hi2s->Init.Mode == I2S_MODE_SLAVE_TX)||(hi2s->Init.Mode == I2S_MODE_MASTER_TX))
- {
- /* Enable the I2S DMA Tx request */
- hi2s->Instance->CR2 |= SPI_CR2_TXDMAEN;
- /* Disable the I2SEx Rx DMA Request */
- I2SxEXT(hi2s->Instance)->CR2 |= SPI_CR2_RXDMAEN;
- }
- else
- {
- /* Enable the I2S DMA Rx request */
- hi2s->Instance->CR2 |= SPI_CR2_RXDMAEN;
- /* Enable the I2SEx Tx DMA Request */
- I2SxEXT(hi2s->Instance)->CR2 |= SPI_CR2_TXDMAEN;
- }
- }
-
- /* If the I2S peripheral is still not enabled, enable it */
- if ((hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SE) == 0)
- {
- /* Enable I2S peripheral */
- __HAL_I2S_ENABLE(hi2s);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
-
- return HAL_OK;
-}
-
-/**
- * @brief Resumes the audio stream playing from the Media.
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s)
-{
- /* Process Locked */
- __HAL_LOCK(hi2s);
-
- /* Disable the I2S Tx/Rx DMA requests */
- hi2s->Instance->CR2 &= ~SPI_CR2_TXDMAEN;
- hi2s->Instance->CR2 &= ~SPI_CR2_RXDMAEN;
-
- if(hi2s->Init.FullDuplexMode == I2S_FULLDUPLEXMODE_ENABLE)
- {
- /* Disable the I2S extended Tx/Rx DMA requests */
- I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
- I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
- }
-
- /* Abort the I2S DMA Stream tx */
- if(hi2s->hdmatx != NULL)
- {
- HAL_DMA_Abort(hi2s->hdmatx);
- }
- /* Abort the I2S DMA Stream rx */
- if(hi2s->hdmarx != NULL)
- {
- HAL_DMA_Abort(hi2s->hdmarx);
- }
-
- /* Disable I2S peripheral */
- __HAL_I2S_DISABLE(hi2s);
-
- if(hi2s->Init.FullDuplexMode == I2S_FULLDUPLEXMODE_ENABLE)
- {
- /* Disable the I2Sext peripheral */
- I2SxEXT(hi2s->Instance)->I2SCFGR &= ~SPI_I2SCFGR_I2SE;
- }
- hi2s->State = HAL_I2S_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
-
- return HAL_OK;
-}
-
-/**
- * @brief This function handles I2S interrupt request.
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval None
- */
-void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s)
-{
- uint32_t tmp1 = 0, tmp2 = 0;
- __IO uint32_t tmpreg1 = 0;
- if(hi2s->Init.FullDuplexMode != I2S_FULLDUPLEXMODE_ENABLE)
- {
- if(hi2s->State == HAL_I2S_STATE_BUSY_RX)
- {
- tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_RXNE);
- tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_RXNE);
- /* I2S in mode Receiver ------------------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- I2S_Receive_IT(hi2s);
- }
-
- tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR);
- tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
- /* I2S Overrun error interrupt occurred ---------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- __HAL_I2S_CLEAR_OVRFLAG(hi2s);
- hi2s->ErrorCode |= HAL_I2S_ERROR_OVR;
- }
- }
-
- if(hi2s->State == HAL_I2S_STATE_BUSY_TX)
- {
- tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_TXE);
- tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_TXE);
- /* I2S in mode Tramitter -----------------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- I2S_Transmit_IT(hi2s);
- }
-
- tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR);
- tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
- /* I2S Underrun error interrupt occurred --------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- __HAL_I2S_CLEAR_UDRFLAG(hi2s);
- hi2s->ErrorCode |= HAL_I2S_ERROR_UDR;
- }
- }
- }
- else
- {
- tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
- tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
- /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
- if((tmp1 == I2S_MODE_MASTER_TX) || (tmp2 == I2S_MODE_SLAVE_TX))
- {
- tmp1 = I2SxEXT(hi2s->Instance)->SR & SPI_SR_RXNE;
- tmp2 = I2SxEXT(hi2s->Instance)->CR2 & I2S_IT_RXNE;
- /* I2Sext in mode Receiver ---------------------------------------------*/
- if((tmp1 == SPI_SR_RXNE) && (tmp2 == I2S_IT_RXNE))
- {
- tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
- tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
- /* When the I2S mode is configured as I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX,
- the I2Sext RXNE interrupt will be generated to manage the full-duplex receive phase. */
- if((tmp1 == I2S_MODE_MASTER_TX) || (tmp2 == I2S_MODE_SLAVE_TX))
- {
- I2SEx_TransmitReceive_IT(hi2s);
- }
- }
-
- tmp1 = I2SxEXT(hi2s->Instance)->SR & SPI_SR_OVR;
- tmp2 = I2SxEXT(hi2s->Instance)->CR2 & I2S_IT_ERR;
- /* I2Sext Overrun error interrupt occurred ------------------------------*/
- if((tmp1 == SPI_SR_OVR) && (tmp2 == I2S_IT_ERR))
- {
- /* Clear I2Sext OVR Flag */
- tmpreg1 = I2SxEXT(hi2s->Instance)->DR;
- tmpreg1 = I2SxEXT(hi2s->Instance)->SR;
- hi2s->ErrorCode |= HAL_I2SEX_ERROR_OVR;
- UNUSED(tmpreg1);
- }
-
- tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_TXE);
- tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_TXE);
- /* I2S in mode Tramitter -----------------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
- tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
- /* When the I2S mode is configured as I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX,
- the I2S TXE interrupt will be generated to manage the full-duplex transmit phase. */
- if((tmp1 == I2S_MODE_MASTER_TX) || (tmp2 == I2S_MODE_SLAVE_TX))
- {
- I2SEx_TransmitReceive_IT(hi2s);
- }
- }
-
- tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_UDR);
- tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
- /* I2S Underrun error interrupt occurred --------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- __HAL_I2S_CLEAR_UDRFLAG(hi2s);
- hi2s->ErrorCode |= HAL_I2S_ERROR_UDR;
- }
- }
- /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */
- else
- {
- tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_RXNE);
- tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_RXNE);
- /* I2S in mode Receiver ------------------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
- tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
- /* When the I2S mode is configured as I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX,
- the I2S RXNE interrupt will be generated to manage the full-duplex receive phase. */
- if((tmp1 == I2S_MODE_MASTER_RX) || (tmp2 == I2S_MODE_SLAVE_RX))
- {
- I2SEx_TransmitReceive_IT(hi2s);
- }
- }
-
- tmp1 = __HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_OVR);
- tmp2 = __HAL_I2S_GET_IT_SOURCE(hi2s, I2S_IT_ERR);
- /* I2S Overrun error interrupt occurred ---------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- __HAL_I2S_CLEAR_OVRFLAG(hi2s);
- hi2s->ErrorCode |= HAL_I2S_ERROR_OVR;
- }
-
- tmp1 = I2SxEXT(hi2s->Instance)->SR & SPI_SR_TXE;
- tmp2 = I2SxEXT(hi2s->Instance)->CR2 & I2S_IT_TXE;
- /* I2Sext in mode Tramitter --------------------------------------------*/
- if((tmp1 == SPI_SR_TXE) && (tmp2 == I2S_IT_TXE))
- {
- tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
- tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
- /* When the I2S mode is configured as I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX,
- the I2Sext TXE interrupt will be generated to manage the full-duplex transmit phase. */
- if((tmp1 == I2S_MODE_MASTER_RX) || (tmp2 == I2S_MODE_SLAVE_RX))
- {
- I2SEx_TransmitReceive_IT(hi2s);
- }
- }
-
- tmp1 = I2SxEXT(hi2s->Instance)->SR & SPI_SR_UDR;
- tmp2 = I2SxEXT(hi2s->Instance)->CR2 & I2S_IT_ERR;
- /* I2Sext Underrun error interrupt occurred -----------------------------*/
- if((tmp1 == SPI_SR_UDR) && (tmp2 == I2S_IT_ERR))
- {
- /* Clear I2Sext UDR Flag */
- tmpreg1 = I2SxEXT(hi2s->Instance)->SR;
- hi2s->ErrorCode |= HAL_I2SEX_ERROR_UDR;
- UNUSED(tmpreg1);
- }
- }
- }
-
- /* Call the Error call Back in case of Errors */
- if(hi2s->ErrorCode != HAL_I2S_ERROR_NONE)
- {
- /* Set the I2S state ready to be able to start again the process */
- hi2s->State= HAL_I2S_STATE_READY;
- HAL_I2S_ErrorCallback(hi2s);
- }
-}
-
-/**
- * @}
- */
-
-
-/**
- * @brief Full-Duplex Transmit/Receive data in non-blocking mode using Interrupt
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval HAL status
- */
-HAL_StatusTypeDef I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s)
-{
- uint32_t tmp1 = 0, tmp2 = 0;
-
- if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
- {
- /* Process Locked */
- __HAL_LOCK(hi2s);
-
- tmp1 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
- tmp2 = hi2s->Instance->I2SCFGR & SPI_I2SCFGR_I2SCFG;
- /* Check if the I2S_MODE_MASTER_TX or I2S_MODE_SLAVE_TX Mode is selected */
- if((tmp1 == I2S_MODE_MASTER_TX) || (tmp2 == I2S_MODE_SLAVE_TX))
- {
- if(hi2s->TxXferCount != 0)
- {
- if(__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_TXE) != RESET)
- {
- /* Transmit data */
- hi2s->Instance->DR = (*hi2s->pTxBuffPtr++);
- hi2s->TxXferCount--;
-
- if(hi2s->TxXferCount == 0)
- {
- /* Disable TXE interrupt */
- __HAL_I2S_DISABLE_IT(hi2s, I2S_IT_TXE);
- }
- }
- }
-
- if(hi2s->RxXferCount != 0)
- {
- if((I2SxEXT(hi2s->Instance)->SR & SPI_SR_RXNE) == SPI_SR_RXNE)
- {
- /* Receive data */
- (*hi2s->pRxBuffPtr++) = I2SxEXT(hi2s->Instance)->DR;
- hi2s->RxXferCount--;
-
- if(hi2s->RxXferCount == 0)
- {
- /* Disable I2Sext RXNE interrupt */
- I2SxEXT(hi2s->Instance)->CR2 &= ~I2S_IT_RXNE;
- }
- }
- }
- }
- /* The I2S_MODE_MASTER_RX or I2S_MODE_SLAVE_RX Mode is selected */
- else
- {
- if(hi2s->TxXferCount != 0)
- {
- if((I2SxEXT(hi2s->Instance)->SR & SPI_SR_TXE) == SPI_SR_TXE)
- {
- /* Transmit data */
- I2SxEXT(hi2s->Instance)->DR = (*hi2s->pTxBuffPtr++);
- hi2s->TxXferCount--;
-
- if(hi2s->TxXferCount == 0)
- {
- /* Disable I2Sext TXE interrupt */
- I2SxEXT(hi2s->Instance)->CR2 &= ~I2S_IT_TXE;
-
- HAL_I2S_TxCpltCallback(hi2s);
- }
- }
- }
- if(hi2s->RxXferCount != 0)
- {
- if(__HAL_I2S_GET_FLAG(hi2s, I2S_FLAG_RXNE) != RESET)
- {
- /* Receive data */
- (*hi2s->pRxBuffPtr++) = hi2s->Instance->DR;
- hi2s->RxXferCount--;
-
- if(hi2s->RxXferCount == 0)
- {
- /* Disable RXNE interrupt */
- __HAL_I2S_DISABLE_IT(hi2s, I2S_IT_RXNE);
-
- HAL_I2S_RxCpltCallback(hi2s);
- }
- }
- }
- }
-
- tmp1 = hi2s->RxXferCount;
- tmp2 = hi2s->TxXferCount;
- if((tmp1 == 0) && (tmp2 == 0))
- {
- /* Disable I2Sx ERR interrupt */
- __HAL_I2S_DISABLE_IT(hi2s, I2S_IT_ERR);
- /* Disable I2Sext ERR interrupt */
- I2SxEXT(hi2s->Instance)->CR2 &= ~I2S_IT_ERR;
-
- hi2s->State = HAL_I2S_STATE_READY;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hi2s);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-#endif /* STM32F40xxx/ STM32F41xxx/ STM32F42xxx/ STM32F43xxx/ STM32F401xx/ STM32F411xx */
-/**
- * @brief DMA I2S transmit process complete callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-void I2S_DMATxCplt(DMA_HandleTypeDef *hdma)
-{
- I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
- {
- hi2s->TxXferCount = 0;
-
- /* Disable Tx DMA Request */
- hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
- defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
- defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
- if(hi2s->Init.FullDuplexMode == I2S_FULLDUPLEXMODE_ENABLE)
- {
- /* Disable Rx DMA Request for the slave*/
- I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
- }
-#endif /* STM32F40xxx/ STM32F41xxx/ STM32F42xxx/ STM32F43xxx/ STM32F401xx/ STM32F411xx */
- if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
- {
- if(hi2s->RxXferCount == 0)
- {
- hi2s->State = HAL_I2S_STATE_READY;
- }
- }
- else
- {
- hi2s->State = HAL_I2S_STATE_READY;
- }
- }
- HAL_I2S_TxCpltCallback(hi2s);
-}
-
-/**
- * @brief DMA I2S receive process complete callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-void I2S_DMARxCplt(DMA_HandleTypeDef *hdma)
-{
- I2S_HandleTypeDef* hi2s = (I2S_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
- {
- /* Disable Rx DMA Request */
- hi2s->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
- defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
- defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
- if(hi2s->Init.FullDuplexMode == I2S_FULLDUPLEXMODE_ENABLE)
- {
- /* Disable Tx DMA Request for the slave*/
- I2SxEXT(hi2s->Instance)->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
- }
-#endif /* STM32F40xxx/ STM32F41xxx/ STM32F42xxx/ STM32F43xxx/ STM32F401xx/ STM32F411xx */
- hi2s->RxXferCount = 0;
- if(hi2s->State == HAL_I2S_STATE_BUSY_TX_RX)
- {
- if(hi2s->TxXferCount == 0)
- {
- hi2s->State = HAL_I2S_STATE_READY;
- }
- }
- else
- {
- hi2s->State = HAL_I2S_STATE_READY;
- }
- }
- HAL_I2S_RxCpltCallback(hi2s);
-}
-
-/**
- * @brief Get I2S clock Input based on Source clock selection in RCC
- * @param hi2s: pointer to a I2S_HandleTypeDef structure that contains
- * the configuration information for I2S module
- * @retval I2S Clock Input
- */
-uint32_t I2S_GetInputClock(I2S_HandleTypeDef *hi2s)
-{
- /* This variable used to store the VCO Input (value in Hz) */
- uint32_t vcoinput = 0;
- /* This variable used to store the VCO Output (value in Hz) */
- uint32_t vcooutput = 0;
- /* This variable used to store the I2S_CK_x (value in Hz) */
- uint32_t i2ssourceclock = 0;
-
- /* Configure SAI Clock based on SAI source clock selection */
-#if defined(STM32F446xx)
- switch(hi2s->Init.ClockSource)
- {
- case I2S_CLOCK_EXTERNAL :
- {
- /* Set the I2S clock to the external clock value */
- i2ssourceclock = EXTERNAL_CLOCK_VALUE;
- break;
- }
- case I2S_CLOCK_PLL :
- {
- /* Configure the PLLI2S division factor */
- /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */
- if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
- {
- /* Get the I2S source clock value */
- vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM));
- }
- else
- {
- /* Get the I2S source clock value */
- vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM));
- }
-
- /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
- vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6) & (RCC_PLLI2SCFGR_PLLI2SN >> 6)));
- /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */
- i2ssourceclock = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28) & (RCC_PLLI2SCFGR_PLLI2SR >> 28)));
- break;
- }
- case I2S_CLOCK_PLLR :
- {
- /* Configure the PLLI2S division factor */
- /* PLL_VCO Input = PLL_SOURCE/PLLM */
- if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
- {
- /* Get the I2S source clock value */
- vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
- }
- else
- {
- /* Get the I2S source clock value */
- vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
- }
-
- /* PLL_VCO Output = PLL_VCO Input * PLLN */
- vcooutput = (uint32_t)(vcoinput * (((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6) & (RCC_PLLCFGR_PLLN >> 6)));
- /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */
- i2ssourceclock = (uint32_t)(vcooutput /(((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28) & (RCC_PLLCFGR_PLLR >> 28)));
- break;
- }
- case I2S_CLOCK_PLLSRC :
- {
- /* Configure the PLLI2S division factor */
- /* PLL_VCO Input = PLL_SOURCE/PLLM */
- if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
- {
- /* Get the I2S source clock value */
- i2ssourceclock = (uint32_t)(HSE_VALUE);
- }
- else
- {
- /* Get the I2S source clock value */
- i2ssourceclock = (uint32_t)(HSI_VALUE);
- }
- break;
- }
- default :
- {
- break;
- }
- }
-#endif /* STM32F446xx */
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
- defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
- defined(STM32F401xC) || defined(STM32F401xE)
-
- /* If an external I2S clock has to be used, the specific define should be set
- in the project configuration or in the stm32f4xx_conf.h file */
- if(hi2s->Init.ClockSource == I2S_CLOCK_EXTERNAL)
- {
- /* Enable the External Clock selection */
- __HAL_RCC_I2S_CONFIG(RCC_I2SCLKSOURCE_EXT);
-
- /* Set the I2S clock to the external clock value */
- i2ssourceclock = EXTERNAL_CLOCK_VALUE;
- }
- else
- {
- /* Configure the PLLI2S division factor */
- /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */
- if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
- {
- /* Get the I2S source clock value */
- vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
- }
- else
- {
- /* Get the I2S source clock value */
- vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
- }
-
- /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
- vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6) & (RCC_PLLI2SCFGR_PLLI2SN >> 6)));
- /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */
- i2ssourceclock = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28) & (RCC_PLLI2SCFGR_PLLI2SR >> 28)));
- }
-#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx */
-
-#if defined(STM32F411xE)
-
- /* If an external I2S clock has to be used, the specific define should be set
- in the project configuration or in the stm32f4xx_conf.h file */
- if(hi2s->Init.ClockSource == I2S_CLOCK_EXTERNAL)
- {
- /* Enable the External Clock selection */
- __HAL_RCC_I2S_CONFIG(RCC_I2SCLKSOURCE_EXT);
-
- /* Set the I2S clock to the external clock value */
- i2ssourceclock = EXTERNAL_CLOCK_VALUE;
- }
- else
- {
- /* Configure the PLLI2S division factor */
- /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */
- if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSE)
- {
- /* Get the I2S source clock value */
- vcoinput = (uint32_t)(HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM));
- }
- else
- {
- /* Get the I2S source clock value */
- vcoinput = (uint32_t)(HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM));
- }
-
- /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
- vcooutput = (uint32_t)(vcoinput * (((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6) & (RCC_PLLI2SCFGR_PLLI2SN >> 6)));
- /* I2S_CLK = PLLI2S_VCO Output/PLLI2SR */
- i2ssourceclock = (uint32_t)(vcooutput /(((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> 28) & (RCC_PLLI2SCFGR_PLLI2SR >> 28)));
- }
-#endif /* STM32F411xE */
-
- /* the return result is the value of SAI clock */
- return i2ssourceclock;
-
-}
-/**
- * @}
- */
-
-#endif /* HAL_I2S_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_irda.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_irda.c
deleted file mode 100644
index c061ec8..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_irda.c
+++ /dev/null
@@ -1,1504 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_irda.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief IRDA HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the IrDA SIR ENDEC block (IrDA):
- * + Initialization and de-initialization methods
- * + IO operation methods
- * + Peripheral Control methods
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- The IRDA HAL driver can be used as follows:
-
- (#) Declare a IRDA_HandleTypeDef handle structure.
- (#) Initialize the IRDA low level resources by implementing the HAL_IRDA_MspInit() API:
- (##) Enable the USARTx interface clock.
- (##) IRDA pins configuration:
- (+++) Enable the clock for the IRDA GPIOs.
- (+++) Configure these IRDA pins as alternate function pull-up.
- (##) NVIC configuration if you need to use interrupt process (HAL_IRDA_Transmit_IT()
- and HAL_IRDA_Receive_IT() APIs):
- (+++) Configure the USARTx interrupt priority.
- (+++) Enable the NVIC USART IRQ handle.
- (##) DMA Configuration if you need to use DMA process (HAL_IRDA_Transmit_DMA()
- and HAL_IRDA_Receive_DMA() APIs):
- (+++) Declare a DMA handle structure for the Tx/Rx stream.
- (+++) Enable the DMAx interface clock.
- (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
- (+++) Configure the DMA Tx/Rx Stream.
- (+++) Associate the initialized DMA handle to the IRDA DMA Tx/Rx handle.
- (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx Stream.
-
- (#) Program the Baud Rate, Word Length, Parity, IrDA Mode, Prescaler
- and Mode(Receiver/Transmitter) in the hirda Init structure.
-
- (#) Initialize the IRDA registers by calling the HAL_IRDA_Init() API:
- (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
- by calling the customized HAL_IRDA_MspInit() API.
- -@@- The specific IRDA interrupts (Transmission complete interrupt,
- RXNE interrupt and Error Interrupts) will be managed using the macros
- __HAL_IRDA_ENABLE_IT() and __HAL_IRDA_DISABLE_IT() inside the transmit and receive process.
-
- (#) Three operation modes are available within this driver :
-
- *** Polling mode IO operation ***
- =================================
- [..]
- (+) Send an amount of data in blocking mode using HAL_IRDA_Transmit()
- (+) Receive an amount of data in blocking mode using HAL_IRDA_Receive()
-
- *** Interrupt mode IO operation ***
- ===================================
- [..]
- (+) Send an amount of data in non blocking mode using HAL_IRDA_Transmit_IT()
- (+) At transmission end of transfer HAL_IRDA_TxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_IRDA_TxCpltCallback
- (+) Receive an amount of data in non blocking mode using HAL_IRDA_Receive_IT()
- (+) At reception end of transfer HAL_IRDA_RxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_IRDA_RxCpltCallback
- (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_IRDA_ErrorCallback
-
- *** DMA mode IO operation ***
- =============================
- [..]
- (+) Send an amount of data in non blocking mode (DMA) using HAL_IRDA_Transmit_DMA()
- (+) At transmission end of transfer HAL_IRDA_TxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_IRDA_TxCpltCallback
- (+) Receive an amount of data in non blocking mode (DMA) using HAL_IRDA_Receive_DMA()
- (+) At reception end of transfer HAL_IRDA_RxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_IRDA_RxCpltCallback
- (+) In case of transfer Error, HAL_IRDA_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_IRDA_ErrorCallback
-
- *** IRDA HAL driver macros list ***
- ===================================
- [..]
- Below the list of most used macros in IRDA HAL driver.
-
- (+) __HAL_IRDA_ENABLE: Enable the IRDA peripheral
- (+) __HAL_IRDA_DISABLE: Disable the IRDA peripheral
- (+) __HAL_IRDA_GET_FLAG : Checks whether the specified IRDA flag is set or not
- (+) __HAL_IRDA_CLEAR_FLAG : Clears the specified IRDA pending flag
- (+) __HAL_IRDA_ENABLE_IT: Enables the specified IRDA interrupt
- (+) __HAL_IRDA_DISABLE_IT: Disables the specified IRDA interrupt
-
- (@) You can refer to the IRDA HAL driver header file for more useful macros
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup IRDA IRDA
- * @brief HAL IRDA module driver
- * @{
- */
-
-#ifdef HAL_IRDA_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @addtogroup IRDA_Private_Constants
- * @{
- */
-#define IRDA_TIMEOUT_VALUE 22000
-/**
- * @}
- */
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @addtogroup IRDA_Private_Functions
- * @{
- */
-static void IRDA_SetConfig (IRDA_HandleTypeDef *hirda);
-static HAL_StatusTypeDef IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda);
-static HAL_StatusTypeDef IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda);
-static HAL_StatusTypeDef IRDA_Receive_IT(IRDA_HandleTypeDef *hirda);
-static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma);
-static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma);
-static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
-static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma);
-static void IRDA_DMAError(DMA_HandleTypeDef *hdma);
-static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
-/**
- * @}
- */
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup IRDA_Exported_Functions IrDA Exported Functions
- * @{
- */
-
-/** @defgroup IRDA_Exported_Functions_Group1 IrDA Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
-
-===============================================================================
- ##### Initialization and Configuration functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to initialize the USARTx or the UARTy
- in IrDA mode.
- (+) For the asynchronous mode only these parameters can be configured:
- (++) BaudRate
- (++) WordLength
- (++) Parity: If the parity is enabled, then the MSB bit of the data written
- in the data register is transmitted but is changed by the parity bit.
- Depending on the frame length defined by the M bit (8-bits or 9-bits),
- please refer to Reference manual for possible IRDA frame formats.
- (++) Prescaler: A pulse of width less than two and greater than one PSC period(s) may or may
- not be rejected. The receiver set up time should be managed by software. The IrDA physical layer
- specification specifies a minimum of 10 ms delay between transmission and
- reception (IrDA is a half duplex protocol).
- (++) Mode: Receiver/transmitter modes
- (++) IrDAMode: the IrDA can operate in the Normal mode or in the Low power mode.
- [..]
- The HAL_IRDA_Init() API follows IRDA configuration procedures (details for the procedures
- are available in reference manual).
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the IRDA mode according to the specified
- * parameters in the IRDA_InitTypeDef and create the associated handle.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda)
-{
- /* Check the IRDA handle allocation */
- if(hirda == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the IRDA instance parameters */
- assert_param(IS_IRDA_INSTANCE(hirda->Instance));
- /* Check the IRDA mode parameter in the IRDA handle */
- assert_param(IS_IRDA_POWERMODE(hirda->Init.IrDAMode));
-
- if(hirda->State == HAL_IRDA_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hirda->Lock = HAL_UNLOCKED;
- /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
- HAL_IRDA_MspInit(hirda);
- }
-
- hirda->State = HAL_IRDA_STATE_BUSY;
-
- /* Disable the IRDA peripheral */
- __HAL_IRDA_DISABLE(hirda);
-
- /* Set the IRDA communication parameters */
- IRDA_SetConfig(hirda);
-
- /* In IrDA mode, the following bits must be kept cleared:
- - LINEN, STOP and CLKEN bits in the USART_CR2 register,
- - SCEN and HDSEL bits in the USART_CR3 register.*/
- hirda->Instance->CR2 &= ~(USART_CR2_LINEN | USART_CR2_STOP | USART_CR2_CLKEN);
- hirda->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL);
-
- /* Enable the IRDA peripheral */
- __HAL_IRDA_ENABLE(hirda);
-
- /* Set the prescaler */
- MODIFY_REG(hirda->Instance->GTPR, USART_GTPR_PSC, hirda->Init.Prescaler);
-
- /* Configure the IrDA mode */
- MODIFY_REG(hirda->Instance->CR3, USART_CR3_IRLP, hirda->Init.IrDAMode);
-
- /* Enable the IrDA mode by setting the IREN bit in the CR3 register */
- hirda->Instance->CR3 |= USART_CR3_IREN;
-
- /* Initialize the IRDA state*/
- hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
- hirda->State= HAL_IRDA_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the IRDA peripheral
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda)
-{
- /* Check the IRDA handle allocation */
- if(hirda == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_IRDA_INSTANCE(hirda->Instance));
-
- hirda->State = HAL_IRDA_STATE_BUSY;
-
- /* Disable the Peripheral */
- __HAL_IRDA_DISABLE(hirda);
-
- /* DeInit the low level hardware */
- HAL_IRDA_MspDeInit(hirda);
-
- hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
-
- hirda->State = HAL_IRDA_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hirda);
-
- return HAL_OK;
-}
-
-/**
- * @brief IRDA MSP Init.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @retval None
- */
- __weak void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_IRDA_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief IRDA MSP DeInit.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @retval None
- */
- __weak void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_IRDA_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup IRDA_Exported_Functions_Group2 IO operation functions
- * @brief IRDA Transmit/Receive functions
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
- This subsection provides a set of functions allowing to manage the IRDA data transfers.
- [..]
- IrDA is a half duplex communication protocol. If the Transmitter is busy, any data
- on the IrDA receive line will be ignored by the IrDA decoder and if the Receiver
- is busy, data on the TX from the USART to IrDA will not be encoded by IrDA.
- While receiving data, transmission should be avoided as the data to be transmitted
- could be corrupted.
-
- (#) There are two modes of transfer:
- (++) Blocking mode: The communication is performed in polling mode.
- The HAL status of all data processing is returned by the same function
- after finishing transfer.
- (++) No-Blocking mode: The communication is performed using Interrupts
- or DMA, These APIs return the HAL status.
- The end of the data processing will be indicated through the
- dedicated IRDA IRQ when using Interrupt mode or the DMA IRQ when
- using DMA mode.
- The HAL_IRDA_TxCpltCallback(), HAL_IRDA_RxCpltCallback() user callbacks
- will be executed respectively at the end of the transmit or Receive process
- The HAL_IRDA_ErrorCallback() user callback will be executed when a communication error is detected
-
- (#) Blocking mode API's are :
- (++) HAL_IRDA_Transmit()
- (++) HAL_IRDA_Receive()
-
- (#) Non Blocking mode APIs with Interrupt are :
- (++) HAL_IRDA_Transmit_IT()
- (++) HAL_IRDA_Receive_IT()
- (++) HAL_IRDA_IRQHandler()
-
- (#) Non Blocking mode functions with DMA are :
- (++) HAL_IRDA_Transmit_DMA()
- (++) HAL_IRDA_Receive_DMA()
-
- (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
- (++) HAL_IRDA_TxCpltCallback()
- (++) HAL_IRDA_RxCpltCallback()
- (++) HAL_IRDA_ErrorCallback()
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Sends an amount of data in blocking mode.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @param Timeout: Specify timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- uint16_t* tmp;
- uint32_t tmp1 = 0;
-
- tmp1 = hirda->State;
- if((tmp1 == HAL_IRDA_STATE_READY) || (tmp1 == HAL_IRDA_STATE_BUSY_RX))
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hirda);
-
- hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
- if(hirda->State == HAL_IRDA_STATE_BUSY_RX)
- {
- hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
- }
- else
- {
- hirda->State = HAL_IRDA_STATE_BUSY_TX;
- }
-
- hirda->TxXferSize = Size;
- hirda->TxXferCount = Size;
- while(hirda->TxXferCount > 0)
- {
- hirda->TxXferCount--;
- if(hirda->Init.WordLength == IRDA_WORDLENGTH_9B)
- {
- if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- tmp = (uint16_t*) pData;
- hirda->Instance->DR = (*tmp & (uint16_t)0x01FF);
- if(hirda->Init.Parity == IRDA_PARITY_NONE)
- {
- pData +=2;
- }
- else
- {
- pData +=1;
- }
- }
- else
- {
- if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- hirda->Instance->DR = (*pData++ & (uint8_t)0xFF);
- }
- }
-
- if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_TC, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
- {
- hirda->State = HAL_IRDA_STATE_BUSY_RX;
- }
- else
- {
- hirda->State = HAL_IRDA_STATE_READY;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hirda);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive an amount of data in blocking mode.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be received
- * @param Timeout: Specify timeout value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- uint16_t* tmp;
- uint32_t tmp1 = 0;
-
- tmp1 = hirda->State;
- if((tmp1 == HAL_IRDA_STATE_READY) || (tmp1 == HAL_IRDA_STATE_BUSY_TX))
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hirda);
-
- hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
- if(hirda->State == HAL_IRDA_STATE_BUSY_TX)
- {
- hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
- }
- else
- {
- hirda->State = HAL_IRDA_STATE_BUSY_RX;
- }
- hirda->RxXferSize = Size;
- hirda->RxXferCount = Size;
- /* Check the remain data to be received */
- while(hirda->RxXferCount > 0)
- {
- hirda->RxXferCount--;
- if(hirda->Init.WordLength == IRDA_WORDLENGTH_9B)
- {
- if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- tmp = (uint16_t*) pData ;
- if(hirda->Init.Parity == IRDA_PARITY_NONE)
- {
- *tmp = (uint16_t)(hirda->Instance->DR & (uint16_t)0x01FF);
- pData +=2;
- }
- else
- {
- *tmp = (uint16_t)(hirda->Instance->DR & (uint16_t)0x00FF);
- pData +=1;
- }
- }
- else
- {
- if(IRDA_WaitOnFlagUntilTimeout(hirda, IRDA_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- if(hirda->Init.Parity == IRDA_PARITY_NONE)
- {
- *pData++ = (uint8_t)(hirda->Instance->DR & (uint8_t)0x00FF);
- }
- else
- {
- *pData++ = (uint8_t)(hirda->Instance->DR & (uint8_t)0x007F);
- }
- }
- }
- if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
- {
- hirda->State = HAL_IRDA_STATE_BUSY_TX;
- }
- else
- {
- hirda->State = HAL_IRDA_STATE_READY;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hirda);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Send an amount of data in non blocking mode.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
-{
- uint32_t tmp1 = 0;
-
- tmp1 = hirda->State;
- if((tmp1 == HAL_IRDA_STATE_READY) || (tmp1 == HAL_IRDA_STATE_BUSY_RX))
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
- /* Process Locked */
- __HAL_LOCK(hirda);
-
- hirda->pTxBuffPtr = pData;
- hirda->TxXferSize = Size;
- hirda->TxXferCount = Size;
- hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
- if(hirda->State == HAL_IRDA_STATE_BUSY_RX)
- {
- hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
- }
- else
- {
- hirda->State = HAL_IRDA_STATE_BUSY_TX;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hirda);
-
- /* Enable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
- __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_ERR);
-
- /* Enable the IRDA Transmit Data Register Empty Interrupt */
- __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_TXE);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receives an amount of data in non blocking mode.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be received
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
-{
- uint32_t tmp1 = 0;
-
- tmp1 = hirda->State;
- if((tmp1 == HAL_IRDA_STATE_READY) || (tmp1 == HAL_IRDA_STATE_BUSY_TX))
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hirda);
-
- hirda->pRxBuffPtr = pData;
- hirda->RxXferSize = Size;
- hirda->RxXferCount = Size;
- hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
- if(hirda->State == HAL_IRDA_STATE_BUSY_TX)
- {
- hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
- }
- else
- {
- hirda->State = HAL_IRDA_STATE_BUSY_RX;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hirda);
-
- /* Enable the IRDA Data Register not empty Interrupt */
- __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_RXNE);
-
- /* Enable the IRDA Parity Error Interrupt */
- __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_PE);
-
- /* Enable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
- __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_ERR);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Sends an amount of data in non blocking mode.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
-{
- uint32_t *tmp;
- uint32_t tmp1 = 0;
-
- tmp1 = hirda->State;
- if((tmp1 == HAL_IRDA_STATE_READY) || (tmp1 == HAL_IRDA_STATE_BUSY_RX))
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hirda);
-
- hirda->pTxBuffPtr = pData;
- hirda->TxXferSize = Size;
- hirda->TxXferCount = Size;
- hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
-
- if(hirda->State == HAL_IRDA_STATE_BUSY_RX)
- {
- hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
- }
- else
- {
- hirda->State = HAL_IRDA_STATE_BUSY_TX;
- }
-
- /* Set the IRDA DMA transfer complete callback */
- hirda->hdmatx->XferCpltCallback = IRDA_DMATransmitCplt;
-
- /* Set the IRDA DMA half transfer complete callback */
- hirda->hdmatx->XferHalfCpltCallback = IRDA_DMATransmitHalfCplt;
-
- /* Set the DMA error callback */
- hirda->hdmatx->XferErrorCallback = IRDA_DMAError;
-
- /* Enable the IRDA transmit DMA Stream */
- tmp = (uint32_t*)&pData;
- HAL_DMA_Start_IT(hirda->hdmatx, *(uint32_t*)tmp, (uint32_t)&hirda->Instance->DR, Size);
-
- /* Clear the TC flag in the SR register by writing 0 to it */
- __HAL_IRDA_CLEAR_FLAG(hirda, IRDA_FLAG_TC);
-
- /* Enable the DMA transfer for transmit request by setting the DMAT bit
- in the USART CR3 register */
- hirda->Instance->CR3 |= USART_CR3_DMAT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hirda);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receives an amount of data in non blocking mode.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be received
- * @note When the IRDA parity is enabled (PCE = 1) the data received contain the parity bit.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size)
-{
- uint32_t *tmp;
- uint32_t tmp1 = 0;
-
- tmp1 = hirda->State;
- if((tmp1 == HAL_IRDA_STATE_READY) || (tmp1 == HAL_IRDA_STATE_BUSY_TX))
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hirda);
-
- hirda->pRxBuffPtr = pData;
- hirda->RxXferSize = Size;
- hirda->ErrorCode = HAL_IRDA_ERROR_NONE;
- if(hirda->State == HAL_IRDA_STATE_BUSY_TX)
- {
- hirda->State = HAL_IRDA_STATE_BUSY_TX_RX;
- }
- else
- {
- hirda->State = HAL_IRDA_STATE_BUSY_RX;
- }
-
- /* Set the IRDA DMA transfer complete callback */
- hirda->hdmarx->XferCpltCallback = IRDA_DMAReceiveCplt;
-
- /* Set the IRDA DMA half transfer complete callback */
- hirda->hdmarx->XferHalfCpltCallback = IRDA_DMAReceiveHalfCplt;
-
- /* Set the DMA error callback */
- hirda->hdmarx->XferErrorCallback = IRDA_DMAError;
-
- /* Enable the DMA Stream */
- tmp = (uint32_t*)&pData;
- HAL_DMA_Start_IT(hirda->hdmarx, (uint32_t)&hirda->Instance->DR, *(uint32_t*)tmp, Size);
-
- /* Enable the DMA transfer for the receiver request by setting the DMAR bit
- in the USART CR3 register */
- hirda->Instance->CR3 |= USART_CR3_DMAR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hirda);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Pauses the DMA Transfer.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda)
-{
- /* Process Locked */
- __HAL_LOCK(hirda);
-
- if(hirda->State == HAL_IRDA_STATE_BUSY_TX)
- {
- /* Disable the UART DMA Tx request */
- hirda->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
- }
- else if(hirda->State == HAL_IRDA_STATE_BUSY_RX)
- {
- /* Disable the UART DMA Rx request */
- hirda->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
- }
- else if (hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
- {
- /* Disable the UART DMA Tx & Rx requests */
- hirda->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
- hirda->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hirda);
-
- return HAL_ERROR;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hirda);
-
- return HAL_OK;
-}
-
-/**
- * @brief Resumes the DMA Transfer.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda)
-{
- /* Process Locked */
- __HAL_LOCK(hirda);
-
- if(hirda->State == HAL_IRDA_STATE_BUSY_TX)
- {
- /* Enable the UART DMA Tx request */
- hirda->Instance->CR3 |= USART_CR3_DMAT;
- }
- else if(hirda->State == HAL_IRDA_STATE_BUSY_RX)
- {
- /* Clear the Overrun flag before resuming the Rx transfer */
- __HAL_IRDA_CLEAR_OREFLAG(hirda);
- /* Enable the UART DMA Rx request */
- hirda->Instance->CR3 |= USART_CR3_DMAR;
- }
- else if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
- {
- /* Clear the Overrun flag before resuming the Rx transfer */
- __HAL_IRDA_CLEAR_OREFLAG(hirda);
- /* Enable the UART DMA Tx & Rx request */
- hirda->Instance->CR3 |= USART_CR3_DMAT;
- hirda->Instance->CR3 |= USART_CR3_DMAR;
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hirda);
-
- return HAL_ERROR;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hirda);
-
- return HAL_OK;
-}
-
-/**
- * @brief Stops the DMA Transfer.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda)
-{
- /* The Lock is not implemented on this API to allow the user application
- to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback():
- when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
- and the correspond call back is executed HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback()
- */
-
- /* Disable the UART Tx/Rx DMA requests */
- hirda->Instance->CR3 &= ~USART_CR3_DMAT;
- hirda->Instance->CR3 &= ~USART_CR3_DMAR;
-
- /* Abort the UART DMA tx Stream */
- if(hirda->hdmatx != NULL)
- {
- HAL_DMA_Abort(hirda->hdmatx);
- }
- /* Abort the UART DMA rx Stream */
- if(hirda->hdmarx != NULL)
- {
- HAL_DMA_Abort(hirda->hdmarx);
- }
-
- hirda->State = HAL_IRDA_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief This function handles IRDA interrupt request.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @retval None
- */
-void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda)
-{
- uint32_t tmp1 = 0, tmp2 =0;
-
- tmp1 = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_PE);
- tmp2 = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_PE);
- /* IRDA parity error interrupt occurred -------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- __HAL_IRDA_CLEAR_PEFLAG(hirda);
- hirda->ErrorCode |= HAL_IRDA_ERROR_PE;
- }
-
- tmp1 = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_FE);
- tmp2 = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_ERR);
- /* IRDA frame error interrupt occurred --------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- __HAL_IRDA_CLEAR_FEFLAG(hirda);
- hirda->ErrorCode |= HAL_IRDA_ERROR_FE;
- }
-
- tmp1 = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_NE);
- tmp2 = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_ERR);
- /* IRDA noise error interrupt occurred --------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- __HAL_IRDA_CLEAR_NEFLAG(hirda);
- hirda->ErrorCode |= HAL_IRDA_ERROR_NE;
- }
-
- tmp1 = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_ORE);
- tmp2 = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_ERR);
- /* IRDA Over-Run interrupt occurred -----------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- __HAL_IRDA_CLEAR_OREFLAG(hirda);
- hirda->ErrorCode |= HAL_IRDA_ERROR_ORE;
- }
-
- /* Call the Error call Back in case of Errors */
- if(hirda->ErrorCode != HAL_IRDA_ERROR_NONE)
- {
- /* Set the IRDA state ready to be able to start again the process */
- hirda->State = HAL_IRDA_STATE_READY;
- HAL_IRDA_ErrorCallback(hirda);
- }
-
- tmp1 = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_RXNE);
- tmp2 = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_RXNE);
- /* IRDA in mode Receiver ---------------------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- IRDA_Receive_IT(hirda);
- }
-
- tmp1 = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_TXE);
- tmp2 = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_TXE);
- /* IRDA in mode Transmitter ------------------------------------------------*/
- if((tmp1 != RESET) &&(tmp2 != RESET))
- {
- IRDA_Transmit_IT(hirda);
- }
-
- tmp1 = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_TC);
- tmp2 = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_TC);
- /* IRDA in mode Transmitter (transmission end) -----------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- IRDA_EndTransmit_IT(hirda);
- }
-}
-
-/**
- * @brief Tx Transfer complete callbacks.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @retval None
- */
- __weak void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_IRDA_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Tx Half Transfer completed callbacks.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval None
- */
- __weak void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_IRDA_TxHalfCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Transfer complete callbacks.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @retval None
- */
-__weak void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_IRDA_RxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Half Transfer complete callbacks.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @retval None
- */
-__weak void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_IRDA_RxHalfCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief IRDA error callbacks.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @retval None
- */
- __weak void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_IRDA_ErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup IRDA_Exported_Functions_Group3 Peripheral State and Errors functions
- * @brief IRDA State and Errors functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral State and Errors functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to return the State of IrDA
- communication process and also return Peripheral Errors occurred during communication process
- (+) HAL_IRDA_GetState() API can be helpful to check in run-time the state of the IrDA peripheral.
- (+) HAL_IRDA_GetError() check in run-time errors that could be occurred during communication.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Returns the IRDA state.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @retval HAL state
- */
-HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda)
-{
- return hirda->State;
-}
-
-/**
- * @brief Return the IARDA error code
- * @param hirda : pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA.
- * @retval IRDA Error Code
- */
-uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda)
-{
- return hirda->ErrorCode;
-}
-
-/**
- * @}
- */
-
-/**
- * @brief DMA IRDA transmit process complete callback.
- * @param hdma : DMA handle
- * @retval None
- */
-static void IRDA_DMATransmitCplt(DMA_HandleTypeDef *hdma)
-{
- IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- /* DMA Normal mode */
- if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
- {
- hirda->TxXferCount = 0;
-
- /* Disable the DMA transfer for transmit request by setting the DMAT bit
- in the IRDA CR3 register */
- hirda->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_DMAT);
-
- /* Enable the IRDA Transmit Complete Interrupt */
- __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_TC);
- }
- /* DMA Circular mode */
- else
- {
- HAL_IRDA_TxCpltCallback(hirda);
- }
-}
-
-/**
- * @brief DMA IRDA receive process half complete callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void IRDA_DMATransmitHalfCplt(DMA_HandleTypeDef *hdma)
-{
- IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- HAL_IRDA_TxHalfCpltCallback(hirda);
-}
-
-/**
- * @brief DMA IRDA receive process complete callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void IRDA_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
-{
- IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- /* DMA Normal mode */
- if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
- {
- hirda->RxXferCount = 0;
-
- /* Disable the DMA transfer for the receiver request by setting the DMAR bit
- in the IRDA CR3 register */
- hirda->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_DMAR);
-
- if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
- {
- hirda->State = HAL_IRDA_STATE_BUSY_TX;
- }
- else
- {
- hirda->State = HAL_IRDA_STATE_READY;
- }
- }
-
- HAL_IRDA_RxCpltCallback(hirda);
-}
-
-/**
- * @brief DMA IRDA receive process half complete callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void IRDA_DMAReceiveHalfCplt(DMA_HandleTypeDef *hdma)
-{
- IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- HAL_IRDA_RxHalfCpltCallback(hirda);
-}
-
-/**
- * @brief DMA IRDA communication error callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void IRDA_DMAError(DMA_HandleTypeDef *hdma)
-{
- IRDA_HandleTypeDef* hirda = ( IRDA_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- hirda->RxXferCount = 0;
- hirda->TxXferCount = 0;
- hirda->ErrorCode |= HAL_IRDA_ERROR_DMA;
- hirda->State= HAL_IRDA_STATE_READY;
-
- HAL_IRDA_ErrorCallback(hirda);
-}
-
-/**
- * @brief This function handles IRDA Communication Timeout.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @param Flag: specifies the IRDA flag to check.
- * @param Status: The new Flag status (SET or RESET).
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-static HAL_StatusTypeDef IRDA_WaitOnFlagUntilTimeout(IRDA_HandleTypeDef *hirda, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait until flag is set */
- if(Status == RESET)
- {
- while(__HAL_IRDA_GET_FLAG(hirda, Flag) == RESET)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
- __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TXE);
- __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_RXNE);
- __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_PE);
- __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR);
-
- hirda->State= HAL_IRDA_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hirda);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- else
- {
- while(__HAL_IRDA_GET_FLAG(hirda, Flag) != RESET)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
- __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TXE);
- __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_RXNE);
- __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_PE);
- __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR);
-
- hirda->State= HAL_IRDA_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hirda);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- return HAL_OK;
-}
-
- /**
- * @brief Send an amount of data in non blocking mode.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @retval HAL status
- */
-static HAL_StatusTypeDef IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda)
-{
- uint16_t* tmp;
- uint32_t tmp1 = 0;
-
- tmp1 = hirda->State;
- if((tmp1 == HAL_IRDA_STATE_BUSY_TX) || (tmp1 == HAL_IRDA_STATE_BUSY_TX_RX))
- {
- if(hirda->Init.WordLength == IRDA_WORDLENGTH_9B)
- {
- tmp = (uint16_t*) hirda->pTxBuffPtr;
- hirda->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF);
- if(hirda->Init.Parity == IRDA_PARITY_NONE)
- {
- hirda->pTxBuffPtr += 2;
- }
- else
- {
- hirda->pTxBuffPtr += 1;
- }
- }
- else
- {
- hirda->Instance->DR = (uint8_t)(*hirda->pTxBuffPtr++ & (uint8_t)0x00FF);
- }
-
- if(--hirda->TxXferCount == 0)
- {
- /* Disable the IRDA Transmit Data Register Empty Interrupt */
- __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TXE);
-
- /* Enable the IRDA Transmit Complete Interrupt */
- __HAL_IRDA_ENABLE_IT(hirda, IRDA_IT_TC);
- }
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Wraps up transmission in non blocking mode.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @retval HAL status
- */
-static HAL_StatusTypeDef IRDA_EndTransmit_IT(IRDA_HandleTypeDef *hirda)
-{
- /* Disable the IRDA Transmit Complete Interrupt */
- __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TC);
-
- /* Check if a receive process is ongoing or not */
- if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
- {
- hirda->State = HAL_IRDA_STATE_BUSY_RX;
- }
- else
- {
- /* Disable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
- __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR);
-
- hirda->State = HAL_IRDA_STATE_READY;
- }
-
- HAL_IRDA_TxCpltCallback(hirda);
-
- return HAL_OK;
-}
-
-/**
- * @brief Receives an amount of data in non blocking mode.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @retval HAL status
- */
-static HAL_StatusTypeDef IRDA_Receive_IT(IRDA_HandleTypeDef *hirda)
-{
- uint16_t* tmp;
- uint32_t tmp1 = 0;
-
- tmp1 = hirda->State;
- if((tmp1 == HAL_IRDA_STATE_BUSY_RX) || (tmp1 == HAL_IRDA_STATE_BUSY_TX_RX))
- {
- if(hirda->Init.WordLength == IRDA_WORDLENGTH_9B)
- {
- tmp = (uint16_t*) hirda->pRxBuffPtr;
- if(hirda->Init.Parity == IRDA_PARITY_NONE)
- {
- *tmp = (uint16_t)(hirda->Instance->DR & (uint16_t)0x01FF);
- hirda->pRxBuffPtr += 2;
- }
- else
- {
- *tmp = (uint16_t)(hirda->Instance->DR & (uint16_t)0x00FF);
- hirda->pRxBuffPtr += 1;
- }
- }
- else
- {
- if(hirda->Init.Parity == IRDA_PARITY_NONE)
- {
- *hirda->pRxBuffPtr++ = (uint8_t)(hirda->Instance->DR & (uint8_t)0x00FF);
- }
- else
- {
- *hirda->pRxBuffPtr++ = (uint8_t)(hirda->Instance->DR & (uint8_t)0x007F);
- }
- }
-
- if(--hirda->RxXferCount == 0)
- {
-
- __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_RXNE);
-
- if(hirda->State == HAL_IRDA_STATE_BUSY_TX_RX)
- {
- hirda->State = HAL_IRDA_STATE_BUSY_TX;
- }
- else
- {
- /* Disable the IRDA Parity Error Interrupt */
- __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_PE);
-
- /* Disable the IRDA Error Interrupt: (Frame error, noise error, overrun error) */
- __HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR);
-
- hirda->State = HAL_IRDA_STATE_READY;
- }
- HAL_IRDA_RxCpltCallback(hirda);
-
- return HAL_OK;
- }
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Configures the IRDA peripheral.
- * @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
- * the configuration information for the specified IRDA module.
- * @retval None
- */
-static void IRDA_SetConfig(IRDA_HandleTypeDef *hirda)
-{
- uint32_t tmpreg = 0x00;
-
- /* Check the parameters */
- assert_param(IS_IRDA_INSTANCE(hirda->Instance));
- assert_param(IS_IRDA_BAUDRATE(hirda->Init.BaudRate));
- assert_param(IS_IRDA_WORD_LENGTH(hirda->Init.WordLength));
- assert_param(IS_IRDA_PARITY(hirda->Init.Parity));
- assert_param(IS_IRDA_MODE(hirda->Init.Mode));
-
- /*-------------------------- IRDA CR2 Configuration ------------------------*/
- /* Clear STOP[13:12] bits */
- hirda->Instance->CR2 &= (uint32_t)~((uint32_t)USART_CR2_STOP);
-
- /*-------------------------- USART CR1 Configuration -----------------------*/
- tmpreg = hirda->Instance->CR1;
-
- /* Clear M, PCE, PS, TE and RE bits */
- tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \
- USART_CR1_RE));
-
- /* Configure the USART Word Length, Parity and mode:
- Set the M bits according to hirda->Init.WordLength value
- Set PCE and PS bits according to hirda->Init.Parity value
- Set TE and RE bits according to hirda->Init.Mode value */
- tmpreg |= (uint32_t)hirda->Init.WordLength | hirda->Init.Parity | hirda->Init.Mode;
-
- /* Write to USART CR1 */
- hirda->Instance->CR1 = (uint32_t)tmpreg;
-
- /*-------------------------- USART CR3 Configuration -----------------------*/
- /* Clear CTSE and RTSE bits */
- hirda->Instance->CR3 &= (uint32_t)~((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE));
-
- /*-------------------------- USART BRR Configuration -----------------------*/
- if((hirda->Instance == USART1) || (hirda->Instance == USART6))
- {
- hirda->Instance->BRR = IRDA_BRR(HAL_RCC_GetPCLK2Freq(), hirda->Init.BaudRate);
- }
- else
- {
- hirda->Instance->BRR = IRDA_BRR(HAL_RCC_GetPCLK1Freq(), hirda->Init.BaudRate);
- }
-}
-/**
- * @}
- */
-
-#endif /* HAL_IRDA_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_iwdg.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_iwdg.c
deleted file mode 100644
index 7e157f9..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_iwdg.c
+++ /dev/null
@@ -1,361 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_iwdg.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief IWDG HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Independent Watchdog (IWDG) peripheral:
- * + Initialization and Configuration functions
- * + IO operation functions
- * + Peripheral State functions
- *
- @verbatim
- ==============================================================================
- ##### IWDG Specific features #####
- ==============================================================================
- [..]
- (+) The IWDG can be started by either software or hardware (configurable
- through option byte).
-
- (+) The IWDG is clocked by its own dedicated Low-Speed clock (LSI) and
- thus stays active even if the main clock fails.
- Once the IWDG is started, the LSI is forced ON and cannot be disabled
- (LSI cannot be disabled too), and the counter starts counting down from
- the reset value of 0xFFF. When it reaches the end of count value (0x000)
- a system reset is generated.
-
- (+) The IWDG counter should be refreshed at regular intervals, otherwise the
- watchdog generates an MCU reset when the counter reaches 0.
-
- (+) The IWDG is implemented in the VDD voltage domain that is still functional
- in STOP and STANDBY mode (IWDG reset can wake-up from STANDBY).
- IWDGRST flag in RCC_CSR register can be used to inform when an IWDG
- reset occurs.
-
- (+) Min-max timeout value @32KHz (LSI): ~125us / ~32.7s
- The IWDG timeout may vary due to LSI frequency dispersion. STM32F4xx
- devices provide the capability to measure the LSI frequency (LSI clock
- connected internally to TIM5 CH4 input capture). The measured value
- can be used to have an IWDG timeout with an acceptable accuracy.
-
-
- ##### How to use this driver #####
- ==============================================================================
- [..]
- If Window option is disabled
- (+) Use IWDG using HAL_IWDG_Init() function to :
- (++) Enable write access to IWDG_PR, IWDG_RLR.
- (++) Configure the IWDG prescaler, counter reload value.
- This reload value will be loaded in the IWDG counter each time the counter
- is reloaded, then the IWDG will start counting down from this value.
- [..]
- (+) Use IWDG using HAL_IWDG_Start() function to:
- (++) Reload IWDG counter with value defined in the IWDG_RLR register.
- (++) Start the IWDG, when the IWDG is used in software mode (no need
- to enable the LSI, it will be enabled by hardware).
- (+) Then the application program must refresh the IWDG counter at regular
- intervals during normal operation to prevent an MCU reset, using
- HAL_IWDG_Refresh() function.
- [..]
- if Window option is enabled:
-
- (+) Use IWDG using HAL_IWDG_Start() function to enable IWDG downcounter
- (+) Use IWDG using HAL_IWDG_Init() function to :
- (++) Enable write access to IWDG_PR, IWDG_RLR and IWDG_WINR registers.
- (++) Configure the IWDG prescaler, reload value and window value.
- (+) Then the application program must refresh the IWDG counter at regular
- intervals during normal operation to prevent an MCU reset, using
- HAL_IWDG_Refresh() function.
-
- *** IWDG HAL driver macros list ***
- ====================================
- [..]
- Below the list of most used macros in IWDG HAL driver.
-
- (+) __HAL_IWDG_START: Enable the IWDG peripheral
- (+) __HAL_IWDG_RELOAD_COUNTER: Reloads IWDG counter with value defined in the reload register
- (+) __HAL_IWDG_GET_FLAG: Get the selected IWDG's flag status
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup IWDG IWDG
- * @brief IWDG HAL module driver.
- * @{
- */
-
-#ifdef HAL_IWDG_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
- /** @addtogroup IWDG_Private_Constants
- * @{
- */
-#define IWDG_TIMEOUT_FLAG ((uint32_t)1000) /* 1 s */
-/**
- * @}
- */
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup IWDG_Exported_Functions IWDG Exported Functions
- * @{
- */
-
-/** @defgroup IWDG_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions.
- *
-@verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Initialize the IWDG according to the specified parameters
- in the IWDG_InitTypeDef and create the associated handle
- (+) Initialize the IWDG MSP
- (+) DeInitialize IWDG MSP
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the IWDG according to the specified
- * parameters in the IWDG_InitTypeDef and creates the associated handle.
- * @param hiwdg: pointer to a IWDG_HandleTypeDef structure that contains
- * the configuration information for the specified IWDG module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg)
-{
- /* Check the IWDG handle allocation */
- if(hiwdg == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_IWDG_ALL_INSTANCE(hiwdg->Instance));
- assert_param(IS_IWDG_PRESCALER(hiwdg->Init.Prescaler));
- assert_param(IS_IWDG_RELOAD(hiwdg->Init.Reload));
-
- if(hiwdg->State == HAL_IWDG_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hiwdg->Lock = HAL_UNLOCKED;
- /* Init the low level hardware */
- HAL_IWDG_MspInit(hiwdg);
- }
-
- /* Change IWDG peripheral state */
- hiwdg->State = HAL_IWDG_STATE_BUSY;
-
- /* Enable write access to IWDG_PR and IWDG_RLR registers */
- IWDG_ENABLE_WRITE_ACCESS(hiwdg);
-
- /* Write to IWDG registers the IWDG_Prescaler & IWDG_Reload values to work with */
- MODIFY_REG(hiwdg->Instance->PR, IWDG_PR_PR, hiwdg->Init.Prescaler);
- MODIFY_REG(hiwdg->Instance->RLR, IWDG_RLR_RL, hiwdg->Init.Reload);
-
- /* Change IWDG peripheral state */
- hiwdg->State = HAL_IWDG_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the IWDG MSP.
- * @param hiwdg: pointer to a IWDG_HandleTypeDef structure that contains
- * the configuration information for the specified IWDG module.
- * @retval None
- */
-__weak void HAL_IWDG_MspInit(IWDG_HandleTypeDef *hiwdg)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_IWDG_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup IWDG_Exported_Functions_Group2 IO operation functions
- * @brief IO operation functions
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Start the IWDG.
- (+) Refresh the IWDG.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Starts the IWDG.
- * @param hiwdg: pointer to a IWDG_HandleTypeDef structure that contains
- * the configuration information for the specified IWDG module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_IWDG_Start(IWDG_HandleTypeDef *hiwdg)
-{
- /* Process Locked */
- __HAL_LOCK(hiwdg);
-
- /* Change IWDG peripheral state */
- hiwdg->State = HAL_IWDG_STATE_BUSY;
-
- /* Start the IWDG peripheral */
- __HAL_IWDG_START(hiwdg);
-
- /* Reload IWDG counter with value defined in the RLR register */
- __HAL_IWDG_RELOAD_COUNTER(hiwdg);
-
- /* Change IWDG peripheral state */
- hiwdg->State = HAL_IWDG_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hiwdg);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Refreshes the IWDG.
- * @param hiwdg: pointer to a IWDG_HandleTypeDef structure that contains
- * the configuration information for the specified IWDG module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg)
-{
- uint32_t tickstart = 0;
-
- /* Process Locked */
- __HAL_LOCK(hiwdg);
-
- /* Change IWDG peripheral state */
- hiwdg->State = HAL_IWDG_STATE_BUSY;
-
- tickstart = HAL_GetTick();
-
- /* Wait until RVU flag is RESET */
- while(__HAL_IWDG_GET_FLAG(hiwdg, IWDG_FLAG_RVU) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > IWDG_TIMEOUT_FLAG)
- {
- /* Set IWDG state */
- hiwdg->State = HAL_IWDG_STATE_TIMEOUT;
-
- /* Process unlocked */
- __HAL_UNLOCK(hiwdg);
-
- return HAL_TIMEOUT;
- }
- }
-
- /* Reload IWDG counter with value defined in the reload register */
- __HAL_IWDG_RELOAD_COUNTER(hiwdg);
-
- /* Change IWDG peripheral state */
- hiwdg->State = HAL_IWDG_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hiwdg);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup IWDG_Exported_Functions_Group3 Peripheral State functions
- * @brief Peripheral State functions.
- *
-@verbatim
- ===============================================================================
- ##### Peripheral State functions #####
- ===============================================================================
- [..]
- This subsection permits to get in run-time the status of the peripheral
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Returns the IWDG state.
- * @param hiwdg: pointer to a IWDG_HandleTypeDef structure that contains
- * the configuration information for the specified IWDG module.
- * @retval HAL state
- */
-HAL_IWDG_StateTypeDef HAL_IWDG_GetState(IWDG_HandleTypeDef *hiwdg)
-{
- return hiwdg->State;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_IWDG_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_ltdc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_ltdc.c
deleted file mode 100644
index eb69b1c..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_ltdc.c
+++ /dev/null
@@ -1,1191 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_ltdc.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief LTDC HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the LTDC peripheral:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral Control functions
- * + Peripheral State and Errors functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (#) Program the required configuration through the following parameters:
- the LTDC timing, the horizontal and vertical polarity,
- the pixel clock polarity, Data Enable polarity and the LTDC background color value
- using HAL_LTDC_Init() function
-
- (#) Program the required configuration through the following parameters:
- the pixel format, the blending factors, input alpha value, the window size
- and the image size using HAL_LTDC_ConfigLayer() function for foreground
- or/and background layer.
-
- (#) Optionally, configure and enable the CLUT using HAL_LTDC_ConfigCLUT() and
- HAL_LTDC_EnableCLUT functions.
-
- (#) Optionally, enable the Dither using HAL_LTDC_EnableDither().
-
- (#) Optionally, configure and enable the Color keying using HAL_LTDC_ConfigColorKeying()
- and HAL_LTDC_EnableColorKeying functions.
-
- (#) Optionally, configure LineInterrupt using HAL_LTDC_ProgramLineEvent()
- function
-
- (#) If needed, reconfigure and change the pixel format value, the alpha value
- value, the window size, the window position and the layer start address
- for foreground or/and background layer using respectively the following
- functions: HAL_LTDC_SetPixelFormat(), HAL_LTDC_SetAlpha(), HAL_LTDC_SetWindowSize(),
- HAL_LTDC_SetWindowPosition(), HAL_LTDC_SetAddress.
-
- (#) To control LTDC state you can use the following function: HAL_LTDC_GetState()
-
- *** LTDC HAL driver macros list ***
- =============================================
- [..]
- Below the list of most used macros in LTDC HAL driver.
-
- (+) __HAL_LTDC_ENABLE: Enable the LTDC.
- (+) __HAL_LTDC_DISABLE: Disable the LTDC.
- (+) __HAL_LTDC_LAYER_ENABLE: Enable the LTDC Layer.
- (+) __HAL_LTDC_LAYER_DISABLE: Disable the LTDC Layer.
- (+) __HAL_LTDC_RELOAD_CONFIG: Reload Layer Configuration.
- (+) __HAL_LTDC_GET_FLAG: Get the LTDC pending flags.
- (+) __HAL_LTDC_CLEAR_FLAG: Clear the LTDC pending flags.
- (+) __HAL_LTDC_ENABLE_IT: Enable the specified LTDC interrupts.
- (+) __HAL_LTDC_DISABLE_IT: Disable the specified LTDC interrupts.
- (+) __HAL_LTDC_GET_IT_SOURCE: Check whether the specified LTDC interrupt has occurred or not.
-
- [..]
- (@) You can refer to the LTDC HAL driver header file for more useful macros
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-/** @defgroup LTDC LTDC
- * @brief LTDC HAL module driver
- * @{
- */
-
-#ifdef HAL_LTDC_MODULE_ENABLED
-
-#if defined(STM32F429xx) || defined(STM32F439xx)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-static void LTDC_SetConfig(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx);
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup LTDC_Exported_Functions LTDC Exported Functions
- * @{
- */
-
-/** @defgroup LTDC_Exported_Functions_Group1 Initialization and Configuration functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and Configuration functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Initialize and configure the LTDC
- (+) De-initialize the LTDC
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the LTDC according to the specified
- * parameters in the LTDC_InitTypeDef and create the associated handle.
- * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc)
-{
- uint32_t tmp = 0, tmp1 = 0;
-
- /* Check the LTDC peripheral state */
- if(hltdc == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check function parameters */
- assert_param(IS_LTDC_ALL_INSTANCE(hltdc->Instance));
- assert_param(IS_LTDC_HSYNC(hltdc->Init.HorizontalSync));
- assert_param(IS_LTDC_VSYNC(hltdc->Init.VerticalSync));
- assert_param(IS_LTDC_AHBP(hltdc->Init.AccumulatedHBP));
- assert_param(IS_LTDC_AVBP(hltdc->Init.AccumulatedVBP));
- assert_param(IS_LTDC_AAH(hltdc->Init.AccumulatedActiveH));
- assert_param(IS_LTDC_AAW(hltdc->Init.AccumulatedActiveW));
- assert_param(IS_LTDC_TOTALH(hltdc->Init.TotalHeigh));
- assert_param(IS_LTDC_TOTALW(hltdc->Init.TotalWidth));
- assert_param(IS_LTDC_HSPOL(hltdc->Init.HSPolarity));
- assert_param(IS_LTDC_VSPOL(hltdc->Init.VSPolarity));
- assert_param(IS_LTDC_DEPOL(hltdc->Init.DEPolarity));
- assert_param(IS_LTDC_PCPOL(hltdc->Init.PCPolarity));
-
- if(hltdc->State == HAL_LTDC_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hltdc->Lock = HAL_UNLOCKED;
- /* Init the low level hardware */
- HAL_LTDC_MspInit(hltdc);
- }
-
- /* Change LTDC peripheral state */
- hltdc->State = HAL_LTDC_STATE_BUSY;
-
- /* Configures the HS, VS, DE and PC polarity */
- hltdc->Instance->GCR &= ~(LTDC_GCR_HSPOL | LTDC_GCR_VSPOL | LTDC_GCR_DEPOL | LTDC_GCR_PCPOL);
- hltdc->Instance->GCR |= (uint32_t)(hltdc->Init.HSPolarity | hltdc->Init.VSPolarity | \
- hltdc->Init.DEPolarity | hltdc->Init.PCPolarity);
-
- /* Sets Synchronization size */
- hltdc->Instance->SSCR &= ~(LTDC_SSCR_VSH | LTDC_SSCR_HSW);
- tmp = (hltdc->Init.HorizontalSync << 16);
- hltdc->Instance->SSCR |= (tmp | hltdc->Init.VerticalSync);
-
- /* Sets Accumulated Back porch */
- hltdc->Instance->BPCR &= ~(LTDC_BPCR_AVBP | LTDC_BPCR_AHBP);
- tmp = (hltdc->Init.AccumulatedHBP << 16);
- hltdc->Instance->BPCR |= (tmp | hltdc->Init.AccumulatedVBP);
-
- /* Sets Accumulated Active Width */
- hltdc->Instance->AWCR &= ~(LTDC_AWCR_AAH | LTDC_AWCR_AAW);
- tmp = (hltdc->Init.AccumulatedActiveW << 16);
- hltdc->Instance->AWCR |= (tmp | hltdc->Init.AccumulatedActiveH);
-
- /* Sets Total Width */
- hltdc->Instance->TWCR &= ~(LTDC_TWCR_TOTALH | LTDC_TWCR_TOTALW);
- tmp = (hltdc->Init.TotalWidth << 16);
- hltdc->Instance->TWCR |= (tmp | hltdc->Init.TotalHeigh);
-
- /* Sets the background color value */
- tmp = ((uint32_t)(hltdc->Init.Backcolor.Green) << 8);
- tmp1 = ((uint32_t)(hltdc->Init.Backcolor.Red) << 16);
- hltdc->Instance->BCCR &= ~(LTDC_BCCR_BCBLUE | LTDC_BCCR_BCGREEN | LTDC_BCCR_BCRED);
- hltdc->Instance->BCCR |= (tmp1 | tmp | hltdc->Init.Backcolor.Blue);
-
- /* Enable the transfer Error interrupt */
- __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_TE);
-
- /* Enable the FIFO underrun interrupt */
- __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_FU);
-
- /* Enable LTDC by setting LTDCEN bit */
- __HAL_LTDC_ENABLE(hltdc);
-
- /* Initialize the error code */
- hltdc->ErrorCode = HAL_LTDC_ERROR_NONE;
-
- /* Initialize the LTDC state*/
- hltdc->State = HAL_LTDC_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Deinitializes the LTDC peripheral registers to their default reset
- * values.
- * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @retval None
- */
-
-HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc)
-{
- /* DeInit the low level hardware */
- HAL_LTDC_MspDeInit(hltdc);
-
- /* Initialize the error code */
- hltdc->ErrorCode = HAL_LTDC_ERROR_NONE;
-
- /* Initialize the LTDC state*/
- hltdc->State = HAL_LTDC_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hltdc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the LTDC MSP.
- * @param hltdc : pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @retval None
- */
-__weak void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_LTDC_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes the LTDC MSP.
- * @param hltdc : pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @retval None
- */
-__weak void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_LTDC_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup LTDC_Exported_Functions_Group2 IO operation functions
- * @brief IO operation functions
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
- [..] This section provides function allowing to:
- (+) Handle LTDC interrupt request
-
-@endverbatim
- * @{
- */
-/**
- * @brief Handles LTDC interrupt request.
- * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @retval HAL status
- */
-void HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc)
-{
- /* Transfer Error Interrupt management ***************************************/
- if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_TE) != RESET)
- {
- if(__HAL_LTDC_GET_IT_SOURCE(hltdc, LTDC_IT_TE) != RESET)
- {
- /* Disable the transfer Error interrupt */
- __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_TE);
-
- /* Clear the transfer error flag */
- __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_TE);
-
- /* Update error code */
- hltdc->ErrorCode |= HAL_LTDC_ERROR_TE;
-
- /* Change LTDC state */
- hltdc->State = HAL_LTDC_STATE_ERROR;
-
- /* Process unlocked */
- __HAL_UNLOCK(hltdc);
-
- /* Transfer error Callback */
- HAL_LTDC_ErrorCallback(hltdc);
- }
- }
- /* FIFO underrun Interrupt management ***************************************/
- if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_FU) != RESET)
- {
- if(__HAL_LTDC_GET_IT_SOURCE(hltdc, LTDC_IT_FU) != RESET)
- {
- /* Disable the FIFO underrun interrupt */
- __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_FU);
-
- /* Clear the FIFO underrun flag */
- __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_FU);
-
- /* Update error code */
- hltdc->ErrorCode |= HAL_LTDC_ERROR_FU;
-
- /* Change LTDC state */
- hltdc->State = HAL_LTDC_STATE_ERROR;
-
- /* Process unlocked */
- __HAL_UNLOCK(hltdc);
-
- /* Transfer error Callback */
- HAL_LTDC_ErrorCallback(hltdc);
- }
- }
- /* Line Interrupt management ************************************************/
- if(__HAL_LTDC_GET_FLAG(hltdc, LTDC_FLAG_LI) != RESET)
- {
- if(__HAL_LTDC_GET_IT_SOURCE(hltdc, LTDC_IT_LI) != RESET)
- {
- /* Disable the Line interrupt */
- __HAL_LTDC_DISABLE_IT(hltdc, LTDC_IT_LI);
-
- /* Clear the Line interrupt flag */
- __HAL_LTDC_CLEAR_FLAG(hltdc, LTDC_FLAG_LI);
-
- /* Change LTDC state */
- hltdc->State = HAL_LTDC_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hltdc);
-
- /* Line interrupt Callback */
- HAL_LTDC_LineEvenCallback(hltdc);
- }
- }
-}
-
-/**
- * @brief Error LTDC callback.
- * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @retval None
- */
-__weak void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_LTDC_ErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Line Event callback.
- * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @retval None
- */
-__weak void HAL_LTDC_LineEvenCallback(LTDC_HandleTypeDef *hltdc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_LTDC_LineEvenCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup LTDC_Exported_Functions_Group3 Peripheral Control functions
- * @brief Peripheral Control functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Control functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Configure the LTDC foreground or/and background parameters.
- (+) Set the active layer.
- (+) Configure the color keying.
- (+) Configure the C-LUT.
- (+) Enable / Disable the color keying.
- (+) Enable / Disable the C-LUT.
- (+) Update the layer position.
- (+) Update the layer size.
- (+) Update pixel format on the fly.
- (+) Update transparency on the fly.
- (+) Update address on the fly.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Configure the LTDC Layer according to the specified
- * parameters in the LTDC_InitTypeDef and create the associated handle.
- * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @param pLayerCfg: pointer to a LTDC_LayerCfgTypeDef structure that contains
- * the configuration information for the Layer.
- * @param LayerIdx: LTDC Layer index.
- * This parameter can be one of the following values:
- * 0 or 1
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx)
-{
- /* Process locked */
- __HAL_LOCK(hltdc);
-
- /* Change LTDC peripheral state */
- hltdc->State = HAL_LTDC_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_LTDC_LAYER(LayerIdx));
- assert_param(IS_LTDC_PIXEL_FORMAT(pLayerCfg->PixelFormat));
- assert_param(IS_LTDC_BLENDING_FACTOR1(pLayerCfg->BlendingFactor1));
- assert_param(IS_LTDC_BLENDING_FACTOR2(pLayerCfg->BlendingFactor2));
- assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0));
- assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1));
- assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0));
- assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1));
- assert_param(IS_LTDC_ALPHA(pLayerCfg->Alpha0));
- assert_param(IS_LTDC_CFBLL(pLayerCfg->ImageWidth));
- assert_param(IS_LTDC_CFBLNBR(pLayerCfg->ImageHeight));
-
- /* Copy new layer configuration into handle structure */
- hltdc->LayerCfg[LayerIdx] = *pLayerCfg;
-
- /* Configure the LTDC Layer */
- LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
-
- /* Sets the Reload type */
- hltdc->Instance->SRCR = LTDC_SRCR_IMR;
-
- /* Initialize the LTDC state*/
- hltdc->State = HAL_LTDC_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hltdc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Configure the color keying.
- * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @param RGBValue: the color key value
- * @param LayerIdx: LTDC Layer index.
- * This parameter can be one of the following values:
- * 0 or 1
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx)
-{
- /* Process locked */
- __HAL_LOCK(hltdc);
-
- /* Change LTDC peripheral state */
- hltdc->State = HAL_LTDC_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_LTDC_LAYER(LayerIdx));
-
- /* Configures the default color values */
- LTDC_LAYER(hltdc, LayerIdx)->CKCR &= ~(LTDC_LxCKCR_CKBLUE | LTDC_LxCKCR_CKGREEN | LTDC_LxCKCR_CKRED);
- LTDC_LAYER(hltdc, LayerIdx)->CKCR = RGBValue;
-
- /* Sets the Reload type */
- hltdc->Instance->SRCR = LTDC_SRCR_IMR;
-
- /* Change the LTDC state*/
- hltdc->State = HAL_LTDC_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hltdc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Load the color lookup table.
- * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @param pCLUT: pointer to the color lookup table address.
- * @param CLUTSize: the color lookup table size.
- * @param LayerIdx: LTDC Layer index.
- * This parameter can be one of the following values:
- * 0 or 1
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, uint32_t *pCLUT, uint32_t CLUTSize, uint32_t LayerIdx)
-{
- uint32_t tmp = 0;
- uint32_t counter = 0;
- uint32_t pcounter = 0;
-
- /* Process locked */
- __HAL_LOCK(hltdc);
-
- /* Change LTDC peripheral state */
- hltdc->State = HAL_LTDC_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_LTDC_LAYER(LayerIdx));
-
- for(counter = 0; (counter < CLUTSize); counter++)
- {
- if(hltdc->LayerCfg[LayerIdx].PixelFormat == LTDC_PIXEL_FORMAT_AL44)
- {
- tmp = (((counter + 16*counter) << 24) | ((uint32_t)(*pCLUT) & 0xFF) | ((uint32_t)(*pCLUT) & 0xFF00) | ((uint32_t)(*pCLUT) & 0xFF0000));
- }
- else
- {
- tmp = ((counter << 24) | ((uint32_t)(*pCLUT) & 0xFF) | ((uint32_t)(*pCLUT) & 0xFF00) | ((uint32_t)(*pCLUT) & 0xFF0000));
- }
- pcounter = (uint32_t)pCLUT + sizeof(*pCLUT);
- pCLUT = (uint32_t *)pcounter;
-
- /* Specifies the C-LUT address and RGB value */
- LTDC_LAYER(hltdc, LayerIdx)->CLUTWR = tmp;
- }
-
- /* Change the LTDC state*/
- hltdc->State = HAL_LTDC_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hltdc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Enable the color keying.
- * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @param LayerIdx: LTDC Layer index.
- * This parameter can be one of the following values:
- * 0 or 1
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
-{
- /* Process locked */
- __HAL_LOCK(hltdc);
-
- /* Change LTDC peripheral state */
- hltdc->State = HAL_LTDC_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_LTDC_LAYER(LayerIdx));
-
- /* Enable LTDC color keying by setting COLKEN bit */
- LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_COLKEN;
-
- /* Sets the Reload type */
- hltdc->Instance->SRCR = LTDC_SRCR_IMR;
-
- /* Change the LTDC state*/
- hltdc->State = HAL_LTDC_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hltdc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Disable the color keying.
- * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @param LayerIdx: LTDC Layer index.
- * This parameter can be one of the following values:
- * 0 or 1
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
-{
- /* Process locked */
- __HAL_LOCK(hltdc);
-
- /* Change LTDC peripheral state */
- hltdc->State = HAL_LTDC_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_LTDC_LAYER(LayerIdx));
-
- /* Disable LTDC color keying by setting COLKEN bit */
- LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_COLKEN;
-
- /* Sets the Reload type */
- hltdc->Instance->SRCR = LTDC_SRCR_IMR;
-
- /* Change the LTDC state*/
- hltdc->State = HAL_LTDC_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hltdc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Enable the color lookup table.
- * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @param LayerIdx: LTDC Layer index.
- * This parameter can be one of the following values:
- * 0 or 1
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
-{
-
- /* Process locked */
- __HAL_LOCK(hltdc);
-
- /* Change LTDC peripheral state */
- hltdc->State = HAL_LTDC_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_LTDC_LAYER(LayerIdx));
-
- /* Disable LTDC color lookup table by setting CLUTEN bit */
- LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_CLUTEN;
-
- /* Sets the Reload type */
- hltdc->Instance->SRCR = LTDC_SRCR_IMR;
-
- /* Change the LTDC state*/
- hltdc->State = HAL_LTDC_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hltdc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Disable the color lookup table.
- * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @param LayerIdx: LTDC Layer index.
- * This parameter can be one of the following values:
- * 0 or 1
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx)
-{
-
- /* Process locked */
- __HAL_LOCK(hltdc);
-
- /* Change LTDC peripheral state */
- hltdc->State = HAL_LTDC_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_LTDC_LAYER(LayerIdx));
-
- /* Disable LTDC color lookup table by setting CLUTEN bit */
- LTDC_LAYER(hltdc, LayerIdx)->CR &= ~(uint32_t)LTDC_LxCR_CLUTEN;
-
- /* Sets the Reload type */
- hltdc->Instance->SRCR = LTDC_SRCR_IMR;
-
- /* Change the LTDC state*/
- hltdc->State = HAL_LTDC_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hltdc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Enables Dither.
- * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @retval HAL status
- */
-
-HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc)
-{
- /* Process locked */
- __HAL_LOCK(hltdc);
-
- /* Change LTDC peripheral state */
- hltdc->State = HAL_LTDC_STATE_BUSY;
-
- /* Enable Dither by setting DTEN bit */
- LTDC->GCR |= (uint32_t)LTDC_GCR_DTEN;
-
- /* Change the LTDC state*/
- hltdc->State = HAL_LTDC_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hltdc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Disables Dither.
- * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @retval HAL status
- */
-
-HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc)
-{
- /* Process locked */
- __HAL_LOCK(hltdc);
-
- /* Change LTDC peripheral state */
- hltdc->State = HAL_LTDC_STATE_BUSY;
-
- /* Disable Dither by setting DTEN bit */
- LTDC->GCR &= ~(uint32_t)LTDC_GCR_DTEN;
-
- /* Change the LTDC state*/
- hltdc->State = HAL_LTDC_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hltdc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Set the LTDC window size.
- * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @param XSize: LTDC Pixel per line
- * @param YSize: LTDC Line number
- * @param LayerIdx: LTDC Layer index.
- * This parameter can be one of the following values:
- * 0 or 1
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx)
-{
- LTDC_LayerCfgTypeDef *pLayerCfg;
-
- /* Process locked */
- __HAL_LOCK(hltdc);
-
- /* Change LTDC peripheral state */
- hltdc->State = HAL_LTDC_STATE_BUSY;
-
- /* Get layer configuration from handle structure */
- pLayerCfg = &hltdc->LayerCfg[LayerIdx];
-
- /* Check the parameters (Layers parameters)*/
- assert_param(IS_LTDC_LAYER(LayerIdx));
- assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0));
- assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1));
- assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0));
- assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1));
- assert_param(IS_LTDC_CFBLL(XSize));
- assert_param(IS_LTDC_CFBLNBR(YSize));
-
- /* update horizontal start/stop */
- pLayerCfg->WindowX0 = 0;
- pLayerCfg->WindowX1 = XSize + pLayerCfg->WindowX0;
-
- /* update vertical start/stop */
- pLayerCfg->WindowY0 = 0;
- pLayerCfg->WindowY1 = YSize + pLayerCfg->WindowY0;
-
- /* Reconfigures the color frame buffer pitch in byte */
- pLayerCfg->ImageWidth = XSize;
-
- /* Reconfigures the frame buffer line number */
- pLayerCfg->ImageHeight = YSize;
-
- /* Set LTDC parameters */
- LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
-
- /* Sets the Reload type */
- hltdc->Instance->SRCR = LTDC_SRCR_IMR;
-
- /* Change the LTDC state*/
- hltdc->State = HAL_LTDC_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hltdc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Set the LTDC window position.
- * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @param X0: LTDC window X offset
- * @param Y0: LTDC window Y offset
- * @param LayerIdx: LTDC Layer index.
- * This parameter can be one of the following values:
- * 0 or 1
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx)
-{
- LTDC_LayerCfgTypeDef *pLayerCfg;
-
- /* Process locked */
- __HAL_LOCK(hltdc);
-
- /* Change LTDC peripheral state */
- hltdc->State = HAL_LTDC_STATE_BUSY;
-
- /* Get layer configuration from handle structure */
- pLayerCfg = &hltdc->LayerCfg[LayerIdx];
-
- /* Check the parameters */
- assert_param(IS_LTDC_LAYER(LayerIdx));
- assert_param(IS_LTDC_HCONFIGST(pLayerCfg->WindowX0));
- assert_param(IS_LTDC_HCONFIGSP(pLayerCfg->WindowX1));
- assert_param(IS_LTDC_VCONFIGST(pLayerCfg->WindowY0));
- assert_param(IS_LTDC_VCONFIGSP(pLayerCfg->WindowY1));
-
- /* update horizontal start/stop */
- pLayerCfg->WindowX0 = X0;
- pLayerCfg->WindowX1 = X0 + pLayerCfg->ImageWidth;
-
- /* update vertical start/stop */
- pLayerCfg->WindowY0 = Y0;
- pLayerCfg->WindowY1 = Y0 + pLayerCfg->ImageHeight;
-
- /* Set LTDC parameters */
- LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
-
- /* Sets the Reload type */
- hltdc->Instance->SRCR = LTDC_SRCR_IMR;
-
- /* Change the LTDC state*/
- hltdc->State = HAL_LTDC_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hltdc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Reconfigure the pixel format.
- * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @param Pixelformat: new pixel format value.
- * @param LayerIdx: LTDC Layer index.
- * This parameter can be one of the following values:
- * 0 or 1.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx)
-{
- LTDC_LayerCfgTypeDef *pLayerCfg;
-
- /* Process locked */
- __HAL_LOCK(hltdc);
-
- /* Change LTDC peripheral state */
- hltdc->State = HAL_LTDC_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_LTDC_LAYER(LayerIdx));
- assert_param(IS_LTDC_PIXEL_FORMAT(Pixelformat));
-
- /* Get layer configuration from handle structure */
- pLayerCfg = &hltdc->LayerCfg[LayerIdx];
-
- /* Reconfigure the pixel format */
- pLayerCfg->PixelFormat = Pixelformat;
-
- /* Set LTDC parameters */
- LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
-
- /* Sets the Reload type */
- hltdc->Instance->SRCR = LTDC_SRCR_IMR;
-
- /* Change the LTDC state*/
- hltdc->State = HAL_LTDC_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hltdc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Reconfigure the layer alpha value.
- * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @param Alpha: new alpha value.
- * @param LayerIdx: LTDC Layer index.
- * This parameter can be one of the following values:
- * 0 or 1
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx)
-{
- LTDC_LayerCfgTypeDef *pLayerCfg;
-
- /* Process locked */
- __HAL_LOCK(hltdc);
-
- /* Change LTDC peripheral state */
- hltdc->State = HAL_LTDC_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_LTDC_ALPHA(Alpha));
- assert_param(IS_LTDC_LAYER(LayerIdx));
-
- /* Get layer configuration from handle structure */
- pLayerCfg = &hltdc->LayerCfg[LayerIdx];
-
- /* Reconfigure the Alpha value */
- pLayerCfg->Alpha = Alpha;
-
- /* Set LTDC parameters */
- LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
-
- /* Sets the Reload type */
- hltdc->Instance->SRCR = LTDC_SRCR_IMR;
-
- /* Change the LTDC state*/
- hltdc->State = HAL_LTDC_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hltdc);
-
- return HAL_OK;
-}
-/**
- * @brief Reconfigure the frame buffer Address.
- * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @param Address: new address value.
- * @param LayerIdx: LTDC Layer index.
- * This parameter can be one of the following values:
- * 0 or 1.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx)
-{
- LTDC_LayerCfgTypeDef *pLayerCfg;
-
- /* Process locked */
- __HAL_LOCK(hltdc);
-
- /* Change LTDC peripheral state */
- hltdc->State = HAL_LTDC_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_LTDC_LAYER(LayerIdx));
-
- /* Get layer configuration from handle structure */
- pLayerCfg = &hltdc->LayerCfg[LayerIdx];
-
- /* Reconfigure the Address */
- pLayerCfg->FBStartAdress = Address;
-
- /* Set LTDC parameters */
- LTDC_SetConfig(hltdc, pLayerCfg, LayerIdx);
-
- /* Sets the Reload type */
- hltdc->Instance->SRCR = LTDC_SRCR_IMR;
-
- /* Change the LTDC state*/
- hltdc->State = HAL_LTDC_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hltdc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Define the position of the line interrupt .
- * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @param Line: Line Interrupt Position.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line)
-{
- /* Process locked */
- __HAL_LOCK(hltdc);
-
- /* Change LTDC peripheral state */
- hltdc->State = HAL_LTDC_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_LTDC_LIPOS(Line));
-
- /* Enable the Line interrupt */
- __HAL_LTDC_ENABLE_IT(hltdc, LTDC_IT_LI);
-
- /* Sets the Line Interrupt position */
- LTDC->LIPCR = (uint32_t)Line;
-
- /* Change the LTDC state*/
- hltdc->State = HAL_LTDC_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hltdc);
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup LTDC_Exported_Functions_Group4 Peripheral State and Errors functions
- * @brief Peripheral State and Errors functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral State and Errors functions #####
- ===============================================================================
- [..]
- This subsection provides functions allowing to
- (+) Check the LTDC state.
- (+) Get error code.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Return the LTDC state
- * @param hltdc: pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @retval HAL state
- */
-HAL_LTDC_StateTypeDef HAL_LTDC_GetState(LTDC_HandleTypeDef *hltdc)
-{
- return hltdc->State;
-}
-
-/**
-* @brief Return the LTDC error code
-* @param hltdc : pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
-* @retval LTDC Error Code
-*/
-uint32_t HAL_LTDC_GetError(LTDC_HandleTypeDef *hltdc)
-{
- return hltdc->ErrorCode;
-}
-
-/**
- * @}
- */
-
-/**
- * @brief Configures the LTDC peripheral
- * @param hltdc : Pointer to a LTDC_HandleTypeDef structure that contains
- * the configuration information for the LTDC.
- * @param pLayerCfg: Pointer LTDC Layer Configuration structure
- * @param LayerIdx: LTDC Layer index.
- * This parameter can be one of the following values: 0 or 1
- * @retval None
- */
-static void LTDC_SetConfig(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx)
-{
- uint32_t tmp = 0;
- uint32_t tmp1 = 0;
- uint32_t tmp2 = 0;
-
- /* Configures the horizontal start and stop position */
- tmp = ((pLayerCfg->WindowX1 + ((hltdc->Instance->BPCR & LTDC_BPCR_AHBP) >> 16)) << 16);
- LTDC_LAYER(hltdc, LayerIdx)->WHPCR &= ~(LTDC_LxWHPCR_WHSTPOS | LTDC_LxWHPCR_WHSPPOS);
- LTDC_LAYER(hltdc, LayerIdx)->WHPCR = ((pLayerCfg->WindowX0 + ((hltdc->Instance->BPCR & LTDC_BPCR_AHBP) >> 16) + 1) | tmp);
-
- /* Configures the vertical start and stop position */
- tmp = ((pLayerCfg->WindowY1 + (hltdc->Instance->BPCR & LTDC_BPCR_AVBP)) << 16);
- LTDC_LAYER(hltdc, LayerIdx)->WVPCR &= ~(LTDC_LxWVPCR_WVSTPOS | LTDC_LxWVPCR_WVSPPOS);
- LTDC_LAYER(hltdc, LayerIdx)->WVPCR = ((pLayerCfg->WindowY0 + (hltdc->Instance->BPCR & LTDC_BPCR_AVBP) + 1) | tmp);
-
- /* Specifies the pixel format */
- LTDC_LAYER(hltdc, LayerIdx)->PFCR &= ~(LTDC_LxPFCR_PF);
- LTDC_LAYER(hltdc, LayerIdx)->PFCR = (pLayerCfg->PixelFormat);
-
- /* Configures the default color values */
- tmp = ((uint32_t)(pLayerCfg->Backcolor.Green) << 8);
- tmp1 = ((uint32_t)(pLayerCfg->Backcolor.Red) << 16);
- tmp2 = (pLayerCfg->Alpha0 << 24);
- LTDC_LAYER(hltdc, LayerIdx)->DCCR &= ~(LTDC_LxDCCR_DCBLUE | LTDC_LxDCCR_DCGREEN | LTDC_LxDCCR_DCRED | LTDC_LxDCCR_DCALPHA);
- LTDC_LAYER(hltdc, LayerIdx)->DCCR = (pLayerCfg->Backcolor.Blue | tmp | tmp1 | tmp2);
-
- /* Specifies the constant alpha value */
- LTDC_LAYER(hltdc, LayerIdx)->CACR &= ~(LTDC_LxCACR_CONSTA);
- LTDC_LAYER(hltdc, LayerIdx)->CACR = (pLayerCfg->Alpha);
-
- /* Specifies the blending factors */
- LTDC_LAYER(hltdc, LayerIdx)->BFCR &= ~(LTDC_LxBFCR_BF2 | LTDC_LxBFCR_BF1);
- LTDC_LAYER(hltdc, LayerIdx)->BFCR = (pLayerCfg->BlendingFactor1 | pLayerCfg->BlendingFactor2);
-
- /* Configures the color frame buffer start address */
- LTDC_LAYER(hltdc, LayerIdx)->CFBAR &= ~(LTDC_LxCFBAR_CFBADD);
- LTDC_LAYER(hltdc, LayerIdx)->CFBAR = (pLayerCfg->FBStartAdress);
-
- if(pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB8888)
- {
- tmp = 4;
- }
- else if (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_RGB888)
- {
- tmp = 3;
- }
- else if((pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB4444) || \
- (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_RGB565) || \
- (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_ARGB1555) || \
- (pLayerCfg->PixelFormat == LTDC_PIXEL_FORMAT_AL88))
- {
- tmp = 2;
- }
- else
- {
- tmp = 1;
- }
-
- /* Configures the color frame buffer pitch in byte */
- LTDC_LAYER(hltdc, LayerIdx)->CFBLR &= ~(LTDC_LxCFBLR_CFBLL | LTDC_LxCFBLR_CFBP);
- LTDC_LAYER(hltdc, LayerIdx)->CFBLR = (((pLayerCfg->ImageWidth * tmp) << 16) | (((pLayerCfg->WindowX1 - pLayerCfg->WindowX0) * tmp) + 3));
-
- /* Configures the frame buffer line number */
- LTDC_LAYER(hltdc, LayerIdx)->CFBLNR &= ~(LTDC_LxCFBLNR_CFBLNBR);
- LTDC_LAYER(hltdc, LayerIdx)->CFBLNR = (pLayerCfg->ImageHeight);
-
- /* Enable LTDC_Layer by setting LEN bit */
- LTDC_LAYER(hltdc, LayerIdx)->CR |= (uint32_t)LTDC_LxCR_LEN;
-}
-
-/**
- * @}
- */
-#endif /* STM32F429xx || STM32F439xx */
-#endif /* HAL_LTDC_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_msp_template.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_msp_template.c
deleted file mode 100644
index 62e8973..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_msp_template.c
+++ /dev/null
@@ -1,119 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_msp_template.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief This file contains the HAL System and Peripheral (PPP) MSP initialization
- * and de-initialization functions.
- * It should be copied to the application folder and renamed into 'stm32f4xx_hal_msp.c'.
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup HAL_MSP HAL MSP
- * @brief HAL MSP module.
- * @{
- */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup HAL_MSP_Private_Functions HAL MSP Private Functions
- * @{
- */
-
-/**
- * @brief Initializes the Global MSP.
- * @note This function is called from HAL_Init() function to perform system
- * level initialization (GPIOs, clock, DMA, interrupt).
- * @retval None
- */
-void HAL_MspInit(void)
-{
-
-}
-
-/**
- * @brief DeInitializes the Global MSP.
- * @note This functiona is called from HAL_DeInit() function to perform system
- * level de-initialization (GPIOs, clock, DMA, interrupt).
- * @retval None
- */
-void HAL_MspDeInit(void)
-{
-
-}
-
-/**
- * @brief Initializes the PPP MSP.
- * @note This functiona is called from HAL_PPP_Init() function to perform
- * peripheral(PPP) system level initialization (GPIOs, clock, DMA, interrupt)
- * @retval None
- */
-void HAL_PPP_MspInit(void)
-{
-
-}
-
-/**
- * @brief DeInitializes the PPP MSP.
- * @note This functiona is called from HAL_PPP_DeInit() function to perform
- * peripheral(PPP) system level de-initialization (GPIOs, clock, DMA, interrupt)
- * @retval None
- */
-void HAL_PPP_MspDeInit(void)
-{
-
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c
deleted file mode 100644
index 4b0a4dc..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nand.c
+++ /dev/null
@@ -1,1125 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_nand.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief NAND HAL module driver.
- * This file provides a generic firmware to drive NAND memories mounted
- * as external device.
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- This driver is a generic layered driver which contains a set of APIs used to
- control NAND flash memories. It uses the FMC/FSMC layer functions to interface
- with NAND devices. This driver is used as follows:
-
- (+) NAND flash memory configuration sequence using the function HAL_NAND_Init()
- with control and timing parameters for both common and attribute spaces.
-
- (+) Read NAND flash memory maker and device IDs using the function
- HAL_NAND_Read_ID(). The read information is stored in the NAND_ID_TypeDef
- structure declared by the function caller.
-
- (+) Access NAND flash memory by read/write operations using the functions
- HAL_NAND_Read_Page()/HAL_NAND_Read_SpareArea(), HAL_NAND_Write_Page()/HAL_NAND_Write_SpareArea()
- to read/write page(s)/spare area(s). These functions use specific device
- information (Block, page size..) predefined by the user in the HAL_NAND_Info_TypeDef
- structure. The read/write address information is contained by the Nand_Address_Typedef
- structure passed as parameter.
-
- (+) Perform NAND flash Reset chip operation using the function HAL_NAND_Reset().
-
- (+) Perform NAND flash erase block operation using the function HAL_NAND_Erase_Block().
- The erase block address information is contained in the Nand_Address_Typedef
- structure passed as parameter.
-
- (+) Read the NAND flash status operation using the function HAL_NAND_Read_Status().
-
- (+) You can also control the NAND device by calling the control APIs HAL_NAND_ECC_Enable()/
- HAL_NAND_ECC_Disable() to respectively enable/disable the ECC code correction
- feature or the function HAL_NAND_GetECC() to get the ECC correction code.
-
- (+) You can monitor the NAND device HAL state by calling the function
- HAL_NAND_GetState()
-
- [..]
- (@) This driver is a set of generic APIs which handle standard NAND flash operations.
- If a NAND flash device contains different operations and/or implementations,
- it should be implemented separately.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-
-#ifdef HAL_NAND_MODULE_ENABLED
-
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
- defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
- defined(STM32F446xx)
-
-/** @defgroup NAND NAND
- * @brief NAND HAL module driver
- * @{
- */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @defgroup NAND_Private_Constants NAND Private Constants
- * @{
- */
-
-/**
- * @}
- */
-
-/* Private macro -------------------------------------------------------------*/
-/** @defgroup NAND_Private_Macros NAND Private Macros
- * @{
- */
-
-/**
- * @}
- */
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup NAND_Exported_Functions NAND Exported Functions
- * @{
- */
-
-/** @defgroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
- @verbatim
- ==============================================================================
- ##### NAND Initialization and de-initialization functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to initialize/de-initialize
- the NAND memory
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Perform NAND memory Initialization sequence
- * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
- * the configuration information for NAND module.
- * @param ComSpace_Timing: pointer to Common space timing structure
- * @param AttSpace_Timing: pointer to Attribute space timing structure
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing)
-{
- /* Check the NAND handle state */
- if(hnand == NULL)
- {
- return HAL_ERROR;
- }
-
- if(hnand->State == HAL_NAND_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hnand->Lock = HAL_UNLOCKED;
- /* Initialize the low level hardware (MSP) */
- HAL_NAND_MspInit(hnand);
- }
-
- /* Initialize NAND control Interface */
- FMC_NAND_Init(hnand->Instance, &(hnand->Init));
-
- /* Initialize NAND common space timing Interface */
- FMC_NAND_CommonSpace_Timing_Init(hnand->Instance, ComSpace_Timing, hnand->Init.NandBank);
-
- /* Initialize NAND attribute space timing Interface */
- FMC_NAND_AttributeSpace_Timing_Init(hnand->Instance, AttSpace_Timing, hnand->Init.NandBank);
-
- /* Enable the NAND device */
- __FMC_NAND_ENABLE(hnand->Instance, hnand->Init.NandBank);
-
- /* Update the NAND controller state */
- hnand->State = HAL_NAND_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Perform NAND memory De-Initialization sequence
- * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
- * the configuration information for NAND module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand)
-{
- /* Initialize the low level hardware (MSP) */
- HAL_NAND_MspDeInit(hnand);
-
- /* Configure the NAND registers with their reset values */
- FMC_NAND_DeInit(hnand->Instance, hnand->Init.NandBank);
-
- /* Reset the NAND controller state */
- hnand->State = HAL_NAND_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hnand);
-
- return HAL_OK;
-}
-
-/**
- * @brief NAND MSP Init
- * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
- * the configuration information for NAND module.
- * @retval None
- */
-__weak void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_NAND_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief NAND MSP DeInit
- * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
- * the configuration information for NAND module.
- * @retval None
- */
-__weak void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_NAND_MspDeInit could be implemented in the user file
- */
-}
-
-
-/**
- * @brief This function handles NAND device interrupt request.
- * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
- * the configuration information for NAND module.
- * @retval HAL status
-*/
-void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand)
-{
- /* Check NAND interrupt Rising edge flag */
- if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_RISING_EDGE))
- {
- /* NAND interrupt callback*/
- HAL_NAND_ITCallback(hnand);
-
- /* Clear NAND interrupt Rising edge pending bit */
- __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_RISING_EDGE);
- }
-
- /* Check NAND interrupt Level flag */
- if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_LEVEL))
- {
- /* NAND interrupt callback*/
- HAL_NAND_ITCallback(hnand);
-
- /* Clear NAND interrupt Level pending bit */
- __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_LEVEL);
- }
-
- /* Check NAND interrupt Falling edge flag */
- if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FALLING_EDGE))
- {
- /* NAND interrupt callback*/
- HAL_NAND_ITCallback(hnand);
-
- /* Clear NAND interrupt Falling edge pending bit */
- __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FALLING_EDGE);
- }
-
- /* Check NAND interrupt FIFO empty flag */
- if(__FMC_NAND_GET_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FEMPT))
- {
- /* NAND interrupt callback*/
- HAL_NAND_ITCallback(hnand);
-
- /* Clear NAND interrupt FIFO empty pending bit */
- __FMC_NAND_CLEAR_FLAG(hnand->Instance, hnand->Init.NandBank, FMC_FLAG_FEMPT);
- }
-
-}
-
-/**
- * @brief NAND interrupt feature callback
- * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
- * the configuration information for NAND module.
- * @retval None
- */
-__weak void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_NAND_ITCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup NAND_Exported_Functions_Group2 Input and Output functions
- * @brief Input Output and memory control functions
- *
- @verbatim
- ==============================================================================
- ##### NAND Input and Output functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to use and control the NAND
- memory
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Read the NAND memory electronic signature
- * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
- * the configuration information for NAND module.
- * @param pNAND_ID: NAND ID structure
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID)
-{
- __IO uint32_t data = 0;
- uint32_t deviceaddress = 0;
-
- /* Process Locked */
- __HAL_LOCK(hnand);
-
- /* Check the NAND controller state */
- if(hnand->State == HAL_NAND_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Identify the device address */
- if(hnand->Init.NandBank == FMC_NAND_BANK2)
- {
- deviceaddress = NAND_DEVICE1;
- }
- else
- {
- deviceaddress = NAND_DEVICE2;
- }
-
- /* Update the NAND controller state */
- hnand->State = HAL_NAND_STATE_BUSY;
-
- /* Send Read ID command sequence */
- *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_READID;
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
-
- /* Read the electronic signature from NAND flash */
- data = *(__IO uint32_t *)deviceaddress;
-
- /* Return the data read */
- pNAND_ID->Maker_Id = ADDR_1ST_CYCLE(data);
- pNAND_ID->Device_Id = ADDR_2ND_CYCLE(data);
- pNAND_ID->Third_Id = ADDR_3RD_CYCLE(data);
- pNAND_ID->Fourth_Id = ADDR_4TH_CYCLE(data);
-
- /* Update the NAND controller state */
- hnand->State = HAL_NAND_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hnand);
-
- return HAL_OK;
-}
-
-/**
- * @brief NAND memory reset
- * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
- * the configuration information for NAND module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand)
-{
- uint32_t deviceaddress = 0;
-
- /* Process Locked */
- __HAL_LOCK(hnand);
-
- /* Check the NAND controller state */
- if(hnand->State == HAL_NAND_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Identify the device address */
- if(hnand->Init.NandBank == FMC_NAND_BANK2)
- {
- deviceaddress = NAND_DEVICE1;
- }
- else
- {
- deviceaddress = NAND_DEVICE2;
- }
-
- /* Update the NAND controller state */
- hnand->State = HAL_NAND_STATE_BUSY;
-
- /* Send NAND reset command */
- *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = 0xFF;
-
-
- /* Update the NAND controller state */
- hnand->State = HAL_NAND_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hnand);
-
- return HAL_OK;
-
-}
-
-/**
- * @brief Read Page(s) from NAND memory block
- * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
- * the configuration information for NAND module.
- * @param pAddress : pointer to NAND address structure
- * @param pBuffer : pointer to destination read buffer
- * @param NumPageToRead : number of pages to read from block
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NAND_Read_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead)
-{
- __IO uint32_t index = 0;
- uint32_t deviceaddress = 0, size = 0, numpagesread = 0, addressstatus = NAND_VALID_ADDRESS;
- NAND_AddressTypeDef nandaddress;
- uint32_t addressoffset = 0;
-
- /* Process Locked */
- __HAL_LOCK(hnand);
-
- /* Check the NAND controller state */
- if(hnand->State == HAL_NAND_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Identify the device address */
- if(hnand->Init.NandBank == FMC_NAND_BANK2)
- {
- deviceaddress = NAND_DEVICE1;
- }
- else
- {
- deviceaddress = NAND_DEVICE2;
- }
-
- /* Update the NAND controller state */
- hnand->State = HAL_NAND_STATE_BUSY;
-
- /* Save the content of pAddress as it will be modified */
- nandaddress.Block = pAddress->Block;
- nandaddress.Page = pAddress->Page;
- nandaddress.Zone = pAddress->Zone;
-
- /* Page(s) read loop */
- while((NumPageToRead != 0) && (addressstatus == NAND_VALID_ADDRESS))
- {
- /* update the buffer size */
- size = hnand->Info.PageSize + ((hnand->Info.PageSize) * numpagesread);
-
- /* Get the address offset */
- addressoffset = ARRAY_ADDRESS(&nandaddress, hnand);
-
- /* Send read page command sequence */
- *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
-
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset);
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset);
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset);
-
- /* for 512 and 1 GB devices, 4th cycle is required */
- if(hnand->Info.BlockNbr >= 1024)
- {
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset);
- }
-
- *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1;
-
- /* Get Data into Buffer */
- for(index = size; index != 0; index--)
- {
- *(uint8_t *)pBuffer++ = *(uint8_t *)deviceaddress;
- }
-
- /* Increment read pages number */
- numpagesread++;
-
- /* Decrement pages to read */
- NumPageToRead--;
-
- /* Increment the NAND address */
- addressstatus = HAL_NAND_Address_Inc(hnand, &nandaddress);
- }
-
- /* Update the NAND controller state */
- hnand->State = HAL_NAND_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hnand);
-
- return HAL_OK;
-
-}
-
-/**
- * @brief Write Page(s) to NAND memory block
- * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
- * the configuration information for NAND module.
- * @param pAddress : pointer to NAND address structure
- * @param pBuffer : pointer to source buffer to write
- * @param NumPageToWrite : number of pages to write to block
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NAND_Write_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToWrite)
-{
- __IO uint32_t index = 0;
- uint32_t tickstart = 0;
- uint32_t deviceaddress = 0 , size = 0, numpageswritten = 0, addressstatus = NAND_VALID_ADDRESS;
- NAND_AddressTypeDef nandaddress;
- uint32_t addressoffset = 0;
-
- /* Process Locked */
- __HAL_LOCK(hnand);
-
- /* Check the NAND controller state */
- if(hnand->State == HAL_NAND_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Identify the device address */
- if(hnand->Init.NandBank == FMC_NAND_BANK2)
- {
- deviceaddress = NAND_DEVICE1;
- }
- else
- {
- deviceaddress = NAND_DEVICE2;
- }
-
- /* Update the NAND controller state */
- hnand->State = HAL_NAND_STATE_BUSY;
-
- /* Save the content of pAddress as it will be modified */
- nandaddress.Block = pAddress->Block;
- nandaddress.Page = pAddress->Page;
- nandaddress.Zone = pAddress->Zone;
-
- /* Page(s) write loop */
- while((NumPageToWrite != 0) && (addressstatus == NAND_VALID_ADDRESS))
- {
- /* update the buffer size */
- size = hnand->Info.PageSize + ((hnand->Info.PageSize) * numpageswritten);
-
- /* Get the address offset */
- addressoffset = ARRAY_ADDRESS(&nandaddress, hnand);
-
- /* Send write page command sequence */
- *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_A;
- *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0;
-
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset);
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset);
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset);
-
- /* for 512 and 1 GB devices, 4th cycle is required */
- if(hnand->Info.BlockNbr >= 1024)
- {
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset);
- }
-
- /* Write data to memory */
- for(index = size; index != 0; index--)
- {
- *(__IO uint8_t *)deviceaddress = *(uint8_t *)pBuffer++;
- }
-
- *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Read status until NAND is ready */
- while(HAL_NAND_Read_Status(hnand) != NAND_READY)
- {
- if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Increment written pages number */
- numpageswritten++;
-
- /* Decrement pages to write */
- NumPageToWrite--;
-
- /* Increment the NAND address */
- addressstatus = HAL_NAND_Address_Inc(hnand, &nandaddress);
- }
-
- /* Update the NAND controller state */
- hnand->State = HAL_NAND_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hnand);
-
- return HAL_OK;
-}
-
-/**
- * @brief Read Spare area(s) from NAND memory
- * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
- * the configuration information for NAND module.
- * @param pAddress : pointer to NAND address structure
- * @param pBuffer: pointer to source buffer to write
- * @param NumSpareAreaToRead: Number of spare area to read
- * @retval HAL status
-*/
-HAL_StatusTypeDef HAL_NAND_Read_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead)
-{
- __IO uint32_t index = 0;
- uint32_t deviceaddress = 0, size = 0, num_spare_area_read = 0, addressstatus = NAND_VALID_ADDRESS;
- NAND_AddressTypeDef nandaddress;
- uint32_t addressoffset = 0;
-
- /* Process Locked */
- __HAL_LOCK(hnand);
-
- /* Check the NAND controller state */
- if(hnand->State == HAL_NAND_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Identify the device address */
- if(hnand->Init.NandBank == FMC_NAND_BANK2)
- {
- deviceaddress = NAND_DEVICE1;
- }
- else
- {
- deviceaddress = NAND_DEVICE2;
- }
-
- /* Update the NAND controller state */
- hnand->State = HAL_NAND_STATE_BUSY;
-
- /* Save the content of pAddress as it will be modified */
- nandaddress.Block = pAddress->Block;
- nandaddress.Page = pAddress->Page;
- nandaddress.Zone = pAddress->Zone;
-
- /* Spare area(s) read loop */
- while((NumSpareAreaToRead != 0) && (addressstatus == NAND_VALID_ADDRESS))
- {
- /* update the buffer size */
- size = (hnand->Info.SpareAreaSize) + ((hnand->Info.SpareAreaSize) * num_spare_area_read);
-
- /* Get the address offset */
- addressoffset = ARRAY_ADDRESS(&nandaddress, hnand);
-
- /* Send read spare area command sequence */
- *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C;
-
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset);
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset);
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset);
-
- /* for 512 and 1 GB devices, 4th cycle is required */
- if(hnand->Info.BlockNbr >= 1024)
- {
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset);
- }
-
- *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_TRUE1;
-
- /* Get Data into Buffer */
- for (index = size ;index != 0; index--)
- {
- *(uint8_t *)pBuffer++ = *(uint8_t *)deviceaddress;
- }
-
- /* Increment read spare areas number */
- num_spare_area_read++;
-
- /* Decrement spare areas to read */
- NumSpareAreaToRead--;
-
- /* Increment the NAND address */
- addressstatus = HAL_NAND_Address_Inc(hnand, &nandaddress);
- }
-
- /* Update the NAND controller state */
- hnand->State = HAL_NAND_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hnand);
-
- return HAL_OK;
-}
-
-/**
- * @brief Write Spare area(s) to NAND memory
- * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
- * the configuration information for NAND module.
- * @param pAddress : pointer to NAND address structure
- * @param pBuffer : pointer to source buffer to write
- * @param NumSpareAreaTowrite : number of spare areas to write to block
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NAND_Write_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite)
-{
- __IO uint32_t index = 0;
- uint32_t tickstart = 0;
- uint32_t deviceaddress = 0, size = 0, num_spare_area_written = 0, addressstatus = NAND_VALID_ADDRESS;
- NAND_AddressTypeDef nandaddress;
- uint32_t addressoffset = 0;
-
- /* Process Locked */
- __HAL_LOCK(hnand);
-
- /* Check the NAND controller state */
- if(hnand->State == HAL_NAND_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Identify the device address */
- if(hnand->Init.NandBank == FMC_NAND_BANK2)
- {
- deviceaddress = NAND_DEVICE1;
- }
- else
- {
- deviceaddress = NAND_DEVICE2;
- }
-
- /* Update the FMC_NAND controller state */
- hnand->State = HAL_NAND_STATE_BUSY;
-
- /* Save the content of pAddress as it will be modified */
- nandaddress.Block = pAddress->Block;
- nandaddress.Page = pAddress->Page;
- nandaddress.Zone = pAddress->Zone;
-
- /* Spare area(s) write loop */
- while((NumSpareAreaTowrite != 0) && (addressstatus == NAND_VALID_ADDRESS))
- {
- /* update the buffer size */
- size = (hnand->Info.SpareAreaSize) + ((hnand->Info.SpareAreaSize) * num_spare_area_written);
-
- /* Get the address offset */
- addressoffset = ARRAY_ADDRESS(&nandaddress, hnand);
-
- /* Send write Spare area command sequence */
- *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_AREA_C;
- *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE0;
-
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = 0x00;
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(addressoffset);
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(addressoffset);
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(addressoffset);
-
- /* for 512 and 1 GB devices, 4th cycle is required */
- if(hnand->Info.BlockNbr >= 1024)
- {
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(addressoffset);
- }
-
- /* Write data to memory */
- for(; index < size; index++)
- {
- *(__IO uint8_t *)deviceaddress = *(uint8_t *)pBuffer++;
- }
-
- *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_WRITE_TRUE1;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Read status until NAND is ready */
- while(HAL_NAND_Read_Status(hnand) != NAND_READY)
- {
- if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Increment written spare areas number */
- num_spare_area_written++;
-
- /* Decrement spare areas to write */
- NumSpareAreaTowrite--;
-
- /* Increment the NAND address */
- addressstatus = HAL_NAND_Address_Inc(hnand, &nandaddress);
- }
-
- /* Update the NAND controller state */
- hnand->State = HAL_NAND_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hnand);
-
- return HAL_OK;
-}
-
-/**
- * @brief NAND memory Block erase
- * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
- * the configuration information for NAND module.
- * @param pAddress : pointer to NAND address structure
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress)
-{
- uint32_t deviceaddress = 0;
- uint32_t tickstart = 0;
-
- /* Process Locked */
- __HAL_LOCK(hnand);
-
- /* Check the NAND controller state */
- if(hnand->State == HAL_NAND_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Identify the device address */
- if(hnand->Init.NandBank == FMC_NAND_BANK2)
- {
- deviceaddress = NAND_DEVICE1;
- }
- else
- {
- deviceaddress = NAND_DEVICE2;
- }
-
- /* Update the NAND controller state */
- hnand->State = HAL_NAND_STATE_BUSY;
-
- /* Send Erase block command sequence */
- *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_ERASE0;
-
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_1ST_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_2ND_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_3RD_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
-
- /* for 512 and 1 GB devices, 4th cycle is required */
- if(hnand->Info.BlockNbr >= 1024)
- {
- *(__IO uint8_t *)((uint32_t)(deviceaddress | ADDR_AREA)) = ADDR_4TH_CYCLE(ARRAY_ADDRESS(pAddress, hnand));
- }
-
- *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_ERASE1;
-
- /* Update the NAND controller state */
- hnand->State = HAL_NAND_STATE_READY;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Read status until NAND is ready */
- while(HAL_NAND_Read_Status(hnand) != NAND_READY)
- {
- if((HAL_GetTick() - tickstart ) > NAND_WRITE_TIMEOUT)
- {
- /* Process unlocked */
- __HAL_UNLOCK(hnand);
-
- return HAL_TIMEOUT;
- }
- }
-
- /* Process unlocked */
- __HAL_UNLOCK(hnand);
-
- return HAL_OK;
-}
-
-/**
- * @brief NAND memory read status
- * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
- * the configuration information for NAND module.
- * @retval NAND status
- */
-uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand)
-{
- uint32_t data = 0;
- uint32_t deviceaddress = 0;
-
- /* Identify the device address */
- if(hnand->Init.NandBank == FMC_NAND_BANK2)
- {
- deviceaddress = NAND_DEVICE1;
- }
- else
- {
- deviceaddress = NAND_DEVICE2;
- }
-
- /* Send Read status operation command */
- *(__IO uint8_t *)((uint32_t)(deviceaddress | CMD_AREA)) = NAND_CMD_STATUS;
-
- /* Read status register data */
- data = *(__IO uint8_t *)deviceaddress;
-
- /* Return the status */
- if((data & NAND_ERROR) == NAND_ERROR)
- {
- return NAND_ERROR;
- }
- else if((data & NAND_READY) == NAND_READY)
- {
- return NAND_READY;
- }
-
- return NAND_BUSY;
-}
-
-/**
- * @brief Increment the NAND memory address
- * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
- * the configuration information for NAND module.
- * @param pAddress: pointer to NAND address structure
- * @retval The new status of the increment address operation. It can be:
- * - NAND_VALID_ADDRESS: When the new address is valid address
- * - NAND_INVALID_ADDRESS: When the new address is invalid address
- */
-uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress)
-{
- uint32_t status = NAND_VALID_ADDRESS;
-
- /* Increment page address */
- pAddress->Page++;
-
- /* Check NAND address is valid */
- if(pAddress->Page == hnand->Info.BlockSize)
- {
- pAddress->Page = 0;
- pAddress->Block++;
-
- if(pAddress->Block == hnand->Info.ZoneSize)
- {
- pAddress->Block = 0;
- pAddress->Zone++;
-
- if(pAddress->Zone == (hnand->Info.ZoneSize/ hnand->Info.BlockNbr))
- {
- status = NAND_INVALID_ADDRESS;
- }
- }
- }
-
- return (status);
-}
-/**
- * @}
- */
-
-/** @defgroup NAND_Exported_Functions_Group3 Peripheral Control functions
- * @brief management functions
- *
-@verbatim
- ==============================================================================
- ##### NAND Control functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to control dynamically
- the NAND interface.
-
-@endverbatim
- * @{
- */
-
-
-/**
- * @brief Enables dynamically NAND ECC feature.
- * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
- * the configuration information for NAND module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand)
-{
- /* Check the NAND controller state */
- if(hnand->State == HAL_NAND_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Update the NAND state */
- hnand->State = HAL_NAND_STATE_BUSY;
-
- /* Enable ECC feature */
- FMC_NAND_ECC_Enable(hnand->Instance, hnand->Init.NandBank);
-
- /* Update the NAND state */
- hnand->State = HAL_NAND_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Disables dynamically FMC_NAND ECC feature.
- * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
- * the configuration information for NAND module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand)
-{
- /* Check the NAND controller state */
- if(hnand->State == HAL_NAND_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Update the NAND state */
- hnand->State = HAL_NAND_STATE_BUSY;
-
- /* Disable ECC feature */
- FMC_NAND_ECC_Disable(hnand->Instance, hnand->Init.NandBank);
-
- /* Update the NAND state */
- hnand->State = HAL_NAND_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Disables dynamically NAND ECC feature.
- * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
- * the configuration information for NAND module.
- * @param ECCval: pointer to ECC value
- * @param Timeout: maximum timeout to wait
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Check the NAND controller state */
- if(hnand->State == HAL_NAND_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Update the NAND state */
- hnand->State = HAL_NAND_STATE_BUSY;
-
- /* Get NAND ECC value */
- status = FMC_NAND_GetECC(hnand->Instance, ECCval, hnand->Init.NandBank, Timeout);
-
- /* Update the NAND state */
- hnand->State = HAL_NAND_STATE_READY;
-
- return status;
-}
-
-/**
- * @}
- */
-
-
-/** @defgroup NAND_Exported_Functions_Group4 Peripheral State functions
- * @brief Peripheral State functions
- *
-@verbatim
- ==============================================================================
- ##### NAND State functions #####
- ==============================================================================
- [..]
- This subsection permits to get in run-time the status of the NAND controller
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief return the NAND state
- * @param hnand: pointer to a NAND_HandleTypeDef structure that contains
- * the configuration information for NAND module.
- * @retval HAL state
- */
-HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand)
-{
- return hnand->State;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
- STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\
- STM32F446xx */
-
-#endif /* HAL_NAND_MODULE_ENABLED */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nor.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nor.c
deleted file mode 100644
index 13800c3..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_nor.c
+++ /dev/null
@@ -1,1007 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_nor.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief NOR HAL module driver.
- * This file provides a generic firmware to drive NOR memories mounted
- * as external device.
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- This driver is a generic layered driver which contains a set of APIs used to
- control NOR flash memories. It uses the FMC/FSMC layer functions to interface
- with NOR devices. This driver is used as follows:
-
- (+) NOR flash memory configuration sequence using the function HAL_NOR_Init()
- with control and timing parameters for both normal and extended mode.
-
- (+) Read NOR flash memory manufacturer code and device IDs using the function
- HAL_NOR_Read_ID(). The read information is stored in the NOR_ID_TypeDef
- structure declared by the function caller.
-
- (+) Access NOR flash memory by read/write data unit operations using the functions
- HAL_NOR_Read(), HAL_NOR_Program().
-
- (+) Perform NOR flash erase block/chip operations using the functions
- HAL_NOR_Erase_Block() and HAL_NOR_Erase_Chip().
-
- (+) Read the NOR flash CFI (common flash interface) IDs using the function
- HAL_NOR_Read_CFI(). The read information is stored in the NOR_CFI_TypeDef
- structure declared by the function caller.
-
- (+) You can also control the NOR device by calling the control APIs HAL_NOR_WriteOperation_Enable()/
- HAL_NOR_WriteOperation_Disable() to respectively enable/disable the NOR write operation
-
- (+) You can monitor the NOR device HAL state by calling the function
- HAL_NOR_GetState()
- [..]
- (@) This driver is a set of generic APIs which handle standard NOR flash operations.
- If a NOR flash device contains different operations and/or implementations,
- it should be implemented separately.
-
- *** NOR HAL driver macros list ***
- =============================================
- [..]
- Below the list of most used macros in NOR HAL driver.
-
- (+) NOR_WRITE : NOR memory write data to specified address
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup NOR NOR
- * @brief NOR driver modules
- * @{
- */
-#ifdef HAL_NOR_MODULE_ENABLED
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
- defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
- defined(STM32F446xx)
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-
-/** @defgroup NOR_Private_Defines NOR Private Defines
- * @{
- */
-
-/* Constants to define address to set to write a command */
-#define NOR_CMD_ADDRESS_FIRST (uint16_t)0x0555
-#define NOR_CMD_ADDRESS_FIRST_CFI (uint16_t)0x0055
-#define NOR_CMD_ADDRESS_SECOND (uint16_t)0x02AA
-#define NOR_CMD_ADDRESS_THIRD (uint16_t)0x0555
-#define NOR_CMD_ADDRESS_FOURTH (uint16_t)0x0555
-#define NOR_CMD_ADDRESS_FIFTH (uint16_t)0x02AA
-#define NOR_CMD_ADDRESS_SIXTH (uint16_t)0x0555
-
-/* Constants to define data to program a command */
-#define NOR_CMD_DATA_READ_RESET (uint16_t)0x00F0
-#define NOR_CMD_DATA_FIRST (uint16_t)0x00AA
-#define NOR_CMD_DATA_SECOND (uint16_t)0x0055
-#define NOR_CMD_DATA_AUTO_SELECT (uint16_t)0x0090
-#define NOR_CMD_DATA_PROGRAM (uint16_t)0x00A0
-#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD (uint16_t)0x0080
-#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH (uint16_t)0x00AA
-#define NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH (uint16_t)0x0055
-#define NOR_CMD_DATA_CHIP_ERASE (uint16_t)0x0010
-#define NOR_CMD_DATA_CFI (uint16_t)0x0098
-
-#define NOR_CMD_DATA_BUFFER_AND_PROG (uint8_t)0x25
-#define NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM (uint8_t)0x29
-#define NOR_CMD_DATA_BLOCK_ERASE (uint8_t)0x30
-
-/* Mask on NOR STATUS REGISTER */
-#define NOR_MASK_STATUS_DQ5 (uint16_t)0x0020
-#define NOR_MASK_STATUS_DQ6 (uint16_t)0x0040
-
-/**
- * @}
- */
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup NOR_Exported_Functions NOR Exported Functions
- * @{
- */
-
-/** @defgroup NOR_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
- @verbatim
- ==============================================================================
- ##### NOR Initialization and de_initialization functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to initialize/de-initialize
- the NOR memory
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Perform the NOR memory Initialization sequence
- * @param hnor: pointer to the NOR handle
- * @param Timing: pointer to NOR control timing structure
- * @param ExtTiming: pointer to NOR extended mode timing structure
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming)
-{
- /* Check the NOR handle parameter */
- if(hnor == NULL)
- {
- return HAL_ERROR;
- }
-
- if(hnor->State == HAL_NOR_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hnor->Lock = HAL_UNLOCKED;
- /* Initialize the low level hardware (MSP) */
- HAL_NOR_MspInit(hnor);
- }
-
- /* Initialize NOR control Interface */
- FMC_NORSRAM_Init(hnor->Instance, &(hnor->Init));
-
- /* Initialize NOR timing Interface */
- FMC_NORSRAM_Timing_Init(hnor->Instance, Timing, hnor->Init.NSBank);
-
- /* Initialize NOR extended mode timing Interface */
- FMC_NORSRAM_Extended_Timing_Init(hnor->Extended, ExtTiming, hnor->Init.NSBank, hnor->Init.ExtendedMode);
-
- /* Enable the NORSRAM device */
- __FMC_NORSRAM_ENABLE(hnor->Instance, hnor->Init.NSBank);
-
- /* Check the NOR controller state */
- hnor->State = HAL_NOR_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Perform NOR memory De-Initialization sequence
- * @param hnor: pointer to a NOR_HandleTypeDef structure that contains
- * the configuration information for NOR module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor)
-{
- /* De-Initialize the low level hardware (MSP) */
- HAL_NOR_MspDeInit(hnor);
-
- /* Configure the NOR registers with their reset values */
- FMC_NORSRAM_DeInit(hnor->Instance, hnor->Extended, hnor->Init.NSBank);
-
- /* Update the NOR controller state */
- hnor->State = HAL_NOR_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hnor);
-
- return HAL_OK;
-}
-
-/**
- * @brief NOR MSP Init
- * @param hnor: pointer to a NOR_HandleTypeDef structure that contains
- * the configuration information for NOR module.
- * @retval None
- */
-__weak void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_NOR_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief NOR MSP DeInit
- * @param hnor: pointer to a NOR_HandleTypeDef structure that contains
- * the configuration information for NOR module.
- * @retval None
- */
-__weak void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_NOR_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @brief NOR BSP Wait for Ready/Busy signal
- * @param hnor: pointer to a NOR_HandleTypeDef structure that contains
- * the configuration information for NOR module.
- * @param Timeout: Maximum timeout value
- * @retval None
- */
-__weak void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_NOR_BspWait could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup NOR_Exported_Functions_Group2 Input and Output functions
- * @brief Input Output and memory control functions
- *
- @verbatim
- ==============================================================================
- ##### NOR Input and Output functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to use and control the NOR memory
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Read NOR flash IDs
- * @param hnor: pointer to the NOR handle
- * @param pNOR_ID : pointer to NOR ID structure
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID)
-{
- uint32_t deviceaddress = 0;
-
- /* Process Locked */
- __HAL_LOCK(hnor);
-
- /* Check the NOR controller state */
- if(hnor->State == HAL_NOR_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Select the NOR device address */
- if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
- {
- deviceaddress = NOR_MEMORY_ADRESS1;
- }
- else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
- {
- deviceaddress = NOR_MEMORY_ADRESS2;
- }
- else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
- {
- deviceaddress = NOR_MEMORY_ADRESS3;
- }
- else /* FMC_NORSRAM_BANK4 */
- {
- deviceaddress = NOR_MEMORY_ADRESS4;
- }
-
- /* Update the NOR controller state */
- hnor->State = HAL_NOR_STATE_BUSY;
-
- /* Send read ID command */
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_AUTO_SELECT);
-
- /* Read the NOR IDs */
- pNOR_ID->Manufacturer_Code = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, MC_ADDRESS);
- pNOR_ID->Device_Code1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, DEVICE_CODE1_ADDR);
- pNOR_ID->Device_Code2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, DEVICE_CODE2_ADDR);
- pNOR_ID->Device_Code3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, DEVICE_CODE3_ADDR);
-
- /* Check the NOR controller state */
- hnor->State = HAL_NOR_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hnor);
-
- return HAL_OK;
-}
-
-/**
- * @brief Returns the NOR memory to Read mode.
- * @param hnor: pointer to the NOR handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor)
-{
- uint32_t deviceaddress = 0;
-
- /* Process Locked */
- __HAL_LOCK(hnor);
-
- /* Check the NOR controller state */
- if(hnor->State == HAL_NOR_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Select the NOR device address */
- if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
- {
- deviceaddress = NOR_MEMORY_ADRESS1;
- }
- else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
- {
- deviceaddress = NOR_MEMORY_ADRESS2;
- }
- else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
- {
- deviceaddress = NOR_MEMORY_ADRESS3;
- }
- else /* FMC_NORSRAM_BANK4 */
- {
- deviceaddress = NOR_MEMORY_ADRESS4;
- }
-
- NOR_WRITE(deviceaddress, NOR_CMD_DATA_READ_RESET);
-
- /* Check the NOR controller state */
- hnor->State = HAL_NOR_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hnor);
-
- return HAL_OK;
-}
-
-/**
- * @brief Read data from NOR memory
- * @param hnor: pointer to the NOR handle
- * @param pAddress: pointer to Device address
- * @param pData : pointer to read data
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData)
-{
- uint32_t deviceaddress = 0;
-
- /* Process Locked */
- __HAL_LOCK(hnor);
-
- /* Check the NOR controller state */
- if(hnor->State == HAL_NOR_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Select the NOR device address */
- if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
- {
- deviceaddress = NOR_MEMORY_ADRESS1;
- }
- else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
- {
- deviceaddress = NOR_MEMORY_ADRESS2;
- }
- else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
- {
- deviceaddress = NOR_MEMORY_ADRESS3;
- }
- else /* FMC_NORSRAM_BANK4 */
- {
- deviceaddress = NOR_MEMORY_ADRESS4;
- }
-
- /* Update the NOR controller state */
- hnor->State = HAL_NOR_STATE_BUSY;
-
- /* Send read data command */
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
- NOR_WRITE((uint32_t)pAddress, NOR_CMD_DATA_READ_RESET);
-
- /* Read the data */
- *pData = *(__IO uint32_t *)(uint32_t)pAddress;
-
- /* Check the NOR controller state */
- hnor->State = HAL_NOR_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hnor);
-
- return HAL_OK;
-}
-
-/**
- * @brief Program data to NOR memory
- * @param hnor: pointer to the NOR handle
- * @param pAddress: Device address
- * @param pData : pointer to the data to write
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData)
-{
- uint32_t deviceaddress = 0;
-
- /* Process Locked */
- __HAL_LOCK(hnor);
-
- /* Check the NOR controller state */
- if(hnor->State == HAL_NOR_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Select the NOR device address */
- if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
- {
- deviceaddress = NOR_MEMORY_ADRESS1;
- }
- else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
- {
- deviceaddress = NOR_MEMORY_ADRESS2;
- }
- else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
- {
- deviceaddress = NOR_MEMORY_ADRESS3;
- }
- else /* FMC_NORSRAM_BANK4 */
- {
- deviceaddress = NOR_MEMORY_ADRESS4;
- }
-
- /* Update the NOR controller state */
- hnor->State = HAL_NOR_STATE_BUSY;
-
- /* Send program data command */
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_PROGRAM);
-
- /* Write the data */
- NOR_WRITE(pAddress, *pData);
-
- /* Check the NOR controller state */
- hnor->State = HAL_NOR_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hnor);
-
- return HAL_OK;
-}
-
-/**
- * @brief Reads a half-word buffer from the NOR memory.
- * @param hnor: pointer to the NOR handle
- * @param uwAddress: NOR memory internal address to read from.
- * @param pData: pointer to the buffer that receives the data read from the
- * NOR memory.
- * @param uwBufferSize : number of Half word to read.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize)
-{
- uint32_t deviceaddress = 0;
-
- /* Process Locked */
- __HAL_LOCK(hnor);
-
- /* Check the NOR controller state */
- if(hnor->State == HAL_NOR_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Select the NOR device address */
- if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
- {
- deviceaddress = NOR_MEMORY_ADRESS1;
- }
- else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
- {
- deviceaddress = NOR_MEMORY_ADRESS2;
- }
- else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
- {
- deviceaddress = NOR_MEMORY_ADRESS3;
- }
- else /* FMC_NORSRAM_BANK4 */
- {
- deviceaddress = NOR_MEMORY_ADRESS4;
- }
-
- /* Update the NOR controller state */
- hnor->State = HAL_NOR_STATE_BUSY;
-
- /* Send read data command */
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
- NOR_WRITE(uwAddress, 0x00F0);
-
- /* Read buffer */
- while( uwBufferSize > 0)
- {
- *pData++ = *(__IO uint16_t *)uwAddress;
- uwAddress += 2;
- uwBufferSize--;
- }
-
- /* Check the NOR controller state */
- hnor->State = HAL_NOR_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hnor);
-
- return HAL_OK;
-}
-
-/**
- * @brief Writes a half-word buffer to the NOR memory. This function must be used
- only with S29GL128P NOR memory.
- * @param hnor: pointer to the NOR handle
- * @param uwAddress: NOR memory internal start write address
- * @param pData: pointer to source data buffer.
- * @param uwBufferSize: Size of the buffer to write
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize)
-{
- uint16_t * p_currentaddress = (uint16_t *)NULL;
- uint16_t * p_endaddress = (uint16_t *)NULL;
- uint32_t lastloadedaddress = 0, deviceaddress = 0;
-
- /* Process Locked */
- __HAL_LOCK(hnor);
-
- /* Check the NOR controller state */
- if(hnor->State == HAL_NOR_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Select the NOR device address */
- if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
- {
- deviceaddress = NOR_MEMORY_ADRESS1;
- }
- else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
- {
- deviceaddress = NOR_MEMORY_ADRESS2;
- }
- else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
- {
- deviceaddress = NOR_MEMORY_ADRESS3;
- }
- else /* FMC_NORSRAM_BANK4 */
- {
- deviceaddress = NOR_MEMORY_ADRESS4;
- }
-
- /* Update the NOR controller state */
- hnor->State = HAL_NOR_STATE_BUSY;
-
- /* Initialize variables */
- p_currentaddress = (uint16_t*)((uint32_t)(uwAddress));
- p_endaddress = p_currentaddress + (uwBufferSize-1);
- lastloadedaddress = (uint32_t)(uwAddress);
-
- /* Issue unlock command sequence */
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
-
- /* Write Buffer Load Command */
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, uwAddress), NOR_CMD_DATA_BUFFER_AND_PROG);
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, uwAddress), (uwBufferSize - 1));
-
- /* Load Data into NOR Buffer */
- while(p_currentaddress <= p_endaddress)
- {
- /* Store last loaded address & data value (for polling) */
- lastloadedaddress = (uint32_t)p_currentaddress;
-
- NOR_WRITE(p_currentaddress, *pData++);
-
- p_currentaddress ++;
- }
-
- NOR_WRITE((uint32_t)(lastloadedaddress), NOR_CMD_DATA_BUFFER_AND_PROG_CONFIRM);
-
- /* Check the NOR controller state */
- hnor->State = HAL_NOR_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hnor);
-
- return HAL_OK;
-
-}
-
-/**
- * @brief Erase the specified block of the NOR memory
- * @param hnor: pointer to the NOR handle
- * @param BlockAddress : Block to erase address
- * @param Address: Device address
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address)
-{
- uint32_t deviceaddress = 0;
-
- /* Process Locked */
- __HAL_LOCK(hnor);
-
- /* Check the NOR controller state */
- if(hnor->State == HAL_NOR_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Select the NOR device address */
- if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
- {
- deviceaddress = NOR_MEMORY_ADRESS1;
- }
- else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
- {
- deviceaddress = NOR_MEMORY_ADRESS2;
- }
- else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
- {
- deviceaddress = NOR_MEMORY_ADRESS3;
- }
- else /* FMC_NORSRAM_BANK4 */
- {
- deviceaddress = NOR_MEMORY_ADRESS4;
- }
-
- /* Update the NOR controller state */
- hnor->State = HAL_NOR_STATE_BUSY;
-
- /* Send block erase command sequence */
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FOURTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH);
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIFTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH);
- NOR_WRITE((uint32_t)(BlockAddress + Address), NOR_CMD_DATA_BLOCK_ERASE);
-
- /* Check the NOR memory status and update the controller state */
- hnor->State = HAL_NOR_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hnor);
-
- return HAL_OK;
-
-}
-
-/**
- * @brief Erase the entire NOR chip.
- * @param hnor: pointer to the NOR handle
- * @param Address : Device address
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address)
-{
- uint32_t deviceaddress = 0;
-
- /* Process Locked */
- __HAL_LOCK(hnor);
-
- /* Check the NOR controller state */
- if(hnor->State == HAL_NOR_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Select the NOR device address */
- if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
- {
- deviceaddress = NOR_MEMORY_ADRESS1;
- }
- else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
- {
- deviceaddress = NOR_MEMORY_ADRESS2;
- }
- else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
- {
- deviceaddress = NOR_MEMORY_ADRESS3;
- }
- else /* FMC_NORSRAM_BANK4 */
- {
- deviceaddress = NOR_MEMORY_ADRESS4;
- }
-
- /* Update the NOR controller state */
- hnor->State = HAL_NOR_STATE_BUSY;
-
- /* Send NOR chip erase command sequence */
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST), NOR_CMD_DATA_FIRST);
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SECOND), NOR_CMD_DATA_SECOND);
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_THIRD), NOR_CMD_DATA_CHIP_BLOCK_ERASE_THIRD);
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FOURTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FOURTH);
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIFTH), NOR_CMD_DATA_CHIP_BLOCK_ERASE_FIFTH);
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_SIXTH), NOR_CMD_DATA_CHIP_ERASE);
-
- /* Check the NOR memory status and update the controller state */
- hnor->State = HAL_NOR_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hnor);
-
- return HAL_OK;
-}
-
-/**
- * @brief Read NOR flash CFI IDs
- * @param hnor: pointer to the NOR handle
- * @param pNOR_CFI : pointer to NOR CFI IDs structure
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI)
-{
- uint32_t deviceaddress = 0;
-
- /* Process Locked */
- __HAL_LOCK(hnor);
-
- /* Check the NOR controller state */
- if(hnor->State == HAL_NOR_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Select the NOR device address */
- if (hnor->Init.NSBank == FMC_NORSRAM_BANK1)
- {
- deviceaddress = NOR_MEMORY_ADRESS1;
- }
- else if (hnor->Init.NSBank == FMC_NORSRAM_BANK2)
- {
- deviceaddress = NOR_MEMORY_ADRESS2;
- }
- else if (hnor->Init.NSBank == FMC_NORSRAM_BANK3)
- {
- deviceaddress = NOR_MEMORY_ADRESS3;
- }
- else /* FMC_NORSRAM_BANK4 */
- {
- deviceaddress = NOR_MEMORY_ADRESS4;
- }
-
- /* Update the NOR controller state */
- hnor->State = HAL_NOR_STATE_BUSY;
-
- /* Send read CFI query command */
- NOR_WRITE(NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, NOR_CMD_ADDRESS_FIRST_CFI), NOR_CMD_DATA_CFI);
-
- /* read the NOR CFI information */
- pNOR_CFI->CFI_1 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, CFI1_ADDRESS);
- pNOR_CFI->CFI_2 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, CFI2_ADDRESS);
- pNOR_CFI->CFI_3 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, CFI3_ADDRESS);
- pNOR_CFI->CFI_4 = *(__IO uint16_t *) NOR_ADDR_SHIFT(deviceaddress, NOR_MEMORY_8B, CFI4_ADDRESS);
-
- /* Check the NOR controller state */
- hnor->State = HAL_NOR_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hnor);
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup NOR_Exported_Functions_Group3 Control functions
- * @brief management functions
- *
-@verbatim
- ==============================================================================
- ##### NOR Control functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to control dynamically
- the NOR interface.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Enables dynamically NOR write operation.
- * @param hnor: pointer to the NOR handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor)
-{
- /* Process Locked */
- __HAL_LOCK(hnor);
-
- /* Enable write operation */
- FMC_NORSRAM_WriteOperation_Enable(hnor->Instance, hnor->Init.NSBank);
-
- /* Update the NOR controller state */
- hnor->State = HAL_NOR_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hnor);
-
- return HAL_OK;
-}
-
-/**
- * @brief Disables dynamically NOR write operation.
- * @param hnor: pointer to the NOR handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor)
-{
- /* Process Locked */
- __HAL_LOCK(hnor);
-
- /* Update the SRAM controller state */
- hnor->State = HAL_NOR_STATE_BUSY;
-
- /* Disable write operation */
- FMC_NORSRAM_WriteOperation_Disable(hnor->Instance, hnor->Init.NSBank);
-
- /* Update the NOR controller state */
- hnor->State = HAL_NOR_STATE_PROTECTED;
-
- /* Process unlocked */
- __HAL_UNLOCK(hnor);
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup NOR_Exported_Functions_Group4 State functions
- * @brief Peripheral State functions
- *
-@verbatim
- ==============================================================================
- ##### NOR State functions #####
- ==============================================================================
- [..]
- This subsection permits to get in run-time the status of the NOR controller
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief return the NOR controller state
- * @param hnor: pointer to the NOR handle
- * @retval NOR controller state
- */
-HAL_NOR_StateTypeDef HAL_NOR_GetState(NOR_HandleTypeDef *hnor)
-{
- return hnor->State;
-}
-
-/**
- * @brief Returns the NOR operation status.
- * @param hnor: pointer to the NOR handle
- * @param Address: Device address
- * @param Timeout: NOR programming Timeout
- * @retval NOR_Status: The returned value can be: HAL_NOR_STATUS_SUCCESS, HAL_NOR_STATUS_ERROR
- * or HAL_NOR_STATUS_TIMEOUT
- */
-HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout)
-{
- HAL_NOR_StatusTypeDef status = HAL_NOR_STATUS_ONGOING;
- uint16_t tmpSR1 = 0, tmpSR2 = 0;
- uint32_t tickstart = 0;
-
- /* Poll on NOR memory Ready/Busy signal ------------------------------------*/
- HAL_NOR_MspWait(hnor, Timeout);
-
- /* Get the NOR memory operation status -------------------------------------*/
-
- /* Get tick */
- tickstart = HAL_GetTick();
- while((status != HAL_NOR_STATUS_SUCCESS ) && (status != HAL_NOR_STATUS_TIMEOUT))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- status = HAL_NOR_STATUS_TIMEOUT;
- }
- }
-
- /* Read NOR status register (DQ6 and DQ5) */
- tmpSR1 = *(__IO uint16_t *)Address;
- tmpSR2 = *(__IO uint16_t *)Address;
-
- /* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS */
- if((tmpSR1 & NOR_MASK_STATUS_DQ6) == (tmpSR2 & NOR_MASK_STATUS_DQ6))
- {
- return HAL_NOR_STATUS_SUCCESS ;
- }
-
- if((tmpSR1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5)
- {
- status = HAL_NOR_STATUS_ONGOING;
- }
-
- tmpSR1 = *(__IO uint16_t *)Address;
- tmpSR2 = *(__IO uint16_t *)Address;
-
- /* If DQ6 did not toggle between the two reads then return HAL_NOR_STATUS_SUCCESS */
- if((tmpSR1 & NOR_MASK_STATUS_DQ6) == (tmpSR2 & NOR_MASK_STATUS_DQ6))
- {
- return HAL_NOR_STATUS_SUCCESS;
- }
- if((tmpSR1 & NOR_MASK_STATUS_DQ5) == NOR_MASK_STATUS_DQ5)
- {
- return HAL_NOR_STATUS_ERROR;
- }
- }
-
- /* Return the operation status */
- return status;
-}
-
-/**
- * @}
- */
-
-
-/**
- * @}
- */
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx ||\
- STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
-#endif /* HAL_NOR_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pccard.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pccard.c
deleted file mode 100644
index 290e6fc..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pccard.c
+++ /dev/null
@@ -1,742 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_pccard.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief PCCARD HAL module driver.
- * This file provides a generic firmware to drive PCCARD memories mounted
- * as external device.
- *
- @verbatim
- ===============================================================================
- ##### How to use this driver #####
- ===============================================================================
- [..]
- This driver is a generic layered driver which contains a set of APIs used to
- control PCCARD/compact flash memories. It uses the FMC/FSMC layer functions
- to interface with PCCARD devices. This driver is used for:
-
- (+) PCCARD/Compact Flash memory configuration sequence using the function
- HAL_PCCARD_Init()/HAL_CF_Init() with control and timing parameters for
- both common and attribute spaces.
-
- (+) Read PCCARD/Compact Flash memory maker and device IDs using the function
- HAL_PCCARD_Read_ID()/HAL_CF_Read_ID(). The read information is stored in
- the CompactFlash_ID structure declared by the function caller.
-
- (+) Access PCCARD/Compact Flash memory by read/write operations using the functions
- HAL_PCCARD_Read_Sector()/ HAL_PCCARD_Write_Sector() -
- HAL_CF_Read_Sector()/HAL_CF_Write_Sector(), to read/write sector.
-
- (+) Perform PCCARD/Compact Flash Reset chip operation using the function
- HAL_PCCARD_Reset()/HAL_CF_Reset.
-
- (+) Perform PCCARD/Compact Flash erase sector operation using the function
- HAL_PCCARD_Erase_Sector()/HAL_CF_Erase_Sector.
-
- (+) Read the PCCARD/Compact Flash status operation using the function
- HAL_PCCARD_ReadStatus()/HAL_CF_ReadStatus().
-
- (+) You can monitor the PCCARD/Compact Flash device HAL state by calling
- the function HAL_PCCARD_GetState()/HAL_CF_GetState()
-
- [..]
- (@) This driver is a set of generic APIs which handle standard PCCARD/compact flash
- operations. If a PCCARD/Compact Flash device contains different operations
- and/or implementations, it should be implemented separately.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-#ifdef HAL_PCCARD_MODULE_ENABLED
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
- defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
-/** @defgroup PCCARD PCCARD
- * @brief PCCARD HAL module driver
- * @{
- */
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-
-/** @defgroup PCCARD_Private_Defines PCCARD Private Defines
- * @{
- */
-#define PCCARD_TIMEOUT_READ_ID (uint32_t)0x0000FFFF
-#define PCCARD_TIMEOUT_READ_WRITE_SECTOR (uint32_t)0x0000FFFF
-#define PCCARD_TIMEOUT_ERASE_SECTOR (uint32_t)0x00000400
-#define PCCARD_TIMEOUT_STATUS (uint32_t)0x01000000
-
-#define PCCARD_STATUS_OK (uint8_t)0x58
-#define PCCARD_STATUS_WRITE_OK (uint8_t)0x50
-/**
- * @}
- */
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function ----------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup PCCARD_Exported_Functions PCCARD Exported Functions
- * @{
- */
-
-/** @defgroup PCCARD_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
- @verbatim
- ==============================================================================
- ##### PCCARD Initialization and de-initialization functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to initialize/de-initialize
- the PCCARD memory
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Perform the PCCARD memory Initialization sequence
- * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
- * the configuration information for PCCARD module.
- * @param ComSpaceTiming: Common space timing structure
- * @param AttSpaceTiming: Attribute space timing structure
- * @param IOSpaceTiming: IO space timing structure
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FMC_NAND_PCC_TimingTypeDef *ComSpaceTiming, FMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, FMC_NAND_PCC_TimingTypeDef *IOSpaceTiming)
-{
- /* Check the PCCARD controller state */
- if(hpccard == NULL)
- {
- return HAL_ERROR;
- }
-
- if(hpccard->State == HAL_PCCARD_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hpccard->Lock = HAL_UNLOCKED;
- /* Initialize the low level hardware (MSP) */
- HAL_PCCARD_MspInit(hpccard);
- }
-
- /* Initialize the PCCARD state */
- hpccard->State = HAL_PCCARD_STATE_BUSY;
-
- /* Initialize PCCARD control Interface */
- FMC_PCCARD_Init(hpccard->Instance, &(hpccard->Init));
-
- /* Init PCCARD common space timing Interface */
- FMC_PCCARD_CommonSpace_Timing_Init(hpccard->Instance, ComSpaceTiming);
-
- /* Init PCCARD attribute space timing Interface */
- FMC_PCCARD_AttributeSpace_Timing_Init(hpccard->Instance, AttSpaceTiming);
-
- /* Init PCCARD IO space timing Interface */
- FMC_PCCARD_IOSpace_Timing_Init(hpccard->Instance, IOSpaceTiming);
-
- /* Enable the PCCARD device */
- __FMC_PCCARD_ENABLE(hpccard->Instance);
-
- /* Update the PCCARD state */
- hpccard->State = HAL_PCCARD_STATE_READY;
-
- return HAL_OK;
-
-}
-
-/**
- * @brief Perform the PCCARD memory De-initialization sequence
- * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
- * the configuration information for PCCARD module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCCARD_DeInit(PCCARD_HandleTypeDef *hpccard)
-{
- /* De-Initialize the low level hardware (MSP) */
- HAL_PCCARD_MspDeInit(hpccard);
-
- /* Configure the PCCARD registers with their reset values */
- FMC_PCCARD_DeInit(hpccard->Instance);
-
- /* Update the PCCARD controller state */
- hpccard->State = HAL_PCCARD_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hpccard);
-
- return HAL_OK;
-}
-
-/**
- * @brief PCCARD MSP Init
- * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
- * the configuration information for PCCARD module.
- * @retval None
- */
-__weak void HAL_PCCARD_MspInit(PCCARD_HandleTypeDef *hpccard)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PCCARD_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief PCCARD MSP DeInit
- * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
- * the configuration information for PCCARD module.
- * @retval None
- */
-__weak void HAL_PCCARD_MspDeInit(PCCARD_HandleTypeDef *hpccard)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PCCARD_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup PCCARD_Exported_Functions_Group2 Input and Output functions
- * @brief Input Output and memory control functions
- *
- @verbatim
- ==============================================================================
- ##### PCCARD Input and Output functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to use and control the PCCARD memory
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Read Compact Flash's ID.
- * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
- * the configuration information for PCCARD module.
- * @param CompactFlash_ID: Compact flash ID structure.
- * @param pStatus: pointer to compact flash status
- * @retval HAL status
- *
- */
-HAL_StatusTypeDef HAL_PCCARD_Read_ID(PCCARD_HandleTypeDef *hpccard, uint8_t CompactFlash_ID[], uint8_t *pStatus)
-{
- uint32_t timeout = PCCARD_TIMEOUT_READ_ID, index = 0;
- uint8_t status = 0;
-
- /* Process Locked */
- __HAL_LOCK(hpccard);
-
- /* Check the PCCARD controller state */
- if(hpccard->State == HAL_PCCARD_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Update the PCCARD controller state */
- hpccard->State = HAL_PCCARD_STATE_BUSY;
-
- /* Initialize the PCCARD status */
- *pStatus = PCCARD_READY;
-
- /* Send the Identify Command */
- *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD) = 0xECEC;
-
- /* Read PCCARD IDs and timeout treatment */
- do
- {
- /* Read the PCCARD status */
- status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
-
- timeout--;
- }while((status != PCCARD_STATUS_OK) && timeout);
-
- if(timeout == 0)
- {
- *pStatus = PCCARD_TIMEOUT_ERROR;
- }
- else
- {
- /* Read PCCARD ID bytes */
- for(index = 0; index < 16; index++)
- {
- CompactFlash_ID[index] = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_DATA);
- }
- }
-
- /* Update the PCCARD controller state */
- hpccard->State = HAL_PCCARD_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hpccard);
-
- return HAL_OK;
-}
-
-/**
- * @brief Read sector from PCCARD memory
- * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
- * the configuration information for PCCARD module.
- * @param pBuffer: pointer to destination read buffer
- * @param SectorAddress: Sector address to read
- * @param pStatus: pointer to PCCARD status
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCCARD_Read_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus)
-{
- uint32_t timeout = PCCARD_TIMEOUT_READ_WRITE_SECTOR, index = 0;
- uint8_t status = 0;
-
- /* Process Locked */
- __HAL_LOCK(hpccard);
-
- /* Check the PCCARD controller state */
- if(hpccard->State == HAL_PCCARD_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Update the PCCARD controller state */
- hpccard->State = HAL_PCCARD_STATE_BUSY;
-
- /* Initialize PCCARD status */
- *pStatus = PCCARD_READY;
-
- /* Set the parameters to write a sector */
- *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_HIGH) = (uint16_t)0x00;
- *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_COUNT) = ((uint16_t)0x0100 ) | ((uint16_t)SectorAddress);
- *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD) = (uint16_t)0xE4A0;
-
- do
- {
- /* wait till the Status = 0x80 */
- status = *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
- timeout--;
- }while((status == 0x80) && timeout);
-
- if(timeout == 0)
- {
- *pStatus = PCCARD_TIMEOUT_ERROR;
- }
-
- timeout = PCCARD_TIMEOUT_READ_WRITE_SECTOR;
-
- do
- {
- /* wait till the Status = PCCARD_STATUS_OK */
- status = *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
- timeout--;
- }while((status != PCCARD_STATUS_OK) && timeout);
-
- if(timeout == 0)
- {
- *pStatus = PCCARD_TIMEOUT_ERROR;
- }
-
- /* Read bytes */
- for(; index < PCCARD_SECTOR_SIZE; index++)
- {
- *(uint16_t *)pBuffer++ = *(uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR);
- }
-
- /* Update the PCCARD controller state */
- hpccard->State = HAL_PCCARD_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hpccard);
-
- return HAL_OK;
-}
-
-
-/**
- * @brief Write sector to PCCARD memory
- * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
- * the configuration information for PCCARD module.
- * @param pBuffer: pointer to source write buffer
- * @param SectorAddress: Sector address to write
- * @param pStatus: pointer to PCCARD status
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCCARD_Write_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus)
-{
- uint32_t timeout = PCCARD_TIMEOUT_READ_WRITE_SECTOR, index = 0;
- uint8_t status = 0;
-
- /* Process Locked */
- __HAL_LOCK(hpccard);
-
- /* Check the PCCARD controller state */
- if(hpccard->State == HAL_PCCARD_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Update the PCCARD controller state */
- hpccard->State = HAL_PCCARD_STATE_BUSY;
-
- /* Initialize PCCARD status */
- *pStatus = PCCARD_READY;
-
- /* Set the parameters to write a sector */
- *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_HIGH) = (uint16_t)0x00;
- *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_COUNT) = ((uint16_t)0x0100 ) | ((uint16_t)SectorAddress);
- *(__IO uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD) = (uint16_t)0x30A0;
-
- do
- {
- /* Wait till the Status = PCCARD_STATUS_OK */
- status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
- timeout--;
- }while((status != PCCARD_STATUS_OK) && timeout);
-
- if(timeout == 0)
- {
- *pStatus = PCCARD_TIMEOUT_ERROR;
- }
-
- /* Write bytes */
- for(; index < PCCARD_SECTOR_SIZE; index++)
- {
- *(uint16_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR) = *(uint16_t *)pBuffer++;
- }
-
- do
- {
- /* Wait till the Status = PCCARD_STATUS_WRITE_OK */
- status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
- timeout--;
- }while((status != PCCARD_STATUS_WRITE_OK) && timeout);
-
- if(timeout == 0)
- {
- *pStatus = PCCARD_TIMEOUT_ERROR;
- }
-
- /* Update the PCCARD controller state */
- hpccard->State = HAL_PCCARD_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hpccard);
-
- return HAL_OK;
-}
-
-
-/**
- * @brief Erase sector from PCCARD memory
- * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
- * the configuration information for PCCARD module.
- * @param SectorAddress: Sector address to erase
- * @param pStatus: pointer to PCCARD status
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCCARD_Erase_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t SectorAddress, uint8_t *pStatus)
-{
- uint32_t timeout = PCCARD_TIMEOUT_ERASE_SECTOR;
- uint8_t status = 0;
-
- /* Process Locked */
- __HAL_LOCK(hpccard);
-
- /* Check the PCCARD controller state */
- if(hpccard->State == HAL_PCCARD_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Update the PCCARD controller state */
- hpccard->State = HAL_PCCARD_STATE_BUSY;
-
- /* Initialize PCCARD status */
- *pStatus = PCCARD_READY;
-
- /* Set the parameters to write a sector */
- *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_LOW) = 0x00;
- *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CYLINDER_HIGH) = 0x00;
- *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_NUMBER) = SectorAddress;
- *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_SECTOR_COUNT) = 0x01;
- *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_CARD_HEAD) = 0xA0;
- *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD) = ATA_ERASE_SECTOR_CMD;
-
- /* wait till the PCCARD is ready */
- status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
-
- while((status != PCCARD_STATUS_WRITE_OK) && timeout)
- {
- status = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
- timeout--;
- }
-
- if(timeout == 0)
- {
- *pStatus = PCCARD_TIMEOUT_ERROR;
- }
-
- /* Check the PCCARD controller state */
- hpccard->State = HAL_PCCARD_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hpccard);
-
- return HAL_OK;
-}
-
-/**
- * @brief Reset the PCCARD memory
- * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
- * the configuration information for PCCARD module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCCARD_Reset(PCCARD_HandleTypeDef *hpccard)
-{
- /* Process Locked */
- __HAL_LOCK(hpccard);
-
- /* Check the PCCARD controller state */
- if(hpccard->State == HAL_PCCARD_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Provide a SW reset and Read and verify the:
- - PCCard Configuration Option Register at address 0x98000200 --> 0x80
- - Card Configuration and Status Register at address 0x98000202 --> 0x00
- - Pin Replacement Register at address 0x98000204 --> 0x0C
- - Socket and Copy Register at address 0x98000206 --> 0x00
- */
-
- /* Check the PCCARD controller state */
- hpccard->State = HAL_PCCARD_STATE_BUSY;
-
- *(__IO uint8_t *)(PCCARD_ATTRIBUTE_SPACE_ADDRESS | ATA_CARD_CONFIGURATION ) = 0x01;
-
- /* Check the PCCARD controller state */
- hpccard->State = HAL_PCCARD_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hpccard);
-
- return HAL_OK;
-}
-
-/**
- * @brief This function handles PCCARD device interrupt request.
- * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
- * the configuration information for PCCARD module.
- * @retval HAL status
-*/
-void HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard)
-{
- /* Check PCCARD interrupt Rising edge flag */
- if(__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_RISING_EDGE))
- {
- /* PCCARD interrupt callback*/
- HAL_PCCARD_ITCallback(hpccard);
-
- /* Clear PCCARD interrupt Rising edge pending bit */
- __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_RISING_EDGE);
- }
-
- /* Check PCCARD interrupt Level flag */
- if(__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_LEVEL))
- {
- /* PCCARD interrupt callback*/
- HAL_PCCARD_ITCallback(hpccard);
-
- /* Clear PCCARD interrupt Level pending bit */
- __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_LEVEL);
- }
-
- /* Check PCCARD interrupt Falling edge flag */
- if(__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_FALLING_EDGE))
- {
- /* PCCARD interrupt callback*/
- HAL_PCCARD_ITCallback(hpccard);
-
- /* Clear PCCARD interrupt Falling edge pending bit */
- __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_FALLING_EDGE);
- }
-
- /* Check PCCARD interrupt FIFO empty flag */
- if(__FMC_PCCARD_GET_FLAG(hpccard->Instance, FMC_FLAG_FEMPT))
- {
- /* PCCARD interrupt callback*/
- HAL_PCCARD_ITCallback(hpccard);
-
- /* Clear PCCARD interrupt FIFO empty pending bit */
- __FMC_PCCARD_CLEAR_FLAG(hpccard->Instance, FMC_FLAG_FEMPT);
- }
-}
-
-/**
- * @brief PCCARD interrupt feature callback
- * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
- * the configuration information for PCCARD module.
- * @retval None
- */
-__weak void HAL_PCCARD_ITCallback(PCCARD_HandleTypeDef *hpccard)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PCCARD_ITCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup PCCARD_Exported_Functions_Group3 State functions
- * @brief Peripheral State functions
- *
-@verbatim
- ==============================================================================
- ##### PCCARD State functions #####
- ==============================================================================
- [..]
- This subsection permits to get in run-time the status of the PCCARD controller
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief return the PCCARD controller state
- * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
- * the configuration information for PCCARD module.
- * @retval HAL state
- */
-HAL_PCCARD_StateTypeDef HAL_PCCARD_GetState(PCCARD_HandleTypeDef *hpccard)
-{
- return hpccard->State;
-}
-
-/**
- * @brief Get the compact flash memory status
- * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
- * the configuration information for PCCARD module.
- * @retval New status of the PCCARD operation. This parameter can be:
- * - CompactFlash_TIMEOUT_ERROR: when the previous operation generate
- * a Timeout error
- * - CompactFlash_READY: when memory is ready for the next operation
- */
-HAL_PCCARD_StatusTypeDef HAL_PCCARD_GetStatus(PCCARD_HandleTypeDef *hpccard)
-{
- uint32_t timeout = PCCARD_TIMEOUT_STATUS, status_pccard = 0;
-
- /* Check the PCCARD controller state */
- if(hpccard->State == HAL_PCCARD_STATE_BUSY)
- {
- return HAL_PCCARD_STATUS_ONGOING;
- }
-
- status_pccard = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
-
- while((status_pccard == PCCARD_BUSY) && timeout)
- {
- status_pccard = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
- timeout--;
- }
-
- if(timeout == 0)
- {
- status_pccard = PCCARD_TIMEOUT_ERROR;
- }
-
- /* Return the operation status */
- return (HAL_PCCARD_StatusTypeDef) status_pccard;
-}
-
-/**
- * @brief Reads the Compact Flash memory status using the Read status command
- * @param hpccard: pointer to a PCCARD_HandleTypeDef structure that contains
- * the configuration information for PCCARD module.
- * @retval The status of the Compact Flash memory. This parameter can be:
- * - CompactFlash_BUSY: when memory is busy
- * - CompactFlash_READY: when memory is ready for the next operation
- * - CompactFlash_ERROR: when the previous operation generates error
- */
-HAL_PCCARD_StatusTypeDef HAL_PCCARD_ReadStatus(PCCARD_HandleTypeDef *hpccard)
-{
- uint8_t data = 0, status_pccard = PCCARD_BUSY;
-
- /* Check the PCCARD controller state */
- if(hpccard->State == HAL_PCCARD_STATE_BUSY)
- {
- return HAL_PCCARD_STATUS_ONGOING;
- }
-
- /* Read status operation */
- data = *(__IO uint8_t *)(PCCARD_IO_SPACE_PRIMARY_ADDR | ATA_STATUS_CMD_ALTERNATE);
-
- if((data & PCCARD_TIMEOUT_ERROR) == PCCARD_TIMEOUT_ERROR)
- {
- status_pccard = PCCARD_TIMEOUT_ERROR;
- }
- else if((data & PCCARD_READY) == PCCARD_READY)
- {
- status_pccard = PCCARD_READY;
- }
-
- return (HAL_PCCARD_StatusTypeDef) status_pccard;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\
- STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-#endif /* HAL_PCCARD_MODULE_ENABLED */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c
deleted file mode 100644
index 21c5033..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd.c
+++ /dev/null
@@ -1,1208 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_pcd.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief PCD HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the USB Peripheral Controller:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral Control functions
- * + Peripheral State functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- The PCD HAL driver can be used as follows:
-
- (#) Declare a PCD_HandleTypeDef handle structure, for example:
- PCD_HandleTypeDef hpcd;
-
- (#) Fill parameters of Init structure in HCD handle
-
- (#) Call HAL_PCD_Init() API to initialize the PCD peripheral (Core, Device core, ...)
-
- (#) Initialize the PCD low level resources through the HAL_PCD_MspInit() API:
- (##) Enable the PCD/USB Low Level interface clock using
- (+++) __HAL_RCC_USB_OTG_FS_CLK_ENABLE();
- (+++) __HAL_RCC_USB_OTG_HS_CLK_ENABLE(); (For High Speed Mode)
-
- (##) Initialize the related GPIO clocks
- (##) Configure PCD pin-out
- (##) Configure PCD NVIC interrupt
-
- (#)Associate the Upper USB device stack to the HAL PCD Driver:
- (##) hpcd.pData = pdev;
-
- (#)Enable PCD transmission and reception:
- (##) HAL_PCD_Start();
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup PCD PCD
- * @brief PCD HAL module driver
- * @{
- */
-
-#ifdef HAL_PCD_MODULE_ENABLED
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-/** @defgroup PCD_Private_Macros PCD Private Macros
- * @{
- */
-#define PCD_MIN(a, b) (((a) < (b)) ? (a) : (b))
-#define PCD_MAX(a, b) (((a) > (b)) ? (a) : (b))
-/**
- * @}
- */
-
-/* Private functions prototypes ----------------------------------------------*/
-/** @defgroup PCD_Private_Functions PCD Private Functions
- * @{
- */
-static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum);
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup PCD_Exported_Functions PCD Exported Functions
- * @{
- */
-
-/** @defgroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the PCD according to the specified
- * parameters in the PCD_InitTypeDef and initialize the associated handle.
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd)
-{
- uint32_t i = 0;
-
- /* Check the PCD handle allocation */
- if(hpcd == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_PCD_ALL_INSTANCE(hpcd->Instance));
-
- hpcd->State = HAL_PCD_STATE_BUSY;
-
- /* Init the low level hardware : GPIO, CLOCK, NVIC... */
- HAL_PCD_MspInit(hpcd);
-
- /* Disable the Interrupts */
- __HAL_PCD_DISABLE(hpcd);
-
- /*Init the Core (common init.) */
- USB_CoreInit(hpcd->Instance, hpcd->Init);
-
- /* Force Device Mode*/
- USB_SetCurrentMode(hpcd->Instance , USB_OTG_DEVICE_MODE);
-
- /* Init endpoints structures */
- for (i = 0; i < 15 ; i++)
- {
- /* Init ep structure */
- hpcd->IN_ep[i].is_in = 1;
- hpcd->IN_ep[i].num = i;
- hpcd->IN_ep[i].tx_fifo_num = i;
- /* Control until ep is activated */
- hpcd->IN_ep[i].type = EP_TYPE_CTRL;
- hpcd->IN_ep[i].maxpacket = 0;
- hpcd->IN_ep[i].xfer_buff = 0;
- hpcd->IN_ep[i].xfer_len = 0;
- }
-
- for (i = 0; i < 15 ; i++)
- {
- hpcd->OUT_ep[i].is_in = 0;
- hpcd->OUT_ep[i].num = i;
- hpcd->IN_ep[i].tx_fifo_num = i;
- /* Control until ep is activated */
- hpcd->OUT_ep[i].type = EP_TYPE_CTRL;
- hpcd->OUT_ep[i].maxpacket = 0;
- hpcd->OUT_ep[i].xfer_buff = 0;
- hpcd->OUT_ep[i].xfer_len = 0;
-
- hpcd->Instance->DIEPTXF[i] = 0;
- }
-
- /* Init Device */
- USB_DevInit(hpcd->Instance, hpcd->Init);
-
- hpcd->State= HAL_PCD_STATE_READY;
-
-#ifdef USB_OTG_GLPMCFG_LPMEN
- /* Activate LPM */
- if (hpcd->Init.lpm_enable == 1)
- {
- HAL_PCDEx_ActivateLPM(hpcd);
- }
-#endif /* USB_OTG_GLPMCFG_LPMEN */
-
- USB_DevDisconnect (hpcd->Instance);
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the PCD peripheral.
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd)
-{
- /* Check the PCD handle allocation */
- if(hpcd == NULL)
- {
- return HAL_ERROR;
- }
-
- hpcd->State = HAL_PCD_STATE_BUSY;
-
- /* Stop Device */
- HAL_PCD_Stop(hpcd);
-
- /* DeInit the low level hardware */
- HAL_PCD_MspDeInit(hpcd);
-
- hpcd->State = HAL_PCD_STATE_RESET;
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the PCD MSP.
- * @param hpcd: PCD handle
- * @retval None
- */
-__weak void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PCD_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes PCD MSP.
- * @param hpcd: PCD handle
- * @retval None
- */
-__weak void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PCD_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup PCD_Exported_Functions_Group2 Input and Output operation functions
- * @brief Data transfers functions
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to manage the PCD data
- transfers.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Start The USB OTG Device.
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd)
-{
- __HAL_LOCK(hpcd);
- USB_DevConnect (hpcd->Instance);
- __HAL_PCD_ENABLE(hpcd);
- __HAL_UNLOCK(hpcd);
- return HAL_OK;
-}
-
-/**
- * @brief Stop The USB OTG Device.
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd)
-{
- __HAL_LOCK(hpcd);
- __HAL_PCD_DISABLE(hpcd);
- USB_StopDevice(hpcd->Instance);
- USB_DevDisconnect(hpcd->Instance);
- __HAL_UNLOCK(hpcd);
- return HAL_OK;
-}
-
-/**
- * @brief Handles PCD interrupt request.
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd)
-{
- USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
- uint32_t i = 0, ep_intr = 0, epint = 0, epnum = 0;
- uint32_t fifoemptymsk = 0, temp = 0;
- USB_OTG_EPTypeDef *ep;
-
- /* ensure that we are in device mode */
- if (USB_GetMode(hpcd->Instance) == USB_OTG_MODE_DEVICE)
- {
- /* avoid spurious interrupt */
- if(__HAL_PCD_IS_INVALID_INTERRUPT(hpcd))
- {
- return;
- }
-
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_MMIS))
- {
- /* incorrect mode, acknowledge the interrupt */
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_MMIS);
- }
-
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OEPINT))
- {
- epnum = 0;
-
- /* Read in the device interrupt bits */
- ep_intr = USB_ReadDevAllOutEpInterrupt(hpcd->Instance);
-
- while ( ep_intr )
- {
- if (ep_intr & 0x1)
- {
- epint = USB_ReadDevOutEPInterrupt(hpcd->Instance, epnum);
-
- if(( epint & USB_OTG_DOEPINT_XFRC) == USB_OTG_DOEPINT_XFRC)
- {
- CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_XFRC);
-
- if(hpcd->Init.dma_enable == 1)
- {
- hpcd->OUT_ep[epnum].xfer_count = hpcd->OUT_ep[epnum].maxpacket- (USBx_OUTEP(epnum)->DOEPTSIZ & USB_OTG_DOEPTSIZ_XFRSIZ);
- hpcd->OUT_ep[epnum].xfer_buff += hpcd->OUT_ep[epnum].maxpacket;
- }
-
- HAL_PCD_DataOutStageCallback(hpcd, epnum);
- if(hpcd->Init.dma_enable == 1)
- {
- if((epnum == 0) && (hpcd->OUT_ep[epnum].xfer_len == 0))
- {
- /* this is ZLP, so prepare EP0 for next setup */
- USB_EP0_OutStart(hpcd->Instance, 1, (uint8_t *)hpcd->Setup);
- }
- }
- }
-
- if(( epint & USB_OTG_DOEPINT_STUP) == USB_OTG_DOEPINT_STUP)
- {
- /* Inform the upper layer that a setup packet is available */
- HAL_PCD_SetupStageCallback(hpcd);
- CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_STUP);
- }
-
- if(( epint & USB_OTG_DOEPINT_OTEPDIS) == USB_OTG_DOEPINT_OTEPDIS)
- {
- CLEAR_OUT_EP_INTR(epnum, USB_OTG_DOEPINT_OTEPDIS);
- }
- }
- epnum++;
- ep_intr >>= 1;
- }
- }
-
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IEPINT))
- {
- /* Read in the device interrupt bits */
- ep_intr = USB_ReadDevAllInEpInterrupt(hpcd->Instance);
-
- epnum = 0;
-
- while ( ep_intr )
- {
- if (ep_intr & 0x1) /* In ITR */
- {
- epint = USB_ReadDevInEPInterrupt(hpcd->Instance, epnum);
-
- if(( epint & USB_OTG_DIEPINT_XFRC) == USB_OTG_DIEPINT_XFRC)
- {
- fifoemptymsk = 0x1 << epnum;
- USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk;
-
- CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_XFRC);
-
- if (hpcd->Init.dma_enable == 1)
- {
- hpcd->IN_ep[epnum].xfer_buff += hpcd->IN_ep[epnum].maxpacket;
- }
-
- HAL_PCD_DataInStageCallback(hpcd, epnum);
-
- if (hpcd->Init.dma_enable == 1)
- {
- /* this is ZLP, so prepare EP0 for next setup */
- if((epnum == 0) && (hpcd->IN_ep[epnum].xfer_len == 0))
- {
- /* prepare to rx more setup packets */
- USB_EP0_OutStart(hpcd->Instance, 1, (uint8_t *)hpcd->Setup);
- }
- }
- }
- if(( epint & USB_OTG_DIEPINT_TOC) == USB_OTG_DIEPINT_TOC)
- {
- CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_TOC);
- }
- if(( epint & USB_OTG_DIEPINT_ITTXFE) == USB_OTG_DIEPINT_ITTXFE)
- {
- CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_ITTXFE);
- }
- if(( epint & USB_OTG_DIEPINT_INEPNE) == USB_OTG_DIEPINT_INEPNE)
- {
- CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_INEPNE);
- }
- if(( epint & USB_OTG_DIEPINT_EPDISD) == USB_OTG_DIEPINT_EPDISD)
- {
- CLEAR_IN_EP_INTR(epnum, USB_OTG_DIEPINT_EPDISD);
- }
- if(( epint & USB_OTG_DIEPINT_TXFE) == USB_OTG_DIEPINT_TXFE)
- {
- PCD_WriteEmptyTxFifo(hpcd , epnum);
- }
- }
- epnum++;
- ep_intr >>= 1;
- }
- }
-
- /* Handle Resume Interrupt */
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT))
- {
- /* Clear the Remote Wake-up Signaling */
- USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG;
-
-#ifdef USB_OTG_GLPMCFG_LPMEN
- if(hpcd->LPM_State == LPM_L1)
- {
- hpcd->LPM_State = LPM_L0;
- HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L0_ACTIVE);
- }
- else
-#endif /* USB_OTG_GLPMCFG_LPMEN */
- {
- HAL_PCD_ResumeCallback(hpcd);
- }
-
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_WKUINT);
- }
-
- /* Handle Suspend Interrupt */
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP))
- {
- if((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS)
- {
-
- HAL_PCD_SuspendCallback(hpcd);
- }
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBSUSP);
- }
-
-#ifdef USB_OTG_GLPMCFG_LPMEN
- /* Handle LPM Interrupt */
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT))
- {
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_LPMINT);
- if( hpcd->LPM_State == LPM_L0)
- {
- hpcd->LPM_State = LPM_L1;
- hpcd->BESL = (hpcd->Instance->GLPMCFG & USB_OTG_GLPMCFG_BESL) >>2 ;
- HAL_PCDEx_LPM_Callback(hpcd, PCD_LPM_L1_ACTIVE);
- }
- else
- {
- HAL_PCD_SuspendCallback(hpcd);
- }
- }
-#endif /* USB_OTG_GLPMCFG_LPMEN */
-
- /* Handle Reset Interrupt */
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_USBRST))
- {
- USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_RWUSIG;
- USB_FlushTxFifo(hpcd->Instance , 0 );
-
- for (i = 0; i < hpcd->Init.dev_endpoints ; i++)
- {
- USBx_INEP(i)->DIEPINT = 0xFF;
- USBx_OUTEP(i)->DOEPINT = 0xFF;
- }
- USBx_DEVICE->DAINT = 0xFFFFFFFF;
- USBx_DEVICE->DAINTMSK |= 0x10001;
-
- if(hpcd->Init.use_dedicated_ep1)
- {
- USBx_DEVICE->DOUTEP1MSK |= (USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM);
- USBx_DEVICE->DINEP1MSK |= (USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM | USB_OTG_DIEPMSK_EPDM);
- }
- else
- {
- USBx_DEVICE->DOEPMSK |= (USB_OTG_DOEPMSK_STUPM | USB_OTG_DOEPMSK_XFRCM | USB_OTG_DOEPMSK_EPDM);
- USBx_DEVICE->DIEPMSK |= (USB_OTG_DIEPMSK_TOM | USB_OTG_DIEPMSK_XFRCM | USB_OTG_DIEPMSK_EPDM);
- }
-
- /* Set Default Address to 0 */
- USBx_DEVICE->DCFG &= ~USB_OTG_DCFG_DAD;
-
- /* setup EP0 to receive SETUP packets */
- USB_EP0_OutStart(hpcd->Instance, hpcd->Init.dma_enable, (uint8_t *)hpcd->Setup);
-
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_USBRST);
- }
-
- /* Handle Enumeration done Interrupt */
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE))
- {
- USB_ActivateSetup(hpcd->Instance);
- hpcd->Instance->GUSBCFG &= ~USB_OTG_GUSBCFG_TRDT;
-
- if ( USB_GetDevSpeed(hpcd->Instance) == USB_OTG_SPEED_HIGH)
- {
- hpcd->Init.speed = USB_OTG_SPEED_HIGH;
- hpcd->Init.ep0_mps = USB_OTG_HS_MAX_PACKET_SIZE ;
- hpcd->Instance->GUSBCFG |= (uint32_t)((USBD_HS_TRDT_VALUE << 10) & USB_OTG_GUSBCFG_TRDT);
- }
- else
- {
- hpcd->Init.speed = USB_OTG_SPEED_FULL;
- hpcd->Init.ep0_mps = USB_OTG_FS_MAX_PACKET_SIZE ;
- hpcd->Instance->GUSBCFG |= (uint32_t)((USBD_FS_TRDT_VALUE << 10) & USB_OTG_GUSBCFG_TRDT);
- }
-
- HAL_PCD_ResetCallback(hpcd);
-
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_ENUMDNE);
- }
-
- /* Handle RxQLevel Interrupt */
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_RXFLVL))
- {
- USB_MASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL);
-
- temp = USBx->GRXSTSP;
-
- ep = &hpcd->OUT_ep[temp & USB_OTG_GRXSTSP_EPNUM];
-
- if(((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_DATA_UPDT)
- {
- if((temp & USB_OTG_GRXSTSP_BCNT) != 0)
- {
- USB_ReadPacket(USBx, ep->xfer_buff, (temp & USB_OTG_GRXSTSP_BCNT) >> 4);
- ep->xfer_buff += (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
- ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
- }
- }
- else if (((temp & USB_OTG_GRXSTSP_PKTSTS) >> 17) == STS_SETUP_UPDT)
- {
- USB_ReadPacket(USBx, (uint8_t *)hpcd->Setup, 8);
- ep->xfer_count += (temp & USB_OTG_GRXSTSP_BCNT) >> 4;
- }
- USB_UNMASK_INTERRUPT(hpcd->Instance, USB_OTG_GINTSTS_RXFLVL);
- }
-
- /* Handle SOF Interrupt */
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SOF))
- {
- HAL_PCD_SOFCallback(hpcd);
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SOF);
- }
-
- /* Handle Incomplete ISO IN Interrupt */
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR))
- {
- HAL_PCD_ISOINIncompleteCallback(hpcd, epnum);
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_IISOIXFR);
- }
-
- /* Handle Incomplete ISO OUT Interrupt */
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT))
- {
- HAL_PCD_ISOOUTIncompleteCallback(hpcd, epnum);
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_PXFR_INCOMPISOOUT);
- }
-
- /* Handle Connection event Interrupt */
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT))
- {
- HAL_PCD_ConnectCallback(hpcd);
- __HAL_PCD_CLEAR_FLAG(hpcd, USB_OTG_GINTSTS_SRQINT);
- }
-
- /* Handle Disconnection event Interrupt */
- if(__HAL_PCD_GET_FLAG(hpcd, USB_OTG_GINTSTS_OTGINT))
- {
- temp = hpcd->Instance->GOTGINT;
-
- if((temp & USB_OTG_GOTGINT_SEDET) == USB_OTG_GOTGINT_SEDET)
- {
- HAL_PCD_DisconnectCallback(hpcd);
- }
- hpcd->Instance->GOTGINT |= temp;
- }
- }
-}
-
-/**
- * @brief Data OUT stage callback.
- * @param hpcd: PCD handle
- * @param epnum: endpoint number
- * @retval None
- */
- __weak void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PCD_DataOutStageCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Data IN stage callback.
- * @param hpcd: PCD handle
- * @param epnum: endpoint number
- * @retval None
- */
- __weak void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PCD_DataInStageCallback could be implemented in the user file
- */
-}
-/**
- * @brief Setup stage callback.
- * @param hpcd: PCD handle
- * @retval None
- */
- __weak void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PCD_SetupStageCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief USB Start Of Frame callback.
- * @param hpcd: PCD handle
- * @retval None
- */
- __weak void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PCD_SOFCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief USB Reset callback.
- * @param hpcd: PCD handle
- * @retval None
- */
- __weak void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PCD_ResetCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Suspend event callback.
- * @param hpcd: PCD handle
- * @retval None
- */
- __weak void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PCD_SuspendCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Resume event callback.
- * @param hpcd: PCD handle
- * @retval None
- */
- __weak void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PCD_ResumeCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Incomplete ISO OUT callback.
- * @param hpcd: PCD handle
- * @param epnum: endpoint number
- * @retval None
- */
- __weak void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PCD_ISOOUTIncompleteCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Incomplete ISO IN callback.
- * @param hpcd: PCD handle
- * @param epnum: endpoint number
- * @retval None
- */
- __weak void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PCD_ISOINIncompleteCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Connection event callback.
- * @param hpcd: PCD handle
- * @retval None
- */
- __weak void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PCD_ConnectCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Disconnection event callback.
- * @param hpcd: PCD handle
- * @retval None
- */
- __weak void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PCD_DisconnectCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup PCD_Exported_Functions_Group3 Peripheral Control functions
- * @brief management functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Control functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to control the PCD data
- transfers.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Connect the USB device.
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd)
-{
- __HAL_LOCK(hpcd);
- USB_DevConnect(hpcd->Instance);
- __HAL_UNLOCK(hpcd);
- return HAL_OK;
-}
-
-/**
- * @brief Disconnect the USB device.
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd)
-{
- __HAL_LOCK(hpcd);
- USB_DevDisconnect(hpcd->Instance);
- __HAL_UNLOCK(hpcd);
- return HAL_OK;
-}
-
-/**
- * @brief Set the USB Device address.
- * @param hpcd: PCD handle
- * @param address: new device address
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address)
-{
- __HAL_LOCK(hpcd);
- USB_SetDevAddress(hpcd->Instance, address);
- __HAL_UNLOCK(hpcd);
- return HAL_OK;
-}
-/**
- * @brief Open and configure an endpoint.
- * @param hpcd: PCD handle
- * @param ep_addr: endpoint address
- * @param ep_mps: endpoint max packet size
- * @param ep_type: endpoint type
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type)
-{
- HAL_StatusTypeDef ret = HAL_OK;
- USB_OTG_EPTypeDef *ep;
-
- if ((ep_addr & 0x80) == 0x80)
- {
- ep = &hpcd->IN_ep[ep_addr & 0x7F];
- }
- else
- {
- ep = &hpcd->OUT_ep[ep_addr & 0x7F];
- }
- ep->num = ep_addr & 0x7F;
-
- ep->is_in = (0x80 & ep_addr) != 0;
- ep->maxpacket = ep_mps;
- ep->type = ep_type;
- if (ep->is_in)
- {
- /* Assign a Tx FIFO */
- ep->tx_fifo_num = ep->num;
- }
- /* Set initial data PID. */
- if (ep_type == EP_TYPE_BULK )
- {
- ep->data_pid_start = 0;
- }
-
- __HAL_LOCK(hpcd);
- USB_ActivateEndpoint(hpcd->Instance , ep);
- __HAL_UNLOCK(hpcd);
- return ret;
-}
-
-
-/**
- * @brief Deactivate an endpoint.
- * @param hpcd: PCD handle
- * @param ep_addr: endpoint address
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
-{
- USB_OTG_EPTypeDef *ep;
-
- if ((ep_addr & 0x80) == 0x80)
- {
- ep = &hpcd->IN_ep[ep_addr & 0x7F];
- }
- else
- {
- ep = &hpcd->OUT_ep[ep_addr & 0x7F];
- }
- ep->num = ep_addr & 0x7F;
-
- ep->is_in = (0x80 & ep_addr) != 0;
-
- __HAL_LOCK(hpcd);
- USB_DeactivateEndpoint(hpcd->Instance , ep);
- __HAL_UNLOCK(hpcd);
- return HAL_OK;
-}
-
-
-/**
- * @brief Receive an amount of data.
- * @param hpcd: PCD handle
- * @param ep_addr: endpoint address
- * @param pBuf: pointer to the reception buffer
- * @param len: amount of data to be received
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len)
-{
- USB_OTG_EPTypeDef *ep;
-
- ep = &hpcd->OUT_ep[ep_addr & 0x7F];
-
- /*setup and start the Xfer */
- ep->xfer_buff = pBuf;
- ep->xfer_len = len;
- ep->xfer_count = 0;
- ep->is_in = 0;
- ep->num = ep_addr & 0x7F;
-
- if (hpcd->Init.dma_enable == 1)
- {
- ep->dma_addr = (uint32_t)pBuf;
- }
-
- __HAL_LOCK(hpcd);
-
- if ((ep_addr & 0x7F) == 0 )
- {
- USB_EP0StartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
- }
- else
- {
- USB_EPStartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
- }
- __HAL_UNLOCK(hpcd);
-
- return HAL_OK;
-}
-
-/**
- * @brief Get Received Data Size.
- * @param hpcd: PCD handle
- * @param ep_addr: endpoint address
- * @retval Data Size
- */
-uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
-{
- return hpcd->OUT_ep[ep_addr & 0x7F].xfer_count;
-}
-/**
- * @brief Send an amount of data.
- * @param hpcd: PCD handle
- * @param ep_addr: endpoint address
- * @param pBuf: pointer to the transmission buffer
- * @param len: amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len)
-{
- USB_OTG_EPTypeDef *ep;
-
- ep = &hpcd->IN_ep[ep_addr & 0x7F];
-
- /*setup and start the Xfer */
- ep->xfer_buff = pBuf;
- ep->xfer_len = len;
- ep->xfer_count = 0;
- ep->is_in = 1;
- ep->num = ep_addr & 0x7F;
-
- if (hpcd->Init.dma_enable == 1)
- {
- ep->dma_addr = (uint32_t)pBuf;
- }
-
- __HAL_LOCK(hpcd);
-
- if ((ep_addr & 0x7F) == 0 )
- {
- USB_EP0StartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
- }
- else
- {
- USB_EPStartXfer(hpcd->Instance , ep, hpcd->Init.dma_enable);
- }
-
- __HAL_UNLOCK(hpcd);
-
- return HAL_OK;
-}
-
-/**
- * @brief Set a STALL condition over an endpoint.
- * @param hpcd: PCD handle
- * @param ep_addr: endpoint address
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
-{
- USB_OTG_EPTypeDef *ep;
-
- if ((0x80 & ep_addr) == 0x80)
- {
- ep = &hpcd->IN_ep[ep_addr & 0x7F];
- }
- else
- {
- ep = &hpcd->OUT_ep[ep_addr];
- }
-
- ep->is_stall = 1;
- ep->num = ep_addr & 0x7F;
- ep->is_in = ((ep_addr & 0x80) == 0x80);
-
-
- __HAL_LOCK(hpcd);
- USB_EPSetStall(hpcd->Instance , ep);
- if((ep_addr & 0x7F) == 0)
- {
- USB_EP0_OutStart(hpcd->Instance, hpcd->Init.dma_enable, (uint8_t *)hpcd->Setup);
- }
- __HAL_UNLOCK(hpcd);
-
- return HAL_OK;
-}
-
-/**
- * @brief Clear a STALL condition over in an endpoint.
- * @param hpcd: PCD handle
- * @param ep_addr: endpoint address
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
-{
- USB_OTG_EPTypeDef *ep;
-
- if ((0x80 & ep_addr) == 0x80)
- {
- ep = &hpcd->IN_ep[ep_addr & 0x7F];
- }
- else
- {
- ep = &hpcd->OUT_ep[ep_addr];
- }
-
- ep->is_stall = 0;
- ep->num = ep_addr & 0x7F;
- ep->is_in = ((ep_addr & 0x80) == 0x80);
-
- __HAL_LOCK(hpcd);
- USB_EPClearStall(hpcd->Instance , ep);
- __HAL_UNLOCK(hpcd);
-
- return HAL_OK;
-}
-
-/**
- * @brief Flush an endpoint.
- * @param hpcd: PCD handle
- * @param ep_addr: endpoint address
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr)
-{
- __HAL_LOCK(hpcd);
-
- if ((ep_addr & 0x80) == 0x80)
- {
- USB_FlushTxFifo(hpcd->Instance, ep_addr & 0x7F);
- }
- else
- {
- USB_FlushRxFifo(hpcd->Instance);
- }
-
- __HAL_UNLOCK(hpcd);
-
- return HAL_OK;
-}
-
-/**
- * @brief Activate remote wakeup signalling.
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd)
-{
- USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
-
- if((USBx_DEVICE->DSTS & USB_OTG_DSTS_SUSPSTS) == USB_OTG_DSTS_SUSPSTS)
- {
- /* Activate Remote wakeup signaling */
- USBx_DEVICE->DCTL |= USB_OTG_DCTL_RWUSIG;
- }
- return HAL_OK;
-}
-
-/**
- * @brief De-activate remote wakeup signalling.
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd)
-{
- USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
-
- /* De-activate Remote wakeup signaling */
- USBx_DEVICE->DCTL &= ~(USB_OTG_DCTL_RWUSIG);
- return HAL_OK;
-}
-/**
- * @}
- */
-
-/** @defgroup PCD_Exported_Functions_Group4 Peripheral State functions
- * @brief Peripheral State functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral State functions #####
- ===============================================================================
- [..]
- This subsection permits to get in run-time the status of the peripheral
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Return the PCD handle state.
- * @param hpcd: PCD handle
- * @retval HAL state
- */
-PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd)
-{
- return hpcd->State;
-}
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Private functions ---------------------------------------------------------*/
-/** @addtogroup PCD_Private_Functions
- * @{
- */
-
-/**
- * @brief Check FIFO for the next packet to be loaded.
- * @param hpcd: PCD handle
- * @param epnum : endpoint number
- * @retval HAL status
- */
-static HAL_StatusTypeDef PCD_WriteEmptyTxFifo(PCD_HandleTypeDef *hpcd, uint32_t epnum)
-{
- USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
- USB_OTG_EPTypeDef *ep;
- int32_t len = 0;
- uint32_t len32b;
- uint32_t fifoemptymsk = 0;
-
- ep = &hpcd->IN_ep[epnum];
- len = ep->xfer_len - ep->xfer_count;
-
- if (len > ep->maxpacket)
- {
- len = ep->maxpacket;
- }
-
-
- len32b = (len + 3) / 4;
-
- while ( (USBx_INEP(epnum)->DTXFSTS & USB_OTG_DTXFSTS_INEPTFSAV) > len32b &&
- ep->xfer_count < ep->xfer_len &&
- ep->xfer_len != 0)
- {
- /* Write the FIFO */
- len = ep->xfer_len - ep->xfer_count;
-
- if (len > ep->maxpacket)
- {
- len = ep->maxpacket;
- }
- len32b = (len + 3) / 4;
-
- USB_WritePacket(USBx, ep->xfer_buff, epnum, len, hpcd->Init.dma_enable);
-
- ep->xfer_buff += len;
- ep->xfer_count += len;
- }
-
- if(len <= 0)
- {
- fifoemptymsk = 0x1 << epnum;
- USBx_DEVICE->DIEPEMPMSK &= ~fifoemptymsk;
-
- }
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-#endif /* HAL_PCD_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c
deleted file mode 100644
index 46f0ad3..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pcd_ex.c
+++ /dev/null
@@ -1,198 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_pcd_ex.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief PCD HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the USB Peripheral Controller:
- * + Extended features functions
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup PCDEx PCDEx
- * @brief PCD Extended HAL module driver
- * @{
- */
-#ifdef HAL_PCD_MODULE_ENABLED
-
-/* Private types -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/* Private macros ------------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-
-/** @defgroup PCDEx_Exported_Functions PCD Extended Exported Functions
- * @{
- */
-
-/** @defgroup PCDEx_Exported_Functions_Group1 Peripheral Control functions
- * @brief PCDEx control functions
- *
-@verbatim
- ===============================================================================
- ##### Extended features functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Update FIFO configuration
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Set Tx FIFO
- * @param hpcd: PCD handle
- * @param fifo: The number of Tx fifo
- * @param size: Fifo size
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size)
-{
- uint8_t i = 0;
- uint32_t Tx_Offset = 0;
-
- /* TXn min size = 16 words. (n : Transmit FIFO index)
- When a TxFIFO is not used, the Configuration should be as follows:
- case 1 : n > m and Txn is not used (n,m : Transmit FIFO indexes)
- --> Txm can use the space allocated for Txn.
- case2 : n < m and Txn is not used (n,m : Transmit FIFO indexes)
- --> Txn should be configured with the minimum space of 16 words
- The FIFO is used optimally when used TxFIFOs are allocated in the top
- of the FIFO.Ex: use EP1 and EP2 as IN instead of EP1 and EP3 as IN ones.
- When DMA is used 3n * FIFO locations should be reserved for internal DMA registers */
-
- Tx_Offset = hpcd->Instance->GRXFSIZ;
-
- if(fifo == 0)
- {
- hpcd->Instance->DIEPTXF0_HNPTXFSIZ = (uint32_t)(((uint32_t)size << 16) | Tx_Offset);
- }
- else
- {
- Tx_Offset += (hpcd->Instance->DIEPTXF0_HNPTXFSIZ) >> 16;
- for (i = 0; i < (fifo - 1); i++)
- {
- Tx_Offset += (hpcd->Instance->DIEPTXF[i] >> 16);
- }
-
- /* Multiply Tx_Size by 2 to get higher performance */
- hpcd->Instance->DIEPTXF[fifo - 1] = (uint32_t)(((uint32_t)size << 16) | Tx_Offset);
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Set Rx FIFO
- * @param hpcd: PCD handle
- * @param size: Size of Rx fifo
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size)
-{
- hpcd->Instance->GRXFSIZ = size;
-
- return HAL_OK;
-}
-
-#if defined(STM32F446xx)
-/**
- * @brief Activate LPM feature
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd)
-{
- USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
-
- hpcd->lpm_active = ENABLE;
- hpcd->LPM_State = LPM_L0;
- USBx->GINTMSK |= USB_OTG_GINTMSK_LPMINTM;
- USBx->GLPMCFG |= (USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL);
-
- return HAL_OK;
-}
-
-/**
- * @brief Deactivate LPM feature.
- * @param hpcd: PCD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd)
-{
- USB_OTG_GlobalTypeDef *USBx = hpcd->Instance;
-
- hpcd->lpm_active = DISABLE;
- USBx->GINTMSK &= ~USB_OTG_GINTMSK_LPMINTM;
- USBx->GLPMCFG &= ~(USB_OTG_GLPMCFG_LPMEN | USB_OTG_GLPMCFG_LPMACK | USB_OTG_GLPMCFG_ENBESL);
-
- return HAL_OK;
-}
-
-/**
- * @brief Send LPM message to user layer callback.
- * @param hpcd: PCD handle
- * @param msg: LPM message
- * @retval HAL status
- */
-__weak void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg)
-{
-}
-#endif /* STM32F446xx */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_PCD_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c
deleted file mode 100644
index faa35da..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr.c
+++ /dev/null
@@ -1,574 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_pwr.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief PWR HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Power Controller (PWR) peripheral:
- * + Initialization and de-initialization functions
- * + Peripheral Control functions
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup PWR PWR
- * @brief PWR HAL module driver
- * @{
- */
-
-#ifdef HAL_PWR_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @addtogroup PWR_Private_Constants
- * @{
- */
-
-/** @defgroup PWR_PVD_Mode_Mask PWR PVD Mode Mask
- * @{
- */
-#define PVD_MODE_IT ((uint32_t)0x00010000)
-#define PVD_MODE_EVT ((uint32_t)0x00020000)
-#define PVD_RISING_EDGE ((uint32_t)0x00000001)
-#define PVD_FALLING_EDGE ((uint32_t)0x00000002)
-/**
- * @}
- */
-
-/**
- * @}
- */
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup PWR_Exported_Functions PWR Exported Functions
- * @{
- */
-
-/** @defgroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and de-initialization functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..]
- After reset, the backup domain (RTC registers, RTC backup data
- registers and backup SRAM) is protected against possible unwanted
- write accesses.
- To enable access to the RTC Domain and RTC registers, proceed as follows:
- (+) Enable the Power Controller (PWR) APB1 interface clock using the
- __HAL_RCC_PWR_CLK_ENABLE() macro.
- (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Deinitializes the HAL PWR peripheral registers to their default reset values.
- * @retval None
- */
-void HAL_PWR_DeInit(void)
-{
- __HAL_RCC_PWR_FORCE_RESET();
- __HAL_RCC_PWR_RELEASE_RESET();
-}
-
-/**
- * @brief Enables access to the backup domain (RTC registers, RTC
- * backup data registers and backup SRAM).
- * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
- * Backup Domain Access should be kept enabled.
- * @retval None
- */
-void HAL_PWR_EnableBkUpAccess(void)
-{
- *(__IO uint32_t *) CR_DBP_BB = (uint32_t)ENABLE;
-}
-
-/**
- * @brief Disables access to the backup domain (RTC registers, RTC
- * backup data registers and backup SRAM).
- * @note If the HSE divided by 2, 3, ..31 is used as the RTC clock, the
- * Backup Domain Access should be kept enabled.
- * @retval None
- */
-void HAL_PWR_DisableBkUpAccess(void)
-{
- *(__IO uint32_t *) CR_DBP_BB = (uint32_t)DISABLE;
-}
-
-/**
- * @}
- */
-
-/** @defgroup PWR_Exported_Functions_Group2 Peripheral Control functions
- * @brief Low Power modes configuration functions
- *
-@verbatim
-
- ===============================================================================
- ##### Peripheral Control functions #####
- ===============================================================================
-
- *** PVD configuration ***
- =========================
- [..]
- (+) The PVD is used to monitor the VDD power supply by comparing it to a
- threshold selected by the PVD Level (PLS[2:0] bits in the PWR_CR).
- (+) A PVDO flag is available to indicate if VDD/VDDA is higher or lower
- than the PVD threshold. This event is internally connected to the EXTI
- line16 and can generate an interrupt if enabled. This is done through
- __HAL_PWR_PVD_EXTI_ENABLE_IT() macro.
- (+) The PVD is stopped in Standby mode.
-
- *** Wake-up pin configuration ***
- ================================
- [..]
- (+) Wake-up pin is used to wake up the system from Standby mode. This pin is
- forced in input pull-down configuration and is active on rising edges.
- (+) There is one Wake-up pin: Wake-up Pin 1 on PA.00.
- Only for STM32F446xx there are two Wake-Up pins: Pin1 on PA.00 and Pin 2 on PC.13
-
- *** Low Power modes configuration ***
- =====================================
- [..]
- The devices feature 3 low-power modes:
- (+) Sleep mode: Cortex-M4 core stopped, peripherals kept running.
- (+) Stop mode: all clocks are stopped, regulator running, regulator
- in low power mode
- (+) Standby mode: 1.2V domain powered off.
-
- *** Sleep mode ***
- ==================
- [..]
- (+) Entry:
- The Sleep mode is entered by using the HAL_PWR_EnterSLEEPMode(PWR_MAINREGULATOR_ON, PWR_SLEEPENTRY_WFI)
- functions with
- (++) PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
- (++) PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
-
- -@@- The Regulator parameter is not used for the STM32F4 family
- and is kept as parameter just to maintain compatibility with the
- lower power families (STM32L).
- (+) Exit:
- Any peripheral interrupt acknowledged by the nested vectored interrupt
- controller (NVIC) can wake up the device from Sleep mode.
-
- *** Stop mode ***
- =================
- [..]
- In Stop mode, all clocks in the 1.2V domain are stopped, the PLL, the HSI,
- and the HSE RC oscillators are disabled. Internal SRAM and register contents
- are preserved.
- The voltage regulator can be configured either in normal or low-power mode.
- To minimize the consumption In Stop mode, FLASH can be powered off before
- entering the Stop mode using the HAL_PWREx_EnableFlashPowerDown() function.
- It can be switched on again by software after exiting the Stop mode using
- the HAL_PWREx_DisableFlashPowerDown() function.
-
- (+) Entry:
- The Stop mode is entered using the HAL_PWR_EnterSTOPMode(PWR_MAINREGULATOR_ON)
- function with:
- (++) Main regulator ON.
- (++) Low Power regulator ON.
- (+) Exit:
- Any EXTI Line (Internal or External) configured in Interrupt/Event mode.
-
- *** Standby mode ***
- ====================
- [..]
- (+)
- The Standby mode allows to achieve the lowest power consumption. It is based
- on the Cortex-M4 deep sleep mode, with the voltage regulator disabled.
- The 1.2V domain is consequently powered off. The PLL, the HSI oscillator and
- the HSE oscillator are also switched off. SRAM and register contents are lost
- except for the RTC registers, RTC backup registers, backup SRAM and Standby
- circuitry.
-
- The voltage regulator is OFF.
-
- (++) Entry:
- (+++) The Standby mode is entered using the HAL_PWR_EnterSTANDBYMode() function.
- (++) Exit:
- (+++) WKUP pin rising edge, RTC alarm (Alarm A and Alarm B), RTC wake-up,
- tamper event, time-stamp event, external reset in NRST pin, IWDG reset.
-
- *** Auto-wake-up (AWU) from low-power mode ***
- =============================================
- [..]
-
- (+) The MCU can be woken up from low-power mode by an RTC Alarm event, an RTC
- Wake-up event, a tamper event or a time-stamp event, without depending on
- an external interrupt (Auto-wake-up mode).
-
- (+) RTC auto-wake-up (AWU) from the Stop and Standby modes
-
- (++) To wake up from the Stop mode with an RTC alarm event, it is necessary to
- configure the RTC to generate the RTC alarm using the HAL_RTC_SetAlarm_IT() function.
-
- (++) To wake up from the Stop mode with an RTC Tamper or time stamp event, it
- is necessary to configure the RTC to detect the tamper or time stamp event using the
- HAL_RTCEx_SetTimeStamp_IT() or HAL_RTCEx_SetTamper_IT() functions.
-
- (++) To wake up from the Stop mode with an RTC Wake-up event, it is necessary to
- configure the RTC to generate the RTC Wake-up event using the HAL_RTCEx_SetWakeUpTimer_IT() function.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Configures the voltage threshold detected by the Power Voltage Detector(PVD).
- * @param sConfigPVD: pointer to an PWR_PVDTypeDef structure that contains the configuration
- * information for the PVD.
- * @note Refer to the electrical characteristics of your device datasheet for
- * more details about the voltage threshold corresponding to each
- * detection level.
- * @retval None
- */
-void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD)
-{
- /* Check the parameters */
- assert_param(IS_PWR_PVD_LEVEL(sConfigPVD->PVDLevel));
- assert_param(IS_PWR_PVD_MODE(sConfigPVD->Mode));
-
- /* Set PLS[7:5] bits according to PVDLevel value */
- MODIFY_REG(PWR->CR, PWR_CR_PLS, sConfigPVD->PVDLevel);
-
- /* Clear any previous config. Keep it clear if no event or IT mode is selected */
- __HAL_PWR_PVD_EXTI_DISABLE_EVENT();
- __HAL_PWR_PVD_EXTI_DISABLE_IT();
- __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();
- __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE();
-
- /* Configure interrupt mode */
- if((sConfigPVD->Mode & PVD_MODE_IT) == PVD_MODE_IT)
- {
- __HAL_PWR_PVD_EXTI_ENABLE_IT();
- }
-
- /* Configure event mode */
- if((sConfigPVD->Mode & PVD_MODE_EVT) == PVD_MODE_EVT)
- {
- __HAL_PWR_PVD_EXTI_ENABLE_EVENT();
- }
-
- /* Configure the edge */
- if((sConfigPVD->Mode & PVD_RISING_EDGE) == PVD_RISING_EDGE)
- {
- __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();
- }
-
- if((sConfigPVD->Mode & PVD_FALLING_EDGE) == PVD_FALLING_EDGE)
- {
- __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE();
- }
-}
-
-/**
- * @brief Enables the Power Voltage Detector(PVD).
- * @retval None
- */
-void HAL_PWR_EnablePVD(void)
-{
- *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)ENABLE;
-}
-
-/**
- * @brief Disables the Power Voltage Detector(PVD).
- * @retval None
- */
-void HAL_PWR_DisablePVD(void)
-{
- *(__IO uint32_t *) CR_PVDE_BB = (uint32_t)DISABLE;
-}
-
-/**
- * @brief Enables the Wake-up PINx functionality.
- * @param WakeUpPinx: Specifies the Power Wake-Up pin to enable.
- * This parameter can be one of the following values:
- * @arg PWR_WAKEUP_PIN1
- * @arg PWR_WAKEUP_PIN2 only available in case of STM32F446xx devices
- * @retval None
- */
-void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx)
-{
- /* Check the parameter */
- assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
-
- /* Enable the wake up pin */
- SET_BIT(PWR->CSR, WakeUpPinx);
-}
-
-/**
- * @brief Disables the Wake-up PINx functionality.
- * @param WakeUpPinx: Specifies the Power Wake-Up pin to disable.
- * This parameter can be one of the following values:
- * @arg PWR_WAKEUP_PIN1
- * @arg PWR_WAKEUP_PIN2 only available in case of STM32F446xx devices
- * @retval None
- */
-void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx)
-{
- /* Check the parameter */
- assert_param(IS_PWR_WAKEUP_PIN(WakeUpPinx));
-
- /* Disable the wake up pin */
- CLEAR_BIT(PWR->CSR, WakeUpPinx);
-}
-
-/**
- * @brief Enters Sleep mode.
- *
- * @note In Sleep mode, all I/O pins keep the same state as in Run mode.
- *
- * @note In Sleep mode, the systick is stopped to avoid exit from this mode with
- * systick interrupt when used as time base for Timeout
- *
- * @param Regulator: Specifies the regulator state in SLEEP mode.
- * This parameter can be one of the following values:
- * @arg PWR_MAINREGULATOR_ON: SLEEP mode with regulator ON
- * @arg PWR_LOWPOWERREGULATOR_ON: SLEEP mode with low power regulator ON
- * @note This parameter is not used for the STM32F4 family and is kept as parameter
- * just to maintain compatibility with the lower power families.
- * @param SLEEPEntry: Specifies if SLEEP mode in entered with WFI or WFE instruction.
- * This parameter can be one of the following values:
- * @arg PWR_SLEEPENTRY_WFI: enter SLEEP mode with WFI instruction
- * @arg PWR_SLEEPENTRY_WFE: enter SLEEP mode with WFE instruction
- * @retval None
- */
-void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry)
-{
- /* Check the parameters */
- assert_param(IS_PWR_REGULATOR(Regulator));
- assert_param(IS_PWR_SLEEP_ENTRY(SLEEPEntry));
-
- /* Clear SLEEPDEEP bit of Cortex System Control Register */
- CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
-
- /* Select SLEEP mode entry -------------------------------------------------*/
- if(SLEEPEntry == PWR_SLEEPENTRY_WFI)
- {
- /* Request Wait For Interrupt */
- __WFI();
- }
- else
- {
- /* Request Wait For Event */
- __SEV();
- __WFE();
- __WFE();
- }
-}
-
-/**
- * @brief Enters Stop mode.
- * @note In Stop mode, all I/O pins keep the same state as in Run mode.
- * @note When exiting Stop mode by issuing an interrupt or a wake-up event,
- * the HSI RC oscillator is selected as system clock.
- * @note When the voltage regulator operates in low power mode, an additional
- * startup delay is incurred when waking up from Stop mode.
- * By keeping the internal regulator ON during Stop mode, the consumption
- * is higher although the startup time is reduced.
- * @param Regulator: Specifies the regulator state in Stop mode.
- * This parameter can be one of the following values:
- * @arg PWR_MAINREGULATOR_ON: Stop mode with regulator ON
- * @arg PWR_LOWPOWERREGULATOR_ON: Stop mode with low power regulator ON
- * @param STOPEntry: Specifies if Stop mode in entered with WFI or WFE instruction.
- * This parameter can be one of the following values:
- * @arg PWR_STOPENTRY_WFI: Enter Stop mode with WFI instruction
- * @arg PWR_STOPENTRY_WFE: Enter Stop mode with WFE instruction
- * @retval None
- */
-void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
-{
- /* Check the parameters */
- assert_param(IS_PWR_REGULATOR(Regulator));
- assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
-
- /* Select the regulator state in Stop mode: Set PDDS and LPDS bits according to PWR_Regulator value */
- MODIFY_REG(PWR->CR, (PWR_CR_PDDS | PWR_CR_LPDS), Regulator);
-
- /* Set SLEEPDEEP bit of Cortex System Control Register */
- SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
-
- /* Select Stop mode entry --------------------------------------------------*/
- if(STOPEntry == PWR_STOPENTRY_WFI)
- {
- /* Request Wait For Interrupt */
- __WFI();
- }
- else
- {
- /* Request Wait For Event */
- __SEV();
- __WFE();
- __WFE();
- }
- /* Reset SLEEPDEEP bit of Cortex System Control Register */
- CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
-}
-
-/**
- * @brief Enters Standby mode.
- * @note In Standby mode, all I/O pins are high impedance except for:
- * - Reset pad (still available)
- * - RTC_AF1 pin (PC13) if configured for tamper, time-stamp, RTC
- * Alarm out, or RTC clock calibration out.
- * - RTC_AF2 pin (PI8) if configured for tamper or time-stamp.
- * - WKUP pin 1 (PA0) if enabled.
- * @retval None
- */
-void HAL_PWR_EnterSTANDBYMode(void)
-{
- /* Select Standby mode */
- SET_BIT(PWR->CR, PWR_CR_PDDS);
-
- /* Set SLEEPDEEP bit of Cortex System Control Register */
- SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPDEEP_Msk));
-
- /* This option is used to ensure that store operations are completed */
-#if defined ( __CC_ARM)
- __force_stores();
-#endif
- /* Request Wait For Interrupt */
- __WFI();
-}
-
-/**
- * @brief This function handles the PWR PVD interrupt request.
- * @note This API should be called under the PVD_IRQHandler().
- * @retval None
- */
-void HAL_PWR_PVD_IRQHandler(void)
-{
- /* Check PWR Exti flag */
- if(__HAL_PWR_PVD_EXTI_GET_FLAG() != RESET)
- {
- /* PWR PVD interrupt user callback */
- HAL_PWR_PVDCallback();
-
- /* Clear PWR Exti pending bit */
- __HAL_PWR_PVD_EXTI_CLEAR_FLAG();
- }
-}
-
-/**
- * @brief PWR PVD interrupt callback
- * @retval None
- */
-__weak void HAL_PWR_PVDCallback(void)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_PWR_PVDCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Indicates Sleep-On-Exit when returning from Handler mode to Thread mode.
- * @note Set SLEEPONEXIT bit of SCR register. When this bit is set, the processor
- * re-enters SLEEP mode when an interruption handling is over.
- * Setting this bit is useful when the processor is expected to run only on
- * interruptions handling.
- * @retval None
- */
-void HAL_PWR_EnableSleepOnExit(void)
-{
- /* Set SLEEPONEXIT bit of Cortex System Control Register */
- SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
-}
-
-/**
- * @brief Disables Sleep-On-Exit feature when returning from Handler mode to Thread mode.
- * @note Clears SLEEPONEXIT bit of SCR register. When this bit is set, the processor
- * re-enters SLEEP mode when an interruption handling is over.
- * @retval None
- */
-void HAL_PWR_DisableSleepOnExit(void)
-{
- /* Clear SLEEPONEXIT bit of Cortex System Control Register */
- CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SLEEPONEXIT_Msk));
-}
-
-/**
- * @brief Enables CORTEX M4 SEVONPEND bit.
- * @note Sets SEVONPEND bit of SCR register. When this bit is set, this causes
- * WFE to wake up when an interrupt moves from inactive to pended.
- * @retval None
- */
-void HAL_PWR_EnableSEVOnPend(void)
-{
- /* Set SEVONPEND bit of Cortex System Control Register */
- SET_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
-}
-
-/**
- * @brief Disables CORTEX M4 SEVONPEND bit.
- * @note Clears SEVONPEND bit of SCR register. When this bit is set, this causes
- * WFE to wake up when an interrupt moves from inactive to pended.
- * @retval None
- */
-void HAL_PWR_DisableSEVOnPend(void)
-{
- /* Clear SEVONPEND bit of Cortex System Control Register */
- CLEAR_BIT(SCB->SCR, ((uint32_t)SCB_SCR_SEVONPEND_Msk));
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_PWR_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c
deleted file mode 100644
index b0faab1..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_pwr_ex.c
+++ /dev/null
@@ -1,624 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_pwr_ex.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief Extended PWR HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of PWR extension peripheral:
- * + Peripheral Extended features functions
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup PWREx PWREx
- * @brief PWR HAL module driver
- * @{
- */
-
-#ifdef HAL_PWR_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @addtogroup PWREx_Private_Constants
- * @{
- */
-#define PWR_OVERDRIVE_TIMEOUT_VALUE 1000
-#define PWR_UDERDRIVE_TIMEOUT_VALUE 1000
-#define PWR_BKPREG_TIMEOUT_VALUE 1000
-#define PWR_VOSRDY_TIMEOUT_VALUE 1000
-/**
- * @}
- */
-
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/** @defgroup PWREx_Exported_Functions PWREx Exported Functions
- * @{
- */
-
-/** @defgroup PWREx_Exported_Functions_Group1 Peripheral Extended features functions
- * @brief Peripheral Extended features functions
- *
-@verbatim
-
- ===============================================================================
- ##### Peripheral extended features functions #####
- ===============================================================================
-
- *** Main and Backup Regulators configuration ***
- ================================================
- [..]
- (+) The backup domain includes 4 Kbytes of backup SRAM accessible only from
- the CPU, and address in 32-bit, 16-bit or 8-bit mode. Its content is
- retained even in Standby or VBAT mode when the low power backup regulator
- is enabled. It can be considered as an internal EEPROM when VBAT is
- always present. You can use the HAL_PWREx_EnableBkUpReg() function to
- enable the low power backup regulator.
-
- (+) When the backup domain is supplied by VDD (analog switch connected to VDD)
- the backup SRAM is powered from VDD which replaces the VBAT power supply to
- save battery life.
-
- (+) The backup SRAM is not mass erased by a tamper event. It is read
- protected to prevent confidential data, such as cryptographic private
- key, from being accessed. The backup SRAM can be erased only through
- the Flash interface when a protection level change from level 1 to
- level 0 is requested.
- -@- Refer to the description of Read protection (RDP) in the Flash
- programming manual.
-
- (+) The main internal regulator can be configured to have a tradeoff between
- performance and power consumption when the device does not operate at
- the maximum frequency. This is done through __HAL_PWR_MAINREGULATORMODE_CONFIG()
- macro which configure VOS bit in PWR_CR register
-
- Refer to the product datasheets for more details.
-
- *** FLASH Power Down configuration ****
- =======================================
- [..]
- (+) By setting the FPDS bit in the PWR_CR register by using the
- HAL_PWREx_EnableFlashPowerDown() function, the Flash memory also enters power
- down mode when the device enters Stop mode. When the Flash memory
- is in power down mode, an additional startup delay is incurred when
- waking up from Stop mode.
-
- (+) For STM32F42xxx/43xxx Devices, the scale can be modified only when the PLL
- is OFF and the HSI or HSE clock source is selected as system clock.
- The new value programmed is active only when the PLL is ON.
- When the PLL is OFF, the voltage scale 3 is automatically selected.
- Refer to the datasheets for more details.
-
- *** Over-Drive and Under-Drive configuration ****
- =================================================
- [..]
- (+) For STM32F42xxx/43xxx Devices, in Run mode: the main regulator has
- 2 operating modes available:
- (++) Normal mode: The CPU and core logic operate at maximum frequency at a given
- voltage scaling (scale 1, scale 2 or scale 3)
- (++) Over-drive mode: This mode allows the CPU and the core logic to operate at a
- higher frequency than the normal mode for a given voltage scaling (scale 1,
- scale 2 or scale 3). This mode is enabled through HAL_PWREx_EnableOverDrive() function and
- disabled by HAL_PWREx_DisableOverDrive() function, to enter or exit from Over-drive mode please follow
- the sequence described in Reference manual.
-
- (+) For STM32F42xxx/43xxx Devices, in Stop mode: the main regulator or low power regulator
- supplies a low power voltage to the 1.2V domain, thus preserving the content of registers
- and internal SRAM. 2 operating modes are available:
- (++) Normal mode: the 1.2V domain is preserved in nominal leakage mode. This mode is only
- available when the main regulator or the low power regulator is used in Scale 3 or
- low voltage mode.
- (++) Under-drive mode: the 1.2V domain is preserved in reduced leakage mode. This mode is only
- available when the main regulator or the low power regulator is in low voltage mode.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Enables the Backup Regulator.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void)
-{
- uint32_t tickstart = 0;
-
- *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)ENABLE;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait till Backup regulator ready flag is set */
- while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief Disables the Backup Regulator.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void)
-{
- uint32_t tickstart = 0;
-
- *(__IO uint32_t *) CSR_BRE_BB = (uint32_t)DISABLE;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait till Backup regulator ready flag is set */
- while(__HAL_PWR_GET_FLAG(PWR_FLAG_BRR) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > PWR_BKPREG_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief Enables the Flash Power Down in Stop mode.
- * @retval None
- */
-void HAL_PWREx_EnableFlashPowerDown(void)
-{
- *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)ENABLE;
-}
-
-/**
- * @brief Disables the Flash Power Down in Stop mode.
- * @retval None
- */
-void HAL_PWREx_DisableFlashPowerDown(void)
-{
- *(__IO uint32_t *) CR_FPDS_BB = (uint32_t)DISABLE;
-}
-
-/**
- * @brief Return Voltage Scaling Range.
- * @retval The configured scale for the regulator voltage(VOS bit field).
- * The returned value can be one of the following:
- * - @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode
- * - @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode
- * - @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode
- */
-uint32_t HAL_PWREx_GetVoltageRange(void)
-{
- return (PWR->CR & PWR_CR_VOS);
-}
-
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
-/**
- * @brief Configures the main internal regulator output voltage.
- * @param VoltageScaling: specifies the regulator output voltage to achieve
- * a tradeoff between performance and power consumption.
- * This parameter can be one of the following values:
- * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode,
- * the maximum value of fHCLK = 168 MHz.
- * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode,
- * the maximum value of fHCLK = 144 MHz.
- * @note When moving from Range 1 to Range 2, the system frequency must be decreased to
- * a value below 144 MHz before calling HAL_PWREx_ConfigVoltageScaling() API.
- * When moving from Range 2 to Range 1, the system frequency can be increased to
- * a value up to 168 MHz after calling HAL_PWREx_ConfigVoltageScaling() API.
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling)
-{
- uint32_t tickstart = 0;
-
- assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling));
-
- /* Enable PWR RCC Clock Peripheral */
- __HAL_RCC_PWR_CLK_ENABLE();
-
- /* Set Range */
- __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling);
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
- while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET))
- {
- if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- return HAL_OK;
-}
-
-#elif defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \
- defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx)
-/**
- * @brief Configures the main internal regulator output voltage.
- * @param VoltageScaling: specifies the regulator output voltage to achieve
- * a tradeoff between performance and power consumption.
- * This parameter can be one of the following values:
- * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output range 1 mode,
- * the maximum value of fHCLK is 168 MHz. It can be extended to
- * 180 MHz by activating the over-drive mode.
- * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output range 2 mode,
- * the maximum value of fHCLK is 144 MHz. It can be extended to,
- * 168 MHz by activating the over-drive mode.
- * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output range 3 mode,
- * the maximum value of fHCLK is 120 MHz.
- * @note To update the system clock frequency(SYSCLK):
- * - Set the HSI or HSE as system clock frequency using the HAL_RCC_ClockConfig().
- * - Call the HAL_RCC_OscConfig() to configure the PLL.
- * - Call HAL_PWREx_ConfigVoltageScaling() API to adjust the voltage scale.
- * - Set the new system clock frequency using the HAL_RCC_ClockConfig().
- * @note The scale can be modified only when the HSI or HSE clock source is selected
- * as system clock source, otherwise the API returns HAL_ERROR.
- * @note When the PLL is OFF, the voltage scale 3 is automatically selected and the VOS bits
- * value in the PWR_CR1 register are not taken in account.
- * @note This API forces the PLL state ON to allow the possibility to configure the voltage scale 1 or 2.
- * @note The new voltage scale is active only when the PLL is ON.
- * @retval HAL Status
- */
-HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling)
-{
- uint32_t tickstart = 0;
-
- assert_param(IS_PWR_VOLTAGE_SCALING_RANGE(VoltageScaling));
-
- /* Enable PWR RCC Clock Peripheral */
- __HAL_RCC_PWR_CLK_ENABLE();
-
- /* Check if the PLL is used as system clock or not */
- if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
- {
- /* Disable the main PLL */
- __HAL_RCC_PLL_DISABLE();
-
- /* Get Start Tick */
- tickstart = HAL_GetTick();
- /* Wait till PLL is disabled */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Set Range */
- __HAL_PWR_VOLTAGESCALING_CONFIG(VoltageScaling);
-
- /* Enable the main PLL */
- __HAL_RCC_PLL_ENABLE();
-
- /* Get Start Tick */
- tickstart = HAL_GetTick();
- /* Wait till PLL is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Get Start Tick */
- tickstart = HAL_GetTick();
- while((__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY) == RESET))
- {
- if((HAL_GetTick() - tickstart ) > PWR_VOSRDY_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else
- {
- return HAL_ERROR;
- }
-
- return HAL_OK;
-}
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
-
-#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
-/**
- * @brief Enables Main Regulator low voltage mode.
- * @note This mode is only available for STM32F401xx/STM32F411xx devices.
- * @retval None
- */
-void HAL_PWREx_EnableMainRegulatorLowVoltage(void)
-{
- *(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)ENABLE;
-}
-
-/**
- * @brief Disables Main Regulator low voltage mode.
- * @note This mode is only available for STM32F401xx/STM32F411xx devices.
- * @retval None
- */
-void HAL_PWREx_DisableMainRegulatorLowVoltage(void)
-{
- *(__IO uint32_t *) CR_MRLVDS_BB = (uint32_t)DISABLE;
-}
-
-/**
- * @brief Enables Low Power Regulator low voltage mode.
- * @note This mode is only available for STM32F401xx/STM32F411xx devices.
- * @retval None
- */
-void HAL_PWREx_EnableLowRegulatorLowVoltage(void)
-{
- *(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)ENABLE;
-}
-
-/**
- * @brief Disables Low Power Regulator low voltage mode.
- * @note This mode is only available for STM32F401xx/STM32F411xx devices.
- * @retval None
- */
-void HAL_PWREx_DisableLowRegulatorLowVoltage(void)
-{
- *(__IO uint32_t *) CR_LPLVDS_BB = (uint32_t)DISABLE;
-}
-
-#endif /* STM32F401xC || STM32F401xE || STM32F411xE */
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
-/**
- * @brief Activates the Over-Drive mode.
- * @note This function can be used only for STM32F42xx/STM32F43xx devices.
- * This mode allows the CPU and the core logic to operate at a higher frequency
- * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).
- * @note It is recommended to enter or exit Over-drive mode when the application is not running
- * critical tasks and when the system clock source is either HSI or HSE.
- * During the Over-drive switch activation, no peripheral clocks should be enabled.
- * The peripheral clocks must be enabled once the Over-drive mode is activated.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void)
-{
- uint32_t tickstart = 0;
-
- __HAL_RCC_PWR_CLK_ENABLE();
-
- /* Enable the Over-drive to extend the clock frequency to 180 Mhz */
- __HAL_PWR_OVERDRIVE_ENABLE();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
- {
- if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Enable the Over-drive switch */
- __HAL_PWR_OVERDRIVESWITCHING_ENABLE();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(!__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
- {
- if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief Deactivates the Over-Drive mode.
- * @note This function can be used only for STM32F42xx/STM32F43xx devices.
- * This mode allows the CPU and the core logic to operate at a higher frequency
- * than the normal mode for a given voltage scaling (scale 1, scale 2 or scale 3).
- * @note It is recommended to enter or exit Over-drive mode when the application is not running
- * critical tasks and when the system clock source is either HSI or HSE.
- * During the Over-drive switch activation, no peripheral clocks should be enabled.
- * The peripheral clocks must be enabled once the Over-drive mode is activated.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void)
-{
- uint32_t tickstart = 0;
-
- __HAL_RCC_PWR_CLK_ENABLE();
-
- /* Disable the Over-drive switch */
- __HAL_PWR_OVERDRIVESWITCHING_DISABLE();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODSWRDY))
- {
- if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Disable the Over-drive */
- __HAL_PWR_OVERDRIVE_DISABLE();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(__HAL_PWR_GET_FLAG(PWR_FLAG_ODRDY))
- {
- if((HAL_GetTick() - tickstart ) > PWR_OVERDRIVE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Enters in Under-Drive STOP mode.
- *
- * @note This mode is only available for STM32F42xxx/STM324F3xxx devices.
- *
- * @note This mode can be selected only when the Under-Drive is already active
- *
- * @note This mode is enabled only with STOP low power mode.
- * In this mode, the 1.2V domain is preserved in reduced leakage mode. This
- * mode is only available when the main regulator or the low power regulator
- * is in low voltage mode
- *
- * @note If the Under-drive mode was enabled, it is automatically disabled after
- * exiting Stop mode.
- * When the voltage regulator operates in Under-drive mode, an additional
- * startup delay is induced when waking up from Stop mode.
- *
- * @note In Stop mode, all I/O pins keep the same state as in Run mode.
- *
- * @note When exiting Stop mode by issuing an interrupt or a wake-up event,
- * the HSI RC oscillator is selected as system clock.
- *
- * @note When the voltage regulator operates in low power mode, an additional
- * startup delay is incurred when waking up from Stop mode.
- * By keeping the internal regulator ON during Stop mode, the consumption
- * is higher although the startup time is reduced.
- *
- * @param Regulator: specifies the regulator state in STOP mode.
- * This parameter can be one of the following values:
- * @arg PWR_MAINREGULATOR_UNDERDRIVE_ON: Main Regulator in under-drive mode
- * and Flash memory in power-down when the device is in Stop under-drive mode
- * @arg PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON: Low Power Regulator in under-drive mode
- * and Flash memory in power-down when the device is in Stop under-drive mode
- * @param STOPEntry: specifies if STOP mode in entered with WFI or WFE instruction.
- * This parameter can be one of the following values:
- * @arg PWR_SLEEPENTRY_WFI: enter STOP mode with WFI instruction
- * @arg PWR_SLEEPENTRY_WFE: enter STOP mode with WFE instruction
- * @retval None
- */
-HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry)
-{
- uint32_t tmpreg1 = 0;
- uint32_t tickstart = 0;
-
- /* Check the parameters */
- assert_param(IS_PWR_REGULATOR_UNDERDRIVE(Regulator));
- assert_param(IS_PWR_STOP_ENTRY(STOPEntry));
-
- /* Enable Power ctrl clock */
- __HAL_RCC_PWR_CLK_ENABLE();
- /* Enable the Under-drive Mode ---------------------------------------------*/
- /* Clear Under-drive flag */
- __HAL_PWR_CLEAR_ODRUDR_FLAG();
-
- /* Enable the Under-drive */
- __HAL_PWR_UNDERDRIVE_ENABLE();
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait for UnderDrive mode is ready */
- while(__HAL_PWR_GET_FLAG(PWR_FLAG_UDRDY))
- {
- if((HAL_GetTick() - tickstart ) > PWR_UDERDRIVE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Select the regulator state in STOP mode ---------------------------------*/
- tmpreg1 = PWR->CR;
- /* Clear PDDS, LPDS, MRLUDS and LPLUDS bits */
- tmpreg1 &= (uint32_t)~(PWR_CR_PDDS | PWR_CR_LPDS | PWR_CR_LPUDS | PWR_CR_MRUDS);
-
- /* Set LPDS, MRLUDS and LPLUDS bits according to PWR_Regulator value */
- tmpreg1 |= Regulator;
-
- /* Store the new value */
- PWR->CR = tmpreg1;
-
- /* Set SLEEPDEEP bit of Cortex System Control Register */
- SCB->SCR |= SCB_SCR_SLEEPDEEP_Msk;
-
- /* Select STOP mode entry --------------------------------------------------*/
- if(STOPEntry == PWR_SLEEPENTRY_WFI)
- {
- /* Request Wait For Interrupt */
- __WFI();
- }
- else
- {
- /* Request Wait For Event */
- __WFE();
- }
- /* Reset SLEEPDEEP bit of Cortex System Control Register */
- SCB->SCR &= (uint32_t)~((uint32_t)SCB_SCR_SLEEPDEEP_Msk);
-
- return HAL_OK;
-}
-
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_PWR_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_qspi.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_qspi.c
deleted file mode 100644
index d681534..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_qspi.c
+++ /dev/null
@@ -1,1942 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_qspi.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief QSPI HAL module driver.
- *
- * This file provides firmware functions to manage the following
- * functionalities of the QuadSPI interface (QSPI).
- * + Initialization and de-initialization functions
- * + Indirect functional mode management
- * + Memory-mapped functional mode management
- * + Auto-polling functional mode management
- * + Interrupts and flags management
- * + DMA channel configuration for indirect functional mode
- * + Errors management and abort functionality
- *
- @verbatim
- ===============================================================================
- ##### How to use this driver #####
- ===============================================================================
- [..]
- *** Initialization ***
- ======================
- [..]
- (#) As prerequisite, fill in the HAL_QSPI_MspInit() :
- (+) Enable QuadSPI clock interface with __HAL_RCC_QSPI_CLK_ENABLE().
- (+) Reset QuadSPI IP with __HAL_RCC_QSPI_FORCE_RESET() and __HAL_RCC_QSPI_RELEASE_RESET().
- (+) Enable the clocks for the QuadSPI GPIOS with __HAL_RCC_GPIOx_CLK_ENABLE().
- (+) Configure these QuadSPI pins in alternate mode using HAL_GPIO_Init().
- (+) If interrupt mode is used, enable and configure QuadSPI global
- interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ().
- (+) If DMA mode is used, enable the clocks for the QuadSPI DMA channel
- with __HAL_RCC_DMAx_CLK_ENABLE(), configure DMA with HAL_DMA_Init(),
- link it with QuadSPI handle using __HAL_LINKDMA(), enable and configure
- DMA channel global interrupt with HAL_NVIC_SetPriority() and HAL_NVIC_EnableIRQ().
- (#) Configure the flash size, the clock prescaler, the fifo threshold, the
- clock mode, the sample shifting and the CS high time using the HAL_QSPI_Init() function.
-
- *** Indirect functional mode ***
- ================================
- [..]
- (#) Configure the command sequence using the HAL_QSPI_Command() or HAL_QSPI_Command_IT()
- functions :
- (+) Instruction phase : the mode used and if present the instruction opcode.
- (+) Address phase : the mode used and if present the size and the address value.
- (+) Alternate-bytes phase : the mode used and if present the size and the alternate
- bytes values.
- (+) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase).
- (+) Data phase : the mode used and if present the number of bytes.
- (+) Double Data Rate (DDR) mode : the activation (or not) of this mode and the delay
- if activated.
- (+) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode.
- (#) If no data is required for the command, it is sent directly to the memory :
- (+) In polling mode, the output of the function is done when the transfer is complete.
- (+) In interrupt mode, HAL_QSPI_CmdCpltCallback() will be called when the transfer is complete.
- (#) For the indirect write mode, use HAL_QSPI_Transmit(), HAL_QSPI_Transmit_DMA() or
- HAL_QSPI_Transmit_IT() after the command configuration :
- (+) In polling mode, the output of the function is done when the transfer is complete.
- (+) In interrupt mode, HAL_QSPI_FifoThresholdCallback() will be called when the fifo threshold
- is reached and HAL_QSPI_TxCpltCallback() will be called when the transfer is complete.
- (+) In DMA mode, HAL_QSPI_TxHalfCpltCallback() will be called at the half transfer and
- HAL_QSPI_TxCpltCallback() will be called when the transfer is complete.
- (#) For the indirect read mode, use HAL_QSPI_Receive(), HAL_QSPI_Receive_DMA() or
- HAL_QSPI_Receive_IT() after the command configuration :
- (+) In polling mode, the output of the function is done when the transfer is complete.
- (+) In interrupt mode, HAL_QSPI_FifoThresholdCallback() will be called when the fifo threshold
- is reached and HAL_QSPI_RxCpltCallback() will be called when the transfer is complete.
- (+) In DMA mode, HAL_QSPI_RxHalfCpltCallback() will be called at the half transfer and
- HAL_QSPI_RxCpltCallback() will be called when the transfer is complete.
-
- *** Auto-polling functional mode ***
- ====================================
- [..]
- (#) Configure the command sequence and the auto-polling functional mode using the
- HAL_QSPI_AutoPolling() or HAL_QSPI_AutoPolling_IT() functions :
- (+) Instruction phase : the mode used and if present the instruction opcode.
- (+) Address phase : the mode used and if present the size and the address value.
- (+) Alternate-bytes phase : the mode used and if present the size and the alternate
- bytes values.
- (+) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase).
- (+) Data phase : the mode used.
- (+) Double Data Rate (DDR) mode : the activation (or not) of this mode and the delay
- if activated.
- (+) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode.
- (+) The size of the status bytes, the match value, the mask used, the match mode (OR/AND),
- the polling interval and the automatic stop activation.
- (#) After the configuration :
- (+) In polling mode, the output of the function is done when the status match is reached. The
- automatic stop is activated to avoid an infinite loop.
- (+) In interrupt mode, HAL_QSPI_StatusMatchCallback() will be called each time the status match is reached.
-
- *** Memory-mapped functional mode ***
- =====================================
- [..]
- (#) Configure the command sequence and the memory-mapped functional mode using the
- HAL_QSPI_MemoryMapped() functions :
- (+) Instruction phase : the mode used and if present the instruction opcode.
- (+) Address phase : the mode used and the size.
- (+) Alternate-bytes phase : the mode used and if present the size and the alternate
- bytes values.
- (+) Dummy-cycles phase : the number of dummy cycles (mode used is same as data phase).
- (+) Data phase : the mode used.
- (+) Double Data Rate (DDR) mode : the activation (or not) of this mode and the delay
- if activated.
- (+) Sending Instruction Only Once (SIOO) mode : the activation (or not) of this mode.
- (+) The timeout activation and the timeout period.
- (#) After the configuration, the QuadSPI will be used as soon as an access on the AHB is done on
- the address range. HAL_QSPI_TimeOutCallback() will be called when the timeout expires.
-
- *** Errors management and abort functionality ***
- ==================================================
- [..]
- (#) HAL_QSPI_GetError() function gives the error rised during the last operation.
- (#) HAL_QSPI_Abort() function aborts any on-going operation and flushes the fifo.
- (#) HAL_QSPI_GetState() function gives the current state of the HAL QuadSPI driver.
-
- *** Workarounds linked to Silicon Limitation ***
- ====================================================
- [..]
- (#) Workarounds Implemented inside HAL Driver
- (+) Extra data written in the FIFO at the end of a read transfer
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup QSPI QSPI
- * @brief HAL QSPI module driver
- * @{
- */
-#ifdef HAL_QSPI_MODULE_ENABLED
-
-#if defined(STM32F446xx)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @addtogroup QSPI_Private_Constants
- * @{
- */
-#define QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE ((uint32_t)0x00000000) /*!<Indirect write mode*/
-#define QSPI_FUNCTIONAL_MODE_INDIRECT_READ ((uint32_t)QUADSPI_CCR_FMODE_0) /*!<Indirect read mode*/
-#define QSPI_FUNCTIONAL_MODE_AUTO_POLLING ((uint32_t)QUADSPI_CCR_FMODE_1) /*!<Automatic polling mode*/
-#define QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED ((uint32_t)QUADSPI_CCR_FMODE) /*!<Memory-mapped mode*/
-/**
- * @}
- */
-
-/* Private macro -------------------------------------------------------------*/
-/** @addtogroup QSPI_Private_Macros QSPI Private Macros
- * @{
- */
-#define IS_QSPI_FUNCTIONAL_MODE(MODE) (((MODE) == QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE) || \
- ((MODE) == QSPI_FUNCTIONAL_MODE_INDIRECT_READ) || \
- ((MODE) == QSPI_FUNCTIONAL_MODE_AUTO_POLLING) || \
- ((MODE) == QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED))
-/**
- * @}
- */
-
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @addtogroup QSPI_Private_Functions QSPI Private Functions
- * @{
- */
-static void QSPI_DMARxCplt(DMA_HandleTypeDef *hdma);
-static void QSPI_DMATxCplt(DMA_HandleTypeDef *hdma);
-static void QSPI_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
-static void QSPI_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
-static void QSPI_DMAError(DMA_HandleTypeDef *hdma);
-static HAL_StatusTypeDef QSPI_WaitFlagStateUntilTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Flag, FlagStatus State, uint32_t Timeout);
-static void QSPI_Config(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t FunctionalMode);
-/**
- * @}
- */
-
-/* Exported functions ---------------------------------------------------------*/
-
-/** @defgroup QSPI_Exported_Functions QSPI Exported Functions
- * @{
- */
-
-/** @defgroup QSPI_Exported_Functions_Group1 Initialization/de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
-===============================================================================
- ##### Initialization and Configuration functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to :
- (+) Initialize the QuadSPI.
- (+) De-initialize the QuadSPI.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the QSPI mode according to the specified parameters
- * in the QSPI_InitTypeDef and creates the associated handle.
- * @param hqspi: qspi handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_QSPI_Init(QSPI_HandleTypeDef *hqspi)
-{
- HAL_StatusTypeDef status = HAL_ERROR;
-
- /* Check the QSPI handle allocation */
- if(hqspi == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_QSPI_ALL_INSTANCE(hqspi->Instance));
- assert_param(IS_QSPI_CLOCK_PRESCALER(hqspi->Init.ClockPrescaler));
- assert_param(IS_QSPI_FIFO_THRESHOLD(hqspi->Init.FifoThreshold));
- assert_param(IS_QSPI_SSHIFT(hqspi->Init.SampleShifting));
- assert_param(IS_QSPI_FLASH_SIZE(hqspi->Init.FlashSize));
- assert_param(IS_QSPI_CS_HIGH_TIME(hqspi->Init.ChipSelectHighTime));
- assert_param(IS_QSPI_CLOCK_MODE(hqspi->Init.ClockMode));
- assert_param(IS_QSPI_DUAL_FLASH_MODE(hqspi->Init.DualFlash));
-
- if (hqspi->Init.DualFlash != QSPI_DUALFLASH_ENABLE )
- {
- assert_param(IS_QSPI_FLASH_ID(hqspi->Init.FlashID));
- }
-
- /* Process locked */
- __HAL_LOCK(hqspi);
-
- if(hqspi->State == HAL_QSPI_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hqspi->Lock = HAL_UNLOCKED;
-
- /* Init the low level hardware : GPIO, CLOCK */
- HAL_QSPI_MspInit(hqspi);
-
- /* Configure the default timeout for the QSPI memory access */
- HAL_QSPI_SetTimeout(hqspi, HAL_QPSI_TIMEOUT_DEFAULT_VALUE);
- }
-
- /* Configure QSPI FIFO Threshold */
- MODIFY_REG(hqspi->Instance->CR, QUADSPI_CR_FTHRES, ((hqspi->Init.FifoThreshold - 1) << 8));
-
- /* Wait till BUSY flag reset */
- status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, hqspi->Timeout);
-
- if(status == HAL_OK)
- {
-
- /* Configure QSPI Clock Prescaler and Sample Shift */
- MODIFY_REG(hqspi->Instance->CR,(QUADSPI_CR_PRESCALER | QUADSPI_CR_SSHIFT | QUADSPI_CR_FSEL | QUADSPI_CR_DFM), ((hqspi->Init.ClockPrescaler << 24)| hqspi->Init.SampleShifting | hqspi->Init.FlashID| hqspi->Init.DualFlash ));
-
- /* Configure QSPI Flash Size, CS High Time and Clock Mode */
- MODIFY_REG(hqspi->Instance->DCR, (QUADSPI_DCR_FSIZE | QUADSPI_DCR_CSHT | QUADSPI_DCR_CKMODE),
- ((hqspi->Init.FlashSize << 16) | hqspi->Init.ChipSelectHighTime | hqspi->Init.ClockMode));
-
- /* Enable the QSPI peripheral */
- __HAL_QSPI_ENABLE(hqspi);
-
- /* Set QSPI error code to none */
- hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
-
- /* Initialize the QSPI state */
- hqspi->State = HAL_QSPI_STATE_READY;
- }
-
- /* Release Lock */
- __HAL_UNLOCK(hqspi);
-
- /* Return function status */
- return status;
-}
-
-/**
- * @brief DeInitializes the QSPI peripheral
- * @param hqspi: qspi handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_QSPI_DeInit(QSPI_HandleTypeDef *hqspi)
-{
- /* Check the QSPI handle allocation */
- if(hqspi == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Process locked */
- __HAL_LOCK(hqspi);
-
- /* Disable the QSPI Peripheral Clock */
- __HAL_QSPI_DISABLE(hqspi);
-
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
- HAL_QSPI_MspDeInit(hqspi);
-
- /* Set QSPI error code to none */
- hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
-
- /* Initialize the QSPI state */
- hqspi->State = HAL_QSPI_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hqspi);
-
- return HAL_OK;
-}
-
-/**
- * @brief QSPI MSP Init
- * @param hqspi: QSPI handle
- * @retval None
- */
- __weak void HAL_QSPI_MspInit(QSPI_HandleTypeDef *hqspi)
-{
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_QSPI_MspInit can be implemented in the user file
- */
-}
-
-/**
- * @brief QSPI MSP DeInit
- * @param hqspi: QSPI handle
- * @retval None
- */
- __weak void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi)
-{
- /* NOTE : This function should not be modified, when the callback is needed,
- the HAL_QSPI_MspDeInit can be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup QSPI_Exported_Functions_Group2 IO operation functions
- * @brief QSPI Transmit/Receive functions
- *
-@verbatim
- ===============================================================================
- ##### I/O operation functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to :
- (+) Handle the interrupts.
- (+) Handle the command sequence.
- (+) Transmit data in blocking, interrupt or DMA mode.
- (+) Receive data in blocking, interrupt or DMA mode.
- (+) Manage the auto-polling functional mode.
- (+) Manage the memory-mapped functional mode.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief This function handles QSPI interrupt request.
- * @param hqspi: QSPI handle
- * @retval None.
- */
-void HAL_QSPI_IRQHandler(QSPI_HandleTypeDef *hqspi)
-{
- __IO uint32_t *data_reg;
- uint32_t flag = 0, itsource = 0;
-
- /* QSPI FIFO Threshold interrupt occurred ----------------------------------*/
- flag = __HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_FT);
- itsource = __HAL_QSPI_GET_IT_SOURCE(hqspi, QSPI_IT_FT);
-
- if((flag != RESET) && (itsource != RESET))
- {
- data_reg = &hqspi->Instance->DR;
-
- if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_TX)
- {
- /* Transmission process */
- while(__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_FT) != 0)
- {
- if (hqspi->TxXferCount > 0)
- {
- /* Fill the FIFO until it is full */
- *(__IO uint8_t *)data_reg = *hqspi->pTxBuffPtr++;
- hqspi->TxXferCount--;
- }
- else
- {
- /* No more data available for the transfer */
- break;
- }
- }
- }
- else if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_RX)
- {
- /* Receiving Process */
- while(__HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_FT) != 0)
- {
- if (hqspi->RxXferCount > 0)
- {
- /* Read the FIFO until it is empty */
- *hqspi->pRxBuffPtr++ = *(__IO uint8_t *)data_reg;
- hqspi->RxXferCount--;
- }
- else
- {
- /* All data have been received for the transfer */
- break;
- }
- }
- }
-
- /* FIFO Threshold callback */
- HAL_QSPI_FifoThresholdCallback(hqspi);
- }
-
- /* QSPI Transfer Complete interrupt occurred -------------------------------*/
- flag = __HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_TC);
- itsource = __HAL_QSPI_GET_IT_SOURCE(hqspi, QSPI_IT_TC);
-
- if((flag != RESET) && (itsource != RESET))
- {
- /* Clear interrupt */
- __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
-
- /* Disable the QSPI FIFO Threshold, Transfer Error and Transfer complete Interrupts */
- __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_TC | QSPI_IT_TE | QSPI_IT_FT);
-
- /* Transfer complete callback */
- if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_TX)
- {
- /* Clear Busy bit */
- HAL_QSPI_Abort(hqspi);
-
- /* TX Complete callback */
- HAL_QSPI_TxCpltCallback(hqspi);
- }
- else if(hqspi->State == HAL_QSPI_STATE_BUSY_INDIRECT_RX)
- {
- data_reg = &hqspi->Instance->DR;
- while(READ_BIT(hqspi->Instance->SR, QUADSPI_SR_FLEVEL) != 0)
- {
- if (hqspi->RxXferCount > 0)
- {
- /* Read the last data received in the FIFO until it is empty */
- *hqspi->pRxBuffPtr++ = *(__IO uint8_t *)data_reg;
- hqspi->RxXferCount--;
- }
- else
- {
- /* All data have been received for the transfer */
- break;
- }
- }
-
- /* Workaround - Extra data written in the FIFO at the end of a read transfer */
- HAL_QSPI_Abort(hqspi);
-
- /* RX Complete callback */
- HAL_QSPI_RxCpltCallback(hqspi);
- }
- else if(hqspi->State == HAL_QSPI_STATE_BUSY)
- {
- /* Command Complete callback */
- HAL_QSPI_CmdCpltCallback(hqspi);
- }
-
- /* Change state of QSPI */
- hqspi->State = HAL_QSPI_STATE_READY;
- }
-
- /* QSPI Status Match interrupt occurred ------------------------------------*/
- flag = __HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_SM);
- itsource = __HAL_QSPI_GET_IT_SOURCE(hqspi, QSPI_IT_SM);
-
- if((flag != RESET) && (itsource != RESET))
- {
- /* Clear interrupt */
- __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_SM);
-
- /* Check if the automatic poll mode stop is activated */
- if(READ_BIT(hqspi->Instance->CR, QUADSPI_CR_APMS) != 0)
- {
- /* Disable the QSPI FIFO Threshold, Transfer Error and Status Match Interrupts */
- __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_SM | QSPI_IT_FT | QSPI_IT_TE);
-
- /* Change state of QSPI */
- hqspi->State = HAL_QSPI_STATE_READY;
- }
-
- /* Status match callback */
- HAL_QSPI_StatusMatchCallback(hqspi);
- }
-
- /* QSPI Transfer Error interrupt occurred ----------------------------------*/
- flag = __HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_TE);
- itsource = __HAL_QSPI_GET_IT_SOURCE(hqspi, QSPI_IT_TE);
-
- if((flag != RESET) && (itsource != RESET))
- {
- /* Clear interrupt */
- __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TE);
-
- /* Disable all the QSPI Interrupts */
- __HAL_QSPI_DISABLE_IT(hqspi, QSPI_IT_SM | QSPI_IT_TC | QSPI_IT_TE | QSPI_IT_FT);
-
- /* Set error code */
- hqspi->ErrorCode |= HAL_QSPI_ERROR_TRANSFER;
-
- /* Change state of QSPI */
- hqspi->State = HAL_QSPI_STATE_ERROR;
-
- /* Error callback */
- HAL_QSPI_ErrorCallback(hqspi);
- }
-
- /* QSPI Time out interrupt occurred -----------------------------------------*/
- flag = __HAL_QSPI_GET_FLAG(hqspi, QSPI_FLAG_TO);
- itsource = __HAL_QSPI_GET_IT_SOURCE(hqspi, QSPI_IT_TO);
-
- if((flag != RESET) && (itsource != RESET))
- {
- /* Clear interrupt */
- __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TO);
-
- /* Time out callback */
- HAL_QSPI_TimeOutCallback(hqspi);
- }
-}
-
-/**
- * @brief Sets the command configuration.
- * @param hqspi: QSPI handle
- * @param cmd : structure that contains the command configuration information
- * @param Timeout : Time out duration
- * @note This function is used only in Indirect Read or Write Modes
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_QSPI_Command(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t Timeout)
-{
- HAL_StatusTypeDef status = HAL_ERROR;
-
- /* Check the parameters */
- assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
- if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
- {
- assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
- }
-
- assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
- if (cmd->AddressMode != QSPI_ADDRESS_NONE)
- {
- assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
- }
-
- assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
- if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
- {
- assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
- }
-
- assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
- assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
-
- assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
- assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
- assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
-
- /* Process locked */
- __HAL_LOCK(hqspi);
-
- if(hqspi->State == HAL_QSPI_STATE_READY)
- {
- hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
-
- /* Update QSPI state */
- hqspi->State = HAL_QSPI_STATE_BUSY;
-
- /* Wait till BUSY flag reset */
- status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, Timeout);
-
- if (status == HAL_OK)
- {
- /* Call the configuration function */
- QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
-
- if (cmd->DataMode == QSPI_DATA_NONE)
- {
- /* When there is no data phase, the transfer start as soon as the configuration is done
- so wait until TC flag is set to go back in idle state */
- if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, Timeout) != HAL_OK)
- {
- status = HAL_TIMEOUT;
- }
- else
- {
- __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
-
- /* Update QSPI state */
- hqspi->State = HAL_QSPI_STATE_READY;
- }
-
- }
- else
- {
- /* Update QSPI state */
- hqspi->State = HAL_QSPI_STATE_READY;
- }
- }
- }
- else
- {
- status = HAL_BUSY;
- }
-
- /* Process unlocked */
- __HAL_UNLOCK(hqspi);
-
- /* Return function status */
- return status;
-}
-
-/**
- * @brief Sets the command configuration in interrupt mode.
- * @param hqspi: QSPI handle
- * @param cmd : structure that contains the command configuration information
- * @note This function is used only in Indirect Read or Write Modes
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_QSPI_Command_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd)
-{
- HAL_StatusTypeDef status = HAL_ERROR;
-
- /* Check the parameters */
- assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
- if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
- {
- assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
- }
-
- assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
- if (cmd->AddressMode != QSPI_ADDRESS_NONE)
- {
- assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
- }
-
- assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
- if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
- {
- assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
- }
-
- assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
- assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
-
- assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
- assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
- assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
-
- /* Process locked */
- __HAL_LOCK(hqspi);
-
- if(hqspi->State == HAL_QSPI_STATE_READY)
- {
- hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
-
- /* Update QSPI state */
- hqspi->State = HAL_QSPI_STATE_BUSY;
-
- /* Wait till BUSY flag reset */
- status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, hqspi->Timeout);
-
- if (status == HAL_OK)
- {
- if (cmd->DataMode == QSPI_DATA_NONE)
- {
- /* When there is no data phase, the transfer start as soon as the configuration is done
- so activate TC and TE interrupts */
- /* Enable the QSPI Transfer Error Interrupt */
- __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE | QSPI_IT_TC);
- }
-
- /* Call the configuration function */
- QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
-
- if (cmd->DataMode != QSPI_DATA_NONE)
- {
- /* Update QSPI state */
- hqspi->State = HAL_QSPI_STATE_READY;
- }
- }
- }
- else
- {
- status = HAL_BUSY;
- }
-
- /* Process unlocked */
- __HAL_UNLOCK(hqspi);
-
- /* Return function status */
- return status;
-}
-
-/**
- * @brief Transmit an amount of data in blocking mode.
- * @param hqspi: QSPI handle
- * @param pData: pointer to data buffer
- * @param Timeout : Time out duration
- * @note This function is used only in Indirect Write Mode
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_QSPI_Transmit(QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout)
-{
- HAL_StatusTypeDef status = HAL_OK;
- __IO uint32_t *data_reg = &hqspi->Instance->DR;
-
- /* Process locked */
- __HAL_LOCK(hqspi);
-
- if(hqspi->State == HAL_QSPI_STATE_READY)
- {
- if(pData != NULL )
- {
- hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
-
- /* Update state */
- hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_TX;
-
- /* Configure counters and size of the handle */
- hqspi->TxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
- hqspi->TxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
- hqspi->pTxBuffPtr = pData;
-
- /* Configure QSPI: CCR register with functional as indirect write */
- MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
-
- while(hqspi->TxXferCount > 0)
- {
- /* Wait until FT flag is set to send data */
- if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_FT, SET, Timeout) != HAL_OK)
- {
- status = HAL_TIMEOUT;
- break;
- }
-
- *(__IO uint8_t *)data_reg = *hqspi->pTxBuffPtr++;
- hqspi->TxXferCount--;
- }
-
- if (status == HAL_OK)
- {
- /* Wait until TC flag is set to go back in idle state */
- if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, Timeout) != HAL_OK)
- {
- status = HAL_TIMEOUT;
- }
- else
- {
- /* Clear Transfer Complete bit */
- __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
-
- /* Clear Busy bit */
- status = HAL_QSPI_Abort(hqspi);
- }
- }
-
- /* Update QSPI state */
- hqspi->State = HAL_QSPI_STATE_READY;
- }
- else
- {
- status = HAL_ERROR;
- }
- }
- else
- {
- status = HAL_BUSY;
- }
-
- /* Process unlocked */
- __HAL_UNLOCK(hqspi);
-
- return status;
-}
-
-
-/**
- * @brief Receive an amount of data in blocking mode
- * @param hqspi: QSPI handle
- * @param pData: pointer to data buffer
- * @param Timeout : Time out duration
- * @note This function is used only in Indirect Read Mode
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_QSPI_Receive(QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout)
-{
- HAL_StatusTypeDef status = HAL_OK;
- uint32_t addr_reg = READ_REG(hqspi->Instance->AR);
- __IO uint32_t *data_reg = &hqspi->Instance->DR;
-
- /* Process locked */
- __HAL_LOCK(hqspi);
-
- if(hqspi->State == HAL_QSPI_STATE_READY)
- {
- if(pData != NULL )
- {
- hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
-
- /* Update state */
- hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_RX;
-
- /* Configure counters and size of the handle */
- hqspi->RxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
- hqspi->RxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
- hqspi->pRxBuffPtr = pData;
-
- /* Configure QSPI: CCR register with functional as indirect read */
- MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ);
-
- /* Start the transfer by re-writing the address in AR register */
- WRITE_REG(hqspi->Instance->AR, addr_reg);
-
- while(hqspi->RxXferCount > 0)
- {
- /* Wait until FT or TC flag is set to read received data */
- if(QSPI_WaitFlagStateUntilTimeout(hqspi, (QSPI_FLAG_FT | QSPI_FLAG_TC), SET, Timeout) != HAL_OK)
- {
- status = HAL_TIMEOUT;
- break;
- }
-
- *hqspi->pRxBuffPtr++ = *(__IO uint8_t *)data_reg;
- hqspi->RxXferCount--;
- }
-
- if (status == HAL_OK)
- {
- /* Wait until TC flag is set to go back in idle state */
- if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, Timeout) != HAL_OK)
- {
- status = HAL_TIMEOUT;
- }
- else
- {
- /* Clear Transfer Complete bit */
- __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
-
- /* Workaround - Extra data written in the FIFO at the end of a read transfer */
- status = HAL_QSPI_Abort(hqspi);
- }
- }
-
- /* Update QSPI state */
- hqspi->State = HAL_QSPI_STATE_READY;
- }
- else
- {
- status = HAL_ERROR;
- }
- }
- else
- {
- status = HAL_BUSY;
- }
-
- /* Process unlocked */
- __HAL_UNLOCK(hqspi);
-
- return status;
-}
-
-/**
- * @brief Send an amount of data in interrupt mode
- * @param hqspi: QSPI handle
- * @param pData: pointer to data buffer
- * @note This function is used only in Indirect Write Mode
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_QSPI_Transmit_IT(QSPI_HandleTypeDef *hqspi, uint8_t *pData)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Process locked */
- __HAL_LOCK(hqspi);
-
- if(hqspi->State == HAL_QSPI_STATE_READY)
- {
- if(pData != NULL )
- {
- hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
-
- /* Update state */
- hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_TX;
-
- /* Configure counters and size of the handle */
- hqspi->TxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
- hqspi->TxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
- hqspi->pTxBuffPtr = pData;
-
- /* Configure QSPI: CCR register with functional as indirect write */
- MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
-
- /* Enable the QSPI transfer error, FIFO threshold and transfert complete Interrupts */
- __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE | QSPI_IT_FT | QSPI_IT_TC);
-
- }
- else
- {
- status = HAL_ERROR;
- }
- }
- else
- {
- status = HAL_BUSY;
- }
-
- /* Process unlocked */
- __HAL_UNLOCK(hqspi);
-
- return status;
-}
-
-/**
- * @brief Receive an amount of data in no-blocking mode with Interrupt
- * @param hqspi: QSPI handle
- * @param pData: pointer to data buffer
- * @note This function is used only in Indirect Read Mode
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_QSPI_Receive_IT(QSPI_HandleTypeDef *hqspi, uint8_t *pData)
-{
- HAL_StatusTypeDef status = HAL_OK;
- uint32_t addr_reg = READ_REG(hqspi->Instance->AR);
-
- /* Process locked */
- __HAL_LOCK(hqspi);
-
- if(hqspi->State == HAL_QSPI_STATE_READY)
- {
- if(pData != NULL )
- {
- hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
-
- /* Update state */
- hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_RX;
-
- /* Configure counters and size of the handle */
- hqspi->RxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
- hqspi->RxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
- hqspi->pRxBuffPtr = pData;
-
- /* Configure QSPI: CCR register with functional as indirect read */
- MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ);
-
- /* Start the transfer by re-writing the address in AR register */
- WRITE_REG(hqspi->Instance->AR, addr_reg);
-
- /* Enable the QSPI transfer error, FIFO threshold and transfert complete Interrupts */
- __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TE | QSPI_IT_FT | QSPI_IT_TC);
- }
- else
- {
- status = HAL_ERROR;
- }
- }
- else
- {
- status = HAL_BUSY;
- }
-
- /* Process unlocked */
- __HAL_UNLOCK(hqspi);
-
- return status;
-}
-
-/**
- * @brief Sends an amount of data in non blocking mode with DMA.
- * @param hqspi: QSPI handle
- * @param pData: pointer to data buffer
- * @note This function is used only in Indirect Write Mode
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_QSPI_Transmit_DMA(QSPI_HandleTypeDef *hqspi, uint8_t *pData)
-{
- HAL_StatusTypeDef status = HAL_OK;
- uint32_t *tmp;
-
- /* Process locked */
- __HAL_LOCK(hqspi);
-
- if(hqspi->State == HAL_QSPI_STATE_READY)
- {
- if(pData != NULL )
- {
- hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
-
- /* Update state */
- hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_TX;
-
- /* Configure counters and size of the handle */
- hqspi->TxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
- hqspi->TxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
- hqspi->pTxBuffPtr = pData;
-
- /* Configure QSPI: CCR register with functional mode as indirect write */
- MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE);
-
- /* Set the QSPI DMA transfer complete callback */
- hqspi->hdma->XferCpltCallback = QSPI_DMATxCplt;
-
- /* Set the QSPI DMA Half transfer complete callback */
- hqspi->hdma->XferHalfCpltCallback = QSPI_DMATxHalfCplt;
-
- /* Set the DMA error callback */
- hqspi->hdma->XferErrorCallback = QSPI_DMAError;
-
- /* Configure the direction of the DMA */
- hqspi->hdma->Init.Direction = DMA_MEMORY_TO_PERIPH;
- MODIFY_REG(hqspi->hdma->Instance->CR, DMA_SxCR_DIR, hqspi->hdma->Init.Direction);
-
- /* Enable the QSPI transmit DMA Channel */
- tmp = (uint32_t*)&pData;
- HAL_DMA_Start_IT(hqspi->hdma, *(uint32_t*)tmp, (uint32_t)&hqspi->Instance->DR, hqspi->TxXferSize);
-
- /* Enable the DMA transfer by setting the DMAEN bit in the QSPI CR register */
- SET_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
- }
- else
- {
- status = HAL_OK;
- }
- }
- else
- {
- status = HAL_BUSY;
- }
-
- /* Process unlocked */
- __HAL_UNLOCK(hqspi);
-
- return status;
-}
-
-/**
- * @brief Receives an amount of data in non blocking mode with DMA.
- * @param hqspi: QSPI handle
- * @param pData: pointer to data buffer.
- * @note This function is used only in Indirect Read Mode
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_QSPI_Receive_DMA(QSPI_HandleTypeDef *hqspi, uint8_t *pData)
-{
- HAL_StatusTypeDef status = HAL_OK;
- uint32_t *tmp;
- uint32_t addr_reg = READ_REG(hqspi->Instance->AR);
-
- /* Process locked */
- __HAL_LOCK(hqspi);
-
- if(hqspi->State == HAL_QSPI_STATE_READY)
- {
- if(pData != NULL )
- {
- hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
-
- /* Update state */
- hqspi->State = HAL_QSPI_STATE_BUSY_INDIRECT_RX;
-
- /* Configure counters and size of the handle */
- hqspi->RxXferCount = READ_REG(hqspi->Instance->DLR) + 1;
- hqspi->RxXferSize = READ_REG(hqspi->Instance->DLR) + 1;
- hqspi->pRxBuffPtr = pData;
-
- /* Set the QSPI DMA transfer complete callback */
- hqspi->hdma->XferCpltCallback = QSPI_DMARxCplt;
-
- /* Set the QSPI DMA Half transfer complete callback */
- hqspi->hdma->XferHalfCpltCallback = QSPI_DMARxHalfCplt;
-
- /* Set the DMA error callback */
- hqspi->hdma->XferErrorCallback = QSPI_DMAError;
-
- /* Configure the direction of the DMA */
- hqspi->hdma->Init.Direction = DMA_PERIPH_TO_MEMORY;
- MODIFY_REG(hqspi->hdma->Instance->CR, DMA_SxCR_DIR, hqspi->hdma->Init.Direction);
-
- /* Enable the DMA Channel */
- tmp = (uint32_t*)&pData;
- HAL_DMA_Start_IT(hqspi->hdma, (uint32_t)&hqspi->Instance->DR, *(uint32_t*)tmp, hqspi->RxXferSize);
-
- /* Configure QSPI: CCR register with functional as indirect read */
- MODIFY_REG(hqspi->Instance->CCR, QUADSPI_CCR_FMODE, QSPI_FUNCTIONAL_MODE_INDIRECT_READ);
-
- /* Start the transfer by re-writing the address in AR register */
- WRITE_REG(hqspi->Instance->AR, addr_reg);
-
- /* Enable the DMA transfer by setting the DMAEN bit in the QSPI CR register */
- SET_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
- }
- else
- {
- status = HAL_ERROR;
- }
- }
- else
- {
- status = HAL_BUSY;
- }
-
- /* Process unlocked */
- __HAL_UNLOCK(hqspi);
-
- return status;
-}
-
-/**
- * @brief Configure the QSPI Automatic Polling Mode in blocking mode.
- * @param hqspi: QSPI handle
- * @param cmd: structure that contains the command configuration information.
- * @param cfg: structure that contains the polling configuration information.
- * @param Timeout : Time out duration
- * @note This function is used only in Automatic Polling Mode
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_QSPI_AutoPolling(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg, uint32_t Timeout)
-{
- HAL_StatusTypeDef status = HAL_ERROR;
-
- /* Check the parameters */
- assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
- if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
- {
- assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
- }
-
- assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
- if (cmd->AddressMode != QSPI_ADDRESS_NONE)
- {
- assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
- }
-
- assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
- if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
- {
- assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
- }
-
- assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
- assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
-
- assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
- assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
- assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
-
- assert_param(IS_QSPI_INTERVAL(cfg->Interval));
- assert_param(IS_QSPI_STATUS_BYTES_SIZE(cfg->StatusBytesSize));
- assert_param(IS_QSPI_MATCH_MODE(cfg->MatchMode));
-
- /* Process locked */
- __HAL_LOCK(hqspi);
-
- if(hqspi->State == HAL_QSPI_STATE_READY)
- {
-
- hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
-
- /* Update state */
- hqspi->State = HAL_QSPI_STATE_BUSY_AUTO_POLLING;
-
- /* Wait till BUSY flag reset */
- status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, Timeout);
-
- if (status == HAL_OK)
- {
- /* Configure QSPI: PSMAR register with the status match value */
- WRITE_REG(hqspi->Instance->PSMAR, cfg->Match);
-
- /* Configure QSPI: PSMKR register with the status mask value */
- WRITE_REG(hqspi->Instance->PSMKR, cfg->Mask);
-
- /* Configure QSPI: PIR register with the interval value */
- WRITE_REG(hqspi->Instance->PIR, cfg->Interval);
-
- /* Configure QSPI: CR register with Match mode and Automatic stop enabled
- (otherwise there will be an infinite loop in blocking mode) */
- MODIFY_REG(hqspi->Instance->CR, (QUADSPI_CR_PMM | QUADSPI_CR_APMS),
- (cfg->MatchMode | QSPI_AUTOMATIC_STOP_ENABLE));
-
- /* Call the configuration function */
- cmd->NbData = cfg->StatusBytesSize;
- QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_AUTO_POLLING);
-
- /* Wait until SM flag is set to go back in idle state */
- if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_SM, SET, Timeout) != HAL_OK)
- {
- status = HAL_TIMEOUT;
- }
- else
- {
- __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_SM);
-
- /* Update state */
- hqspi->State = HAL_QSPI_STATE_READY;
- }
- }
- }
- else
- {
- status = HAL_BUSY;
- }
- /* Process unlocked */
- __HAL_UNLOCK(hqspi);
-
- /* Return function status */
- return status;
-}
-
-/**
- * @brief Configure the QSPI Automatic Polling Mode in non-blocking mode.
- * @param hqspi: QSPI handle
- * @param cmd: structure that contains the command configuration information.
- * @param cfg: structure that contains the polling configuration information.
- * @note This function is used only in Automatic Polling Mode
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_QSPI_AutoPolling_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg)
-{
- HAL_StatusTypeDef status = HAL_ERROR;
-
- /* Check the parameters */
- assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
- if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
- {
- assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
- }
-
- assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
- if (cmd->AddressMode != QSPI_ADDRESS_NONE)
- {
- assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
- }
-
- assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
- if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
- {
- assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
- }
-
- assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
- assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
-
- assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
- assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
- assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
-
- assert_param(IS_QSPI_INTERVAL(cfg->Interval));
- assert_param(IS_QSPI_STATUS_BYTES_SIZE(cfg->StatusBytesSize));
- assert_param(IS_QSPI_MATCH_MODE(cfg->MatchMode));
- assert_param(IS_QSPI_AUTOMATIC_STOP(cfg->AutomaticStop));
-
- /* Process locked */
- __HAL_LOCK(hqspi);
-
-if(hqspi->State == HAL_QSPI_STATE_READY)
- {
- hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
-
- /* Update state */
- hqspi->State = HAL_QSPI_STATE_BUSY_AUTO_POLLING;
-
- /* Wait till BUSY flag reset */
- status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, hqspi->Timeout);
-
- if (status == HAL_OK)
- {
- /* Configure QSPI: PSMAR register with the status match value */
- WRITE_REG(hqspi->Instance->PSMAR, cfg->Match);
-
- /* Configure QSPI: PSMKR register with the status mask value */
- WRITE_REG(hqspi->Instance->PSMKR, cfg->Mask);
-
- /* Configure QSPI: PIR register with the interval value */
- WRITE_REG(hqspi->Instance->PIR, cfg->Interval);
-
- /* Configure QSPI: CR register with Match mode and Automatic stop mode */
- MODIFY_REG(hqspi->Instance->CR, (QUADSPI_CR_PMM | QUADSPI_CR_APMS),
- (cfg->MatchMode | cfg->AutomaticStop));
-
- /* Call the configuration function */
- cmd->NbData = cfg->StatusBytesSize;
- QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_AUTO_POLLING);
-
- /* Enable the QSPI Transfer Error, FIFO threshold and status match Interrupt */
- __HAL_QSPI_ENABLE_IT(hqspi, (QSPI_IT_FT | QSPI_IT_SM | QSPI_IT_TE));
- }
- }
- else
- {
- status = HAL_BUSY;
- }
-
- /* Process unlocked */
- __HAL_UNLOCK(hqspi);
-
- /* Return function status */
- return status;
-}
-
-/**
- * @brief Configure the Memory Mapped mode.
- * @param hqspi: QSPI handle
- * @param cmd: structure that contains the command configuration information.
- * @param cfg: structure that contains the memory mapped configuration information.
- * @note This function is used only in Memory mapped Mode
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_QSPI_MemoryMapped(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_MemoryMappedTypeDef *cfg)
-{
- HAL_StatusTypeDef status = HAL_ERROR;
-
- /* Check the parameters */
- assert_param(IS_QSPI_INSTRUCTION_MODE(cmd->InstructionMode));
- if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
- {
- assert_param(IS_QSPI_INSTRUCTION(cmd->Instruction));
- }
-
- assert_param(IS_QSPI_ADDRESS_MODE(cmd->AddressMode));
- if (cmd->AddressMode != QSPI_ADDRESS_NONE)
- {
- assert_param(IS_QSPI_ADDRESS_SIZE(cmd->AddressSize));
- }
-
- assert_param(IS_QSPI_ALTERNATE_BYTES_MODE(cmd->AlternateByteMode));
- if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
- {
- assert_param(IS_QSPI_ALTERNATE_BYTES_SIZE(cmd->AlternateBytesSize));
- }
-
- assert_param(IS_QSPI_DUMMY_CYCLES(cmd->DummyCycles));
- assert_param(IS_QSPI_DATA_MODE(cmd->DataMode));
-
- assert_param(IS_QSPI_DDR_MODE(cmd->DdrMode));
- assert_param(IS_QSPI_DDR_HHC(cmd->DdrHoldHalfCycle));
- assert_param(IS_QSPI_SIOO_MODE(cmd->SIOOMode));
-
- assert_param(IS_QSPI_TIMEOUT_ACTIVATION(cfg->TimeOutActivation));
-
- /* Process locked */
- __HAL_LOCK(hqspi);
-
- if(hqspi->State == HAL_QSPI_STATE_READY)
- {
- hqspi->ErrorCode = HAL_QSPI_ERROR_NONE;
-
- /* Update state */
- hqspi->State = HAL_QSPI_STATE_BUSY_MEM_MAPPED;
-
- /* Wait till BUSY flag reset */
- status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, hqspi->Timeout);
-
- if (status == HAL_OK)
- {
- /* Configure QSPI: CR register with time out counter enable */
- MODIFY_REG(hqspi->Instance->CR, QUADSPI_CR_TCEN, cfg->TimeOutActivation);
-
- if (cfg->TimeOutActivation == QSPI_TIMEOUT_COUNTER_ENABLE)
- {
- assert_param(IS_QSPI_TIMEOUT_PERIOD(cfg->TimeOutPeriod));
-
- /* Configure QSPI: LPTR register with the low-power time out value */
- WRITE_REG(hqspi->Instance->LPTR, cfg->TimeOutPeriod);
-
- /* Enable the QSPI TimeOut Interrupt */
- __HAL_QSPI_ENABLE_IT(hqspi, QSPI_IT_TO);
- }
-
- /* Call the configuration function */
- QSPI_Config(hqspi, cmd, QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED);
-
- }
- }
- else
- {
- status = HAL_BUSY;
-
- }
-
- /* Process unlocked */
- __HAL_UNLOCK(hqspi);
-
- /* Return function status */
- return status;
-}
-
-/**
- * @brief Transfer Error callbacks
- * @param hqspi: QSPI handle
- * @retval None
- */
-__weak void HAL_QSPI_ErrorCallback(QSPI_HandleTypeDef *hqspi)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_QSPI_ErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Command completed callbacks.
- * @param hqspi: QSPI handle
- * @retval None
- */
-__weak void HAL_QSPI_CmdCpltCallback(QSPI_HandleTypeDef *hqspi)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_QSPI_CmdCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Transfer completed callbacks.
- * @param hqspi: QSPI handle
- * @retval None
- */
-__weak void HAL_QSPI_RxCpltCallback(QSPI_HandleTypeDef *hqspi)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_QSPI_RxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Tx Transfer completed callbacks.
- * @param hqspi: QSPI handle
- * @retval None
- */
- __weak void HAL_QSPI_TxCpltCallback(QSPI_HandleTypeDef *hqspi)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_QSPI_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Half Transfer completed callbacks.
- * @param hqspi: QSPI handle
- * @retval None
- */
-__weak void HAL_QSPI_RxHalfCpltCallback(QSPI_HandleTypeDef *hqspi)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_QSPI_RxHalfCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Tx Half Transfer completed callbacks.
- * @param hqspi: QSPI handle
- * @retval None
- */
- __weak void HAL_QSPI_TxHalfCpltCallback(QSPI_HandleTypeDef *hqspi)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_QSPI_TxHalfCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief FIFO Threshold callbacks
- * @param hqspi: QSPI handle
- * @retval None
- */
-__weak void HAL_QSPI_FifoThresholdCallback(QSPI_HandleTypeDef *hqspi)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_QSPI_FIFOThresholdCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Status Match callbacks
- * @param hqspi: QSPI handle
- * @retval None
- */
-__weak void HAL_QSPI_StatusMatchCallback(QSPI_HandleTypeDef *hqspi)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_QSPI_StatusMatchCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Timeout callbacks
- * @param hqspi: QSPI handle
- * @retval None
- */
-__weak void HAL_QSPI_TimeOutCallback(QSPI_HandleTypeDef *hqspi)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_QSPI_TimeOutCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup QSPI_Exported_Functions_Group3 Peripheral Control and State functions
- * @brief QSPI control and State functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Control and State functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to :
- (+) Check in run-time the state of the driver.
- (+) Check the error code set during last operation.
- (+) Abort any operation.
-.....
-@endverbatim
- * @{
- */
-
-/**
- * @brief Return the QSPI state.
- * @param hqspi: QSPI handle
- * @retval HAL state
- */
-HAL_QSPI_StateTypeDef HAL_QSPI_GetState(QSPI_HandleTypeDef *hqspi)
-{
- return hqspi->State;
-}
-
-/**
-* @brief Return the QSPI error code
-* @param hqspi: QSPI handle
-* @retval QSPI Error Code
-*/
-uint32_t HAL_QSPI_GetError(QSPI_HandleTypeDef *hqspi)
-{
- return hqspi->ErrorCode;
-}
-
-/**
-* @brief Abort the current transmission
-* @param hqspi: QSPI handle
-* @retval HAL status
-*/
-HAL_StatusTypeDef HAL_QSPI_Abort(QSPI_HandleTypeDef *hqspi)
-{
- HAL_StatusTypeDef status = HAL_ERROR;
-
- /* Configure QSPI: CR register with Abort request */
- SET_BIT(hqspi->Instance->CR, QUADSPI_CR_ABORT);
-
- /* Wait until TC flag is set to go back in idle state */
- if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, hqspi->Timeout) != HAL_OK)
- {
- status = HAL_TIMEOUT;
- }
- else
- {
- __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
-
- /* Wait until BUSY flag is reset */
- status = QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_BUSY, RESET, hqspi->Timeout);
-
- /* Update state */
- hqspi->State = HAL_QSPI_STATE_READY;
- }
-
- return status;
-}
-
-/** @brief Set QSPI timeout
- * @param hqspi: QSPI handle.
- * @param Timeout: Timeout for the QSPI memory access.
- * @retval None
- */
-void HAL_QSPI_SetTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Timeout)
-{
- hqspi->Timeout = Timeout;
-}
-
-/**
-* @}
-*/
-
-/* Private functions ---------------------------------------------------------*/
-
-/**
- * @brief DMA QSPI receive process complete callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void QSPI_DMARxCplt(DMA_HandleTypeDef *hdma)
-{
- QSPI_HandleTypeDef* hqspi = ( QSPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- hqspi->RxXferCount = 0;
-
- /* Wait for QSPI TC Flag */
- if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, hqspi->Timeout) != HAL_OK)
- {
- /* Time out Occurred */
- HAL_QSPI_ErrorCallback(hqspi);
- }
- else
- {
- /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */
- CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
-
- /* Disable the DMA channel */
- HAL_DMA_Abort(hdma);
-
- /* Clear Transfer Complete bit */
- __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
-
- /* Workaround - Extra data written in the FIFO at the end of a read transfer */
- HAL_QSPI_Abort(hqspi);
-
- /* Update state */
- hqspi->State = HAL_QSPI_STATE_READY;
-
- HAL_QSPI_RxCpltCallback(hqspi);
- }
-}
-
-/**
- * @brief DMA QSPI transmit process complete callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void QSPI_DMATxCplt(DMA_HandleTypeDef *hdma)
-{
- QSPI_HandleTypeDef* hqspi = ( QSPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- hqspi->TxXferCount = 0;
-
- /* Wait for QSPI TC Flag */
- if(QSPI_WaitFlagStateUntilTimeout(hqspi, QSPI_FLAG_TC, SET, hqspi->Timeout) != HAL_OK)
- {
- /* Time out Occurred */
- HAL_QSPI_ErrorCallback(hqspi);
- }
- else
- {
- /* Disable the DMA transfer by clearing the DMAEN bit in the QSPI CR register */
- CLEAR_BIT(hqspi->Instance->CR, QUADSPI_CR_DMAEN);
-
- /* Disable the DMA channel */
- HAL_DMA_Abort(hdma);
-
- /* Clear Transfer Complete bit */
- __HAL_QSPI_CLEAR_FLAG(hqspi, QSPI_FLAG_TC);
-
- /* Clear Busy bit */
- HAL_QSPI_Abort(hqspi);
-
- /* Update state */
- hqspi->State = HAL_QSPI_STATE_READY;
-
- HAL_QSPI_TxCpltCallback(hqspi);
- }
-}
-
-/**
- * @brief DMA QSPI receive process half complete callback
- * @param hdma : DMA handle
- * @retval None
- */
-static void QSPI_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
-{
- QSPI_HandleTypeDef* hqspi = (QSPI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- HAL_QSPI_RxHalfCpltCallback(hqspi);
-}
-
-/**
- * @brief DMA QSPI transmit process half complete callback
- * @param hdma : DMA handle
- * @retval None
- */
-static void QSPI_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
-{
- QSPI_HandleTypeDef* hqspi = (QSPI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- HAL_QSPI_TxHalfCpltCallback(hqspi);
-}
-
-/**
- * @brief DMA QSPI communication error callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void QSPI_DMAError(DMA_HandleTypeDef *hdma)
-{
- QSPI_HandleTypeDef* hqspi = ( QSPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- hqspi->RxXferCount = 0;
- hqspi->TxXferCount = 0;
- hqspi->State = HAL_QSPI_STATE_ERROR;
- hqspi->ErrorCode |= HAL_QSPI_ERROR_DMA;
-
- HAL_QSPI_ErrorCallback(hqspi);
-}
-
-/**
- * @brief This function wait a flag state until time out.
- * @param hqspi: QSPI handle
- * @param Flag: Flag checked
- * @param State: Value of the flag expected
- * @param Timeout: Duration of the time out
- * @retval HAL status
- */
-static HAL_StatusTypeDef QSPI_WaitFlagStateUntilTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Flag,
- FlagStatus State, uint32_t Timeout)
-{
- uint32_t tickstart = HAL_GetTick();
-
- /* Wait until flag is in expected state */
- while((FlagStatus)(__HAL_QSPI_GET_FLAG(hqspi, Flag)) != State)
- {
- /* Check for the Timeout */
- if (Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0) || ((HAL_GetTick() - tickstart) > Timeout))
- {
- hqspi->State = HAL_QSPI_STATE_ERROR;
- hqspi->ErrorCode |= HAL_QSPI_ERROR_TIMEOUT;
-
- return HAL_TIMEOUT;
- }
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief This function configures the communication registers
- * @param hqspi: QSPI handle
- * @param cmd: structure that contains the command configuration information
- * @param FunctionalMode: functional mode to configured
- * This parameter can be one of the following values:
- * @arg QSPI_FUNCTIONAL_MODE_INDIRECT_WRITE: Indirect write mode
- * @arg QSPI_FUNCTIONAL_MODE_INDIRECT_READ: Indirect read mode
- * @arg QSPI_FUNCTIONAL_MODE_AUTO_POLLING: Automatic polling mode
- * @arg QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED: Memory-mapped mode
- * @retval None
- */
-static void QSPI_Config(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t FunctionalMode)
-{
- assert_param(IS_QSPI_FUNCTIONAL_MODE(FunctionalMode));
-
- if ((cmd->DataMode != QSPI_DATA_NONE) && (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED))
- {
- /* Configure QSPI: DLR register with the number of data to read or write */
- WRITE_REG(hqspi->Instance->DLR, (cmd->NbData - 1));
- }
-
- if (cmd->InstructionMode != QSPI_INSTRUCTION_NONE)
- {
- if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
- {
- /* Configure QSPI: ABR register with alternate bytes value */
- WRITE_REG(hqspi->Instance->ABR, cmd->AlternateBytes);
-
- if (cmd->AddressMode != QSPI_ADDRESS_NONE)
- {
- /*---- Command with instruction, address and alternate bytes ----*/
- /* Configure QSPI: CCR register with all communications parameters */
- WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
- cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateBytesSize |
- cmd->AlternateByteMode | cmd->AddressSize | cmd->AddressMode |
- cmd->InstructionMode | cmd->Instruction | FunctionalMode));
-
- if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)
- {
- /* Configure QSPI: AR register with address value */
- WRITE_REG(hqspi->Instance->AR, cmd->Address);
- }
- }
- else
- {
- /*---- Command with instruction and alternate bytes ----*/
- /* Configure QSPI: CCR register with all communications parameters */
- WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
- cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateBytesSize |
- cmd->AlternateByteMode | cmd->AddressMode | cmd->InstructionMode |
- cmd->Instruction | FunctionalMode));
- }
- }
- else
- {
- if (cmd->AddressMode != QSPI_ADDRESS_NONE)
- {
- /*---- Command with instruction and address ----*/
- /* Configure QSPI: CCR register with all communications parameters */
- WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
- cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateByteMode |
- cmd->AddressSize | cmd->AddressMode | cmd->InstructionMode |
- cmd->Instruction | FunctionalMode));
-
- if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)
- {
- /* Configure QSPI: AR register with address value */
- WRITE_REG(hqspi->Instance->AR, cmd->Address);
- }
- }
- else
- {
- /*---- Command with only instruction ----*/
- /* Configure QSPI: CCR register with all communications parameters */
- WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
- cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateByteMode |
- cmd->AddressMode | cmd->InstructionMode | cmd->Instruction |
- FunctionalMode));
- }
- }
- }
- else
- {
- if (cmd->AlternateByteMode != QSPI_ALTERNATE_BYTES_NONE)
- {
- /* Configure QSPI: ABR register with alternate bytes value */
- WRITE_REG(hqspi->Instance->ABR, cmd->AlternateBytes);
-
- if (cmd->AddressMode != QSPI_ADDRESS_NONE)
- {
- /*---- Command with address and alternate bytes ----*/
- /* Configure QSPI: CCR register with all communications parameters */
- WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
- cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateBytesSize |
- cmd->AlternateByteMode | cmd->AddressSize | cmd->AddressMode |
- cmd->InstructionMode | FunctionalMode));
-
- if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)
- {
- /* Configure QSPI: AR register with address value */
- WRITE_REG(hqspi->Instance->AR, cmd->Address);
- }
- }
- else
- {
- /*---- Command with only alternate bytes ----*/
- /* Configure QSPI: CCR register with all communications parameters */
- WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
- cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateBytesSize |
- cmd->AlternateByteMode | cmd->AddressMode | cmd->InstructionMode |
- FunctionalMode));
- }
- }
- else
- {
- if (cmd->AddressMode != QSPI_ADDRESS_NONE)
- {
- /*---- Command with only address ----*/
- /* Configure QSPI: CCR register with all communications parameters */
- WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
- cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateByteMode |
- cmd->AddressSize | cmd->AddressMode | cmd->InstructionMode |
- FunctionalMode));
-
- if (FunctionalMode != QSPI_FUNCTIONAL_MODE_MEMORY_MAPPED)
- {
- /* Configure QSPI: AR register with address value */
- WRITE_REG(hqspi->Instance->AR, cmd->Address);
- }
- }
- else
- {
- /*---- Command with only data phase ----*/
- if (cmd->DataMode != QSPI_DATA_NONE)
- {
- /* Configure QSPI: CCR register with all communications parameters */
- WRITE_REG(hqspi->Instance->CCR, (cmd->DdrMode | cmd->DdrHoldHalfCycle | cmd->SIOOMode |
- cmd->DataMode | (cmd->DummyCycles << 18) | cmd->AlternateByteMode |
- cmd->AddressMode | cmd->InstructionMode | FunctionalMode));
- }
- }
- }
- }
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-#endif /* STM32F446xx */
-
-#endif /* HAL_QSPI_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c
deleted file mode 100644
index 30ce2f9..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c
+++ /dev/null
@@ -1,1234 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_rcc.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief RCC HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Reset and Clock Control (RCC) peripheral:
- * + Initialization and de-initialization functions
- * + Peripheral Control functions
- *
- @verbatim
- ==============================================================================
- ##### RCC specific features #####
- ==============================================================================
- [..]
- After reset the device is running from Internal High Speed oscillator
- (HSI 16MHz) with Flash 0 wait state, Flash prefetch buffer, D-Cache
- and I-Cache are disabled, and all peripherals are off except internal
- SRAM, Flash and JTAG.
- (+) There is no prescaler on High speed (AHB) and Low speed (APB) busses;
- all peripherals mapped on these busses are running at HSI speed.
- (+) The clock for all peripherals is switched off, except the SRAM and FLASH.
- (+) All GPIOs are in input floating state, except the JTAG pins which
- are assigned to be used for debug purpose.
-
- [..]
- Once the device started from reset, the user application has to:
- (+) Configure the clock source to be used to drive the System clock
- (if the application needs higher frequency/performance)
- (+) Configure the System clock frequency and Flash settings
- (+) Configure the AHB and APB busses prescalers
- (+) Enable the clock for the peripheral(s) to be used
- (+) Configure the clock source(s) for peripherals which clocks are not
- derived from the System clock (I2S, RTC, ADC, USB OTG FS/SDIO/RNG)
-
- ##### RCC Limitations #####
- ==============================================================================
- [..]
- A delay between an RCC peripheral clock enable and the effective peripheral
- enabling should be taken into account in order to manage the peripheral read/write
- from/to registers.
- (+) This delay depends on the peripheral mapping.
- (+) If peripheral is mapped on AHB: the delay is 2 AHB clock cycle
- after the clock enable bit is set on the hardware register
- (+) If peripheral is mapped on APB: the delay is 2 APB clock cycle
- after the clock enable bit is set on the hardware register
-
- [..]
- Possible Workarounds:
- (#) Enable the peripheral clock sometimes before the peripheral read/write
- register is required.
- (#) For AHB peripheral, insert two dummy read to the peripheral register.
- (#) For APB peripheral, insert a dummy read to the peripheral register.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup RCC RCC
- * @brief RCC HAL module driver
- * @{
- */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @addtogroup RCC_Private_Constants
- * @{
- */
-#define CLOCKSWITCH_TIMEOUT_VALUE ((uint32_t)5000) /* 5 s */
-
-/* Private macro -------------------------------------------------------------*/
-#define __MCO1_CLK_ENABLE() __HAL_RCC_GPIOA_CLK_ENABLE()
-#define MCO1_GPIO_PORT GPIOA
-#define MCO1_PIN GPIO_PIN_8
-
-#define __MCO2_CLK_ENABLE() __HAL_RCC_GPIOC_CLK_ENABLE()
-#define MCO2_GPIO_PORT GPIOC
-#define MCO2_PIN GPIO_PIN_9
-/**
- * @}
- */
-
-/* Private variables ---------------------------------------------------------*/
-/** @defgroup RCC_Private_Variables RCC Private Variables
- * @{
- */
-const uint8_t APBAHBPrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9};
-/**
- * @}
- */
-
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup RCC_Exported_Functions RCC Exported Functions
- * @{
- */
-
-/** @defgroup RCC_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..]
- This section provides functions allowing to configure the internal/external oscillators
- (HSE, HSI, LSE, LSI, PLL, CSS and MCO) and the System busses clocks (SYSCLK, AHB, APB1
- and APB2).
-
- [..] Internal/external clock and PLL configuration
- (#) HSI (high-speed internal), 16 MHz factory-trimmed RC used directly or through
- the PLL as System clock source.
-
- (#) LSI (low-speed internal), 32 KHz low consumption RC used as IWDG and/or RTC
- clock source.
-
- (#) HSE (high-speed external), 4 to 26 MHz crystal oscillator used directly or
- through the PLL as System clock source. Can be used also as RTC clock source.
-
- (#) LSE (low-speed external), 32 KHz oscillator used as RTC clock source.
-
- (#) PLL (clocked by HSI or HSE), featuring two different output clocks:
- (++) The first output is used to generate the high speed system clock (up to 168 MHz)
- (++) The second output is used to generate the clock for the USB OTG FS (48 MHz),
- the random analog generator (<=48 MHz) and the SDIO (<= 48 MHz).
-
- (#) CSS (Clock security system), once enable using the macro __HAL_RCC_CSS_ENABLE()
- and if a HSE clock failure occurs(HSE used directly or through PLL as System
- clock source), the System clocks automatically switched to HSI and an interrupt
- is generated if enabled. The interrupt is linked to the Cortex-M4 NMI
- (Non-Maskable Interrupt) exception vector.
-
- (#) MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL
- clock (through a configurable prescaler) on PA8 pin.
-
- (#) MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or PLLI2S
- clock (through a configurable prescaler) on PC9 pin.
-
- [..] System, AHB and APB busses clocks configuration
- (#) Several clock sources can be used to drive the System clock (SYSCLK): HSI,
- HSE and PLL.
- The AHB clock (HCLK) is derived from System clock through configurable
- prescaler and used to clock the CPU, memory and peripherals mapped
- on AHB bus (DMA, GPIO...). APB1 (PCLK1) and APB2 (PCLK2) clocks are derived
- from AHB clock through configurable prescalers and used to clock
- the peripherals mapped on these busses. You can use
- "HAL_RCC_GetSysClockFreq()" function to retrieve the frequencies of these clocks.
-
- -@- All the peripheral clocks are derived from the System clock (SYSCLK) except:
- (+@) I2S: the I2S clock can be derived either from a specific PLL (PLLI2S) or
- from an external clock mapped on the I2S_CKIN pin.
- You have to use __HAL_RCC_PLLI2S_CONFIG() macro to configure this clock.
- (+@) SAI: the SAI clock can be derived either from a specific PLL (PLLI2S) or (PLLSAI) or
- from an external clock mapped on the I2S_CKIN pin.
- You have to use __HAL_RCC_PLLI2S_CONFIG() macro to configure this clock.
- (+@) RTC: the RTC clock can be derived either from the LSI, LSE or HSE clock
- divided by 2 to 31. You have to use __HAL_RCC_RTC_CONFIG() and __HAL_RCC_RTC_ENABLE()
- macros to configure this clock.
- (+@) USB OTG FS, SDIO and RTC: USB OTG FS require a frequency equal to 48 MHz
- to work correctly, while the SDIO require a frequency equal or lower than
- to 48. This clock is derived of the main PLL through PLLQ divider.
- (+@) IWDG clock which is always the LSI clock.
-
- (#) For the STM32F405xx/07xx and STM32F415xx/17xx devices, the maximum
- frequency of the SYSCLK and HCLK is 168 MHz, PCLK2 84 MHz and PCLK1 42 MHz.
- Depending on the device voltage range, the maximum frequency should
- be adapted accordingly (refer to the product datasheets for more details).
-
- (#) For the STM32F42xxx and STM32F43xxx devices, the maximum frequency
- of the SYSCLK and HCLK is 180 MHz, PCLK2 90 MHz and PCLK1 45 MHz.
- Depending on the device voltage range, the maximum frequency should
- be adapted accordingly (refer to the product datasheets for more details).
-
- (#) For the STM32F401xx, the maximum frequency of the SYSCLK and HCLK is 84 MHz,
- PCLK2 84 MHz and PCLK1 42 MHz.
- Depending on the device voltage range, the maximum frequency should
- be adapted accordingly (refer to the product datasheets for more details).
-@endverbatim
- * @{
- */
-
-/**
- * @brief Resets the RCC clock configuration to the default reset state.
- * @note The default reset state of the clock configuration is given below:
- * - HSI ON and used as system clock source
- * - HSE, PLL and PLLI2S OFF
- * - AHB, APB1 and APB2 prescaler set to 1.
- * - CSS, MCO1 and MCO2 OFF
- * - All interrupts disabled
- * @note This function doesn't modify the configuration of the
- * - Peripheral clocks
- * - LSI, LSE and RTC clocks
- * @retval None
- */
-void HAL_RCC_DeInit(void)
-{
- /* Set HSION bit */
- SET_BIT(RCC->CR, RCC_CR_HSION | RCC_CR_HSITRIM_4);
-
- /* Reset CFGR register */
- CLEAR_REG(RCC->CFGR);
-
- /* Reset HSEON, CSSON, PLLON, PLLI2S */
- CLEAR_BIT(RCC->CR, RCC_CR_HSEON | RCC_CR_CSSON | RCC_CR_PLLON| RCC_CR_PLLI2SON);
-
- /* Reset PLLCFGR register */
- CLEAR_REG(RCC->PLLCFGR);
- SET_BIT(RCC->PLLCFGR, RCC_PLLCFGR_PLLM_4 | RCC_PLLCFGR_PLLN_6 | RCC_PLLCFGR_PLLN_7 | RCC_PLLCFGR_PLLQ_2);
-
- /* Reset PLLI2SCFGR register */
- CLEAR_REG(RCC->PLLI2SCFGR);
- SET_BIT(RCC->PLLI2SCFGR, RCC_PLLI2SCFGR_PLLI2SN_6 | RCC_PLLI2SCFGR_PLLI2SN_7 | RCC_PLLI2SCFGR_PLLI2SR_1);
-
- /* Reset HSEBYP bit */
- CLEAR_BIT(RCC->CR, RCC_CR_HSEBYP);
-
- /* Disable all interrupts */
- CLEAR_REG(RCC->CIR);
-}
-
-/**
- * @brief Initializes the RCC Oscillators according to the specified parameters in the
- * RCC_OscInitTypeDef.
- * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that
- * contains the configuration information for the RCC Oscillators.
- * @note The PLL is not disabled when used as system clock.
- * @retval HAL status
- */
-__weak HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
-{
- uint32_t tickstart = 0;
-
- /* Check the parameters */
- assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
- /*------------------------------- HSE Configuration ------------------------*/
- if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
- {
- /* Check the parameters */
- assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
- /* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */
- if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\
- ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)))
- {
- if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
- {
- return HAL_ERROR;
- }
- }
- else
- {
- /* Reset HSEON and HSEBYP bits before configuring the HSE --------------*/
- __HAL_RCC_HSE_CONFIG(RCC_HSE_OFF);
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till HSE is disabled */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Set the new HSE configuration ---------------------------------------*/
- __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
-
- /* Check the HSE State */
- if((RCC_OscInitStruct->HSEState) != RCC_HSE_OFF)
- {
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till HSE is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else
- {
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till HSE is bypassed or disabled */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- }
- }
- /*----------------------------- HSI Configuration --------------------------*/
- if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
- {
- /* Check the parameters */
- assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
- assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
-
- /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */
- if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\
- ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)))
- {
- /* When HSI is used as system clock it will not disabled */
- if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
- {
- return HAL_ERROR;
- }
- /* Otherwise, just the calibration is allowed */
- else
- {
- /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
- __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
- }
- }
- else
- {
- /* Check the HSI State */
- if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF)
- {
- /* Enable the Internal High Speed oscillator (HSI). */
- __HAL_RCC_HSI_ENABLE();
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till HSI is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
- __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
- }
- else
- {
- /* Disable the Internal High Speed oscillator (HSI). */
- __HAL_RCC_HSI_DISABLE();
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till HSI is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- }
- }
- /*------------------------------ LSI Configuration -------------------------*/
- if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
- {
- /* Check the parameters */
- assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
-
- /* Check the LSI State */
- if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF)
- {
- /* Enable the Internal Low Speed oscillator (LSI). */
- __HAL_RCC_LSI_ENABLE();
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till LSI is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else
- {
- /* Disable the Internal Low Speed oscillator (LSI). */
- __HAL_RCC_LSI_DISABLE();
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till LSI is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- }
- /*------------------------------ LSE Configuration -------------------------*/
- if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
- {
- /* Check the parameters */
- assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
-
- /* Enable Power Clock*/
- __HAL_RCC_PWR_CLK_ENABLE();
-
- /* Enable write access to Backup domain */
- PWR->CR |= PWR_CR_DBP;
-
- /* Wait for Backup domain Write protection disable */
- tickstart = HAL_GetTick();
-
- while((PWR->CR & PWR_CR_DBP) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Reset LSEON and LSEBYP bits before configuring the LSE ----------------*/
- __HAL_RCC_LSE_CONFIG(RCC_LSE_OFF);
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till LSE is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Set the new LSE configuration -----------------------------------------*/
- __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
- /* Check the LSE State */
- if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF)
- {
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till LSE is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else
- {
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till LSE is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- }
- /*-------------------------------- PLL Configuration -----------------------*/
- /* Check the parameters */
- assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
- if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
- {
- /* Check if the PLL is used as system clock or not */
- if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
- {
- if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
- {
- /* Check the parameters */
- assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
- assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM));
- assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN));
- assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP));
- assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ));
-
- /* Disable the main PLL. */
- __HAL_RCC_PLL_DISABLE();
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till PLL is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Configure the main PLL clock source, multiplication and division factors. */
- WRITE_REG(RCC->PLLCFGR, (RCC_OscInitStruct->PLL.PLLSource | \
- RCC_OscInitStruct->PLL.PLLM | \
- (RCC_OscInitStruct->PLL.PLLN << POSITION_VAL(RCC_PLLCFGR_PLLN)) | \
- (((RCC_OscInitStruct->PLL.PLLP >> 1) -1) << POSITION_VAL(RCC_PLLCFGR_PLLP)) | \
- (RCC_OscInitStruct->PLL.PLLQ << POSITION_VAL(RCC_PLLCFGR_PLLQ))));
- /* Enable the main PLL. */
- __HAL_RCC_PLL_ENABLE();
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till PLL is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else
- {
- /* Disable the main PLL. */
- __HAL_RCC_PLL_DISABLE();
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till PLL is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- }
- else
- {
- return HAL_ERROR;
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the CPU, AHB and APB busses clocks according to the specified
- * parameters in the RCC_ClkInitStruct.
- * @param RCC_ClkInitStruct: pointer to an RCC_OscInitTypeDef structure that
- * contains the configuration information for the RCC peripheral.
- * @param FLatency: FLASH Latency, this parameter depend on device selected
- *
- * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency
- * and updated by HAL_RCC_GetHCLKFreq() function called within this function
- *
- * @note The HSI is used (enabled by hardware) as system clock source after
- * startup from Reset, wake-up from STOP and STANDBY mode, or in case
- * of failure of the HSE used directly or indirectly as system clock
- * (if the Clock Security System CSS is enabled).
- *
- * @note A switch from one clock source to another occurs only if the target
- * clock source is ready (clock stable after startup delay or PLL locked).
- * If a clock source which is not yet ready is selected, the switch will
- * occur when the clock source will be ready.
- *
- * @note Depending on the device voltage range, the software has to set correctly
- * HPRE[3:0] bits to ensure that HCLK not exceed the maximum allowed frequency
- * (for more details refer to section above "Initialization/de-initialization functions")
- * @retval None
- */
-HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency)
-{
- uint32_t tickstart = 0;
-
- /* Check the parameters */
- assert_param(IS_RCC_CLOCKTYPE(RCC_ClkInitStruct->ClockType));
- assert_param(IS_FLASH_LATENCY(FLatency));
-
- /* To correctly read data from FLASH memory, the number of wait states (LATENCY)
- must be correctly programmed according to the frequency of the CPU clock
- (HCLK) and the supply voltage of the device. */
-
- /* Increasing the CPU frequency */
- if(FLatency > (FLASH->ACR & FLASH_ACR_LATENCY))
- {
- /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
- __HAL_FLASH_SET_LATENCY(FLatency);
-
- /* Check that the new number of wait states is taken into account to access the Flash
- memory by reading the FLASH_ACR register */
- if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency)
- {
- return HAL_ERROR;
- }
-
- /*-------------------------- HCLK Configuration --------------------------*/
- if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
- {
- assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider));
- MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
- }
-
- /*------------------------- SYSCLK Configuration ---------------------------*/
- if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
- {
- assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
-
- /* HSE is selected as System Clock Source */
- if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
- {
- /* Check the HSE ready flag */
- if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
- {
- return HAL_ERROR;
- }
- }
- /* PLL is selected as System Clock Source */
- else if((RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) ||
- (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLRCLK))
- {
- /* Check the PLL ready flag */
- if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
- {
- return HAL_ERROR;
- }
- }
- /* HSI is selected as System Clock Source */
- else
- {
- /* Check the HSI ready flag */
- if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
- {
- return HAL_ERROR;
- }
- }
-
- __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource);
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
- {
- while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSE)
- {
- if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
- {
- while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
- {
- if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLRCLK)
- {
- while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLRCLK)
- {
- if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else
- {
- while(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSI)
- {
- if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- }
- }
- /* Decreasing the CPU frequency */
- else
- {
- /*-------------------------- HCLK Configuration --------------------------*/
- if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_HCLK) == RCC_CLOCKTYPE_HCLK)
- {
- assert_param(IS_RCC_HCLK(RCC_ClkInitStruct->AHBCLKDivider));
- MODIFY_REG(RCC->CFGR, RCC_CFGR_HPRE, RCC_ClkInitStruct->AHBCLKDivider);
- }
-
- /*------------------------- SYSCLK Configuration -------------------------*/
- if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_SYSCLK) == RCC_CLOCKTYPE_SYSCLK)
- {
- assert_param(IS_RCC_SYSCLKSOURCE(RCC_ClkInitStruct->SYSCLKSource));
-
- /* HSE is selected as System Clock Source */
- if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
- {
- /* Check the HSE ready flag */
- if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
- {
- return HAL_ERROR;
- }
- }
- /* PLL is selected as System Clock Source */
- else if((RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK) ||
- (RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLRCLK))
- {
- /* Check the PLL ready flag */
- if(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
- {
- return HAL_ERROR;
- }
- }
- /* HSI is selected as System Clock Source */
- else
- {
- /* Check the HSI ready flag */
- if(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
- {
- return HAL_ERROR;
- }
- }
- __HAL_RCC_SYSCLK_CONFIG(RCC_ClkInitStruct->SYSCLKSource);
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_HSE)
- {
- while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSE)
- {
- if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLCLK)
- {
- while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLCLK)
- {
- if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else if(RCC_ClkInitStruct->SYSCLKSource == RCC_SYSCLKSOURCE_PLLRCLK)
- {
- while (__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_PLLRCLK)
- {
- if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else
- {
- while(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_SYSCLKSOURCE_STATUS_HSI)
- {
- if((HAL_GetTick() - tickstart ) > CLOCKSWITCH_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- }
-
- /* Program the new number of wait states to the LATENCY bits in the FLASH_ACR register */
- __HAL_FLASH_SET_LATENCY(FLatency);
-
- /* Check that the new number of wait states is taken into account to access the Flash
- memory by reading the FLASH_ACR register */
- if((FLASH->ACR & FLASH_ACR_LATENCY) != FLatency)
- {
- return HAL_ERROR;
- }
- }
-
- /*-------------------------- PCLK1 Configuration ---------------------------*/
- if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK1) == RCC_CLOCKTYPE_PCLK1)
- {
- assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB1CLKDivider));
- MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE1, RCC_ClkInitStruct->APB1CLKDivider);
- }
-
- /*-------------------------- PCLK2 Configuration ---------------------------*/
- if(((RCC_ClkInitStruct->ClockType) & RCC_CLOCKTYPE_PCLK2) == RCC_CLOCKTYPE_PCLK2)
- {
- assert_param(IS_RCC_PCLK(RCC_ClkInitStruct->APB2CLKDivider));
- MODIFY_REG(RCC->CFGR, RCC_CFGR_PPRE2, ((RCC_ClkInitStruct->APB2CLKDivider) << 3));
- }
-
- /* Configure the source of time base considering new system clocks settings*/
- HAL_InitTick (TICK_INT_PRIORITY);
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup RCC_Exported_Functions_Group2 Peripheral Control functions
- * @brief RCC clocks control functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Control functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to control the RCC Clocks
- frequencies.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Selects the clock source to output on MCO1 pin(PA8) or on MCO2 pin(PC9).
- * @note PA8/PC9 should be configured in alternate function mode.
- * @param RCC_MCOx: specifies the output direction for the clock source.
- * This parameter can be one of the following values:
- * @arg RCC_MCO1: Clock source to output on MCO1 pin(PA8).
- * @arg RCC_MCO2: Clock source to output on MCO2 pin(PC9).
- * @param RCC_MCOSource: specifies the clock source to output.
- * This parameter can be one of the following values:
- * @arg RCC_MCO1SOURCE_HSI: HSI clock selected as MCO1 source
- * @arg RCC_MCO1SOURCE_LSE: LSE clock selected as MCO1 source
- * @arg RCC_MCO1SOURCE_HSE: HSE clock selected as MCO1 source
- * @arg RCC_MCO1SOURCE_PLLCLK: main PLL clock selected as MCO1 source
- * @arg RCC_MCO2SOURCE_SYSCLK: System clock (SYSCLK) selected as MCO2 source
- * @arg RCC_MCO2SOURCE_PLLI2SCLK: PLLI2S clock selected as MCO2 source
- * @arg RCC_MCO2SOURCE_HSE: HSE clock selected as MCO2 source
- * @arg RCC_MCO2SOURCE_PLLCLK: main PLL clock selected as MCO2 source
- * @param RCC_MCODiv: specifies the MCOx prescaler.
- * This parameter can be one of the following values:
- * @arg RCC_MCODIV_1: no division applied to MCOx clock
- * @arg RCC_MCODIV_2: division by 2 applied to MCOx clock
- * @arg RCC_MCODIV_3: division by 3 applied to MCOx clock
- * @arg RCC_MCODIV_4: division by 4 applied to MCOx clock
- * @arg RCC_MCODIV_5: division by 5 applied to MCOx clock
- * @retval None
- */
-void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv)
-{
- GPIO_InitTypeDef GPIO_InitStruct;
- /* Check the parameters */
- assert_param(IS_RCC_MCO(RCC_MCOx));
- assert_param(IS_RCC_MCODIV(RCC_MCODiv));
- /* RCC_MCO1 */
- if(RCC_MCOx == RCC_MCO1)
- {
- assert_param(IS_RCC_MCO1SOURCE(RCC_MCOSource));
-
- /* MCO1 Clock Enable */
- __MCO1_CLK_ENABLE();
-
- /* Configure the MCO1 pin in alternate function mode */
- GPIO_InitStruct.Pin = MCO1_PIN;
- GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
- GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
- HAL_GPIO_Init(MCO1_GPIO_PORT, &GPIO_InitStruct);
-
- /* Mask MCO1 and MCO1PRE[2:0] bits then Select MCO1 clock source and prescaler */
- MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO1 | RCC_CFGR_MCO1PRE), (RCC_MCOSource | RCC_MCODiv));
- }
- else
- {
- assert_param(IS_RCC_MCO2SOURCE(RCC_MCOSource));
-
- /* MCO2 Clock Enable */
- __MCO2_CLK_ENABLE();
-
- /* Configure the MCO2 pin in alternate function mode */
- GPIO_InitStruct.Pin = MCO2_PIN;
- GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
- GPIO_InitStruct.Speed = GPIO_SPEED_HIGH;
- GPIO_InitStruct.Pull = GPIO_NOPULL;
- GPIO_InitStruct.Alternate = GPIO_AF0_MCO;
- HAL_GPIO_Init(MCO2_GPIO_PORT, &GPIO_InitStruct);
-
- /* Mask MCO2 and MCO2PRE[2:0] bits then Select MCO2 clock source and prescaler */
- MODIFY_REG(RCC->CFGR, (RCC_CFGR_MCO2 | RCC_CFGR_MCO2PRE), (RCC_MCOSource | (RCC_MCODiv << 3)));
- }
-}
-
-/**
- * @brief Enables the Clock Security System.
- * @note If a failure is detected on the HSE oscillator clock, this oscillator
- * is automatically disabled and an interrupt is generated to inform the
- * software about the failure (Clock Security System Interrupt, CSSI),
- * allowing the MCU to perform rescue operations. The CSSI is linked to
- * the Cortex-M4 NMI (Non-Maskable Interrupt) exception vector.
- * @retval None
- */
-void HAL_RCC_EnableCSS(void)
-{
- *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)ENABLE;
-}
-
-/**
- * @brief Disables the Clock Security System.
- * @retval None
- */
-void HAL_RCC_DisableCSS(void)
-{
- *(__IO uint32_t *) RCC_CR_CSSON_BB = (uint32_t)DISABLE;
-}
-
-/**
- * @brief Returns the SYSCLK frequency
- *
- * @note The system frequency computed by this function is not the real
- * frequency in the chip. It is calculated based on the predefined
- * constant and the selected clock source:
- * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*)
- * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**)
- * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**)
- * or HSI_VALUE(*) multiplied/divided by the PLL factors.
- * @note (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
- * 16 MHz) but the real value may vary depending on the variations
- * in voltage and temperature.
- * @note (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
- * 25 MHz), user has to ensure that HSE_VALUE is same as the real
- * frequency of the crystal used. Otherwise, this function may
- * have wrong result.
- *
- * @note The result of this function could be not correct when using fractional
- * value for HSE crystal.
- *
- * @note This function can be used by the user application to compute the
- * baudrate for the communication peripherals or configure other parameters.
- *
- * @note Each time SYSCLK changes, this function must be called to update the
- * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
- *
- *
- * @retval SYSCLK frequency
- */
-__weak uint32_t HAL_RCC_GetSysClockFreq(void)
-{
- uint32_t pllm = 0, pllvco = 0, pllp = 0;
- uint32_t sysclockfreq = 0;
-
- /* Get SYSCLK source -------------------------------------------------------*/
- switch (RCC->CFGR & RCC_CFGR_SWS)
- {
- case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */
- {
- sysclockfreq = HSI_VALUE;
- break;
- }
- case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */
- {
- sysclockfreq = HSE_VALUE;
- break;
- }
- case RCC_CFGR_SWS_PLL: /* PLL used as system clock source */
- {
- /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
- SYSCLK = PLL_VCO / PLLP */
- pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
- if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI)
- {
- /* HSE used as PLL clock source */
- pllvco = ((HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
- }
- else
- {
- /* HSI used as PLL clock source */
- pllvco = ((HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
- }
- pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> POSITION_VAL(RCC_PLLCFGR_PLLP)) + 1 ) *2);
-
- sysclockfreq = pllvco/pllp;
- break;
- }
- default:
- {
- sysclockfreq = HSI_VALUE;
- break;
- }
- }
- return sysclockfreq;
-}
-
-/**
- * @brief Returns the HCLK frequency
- * @note Each time HCLK changes, this function must be called to update the
- * right HCLK value. Otherwise, any configuration based on this function will be incorrect.
- *
- * @note The SystemCoreClock CMSIS variable is used to store System Clock Frequency
- * and updated within this function
- * @retval HCLK frequency
- */
-uint32_t HAL_RCC_GetHCLKFreq(void)
-{
- SystemCoreClock = HAL_RCC_GetSysClockFreq() >> APBAHBPrescTable[(RCC->CFGR & RCC_CFGR_HPRE)>> POSITION_VAL(RCC_CFGR_HPRE)];
- return SystemCoreClock;
-}
-
-/**
- * @brief Returns the PCLK1 frequency
- * @note Each time PCLK1 changes, this function must be called to update the
- * right PCLK1 value. Otherwise, any configuration based on this function will be incorrect.
- * @retval PCLK1 frequency
- */
-uint32_t HAL_RCC_GetPCLK1Freq(void)
-{
- /* Get HCLK source and Compute PCLK1 frequency ---------------------------*/
- return (HAL_RCC_GetHCLKFreq() >> APBAHBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE1)>> POSITION_VAL(RCC_CFGR_PPRE1)]);
-}
-
-/**
- * @brief Returns the PCLK2 frequency
- * @note Each time PCLK2 changes, this function must be called to update the
- * right PCLK2 value. Otherwise, any configuration based on this function will be incorrect.
- * @retval PCLK2 frequency
- */
-uint32_t HAL_RCC_GetPCLK2Freq(void)
-{
- /* Get HCLK source and Compute PCLK2 frequency ---------------------------*/
- return (HAL_RCC_GetHCLKFreq()>> APBAHBPrescTable[(RCC->CFGR & RCC_CFGR_PPRE2)>> POSITION_VAL(RCC_CFGR_PPRE2)]);
-}
-
-/**
- * @brief Configures the RCC_OscInitStruct according to the internal
- * RCC configuration registers.
- * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that
- * will be configured.
- * @retval None
- */
-__weak void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
-{
- /* Set all possible values for the Oscillator type parameter ---------------*/
- RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI;
-
- /* Get the HSE configuration -----------------------------------------------*/
- if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
- {
- RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
- }
- else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON)
- {
- RCC_OscInitStruct->HSEState = RCC_HSE_ON;
- }
- else
- {
- RCC_OscInitStruct->HSEState = RCC_HSE_OFF;
- }
-
- /* Get the HSI configuration -----------------------------------------------*/
- if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION)
- {
- RCC_OscInitStruct->HSIState = RCC_HSI_ON;
- }
- else
- {
- RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
- }
-
- RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> POSITION_VAL(RCC_CR_HSITRIM));
-
- /* Get the LSE configuration -----------------------------------------------*/
- if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
- {
- RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
- }
- else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
- {
- RCC_OscInitStruct->LSEState = RCC_LSE_ON;
- }
- else
- {
- RCC_OscInitStruct->LSEState = RCC_LSE_OFF;
- }
-
- /* Get the LSI configuration -----------------------------------------------*/
- if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION)
- {
- RCC_OscInitStruct->LSIState = RCC_LSI_ON;
- }
- else
- {
- RCC_OscInitStruct->LSIState = RCC_LSI_OFF;
- }
-
- /* Get the PLL configuration -----------------------------------------------*/
- if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON)
- {
- RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
- }
- else
- {
- RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF;
- }
- RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
- RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM);
- RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN));
- RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1) >> POSITION_VAL(RCC_PLLCFGR_PLLP));
- RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> POSITION_VAL(RCC_PLLCFGR_PLLQ));
-}
-
-/**
- * @brief Configures the RCC_ClkInitStruct according to the internal
- * RCC configuration registers.
- * @param RCC_ClkInitStruct: pointer to an RCC_ClkInitTypeDef structure that
- * will be configured.
- * @param pFLatency: Pointer on the Flash Latency.
- * @retval None
- */
-void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency)
-{
- /* Set all possible values for the Clock type parameter --------------------*/
- RCC_ClkInitStruct->ClockType = RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
-
- /* Get the SYSCLK configuration --------------------------------------------*/
- RCC_ClkInitStruct->SYSCLKSource = (uint32_t)(RCC->CFGR & RCC_CFGR_SW);
-
- /* Get the HCLK configuration ----------------------------------------------*/
- RCC_ClkInitStruct->AHBCLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_HPRE);
-
- /* Get the APB1 configuration ----------------------------------------------*/
- RCC_ClkInitStruct->APB1CLKDivider = (uint32_t)(RCC->CFGR & RCC_CFGR_PPRE1);
-
- /* Get the APB2 configuration ----------------------------------------------*/
- RCC_ClkInitStruct->APB2CLKDivider = (uint32_t)((RCC->CFGR & RCC_CFGR_PPRE2) >> 3);
-
- /* Get the Flash Wait State (Latency) configuration ------------------------*/
- *pFLatency = (uint32_t)(FLASH->ACR & FLASH_ACR_LATENCY);
-}
-
-/**
- * @brief This function handles the RCC CSS interrupt request.
- * @note This API should be called under the NMI_Handler().
- * @retval None
- */
-void HAL_RCC_NMI_IRQHandler(void)
-{
- /* Check RCC CSSF flag */
- if(__HAL_RCC_GET_IT(RCC_IT_CSS))
- {
- /* RCC Clock Security System interrupt user callback */
- HAL_RCC_CSSCallback();
-
- /* Clear RCC CSS pending bit */
- __HAL_RCC_CLEAR_IT(RCC_IT_CSS);
- }
-}
-
-/**
- * @brief RCC Clock Security System interrupt callback
- * @retval None
- */
-__weak void HAL_RCC_CSSCallback(void)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_RCC_CSSCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_RCC_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c
deleted file mode 100644
index 37df30e..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc_ex.c
+++ /dev/null
@@ -1,1676 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_rcc_ex.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief Extension RCC HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities RCC extension peripheral:
- * + Extended Peripheral Control functions
- *
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup RCCEx RCCEx
- * @brief RCCEx HAL module driver
- * @{
- */
-
-#ifdef HAL_RCC_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @addtogroup RCCEx_Private_Constants
- * @{
- */
-/**
- * @}
- */
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/** @defgroup RCCEx_Exported_Functions RCCEx Exported Functions
- * @{
- */
-
-/** @defgroup RCCEx_Exported_Functions_Group1 Extended Peripheral Control functions
- * @brief Extended Peripheral Control functions
- *
-@verbatim
- ===============================================================================
- ##### Extended Peripheral Control functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to control the RCC Clocks
- frequencies.
- [..]
- (@) Important note: Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to
- select the RTC clock source; in this case the Backup domain will be reset in
- order to modify the RTC Clock source, as consequence RTC registers (including
- the backup registers) and RCC_BDCR register are set to their reset values.
-
-@endverbatim
- * @{
- */
-#if defined(STM32F446xx)
-/**
- * @brief Initializes the RCC extended peripherals clocks according to the specified
- * parameters in the RCC_PeriphCLKInitTypeDef.
- * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
- * contains the configuration information for the Extended Peripherals
- * clocks(I2S, SAI, LTDC RTC and TIM).
- *
- * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
- * the RTC clock source; in this case the Backup domain will be reset in
- * order to modify the RTC Clock source, as consequence RTC registers (including
- * the backup registers) and RCC_BDCR register are set to their reset values.
- *
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
-{
- uint32_t tickstart = 0;
- uint32_t tmpreg1 = 0;
- uint32_t plli2sp = 0;
- uint32_t plli2sq = 0;
- uint32_t plli2sr = 0;
- uint32_t pllsaip = 0;
- uint32_t pllsaiq = 0;
- uint32_t plli2sused = 0;
- uint32_t pllsaiused = 0;
-
- /* Check the peripheral clock selection parameters */
- assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
-
- /*----------------------------------- I2S APB1 configuration ----------------------------------*/
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == (RCC_PERIPHCLK_I2S_APB1))
- {
- /* Check the parameters */
- assert_param(IS_RCC_I2SAPB1CLKSOURCE(PeriphClkInit->I2sApb1ClockSelection));
-
- /* Configure I2S Clock source */
- __HAL_RCC_I2S_APB1_CONFIG(PeriphClkInit->I2sApb1ClockSelection);
- /* Enable the PLLI2S when it's used as clock source for I2S */
- if(PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)
- {
- plli2sused = 1;
- }
- }
-
- /*----------------------------------- I2S APB2 configuration -----------------------------------*/
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == (RCC_PERIPHCLK_I2S_APB2))
- {
- /* Check the parameters */
- assert_param(IS_RCC_I2SAPB2CLKSOURCE(PeriphClkInit->I2sApb2ClockSelection));
-
- /* Configure I2S Clock source */
- __HAL_RCC_I2S_APB2_CONFIG(PeriphClkInit->I2sApb2ClockSelection);
- /* Enable the PLLI2S when it's used as clock source for I2S */
- if(PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S)
- {
- plli2sused = 1;
- }
- }
-
- /*------------------------------------ SAI1 configuration --------------------------------------*/
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == (RCC_PERIPHCLK_SAI1))
- {
- /* Check the parameters */
- assert_param(IS_RCC_SAI1CLKSOURCE(PeriphClkInit->Sai1ClockSelection));
-
- /* Configure SAI1 Clock source */
- __HAL_RCC_SAI1_CONFIG(PeriphClkInit->Sai1ClockSelection);
- /* Enable the PLLI2S when it's used as clock source for SAI */
- if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)
- {
- plli2sused = 1;
- }
- /* Enable the PLLSAI when it's used as clock source for SAI */
- if(PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)
- {
- pllsaiused = 1;
- }
- }
-
- /*------------------------------------ SAI2 configuration --------------------------------------*/
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == (RCC_PERIPHCLK_SAI2))
- {
- /* Check the parameters */
- assert_param(IS_RCC_SAI2CLKSOURCE(PeriphClkInit->Sai2ClockSelection));
-
- /* Configure SAI2 Clock source */
- __HAL_RCC_SAI2_CONFIG(PeriphClkInit->Sai2ClockSelection);
-
- /* Enable the PLLI2S when it's used as clock source for SAI */
- if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S)
- {
- plli2sused = 1;
- }
- /* Enable the PLLSAI when it's used as clock source for SAI */
- if(PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI)
- {
- pllsaiused = 1;
- }
- }
-
- /*------------------------------------ RTC configuration --------------------------------------*/
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
- {
- /* Enable Power Clock*/
- __HAL_RCC_PWR_CLK_ENABLE();
-
- /* Enable write access to Backup domain */
- PWR->CR |= PWR_CR_DBP;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((PWR->CR & PWR_CR_DBP) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- /* Reset the Backup domain only if the RTC Clock source selction is modified */
- if((RCC->BDCR & RCC_BDCR_RTCSEL) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))
- {
- /* Store the content of BDCR register before the reset of Backup Domain */
- tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
- /* RTC Clock selection can be changed only if the Backup Domain is reset */
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
- /* Restore the Content of BDCR register */
- RCC->BDCR = tmpreg1;
-
- /* Wait for LSERDY if LSE was enabled */
- if(HAL_IS_BIT_SET(tmpreg1, RCC_BDCR_LSERDY))
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait till LSE is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
- }
- }
-
- /*------------------------------------ TIM configuration --------------------------------------*/
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
- {
- /* Configure Timer Prescaler */
- __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
- }
-
- /*------------------------------------- FMPI2C1 Configuration ----------------------------------*/
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_FMPI2C1) == RCC_PERIPHCLK_FMPI2C1)
- {
- /* Check the parameters */
- assert_param(IS_RCC_FMPI2C1CLKSOURCE(PeriphClkInit->Fmpi2c1ClockSelection));
-
- /* Configure the FMPI2C1 clock source */
- __HAL_RCC_FMPI2C1_CONFIG(PeriphClkInit->Fmpi2c1ClockSelection);
- }
-
- /*--------------------------------------- CEC Configuration -----------------------------------*/
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CEC) == RCC_PERIPHCLK_CEC)
- {
- /* Check the parameters */
- assert_param(IS_RCC_CECCLKSOURCE(PeriphClkInit->CecClockSelection));
-
- /* Configure the CEC clock source */
- __HAL_RCC_CEC_CONFIG(PeriphClkInit->CecClockSelection);
- }
-
- /*-------------------------------------- CK48 Configuration -----------------------------------*/
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CK48) == RCC_PERIPHCLK_CK48)
- {
- /* Check the parameters */
- assert_param(IS_RCC_CK48CLKSOURCE(PeriphClkInit->Clk48ClockSelection));
-
- /* Configure the SDIO clock source */
- __HAL_RCC_CLK48_CONFIG(PeriphClkInit->Clk48ClockSelection);
-
- /* Enable the PLLSAI when it's used as clock source for CK48 */
- if(PeriphClkInit->Clk48ClockSelection == RCC_CK48CLKSOURCE_PLLSAIP)
- {
- pllsaiused = 1;
- }
- }
-
- /*------------------------------------- SDIO Configuration ------------------------------------*/
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SDIO) == RCC_PERIPHCLK_SDIO)
- {
- /* Check the parameters */
- assert_param(IS_RCC_SDIOCLKSOURCE(PeriphClkInit->SdioClockSelection));
-
- /* Configure the SDIO clock source */
- __HAL_RCC_SDIO_CONFIG(PeriphClkInit->SdioClockSelection);
- }
-
- /*------------------------------------- SPDIFRX Configuration --------------*/
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX)
- {
- /* Check the parameters */
- assert_param(IS_RCC_SPDIFRXCLKSOURCE(PeriphClkInit->SpdifClockSelection));
-
- /* Configure the SPDIFRX clock source */
- __HAL_RCC_SPDIFRX_CONFIG(PeriphClkInit->SpdifClockSelection);
- /* Enable the PLLI2S when it's used as clock source for SPDIFRX */
- if(PeriphClkInit->SpdifClockSelection == RCC_SPDIFRXCLKSOURCE_PLLI2SP)
- {
- plli2sused = 1;
- }
- }
-
- /*-------------------------------------- PLLI2S Configuration --------------*/
- /* PLLI2S is configured when a peripheral will use it as source clock : SAI1, SAI2, I2S on APB1,
- I2S on APB2 or SPDIFRX */
- if((plli2sused == 1) || (PeriphClkInit->PeriphClockSelection == RCC_PERIPHCLK_PLLI2S))
- {
- /* Disable the PLLI2S */
- __HAL_RCC_PLLI2S_DISABLE();
- /* Get tick */
- tickstart = HAL_GetTick();
- /* Wait till PLLI2S is disabled */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
- {
- /* return in case of Timeout detected */
- return HAL_TIMEOUT;
- }
- }
-
- /* check for common PLLI2S Parameters */
- assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM));
- assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
-
- /*----------------- In Case of PLLI2S is selected as source clock for I2S -------------------*/
- if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB1) == RCC_PERIPHCLK_I2S_APB1) && (PeriphClkInit->I2sApb1ClockSelection == RCC_I2SAPB1CLKSOURCE_PLLI2S)) ||
- ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S_APB2) == RCC_PERIPHCLK_I2S_APB2) && (PeriphClkInit->I2sApb2ClockSelection == RCC_I2SAPB2CLKSOURCE_PLLI2S)))
- {
- /* check for Parameters */
- assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
-
- /* Read PLLI2SP/PLLI2SQ value from PLLI2SCFGR register (this value is not needed for I2S configuration) */
- plli2sp = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) + 1) << 1);
- plli2sq = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
- /* Configure the PLLI2S division factors */
- /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) × (PLLI2SN/PLLI2SM) */
- /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
- __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , plli2sp, plli2sq, PeriphClkInit->PLLI2S.PLLI2SR);
- }
-
- /*----------------- In Case of PLLI2S is selected as source clock for SAI -------------------*/
- if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLI2S)) ||
- ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLI2S)))
- {
- /* Check for PLLI2S Parameters */
- assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
- /* Check for PLLI2S/DIVQ parameters */
- assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ));
-
- /* Read PLLI2SP/PLLI2SR value from PLLI2SCFGR register (this value is not needed for SAI configuration) */
- plli2sp = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) + 1) << 1);
- plli2sr = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
- /* Configure the PLLI2S division factors */
- /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */
- /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
- /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
- __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , plli2sp, PeriphClkInit->PLLI2S.PLLI2SQ, plli2sr);
-
- /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
- __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ);
- }
-
- /*----------------- In Case of PLLI2S is selected as source clock for SPDIFRX -------------------*/
- if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SPDIFRX) == RCC_PERIPHCLK_SPDIFRX) && (PeriphClkInit->SpdifClockSelection == RCC_SPDIFRXCLKSOURCE_PLLI2SP))
- {
- /* check for Parameters */
- assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP));
- /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */
- plli2sq = ((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) + 1) << 1);
- plli2sr = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
- /* Configure the PLLI2S division factors */
- /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) × (PLLI2SN/PLLI2SM) */
- /* SPDIFRXCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SP */
- __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, plli2sq, plli2sr);
- }
-
- /*----------------- In Case of PLLI2S is just selected -----------------*/
- if((PeriphClkInit->PeriphClockSelection & RCC_PERIPHCLK_PLLI2S) == RCC_PERIPHCLK_PLLI2S)
- {
- /* Check for Parameters */
- assert_param(IS_RCC_PLLI2SP_VALUE(PeriphClkInit->PLLI2S.PLLI2SP));
- assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
- assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
-
- /* Configure the PLLI2S division factors */
- /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) × (PLLI2SN/PLLI2SM) */
- __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SP, PeriphClkInit->PLLI2S.PLLI2SQ, PeriphClkInit->PLLI2S.PLLI2SR);
- }
-
- /* Enable the PLLI2S */
- __HAL_RCC_PLLI2S_ENABLE();
- /* Get tick */
- tickstart = HAL_GetTick();
- /* Wait till PLLI2S is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
- {
- /* return in case of Timeout detected */
- return HAL_TIMEOUT;
- }
- }
- }
- /*-------------------------------------- PLLSAI Configuration ---------------------------------*/
- /* PLLSAI is configured when a peripheral will use it as source clock : SAI1, SAI2, CK48 or SDIO */
- if(pllsaiused == 1)
- {
- /* Disable PLLSAI Clock */
- __HAL_RCC_PLLSAI_DISABLE();
- /* Get tick */
- tickstart = HAL_GetTick();
- /* Wait till PLLSAI is disabled */
- while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
- {
- /* return in case of Timeout detected */
- return HAL_TIMEOUT;
- }
- }
-
- /* Check the PLLSAI division factors */
- assert_param(IS_RCC_PLLSAIM_VALUE(PeriphClkInit->PLLSAI.PLLSAIM));
- assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN));
-
- /*----------------- In Case of PLLSAI is selected as source clock for SAI -------------------*/
- if(((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI1) == RCC_PERIPHCLK_SAI1) && (PeriphClkInit->Sai1ClockSelection == RCC_SAI1CLKSOURCE_PLLSAI)) ||
- ((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI2) == RCC_PERIPHCLK_SAI2) && (PeriphClkInit->Sai2ClockSelection == RCC_SAI2CLKSOURCE_PLLSAI)))
- {
- /* check for PLLSAIQ Parameter */
- assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ));
- /* check for PLLSAI/DIVQ Parameter */
- assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ));
-
- /* Read PLLSAIP value from PLLSAICFGR register (this value is not needed for SAI configuration) */
- pllsaip = ((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) + 1) << 1);
- /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
- /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
- /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
- __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIM, PeriphClkInit->PLLSAI.PLLSAIN , pllsaip, PeriphClkInit->PLLSAI.PLLSAIQ, 0);
-
- /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
- __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ);
- }
-
- /*----------------- In Case of PLLSAI is selected as source clock for CK48 -------------------*/
- /* In Case of PLLI2S is selected as source clock for CK48 */
- if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_CK48) == RCC_PERIPHCLK_CK48) && (PeriphClkInit->Clk48ClockSelection == RCC_CK48CLKSOURCE_PLLSAIP))
- {
- /* check for Parameters */
- assert_param(IS_RCC_PLLSAIP_VALUE(PeriphClkInit->PLLSAI.PLLSAIP));
- /* Read PLLSAIQ value from PLLI2SCFGR register (this value is not need for SAI configuration) */
- pllsaiq = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
- /* Configure the PLLSAI division factors */
- /* PLLSAI_VCO = f(VCO clock) = f(PLLSAI clock input) × (PLLI2SN/PLLSAIM) */
- /* 48CLK = f(PLLSAI clock output) = f(VCO clock) / PLLSAIP */
- __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIM, PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIP, pllsaiq, 0);
- }
-
- /* Enable PLLSAI Clock */
- __HAL_RCC_PLLSAI_ENABLE();
- /* Get tick */
- tickstart = HAL_GetTick();
- /* Wait till PLLSAI is ready */
- while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
- {
- /* return in case of Timeout detected */
- return HAL_TIMEOUT;
- }
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief Get the RCC_PeriphCLKInitTypeDef according to the internal
- * RCC configuration registers.
- * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
- * will be configured.
- * @retval None
- */
-void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
-{
- uint32_t tempreg;
-
- /* Set all possible values for the extended clock type parameter------------*/
- PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S_APB1 | RCC_PERIPHCLK_I2S_APB2 |\
- RCC_PERIPHCLK_SAI1 | RCC_PERIPHCLK_SAI2 |\
- RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC |\
- RCC_PERIPHCLK_CEC | RCC_PERIPHCLK_FMPI2C1 |\
- RCC_PERIPHCLK_CK48 | RCC_PERIPHCLK_SDIO |\
- RCC_PERIPHCLK_SPDIFRX;
-
- /* Get the PLLI2S Clock configuration -----------------------------------------------*/
- PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SM));
- PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN));
- PeriphClkInit->PLLI2S.PLLI2SP = (uint32_t)((((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SP) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) + 1) << 1);
- PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
- PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
- /* Get the PLLSAI Clock configuration -----------------------------------------------*/
- PeriphClkInit->PLLSAI.PLLSAIM = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIM));
- PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN));
- PeriphClkInit->PLLSAI.PLLSAIP = (uint32_t)((((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIP) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) + 1) << 1);
- PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
- /* Get the PLLSAI/PLLI2S division factors -------------------------------------------*/
- PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLI2SDIVQ));
- PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLSAIDIVQ));
-
- /* Get the SAI1 clock configuration ----------------------------------------------*/
- PeriphClkInit->Sai1ClockSelection = __HAL_RCC_GET_SAI1_SOURCE();
-
- /* Get the SAI2 clock configuration ----------------------------------------------*/
- PeriphClkInit->Sai2ClockSelection = __HAL_RCC_GET_SAI2_SOURCE();
-
- /* Get the I2S APB1 clock configuration ------------------------------------------*/
- PeriphClkInit->I2sApb1ClockSelection = __HAL_RCC_GET_I2S_APB1_SOURCE();
-
- /* Get the I2S APB2 clock configuration ------------------------------------------*/
- PeriphClkInit->I2sApb2ClockSelection = __HAL_RCC_GET_I2S_APB2_SOURCE();
-
- /* Get the RTC Clock configuration -----------------------------------------------*/
- tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
- PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
-
- /* Get the CEC clock configuration -----------------------------------------------*/
- PeriphClkInit->CecClockSelection = __HAL_RCC_GET_CEC_SOURCE();
-
- /* Get the FMPI2C1 clock configuration -----------------------------------------------*/
- PeriphClkInit->Fmpi2c1ClockSelection = __HAL_RCC_GET_FMPI2C1_SOURCE();
-
- /* Get the CK48 clock configuration -----------------------------------------------*/
- PeriphClkInit->Clk48ClockSelection = __HAL_RCC_GET_CLK48_SOURCE();
-
- /* Get the SDIO clock configuration -----------------------------------------------*/
- PeriphClkInit->SdioClockSelection = __HAL_RCC_GET_SDIO_SOURCE();
-
- /* Get the SPDIFRX clock configuration ----------------------------------------------*/
- PeriphClkInit->SpdifClockSelection = __HAL_RCC_GET_SPDIFRX_SOURCE();
-
- /* Get the TIM Prescaler configuration --------------------------------------------*/
- if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET)
- {
- PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
- }
- else
- {
- PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
- }
-}
-
-/**
- * @brief Return the peripheral clock frequency for a given peripheral(SAI..)
- * @note Return 0 if peripheral clock identifier not managed by this API
- * @param PeriphClk: Peripheral clock identifier
- * This parameter can be one of the following values:
- * @arg RCC_PERIPHCLK_SAI1: SAI1 peripheral clock
- * @arg RCC_PERIPHCLK_SAI2: SAI2 peripheral clock
- * @retval Frequency in KHz
- */
-uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk)
-{
- uint32_t tmpreg1 = 0;
- /* This variable used to store the SAI clock frequency (value in Hz) */
- uint32_t frequency = 0;
- /* This variable used to store the VCO Input (value in Hz) */
- uint32_t vcoinput = 0;
- /* This variable used to store the SAI clock source */
- uint32_t saiclocksource = 0;
- if ((PeriphClk == RCC_PERIPHCLK_SAI1) || (PeriphClk == RCC_PERIPHCLK_SAI2))
- {
- saiclocksource = RCC->DCKCFGR;
- saiclocksource &= (RCC_DCKCFGR_SAI1SRC | RCC_DCKCFGR_SAI2SRC);
- switch (saiclocksource)
- {
- case 0: /* PLLSAI is the clock source for SAI*/
- {
- /* Configure the PLLSAI division factor */
- /* PLLSAI_VCO Input = PLL_SOURCE/PLLSAIM */
- if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
- {
- /* In Case the PLL Source is HSI (Internal Clock) */
- vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM));
- }
- else
- {
- /* In Case the PLL Source is HSE (External Clock) */
- vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIM)));
- }
- /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
- /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
- tmpreg1 = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24;
- frequency = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6))/(tmpreg1);
-
- /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
- tmpreg1 = (((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> 8) + 1);
- frequency = frequency/(tmpreg1);
- break;
- }
- case RCC_DCKCFGR_SAI1SRC_0: /* PLLI2S is the clock source for SAI*/
- case RCC_DCKCFGR_SAI2SRC_0: /* PLLI2S is the clock source for SAI*/
- {
- /* Configure the PLLI2S division factor */
- /* PLLI2S_VCO Input = PLL_SOURCE/PLLI2SM */
- if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
- {
- /* In Case the PLL Source is HSI (Internal Clock) */
- vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM));
- }
- else
- {
- /* In Case the PLL Source is HSE (External Clock) */
- vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM)));
- }
-
- /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
- /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
- tmpreg1 = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24;
- frequency = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6))/(tmpreg1);
-
- /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
- tmpreg1 = ((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) + 1);
- frequency = frequency/(tmpreg1);
- break;
- }
- case RCC_DCKCFGR_SAI1SRC_1: /* PLLR is the clock source for SAI*/
- case RCC_DCKCFGR_SAI2SRC_1: /* PLLR is the clock source for SAI*/
- {
- /* Configure the PLLI2S division factor */
- /* PLL_VCO Input = PLL_SOURCE/PLLM */
- if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
- {
- /* In Case the PLL Source is HSI (Internal Clock) */
- vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
- }
- else
- {
- /* In Case the PLL Source is HSE (External Clock) */
- vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
- }
-
- /* PLL_VCO Output = PLL_VCO Input * PLLN */
- /* SAI_CLK_x = PLL_VCO Output/PLLR */
- tmpreg1 = (RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> 28;
- frequency = (vcoinput * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6))/(tmpreg1);
- break;
- }
- case RCC_DCKCFGR_SAI1SRC: /* External clock is the clock source for SAI*/
- {
- frequency = EXTERNAL_CLOCK_VALUE;
- break;
- }
- case RCC_DCKCFGR_SAI2SRC: /* PLLSRC(HSE or HSI) is the clock source for SAI*/
- {
- if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
- {
- /* In Case the PLL Source is HSI (Internal Clock) */
- frequency = (uint32_t)(HSI_VALUE);
- }
- else
- {
- /* In Case the PLL Source is HSE (External Clock) */
- frequency = (uint32_t)(HSE_VALUE);
- }
- break;
- }
- default :
- {
- break;
- }
- }
- }
- return frequency;
-}
-
-#endif /* STM32F446xx */
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
-/**
- * @brief Initializes the RCC extended peripherals clocks according to the specified
- * parameters in the RCC_PeriphCLKInitTypeDef.
- * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
- * contains the configuration information for the Extended Peripherals
- * clocks(I2S, SAI, LTDC RTC and TIM).
- *
- * @note Care must be taken when HAL_RCCEx_PeriphCLKConfig() is used to select
- * the RTC clock source; in this case the Backup domain will be reset in
- * order to modify the RTC Clock source, as consequence RTC registers (including
- * the backup registers) and RCC_BDCR register are set to their reset values.
- *
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
-{
- uint32_t tickstart = 0;
- uint32_t tmpreg1 = 0;
-
- /* Check the parameters */
- assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
-
- /*----------------------- SAI/I2S Configuration (PLLI2S) -------------------------*/
-
- /*----------------------- Common configuration SAI/I2S ---------------------------*/
- /* In Case of SAI or I2S Clock Configuration through PLLI2S, PLLI2SN division
- factor is common parameters for both peripherals */
- if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == RCC_PERIPHCLK_I2S) ||
- (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == RCC_PERIPHCLK_SAI_PLLI2S))
- {
- /* check for Parameters */
- assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
-
- /* Disable the PLLI2S */
- __HAL_RCC_PLLI2S_DISABLE();
- /* Get tick */
- tickstart = HAL_GetTick();
- /* Wait till PLLI2S is disabled */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
- {
- /* return in case of Timeout detected */
- return HAL_TIMEOUT;
- }
- }
-
- /*---------------------------- I2S configuration -------------------------------*/
- /* In Case of I2S Clock Configuration through PLLI2S, PLLI2SR must be added
- only for I2S configuration */
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S))
- {
- /* check for Parameters */
- assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
- /* Configure the PLLI2S division factors */
- /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) × (PLLI2SN/PLLM) */
- /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
- __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR);
- }
-
- /*---------------------------- SAI configuration -------------------------------*/
- /* In Case of SAI Clock Configuration through PLLI2S, PLLI2SQ and PLLI2S_DIVQ must
- be added only for SAI configuration */
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLI2S) == (RCC_PERIPHCLK_SAI_PLLI2S))
- {
- /* Check the PLLI2S division factors */
- assert_param(IS_RCC_PLLI2SQ_VALUE(PeriphClkInit->PLLI2S.PLLI2SQ));
- assert_param(IS_RCC_PLLI2S_DIVQ_VALUE(PeriphClkInit->PLLI2SDivQ));
-
- /* Read PLLI2SR value from PLLI2SCFGR register (this value is not need for SAI configuration) */
- tmpreg1 = ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
- /* Configure the PLLI2S division factors */
- /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */
- /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
- /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
- __HAL_RCC_PLLI2S_SAICLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SQ , tmpreg1);
- /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
- __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLI2SDivQ);
- }
-
- /* Enable the PLLI2S */
- __HAL_RCC_PLLI2S_ENABLE();
- /* Get tick */
- tickstart = HAL_GetTick();
- /* Wait till PLLI2S is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
- {
- /* return in case of Timeout detected */
- return HAL_TIMEOUT;
- }
- }
- }
-
- /*----------------------- SAI/LTDC Configuration (PLLSAI) ------------------*/
-
- /*----------------------- Common configuration SAI/LTDC --------------------*/
- /* In Case of SAI or LTDC Clock Configuration through PLLSAI, PLLSAIN division
- factor is common parameters for both peripherals */
- if((((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == RCC_PERIPHCLK_SAI_PLLSAI) ||
- (((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == RCC_PERIPHCLK_LTDC))
- {
- /* Check the PLLSAI division factors */
- assert_param(IS_RCC_PLLSAIN_VALUE(PeriphClkInit->PLLSAI.PLLSAIN));
-
- /* Disable PLLSAI Clock */
- __HAL_RCC_PLLSAI_DISABLE();
- /* Get tick */
- tickstart = HAL_GetTick();
- /* Wait till PLLSAI is disabled */
- while(__HAL_RCC_PLLSAI_GET_FLAG() != RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
- {
- /* return in case of Timeout detected */
- return HAL_TIMEOUT;
- }
- }
-
- /*---------------------------- SAI configuration -------------------------*/
- /* In Case of SAI Clock Configuration through PLLSAI, PLLSAIQ and PLLSAI_DIVQ must
- be added only for SAI configuration */
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_SAI_PLLSAI) == (RCC_PERIPHCLK_SAI_PLLSAI))
- {
- assert_param(IS_RCC_PLLSAIQ_VALUE(PeriphClkInit->PLLSAI.PLLSAIQ));
- assert_param(IS_RCC_PLLSAI_DIVQ_VALUE(PeriphClkInit->PLLSAIDivQ));
-
- /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */
- tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR));
- /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
- /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
- /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
- __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , PeriphClkInit->PLLSAI.PLLSAIQ, tmpreg1);
- /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
- __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(PeriphClkInit->PLLSAIDivQ);
- }
-
- /*---------------------------- LTDC configuration ------------------------*/
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_LTDC) == (RCC_PERIPHCLK_LTDC))
- {
- assert_param(IS_RCC_PLLSAIR_VALUE(PeriphClkInit->PLLSAI.PLLSAIR));
- assert_param(IS_RCC_PLLSAI_DIVR_VALUE(PeriphClkInit->PLLSAIDivR));
-
- /* Read PLLSAIR value from PLLSAICFGR register (this value is not need for SAI configuration) */
- tmpreg1 = ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
- /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
- /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
- /* LTDC_CLK(first level) = PLLSAI_VCO Output/PLLSAIR */
- __HAL_RCC_PLLSAI_CONFIG(PeriphClkInit->PLLSAI.PLLSAIN , tmpreg1, PeriphClkInit->PLLSAI.PLLSAIR);
- /* LTDC_CLK = LTDC_CLK(first level)/PLLSAIDIVR */
- __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(PeriphClkInit->PLLSAIDivR);
- }
- /* Enable PLLSAI Clock */
- __HAL_RCC_PLLSAI_ENABLE();
- /* Get tick */
- tickstart = HAL_GetTick();
- /* Wait till PLLSAI is ready */
- while(__HAL_RCC_PLLSAI_GET_FLAG() == RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLLSAI_TIMEOUT_VALUE)
- {
- /* return in case of Timeout detected */
- return HAL_TIMEOUT;
- }
- }
- }
-
-
- /*---------------------------- RTC configuration ---------------------------*/
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
- {
- /* Enable Power Clock*/
- __HAL_RCC_PWR_CLK_ENABLE();
-
- /* Enable write access to Backup domain */
- PWR->CR |= PWR_CR_DBP;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((PWR->CR & PWR_CR_DBP) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- /* Reset the Backup domain only if the RTC Clock source selection is modified */
- if((RCC->BDCR & RCC_BDCR_RTCSEL) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))
- {
- /* Store the content of BDCR register before the reset of Backup Domain */
- tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
- /* RTC Clock selection can be changed only if the Backup Domain is reset */
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
- /* Restore the Content of BDCR register */
- RCC->BDCR = tmpreg1;
- /* Wait for LSERDY if LSE was enabled */
- if(HAL_IS_BIT_SET(tmpreg1, RCC_BDCR_LSERDY))
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait till LSE is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
- }
- }
-
- /*---------------------------- TIM configuration ---------------------------*/
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_TIM) == (RCC_PERIPHCLK_TIM))
- {
- __HAL_RCC_TIMCLKPRESCALER(PeriphClkInit->TIMPresSelection);
- }
- return HAL_OK;
-}
-
-/**
- * @brief Configures the RCC_OscInitStruct according to the internal
- * RCC configuration registers.
- * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
- * will be configured.
- * @retval None
- */
-void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
-{
- uint32_t tempreg;
-
- /* Set all possible values for the extended clock type parameter------------*/
- PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_SAI_PLLSAI | RCC_PERIPHCLK_SAI_PLLI2S | RCC_PERIPHCLK_LTDC | RCC_PERIPHCLK_TIM | RCC_PERIPHCLK_RTC;
-
- /* Get the PLLI2S Clock configuration -----------------------------------------------*/
- PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN));
- PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
- PeriphClkInit->PLLI2S.PLLI2SQ = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ));
- /* Get the PLLSAI Clock configuration -----------------------------------------------*/
- PeriphClkInit->PLLSAI.PLLSAIN = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN));
- PeriphClkInit->PLLSAI.PLLSAIR = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIR) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR));
- PeriphClkInit->PLLSAI.PLLSAIQ = (uint32_t)((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ));
- /* Get the PLLSAI/PLLI2S division factors -----------------------------------------------*/
- PeriphClkInit->PLLI2SDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLI2SDIVQ));
- PeriphClkInit->PLLSAIDivQ = (uint32_t)((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> POSITION_VAL(RCC_DCKCFGR_PLLSAIDIVQ));
- PeriphClkInit->PLLSAIDivR = (uint32_t)(RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVR);
- /* Get the RTC Clock configuration -----------------------------------------------*/
- tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
- PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
-
- if ((RCC->DCKCFGR & RCC_DCKCFGR_TIMPRE) == RESET)
- {
- PeriphClkInit->TIMPresSelection = RCC_TIMPRES_DESACTIVATED;
- }
- else
- {
- PeriphClkInit->TIMPresSelection = RCC_TIMPRES_ACTIVATED;
- }
-}
-
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\
- defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE)
-/**
- * @brief Initializes the RCC extended peripherals clocks according to the specified parameters in the
- * RCC_PeriphCLKInitTypeDef.
- * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
- * contains the configuration information for the Extended Peripherals clocks(I2S and RTC clocks).
- *
- * @note A caution to be taken when HAL_RCCEx_PeriphCLKConfig() is used to select RTC clock selection, in this case
- * the Reset of Backup domain will be applied in order to modify the RTC Clock source as consequence all backup
- * domain (RTC and RCC_BDCR register expect BKPSRAM) will be reset
- *
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
-{
- uint32_t tickstart = 0;
- uint32_t tmpreg1 = 0;
-
- /* Check the parameters */
- assert_param(IS_RCC_PERIPHCLOCK(PeriphClkInit->PeriphClockSelection));
-
- /*---------------------------- I2S configuration ---------------------------*/
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_I2S) == (RCC_PERIPHCLK_I2S))
- {
- /* check for Parameters */
- assert_param(IS_RCC_PLLI2SR_VALUE(PeriphClkInit->PLLI2S.PLLI2SR));
- assert_param(IS_RCC_PLLI2SN_VALUE(PeriphClkInit->PLLI2S.PLLI2SN));
-#if defined(STM32F411xE)
- assert_param(IS_RCC_PLLI2SM_VALUE(PeriphClkInit->PLLI2S.PLLI2SM));
-#endif /* STM32F411xE */
- /* Disable the PLLI2S */
- __HAL_RCC_PLLI2S_DISABLE();
- /* Get tick */
- tickstart = HAL_GetTick();
- /* Wait till PLLI2S is disabled */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
- {
- /* return in case of Timeout detected */
- return HAL_TIMEOUT;
- }
- }
-
-#if defined(STM32F411xE)
- /* Configure the PLLI2S division factors */
- /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) × (PLLI2SN/PLLI2SM) */
- /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
- __HAL_RCC_PLLI2S_I2SCLK_CONFIG(PeriphClkInit->PLLI2S.PLLI2SM, PeriphClkInit->PLLI2S.PLLI2SN, PeriphClkInit->PLLI2S.PLLI2SR);
-#else
- /* Configure the PLLI2S division factors */
- /* PLLI2S_VCO = f(VCO clock) = f(PLLI2S clock input) × (PLLI2SN/PLLM) */
- /* I2SCLK = f(PLLI2S clock output) = f(VCO clock) / PLLI2SR */
- __HAL_RCC_PLLI2S_CONFIG(PeriphClkInit->PLLI2S.PLLI2SN , PeriphClkInit->PLLI2S.PLLI2SR);
-#endif /* STM32F411xE */
-
- /* Enable the PLLI2S */
- __HAL_RCC_PLLI2S_ENABLE();
- /* Get tick */
- tickstart = HAL_GetTick();
- /* Wait till PLLI2S is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLI2SRDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLLI2S_TIMEOUT_VALUE)
- {
- /* return in case of Timeout detected */
- return HAL_TIMEOUT;
- }
- }
- }
-
- /*---------------------------- RTC configuration ---------------------------*/
- if(((PeriphClkInit->PeriphClockSelection) & RCC_PERIPHCLK_RTC) == (RCC_PERIPHCLK_RTC))
- {
- /* Enable Power Clock*/
- __HAL_RCC_PWR_CLK_ENABLE();
-
- /* Enable write access to Backup domain */
- PWR->CR |= PWR_CR_DBP;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while((PWR->CR & PWR_CR_DBP) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- /* Reset the Backup domain only if the RTC Clock source selection is modified */
- if((RCC->BDCR & RCC_BDCR_RTCSEL) != (PeriphClkInit->RTCClockSelection & RCC_BDCR_RTCSEL))
- {
- /* Store the content of BDCR register before the reset of Backup Domain */
- tmpreg1 = (RCC->BDCR & ~(RCC_BDCR_RTCSEL));
- /* RTC Clock selection can be changed only if the Backup Domain is reset */
- __HAL_RCC_BACKUPRESET_FORCE();
- __HAL_RCC_BACKUPRESET_RELEASE();
- /* Restore the Content of BDCR register */
- RCC->BDCR = tmpreg1;
- /* Wait for LSERDY if LSE was enabled */
- if(HAL_IS_BIT_SET(tmpreg1, RCC_BDCR_LSERDY))
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait till LSE is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- __HAL_RCC_RTC_CONFIG(PeriphClkInit->RTCClockSelection);
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Configures the RCC_OscInitStruct according to the internal
- * RCC configuration registers.
- * @param PeriphClkInit: pointer to an RCC_PeriphCLKInitTypeDef structure that
- * will be configured.
- * @retval None
- */
-void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit)
-{
- uint32_t tempreg;
-
- /* Set all possible values for the extended clock type parameter------------*/
- PeriphClkInit->PeriphClockSelection = RCC_PERIPHCLK_I2S | RCC_PERIPHCLK_RTC;
-
- /* Get the PLLI2S Clock configuration -----------------------------------------------*/
- PeriphClkInit->PLLI2S.PLLI2SN = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN));
- PeriphClkInit->PLLI2S.PLLI2SR = (uint32_t)((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SR) >> POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR));
-#if defined(STM32F411xE)
- PeriphClkInit->PLLI2S.PLLI2SM = (uint32_t)(RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SM);
-#endif /* STM32F411xE */
- /* Get the RTC Clock configuration -----------------------------------------------*/
- tempreg = (RCC->CFGR & RCC_CFGR_RTCPRE);
- PeriphClkInit->RTCClockSelection = (uint32_t)((tempreg) | (RCC->BDCR & RCC_BDCR_RTCSEL));
-
-}
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */
-
-#if defined(STM32F411xE) || defined(STM32F446xx)
-/**
- * @brief Select LSE mode
- *
- * @note This mode is only available for STM32F411xx devices.
- *
- * @param Mode: specifies the LSE mode.
- * This parameter can be one of the following values:
- * @arg RCC_LSE_LOWPOWER_MODE: LSE oscillator in low power mode selection
- * @arg RCC_LSE_HIGHDRIVE_MODE: LSE oscillator in High Drive mode selection
- * @retval None
- */
-void HAL_RCCEx_SelectLSEMode(uint8_t Mode)
-{
- /* Check the parameters */
- assert_param(IS_RCC_LSE_MODE(Mode));
- if(Mode == RCC_LSE_HIGHDRIVE_MODE)
- {
- SET_BIT(RCC->BDCR, RCC_BDCR_LSEMOD);
- }
- else
- {
- CLEAR_BIT(RCC->BDCR, RCC_BDCR_LSEMOD);
- }
-}
-
-#endif /* STM32F411xE || STM32F446xx */
-
-#if defined(STM32F446xx)
-/**
- * @brief Initializes the RCC Oscillators according to the specified parameters in the
- * RCC_OscInitTypeDef.
- * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that
- * contains the configuration information for the RCC Oscillators.
- * @note The PLL is not disabled when used as system clock.
- * @note This function add the PLL/PLLR factor management during PLL configuration this feature is only available in STM32F446xx devices
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
-{
- uint32_t tickstart = 0;
-
- /* Check the parameters */
- assert_param(IS_RCC_OSCILLATORTYPE(RCC_OscInitStruct->OscillatorType));
- /*------------------------------- HSE Configuration ------------------------*/
- if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSE) == RCC_OSCILLATORTYPE_HSE)
- {
- /* Check the parameters */
- assert_param(IS_RCC_HSE(RCC_OscInitStruct->HSEState));
- /* When the HSE is used as system clock or clock source for PLL in these cases HSE will not disabled */
- if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSE) ||\
- ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)) ||\
- ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLLR) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSE)))
- {
- if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET) && (RCC_OscInitStruct->HSEState == RCC_HSE_OFF))
- {
- return HAL_ERROR;
- }
- }
- else
- {
- /* Reset HSEON and HSEBYP bits before configuring the HSE --------------*/
- __HAL_RCC_HSE_CONFIG(RCC_HSE_OFF);
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till HSE is disabled */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Set the new HSE configuration ---------------------------------------*/
- __HAL_RCC_HSE_CONFIG(RCC_OscInitStruct->HSEState);
-
- /* Check the HSE State */
- if((RCC_OscInitStruct->HSEState) != RCC_HSE_OFF)
- {
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till HSE is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else
- {
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till HSE is bypassed or disabled */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSERDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > HSE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- }
- }
- /*----------------------------- HSI Configuration --------------------------*/
- if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_HSI) == RCC_OSCILLATORTYPE_HSI)
- {
- /* Check the parameters */
- assert_param(IS_RCC_HSI(RCC_OscInitStruct->HSIState));
- assert_param(IS_RCC_CALIBRATION_VALUE(RCC_OscInitStruct->HSICalibrationValue));
-
- /* Check if HSI is used as system clock or as PLL source when PLL is selected as system clock */
- if((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_HSI) ||\
- ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLL) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)) ||\
- ((__HAL_RCC_GET_SYSCLK_SOURCE() == RCC_CFGR_SWS_PLLR) && ((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLCFGR_PLLSRC_HSI)))
- {
- /* When HSI is used as system clock it will not disabled */
- if((__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET) && (RCC_OscInitStruct->HSIState != RCC_HSI_ON))
- {
- return HAL_ERROR;
- }
- /* Otherwise, just the calibration is allowed */
- else
- {
- /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
- __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
- }
- }
- else
- {
- /* Check the HSI State */
- if((RCC_OscInitStruct->HSIState)!= RCC_HSI_OFF)
- {
- /* Enable the Internal High Speed oscillator (HSI). */
- __HAL_RCC_HSI_ENABLE();
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till HSI is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Adjusts the Internal High Speed oscillator (HSI) calibration value.*/
- __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(RCC_OscInitStruct->HSICalibrationValue);
- }
- else
- {
- /* Disable the Internal High Speed oscillator (HSI). */
- __HAL_RCC_HSI_DISABLE();
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till HSI is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_HSIRDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > HSI_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- }
- }
- /*------------------------------ LSI Configuration -------------------------*/
- if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSI) == RCC_OSCILLATORTYPE_LSI)
- {
- /* Check the parameters */
- assert_param(IS_RCC_LSI(RCC_OscInitStruct->LSIState));
-
- /* Check the LSI State */
- if((RCC_OscInitStruct->LSIState)!= RCC_LSI_OFF)
- {
- /* Enable the Internal Low Speed oscillator (LSI). */
- __HAL_RCC_LSI_ENABLE();
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till LSI is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else
- {
- /* Disable the Internal Low Speed oscillator (LSI). */
- __HAL_RCC_LSI_DISABLE();
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till LSI is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSIRDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > LSI_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- }
- /*------------------------------ LSE Configuration -------------------------*/
- if(((RCC_OscInitStruct->OscillatorType) & RCC_OSCILLATORTYPE_LSE) == RCC_OSCILLATORTYPE_LSE)
- {
- /* Check the parameters */
- assert_param(IS_RCC_LSE(RCC_OscInitStruct->LSEState));
-
- /* Enable Power Clock*/
- __HAL_RCC_PWR_CLK_ENABLE();
-
- /* Enable write access to Backup domain */
- PWR->CR |= PWR_CR_DBP;
-
- /* Wait for Backup domain Write protection disable */
- tickstart = HAL_GetTick();
-
- while((PWR->CR & PWR_CR_DBP) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > RCC_DBP_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Reset LSEON and LSEBYP bits before configuring the LSE ----------------*/
- __HAL_RCC_LSE_CONFIG(RCC_LSE_OFF);
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till LSE is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Set the new LSE configuration -----------------------------------------*/
- __HAL_RCC_LSE_CONFIG(RCC_OscInitStruct->LSEState);
- /* Check the LSE State */
- if((RCC_OscInitStruct->LSEState) != RCC_LSE_OFF)
- {
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till LSE is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else
- {
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till LSE is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_LSERDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > RCC_LSE_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- }
- /*-------------------------------- PLL Configuration -----------------------*/
- /* Check the parameters */
- assert_param(IS_RCC_PLL(RCC_OscInitStruct->PLL.PLLState));
- if ((RCC_OscInitStruct->PLL.PLLState) != RCC_PLL_NONE)
- {
- /* Check if the PLL is used as system clock or not */
- if(__HAL_RCC_GET_SYSCLK_SOURCE() != RCC_CFGR_SWS_PLL)
- {
- if((RCC_OscInitStruct->PLL.PLLState) == RCC_PLL_ON)
- {
- /* Check the parameters */
- assert_param(IS_RCC_PLLSOURCE(RCC_OscInitStruct->PLL.PLLSource));
- assert_param(IS_RCC_PLLM_VALUE(RCC_OscInitStruct->PLL.PLLM));
- assert_param(IS_RCC_PLLN_VALUE(RCC_OscInitStruct->PLL.PLLN));
- assert_param(IS_RCC_PLLP_VALUE(RCC_OscInitStruct->PLL.PLLP));
- assert_param(IS_RCC_PLLQ_VALUE(RCC_OscInitStruct->PLL.PLLQ));
- assert_param(IS_RCC_PLLR_VALUE(RCC_OscInitStruct->PLL.PLLR));
-
- /* Disable the main PLL. */
- __HAL_RCC_PLL_DISABLE();
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till PLL is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- /* Configure the main PLL clock source, multiplication and division factors. */
- __HAL_RCC_PLL_CONFIG(RCC_OscInitStruct->PLL.PLLSource,
- RCC_OscInitStruct->PLL.PLLM,
- RCC_OscInitStruct->PLL.PLLN,
- RCC_OscInitStruct->PLL.PLLP,
- RCC_OscInitStruct->PLL.PLLQ,
- RCC_OscInitStruct->PLL.PLLR);
-
- /* Enable the main PLL. */
- __HAL_RCC_PLL_ENABLE();
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till PLL is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- else
- {
- /* Disable the main PLL. */
- __HAL_RCC_PLL_DISABLE();
-
- /* Get Start Tick*/
- tickstart = HAL_GetTick();
-
- /* Wait till PLL is ready */
- while(__HAL_RCC_GET_FLAG(RCC_FLAG_PLLRDY) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > PLL_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
- }
- else
- {
- return HAL_ERROR;
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief Configures the RCC_OscInitStruct according to the internal
- * RCC configuration registers.
- * @param RCC_OscInitStruct: pointer to an RCC_OscInitTypeDef structure that will be configured.
- *
- * @note This function is only available in case of STM32F446xx devices.
- * @note This function add the PLL/PLLR factor management
- * @retval None
- */
-void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct)
-{
- /* Set all possible values for the Oscillator type parameter ---------------*/
- RCC_OscInitStruct->OscillatorType = RCC_OSCILLATORTYPE_HSE | RCC_OSCILLATORTYPE_HSI | RCC_OSCILLATORTYPE_LSE | RCC_OSCILLATORTYPE_LSI;
-
- /* Get the HSE configuration -----------------------------------------------*/
- if((RCC->CR &RCC_CR_HSEBYP) == RCC_CR_HSEBYP)
- {
- RCC_OscInitStruct->HSEState = RCC_HSE_BYPASS;
- }
- else if((RCC->CR &RCC_CR_HSEON) == RCC_CR_HSEON)
- {
- RCC_OscInitStruct->HSEState = RCC_HSE_ON;
- }
- else
- {
- RCC_OscInitStruct->HSEState = RCC_HSE_OFF;
- }
-
- /* Get the HSI configuration -----------------------------------------------*/
- if((RCC->CR &RCC_CR_HSION) == RCC_CR_HSION)
- {
- RCC_OscInitStruct->HSIState = RCC_HSI_ON;
- }
- else
- {
- RCC_OscInitStruct->HSIState = RCC_HSI_OFF;
- }
-
- RCC_OscInitStruct->HSICalibrationValue = (uint32_t)((RCC->CR &RCC_CR_HSITRIM) >> POSITION_VAL(RCC_CR_HSITRIM));
-
- /* Get the LSE configuration -----------------------------------------------*/
- if((RCC->BDCR &RCC_BDCR_LSEBYP) == RCC_BDCR_LSEBYP)
- {
- RCC_OscInitStruct->LSEState = RCC_LSE_BYPASS;
- }
- else if((RCC->BDCR &RCC_BDCR_LSEON) == RCC_BDCR_LSEON)
- {
- RCC_OscInitStruct->LSEState = RCC_LSE_ON;
- }
- else
- {
- RCC_OscInitStruct->LSEState = RCC_LSE_OFF;
- }
-
- /* Get the LSI configuration -----------------------------------------------*/
- if((RCC->CSR &RCC_CSR_LSION) == RCC_CSR_LSION)
- {
- RCC_OscInitStruct->LSIState = RCC_LSI_ON;
- }
- else
- {
- RCC_OscInitStruct->LSIState = RCC_LSI_OFF;
- }
-
- /* Get the PLL configuration -----------------------------------------------*/
- if((RCC->CR &RCC_CR_PLLON) == RCC_CR_PLLON)
- {
- RCC_OscInitStruct->PLL.PLLState = RCC_PLL_ON;
- }
- else
- {
- RCC_OscInitStruct->PLL.PLLState = RCC_PLL_OFF;
- }
- RCC_OscInitStruct->PLL.PLLSource = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC);
- RCC_OscInitStruct->PLL.PLLM = (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM);
- RCC_OscInitStruct->PLL.PLLN = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN));
- RCC_OscInitStruct->PLL.PLLP = (uint32_t)((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) + RCC_PLLCFGR_PLLP_0) << 1) >> POSITION_VAL(RCC_PLLCFGR_PLLP));
- RCC_OscInitStruct->PLL.PLLQ = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLQ) >> POSITION_VAL(RCC_PLLCFGR_PLLQ));
- RCC_OscInitStruct->PLL.PLLR = (uint32_t)((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> POSITION_VAL(RCC_PLLCFGR_PLLR));
-}
-
-/**
- * @brief Returns the SYSCLK frequency
- *
- * @note This function is only available in case of STM32F446xx devices.
- * @note This function add the PLL/PLLR System clock source
- *
- * @note The system frequency computed by this function is not the real
- * frequency in the chip. It is calculated based on the predefined
- * constant and the selected clock source:
- * @note If SYSCLK source is HSI, function returns values based on HSI_VALUE(*)
- * @note If SYSCLK source is HSE, function returns values based on HSE_VALUE(**)
- * @note If SYSCLK source is PLL, function returns values based on HSE_VALUE(**)
- * or HSI_VALUE(*) multiplied/divided by the PLL factors.
- * @note (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
- * 16 MHz) but the real value may vary depending on the variations
- * in voltage and temperature.
- * @note (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
- * 25 MHz), user has to ensure that HSE_VALUE is same as the real
- * frequency of the crystal used. Otherwise, this function may
- * have wrong result.
- *
- * @note The result of this function could be not correct when using fractional
- * value for HSE crystal.
- *
- * @note This function can be used by the user application to compute the
- * baudrate for the communication peripherals or configure other parameters.
- *
- * @note Each time SYSCLK changes, this function must be called to update the
- * right SYSCLK value. Otherwise, any configuration based on this function will be incorrect.
- *
- *
- * @retval SYSCLK frequency
- */
-uint32_t HAL_RCC_GetSysClockFreq(void)
-{
- uint32_t pllm = 0;
- uint32_t pllvco = 0;
- uint32_t pllp = 0;
- uint32_t pllr = 0;
- uint32_t sysclockfreq = 0;
-
- /* Get SYSCLK source -------------------------------------------------------*/
- switch (RCC->CFGR & RCC_CFGR_SWS)
- {
- case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */
- {
- sysclockfreq = HSI_VALUE;
- break;
- }
- case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */
- {
- sysclockfreq = HSE_VALUE;
- break;
- }
- case RCC_CFGR_SWS_PLL: /* PLL/PLLP used as system clock source */
- {
- /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
- SYSCLK = PLL_VCO / PLLP */
- pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
- if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI)
- {
- /* HSE used as PLL clock source */
- pllvco = ((HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
- }
- else
- {
- /* HSI used as PLL clock source */
- pllvco = ((HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
- }
- pllp = ((((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >> POSITION_VAL(RCC_PLLCFGR_PLLP)) + 1 ) *2);
-
- sysclockfreq = pllvco/pllp;
- break;
- }
- case RCC_CFGR_SWS_PLLR: /* PLL/PLLR used as system clock source */
- {
- /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLLM) * PLLN
- SYSCLK = PLL_VCO / PLLR */
- pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
- if(__HAL_RCC_GET_PLL_OSCSOURCE() != RCC_PLLSOURCE_HSI)
- {
- /* HSE used as PLL clock source */
- pllvco = ((HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
- }
- else
- {
- /* HSI used as PLL clock source */
- pllvco = ((HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> POSITION_VAL(RCC_PLLCFGR_PLLN)));
- }
- pllr = ((RCC->PLLCFGR & RCC_PLLCFGR_PLLR) >> POSITION_VAL(RCC_PLLCFGR_PLLR));
-
- sysclockfreq = pllvco/pllr;
- break;
- }
- default:
- {
- sysclockfreq = HSI_VALUE;
- break;
- }
- }
- return sysclockfreq;
-}
-#endif /* STM32F446xx */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_RCC_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c
deleted file mode 100644
index a9873b6..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rng.c
+++ /dev/null
@@ -1,515 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_rng.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief RNG HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Random Number Generator (RNG) peripheral:
- * + Initialization/de-initialization functions
- * + Peripheral Control functions
- * + Peripheral State functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- The RNG HAL driver can be used as follows:
-
- (#) Enable the RNG controller clock using __HAL_RCC_RNG_CLK_ENABLE() macro
- in HAL_RNG_MspInit().
- (#) Activate the RNG peripheral using HAL_RNG_Init() function.
- (#) Wait until the 32 bit Random Number Generator contains a valid
- random data using (polling/interrupt) mode.
- (#) Get the 32 bit random number using HAL_RNG_GenerateRandomNumber() function.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup RNG
- * @{
- */
-
-#ifdef HAL_RNG_MODULE_ENABLED
-
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
- defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
-
-
-/* Private types -------------------------------------------------------------*/
-/* Private defines -----------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private constants ---------------------------------------------------------*/
-/** @addtogroup RNG_Private_Constants
- * @{
- */
-#define RNG_TIMEOUT_VALUE 2
-/**
- * @}
- */
-/* Private macros ------------------------------------------------------------*/
-/* Private functions prototypes ----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-
-/** @addtogroup RNG_Exported_Functions
- * @{
- */
-
-/** @addtogroup RNG_Exported_Functions_Group1
- * @brief Initialization and de-initialization functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Initialize the RNG according to the specified parameters
- in the RNG_InitTypeDef and create the associated handle
- (+) DeInitialize the RNG peripheral
- (+) Initialize the RNG MSP
- (+) DeInitialize RNG MSP
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the RNG peripheral and creates the associated handle.
- * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
- * the configuration information for RNG.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng)
-{
- /* Check the RNG handle allocation */
- if(hrng == NULL)
- {
- return HAL_ERROR;
- }
-
- __HAL_LOCK(hrng);
-
- if(hrng->State == HAL_RNG_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hrng->Lock = HAL_UNLOCKED;
- /* Init the low level hardware */
- HAL_RNG_MspInit(hrng);
- }
-
- /* Change RNG peripheral state */
- hrng->State = HAL_RNG_STATE_BUSY;
-
- /* Enable the RNG Peripheral */
- __HAL_RNG_ENABLE(hrng);
-
- /* Initialize the RNG state */
- hrng->State = HAL_RNG_STATE_READY;
-
- __HAL_UNLOCK(hrng);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the RNG peripheral.
- * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
- * the configuration information for RNG.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RNG_DeInit(RNG_HandleTypeDef *hrng)
-{
- /* Check the RNG handle allocation */
- if(hrng == NULL)
- {
- return HAL_ERROR;
- }
- /* Disable the RNG Peripheral */
- CLEAR_BIT(hrng->Instance->CR, RNG_CR_IE | RNG_CR_RNGEN);
-
- /* Clear RNG interrupt status flags */
- CLEAR_BIT(hrng->Instance->SR, RNG_SR_CEIS | RNG_SR_SEIS);
-
- /* DeInit the low level hardware */
- HAL_RNG_MspDeInit(hrng);
-
- /* Update the RNG state */
- hrng->State = HAL_RNG_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hrng);
-
- /* Return the function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the RNG MSP.
- * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
- * the configuration information for RNG.
- * @retval None
- */
-__weak void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng)
-{
- /* NOTE : This function should not be modified. When the callback is needed,
- function HAL_RNG_MspInit must be implemented in the user file.
- */
-}
-
-/**
- * @brief DeInitializes the RNG MSP.
- * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
- * the configuration information for RNG.
- * @retval None
- */
-__weak void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng)
-{
- /* NOTE : This function should not be modified. When the callback is needed,
- function HAL_RNG_MspDeInit must be implemented in the user file.
- */
-}
-
-/**
- * @}
- */
-
-/** @addtogroup RNG_Exported_Functions_Group2
- * @brief Peripheral Control functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Control functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) Get the 32 bit Random number
- (+) Get the 32 bit Random number with interrupt enabled
- (+) Handle RNG interrupt request
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Generates a 32-bit random number.
- * @note Each time the random number data is read the RNG_FLAG_DRDY flag
- * is automatically cleared.
- * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
- * the configuration information for RNG.
- * @param random32bit: pointer to generated random number variable if successful.
- * @retval HAL status
- */
-
-HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit)
-{
- uint32_t tickstart = 0;
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Process Locked */
- __HAL_LOCK(hrng);
-
- /* Check RNG peripheral state */
- if(hrng->State == HAL_RNG_STATE_READY)
- {
- /* Change RNG peripheral state */
- hrng->State = HAL_RNG_STATE_BUSY;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Check if data register contains valid random data */
- while(__HAL_RNG_GET_FLAG(hrng, RNG_FLAG_DRDY) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > RNG_TIMEOUT_VALUE)
- {
- hrng->State = HAL_RNG_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrng);
-
- return HAL_TIMEOUT;
- }
- }
-
- /* Get a 32bit Random number */
- hrng->RandomNumber = hrng->Instance->DR;
- *random32bit = hrng->RandomNumber;
-
- hrng->State = HAL_RNG_STATE_READY;
- }
- else
- {
- status = HAL_ERROR;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrng);
-
- return status;
-}
-
-/**
- * @brief Generates a 32-bit random number in interrupt mode.
- * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
- * the configuration information for RNG.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Process Locked */
- __HAL_LOCK(hrng);
-
- /* Check RNG peripheral state */
- if(hrng->State == HAL_RNG_STATE_READY)
- {
- /* Change RNG peripheral state */
- hrng->State = HAL_RNG_STATE_BUSY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrng);
-
- /* Enable the RNG Interrupts: Data Ready, Clock error, Seed error */
- __HAL_RNG_ENABLE_IT(hrng);
- }
- else
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hrng);
-
- status = HAL_ERROR;
- }
-
- return status;
-}
-
-/**
- * @brief Handles RNG interrupt request.
- * @note In the case of a clock error, the RNG is no more able to generate
- * random numbers because the PLL48CLK clock is not correct. User has
- * to check that the clock controller is correctly configured to provide
- * the RNG clock and clear the CEIS bit using __HAL_RNG_CLEAR_IT().
- * The clock error has no impact on the previously generated
- * random numbers, and the RNG_DR register contents can be used.
- * @note In the case of a seed error, the generation of random numbers is
- * interrupted as long as the SECS bit is '1'. If a number is
- * available in the RNG_DR register, it must not be used because it may
- * not have enough entropy. In this case, it is recommended to clear the
- * SEIS bit using __HAL_RNG_CLEAR_IT(), then disable and enable
- * the RNG peripheral to reinitialize and restart the RNG.
- * @note User-written HAL_RNG_ErrorCallback() API is called once whether SEIS
- * or CEIS are set.
- * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
- * the configuration information for RNG.
- * @retval None
-
- */
-void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng)
-{
- /* RNG clock error interrupt occurred */
- if((__HAL_RNG_GET_IT(hrng, RNG_IT_CEI) != RESET) || (__HAL_RNG_GET_IT(hrng, RNG_IT_SEI) != RESET))
- {
- /* Change RNG peripheral state */
- hrng->State = HAL_RNG_STATE_ERROR;
-
- HAL_RNG_ErrorCallback(hrng);
-
- /* Clear the clock error flag */
- __HAL_RNG_CLEAR_IT(hrng, RNG_IT_CEI|RNG_IT_SEI);
-
- }
-
- /* Check RNG data ready interrupt occurred */
- if(__HAL_RNG_GET_IT(hrng, RNG_IT_DRDY) != RESET)
- {
- /* Generate random number once, so disable the IT */
- __HAL_RNG_DISABLE_IT(hrng);
-
- /* Get the 32bit Random number (DRDY flag automatically cleared) */
- hrng->RandomNumber = hrng->Instance->DR;
-
- if(hrng->State != HAL_RNG_STATE_ERROR)
- {
- /* Change RNG peripheral state */
- hrng->State = HAL_RNG_STATE_READY;
-
- /* Data Ready callback */
- HAL_RNG_ReadyDataCallback(hrng, hrng->RandomNumber);
- }
- }
-}
-
-/**
- * @brief Returns generated random number in polling mode (Obsolete)
- * Use HAL_RNG_GenerateRandomNumber() API instead.
- * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
- * the configuration information for RNG.
- * @retval Random value
- */
-uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng)
-{
- if(HAL_RNG_GenerateRandomNumber(hrng, &(hrng->RandomNumber)) == HAL_OK)
- {
- return hrng->RandomNumber;
- }
- else
- {
- return 0;
- }
-}
-
-/**
- * @brief Returns a 32-bit random number with interrupt enabled (Obsolete),
- * Use HAL_RNG_GenerateRandomNumber_IT() API instead.
- * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
- * the configuration information for RNG.
- * @retval 32-bit random number
- */
-uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng)
-{
- uint32_t random32bit = 0;
-
- /* Process locked */
- __HAL_LOCK(hrng);
-
- /* Change RNG peripheral state */
- hrng->State = HAL_RNG_STATE_BUSY;
-
- /* Get a 32bit Random number */
- random32bit = hrng->Instance->DR;
-
- /* Enable the RNG Interrupts: Data Ready, Clock error, Seed error */
- __HAL_RNG_ENABLE_IT(hrng);
-
- /* Return the 32 bit random number */
- return random32bit;
-}
-
-/**
- * @brief Read latest generated random number.
- * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
- * the configuration information for RNG.
- * @retval random value
- */
-uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng)
-{
- return(hrng->RandomNumber);
-}
-
-/**
- * @brief Data Ready callback in non-blocking mode.
- * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
- * the configuration information for RNG.
- * @param random32bit: generated random number.
- * @retval None
- */
-__weak void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef *hrng, uint32_t random32bit)
-{
- /* NOTE : This function should not be modified. When the callback is needed,
- function HAL_RNG_ReadyDataCallback must be implemented in the user file.
- */
-}
-
-/**
- * @brief RNG error callbacks.
- * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
- * the configuration information for RNG.
- * @retval None
- */
-__weak void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng)
-{
- /* NOTE : This function should not be modified. When the callback is needed,
- function HAL_RNG_ErrorCallback must be implemented in the user file.
- */
-}
-/**
- * @}
- */
-
-
-/** @addtogroup RNG_Exported_Functions_Group3
- * @brief Peripheral State functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral State functions #####
- ===============================================================================
- [..]
- This subsection permits to get in run-time the status of the peripheral
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Returns the RNG state.
- * @param hrng: pointer to a RNG_HandleTypeDef structure that contains
- * the configuration information for RNG.
- * @retval HAL state
- */
-HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng)
-{
- return hrng->State;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-
-#endif /* HAL_RNG_MODULE_ENABLED */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc.c
deleted file mode 100644
index 4114d87..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc.c
+++ /dev/null
@@ -1,1545 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_rtc.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief RTC HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Real Time Clock (RTC) peripheral:
- * + Initialization and de-initialization functions
- * + RTC Time and Date functions
- * + RTC Alarm functions
- * + Peripheral Control functions
- * + Peripheral State functions
- *
- @verbatim
- ==============================================================================
- ##### Backup Domain Operating Condition #####
- ==============================================================================
- [..] The real-time clock (RTC), the RTC backup registers, and the backup
- SRAM (BKP SRAM) can be powered from the VBAT voltage when the main
- VDD supply is powered off.
- To retain the content of the RTC backup registers, backup SRAM, and supply
- the RTC when VDD is turned off, VBAT pin can be connected to an optional
- standby voltage supplied by a battery or by another source.
-
- [..] To allow the RTC operating even when the main digital supply (VDD) is turned
- off, the VBAT pin powers the following blocks:
- (#) The RTC
- (#) The LSE oscillator
- (#) The backup SRAM when the low power backup regulator is enabled
- (#) PC13 to PC15 I/Os, plus PI8 I/O (when available)
-
- [..] When the backup domain is supplied by VDD (analog switch connected to VDD),
- the following pins are available:
- (#) PC14 and PC15 can be used as either GPIO or LSE pins
- (#) PC13 can be used as a GPIO or as the RTC_AF1 pin
- (#) PI8 can be used as a GPIO or as the RTC_AF2 pin
-
- [..] When the backup domain is supplied by VBAT (analog switch connected to VBAT
- because VDD is not present), the following pins are available:
- (#) PC14 and PC15 can be used as LSE pins only
- (#) PC13 can be used as the RTC_AF1 pin
- (#) PI8 can be used as the RTC_AF2 pin
-
- ##### Backup Domain Reset #####
- ==================================================================
- [..] The backup domain reset sets all RTC registers and the RCC_BDCR register
- to their reset values. The BKPSRAM is not affected by this reset. The only
- way to reset the BKPSRAM is through the Flash interface by requesting
- a protection level change from 1 to 0.
- [..] A backup domain reset is generated when one of the following events occurs:
- (#) Software reset, triggered by setting the BDRST bit in the
- RCC Backup domain control register (RCC_BDCR).
- (#) VDD or VBAT power on, if both supplies have previously been powered off.
-
- ##### Backup Domain Access #####
- ==================================================================
- [..] After reset, the backup domain (RTC registers, RTC backup data
- registers and backup SRAM) is protected against possible unwanted write
- accesses.
- [..] To enable access to the RTC Domain and RTC registers, proceed as follows:
- (+) Enable the Power Controller (PWR) APB1 interface clock using the
- __HAL_RCC_PWR_CLK_ENABLE() function.
- (+) Enable access to RTC domain using the HAL_PWR_EnableBkUpAccess() function.
- (+) Select the RTC clock source using the __HAL_RCC_RTC_CONFIG() function.
- (+) Enable RTC Clock using the __HAL_RCC_RTC_ENABLE() function.
-
-
- ##### How to use this driver #####
- ==================================================================
- [..]
- (+) Enable the RTC domain access (see description in the section above).
- (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour
- format using the HAL_RTC_Init() function.
-
- *** Time and Date configuration ***
- ===================================
- [..]
- (+) To configure the RTC Calendar (Time and Date) use the HAL_RTC_SetTime()
- and HAL_RTC_SetDate() functions.
- (+) To read the RTC Calendar, use the HAL_RTC_GetTime() and HAL_RTC_GetDate() functions.
-
- *** Alarm configuration ***
- ===========================
- [..]
- (+) To configure the RTC Alarm use the HAL_RTC_SetAlarm() function.
- You can also configure the RTC Alarm with interrupt mode using the HAL_RTC_SetAlarm_IT() function.
- (+) To read the RTC Alarm, use the HAL_RTC_GetAlarm() function.
-
- ##### RTC and low power modes #####
- ==================================================================
- [..] The MCU can be woken up from a low power mode by an RTC alternate
- function.
- [..] The RTC alternate functions are the RTC alarms (Alarm A and Alarm B),
- RTC wake-up, RTC tamper event detection and RTC time stamp event detection.
- These RTC alternate functions can wake up the system from the Stop and
- Standby low power modes.
- [..] The system can also wake up from low power modes without depending
- on an external interrupt (Auto-wake-up mode), by using the RTC alarm
- or the RTC wake-up events.
- [..] The RTC provides a programmable time base for waking up from the
- Stop or Standby mode at regular intervals.
- Wake-up from STOP and STANDBY modes is possible only when the RTC clock source
- is LSE or LSI.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup RTC RTC
- * @brief RTC HAL module driver
- * @{
- */
-
-#ifdef HAL_RTC_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup RTC_Exported_Functions RTC Exported Functions
- * @{
- */
-
-/** @defgroup RTC_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..] This section provides functions allowing to initialize and configure the
- RTC Prescaler (Synchronous and Asynchronous), RTC Hour format, disable
- RTC registers Write protection, enter and exit the RTC initialization mode,
- RTC registers synchronization check and reference clock detection enable.
- (#) The RTC Prescaler is programmed to generate the RTC 1Hz time base.
- It is split into 2 programmable prescalers to minimize power consumption.
- (++) A 7-bit asynchronous prescaler and a 13-bit synchronous prescaler.
- (++) When both prescalers are used, it is recommended to configure the
- asynchronous prescaler to a high value to minimize power consumption.
- (#) All RTC registers are Write protected. Writing to the RTC registers
- is enabled by writing a key into the Write Protection register, RTC_WPR.
- (#) To configure the RTC Calendar, user application should enter
- initialization mode. In this mode, the calendar counter is stopped
- and its value can be updated. When the initialization sequence is
- complete, the calendar restarts counting after 4 RTCCLK cycles.
- (#) To read the calendar through the shadow registers after Calendar
- initialization, calendar update or after wake-up from low power modes
- the software must first clear the RSF flag. The software must then
- wait until it is set again before reading the calendar, which means
- that the calendar registers have been correctly copied into the
- RTC_TR and RTC_DR shadow registers.The HAL_RTC_WaitForSynchro() function
- implements the above software sequence (RSF clear and RSF check).
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the RTC peripheral
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc)
-{
- /* Check the RTC peripheral state */
- if(hrtc == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_RTC_HOUR_FORMAT(hrtc->Init.HourFormat));
- assert_param(IS_RTC_ASYNCH_PREDIV(hrtc->Init.AsynchPrediv));
- assert_param(IS_RTC_SYNCH_PREDIV(hrtc->Init.SynchPrediv));
- assert_param (IS_RTC_OUTPUT(hrtc->Init.OutPut));
- assert_param (IS_RTC_OUTPUT_POL(hrtc->Init.OutPutPolarity));
- assert_param(IS_RTC_OUTPUT_TYPE(hrtc->Init.OutPutType));
-
- if(hrtc->State == HAL_RTC_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hrtc->Lock = HAL_UNLOCKED;
- /* Initialize RTC MSP */
- HAL_RTC_MspInit(hrtc);
- }
-
- /* Set RTC state */
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- /* Set Initialization mode */
- if(RTC_EnterInitMode(hrtc) != HAL_OK)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Set RTC state */
- hrtc->State = HAL_RTC_STATE_ERROR;
-
- return HAL_ERROR;
- }
- else
- {
- /* Clear RTC_CR FMT, OSEL and POL Bits */
- hrtc->Instance->CR &= ((uint32_t)~(RTC_CR_FMT | RTC_CR_OSEL | RTC_CR_POL));
- /* Set RTC_CR register */
- hrtc->Instance->CR |= (uint32_t)(hrtc->Init.HourFormat | hrtc->Init.OutPut | hrtc->Init.OutPutPolarity);
-
- /* Configure the RTC PRER */
- hrtc->Instance->PRER = (uint32_t)(hrtc->Init.SynchPrediv);
- hrtc->Instance->PRER |= (uint32_t)(hrtc->Init.AsynchPrediv << 16);
-
- /* Exit Initialization mode */
- hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
-
- hrtc->Instance->TAFCR &= (uint32_t)~RTC_TAFCR_ALARMOUTTYPE;
- hrtc->Instance->TAFCR |= (uint32_t)(hrtc->Init.OutPutType);
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Set RTC state */
- hrtc->State = HAL_RTC_STATE_READY;
-
- return HAL_OK;
- }
-}
-
-/**
- * @brief DeInitializes the RTC peripheral
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @note This function doesn't reset the RTC Backup Data registers.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc)
-{
- uint32_t tickstart = 0;
-
- /* Set RTC state */
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- /* Set Initialization mode */
- if(RTC_EnterInitMode(hrtc) != HAL_OK)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Set RTC state */
- hrtc->State = HAL_RTC_STATE_ERROR;
-
- return HAL_ERROR;
- }
- else
- {
- /* Reset TR, DR and CR registers */
- hrtc->Instance->TR = (uint32_t)0x00000000;
- hrtc->Instance->DR = (uint32_t)0x00002101;
- /* Reset All CR bits except CR[2:0] */
- hrtc->Instance->CR &= (uint32_t)0x00000007;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait till WUTWF flag is set and if Time out is reached exit */
- while(((hrtc->Instance->ISR) & RTC_ISR_WUTWF) == (uint32_t)RESET)
- {
- if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Set RTC state */
- hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
- return HAL_TIMEOUT;
- }
- }
-
- /* Reset all RTC CR register bits */
- hrtc->Instance->CR &= (uint32_t)0x00000000;
- hrtc->Instance->WUTR = (uint32_t)0x0000FFFF;
- hrtc->Instance->PRER = (uint32_t)0x007F00FF;
- hrtc->Instance->CALIBR = (uint32_t)0x00000000;
- hrtc->Instance->ALRMAR = (uint32_t)0x00000000;
- hrtc->Instance->ALRMBR = (uint32_t)0x00000000;
- hrtc->Instance->SHIFTR = (uint32_t)0x00000000;
- hrtc->Instance->CALR = (uint32_t)0x00000000;
- hrtc->Instance->ALRMASSR = (uint32_t)0x00000000;
- hrtc->Instance->ALRMBSSR = (uint32_t)0x00000000;
-
- /* Reset ISR register and exit initialization mode */
- hrtc->Instance->ISR = (uint32_t)0x00000000;
-
- /* Reset Tamper and alternate functions configuration register */
- hrtc->Instance->TAFCR = 0x00000000;
-
- /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
- if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
- {
- if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_ERROR;
-
- return HAL_ERROR;
- }
- }
- }
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* De-Initialize RTC MSP */
- HAL_RTC_MspDeInit(hrtc);
-
- hrtc->State = HAL_RTC_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the RTC MSP.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval None
- */
-__weak void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_RTC_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes the RTC MSP.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval None
- */
-__weak void HAL_RTC_MspDeInit(RTC_HandleTypeDef* hrtc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_RTC_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup RTC_Exported_Functions_Group2 RTC Time and Date functions
- * @brief RTC Time and Date functions
- *
-@verbatim
- ===============================================================================
- ##### RTC Time and Date functions #####
- ===============================================================================
-
- [..] This section provides functions allowing to configure Time and Date features
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Sets RTC current time.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param sTime: Pointer to Time structure
- * @param Format: Specifies the format of the entered parameters.
- * This parameter can be one of the following values:
- * @arg RTC_FORMAT_BIN: Binary data format
- * @arg RTC_FORMAT_BCD: BCD data format
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
-{
- uint32_t tmpreg = 0;
-
- /* Check the parameters */
- assert_param(IS_RTC_FORMAT(Format));
- assert_param(IS_RTC_DAYLIGHT_SAVING(sTime->DayLightSaving));
- assert_param(IS_RTC_STORE_OPERATION(sTime->StoreOperation));
-
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- if(Format == RTC_FORMAT_BIN)
- {
- if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
- {
- assert_param(IS_RTC_HOUR12(sTime->Hours));
- assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat));
- }
- else
- {
- sTime->TimeFormat = 0x00;
- assert_param(IS_RTC_HOUR24(sTime->Hours));
- }
- assert_param(IS_RTC_MINUTES(sTime->Minutes));
- assert_param(IS_RTC_SECONDS(sTime->Seconds));
-
- tmpreg = (uint32_t)(((uint32_t)RTC_ByteToBcd2(sTime->Hours) << 16) | \
- ((uint32_t)RTC_ByteToBcd2(sTime->Minutes) << 8) | \
- ((uint32_t)RTC_ByteToBcd2(sTime->Seconds)) | \
- (((uint32_t)sTime->TimeFormat) << 16));
- }
- else
- {
- if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
- {
- tmpreg = RTC_Bcd2ToByte(sTime->Hours);
- assert_param(IS_RTC_HOUR12(tmpreg));
- assert_param(IS_RTC_HOURFORMAT12(sTime->TimeFormat));
- }
- else
- {
- sTime->TimeFormat = 0x00;
- assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sTime->Hours)));
- }
- assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sTime->Minutes)));
- assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sTime->Seconds)));
- tmpreg = (((uint32_t)(sTime->Hours) << 16) | \
- ((uint32_t)(sTime->Minutes) << 8) | \
- ((uint32_t)sTime->Seconds) | \
- ((uint32_t)(sTime->TimeFormat) << 16));
- }
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- /* Set Initialization mode */
- if(RTC_EnterInitMode(hrtc) != HAL_OK)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Set RTC state */
- hrtc->State = HAL_RTC_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_ERROR;
- }
- else
- {
- /* Set the RTC_TR register */
- hrtc->Instance->TR = (uint32_t)(tmpreg & RTC_TR_RESERVED_MASK);
-
- /* Clear the bits to be configured */
- hrtc->Instance->CR &= (uint32_t)~RTC_CR_BCK;
-
- /* Configure the RTC_CR register */
- hrtc->Instance->CR |= (uint32_t)(sTime->DayLightSaving | sTime->StoreOperation);
-
- /* Exit Initialization mode */
- hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
-
- /* If CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
- if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
- {
- if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_ERROR;
- }
- }
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_READY;
-
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
- }
-}
-
-/**
- * @brief Gets RTC current time.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param sTime: Pointer to Time structure
- * @param Format: Specifies the format of the entered parameters.
- * This parameter can be one of the following values:
- * @arg RTC_FORMAT_BIN: Binary data format
- * @arg RTC_FORMAT_BCD: BCD data format
- * @note You can use SubSeconds and SecondFraction (sTime structure fields returned) to convert SubSeconds
- * value in second fraction ratio with time unit following generic formula:
- * Second fraction ratio * time_unit= [(SecondFraction-SubSeconds)/(SecondFraction+1)] * time_unit
- * This conversion can be performed only if no shift operation is pending (ie. SHFP=0) when PREDIV_S >= SS
- * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values
- * in the higher-order calendar shadow registers to ensure consistency between the time and date values.
- * Reading RTC current time locks the values in calendar shadow registers until current date is read.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format)
-{
- uint32_t tmpreg = 0;
-
- /* Check the parameters */
- assert_param(IS_RTC_FORMAT(Format));
-
- /* Get subseconds structure field from the corresponding register */
- sTime->SubSeconds = (uint32_t)(hrtc->Instance->SSR);
-
- /* Get SecondFraction structure field from the corresponding register field */
- sTime->SecondFraction = (uint32_t)(hrtc->Instance->PRER & RTC_PRER_PREDIV_S);
-
- /* Get the TR register */
- tmpreg = (uint32_t)(hrtc->Instance->TR & RTC_TR_RESERVED_MASK);
-
- /* Fill the structure fields with the read parameters */
- sTime->Hours = (uint8_t)((tmpreg & (RTC_TR_HT | RTC_TR_HU)) >> 16);
- sTime->Minutes = (uint8_t)((tmpreg & (RTC_TR_MNT | RTC_TR_MNU)) >>8);
- sTime->Seconds = (uint8_t)(tmpreg & (RTC_TR_ST | RTC_TR_SU));
- sTime->TimeFormat = (uint8_t)((tmpreg & (RTC_TR_PM)) >> 16);
-
- /* Check the input parameters format */
- if(Format == RTC_FORMAT_BIN)
- {
- /* Convert the time structure parameters to Binary format */
- sTime->Hours = (uint8_t)RTC_Bcd2ToByte(sTime->Hours);
- sTime->Minutes = (uint8_t)RTC_Bcd2ToByte(sTime->Minutes);
- sTime->Seconds = (uint8_t)RTC_Bcd2ToByte(sTime->Seconds);
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Sets RTC current date.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param sDate: Pointer to date structure
- * @param Format: specifies the format of the entered parameters.
- * This parameter can be one of the following values:
- * @arg RTC_FORMAT_BIN: Binary data format
- * @arg RTC_FORMAT_BCD: BCD data format
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
-{
- uint32_t datetmpreg = 0;
-
- /* Check the parameters */
- assert_param(IS_RTC_FORMAT(Format));
-
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- if((Format == RTC_FORMAT_BIN) && ((sDate->Month & 0x10) == 0x10))
- {
- sDate->Month = (uint8_t)((sDate->Month & (uint8_t)~(0x10)) + (uint8_t)0x0A);
- }
-
- assert_param(IS_RTC_WEEKDAY(sDate->WeekDay));
-
- if(Format == RTC_FORMAT_BIN)
- {
- assert_param(IS_RTC_YEAR(sDate->Year));
- assert_param(IS_RTC_MONTH(sDate->Month));
- assert_param(IS_RTC_DATE(sDate->Date));
-
- datetmpreg = (((uint32_t)RTC_ByteToBcd2(sDate->Year) << 16) | \
- ((uint32_t)RTC_ByteToBcd2(sDate->Month) << 8) | \
- ((uint32_t)RTC_ByteToBcd2(sDate->Date)) | \
- ((uint32_t)sDate->WeekDay << 13));
- }
- else
- {
- assert_param(IS_RTC_YEAR(RTC_Bcd2ToByte(sDate->Year)));
- datetmpreg = RTC_Bcd2ToByte(sDate->Month);
- assert_param(IS_RTC_MONTH(datetmpreg));
- datetmpreg = RTC_Bcd2ToByte(sDate->Date);
- assert_param(IS_RTC_DATE(datetmpreg));
-
- datetmpreg = ((((uint32_t)sDate->Year) << 16) | \
- (((uint32_t)sDate->Month) << 8) | \
- ((uint32_t)sDate->Date) | \
- (((uint32_t)sDate->WeekDay) << 13));
- }
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- /* Set Initialization mode */
- if(RTC_EnterInitMode(hrtc) != HAL_OK)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Set RTC state*/
- hrtc->State = HAL_RTC_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_ERROR;
- }
- else
- {
- /* Set the RTC_DR register */
- hrtc->Instance->DR = (uint32_t)(datetmpreg & RTC_DR_RESERVED_MASK);
-
- /* Exit Initialization mode */
- hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
-
- /* If CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
- if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
- {
- if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_ERROR;
- }
- }
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_READY ;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
- }
-}
-
-/**
- * @brief Gets RTC current date.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param sDate: Pointer to Date structure
- * @param Format: Specifies the format of the entered parameters.
- * This parameter can be one of the following values:
- * @arg RTC_FORMAT_BIN: Binary data format
- * @arg RTC_FORMAT_BCD: BCD data format
- * @note You must call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values
- * in the higher-order calendar shadow registers to ensure consistency between the time and date values.
- * Reading RTC current time locks the values in calendar shadow registers until Current date is read.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format)
-{
- uint32_t datetmpreg = 0;
-
- /* Check the parameters */
- assert_param(IS_RTC_FORMAT(Format));
-
- /* Get the DR register */
- datetmpreg = (uint32_t)(hrtc->Instance->DR & RTC_DR_RESERVED_MASK);
-
- /* Fill the structure fields with the read parameters */
- sDate->Year = (uint8_t)((datetmpreg & (RTC_DR_YT | RTC_DR_YU)) >> 16);
- sDate->Month = (uint8_t)((datetmpreg & (RTC_DR_MT | RTC_DR_MU)) >> 8);
- sDate->Date = (uint8_t)(datetmpreg & (RTC_DR_DT | RTC_DR_DU));
- sDate->WeekDay = (uint8_t)((datetmpreg & (RTC_DR_WDU)) >> 13);
-
- /* Check the input parameters format */
- if(Format == RTC_FORMAT_BIN)
- {
- /* Convert the date structure parameters to Binary format */
- sDate->Year = (uint8_t)RTC_Bcd2ToByte(sDate->Year);
- sDate->Month = (uint8_t)RTC_Bcd2ToByte(sDate->Month);
- sDate->Date = (uint8_t)RTC_Bcd2ToByte(sDate->Date);
- }
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup RTC_Exported_Functions_Group3 RTC Alarm functions
- * @brief RTC Alarm functions
- *
-@verbatim
- ===============================================================================
- ##### RTC Alarm functions #####
- ===============================================================================
-
- [..] This section provides functions allowing to configure Alarm feature
-
-@endverbatim
- * @{
- */
-/**
- * @brief Sets the specified RTC Alarm.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param sAlarm: Pointer to Alarm structure
- * @param Format: Specifies the format of the entered parameters.
- * This parameter can be one of the following values:
- * @arg RTC_FORMAT_BIN: Binary data format
- * @arg RTC_FORMAT_BCD: BCD data format
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format)
-{
- uint32_t tickstart = 0;
- uint32_t tmpreg = 0, subsecondtmpreg = 0;
-
- /* Check the parameters */
- assert_param(IS_RTC_FORMAT(Format));
- assert_param(IS_RTC_ALARM(sAlarm->Alarm));
- assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask));
- assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel));
- assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds));
- assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask));
-
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- if(Format == RTC_FORMAT_BIN)
- {
- if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
- {
- assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours));
- assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
- }
- else
- {
- sAlarm->AlarmTime.TimeFormat = 0x00;
- assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours));
- }
- assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes));
- assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds));
-
- if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
- {
- assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay));
- }
- else
- {
- assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay));
- }
-
- tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << 16) | \
- ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << 8) | \
- ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \
- ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \
- ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << 24) | \
- ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
- ((uint32_t)sAlarm->AlarmMask));
- }
- else
- {
- if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
- {
- tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours);
- assert_param(IS_RTC_HOUR12(tmpreg));
- assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
- }
- else
- {
- sAlarm->AlarmTime.TimeFormat = 0x00;
- assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
- }
-
- assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)));
- assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
-
- if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
- {
- tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
- assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(tmpreg));
- }
- else
- {
- tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
- assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(tmpreg));
- }
-
- tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << 16) | \
- ((uint32_t)(sAlarm->AlarmTime.Minutes) << 8) | \
- ((uint32_t) sAlarm->AlarmTime.Seconds) | \
- ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \
- ((uint32_t)(sAlarm->AlarmDateWeekDay) << 24) | \
- ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
- ((uint32_t)sAlarm->AlarmMask));
- }
-
- /* Configure the Alarm A or Alarm B Sub Second registers */
- subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask));
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- /* Configure the Alarm register */
- if(sAlarm->Alarm == RTC_ALARM_A)
- {
- /* Disable the Alarm A interrupt */
- __HAL_RTC_ALARMA_DISABLE(hrtc);
-
- /* In case of interrupt mode is used, the interrupt source must disabled */
- __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */
- while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_TIMEOUT;
- }
- }
-
- hrtc->Instance->ALRMAR = (uint32_t)tmpreg;
- /* Configure the Alarm A Sub Second register */
- hrtc->Instance->ALRMASSR = subsecondtmpreg;
- /* Configure the Alarm state: Enable Alarm */
- __HAL_RTC_ALARMA_ENABLE(hrtc);
- }
- else
- {
- /* Disable the Alarm B interrupt */
- __HAL_RTC_ALARMB_DISABLE(hrtc);
-
- /* In case of interrupt mode is used, the interrupt source must disabled */
- __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRB);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait till RTC ALRBWF flag is set and if Time out is reached exit */
- while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_TIMEOUT;
- }
- }
-
- hrtc->Instance->ALRMBR = (uint32_t)tmpreg;
- /* Configure the Alarm B Sub Second register */
- hrtc->Instance->ALRMBSSR = subsecondtmpreg;
- /* Configure the Alarm state: Enable Alarm */
- __HAL_RTC_ALARMB_ENABLE(hrtc);
- }
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Change RTC state */
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Sets the specified RTC Alarm with Interrupt
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param sAlarm: Pointer to Alarm structure
- * @param Format: Specifies the format of the entered parameters.
- * This parameter can be one of the following values:
- * @arg RTC_FORMAT_BIN: Binary data format
- * @arg RTC_FORMAT_BCD: BCD data format
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format)
-{
- uint32_t tickstart = 0;
- uint32_t tmpreg = 0, subsecondtmpreg = 0;
-
- /* Check the parameters */
- assert_param(IS_RTC_FORMAT(Format));
- assert_param(IS_RTC_ALARM(sAlarm->Alarm));
- assert_param(IS_RTC_ALARM_MASK(sAlarm->AlarmMask));
- assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel));
- assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds));
- assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask));
-
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- if(Format == RTC_FORMAT_BIN)
- {
- if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
- {
- assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours));
- assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
- }
- else
- {
- sAlarm->AlarmTime.TimeFormat = 0x00;
- assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours));
- }
- assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes));
- assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds));
-
- if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
- {
- assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay));
- }
- else
- {
- assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay));
- }
- tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << 16) | \
- ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << 8) | \
- ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \
- ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \
- ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << 24) | \
- ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
- ((uint32_t)sAlarm->AlarmMask));
- }
- else
- {
- if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET)
- {
- tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours);
- assert_param(IS_RTC_HOUR12(tmpreg));
- assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat));
- }
- else
- {
- sAlarm->AlarmTime.TimeFormat = 0x00;
- assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours)));
- }
-
- assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes)));
- assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds)));
-
- if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE)
- {
- tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
- assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(tmpreg));
- }
- else
- {
- tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
- assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(tmpreg));
- }
- tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << 16) | \
- ((uint32_t)(sAlarm->AlarmTime.Minutes) << 8) | \
- ((uint32_t) sAlarm->AlarmTime.Seconds) | \
- ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \
- ((uint32_t)(sAlarm->AlarmDateWeekDay) << 24) | \
- ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \
- ((uint32_t)sAlarm->AlarmMask));
- }
- /* Configure the Alarm A or Alarm B Sub Second registers */
- subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask));
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- /* Configure the Alarm register */
- if(sAlarm->Alarm == RTC_ALARM_A)
- {
- /* Disable the Alarm A interrupt */
- __HAL_RTC_ALARMA_DISABLE(hrtc);
-
- /* Clear flag alarm A */
- __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */
- while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_TIMEOUT;
- }
- }
-
- hrtc->Instance->ALRMAR = (uint32_t)tmpreg;
- /* Configure the Alarm A Sub Second register */
- hrtc->Instance->ALRMASSR = subsecondtmpreg;
- /* Configure the Alarm state: Enable Alarm */
- __HAL_RTC_ALARMA_ENABLE(hrtc);
- /* Configure the Alarm interrupt */
- __HAL_RTC_ALARM_ENABLE_IT(hrtc,RTC_IT_ALRA);
- }
- else
- {
- /* Disable the Alarm B interrupt */
- __HAL_RTC_ALARMB_DISABLE(hrtc);
-
- /* Clear flag alarm B */
- __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait till RTC ALRBWF flag is set and if Time out is reached exit */
- while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_TIMEOUT;
- }
- }
-
- hrtc->Instance->ALRMBR = (uint32_t)tmpreg;
- /* Configure the Alarm B Sub Second register */
- hrtc->Instance->ALRMBSSR = subsecondtmpreg;
- /* Configure the Alarm state: Enable Alarm */
- __HAL_RTC_ALARMB_ENABLE(hrtc);
- /* Configure the Alarm interrupt */
- __HAL_RTC_ALARM_ENABLE_IT(hrtc, RTC_IT_ALRB);
- }
-
- /* RTC Alarm Interrupt Configuration: EXTI configuration */
- __HAL_RTC_ALARM_EXTI_ENABLE_IT();
-
- EXTI->RTSR |= RTC_EXTI_LINE_ALARM_EVENT;
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Deactivate the specified RTC Alarm
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param Alarm: Specifies the Alarm.
- * This parameter can be one of the following values:
- * @arg RTC_ALARM_A: AlarmA
- * @arg RTC_ALARM_B: AlarmB
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm)
-{
- uint32_t tickstart = 0;
-
- /* Check the parameters */
- assert_param(IS_RTC_ALARM(Alarm));
-
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- if(Alarm == RTC_ALARM_A)
- {
- /* AlarmA */
- __HAL_RTC_ALARMA_DISABLE(hrtc);
-
- /* In case of interrupt mode is used, the interrupt source must disabled */
- __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */
- while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_TIMEOUT;
- }
- }
- }
- else
- {
- /* AlarmB */
- __HAL_RTC_ALARMB_DISABLE(hrtc);
-
- /* In case of interrupt mode is used, the interrupt source must disabled */
- __HAL_RTC_ALARM_DISABLE_IT(hrtc,RTC_IT_ALRB);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait till RTC ALRxWF flag is set and if Time out is reached exit */
- while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_TIMEOUT;
- }
- }
- }
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Gets the RTC Alarm value and masks.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param sAlarm: Pointer to Date structure
- * @param Alarm: Specifies the Alarm.
- * This parameter can be one of the following values:
- * @arg RTC_ALARM_A: AlarmA
- * @arg RTC_ALARM_B: AlarmB
- * @param Format: Specifies the format of the entered parameters.
- * This parameter can be one of the following values:
- * @arg RTC_FORMAT_BIN: Binary data format
- * @arg RTC_FORMAT_BCD: BCD data format
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format)
-{
- uint32_t tmpreg = 0, subsecondtmpreg = 0;
-
- /* Check the parameters */
- assert_param(IS_RTC_FORMAT(Format));
- assert_param(IS_RTC_ALARM(Alarm));
-
- if(Alarm == RTC_ALARM_A)
- {
- /* AlarmA */
- sAlarm->Alarm = RTC_ALARM_A;
-
- tmpreg = (uint32_t)(hrtc->Instance->ALRMAR);
- subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMASSR ) & RTC_ALRMASSR_SS);
- }
- else
- {
- sAlarm->Alarm = RTC_ALARM_B;
-
- tmpreg = (uint32_t)(hrtc->Instance->ALRMBR);
- subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMBSSR) & RTC_ALRMBSSR_SS);
- }
-
- /* Fill the structure with the read parameters */
- sAlarm->AlarmTime.Hours = (uint32_t)((tmpreg & (RTC_ALRMAR_HT | RTC_ALRMAR_HU)) >> 16);
- sAlarm->AlarmTime.Minutes = (uint32_t)((tmpreg & (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU)) >> 8);
- sAlarm->AlarmTime.Seconds = (uint32_t)(tmpreg & (RTC_ALRMAR_ST | RTC_ALRMAR_SU));
- sAlarm->AlarmTime.TimeFormat = (uint32_t)((tmpreg & RTC_ALRMAR_PM) >> 16);
- sAlarm->AlarmTime.SubSeconds = (uint32_t) subsecondtmpreg;
- sAlarm->AlarmDateWeekDay = (uint32_t)((tmpreg & (RTC_ALRMAR_DT | RTC_ALRMAR_DU)) >> 24);
- sAlarm->AlarmDateWeekDaySel = (uint32_t)(tmpreg & RTC_ALRMAR_WDSEL);
- sAlarm->AlarmMask = (uint32_t)(tmpreg & RTC_ALARMMASK_ALL);
-
- if(Format == RTC_FORMAT_BIN)
- {
- sAlarm->AlarmTime.Hours = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours);
- sAlarm->AlarmTime.Minutes = RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes);
- sAlarm->AlarmTime.Seconds = RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds);
- sAlarm->AlarmDateWeekDay = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay);
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief This function handles Alarm interrupt request.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval None
- */
-void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef* hrtc)
-{
- if(__HAL_RTC_ALARM_GET_IT(hrtc, RTC_IT_ALRA))
- {
- /* Get the status of the Interrupt */
- if((uint32_t)(hrtc->Instance->CR & RTC_IT_ALRA) != (uint32_t)RESET)
- {
- /* AlarmA callback */
- HAL_RTC_AlarmAEventCallback(hrtc);
-
- /* Clear the Alarm interrupt pending bit */
- __HAL_RTC_ALARM_CLEAR_FLAG(hrtc,RTC_FLAG_ALRAF);
- }
- }
-
- if(__HAL_RTC_ALARM_GET_IT(hrtc, RTC_IT_ALRB))
- {
- /* Get the status of the Interrupt */
- if((uint32_t)(hrtc->Instance->CR & RTC_IT_ALRB) != (uint32_t)RESET)
- {
- /* AlarmB callback */
- HAL_RTCEx_AlarmBEventCallback(hrtc);
-
- /* Clear the Alarm interrupt pending bit */
- __HAL_RTC_ALARM_CLEAR_FLAG(hrtc,RTC_FLAG_ALRBF);
- }
- }
-
- /* Clear the EXTI's line Flag for RTC Alarm */
- __HAL_RTC_ALARM_EXTI_CLEAR_FLAG();
-
- /* Change RTC state */
- hrtc->State = HAL_RTC_STATE_READY;
-}
-
-/**
- * @brief Alarm A callback.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval None
- */
-__weak void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_RTC_AlarmAEventCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief This function handles AlarmA Polling request.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAF) == RESET)
- {
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- hrtc->State = HAL_RTC_STATE_TIMEOUT;
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Clear the Alarm interrupt pending bit */
- __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF);
-
- /* Change RTC state */
- hrtc->State = HAL_RTC_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup RTC_Exported_Functions_Group4 Peripheral Control functions
- * @brief Peripheral Control functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Control functions #####
- ===============================================================================
- [..]
- This subsection provides functions allowing to
- (+) Wait for RTC Time and Date Synchronization
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Waits until the RTC Time and Date registers (RTC_TR and RTC_DR) are
- * synchronized with RTC APB clock.
- * @note The RTC Resynchronization mode is write protected, use the
- * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function.
- * @note To read the calendar through the shadow registers after Calendar
- * initialization, calendar update or after wake-up from low power modes
- * the software must first clear the RSF flag.
- * The software must then wait until it is set again before reading
- * the calendar, which means that the calendar registers have been
- * correctly copied into the RTC_TR and RTC_DR shadow registers.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc)
-{
- uint32_t tickstart = 0;
-
- /* Clear RSF flag */
- hrtc->Instance->ISR &= (uint32_t)RTC_RSF_MASK;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait the registers to be synchronised */
- while((hrtc->Instance->ISR & RTC_ISR_RSF) == (uint32_t)RESET)
- {
- if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup RTC_Exported_Functions_Group5 Peripheral State functions
- * @brief Peripheral State functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral State functions #####
- ===============================================================================
- [..]
- This subsection provides functions allowing to
- (+) Get RTC state
-
-@endverbatim
- * @{
- */
-/**
- * @brief Returns the RTC state.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval HAL state
- */
-HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef* hrtc)
-{
- return hrtc->State;
-}
-
-/**
- * @}
- */
-
-/**
- * @brief Enters the RTC Initialization mode.
- * @note The RTC Initialization mode is write protected, use the
- * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval HAL status
- */
-HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc)
-{
- uint32_t tickstart = 0;
-
- /* Check if the Initialization mode is set */
- if((hrtc->Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET)
- {
- /* Set the Initialization mode */
- hrtc->Instance->ISR = (uint32_t)RTC_INIT_MASK;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait till RTC is in INIT state and if Time out is reached exit */
- while((hrtc->Instance->ISR & RTC_ISR_INITF) == (uint32_t)RESET)
- {
- if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
- {
- return HAL_TIMEOUT;
- }
- }
- }
-
- return HAL_OK;
-}
-
-
-/**
- * @brief Converts a 2 digit decimal to BCD format.
- * @param Value: Byte to be converted
- * @retval Converted byte
- */
-uint8_t RTC_ByteToBcd2(uint8_t Value)
-{
- uint32_t bcdhigh = 0;
-
- while(Value >= 10)
- {
- bcdhigh++;
- Value -= 10;
- }
-
- return ((uint8_t)(bcdhigh << 4) | Value);
-}
-
-/**
- * @brief Converts from 2 digit BCD to Binary.
- * @param Value: BCD value to be converted
- * @retval Converted word
- */
-uint8_t RTC_Bcd2ToByte(uint8_t Value)
-{
- uint32_t tmp = 0;
- tmp = ((uint8_t)(Value & (uint8_t)0xF0) >> (uint8_t)0x4) * 10;
- return (tmp + (Value & (uint8_t)0x0F));
-}
-
-/**
- * @}
- */
-
-#endif /* HAL_RTC_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc_ex.c
deleted file mode 100644
index cafbe8a..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rtc_ex.c
+++ /dev/null
@@ -1,1710 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_rtc_ex.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief RTC HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Real Time Clock (RTC) Extension peripheral:
- * + RTC Time Stamp functions
- * + RTC Tamper functions
- * + RTC Wake-up functions
- * + Extension Control functions
- * + Extension RTC features functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (+) Enable the RTC domain access.
- (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour
- format using the HAL_RTC_Init() function.
-
- *** RTC Wake-up configuration ***
- ================================
- [..]
- (+) To configure the RTC Wake-up Clock source and Counter use the HAL_RTC_SetWakeUpTimer()
- function. You can also configure the RTC Wake-up timer in interrupt mode
- using the HAL_RTC_SetWakeUpTimer_IT() function.
- (+) To read the RTC Wake-up Counter register, use the HAL_RTC_GetWakeUpTimer()
- function.
-
- *** TimeStamp configuration ***
- ===============================
- [..]
- (+) Configure the RTC_AFx trigger and enable the RTC TimeStamp using the
- HAL_RTC_SetTimeStamp() function. You can also configure the RTC TimeStamp with
- interrupt mode using the HAL_RTC_SetTimeStamp_IT() function.
- (+) To read the RTC TimeStamp Time and Date register, use the HAL_RTC_GetTimeStamp()
- function.
- (+) The TIMESTAMP alternate function can be mapped either to RTC_AF1 (PC13)
- or RTC_AF2 (PI8 or PA0 only for STM32F446xx devices) depending on the value of TSINSEL bit in
- RTC_TAFCR register. The corresponding pin is also selected by HAL_RTC_SetTimeStamp()
- or HAL_RTC_SetTimeStamp_IT() function.
-
- *** Tamper configuration ***
- ============================
- [..]
- (+) Enable the RTC Tamper and configure the Tamper filter count, trigger Edge
- or Level according to the Tamper filter (if equal to 0 Edge else Level)
- value, sampling frequency, precharge or discharge and Pull-UP using the
- HAL_RTC_SetTamper() function. You can configure RTC Tamper in interrupt
- mode using HAL_RTC_SetTamper_IT() function.
- (+) The TAMPER1 alternate function can be mapped either to RTC_AF1 (PC13)
- or RTC_AF2 (PI8 or PA0 only for STM32F446xx devices) depending on the value of TAMP1INSEL bit in
- RTC_TAFCR register. The corresponding pin is also selected by HAL_RTC_SetTamper()
- or HAL_RTC_SetTamper_IT() function.
-
- *** Backup Data Registers configuration ***
- ===========================================
- [..]
- (+) To write to the RTC Backup Data registers, use the HAL_RTC_BKUPWrite()
- function.
- (+) To read the RTC Backup Data registers, use the HAL_RTC_BKUPRead()
- function.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup RTCEx RTCEx
- * @brief RTC HAL module driver
- * @{
- */
-
-#ifdef HAL_RTC_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions
- * @{
- */
-
-/** @defgroup RTCEx_Exported_Functions_Group1 RTC TimeStamp and Tamper functions
- * @brief RTC TimeStamp and Tamper functions
- *
-@verbatim
- ===============================================================================
- ##### RTC TimeStamp and Tamper functions #####
- ===============================================================================
-
- [..] This section provides functions allowing to configure TimeStamp feature
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Sets TimeStamp.
- * @note This API must be called before enabling the TimeStamp feature.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param TimeStampEdge: Specifies the pin edge on which the TimeStamp is
- * activated.
- * This parameter can be one of the following values:
- * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the
- * rising edge of the related pin.
- * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the
- * falling edge of the related pin.
- * @param RTC_TimeStampPin: specifies the RTC TimeStamp Pin.
- * This parameter can be one of the following values:
- * @arg RTC_TIMESTAMPPIN_DEFAULT: PC13 is selected as RTC TimeStamp Pin.
- * @arg RTC_TIMESTAMPPIN_POS1: PI8/PA0 is selected as RTC TimeStamp Pin.
- * (PI8 for all STM32 devices except for STM32F446xx devices the PA0 is used)
- * @arg RTC_TIMESTAMPPIN_PA0: PA0 is selected as RTC TimeStamp Pin only for STM32F446xx devices
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin)
-{
- uint32_t tmpreg = 0;
-
- /* Check the parameters */
- assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge));
- assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));
-
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- /* Get the RTC_CR register and clear the bits to be configured */
- tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
-
- tmpreg|= TimeStampEdge;
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- hrtc->Instance->TAFCR &= (uint32_t)~RTC_TAFCR_TSINSEL;
- hrtc->Instance->TAFCR |= (uint32_t)(RTC_TimeStampPin);
-
- /* Configure the Time Stamp TSEDGE and Enable bits */
- hrtc->Instance->CR = (uint32_t)tmpreg;
-
- __HAL_RTC_TIMESTAMP_ENABLE(hrtc);
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Change RTC state */
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Sets TimeStamp with Interrupt.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @note This API must be called before enabling the TimeStamp feature.
- * @param TimeStampEdge: Specifies the pin edge on which the TimeStamp is
- * activated.
- * This parameter can be one of the following values:
- * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the
- * rising edge of the related pin.
- * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the
- * falling edge of the related pin.
- * @param RTC_TimeStampPin: Specifies the RTC TimeStamp Pin.
- * This parameter can be one of the following values:
- * @arg RTC_TIMESTAMPPIN_PC13: PC13 is selected as RTC TimeStamp Pin.
- * @arg RTC_TIMESTAMPPIN_PI8: PI8 is selected as RTC TimeStamp Pin. (not applicable in the case of STM32F446xx devices)
- * @arg RTC_TIMESTAMPPIN_PA0: PA0 is selected as RTC TimeStamp Pin only for STM32F446xx devices
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin)
-{
- uint32_t tmpreg = 0;
-
- /* Check the parameters */
- assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge));
- assert_param(IS_RTC_TIMESTAMP_PIN(RTC_TimeStampPin));
-
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- /* Get the RTC_CR register and clear the bits to be configured */
- tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
-
- tmpreg |= TimeStampEdge;
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- /* Configure the Time Stamp TSEDGE and Enable bits */
- hrtc->Instance->CR = (uint32_t)tmpreg;
-
- hrtc->Instance->TAFCR &= (uint32_t)~RTC_TAFCR_TSINSEL;
- hrtc->Instance->TAFCR |= (uint32_t)(RTC_TimeStampPin);
-
- __HAL_RTC_TIMESTAMP_ENABLE(hrtc);
-
- /* Enable IT timestamp */
- __HAL_RTC_TIMESTAMP_ENABLE_IT(hrtc,RTC_IT_TS);
-
- /* RTC timestamp Interrupt Configuration: EXTI configuration */
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
-
- EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT;
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Deactivates TimeStamp.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc)
-{
- uint32_t tmpreg = 0;
-
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- /* In case of interrupt mode is used, the interrupt source must disabled */
- __HAL_RTC_TIMESTAMP_DISABLE_IT(hrtc, RTC_IT_TS);
-
- /* Get the RTC_CR register and clear the bits to be configured */
- tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE));
-
- /* Configure the Time Stamp TSEDGE and Enable bits */
- hrtc->Instance->CR = (uint32_t)tmpreg;
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Gets the RTC TimeStamp value.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param sTimeStamp: Pointer to Time structure
- * @param sTimeStampDate: Pointer to Date structure
- * @param Format: specifies the format of the entered parameters.
- * This parameter can be one of the following values:
- * RTC_FORMAT_BIN: Binary data format
- * RTC_FORMAT_BCD: BCD data format
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef* sTimeStamp, RTC_DateTypeDef* sTimeStampDate, uint32_t Format)
-{
- uint32_t tmptime = 0, tmpdate = 0;
-
- /* Check the parameters */
- assert_param(IS_RTC_FORMAT(Format));
-
- /* Get the TimeStamp time and date registers values */
- tmptime = (uint32_t)(hrtc->Instance->TSTR & RTC_TR_RESERVED_MASK);
- tmpdate = (uint32_t)(hrtc->Instance->TSDR & RTC_DR_RESERVED_MASK);
-
- /* Fill the Time structure fields with the read parameters */
- sTimeStamp->Hours = (uint8_t)((tmptime & (RTC_TR_HT | RTC_TR_HU)) >> 16);
- sTimeStamp->Minutes = (uint8_t)((tmptime & (RTC_TR_MNT | RTC_TR_MNU)) >> 8);
- sTimeStamp->Seconds = (uint8_t)(tmptime & (RTC_TR_ST | RTC_TR_SU));
- sTimeStamp->TimeFormat = (uint8_t)((tmptime & (RTC_TR_PM)) >> 16);
- sTimeStamp->SubSeconds = (uint32_t) hrtc->Instance->TSSSR;
-
- /* Fill the Date structure fields with the read parameters */
- sTimeStampDate->Year = 0;
- sTimeStampDate->Month = (uint8_t)((tmpdate & (RTC_DR_MT | RTC_DR_MU)) >> 8);
- sTimeStampDate->Date = (uint8_t)(tmpdate & (RTC_DR_DT | RTC_DR_DU));
- sTimeStampDate->WeekDay = (uint8_t)((tmpdate & (RTC_DR_WDU)) >> 13);
-
- /* Check the input parameters format */
- if(Format == RTC_FORMAT_BIN)
- {
- /* Convert the TimeStamp structure parameters to Binary format */
- sTimeStamp->Hours = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Hours);
- sTimeStamp->Minutes = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Minutes);
- sTimeStamp->Seconds = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Seconds);
-
- /* Convert the DateTimeStamp structure parameters to Binary format */
- sTimeStampDate->Month = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Month);
- sTimeStampDate->Date = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Date);
- sTimeStampDate->WeekDay = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->WeekDay);
- }
-
- /* Clear the TIMESTAMP Flag */
- __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF);
-
- return HAL_OK;
-}
-
-/**
- * @brief Sets Tamper
- * @note By calling this API we disable the tamper interrupt for all tampers.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param sTamper: Pointer to Tamper Structure.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper)
-{
- uint32_t tmpreg = 0;
-
- /* Check the parameters */
- assert_param(IS_RTC_TAMPER(sTamper->Tamper));
- assert_param(IS_RTC_TAMPER_PIN(sTamper->PinSelection));
- assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));
- assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));
- assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));
- assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
- assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
- assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
-
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- if(sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE)
- {
- sTamper->Trigger = (uint32_t)(sTamper->Tamper << 1);
- }
-
- tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->PinSelection | (uint32_t)sTamper->Trigger |\
- (uint32_t)sTamper->Filter | (uint32_t)sTamper->SamplingFrequency | (uint32_t)sTamper->PrechargeDuration |\
- (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection);
-
- hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1) | (uint32_t)RTC_TAFCR_TAMPTS |\
- (uint32_t)RTC_TAFCR_TAMPFREQ | (uint32_t)RTC_TAFCR_TAMPFLT | (uint32_t)RTC_TAFCR_TAMPPRCH |\
- (uint32_t)RTC_TAFCR_TAMPPUDIS | (uint32_t)RTC_TAFCR_TAMPINSEL | (uint32_t)RTC_TAFCR_TAMPIE);
-
- hrtc->Instance->TAFCR |= tmpreg;
-
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Sets Tamper with interrupt.
- * @note By calling this API we force the tamper interrupt for all tampers.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param sTamper: Pointer to RTC Tamper.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper)
-{
- uint32_t tmpreg = 0;
-
- /* Check the parameters */
- assert_param(IS_RTC_TAMPER(sTamper->Tamper));
- assert_param(IS_RTC_TAMPER_PIN(sTamper->PinSelection));
- assert_param(IS_RTC_TAMPER_TRIGGER(sTamper->Trigger));
- assert_param(IS_RTC_TAMPER_FILTER(sTamper->Filter));
- assert_param(IS_RTC_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency));
- assert_param(IS_RTC_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration));
- assert_param(IS_RTC_TAMPER_PULLUP_STATE(sTamper->TamperPullUp));
- assert_param(IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection));
-
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- /* Configure the tamper trigger */
- if(sTamper->Trigger != RTC_TAMPERTRIGGER_RISINGEDGE)
- {
- sTamper->Trigger = (uint32_t)(sTamper->Tamper << 1);
- }
-
- tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->PinSelection | (uint32_t)sTamper->Trigger |\
- (uint32_t)sTamper->Filter | (uint32_t)sTamper->SamplingFrequency | (uint32_t)sTamper->PrechargeDuration |\
- (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection);
-
- hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1) | (uint32_t)RTC_TAFCR_TAMPTS |\
- (uint32_t)RTC_TAFCR_TAMPFREQ | (uint32_t)RTC_TAFCR_TAMPFLT | (uint32_t)RTC_TAFCR_TAMPPRCH |\
- (uint32_t)RTC_TAFCR_TAMPPUDIS | (uint32_t)RTC_TAFCR_TAMPINSEL);
-
- hrtc->Instance->TAFCR |= tmpreg;
-
- /* Configure the Tamper Interrupt in the RTC_TAFCR */
- hrtc->Instance->TAFCR |= (uint32_t)RTC_TAFCR_TAMPIE;
-
- /* RTC Tamper Interrupt Configuration: EXTI configuration */
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT();
-
- EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT;
-
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Deactivates Tamper.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param Tamper: Selected tamper pin.
- * This parameter can be RTC_Tamper_1 and/or RTC_TAMPER_2.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper)
-{
- assert_param(IS_RTC_TAMPER(Tamper));
-
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- /* Disable the selected Tamper pin */
- hrtc->Instance->TAFCR &= (uint32_t)~Tamper;
-
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief This function handles TimeStamp interrupt request.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval None
- */
-void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc)
-{
- if(__HAL_RTC_TIMESTAMP_GET_IT(hrtc, RTC_IT_TS))
- {
- /* Get the status of the Interrupt */
- if((uint32_t)(hrtc->Instance->CR & RTC_IT_TS) != (uint32_t)RESET)
- {
- /* TIMESTAMP callback */
- HAL_RTCEx_TimeStampEventCallback(hrtc);
-
- /* Clear the TIMESTAMP interrupt pending bit */
- __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc,RTC_FLAG_TSF);
- }
- }
-
- /* Get the status of the Interrupt */
- if(__HAL_RTC_TAMPER_GET_IT(hrtc,RTC_IT_TAMP1))
- {
- /* Get the TAMPER Interrupt enable bit and pending bit */
- if(((hrtc->Instance->TAFCR & (RTC_TAFCR_TAMPIE))) != (uint32_t)RESET)
- {
- /* Tamper callback */
- HAL_RTCEx_Tamper1EventCallback(hrtc);
-
- /* Clear the Tamper interrupt pending bit */
- __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP1F);
- }
- }
-
- /* Get the status of the Interrupt */
- if(__HAL_RTC_TAMPER_GET_IT(hrtc, RTC_IT_TAMP2))
- {
- /* Get the TAMPER Interrupt enable bit and pending bit */
- if(((hrtc->Instance->TAFCR & RTC_TAFCR_TAMPIE)) != (uint32_t)RESET)
- {
- /* Tamper callback */
- HAL_RTCEx_Tamper2EventCallback(hrtc);
-
- /* Clear the Tamper interrupt pending bit */
- __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F);
- }
- }
- /* Clear the EXTI's Flag for RTC TimeStamp and Tamper */
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG();
-
- /* Change RTC state */
- hrtc->State = HAL_RTC_STATE_READY;
-}
-
-/**
- * @brief TimeStamp callback.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval None
- */
-__weak void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_RTC_TimeStampEventCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Tamper 1 callback.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval None
- */
-__weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_RTC_Tamper1EventCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Tamper 2 callback.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval None
- */
-__weak void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_RTC_Tamper2EventCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief This function handles TimeStamp polling request.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) == RESET)
- {
- if(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSOVF) != RESET)
- {
- /* Clear the TIMESTAMP Overrun Flag */
- __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF);
-
- /* Change TIMESTAMP state */
- hrtc->State = HAL_RTC_STATE_ERROR;
-
- return HAL_ERROR;
- }
-
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- hrtc->State = HAL_RTC_STATE_TIMEOUT;
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Change RTC state */
- hrtc->State = HAL_RTC_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief This function handles Tamper1 Polling.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Get the status of the Interrupt */
- while(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP1F)== RESET)
- {
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- hrtc->State = HAL_RTC_STATE_TIMEOUT;
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Clear the Tamper Flag */
- __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP1F);
-
- /* Change RTC state */
- hrtc->State = HAL_RTC_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief This function handles Tamper2 Polling.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Get the status of the Interrupt */
- while(__HAL_RTC_TAMPER_GET_FLAG(hrtc, RTC_FLAG_TAMP2F) == RESET)
- {
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- hrtc->State = HAL_RTC_STATE_TIMEOUT;
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Clear the Tamper Flag */
- __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP2F);
-
- /* Change RTC state */
- hrtc->State = HAL_RTC_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup RTCEx_Exported_Functions_Group2 RTC Wake-up functions
- * @brief RTC Wake-up functions
- *
-@verbatim
- ===============================================================================
- ##### RTC Wake-up functions #####
- ===============================================================================
-
- [..] This section provides functions allowing to configure Wake-up feature
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Sets wake up timer.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param WakeUpCounter: Wake up counter
- * @param WakeUpClock: Wake up clock
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)
-{
- uint32_t tickstart = 0;
-
- /* Check the parameters */
- assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock));
- assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter));
-
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
- while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_TIMEOUT;
- }
- }
-
- /* Clear the Wake-up Timer clock source bits in CR register */
- hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL;
-
- /* Configure the clock source */
- hrtc->Instance->CR |= (uint32_t)WakeUpClock;
-
- /* Configure the Wake-up Timer counter */
- hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;
-
- /* Enable the Wake-up Timer */
- __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Sets wake up timer with interrupt
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param WakeUpCounter: Wake up counter
- * @param WakeUpClock: Wake up clock
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock)
-{
- uint32_t tickstart = 0;
-
- /* Check the parameters */
- assert_param(IS_RTC_WAKEUP_CLOCK(WakeUpClock));
- assert_param(IS_RTC_WAKEUP_COUNTER(WakeUpCounter));
-
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
- while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_TIMEOUT;
- }
- }
-
- /* Configure the Wake-up Timer counter */
- hrtc->Instance->WUTR = (uint32_t)WakeUpCounter;
-
- /* Clear the Wake-up Timer clock source bits in CR register */
- hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL;
-
- /* Configure the clock source */
- hrtc->Instance->CR |= (uint32_t)WakeUpClock;
-
- /* RTC WakeUpTimer Interrupt Configuration: EXTI configuration */
- __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT();
-
- EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT;
-
- /* Configure the Interrupt in the RTC_CR register */
- __HAL_RTC_WAKEUPTIMER_ENABLE_IT(hrtc,RTC_IT_WUT);
-
- /* Enable the Wake-up Timer */
- __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc);
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Deactivates wake up timer counter.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval HAL status
- */
-uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc)
-{
- uint32_t tickstart = 0;
-
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- /* Disable the Wake-up Timer */
- __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc);
-
- /* In case of interrupt mode is used, the interrupt source must disabled */
- __HAL_RTC_WAKEUPTIMER_DISABLE_IT(hrtc,RTC_IT_WUT);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait till RTC WUTWF flag is set and if Time out is reached exit */
- while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET)
- {
- if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_TIMEOUT;
- }
- }
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Gets wake up timer counter.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval Counter value
- */
-uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc)
-{
- /* Get the counter value */
- return ((uint32_t)(hrtc->Instance->WUTR & RTC_WUTR_WUT));
-}
-
-/**
- * @brief This function handles Wake Up Timer interrupt request.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval None
- */
-void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc)
-{
- if(__HAL_RTC_WAKEUPTIMER_GET_IT(hrtc, RTC_IT_WUT))
- {
- /* Get the status of the Interrupt */
- if((uint32_t)(hrtc->Instance->CR & RTC_IT_WUT) != (uint32_t)RESET)
- {
- /* WAKEUPTIMER callback */
- HAL_RTCEx_WakeUpTimerEventCallback(hrtc);
-
- /* Clear the WAKEUPTIMER interrupt pending bit */
- __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
- }
- }
-
- /* Clear the EXTI's line Flag for RTC WakeUpTimer */
- __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG();
-
- /* Change RTC state */
- hrtc->State = HAL_RTC_STATE_READY;
-}
-
-/**
- * @brief Wake Up Timer callback.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval None
- */
-__weak void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_RTC_WakeUpTimerEventCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief This function handles Wake Up Timer Polling.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) == RESET)
- {
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Clear the WAKEUPTIMER Flag */
- __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF);
-
- /* Change RTC state */
- hrtc->State = HAL_RTC_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-
-/** @defgroup RTCEx_Exported_Functions_Group3 Extension Peripheral Control functions
- * @brief Extension Peripheral Control functions
- *
-@verbatim
- ===============================================================================
- ##### Extension Peripheral Control functions #####
- ===============================================================================
- [..]
- This subsection provides functions allowing to
- (+) Write a data in a specified RTC Backup data register
- (+) Read a data in a specified RTC Backup data register
- (+) Set the Coarse calibration parameters.
- (+) Deactivate the Coarse calibration parameters
- (+) Set the Smooth calibration parameters.
- (+) Configure the Synchronization Shift Control Settings.
- (+) Configure the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
- (+) Deactivate the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
- (+) Enable the RTC reference clock detection.
- (+) Disable the RTC reference clock detection.
- (+) Enable the Bypass Shadow feature.
- (+) Disable the Bypass Shadow feature.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Writes a data in a specified RTC Backup data register.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param BackupRegister: RTC Backup data Register number.
- * This parameter can be: RTC_BKP_DRx where x can be from 0 to 19 to
- * specify the register.
- * @param Data: Data to be written in the specified RTC Backup data register.
- * @retval None
- */
-void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data)
-{
- uint32_t tmp = 0;
-
- /* Check the parameters */
- assert_param(IS_RTC_BKP(BackupRegister));
-
- tmp = (uint32_t)&(hrtc->Instance->BKP0R);
- tmp += (BackupRegister * 4);
-
- /* Write the specified register */
- *(__IO uint32_t *)tmp = (uint32_t)Data;
-}
-
-/**
- * @brief Reads data from the specified RTC Backup data Register.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param BackupRegister: RTC Backup data Register number.
- * This parameter can be: RTC_BKP_DRx where x can be from 0 to 19 to
- * specify the register.
- * @retval Read value
- */
-uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister)
-{
- uint32_t tmp = 0;
-
- /* Check the parameters */
- assert_param(IS_RTC_BKP(BackupRegister));
-
- tmp = (uint32_t)&(hrtc->Instance->BKP0R);
- tmp += (BackupRegister * 4);
-
- /* Read the specified register */
- return (*(__IO uint32_t *)tmp);
-}
-
-/**
- * @brief Sets the Coarse calibration parameters.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param CalibSign: Specifies the sign of the coarse calibration value.
- * This parameter can be one of the following values :
- * @arg RTC_CALIBSIGN_POSITIVE: The value sign is positive
- * @arg RTC_CALIBSIGN_NEGATIVE: The value sign is negative
- * @param Value: value of coarse calibration expressed in ppm (coded on 5 bits).
- *
- * @note This Calibration value should be between 0 and 63 when using negative
- * sign with a 2-ppm step.
- *
- * @note This Calibration value should be between 0 and 126 when using positive
- * sign with a 4-ppm step.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef* hrtc, uint32_t CalibSign, uint32_t Value)
-{
- /* Check the parameters */
- assert_param(IS_RTC_CALIB_SIGN(CalibSign));
- assert_param(IS_RTC_CALIB_VALUE(Value));
-
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- /* Set Initialization mode */
- if(RTC_EnterInitMode(hrtc) != HAL_OK)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Set RTC state*/
- hrtc->State = HAL_RTC_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_ERROR;
- }
- else
- {
- /* Enable the Coarse Calibration */
- __HAL_RTC_COARSE_CALIB_ENABLE(hrtc);
-
- /* Set the coarse calibration value */
- hrtc->Instance->CALIBR = (uint32_t)(CalibSign|Value);
-
- /* Exit Initialization mode */
- hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
- }
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Change state */
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Deactivates the Coarse calibration parameters.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef* hrtc)
-{
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- /* Set Initialization mode */
- if(RTC_EnterInitMode(hrtc) != HAL_OK)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Set RTC state*/
- hrtc->State = HAL_RTC_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_ERROR;
- }
- else
- {
- /* Enable the Coarse Calibration */
- __HAL_RTC_COARSE_CALIB_DISABLE(hrtc);
-
- /* Exit Initialization mode */
- hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
- }
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Change state */
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Sets the Smooth calibration parameters.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param SmoothCalibPeriod: Select the Smooth Calibration Period.
- * This parameter can be can be one of the following values :
- * @arg RTC_SMOOTHCALIB_PERIOD_32SEC: The smooth calibration period is 32s.
- * @arg RTC_SMOOTHCALIB_PERIOD_16SEC: The smooth calibration period is 16s.
- * @arg RTC_SMOOTHCALIB_PERIOD_8SEC: The smooth calibration period is 8s.
- * @param SmoothCalibPlusPulses: Select to Set or reset the CALP bit.
- * This parameter can be one of the following values:
- * @arg RTC_SMOOTHCALIB_PLUSPULSES_SET: Add one RTCCLK pulse every 2*11 pulses.
- * @arg RTC_SMOOTHCALIB_PLUSPULSES_RESET: No RTCCLK pulses are added.
- * @param SmouthCalibMinusPulsesValue: Select the value of CALM[8:0] bits.
- * This parameter can be one any value from 0 to 0x000001FF.
- * @note To deactivate the smooth calibration, the field SmoothCalibPlusPulses
- * must be equal to SMOOTHCALIB_PLUSPULSES_RESET and the field
- * SmouthCalibMinusPulsesValue must be equal to 0.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef* hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue)
-{
- uint32_t tickstart = 0;
-
- /* Check the parameters */
- assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(SmoothCalibPeriod));
- assert_param(IS_RTC_SMOOTH_CALIB_PLUS(SmoothCalibPlusPulses));
- assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmouthCalibMinusPulsesValue));
-
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- /* check if a calibration is pending*/
- if((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET)
- {
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* check if a calibration is pending*/
- while((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Change RTC state */
- hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Configure the Smooth calibration settings */
- hrtc->Instance->CALR = (uint32_t)((uint32_t)SmoothCalibPeriod | (uint32_t)SmoothCalibPlusPulses | (uint32_t)SmouthCalibMinusPulsesValue);
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Change RTC state */
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Configures the Synchronization Shift Control Settings.
- * @note When REFCKON is set, firmware must not write to Shift control register.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param ShiftAdd1S: Select to add or not 1 second to the time calendar.
- * This parameter can be one of the following values :
- * @arg RTC_SHIFTADD1S_SET: Add one second to the clock calendar.
- * @arg RTC_SHIFTADD1S_RESET: No effect.
- * @param ShiftSubFS: Select the number of Second Fractions to substitute.
- * This parameter can be one any value from 0 to 0x7FFF.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef* hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS)
-{
- uint32_t tickstart = 0;
-
- /* Check the parameters */
- assert_param(IS_RTC_SHIFT_ADD1S(ShiftAdd1S));
- assert_param(IS_RTC_SHIFT_SUBFS(ShiftSubFS));
-
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait until the shift is completed*/
- while((hrtc->Instance->ISR & RTC_ISR_SHPF) != RESET)
- {
- if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_TIMEOUT;
- }
- }
-
- /* Check if the reference clock detection is disabled */
- if((hrtc->Instance->CR & RTC_CR_REFCKON) == RESET)
- {
- /* Configure the Shift settings */
- hrtc->Instance->SHIFTR = (uint32_t)(uint32_t)(ShiftSubFS) | (uint32_t)(ShiftAdd1S);
-
- /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */
- if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET)
- {
- if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- hrtc->State = HAL_RTC_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_ERROR;
- }
- }
- }
- else
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Change RTC state */
- hrtc->State = HAL_RTC_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_ERROR;
- }
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Change RTC state */
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Configures the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param CalibOutput: Select the Calibration output Selection .
- * This parameter can be one of the following values:
- * @arg RTC_CALIBOUTPUT_512HZ: A signal has a regular waveform at 512Hz.
- * @arg RTC_CALIBOUTPUT_1HZ: A signal has a regular waveform at 1Hz.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef* hrtc, uint32_t CalibOutput)
-{
- /* Check the parameters */
- assert_param(IS_RTC_CALIB_OUTPUT(CalibOutput));
-
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- /* Clear flags before config */
- hrtc->Instance->CR &= (uint32_t)~RTC_CR_COSEL;
-
- /* Configure the RTC_CR register */
- hrtc->Instance->CR |= (uint32_t)CalibOutput;
-
- __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(hrtc);
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Change RTC state */
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Deactivates the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz).
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef* hrtc)
-{
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(hrtc);
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Change RTC state */
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Enables the RTC reference clock detection.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef* hrtc)
-{
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- /* Set Initialization mode */
- if(RTC_EnterInitMode(hrtc) != HAL_OK)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Set RTC state*/
- hrtc->State = HAL_RTC_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_ERROR;
- }
- else
- {
- __HAL_RTC_CLOCKREF_DETECTION_ENABLE(hrtc);
-
- /* Exit Initialization mode */
- hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
- }
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Change RTC state */
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Disable the RTC reference clock detection.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef* hrtc)
-{
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- /* Set Initialization mode */
- if(RTC_EnterInitMode(hrtc) != HAL_OK)
- {
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Set RTC state*/
- hrtc->State = HAL_RTC_STATE_ERROR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_ERROR;
- }
- else
- {
- __HAL_RTC_CLOCKREF_DETECTION_DISABLE(hrtc);
-
- /* Exit Initialization mode */
- hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT;
- }
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Change RTC state */
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Enables the Bypass Shadow feature.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @note When the Bypass Shadow is enabled the calendar value are taken
- * directly from the Calendar counter.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef* hrtc)
-{
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- /* Set the BYPSHAD bit */
- hrtc->Instance->CR |= (uint8_t)RTC_CR_BYPSHAD;
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Change RTC state */
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @brief Disables the Bypass Shadow feature.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @note When the Bypass Shadow is enabled the calendar value are taken
- * directly from the Calendar counter.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef* hrtc)
-{
- /* Process Locked */
- __HAL_LOCK(hrtc);
-
- hrtc->State = HAL_RTC_STATE_BUSY;
-
- /* Disable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc);
-
- /* Reset the BYPSHAD bit */
- hrtc->Instance->CR &= (uint8_t)~RTC_CR_BYPSHAD;
-
- /* Enable the write protection for RTC registers */
- __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc);
-
- /* Change RTC state */
- hrtc->State = HAL_RTC_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hrtc);
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
- /** @defgroup RTCEx_Exported_Functions_Group4 Extended features functions
- * @brief Extended features functions
- *
-@verbatim
- ===============================================================================
- ##### Extended features functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
- (+) RTC Alarm B callback
- (+) RTC Poll for Alarm B request
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Alarm B callback.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @retval None
- */
-__weak void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_RTC_AlarmBEventCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief This function handles AlarmB Polling request.
- * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains
- * the configuration information for RTC.
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBF) == RESET)
- {
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- hrtc->State = HAL_RTC_STATE_TIMEOUT;
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Clear the Alarm Flag */
- __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF);
-
- /* Change RTC state */
- hrtc->State = HAL_RTC_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_RTC_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai.c
deleted file mode 100644
index 1b18728..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai.c
+++ /dev/null
@@ -1,1908 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_sai.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief SAI HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Serial Audio Interface (SAI) peripheral:
- * + Initialization/de-initialization functions
- * + I/O operation functions
- * + Peripheral Control functions
- * + Peripheral State functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
-
- [..]
- The SAI HAL driver can be used as follows:
-
- (#) Declare a SAI_HandleTypeDef handle structure.
- (#) Initialize the SAI low level resources by implementing the HAL_SAI_MspInit() API:
- (##) Enable the SAI interface clock.
- (##) SAI pins configuration:
- (+++) Enable the clock for the SAI GPIOs.
- (+++) Configure these SAI pins as alternate function pull-up.
- (##) NVIC configuration if you need to use interrupt process (HAL_SAI_Transmit_IT()
- and HAL_SAI_Receive_IT() APIs):
- (+++) Configure the SAI interrupt priority.
- (+++) Enable the NVIC SAI IRQ handle.
-
- (##) DMA Configuration if you need to use DMA process (HAL_SAI_Transmit_DMA()
- and HAL_SAI_Receive_DMA() APIs):
- (+++) Declare a DMA handle structure for the Tx/Rx stream.
- (+++) Enable the DMAx interface clock.
- (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
- (+++) Configure the DMA Tx/Rx Stream.
- (+++) Associate the initialized DMA handle to the SAI DMA Tx/Rx handle.
- (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the
- DMA Tx/Rx Stream.
-
- (#) Program the SAI Mode, Standard, Data Format, MCLK Output, Audio frequency and Polarity
- using HAL_SAI_Init() function.
-
- -@- The specific SAI interrupts (FIFO request and Overrun underrun interrupt)
- will be managed using the macros __SAI_ENABLE_IT() and __SAI_DISABLE_IT()
- inside the transmit and receive process.
-
- [..]
- (@) SAI Clock Source configuration is managed differently depending on the selected
- STM32F4 devices :
- (+@) For STM32F446xx devices, the configuration is managed through RCCEx_PeriphCLKConfig()
- function in the HAL RCC drivers
- (+@) For STM32F439xx/STM32F437xx/STM32F429xx/STM32F427xx devices, the configuration
- is managed within HAL SAI drivers through HAL_SAI_Init() function using
- ClockSource field of SAI_InitTypeDef structure.
- [..]
- (@) Make sure that either:
- (+@) I2S PLL is configured or
- (+@) SAI PLL is configured or
- (+@) External clock source is configured after setting correctly
- the define constant EXTERNAL_CLOCK_VALUE in the stm32f4xx_hal_conf.h file.
-
- [..]
- (@) In master Tx mode: enabling the audio block immediately generates the bit clock
- for the external slaves even if there is no data in the FIFO, However FS signal
- generation is conditioned by the presence of data in the FIFO.
-
- [..]
- (@) In master Rx mode: enabling the audio block immediately generates the bit clock
- and FS signal for the external slaves.
-
- [..]
- (@) It is mandatory to respect the following conditions in order to avoid bad SAI behavior:
- (+@) First bit Offset <= (SLOT size - Data size)
- (+@) Data size <= SLOT size
- (+@) Number of SLOT x SLOT size = Frame length
- (+@) The number of slots should be even when SAI_FS_CHANNEL_IDENTIFICATION is selected.
-
- [..]
- Three operation modes are available within this driver :
-
- *** Polling mode IO operation ***
- =================================
- [..]
- (+) Send an amount of data in blocking mode using HAL_SAI_Transmit()
- (+) Receive an amount of data in blocking mode using HAL_SAI_Receive()
-
- *** Interrupt mode IO operation ***
- ===================================
- [..]
- (+) Send an amount of data in non blocking mode using HAL_SAI_Transmit_IT()
- (+) At transmission end of transfer HAL_SAI_TxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_SAI_TxCpltCallback
- (+) Receive an amount of data in non blocking mode using HAL_SAI_Receive_IT()
- (+) At reception end of transfer HAL_SAI_RxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_SAI_RxCpltCallback
- (+) In case of transfer Error, HAL_SAI_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_SAI_ErrorCallback
-
- *** DMA mode IO operation ***
- ==============================
- [..]
- (+) Send an amount of data in non blocking mode (DMA) using HAL_SAI_Transmit_DMA()
- (+) At transmission end of transfer HAL_SAI_TxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_SAI_TxCpltCallback
- (+) Receive an amount of data in non blocking mode (DMA) using HAL_SAI_Receive_DMA()
- (+) At reception end of transfer HAL_SAI_RxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_SAI_RxCpltCallback
- (+) In case of transfer Error, HAL_SAI_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_SAI_ErrorCallback
- (+) Pause the DMA Transfer using HAL_SAI_DMAPause()
- (+) Resume the DMA Transfer using HAL_SAI_DMAResume()
- (+) Stop the DMA Transfer using HAL_SAI_DMAStop()
-
- *** SAI HAL driver macros list ***
- =============================================
- [..]
- Below the list of most used macros in USART HAL driver :
-
- (+) __HAL_SAI_ENABLE: Enable the SAI peripheral
- (+) __HAL_SAI_DISABLE: Disable the SAI peripheral
- (+) __HAL_SAI_ENABLE_IT : Enable the specified SAI interrupts
- (+) __HAL_SAI_DISABLE_IT : Disable the specified SAI interrupts
- (+) __HAL_SAI_GET_IT_SOURCE: Check if the specified SAI interrupt source is
- enabled or disabled
- (+) __HAL_SAI_GET_FLAG: Check whether the specified SAI flag is set or not
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup SAI SAI
- * @brief SAI HAL module driver
- * @{
- */
-
-#ifdef HAL_SAI_MODULE_ENABLED
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
-
-/* Private typedef -----------------------------------------------------------*/
-/** @defgroup SAI_Private_Typedefs SAI Private Typedefs
- * @{
- */
-typedef enum {
- SAI_MODE_DMA,
- SAI_MODE_IT
-}SAI_ModeTypedef;
-/**
- * @}
- */
-/* Private define ------------------------------------------------------------*/
-/** @defgroup SAI_Private_Constants SAI Private Constants
- * @{
- */
-#define SAI_FIFO_SIZE 8
-#define SAI_DEFAULT_TIMEOUT 4
-/**
- * @}
- */
-
-/* SAI registers Masks */
-#define CR1_CLEAR_MASK ((uint32_t)0xFF04C010)
-#define FRCR_CLEAR_MASK ((uint32_t)0xFFF88000)
-#define SLOTR_CLEAR_MASK ((uint32_t)0x0000F020)
-
-#define SAI_TIMEOUT_VALUE 10
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-static void SAI_FillFifo(SAI_HandleTypeDef *hsai);
-static uint32_t SAI_InterruptFlag(SAI_HandleTypeDef *hsai, uint32_t mode);
-static HAL_StatusTypeDef SAI_InitI2S(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot);
-static HAL_StatusTypeDef SAI_InitPCM(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot);
-
-static HAL_StatusTypeDef SAI_Disable(SAI_HandleTypeDef *hsai);
-static void SAI_Transmit_IT8Bit(SAI_HandleTypeDef *hsai);
-static void SAI_Transmit_IT16Bit(SAI_HandleTypeDef *hsai);
-static void SAI_Transmit_IT32Bit(SAI_HandleTypeDef *hsai);
-static void SAI_Receive_IT8Bit(SAI_HandleTypeDef *hsai);
-static void SAI_Receive_IT16Bit(SAI_HandleTypeDef *hsai);
-static void SAI_Receive_IT32Bit(SAI_HandleTypeDef *hsai);
-
-static void SAI_DMATxCplt(DMA_HandleTypeDef *hdma);
-static void SAI_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
-static void SAI_DMARxCplt(DMA_HandleTypeDef *hdma);
-static void SAI_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
-static void SAI_DMAError(DMA_HandleTypeDef *hdma);
-
-/* Exported functions ---------------------------------------------------------*/
-
-/** @defgroup SAI_Exported_Functions SAI Exported Functions
- * @{
- */
-
-/** @defgroup SAI_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..] This subsection provides a set of functions allowing to initialize and
- de-initialize the SAIx peripheral:
-
- (+) User must implement HAL_SAI_MspInit() function in which he configures
- all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
-
- (+) Call the function HAL_SAI_Init() to configure the selected device with
- the selected configuration:
- (++) Mode (Master/slave TX/RX)
- (++) Protocol
- (++) Data Size
- (++) MCLK Output
- (++) Audio frequency
- (++) FIFO Threshold
- (++) Frame Config
- (++) Slot Config
-
- (+) Call the function HAL_SAI_DeInit() to restore the default configuration
- of the selected SAI peripheral.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the structure FrameInit, SlotInit and the low part of
- * Init according to the specified parameters and call the function
- * HAL_SAI_Init to initialize the SAI block.
- * @param hsai : pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @param protocol : one of the supported protocol @ref SAI_Protocol
- * @param datasize : one of the supported datasize @ref SAI_Protocol_DataSize
- * the configuration information for SAI module.
- * @param nbslot : Number of slot.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SAI_InitProtocol(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot)
-{
- HAL_StatusTypeDef status = HAL_OK;
-
- /* Check the parameters */
- assert_param(IS_SAI_SUPPORTED_PROTOCOL(protocol));
- assert_param(IS_SAI_PROTOCOL_DATASIZE(datasize));
-
- switch(protocol)
- {
- case SAI_I2S_STANDARD :
- case SAI_I2S_MSBJUSTIFIED :
- case SAI_I2S_LSBJUSTIFIED :
- status = SAI_InitI2S(hsai, protocol, datasize, nbslot);
- break;
- case SAI_PCM_LONG :
- case SAI_PCM_SHORT :
- status = SAI_InitPCM(hsai, protocol, datasize, nbslot);
- break;
- default :
- status = HAL_ERROR;
- break;
- }
-
- if(status == HAL_OK)
- {
- status = HAL_SAI_Init(hsai);
- }
-
- return status;
-}
-
-/**
- * @brief Initializes the SAI according to the specified parameters
- * in the SAI_InitTypeDef and create the associated handle.
- * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai)
-{
- uint32_t tmpclock = 0;
-
- /* This variable used to store the SAI_CK_x (value in Hz) */
- uint32_t freq = 0;
-
- /* Check the SAI handle allocation */
- if(hsai == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the SAI Block parameters */
- assert_param(IS_SAI_AUDIO_FREQUENCY(hsai->Init.AudioFrequency));
- assert_param(IS_SAI_BLOCK_PROTOCOL(hsai->Init.Protocol));
- assert_param(IS_SAI_BLOCK_MODE(hsai->Init.AudioMode));
- assert_param(IS_SAI_BLOCK_SYNCEXT(hsai->Init.SynchroExt));
- assert_param(IS_SAI_BLOCK_DATASIZE(hsai->Init.DataSize));
- assert_param(IS_SAI_BLOCK_FIRST_BIT(hsai->Init.FirstBit));
- assert_param(IS_SAI_BLOCK_CLOCK_STROBING(hsai->Init.ClockStrobing));
- assert_param(IS_SAI_BLOCK_SYNCHRO(hsai->Init.Synchro));
- assert_param(IS_SAI_BLOCK_OUTPUT_DRIVE(hsai->Init.OutputDrive));
- assert_param(IS_SAI_BLOCK_NODIVIDER(hsai->Init.NoDivider));
- assert_param(IS_SAI_BLOCK_FIFO_THRESHOLD(hsai->Init.FIFOThreshold));
- assert_param(IS_SAI_MONO_STEREO_MODE(hsai->Init.MonoStereoMode));
- assert_param(IS_SAI_BLOCK_COMPANDING_MODE(hsai->Init.CompandingMode));
- assert_param(IS_SAI_BLOCK_TRISTATE_MANAGEMENT(hsai->Init.TriState));
-
- /* Check the SAI Block Frame parameters */
- assert_param(IS_SAI_BLOCK_FRAME_LENGTH(hsai->FrameInit.FrameLength));
- assert_param(IS_SAI_BLOCK_ACTIVE_FRAME(hsai->FrameInit.ActiveFrameLength));
- assert_param(IS_SAI_BLOCK_FS_DEFINITION(hsai->FrameInit.FSDefinition));
- assert_param(IS_SAI_BLOCK_FS_POLARITY(hsai->FrameInit.FSPolarity));
- assert_param(IS_SAI_BLOCK_FS_OFFSET(hsai->FrameInit.FSOffset));
-
- /* Check the SAI Block Slot parameters */
- assert_param(IS_SAI_BLOCK_FIRSTBIT_OFFSET(hsai->SlotInit.FirstBitOffset));
- assert_param(IS_SAI_BLOCK_SLOT_SIZE(hsai->SlotInit.SlotSize));
- assert_param(IS_SAI_BLOCK_SLOT_NUMBER(hsai->SlotInit.SlotNumber));
- assert_param(IS_SAI_SLOT_ACTIVE(hsai->SlotInit.SlotActive));
-
- if(hsai->State == HAL_SAI_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hsai->Lock = HAL_UNLOCKED;
-
- /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
- HAL_SAI_MspInit(hsai);
- }
-
- hsai->State = HAL_SAI_STATE_BUSY;
-
- /* Disable the selected SAI peripheral */
- SAI_Disable(hsai);
-
- /* SAI Block Synchro Configuration -----------------------------------------*/
- SAI_BlockSynchroConfig(hsai);
-
- /* Configure Master Clock using the following formula :
- MCLK_x = SAI_CK_x / (MCKDIV[3:0] * 2) with MCLK_x = 256 * FS
- FS = SAI_CK_x / (MCKDIV[3:0] * 2) * 256
- MCKDIV[3:0] = SAI_CK_x / FS * 512 */
- if(hsai->Init.AudioFrequency != SAI_AUDIO_FREQUENCY_MCKDIV)
- {
- /* Get SAI clock source based on Source clock selection from RCC */
- freq = SAI_GetInputClock(hsai);
-
- /* (saiclocksource x 10) to keep Significant digits */
- tmpclock = (((freq * 10) / ((hsai->Init.AudioFrequency) * 512)));
-
- hsai->Init.Mckdiv = tmpclock / 10;
-
- /* Round result to the nearest integer */
- if((tmpclock % 10) > 8)
- {
- hsai->Init.Mckdiv+= 1;
- }
- }
-
- /* SAI Block Configuration ------------------------------------------------------------*/
- /* SAI CR1 Configuration */
- hsai->Instance->CR1&=~(SAI_xCR1_MODE | SAI_xCR1_PRTCFG | SAI_xCR1_DS | \
- SAI_xCR1_LSBFIRST | SAI_xCR1_CKSTR | SAI_xCR1_SYNCEN |\
- SAI_xCR1_MONO | SAI_xCR1_OUTDRIV | SAI_xCR1_DMAEN | \
- SAI_xCR1_NODIV | SAI_xCR1_MCKDIV);
-
- hsai->Instance->CR1|= (hsai->Init.AudioMode | hsai->Init.Protocol | \
- hsai->Init.DataSize | hsai->Init.FirstBit | \
- hsai->Init.ClockStrobing | hsai->Init.Synchro | \
- hsai->Init.MonoStereoMode | hsai->Init.OutputDrive | \
- hsai->Init.NoDivider | (hsai->Init.Mckdiv << 20) | hsai->Init.CompandingMode);
-
- /* SAI CR2 Configuration */
- hsai->Instance->CR2&= ~(SAI_xCR2_FTH | SAI_xCR2_FFLUSH | SAI_xCR2_COMP);
- hsai->Instance->CR2|= (hsai->Init.FIFOThreshold | hsai->Init.CompandingMode | hsai->Init.TriState);
-
-
- /* SAI Frame Configuration -----------------------------------------*/
- hsai->Instance->FRCR&=(~(SAI_xFRCR_FRL | SAI_xFRCR_FSALL | SAI_xFRCR_FSDEF | \
- SAI_xFRCR_FSPO | SAI_xFRCR_FSOFF));
- hsai->Instance->FRCR|=((hsai->FrameInit.FrameLength - 1) |
- hsai->FrameInit.FSOffset |
- hsai->FrameInit.FSDefinition |
- hsai->FrameInit.FSPolarity |
- ((hsai->FrameInit.ActiveFrameLength - 1) << 8));
-
- /* SAI Block_x SLOT Configuration ------------------------------------------*/
- /* This register has no meaning in AC’97 and SPDIF audio protocol */
- hsai->Instance->SLOTR&= (~(SAI_xSLOTR_FBOFF | SAI_xSLOTR_SLOTSZ | \
- SAI_xSLOTR_NBSLOT | SAI_xSLOTR_SLOTEN ));
-
- hsai->Instance->SLOTR|= hsai->SlotInit.FirstBitOffset | hsai->SlotInit.SlotSize
- | hsai->SlotInit.SlotActive | ((hsai->SlotInit.SlotNumber - 1) << 8);
-
- /* Initialise the error code */
- hsai->ErrorCode = HAL_SAI_ERROR_NONE;
-
- /* Initialize the SAI state */
- hsai->State= HAL_SAI_STATE_READY;
-
- /* Release Lock */
- __HAL_UNLOCK(hsai);
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the SAI peripheral.
- * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SAI_DeInit(SAI_HandleTypeDef *hsai)
-{
- /* Check the SAI handle allocation */
- if(hsai == NULL)
- {
- return HAL_ERROR;
- }
-
- hsai->State = HAL_SAI_STATE_BUSY;
-
- /* Disabled All interrupt and clear all the flag */
- hsai->Instance->IMR = 0;
- hsai->Instance->CLRFR = 0xFFFFFFFF;
-
- /* Disable the SAI */
- SAI_Disable(hsai);
-
- /* Flush the fifo */
- SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH);
-
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
- HAL_SAI_MspDeInit(hsai);
-
- /* Initialize the error code */
- hsai->ErrorCode = HAL_SAI_ERROR_NONE;
-
- /* Initialize the SAI state */
- hsai->State = HAL_SAI_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hsai);
-
- return HAL_OK;
-}
-
-/**
- * @brief SAI MSP Init.
- * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval None
- */
-__weak void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SAI_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief SAI MSP DeInit.
- * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval None
- */
-__weak void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SAI_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup SAI_Exported_Functions_Group2 IO operation functions
- * @brief Data transfers functions
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to manage the SAI data
- transfers.
-
- (+) There are two modes of transfer:
- (++) Blocking mode : The communication is performed in the polling mode.
- The status of all data processing is returned by the same function
- after finishing transfer.
- (++) No-Blocking mode : The communication is performed using Interrupts
- or DMA. These functions return the status of the transfer startup.
- The end of the data processing will be indicated through the
- dedicated SAI IRQ when using Interrupt mode or the DMA IRQ when
- using DMA mode.
-
- (+) Blocking mode functions are :
- (++) HAL_SAI_Transmit()
- (++) HAL_SAI_Receive()
- (++) HAL_SAI_TransmitReceive()
-
- (+) Non Blocking mode functions with Interrupt are :
- (++) HAL_SAI_Transmit_IT()
- (++) HAL_SAI_Receive_IT()
- (++) HAL_SAI_TransmitReceive_IT()
-
- (+) Non Blocking mode functions with DMA are :
- (++) HAL_SAI_Transmit_DMA()
- (++) HAL_SAI_Receive_DMA()
- (++) HAL_SAI_TransmitReceive_DMA()
-
- (+) A set of Transfer Complete Callbacks are provided in non Blocking mode:
- (++) HAL_SAI_TxCpltCallback()
- (++) HAL_SAI_RxCpltCallback()
- (++) HAL_SAI_ErrorCallback()
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Transmits an amount of data in blocking mode.
- * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SAI_Transmit(SAI_HandleTypeDef *hsai, uint8_t* pData, uint16_t Size, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(hsai->State == HAL_SAI_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hsai);
-
- hsai->State = HAL_SAI_STATE_BUSY_TX;
- hsai->ErrorCode = HAL_SAI_ERROR_NONE;
- hsai->XferSize = Size;
- hsai->XferCount = Size;
- hsai->pBuffPtr = pData;
-
- /* Check if the SAI is already enabled */
- if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != SAI_xCR1_SAIEN)
- {
- /* fill the fifo with data before to enabled the SAI */
- SAI_FillFifo(hsai);
- /* Enable SAI peripheral */
- __HAL_SAI_ENABLE(hsai);
- }
-
- while(hsai->XferCount > 0)
- {
- /* Write data if the FIFO is not full */
- if((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_FULL)
- {
- if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
- {
- hsai->Instance->DR = (*hsai->pBuffPtr++);
- }
- else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
- {
- hsai->Instance->DR = *((uint16_t *)hsai->pBuffPtr);
- hsai->pBuffPtr+= 2;
- }
- else
- {
- hsai->Instance->DR = *((uint32_t *)hsai->pBuffPtr);
- hsai->pBuffPtr+= 4;
- }
- hsai->XferCount--;
- }
- else
- {
- /* Get tick */
- tickstart = HAL_GetTick();
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Update error code */
- hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsai);
-
- /* Change the SAI state */
- hsai->State = HAL_SAI_STATE_TIMEOUT;
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
-
- hsai->State = HAL_SAI_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsai);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receives an amount of data in blocking mode.
- * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be received
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SAI_Receive(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(hsai->State == HAL_SAI_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hsai);
-
- hsai->State = HAL_SAI_STATE_BUSY_RX;
- hsai->ErrorCode = HAL_SAI_ERROR_NONE;
- hsai->pBuffPtr = pData;
- hsai->XferSize = Size;
- hsai->XferCount = Size;
-
- /* Check if the SAI is already enabled */
- if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != SAI_xCR1_SAIEN)
- {
- /* Enable SAI peripheral */
- __HAL_SAI_ENABLE(hsai);
- }
-
- /* Receive data */
- while(hsai->XferCount > 0)
- {
-
- if((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_EMPTY)
- {
- if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
- {
- (*hsai->pBuffPtr++) = hsai->Instance->DR;
- }
- else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
- {
- *((uint16_t*)hsai->pBuffPtr) = hsai->Instance->DR;
- hsai->pBuffPtr+= 2;
- }
- else
- {
- *((uint32_t*)hsai->pBuffPtr) = hsai->Instance->DR;
- hsai->pBuffPtr+= 4;
- }
- hsai->XferCount--;
- }
- else
- {
- /* Get tick */
- tickstart = HAL_GetTick();
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Update error code */
- hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsai);
-
- /* Change the SAI state */
- hsai->State = HAL_SAI_STATE_TIMEOUT;
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
-
- hsai->State = HAL_SAI_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsai);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Transmits an amount of data in no-blocking mode with Interrupt.
- * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SAI_Transmit_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size)
-{
- if(hsai->State == HAL_SAI_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- hsai->pBuffPtr = pData;
- hsai->XferSize = Size;
- hsai->XferCount = Size;
-
- /* Process Locked */
- __HAL_LOCK(hsai);
-
- hsai->State = HAL_SAI_STATE_BUSY_TX;
-
- if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
- {
- hsai->InterruptServiceRoutine = SAI_Transmit_IT8Bit;
- }
- else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
- {
- hsai->InterruptServiceRoutine = SAI_Transmit_IT16Bit;
- }
- else
- {
- hsai->InterruptServiceRoutine = SAI_Transmit_IT32Bit;
- }
-
- /* Enable FRQ and OVRUDR interrupts */
- __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
-
- /* Check if the SAI is already enabled */
- if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != SAI_xCR1_SAIEN)
- {
- /* Fill the fifo before starting the communication */
- SAI_FillFifo(hsai);
-
- /* Enable SAI peripheral */
- __HAL_SAI_ENABLE(hsai);
- }
- /* Process Unlocked */
- __HAL_UNLOCK(hsai);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receives an amount of data in no-blocking mode with Interrupt.
- * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be received
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SAI_Receive_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size)
-{
-
- if(hsai->State == HAL_SAI_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- hsai->pBuffPtr = pData;
- hsai->XferSize = Size;
- hsai->XferCount = Size;
-
- /* Process Locked */
- __HAL_LOCK(hsai);
-
- hsai->State = HAL_SAI_STATE_BUSY_RX;
-
- if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
- {
- hsai->InterruptServiceRoutine = SAI_Receive_IT8Bit;
- }
- else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
- {
- hsai->InterruptServiceRoutine = SAI_Receive_IT16Bit;
- }
- else
- {
- hsai->InterruptServiceRoutine = SAI_Receive_IT32Bit;
- }
- /* Enable TXE and OVRUDR interrupts */
- __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
-
- /* Check if the SAI is already enabled */
- if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != SAI_xCR1_SAIEN)
- {
- /* Enable SAI peripheral */
- __HAL_SAI_ENABLE(hsai);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsai);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Pauses the audio stream playing from the Media.
- * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SAI_DMAPause(SAI_HandleTypeDef *hsai)
-{
- /* Process Locked */
- __HAL_LOCK(hsai);
-
- /* Pause the audio file playing by disabling the SAI DMA requests */
- hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsai);
-
- return HAL_OK;
-}
-
-/**
- * @brief Resumes the audio stream playing from the Media.
- * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SAI_DMAResume(SAI_HandleTypeDef *hsai)
-{
- /* Process Locked */
- __HAL_LOCK(hsai);
-
- /* Enable the SAI DMA requests */
- hsai->Instance->CR1 |= SAI_xCR1_DMAEN;
-
- /* If the SAI peripheral is still not enabled, enable it */
- if ((hsai->Instance->CR1 & SAI_xCR1_SAIEN) == RESET)
- {
- /* Enable SAI peripheral */
- __HAL_SAI_ENABLE(hsai);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsai);
-
- return HAL_OK;
-}
-
-/**
- * @brief Stops the audio stream playing from the Media.
- * @param hsai : pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SAI_DMAStop(SAI_HandleTypeDef *hsai)
-{
- /* Process Locked */
- __HAL_LOCK(hsai);
-
- /* Disable the SAI DMA request */
- hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN;
-
- /* Abort the SAI DMA Tx Stream */
- if(hsai->hdmatx != NULL)
- {
- HAL_DMA_Abort(hsai->hdmatx);
- }
- /* Abort the SAI DMA Rx Stream */
- if(hsai->hdmarx != NULL)
- {
- HAL_DMA_Abort(hsai->hdmarx);
- }
-
- /* Disable SAI peripheral */
- SAI_Disable(hsai);
-
- hsai->State = HAL_SAI_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsai);
-
- return HAL_OK;
-}
-
-/**
- * @brief Abort the current transfer and disbaled the SAI.
- * @param hsai : pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SAI_Abort(SAI_HandleTypeDef *hsai)
-{
- /* Disable the SAI DMA request */
- hsai->Instance->CR1 &= ~SAI_xCR1_DMAEN;
-
- /* Abort the SAI DMA Tx Stream */
- if(hsai->hdmatx != NULL)
- {
- HAL_DMA_Abort(hsai->hdmatx);
- }
- /* Abort the SAI DMA Rx Stream */
- if(hsai->hdmarx != NULL)
- {
- HAL_DMA_Abort(hsai->hdmarx);
- }
-
- /* Disabled All interrupt and clear all the flag */
- hsai->Instance->IMR = 0;
- hsai->Instance->CLRFR = 0xFFFFFFFF;
-
- /* Disable SAI peripheral */
- SAI_Disable(hsai);
-
- /* Flush the fifo */
- SET_BIT(hsai->Instance->CR2, SAI_xCR2_FFLUSH);
-
- hsai->State = HAL_SAI_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsai);
-
- return HAL_OK;
-}
-
-/**
- * @brief Transmits an amount of data in no-blocking mode with DMA.
- * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SAI_Transmit_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size)
-{
- uint32_t *tmp;
-
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(hsai->State == HAL_SAI_STATE_READY)
- {
- hsai->pBuffPtr = pData;
- hsai->XferSize = Size;
- hsai->XferCount = Size;
-
- /* Process Locked */
- __HAL_LOCK(hsai);
-
- hsai->State = HAL_SAI_STATE_BUSY_TX;
-
- /* Set the SAI Tx DMA Half transfer complete callback */
- hsai->hdmatx->XferHalfCpltCallback = SAI_DMATxHalfCplt;
-
- /* Set the SAI TxDMA transfer complete callback */
- hsai->hdmatx->XferCpltCallback = SAI_DMATxCplt;
-
- /* Set the DMA error callback */
- hsai->hdmatx->XferErrorCallback = SAI_DMAError;
-
- /* Enable the Tx DMA Stream */
- tmp = (uint32_t*)&pData;
- HAL_DMA_Start_IT(hsai->hdmatx, *(uint32_t*)tmp, (uint32_t)&hsai->Instance->DR, hsai->XferSize);
-
- /* Check if the SAI is already enabled */
- if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != SAI_xCR1_SAIEN)
- {
- /* Enable SAI peripheral */
- __HAL_SAI_ENABLE(hsai);
- }
-
- /* Enable the interrupts for error handling */
- __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA));
-
- /* Enable SAI Tx DMA Request */
- hsai->Instance->CR1 |= SAI_xCR1_DMAEN;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsai);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receives an amount of data in no-blocking mode with DMA.
- * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be received
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size)
-{
- uint32_t *tmp;
-
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(hsai->State == HAL_SAI_STATE_READY)
- {
- hsai->pBuffPtr = pData;
- hsai->XferSize = Size;
- hsai->XferCount = Size;
-
- /* Process Locked */
- __HAL_LOCK(hsai);
-
- hsai->State = HAL_SAI_STATE_BUSY_RX;
-
- /* Set the SAI Rx DMA Half transfer complete callback */
- hsai->hdmarx->XferHalfCpltCallback = SAI_DMARxHalfCplt;
-
- /* Set the SAI Rx DMA transfer complete callback */
- hsai->hdmarx->XferCpltCallback = SAI_DMARxCplt;
-
- /* Set the DMA error callback */
- hsai->hdmarx->XferErrorCallback = SAI_DMAError;
-
- /* Enable the Rx DMA Stream */
- tmp = (uint32_t*)&pData;
- HAL_DMA_Start_IT(hsai->hdmarx, (uint32_t)&hsai->Instance->DR, *(uint32_t*)tmp, hsai->XferSize);
-
- /* Check if the SAI is already enabled */
- if((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != SAI_xCR1_SAIEN)
- {
- /* Enable SAI peripheral */
- __HAL_SAI_ENABLE(hsai);
- }
-
- /* Enable the interrupts for error handling */
- __HAL_SAI_ENABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA));
-
- /* Enable SAI Rx DMA Request */
- hsai->Instance->CR1 |= SAI_xCR1_DMAEN;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsai);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Enable the tx mute mode.
- * @param hsai : pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @param val : value sent during the mute @ref SAI_Block_Mute_Value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SAI_EnableTxMuteMode(SAI_HandleTypeDef *hsai, uint16_t val)
-{
- assert_param(IS_SAI_BLOCK_MUTE_VALUE(val));
-
- if(hsai->State != HAL_SAI_STATE_RESET)
- {
- CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTEVAL | SAI_xCR2_MUTE);
- SET_BIT(hsai->Instance->CR2, SAI_xCR2_MUTE | val);
- return HAL_OK;
- }
- return HAL_ERROR;
-}
-
-/**
- * @brief Disable the tx mute mode.
- * @param hsai : pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SAI_DisableTxMuteMode(SAI_HandleTypeDef *hsai)
-{
- if(hsai->State != HAL_SAI_STATE_RESET)
- {
- CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTEVAL | SAI_xCR2_MUTE);
- return HAL_OK;
- }
- return HAL_ERROR;
-}
-
-/**
- * @brief Enable the rx mute detection.
- * @param hsai : pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @param callback : function called when the mute is detected
- * @param counter : number a data before mute detection max 63.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SAI_EnableRxMuteMode(SAI_HandleTypeDef *hsai, SAIcallback callback, uint16_t counter)
-{
- assert_param(IS_SAI_BLOCK_MUTE_COUNTER(counter));
-
- if(hsai->State != HAL_SAI_STATE_RESET)
- {
- /* set the mute counter */
- CLEAR_BIT(hsai->Instance->CR2, SAI_xCR2_MUTECNT);
- SET_BIT(hsai->Instance->CR2, (uint32_t)((uint32_t)counter << 6));
- hsai->mutecallback = callback;
- /* enable the IT interrupt */
- __HAL_SAI_ENABLE_IT(hsai, SAI_IT_MUTEDET);
- return HAL_OK;
- }
- return HAL_ERROR;
-}
-
-/**
- * @brief Disable the rx mute detection.
- * @param hsai : pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SAI_DisableRxMuteMode(SAI_HandleTypeDef *hsai)
-{
- if(hsai->State != HAL_SAI_STATE_RESET)
- {
- /* set the mutecallback to NULL */
- hsai->mutecallback = (SAIcallback)NULL;
- /* enable the IT interrupt */
- __HAL_SAI_DISABLE_IT(hsai, SAI_IT_MUTEDET);
- return HAL_OK;
- }
- return HAL_ERROR;
-}
-
-/**
- * @brief This function handles SAI interrupt request.
- * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval HAL status
- */
-void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai)
-{
- if(hsai->State != HAL_SAI_STATE_RESET)
- {
- uint32_t tmpFlag = hsai->Instance->SR;
- uint32_t tmpItSource = hsai->Instance->IMR;
-
- if(((tmpFlag & SAI_xSR_FREQ) == SAI_xSR_FREQ) && ((tmpItSource & SAI_IT_FREQ) == SAI_IT_FREQ))
- {
- hsai->InterruptServiceRoutine(hsai);
- }
-
- /* check the flag only if one of them is set */
- if(tmpFlag != 0x00000000)
- {
- /* SAI Overrun error interrupt occurred ----------------------------------*/
- if(((tmpFlag & SAI_FLAG_OVRUDR) == SAI_FLAG_OVRUDR) && ((tmpItSource & SAI_IT_OVRUDR) == SAI_IT_OVRUDR))
- {
- /* Clear the SAI Overrun flag */
- __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR);
- /* Change the SAI error code */
- hsai->ErrorCode = ((hsai->State == HAL_SAI_STATE_BUSY_RX) ? HAL_SAI_ERROR_OVR : HAL_SAI_ERROR_UDR);
- /* the transfer is not stopped, we will forward the information to the user and we let the user decide what needs to be done */
- HAL_SAI_ErrorCallback(hsai);
- }
-
- /* SAI mutedet interrupt occurred ----------------------------------*/
- if(((tmpFlag & SAI_FLAG_MUTEDET) == SAI_FLAG_MUTEDET) && ((tmpItSource & SAI_IT_MUTEDET) == SAI_IT_MUTEDET))
- {
- /* Clear the SAI mutedet flag */
- __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_MUTEDET);
- /* call the call back function */
- if(hsai->mutecallback != (SAIcallback)NULL)
- {
- /* inform the user that an RX mute event has been detected */
- hsai->mutecallback();
- }
- }
-
- /* SAI AFSDET interrupt occurred ----------------------------------*/
- if(((tmpFlag & SAI_FLAG_AFSDET) == SAI_FLAG_AFSDET) && ((tmpItSource & SAI_IT_AFSDET) == SAI_IT_AFSDET))
- {
- /* Change the SAI error code */
- hsai->ErrorCode = HAL_SAI_ERROR_AFSDET;
- HAL_SAI_Abort(hsai);
- HAL_SAI_ErrorCallback(hsai);
- }
-
- /* SAI LFSDET interrupt occurred ----------------------------------*/
- if(((tmpFlag & SAI_FLAG_LFSDET) == SAI_FLAG_LFSDET) && ((tmpItSource & SAI_IT_LFSDET) == SAI_IT_LFSDET))
- {
- /* Change the SAI error code */
- hsai->ErrorCode = HAL_SAI_ERROR_LFSDET;
- HAL_SAI_Abort(hsai);
- HAL_SAI_ErrorCallback(hsai);
- }
-
- /* SAI WCKCFG interrupt occurred ----------------------------------*/
- if(((tmpFlag & SAI_FLAG_WCKCFG) == SAI_FLAG_WCKCFG) && ((tmpItSource & SAI_IT_WCKCFG) == SAI_IT_WCKCFG))
- {
- /* Change the SAI error code */
- hsai->ErrorCode = HAL_SAI_ERROR_WCKCFG;
- HAL_SAI_Abort(hsai);
- HAL_SAI_ErrorCallback(hsai);
- }
- }
- }
-}
-
-/**
- * @brief Tx Transfer completed callbacks.
- * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval None
- */
- __weak void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SAI_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Tx Transfer Half completed callbacks
- * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval None
- */
- __weak void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SAI_TxHalfCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Transfer completed callbacks.
- * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval None
- */
-__weak void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SAI_RxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Transfer half completed callbacks
- * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval None
- */
-__weak void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SAI_RxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief SAI error callbacks.
- * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval None
- */
-__weak void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SAI_ErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-
-/** @defgroup SAI_Exported_Functions_Group3 Peripheral State functions
- * @brief Peripheral State functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral State and Errors functions #####
- ===============================================================================
- [..]
- This subsection permits to get in run-time the status of the peripheral
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Returns the SAI state.
- * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval HAL state
- */
-HAL_SAI_StateTypeDef HAL_SAI_GetState(SAI_HandleTypeDef *hsai)
-{
- return hsai->State;
-}
-
-/**
-* @brief Return the SAI error code
-* @param hsai : pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for the specified SAI Block.
-* @retval SAI Error Code
-*/
-uint32_t HAL_SAI_GetError(SAI_HandleTypeDef *hsai)
-{
- return hsai->ErrorCode;
-}
-/**
- * @}
- */
-
-/**
- * @brief Initializes the SAI I2S protocol according to the specified parameters
- * in the SAI_InitTypeDef and create the associated handle.
- * @param hsai : pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @param protocol : one of the supported protocol
- * @param datasize : one of the supported datasize @ref SAI_Protocol_DataSize
- * the configuration information for SAI module.
- * @param nbslot : number of slot minimum value is 2 and max is 16.
- * the value must be a multiple of 2.
- * @retval HAL status
- */
-static HAL_StatusTypeDef SAI_InitI2S(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot)
-{
- /* Check the parameters */
- assert_param(IS_SAI_SUPPORTED_PROTOCOL(protocol));
- assert_param(IS_SAI_PROTOCOL_DATASIZE(datasize));
-
- hsai->Init.Protocol = SAI_FREE_PROTOCOL;
- hsai->Init.FirstBit = SAI_FIRSTBIT_MSB;
- hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_FALLINGEDGE;
- hsai->FrameInit.FSDefinition = SAI_FS_CHANNEL_IDENTIFICATION;
- hsai->SlotInit.SlotActive = SAI_SLOTACTIVE_ALL;
- hsai->SlotInit.FirstBitOffset = 0;
- hsai->SlotInit.SlotNumber = nbslot;
-
- /* in IS2 the number of slot must be even */
- if((nbslot & 0x1) != 0 )
- {
- return HAL_ERROR;
- }
-
- switch(protocol)
- {
- case SAI_I2S_STANDARD :
- hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_LOW;
- hsai->FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT;
- break;
- case SAI_I2S_MSBJUSTIFIED :
- case SAI_I2S_LSBJUSTIFIED :
- hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_HIGH;
- hsai->FrameInit.FSOffset = SAI_FS_FIRSTBIT;
- break;
- default :
- return HAL_ERROR;
- }
-
- /* Frame definition */
- hsai->Init.DataSize = 0xFFFFFFFF;
- switch(datasize)
- {
- case SAI_PROTOCOL_DATASIZE_16BIT:
- hsai->Init.DataSize = SAI_DATASIZE_16;
- hsai->FrameInit.FrameLength = 32*(nbslot/2);
- hsai->FrameInit.ActiveFrameLength = 16*(nbslot/2);
- hsai->SlotInit.SlotSize = SAI_SLOTSIZE_16B;
- break;
- case SAI_PROTOCOL_DATASIZE_16BITEXTENDED :
- if(hsai->Init.DataSize == 0xFFFFFFFF)
- {
- hsai->Init.DataSize = SAI_DATASIZE_16;
- }
- break;
- case SAI_PROTOCOL_DATASIZE_24BIT:
- if(hsai->Init.DataSize == 0xFFFFFFFF)
- {
- hsai->Init.DataSize = SAI_DATASIZE_24;
- }
- break;
- case SAI_PROTOCOL_DATASIZE_32BIT:
- if(hsai->Init.DataSize == 0xFFFFFFFF)
- {
- hsai->Init.DataSize = SAI_DATASIZE_32;
- }
- hsai->FrameInit.FrameLength = 64*(nbslot/2);
- hsai->FrameInit.ActiveFrameLength = 32*(nbslot/2);
- hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
- if(protocol == SAI_I2S_LSBJUSTIFIED)
- {
- if (datasize == SAI_PROTOCOL_DATASIZE_16BITEXTENDED)
- {
- hsai->SlotInit.FirstBitOffset = 16;
- }
- if (datasize == SAI_PROTOCOL_DATASIZE_24BIT)
- {
- hsai->SlotInit.FirstBitOffset = 8;
- }
- }
- break;
- default :
- return HAL_ERROR;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the SAI PCM protocol according to the specified parameters
- * in the SAI_InitTypeDef and create the associated handle.
- * @param hsai : pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @param protocol : one of the supported protocol
- * @param datasize : one of the supported datasize @ref SAI_Protocol_DataSize
- * @param nbslot : number of slot minimum value is 1 and the max is 16.
- * @retval HAL status
- */
-static HAL_StatusTypeDef SAI_InitPCM(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot)
-{
- /* Check the parameters */
- assert_param(IS_SAI_SUPPORTED_PROTOCOL(protocol));
- assert_param(IS_SAI_PROTOCOL_DATASIZE(datasize));
-
- hsai->Init.Protocol = SAI_FREE_PROTOCOL;
- hsai->Init.FirstBit = SAI_FIRSTBIT_MSB;
- hsai->Init.ClockStrobing = SAI_CLOCKSTROBING_FALLINGEDGE;
- hsai->FrameInit.FSDefinition = SAI_FS_STARTFRAME;
- hsai->FrameInit.FSPolarity = SAI_FS_ACTIVE_HIGH;
- hsai->FrameInit.FSOffset = SAI_FS_BEFOREFIRSTBIT;
- hsai->SlotInit.FirstBitOffset = 0;
- hsai->SlotInit.SlotNumber = nbslot;
- hsai->SlotInit.SlotActive = SAI_SLOTACTIVE_ALL;
-
- switch(protocol)
- {
- case SAI_PCM_SHORT :
- hsai->FrameInit.ActiveFrameLength = 1;
- break;
- case SAI_PCM_LONG :
- hsai->FrameInit.ActiveFrameLength = 13;
- break;
- default :
- return HAL_ERROR;
- }
-
- switch(datasize)
- {
- case SAI_PROTOCOL_DATASIZE_16BIT:
- hsai->Init.DataSize = SAI_DATASIZE_16;
- hsai->FrameInit.FrameLength = 16 * nbslot;
- hsai->SlotInit.SlotSize = SAI_SLOTSIZE_16B;
- break;
- case SAI_PROTOCOL_DATASIZE_16BITEXTENDED :
- hsai->Init.DataSize = SAI_DATASIZE_16;
- hsai->FrameInit.FrameLength = 32 * nbslot;
- hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
- break;
-
- case SAI_PROTOCOL_DATASIZE_32BIT:
- hsai->Init.DataSize = SAI_DATASIZE_32;
- hsai->FrameInit.FrameLength = 32 * nbslot;
- hsai->SlotInit.SlotSize = SAI_SLOTSIZE_32B;
- break;
- default :
- return HAL_ERROR;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Fill the fifo
- * @param hsai : pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval None.
- */
-static void SAI_FillFifo(SAI_HandleTypeDef *hsai)
-{
- /* fill the fifo with data before to enabled the SAI */
- while((hsai->Instance->SR & SAI_xSR_FLVL) != SAI_FIFOSTATUS_FULL)
- {
- if((hsai->Init.DataSize == SAI_DATASIZE_8) && (hsai->Init.CompandingMode == SAI_NOCOMPANDING))
- {
- hsai->Instance->DR = (*hsai->pBuffPtr++);
- }
- else if(hsai->Init.DataSize <= SAI_DATASIZE_16)
- {
- hsai->Instance->DR = *((uint32_t *)hsai->pBuffPtr);
- hsai->pBuffPtr+= 2;
- }
- else
- {
- hsai->Instance->DR = *((uint32_t *)hsai->pBuffPtr);
- hsai->pBuffPtr+= 4;
- }
- hsai->XferCount--;
- }
-}
-
-/**
- * @brief return the interrupt flag to set according the SAI setup
- * @param hsai : pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @param mode : SAI_MODE_DMA or SAI_MODE_IT
- * @retval the list of the IT flag to enable
- */
-static uint32_t SAI_InterruptFlag(SAI_HandleTypeDef *hsai, uint32_t mode)
-{
- uint32_t tmpIT = SAI_IT_OVRUDR;
-
- if(mode == SAI_MODE_IT)
- {
- tmpIT|= SAI_IT_FREQ;
- }
-
- if((hsai->Init.AudioMode == SAI_MODESLAVE_RX) || (hsai->Init.AudioMode == SAI_MODESLAVE_TX))
- {
- tmpIT|= SAI_IT_AFSDET | SAI_IT_LFSDET;
- }
- else
- {
- /* hsai has been configured in master mode */
- tmpIT|= SAI_IT_WCKCFG;
- }
- return tmpIT;
-}
-
-/**
- * @brief disabled the SAI and wait the disabling
- * @param hsai : pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval None.
- */
-static HAL_StatusTypeDef SAI_Disable(SAI_HandleTypeDef *hsai)
-{
- uint32_t tickstart = HAL_GetTick();
- HAL_StatusTypeDef status = HAL_OK;
-
- __HAL_SAI_DISABLE(hsai);
- while((hsai->Instance->CR1 & SAI_xCR1_SAIEN) != RESET)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > SAI_TIMEOUT_VALUE)
- {
- /* Update error code */
- hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT;
-
- status = HAL_TIMEOUT;
-
- /* Change the SAI state */
- HAL_SAI_ErrorCallback(hsai);
- }
- }
- return status;
-}
-
-/**
- * @brief Tx Handler for Transmit in Interrupt mode 8Bit transfer
- * @param hsai : pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval None.
- */
-static void SAI_Transmit_IT8Bit(SAI_HandleTypeDef *hsai)
-{
- /* Write data on DR register */
- hsai->Instance->DR = (*hsai->pBuffPtr++);
- hsai->XferCount--;
-
- /* Handle the end of the transmission */
- if(hsai->XferCount == 0)
- {
- /* Disable FREQ and OVRUDR interrupts */
- __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
- hsai->State = HAL_SAI_STATE_READY;
- HAL_SAI_TxCpltCallback(hsai);
- }
-}
-
-/**
- * @brief Tx Handler for Transmit in Interrupt mode for 16Bit transfer
- * @param hsai : pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval None.
- */
-static void SAI_Transmit_IT16Bit(SAI_HandleTypeDef *hsai)
-{
- /* Write data on DR register */
- hsai->Instance->DR = *(uint16_t *)hsai->pBuffPtr;
- hsai->pBuffPtr+=2;
- hsai->XferCount--;
-
- /* Handle the end of the transmission */
- if(hsai->XferCount == 0)
- {
- /* Disable FREQ and OVRUDR interrupts */
- __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
- hsai->State = HAL_SAI_STATE_READY;
- HAL_SAI_TxCpltCallback(hsai);
- }
-}
-
-/**
- * @brief Tx Handler for Transmit in Interrupt mode for 32Bit transfer
- * @param hsai : pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval None.
- */
-static void SAI_Transmit_IT32Bit(SAI_HandleTypeDef *hsai)
-{
- /* Write data on DR register */
- hsai->Instance->DR = *(uint32_t *)hsai->pBuffPtr;
- hsai->pBuffPtr+=4;
- hsai->XferCount--;
-
- /* Handle the end of the transmission */
- if(hsai->XferCount == 0)
- {
- /* Disable FREQ and OVRUDR interrupts */
- __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
- hsai->State = HAL_SAI_STATE_READY;
- HAL_SAI_TxCpltCallback(hsai);
- }
-}
-
-/**
- * @brief Rx Handler for Receive in Interrupt mode 8Bit transfer
- * @param hsai : pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval None.
- */
-static void SAI_Receive_IT8Bit(SAI_HandleTypeDef *hsai)
-{
- /* Receive data */
- (*hsai->pBuffPtr++) = hsai->Instance->DR;
- hsai->XferCount--;
-
- /* Check end of the transfer */
- if(hsai->XferCount == 0)
- {
- /* Disable TXE and OVRUDR interrupts */
- __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
-
- /* Clear the SAI Overrun flag */
- __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR);
-
- hsai->State = HAL_SAI_STATE_READY;
- HAL_SAI_RxCpltCallback(hsai);
- }
-}
-
-/**
- * @brief Rx Handler for Receive in Interrupt mode for 16Bit transfer
- * @param hsai : pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval None.
- */
-static void SAI_Receive_IT16Bit(SAI_HandleTypeDef *hsai)
-{
- /* Receive data */
- *(uint16_t*)hsai->pBuffPtr = hsai->Instance->DR;
- hsai->pBuffPtr+=2;
- hsai->XferCount--;
-
- /* Check end of the transfer */
- if(hsai->XferCount == 0)
- {
- /* Disable TXE and OVRUDR interrupts */
- __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
-
- /* Clear the SAI Overrun flag */
- __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR);
-
- hsai->State = HAL_SAI_STATE_READY;
- HAL_SAI_RxCpltCallback(hsai);
- }
-}
-/**
- * @brief Rx Handler for Receive in Interrupt mode for 32Bit transfer
- * @param hsai : pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval None.
- */
-static void SAI_Receive_IT32Bit(SAI_HandleTypeDef *hsai)
-{
- /* Receive data */
- *(uint32_t*)hsai->pBuffPtr = hsai->Instance->DR;
- hsai->pBuffPtr+=4;
- hsai->XferCount--;
-
- /* Check end of the transfer */
- if(hsai->XferCount == 0)
- {
- /* Disable TXE and OVRUDR interrupts */
- __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_IT));
-
- /* Clear the SAI Overrun flag */
- __HAL_SAI_CLEAR_FLAG(hsai, SAI_FLAG_OVRUDR);
-
- hsai->State = HAL_SAI_STATE_READY;
- HAL_SAI_RxCpltCallback(hsai);
- }
-}
-
-/**
- * @brief DMA SAI transmit process complete callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void SAI_DMATxCplt(DMA_HandleTypeDef *hdma)
-{
- uint32_t tickstart = 0;
-
- SAI_HandleTypeDef* hsai = (SAI_HandleTypeDef*)((DMA_HandleTypeDef* )hdma)->Parent;
-
- if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
- {
- hsai->XferCount = 0;
-
- /* Disable SAI Tx DMA Request */
- hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN);
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Set timeout: 10 is the max delay to send the remaining data in the SAI FIFO */
- /* Wait until FIFO is empty */
- while(__HAL_SAI_GET_FLAG(hsai, SAI_xSR_FLVL) != RESET)
- {
- /* Check for the Timeout */
- if((HAL_GetTick() - tickstart ) > SAI_TIMEOUT_VALUE)
- {
- /* Update error code */
- hsai->ErrorCode |= HAL_SAI_ERROR_TIMEOUT;
-
- /* Change the SAI state */
- HAL_SAI_ErrorCallback(hsai);
- }
- }
-
- /* Stop the interrupts error handling */
- __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA));
-
- hsai->State= HAL_SAI_STATE_READY;
- }
- HAL_SAI_TxCpltCallback(hsai);
-}
-
-/**
- * @brief DMA SAI transmit process half complete callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void SAI_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
-{
- SAI_HandleTypeDef* hsai = (SAI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- HAL_SAI_TxHalfCpltCallback(hsai);
-}
-
-/**
- * @brief DMA SAI receive process complete callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void SAI_DMARxCplt(DMA_HandleTypeDef *hdma)
-{
- SAI_HandleTypeDef* hsai = ( SAI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
- {
- /* Disable Rx DMA Request */
- hsai->Instance->CR1 &= (uint32_t)(~SAI_xCR1_DMAEN);
- hsai->XferCount = 0;
-
- /* Stop the interrupts error handling */
- __HAL_SAI_DISABLE_IT(hsai, SAI_InterruptFlag(hsai, SAI_MODE_DMA));
-
- hsai->State = HAL_SAI_STATE_READY;
- }
- HAL_SAI_RxCpltCallback(hsai);
-}
-
-/**
- * @brief DMA SAI receive process half complete callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void SAI_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
-{
- SAI_HandleTypeDef* hsai = (SAI_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- HAL_SAI_RxHalfCpltCallback(hsai);
-}
-/**
- * @brief DMA SAI communication error callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void SAI_DMAError(DMA_HandleTypeDef *hdma)
-{
- SAI_HandleTypeDef* hsai = ( SAI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- /* Stop the DMA transfer */
- HAL_SAI_DMAStop(hsai);
-
- /* Set the SAI state ready to be able to start again the process */
- hsai->State= HAL_SAI_STATE_READY;
- HAL_SAI_ErrorCallback(hsai);
-
- hsai->XferCount = 0;
-}
-
-/**
- * @}
- */
-
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
-#endif /* HAL_SAI_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai_ex.c
deleted file mode 100644
index cad89d5..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sai_ex.c
+++ /dev/null
@@ -1,269 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_sai_ex.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief SAI Extension HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of SAI extension peripheral:
- * + Extension features functions
- *
- @verbatim
- ==============================================================================
- ##### SAI peripheral extension features #####
- ==============================================================================
-
- [..] Comparing to other previous devices, the SAI interface for STM32F446xx
- devices contains the following additional features :
-
- (+) Possibility to be clocked from PLLR
-
- ##### How to use this driver #####
- ==============================================================================
- [..] This driver provides functions to manage several sources to clock SAI
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup SAIEx SAIEx
- * @brief SAI Extension HAL module driver
- * @{
- */
-
-#ifdef HAL_SAI_MODULE_ENABLED
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* SAI registers Masks */
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup SAI_Private_Functions SAI Private Functions
- * @{
- */
- /**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup SAIEx_Exported_Functions SAI Extended Exported Functions
- * @{
- */
-
-/** @defgroup SAIEx_Exported_Functions_Group1 Extension features functions
- * @brief Extension features functions
- *
-@verbatim
- ===============================================================================
- ##### Extension features Functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to manage the possible
- SAI clock sources.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Configure SAI Block synchronization mode
- * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval SAI Clock Input
- */
-void SAI_BlockSynchroConfig(SAI_HandleTypeDef *hsai)
-{
- uint32_t tmpregisterGCR = 0;
-
-#if defined(STM32F446xx)
- /* This setting must be done with both audio block (A & B) disabled */
- switch(hsai->Init.SynchroExt)
- {
- case SAI_SYNCEXT_DISABLE :
- tmpregisterGCR = 0;
- break;
- case SAI_SYNCEXT_IN_ENABLE :
- tmpregisterGCR = SAI_GCR_SYNCIN_0;
- break;
- case SAI_SYNCEXT_OUTBLOCKA_ENABLE :
- tmpregisterGCR = SAI_GCR_SYNCOUT_0;
- break;
- case SAI_SYNCEXT_OUTBLOCKB_ENABLE :
- tmpregisterGCR = SAI_GCR_SYNCOUT_1;
- break;
- }
-
- if((hsai->Instance == SAI1_Block_A) || (hsai->Instance == SAI1_Block_B))
- {
- SAI1->GCR = tmpregisterGCR;
- }
- else
- {
- SAI2->GCR = tmpregisterGCR;
- }
-#endif /* STM32F446xx */
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
- /* This setting must be done with both audio block (A & B) disabled */
- switch(hsai->Init.SynchroExt)
- {
- case SAI_SYNCEXT_DISABLE :
- tmpregisterGCR = 0;
- break;
- case SAI_SYNCEXT_OUTBLOCKA_ENABLE :
- tmpregisterGCR = SAI_GCR_SYNCOUT_0;
- break;
- case SAI_SYNCEXT_OUTBLOCKB_ENABLE :
- tmpregisterGCR = SAI_GCR_SYNCOUT_1;
- break;
- }
- SAI1->GCR = tmpregisterGCR;
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-}
- /**
- * @brief Get SAI Input Clock based on SAI source clock selection
- * @param hsai: pointer to a SAI_HandleTypeDef structure that contains
- * the configuration information for SAI module.
- * @retval SAI Clock Input
- */
-uint32_t SAI_GetInputClock(SAI_HandleTypeDef *hsai)
-{
- /* This variable used to store the SAI_CK_x (value in Hz) */
- uint32_t saiclocksource = 0;
-
-#if defined(STM32F446xx)
- if ((hsai->Instance == SAI1_Block_A) || (hsai->Instance == SAI1_Block_B))
- {
- saiclocksource = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI1);
- }
- else /* SAI2_Block_A || SAI2_Block_B*/
- {
- saiclocksource = HAL_RCCEx_GetPeriphCLKFreq(RCC_PERIPHCLK_SAI2);
- }
-#endif /* STM32F446xx */
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
- uint32_t vcoinput = 0, tmpreg = 0;
-
- /* Check the SAI Block parameters */
- assert_param(IS_SAI_CLK_SOURCE(hsai->Init.ClockSource));
-
- /* SAI Block clock source selection */
- if(hsai->Instance == SAI1_Block_A)
- {
- __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(hsai->Init.ClockSource);
- }
- else
- {
- __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG((uint32_t)(hsai->Init.ClockSource << 2));
- }
-
- /* VCO Input Clock value calculation */
- if((RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) == RCC_PLLSOURCE_HSI)
- {
- /* In Case the PLL Source is HSI (Internal Clock) */
- vcoinput = (HSI_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM));
- }
- else
- {
- /* In Case the PLL Source is HSE (External Clock) */
- vcoinput = ((HSE_VALUE / (uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLM)));
- }
-
- /* SAI_CLK_x : SAI Block Clock configuration for different clock sources selected */
- if(hsai->Init.ClockSource == SAI_CLKSOURCE_PLLSAI)
- {
- /* Configure the PLLI2S division factor */
- /* PLLSAI_VCO Input = PLL_SOURCE/PLLM */
- /* PLLSAI_VCO Output = PLLSAI_VCO Input * PLLSAIN */
- /* SAI_CLK(first level) = PLLSAI_VCO Output/PLLSAIQ */
- tmpreg = (RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIQ) >> 24;
- saiclocksource = (vcoinput * ((RCC->PLLSAICFGR & RCC_PLLSAICFGR_PLLSAIN) >> 6))/(tmpreg);
-
- /* SAI_CLK_x = SAI_CLK(first level)/PLLSAIDIVQ */
- tmpreg = (((RCC->DCKCFGR & RCC_DCKCFGR_PLLSAIDIVQ) >> 8) + 1);
- saiclocksource = saiclocksource/(tmpreg);
-
- }
- else if(hsai->Init.ClockSource == SAI_CLKSOURCE_PLLI2S)
- {
- /* Configure the PLLI2S division factor */
- /* PLLI2S_VCO Input = PLL_SOURCE/PLLM */
- /* PLLI2S_VCO Output = PLLI2S_VCO Input * PLLI2SN */
- /* SAI_CLK(first level) = PLLI2S_VCO Output/PLLI2SQ */
- tmpreg = (RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SQ) >> 24;
- saiclocksource = (vcoinput * ((RCC->PLLI2SCFGR & RCC_PLLI2SCFGR_PLLI2SN) >> 6))/(tmpreg);
-
- /* SAI_CLK_x = SAI_CLK(first level)/PLLI2SDIVQ */
- tmpreg = ((RCC->DCKCFGR & RCC_DCKCFGR_PLLI2SDIVQ) + 1);
- saiclocksource = saiclocksource/(tmpreg);
- }
- else /* sConfig->ClockSource == SAI_CLKSource_Ext */
- {
- /* Enable the External Clock selection */
- __HAL_RCC_I2S_CONFIG(RCC_I2SCLKSOURCE_EXT);
-
- saiclocksource = EXTERNAL_CLOCK_VALUE;
- }
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
- /* the return result is the value of SAI clock */
- return saiclocksource;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
-#endif /* HAL_SAI_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c
deleted file mode 100644
index d579fe8..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sd.c
+++ /dev/null
@@ -1,3488 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_sd.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief SD card HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Secure Digital (SD) peripheral:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral Control functions
- * + Peripheral State functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- This driver implements a high level communication layer for read and write from/to
- this memory. The needed STM32 hardware resources (SDIO and GPIO) are performed by
- the user in HAL_SD_MspInit() function (MSP layer).
- Basically, the MSP layer configuration should be the same as we provide in the
- examples.
- You can easily tailor this configuration according to hardware resources.
-
- [..]
- This driver is a generic layered driver for SDIO memories which uses the HAL
- SDIO driver functions to interface with SD and uSD cards devices.
- It is used as follows:
-
- (#)Initialize the SDIO low level resources by implement the HAL_SD_MspInit() API:
- (##) Enable the SDIO interface clock using __HAL_RCC_SDIO_CLK_ENABLE();
- (##) SDIO pins configuration for SD card
- (+++) Enable the clock for the SDIO GPIOs using the functions __HAL_RCC_GPIOx_CLK_ENABLE();
- (+++) Configure these SDIO pins as alternate function pull-up using HAL_GPIO_Init()
- and according to your pin assignment;
- (##) DMA Configuration if you need to use DMA process (HAL_SD_ReadBlocks_DMA()
- and HAL_SD_WriteBlocks_DMA() APIs).
- (+++) Enable the DMAx interface clock using __HAL_RCC_DMAx_CLK_ENABLE();
- (+++) Configure the DMA using the function HAL_DMA_Init() with predeclared and filled.
- (##) NVIC configuration if you need to use interrupt process when using DMA transfer.
- (+++) Configure the SDIO and DMA interrupt priorities using functions
- HAL_NVIC_SetPriority(); DMA priority is superior to SDIO's priority
- (+++) Enable the NVIC DMA and SDIO IRQs using function HAL_NVIC_EnableIRQ()
- (+++) SDIO interrupts are managed using the macros __HAL_SD_SDIO_ENABLE_IT()
- and __HAL_SD_SDIO_DISABLE_IT() inside the communication process.
- (+++) SDIO interrupts pending bits are managed using the macros __HAL_SD_SDIO_GET_IT()
- and __HAL_SD_SDIO_CLEAR_IT()
- (#) At this stage, you can perform SD read/write/erase operations after SD card initialization
-
-
- *** SD Card Initialization and configuration ***
- ================================================
- [..]
- To initialize the SD Card, use the HAL_SD_Init() function. It Initializes
- the SD Card and put it into Standby State (Ready for data transfer).
- This function provide the following operations:
-
- (#) Apply the SD Card initialization process at 400KHz and check the SD Card
- type (Standard Capacity or High Capacity). You can change or adapt this
- frequency by adjusting the "ClockDiv" field.
- The SD Card frequency (SDIO_CK) is computed as follows:
-
- SDIO_CK = SDIOCLK / (ClockDiv + 2)
-
- In initialization mode and according to the SD Card standard,
- make sure that the SDIO_CK frequency doesn't exceed 400KHz.
-
- (#) Get the SD CID and CSD data. All these information are managed by the SDCardInfo
- structure. This structure provide also ready computed SD Card capacity
- and Block size.
-
- -@- These information are stored in SD handle structure in case of future use.
-
- (#) Configure the SD Card Data transfer frequency. By Default, the card transfer
- frequency is set to 24MHz. You can change or adapt this frequency by adjusting
- the "ClockDiv" field.
- In transfer mode and according to the SD Card standard, make sure that the
- SDIO_CK frequency doesn't exceed 25MHz and 50MHz in High-speed mode switch.
- To be able to use a frequency higher than 24MHz, you should use the SDIO
- peripheral in bypass mode. Refer to the corresponding reference manual
- for more details.
-
- (#) Select the corresponding SD Card according to the address read with the step 2.
-
- (#) Configure the SD Card in wide bus mode: 4-bits data.
-
- *** SD Card Read operation ***
- ==============================
- [..]
- (+) You can read from SD card in polling mode by using function HAL_SD_ReadBlocks().
- This function support only 512-bytes block length (the block size should be
- chosen as 512 bytes).
- You can choose either one block read operation or multiple block read operation
- by adjusting the "NumberOfBlocks" parameter.
-
- (+) You can read from SD card in DMA mode by using function HAL_SD_ReadBlocks_DMA().
- This function support only 512-bytes block length (the block size should be
- chosen as 512 bytes).
- You can choose either one block read operation or multiple block read operation
- by adjusting the "NumberOfBlocks" parameter.
- After this, you have to call the function HAL_SD_CheckReadOperation(), to insure
- that the read transfer is done correctly in both DMA and SD sides.
-
- *** SD Card Write operation ***
- ===============================
- [..]
- (+) You can write to SD card in polling mode by using function HAL_SD_WriteBlocks().
- This function support only 512-bytes block length (the block size should be
- chosen as 512 bytes).
- You can choose either one block read operation or multiple block read operation
- by adjusting the "NumberOfBlocks" parameter.
-
- (+) You can write to SD card in DMA mode by using function HAL_SD_WriteBlocks_DMA().
- This function support only 512-bytes block length (the block size should be
- chosen as 512 byte).
- You can choose either one block read operation or multiple block read operation
- by adjusting the "NumberOfBlocks" parameter.
- After this, you have to call the function HAL_SD_CheckWriteOperation(), to insure
- that the write transfer is done correctly in both DMA and SD sides.
-
- *** SD card status ***
- ======================
- [..]
- (+) At any time, you can check the SD Card status and get the SD card state
- by using the HAL_SD_GetStatus() function. This function checks first if the
- SD card is still connected and then get the internal SD Card transfer state.
- (+) You can also get the SD card SD Status register by using the HAL_SD_SendSDStatus()
- function.
-
- *** SD HAL driver macros list ***
- ==================================
- [..]
- Below the list of most used macros in SD HAL driver.
-
- (+) __HAL_SD_SDIO_ENABLE : Enable the SD device
- (+) __HAL_SD_SDIO_DISABLE : Disable the SD device
- (+) __HAL_SD_SDIO_DMA_ENABLE: Enable the SDIO DMA transfer
- (+) __HAL_SD_SDIO_DMA_DISABLE: Disable the SDIO DMA transfer
- (+) __HAL_SD_SDIO_ENABLE_IT: Enable the SD device interrupt
- (+) __HAL_SD_SDIO_DISABLE_IT: Disable the SD device interrupt
- (+) __HAL_SD_SDIO_GET_FLAG:Check whether the specified SD flag is set or not
- (+) __HAL_SD_SDIO_CLEAR_FLAG: Clear the SD's pending flags
-
- (@) You can refer to the SD HAL driver header file for more useful macros
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-#ifdef HAL_SD_MODULE_ENABLED
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @addtogroup SD
- * @{
- */
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @addtogroup SD_Private_Defines
- * @{
- */
-/**
- * @brief SDIO Data block size
- */
-#define DATA_BLOCK_SIZE ((uint32_t)(9 << 4))
-/**
- * @brief SDIO Static flags, Timeout, FIFO Address
- */
-#define SDIO_STATIC_FLAGS ((uint32_t)(SDIO_FLAG_CCRCFAIL | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_CTIMEOUT |\
- SDIO_FLAG_DTIMEOUT | SDIO_FLAG_TXUNDERR | SDIO_FLAG_RXOVERR |\
- SDIO_FLAG_CMDREND | SDIO_FLAG_CMDSENT | SDIO_FLAG_DATAEND |\
- SDIO_FLAG_DBCKEND))
-
-#define SDIO_CMD0TIMEOUT ((uint32_t)0x00010000)
-
-/**
- * @brief Mask for errors Card Status R1 (OCR Register)
- */
-#define SD_OCR_ADDR_OUT_OF_RANGE ((uint32_t)0x80000000)
-#define SD_OCR_ADDR_MISALIGNED ((uint32_t)0x40000000)
-#define SD_OCR_BLOCK_LEN_ERR ((uint32_t)0x20000000)
-#define SD_OCR_ERASE_SEQ_ERR ((uint32_t)0x10000000)
-#define SD_OCR_BAD_ERASE_PARAM ((uint32_t)0x08000000)
-#define SD_OCR_WRITE_PROT_VIOLATION ((uint32_t)0x04000000)
-#define SD_OCR_LOCK_UNLOCK_FAILED ((uint32_t)0x01000000)
-#define SD_OCR_COM_CRC_FAILED ((uint32_t)0x00800000)
-#define SD_OCR_ILLEGAL_CMD ((uint32_t)0x00400000)
-#define SD_OCR_CARD_ECC_FAILED ((uint32_t)0x00200000)
-#define SD_OCR_CC_ERROR ((uint32_t)0x00100000)
-#define SD_OCR_GENERAL_UNKNOWN_ERROR ((uint32_t)0x00080000)
-#define SD_OCR_STREAM_READ_UNDERRUN ((uint32_t)0x00040000)
-#define SD_OCR_STREAM_WRITE_OVERRUN ((uint32_t)0x00020000)
-#define SD_OCR_CID_CSD_OVERWRITE ((uint32_t)0x00010000)
-#define SD_OCR_WP_ERASE_SKIP ((uint32_t)0x00008000)
-#define SD_OCR_CARD_ECC_DISABLED ((uint32_t)0x00004000)
-#define SD_OCR_ERASE_RESET ((uint32_t)0x00002000)
-#define SD_OCR_AKE_SEQ_ERROR ((uint32_t)0x00000008)
-#define SD_OCR_ERRORBITS ((uint32_t)0xFDFFE008)
-
-/**
- * @brief Masks for R6 Response
- */
-#define SD_R6_GENERAL_UNKNOWN_ERROR ((uint32_t)0x00002000)
-#define SD_R6_ILLEGAL_CMD ((uint32_t)0x00004000)
-#define SD_R6_COM_CRC_FAILED ((uint32_t)0x00008000)
-
-#define SD_VOLTAGE_WINDOW_SD ((uint32_t)0x80100000)
-#define SD_HIGH_CAPACITY ((uint32_t)0x40000000)
-#define SD_STD_CAPACITY ((uint32_t)0x00000000)
-#define SD_CHECK_PATTERN ((uint32_t)0x000001AA)
-
-#define SD_MAX_VOLT_TRIAL ((uint32_t)0x0000FFFF)
-#define SD_ALLZERO ((uint32_t)0x00000000)
-
-#define SD_WIDE_BUS_SUPPORT ((uint32_t)0x00040000)
-#define SD_SINGLE_BUS_SUPPORT ((uint32_t)0x00010000)
-#define SD_CARD_LOCKED ((uint32_t)0x02000000)
-
-#define SD_DATATIMEOUT ((uint32_t)0xFFFFFFFF)
-#define SD_0TO7BITS ((uint32_t)0x000000FF)
-#define SD_8TO15BITS ((uint32_t)0x0000FF00)
-#define SD_16TO23BITS ((uint32_t)0x00FF0000)
-#define SD_24TO31BITS ((uint32_t)0xFF000000)
-#define SD_MAX_DATA_LENGTH ((uint32_t)0x01FFFFFF)
-
-#define SD_HALFFIFO ((uint32_t)0x00000008)
-#define SD_HALFFIFOBYTES ((uint32_t)0x00000020)
-
-/**
- * @brief Command Class Supported
- */
-#define SD_CCCC_LOCK_UNLOCK ((uint32_t)0x00000080)
-#define SD_CCCC_WRITE_PROT ((uint32_t)0x00000040)
-#define SD_CCCC_ERASE ((uint32_t)0x00000020)
-
-/**
- * @brief Following commands are SD Card Specific commands.
- * SDIO_APP_CMD should be sent before sending these commands.
- */
-#define SD_SDIO_SEND_IF_COND ((uint32_t)SD_CMD_HS_SEND_EXT_CSD)
-
-/**
- * @}
- */
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @addtogroup SD_Private_Functions_Prototypes
- * @{
- */
-static HAL_SD_ErrorTypedef SD_Initialize_Cards(SD_HandleTypeDef *hsd);
-static HAL_SD_ErrorTypedef SD_Select_Deselect(SD_HandleTypeDef *hsd, uint64_t addr);
-static HAL_SD_ErrorTypedef SD_PowerON(SD_HandleTypeDef *hsd);
-static HAL_SD_ErrorTypedef SD_PowerOFF(SD_HandleTypeDef *hsd);
-static HAL_SD_ErrorTypedef SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus);
-static HAL_SD_CardStateTypedef SD_GetState(SD_HandleTypeDef *hsd);
-static HAL_SD_ErrorTypedef SD_IsCardProgramming(SD_HandleTypeDef *hsd, uint8_t *pStatus);
-static HAL_SD_ErrorTypedef SD_CmdError(SD_HandleTypeDef *hsd);
-static HAL_SD_ErrorTypedef SD_CmdResp1Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD);
-static HAL_SD_ErrorTypedef SD_CmdResp7Error(SD_HandleTypeDef *hsd);
-static HAL_SD_ErrorTypedef SD_CmdResp3Error(SD_HandleTypeDef *hsd);
-static HAL_SD_ErrorTypedef SD_CmdResp2Error(SD_HandleTypeDef *hsd);
-static HAL_SD_ErrorTypedef SD_CmdResp6Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD, uint16_t *pRCA);
-static HAL_SD_ErrorTypedef SD_WideBus_Enable(SD_HandleTypeDef *hsd);
-static HAL_SD_ErrorTypedef SD_WideBus_Disable(SD_HandleTypeDef *hsd);
-static HAL_SD_ErrorTypedef SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR);
-static void SD_DMA_RxCplt(DMA_HandleTypeDef *hdma);
-static void SD_DMA_RxError(DMA_HandleTypeDef *hdma);
-static void SD_DMA_TxCplt(DMA_HandleTypeDef *hdma);
-static void SD_DMA_TxError(DMA_HandleTypeDef *hdma);
-/**
- * @}
- */
-/* Exported functions --------------------------------------------------------*/
-/** @addtogroup SD_Exported_Functions
- * @{
- */
-
-/** @addtogroup SD_Exported_Functions_Group1
- * @brief Initialization and de-initialization functions
- *
-@verbatim
- ==============================================================================
- ##### Initialization and de-initialization functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to initialize/de-initialize the SD
- card device to be ready for use.
-
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the SD card according to the specified parameters in the
- SD_HandleTypeDef and create the associated handle.
- * @param hsd: SD handle
- * @param SDCardInfo: HAL_SD_CardInfoTypedef structure for SD card information
- * @retval HAL SD error state
- */
-HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo)
-{
- __IO HAL_SD_ErrorTypedef errorstate = SD_OK;
- SD_InitTypeDef tmpinit;
-
- /* Allocate lock resource and initialize it */
- hsd->Lock = HAL_UNLOCKED;
- /* Initialize the low level hardware (MSP) */
- HAL_SD_MspInit(hsd);
-
- /* Default SDIO peripheral configuration for SD card initialization */
- tmpinit.ClockEdge = SDIO_CLOCK_EDGE_RISING;
- tmpinit.ClockBypass = SDIO_CLOCK_BYPASS_DISABLE;
- tmpinit.ClockPowerSave = SDIO_CLOCK_POWER_SAVE_DISABLE;
- tmpinit.BusWide = SDIO_BUS_WIDE_1B;
- tmpinit.HardwareFlowControl = SDIO_HARDWARE_FLOW_CONTROL_DISABLE;
- tmpinit.ClockDiv = SDIO_INIT_CLK_DIV;
-
- /* Initialize SDIO peripheral interface with default configuration */
- SDIO_Init(hsd->Instance, tmpinit);
-
- /* Identify card operating voltage */
- errorstate = SD_PowerON(hsd);
-
- if(errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Initialize the present SDIO card(s) and put them in idle state */
- errorstate = SD_Initialize_Cards(hsd);
-
- if (errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Read CSD/CID MSD registers */
- errorstate = HAL_SD_Get_CardInfo(hsd, SDCardInfo);
-
- if (errorstate == SD_OK)
- {
- /* Select the Card */
- errorstate = SD_Select_Deselect(hsd, (uint32_t)(((uint32_t)SDCardInfo->RCA) << 16));
- }
-
- /* Configure SDIO peripheral interface */
- SDIO_Init(hsd->Instance, hsd->Init);
-
- return errorstate;
-}
-
-/**
- * @brief De-Initializes the SD card.
- * @param hsd: SD handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SD_DeInit(SD_HandleTypeDef *hsd)
-{
-
- /* Set SD power state to off */
- SD_PowerOFF(hsd);
-
- /* De-Initialize the MSP layer */
- HAL_SD_MspDeInit(hsd);
-
- return HAL_OK;
-}
-
-
-/**
- * @brief Initializes the SD MSP.
- * @param hsd: SD handle
- * @retval None
- */
-__weak void HAL_SD_MspInit(SD_HandleTypeDef *hsd)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SD_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief De-Initialize SD MSP.
- * @param hsd: SD handle
- * @retval None
- */
-__weak void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SD_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @addtogroup SD_Exported_Functions_Group2
- * @brief Data transfer functions
- *
-@verbatim
- ==============================================================================
- ##### IO operation functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to manage the data
- transfer from/to SD card.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Reads block(s) from a specified address in a card. The Data transfer
- * is managed by polling mode.
- * @param hsd: SD handle
- * @param pReadBuffer: pointer to the buffer that will contain the received data
- * @param ReadAddr: Address from where data is to be read
- * @param BlockSize: SD card Data block size
- * @note BlockSize must be 512 bytes.
- * @param NumberOfBlocks: Number of SD blocks to read
- * @retval SD Card error state
- */
-HAL_SD_ErrorTypedef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
-{
- SDIO_CmdInitTypeDef sdio_cmdinitstructure;
- SDIO_DataInitTypeDef sdio_datainitstructure;
- HAL_SD_ErrorTypedef errorstate = SD_OK;
- uint32_t count = 0, *tempbuff = (uint32_t *)pReadBuffer;
-
- /* Initialize data control register */
- hsd->Instance->DCTRL = 0;
-
- if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
- {
- BlockSize = 512;
- ReadAddr /= 512;
- }
-
- /* Set Block Size for Card */
- sdio_cmdinitstructure.Argument = (uint32_t) BlockSize;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
- sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
- sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
- sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
-
- if (errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Configure the SD DPSM (Data Path State Machine) */
- sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
- sdio_datainitstructure.DataLength = NumberOfBlocks * BlockSize;
- sdio_datainitstructure.DataBlockSize = DATA_BLOCK_SIZE;
- sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
- sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
- sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
- SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
-
- if(NumberOfBlocks > 1)
- {
- /* Send CMD18 READ_MULT_BLOCK with argument data address */
- sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_MULT_BLOCK;
- }
- else
- {
- /* Send CMD17 READ_SINGLE_BLOCK */
- sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_SINGLE_BLOCK;
- }
-
- sdio_cmdinitstructure.Argument = (uint32_t)ReadAddr;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Read block(s) in polling mode */
- if(NumberOfBlocks > 1)
- {
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_MULT_BLOCK);
-
- if (errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Poll on SDIO flags */
-#ifdef SDIO_STA_STBITERR
- while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR))
-#else /* SDIO_STA_STBITERR not defined */
- while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND))
-#endif /* SDIO_STA_STBITERR */
- {
- if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF))
- {
- /* Read data from SDIO Rx FIFO */
- for (count = 0; count < 8; count++)
- {
- *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance);
- }
-
- tempbuff += 8;
- }
- }
- }
- else
- {
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_SINGLE_BLOCK);
-
- if (errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* In case of single block transfer, no need of stop transfer at all */
-#ifdef SDIO_STA_STBITERR
- while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
-#else /* SDIO_STA_STBITERR not defined */
- while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
-#endif /* SDIO_STA_STBITERR */
- {
- if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF))
- {
- /* Read data from SDIO Rx FIFO */
- for (count = 0; count < 8; count++)
- {
- *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance);
- }
-
- tempbuff += 8;
- }
- }
- }
-
- /* Send stop transmission command in case of multiblock read */
- if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1))
- {
- if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) ||\
- (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
- (hsd->CardType == HIGH_CAPACITY_SD_CARD))
- {
- /* Send stop transmission command */
- errorstate = HAL_SD_StopTransfer(hsd);
- }
- }
-
- /* Get error state */
- if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
-
- errorstate = SD_DATA_TIMEOUT;
-
- return errorstate;
- }
- else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
-
- errorstate = SD_DATA_CRC_FAIL;
-
- return errorstate;
- }
- else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
-
- errorstate = SD_RX_OVERRUN;
-
- return errorstate;
- }
-#ifdef SDIO_STA_STBITERR
- else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
-
- errorstate = SD_START_BIT_ERR;
-
- return errorstate;
- }
-#endif /* SDIO_STA_STBITERR */
- else
- {
- /* No error flag set */
- }
-
- count = SD_DATATIMEOUT;
-
- /* Empty FIFO if there is still any data */
- while ((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (count > 0))
- {
- *tempbuff = SDIO_ReadFIFO(hsd->Instance);
- tempbuff++;
- count--;
- }
-
- /* Clear all the static flags */
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
-
- return errorstate;
-}
-
-/**
- * @brief Allows to write block(s) to a specified address in a card. The Data
- * transfer is managed by polling mode.
- * @param hsd: SD handle
- * @param pWriteBuffer: pointer to the buffer that will contain the data to transmit
- * @param WriteAddr: Address from where data is to be written
- * @param BlockSize: SD card Data block size
- * @note BlockSize must be 512 bytes.
- * @param NumberOfBlocks: Number of SD blocks to write
- * @retval SD Card error state
- */
-HAL_SD_ErrorTypedef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
-{
- SDIO_CmdInitTypeDef sdio_cmdinitstructure;
- SDIO_DataInitTypeDef sdio_datainitstructure;
- HAL_SD_ErrorTypedef errorstate = SD_OK;
- uint32_t totalnumberofbytes = 0, bytestransferred = 0, count = 0, restwords = 0;
- uint32_t *tempbuff = (uint32_t *)pWriteBuffer;
- uint8_t cardstate = 0;
-
- /* Initialize data control register */
- hsd->Instance->DCTRL = 0;
-
- if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
- {
- BlockSize = 512;
- WriteAddr /= 512;
- }
-
- /* Set Block Size for Card */
- sdio_cmdinitstructure.Argument = (uint32_t)BlockSize;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
- sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
- sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
- sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
-
- if (errorstate != SD_OK)
- {
- return errorstate;
- }
-
- if(NumberOfBlocks > 1)
- {
- /* Send CMD25 WRITE_MULT_BLOCK with argument data address */
- sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_MULT_BLOCK;
- }
- else
- {
- /* Send CMD24 WRITE_SINGLE_BLOCK */
- sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_SINGLE_BLOCK;
- }
-
- sdio_cmdinitstructure.Argument = (uint32_t)WriteAddr;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- if(NumberOfBlocks > 1)
- {
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_MULT_BLOCK);
- }
- else
- {
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_SINGLE_BLOCK);
- }
-
- if (errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Set total number of bytes to write */
- totalnumberofbytes = NumberOfBlocks * BlockSize;
-
- /* Configure the SD DPSM (Data Path State Machine) */
- sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
- sdio_datainitstructure.DataLength = NumberOfBlocks * BlockSize;
- sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
- sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_CARD;
- sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
- sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
- SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
-
- /* Write block(s) in polling mode */
- if(NumberOfBlocks > 1)
- {
-#ifdef SDIO_STA_STBITERR
- while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND | SDIO_FLAG_STBITERR))
-#else /* SDIO_STA_STBITERR not defined */
- while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DATAEND))
-#endif /* SDIO_STA_STBITERR */
- {
- if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXFIFOHE))
- {
- if ((totalnumberofbytes - bytestransferred) < 32)
- {
- restwords = ((totalnumberofbytes - bytestransferred) % 4 == 0) ? ((totalnumberofbytes - bytestransferred) / 4) : (( totalnumberofbytes - bytestransferred) / 4 + 1);
-
- /* Write data to SDIO Tx FIFO */
- for (count = 0; count < restwords; count++)
- {
- SDIO_WriteFIFO(hsd->Instance, tempbuff);
- tempbuff++;
- bytestransferred += 4;
- }
- }
- else
- {
- /* Write data to SDIO Tx FIFO */
- for (count = 0; count < 8; count++)
- {
- SDIO_WriteFIFO(hsd->Instance, (tempbuff + count));
- }
-
- tempbuff += 8;
- bytestransferred += 32;
- }
- }
- }
- }
- else
- {
- /* In case of single data block transfer no need of stop command at all */
-#ifdef SDIO_STA_STBITERR
- while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
-#else /* SDIO_STA_STBITERR not defined */
- while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
-#endif /* SDIO_STA_STBITERR */
- {
- if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXFIFOHE))
- {
- if ((totalnumberofbytes - bytestransferred) < 32)
- {
- restwords = ((totalnumberofbytes - bytestransferred) % 4 == 0) ? ((totalnumberofbytes - bytestransferred) / 4) : (( totalnumberofbytes - bytestransferred) / 4 + 1);
-
- /* Write data to SDIO Tx FIFO */
- for (count = 0; count < restwords; count++)
- {
- SDIO_WriteFIFO(hsd->Instance, tempbuff);
- tempbuff++;
- bytestransferred += 4;
- }
- }
- else
- {
- /* Write data to SDIO Tx FIFO */
- for (count = 0; count < 8; count++)
- {
- SDIO_WriteFIFO(hsd->Instance, (tempbuff + count));
- }
-
- tempbuff += 8;
- bytestransferred += 32;
- }
- }
- }
- }
-
- /* Send stop transmission command in case of multiblock write */
- if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DATAEND) && (NumberOfBlocks > 1))
- {
- if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
- (hsd->CardType == HIGH_CAPACITY_SD_CARD))
- {
- /* Send stop transmission command */
- errorstate = HAL_SD_StopTransfer(hsd);
- }
- }
-
- /* Get error state */
- if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
-
- errorstate = SD_DATA_TIMEOUT;
-
- return errorstate;
- }
- else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
-
- errorstate = SD_DATA_CRC_FAIL;
-
- return errorstate;
- }
- else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXUNDERR))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_TXUNDERR);
-
- errorstate = SD_TX_UNDERRUN;
-
- return errorstate;
- }
-#ifdef SDIO_STA_STBITERR
- else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
-
- errorstate = SD_START_BIT_ERR;
-
- return errorstate;
- }
-#endif /* SDIO_STA_STBITERR */
- else
- {
- /* No error flag set */
- }
-
- /* Clear all the static flags */
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
-
- /* Wait till the card is in programming state */
- errorstate = SD_IsCardProgramming(hsd, &cardstate);
-
- while ((errorstate == SD_OK) && ((cardstate == SD_CARD_PROGRAMMING) || (cardstate == SD_CARD_RECEIVING)))
- {
- errorstate = SD_IsCardProgramming(hsd, &cardstate);
- }
-
- return errorstate;
-}
-
-/**
- * @brief Reads block(s) from a specified address in a card. The Data transfer
- * is managed by DMA mode.
- * @note This API should be followed by the function HAL_SD_CheckReadOperation()
- * to check the completion of the read process
- * @param hsd: SD handle
- * @param pReadBuffer: Pointer to the buffer that will contain the received data
- * @param ReadAddr: Address from where data is to be read
- * @param BlockSize: SD card Data block size
- * @note BlockSize must be 512 bytes.
- * @param NumberOfBlocks: Number of blocks to read.
- * @retval SD Card error state
- */
-HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
-{
- SDIO_CmdInitTypeDef sdio_cmdinitstructure;
- SDIO_DataInitTypeDef sdio_datainitstructure;
- HAL_SD_ErrorTypedef errorstate = SD_OK;
-
- /* Initialize data control register */
- hsd->Instance->DCTRL = 0;
-
- /* Initialize handle flags */
- hsd->SdTransferCplt = 0;
- hsd->DmaTransferCplt = 0;
- hsd->SdTransferErr = SD_OK;
-
- /* Initialize SD Read operation */
- if(NumberOfBlocks > 1)
- {
- hsd->SdOperation = SD_READ_MULTIPLE_BLOCK;
- }
- else
- {
- hsd->SdOperation = SD_READ_SINGLE_BLOCK;
- }
-
- /* Enable transfer interrupts */
-#ifdef SDIO_STA_STBITERR
- __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\
- SDIO_IT_DTIMEOUT |\
- SDIO_IT_DATAEND |\
- SDIO_IT_RXOVERR |\
- SDIO_IT_STBITERR));
-#else /* SDIO_STA_STBITERR not defined */
- __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\
- SDIO_IT_DTIMEOUT |\
- SDIO_IT_DATAEND |\
- SDIO_IT_RXOVERR));
-#endif /* SDIO_STA_STBITERR */
-
- /* Enable SDIO DMA transfer */
- __HAL_SD_SDIO_DMA_ENABLE();
-
- /* Configure DMA user callbacks */
- hsd->hdmarx->XferCpltCallback = SD_DMA_RxCplt;
- hsd->hdmarx->XferErrorCallback = SD_DMA_RxError;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(hsd->hdmarx, (uint32_t)&hsd->Instance->FIFO, (uint32_t)pReadBuffer, (uint32_t)(BlockSize * NumberOfBlocks)/4);
-
- if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
- {
- BlockSize = 512;
- ReadAddr /= 512;
- }
-
- /* Set Block Size for Card */
- sdio_cmdinitstructure.Argument = (uint32_t)BlockSize;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
- sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
- sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
- sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
-
- if (errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Configure the SD DPSM (Data Path State Machine) */
- sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
- sdio_datainitstructure.DataLength = BlockSize * NumberOfBlocks;
- sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
- sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
- sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
- sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
- SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
-
- /* Check number of blocks command */
- if(NumberOfBlocks > 1)
- {
- /* Send CMD18 READ_MULT_BLOCK with argument data address */
- sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_MULT_BLOCK;
- }
- else
- {
- /* Send CMD17 READ_SINGLE_BLOCK */
- sdio_cmdinitstructure.CmdIndex = SD_CMD_READ_SINGLE_BLOCK;
- }
-
- sdio_cmdinitstructure.Argument = (uint32_t)ReadAddr;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- if(NumberOfBlocks > 1)
- {
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_MULT_BLOCK);
- }
- else
- {
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_READ_SINGLE_BLOCK);
- }
-
- /* Update the SD transfer error in SD handle */
- hsd->SdTransferErr = errorstate;
-
- return errorstate;
-}
-
-
-/**
- * @brief Writes block(s) to a specified address in a card. The Data transfer
- * is managed by DMA mode.
- * @note This API should be followed by the function HAL_SD_CheckWriteOperation()
- * to check the completion of the write process (by SD current status polling).
- * @param hsd: SD handle
- * @param pWriteBuffer: pointer to the buffer that will contain the data to transmit
- * @param WriteAddr: Address from where data is to be read
- * @param BlockSize: the SD card Data block size
- * @note BlockSize must be 512 bytes.
- * @param NumberOfBlocks: Number of blocks to write
- * @retval SD Card error state
- */
-HAL_SD_ErrorTypedef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks)
-{
- SDIO_CmdInitTypeDef sdio_cmdinitstructure;
- SDIO_DataInitTypeDef sdio_datainitstructure;
- HAL_SD_ErrorTypedef errorstate = SD_OK;
-
- /* Initialize data control register */
- hsd->Instance->DCTRL = 0;
-
- /* Initialize handle flags */
- hsd->SdTransferCplt = 0;
- hsd->DmaTransferCplt = 0;
- hsd->SdTransferErr = SD_OK;
-
- /* Initialize SD Write operation */
- if(NumberOfBlocks > 1)
- {
- hsd->SdOperation = SD_WRITE_MULTIPLE_BLOCK;
- }
- else
- {
- hsd->SdOperation = SD_WRITE_SINGLE_BLOCK;
- }
-
- /* Enable transfer interrupts */
-#ifdef SDIO_STA_STBITERR
- __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\
- SDIO_IT_DTIMEOUT |\
- SDIO_IT_DATAEND |\
- SDIO_IT_TXUNDERR |\
- SDIO_IT_STBITERR));
-#else /* SDIO_STA_STBITERR not defined */
- __HAL_SD_SDIO_ENABLE_IT(hsd, (SDIO_IT_DCRCFAIL |\
- SDIO_IT_DTIMEOUT |\
- SDIO_IT_DATAEND |\
- SDIO_IT_TXUNDERR));
-#endif /* SDIO_STA_STBITERR */
-
- /* Configure DMA user callbacks */
- hsd->hdmatx->XferCpltCallback = SD_DMA_TxCplt;
- hsd->hdmatx->XferErrorCallback = SD_DMA_TxError;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(hsd->hdmatx, (uint32_t)pWriteBuffer, (uint32_t)&hsd->Instance->FIFO, (uint32_t)(BlockSize * NumberOfBlocks)/4);
-
- /* Enable SDIO DMA transfer */
- __HAL_SD_SDIO_DMA_ENABLE();
-
- if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
- {
- BlockSize = 512;
- WriteAddr /= 512;
- }
-
- /* Set Block Size for Card */
- sdio_cmdinitstructure.Argument = (uint32_t)BlockSize;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
- sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
- sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
- sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
-
- if (errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Check number of blocks command */
- if(NumberOfBlocks <= 1)
- {
- /* Send CMD24 WRITE_SINGLE_BLOCK */
- sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_SINGLE_BLOCK;
- }
- else
- {
- /* Send CMD25 WRITE_MULT_BLOCK with argument data address */
- sdio_cmdinitstructure.CmdIndex = SD_CMD_WRITE_MULT_BLOCK;
- }
-
- sdio_cmdinitstructure.Argument = (uint32_t)WriteAddr;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- if(NumberOfBlocks > 1)
- {
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_MULT_BLOCK);
- }
- else
- {
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_WRITE_SINGLE_BLOCK);
- }
-
- if (errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Configure the SD DPSM (Data Path State Machine) */
- sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
- sdio_datainitstructure.DataLength = BlockSize * NumberOfBlocks;
- sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_512B;
- sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_CARD;
- sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
- sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
- SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
-
- hsd->SdTransferErr = errorstate;
-
- return errorstate;
-}
-
-/**
- * @brief This function waits until the SD DMA data read transfer is finished.
- * This API should be called after HAL_SD_ReadBlocks_DMA() function
- * to insure that all data sent by the card is already transferred by the
- * DMA controller.
- * @param hsd: SD handle
- * @param Timeout: Timeout duration
- * @retval SD Card error state
- */
-HAL_SD_ErrorTypedef HAL_SD_CheckReadOperation(SD_HandleTypeDef *hsd, uint32_t Timeout)
-{
- HAL_SD_ErrorTypedef errorstate = SD_OK;
- uint32_t timeout = Timeout;
- uint32_t tmp1, tmp2;
- HAL_SD_ErrorTypedef tmp3;
-
- /* Wait for DMA/SD transfer end or SD error variables to be in SD handle */
- tmp1 = hsd->DmaTransferCplt;
- tmp2 = hsd->SdTransferCplt;
- tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
-
- while ((tmp1 == 0) && (tmp2 == 0) && (tmp3 == SD_OK) && (timeout > 0))
- {
- tmp1 = hsd->DmaTransferCplt;
- tmp2 = hsd->SdTransferCplt;
- tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
- timeout--;
- }
-
- timeout = Timeout;
-
- /* Wait until the Rx transfer is no longer active */
- while((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXACT)) && (timeout > 0))
- {
- timeout--;
- }
-
- /* Send stop command in multiblock read */
- if (hsd->SdOperation == SD_READ_MULTIPLE_BLOCK)
- {
- errorstate = HAL_SD_StopTransfer(hsd);
- }
-
- if ((timeout == 0) && (errorstate == SD_OK))
- {
- errorstate = SD_DATA_TIMEOUT;
- }
-
- /* Clear all the static flags */
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
-
- /* Return error state */
- if (hsd->SdTransferErr != SD_OK)
- {
- return (HAL_SD_ErrorTypedef)(hsd->SdTransferErr);
- }
-
- return errorstate;
-}
-
-/**
- * @brief This function waits until the SD DMA data write transfer is finished.
- * This API should be called after HAL_SD_WriteBlocks_DMA() function
- * to insure that all data sent by the card is already transferred by the
- * DMA controller.
- * @param hsd: SD handle
- * @param Timeout: Timeout duration
- * @retval SD Card error state
- */
-HAL_SD_ErrorTypedef HAL_SD_CheckWriteOperation(SD_HandleTypeDef *hsd, uint32_t Timeout)
-{
- HAL_SD_ErrorTypedef errorstate = SD_OK;
- uint32_t timeout = Timeout;
- uint32_t tmp1, tmp2;
- HAL_SD_ErrorTypedef tmp3;
-
- /* Wait for DMA/SD transfer end or SD error variables to be in SD handle */
- tmp1 = hsd->DmaTransferCplt;
- tmp2 = hsd->SdTransferCplt;
- tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
-
- while ((tmp1 == 0) && (tmp2 == 0) && (tmp3 == SD_OK) && (timeout > 0))
- {
- tmp1 = hsd->DmaTransferCplt;
- tmp2 = hsd->SdTransferCplt;
- tmp3 = (HAL_SD_ErrorTypedef)hsd->SdTransferErr;
- timeout--;
- }
-
- timeout = Timeout;
-
- /* Wait until the Tx transfer is no longer active */
- while((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_TXACT)) && (timeout > 0))
- {
- timeout--;
- }
-
- /* Send stop command in multiblock write */
- if (hsd->SdOperation == SD_WRITE_MULTIPLE_BLOCK)
- {
- errorstate = HAL_SD_StopTransfer(hsd);
- }
-
- if ((timeout == 0) && (errorstate == SD_OK))
- {
- errorstate = SD_DATA_TIMEOUT;
- }
-
- /* Clear all the static flags */
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
-
- /* Return error state */
- if (hsd->SdTransferErr != SD_OK)
- {
- return (HAL_SD_ErrorTypedef)(hsd->SdTransferErr);
- }
-
- /* Wait until write is complete */
- while(HAL_SD_GetStatus(hsd) != SD_TRANSFER_OK)
- {
- }
-
- return errorstate;
-}
-
-/**
- * @brief Erases the specified memory area of the given SD card.
- * @param hsd: SD handle
- * @param startaddr: Start byte address
- * @param endaddr: End byte address
- * @retval SD Card error state
- */
-HAL_SD_ErrorTypedef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint64_t startaddr, uint64_t endaddr)
-{
- HAL_SD_ErrorTypedef errorstate = SD_OK;
- SDIO_CmdInitTypeDef sdio_cmdinitstructure;
-
- uint32_t delay = 0;
- __IO uint32_t maxdelay = 0;
- uint8_t cardstate = 0;
-
- /* Check if the card command class supports erase command */
- if (((hsd->CSD[1] >> 20) & SD_CCCC_ERASE) == 0)
- {
- errorstate = SD_REQUEST_NOT_APPLICABLE;
-
- return errorstate;
- }
-
- /* Get max delay value */
- maxdelay = 120000 / (((hsd->Instance->CLKCR) & 0xFF) + 2);
-
- if((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
- {
- errorstate = SD_LOCK_UNLOCK_FAILED;
-
- return errorstate;
- }
-
- /* Get start and end block for high capacity cards */
- if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
- {
- startaddr /= 512;
- endaddr /= 512;
- }
-
- /* According to sd-card spec 1.0 ERASE_GROUP_START (CMD32) and erase_group_end(CMD33) */
- if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
- (hsd->CardType == HIGH_CAPACITY_SD_CARD))
- {
- /* Send CMD32 SD_ERASE_GRP_START with argument as addr */
- sdio_cmdinitstructure.Argument =(uint32_t)startaddr;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_ERASE_GRP_START;
- sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
- sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
- sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_ERASE_GRP_START);
-
- if (errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Send CMD33 SD_ERASE_GRP_END with argument as addr */
- sdio_cmdinitstructure.Argument = (uint32_t)endaddr;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_ERASE_GRP_END;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_ERASE_GRP_END);
-
- if (errorstate != SD_OK)
- {
- return errorstate;
- }
- }
-
- /* Send CMD38 ERASE */
- sdio_cmdinitstructure.Argument = 0;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_ERASE;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_ERASE);
-
- if (errorstate != SD_OK)
- {
- return errorstate;
- }
-
- for (; delay < maxdelay; delay++)
- {
- }
-
- /* Wait until the card is in programming state */
- errorstate = SD_IsCardProgramming(hsd, &cardstate);
-
- delay = SD_DATATIMEOUT;
-
- while ((delay > 0) && (errorstate == SD_OK) && ((cardstate == SD_CARD_PROGRAMMING) || (cardstate == SD_CARD_RECEIVING)))
- {
- errorstate = SD_IsCardProgramming(hsd, &cardstate);
- delay--;
- }
-
- return errorstate;
-}
-
-/**
- * @brief This function handles SD card interrupt request.
- * @param hsd: SD handle
- * @retval None
- */
-void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd)
-{
- /* Check for SDIO interrupt flags */
- if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_DATAEND))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_IT_DATAEND);
-
- /* SD transfer is complete */
- hsd->SdTransferCplt = 1;
-
- /* No transfer error */
- hsd->SdTransferErr = SD_OK;
-
- HAL_SD_XferCpltCallback(hsd);
- }
- else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_DCRCFAIL))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
-
- hsd->SdTransferErr = SD_DATA_CRC_FAIL;
-
- HAL_SD_XferErrorCallback(hsd);
-
- }
- else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_DTIMEOUT))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
-
- hsd->SdTransferErr = SD_DATA_TIMEOUT;
-
- HAL_SD_XferErrorCallback(hsd);
- }
- else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_RXOVERR))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
-
- hsd->SdTransferErr = SD_RX_OVERRUN;
-
- HAL_SD_XferErrorCallback(hsd);
- }
- else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_TXUNDERR))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_TXUNDERR);
-
- hsd->SdTransferErr = SD_TX_UNDERRUN;
-
- HAL_SD_XferErrorCallback(hsd);
- }
-#ifdef SDIO_STA_STBITERR
- else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_IT_STBITERR))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
-
- hsd->SdTransferErr = SD_START_BIT_ERR;
-
- HAL_SD_XferErrorCallback(hsd);
- }
-#endif /* SDIO_STA_STBITERR */
- else
- {
- /* No error flag set */
- }
-
- /* Disable all SDIO peripheral interrupt sources */
-#ifdef SDIO_STA_STBITERR
- __HAL_SD_SDIO_DISABLE_IT(hsd, SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND |\
- SDIO_IT_TXFIFOHE | SDIO_IT_RXFIFOHF | SDIO_IT_TXUNDERR |\
- SDIO_IT_RXOVERR | SDIO_IT_STBITERR);
-#else /* SDIO_STA_STBITERR not defined */
- __HAL_SD_SDIO_DISABLE_IT(hsd, SDIO_IT_DCRCFAIL | SDIO_IT_DTIMEOUT | SDIO_IT_DATAEND |\
- SDIO_IT_TXFIFOHE | SDIO_IT_RXFIFOHF | SDIO_IT_TXUNDERR |\
- SDIO_IT_RXOVERR);
-#endif /* SDIO_STA_STBITERR */
-}
-
-
-/**
- * @brief SD end of transfer callback.
- * @param hsd: SD handle
- * @retval None
- */
-__weak void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SD_XferCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief SD Transfer Error callback.
- * @param hsd: SD handle
- * @retval None
- */
-__weak void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SD_XferErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief SD Transfer complete Rx callback in non blocking mode.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-__weak void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SD_DMA_RxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief SD DMA transfer complete Rx error callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-__weak void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SD_DMA_RxErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief SD Transfer complete Tx callback in non blocking mode.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-__weak void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SD_DMA_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief SD DMA transfer complete error Tx callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-__weak void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SD_DMA_TxErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @addtogroup SD_Exported_Functions_Group3
- * @brief management functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral Control functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to control the SD card
- operations.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Returns information about specific card.
- * @param hsd: SD handle
- * @param pCardInfo: Pointer to a HAL_SD_CardInfoTypedef structure that
- * contains all SD cardinformation
- * @retval SD Card error state
- */
-HAL_SD_ErrorTypedef HAL_SD_Get_CardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *pCardInfo)
-{
- HAL_SD_ErrorTypedef errorstate = SD_OK;
- uint32_t tmp = 0;
-
- pCardInfo->CardType = (uint8_t)(hsd->CardType);
- pCardInfo->RCA = (uint16_t)(hsd->RCA);
-
- /* Byte 0 */
- tmp = (hsd->CSD[0] & 0xFF000000) >> 24;
- pCardInfo->SD_csd.CSDStruct = (uint8_t)((tmp & 0xC0) >> 6);
- pCardInfo->SD_csd.SysSpecVersion = (uint8_t)((tmp & 0x3C) >> 2);
- pCardInfo->SD_csd.Reserved1 = tmp & 0x03;
-
- /* Byte 1 */
- tmp = (hsd->CSD[0] & 0x00FF0000) >> 16;
- pCardInfo->SD_csd.TAAC = (uint8_t)tmp;
-
- /* Byte 2 */
- tmp = (hsd->CSD[0] & 0x0000FF00) >> 8;
- pCardInfo->SD_csd.NSAC = (uint8_t)tmp;
-
- /* Byte 3 */
- tmp = hsd->CSD[0] & 0x000000FF;
- pCardInfo->SD_csd.MaxBusClkFrec = (uint8_t)tmp;
-
- /* Byte 4 */
- tmp = (hsd->CSD[1] & 0xFF000000) >> 24;
- pCardInfo->SD_csd.CardComdClasses = (uint16_t)(tmp << 4);
-
- /* Byte 5 */
- tmp = (hsd->CSD[1] & 0x00FF0000) >> 16;
- pCardInfo->SD_csd.CardComdClasses |= (uint16_t)((tmp & 0xF0) >> 4);
- pCardInfo->SD_csd.RdBlockLen = (uint8_t)(tmp & 0x0F);
-
- /* Byte 6 */
- tmp = (hsd->CSD[1] & 0x0000FF00) >> 8;
- pCardInfo->SD_csd.PartBlockRead = (uint8_t)((tmp & 0x80) >> 7);
- pCardInfo->SD_csd.WrBlockMisalign = (uint8_t)((tmp & 0x40) >> 6);
- pCardInfo->SD_csd.RdBlockMisalign = (uint8_t)((tmp & 0x20) >> 5);
- pCardInfo->SD_csd.DSRImpl = (uint8_t)((tmp & 0x10) >> 4);
- pCardInfo->SD_csd.Reserved2 = 0; /*!< Reserved */
-
- if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0))
- {
- pCardInfo->SD_csd.DeviceSize = (tmp & 0x03) << 10;
-
- /* Byte 7 */
- tmp = (uint8_t)(hsd->CSD[1] & 0x000000FF);
- pCardInfo->SD_csd.DeviceSize |= (tmp) << 2;
-
- /* Byte 8 */
- tmp = (uint8_t)((hsd->CSD[2] & 0xFF000000) >> 24);
- pCardInfo->SD_csd.DeviceSize |= (tmp & 0xC0) >> 6;
-
- pCardInfo->SD_csd.MaxRdCurrentVDDMin = (tmp & 0x38) >> 3;
- pCardInfo->SD_csd.MaxRdCurrentVDDMax = (tmp & 0x07);
-
- /* Byte 9 */
- tmp = (uint8_t)((hsd->CSD[2] & 0x00FF0000) >> 16);
- pCardInfo->SD_csd.MaxWrCurrentVDDMin = (tmp & 0xE0) >> 5;
- pCardInfo->SD_csd.MaxWrCurrentVDDMax = (tmp & 0x1C) >> 2;
- pCardInfo->SD_csd.DeviceSizeMul = (tmp & 0x03) << 1;
- /* Byte 10 */
- tmp = (uint8_t)((hsd->CSD[2] & 0x0000FF00) >> 8);
- pCardInfo->SD_csd.DeviceSizeMul |= (tmp & 0x80) >> 7;
-
- pCardInfo->CardCapacity = (pCardInfo->SD_csd.DeviceSize + 1) ;
- pCardInfo->CardCapacity *= (1 << (pCardInfo->SD_csd.DeviceSizeMul + 2));
- pCardInfo->CardBlockSize = 1 << (pCardInfo->SD_csd.RdBlockLen);
- pCardInfo->CardCapacity *= pCardInfo->CardBlockSize;
- }
- else if (hsd->CardType == HIGH_CAPACITY_SD_CARD)
- {
- /* Byte 7 */
- tmp = (uint8_t)(hsd->CSD[1] & 0x000000FF);
- pCardInfo->SD_csd.DeviceSize = (tmp & 0x3F) << 16;
-
- /* Byte 8 */
- tmp = (uint8_t)((hsd->CSD[2] & 0xFF000000) >> 24);
-
- pCardInfo->SD_csd.DeviceSize |= (tmp << 8);
-
- /* Byte 9 */
- tmp = (uint8_t)((hsd->CSD[2] & 0x00FF0000) >> 16);
-
- pCardInfo->SD_csd.DeviceSize |= (tmp);
-
- /* Byte 10 */
- tmp = (uint8_t)((hsd->CSD[2] & 0x0000FF00) >> 8);
-
- pCardInfo->CardCapacity = (uint64_t)((((uint64_t)pCardInfo->SD_csd.DeviceSize + 1)) * 512 * 1024);
- pCardInfo->CardBlockSize = 512;
- }
- else
- {
- /* Not supported card type */
- errorstate = SD_ERROR;
- }
-
- pCardInfo->SD_csd.EraseGrSize = (tmp & 0x40) >> 6;
- pCardInfo->SD_csd.EraseGrMul = (tmp & 0x3F) << 1;
-
- /* Byte 11 */
- tmp = (uint8_t)(hsd->CSD[2] & 0x000000FF);
- pCardInfo->SD_csd.EraseGrMul |= (tmp & 0x80) >> 7;
- pCardInfo->SD_csd.WrProtectGrSize = (tmp & 0x7F);
-
- /* Byte 12 */
- tmp = (uint8_t)((hsd->CSD[3] & 0xFF000000) >> 24);
- pCardInfo->SD_csd.WrProtectGrEnable = (tmp & 0x80) >> 7;
- pCardInfo->SD_csd.ManDeflECC = (tmp & 0x60) >> 5;
- pCardInfo->SD_csd.WrSpeedFact = (tmp & 0x1C) >> 2;
- pCardInfo->SD_csd.MaxWrBlockLen = (tmp & 0x03) << 2;
-
- /* Byte 13 */
- tmp = (uint8_t)((hsd->CSD[3] & 0x00FF0000) >> 16);
- pCardInfo->SD_csd.MaxWrBlockLen |= (tmp & 0xC0) >> 6;
- pCardInfo->SD_csd.WriteBlockPaPartial = (tmp & 0x20) >> 5;
- pCardInfo->SD_csd.Reserved3 = 0;
- pCardInfo->SD_csd.ContentProtectAppli = (tmp & 0x01);
-
- /* Byte 14 */
- tmp = (uint8_t)((hsd->CSD[3] & 0x0000FF00) >> 8);
- pCardInfo->SD_csd.FileFormatGrouop = (tmp & 0x80) >> 7;
- pCardInfo->SD_csd.CopyFlag = (tmp & 0x40) >> 6;
- pCardInfo->SD_csd.PermWrProtect = (tmp & 0x20) >> 5;
- pCardInfo->SD_csd.TempWrProtect = (tmp & 0x10) >> 4;
- pCardInfo->SD_csd.FileFormat = (tmp & 0x0C) >> 2;
- pCardInfo->SD_csd.ECC = (tmp & 0x03);
-
- /* Byte 15 */
- tmp = (uint8_t)(hsd->CSD[3] & 0x000000FF);
- pCardInfo->SD_csd.CSD_CRC = (tmp & 0xFE) >> 1;
- pCardInfo->SD_csd.Reserved4 = 1;
-
- /* Byte 0 */
- tmp = (uint8_t)((hsd->CID[0] & 0xFF000000) >> 24);
- pCardInfo->SD_cid.ManufacturerID = tmp;
-
- /* Byte 1 */
- tmp = (uint8_t)((hsd->CID[0] & 0x00FF0000) >> 16);
- pCardInfo->SD_cid.OEM_AppliID = tmp << 8;
-
- /* Byte 2 */
- tmp = (uint8_t)((hsd->CID[0] & 0x000000FF00) >> 8);
- pCardInfo->SD_cid.OEM_AppliID |= tmp;
-
- /* Byte 3 */
- tmp = (uint8_t)(hsd->CID[0] & 0x000000FF);
- pCardInfo->SD_cid.ProdName1 = tmp << 24;
-
- /* Byte 4 */
- tmp = (uint8_t)((hsd->CID[1] & 0xFF000000) >> 24);
- pCardInfo->SD_cid.ProdName1 |= tmp << 16;
-
- /* Byte 5 */
- tmp = (uint8_t)((hsd->CID[1] & 0x00FF0000) >> 16);
- pCardInfo->SD_cid.ProdName1 |= tmp << 8;
-
- /* Byte 6 */
- tmp = (uint8_t)((hsd->CID[1] & 0x0000FF00) >> 8);
- pCardInfo->SD_cid.ProdName1 |= tmp;
-
- /* Byte 7 */
- tmp = (uint8_t)(hsd->CID[1] & 0x000000FF);
- pCardInfo->SD_cid.ProdName2 = tmp;
-
- /* Byte 8 */
- tmp = (uint8_t)((hsd->CID[2] & 0xFF000000) >> 24);
- pCardInfo->SD_cid.ProdRev = tmp;
-
- /* Byte 9 */
- tmp = (uint8_t)((hsd->CID[2] & 0x00FF0000) >> 16);
- pCardInfo->SD_cid.ProdSN = tmp << 24;
-
- /* Byte 10 */
- tmp = (uint8_t)((hsd->CID[2] & 0x0000FF00) >> 8);
- pCardInfo->SD_cid.ProdSN |= tmp << 16;
-
- /* Byte 11 */
- tmp = (uint8_t)(hsd->CID[2] & 0x000000FF);
- pCardInfo->SD_cid.ProdSN |= tmp << 8;
-
- /* Byte 12 */
- tmp = (uint8_t)((hsd->CID[3] & 0xFF000000) >> 24);
- pCardInfo->SD_cid.ProdSN |= tmp;
-
- /* Byte 13 */
- tmp = (uint8_t)((hsd->CID[3] & 0x00FF0000) >> 16);
- pCardInfo->SD_cid.Reserved1 |= (tmp & 0xF0) >> 4;
- pCardInfo->SD_cid.ManufactDate = (tmp & 0x0F) << 8;
-
- /* Byte 14 */
- tmp = (uint8_t)((hsd->CID[3] & 0x0000FF00) >> 8);
- pCardInfo->SD_cid.ManufactDate |= tmp;
-
- /* Byte 15 */
- tmp = (uint8_t)(hsd->CID[3] & 0x000000FF);
- pCardInfo->SD_cid.CID_CRC = (tmp & 0xFE) >> 1;
- pCardInfo->SD_cid.Reserved2 = 1;
-
- return errorstate;
-}
-
-/**
- * @brief Enables wide bus operation for the requested card if supported by
- * card.
- * @param hsd: SD handle
- * @param WideMode: Specifies the SD card wide bus mode
- * This parameter can be one of the following values:
- * @arg SDIO_BUS_WIDE_8B: 8-bit data transfer (Only for MMC)
- * @arg SDIO_BUS_WIDE_4B: 4-bit data transfer
- * @arg SDIO_BUS_WIDE_1B: 1-bit data transfer
- * @retval SD Card error state
- */
-HAL_SD_ErrorTypedef HAL_SD_WideBusOperation_Config(SD_HandleTypeDef *hsd, uint32_t WideMode)
-{
- HAL_SD_ErrorTypedef errorstate = SD_OK;
- SDIO_InitTypeDef tmpinit;
-
- /* MMC Card does not support this feature */
- if (hsd->CardType == MULTIMEDIA_CARD)
- {
- errorstate = SD_UNSUPPORTED_FEATURE;
-
- return errorstate;
- }
- else if ((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
- (hsd->CardType == HIGH_CAPACITY_SD_CARD))
- {
- if (WideMode == SDIO_BUS_WIDE_8B)
- {
- errorstate = SD_UNSUPPORTED_FEATURE;
- }
- else if (WideMode == SDIO_BUS_WIDE_4B)
- {
- errorstate = SD_WideBus_Enable(hsd);
- }
- else if (WideMode == SDIO_BUS_WIDE_1B)
- {
- errorstate = SD_WideBus_Disable(hsd);
- }
- else
- {
- /* WideMode is not a valid argument*/
- errorstate = SD_INVALID_PARAMETER;
- }
-
- if (errorstate == SD_OK)
- {
- /* Configure the SDIO peripheral */
- tmpinit.ClockEdge = hsd->Init.ClockEdge;
- tmpinit.ClockBypass = hsd->Init.ClockBypass;
- tmpinit.ClockPowerSave = hsd->Init.ClockPowerSave;
- tmpinit.BusWide = WideMode;
- tmpinit.HardwareFlowControl = hsd->Init.HardwareFlowControl;
- tmpinit.ClockDiv = hsd->Init.ClockDiv;
- SDIO_Init(hsd->Instance, tmpinit);
- }
- }
-
- return errorstate;
-}
-
-/**
- * @brief Aborts an ongoing data transfer.
- * @param hsd: SD handle
- * @retval SD Card error state
- */
-HAL_SD_ErrorTypedef HAL_SD_StopTransfer(SD_HandleTypeDef *hsd)
-{
- SDIO_CmdInitTypeDef sdio_cmdinitstructure;
- HAL_SD_ErrorTypedef errorstate = SD_OK;
-
- /* Send CMD12 STOP_TRANSMISSION */
- sdio_cmdinitstructure.Argument = 0;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_STOP_TRANSMISSION;
- sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
- sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
- sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_STOP_TRANSMISSION);
-
- return errorstate;
-}
-
-/**
- * @brief Switches the SD card to High Speed mode.
- * This API must be used after "Transfer State"
- * @note This operation should be followed by the configuration
- * of PLL to have SDIOCK clock between 67 and 75 MHz
- * @param hsd: SD handle
- * @retval SD Card error state
- */
-HAL_SD_ErrorTypedef HAL_SD_HighSpeed (SD_HandleTypeDef *hsd)
-{
- HAL_SD_ErrorTypedef errorstate = SD_OK;
- SDIO_CmdInitTypeDef sdio_cmdinitstructure;
- SDIO_DataInitTypeDef sdio_datainitstructure;
-
- uint8_t SD_hs[64] = {0};
- uint32_t SD_scr[2] = {0, 0};
- uint32_t SD_SPEC = 0 ;
- uint32_t count = 0, *tempbuff = (uint32_t *)SD_hs;
-
- /* Initialize the Data control register */
- hsd->Instance->DCTRL = 0;
-
- /* Get SCR Register */
- errorstate = SD_FindSCR(hsd, SD_scr);
-
- if (errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Test the Version supported by the card*/
- SD_SPEC = (SD_scr[1] & 0x01000000) | (SD_scr[1] & 0x02000000);
-
- if (SD_SPEC != SD_ALLZERO)
- {
- /* Set Block Size for Card */
- sdio_cmdinitstructure.Argument = (uint32_t)64;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
- sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
- sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
- sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
-
- if (errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Configure the SD DPSM (Data Path State Machine) */
- sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
- sdio_datainitstructure.DataLength = 64;
- sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_64B ;
- sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
- sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
- sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
- SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
-
- /* Send CMD6 switch mode */
- sdio_cmdinitstructure.Argument = 0x80FFFF01;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_HS_SWITCH;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_HS_SWITCH);
-
- if (errorstate != SD_OK)
- {
- return errorstate;
- }
-#ifdef SDIO_STA_STBITERR
- while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
-#else /* SDIO_STA_STBITERR */
- while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
-#endif /* SDIO_STA_STBITERR */
- {
- if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF))
- {
- for (count = 0; count < 8; count++)
- {
- *(tempbuff + count) = SDIO_ReadFIFO(hsd->Instance);
- }
-
- tempbuff += 8;
- }
- }
-
- if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
-
- errorstate = SD_DATA_TIMEOUT;
-
- return errorstate;
- }
- else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
-
- errorstate = SD_DATA_CRC_FAIL;
-
- return errorstate;
- }
- else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
-
- errorstate = SD_RX_OVERRUN;
-
- return errorstate;
- }
-#ifdef SDIO_STA_STBITERR
- else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
-
- errorstate = SD_START_BIT_ERR;
-
- return errorstate;
- }
-#endif /* SDIO_STA_STBITERR */
- else
- {
- /* No error flag set */
- }
-
- count = SD_DATATIMEOUT;
-
- while ((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (count > 0))
- {
- *tempbuff = SDIO_ReadFIFO(hsd->Instance);
- tempbuff++;
- count--;
- }
-
- /* Clear all the static flags */
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
-
- /* Test if the switch mode HS is ok */
- if ((SD_hs[13]& 2) != 2)
- {
- errorstate = SD_UNSUPPORTED_FEATURE;
- }
- }
-
- return errorstate;
-}
-
-/**
- * @}
- */
-
-/** @addtogroup SD_Exported_Functions_Group4
- * @brief Peripheral State functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral State functions #####
- ==============================================================================
- [..]
- This subsection permits to get in runtime the status of the peripheral
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Returns the current SD card's status.
- * @param hsd: SD handle
- * @param pSDstatus: Pointer to the buffer that will contain the SD card status
- * SD Status register)
- * @retval SD Card error state
- */
-HAL_SD_ErrorTypedef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus)
-{
- SDIO_CmdInitTypeDef sdio_cmdinitstructure;
- SDIO_DataInitTypeDef sdio_datainitstructure;
- HAL_SD_ErrorTypedef errorstate = SD_OK;
- uint32_t count = 0;
-
- /* Check SD response */
- if ((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
- {
- errorstate = SD_LOCK_UNLOCK_FAILED;
-
- return errorstate;
- }
-
- /* Set block size for card if it is not equal to current block size for card */
- sdio_cmdinitstructure.Argument = 64;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
- sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
- sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
- sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
-
- if (errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Send CMD55 */
- sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16);
- sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
-
- if (errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Configure the SD DPSM (Data Path State Machine) */
- sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
- sdio_datainitstructure.DataLength = 64;
- sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_64B;
- sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
- sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
- sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
- SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
-
- /* Send ACMD13 (SD_APP_STATUS) with argument as card's RCA */
- sdio_cmdinitstructure.Argument = 0;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_APP_STATUS;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_APP_STATUS);
-
- if (errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Get status data */
-#ifdef SDIO_STA_STBITERR
- while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
-#else /* SDIO_STA_STBITERR not defined */
- while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
-#endif /* SDIO_STA_STBITERR */
- {
- if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXFIFOHF))
- {
- for (count = 0; count < 8; count++)
- {
- *(pSDstatus + count) = SDIO_ReadFIFO(hsd->Instance);
- }
-
- pSDstatus += 8;
- }
- }
-
- if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
-
- errorstate = SD_DATA_TIMEOUT;
-
- return errorstate;
- }
- else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
-
- errorstate = SD_DATA_CRC_FAIL;
-
- return errorstate;
- }
- else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
-
- errorstate = SD_RX_OVERRUN;
-
- return errorstate;
- }
-#ifdef SDIO_STA_STBITERR
- else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
-
- errorstate = SD_START_BIT_ERR;
-
- return errorstate;
- }
-#endif /* SDIO_STA_STBITERR */
- else
- {
- /* No error flag set */
- }
-
- count = SD_DATATIMEOUT;
- while ((__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL)) && (count > 0))
- {
- *pSDstatus = SDIO_ReadFIFO(hsd->Instance);
- pSDstatus++;
- count--;
- }
-
- /* Clear all the static status flags*/
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
-
- return errorstate;
-}
-
-/**
- * @brief Gets the current sd card data status.
- * @param hsd: SD handle
- * @retval Data Transfer state
- */
-HAL_SD_TransferStateTypedef HAL_SD_GetStatus(SD_HandleTypeDef *hsd)
-{
- HAL_SD_CardStateTypedef cardstate = SD_CARD_TRANSFER;
-
- /* Get SD card state */
- cardstate = SD_GetState(hsd);
-
- /* Find SD status according to card state*/
- if (cardstate == SD_CARD_TRANSFER)
- {
- return SD_TRANSFER_OK;
- }
- else if(cardstate == SD_CARD_ERROR)
- {
- return SD_TRANSFER_ERROR;
- }
- else
- {
- return SD_TRANSFER_BUSY;
- }
-}
-
-/**
- * @brief Gets the SD card status.
- * @param hsd: SD handle
- * @param pCardStatus: Pointer to the HAL_SD_CardStatusTypedef structure that
- * will contain the SD card status information
- * @retval SD Card error state
- */
-HAL_SD_ErrorTypedef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pCardStatus)
-{
- HAL_SD_ErrorTypedef errorstate = SD_OK;
- uint32_t tmp = 0;
- uint32_t sd_status[16];
-
- errorstate = HAL_SD_SendSDStatus(hsd, sd_status);
-
- if (errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Byte 0 */
- tmp = (sd_status[0] & 0xC0) >> 6;
- pCardStatus->DAT_BUS_WIDTH = (uint8_t)tmp;
-
- /* Byte 0 */
- tmp = (sd_status[0] & 0x20) >> 5;
- pCardStatus->SECURED_MODE = (uint8_t)tmp;
-
- /* Byte 2 */
- tmp = (sd_status[2] & 0xFF);
- pCardStatus->SD_CARD_TYPE = (uint8_t)(tmp << 8);
-
- /* Byte 3 */
- tmp = (sd_status[3] & 0xFF);
- pCardStatus->SD_CARD_TYPE |= (uint8_t)tmp;
-
- /* Byte 4 */
- tmp = (sd_status[4] & 0xFF);
- pCardStatus->SIZE_OF_PROTECTED_AREA = (uint8_t)(tmp << 24);
-
- /* Byte 5 */
- tmp = (sd_status[5] & 0xFF);
- pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)(tmp << 16);
-
- /* Byte 6 */
- tmp = (sd_status[6] & 0xFF);
- pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)(tmp << 8);
-
- /* Byte 7 */
- tmp = (sd_status[7] & 0xFF);
- pCardStatus->SIZE_OF_PROTECTED_AREA |= (uint8_t)tmp;
-
- /* Byte 8 */
- tmp = (sd_status[8] & 0xFF);
- pCardStatus->SPEED_CLASS = (uint8_t)tmp;
-
- /* Byte 9 */
- tmp = (sd_status[9] & 0xFF);
- pCardStatus->PERFORMANCE_MOVE = (uint8_t)tmp;
-
- /* Byte 10 */
- tmp = (sd_status[10] & 0xF0) >> 4;
- pCardStatus->AU_SIZE = (uint8_t)tmp;
-
- /* Byte 11 */
- tmp = (sd_status[11] & 0xFF);
- pCardStatus->ERASE_SIZE = (uint8_t)(tmp << 8);
-
- /* Byte 12 */
- tmp = (sd_status[12] & 0xFF);
- pCardStatus->ERASE_SIZE |= (uint8_t)tmp;
-
- /* Byte 13 */
- tmp = (sd_status[13] & 0xFC) >> 2;
- pCardStatus->ERASE_TIMEOUT = (uint8_t)tmp;
-
- /* Byte 13 */
- tmp = (sd_status[13] & 0x3);
- pCardStatus->ERASE_OFFSET = (uint8_t)tmp;
-
- return errorstate;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/* Private function ----------------------------------------------------------*/
-/** @addtogroup SD_Private_Functions
- * @{
- */
-
-/**
- * @brief SD DMA transfer complete Rx callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void SD_DMA_RxCplt(DMA_HandleTypeDef *hdma)
-{
- SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- /* DMA transfer is complete */
- hsd->DmaTransferCplt = 1;
-
- /* Wait until SD transfer is complete */
- while(hsd->SdTransferCplt == 0)
- {
- }
-
- /* Disable the DMA channel */
- HAL_DMA_Abort(hdma);
-
- /* Transfer complete user callback */
- HAL_SD_DMA_RxCpltCallback(hsd->hdmarx);
-}
-
-/**
- * @brief SD DMA transfer Error Rx callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void SD_DMA_RxError(DMA_HandleTypeDef *hdma)
-{
- SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- /* Transfer complete user callback */
- HAL_SD_DMA_RxErrorCallback(hsd->hdmarx);
-}
-
-/**
- * @brief SD DMA transfer complete Tx callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void SD_DMA_TxCplt(DMA_HandleTypeDef *hdma)
-{
- SD_HandleTypeDef *hsd = (SD_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- /* DMA transfer is complete */
- hsd->DmaTransferCplt = 1;
-
- /* Wait until SD transfer is complete */
- while(hsd->SdTransferCplt == 0)
- {
- }
-
- /* Disable the DMA channel */
- HAL_DMA_Abort(hdma);
-
- /* Transfer complete user callback */
- HAL_SD_DMA_TxCpltCallback(hsd->hdmatx);
-}
-
-/**
- * @brief SD DMA transfer Error Tx callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void SD_DMA_TxError(DMA_HandleTypeDef *hdma)
-{
- SD_HandleTypeDef *hsd = ( SD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- /* Transfer complete user callback */
- HAL_SD_DMA_TxErrorCallback(hsd->hdmatx);
-}
-
-/**
- * @brief Returns the SD current state.
- * @param hsd: SD handle
- * @retval SD card current state
- */
-static HAL_SD_CardStateTypedef SD_GetState(SD_HandleTypeDef *hsd)
-{
- uint32_t resp1 = 0;
-
- if (SD_SendStatus(hsd, &resp1) != SD_OK)
- {
- return SD_CARD_ERROR;
- }
- else
- {
- return (HAL_SD_CardStateTypedef)((resp1 >> 9) & 0x0F);
- }
-}
-
-/**
- * @brief Initializes all cards or single card as the case may be Card(s) come
- * into standby state.
- * @param hsd: SD handle
- * @retval SD Card error state
- */
-static HAL_SD_ErrorTypedef SD_Initialize_Cards(SD_HandleTypeDef *hsd)
-{
- SDIO_CmdInitTypeDef sdio_cmdinitstructure;
- HAL_SD_ErrorTypedef errorstate = SD_OK;
- uint16_t sd_rca = 1;
-
- if(SDIO_GetPowerState(hsd->Instance) == 0) /* Power off */
- {
- errorstate = SD_REQUEST_NOT_APPLICABLE;
-
- return errorstate;
- }
-
- if(hsd->CardType != SECURE_DIGITAL_IO_CARD)
- {
- /* Send CMD2 ALL_SEND_CID */
- sdio_cmdinitstructure.Argument = 0;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_ALL_SEND_CID;
- sdio_cmdinitstructure.Response = SDIO_RESPONSE_LONG;
- sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
- sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp2Error(hsd);
-
- if(errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Get Card identification number data */
- hsd->CID[0] = SDIO_GetResponse(SDIO_RESP1);
- hsd->CID[1] = SDIO_GetResponse(SDIO_RESP2);
- hsd->CID[2] = SDIO_GetResponse(SDIO_RESP3);
- hsd->CID[3] = SDIO_GetResponse(SDIO_RESP4);
- }
-
- if((hsd->CardType == STD_CAPACITY_SD_CARD_V1_1) || (hsd->CardType == STD_CAPACITY_SD_CARD_V2_0) ||\
- (hsd->CardType == SECURE_DIGITAL_IO_COMBO_CARD) || (hsd->CardType == HIGH_CAPACITY_SD_CARD))
- {
- /* Send CMD3 SET_REL_ADDR with argument 0 */
- /* SD Card publishes its RCA. */
- sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_REL_ADDR;
- sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp6Error(hsd, SD_CMD_SET_REL_ADDR, &sd_rca);
-
- if(errorstate != SD_OK)
- {
- return errorstate;
- }
- }
-
- if (hsd->CardType != SECURE_DIGITAL_IO_CARD)
- {
- /* Get the SD card RCA */
- hsd->RCA = sd_rca;
-
- /* Send CMD9 SEND_CSD with argument as card's RCA */
- sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16);
- sdio_cmdinitstructure.CmdIndex = SD_CMD_SEND_CSD;
- sdio_cmdinitstructure.Response = SDIO_RESPONSE_LONG;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp2Error(hsd);
-
- if(errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Get Card Specific Data */
- hsd->CSD[0] = SDIO_GetResponse(SDIO_RESP1);
- hsd->CSD[1] = SDIO_GetResponse(SDIO_RESP2);
- hsd->CSD[2] = SDIO_GetResponse(SDIO_RESP3);
- hsd->CSD[3] = SDIO_GetResponse(SDIO_RESP4);
- }
-
- /* All cards are initialized */
- return errorstate;
-}
-
-/**
- * @brief Selects of Deselects the corresponding card.
- * @param hsd: SD handle
- * @param addr: Address of the card to be selected
- * @retval SD Card error state
- */
-static HAL_SD_ErrorTypedef SD_Select_Deselect(SD_HandleTypeDef *hsd, uint64_t addr)
-{
- SDIO_CmdInitTypeDef sdio_cmdinitstructure;
- HAL_SD_ErrorTypedef errorstate = SD_OK;
-
- /* Send CMD7 SDIO_SEL_DESEL_CARD */
- sdio_cmdinitstructure.Argument = (uint32_t)addr;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_SEL_DESEL_CARD;
- sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
- sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
- sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_SEL_DESEL_CARD);
-
- return errorstate;
-}
-
-/**
- * @brief Enquires cards about their operating voltage and configures clock
- * controls and stores SD information that will be needed in future
- * in the SD handle.
- * @param hsd: SD handle
- * @retval SD Card error state
- */
-static HAL_SD_ErrorTypedef SD_PowerON(SD_HandleTypeDef *hsd)
-{
- SDIO_CmdInitTypeDef sdio_cmdinitstructure;
- __IO HAL_SD_ErrorTypedef errorstate = SD_OK;
- uint32_t response = 0, count = 0, validvoltage = 0;
- uint32_t sdtype = SD_STD_CAPACITY;
-
- /* Power ON Sequence -------------------------------------------------------*/
- /* Disable SDIO Clock */
- __HAL_SD_SDIO_DISABLE();
-
- /* Set Power State to ON */
- SDIO_PowerState_ON(hsd->Instance);
-
- /* 1ms: required power up waiting time before starting the SD initialization
- sequence */
- HAL_Delay(1);
-
- /* Enable SDIO Clock */
- __HAL_SD_SDIO_ENABLE();
-
- /* CMD0: GO_IDLE_STATE -----------------------------------------------------*/
- /* No CMD response required */
- sdio_cmdinitstructure.Argument = 0;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_GO_IDLE_STATE;
- sdio_cmdinitstructure.Response = SDIO_RESPONSE_NO;
- sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
- sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdError(hsd);
-
- if(errorstate != SD_OK)
- {
- /* CMD Response Timeout (wait for CMDSENT flag) */
- return errorstate;
- }
-
- /* CMD8: SEND_IF_COND ------------------------------------------------------*/
- /* Send CMD8 to verify SD card interface operating condition */
- /* Argument: - [31:12]: Reserved (shall be set to '0')
- - [11:8]: Supply Voltage (VHS) 0x1 (Range: 2.7-3.6 V)
- - [7:0]: Check Pattern (recommended 0xAA) */
- /* CMD Response: R7 */
- sdio_cmdinitstructure.Argument = SD_CHECK_PATTERN;
- sdio_cmdinitstructure.CmdIndex = SD_SDIO_SEND_IF_COND;
- sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp7Error(hsd);
-
- if (errorstate == SD_OK)
- {
- /* SD Card 2.0 */
- hsd->CardType = STD_CAPACITY_SD_CARD_V2_0;
- sdtype = SD_HIGH_CAPACITY;
- }
-
- /* Send CMD55 */
- sdio_cmdinitstructure.Argument = 0;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
-
- /* If errorstate is Command Timeout, it is a MMC card */
- /* If errorstate is SD_OK it is a SD card: SD card 2.0 (voltage range mismatch)
- or SD card 1.x */
- if(errorstate == SD_OK)
- {
- /* SD CARD */
- /* Send ACMD41 SD_APP_OP_COND with Argument 0x80100000 */
- while((!validvoltage) && (count < SD_MAX_VOLT_TRIAL))
- {
-
- /* SEND CMD55 APP_CMD with RCA as 0 */
- sdio_cmdinitstructure.Argument = 0;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
- sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
- sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
- sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
-
- if(errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Send CMD41 */
- sdio_cmdinitstructure.Argument = SD_VOLTAGE_WINDOW_SD | sdtype;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_APP_OP_COND;
- sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
- sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
- sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp3Error(hsd);
-
- if(errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Get command response */
- response = SDIO_GetResponse(SDIO_RESP1);
-
- /* Get operating voltage*/
- validvoltage = (((response >> 31) == 1) ? 1 : 0);
-
- count++;
- }
-
- if(count >= SD_MAX_VOLT_TRIAL)
- {
- errorstate = SD_INVALID_VOLTRANGE;
-
- return errorstate;
- }
-
- if((response & SD_HIGH_CAPACITY) == SD_HIGH_CAPACITY) /* (response &= SD_HIGH_CAPACITY) */
- {
- hsd->CardType = HIGH_CAPACITY_SD_CARD;
- }
-
- } /* else MMC Card */
-
- return errorstate;
-}
-
-/**
- * @brief Turns the SDIO output signals off.
- * @param hsd: SD handle
- * @retval SD Card error state
- */
-static HAL_SD_ErrorTypedef SD_PowerOFF(SD_HandleTypeDef *hsd)
-{
- HAL_SD_ErrorTypedef errorstate = SD_OK;
-
- /* Set Power State to OFF */
- SDIO_PowerState_OFF(hsd->Instance);
-
- return errorstate;
-}
-
-/**
- * @brief Returns the current card's status.
- * @param hsd: SD handle
- * @param pCardStatus: pointer to the buffer that will contain the SD card
- * status (Card Status register)
- * @retval SD Card error state
- */
-static HAL_SD_ErrorTypedef SD_SendStatus(SD_HandleTypeDef *hsd, uint32_t *pCardStatus)
-{
- SDIO_CmdInitTypeDef sdio_cmdinitstructure;
- HAL_SD_ErrorTypedef errorstate = SD_OK;
-
- if(pCardStatus == NULL)
- {
- errorstate = SD_INVALID_PARAMETER;
-
- return errorstate;
- }
-
- /* Send Status command */
- sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16);
- sdio_cmdinitstructure.CmdIndex = SD_CMD_SEND_STATUS;
- sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
- sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
- sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_SEND_STATUS);
-
- if(errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Get SD card status */
- *pCardStatus = SDIO_GetResponse(SDIO_RESP1);
-
- return errorstate;
-}
-
-/**
- * @brief Checks for error conditions for CMD0.
- * @param hsd: SD handle
- * @retval SD Card error state
- */
-static HAL_SD_ErrorTypedef SD_CmdError(SD_HandleTypeDef *hsd)
-{
- HAL_SD_ErrorTypedef errorstate = SD_OK;
- uint32_t timeout, tmp;
-
- timeout = SDIO_CMD0TIMEOUT;
-
- tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CMDSENT);
-
- while((timeout > 0) && (!tmp))
- {
- tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CMDSENT);
- timeout--;
- }
-
- if(timeout == 0)
- {
- errorstate = SD_CMD_RSP_TIMEOUT;
- return errorstate;
- }
-
- /* Clear all the static flags */
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
-
- return errorstate;
-}
-
-/**
- * @brief Checks for error conditions for R7 response.
- * @param hsd: SD handle
- * @retval SD Card error state
- */
-static HAL_SD_ErrorTypedef SD_CmdResp7Error(SD_HandleTypeDef *hsd)
-{
- HAL_SD_ErrorTypedef errorstate = SD_ERROR;
- uint32_t timeout = SDIO_CMD0TIMEOUT, tmp;
-
- tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT);
-
- while((!tmp) && (timeout > 0))
- {
- tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT);
- timeout--;
- }
-
- tmp = __HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
-
- if((timeout == 0) || tmp)
- {
- /* Card is not V2.0 compliant or card does not support the set voltage range */
- errorstate = SD_CMD_RSP_TIMEOUT;
-
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
-
- return errorstate;
- }
-
- if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CMDREND))
- {
- /* Card is SD V2.0 compliant */
- errorstate = SD_OK;
-
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CMDREND);
-
- return errorstate;
- }
-
- return errorstate;
-}
-
-/**
- * @brief Checks for error conditions for R1 response.
- * @param hsd: SD handle
- * @param SD_CMD: The sent command index
- * @retval SD Card error state
- */
-static HAL_SD_ErrorTypedef SD_CmdResp1Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD)
-{
- HAL_SD_ErrorTypedef errorstate = SD_OK;
- uint32_t response_r1;
-
- while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
- {
- }
-
- if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
- {
- errorstate = SD_CMD_RSP_TIMEOUT;
-
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
-
- return errorstate;
- }
- else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL))
- {
- errorstate = SD_CMD_CRC_FAIL;
-
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL);
-
- return errorstate;
- }
-
- /* Check response received is of desired command */
- if(SDIO_GetCommandResponse(hsd->Instance) != SD_CMD)
- {
- errorstate = SD_ILLEGAL_CMD;
-
- return errorstate;
- }
-
- /* Clear all the static flags */
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
-
- /* We have received response, retrieve it for analysis */
- response_r1 = SDIO_GetResponse(SDIO_RESP1);
-
- if((response_r1 & SD_OCR_ERRORBITS) == SD_ALLZERO)
- {
- return errorstate;
- }
-
- if((response_r1 & SD_OCR_ADDR_OUT_OF_RANGE) == SD_OCR_ADDR_OUT_OF_RANGE)
- {
- return(SD_ADDR_OUT_OF_RANGE);
- }
-
- if((response_r1 & SD_OCR_ADDR_MISALIGNED) == SD_OCR_ADDR_MISALIGNED)
- {
- return(SD_ADDR_MISALIGNED);
- }
-
- if((response_r1 & SD_OCR_BLOCK_LEN_ERR) == SD_OCR_BLOCK_LEN_ERR)
- {
- return(SD_BLOCK_LEN_ERR);
- }
-
- if((response_r1 & SD_OCR_ERASE_SEQ_ERR) == SD_OCR_ERASE_SEQ_ERR)
- {
- return(SD_ERASE_SEQ_ERR);
- }
-
- if((response_r1 & SD_OCR_BAD_ERASE_PARAM) == SD_OCR_BAD_ERASE_PARAM)
- {
- return(SD_BAD_ERASE_PARAM);
- }
-
- if((response_r1 & SD_OCR_WRITE_PROT_VIOLATION) == SD_OCR_WRITE_PROT_VIOLATION)
- {
- return(SD_WRITE_PROT_VIOLATION);
- }
-
- if((response_r1 & SD_OCR_LOCK_UNLOCK_FAILED) == SD_OCR_LOCK_UNLOCK_FAILED)
- {
- return(SD_LOCK_UNLOCK_FAILED);
- }
-
- if((response_r1 & SD_OCR_COM_CRC_FAILED) == SD_OCR_COM_CRC_FAILED)
- {
- return(SD_COM_CRC_FAILED);
- }
-
- if((response_r1 & SD_OCR_ILLEGAL_CMD) == SD_OCR_ILLEGAL_CMD)
- {
- return(SD_ILLEGAL_CMD);
- }
-
- if((response_r1 & SD_OCR_CARD_ECC_FAILED) == SD_OCR_CARD_ECC_FAILED)
- {
- return(SD_CARD_ECC_FAILED);
- }
-
- if((response_r1 & SD_OCR_CC_ERROR) == SD_OCR_CC_ERROR)
- {
- return(SD_CC_ERROR);
- }
-
- if((response_r1 & SD_OCR_GENERAL_UNKNOWN_ERROR) == SD_OCR_GENERAL_UNKNOWN_ERROR)
- {
- return(SD_GENERAL_UNKNOWN_ERROR);
- }
-
- if((response_r1 & SD_OCR_STREAM_READ_UNDERRUN) == SD_OCR_STREAM_READ_UNDERRUN)
- {
- return(SD_STREAM_READ_UNDERRUN);
- }
-
- if((response_r1 & SD_OCR_STREAM_WRITE_OVERRUN) == SD_OCR_STREAM_WRITE_OVERRUN)
- {
- return(SD_STREAM_WRITE_OVERRUN);
- }
-
- if((response_r1 & SD_OCR_CID_CSD_OVERWRITE) == SD_OCR_CID_CSD_OVERWRITE)
- {
- return(SD_CID_CSD_OVERWRITE);
- }
-
- if((response_r1 & SD_OCR_WP_ERASE_SKIP) == SD_OCR_WP_ERASE_SKIP)
- {
- return(SD_WP_ERASE_SKIP);
- }
-
- if((response_r1 & SD_OCR_CARD_ECC_DISABLED) == SD_OCR_CARD_ECC_DISABLED)
- {
- return(SD_CARD_ECC_DISABLED);
- }
-
- if((response_r1 & SD_OCR_ERASE_RESET) == SD_OCR_ERASE_RESET)
- {
- return(SD_ERASE_RESET);
- }
-
- if((response_r1 & SD_OCR_AKE_SEQ_ERROR) == SD_OCR_AKE_SEQ_ERROR)
- {
- return(SD_AKE_SEQ_ERROR);
- }
-
- return errorstate;
-}
-
-/**
- * @brief Checks for error conditions for R3 (OCR) response.
- * @param hsd: SD handle
- * @retval SD Card error state
- */
-static HAL_SD_ErrorTypedef SD_CmdResp3Error(SD_HandleTypeDef *hsd)
-{
- HAL_SD_ErrorTypedef errorstate = SD_OK;
-
- while (!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
- {
- }
-
- if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
- {
- errorstate = SD_CMD_RSP_TIMEOUT;
-
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
-
- return errorstate;
- }
-
- /* Clear all the static flags */
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
-
- return errorstate;
-}
-
-/**
- * @brief Checks for error conditions for R2 (CID or CSD) response.
- * @param hsd: SD handle
- * @retval SD Card error state
- */
-static HAL_SD_ErrorTypedef SD_CmdResp2Error(SD_HandleTypeDef *hsd)
-{
- HAL_SD_ErrorTypedef errorstate = SD_OK;
-
- while (!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
- {
- }
-
- if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
- {
- errorstate = SD_CMD_RSP_TIMEOUT;
-
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
-
- return errorstate;
- }
- else if (__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL))
- {
- errorstate = SD_CMD_CRC_FAIL;
-
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL);
-
- return errorstate;
- }
- else
- {
- /* No error flag set */
- }
-
- /* Clear all the static flags */
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
-
- return errorstate;
-}
-
-/**
- * @brief Checks for error conditions for R6 (RCA) response.
- * @param hsd: SD handle
- * @param SD_CMD: The sent command index
- * @param pRCA: Pointer to the variable that will contain the SD card relative
- * address RCA
- * @retval SD Card error state
- */
-static HAL_SD_ErrorTypedef SD_CmdResp6Error(SD_HandleTypeDef *hsd, uint8_t SD_CMD, uint16_t *pRCA)
-{
- HAL_SD_ErrorTypedef errorstate = SD_OK;
- uint32_t response_r1;
-
- while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
- {
- }
-
- if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
- {
- errorstate = SD_CMD_RSP_TIMEOUT;
-
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
-
- return errorstate;
- }
- else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL))
- {
- errorstate = SD_CMD_CRC_FAIL;
-
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL);
-
- return errorstate;
- }
- else
- {
- /* No error flag set */
- }
-
- /* Check response received is of desired command */
- if(SDIO_GetCommandResponse(hsd->Instance) != SD_CMD)
- {
- errorstate = SD_ILLEGAL_CMD;
-
- return errorstate;
- }
-
- /* Clear all the static flags */
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
-
- /* We have received response, retrieve it. */
- response_r1 = SDIO_GetResponse(SDIO_RESP1);
-
- if((response_r1 & (SD_R6_GENERAL_UNKNOWN_ERROR | SD_R6_ILLEGAL_CMD | SD_R6_COM_CRC_FAILED)) == SD_ALLZERO)
- {
- *pRCA = (uint16_t) (response_r1 >> 16);
-
- return errorstate;
- }
-
- if((response_r1 & SD_R6_GENERAL_UNKNOWN_ERROR) == SD_R6_GENERAL_UNKNOWN_ERROR)
- {
- return(SD_GENERAL_UNKNOWN_ERROR);
- }
-
- if((response_r1 & SD_R6_ILLEGAL_CMD) == SD_R6_ILLEGAL_CMD)
- {
- return(SD_ILLEGAL_CMD);
- }
-
- if((response_r1 & SD_R6_COM_CRC_FAILED) == SD_R6_COM_CRC_FAILED)
- {
- return(SD_COM_CRC_FAILED);
- }
-
- return errorstate;
-}
-
-/**
- * @brief Enables the SDIO wide bus mode.
- * @param hsd: SD handle
- * @retval SD Card error state
- */
-static HAL_SD_ErrorTypedef SD_WideBus_Enable(SD_HandleTypeDef *hsd)
-{
- SDIO_CmdInitTypeDef sdio_cmdinitstructure;
- HAL_SD_ErrorTypedef errorstate = SD_OK;
-
- uint32_t scr[2] = {0, 0};
-
- if((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
- {
- errorstate = SD_LOCK_UNLOCK_FAILED;
-
- return errorstate;
- }
-
- /* Get SCR Register */
- errorstate = SD_FindSCR(hsd, scr);
-
- if(errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* If requested card supports wide bus operation */
- if((scr[1] & SD_WIDE_BUS_SUPPORT) != SD_ALLZERO)
- {
- /* Send CMD55 APP_CMD with argument as card's RCA.*/
- sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16);
- sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
- sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
- sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
- sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
-
- if(errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Send ACMD6 APP_CMD with argument as 2 for wide bus mode */
- sdio_cmdinitstructure.Argument = 2;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_SD_SET_BUSWIDTH;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_SD_SET_BUSWIDTH);
-
- if(errorstate != SD_OK)
- {
- return errorstate;
- }
-
- return errorstate;
- }
- else
- {
- errorstate = SD_REQUEST_NOT_APPLICABLE;
-
- return errorstate;
- }
-}
-
-/**
- * @brief Disables the SDIO wide bus mode.
- * @param hsd: SD handle
- * @retval SD Card error state
- */
-static HAL_SD_ErrorTypedef SD_WideBus_Disable(SD_HandleTypeDef *hsd)
-{
- SDIO_CmdInitTypeDef sdio_cmdinitstructure;
- HAL_SD_ErrorTypedef errorstate = SD_OK;
-
- uint32_t scr[2] = {0, 0};
-
- if((SDIO_GetResponse(SDIO_RESP1) & SD_CARD_LOCKED) == SD_CARD_LOCKED)
- {
- errorstate = SD_LOCK_UNLOCK_FAILED;
-
- return errorstate;
- }
-
- /* Get SCR Register */
- errorstate = SD_FindSCR(hsd, scr);
-
- if(errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* If requested card supports 1 bit mode operation */
- if((scr[1] & SD_SINGLE_BUS_SUPPORT) != SD_ALLZERO)
- {
- /* Send CMD55 APP_CMD with argument as card's RCA */
- sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16);
- sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
- sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
- sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
- sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
-
- if(errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Send ACMD6 APP_CMD with argument as 0 for single bus mode */
- sdio_cmdinitstructure.Argument = 0;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_SD_SET_BUSWIDTH;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_SD_SET_BUSWIDTH);
-
- if(errorstate != SD_OK)
- {
- return errorstate;
- }
-
- return errorstate;
- }
- else
- {
- errorstate = SD_REQUEST_NOT_APPLICABLE;
-
- return errorstate;
- }
-}
-
-
-/**
- * @brief Finds the SD card SCR register value.
- * @param hsd: SD handle
- * @param pSCR: pointer to the buffer that will contain the SCR value
- * @retval SD Card error state
- */
-static HAL_SD_ErrorTypedef SD_FindSCR(SD_HandleTypeDef *hsd, uint32_t *pSCR)
-{
- SDIO_CmdInitTypeDef sdio_cmdinitstructure;
- SDIO_DataInitTypeDef sdio_datainitstructure;
- HAL_SD_ErrorTypedef errorstate = SD_OK;
- uint32_t index = 0;
- uint32_t tempscr[2] = {0, 0};
-
- /* Set Block Size To 8 Bytes */
- /* Send CMD55 APP_CMD with argument as card's RCA */
- sdio_cmdinitstructure.Argument = (uint32_t)8;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_SET_BLOCKLEN;
- sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
- sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
- sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_SET_BLOCKLEN);
-
- if(errorstate != SD_OK)
- {
- return errorstate;
- }
-
- /* Send CMD55 APP_CMD with argument as card's RCA */
- sdio_cmdinitstructure.Argument = (uint32_t)((hsd->RCA) << 16);
- sdio_cmdinitstructure.CmdIndex = SD_CMD_APP_CMD;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_APP_CMD);
-
- if(errorstate != SD_OK)
- {
- return errorstate;
- }
- sdio_datainitstructure.DataTimeOut = SD_DATATIMEOUT;
- sdio_datainitstructure.DataLength = 8;
- sdio_datainitstructure.DataBlockSize = SDIO_DATABLOCK_SIZE_8B;
- sdio_datainitstructure.TransferDir = SDIO_TRANSFER_DIR_TO_SDIO;
- sdio_datainitstructure.TransferMode = SDIO_TRANSFER_MODE_BLOCK;
- sdio_datainitstructure.DPSM = SDIO_DPSM_ENABLE;
- SDIO_DataConfig(hsd->Instance, &sdio_datainitstructure);
-
- /* Send ACMD51 SD_APP_SEND_SCR with argument as 0 */
- sdio_cmdinitstructure.Argument = 0;
- sdio_cmdinitstructure.CmdIndex = SD_CMD_SD_APP_SEND_SCR;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- /* Check for error conditions */
- errorstate = SD_CmdResp1Error(hsd, SD_CMD_SD_APP_SEND_SCR);
-
- if(errorstate != SD_OK)
- {
- return errorstate;
- }
-#ifdef SDIO_STA_STBITERR
- while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND | SDIO_FLAG_STBITERR))
-#else /* SDIO_STA_STBITERR not defined */
- while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR | SDIO_FLAG_DCRCFAIL | SDIO_FLAG_DTIMEOUT | SDIO_FLAG_DBCKEND))
-#endif /* SDIO_STA_STBITERR */
- {
- if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXDAVL))
- {
- *(tempscr + index) = SDIO_ReadFIFO(hsd->Instance);
- index++;
- }
- }
-
- if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DTIMEOUT))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DTIMEOUT);
-
- errorstate = SD_DATA_TIMEOUT;
-
- return errorstate;
- }
- else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_DCRCFAIL))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_DCRCFAIL);
-
- errorstate = SD_DATA_CRC_FAIL;
-
- return errorstate;
- }
- else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_RXOVERR))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_RXOVERR);
-
- errorstate = SD_RX_OVERRUN;
-
- return errorstate;
- }
-#ifdef SDIO_STA_STBITERR
- else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_STBITERR))
- {
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_STBITERR);
-
- errorstate = SD_START_BIT_ERR;
-
- return errorstate;
- }
-#endif /* SDIO_STA_STBITERR */
- else
- {
- /* No error flag set */
- }
-
- /* Clear all the static flags */
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
-
- *(pSCR + 1) = ((tempscr[0] & SD_0TO7BITS) << 24) | ((tempscr[0] & SD_8TO15BITS) << 8) |\
- ((tempscr[0] & SD_16TO23BITS) >> 8) | ((tempscr[0] & SD_24TO31BITS) >> 24);
-
- *(pSCR) = ((tempscr[1] & SD_0TO7BITS) << 24) | ((tempscr[1] & SD_8TO15BITS) << 8) |\
- ((tempscr[1] & SD_16TO23BITS) >> 8) | ((tempscr[1] & SD_24TO31BITS) >> 24);
-
- return errorstate;
-}
-
-/**
- * @brief Checks if the SD card is in programming state.
- * @param hsd: SD handle
- * @param pStatus: pointer to the variable that will contain the SD card state
- * @retval SD Card error state
- */
-static HAL_SD_ErrorTypedef SD_IsCardProgramming(SD_HandleTypeDef *hsd, uint8_t *pStatus)
-{
- SDIO_CmdInitTypeDef sdio_cmdinitstructure;
- HAL_SD_ErrorTypedef errorstate = SD_OK;
- __IO uint32_t responseR1 = 0;
-
- sdio_cmdinitstructure.Argument = (uint32_t)(hsd->RCA << 16);
- sdio_cmdinitstructure.CmdIndex = SD_CMD_SEND_STATUS;
- sdio_cmdinitstructure.Response = SDIO_RESPONSE_SHORT;
- sdio_cmdinitstructure.WaitForInterrupt = SDIO_WAIT_NO;
- sdio_cmdinitstructure.CPSM = SDIO_CPSM_ENABLE;
- SDIO_SendCommand(hsd->Instance, &sdio_cmdinitstructure);
-
- while(!__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL | SDIO_FLAG_CMDREND | SDIO_FLAG_CTIMEOUT))
- {
- }
-
- if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CTIMEOUT))
- {
- errorstate = SD_CMD_RSP_TIMEOUT;
-
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CTIMEOUT);
-
- return errorstate;
- }
- else if(__HAL_SD_SDIO_GET_FLAG(hsd, SDIO_FLAG_CCRCFAIL))
- {
- errorstate = SD_CMD_CRC_FAIL;
-
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_FLAG_CCRCFAIL);
-
- return errorstate;
- }
- else
- {
- /* No error flag set */
- }
-
- /* Check response received is of desired command */
- if((uint32_t)SDIO_GetCommandResponse(hsd->Instance) != SD_CMD_SEND_STATUS)
- {
- errorstate = SD_ILLEGAL_CMD;
-
- return errorstate;
- }
-
- /* Clear all the static flags */
- __HAL_SD_SDIO_CLEAR_FLAG(hsd, SDIO_STATIC_FLAGS);
-
-
- /* We have received response, retrieve it for analysis */
- responseR1 = SDIO_GetResponse(SDIO_RESP1);
-
- /* Find out card status */
- *pStatus = (uint8_t)((responseR1 >> 9) & 0x0000000F);
-
- if((responseR1 & SD_OCR_ERRORBITS) == SD_ALLZERO)
- {
- return errorstate;
- }
-
- if((responseR1 & SD_OCR_ADDR_OUT_OF_RANGE) == SD_OCR_ADDR_OUT_OF_RANGE)
- {
- return(SD_ADDR_OUT_OF_RANGE);
- }
-
- if((responseR1 & SD_OCR_ADDR_MISALIGNED) == SD_OCR_ADDR_MISALIGNED)
- {
- return(SD_ADDR_MISALIGNED);
- }
-
- if((responseR1 & SD_OCR_BLOCK_LEN_ERR) == SD_OCR_BLOCK_LEN_ERR)
- {
- return(SD_BLOCK_LEN_ERR);
- }
-
- if((responseR1 & SD_OCR_ERASE_SEQ_ERR) == SD_OCR_ERASE_SEQ_ERR)
- {
- return(SD_ERASE_SEQ_ERR);
- }
-
- if((responseR1 & SD_OCR_BAD_ERASE_PARAM) == SD_OCR_BAD_ERASE_PARAM)
- {
- return(SD_BAD_ERASE_PARAM);
- }
-
- if((responseR1 & SD_OCR_WRITE_PROT_VIOLATION) == SD_OCR_WRITE_PROT_VIOLATION)
- {
- return(SD_WRITE_PROT_VIOLATION);
- }
-
- if((responseR1 & SD_OCR_LOCK_UNLOCK_FAILED) == SD_OCR_LOCK_UNLOCK_FAILED)
- {
- return(SD_LOCK_UNLOCK_FAILED);
- }
-
- if((responseR1 & SD_OCR_COM_CRC_FAILED) == SD_OCR_COM_CRC_FAILED)
- {
- return(SD_COM_CRC_FAILED);
- }
-
- if((responseR1 & SD_OCR_ILLEGAL_CMD) == SD_OCR_ILLEGAL_CMD)
- {
- return(SD_ILLEGAL_CMD);
- }
-
- if((responseR1 & SD_OCR_CARD_ECC_FAILED) == SD_OCR_CARD_ECC_FAILED)
- {
- return(SD_CARD_ECC_FAILED);
- }
-
- if((responseR1 & SD_OCR_CC_ERROR) == SD_OCR_CC_ERROR)
- {
- return(SD_CC_ERROR);
- }
-
- if((responseR1 & SD_OCR_GENERAL_UNKNOWN_ERROR) == SD_OCR_GENERAL_UNKNOWN_ERROR)
- {
- return(SD_GENERAL_UNKNOWN_ERROR);
- }
-
- if((responseR1 & SD_OCR_STREAM_READ_UNDERRUN) == SD_OCR_STREAM_READ_UNDERRUN)
- {
- return(SD_STREAM_READ_UNDERRUN);
- }
-
- if((responseR1 & SD_OCR_STREAM_WRITE_OVERRUN) == SD_OCR_STREAM_WRITE_OVERRUN)
- {
- return(SD_STREAM_WRITE_OVERRUN);
- }
-
- if((responseR1 & SD_OCR_CID_CSD_OVERWRITE) == SD_OCR_CID_CSD_OVERWRITE)
- {
- return(SD_CID_CSD_OVERWRITE);
- }
-
- if((responseR1 & SD_OCR_WP_ERASE_SKIP) == SD_OCR_WP_ERASE_SKIP)
- {
- return(SD_WP_ERASE_SKIP);
- }
-
- if((responseR1 & SD_OCR_CARD_ECC_DISABLED) == SD_OCR_CARD_ECC_DISABLED)
- {
- return(SD_CARD_ECC_DISABLED);
- }
-
- if((responseR1 & SD_OCR_ERASE_RESET) == SD_OCR_ERASE_RESET)
- {
- return(SD_ERASE_RESET);
- }
-
- if((responseR1 & SD_OCR_AKE_SEQ_ERROR) == SD_OCR_AKE_SEQ_ERROR)
- {
- return(SD_AKE_SEQ_ERROR);
- }
-
- return errorstate;
-}
-
-/**
- * @}
- */
-
-#endif /* HAL_SD_MODULE_ENABLED */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sdram.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sdram.c
deleted file mode 100644
index 375293e..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sdram.c
+++ /dev/null
@@ -1,842 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_sdram.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief SDRAM HAL module driver.
- * This file provides a generic firmware to drive SDRAM memories mounted
- * as external device.
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- This driver is a generic layered driver which contains a set of APIs used to
- control SDRAM memories. It uses the FMC layer functions to interface
- with SDRAM devices.
- The following sequence should be followed to configure the FMC to interface
- with SDRAM memories:
-
- (#) Declare a SDRAM_HandleTypeDef handle structure, for example:
- SDRAM_HandleTypeDef hdsram
-
- (++) Fill the SDRAM_HandleTypeDef handle "Init" field with the allowed
- values of the structure member.
-
- (++) Fill the SDRAM_HandleTypeDef handle "Instance" field with a predefined
- base register instance for NOR or SDRAM device
-
- (#) Declare a FMC_SDRAM_TimingTypeDef structure; for example:
- FMC_SDRAM_TimingTypeDef Timing;
- and fill its fields with the allowed values of the structure member.
-
- (#) Initialize the SDRAM Controller by calling the function HAL_SDRAM_Init(). This function
- performs the following sequence:
-
- (##) MSP hardware layer configuration using the function HAL_SDRAM_MspInit()
- (##) Control register configuration using the FMC SDRAM interface function
- FMC_SDRAM_Init()
- (##) Timing register configuration using the FMC SDRAM interface function
- FMC_SDRAM_Timing_Init()
- (##) Program the SDRAM external device by applying its initialization sequence
- according to the device plugged in your hardware. This step is mandatory
- for accessing the SDRAM device.
-
- (#) At this stage you can perform read/write accesses from/to the memory connected
- to the SDRAM Bank. You can perform either polling or DMA transfer using the
- following APIs:
- (++) HAL_SDRAM_Read()/HAL_SDRAM_Write() for polling read/write access
- (++) HAL_SDRAM_Read_DMA()/HAL_SDRAM_Write_DMA() for DMA read/write transfer
-
- (#) You can also control the SDRAM device by calling the control APIs HAL_SDRAM_WriteOperation_Enable()/
- HAL_SDRAM_WriteOperation_Disable() to respectively enable/disable the SDRAM write operation or
- the function HAL_SDRAM_SendCommand() to send a specified command to the SDRAM
- device. The command to be sent must be configured with the FMC_SDRAM_CommandTypeDef
- structure.
-
- (#) You can continuously monitor the SDRAM device HAL state by calling the function
- HAL_SDRAM_GetState()
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup SDRAM SDRAM
- * @brief SDRAM driver modules
- * @{
- */
-#ifdef HAL_SDRAM_MODULE_ENABLED
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup SDRAM_Exported_Functions SDRAM Exported Functions
- * @{
- */
-
-/** @defgroup SDRAM_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
- @verbatim
- ==============================================================================
- ##### SDRAM Initialization and de_initialization functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to initialize/de-initialize
- the SDRAM memory
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Performs the SDRAM device initialization sequence.
- * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
- * the configuration information for SDRAM module.
- * @param Timing: Pointer to SDRAM control timing structure
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing)
-{
- /* Check the SDRAM handle parameter */
- if(hsdram == NULL)
- {
- return HAL_ERROR;
- }
-
- if(hsdram->State == HAL_SDRAM_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hsdram->Lock = HAL_UNLOCKED;
- /* Initialize the low level hardware (MSP) */
- HAL_SDRAM_MspInit(hsdram);
- }
-
- /* Initialize the SDRAM controller state */
- hsdram->State = HAL_SDRAM_STATE_BUSY;
-
- /* Initialize SDRAM control Interface */
- FMC_SDRAM_Init(hsdram->Instance, &(hsdram->Init));
-
- /* Initialize SDRAM timing Interface */
- FMC_SDRAM_Timing_Init(hsdram->Instance, Timing, hsdram->Init.SDBank);
-
- /* Update the SDRAM controller state */
- hsdram->State = HAL_SDRAM_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Perform the SDRAM device initialization sequence.
- * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
- * the configuration information for SDRAM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram)
-{
- /* Initialize the low level hardware (MSP) */
- HAL_SDRAM_MspDeInit(hsdram);
-
- /* Configure the SDRAM registers with their reset values */
- FMC_SDRAM_DeInit(hsdram->Instance, hsdram->Init.SDBank);
-
- /* Reset the SDRAM controller state */
- hsdram->State = HAL_SDRAM_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hsdram);
-
- return HAL_OK;
-}
-
-/**
- * @brief SDRAM MSP Init.
- * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
- * the configuration information for SDRAM module.
- * @retval None
- */
-__weak void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_SDRAM_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief SDRAM MSP DeInit.
- * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
- * the configuration information for SDRAM module.
- * @retval None
- */
-__weak void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_SDRAM_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @brief This function handles SDRAM refresh error interrupt request.
- * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
- * the configuration information for SDRAM module.
- * @retval HAL status
-*/
-void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram)
-{
- /* Check SDRAM interrupt Rising edge flag */
- if(__FMC_SDRAM_GET_FLAG(hsdram->Instance, FMC_SDRAM_FLAG_REFRESH_IT))
- {
- /* SDRAM refresh error interrupt callback */
- HAL_SDRAM_RefreshErrorCallback(hsdram);
-
- /* Clear SDRAM refresh error interrupt pending bit */
- __FMC_SDRAM_CLEAR_FLAG(hsdram->Instance, FMC_SDRAM_FLAG_REFRESH_ERROR);
- }
-}
-
-/**
- * @brief SDRAM Refresh error callback.
- * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
- * the configuration information for SDRAM module.
- * @retval None
- */
-__weak void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_SDRAM_RefreshErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief DMA transfer complete callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-__weak void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_SDRAM_DMA_XferCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief DMA transfer complete error callback.
- * @param hdma: DMA handle
- * @retval None
- */
-__weak void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_SDRAM_DMA_XferErrorCallback could be implemented in the user file
- */
-}
-/**
- * @}
- */
-
-/** @defgroup SDRAM_Exported_Functions_Group2 Input and Output functions
- * @brief Input Output and memory control functions
- *
- @verbatim
- ==============================================================================
- ##### SDRAM Input and Output functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to use and control the SDRAM memory
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Reads 8-bit data buffer from the SDRAM memory.
- * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
- * the configuration information for SDRAM module.
- * @param pAddress: Pointer to read start address
- * @param pDstBuffer: Pointer to destination buffer
- * @param BufferSize: Size of the buffer to read from memory
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize)
-{
- __IO uint8_t *pSdramAddress = (uint8_t *)pAddress;
-
- /* Process Locked */
- __HAL_LOCK(hsdram);
-
- /* Check the SDRAM controller state */
- if(hsdram->State == HAL_SDRAM_STATE_BUSY)
- {
- return HAL_BUSY;
- }
- else if(hsdram->State == HAL_SDRAM_STATE_PRECHARGED)
- {
- return HAL_ERROR;
- }
-
- /* Read data from source */
- for(; BufferSize != 0; BufferSize--)
- {
- *pDstBuffer = *(__IO uint8_t *)pSdramAddress;
- pDstBuffer++;
- pSdramAddress++;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsdram);
-
- return HAL_OK;
-}
-
-/**
- * @brief Writes 8-bit data buffer to SDRAM memory.
- * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
- * the configuration information for SDRAM module.
- * @param pAddress: Pointer to write start address
- * @param pSrcBuffer: Pointer to source buffer to write
- * @param BufferSize: Size of the buffer to write to memory
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize)
-{
- __IO uint8_t *pSdramAddress = (uint8_t *)pAddress;
- uint32_t tmp = 0;
-
- /* Process Locked */
- __HAL_LOCK(hsdram);
-
- /* Check the SDRAM controller state */
- tmp = hsdram->State;
-
- if(tmp == HAL_SDRAM_STATE_BUSY)
- {
- return HAL_BUSY;
- }
- else if((tmp == HAL_SDRAM_STATE_PRECHARGED) || (tmp == HAL_SDRAM_STATE_WRITE_PROTECTED))
- {
- return HAL_ERROR;
- }
-
- /* Write data to memory */
- for(; BufferSize != 0; BufferSize--)
- {
- *(__IO uint8_t *)pSdramAddress = *pSrcBuffer;
- pSrcBuffer++;
- pSdramAddress++;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsdram);
-
- return HAL_OK;
-}
-
-/**
- * @brief Reads 16-bit data buffer from the SDRAM memory.
- * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
- * the configuration information for SDRAM module.
- * @param pAddress: Pointer to read start address
- * @param pDstBuffer: Pointer to destination buffer
- * @param BufferSize: Size of the buffer to read from memory
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize)
-{
- __IO uint16_t *pSdramAddress = (uint16_t *)pAddress;
-
- /* Process Locked */
- __HAL_LOCK(hsdram);
-
- /* Check the SDRAM controller state */
- if(hsdram->State == HAL_SDRAM_STATE_BUSY)
- {
- return HAL_BUSY;
- }
- else if(hsdram->State == HAL_SDRAM_STATE_PRECHARGED)
- {
- return HAL_ERROR;
- }
-
- /* Read data from source */
- for(; BufferSize != 0; BufferSize--)
- {
- *pDstBuffer = *(__IO uint16_t *)pSdramAddress;
- pDstBuffer++;
- pSdramAddress++;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsdram);
-
- return HAL_OK;
-}
-
-/**
- * @brief Writes 16-bit data buffer to SDRAM memory.
- * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
- * the configuration information for SDRAM module.
- * @param pAddress: Pointer to write start address
- * @param pSrcBuffer: Pointer to source buffer to write
- * @param BufferSize: Size of the buffer to write to memory
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize)
-{
- __IO uint16_t *pSdramAddress = (uint16_t *)pAddress;
- uint32_t tmp = 0;
-
- /* Process Locked */
- __HAL_LOCK(hsdram);
-
- /* Check the SDRAM controller state */
- tmp = hsdram->State;
-
- if(tmp == HAL_SDRAM_STATE_BUSY)
- {
- return HAL_BUSY;
- }
- else if((tmp == HAL_SDRAM_STATE_PRECHARGED) || (tmp == HAL_SDRAM_STATE_WRITE_PROTECTED))
- {
- return HAL_ERROR;
- }
-
- /* Write data to memory */
- for(; BufferSize != 0; BufferSize--)
- {
- *(__IO uint16_t *)pSdramAddress = *pSrcBuffer;
- pSrcBuffer++;
- pSdramAddress++;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsdram);
-
- return HAL_OK;
-}
-
-/**
- * @brief Reads 32-bit data buffer from the SDRAM memory.
- * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
- * the configuration information for SDRAM module.
- * @param pAddress: Pointer to read start address
- * @param pDstBuffer: Pointer to destination buffer
- * @param BufferSize: Size of the buffer to read from memory
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
-{
- __IO uint32_t *pSdramAddress = (uint32_t *)pAddress;
-
- /* Process Locked */
- __HAL_LOCK(hsdram);
-
- /* Check the SDRAM controller state */
- if(hsdram->State == HAL_SDRAM_STATE_BUSY)
- {
- return HAL_BUSY;
- }
- else if(hsdram->State == HAL_SDRAM_STATE_PRECHARGED)
- {
- return HAL_ERROR;
- }
-
- /* Read data from source */
- for(; BufferSize != 0; BufferSize--)
- {
- *pDstBuffer = *(__IO uint32_t *)pSdramAddress;
- pDstBuffer++;
- pSdramAddress++;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsdram);
-
- return HAL_OK;
-}
-
-/**
- * @brief Writes 32-bit data buffer to SDRAM memory.
- * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
- * the configuration information for SDRAM module.
- * @param pAddress: Pointer to write start address
- * @param pSrcBuffer: Pointer to source buffer to write
- * @param BufferSize: Size of the buffer to write to memory
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
-{
- __IO uint32_t *pSdramAddress = (uint32_t *)pAddress;
- uint32_t tmp = 0;
-
- /* Process Locked */
- __HAL_LOCK(hsdram);
-
- /* Check the SDRAM controller state */
- tmp = hsdram->State;
-
- if(tmp == HAL_SDRAM_STATE_BUSY)
- {
- return HAL_BUSY;
- }
- else if((tmp == HAL_SDRAM_STATE_PRECHARGED) || (tmp == HAL_SDRAM_STATE_WRITE_PROTECTED))
- {
- return HAL_ERROR;
- }
-
- /* Write data to memory */
- for(; BufferSize != 0; BufferSize--)
- {
- *(__IO uint32_t *)pSdramAddress = *pSrcBuffer;
- pSrcBuffer++;
- pSdramAddress++;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsdram);
-
- return HAL_OK;
-}
-
-/**
- * @brief Reads a Words data from the SDRAM memory using DMA transfer.
- * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
- * the configuration information for SDRAM module.
- * @param pAddress: Pointer to read start address
- * @param pDstBuffer: Pointer to destination buffer
- * @param BufferSize: Size of the buffer to read from memory
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
-{
- uint32_t tmp = 0;
-
- /* Process Locked */
- __HAL_LOCK(hsdram);
-
- /* Check the SDRAM controller state */
- tmp = hsdram->State;
-
- if(tmp == HAL_SDRAM_STATE_BUSY)
- {
- return HAL_BUSY;
- }
- else if(tmp == HAL_SDRAM_STATE_PRECHARGED)
- {
- return HAL_ERROR;
- }
-
- /* Configure DMA user callbacks */
- hsdram->hdma->XferCpltCallback = HAL_SDRAM_DMA_XferCpltCallback;
- hsdram->hdma->XferErrorCallback = HAL_SDRAM_DMA_XferErrorCallback;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(hsdram->hdma, (uint32_t)pAddress, (uint32_t)pDstBuffer, (uint32_t)BufferSize);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsdram);
-
- return HAL_OK;
-}
-
-/**
- * @brief Writes a Words data buffer to SDRAM memory using DMA transfer.
- * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
- * the configuration information for SDRAM module.
- * @param pAddress: Pointer to write start address
- * @param pSrcBuffer: Pointer to source buffer to write
- * @param BufferSize: Size of the buffer to write to memory
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
-{
- uint32_t tmp = 0;
-
- /* Process Locked */
- __HAL_LOCK(hsdram);
-
- /* Check the SDRAM controller state */
- tmp = hsdram->State;
-
- if(tmp == HAL_SDRAM_STATE_BUSY)
- {
- return HAL_BUSY;
- }
- else if((tmp == HAL_SDRAM_STATE_PRECHARGED) || (tmp == HAL_SDRAM_STATE_WRITE_PROTECTED))
- {
- return HAL_ERROR;
- }
-
- /* Configure DMA user callbacks */
- hsdram->hdma->XferCpltCallback = HAL_SDRAM_DMA_XferCpltCallback;
- hsdram->hdma->XferErrorCallback = HAL_SDRAM_DMA_XferErrorCallback;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(hsdram->hdma, (uint32_t)pSrcBuffer, (uint32_t)pAddress, (uint32_t)BufferSize);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsdram);
-
- return HAL_OK;
-}
-/**
- * @}
- */
-
-/** @defgroup SDRAM_Exported_Functions_Group3 Control functions
- * @brief management functions
- *
-@verbatim
- ==============================================================================
- ##### SDRAM Control functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to control dynamically
- the SDRAM interface.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Enables dynamically SDRAM write protection.
- * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
- * the configuration information for SDRAM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram)
-{
- /* Check the SDRAM controller state */
- if(hsdram->State == HAL_SDRAM_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Update the SDRAM state */
- hsdram->State = HAL_SDRAM_STATE_BUSY;
-
- /* Enable write protection */
- FMC_SDRAM_WriteProtection_Enable(hsdram->Instance, hsdram->Init.SDBank);
-
- /* Update the SDRAM state */
- hsdram->State = HAL_SDRAM_STATE_WRITE_PROTECTED;
-
- return HAL_OK;
-}
-
-/**
- * @brief Disables dynamically SDRAM write protection.
- * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
- * the configuration information for SDRAM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram)
-{
- /* Check the SDRAM controller state */
- if(hsdram->State == HAL_SDRAM_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Update the SDRAM state */
- hsdram->State = HAL_SDRAM_STATE_BUSY;
-
- /* Disable write protection */
- FMC_SDRAM_WriteProtection_Disable(hsdram->Instance, hsdram->Init.SDBank);
-
- /* Update the SDRAM state */
- hsdram->State = HAL_SDRAM_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Sends Command to the SDRAM bank.
- * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
- * the configuration information for SDRAM module.
- * @param Command: SDRAM command structure
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout)
-{
- /* Check the SDRAM controller state */
- if(hsdram->State == HAL_SDRAM_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Update the SDRAM state */
- hsdram->State = HAL_SDRAM_STATE_BUSY;
-
- /* Send SDRAM command */
- FMC_SDRAM_SendCommand(hsdram->Instance, Command, Timeout);
-
- /* Update the SDRAM controller state */
- if(Command->CommandMode == FMC_SDRAM_CMD_PALL)
- {
- hsdram->State = HAL_SDRAM_STATE_PRECHARGED;
- }
- else
- {
- hsdram->State = HAL_SDRAM_STATE_READY;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Programs the SDRAM Memory Refresh rate.
- * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
- * the configuration information for SDRAM module.
- * @param RefreshRate: The SDRAM refresh rate value
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate)
-{
- /* Check the SDRAM controller state */
- if(hsdram->State == HAL_SDRAM_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Update the SDRAM state */
- hsdram->State = HAL_SDRAM_STATE_BUSY;
-
- /* Program the refresh rate */
- FMC_SDRAM_ProgramRefreshRate(hsdram->Instance ,RefreshRate);
-
- /* Update the SDRAM state */
- hsdram->State = HAL_SDRAM_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Sets the Number of consecutive SDRAM Memory auto Refresh commands.
- * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
- * the configuration information for SDRAM module.
- * @param AutoRefreshNumber: The SDRAM auto Refresh number
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber)
-{
- /* Check the SDRAM controller state */
- if(hsdram->State == HAL_SDRAM_STATE_BUSY)
- {
- return HAL_BUSY;
- }
-
- /* Update the SDRAM state */
- hsdram->State = HAL_SDRAM_STATE_BUSY;
-
- /* Set the Auto-Refresh number */
- FMC_SDRAM_SetAutoRefreshNumber(hsdram->Instance ,AutoRefreshNumber);
-
- /* Update the SDRAM state */
- hsdram->State = HAL_SDRAM_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Returns the SDRAM memory current mode.
- * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
- * the configuration information for SDRAM module.
- * @retval The SDRAM memory mode.
- */
-uint32_t HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram)
-{
- /* Return the SDRAM memory current mode */
- return(FMC_SDRAM_GetModeStatus(hsdram->Instance, hsdram->Init.SDBank));
-}
-
-/**
- * @}
- */
-
-/** @defgroup SDRAM_Exported_Functions_Group4 State functions
- * @brief Peripheral State functions
- *
-@verbatim
- ==============================================================================
- ##### SDRAM State functions #####
- ==============================================================================
- [..]
- This subsection permits to get in run-time the status of the SDRAM controller
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Returns the SDRAM state.
- * @param hsdram: pointer to a SDRAM_HandleTypeDef structure that contains
- * the configuration information for SDRAM module.
- * @retval HAL state
- */
-HAL_SDRAM_StateTypeDef HAL_SDRAM_GetState(SDRAM_HandleTypeDef *hsdram)
-{
- return hsdram->State;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
-#endif /* HAL_SDRAM_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_smartcard.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_smartcard.c
deleted file mode 100644
index 094a060..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_smartcard.c
+++ /dev/null
@@ -1,1303 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_smartcard.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief SMARTCARD HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the SMARTCARD peripheral:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral State and Errors functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- The SMARTCARD HAL driver can be used as follows:
-
- (#) Declare a SMARTCARD_HandleTypeDef handle structure.
- (#) Initialize the SMARTCARD low level resources by implementing the HAL_SMARTCARD_MspInit() API:
- (##) Enable the USARTx interface clock.
- (##) SMARTCARD pins configuration:
- (+++) Enable the clock for the SMARTCARD GPIOs.
- (+++) Configure these SMARTCARD pins as alternate function pull-up.
- (##) NVIC configuration if you need to use interrupt process (HAL_SMARTCARD_Transmit_IT()
- and HAL_SMARTCARD_Receive_IT() APIs):
- (+++) Configure the USARTx interrupt priority.
- (+++) Enable the NVIC USART IRQ handle.
- (##) DMA Configuration if you need to use DMA process (HAL_SMARTCARD_Transmit_DMA()
- and HAL_SMARTCARD_Receive_DMA() APIs):
- (+++) Declare a DMA handle structure for the Tx/Rx stream.
- (+++) Enable the DMAx interface clock.
- (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
- (+++) Configure the DMA Tx/Rx Stream.
- (+++) Associate the initialized DMA handle to the SMARTCARD DMA Tx/Rx handle.
- (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx Stream.
-
- (#) Program the Baud Rate, Word Length , Stop Bit, Parity, Hardware
- flow control and Mode(Receiver/Transmitter) in the SMARTCARD Init structure.
-
- (#) Initialize the SMARTCARD registers by calling the HAL_SMARTCARD_Init() API:
- (++) These APIs configure also the low level Hardware GPIO, CLOCK, CORTEX...etc)
- by calling the customized HAL_SMARTCARD_MspInit() API.
- [..]
- (@) The specific SMARTCARD interrupts (Transmission complete interrupt,
- RXNE interrupt and Error Interrupts) will be managed using the macros
- __HAL_SMARTCARD_ENABLE_IT() and __HAL_SMARTCARD_DISABLE_IT() inside the transmit and receive process.
-
- [..]
- Three operation modes are available within this driver :
-
- *** Polling mode IO operation ***
- =================================
- [..]
- (+) Send an amount of data in blocking mode using HAL_SMARTCARD_Transmit()
- (+) Receive an amount of data in blocking mode using HAL_SMARTCARD_Receive()
-
- *** Interrupt mode IO operation ***
- ===================================
- [..]
- (+) Send an amount of data in non blocking mode using HAL_SMARTCARD_Transmit_IT()
- (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback
- (+) Receive an amount of data in non blocking mode using HAL_SMARTCARD_Receive_IT()
- (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback
- (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback
-
- *** DMA mode IO operation ***
- ==============================
- [..]
- (+) Send an amount of data in non blocking mode (DMA) using HAL_SMARTCARD_Transmit_DMA()
- (+) At transmission end of transfer HAL_SMARTCARD_TxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_SMARTCARD_TxCpltCallback
- (+) Receive an amount of data in non blocking mode (DMA) using HAL_SMARTCARD_Receive_DMA()
- (+) At reception end of transfer HAL_SMARTCARD_RxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_SMARTCARD_RxCpltCallback
- (+) In case of transfer Error, HAL_SMARTCARD_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_SMARTCARD_ErrorCallback
-
- *** SMARTCARD HAL driver macros list ***
- =============================================
- [..]
- Below the list of most used macros in SMARTCARD HAL driver.
-
- (+) __HAL_SMARTCARD_ENABLE: Enable the SMARTCARD peripheral
- (+) __HAL_SMARTCARD_DISABLE: Disable the SMARTCARD peripheral
- (+) __HAL_SMARTCARD_GET_FLAG : Check whether the specified SMARTCARD flag is set or not
- (+) __HAL_SMARTCARD_CLEAR_FLAG : Clear the specified SMARTCARD pending flag
- (+) __HAL_SMARTCARD_ENABLE_IT: Enable the specified SMARTCARD interrupt
- (+) __HAL_SMARTCARD_DISABLE_IT: Disable the specified SMARTCARD interrupt
-
- [..]
- (@) You can refer to the SMARTCARD HAL driver header file for more useful macros
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup SMARTCARD SMARTCARD
- * @brief HAL USART SMARTCARD module driver
- * @{
- */
-#ifdef HAL_SMARTCARD_MODULE_ENABLED
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @addtogroup SMARTCARD_Private_Constants
- * @{
- */
-#define SMARTCARD_TIMEOUT_VALUE 22000
-/**
- * @}
- */
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @addtogroup SMARTCARD_Private_Functions
- * @{
- */
-static void SMARTCARD_SetConfig (SMARTCARD_HandleTypeDef *hsc);
-static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc);
-static HAL_StatusTypeDef SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard);
-static HAL_StatusTypeDef SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc);
-static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma);
-static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
-static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma);
-static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsc, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
-/**
- * @}
- */
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup SMARTCARD_Exported_Functions SMARTCARD Exported Functions
- * @{
- */
-
-/** @defgroup SMARTCARD_Exported_Functions_Group1 SmartCard Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ==============================================================================
- ##### Initialization and Configuration functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to initialize the USART
- in Smartcard mode.
- [..]
- The Smartcard interface is designed to support asynchronous protocol Smartcards as
- defined in the ISO 7816-3 standard.
- [..]
- The USART can provide a clock to the smartcard through the SCLK output.
- In smartcard mode, SCLK is not associated to the communication but is simply derived
- from the internal peripheral input clock through a 5-bit prescaler.
- [..]
- (+) For the Smartcard mode only these parameters can be configured:
- (++) Baud Rate
- (++) Word Length => Should be 9 bits (8 bits + parity)
- (++) Stop Bit
- (++) Parity: => Should be enabled
- +-------------------------------------------------------------+
- | M bit | PCE bit | SMARTCARD frame |
- |---------------------|---------------------------------------|
- | 1 | 1 | | SB | 8 bit data | PB | STB | |
- +-------------------------------------------------------------+
- (++) USART polarity
- (++) USART phase
- (++) USART LastBit
- (++) Receiver/transmitter modes
- (++) Prescaler
- (++) GuardTime
- (++) NACKState: The Smartcard NACK state
-
- (+) Recommended SmartCard interface configuration to get the Answer to Reset from the Card:
- (++) Word Length = 9 Bits
- (++) 1.5 Stop Bit
- (++) Even parity
- (++) BaudRate = 12096 baud
- (++) Tx and Rx enabled
- [..]
- Please refer to the ISO 7816-3 specification for more details.
-
- -@- It is also possible to choose 0.5 stop bit for receiving but it is recommended
- to use 1.5 stop bits for both transmitting and receiving to avoid switching
- between the two configurations.
- [..]
- The HAL_SMARTCARD_Init() function follows the USART SmartCard configuration
- procedure (details for the procedure are available in reference manual (RM0329)).
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the SmartCard mode according to the specified
- * parameters in the SMARTCARD_InitTypeDef and create the associated handle .
- * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for SMARTCARD module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc)
-{
- /* Check the SMARTCARD handle allocation */
- if(hsc == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_SMARTCARD_INSTANCE(hsc->Instance));
- assert_param(IS_SMARTCARD_NACK_STATE(hsc->Init.NACKState));
-
- if(hsc->State == HAL_SMARTCARD_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hsc->Lock = HAL_UNLOCKED;
- /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
- HAL_SMARTCARD_MspInit(hsc);
- }
-
- hsc->State = HAL_SMARTCARD_STATE_BUSY;
-
- /* Set the Prescaler */
- MODIFY_REG(hsc->Instance->GTPR, USART_GTPR_PSC, hsc->Init.Prescaler);
-
- /* Set the Guard Time */
- MODIFY_REG(hsc->Instance->GTPR, USART_GTPR_GT, ((hsc->Init.GuardTime)<<8));
-
- /* Set the Smartcard Communication parameters */
- SMARTCARD_SetConfig(hsc);
-
- /* In SmartCard mode, the following bits must be kept cleared:
- - LINEN bit in the USART_CR2 register
- - HDSEL and IREN bits in the USART_CR3 register.*/
- hsc->Instance->CR2 &= ~USART_CR2_LINEN;
- hsc->Instance->CR3 &= ~(USART_CR3_IREN | USART_CR3_HDSEL);
-
- /* Enable the SMARTCARD Parity Error Interrupt */
- __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_PE);
-
- /* Enable the SMARTCARD Framing Error Interrupt */
- __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_ERR);
-
- /* Enable the Peripheral */
- __HAL_SMARTCARD_ENABLE(hsc);
-
- /* Configure the Smartcard NACK state */
- MODIFY_REG(hsc->Instance->CR3, USART_CR3_NACK, hsc->Init.NACKState);
-
- /* Enable the SC mode by setting the SCEN bit in the CR3 register */
- hsc->Instance->CR3 |= (USART_CR3_SCEN);
-
- /* Initialize the SMARTCARD state*/
- hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
- hsc->State= HAL_SMARTCARD_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the USART SmartCard peripheral
- * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for SMARTCARD module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc)
-{
- /* Check the SMARTCARD handle allocation */
- if(hsc == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_SMARTCARD_INSTANCE(hsc->Instance));
-
- hsc->State = HAL_SMARTCARD_STATE_BUSY;
-
- /* Disable the Peripheral */
- __HAL_SMARTCARD_DISABLE(hsc);
-
- /* DeInit the low level hardware */
- HAL_SMARTCARD_MspDeInit(hsc);
-
- hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
- hsc->State = HAL_SMARTCARD_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hsc);
-
- return HAL_OK;
-}
-
-/**
- * @brief SMARTCARD MSP Init
- * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for SMARTCARD module.
- * @retval None
- */
- __weak void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SMARTCARD_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief SMARTCARD MSP DeInit
- * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for SMARTCARD module.
- * @retval None
- */
- __weak void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SMARTCARD_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_Exported_Functions_Group2 IO operation functions
- * @brief SMARTCARD Transmit and Receive functions
- *
-@verbatim
- ===============================================================================
- ##### IO operation functions #####
- ===============================================================================
- This subsection provides a set of functions allowing to manage the SMARTCARD data transfers.
- [..]
- Smartcard is a single wire half duplex communication protocol.
- The Smartcard interface is designed to support asynchronous protocol Smartcards as
- defined in the ISO 7816-3 standard. The USART should be configured as:
- (+) 8 bits plus parity: where M=1 and PCE=1 in the USART_CR1 register
- (+) 1.5 stop bits when transmitting and receiving: where STOP=11 in the USART_CR2 register.
-
- (#) There are two modes of transfer:
- (++) Blocking mode: The communication is performed in polling mode.
- The HAL status of all data processing is returned by the same function
- after finishing transfer.
- (++) Non Blocking mode: The communication is performed using Interrupts
- or DMA, These APIs return the HAL status.
- The end of the data processing will be indicated through the
- dedicated SMARTCARD IRQ when using Interrupt mode or the DMA IRQ when
- using DMA mode.
- The HAL_SMARTCARD_TxCpltCallback(), HAL_SMARTCARD_RxCpltCallback() user callbacks
- will be executed respectively at the end of the Transmit or Receive process
- The HAL_SMARTCARD_ErrorCallback() user callback will be executed when a communication error is detected
-
- (#) Blocking mode APIs are :
- (++) HAL_SMARTCARD_Transmit()
- (++) HAL_SMARTCARD_Receive()
-
- (#) Non Blocking mode APIs with Interrupt are :
- (++) HAL_SMARTCARD_Transmit_IT()
- (++) HAL_SMARTCARD_Receive_IT()
- (++) HAL_SMARTCARD_IRQHandler()
-
- (#) Non Blocking mode functions with DMA are :
- (++) HAL_SMARTCARD_Transmit_DMA()
- (++) HAL_SMARTCARD_Receive_DMA()
-
- (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
- (++) HAL_SMARTCARD_TxCpltCallback()
- (++) HAL_SMARTCARD_RxCpltCallback()
- (++) HAL_SMARTCARD_ErrorCallback()
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Send an amount of data in blocking mode
- * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for SMARTCARD module.
- * @param pData: pointer to data buffer
- * @param Size: amount of data to be sent
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- uint16_t* tmp;
- uint32_t tmp1 = 0;
-
- tmp1 = hsc->State;
- if((tmp1 == HAL_SMARTCARD_STATE_READY) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_RX))
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hsc);
-
- hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
- /* Check if a non-blocking receive process is ongoing or not */
- if(hsc->State == HAL_SMARTCARD_STATE_BUSY_RX)
- {
- hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
- }
- else
- {
- hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
- }
-
- hsc->TxXferSize = Size;
- hsc->TxXferCount = Size;
- while(hsc->TxXferCount > 0)
- {
- hsc->TxXferCount--;
- if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- tmp = (uint16_t*) pData;
- hsc->Instance->DR = (*tmp & (uint16_t)0x01FF);
- pData +=1;
- }
-
- if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_TC, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Check if a non-blocking receive process is ongoing or not */
- if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX)
- {
- hsc->State = HAL_SMARTCARD_STATE_BUSY_RX;
- }
- else
- {
- hsc->State = HAL_SMARTCARD_STATE_READY;
- }
- /* Process Unlocked */
- __HAL_UNLOCK(hsc);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive an amount of data in blocking mode
- * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for SMARTCARD module.
- * @param pData: pointer to data buffer
- * @param Size: amount of data to be received
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- uint16_t* tmp;
- uint32_t tmp1 = 0;
-
- tmp1 = hsc->State;
- if((tmp1 == HAL_SMARTCARD_STATE_READY) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_TX))
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hsc);
-
- hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
-
- /* Check if a non-blocking transmit process is ongoing or not */
- if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX)
- {
- hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
- }
- else
- {
- hsc->State = HAL_SMARTCARD_STATE_BUSY_RX;
- }
-
- hsc->RxXferSize = Size;
- hsc->RxXferCount = Size;
-
- /* Check the remain data to be received */
- while(hsc->RxXferCount > 0)
- {
- hsc->RxXferCount--;
- if(SMARTCARD_WaitOnFlagUntilTimeout(hsc, SMARTCARD_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- tmp = (uint16_t*) pData;
- *tmp = (uint16_t)(hsc->Instance->DR & (uint16_t)0x00FF);
- pData +=1;
- }
-
- /* Check if a non-blocking transmit process is ongoing or not */
- if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX)
- {
- hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
- }
- else
- {
- hsc->State = HAL_SMARTCARD_STATE_READY;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsc);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Send an amount of data in non blocking mode
- * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for SMARTCARD module.
- * @param pData: pointer to data buffer
- * @param Size: amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
-{
- uint32_t tmp1 = 0;
-
- tmp1 = hsc->State;
- if((tmp1 == HAL_SMARTCARD_STATE_READY) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_RX))
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hsc);
-
- hsc->pTxBuffPtr = pData;
- hsc->TxXferSize = Size;
- hsc->TxXferCount = Size;
-
- hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
- /* Check if a non-blocking receive process is ongoing or not */
- if(hsc->State == HAL_SMARTCARD_STATE_BUSY_RX)
- {
- hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
- }
- else
- {
- hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsc);
-
- /* Enable the SMARTCARD Parity Error Interrupt */
- __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_PE);
-
- /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
- __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_ERR);
-
- /* Enable the SMARTCARD Transmit data register empty Interrupt */
- __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_TXE);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive an amount of data in non blocking mode
- * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for SMARTCARD module.
- * @param pData: pointer to data buffer
- * @param Size: amount of data to be received
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
-{
- uint32_t tmp1 = 0;
-
- tmp1 = hsc->State;
- if((tmp1 == HAL_SMARTCARD_STATE_READY) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_TX))
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hsc);
-
- hsc->pRxBuffPtr = pData;
- hsc->RxXferSize = Size;
- hsc->RxXferCount = Size;
-
- hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
- /* Check if a non-blocking transmit process is ongoing or not */
- if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX)
- {
- hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
- }
- else
- {
- hsc->State = HAL_SMARTCARD_STATE_BUSY_RX;
- }
- /* Process Unlocked */
- __HAL_UNLOCK(hsc);
-
- /* Enable the SMARTCARD Data Register not empty Interrupt */
- __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_RXNE);
-
- /* Enable the SMARTCARD Parity Error Interrupt */
- __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_PE);
-
- /* Enable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
- __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_ERR);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Send an amount of data in non blocking mode
- * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for SMARTCARD module.
- * @param pData: pointer to data buffer
- * @param Size: amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
-{
- uint32_t *tmp;
- uint32_t tmp1 = 0;
-
- tmp1 = hsc->State;
- if((tmp1 == HAL_SMARTCARD_STATE_READY) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_RX))
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hsc);
-
- hsc->pTxBuffPtr = pData;
- hsc->TxXferSize = Size;
- hsc->TxXferCount = Size;
-
- hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
- /* Check if a non-blocking receive process is ongoing or not */
- if(hsc->State == HAL_SMARTCARD_STATE_BUSY_RX)
- {
- hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
- }
- else
- {
- hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
- }
-
- /* Set the SMARTCARD DMA transfer complete callback */
- hsc->hdmatx->XferCpltCallback = SMARTCARD_DMATransmitCplt;
-
- /* Set the DMA error callback */
- hsc->hdmatx->XferErrorCallback = SMARTCARD_DMAError;
-
- /* Enable the SMARTCARD transmit DMA Stream */
- tmp = (uint32_t*)&pData;
- HAL_DMA_Start_IT(hsc->hdmatx, *(uint32_t*)tmp, (uint32_t)&hsc->Instance->DR, Size);
-
- /* Clear the TC flag in the SR register by writing 0 to it */
- __HAL_SMARTCARD_CLEAR_FLAG(hsc, SMARTCARD_FLAG_TC);
-
- /* Enable the DMA transfer for transmit request by setting the DMAT bit
- in the SMARTCARD CR3 register */
- hsc->Instance->CR3 |= USART_CR3_DMAT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsc);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive an amount of data in non blocking mode
- * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for SMARTCARD module.
- * @param pData: pointer to data buffer
- * @param Size: amount of data to be received
- * @note When the SMARTCARD parity is enabled (PCE = 1) the data received contain the parity bit.s
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size)
-{
- uint32_t *tmp;
- uint32_t tmp1 = 0;
-
- tmp1 = hsc->State;
- if((tmp1 == HAL_SMARTCARD_STATE_READY) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_TX))
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hsc);
-
- hsc->pRxBuffPtr = pData;
- hsc->RxXferSize = Size;
-
- hsc->ErrorCode = HAL_SMARTCARD_ERROR_NONE;
- /* Check if a non-blocking transmit process is ongoing or not */
- if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX)
- {
- hsc->State = HAL_SMARTCARD_STATE_BUSY_TX_RX;
- }
- else
- {
- hsc->State = HAL_SMARTCARD_STATE_BUSY_RX;
- }
-
- /* Set the SMARTCARD DMA transfer complete callback */
- hsc->hdmarx->XferCpltCallback = SMARTCARD_DMAReceiveCplt;
-
- /* Set the DMA error callback */
- hsc->hdmarx->XferErrorCallback = SMARTCARD_DMAError;
-
- /* Enable the DMA Stream */
- tmp = (uint32_t*)&pData;
- HAL_DMA_Start_IT(hsc->hdmarx, (uint32_t)&hsc->Instance->DR, *(uint32_t*)tmp, Size);
-
- /* Enable the DMA transfer for the receiver request by setting the DMAR bit
- in the SMARTCARD CR3 register */
- hsc->Instance->CR3 |= USART_CR3_DMAR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsc);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief This function handles SMARTCARD interrupt request.
- * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for SMARTCARD module.
- * @retval None
- */
-void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc)
-{
- uint32_t tmp1 = 0, tmp2 = 0;
-
- tmp1 = hsc->Instance->SR;
- tmp2 = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_PE);
-
- /* SMARTCARD parity error interrupt occurred --------------------------------*/
- if(((tmp1 & SMARTCARD_FLAG_PE) != RESET) && (tmp2 != RESET))
- {
- __HAL_SMARTCARD_CLEAR_PEFLAG(hsc);
- hsc->ErrorCode |= HAL_SMARTCARD_ERROR_PE;
- }
-
- tmp2 = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_ERR);
- /* SMARTCARD frame error interrupt occurred ---------------------------------*/
- if(((tmp1 & SMARTCARD_FLAG_FE) != RESET) && (tmp2 != RESET))
- {
- __HAL_SMARTCARD_CLEAR_FEFLAG(hsc);
- hsc->ErrorCode |= HAL_SMARTCARD_ERROR_FE;
- }
-
- tmp2 = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_ERR);
- /* SMARTCARD noise error interrupt occurred ---------------------------------*/
- if(((tmp1 & SMARTCARD_FLAG_NE) != RESET) && (tmp2 != RESET))
- {
- __HAL_SMARTCARD_CLEAR_NEFLAG(hsc);
- hsc->ErrorCode |= HAL_SMARTCARD_ERROR_NE;
- }
-
- tmp2 = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_ERR);
- /* SMARTCARD Over-Run interrupt occurred ------------------------------------*/
- if(((tmp1 & SMARTCARD_FLAG_ORE) != RESET) && (tmp2 != RESET))
- {
- __HAL_SMARTCARD_CLEAR_OREFLAG(hsc);
- hsc->ErrorCode |= HAL_SMARTCARD_ERROR_ORE;
- }
-
- tmp2 = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_RXNE);
- /* SMARTCARD in mode Receiver ----------------------------------------------*/
- if(((tmp1 & SMARTCARD_FLAG_RXNE) != RESET) && (tmp2 != RESET))
- {
- SMARTCARD_Receive_IT(hsc);
- }
-
- tmp2 = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_TXE);
- /* SMARTCARD in mode Transmitter -------------------------------------------*/
- if(((tmp1 & SMARTCARD_FLAG_TXE) != RESET) && (tmp2 != RESET))
- {
- SMARTCARD_Transmit_IT(hsc);
- }
-
- tmp2 = __HAL_SMARTCARD_GET_IT_SOURCE(hsc, SMARTCARD_IT_TC);
- /* SMARTCARD in mode Transmitter (transmission end) ------------------------*/
- if(((tmp1 & SMARTCARD_FLAG_TC) != RESET) && (tmp2 != RESET))
- {
- SMARTCARD_EndTransmit_IT(hsc);
- }
-
- /* Call the Error call Back in case of Errors */
- if(hsc->ErrorCode != HAL_SMARTCARD_ERROR_NONE)
- {
- /* Set the SMARTCARD state ready to be able to start again the process */
- hsc->State= HAL_SMARTCARD_STATE_READY;
- HAL_SMARTCARD_ErrorCallback(hsc);
- }
-}
-
-/**
- * @brief Tx Transfer completed callbacks
- * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for SMARTCARD module.
- * @retval None
- */
- __weak void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SMARTCARD_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Transfer completed callbacks
- * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for SMARTCARD module.
- * @retval None
- */
-__weak void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SMARTCARD_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief SMARTCARD error callbacks
- * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for SMARTCARD module.
- * @retval None
- */
- __weak void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SMARTCARD_ErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup SMARTCARD_Exported_Functions_Group3 Peripheral State and Errors functions
- * @brief SMARTCARD State and Errors functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral State and Errors functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to control the SmartCard.
- (+) HAL_SMARTCARD_GetState() API can be helpful to check in run-time the state of the SmartCard peripheral.
- (+) HAL_SMARTCARD_GetError() check in run-time errors that could be occurred during communication.
-@endverbatim
- * @{
- */
-
-/**
- * @brief return the SMARTCARD state
- * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for SMARTCARD module.
- * @retval HAL state
- */
-HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc)
-{
- return hsc->State;
-}
-
-/**
- * @brief Return the SMARTCARD error code
- * @param hsc : pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for the specified SMARTCARD.
- * @retval SMARTCARD Error Code
- */
-uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc)
-{
- return hsc->ErrorCode;
-}
-
-/**
- * @}
- */
-
-/**
- * @brief DMA SMARTCARD transmit process complete callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void SMARTCARD_DMATransmitCplt(DMA_HandleTypeDef *hdma)
-{
- SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- hsc->TxXferCount = 0;
-
- /* Disable the DMA transfer for transmit request by setting the DMAT bit
- in the USART CR3 register */
- hsc->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAT);
-
- /* Enable the SMARTCARD Transmit Complete Interrupt */
- __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_TC);
-}
-
-/**
- * @brief DMA SMARTCARD receive process complete callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void SMARTCARD_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
-{
- SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- hsc->RxXferCount = 0;
-
- /* Disable the DMA transfer for the receiver request by setting the DMAR bit
- in the USART CR3 register */
- hsc->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAR);
-
- /* Check if a non-blocking transmit process is ongoing or not */
- if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX)
- {
- hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
- }
- else
- {
- hsc->State = HAL_SMARTCARD_STATE_READY;
- }
-
- HAL_SMARTCARD_RxCpltCallback(hsc);
-}
-
-/**
- * @brief DMA SMARTCARD communication error callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void SMARTCARD_DMAError(DMA_HandleTypeDef *hdma)
-{
- SMARTCARD_HandleTypeDef* hsc = ( SMARTCARD_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- hsc->RxXferCount = 0;
- hsc->TxXferCount = 0;
- hsc->ErrorCode = HAL_SMARTCARD_ERROR_DMA;
- hsc->State= HAL_SMARTCARD_STATE_READY;
-
- HAL_SMARTCARD_ErrorCallback(hsc);
-}
-
-/**
- * @brief This function handles SMARTCARD Communication Timeout.
- * @param hsc: SMARTCARD handle
- * @param Flag: specifies the SMARTCARD flag to check.
- * @param Status: The new Flag status (SET or RESET).
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-static HAL_StatusTypeDef SMARTCARD_WaitOnFlagUntilTimeout(SMARTCARD_HandleTypeDef *hsc, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait until flag is set */
- if(Status == RESET)
- {
- while(__HAL_SMARTCARD_GET_FLAG(hsc, Flag) == RESET)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Disable TXE and RXNE interrupts for the interrupt process */
- __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_TXE);
- __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_RXNE);
-
- hsc->State= HAL_SMARTCARD_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsc);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- else
- {
- while(__HAL_SMARTCARD_GET_FLAG(hsc, Flag) != RESET)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Disable TXE and RXNE interrupts for the interrupt process */
- __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_TXE);
- __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_RXNE);
-
- hsc->State= HAL_SMARTCARD_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hsc);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief Send an amount of data in non blocking mode
- * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for SMARTCARD module.
- * @retval HAL status
- */
-static HAL_StatusTypeDef SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc)
-{
- uint16_t* tmp;
- uint32_t tmp1 = 0;
-
- tmp1 = hsc->State;
- if((tmp1 == HAL_SMARTCARD_STATE_BUSY_TX) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_TX_RX))
- {
- tmp = (uint16_t*) hsc->pTxBuffPtr;
- hsc->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF);
- hsc->pTxBuffPtr += 1;
-
- if(--hsc->TxXferCount == 0)
- {
- /* Disable the SMARTCARD Transmit data register empty Interrupt */
- __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_TXE);
-
- /* Enable the SMARTCARD Transmit Complete Interrupt */
- __HAL_SMARTCARD_ENABLE_IT(hsc, SMARTCARD_IT_TC);
- }
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Wraps up transmission in non blocking mode.
- * @param hsmartcard: pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for the specified SMARTCARD module.
- * @retval HAL status
- */
-static HAL_StatusTypeDef SMARTCARD_EndTransmit_IT(SMARTCARD_HandleTypeDef *hsmartcard)
-{
- /* Disable the SMARTCARD Transmit Complete Interrupt */
- __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_TC);
-
- /* Check if a receive process is ongoing or not */
- if(hsmartcard->State == HAL_SMARTCARD_STATE_BUSY_TX_RX)
- {
- hsmartcard->State = HAL_SMARTCARD_STATE_BUSY_RX;
- }
- else
- {
- /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
- __HAL_SMARTCARD_DISABLE_IT(hsmartcard, SMARTCARD_IT_ERR);
-
- hsmartcard->State = HAL_SMARTCARD_STATE_READY;
- }
-
- HAL_SMARTCARD_TxCpltCallback(hsmartcard);
-
- return HAL_OK;
-}
-
-/**
- * @brief Receive an amount of data in non blocking mode
- * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for SMARTCARD module.
- * @retval HAL status
- */
-static HAL_StatusTypeDef SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc)
-{
- uint16_t* tmp;
- uint32_t tmp1 = 0;
-
- tmp1 = hsc->State;
- if((tmp1 == HAL_SMARTCARD_STATE_BUSY_RX) || (tmp1 == HAL_SMARTCARD_STATE_BUSY_TX_RX))
- {
- tmp = (uint16_t*) hsc->pRxBuffPtr;
- *tmp = (uint16_t)(hsc->Instance->DR & (uint16_t)0x00FF);
- hsc->pRxBuffPtr += 1;
-
- if(--hsc->RxXferCount == 0)
- {
- __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_RXNE);
-
- /* Disable the SMARTCARD Parity Error Interrupt */
- __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_PE);
-
- /* Disable the SMARTCARD Error Interrupt: (Frame error, noise error, overrun error) */
- __HAL_SMARTCARD_DISABLE_IT(hsc, SMARTCARD_IT_ERR);
-
- /* Check if a non-blocking transmit process is ongoing or not */
- if(hsc->State == HAL_SMARTCARD_STATE_BUSY_TX_RX)
- {
- hsc->State = HAL_SMARTCARD_STATE_BUSY_TX;
- }
- else
- {
- hsc->State = HAL_SMARTCARD_STATE_READY;
- }
-
- HAL_SMARTCARD_RxCpltCallback(hsc);
-
- return HAL_OK;
- }
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Configure the SMARTCARD peripheral
- * @param hsc: pointer to a SMARTCARD_HandleTypeDef structure that contains
- * the configuration information for SMARTCARD module.
- * @retval None
- */
-static void SMARTCARD_SetConfig(SMARTCARD_HandleTypeDef *hsc)
-{
- uint32_t tmpreg = 0x00;
-
- /* Check the parameters */
- assert_param(IS_SMARTCARD_INSTANCE(hsc->Instance));
- assert_param(IS_SMARTCARD_POLARITY(hsc->Init.CLKPolarity));
- assert_param(IS_SMARTCARD_PHASE(hsc->Init.CLKPhase));
- assert_param(IS_SMARTCARD_LASTBIT(hsc->Init.CLKLastBit));
- assert_param(IS_SMARTCARD_BAUDRATE(hsc->Init.BaudRate));
- assert_param(IS_SMARTCARD_WORD_LENGTH(hsc->Init.WordLength));
- assert_param(IS_SMARTCARD_STOPBITS(hsc->Init.StopBits));
- assert_param(IS_SMARTCARD_PARITY(hsc->Init.Parity));
- assert_param(IS_SMARTCARD_MODE(hsc->Init.Mode));
- assert_param(IS_SMARTCARD_NACK_STATE(hsc->Init.NACKState));
-
- /* The LBCL, CPOL and CPHA bits have to be selected when both the transmitter and the
- receiver are disabled (TE=RE=0) to ensure that the clock pulses function correctly. */
- hsc->Instance->CR1 &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE));
-
- /*---------------------------- USART CR2 Configuration ---------------------*/
- tmpreg = hsc->Instance->CR2;
- /* Clear CLKEN, CPOL, CPHA and LBCL bits */
- tmpreg &= (uint32_t)~((uint32_t)(USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_CLKEN | USART_CR2_LBCL));
- /* Configure the SMARTCARD Clock, CPOL, CPHA and LastBit -----------------------*/
- /* Set CPOL bit according to hsc->Init.CLKPolarity value */
- /* Set CPHA bit according to hsc->Init.CLKPhase value */
- /* Set LBCL bit according to hsc->Init.CLKLastBit value */
- /* Set Stop Bits: Set STOP[13:12] bits according to hsc->Init.StopBits value */
- tmpreg |= (uint32_t)(USART_CR2_CLKEN | hsc->Init.CLKPolarity |
- hsc->Init.CLKPhase| hsc->Init.CLKLastBit | hsc->Init.StopBits);
- /* Write to USART CR2 */
- hsc->Instance->CR2 = (uint32_t)tmpreg;
-
- tmpreg = hsc->Instance->CR2;
-
- /* Clear STOP[13:12] bits */
- tmpreg &= (uint32_t)~((uint32_t)USART_CR2_STOP);
-
- /* Set Stop Bits: Set STOP[13:12] bits according to hsc->Init.StopBits value */
- tmpreg |= (uint32_t)(hsc->Init.StopBits);
-
- /* Write to USART CR2 */
- hsc->Instance->CR2 = (uint32_t)tmpreg;
-
- /*-------------------------- USART CR1 Configuration -----------------------*/
- tmpreg = hsc->Instance->CR1;
-
- /* Clear M, PCE, PS, TE and RE bits */
- tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \
- USART_CR1_RE));
-
- /* Configure the SMARTCARD Word Length, Parity and mode:
- Set the M bits according to hsc->Init.WordLength value
- Set PCE and PS bits according to hsc->Init.Parity value
- Set TE and RE bits according to hsc->Init.Mode value */
- tmpreg |= (uint32_t)hsc->Init.WordLength | hsc->Init.Parity | hsc->Init.Mode;
-
- /* Write to USART CR1 */
- hsc->Instance->CR1 = (uint32_t)tmpreg;
-
- /*-------------------------- USART CR3 Configuration -----------------------*/
- /* Clear CTSE and RTSE bits */
- hsc->Instance->CR3 &= (uint32_t)~((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE));
-
- /*-------------------------- USART BRR Configuration -----------------------*/
- if((hsc->Instance == USART1) || (hsc->Instance == USART6))
- {
- hsc->Instance->BRR = SMARTCARD_BRR(HAL_RCC_GetPCLK2Freq(), hsc->Init.BaudRate);
- }
- else
- {
- hsc->Instance->BRR = SMARTCARD_BRR(HAL_RCC_GetPCLK1Freq(), hsc->Init.BaudRate);
- }
-}
-
-/**
- * @}
- */
-
-#endif /* HAL_SMARTCARD_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spdifrx.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spdifrx.c
deleted file mode 100644
index acfda1e..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spdifrx.c
+++ /dev/null
@@ -1,1210 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_spdifrx.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief This file provides firmware functions to manage the following
- * functionalities of the SPDIFRX audio interface:
- * + Initialization and Configuration
- * + Data transfers functions
- * + DMA transfers management
- * + Interrupts and flags management
- @verbatim
- ===============================================================================
- ##### How to use this driver #####
- ===============================================================================
- [..]
- The SPDIFRX HAL driver can be used as follow:
-
- (#) Declare SPDIFRX_HandleTypeDef handle structure.
- (#) Initialize the SPDIFRX low level resources by implement the HAL_SPDIFRX_MspInit() API:
- (##) Enable the SPDIFRX interface clock.
- (##) SPDIFRX pins configuration:
- (+++) Enable the clock for the SPDIFRX GPIOs.
- (+++) Configure these SPDIFRX pins as alternate function pull-up.
- (##) NVIC configuration if you need to use interrupt process (HAL_SPDIFRX_ReceiveControlFlow_IT() and HAL_SPDIFRX_ReceiveDataFlow_IT() API's).
- (+++) Configure the SPDIFRX interrupt priority.
- (+++) Enable the NVIC SPDIFRX IRQ handle.
- (##) DMA Configuration if you need to use DMA process (HAL_SPDIFRX_ReceiveDataFlow_DMA() and HAL_SPDIFRX_ReceiveControlFlow_DMA() API's).
- (+++) Declare a DMA handle structure for the reception of the Data Flow channel.
- (+++) Declare a DMA handle structure for the reception of the Control Flow channel.
- (+++) Enable the DMAx interface clock.
- (+++) Configure the declared DMA handle structure CtrlRx/DataRx with the required parameters.
- (+++) Configure the DMA Channel.
- (+++) Associate the initialized DMA handle to the SPDIFRX DMA CtrlRx/DataRx handle.
- (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the
- DMA CtrlRx/DataRx channel.
-
- (#) Program the input selection, re-tries number, wait for activity, channel status selection, data format, stereo mode and masking of user bits
- using HAL_SPDIFRX_Init() function.
-
- -@- The specific SPDIFRX interrupts (RXNE/CSRNE and Error Interrupts) will be managed using the macros
- __SPDIFRX_ENABLE_IT() and __SPDIFRX_DISABLE_IT() inside the receive process.
- -@- Make sure that ck_spdif clock is configured.
-
- (#) Three operation modes are available within this driver :
-
- *** Polling mode for reception operation (for debug purpose) ***
- ================================================================
- [..]
- (+) Receive data flow in blocking mode using HAL_SPDIFRX_ReceiveDataFlow()
- (+) Receive control flow of data in blocking mode using HAL_SPDIFRX_ReceiveControlFlow()
-
- *** Interrupt mode for reception operation ***
- =========================================
- [..]
- (+) Receive an amount of data (Data Flow) in non blocking mode using HAL_SPDIFRX_ReceiveDataFlow_IT()
- (+) Receive an amount of data (Control Flow) in non blocking mode using HAL_SPDIFRX_ReceiveControlFlow_IT()
- (+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback
- (+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback
- (+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback
-
- *** DMA mode for reception operation ***
- ========================================
- [..]
- (+) Receive an amount of data (Data Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveDataFlow_DMA()
- (+) Receive an amount of data (Control Flow) in non blocking mode (DMA) using HAL_SPDIFRX_ReceiveControlFlow_DMA()
- (+) At reception end of half transfer HAL_SPDIFRX_RxHalfCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_SPDIFRX_RxHalfCpltCallback
- (+) At reception end of transfer HAL_SPDIFRX_RxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_SPDIFRX_RxCpltCallback
- (+) In case of transfer Error, HAL_SPDIFRX_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_SPDIFRX_ErrorCallback
- (+) Stop the DMA Transfer using HAL_SPDIFRX_DMAStop()
-
- *** SPDIFRX HAL driver macros list ***
- =============================================
- [..]
- Below the list of most used macros in USART HAL driver.
- (+) __HAL_SPDIFRX_IDLE: Disable the specified SPDIFRX peripheral (IDEL State)
- (+) __HAL_SPDIFRX_SYNC: Enable the synchronization state of the specified SPDIFRX peripheral (SYNC State)
- (+) __HAL_SPDIFRX_RCV: Enable the receive state of the specified SPDIFRX peripheral (RCV State)
- (+) __HAL_SPDIFRX_ENABLE_IT : Enable the specified SPDIFRX interrupts
- (+) __HAL_SPDIFRX_DISABLE_IT : Disable the specified SPDIFRX interrupts
- (+) __HAL_SPDIFRX_GET_FLAG: Check whether the specified SPDIFRX flag is set or not.
-
- [..]
- (@) You can refer to the SPDIFRX HAL driver header file for more useful macros
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-/** @defgroup SPDIFRX SPDIFRX
- * @brief SPDIFRX HAL module driver
- * @{
- */
-
-#ifdef HAL_SPDIFRX_MODULE_ENABLED
-
-#if defined(STM32F446xx)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-#define SPDIFRX_TIMEOUT_VALUE 0xFFFF
-
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @addtogroup SPDIFRX_Private_Functions
- * @{
- */
-static void SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma);
-static void SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
-static void SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma);
-static void SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma);
-static void SPDIFRX_DMAError(DMA_HandleTypeDef *hdma);
-static void SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif);
-static void SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif);
-static HAL_StatusTypeDef SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
-/**
- * @}
- */
-/* Exported functions ---------------------------------------------------------*/
-
-/** @defgroup SPDIFRX_Exported_Functions SPDIFRX Exported Functions
- * @{
- */
-
-/** @defgroup SPDIFRX_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
- @verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..] This subsection provides a set of functions allowing to initialize and
- de-initialize the SPDIFRX peripheral:
-
- (+) User must Implement HAL_SPDIFRX_MspInit() function in which he configures
- all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
-
- (+) Call the function HAL_SPDIFRX_Init() to configure the SPDIFRX peripheral with
- the selected configuration:
- (++) Input Selection (IN0, IN1,...)
- (++) Maximum allowed re-tries during synchronization phase
- (++) Wait for activity on SPDIF selected input
- (++) Channel status selection (from channel A or B)
- (++) Data format (LSB, MSB, ...)
- (++) Stereo mode
- (++) User bits masking (PT,C,U,V,...)
-
- (+) Call the function HAL_SPDIFRX_DeInit() to restore the default configuration
- of the selected SPDIFRXx peripheral.
- @endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the SPDIFRX according to the specified parameters
- * in the SPDIFRX_InitTypeDef and create the associated handle.
- * @param hspdif: SPDIFRX handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif)
-{
- uint32_t tmpreg = 0;
-
- /* Check the SPDIFRX handle allocation */
- if(hspdif == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the SPDIFRX parameters */
- assert_param(IS_STEREO_MODE(hspdif->Init.StereoMode));
- assert_param(IS_SPDIFRX_INPUT_SELECT(hspdif->Init.InputSelection));
- assert_param(IS_SPDIFRX_MAX_RETRIES(hspdif->Init.Retries));
- assert_param(IS_SPDIFRX_WAIT_FOR_ACTIVITY(hspdif->Init.WaitForActivity));
- assert_param(IS_SPDIFRX_CHANNEL(hspdif->Init.ChannelSelection));
- assert_param(IS_SPDIFRX_DATA_FORMAT(hspdif->Init.DataFormat));
- assert_param(IS_PREAMBLE_TYPE_MASK(hspdif->Init.PreambleTypeMask));
- assert_param(IS_CHANNEL_STATUS_MASK(hspdif->Init.ChannelStatusMask));
- assert_param(IS_VALIDITY_MASK(hspdif->Init.ValidityBitMask));
- assert_param(IS_PARITY_ERROR_MASK(hspdif->Init.ParityErrorMask));
-
- if(hspdif->State == HAL_SPDIFRX_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hspdif->Lock = HAL_UNLOCKED;
- /* Init the low level hardware : GPIO, CLOCK, CORTEX...etc */
- HAL_SPDIFRX_MspInit(hspdif);
- }
-
- /* SPDIFRX peripheral state is BUSY*/
- hspdif->State = HAL_SPDIFRX_STATE_BUSY;
-
- /* Disable SPDIFRX interface (IDLE State) */
- __HAL_SPDIFRX_IDLE(hspdif);
-
- /* Reset the old SPDIFRX CR configuration */
- tmpreg = hspdif->Instance->CR;
-
- tmpreg &= ~((uint16_t) SPDIFRX_CR_RXSTEO | SPDIFRX_CR_DRFMT | SPDIFRX_CR_PMSK |
- SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK |
- SPDIFRX_CR_CHSEL | SPDIFRX_CR_NBTR | SPDIFRX_CR_WFA |
- SPDIFRX_CR_INSEL);
-
- /* Sets the new configuration of the SPDIFRX peripheral */
- tmpreg |= ((uint16_t) hspdif->Init.StereoMode |
- hspdif->Init.InputSelection |
- hspdif->Init.Retries |
- hspdif->Init.WaitForActivity |
- hspdif->Init.ChannelSelection |
- hspdif->Init.DataFormat |
- hspdif->Init.PreambleTypeMask |
- hspdif->Init.ChannelStatusMask |
- hspdif->Init.ValidityBitMask |
- hspdif->Init.ParityErrorMask);
-
- hspdif->Instance->CR = tmpreg;
-
- hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
-
- /* SPDIFRX peripheral state is READY*/
- hspdif->State = HAL_SPDIFRX_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the SPDIFRX peripheral
- * @param hspdif: SPDIFRX handle
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPDIFRX_DeInit(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* Check the SPDIFRX handle allocation */
- if(hspdif == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_SPDIFRX_ALL_INSTANCE(hspdif->Instance));
-
- hspdif->State = HAL_SPDIFRX_STATE_BUSY;
-
- /* Disable SPDIFRX interface (IDLE state) */
- __HAL_SPDIFRX_IDLE(hspdif);
-
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
- HAL_SPDIFRX_MspDeInit(hspdif);
-
- hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
-
- /* SPDIFRX peripheral state is RESET*/
- hspdif->State = HAL_SPDIFRX_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hspdif);
-
- return HAL_OK;
-}
-
-/**
- * @brief SPDIFRX MSP Init
- * @param hspdif: SPDIFRX handle
- * @retval None
- */
-__weak void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPDIFRX_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief SPDIFRX MSP DeInit
- * @param hspdif: SPDIFRX handle
- * @retval None
- */
-__weak void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPDIFRX_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @brief Sets the SPDIFRX dtat format according to the specified parameters
- * in the SPDIFRX_InitTypeDef.
- * @param hspdif: SPDIFRX handle
- * @param sDataFormat: SPDIFRX data format
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef sDataFormat)
-{
- uint32_t tmpreg = 0;
-
- /* Check the SPDIFRX handle allocation */
- if(hspdif == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the SPDIFRX parameters */
- assert_param(IS_STEREO_MODE(sDataFormat.StereoMode));
- assert_param(IS_SPDIFRX_DATA_FORMAT(sDataFormat.DataFormat));
- assert_param(IS_PREAMBLE_TYPE_MASK(sDataFormat.PreambleTypeMask));
- assert_param(IS_CHANNEL_STATUS_MASK(sDataFormat.ChannelStatusMask));
- assert_param(IS_VALIDITY_MASK(sDataFormat.ValidityBitMask));
- assert_param(IS_PARITY_ERROR_MASK(sDataFormat.ParityErrorMask));
-
- /* Reset the old SPDIFRX CR configuration */
- tmpreg = hspdif->Instance->CR;
-
- if(((tmpreg & SPDIFRX_STATE_RCV) == SPDIFRX_STATE_RCV) &&
- (((tmpreg & SPDIFRX_CR_DRFMT) != sDataFormat.DataFormat) ||
- ((tmpreg & SPDIFRX_CR_RXSTEO) != sDataFormat.StereoMode)))
- {
- return HAL_ERROR;
- }
-
- tmpreg &= ~((uint16_t) SPDIFRX_CR_RXSTEO | SPDIFRX_CR_DRFMT | SPDIFRX_CR_PMSK |
- SPDIFRX_CR_VMSK | SPDIFRX_CR_CUMSK | SPDIFRX_CR_PTMSK);
-
- /* Sets the new configuration of the SPDIFRX peripheral */
- tmpreg |= ((uint16_t) sDataFormat.StereoMode |
- sDataFormat.DataFormat |
- sDataFormat.PreambleTypeMask |
- sDataFormat.ChannelStatusMask |
- sDataFormat.ValidityBitMask |
- sDataFormat.ParityErrorMask);
-
- hspdif->Instance->CR = tmpreg;
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup SPDIFRX_Exported_Functions_Group2 IO operation functions
- * @brief Data transfers functions
- *
-@verbatim
-===============================================================================
-##### IO operation functions #####
-===============================================================================
- [..]
- This subsection provides a set of functions allowing to manage the SPDIFRX data
- transfers.
-
- (#) There is two mode of transfer:
- (++) Blocking mode : The communication is performed in the polling mode.
- The status of all data processing is returned by the same function
- after finishing transfer.
- (++) No-Blocking mode : The communication is performed using Interrupts
- or DMA. These functions return the status of the transfer start-up.
- The end of the data processing will be indicated through the
- dedicated SPDIFRX IRQ when using Interrupt mode or the DMA IRQ when
- using DMA mode.
-
- (#) Blocking mode functions are :
- (++) HAL_SPDIFRX_ReceiveDataFlow()
- (++) HAL_SPDIFRX_ReceiveControlFlow()
- (+@) Do not use blocking mode to receive both control and data flow at the same time.
-
- (#) No-Blocking mode functions with Interrupt are :
- (++) HAL_SPDIFRX_ReceiveControlFlow_IT()
- (++) HAL_SPDIFRX_ReceiveDataFlow_IT()
-
- (#) No-Blocking mode functions with DMA are :
- (++) HAL_SPDIFRX_ReceiveControlFlow_DMA()
- (++) HAL_SPDIFRX_ReceiveDataFlow_DMA()
-
- (#) A set of Transfer Complete Callbacks are provided in No_Blocking mode:
- (++) HAL_SPDIFRX_RxCpltCallback()
- (++) HAL_SPDIFRX_ErrorCallback()
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Receives an amount of data (Data Flow) in blocking mode.
- * @param hspdif: pointer to SPDIFRX_HandleTypeDef structure that contains
- * the configuration information for SPDIFRX module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be received
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout)
-{
-
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(hspdif->State == HAL_SPDIFRX_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hspdif);
-
- hspdif->State = HAL_SPDIFRX_STATE_BUSY;
-
- /* Start synchronisation */
- __HAL_SPDIFRX_SYNC(hspdif);
-
- /* Wait until SYNCD flag is set */
- if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Start reception */
- __HAL_SPDIFRX_RCV(hspdif);
-
- /* Receive data flow */
- while(Size > 0)
- {
- /* Wait until RXNE flag is set */
- if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- (*pData++) = hspdif->Instance->DR;
- Size--;
- }
-
- /* SPDIFRX ready */
- hspdif->State = HAL_SPDIFRX_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receives an amount of data (Control Flow) in blocking mode.
- * @param hspdif: pointer to a SPDIFRX_HandleTypeDef structure that contains
- * the configuration information for SPDIFRX module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be received
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout)
-{
-
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if(hspdif->State == HAL_SPDIFRX_STATE_READY)
- {
- /* Process Locked */
- __HAL_LOCK(hspdif);
-
- hspdif->State = HAL_SPDIFRX_STATE_BUSY;
-
- /* Start synchronization */
- __HAL_SPDIFRX_SYNC(hspdif);
-
- /* Wait until SYNCD flag is set */
- if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Start reception */
- __HAL_SPDIFRX_RCV(hspdif);
-
- /* Receive control flow */
- while(Size > 0)
- {
- /* Wait until CSRNE flag is set */
- if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_CSRNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- (*pData++) = hspdif->Instance->CSR;
- Size--;
- }
-
- /* SPDIFRX ready */
- hspdif->State = HAL_SPDIFRX_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-/**
- * @brief Receive an amount of data (Data Flow) in non-blocking mode with Interrupt
- * @param hspdif: SPDIFRX handle
- * @param pData: a 32-bit pointer to the Receive data buffer.
- * @param Size: number of data sample to be received .
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
-{
- if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_CX))
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hspdif);
-
- hspdif->pRxBuffPtr = pData;
- hspdif->RxXferSize = Size;
- hspdif->RxXferCount = Size;
-
- hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
-
- /* Check if a receive process is ongoing or not */
- hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX;
-
-
- /* Enable the SPDIFRX PE Error Interrupt */
- __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
-
- /* Enable the SPDIFRX OVR Error Interrupt */
- __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- /* Enable the SPDIFRX RXNE interrupt */
- __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_RXNE);
-
- if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC || (SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00)
- {
- /* Start synchronization */
- __HAL_SPDIFRX_SYNC(hspdif);
-
- /* Wait until SYNCD flag is set */
- if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, SPDIFRX_TIMEOUT_VALUE) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Start reception */
- __HAL_SPDIFRX_RCV(hspdif);
- }
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive an amount of data (Control Flow) with Interrupt
- * @param hspdif: SPDIFRX handle
- * @param pData: a 32-bit pointer to the Receive data buffer.
- * @param Size: number of data sample (Control Flow) to be received :
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
-{
- if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_RX))
- {
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hspdif);
-
- hspdif->pCsBuffPtr = pData;
- hspdif->CsXferSize = Size;
- hspdif->CsXferCount = Size;
-
- hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
-
- /* Check if a receive process is ongoing or not */
- hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX;
-
-
- /* Enable the SPDIFRX PE Error Interrupt */
- __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
-
- /* Enable the SPDIFRX OVR Error Interrupt */
- __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- /* Enable the SPDIFRX CSRNE interrupt */
- __HAL_SPDIFRX_ENABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
-
- if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC || (SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00)
- {
- /* Start synchronization */
- __HAL_SPDIFRX_SYNC(hspdif);
-
- /* Wait until SYNCD flag is set */
- if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, SPDIFRX_TIMEOUT_VALUE) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Start reception */
- __HAL_SPDIFRX_RCV(hspdif);
- }
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive an amount of data (Data Flow) mode with DMA
- * @param hspdif: SPDIFRX handle
- * @param pData: a 32-bit pointer to the Receive data buffer.
- * @param Size: number of data sample to be received :
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
-{
-
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_CX))
- {
- hspdif->pRxBuffPtr = pData;
- hspdif->RxXferSize = Size;
- hspdif->RxXferCount = Size;
-
- /* Process Locked */
- __HAL_LOCK(hspdif);
-
- hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
- hspdif->State = HAL_SPDIFRX_STATE_BUSY_RX;
-
- /* Set the SPDIFRX Rx DMA Half transfer complete callback */
- hspdif->hdmaDrRx->XferHalfCpltCallback = SPDIFRX_DMARxHalfCplt;
-
- /* Set the SPDIFRX Rx DMA transfer complete callback */
- hspdif->hdmaDrRx->XferCpltCallback = SPDIFRX_DMARxCplt;
-
- /* Set the DMA error callback */
- hspdif->hdmaDrRx->XferErrorCallback = SPDIFRX_DMAError;
-
- /* Enable the DMA request */
- HAL_DMA_Start_IT(hspdif->hdmaDrRx, (uint32_t)&hspdif->Instance->DR, (uint32_t)hspdif->pRxBuffPtr, Size);
-
- /* Enable RXDMAEN bit in SPDIFRX CR register for data flow reception*/
- hspdif->Instance->CR |= SPDIFRX_CR_RXDMAEN;
-
- if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC || (SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00)
- {
- /* Start synchronization */
- __HAL_SPDIFRX_SYNC(hspdif);
-
- /* Wait until SYNCD flag is set */
- if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, SPDIFRX_TIMEOUT_VALUE) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Start reception */
- __HAL_SPDIFRX_RCV(hspdif);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive an amount of data (Control Flow) with DMA
- * @param hspdif: SPDIFRX handle
- * @param pData: a 32-bit pointer to the Receive data buffer.
- * @param Size: number of data (Control Flow) sample to be received :
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size)
-{
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- if((hspdif->State == HAL_SPDIFRX_STATE_READY) || (hspdif->State == HAL_SPDIFRX_STATE_BUSY_RX))
- {
- hspdif->pCsBuffPtr = pData;
- hspdif->CsXferSize = Size;
- hspdif->CsXferCount = Size;
-
- /* Process Locked */
- __HAL_LOCK(hspdif);
-
- hspdif->ErrorCode = HAL_SPDIFRX_ERROR_NONE;
- hspdif->State = HAL_SPDIFRX_STATE_BUSY_CX;
-
- /* Set the SPDIFRX Rx DMA Half transfer complete callback */
- hspdif->hdmaCsRx->XferHalfCpltCallback = SPDIFRX_DMACxHalfCplt;
-
- /* Set the SPDIFRX Rx DMA transfer complete callback */
- hspdif->hdmaCsRx->XferCpltCallback = SPDIFRX_DMACxCplt;
-
- /* Set the DMA error callback */
- hspdif->hdmaCsRx->XferErrorCallback = SPDIFRX_DMAError;
-
- /* Enable the DMA request */
- HAL_DMA_Start_IT(hspdif->hdmaCsRx, (uint32_t)&hspdif->Instance->CSR, (uint32_t)hspdif->pCsBuffPtr, Size);
-
- /* Enable CBDMAEN bit in SPDIFRX CR register for control flow reception*/
- hspdif->Instance->CR |= SPDIFRX_CR_CBDMAEN;
-
- if ((SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != SPDIFRX_STATE_SYNC || (SPDIFRX->CR & SPDIFRX_CR_SPDIFEN) != 0x00)
- {
- /* Start synchronization */
- __HAL_SPDIFRX_SYNC(hspdif);
-
- /* Wait until SYNCD flag is set */
- if(SPDIFRX_WaitOnFlagUntilTimeout(hspdif, SPDIFRX_FLAG_SYNCD, RESET, SPDIFRX_TIMEOUT_VALUE) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Start reception */
- __HAL_SPDIFRX_RCV(hspdif);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief stop the audio stream receive from the Media.
- * @param hspdif: SPDIFRX handle
- * @retval None
- */
-HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* Process Locked */
- __HAL_LOCK(hspdif);
-
- /* Disable the SPDIFRX DMA requests */
- hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN);
- hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN);
-
- /* Disable the SPDIFRX DMA channel */
- __HAL_DMA_DISABLE(hspdif->hdmaDrRx);
- __HAL_DMA_DISABLE(hspdif->hdmaCsRx);
-
- /* Disable SPDIFRX peripheral */
- __HAL_SPDIFRX_IDLE(hspdif);
-
- hspdif->State = HAL_SPDIFRX_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- return HAL_OK;
-}
-
-/**
- * @brief This function handles SPDIFRX interrupt request.
- * @param hspdif: SPDIFRX handle
- * @retval HAL status
- */
-void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* SPDIFRX in mode Data Flow Reception ------------------------------------------------*/
- if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_RXNE) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_RXNE) != RESET))
- {
- __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_RXNE);
- SPDIFRX_ReceiveDataFlow_IT(hspdif);
- }
-
- /* SPDIFRX in mode Control Flow Reception ------------------------------------------------*/
- if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_CSRNE) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_CSRNE) != RESET))
- {
- __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_IT_CSRNE);
- SPDIFRX_ReceiveControlFlow_IT(hspdif);
- }
-
- /* SPDIFRX Overrun error interrupt occurred ---------------------------------*/
- if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_OVR) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_OVRIE) != RESET))
- {
- __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_FLAG_OVR);
-
- /* Change the SPDIFRX error code */
- hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_OVR;
-
- /* the transfer is not stopped */
- HAL_SPDIFRX_ErrorCallback(hspdif);
- }
-
- /* SPDIFRX Parity error interrupt occurred ---------------------------------*/
- if((__HAL_SPDIFRX_GET_FLAG(hspdif, SPDIFRX_FLAG_PERR) != RESET) && (__HAL_SPDIFRX_GET_IT_SOURCE(hspdif, SPDIFRX_IT_PERRIE) != RESET))
- {
- __HAL_SPDIFRX_CLEAR_IT(hspdif, SPDIFRX_FLAG_PERR);
-
- /* Change the SPDIFRX error code */
- hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_PE;
-
- /* the transfer is not stopped */
- HAL_SPDIFRX_ErrorCallback(hspdif);
- }
-
-}
-
-/**
- * @brief Rx Transfer (Data flow) half completed callbacks
- * @param hspdif: SPDIFRX handle
- * @retval None
- */
-__weak void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Transfer (Data flow) completed callbacks
- * @param hspdif: SPDIFRX handle
- * @retval None
- */
-__weak void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx (Control flow) Transfer half completed callbacks
- * @param hspdif: SPDIFRX handle
- * @retval None
- */
-__weak void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Transfer (Control flow) completed callbacks
- * @param hspdif: SPDIFRX handle
- * @retval None
- */
-__weak void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPDIFRX_RxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief SPDIFRX error callbacks
- * @param hspdif: SPDIFRX handle
- * @retval None
- */
-__weak void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPDIFRX_ErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup SPDIFRX_Exported_Functions_Group3 Peripheral State and Errors functions
- * @brief Peripheral State functions
- *
-@verbatim
-===============================================================================
-##### Peripheral State and Errors functions #####
-===============================================================================
-[..]
-This subsection permit to get in run-time the status of the peripheral
-and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Return the SPDIFRX state
- * @param hspdif : SPDIFRX handle
- * @retval HAL state
- */
-HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef *hspdif)
-{
- return hspdif->State;
-}
-
-/**
- * @brief Return the SPDIFRX error code
- * @param hspdif : SPDIFRX handle
- * @retval SPDIFRX Error Code
- */
-uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef *hspdif)
-{
- return hspdif->ErrorCode;
-}
-
-/**
- * @}
- */
-
-/**
- * @brief DMA SPDIFRX receive process (Data flow) complete callback
- * @param hdma : DMA handle
- * @retval None
- */
-static void SPDIFRX_DMARxCplt(DMA_HandleTypeDef *hdma)
-{
- SPDIFRX_HandleTypeDef* hspdif = ( SPDIFRX_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- /* Disable Rx DMA Request */
- hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_RXDMAEN);
- hspdif->RxXferCount = 0;
-
- hspdif->State = HAL_SPDIFRX_STATE_READY;
- HAL_SPDIFRX_RxCpltCallback(hspdif);
-}
-
-/**
- * @brief DMA SPDIFRX receive process (Data flow) half complete callback
- * @param hdma : DMA handle
- * @retval None
- */
-static void SPDIFRX_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
-{
- SPDIFRX_HandleTypeDef* hspdif = (SPDIFRX_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- HAL_SPDIFRX_RxHalfCpltCallback(hspdif);
-}
-
-
-/**
- * @brief DMA SPDIFRX receive process (Control flow) complete callback
- * @param hdma : DMA handle
- * @retval None
- */
-static void SPDIFRX_DMACxCplt(DMA_HandleTypeDef *hdma)
-{
- SPDIFRX_HandleTypeDef* hspdif = ( SPDIFRX_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- /* Disable Cb DMA Request */
- hspdif->Instance->CR &= (uint16_t)(~SPDIFRX_CR_CBDMAEN);
- hspdif->CsXferCount = 0;
-
- hspdif->State = HAL_SPDIFRX_STATE_READY;
- HAL_SPDIFRX_CxCpltCallback(hspdif);
-}
-
-/**
- * @brief DMA SPDIFRX receive process (Control flow) half complete callback
- * @param hdma : DMA handle
- * @retval None
- */
-static void SPDIFRX_DMACxHalfCplt(DMA_HandleTypeDef *hdma)
-{
- SPDIFRX_HandleTypeDef* hspdif = (SPDIFRX_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- HAL_SPDIFRX_CxHalfCpltCallback(hspdif);
-}
-
-/**
- * @brief DMA SPDIFRX communication error callback
- * @param hdma : DMA handle
- * @retval None
- */
-static void SPDIFRX_DMAError(DMA_HandleTypeDef *hdma)
-{
- SPDIFRX_HandleTypeDef* hspdif = ( SPDIFRX_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- /* Disable Rx and Cb DMA Request */
- hspdif->Instance->CR &= (uint16_t)(~(SPDIFRX_CR_RXDMAEN | SPDIFRX_CR_CBDMAEN));
- hspdif->RxXferCount = 0;
-
- hspdif->State= HAL_SPDIFRX_STATE_READY;
-
- /* Set the error code and execute error callback*/
- hspdif->ErrorCode |= HAL_SPDIFRX_ERROR_DMA;
- HAL_SPDIFRX_ErrorCallback(hspdif);
-}
-
-
-/**
- * @brief Receive an amount of data (Data Flow) with Interrupt
- * @param hspdif: SPDIFRX handle
- * @retval None
- */
-static void SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* Receive data */
- (*hspdif->pRxBuffPtr++) = hspdif->Instance->DR;
- hspdif->RxXferCount--;
-
- if(hspdif->RxXferCount == 0)
- {
- /* Disable RXNE/PE and OVR interrupts */
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE | SPDIFRX_IT_PERRIE | SPDIFRX_IT_RXNE);
-
- hspdif->State = HAL_SPDIFRX_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- HAL_SPDIFRX_RxCpltCallback(hspdif);
- }
-}
-
-/**
- * @brief Receive an amount of data (Control Flow) with Interrupt
- * @param hspdif: SPDIFRX handle
- * @retval None
- */
-static void SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif)
-{
- /* Receive data */
- (*hspdif->pCsBuffPtr++) = hspdif->Instance->CSR;
- hspdif->CsXferCount--;
-
- if(hspdif->CsXferCount == 0)
- {
- /* Disable CSRNE interrupt */
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
-
- hspdif->State = HAL_SPDIFRX_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- HAL_SPDIFRX_CxCpltCallback(hspdif);
- }
-}
-
-/**
- * @brief This function handles SPDIFRX Communication Timeout.
- * @param hspdif: SPDIFRX handle
- * @param Flag: Flag checked
- * @param Status: Value of the flag expected
- * @param Timeout: Duration of the timeout
- * @retval HAL status
- */
-static HAL_StatusTypeDef SPDIFRX_WaitOnFlagUntilTimeout(SPDIFRX_HandleTypeDef *hspdif, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait until flag is set */
- if(Status == RESET)
- {
- while(__HAL_SPDIFRX_GET_FLAG(hspdif, Flag) == RESET)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
-
- hspdif->State= HAL_SPDIFRX_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- else
- {
- while(__HAL_SPDIFRX_GET_FLAG(hspdif, Flag) != RESET)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_RXNE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_CSRNE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_PERRIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_OVRIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SBLKIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_SYNCDIE);
- __HAL_SPDIFRX_DISABLE_IT(hspdif, SPDIFRX_IT_IFEIE);
-
- hspdif->State= HAL_SPDIFRX_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspdif);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- return HAL_OK;
-}
-
-/**
- * @}
- */
-#endif /* STM32F446xx */
-
-#endif /* HAL_SPDIFRX_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c
deleted file mode 100644
index 481a52f..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_spi.c
+++ /dev/null
@@ -1,2298 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_spi.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief SPI HAL module driver.
- *
- * This file provides firmware functions to manage the following
- * functionalities of the Serial Peripheral Interface (SPI) peripheral:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral Control functions
- * + Peripheral State functions
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- The SPI HAL driver can be used as follows:
-
- (#) Declare a SPI_HandleTypeDef handle structure, for example:
- SPI_HandleTypeDef hspi;
-
- (#)Initialize the SPI low level resources by implementing the HAL_SPI_MspInit ()API:
- (##) Enable the SPIx interface clock
- (##) SPI pins configuration
- (+++) Enable the clock for the SPI GPIOs
- (+++) Configure these SPI pins as alternate function push-pull
- (##) NVIC configuration if you need to use interrupt process
- (+++) Configure the SPIx interrupt priority
- (+++) Enable the NVIC SPI IRQ handle
- (##) DMA Configuration if you need to use DMA process
- (+++) Declare a DMA_HandleTypeDef handle structure for the transmit or receive stream
- (+++) Enable the DMAx interface clock using
- (+++) Configure the DMA handle parameters
- (+++) Configure the DMA Tx or Rx Stream
- (+++) Associate the initialized hdma_tx handle to the hspi DMA Tx or Rx handle
- (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx or Rx Stream
-
- (#) Program the Mode, Direction , Data size, Baudrate Prescaler, NSS
- management, Clock polarity and phase, FirstBit and CRC configuration in the hspi Init structure.
-
- (#) Initialize the SPI registers by calling the HAL_SPI_Init() API:
- (++) This API configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
- by calling the customized HAL_SPI_MspInit() API.
- [..]
- Circular mode restriction:
- (#) The DMA circular mode cannot be used when the SPI is configured in these modes:
- (##) Master 2Lines RxOnly
- (##) Master 1Line Rx
- (#) The CRC feature is not managed when the DMA circular mode is enabled
- (#) When the SPI DMA Pause/Stop features are used, we must use the following APIs
- the HAL_SPI_DMAPause()/ HAL_SPI_DMAStop() only under the SPI callbacks
-
-
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup SPI SPI
- * @brief SPI HAL module driver
- * @{
- */
-
-#ifdef HAL_SPI_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-#define SPI_TIMEOUT_VALUE 10
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @addtogroup SPI_Private_Functions
- * @{
- */
-static void SPI_TxCloseIRQHandler(SPI_HandleTypeDef *hspi);
-static void SPI_TxISR(SPI_HandleTypeDef *hspi);
-static void SPI_RxCloseIRQHandler(SPI_HandleTypeDef *hspi);
-static void SPI_2LinesRxISR(SPI_HandleTypeDef *hspi);
-static void SPI_RxISR(SPI_HandleTypeDef *hspi);
-static void SPI_DMAEndTransmitReceive(SPI_HandleTypeDef *hspi);
-static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma);
-static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
-static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma);
-static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma);
-static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma);
-static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma);
-static void SPI_DMAError(DMA_HandleTypeDef *hdma);
-static HAL_StatusTypeDef SPI_WaitOnFlagUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup SPI_Exported_Functions SPI Exported Functions
- * @{
- */
-
-/** @defgroup SPI_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization and de-initialization functions #####
- ===============================================================================
- [..] This subsection provides a set of functions allowing to initialize and
- de-initialize the SPIx peripheral:
-
- (+) User must implement HAL_SPI_MspInit() function in which he configures
- all related peripherals resources (CLOCK, GPIO, DMA, IT and NVIC ).
-
- (+) Call the function HAL_SPI_Init() to configure the selected device with
- the selected configuration:
- (++) Mode
- (++) Direction
- (++) Data Size
- (++) Clock Polarity and Phase
- (++) NSS Management
- (++) BaudRate Prescaler
- (++) FirstBit
- (++) TIMode
- (++) CRC Calculation
- (++) CRC Polynomial if CRC enabled
-
- (+) Call the function HAL_SPI_DeInit() to restore the default configuration
- of the selected SPIx peripheral.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the SPI according to the specified parameters
- * in the SPI_InitTypeDef and create the associated handle.
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi)
-{
- /* Check the SPI handle allocation */
- if(hspi == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_SPI_MODE(hspi->Init.Mode));
- assert_param(IS_SPI_DIRECTION_MODE(hspi->Init.Direction));
- assert_param(IS_SPI_DATASIZE(hspi->Init.DataSize));
- assert_param(IS_SPI_CPOL(hspi->Init.CLKPolarity));
- assert_param(IS_SPI_CPHA(hspi->Init.CLKPhase));
- assert_param(IS_SPI_NSS(hspi->Init.NSS));
- assert_param(IS_SPI_BAUDRATE_PRESCALER(hspi->Init.BaudRatePrescaler));
- assert_param(IS_SPI_FIRST_BIT(hspi->Init.FirstBit));
- assert_param(IS_SPI_TIMODE(hspi->Init.TIMode));
- assert_param(IS_SPI_CRC_CALCULATION(hspi->Init.CRCCalculation));
- assert_param(IS_SPI_CRC_POLYNOMIAL(hspi->Init.CRCPolynomial));
-
- if(hspi->State == HAL_SPI_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hspi->Lock = HAL_UNLOCKED;
- /* Init the low level hardware : GPIO, CLOCK, NVIC... */
- HAL_SPI_MspInit(hspi);
- }
-
- hspi->State = HAL_SPI_STATE_BUSY;
-
- /* Disable the selected SPI peripheral */
- __HAL_SPI_DISABLE(hspi);
-
- /*----------------------- SPIx CR1 & CR2 Configuration ---------------------*/
- /* Configure : SPI Mode, Communication Mode, Data size, Clock polarity and phase, NSS management,
- Communication speed, First bit and CRC calculation state */
- hspi->Instance->CR1 = (hspi->Init.Mode | hspi->Init.Direction | hspi->Init.DataSize |
- hspi->Init.CLKPolarity | hspi->Init.CLKPhase | (hspi->Init.NSS & SPI_CR1_SSM) |
- hspi->Init.BaudRatePrescaler | hspi->Init.FirstBit | hspi->Init.CRCCalculation);
-
- /* Configure : NSS management */
- hspi->Instance->CR2 = (((hspi->Init.NSS >> 16) & SPI_CR2_SSOE) | hspi->Init.TIMode);
-
- /*---------------------------- SPIx CRCPOLY Configuration ------------------*/
- /* Configure : CRC Polynomial */
- hspi->Instance->CRCPR = hspi->Init.CRCPolynomial;
-
- /* Activate the SPI mode (Make sure that I2SMOD bit in I2SCFGR register is reset) */
- hspi->Instance->I2SCFGR &= (uint32_t)(~SPI_I2SCFGR_I2SMOD);
-
- hspi->ErrorCode = HAL_SPI_ERROR_NONE;
- hspi->State = HAL_SPI_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the SPI peripheral
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPI_DeInit(SPI_HandleTypeDef *hspi)
-{
- /* Check the SPI handle allocation */
- if(hspi == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Disable the SPI Peripheral Clock */
- __HAL_SPI_DISABLE(hspi);
-
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC... */
- HAL_SPI_MspDeInit(hspi);
-
- hspi->ErrorCode = HAL_SPI_ERROR_NONE;
- hspi->State = HAL_SPI_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hspi);
-
- return HAL_OK;
-}
-
-/**
- * @brief SPI MSP Init
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @retval None
- */
- __weak void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi)
- {
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPI_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief SPI MSP DeInit
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @retval None
- */
- __weak void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPI_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup SPI_Exported_Functions_Group2 IO operation functions
- * @brief Data transfers functions
- *
-@verbatim
- ==============================================================================
- ##### IO operation functions #####
- ===============================================================================
- This subsection provides a set of functions allowing to manage the SPI
- data transfers.
-
- [..] The SPI supports master and slave mode :
-
- (#) There are two modes of transfer:
- (++) Blocking mode: The communication is performed in polling mode.
- The HAL status of all data processing is returned by the same function
- after finishing transfer.
- (++) No-Blocking mode: The communication is performed using Interrupts
- or DMA, These APIs return the HAL status.
- The end of the data processing will be indicated through the
- dedicated SPI IRQ when using Interrupt mode or the DMA IRQ when
- using DMA mode.
- The HAL_SPI_TxCpltCallback(), HAL_SPI_RxCpltCallback() and HAL_SPI_TxRxCpltCallback() user callbacks
- will be executed respectively at the end of the transmit or Receive process
- The HAL_SPI_ErrorCallback()user callback will be executed when a communication error is detected
-
- (#) APIs provided for these 2 transfer modes (Blocking mode or Non blocking mode using either Interrupt or DMA)
- exist for 1Line (simplex) and 2Lines (full duplex) modes.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Transmit an amount of data in blocking mode
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @param pData: pointer to data buffer
- * @param Size: amount of data to be sent
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
-
- if(hspi->State == HAL_SPI_STATE_READY)
- {
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
-
- /* Process Locked */
- __HAL_LOCK(hspi);
-
- /* Configure communication */
- hspi->State = HAL_SPI_STATE_BUSY_TX;
- hspi->ErrorCode = HAL_SPI_ERROR_NONE;
-
- hspi->pTxBuffPtr = pData;
- hspi->TxXferSize = Size;
- hspi->TxXferCount = Size;
-
- /*Init field not used in handle to zero */
- hspi->TxISR = 0;
- hspi->RxISR = 0;
- hspi->RxXferSize = 0;
- hspi->RxXferCount = 0;
-
- /* Reset CRC Calculation */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- SPI_RESET_CRC(hspi);
- }
-
- if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
- {
- /* Configure communication direction : 1Line */
- SPI_1LINE_TX(hspi);
- }
-
- /* Check if the SPI is already enabled */
- if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
- {
- /* Enable SPI peripheral */
- __HAL_SPI_ENABLE(hspi);
- }
-
- /* Transmit data in 8 Bit mode */
- if(hspi->Init.DataSize == SPI_DATASIZE_8BIT)
- {
- if((hspi->Init.Mode == SPI_MODE_SLAVE)|| (hspi->TxXferCount == 0x01))
- {
- hspi->Instance->DR = (*hspi->pTxBuffPtr++);
- hspi->TxXferCount--;
- }
- while(hspi->TxXferCount > 0)
- {
- /* Wait until TXE flag is set to send data */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- hspi->Instance->DR = (*hspi->pTxBuffPtr++);
- hspi->TxXferCount--;
- }
- /* Enable CRC Transmission */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
- }
- }
- /* Transmit data in 16 Bit mode */
- else
- {
- if((hspi->Init.Mode == SPI_MODE_SLAVE) || (hspi->TxXferCount == 0x01))
- {
- hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr);
- hspi->pTxBuffPtr+=2;
- hspi->TxXferCount--;
- }
- while(hspi->TxXferCount > 0)
- {
- /* Wait until TXE flag is set to send data */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr);
- hspi->pTxBuffPtr+=2;
- hspi->TxXferCount--;
- }
- /* Enable CRC Transmission */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
- }
- }
-
- /* Wait until TXE flag is set to send data */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
- return HAL_TIMEOUT;
- }
-
- /* Wait until Busy flag is reset before disabling SPI */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, Timeout) != HAL_OK)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
- return HAL_TIMEOUT;
- }
-
- /* Clear OVERRUN flag in 2 Lines communication mode because received is not read */
- if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
- {
- __HAL_SPI_CLEAR_OVRFLAG(hspi);
- }
-
- hspi->State = HAL_SPI_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspi);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive an amount of data in blocking mode
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @param pData: pointer to data buffer
- * @param Size: amount of data to be sent
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- __IO uint16_t tmpreg;
- uint32_t tmp = 0;
-
- if(hspi->State == HAL_SPI_STATE_READY)
- {
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hspi);
-
- /* Configure communication */
- hspi->State = HAL_SPI_STATE_BUSY_RX;
- hspi->ErrorCode = HAL_SPI_ERROR_NONE;
-
- hspi->pRxBuffPtr = pData;
- hspi->RxXferSize = Size;
- hspi->RxXferCount = Size;
-
- /*Init field not used in handle to zero */
- hspi->RxISR = 0;
- hspi->TxISR = 0;
- hspi->TxXferSize = 0;
- hspi->TxXferCount = 0;
-
- /* Configure communication direction : 1Line */
- if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
- {
- SPI_1LINE_RX(hspi);
- }
-
- /* Reset CRC Calculation */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- SPI_RESET_CRC(hspi);
- }
-
- if((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES))
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hspi);
-
- /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */
- return HAL_SPI_TransmitReceive(hspi, pData, pData, Size, Timeout);
- }
-
- /* Check if the SPI is already enabled */
- if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
- {
- /* Enable SPI peripheral */
- __HAL_SPI_ENABLE(hspi);
- }
-
- /* Receive data in 8 Bit mode */
- if(hspi->Init.DataSize == SPI_DATASIZE_8BIT)
- {
- while(hspi->RxXferCount > 1)
- {
- /* Wait until RXNE flag is set */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- (*hspi->pRxBuffPtr++) = hspi->Instance->DR;
- hspi->RxXferCount--;
- }
- /* Enable CRC Transmission */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
- }
- }
- /* Receive data in 16 Bit mode */
- else
- {
- while(hspi->RxXferCount > 1)
- {
- /* Wait until RXNE flag is set to read data */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
- hspi->pRxBuffPtr+=2;
- hspi->RxXferCount--;
- }
- /* Enable CRC Transmission */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
- }
- }
-
- /* Wait until RXNE flag is set */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Receive last data in 8 Bit mode */
- if(hspi->Init.DataSize == SPI_DATASIZE_8BIT)
- {
- (*hspi->pRxBuffPtr++) = hspi->Instance->DR;
- }
- /* Receive last data in 16 Bit mode */
- else
- {
- *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
- hspi->pRxBuffPtr+=2;
- }
- hspi->RxXferCount--;
-
- /* Wait until RXNE flag is set: CRC Received */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
- return HAL_TIMEOUT;
- }
-
- /* Read CRC to Flush RXNE flag */
- tmpreg = hspi->Instance->DR;
- UNUSED(tmpreg);
- }
-
- if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
- {
- /* Disable SPI peripheral */
- __HAL_SPI_DISABLE(hspi);
- }
-
- hspi->State = HAL_SPI_STATE_READY;
-
- tmp = __HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR);
- /* Check if CRC error occurred */
- if((hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) && (tmp != RESET))
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
-
- /* Reset CRC Calculation */
- SPI_RESET_CRC(hspi);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspi);
-
- return HAL_ERROR;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspi);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Transmit and Receive an amount of data in blocking mode
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @param pTxData: pointer to transmission data buffer
- * @param pRxData: pointer to reception data buffer to be
- * @param Size: amount of data to be sent
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
-{
- __IO uint16_t tmpreg;
- uint32_t tmpstate = 0, tmp = 0;
-
- tmpstate = hspi->State;
- if((tmpstate == HAL_SPI_STATE_READY) || (tmpstate == HAL_SPI_STATE_BUSY_RX))
- {
- if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
-
- /* Process Locked */
- __HAL_LOCK(hspi);
-
- /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
- if(hspi->State == HAL_SPI_STATE_READY)
- {
- hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
- }
-
- /* Configure communication */
- hspi->ErrorCode = HAL_SPI_ERROR_NONE;
-
- hspi->pRxBuffPtr = pRxData;
- hspi->RxXferSize = Size;
- hspi->RxXferCount = Size;
-
- hspi->pTxBuffPtr = pTxData;
- hspi->TxXferSize = Size;
- hspi->TxXferCount = Size;
-
- /*Init field not used in handle to zero */
- hspi->RxISR = 0;
- hspi->TxISR = 0;
-
- /* Reset CRC Calculation */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- SPI_RESET_CRC(hspi);
- }
-
- /* Check if the SPI is already enabled */
- if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
- {
- /* Enable SPI peripheral */
- __HAL_SPI_ENABLE(hspi);
- }
-
- /* Transmit and Receive data in 16 Bit mode */
- if(hspi->Init.DataSize == SPI_DATASIZE_16BIT)
- {
- if((hspi->Init.Mode == SPI_MODE_SLAVE) || ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->TxXferCount == 0x01)))
- {
- hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr);
- hspi->pTxBuffPtr+=2;
- hspi->TxXferCount--;
- }
- if(hspi->TxXferCount == 0)
- {
- /* Enable CRC Transmission */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
- }
-
- /* Wait until RXNE flag is set */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
- hspi->pRxBuffPtr+=2;
- hspi->RxXferCount--;
- }
- else
- {
- while(hspi->TxXferCount > 0)
- {
- /* Wait until TXE flag is set to send data */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr);
- hspi->pTxBuffPtr+=2;
- hspi->TxXferCount--;
-
- /* Enable CRC Transmission */
- if((hspi->TxXferCount == 0) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
- {
- hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
- }
-
- /* Wait until RXNE flag is set */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
- hspi->pRxBuffPtr+=2;
- hspi->RxXferCount--;
- }
- /* Receive the last byte */
- if(hspi->Init.Mode == SPI_MODE_SLAVE)
- {
- /* Wait until RXNE flag is set */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
- hspi->pRxBuffPtr+=2;
- hspi->RxXferCount--;
- }
- }
- }
- /* Transmit and Receive data in 8 Bit mode */
- else
- {
- if((hspi->Init.Mode == SPI_MODE_SLAVE) || ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->TxXferCount == 0x01)))
- {
- hspi->Instance->DR = (*hspi->pTxBuffPtr++);
- hspi->TxXferCount--;
- }
- if(hspi->TxXferCount == 0)
- {
- /* Enable CRC Transmission */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
- }
-
- /* Wait until RXNE flag is set */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- (*hspi->pRxBuffPtr) = hspi->Instance->DR;
- hspi->RxXferCount--;
- }
- else
- {
- while(hspi->TxXferCount > 0)
- {
- /* Wait until TXE flag is set to send data */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- hspi->Instance->DR = (*hspi->pTxBuffPtr++);
- hspi->TxXferCount--;
-
- /* Enable CRC Transmission */
- if((hspi->TxXferCount == 0) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
- {
- hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
- }
-
- /* Wait until RXNE flag is set */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- (*hspi->pRxBuffPtr++) = hspi->Instance->DR;
- hspi->RxXferCount--;
- }
- if(hspi->Init.Mode == SPI_MODE_SLAVE)
- {
- /* Wait until RXNE flag is set */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- (*hspi->pRxBuffPtr++) = hspi->Instance->DR;
- hspi->RxXferCount--;
- }
- }
- }
-
- /* Read CRC from DR to close CRC calculation process */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- /* Wait until RXNE flag is set */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
- return HAL_TIMEOUT;
- }
- /* Read CRC */
- tmpreg = hspi->Instance->DR;
- UNUSED(tmpreg);
- }
-
- /* Wait until Busy flag is reset before disabling SPI */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, Timeout) != HAL_OK)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
- return HAL_TIMEOUT;
- }
-
- hspi->State = HAL_SPI_STATE_READY;
-
- tmp = __HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR);
- /* Check if CRC error occurred */
- if((hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE) && (tmp != RESET))
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
-
- /* Reset CRC Calculation */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- SPI_RESET_CRC(hspi);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspi);
-
- return HAL_ERROR;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspi);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Transmit an amount of data in no-blocking mode with Interrupt
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @param pData: pointer to data buffer
- * @param Size: amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
-{
- if(hspi->State == HAL_SPI_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
-
- /* Process Locked */
- __HAL_LOCK(hspi);
-
- /* Configure communication */
- hspi->State = HAL_SPI_STATE_BUSY_TX;
- hspi->ErrorCode = HAL_SPI_ERROR_NONE;
-
- hspi->TxISR = &SPI_TxISR;
- hspi->pTxBuffPtr = pData;
- hspi->TxXferSize = Size;
- hspi->TxXferCount = Size;
-
- /*Init field not used in handle to zero */
- hspi->RxISR = 0;
- hspi->RxXferSize = 0;
- hspi->RxXferCount = 0;
-
- /* Configure communication direction : 1Line */
- if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
- {
- SPI_1LINE_TX(hspi);
- }
-
- /* Reset CRC Calculation */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- SPI_RESET_CRC(hspi);
- }
-
- if (hspi->Init.Direction == SPI_DIRECTION_2LINES)
- {
- __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE));
- }else
- {
- /* Enable TXE and ERR interrupt */
- __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_ERR));
- }
- /* Process Unlocked */
- __HAL_UNLOCK(hspi);
-
- /* Check if the SPI is already enabled */
- if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
- {
- /* Enable SPI peripheral */
- __HAL_SPI_ENABLE(hspi);
- }
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive an amount of data in no-blocking mode with Interrupt
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @param pData: pointer to data buffer
- * @param Size: amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
-{
- if(hspi->State == HAL_SPI_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hspi);
-
- /* Configure communication */
- hspi->State = HAL_SPI_STATE_BUSY_RX;
- hspi->ErrorCode = HAL_SPI_ERROR_NONE;
-
- hspi->RxISR = &SPI_RxISR;
- hspi->pRxBuffPtr = pData;
- hspi->RxXferSize = Size;
- hspi->RxXferCount = Size ;
-
- /*Init field not used in handle to zero */
- hspi->TxISR = 0;
- hspi->TxXferSize = 0;
- hspi->TxXferCount = 0;
-
- /* Configure communication direction : 1Line */
- if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
- {
- SPI_1LINE_RX(hspi);
- }
- else if((hspi->Init.Direction == SPI_DIRECTION_2LINES) && (hspi->Init.Mode == SPI_MODE_MASTER))
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hspi);
-
- /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */
- return HAL_SPI_TransmitReceive_IT(hspi, pData, pData, Size);
- }
-
- /* Reset CRC Calculation */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- SPI_RESET_CRC(hspi);
- }
-
- /* Enable TXE and ERR interrupt */
- __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_RXNE | SPI_IT_ERR));
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspi);
-
- /* Note : The SPI must be enabled after unlocking current process
- to avoid the risk of SPI interrupt handle execution before current
- process unlock */
-
- /* Check if the SPI is already enabled */
- if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
- {
- /* Enable SPI peripheral */
- __HAL_SPI_ENABLE(hspi);
- }
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Transmit and Receive an amount of data in no-blocking mode with Interrupt
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @param pTxData: pointer to transmission data buffer
- * @param pRxData: pointer to reception data buffer to be
- * @param Size: amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
-{
- uint32_t tmpstate = 0;
-
- tmpstate = hspi->State;
- if((tmpstate == HAL_SPI_STATE_READY) || \
- ((hspi->Init.Mode == SPI_MODE_MASTER) && (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmpstate == HAL_SPI_STATE_BUSY_RX)))
- {
- if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
-
- /* Process locked */
- __HAL_LOCK(hspi);
-
- /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
- if(hspi->State != HAL_SPI_STATE_BUSY_RX)
- {
- hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
- }
-
- /* Configure communication */
- hspi->ErrorCode = HAL_SPI_ERROR_NONE;
-
- hspi->TxISR = &SPI_TxISR;
- hspi->pTxBuffPtr = pTxData;
- hspi->TxXferSize = Size;
- hspi->TxXferCount = Size;
-
- hspi->RxISR = &SPI_2LinesRxISR;
- hspi->pRxBuffPtr = pRxData;
- hspi->RxXferSize = Size;
- hspi->RxXferCount = Size;
-
- /* Reset CRC Calculation */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- SPI_RESET_CRC(hspi);
- }
-
- /* Enable TXE, RXNE and ERR interrupt */
- __HAL_SPI_ENABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspi);
-
- /* Check if the SPI is already enabled */
- if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
- {
- /* Enable SPI peripheral */
- __HAL_SPI_ENABLE(hspi);
- }
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Transmit an amount of data in no-blocking mode with DMA
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @param pData: pointer to data buffer
- * @param Size: amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
-{
- if(hspi->State == HAL_SPI_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_SPI_DIRECTION_2LINES_OR_1LINE(hspi->Init.Direction));
-
- /* Process Locked */
- __HAL_LOCK(hspi);
-
- /* Configure communication */
- hspi->State = HAL_SPI_STATE_BUSY_TX;
- hspi->ErrorCode = HAL_SPI_ERROR_NONE;
-
- hspi->pTxBuffPtr = pData;
- hspi->TxXferSize = Size;
- hspi->TxXferCount = Size;
-
- /*Init field not used in handle to zero */
- hspi->TxISR = 0;
- hspi->RxISR = 0;
- hspi->RxXferSize = 0;
- hspi->RxXferCount = 0;
-
- /* Configure communication direction : 1Line */
- if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
- {
- SPI_1LINE_TX(hspi);
- }
-
- /* Reset CRC Calculation */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- SPI_RESET_CRC(hspi);
- }
-
- /* Set the SPI TxDMA Half transfer complete callback */
- hspi->hdmatx->XferHalfCpltCallback = SPI_DMAHalfTransmitCplt;
-
- /* Set the SPI TxDMA transfer complete callback */
- hspi->hdmatx->XferCpltCallback = SPI_DMATransmitCplt;
-
- /* Set the DMA error callback */
- hspi->hdmatx->XferErrorCallback = SPI_DMAError;
-
- /* Enable the Tx DMA Stream */
- HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, hspi->TxXferCount);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspi);
-
- /* Check if the SPI is already enabled */
- if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
- {
- /* Enable SPI peripheral */
- __HAL_SPI_ENABLE(hspi);
- }
-
- /* Enable Tx DMA Request */
- hspi->Instance->CR2 |= SPI_CR2_TXDMAEN;
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receive an amount of data in no-blocking mode with DMA
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @param pData: pointer to data buffer
- * @note When the CRC feature is enabled the pData Length must be Size + 1.
- * @param Size: amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size)
-{
- if(hspi->State == HAL_SPI_STATE_READY)
- {
- if((pData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hspi);
-
- /* Configure communication */
- hspi->State = HAL_SPI_STATE_BUSY_RX;
- hspi->ErrorCode = HAL_SPI_ERROR_NONE;
-
- hspi->pRxBuffPtr = pData;
- hspi->RxXferSize = Size;
- hspi->RxXferCount = Size;
-
- /*Init field not used in handle to zero */
- hspi->RxISR = 0;
- hspi->TxISR = 0;
- hspi->TxXferSize = 0;
- hspi->TxXferCount = 0;
-
- /* Configure communication direction : 1Line */
- if(hspi->Init.Direction == SPI_DIRECTION_1LINE)
- {
- SPI_1LINE_RX(hspi);
- }
- else if((hspi->Init.Direction == SPI_DIRECTION_2LINES)&&(hspi->Init.Mode == SPI_MODE_MASTER))
- {
- /* Process Unlocked */
- __HAL_UNLOCK(hspi);
-
- /* Call transmit-receive function to send Dummy data on Tx line and generate clock on CLK line */
- return HAL_SPI_TransmitReceive_DMA(hspi, pData, pData, Size);
- }
-
- /* Reset CRC Calculation */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- SPI_RESET_CRC(hspi);
- }
-
- /* Set the SPI RxDMA Half transfer complete callback */
- hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt;
-
- /* Set the SPI Rx DMA transfer complete callback */
- hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt;
-
- /* Set the DMA error callback */
- hspi->hdmarx->XferErrorCallback = SPI_DMAError;
-
- /* Enable the Rx DMA Stream */
- HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, hspi->RxXferCount);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspi);
-
- /* Check if the SPI is already enabled */
- if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
- {
- /* Enable SPI peripheral */
- __HAL_SPI_ENABLE(hspi);
- }
-
- /* Enable Rx DMA Request */
- hspi->Instance->CR2 |= SPI_CR2_RXDMAEN;
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Transmit and Receive an amount of data in no-blocking mode with DMA
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @param pTxData: pointer to transmission data buffer
- * @param pRxData: pointer to reception data buffer
- * @note When the CRC feature is enabled the pRxData Length must be Size + 1
- * @param Size: amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
-{
- uint32_t tmpstate = 0;
- tmpstate = hspi->State;
- if((tmpstate == HAL_SPI_STATE_READY) || ((hspi->Init.Mode == SPI_MODE_MASTER) && \
- (hspi->Init.Direction == SPI_DIRECTION_2LINES) && (tmpstate == HAL_SPI_STATE_BUSY_RX)))
- {
- if((pTxData == NULL ) || (pRxData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_SPI_DIRECTION_2LINES(hspi->Init.Direction));
-
- /* Process locked */
- __HAL_LOCK(hspi);
-
- /* Don't overwrite in case of HAL_SPI_STATE_BUSY_RX */
- if(hspi->State != HAL_SPI_STATE_BUSY_RX)
- {
- hspi->State = HAL_SPI_STATE_BUSY_TX_RX;
- }
-
- /* Configure communication */
- hspi->ErrorCode = HAL_SPI_ERROR_NONE;
-
- hspi->pTxBuffPtr = (uint8_t*)pTxData;
- hspi->TxXferSize = Size;
- hspi->TxXferCount = Size;
-
- hspi->pRxBuffPtr = (uint8_t*)pRxData;
- hspi->RxXferSize = Size;
- hspi->RxXferCount = Size;
-
- /*Init field not used in handle to zero */
- hspi->RxISR = 0;
- hspi->TxISR = 0;
-
- /* Reset CRC Calculation */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- SPI_RESET_CRC(hspi);
- }
-
- /* Check if we are in Rx only or in Rx/Tx Mode and configure the DMA transfer complete callback */
- if(hspi->State == HAL_SPI_STATE_BUSY_RX)
- {
- /* Set the SPI Rx DMA Half transfer complete callback */
- hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfReceiveCplt;
-
- hspi->hdmarx->XferCpltCallback = SPI_DMAReceiveCplt;
- }
- else
- {
- /* Set the SPI Tx/Rx DMA Half transfer complete callback */
- hspi->hdmarx->XferHalfCpltCallback = SPI_DMAHalfTransmitReceiveCplt;
-
- hspi->hdmarx->XferCpltCallback = SPI_DMATransmitReceiveCplt;
- }
-
- /* Set the DMA error callback */
- hspi->hdmarx->XferErrorCallback = SPI_DMAError;
-
- /* Enable the Rx DMA Stream */
- HAL_DMA_Start_IT(hspi->hdmarx, (uint32_t)&hspi->Instance->DR, (uint32_t)hspi->pRxBuffPtr, hspi->RxXferCount);
-
- /* Enable Rx DMA Request */
- hspi->Instance->CR2 |= SPI_CR2_RXDMAEN;
-
- /* Set the SPI Tx DMA transfer complete callback as NULL because the communication closing
- is performed in DMA reception complete callback */
- hspi->hdmatx->XferCpltCallback = NULL;
-
- if(hspi->State == HAL_SPI_STATE_BUSY_TX_RX)
- {
- /* Set the DMA error callback */
- hspi->hdmatx->XferErrorCallback = SPI_DMAError;
- }
- else
- {
- hspi->hdmatx->XferErrorCallback = NULL;
- }
-
- /* Enable the Tx DMA Stream */
- HAL_DMA_Start_IT(hspi->hdmatx, (uint32_t)hspi->pTxBuffPtr, (uint32_t)&hspi->Instance->DR, hspi->TxXferCount);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspi);
-
- /* Check if the SPI is already enabled */
- if((hspi->Instance->CR1 &SPI_CR1_SPE) != SPI_CR1_SPE)
- {
- /* Enable SPI peripheral */
- __HAL_SPI_ENABLE(hspi);
- }
-
- /* Enable Tx DMA Request */
- hspi->Instance->CR2 |= SPI_CR2_TXDMAEN;
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Pauses the DMA Transfer.
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for the specified SPI module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi)
-{
- /* Process Locked */
- __HAL_LOCK(hspi);
-
- /* Disable the SPI DMA Tx & Rx requests */
- hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
- hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspi);
-
- return HAL_OK;
-}
-
-/**
- * @brief Resumes the DMA Transfer.
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for the specified SPI module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi)
-{
- /* Process Locked */
- __HAL_LOCK(hspi);
-
- /* Enable the SPI DMA Tx & Rx requests */
- hspi->Instance->CR2 |= SPI_CR2_TXDMAEN;
- hspi->Instance->CR2 |= SPI_CR2_RXDMAEN;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspi);
-
- return HAL_OK;
-}
-
-/**
- * @brief Stops the DMA Transfer.
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for the specified SPI module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi)
-{
- /* The Lock is not implemented on this API to allow the user application
- to call the HAL SPI API under callbacks HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback():
- when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
- and the correspond call back is executed HAL_SPI_TxCpltCallback() or HAL_SPI_RxCpltCallback() or HAL_SPI_TxRxCpltCallback()
- */
-
- /* Abort the SPI DMA tx Stream */
- if(hspi->hdmatx != NULL)
- {
- HAL_DMA_Abort(hspi->hdmatx);
- }
- /* Abort the SPI DMA rx Stream */
- if(hspi->hdmarx != NULL)
- {
- HAL_DMA_Abort(hspi->hdmarx);
- }
-
- /* Disable the SPI DMA Tx & Rx requests */
- hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
- hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
-
- hspi->State = HAL_SPI_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief This function handles SPI interrupt request.
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @retval HAL status
- */
-void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi)
-{
- uint32_t tmp1 = 0, tmp2 = 0, tmp3 = 0;
-
- tmp1 = __HAL_SPI_GET_FLAG(hspi, SPI_FLAG_RXNE);
- tmp2 = __HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_RXNE);
- tmp3 = __HAL_SPI_GET_FLAG(hspi, SPI_FLAG_OVR);
- /* SPI in mode Receiver and Overrun not occurred ---------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET) && (tmp3 == RESET))
- {
- hspi->RxISR(hspi);
- return;
- }
-
- tmp1 = __HAL_SPI_GET_FLAG(hspi, SPI_FLAG_TXE);
- tmp2 = __HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_TXE);
- /* SPI in mode Transmitter ---------------------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- hspi->TxISR(hspi);
- return;
- }
-
- if(__HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_ERR) != RESET)
- {
- /* SPI CRC error interrupt occurred ---------------------------------------*/
- if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
- __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
- }
- /* SPI Mode Fault error interrupt occurred --------------------------------*/
- if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_MODF) != RESET)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_MODF;
- __HAL_SPI_CLEAR_MODFFLAG(hspi);
- }
-
- /* SPI Overrun error interrupt occurred -----------------------------------*/
- if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_OVR) != RESET)
- {
- if(hspi->State != HAL_SPI_STATE_BUSY_TX)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_OVR;
- __HAL_SPI_CLEAR_OVRFLAG(hspi);
- }
- }
-
- /* SPI Frame error interrupt occurred -------------------------------------*/
- if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_FRE) != RESET)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_FRE;
- __HAL_SPI_CLEAR_FREFLAG(hspi);
- }
-
- /* Call the Error call Back in case of Errors */
- if(hspi->ErrorCode!=HAL_SPI_ERROR_NONE)
- {
- hspi->State = HAL_SPI_STATE_READY;
- HAL_SPI_ErrorCallback(hspi);
- }
- }
-}
-
-/**
- * @brief Tx Transfer completed callbacks
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @retval None
- */
-__weak void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPI_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Transfer completed callbacks
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @retval None
- */
-__weak void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPI_RxCpltCallback() could be implemented in the user file
- */
-}
-
-/**
- * @brief Tx and Rx Transfer completed callbacks
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @retval None
- */
-__weak void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPI_TxRxCpltCallback() could be implemented in the user file
- */
-}
-
-/**
- * @brief Tx Half Transfer completed callbacks
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @retval None
- */
-__weak void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPI_TxHalfCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Half Transfer completed callbacks
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @retval None
- */
-__weak void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPI_RxHalfCpltCallback() could be implemented in the user file
- */
-}
-
-/**
- * @brief Tx and Rx Transfer completed callbacks
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @retval None
- */
-__weak void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SPI_TxRxHalfCpltCallback() could be implemented in the user file
- */
-}
-
-/**
- * @brief SPI error callbacks
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @retval None
- */
- __weak void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi)
-{
- /* NOTE : - This function Should not be modified, when the callback is needed,
- the HAL_SPI_ErrorCallback() could be implemented in the user file.
- - The ErrorCode parameter in the hspi handle is updated by the SPI processes
- and user can use HAL_SPI_GetError() API to check the latest error occurred.
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup SPI_Exported_Functions_Group3 Peripheral State and Errors functions
- * @brief SPI control functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral State and Errors functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to control the SPI.
- (+) HAL_SPI_GetState() API can be helpful to check in run-time the state of the SPI peripheral
- (+) HAL_SPI_GetError() check in run-time Errors occurring during communication
-@endverbatim
- * @{
- */
-
-/**
- * @brief Return the SPI state
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @retval HAL state
- */
-HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi)
-{
- return hspi->State;
-}
-
-/**
- * @brief Return the SPI error code
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @retval SPI Error Code
- */
-uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi)
-{
- return hspi->ErrorCode;
-}
-
-/**
- * @}
- */
-
- /**
- * @brief Interrupt Handler to close Tx transfer
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @retval void
- */
-static void SPI_TxCloseIRQHandler(SPI_HandleTypeDef *hspi)
-{
- /* Wait until TXE flag is set to send data */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
- }
-
- /* Disable TXE interrupt */
- __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE ));
-
- /* Disable ERR interrupt if Receive process is finished */
- if(__HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_RXNE) == RESET)
- {
- __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_ERR));
-
- /* Wait until Busy flag is reset before disabling SPI */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, SPI_TIMEOUT_VALUE) != HAL_OK)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
- }
-
- /* Clear OVERRUN flag in 2 Lines communication mode because received is not read */
- if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
- {
- __HAL_SPI_CLEAR_OVRFLAG(hspi);
- }
-
- /* Check if Errors has been detected during transfer */
- if(hspi->ErrorCode == HAL_SPI_ERROR_NONE)
- {
- /* Check if we are in Tx or in Rx/Tx Mode */
- if(hspi->State == HAL_SPI_STATE_BUSY_TX_RX)
- {
- /* Set state to READY before run the Callback Complete */
- hspi->State = HAL_SPI_STATE_READY;
- HAL_SPI_TxRxCpltCallback(hspi);
- }
- else
- {
- /* Set state to READY before run the Callback Complete */
- hspi->State = HAL_SPI_STATE_READY;
- HAL_SPI_TxCpltCallback(hspi);
- }
- }
- else
- {
- /* Set state to READY before run the Callback Complete */
- hspi->State = HAL_SPI_STATE_READY;
- /* Call Error call back in case of Error */
- HAL_SPI_ErrorCallback(hspi);
- }
- }
-}
-
-/**
- * @brief Interrupt Handler to transmit amount of data in no-blocking mode
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @retval void
- */
-static void SPI_TxISR(SPI_HandleTypeDef *hspi)
-{
- /* Transmit data in 8 Bit mode */
- if(hspi->Init.DataSize == SPI_DATASIZE_8BIT)
- {
- hspi->Instance->DR = (*hspi->pTxBuffPtr++);
- }
- /* Transmit data in 16 Bit mode */
- else
- {
- hspi->Instance->DR = *((uint16_t*)hspi->pTxBuffPtr);
- hspi->pTxBuffPtr+=2;
- }
- hspi->TxXferCount--;
-
- if(hspi->TxXferCount == 0)
- {
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- /* calculate and transfer CRC on Tx line */
- hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
- }
- SPI_TxCloseIRQHandler(hspi);
- }
-}
-
-/**
- * @brief Interrupt Handler to close Rx transfer
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @retval void
- */
-static void SPI_RxCloseIRQHandler(SPI_HandleTypeDef *hspi)
-{
- __IO uint16_t tmpreg;
-
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- /* Wait until RXNE flag is set to send data */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
- }
-
- /* Read CRC to reset RXNE flag */
- tmpreg = hspi->Instance->DR;
- UNUSED(tmpreg);
-
- /* Wait until RXNE flag is set to send data */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_TIMEOUT_VALUE) != HAL_OK)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
- }
-
- /* Check if CRC error occurred */
- if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
-
- /* Reset CRC Calculation */
- SPI_RESET_CRC(hspi);
- }
- }
-
- /* Disable RXNE and ERR interrupt */
- __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_RXNE));
-
- /* if Transmit process is finished */
- if(__HAL_SPI_GET_IT_SOURCE(hspi, SPI_IT_TXE) == RESET)
- {
- /* Disable ERR interrupt */
- __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_ERR));
-
- if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
- {
- /* Disable SPI peripheral */
- __HAL_SPI_DISABLE(hspi);
- }
-
- /* Check if Errors has been detected during transfer */
- if(hspi->ErrorCode == HAL_SPI_ERROR_NONE)
- {
- /* Check if we are in Rx or in Rx/Tx Mode */
- if(hspi->State == HAL_SPI_STATE_BUSY_TX_RX)
- {
- /* Set state to READY before run the Callback Complete */
- hspi->State = HAL_SPI_STATE_READY;
- HAL_SPI_TxRxCpltCallback(hspi);
- }
- else
- {
- /* Set state to READY before run the Callback Complete */
- hspi->State = HAL_SPI_STATE_READY;
- HAL_SPI_RxCpltCallback(hspi);
- }
- }
- else
- {
- /* Set state to READY before run the Callback Complete */
- hspi->State = HAL_SPI_STATE_READY;
- /* Call Error call back in case of Error */
- HAL_SPI_ErrorCallback(hspi);
- }
- }
-}
-
-/**
- * @brief Interrupt Handler to receive amount of data in 2Lines mode
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @retval void
- */
-static void SPI_2LinesRxISR(SPI_HandleTypeDef *hspi)
-{
- /* Receive data in 8 Bit mode */
- if(hspi->Init.DataSize == SPI_DATASIZE_8BIT)
- {
- (*hspi->pRxBuffPtr++) = hspi->Instance->DR;
- }
- /* Receive data in 16 Bit mode */
- else
- {
- *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
- hspi->pRxBuffPtr+=2;
- }
- hspi->RxXferCount--;
-
- if(hspi->RxXferCount==0)
- {
- SPI_RxCloseIRQHandler(hspi);
- }
-}
-
-/**
- * @brief Interrupt Handler to receive amount of data in no-blocking mode
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @retval void
- */
-static void SPI_RxISR(SPI_HandleTypeDef *hspi)
-{
- /* Receive data in 8 Bit mode */
- if(hspi->Init.DataSize == SPI_DATASIZE_8BIT)
- {
- (*hspi->pRxBuffPtr++) = hspi->Instance->DR;
- }
- /* Receive data in 16 Bit mode */
- else
- {
- *((uint16_t*)hspi->pRxBuffPtr) = hspi->Instance->DR;
- hspi->pRxBuffPtr+=2;
- }
- hspi->RxXferCount--;
-
- /* Enable CRC Transmission */
- if((hspi->RxXferCount == 1) && (hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE))
- {
- /* Set CRC Next to calculate CRC on Rx side */
- hspi->Instance->CR1 |= SPI_CR1_CRCNEXT;
- }
-
- if(hspi->RxXferCount == 0)
- {
- SPI_RxCloseIRQHandler(hspi);
- }
-}
-
-/**
- * @brief DMA SPI transmit process complete callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void SPI_DMATransmitCplt(DMA_HandleTypeDef *hdma)
-{
- SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- /* DMA Normal Mode */
- if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
- {
- /* Wait until TXE flag is set to send data */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
- }
- /* Disable Tx DMA Request */
- hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
-
- /* Wait until Busy flag is reset before disabling SPI */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, SPI_TIMEOUT_VALUE) != HAL_OK)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
- }
-
- hspi->TxXferCount = 0;
-
- hspi->State = HAL_SPI_STATE_READY;
- }
-
- /* Clear OVERRUN flag in 2 Lines communication mode because received is not read */
- if(hspi->Init.Direction == SPI_DIRECTION_2LINES)
- {
- __HAL_SPI_CLEAR_OVRFLAG(hspi);
- }
-
- /* Check if Errors has been detected during transfer */
- if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
- {
- HAL_SPI_ErrorCallback(hspi);
- }
- else
- {
- HAL_SPI_TxCpltCallback(hspi);
- }
-}
-
-/**
- * @brief DMA SPI receive process complete callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void SPI_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
-{
- __IO uint16_t tmpreg;
-
- SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- /* DMA Normal mode */
- if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
- {
- if((hspi->Init.Direction == SPI_DIRECTION_2LINES)&&(hspi->Init.Mode == SPI_MODE_MASTER))
- {
- SPI_DMAEndTransmitReceive(hspi);
- }
- /* SPI_DIRECTION_1LINE or SPI_DIRECTION_2LINES_RXONLY */
- else
- {
- if((hspi->Init.Mode == SPI_MODE_MASTER)&&((hspi->Init.Direction == SPI_DIRECTION_1LINE)||(hspi->Init.Direction == SPI_DIRECTION_2LINES_RXONLY)))
- {
- /* Disable SPI peripheral */
- __HAL_SPI_DISABLE(hspi);
- }
-
- /* Disable Rx DMA Request */
- hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
-
- hspi->RxXferCount = 0;
-
- /* Reset CRC Calculation */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- /* Wait until RXNE flag is set to send data */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
- }
-
- /* Read CRC */
- tmpreg = hspi->Instance->DR;
- UNUSED(tmpreg);
-
- /* Wait until RXNE flag is set */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_TIMEOUT_VALUE) != HAL_OK)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
- }
-
- /* Check if CRC error occurred */
- if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
- __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
- }
- }
- }
-
- hspi->State = HAL_SPI_STATE_READY;
-
- /* Check if Errors has been detected during transfer */
- if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
- {
- HAL_SPI_ErrorCallback(hspi);
- }
- else
- {
- HAL_SPI_RxCpltCallback(hspi);
- }
- }
- else
- {
- HAL_SPI_RxCpltCallback(hspi);
- }
-}
-
-/**
- * @brief End DMA SPI transmit receive process
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @retval None
- */
-static void SPI_DMAEndTransmitReceive(SPI_HandleTypeDef *hspi)
-{
- __IO uint16_t tmpreg;
-
- /* Reset CRC Calculation */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- /* Check if CRC is done on going (RXNE flag set) */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, SET, SPI_TIMEOUT_VALUE) == HAL_OK)
- {
- /* Wait until RXNE flag is set to send data */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_RXNE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
- }
- }
- /* Read CRC */
- tmpreg = hspi->Instance->DR;
- UNUSED(tmpreg);
-
- /* Check if CRC error occurred */
- if(__HAL_SPI_GET_FLAG(hspi, SPI_FLAG_CRCERR) != RESET)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_CRC;
- __HAL_SPI_CLEAR_CRCERRFLAG(hspi);
- }
- }
-
- /* Wait until TXE flag is set to send data */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_TXE, RESET, SPI_TIMEOUT_VALUE) != HAL_OK)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
- }
- /* Disable Tx DMA Request */
- hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_TXDMAEN);
-
- /* Wait until Busy flag is reset before disabling SPI */
- if(SPI_WaitOnFlagUntilTimeout(hspi, SPI_FLAG_BSY, SET, SPI_TIMEOUT_VALUE) != HAL_OK)
- {
- hspi->ErrorCode |= HAL_SPI_ERROR_FLAG;
- }
-
- /* Disable Rx DMA Request */
- hspi->Instance->CR2 &= (uint32_t)(~SPI_CR2_RXDMAEN);
-
- hspi->TxXferCount = 0;
- hspi->RxXferCount = 0;
-}
-
-/**
- * @brief DMA SPI transmit receive process complete callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void SPI_DMATransmitReceiveCplt(DMA_HandleTypeDef *hdma)
-{
- SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
- { /**/
- SPI_DMAEndTransmitReceive(hspi);
-
- hspi->State = HAL_SPI_STATE_READY;
-
- /* Check if Errors has been detected during transfer */
- if(hspi->ErrorCode != HAL_SPI_ERROR_NONE)
- {
- HAL_SPI_ErrorCallback(hspi);
- }
- else
- {
- HAL_SPI_TxRxCpltCallback(hspi);
- }
- }
- else
- {
- HAL_SPI_TxRxCpltCallback(hspi);
- }
-}
-
-/**
- * @brief DMA SPI half transmit process complete callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void SPI_DMAHalfTransmitCplt(DMA_HandleTypeDef *hdma)
-{
- SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- HAL_SPI_TxHalfCpltCallback(hspi);
-}
-
-/**
- * @brief DMA SPI half receive process complete callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void SPI_DMAHalfReceiveCplt(DMA_HandleTypeDef *hdma)
-{
- SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- HAL_SPI_RxHalfCpltCallback(hspi);
-}
-
-/**
- * @brief DMA SPI Half transmit receive process complete callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void SPI_DMAHalfTransmitReceiveCplt(DMA_HandleTypeDef *hdma)
-{
- SPI_HandleTypeDef* hspi = ( SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- HAL_SPI_TxRxHalfCpltCallback(hspi);
-}
-
-/**
- * @brief DMA SPI communication error callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void SPI_DMAError(DMA_HandleTypeDef *hdma)
-{
- SPI_HandleTypeDef* hspi = (SPI_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- hspi->TxXferCount = 0;
- hspi->RxXferCount = 0;
- hspi->State= HAL_SPI_STATE_READY;
- hspi->ErrorCode |= HAL_SPI_ERROR_DMA;
- HAL_SPI_ErrorCallback(hspi);
-}
-
-/**
- * @brief This function handles SPI Communication Timeout.
- * @param hspi: pointer to a SPI_HandleTypeDef structure that contains
- * the configuration information for SPI module.
- * @param Flag: SPI flag to check
- * @param Status: Flag status to check: RESET or set
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-static HAL_StatusTypeDef SPI_WaitOnFlagUntilTimeout(SPI_HandleTypeDef *hspi, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait until flag is set */
- if(Status == RESET)
- {
- while(__HAL_SPI_GET_FLAG(hspi, Flag) == RESET)
- {
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Disable the SPI and reset the CRC: the CRC value should be cleared
- on both master and slave sides in order to resynchronize the master
- and slave for their respective CRC calculation */
-
- /* Disable TXE, RXNE and ERR interrupts for the interrupt process */
- __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
-
- /* Disable SPI peripheral */
- __HAL_SPI_DISABLE(hspi);
-
- /* Reset CRC Calculation */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- SPI_RESET_CRC(hspi);
- }
-
- hspi->State= HAL_SPI_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspi);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- else
- {
- while(__HAL_SPI_GET_FLAG(hspi, Flag) != RESET)
- {
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Disable the SPI and reset the CRC: the CRC value should be cleared
- on both master and slave sides in order to resynchronize the master
- and slave for their respective CRC calculation */
-
- /* Disable TXE, RXNE and ERR interrupts for the interrupt process */
- __HAL_SPI_DISABLE_IT(hspi, (SPI_IT_TXE | SPI_IT_RXNE | SPI_IT_ERR));
-
- /* Disable SPI peripheral */
- __HAL_SPI_DISABLE(hspi);
-
- /* Reset CRC Calculation */
- if(hspi->Init.CRCCalculation == SPI_CRCCALCULATION_ENABLE)
- {
- SPI_RESET_CRC(hspi);
- }
-
- hspi->State= HAL_SPI_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hspi);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- return HAL_OK;
-}
-
-
-/**
- * @}
- */
-
-#endif /* HAL_SPI_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c
deleted file mode 100644
index 6cb0a7f..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_sram.c
+++ /dev/null
@@ -1,682 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_sram.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief SRAM HAL module driver.
- * This file provides a generic firmware to drive SRAM memories
- * mounted as external device.
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- This driver is a generic layered driver which contains a set of APIs used to
- control SRAM memories. It uses the FMC layer functions to interface
- with SRAM devices.
- The following sequence should be followed to configure the FMC/FSMC to interface
- with SRAM/PSRAM memories:
-
- (#) Declare a SRAM_HandleTypeDef handle structure, for example:
- SRAM_HandleTypeDef hsram; and:
-
- (++) Fill the SRAM_HandleTypeDef handle "Init" field with the allowed
- values of the structure member.
-
- (++) Fill the SRAM_HandleTypeDef handle "Instance" field with a predefined
- base register instance for NOR or SRAM device
-
- (++) Fill the SRAM_HandleTypeDef handle "Extended" field with a predefined
- base register instance for NOR or SRAM extended mode
-
- (#) Declare two FMC_NORSRAM_TimingTypeDef structures, for both normal and extended
- mode timings; for example:
- FMC_NORSRAM_TimingTypeDef Timing and FMC_NORSRAM_TimingTypeDef ExTiming;
- and fill its fields with the allowed values of the structure member.
-
- (#) Initialize the SRAM Controller by calling the function HAL_SRAM_Init(). This function
- performs the following sequence:
-
- (##) MSP hardware layer configuration using the function HAL_SRAM_MspInit()
- (##) Control register configuration using the FMC NORSRAM interface function
- FMC_NORSRAM_Init()
- (##) Timing register configuration using the FMC NORSRAM interface function
- FMC_NORSRAM_Timing_Init()
- (##) Extended mode Timing register configuration using the FMC NORSRAM interface function
- FMC_NORSRAM_Extended_Timing_Init()
- (##) Enable the SRAM device using the macro __FMC_NORSRAM_ENABLE()
-
- (#) At this stage you can perform read/write accesses from/to the memory connected
- to the NOR/SRAM Bank. You can perform either polling or DMA transfer using the
- following APIs:
- (++) HAL_SRAM_Read()/HAL_SRAM_Write() for polling read/write access
- (++) HAL_SRAM_Read_DMA()/HAL_SRAM_Write_DMA() for DMA read/write transfer
-
- (#) You can also control the SRAM device by calling the control APIs HAL_SRAM_WriteOperation_Enable()/
- HAL_SRAM_WriteOperation_Disable() to respectively enable/disable the SRAM write operation
-
- (#) You can continuously monitor the SRAM device HAL state by calling the function
- HAL_SRAM_GetState()
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup SRAM SRAM
- * @brief SRAM driver modules
- * @{
- */
-#ifdef HAL_SRAM_MODULE_ENABLED
-
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
- defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
- defined(STM32F446xx)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup SRAM_Exported_Functions SRAM Exported Functions
- * @{
- */
-/** @defgroup SRAM_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
- @verbatim
- ==============================================================================
- ##### SRAM Initialization and de_initialization functions #####
- ==============================================================================
- [..] This section provides functions allowing to initialize/de-initialize
- the SRAM memory
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Performs the SRAM device initialization sequence
- * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
- * the configuration information for SRAM module.
- * @param Timing: Pointer to SRAM control timing structure
- * @param ExtTiming: Pointer to SRAM extended mode timing structure
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming)
-{
- /* Check the SRAM handle parameter */
- if(hsram == NULL)
- {
- return HAL_ERROR;
- }
-
- if(hsram->State == HAL_SRAM_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hsram->Lock = HAL_UNLOCKED;
- /* Initialize the low level hardware (MSP) */
- HAL_SRAM_MspInit(hsram);
- }
-
- /* Initialize SRAM control Interface */
- FMC_NORSRAM_Init(hsram->Instance, &(hsram->Init));
-
- /* Initialize SRAM timing Interface */
- FMC_NORSRAM_Timing_Init(hsram->Instance, Timing, hsram->Init.NSBank);
-
- /* Initialize SRAM extended mode timing Interface */
- FMC_NORSRAM_Extended_Timing_Init(hsram->Extended, ExtTiming, hsram->Init.NSBank, hsram->Init.ExtendedMode);
-
- /* Enable the NORSRAM device */
- __FMC_NORSRAM_ENABLE(hsram->Instance, hsram->Init.NSBank);
-
- return HAL_OK;
-}
-
-/**
- * @brief Performs the SRAM device De-initialization sequence.
- * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
- * the configuration information for SRAM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram)
-{
- /* De-Initialize the low level hardware (MSP) */
- HAL_SRAM_MspDeInit(hsram);
-
- /* Configure the SRAM registers with their reset values */
- FMC_NORSRAM_DeInit(hsram->Instance, hsram->Extended, hsram->Init.NSBank);
-
- hsram->State = HAL_SRAM_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hsram);
-
- return HAL_OK;
-}
-
-/**
- * @brief SRAM MSP Init.
- * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
- * the configuration information for SRAM module.
- * @retval None
- */
-__weak void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SRAM_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief SRAM MSP DeInit.
- * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
- * the configuration information for SRAM module.
- * @retval None
- */
-__weak void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SRAM_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DMA transfer complete callback.
- * @param hdma: pointer to a SRAM_HandleTypeDef structure that contains
- * the configuration information for SRAM module.
- * @retval None
- */
-__weak void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SRAM_DMA_XferCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief DMA transfer complete error callback.
- * @param hdma: pointer to a SRAM_HandleTypeDef structure that contains
- * the configuration information for SRAM module.
- * @retval None
- */
-__weak void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_SRAM_DMA_XferErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup SRAM_Exported_Functions_Group2 Input and Output functions
- * @brief Input Output and memory control functions
- *
- @verbatim
- ==============================================================================
- ##### SRAM Input and Output functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to use and control the SRAM memory
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Reads 8-bit buffer from SRAM memory.
- * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
- * the configuration information for SRAM module.
- * @param pAddress: Pointer to read start address
- * @param pDstBuffer: Pointer to destination buffer
- * @param BufferSize: Size of the buffer to read from memory
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize)
-{
- __IO uint8_t * pSramAddress = (uint8_t *)pAddress;
-
- /* Process Locked */
- __HAL_LOCK(hsram);
-
- /* Update the SRAM controller state */
- hsram->State = HAL_SRAM_STATE_BUSY;
-
- /* Read data from memory */
- for(; BufferSize != 0; BufferSize--)
- {
- *pDstBuffer = *(__IO uint8_t *)pSramAddress;
- pDstBuffer++;
- pSramAddress++;
- }
-
- /* Update the SRAM controller state */
- hsram->State = HAL_SRAM_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hsram);
-
- return HAL_OK;
-}
-
-/**
- * @brief Writes 8-bit buffer to SRAM memory.
- * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
- * the configuration information for SRAM module.
- * @param pAddress: Pointer to write start address
- * @param pSrcBuffer: Pointer to source buffer to write
- * @param BufferSize: Size of the buffer to write to memory
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize)
-{
- __IO uint8_t * pSramAddress = (uint8_t *)pAddress;
-
- /* Check the SRAM controller state */
- if(hsram->State == HAL_SRAM_STATE_PROTECTED)
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hsram);
-
- /* Update the SRAM controller state */
- hsram->State = HAL_SRAM_STATE_BUSY;
-
- /* Write data to memory */
- for(; BufferSize != 0; BufferSize--)
- {
- *(__IO uint8_t *)pSramAddress = *pSrcBuffer;
- pSrcBuffer++;
- pSramAddress++;
- }
-
- /* Update the SRAM controller state */
- hsram->State = HAL_SRAM_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hsram);
-
- return HAL_OK;
-}
-
-/**
- * @brief Reads 16-bit buffer from SRAM memory.
- * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
- * the configuration information for SRAM module.
- * @param pAddress: Pointer to read start address
- * @param pDstBuffer: Pointer to destination buffer
- * @param BufferSize: Size of the buffer to read from memory
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize)
-{
- __IO uint16_t * pSramAddress = (uint16_t *)pAddress;
-
- /* Process Locked */
- __HAL_LOCK(hsram);
-
- /* Update the SRAM controller state */
- hsram->State = HAL_SRAM_STATE_BUSY;
-
- /* Read data from memory */
- for(; BufferSize != 0; BufferSize--)
- {
- *pDstBuffer = *(__IO uint16_t *)pSramAddress;
- pDstBuffer++;
- pSramAddress++;
- }
-
- /* Update the SRAM controller state */
- hsram->State = HAL_SRAM_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hsram);
-
- return HAL_OK;
-}
-
-/**
- * @brief Writes 16-bit buffer to SRAM memory.
- * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
- * the configuration information for SRAM module.
- * @param pAddress: Pointer to write start address
- * @param pSrcBuffer: Pointer to source buffer to write
- * @param BufferSize: Size of the buffer to write to memory
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize)
-{
- __IO uint16_t * pSramAddress = (uint16_t *)pAddress;
-
- /* Check the SRAM controller state */
- if(hsram->State == HAL_SRAM_STATE_PROTECTED)
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hsram);
-
- /* Update the SRAM controller state */
- hsram->State = HAL_SRAM_STATE_BUSY;
-
- /* Write data to memory */
- for(; BufferSize != 0; BufferSize--)
- {
- *(__IO uint16_t *)pSramAddress = *pSrcBuffer;
- pSrcBuffer++;
- pSramAddress++;
- }
-
- /* Update the SRAM controller state */
- hsram->State = HAL_SRAM_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hsram);
-
- return HAL_OK;
-}
-
-/**
- * @brief Reads 32-bit buffer from SRAM memory.
- * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
- * the configuration information for SRAM module.
- * @param pAddress: Pointer to read start address
- * @param pDstBuffer: Pointer to destination buffer
- * @param BufferSize: Size of the buffer to read from memory
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
-{
- /* Process Locked */
- __HAL_LOCK(hsram);
-
- /* Update the SRAM controller state */
- hsram->State = HAL_SRAM_STATE_BUSY;
-
- /* Read data from memory */
- for(; BufferSize != 0; BufferSize--)
- {
- *pDstBuffer = *(__IO uint32_t *)pAddress;
- pDstBuffer++;
- pAddress++;
- }
-
- /* Update the SRAM controller state */
- hsram->State = HAL_SRAM_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hsram);
-
- return HAL_OK;
-}
-
-/**
- * @brief Writes 32-bit buffer to SRAM memory.
- * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
- * the configuration information for SRAM module.
- * @param pAddress: Pointer to write start address
- * @param pSrcBuffer: Pointer to source buffer to write
- * @param BufferSize: Size of the buffer to write to memory
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
-{
- /* Check the SRAM controller state */
- if(hsram->State == HAL_SRAM_STATE_PROTECTED)
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hsram);
-
- /* Update the SRAM controller state */
- hsram->State = HAL_SRAM_STATE_BUSY;
-
- /* Write data to memory */
- for(; BufferSize != 0; BufferSize--)
- {
- *(__IO uint32_t *)pAddress = *pSrcBuffer;
- pSrcBuffer++;
- pAddress++;
- }
-
- /* Update the SRAM controller state */
- hsram->State = HAL_SRAM_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hsram);
-
- return HAL_OK;
-}
-
-/**
- * @brief Reads a Words data from the SRAM memory using DMA transfer.
- * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
- * the configuration information for SRAM module.
- * @param pAddress: Pointer to read start address
- * @param pDstBuffer: Pointer to destination buffer
- * @param BufferSize: Size of the buffer to read from memory
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize)
-{
- /* Process Locked */
- __HAL_LOCK(hsram);
-
- /* Update the SRAM controller state */
- hsram->State = HAL_SRAM_STATE_BUSY;
-
- /* Configure DMA user callbacks */
- hsram->hdma->XferCpltCallback = HAL_SRAM_DMA_XferCpltCallback;
- hsram->hdma->XferErrorCallback = HAL_SRAM_DMA_XferErrorCallback;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pAddress, (uint32_t)pDstBuffer, (uint32_t)BufferSize);
-
- /* Update the SRAM controller state */
- hsram->State = HAL_SRAM_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hsram);
-
- return HAL_OK;
-}
-
-/**
- * @brief Writes a Words data buffer to SRAM memory using DMA transfer.
- * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
- * the configuration information for SRAM module.
- * @param pAddress: Pointer to write start address
- * @param pSrcBuffer: Pointer to source buffer to write
- * @param BufferSize: Size of the buffer to write to memory
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize)
-{
- /* Check the SRAM controller state */
- if(hsram->State == HAL_SRAM_STATE_PROTECTED)
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(hsram);
-
- /* Update the SRAM controller state */
- hsram->State = HAL_SRAM_STATE_BUSY;
-
- /* Configure DMA user callbacks */
- hsram->hdma->XferCpltCallback = HAL_SRAM_DMA_XferCpltCallback;
- hsram->hdma->XferErrorCallback = HAL_SRAM_DMA_XferErrorCallback;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(hsram->hdma, (uint32_t)pSrcBuffer, (uint32_t)pAddress, (uint32_t)BufferSize);
-
- /* Update the SRAM controller state */
- hsram->State = HAL_SRAM_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hsram);
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup SRAM_Exported_Functions_Group3 Control functions
- * @brief management functions
- *
-@verbatim
- ==============================================================================
- ##### SRAM Control functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to control dynamically
- the SRAM interface.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Enables dynamically SRAM write operation.
- * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
- * the configuration information for SRAM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram)
-{
- /* Process Locked */
- __HAL_LOCK(hsram);
-
- /* Enable write operation */
- FMC_NORSRAM_WriteOperation_Enable(hsram->Instance, hsram->Init.NSBank);
-
- /* Update the SRAM controller state */
- hsram->State = HAL_SRAM_STATE_READY;
-
- /* Process unlocked */
- __HAL_UNLOCK(hsram);
-
- return HAL_OK;
-}
-
-/**
- * @brief Disables dynamically SRAM write operation.
- * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
- * the configuration information for SRAM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram)
-{
- /* Process Locked */
- __HAL_LOCK(hsram);
-
- /* Update the SRAM controller state */
- hsram->State = HAL_SRAM_STATE_BUSY;
-
- /* Disable write operation */
- FMC_NORSRAM_WriteOperation_Disable(hsram->Instance, hsram->Init.NSBank);
-
- /* Update the SRAM controller state */
- hsram->State = HAL_SRAM_STATE_PROTECTED;
-
- /* Process unlocked */
- __HAL_UNLOCK(hsram);
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup SRAM_Exported_Functions_Group4 State functions
- * @brief Peripheral State functions
- *
-@verbatim
- ==============================================================================
- ##### SRAM State functions #####
- ==============================================================================
- [..]
- This subsection permits to get in run-time the status of the SRAM controller
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Returns the SRAM controller state
- * @param hsram: pointer to a SRAM_HandleTypeDef structure that contains
- * the configuration information for SRAM module.
- * @retval HAL state
- */
-HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram)
-{
- return hsram->State;
-}
-/**
- * @}
- */
-
-/**
- * @}
- */
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
-#endif /* HAL_SRAM_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c
deleted file mode 100644
index c1ade71..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim.c
+++ /dev/null
@@ -1,5335 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_tim.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief TIM HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Timer (TIM) peripheral:
- * + Time Base Initialization
- * + Time Base Start
- * + Time Base Start Interruption
- * + Time Base Start DMA
- * + Time Output Compare/PWM Initialization
- * + Time Output Compare/PWM Channel Configuration
- * + Time Output Compare/PWM Start
- * + Time Output Compare/PWM Start Interruption
- * + Time Output Compare/PWM Start DMA
- * + Time Input Capture Initialization
- * + Time Input Capture Channel Configuration
- * + Time Input Capture Start
- * + Time Input Capture Start Interruption
- * + Time Input Capture Start DMA
- * + Time One Pulse Initialization
- * + Time One Pulse Channel Configuration
- * + Time One Pulse Start
- * + Time Encoder Interface Initialization
- * + Time Encoder Interface Start
- * + Time Encoder Interface Start Interruption
- * + Time Encoder Interface Start DMA
- * + Commutation Event configuration with Interruption and DMA
- * + Time OCRef clear configuration
- * + Time External Clock configuration
- @verbatim
- ==============================================================================
- ##### TIMER Generic features #####
- ==============================================================================
- [..] The Timer features include:
- (#) 16-bit up, down, up/down auto-reload counter.
- (#) 16-bit programmable prescaler allowing dividing (also on the fly) the
- counter clock frequency either by any factor between 1 and 65536.
- (#) Up to 4 independent channels for:
- (++) Input Capture
- (++) Output Compare
- (++) PWM generation (Edge and Center-aligned Mode)
- (++) One-pulse mode output
-
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (#) Initialize the TIM low level resources by implementing the following functions
- depending from feature used :
- (++) Time Base : HAL_TIM_Base_MspInit()
- (++) Input Capture : HAL_TIM_IC_MspInit()
- (++) Output Compare : HAL_TIM_OC_MspInit()
- (++) PWM generation : HAL_TIM_PWM_MspInit()
- (++) One-pulse mode output : HAL_TIM_OnePulse_MspInit()
- (++) Encoder mode output : HAL_TIM_Encoder_MspInit()
-
- (#) Initialize the TIM low level resources :
- (##) Enable the TIM interface clock using __TIMx_CLK_ENABLE();
- (##) TIM pins configuration
- (+++) Enable the clock for the TIM GPIOs using the following function:
- __GPIOx_CLK_ENABLE();
- (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
-
- (#) The external Clock can be configured, if needed (the default clock is the
- internal clock from the APBx), using the following function:
- HAL_TIM_ConfigClockSource, the clock configuration should be done before
- any start function.
-
- (#) Configure the TIM in the desired functioning mode using one of the
- initialization function of this driver:
- (++) HAL_TIM_Base_Init: to use the Timer to generate a simple time base
- (++) HAL_TIM_OC_Init and HAL_TIM_OC_ConfigChannel: to use the Timer to generate an
- Output Compare signal.
- (++) HAL_TIM_PWM_Init and HAL_TIM_PWM_ConfigChannel: to use the Timer to generate a
- PWM signal.
- (++) HAL_TIM_IC_Init and HAL_TIM_IC_ConfigChannel: to use the Timer to measure an
- external signal.
- (++) HAL_TIM_OnePulse_Init and HAL_TIM_OnePulse_ConfigChannel: to use the Timer
- in One Pulse Mode.
- (++) HAL_TIM_Encoder_Init: to use the Timer Encoder Interface.
-
- (#) Activate the TIM peripheral using one of the start functions depending from the feature used:
- (++) Time Base : HAL_TIM_Base_Start(), HAL_TIM_Base_Start_DMA(), HAL_TIM_Base_Start_IT()
- (++) Input Capture : HAL_TIM_IC_Start(), HAL_TIM_IC_Start_DMA(), HAL_TIM_IC_Start_IT()
- (++) Output Compare : HAL_TIM_OC_Start(), HAL_TIM_OC_Start_DMA(), HAL_TIM_OC_Start_IT()
- (++) PWM generation : HAL_TIM_PWM_Start(), HAL_TIM_PWM_Start_DMA(), HAL_TIM_PWM_Start_IT()
- (++) One-pulse mode output : HAL_TIM_OnePulse_Start(), HAL_TIM_OnePulse_Start_IT()
- (++) Encoder mode output : HAL_TIM_Encoder_Start(), HAL_TIM_Encoder_Start_DMA(), HAL_TIM_Encoder_Start_IT().
-
- (#) The DMA Burst is managed with the two following functions:
- HAL_TIM_DMABurst_WriteStart()
- HAL_TIM_DMABurst_ReadStart()
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup TIM TIM
- * @brief TIM HAL module driver
- * @{
- */
-
-#ifdef HAL_TIM_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/** @addtogroup TIM_Private_Functions
- * @{
- */
-/* Private function prototypes -----------------------------------------------*/
-static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
-static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
-static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config);
-
-static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
-static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
- uint32_t TIM_ICFilter);
-static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter);
-static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
- uint32_t TIM_ICFilter);
-static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
- uint32_t TIM_ICFilter);
-
-static void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
- uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter);
-
-static void TIM_ITRx_SetConfig(TIM_TypeDef* TIMx, uint16_t TIM_ITRx);
-static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma);
-static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma);
-static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
- TIM_SlaveConfigTypeDef * sSlaveConfig);
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup TIM_Exported_Functions TIM Exported Functions
- * @{
- */
-
-/** @defgroup TIM_Exported_Functions_Group1 Time Base functions
- * @brief Time Base functions
- *
-@verbatim
- ==============================================================================
- ##### Time Base functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the TIM base.
- (+) De-initialize the TIM base.
- (+) Start the Time Base.
- (+) Stop the Time Base.
- (+) Start the Time Base and enable interrupt.
- (+) Stop the Time Base and disable interrupt.
- (+) Start the Time Base and enable DMA transfer.
- (+) Stop the Time Base and disable DMA transfer.
-
-@endverbatim
- * @{
- */
-/**
- * @brief Initializes the TIM Time base Unit according to the specified
- * parameters in the TIM_HandleTypeDef and create the associated handle.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim)
-{
- /* Check the TIM handle allocation */
- if(htim == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
- assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
- assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
-
- if(htim->State == HAL_TIM_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- htim->Lock = HAL_UNLOCKED;
- /* Init the low level hardware : GPIO, CLOCK, NVIC */
- HAL_TIM_Base_MspInit(htim);
- }
-
- /* Set the TIM state */
- htim->State= HAL_TIM_STATE_BUSY;
-
- /* Set the Time Base configuration */
- TIM_Base_SetConfig(htim->Instance, &htim->Init);
-
- /* Initialize the TIM state*/
- htim->State= HAL_TIM_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the TIM Base peripheral
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Disable the TIM Peripheral Clock */
- __HAL_TIM_DISABLE(htim);
-
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
- HAL_TIM_Base_MspDeInit(htim);
-
- /* Change TIM state */
- htim->State = HAL_TIM_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the TIM Base MSP.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_Base_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes TIM Base MSP.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_Base_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @brief Starts the TIM Base generation.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
-
- /* Set the TIM state */
- htim->State= HAL_TIM_STATE_BUSY;
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Change the TIM state*/
- htim->State= HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Base generation.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
-
- /* Set the TIM state */
- htim->State= HAL_TIM_STATE_BUSY;
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Change the TIM state*/
- htim->State= HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Base generation in interrupt mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
-
- /* Enable the TIM Update interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_UPDATE);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Base generation in interrupt mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
- /* Disable the TIM Update interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_UPDATE);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Base generation in DMA mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param pData: The source Buffer address.
- * @param Length: The length of data to be transferred from memory to peripheral.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
-{
- /* Check the parameters */
- assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
-
- if((htim->State == HAL_TIM_STATE_BUSY))
- {
- return HAL_BUSY;
- }
- else if((htim->State == HAL_TIM_STATE_READY))
- {
- if((pData == 0 ) && (Length > 0))
- {
- return HAL_ERROR;
- }
- else
- {
- htim->State = HAL_TIM_STATE_BUSY;
- }
- }
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)pData, (uint32_t)&htim->Instance->ARR, Length);
-
- /* Enable the TIM Update DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_UPDATE);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Base generation in DMA mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_DMA_INSTANCE(htim->Instance));
-
- /* Disable the TIM Update DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_UPDATE);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Change the htim state */
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-/**
- * @}
- */
-
-/** @defgroup TIM_Exported_Functions_Group2 Time Output Compare functions
- * @brief Time Output Compare functions
- *
-@verbatim
- ==============================================================================
- ##### Time Output Compare functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the TIM Output Compare.
- (+) De-initialize the TIM Output Compare.
- (+) Start the Time Output Compare.
- (+) Stop the Time Output Compare.
- (+) Start the Time Output Compare and enable interrupt.
- (+) Stop the Time Output Compare and disable interrupt.
- (+) Start the Time Output Compare and enable DMA transfer.
- (+) Stop the Time Output Compare and disable DMA transfer.
-
-@endverbatim
- * @{
- */
-/**
- * @brief Initializes the TIM Output Compare according to the specified
- * parameters in the TIM_HandleTypeDef and create the associated handle.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef* htim)
-{
- /* Check the TIM handle allocation */
- if(htim == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
- assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
- assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
-
- if(htim->State == HAL_TIM_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- htim->Lock = HAL_UNLOCKED;
- /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
- HAL_TIM_OC_MspInit(htim);
- }
-
- /* Set the TIM state */
- htim->State= HAL_TIM_STATE_BUSY;
-
- /* Init the base time for the Output Compare */
- TIM_Base_SetConfig(htim->Instance, &htim->Init);
-
- /* Initialize the TIM state*/
- htim->State= HAL_TIM_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the TIM peripheral
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Disable the TIM Peripheral Clock */
- __HAL_TIM_DISABLE(htim);
-
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
- HAL_TIM_OC_MspDeInit(htim);
-
- /* Change TIM state */
- htim->State = HAL_TIM_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the TIM Output Compare MSP.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_OC_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes TIM Output Compare MSP.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_OC_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @brief Starts the TIM Output Compare signal generation.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channel to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- /* Enable the Output compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
-
- if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
- {
- /* Enable the main output */
- __HAL_TIM_MOE_ENABLE(htim);
- }
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Output Compare signal generation.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channel to be disabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- /* Disable the Output compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
-
- if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
- {
- /* Disable the Main Output */
- __HAL_TIM_MOE_DISABLE(htim);
- }
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Output Compare signal generation in interrupt mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channel to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Enable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Enable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Enable the TIM Capture/Compare 3 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Enable the TIM Capture/Compare 4 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Enable the Output compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
-
- if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
- {
- /* Enable the main output */
- __HAL_TIM_MOE_ENABLE(htim);
- }
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Output Compare signal generation in interrupt mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channel to be disabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Disable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Disable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Disable the TIM Capture/Compare 3 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Disable the TIM Capture/Compare 4 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Disable the Output compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
-
- if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
- {
- /* Disable the Main Output */
- __HAL_TIM_MOE_DISABLE(htim);
- }
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Output Compare signal generation in DMA mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channel to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @param pData: The source Buffer address.
- * @param Length: The length of data to be transferred from memory to TIM peripheral
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- if((htim->State == HAL_TIM_STATE_BUSY))
- {
- return HAL_BUSY;
- }
- else if((htim->State == HAL_TIM_STATE_READY))
- {
- if(((uint32_t)pData == 0 ) && (Length > 0))
- {
- return HAL_ERROR;
- }
- else
- {
- htim->State = HAL_TIM_STATE_BUSY;
- }
- }
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
-
- /* Enable the TIM Capture/Compare 1 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
-
- /* Enable the TIM Capture/Compare 2 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
-
- /* Enable the TIM Capture/Compare 3 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
-
- /* Enable the TIM Capture/Compare 4 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Enable the Output compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
-
- if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
- {
- /* Enable the main output */
- __HAL_TIM_MOE_ENABLE(htim);
- }
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Output Compare signal generation in DMA mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channel to be disabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Disable the TIM Capture/Compare 1 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Disable the TIM Capture/Compare 2 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Disable the TIM Capture/Compare 3 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Disable the TIM Capture/Compare 4 interrupt */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Disable the Output compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
-
- if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
- {
- /* Disable the Main Output */
- __HAL_TIM_MOE_DISABLE(htim);
- }
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Change the htim state */
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-/**
- * @}
- */
-
-/** @defgroup TIM_Exported_Functions_Group3 Time PWM functions
- * @brief Time PWM functions
- *
-@verbatim
- ==============================================================================
- ##### Time PWM functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the TIM OPWM.
- (+) De-initialize the TIM PWM.
- (+) Start the Time PWM.
- (+) Stop the Time PWM.
- (+) Start the Time PWM and enable interrupt.
- (+) Stop the Time PWM and disable interrupt.
- (+) Start the Time PWM and enable DMA transfer.
- (+) Stop the Time PWM and disable DMA transfer.
-
-@endverbatim
- * @{
- */
-/**
- * @brief Initializes the TIM PWM Time Base according to the specified
- * parameters in the TIM_HandleTypeDef and create the associated handle.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim)
-{
- /* Check the TIM handle allocation */
- if(htim == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
- assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
- assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
-
- if(htim->State == HAL_TIM_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- htim->Lock = HAL_UNLOCKED;
- /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
- HAL_TIM_PWM_MspInit(htim);
- }
-
- /* Set the TIM state */
- htim->State= HAL_TIM_STATE_BUSY;
-
- /* Init the base time for the PWM */
- TIM_Base_SetConfig(htim->Instance, &htim->Init);
-
- /* Initialize the TIM state*/
- htim->State= HAL_TIM_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the TIM peripheral
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Disable the TIM Peripheral Clock */
- __HAL_TIM_DISABLE(htim);
-
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
- HAL_TIM_PWM_MspDeInit(htim);
-
- /* Change TIM state */
- htim->State = HAL_TIM_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the TIM PWM MSP.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_PWM_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes TIM PWM MSP.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_PWM_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @brief Starts the PWM signal generation.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channels to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- /* Enable the Capture compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
-
- if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
- {
- /* Enable the main output */
- __HAL_TIM_MOE_ENABLE(htim);
- }
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the PWM signal generation.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channels to be disabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- /* Disable the Capture compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
-
- if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
- {
- /* Disable the Main Output */
- __HAL_TIM_MOE_DISABLE(htim);
- }
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Change the htim state */
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the PWM signal generation in interrupt mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channel to be disabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Enable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Enable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Enable the TIM Capture/Compare 3 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Enable the TIM Capture/Compare 4 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Enable the Capture compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
-
- if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
- {
- /* Enable the main output */
- __HAL_TIM_MOE_ENABLE(htim);
- }
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the PWM signal generation in interrupt mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channels to be disabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Disable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Disable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Disable the TIM Capture/Compare 3 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Disable the TIM Capture/Compare 4 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Disable the Capture compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
-
- if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
- {
- /* Disable the Main Output */
- __HAL_TIM_MOE_DISABLE(htim);
- }
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM PWM signal generation in DMA mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channels to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @param pData: The source Buffer address.
- * @param Length: The length of data to be transferred from memory to TIM peripheral
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- if((htim->State == HAL_TIM_STATE_BUSY))
- {
- return HAL_BUSY;
- }
- else if((htim->State == HAL_TIM_STATE_READY))
- {
- if(((uint32_t)pData == 0 ) && (Length > 0))
- {
- return HAL_ERROR;
- }
- else
- {
- htim->State = HAL_TIM_STATE_BUSY;
- }
- }
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
-
- /* Enable the TIM Capture/Compare 1 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
-
- /* Enable the TIM Capture/Compare 2 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
-
- /* Enable the TIM Output Capture/Compare 3 request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
-
- /* Enable the TIM Capture/Compare 4 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Enable the Capture compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
-
- if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
- {
- /* Enable the main output */
- __HAL_TIM_MOE_ENABLE(htim);
- }
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM PWM signal generation in DMA mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channels to be disabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Disable the TIM Capture/Compare 1 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Disable the TIM Capture/Compare 2 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Disable the TIM Capture/Compare 3 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Disable the TIM Capture/Compare 4 interrupt */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Disable the Capture compare channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
-
- if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
- {
- /* Disable the Main Output */
- __HAL_TIM_MOE_DISABLE(htim);
- }
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Change the htim state */
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-/**
- * @}
- */
-
-/** @defgroup TIM_Exported_Functions_Group4 Time Input Capture functions
- * @brief Time Input Capture functions
- *
-@verbatim
- ==============================================================================
- ##### Time Input Capture functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the TIM Input Capture.
- (+) De-initialize the TIM Input Capture.
- (+) Start the Time Input Capture.
- (+) Stop the Time Input Capture.
- (+) Start the Time Input Capture and enable interrupt.
- (+) Stop the Time Input Capture and disable interrupt.
- (+) Start the Time Input Capture and enable DMA transfer.
- (+) Stop the Time Input Capture and disable DMA transfer.
-
-@endverbatim
- * @{
- */
-/**
- * @brief Initializes the TIM Input Capture Time base according to the specified
- * parameters in the TIM_HandleTypeDef and create the associated handle.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim)
-{
- /* Check the TIM handle allocation */
- if(htim == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
- assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
- assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
-
- if(htim->State == HAL_TIM_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- htim->Lock = HAL_UNLOCKED;
- /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
- HAL_TIM_IC_MspInit(htim);
- }
-
- /* Set the TIM state */
- htim->State= HAL_TIM_STATE_BUSY;
-
- /* Init the base time for the input capture */
- TIM_Base_SetConfig(htim->Instance, &htim->Init);
-
- /* Initialize the TIM state*/
- htim->State= HAL_TIM_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the TIM peripheral
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Disable the TIM Peripheral Clock */
- __HAL_TIM_DISABLE(htim);
-
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC and DMA */
- HAL_TIM_IC_MspDeInit(htim);
-
- /* Change TIM state */
- htim->State = HAL_TIM_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the TIM INput Capture MSP.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_IC_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes TIM Input Capture MSP.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_IC_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @brief Starts the TIM Input Capture measurement.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channels to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_IC_Start (TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- /* Enable the Input Capture channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Input Capture measurement.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channels to be disabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- /* Disable the Input Capture channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Input Capture measurement in interrupt mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channels to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_IC_Start_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Enable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Enable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Enable the TIM Capture/Compare 3 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Enable the TIM Capture/Compare 4 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
- }
- break;
-
- default:
- break;
- }
- /* Enable the Input Capture channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Input Capture measurement in interrupt mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channels to be disabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Disable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Disable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Disable the TIM Capture/Compare 3 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Disable the TIM Capture/Compare 4 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Disable the Input Capture channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Input Capture measurement on in DMA mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channels to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @param pData: The destination Buffer address.
- * @param Length: The length of data to be transferred from TIM peripheral to memory.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
- assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
-
- if((htim->State == HAL_TIM_STATE_BUSY))
- {
- return HAL_BUSY;
- }
- else if((htim->State == HAL_TIM_STATE_READY))
- {
- if((pData == 0 ) && (Length > 0))
- {
- return HAL_ERROR;
- }
- else
- {
- htim->State = HAL_TIM_STATE_BUSY;
- }
- }
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
-
- /* Enable the TIM Capture/Compare 1 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData, Length);
-
- /* Enable the TIM Capture/Compare 2 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->CCR3, (uint32_t)pData, Length);
-
- /* Enable the TIM Capture/Compare 3 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->CCR4, (uint32_t)pData, Length);
-
- /* Enable the TIM Capture/Compare 4 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Enable the Input Capture channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_ENABLE);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Input Capture measurement on in DMA mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channels to be disabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCX_INSTANCE(htim->Instance, Channel));
- assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Disable the TIM Capture/Compare 1 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Disable the TIM Capture/Compare 2 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Disable the TIM Capture/Compare 3 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Disable the TIM Capture/Compare 4 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Disable the Input Capture channel */
- TIM_CCxChannelCmd(htim->Instance, Channel, TIM_CCx_DISABLE);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Change the htim state */
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-/**
- * @}
- */
-
-/** @defgroup TIM_Exported_Functions_Group5 Time One Pulse functions
- * @brief Time One Pulse functions
- *
-@verbatim
- ==============================================================================
- ##### Time One Pulse functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the TIM One Pulse.
- (+) De-initialize the TIM One Pulse.
- (+) Start the Time One Pulse.
- (+) Stop the Time One Pulse.
- (+) Start the Time One Pulse and enable interrupt.
- (+) Stop the Time One Pulse and disable interrupt.
- (+) Start the Time One Pulse and enable DMA transfer.
- (+) Stop the Time One Pulse and disable DMA transfer.
-
-@endverbatim
- * @{
- */
-/**
- * @brief Initializes the TIM One Pulse Time Base according to the specified
- * parameters in the TIM_HandleTypeDef and create the associated handle.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param OnePulseMode: Select the One pulse mode.
- * This parameter can be one of the following values:
- * @arg TIM_OPMODE_SINGLE: Only one pulse will be generated.
- * @arg TIM_OPMODE_REPETITIVE: Repetitive pulses will be generated.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode)
-{
- /* Check the TIM handle allocation */
- if(htim == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
- assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
- assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
- assert_param(IS_TIM_OPM_MODE(OnePulseMode));
-
- if(htim->State == HAL_TIM_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- htim->Lock = HAL_UNLOCKED;
- /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
- HAL_TIM_OnePulse_MspInit(htim);
- }
-
- /* Set the TIM state */
- htim->State= HAL_TIM_STATE_BUSY;
-
- /* Configure the Time base in the One Pulse Mode */
- TIM_Base_SetConfig(htim->Instance, &htim->Init);
-
- /* Reset the OPM Bit */
- htim->Instance->CR1 &= ~TIM_CR1_OPM;
-
- /* Configure the OPM Mode */
- htim->Instance->CR1 |= OnePulseMode;
-
- /* Initialize the TIM state*/
- htim->State= HAL_TIM_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the TIM One Pulse
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Disable the TIM Peripheral Clock */
- __HAL_TIM_DISABLE(htim);
-
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
- HAL_TIM_OnePulse_MspDeInit(htim);
-
- /* Change TIM state */
- htim->State = HAL_TIM_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the TIM One Pulse MSP.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_OnePulse_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes TIM One Pulse MSP.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_OnePulse_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @brief Starts the TIM One Pulse signal generation.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param OutputChannel : TIM Channels to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
-{
- /* Enable the Capture compare and the Input Capture channels
- (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
- if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
- if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
- in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
-
- No need to enable the counter, it's enabled automatically by hardware
- (the counter starts in response to a stimulus and generate a pulse */
-
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
-
- if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
- {
- /* Enable the main output */
- __HAL_TIM_MOE_ENABLE(htim);
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM One Pulse signal generation.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param OutputChannel : TIM Channels to be disable.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
-{
- /* Disable the Capture compare and the Input Capture channels
- (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
- if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
- if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
- in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
-
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
-
- if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
- {
- /* Disable the Main Output */
- __HAL_TIM_MOE_DISABLE(htim);
- }
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM One Pulse signal generation in interrupt mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param OutputChannel : TIM Channels to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
-{
- /* Enable the Capture compare and the Input Capture channels
- (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
- if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
- if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
- in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be enabled together
-
- No need to enable the counter, it's enabled automatically by hardware
- (the counter starts in response to a stimulus and generate a pulse */
-
- /* Enable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
-
- /* Enable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
-
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
-
- if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
- {
- /* Enable the main output */
- __HAL_TIM_MOE_ENABLE(htim);
- }
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM One Pulse signal generation in interrupt mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param OutputChannel : TIM Channels to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
-{
- /* Disable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
-
- /* Disable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
-
- /* Disable the Capture compare and the Input Capture channels
- (in the OPM Mode the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2)
- if TIM_CHANNEL_1 is used as output, the TIM_CHANNEL_2 will be used as input and
- if TIM_CHANNEL_1 is used as input, the TIM_CHANNEL_2 will be used as output
- in all combinations, the TIM_CHANNEL_1 and TIM_CHANNEL_2 should be disabled together */
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
-
- if(IS_TIM_ADVANCED_INSTANCE(htim->Instance) != RESET)
- {
- /* Disable the Main Output */
- __HAL_TIM_MOE_DISABLE(htim);
- }
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-/**
- * @}
- */
-
-/** @defgroup TIM_Exported_Functions_Group6 Time Encoder functions
- * @brief Time Encoder functions
- *
-@verbatim
- ==============================================================================
- ##### Time Encoder functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the TIM Encoder.
- (+) De-initialize the TIM Encoder.
- (+) Start the Time Encoder.
- (+) Stop the Time Encoder.
- (+) Start the Time Encoder and enable interrupt.
- (+) Stop the Time Encoder and disable interrupt.
- (+) Start the Time Encoder and enable DMA transfer.
- (+) Stop the Time Encoder and disable DMA transfer.
-
-@endverbatim
- * @{
- */
-/**
- * @brief Initializes the TIM Encoder Interface and create the associated handle.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param sConfig: TIM Encoder Interface configuration structure
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig)
-{
- uint32_t tmpsmcr = 0;
- uint32_t tmpccmr1 = 0;
- uint32_t tmpccer = 0;
-
- /* Check the TIM handle allocation */
- if(htim == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- assert_param(IS_TIM_ENCODER_MODE(sConfig->EncoderMode));
- assert_param(IS_TIM_IC_SELECTION(sConfig->IC1Selection));
- assert_param(IS_TIM_IC_SELECTION(sConfig->IC2Selection));
- assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
- assert_param(IS_TIM_IC_POLARITY(sConfig->IC2Polarity));
- assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
- assert_param(IS_TIM_IC_PRESCALER(sConfig->IC2Prescaler));
- assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
- assert_param(IS_TIM_IC_FILTER(sConfig->IC2Filter));
-
- if(htim->State == HAL_TIM_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- htim->Lock = HAL_UNLOCKED;
- /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
- HAL_TIM_Encoder_MspInit(htim);
- }
-
- /* Set the TIM state */
- htim->State= HAL_TIM_STATE_BUSY;
-
- /* Reset the SMS bits */
- htim->Instance->SMCR &= ~TIM_SMCR_SMS;
-
- /* Configure the Time base in the Encoder Mode */
- TIM_Base_SetConfig(htim->Instance, &htim->Init);
-
- /* Get the TIMx SMCR register value */
- tmpsmcr = htim->Instance->SMCR;
-
- /* Get the TIMx CCMR1 register value */
- tmpccmr1 = htim->Instance->CCMR1;
-
- /* Get the TIMx CCER register value */
- tmpccer = htim->Instance->CCER;
-
- /* Set the encoder Mode */
- tmpsmcr |= sConfig->EncoderMode;
-
- /* Select the Capture Compare 1 and the Capture Compare 2 as input */
- tmpccmr1 &= ~(TIM_CCMR1_CC1S | TIM_CCMR1_CC2S);
- tmpccmr1 |= (sConfig->IC1Selection | (sConfig->IC2Selection << 8));
-
- /* Set the Capture Compare 1 and the Capture Compare 2 prescalers and filters */
- tmpccmr1 &= ~(TIM_CCMR1_IC1PSC | TIM_CCMR1_IC2PSC);
- tmpccmr1 &= ~(TIM_CCMR1_IC1F | TIM_CCMR1_IC2F);
- tmpccmr1 |= sConfig->IC1Prescaler | (sConfig->IC2Prescaler << 8);
- tmpccmr1 |= (sConfig->IC1Filter << 4) | (sConfig->IC2Filter << 12);
-
- /* Set the TI1 and the TI2 Polarities */
- tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC2P);
- tmpccer &= ~(TIM_CCER_CC1NP | TIM_CCER_CC2NP);
- tmpccer |= sConfig->IC1Polarity | (sConfig->IC2Polarity << 4);
-
- /* Write to TIMx SMCR */
- htim->Instance->SMCR = tmpsmcr;
-
- /* Write to TIMx CCMR1 */
- htim->Instance->CCMR1 = tmpccmr1;
-
- /* Write to TIMx CCER */
- htim->Instance->CCER = tmpccer;
-
- /* Initialize the TIM state*/
- htim->State= HAL_TIM_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the TIM Encoder interface
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Disable the TIM Peripheral Clock */
- __HAL_TIM_DISABLE(htim);
-
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
- HAL_TIM_Encoder_MspDeInit(htim);
-
- /* Change TIM state */
- htim->State = HAL_TIM_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the TIM Encoder Interface MSP.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_Encoder_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes TIM Encoder Interface MSP.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_Encoder_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @brief Starts the TIM Encoder Interface.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channels to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
-
- /* Enable the encoder interface channels */
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
- break;
- }
- case TIM_CHANNEL_2:
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
- break;
- }
- default :
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
- break;
- }
- }
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Encoder Interface.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channels to be disabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
-
- /* Disable the Input Capture channels 1 and 2
- (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
- break;
- }
- case TIM_CHANNEL_2:
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
- break;
- }
- default :
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
- break;
- }
- }
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Encoder Interface in interrupt mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channels to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
-
- /* Enable the encoder interface channels */
- /* Enable the capture compare Interrupts 1 and/or 2 */
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
- break;
- }
- case TIM_CHANNEL_2:
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
- break;
- }
- default :
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
- break;
- }
- }
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Encoder Interface in interrupt mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channels to be disabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
-
- /* Disable the Input Capture channels 1 and 2
- (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
- if(Channel == TIM_CHANNEL_1)
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
-
- /* Disable the capture compare Interrupts 1 */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
- }
- else if(Channel == TIM_CHANNEL_2)
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
-
- /* Disable the capture compare Interrupts 2 */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
- }
- else
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
-
- /* Disable the capture compare Interrupts 1 and 2 */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
- }
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Change the htim state */
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Encoder Interface in DMA mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channels to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
- * @param pData1: The destination Buffer address for IC1.
- * @param pData2: The destination Buffer address for IC2.
- * @param Length: The length of data to be transferred from TIM peripheral to memory.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length)
-{
- /* Check the parameters */
- assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
-
- if((htim->State == HAL_TIM_STATE_BUSY))
- {
- return HAL_BUSY;
- }
- else if((htim->State == HAL_TIM_STATE_READY))
- {
- if((((pData1 == 0) || (pData2 == 0) )) && (Length > 0))
- {
- return HAL_ERROR;
- }
- else
- {
- htim->State = HAL_TIM_STATE_BUSY;
- }
- }
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t )pData1, Length);
-
- /* Enable the TIM Input Capture DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Enable the Capture compare channel */
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError;
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
-
- /* Enable the TIM Input Capture DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Enable the Capture compare channel */
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
- }
- break;
-
- case TIM_CHANNEL_ALL:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData1, Length);
-
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->CCR2, (uint32_t)pData2, Length);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Enable the Capture compare channel */
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_ENABLE);
-
- /* Enable the TIM Input Capture DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
- /* Enable the TIM Input Capture DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- default:
- break;
- }
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Encoder Interface in DMA mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channels to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_ALL: TIM Channel 1 and TIM Channel 2 are selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_DMA_CC_INSTANCE(htim->Instance));
-
- /* Disable the Input Capture channels 1 and 2
- (in the EncoderInterface the two possible channels that can be used are TIM_CHANNEL_1 and TIM_CHANNEL_2) */
- if(Channel == TIM_CHANNEL_1)
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
-
- /* Disable the capture compare DMA Request 1 */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
- }
- else if(Channel == TIM_CHANNEL_2)
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
-
- /* Disable the capture compare DMA Request 2 */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
- }
- else
- {
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_2, TIM_CCx_DISABLE);
-
- /* Disable the capture compare DMA Request 1 and 2 */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
- }
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Change the htim state */
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-/**
- * @}
- */
-
-/** @defgroup TIM_Exported_Functions_Group7 TIM IRQ handler management
- * @brief IRQ handler management
- *
-@verbatim
- ==============================================================================
- ##### IRQ handler management #####
- ==============================================================================
- [..]
- This section provides Timer IRQ handler function.
-
-@endverbatim
- * @{
- */
-/**
- * @brief This function handles TIM interrupts requests.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim)
-{
- /* Capture compare 1 event */
- if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC1) != RESET)
- {
- if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC1) !=RESET)
- {
- {
- __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC1);
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
-
- /* Input capture event */
- if((htim->Instance->CCMR1 & TIM_CCMR1_CC1S) != 0x00)
- {
- HAL_TIM_IC_CaptureCallback(htim);
- }
- /* Output compare event */
- else
- {
- HAL_TIM_OC_DelayElapsedCallback(htim);
- HAL_TIM_PWM_PulseFinishedCallback(htim);
- }
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
- }
- }
- }
- /* Capture compare 2 event */
- if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC2) != RESET)
- {
- if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC2) !=RESET)
- {
- __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC2);
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
- /* Input capture event */
- if((htim->Instance->CCMR1 & TIM_CCMR1_CC2S) != 0x00)
- {
- HAL_TIM_IC_CaptureCallback(htim);
- }
- /* Output compare event */
- else
- {
- HAL_TIM_OC_DelayElapsedCallback(htim);
- HAL_TIM_PWM_PulseFinishedCallback(htim);
- }
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
- }
- }
- /* Capture compare 3 event */
- if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC3) != RESET)
- {
- if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC3) !=RESET)
- {
- __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC3);
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
- /* Input capture event */
- if((htim->Instance->CCMR2 & TIM_CCMR2_CC3S) != 0x00)
- {
- HAL_TIM_IC_CaptureCallback(htim);
- }
- /* Output compare event */
- else
- {
- HAL_TIM_OC_DelayElapsedCallback(htim);
- HAL_TIM_PWM_PulseFinishedCallback(htim);
- }
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
- }
- }
- /* Capture compare 4 event */
- if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_CC4) != RESET)
- {
- if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_CC4) !=RESET)
- {
- __HAL_TIM_CLEAR_IT(htim, TIM_IT_CC4);
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
- /* Input capture event */
- if((htim->Instance->CCMR2 & TIM_CCMR2_CC4S) != 0x00)
- {
- HAL_TIM_IC_CaptureCallback(htim);
- }
- /* Output compare event */
- else
- {
- HAL_TIM_OC_DelayElapsedCallback(htim);
- HAL_TIM_PWM_PulseFinishedCallback(htim);
- }
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
- }
- }
- /* TIM Update event */
- if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_UPDATE) != RESET)
- {
- if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_UPDATE) !=RESET)
- {
- __HAL_TIM_CLEAR_IT(htim, TIM_IT_UPDATE);
- HAL_TIM_PeriodElapsedCallback(htim);
- }
- }
- /* TIM Break input event */
- if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_BREAK) != RESET)
- {
- if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_BREAK) !=RESET)
- {
- __HAL_TIM_CLEAR_IT(htim, TIM_IT_BREAK);
- HAL_TIMEx_BreakCallback(htim);
- }
- }
- /* TIM Trigger detection event */
- if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_TRIGGER) != RESET)
- {
- if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_TRIGGER) !=RESET)
- {
- __HAL_TIM_CLEAR_IT(htim, TIM_IT_TRIGGER);
- HAL_TIM_TriggerCallback(htim);
- }
- }
- /* TIM commutation event */
- if(__HAL_TIM_GET_FLAG(htim, TIM_FLAG_COM) != RESET)
- {
- if(__HAL_TIM_GET_IT_SOURCE(htim, TIM_IT_COM) !=RESET)
- {
- __HAL_TIM_CLEAR_IT(htim, TIM_FLAG_COM);
- HAL_TIMEx_CommutationCallback(htim);
- }
- }
-}
-/**
- * @}
- */
-
-/** @defgroup TIM_Exported_Functions_Group8 Peripheral Control functions
- * @brief Peripheral Control functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral Control functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
- (+) Configure External Clock source.
- (+) Configure Complementary channels, break features and dead time.
- (+) Configure Master and the Slave synchronization.
- (+) Configure the DMA Burst Mode.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the TIM Output Compare Channels according to the specified
- * parameters in the TIM_OC_InitTypeDef.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param sConfig: TIM Output Compare configuration structure
- * @param Channel: TIM Channels to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CHANNELS(Channel));
- assert_param(IS_TIM_OC_MODE(sConfig->OCMode));
- assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
- assert_param(IS_TIM_OCN_POLARITY(sConfig->OCNPolarity));
- assert_param(IS_TIM_OCNIDLE_STATE(sConfig->OCNIdleState));
- assert_param(IS_TIM_OCIDLE_STATE(sConfig->OCIdleState));
-
- /* Check input state */
- __HAL_LOCK(htim);
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
- /* Configure the TIM Channel 1 in Output Compare */
- TIM_OC1_SetConfig(htim->Instance, sConfig);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- /* Configure the TIM Channel 2 in Output Compare */
- TIM_OC2_SetConfig(htim->Instance, sConfig);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
- /* Configure the TIM Channel 3 in Output Compare */
- TIM_OC3_SetConfig(htim->Instance, sConfig);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
- /* Configure the TIM Channel 4 in Output Compare */
- TIM_OC4_SetConfig(htim->Instance, sConfig);
- }
- break;
-
- default:
- break;
- }
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the TIM Input Capture Channels according to the specified
- * parameters in the TIM_IC_InitTypeDef.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param sConfig: TIM Input Capture configuration structure
- * @param Channel: TIM Channels to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
- assert_param(IS_TIM_IC_POLARITY(sConfig->ICPolarity));
- assert_param(IS_TIM_IC_SELECTION(sConfig->ICSelection));
- assert_param(IS_TIM_IC_PRESCALER(sConfig->ICPrescaler));
- assert_param(IS_TIM_IC_FILTER(sConfig->ICFilter));
-
- __HAL_LOCK(htim);
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- if (Channel == TIM_CHANNEL_1)
- {
- /* TI1 Configuration */
- TIM_TI1_SetConfig(htim->Instance,
- sConfig->ICPolarity,
- sConfig->ICSelection,
- sConfig->ICFilter);
-
- /* Reset the IC1PSC Bits */
- htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
-
- /* Set the IC1PSC value */
- htim->Instance->CCMR1 |= sConfig->ICPrescaler;
- }
- else if (Channel == TIM_CHANNEL_2)
- {
- /* TI2 Configuration */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
-
- TIM_TI2_SetConfig(htim->Instance,
- sConfig->ICPolarity,
- sConfig->ICSelection,
- sConfig->ICFilter);
-
- /* Reset the IC2PSC Bits */
- htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
-
- /* Set the IC2PSC value */
- htim->Instance->CCMR1 |= (sConfig->ICPrescaler << 8);
- }
- else if (Channel == TIM_CHANNEL_3)
- {
- /* TI3 Configuration */
- assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
-
- TIM_TI3_SetConfig(htim->Instance,
- sConfig->ICPolarity,
- sConfig->ICSelection,
- sConfig->ICFilter);
-
- /* Reset the IC3PSC Bits */
- htim->Instance->CCMR2 &= ~TIM_CCMR2_IC3PSC;
-
- /* Set the IC3PSC value */
- htim->Instance->CCMR2 |= sConfig->ICPrescaler;
- }
- else
- {
- /* TI4 Configuration */
- assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
-
- TIM_TI4_SetConfig(htim->Instance,
- sConfig->ICPolarity,
- sConfig->ICSelection,
- sConfig->ICFilter);
-
- /* Reset the IC4PSC Bits */
- htim->Instance->CCMR2 &= ~TIM_CCMR2_IC4PSC;
-
- /* Set the IC4PSC value */
- htim->Instance->CCMR2 |= (sConfig->ICPrescaler << 8);
- }
-
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the TIM PWM channels according to the specified
- * parameters in the TIM_OC_InitTypeDef.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param sConfig: TIM PWM configuration structure
- * @param Channel: TIM Channels to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel)
-{
- __HAL_LOCK(htim);
-
- /* Check the parameters */
- assert_param(IS_TIM_CHANNELS(Channel));
- assert_param(IS_TIM_PWM_MODE(sConfig->OCMode));
- assert_param(IS_TIM_OC_POLARITY(sConfig->OCPolarity));
- assert_param(IS_TIM_OCN_POLARITY(sConfig->OCNPolarity));
- assert_param(IS_TIM_OCNIDLE_STATE(sConfig->OCNIdleState));
- assert_param(IS_TIM_OCIDLE_STATE(sConfig->OCIdleState));
- assert_param(IS_TIM_FAST_STATE(sConfig->OCFastMode));
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
- /* Configure the Channel 1 in PWM mode */
- TIM_OC1_SetConfig(htim->Instance, sConfig);
-
- /* Set the Preload enable bit for channel1 */
- htim->Instance->CCMR1 |= TIM_CCMR1_OC1PE;
-
- /* Configure the Output Fast mode */
- htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1FE;
- htim->Instance->CCMR1 |= sConfig->OCFastMode;
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- /* Configure the Channel 2 in PWM mode */
- TIM_OC2_SetConfig(htim->Instance, sConfig);
-
- /* Set the Preload enable bit for channel2 */
- htim->Instance->CCMR1 |= TIM_CCMR1_OC2PE;
-
- /* Configure the Output Fast mode */
- htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2FE;
- htim->Instance->CCMR1 |= sConfig->OCFastMode << 8;
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
- /* Configure the Channel 3 in PWM mode */
- TIM_OC3_SetConfig(htim->Instance, sConfig);
-
- /* Set the Preload enable bit for channel3 */
- htim->Instance->CCMR2 |= TIM_CCMR2_OC3PE;
-
- /* Configure the Output Fast mode */
- htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3FE;
- htim->Instance->CCMR2 |= sConfig->OCFastMode;
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
- /* Configure the Channel 4 in PWM mode */
- TIM_OC4_SetConfig(htim->Instance, sConfig);
-
- /* Set the Preload enable bit for channel4 */
- htim->Instance->CCMR2 |= TIM_CCMR2_OC4PE;
-
- /* Configure the Output Fast mode */
- htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4FE;
- htim->Instance->CCMR2 |= sConfig->OCFastMode << 8;
- }
- break;
-
- default:
- break;
- }
-
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the TIM One Pulse Channels according to the specified
- * parameters in the TIM_OnePulse_InitTypeDef.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param sConfig: TIM One Pulse configuration structure
- * @param OutputChannel: TIM Channels to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @param InputChannel: TIM Channels to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel)
-{
- TIM_OC_InitTypeDef temp1;
-
- /* Check the parameters */
- assert_param(IS_TIM_OPM_CHANNELS(OutputChannel));
- assert_param(IS_TIM_OPM_CHANNELS(InputChannel));
-
- if(OutputChannel != InputChannel)
- {
- __HAL_LOCK(htim);
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Extract the Output compare configuration from sConfig structure */
- temp1.OCMode = sConfig->OCMode;
- temp1.Pulse = sConfig->Pulse;
- temp1.OCPolarity = sConfig->OCPolarity;
- temp1.OCNPolarity = sConfig->OCNPolarity;
- temp1.OCIdleState = sConfig->OCIdleState;
- temp1.OCNIdleState = sConfig->OCNIdleState;
-
- switch (OutputChannel)
- {
- case TIM_CHANNEL_1:
- {
- assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
-
- TIM_OC1_SetConfig(htim->Instance, &temp1);
- }
- break;
- case TIM_CHANNEL_2:
- {
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
-
- TIM_OC2_SetConfig(htim->Instance, &temp1);
- }
- break;
- default:
- break;
- }
- switch (InputChannel)
- {
- case TIM_CHANNEL_1:
- {
- assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
-
- TIM_TI1_SetConfig(htim->Instance, sConfig->ICPolarity,
- sConfig->ICSelection, sConfig->ICFilter);
-
- /* Reset the IC1PSC Bits */
- htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
-
- /* Select the Trigger source */
- htim->Instance->SMCR &= ~TIM_SMCR_TS;
- htim->Instance->SMCR |= TIM_TS_TI1FP1;
-
- /* Select the Slave Mode */
- htim->Instance->SMCR &= ~TIM_SMCR_SMS;
- htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
- }
- break;
- case TIM_CHANNEL_2:
- {
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
-
- TIM_TI2_SetConfig(htim->Instance, sConfig->ICPolarity,
- sConfig->ICSelection, sConfig->ICFilter);
-
- /* Reset the IC2PSC Bits */
- htim->Instance->CCMR1 &= ~TIM_CCMR1_IC2PSC;
-
- /* Select the Trigger source */
- htim->Instance->SMCR &= ~TIM_SMCR_TS;
- htim->Instance->SMCR |= TIM_TS_TI2FP2;
-
- /* Select the Slave Mode */
- htim->Instance->SMCR &= ~TIM_SMCR_SMS;
- htim->Instance->SMCR |= TIM_SLAVEMODE_TRIGGER;
- }
- break;
-
- default:
- break;
- }
-
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
- }
- else
- {
- return HAL_ERROR;
- }
-}
-
-/**
- * @brief Configure the DMA Burst to transfer Data from the memory to the TIM peripheral
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param BurstBaseAddress: TIM Base address from when the DMA will starts the Data write.
- * This parameters can be on of the following values:
- * @arg TIM_DMABASE_CR1
- * @arg TIM_DMABASE_CR2
- * @arg TIM_DMABASE_SMCR
- * @arg TIM_DMABASE_DIER
- * @arg TIM_DMABASE_SR
- * @arg TIM_DMABASE_EGR
- * @arg TIM_DMABASE_CCMR1
- * @arg TIM_DMABASE_CCMR2
- * @arg TIM_DMABASE_CCER
- * @arg TIM_DMABASE_CNT
- * @arg TIM_DMABASE_PSC
- * @arg TIM_DMABASE_ARR
- * @arg TIM_DMABASE_RCR
- * @arg TIM_DMABASE_CCR1
- * @arg TIM_DMABASE_CCR2
- * @arg TIM_DMABASE_CCR3
- * @arg TIM_DMABASE_CCR4
- * @arg TIM_DMABASE_BDTR
- * @arg TIM_DMABASE_DCR
- * @param BurstRequestSrc: TIM DMA Request sources.
- * This parameters can be on of the following values:
- * @arg TIM_DMA_UPDATE: TIM update Interrupt source
- * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
- * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
- * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
- * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
- * @arg TIM_DMA_COM: TIM Commutation DMA source
- * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
- * @param BurstBuffer: The Buffer address.
- * @param BurstLength: DMA Burst length. This parameter can be one value
- * between TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
- uint32_t* BurstBuffer, uint32_t BurstLength)
-{
- /* Check the parameters */
- assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
- assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
- assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
- assert_param(IS_TIM_DMA_LENGTH(BurstLength));
-
- if((htim->State == HAL_TIM_STATE_BUSY))
- {
- return HAL_BUSY;
- }
- else if((htim->State == HAL_TIM_STATE_READY))
- {
- if((BurstBuffer == 0 ) && (BurstLength > 0))
- {
- return HAL_ERROR;
- }
- else
- {
- htim->State = HAL_TIM_STATE_BUSY;
- }
- }
- switch(BurstRequestSrc)
- {
- case TIM_DMA_UPDATE:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_CC1:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_CC2:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_CC3:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_CC4:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_COM:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_TRIGGER:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)BurstBuffer, (uint32_t)&htim->Instance->DMAR, ((BurstLength) >> 8) + 1);
- }
- break;
- default:
- break;
- }
- /* configure the DMA Burst Mode */
- htim->Instance->DCR = BurstBaseAddress | BurstLength;
-
- /* Enable the TIM DMA Request */
- __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
-
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM DMA Burst mode
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param BurstRequestSrc: TIM DMA Request sources to disable
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
-{
- /* Check the parameters */
- assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
-
- /* Abort the DMA transfer (at least disable the DMA channel) */
- switch(BurstRequestSrc)
- {
- case TIM_DMA_UPDATE:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
- }
- break;
- case TIM_DMA_CC1:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
- }
- break;
- case TIM_DMA_CC2:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
- }
- break;
- case TIM_DMA_CC3:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
- }
- break;
- case TIM_DMA_CC4:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
- }
- break;
- case TIM_DMA_COM:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
- }
- break;
- case TIM_DMA_TRIGGER:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
- }
- break;
- default:
- break;
- }
-
- /* Disable the TIM Update DMA request */
- __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Configure the DMA Burst to transfer Data from the TIM peripheral to the memory
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param BurstBaseAddress: TIM Base address from when the DMA will starts the Data read.
- * This parameters can be on of the following values:
- * @arg TIM_DMABASE_CR1
- * @arg TIM_DMABASE_CR2
- * @arg TIM_DMABASE_SMCR
- * @arg TIM_DMABASE_DIER
- * @arg TIM_DMABASE_SR
- * @arg TIM_DMABASE_EGR
- * @arg TIM_DMABASE_CCMR1
- * @arg TIM_DMABASE_CCMR2
- * @arg TIM_DMABASE_CCER
- * @arg TIM_DMABASE_CNT
- * @arg TIM_DMABASE_PSC
- * @arg TIM_DMABASE_ARR
- * @arg TIM_DMABASE_RCR
- * @arg TIM_DMABASE_CCR1
- * @arg TIM_DMABASE_CCR2
- * @arg TIM_DMABASE_CCR3
- * @arg TIM_DMABASE_CCR4
- * @arg TIM_DMABASE_BDTR
- * @arg TIM_DMABASE_DCR
- * @param BurstRequestSrc: TIM DMA Request sources.
- * This parameters can be on of the following values:
- * @arg TIM_DMA_UPDATE: TIM update Interrupt source
- * @arg TIM_DMA_CC1: TIM Capture Compare 1 DMA source
- * @arg TIM_DMA_CC2: TIM Capture Compare 2 DMA source
- * @arg TIM_DMA_CC3: TIM Capture Compare 3 DMA source
- * @arg TIM_DMA_CC4: TIM Capture Compare 4 DMA source
- * @arg TIM_DMA_COM: TIM Commutation DMA source
- * @arg TIM_DMA_TRIGGER: TIM Trigger DMA source
- * @param BurstBuffer: The Buffer address.
- * @param BurstLength: DMA Burst length. This parameter can be one value
- * between TIM_DMABURSTLENGTH_1TRANSFER and TIM_DMABURSTLENGTH_18TRANSFERS.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc,
- uint32_t *BurstBuffer, uint32_t BurstLength)
-{
- /* Check the parameters */
- assert_param(IS_TIM_DMABURST_INSTANCE(htim->Instance));
- assert_param(IS_TIM_DMA_BASE(BurstBaseAddress));
- assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
- assert_param(IS_TIM_DMA_LENGTH(BurstLength));
-
- if((htim->State == HAL_TIM_STATE_BUSY))
- {
- return HAL_BUSY;
- }
- else if((htim->State == HAL_TIM_STATE_READY))
- {
- if((BurstBuffer == 0 ) && (BurstLength > 0))
- {
- return HAL_ERROR;
- }
- else
- {
- htim->State = HAL_TIM_STATE_BUSY;
- }
- }
- switch(BurstRequestSrc)
- {
- case TIM_DMA_UPDATE:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_UPDATE]->XferCpltCallback = TIM_DMAPeriodElapsedCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_UPDATE]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_UPDATE], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_CC1:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_CC2:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_CC3:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_CC4:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMACaptureCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_COM:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_COMMUTATION], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
- }
- break;
- case TIM_DMA_TRIGGER:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_TRIGGER]->XferCpltCallback = TIM_DMATriggerCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_TRIGGER]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_TRIGGER], (uint32_t)&htim->Instance->DMAR, (uint32_t)BurstBuffer, ((BurstLength) >> 8) + 1);
- }
- break;
- default:
- break;
- }
-
- /* configure the DMA Burst Mode */
- htim->Instance->DCR = BurstBaseAddress | BurstLength;
-
- /* Enable the TIM DMA Request */
- __HAL_TIM_ENABLE_DMA(htim, BurstRequestSrc);
-
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stop the DMA burst reading
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param BurstRequestSrc: TIM DMA Request sources to disable.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc)
-{
- /* Check the parameters */
- assert_param(IS_TIM_DMA_SOURCE(BurstRequestSrc));
-
- /* Abort the DMA transfer (at least disable the DMA channel) */
- switch(BurstRequestSrc)
- {
- case TIM_DMA_UPDATE:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_UPDATE]);
- }
- break;
- case TIM_DMA_CC1:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC1]);
- }
- break;
- case TIM_DMA_CC2:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC2]);
- }
- break;
- case TIM_DMA_CC3:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC3]);
- }
- break;
- case TIM_DMA_CC4:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_CC4]);
- }
- break;
- case TIM_DMA_COM:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_COMMUTATION]);
- }
- break;
- case TIM_DMA_TRIGGER:
- {
- HAL_DMA_Abort(htim->hdma[TIM_DMA_ID_TRIGGER]);
- }
- break;
- default:
- break;
- }
-
- /* Disable the TIM Update DMA request */
- __HAL_TIM_DISABLE_DMA(htim, BurstRequestSrc);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Generate a software event
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param EventSource: specifies the event source.
- * This parameter can be one of the following values:
- * @arg TIM_EVENTSOURCE_UPDATE: Timer update Event source
- * @arg TIM_EVENTSOURCE_CC1: Timer Capture Compare 1 Event source
- * @arg TIM_EVENTSOURCE_CC2: Timer Capture Compare 2 Event source
- * @arg TIM_EVENTSOURCE_CC3: Timer Capture Compare 3 Event source
- * @arg TIM_EVENTSOURCE_CC4: Timer Capture Compare 4 Event source
- * @arg TIM_EVENTSOURCE_COM: Timer COM event source
- * @arg TIM_EVENTSOURCE_TRIGGER: Timer Trigger Event source
- * @arg TIM_EVENTSOURCE_BREAK: Timer Break event source
- * @note TIM6 and TIM7 can only generate an update event.
- * @note TIM_EVENTSOURCE_COM and TIM_EVENTSOURCE_BREAK are used only with TIM1 and TIM8.
- * @retval HAL status
- */
-
-HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
- assert_param(IS_TIM_EVENT_SOURCE(EventSource));
-
- /* Process Locked */
- __HAL_LOCK(htim);
-
- /* Change the TIM state */
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Set the event sources */
- htim->Instance->EGR = EventSource;
-
- /* Change the TIM state */
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Configures the OCRef clear feature
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param sClearInputConfig: pointer to a TIM_ClearInputConfigTypeDef structure that
- * contains the OCREF clear feature and parameters for the TIM peripheral.
- * @param Channel: specifies the TIM Channel.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
- assert_param(IS_TIM_CHANNELS(Channel));
- assert_param(IS_TIM_CLEARINPUT_SOURCE(sClearInputConfig->ClearInputSource));
- assert_param(IS_TIM_CLEARINPUT_POLARITY(sClearInputConfig->ClearInputPolarity));
- assert_param(IS_TIM_CLEARINPUT_PRESCALER(sClearInputConfig->ClearInputPrescaler));
- assert_param(IS_TIM_CLEARINPUT_FILTER(sClearInputConfig->ClearInputFilter));
-
- /* Process Locked */
- __HAL_LOCK(htim);
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- if(sClearInputConfig->ClearInputSource == TIM_CLEARINPUTSOURCE_ETR)
- {
- TIM_ETR_SetConfig(htim->Instance,
- sClearInputConfig->ClearInputPrescaler,
- sClearInputConfig->ClearInputPolarity,
- sClearInputConfig->ClearInputFilter);
- }
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- if(sClearInputConfig->ClearInputState != RESET)
- {
- /* Enable the Ocref clear feature for Channel 1 */
- htim->Instance->CCMR1 |= TIM_CCMR1_OC1CE;
- }
- else
- {
- /* Disable the Ocref clear feature for Channel 1 */
- htim->Instance->CCMR1 &= ~TIM_CCMR1_OC1CE;
- }
- }
- break;
- case TIM_CHANNEL_2:
- {
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- if(sClearInputConfig->ClearInputState != RESET)
- {
- /* Enable the Ocref clear feature for Channel 2 */
- htim->Instance->CCMR1 |= TIM_CCMR1_OC2CE;
- }
- else
- {
- /* Disable the Ocref clear feature for Channel 2 */
- htim->Instance->CCMR1 &= ~TIM_CCMR1_OC2CE;
- }
- }
- break;
- case TIM_CHANNEL_3:
- {
- assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
- if(sClearInputConfig->ClearInputState != RESET)
- {
- /* Enable the Ocref clear feature for Channel 3 */
- htim->Instance->CCMR2 |= TIM_CCMR2_OC3CE;
- }
- else
- {
- /* Disable the Ocref clear feature for Channel 3 */
- htim->Instance->CCMR2 &= ~TIM_CCMR2_OC3CE;
- }
- }
- break;
- case TIM_CHANNEL_4:
- {
- assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
- if(sClearInputConfig->ClearInputState != RESET)
- {
- /* Enable the Ocref clear feature for Channel 4 */
- htim->Instance->CCMR2 |= TIM_CCMR2_OC4CE;
- }
- else
- {
- /* Disable the Ocref clear feature for Channel 4 */
- htim->Instance->CCMR2 &= ~TIM_CCMR2_OC4CE;
- }
- }
- break;
- default:
- break;
- }
-
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Configures the clock source to be used
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param sClockSourceConfig: pointer to a TIM_ClockConfigTypeDef structure that
- * contains the clock source information for the TIM peripheral.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig)
-{
- uint32_t tmpsmcr = 0;
-
- /* Process Locked */
- __HAL_LOCK(htim);
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_TIM_CLOCKSOURCE(sClockSourceConfig->ClockSource));
- assert_param(IS_TIM_CLOCKPOLARITY(sClockSourceConfig->ClockPolarity));
- assert_param(IS_TIM_CLOCKPRESCALER(sClockSourceConfig->ClockPrescaler));
- assert_param(IS_TIM_CLOCKFILTER(sClockSourceConfig->ClockFilter));
-
- /* Reset the SMS, TS, ECE, ETPS and ETRF bits */
- tmpsmcr = htim->Instance->SMCR;
- tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
- tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
- htim->Instance->SMCR = tmpsmcr;
-
- switch (sClockSourceConfig->ClockSource)
- {
- case TIM_CLOCKSOURCE_INTERNAL:
- {
- assert_param(IS_TIM_INSTANCE(htim->Instance));
- /* Disable slave mode to clock the prescaler directly with the internal clock */
- htim->Instance->SMCR &= ~TIM_SMCR_SMS;
- }
- break;
-
- case TIM_CLOCKSOURCE_ETRMODE1:
- {
- assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
- /* Configure the ETR Clock source */
- TIM_ETR_SetConfig(htim->Instance,
- sClockSourceConfig->ClockPrescaler,
- sClockSourceConfig->ClockPolarity,
- sClockSourceConfig->ClockFilter);
- /* Get the TIMx SMCR register value */
- tmpsmcr = htim->Instance->SMCR;
- /* Reset the SMS and TS Bits */
- tmpsmcr &= ~(TIM_SMCR_SMS | TIM_SMCR_TS);
- /* Select the External clock mode1 and the ETRF trigger */
- tmpsmcr |= (TIM_SLAVEMODE_EXTERNAL1 | TIM_CLOCKSOURCE_ETRMODE1);
- /* Write to TIMx SMCR */
- htim->Instance->SMCR = tmpsmcr;
- }
- break;
-
- case TIM_CLOCKSOURCE_ETRMODE2:
- {
- assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
- /* Configure the ETR Clock source */
- TIM_ETR_SetConfig(htim->Instance,
- sClockSourceConfig->ClockPrescaler,
- sClockSourceConfig->ClockPolarity,
- sClockSourceConfig->ClockFilter);
- /* Enable the External clock mode2 */
- htim->Instance->SMCR |= TIM_SMCR_ECE;
- }
- break;
-
- case TIM_CLOCKSOURCE_TI1:
- {
- assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
- TIM_TI1_ConfigInputStage(htim->Instance,
- sClockSourceConfig->ClockPolarity,
- sClockSourceConfig->ClockFilter);
- TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1);
- }
- break;
- case TIM_CLOCKSOURCE_TI2:
- {
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- TIM_TI2_ConfigInputStage(htim->Instance,
- sClockSourceConfig->ClockPolarity,
- sClockSourceConfig->ClockFilter);
- TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI2);
- }
- break;
- case TIM_CLOCKSOURCE_TI1ED:
- {
- assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
- TIM_TI1_ConfigInputStage(htim->Instance,
- sClockSourceConfig->ClockPolarity,
- sClockSourceConfig->ClockFilter);
- TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_TI1ED);
- }
- break;
- case TIM_CLOCKSOURCE_ITR0:
- {
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR0);
- }
- break;
- case TIM_CLOCKSOURCE_ITR1:
- {
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR1);
- }
- break;
- case TIM_CLOCKSOURCE_ITR2:
- {
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR2);
- }
- break;
- case TIM_CLOCKSOURCE_ITR3:
- {
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- TIM_ITRx_SetConfig(htim->Instance, TIM_CLOCKSOURCE_ITR3);
- }
- break;
-
- default:
- break;
- }
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Selects the signal connected to the TI1 input: direct from CH1_input
- * or a XOR combination between CH1_input, CH2_input & CH3_input
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param TI1_Selection: Indicate whether or not channel 1 is connected to the
- * output of a XOR gate.
- * This parameter can be one of the following values:
- * @arg TIM_TI1SELECTION_CH1: The TIMx_CH1 pin is connected to TI1 input
- * @arg TIM_TI1SELECTION_XORCOMBINATION: The TIMx_CH1, CH2 and CH3
- * pins are connected to the TI1 input (XOR combination)
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection)
-{
- uint32_t tmpcr2 = 0;
-
- /* Check the parameters */
- assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
- assert_param(IS_TIM_TI1SELECTION(TI1_Selection));
-
- /* Get the TIMx CR2 register value */
- tmpcr2 = htim->Instance->CR2;
-
- /* Reset the TI1 selection */
- tmpcr2 &= ~TIM_CR2_TI1S;
-
- /* Set the TI1 selection */
- tmpcr2 |= TI1_Selection;
-
- /* Write to TIMxCR2 */
- htim->Instance->CR2 = tmpcr2;
-
- return HAL_OK;
-}
-
-/**
- * @brief Configures the TIM in Slave mode
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param sSlaveConfig: pointer to a TIM_SlaveConfigTypeDef structure that
- * contains the selected trigger (internal trigger input, filtered
- * timer input or external trigger input) and the ) and the Slave
- * mode (Disable, Reset, Gated, Trigger, External clock mode 1).
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig)
-{
- /* Check the parameters */
- assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
- assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
- assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
-
- __HAL_LOCK(htim);
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
-
- /* Disable Trigger Interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_TRIGGER);
-
- /* Disable Trigger DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
-
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Configures the TIM in Slave mode in interrupt mode
- * @param htim: TIM handle.
- * @param sSlaveConfig: pointer to a TIM_SlaveConfigTypeDef structure that
- * contains the selected trigger (internal trigger input, filtered
- * timer input or external trigger input) and the ) and the Slave
- * mode (Disable, Reset, Gated, Trigger, External clock mode 1).
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim,
- TIM_SlaveConfigTypeDef * sSlaveConfig)
-{
- /* Check the parameters */
- assert_param(IS_TIM_SLAVE_INSTANCE(htim->Instance));
- assert_param(IS_TIM_SLAVE_MODE(sSlaveConfig->SlaveMode));
- assert_param(IS_TIM_TRIGGER_SELECTION(sSlaveConfig->InputTrigger));
-
- __HAL_LOCK(htim);
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- TIM_SlaveTimer_SetConfig(htim, sSlaveConfig);
-
- /* Enable Trigger Interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_TRIGGER);
-
- /* Disable Trigger DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_TRIGGER);
-
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Read the captured value from Capture Compare unit
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channels to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval Captured value
- */
-uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- uint32_t tmpreg = 0;
-
- __HAL_LOCK(htim);
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Check the parameters */
- assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
-
- /* Return the capture 1 value */
- tmpreg = htim->Instance->CCR1;
-
- break;
- }
- case TIM_CHANNEL_2:
- {
- /* Check the parameters */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
-
- /* Return the capture 2 value */
- tmpreg = htim->Instance->CCR2;
-
- break;
- }
-
- case TIM_CHANNEL_3:
- {
- /* Check the parameters */
- assert_param(IS_TIM_CC3_INSTANCE(htim->Instance));
-
- /* Return the capture 3 value */
- tmpreg = htim->Instance->CCR3;
-
- break;
- }
-
- case TIM_CHANNEL_4:
- {
- /* Check the parameters */
- assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
-
- /* Return the capture 4 value */
- tmpreg = htim->Instance->CCR4;
-
- break;
- }
-
- default:
- break;
- }
-
- __HAL_UNLOCK(htim);
- return tmpreg;
-}
-/**
- * @}
- */
-
-/** @defgroup TIM_Exported_Functions_Group9 TIM Callbacks functions
- * @brief TIM Callbacks functions
- *
-@verbatim
- ==============================================================================
- ##### TIM Callbacks functions #####
- ==============================================================================
- [..]
- This section provides TIM callback functions:
- (+) Timer Period elapsed callback
- (+) Timer Output Compare callback
- (+) Timer Input capture callback
- (+) Timer Trigger callback
- (+) Timer Error callback
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Period elapsed callback in non blocking mode
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the __HAL_TIM_PeriodElapsedCallback could be implemented in the user file
- */
-
-}
-/**
- * @brief Output Compare callback in non blocking mode
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the __HAL_TIM_OC_DelayElapsedCallback could be implemented in the user file
- */
-}
-/**
- * @brief Input Capture callback in non blocking mode
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the __HAL_TIM_IC_CaptureCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief PWM Pulse finished callback in non blocking mode
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the __HAL_TIM_PWM_PulseFinishedCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Hall Trigger detection callback in non blocking mode
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_TriggerCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Timer error callback in non blocking mode
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIM_ErrorCallback could be implemented in the user file
- */
-}
-/**
- * @}
- */
-
-/** @defgroup TIM_Exported_Functions_Group10 Peripheral State functions
- * @brief Peripheral State functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral State functions #####
- ==============================================================================
- [..]
- This subsection permits to get in run-time the status of the peripheral
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Return the TIM Base state
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL state
- */
-HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim)
-{
- return htim->State;
-}
-
-/**
- * @brief Return the TIM OC state
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL state
- */
-HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim)
-{
- return htim->State;
-}
-
-/**
- * @brief Return the TIM PWM state
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL state
- */
-HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim)
-{
- return htim->State;
-}
-
-/**
- * @brief Return the TIM Input Capture state
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL state
- */
-HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim)
-{
- return htim->State;
-}
-
-/**
- * @brief Return the TIM One Pulse Mode state
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL state
- */
-HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim)
-{
- return htim->State;
-}
-
-/**
- * @brief Return the TIM Encoder Mode state
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL state
- */
-HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim)
-{
- return htim->State;
-}
-/**
- * @}
- */
-
-/**
- * @brief Time Base configuration
- * @param TIMx: TIM peripheral
- * @param Structure: pointer on TIM Time Base required parameters
- * @retval None
- */
-void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure)
-{
- uint32_t tmpcr1 = 0;
- tmpcr1 = TIMx->CR1;
-
- /* Set TIM Time Base Unit parameters ---------------------------------------*/
- if(IS_TIM_CC3_INSTANCE(TIMx) != RESET)
- {
- /* Select the Counter Mode */
- tmpcr1 &= ~(TIM_CR1_DIR | TIM_CR1_CMS);
- tmpcr1 |= Structure->CounterMode;
- }
-
- if(IS_TIM_CC1_INSTANCE(TIMx) != RESET)
- {
- /* Set the clock division */
- tmpcr1 &= ~TIM_CR1_CKD;
- tmpcr1 |= (uint32_t)Structure->ClockDivision;
- }
-
- TIMx->CR1 = tmpcr1;
-
- /* Set the Auto-reload value */
- TIMx->ARR = (uint32_t)Structure->Period ;
-
- /* Set the Prescaler value */
- TIMx->PSC = (uint32_t)Structure->Prescaler;
-
- if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
- {
- /* Set the Repetition Counter value */
- TIMx->RCR = Structure->RepetitionCounter;
- }
-
- /* Generate an update event to reload the Prescaler
- and the repetition counter(only for TIM1 and TIM8) value immediately */
- TIMx->EGR = TIM_EGR_UG;
-}
-
-/**
- * @brief Configure the TI1 as Input.
- * @param TIMx to select the TIM peripheral.
- * @param TIM_ICPolarity : The Input Polarity.
- * This parameter can be one of the following values:
- * @arg TIM_ICPolarity_Rising
- * @arg TIM_ICPolarity_Falling
- * @arg TIM_ICPolarity_BothEdge
- * @param TIM_ICSelection: specifies the input to be used.
- * This parameter can be one of the following values:
- * @arg TIM_ICSelection_DirectTI: TIM Input 1 is selected to be connected to IC1.
- * @arg TIM_ICSelection_IndirectTI: TIM Input 1 is selected to be connected to IC2.
- * @arg TIM_ICSelection_TRC: TIM Input 1 is selected to be connected to TRC.
- * @param TIM_ICFilter: Specifies the Input Capture Filter.
- * This parameter must be a value between 0x00 and 0x0F.
- * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI2FP1
- * (on channel2 path) is used as the input signal. Therefore CCMR1 must be
- * protected against un-initialized filter and polarity values.
- * @retval None
- */
-void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
- uint32_t TIM_ICFilter)
-{
- uint32_t tmpccmr1 = 0;
- uint32_t tmpccer = 0;
-
- /* Disable the Channel 1: Reset the CC1E Bit */
- TIMx->CCER &= ~TIM_CCER_CC1E;
- tmpccmr1 = TIMx->CCMR1;
- tmpccer = TIMx->CCER;
-
- /* Select the Input */
- if(IS_TIM_CC2_INSTANCE(TIMx) != RESET)
- {
- tmpccmr1 &= ~TIM_CCMR1_CC1S;
- tmpccmr1 |= TIM_ICSelection;
- }
- else
- {
- tmpccmr1 &= ~TIM_CCMR1_CC1S;
- tmpccmr1 |= TIM_CCMR1_CC1S_0;
- }
-
- /* Set the filter */
- tmpccmr1 &= ~TIM_CCMR1_IC1F;
- tmpccmr1 |= ((TIM_ICFilter << 4) & TIM_CCMR1_IC1F);
-
- /* Select the Polarity and set the CC1E Bit */
- tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
- tmpccer |= (TIM_ICPolarity & (TIM_CCER_CC1P | TIM_CCER_CC1NP));
-
- /* Write to TIMx CCMR1 and CCER registers */
- TIMx->CCMR1 = tmpccmr1;
- TIMx->CCER = tmpccer;
-}
-
-/**
- * @brief Time Output Compare 2 configuration
- * @param TIMx to select the TIM peripheral
- * @param OC_Config: The output configuration structure
- * @retval None
- */
-void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
-{
- uint32_t tmpccmrx = 0;
- uint32_t tmpccer = 0;
- uint32_t tmpcr2 = 0;
-
- /* Disable the Channel 2: Reset the CC2E Bit */
- TIMx->CCER &= ~TIM_CCER_CC2E;
-
- /* Get the TIMx CCER register value */
- tmpccer = TIMx->CCER;
- /* Get the TIMx CR2 register value */
- tmpcr2 = TIMx->CR2;
-
- /* Get the TIMx CCMR1 register value */
- tmpccmrx = TIMx->CCMR1;
-
- /* Reset the Output Compare mode and Capture/Compare selection Bits */
- tmpccmrx &= ~TIM_CCMR1_OC2M;
- tmpccmrx &= ~TIM_CCMR1_CC2S;
-
- /* Select the Output Compare Mode */
- tmpccmrx |= (OC_Config->OCMode << 8);
-
- /* Reset the Output Polarity level */
- tmpccer &= ~TIM_CCER_CC2P;
- /* Set the Output Compare Polarity */
- tmpccer |= (OC_Config->OCPolarity << 4);
-
- if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
- {
- assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
- assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
- assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
-
- /* Reset the Output N Polarity level */
- tmpccer &= ~TIM_CCER_CC2NP;
- /* Set the Output N Polarity */
- tmpccer |= (OC_Config->OCNPolarity << 4);
- /* Reset the Output N State */
- tmpccer &= ~TIM_CCER_CC2NE;
-
- /* Reset the Output Compare and Output Compare N IDLE State */
- tmpcr2 &= ~TIM_CR2_OIS2;
- tmpcr2 &= ~TIM_CR2_OIS2N;
- /* Set the Output Idle state */
- tmpcr2 |= (OC_Config->OCIdleState << 2);
- /* Set the Output N Idle state */
- tmpcr2 |= (OC_Config->OCNIdleState << 2);
- }
- /* Write to TIMx CR2 */
- TIMx->CR2 = tmpcr2;
-
- /* Write to TIMx CCMR1 */
- TIMx->CCMR1 = tmpccmrx;
-
- /* Set the Capture Compare Register value */
- TIMx->CCR2 = OC_Config->Pulse;
-
- /* Write to TIMx CCER */
- TIMx->CCER = tmpccer;
-}
-
-/**
- * @brief TIM DMA Delay Pulse complete callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma)
-{
- TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- htim->State= HAL_TIM_STATE_READY;
-
- if(hdma == htim->hdma[TIM_DMA_ID_CC1])
- {
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
- }
- else if(hdma == htim->hdma[TIM_DMA_ID_CC2])
- {
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
- }
- else if(hdma == htim->hdma[TIM_DMA_ID_CC3])
- {
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
- }
- else if(hdma == htim->hdma[TIM_DMA_ID_CC4])
- {
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
- }
-
- HAL_TIM_PWM_PulseFinishedCallback(htim);
-
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
-}
-
-/**
- * @brief TIM DMA error callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-void TIM_DMAError(DMA_HandleTypeDef *hdma)
-{
- TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- htim->State= HAL_TIM_STATE_READY;
-
- HAL_TIM_ErrorCallback(htim);
-}
-
-/**
- * @brief TIM DMA Capture complete callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma)
-{
- TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- htim->State= HAL_TIM_STATE_READY;
-
- if(hdma == htim->hdma[TIM_DMA_ID_CC1])
- {
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_1;
- }
- else if(hdma == htim->hdma[TIM_DMA_ID_CC2])
- {
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_2;
- }
- else if(hdma == htim->hdma[TIM_DMA_ID_CC3])
- {
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_3;
- }
- else if(hdma == htim->hdma[TIM_DMA_ID_CC4])
- {
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_4;
- }
-
- HAL_TIM_IC_CaptureCallback(htim);
-
- htim->Channel = HAL_TIM_ACTIVE_CHANNEL_CLEARED;
-}
-
-/**
- * @brief Enables or disables the TIM Capture Compare Channel x.
- * @param TIMx to select the TIM peripheral
- * @param Channel: specifies the TIM Channel
- * This parameter can be one of the following values:
- * @arg TIM_Channel_1: TIM Channel 1
- * @arg TIM_Channel_2: TIM Channel 2
- * @arg TIM_Channel_3: TIM Channel 3
- * @arg TIM_Channel_4: TIM Channel 4
- * @param ChannelState: specifies the TIM Channel CCxE bit new state.
- * This parameter can be: TIM_CCx_ENABLE or TIM_CCx_Disable.
- * @retval None
- */
-void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState)
-{
- uint32_t tmp = 0;
-
- /* Check the parameters */
- assert_param(IS_TIM_CC1_INSTANCE(TIMx));
- assert_param(IS_TIM_CHANNELS(Channel));
-
- tmp = TIM_CCER_CC1E << Channel;
-
- /* Reset the CCxE Bit */
- TIMx->CCER &= ~tmp;
-
- /* Set or reset the CCxE Bit */
- TIMx->CCER |= (uint32_t)(ChannelState << Channel);
-}
-
-/**
- * @brief TIM DMA Period Elapse complete callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void TIM_DMAPeriodElapsedCplt(DMA_HandleTypeDef *hdma)
-{
- TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- htim->State= HAL_TIM_STATE_READY;
-
- HAL_TIM_PeriodElapsedCallback(htim);
-}
-
-/**
- * @brief TIM DMA Trigger callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void TIM_DMATriggerCplt(DMA_HandleTypeDef *hdma)
-{
- TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- htim->State= HAL_TIM_STATE_READY;
-
- HAL_TIM_TriggerCallback(htim);
-}
-
-/**
- * @brief Time Output Compare 1 configuration
- * @param TIMx to select the TIM peripheral
- * @param OC_Config: The output configuration structure
- * @retval None
- */
-static void TIM_OC1_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
-{
- uint32_t tmpccmrx = 0;
- uint32_t tmpccer = 0;
- uint32_t tmpcr2 = 0;
-
- /* Disable the Channel 1: Reset the CC1E Bit */
- TIMx->CCER &= ~TIM_CCER_CC1E;
-
- /* Get the TIMx CCER register value */
- tmpccer = TIMx->CCER;
- /* Get the TIMx CR2 register value */
- tmpcr2 = TIMx->CR2;
-
- /* Get the TIMx CCMR1 register value */
- tmpccmrx = TIMx->CCMR1;
-
- /* Reset the Output Compare Mode Bits */
- tmpccmrx &= ~TIM_CCMR1_OC1M;
- tmpccmrx &= ~TIM_CCMR1_CC1S;
- /* Select the Output Compare Mode */
- tmpccmrx |= OC_Config->OCMode;
-
- /* Reset the Output Polarity level */
- tmpccer &= ~TIM_CCER_CC1P;
- /* Set the Output Compare Polarity */
- tmpccer |= OC_Config->OCPolarity;
-
-
- if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
- {
- /* Reset the Output N Polarity level */
- tmpccer &= ~TIM_CCER_CC1NP;
- /* Set the Output N Polarity */
- tmpccer |= OC_Config->OCNPolarity;
- /* Reset the Output N State */
- tmpccer &= ~TIM_CCER_CC1NE;
-
- /* Reset the Output Compare and Output Compare N IDLE State */
- tmpcr2 &= ~TIM_CR2_OIS1;
- tmpcr2 &= ~TIM_CR2_OIS1N;
- /* Set the Output Idle state */
- tmpcr2 |= OC_Config->OCIdleState;
- /* Set the Output N Idle state */
- tmpcr2 |= OC_Config->OCNIdleState;
- }
- /* Write to TIMx CR2 */
- TIMx->CR2 = tmpcr2;
-
- /* Write to TIMx CCMR1 */
- TIMx->CCMR1 = tmpccmrx;
-
- /* Set the Capture Compare Register value */
- TIMx->CCR1 = OC_Config->Pulse;
-
- /* Write to TIMx CCER */
- TIMx->CCER = tmpccer;
-}
-
-/**
- * @brief Time Output Compare 3 configuration
- * @param TIMx to select the TIM peripheral
- * @param OC_Config: The output configuration structure
- * @retval None
- */
-static void TIM_OC3_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
-{
- uint32_t tmpccmrx = 0;
- uint32_t tmpccer = 0;
- uint32_t tmpcr2 = 0;
-
- /* Disable the Channel 3: Reset the CC2E Bit */
- TIMx->CCER &= ~TIM_CCER_CC3E;
-
- /* Get the TIMx CCER register value */
- tmpccer = TIMx->CCER;
- /* Get the TIMx CR2 register value */
- tmpcr2 = TIMx->CR2;
-
- /* Get the TIMx CCMR2 register value */
- tmpccmrx = TIMx->CCMR2;
-
- /* Reset the Output Compare mode and Capture/Compare selection Bits */
- tmpccmrx &= ~TIM_CCMR2_OC3M;
- tmpccmrx &= ~TIM_CCMR2_CC3S;
- /* Select the Output Compare Mode */
- tmpccmrx |= OC_Config->OCMode;
-
- /* Reset the Output Polarity level */
- tmpccer &= ~TIM_CCER_CC3P;
- /* Set the Output Compare Polarity */
- tmpccer |= (OC_Config->OCPolarity << 8);
-
- if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
- {
- assert_param(IS_TIM_OCN_POLARITY(OC_Config->OCNPolarity));
- assert_param(IS_TIM_OCNIDLE_STATE(OC_Config->OCNIdleState));
- assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
-
- /* Reset the Output N Polarity level */
- tmpccer &= ~TIM_CCER_CC3NP;
- /* Set the Output N Polarity */
- tmpccer |= (OC_Config->OCNPolarity << 8);
- /* Reset the Output N State */
- tmpccer &= ~TIM_CCER_CC3NE;
-
- /* Reset the Output Compare and Output Compare N IDLE State */
- tmpcr2 &= ~TIM_CR2_OIS3;
- tmpcr2 &= ~TIM_CR2_OIS3N;
- /* Set the Output Idle state */
- tmpcr2 |= (OC_Config->OCIdleState << 4);
- /* Set the Output N Idle state */
- tmpcr2 |= (OC_Config->OCNIdleState << 4);
- }
- /* Write to TIMx CR2 */
- TIMx->CR2 = tmpcr2;
-
- /* Write to TIMx CCMR2 */
- TIMx->CCMR2 = tmpccmrx;
-
- /* Set the Capture Compare Register value */
- TIMx->CCR3 = OC_Config->Pulse;
-
- /* Write to TIMx CCER */
- TIMx->CCER = tmpccer;
-}
-
-/**
- * @brief Time Output Compare 4 configuration
- * @param TIMx to select the TIM peripheral
- * @param OC_Config: The output configuration structure
- * @retval None
- */
-static void TIM_OC4_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config)
-{
- uint32_t tmpccmrx = 0;
- uint32_t tmpccer = 0;
- uint32_t tmpcr2 = 0;
-
- /* Disable the Channel 4: Reset the CC4E Bit */
- TIMx->CCER &= ~TIM_CCER_CC4E;
-
- /* Get the TIMx CCER register value */
- tmpccer = TIMx->CCER;
- /* Get the TIMx CR2 register value */
- tmpcr2 = TIMx->CR2;
-
- /* Get the TIMx CCMR2 register value */
- tmpccmrx = TIMx->CCMR2;
-
- /* Reset the Output Compare mode and Capture/Compare selection Bits */
- tmpccmrx &= ~TIM_CCMR2_OC4M;
- tmpccmrx &= ~TIM_CCMR2_CC4S;
-
- /* Select the Output Compare Mode */
- tmpccmrx |= (OC_Config->OCMode << 8);
-
- /* Reset the Output Polarity level */
- tmpccer &= ~TIM_CCER_CC4P;
- /* Set the Output Compare Polarity */
- tmpccer |= (OC_Config->OCPolarity << 12);
-
- /*if((TIMx == TIM1) || (TIMx == TIM8))*/
- if(IS_TIM_ADVANCED_INSTANCE(TIMx) != RESET)
- {
- assert_param(IS_TIM_OCIDLE_STATE(OC_Config->OCIdleState));
- /* Reset the Output Compare IDLE State */
- tmpcr2 &= ~TIM_CR2_OIS4;
- /* Set the Output Idle state */
- tmpcr2 |= (OC_Config->OCIdleState << 6);
- }
- /* Write to TIMx CR2 */
- TIMx->CR2 = tmpcr2;
-
- /* Write to TIMx CCMR2 */
- TIMx->CCMR2 = tmpccmrx;
-
- /* Set the Capture Compare Register value */
- TIMx->CCR4 = OC_Config->Pulse;
-
- /* Write to TIMx CCER */
- TIMx->CCER = tmpccer;
-}
-
-/**
- * @brief Time Output Compare 4 configuration
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param sSlaveConfig: The slave configuration structure
- * @retval None
- */
-static void TIM_SlaveTimer_SetConfig(TIM_HandleTypeDef *htim,
- TIM_SlaveConfigTypeDef * sSlaveConfig)
-{
- uint32_t tmpsmcr = 0;
- uint32_t tmpccmr1 = 0;
- uint32_t tmpccer = 0;
-
- /* Get the TIMx SMCR register value */
- tmpsmcr = htim->Instance->SMCR;
-
- /* Reset the Trigger Selection Bits */
- tmpsmcr &= ~TIM_SMCR_TS;
- /* Set the Input Trigger source */
- tmpsmcr |= sSlaveConfig->InputTrigger;
-
- /* Reset the slave mode Bits */
- tmpsmcr &= ~TIM_SMCR_SMS;
- /* Set the slave mode */
- tmpsmcr |= sSlaveConfig->SlaveMode;
-
- /* Write to TIMx SMCR */
- htim->Instance->SMCR = tmpsmcr;
-
- /* Configure the trigger prescaler, filter, and polarity */
- switch (sSlaveConfig->InputTrigger)
- {
- case TIM_TS_ETRF:
- {
- /* Check the parameters */
- assert_param(IS_TIM_ETR_INSTANCE(htim->Instance));
- assert_param(IS_TIM_TRIGGERPRESCALER(sSlaveConfig->TriggerPrescaler));
- assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
- assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
- /* Configure the ETR Trigger source */
- TIM_ETR_SetConfig(htim->Instance,
- sSlaveConfig->TriggerPrescaler,
- sSlaveConfig->TriggerPolarity,
- sSlaveConfig->TriggerFilter);
- }
- break;
-
- case TIM_TS_TI1F_ED:
- {
- /* Check the parameters */
- assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
- assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
-
- /* Disable the Channel 1: Reset the CC1E Bit */
- tmpccer = htim->Instance->CCER;
- htim->Instance->CCER &= ~TIM_CCER_CC1E;
- tmpccmr1 = htim->Instance->CCMR1;
-
- /* Set the filter */
- tmpccmr1 &= ~TIM_CCMR1_IC1F;
- tmpccmr1 |= ((sSlaveConfig->TriggerFilter) << 4);
-
- /* Write to TIMx CCMR1 and CCER registers */
- htim->Instance->CCMR1 = tmpccmr1;
- htim->Instance->CCER = tmpccer;
-
- }
- break;
-
- case TIM_TS_TI1FP1:
- {
- /* Check the parameters */
- assert_param(IS_TIM_CC1_INSTANCE(htim->Instance));
- assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
- assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
-
- /* Configure TI1 Filter and Polarity */
- TIM_TI1_ConfigInputStage(htim->Instance,
- sSlaveConfig->TriggerPolarity,
- sSlaveConfig->TriggerFilter);
- }
- break;
-
- case TIM_TS_TI2FP2:
- {
- /* Check the parameters */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- assert_param(IS_TIM_TRIGGERPOLARITY(sSlaveConfig->TriggerPolarity));
- assert_param(IS_TIM_TRIGGERFILTER(sSlaveConfig->TriggerFilter));
-
- /* Configure TI2 Filter and Polarity */
- TIM_TI2_ConfigInputStage(htim->Instance,
- sSlaveConfig->TriggerPolarity,
- sSlaveConfig->TriggerFilter);
- }
- break;
-
- case TIM_TS_ITR0:
- {
- /* Check the parameter */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- }
- break;
-
- case TIM_TS_ITR1:
- {
- /* Check the parameter */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- }
- break;
-
- case TIM_TS_ITR2:
- {
- /* Check the parameter */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- }
- break;
-
- case TIM_TS_ITR3:
- {
- /* Check the parameter */
- assert_param(IS_TIM_CC2_INSTANCE(htim->Instance));
- }
- break;
-
- default:
- break;
- }
-}
-
-
-/**
- * @brief Configure the Polarity and Filter for TI1.
- * @param TIMx to select the TIM peripheral.
- * @param TIM_ICPolarity : The Input Polarity.
- * This parameter can be one of the following values:
- * @arg TIM_ICPolarity_Rising
- * @arg TIM_ICPolarity_Falling
- * @arg TIM_ICPolarity_BothEdge
- * @param TIM_ICFilter: Specifies the Input Capture Filter.
- * This parameter must be a value between 0x00 and 0x0F.
- * @retval None
- */
-static void TIM_TI1_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
-{
- uint32_t tmpccmr1 = 0;
- uint32_t tmpccer = 0;
-
- /* Disable the Channel 1: Reset the CC1E Bit */
- tmpccer = TIMx->CCER;
- TIMx->CCER &= ~TIM_CCER_CC1E;
- tmpccmr1 = TIMx->CCMR1;
-
- /* Set the filter */
- tmpccmr1 &= ~TIM_CCMR1_IC1F;
- tmpccmr1 |= (TIM_ICFilter << 4);
-
- /* Select the Polarity and set the CC1E Bit */
- tmpccer &= ~(TIM_CCER_CC1P | TIM_CCER_CC1NP);
- tmpccer |= TIM_ICPolarity;
-
- /* Write to TIMx CCMR1 and CCER registers */
- TIMx->CCMR1 = tmpccmr1;
- TIMx->CCER = tmpccer;
-}
-
-/**
- * @brief Configure the TI2 as Input.
- * @param TIMx to select the TIM peripheral
- * @param TIM_ICPolarity : The Input Polarity.
- * This parameter can be one of the following values:
- * @arg TIM_ICPolarity_Rising
- * @arg TIM_ICPolarity_Falling
- * @arg TIM_ICPolarity_BothEdge
- * @param TIM_ICSelection: specifies the input to be used.
- * This parameter can be one of the following values:
- * @arg TIM_ICSelection_DirectTI: TIM Input 2 is selected to be connected to IC2.
- * @arg TIM_ICSelection_IndirectTI: TIM Input 2 is selected to be connected to IC1.
- * @arg TIM_ICSelection_TRC: TIM Input 2 is selected to be connected to TRC.
- * @param TIM_ICFilter: Specifies the Input Capture Filter.
- * This parameter must be a value between 0x00 and 0x0F.
- * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI1FP2
- * (on channel1 path) is used as the input signal. Therefore CCMR1 must be
- * protected against un-initialized filter and polarity values.
- * @retval None
- */
-static void TIM_TI2_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
- uint32_t TIM_ICFilter)
-{
- uint32_t tmpccmr1 = 0;
- uint32_t tmpccer = 0;
-
- /* Disable the Channel 2: Reset the CC2E Bit */
- TIMx->CCER &= ~TIM_CCER_CC2E;
- tmpccmr1 = TIMx->CCMR1;
- tmpccer = TIMx->CCER;
-
- /* Select the Input */
- tmpccmr1 &= ~TIM_CCMR1_CC2S;
- tmpccmr1 |= (TIM_ICSelection << 8);
-
- /* Set the filter */
- tmpccmr1 &= ~TIM_CCMR1_IC2F;
- tmpccmr1 |= ((TIM_ICFilter << 12) & TIM_CCMR1_IC2F);
-
- /* Select the Polarity and set the CC2E Bit */
- tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
- tmpccer |= ((TIM_ICPolarity << 4) & (TIM_CCER_CC2P | TIM_CCER_CC2NP));
-
- /* Write to TIMx CCMR1 and CCER registers */
- TIMx->CCMR1 = tmpccmr1 ;
- TIMx->CCER = tmpccer;
-}
-
-/**
- * @brief Configure the Polarity and Filter for TI2.
- * @param TIMx to select the TIM peripheral.
- * @param TIM_ICPolarity : The Input Polarity.
- * This parameter can be one of the following values:
- * @arg TIM_ICPolarity_Rising
- * @arg TIM_ICPolarity_Falling
- * @arg TIM_ICPolarity_BothEdge
- * @param TIM_ICFilter: Specifies the Input Capture Filter.
- * This parameter must be a value between 0x00 and 0x0F.
- * @retval None
- */
-static void TIM_TI2_ConfigInputStage(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICFilter)
-{
- uint32_t tmpccmr1 = 0;
- uint32_t tmpccer = 0;
-
- /* Disable the Channel 2: Reset the CC2E Bit */
- TIMx->CCER &= ~TIM_CCER_CC2E;
- tmpccmr1 = TIMx->CCMR1;
- tmpccer = TIMx->CCER;
-
- /* Set the filter */
- tmpccmr1 &= ~TIM_CCMR1_IC2F;
- tmpccmr1 |= (TIM_ICFilter << 12);
-
- /* Select the Polarity and set the CC2E Bit */
- tmpccer &= ~(TIM_CCER_CC2P | TIM_CCER_CC2NP);
- tmpccer |= (TIM_ICPolarity << 4);
-
- /* Write to TIMx CCMR1 and CCER registers */
- TIMx->CCMR1 = tmpccmr1 ;
- TIMx->CCER = tmpccer;
-}
-
-/**
- * @brief Configure the TI3 as Input.
- * @param TIMx to select the TIM peripheral
- * @param TIM_ICPolarity : The Input Polarity.
- * This parameter can be one of the following values:
- * @arg TIM_ICPolarity_Rising
- * @arg TIM_ICPolarity_Falling
- * @arg TIM_ICPolarity_BothEdge
- * @param TIM_ICSelection: specifies the input to be used.
- * This parameter can be one of the following values:
- * @arg TIM_ICSelection_DirectTI: TIM Input 3 is selected to be connected to IC3.
- * @arg TIM_ICSelection_IndirectTI: TIM Input 3 is selected to be connected to IC4.
- * @arg TIM_ICSelection_TRC: TIM Input 3 is selected to be connected to TRC.
- * @param TIM_ICFilter: Specifies the Input Capture Filter.
- * This parameter must be a value between 0x00 and 0x0F.
- * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI4FP3
- * (on channel4 path) is used as the input signal. Therefore CCMR2 must be
- * protected against un-initialized filter and polarity values.
- * @retval None
- */
-static void TIM_TI3_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
- uint32_t TIM_ICFilter)
-{
- uint32_t tmpccmr2 = 0;
- uint32_t tmpccer = 0;
-
- /* Disable the Channel 3: Reset the CC3E Bit */
- TIMx->CCER &= ~TIM_CCER_CC3E;
- tmpccmr2 = TIMx->CCMR2;
- tmpccer = TIMx->CCER;
-
- /* Select the Input */
- tmpccmr2 &= ~TIM_CCMR2_CC3S;
- tmpccmr2 |= TIM_ICSelection;
-
- /* Set the filter */
- tmpccmr2 &= ~TIM_CCMR2_IC3F;
- tmpccmr2 |= ((TIM_ICFilter << 4) & TIM_CCMR2_IC3F);
-
- /* Select the Polarity and set the CC3E Bit */
- tmpccer &= ~(TIM_CCER_CC3P | TIM_CCER_CC3NP);
- tmpccer |= ((TIM_ICPolarity << 8) & (TIM_CCER_CC3P | TIM_CCER_CC3NP));
-
- /* Write to TIMx CCMR2 and CCER registers */
- TIMx->CCMR2 = tmpccmr2;
- TIMx->CCER = tmpccer;
-}
-
-/**
- * @brief Configure the TI4 as Input.
- * @param TIMx to select the TIM peripheral
- * @param TIM_ICPolarity : The Input Polarity.
- * This parameter can be one of the following values:
- * @arg TIM_ICPolarity_Rising
- * @arg TIM_ICPolarity_Falling
- * @arg TIM_ICPolarity_BothEdge
- * @param TIM_ICSelection: specifies the input to be used.
- * This parameter can be one of the following values:
- * @arg TIM_ICSelection_DirectTI: TIM Input 4 is selected to be connected to IC4.
- * @arg TIM_ICSelection_IndirectTI: TIM Input 4 is selected to be connected to IC3.
- * @arg TIM_ICSelection_TRC: TIM Input 4 is selected to be connected to TRC.
- * @param TIM_ICFilter: Specifies the Input Capture Filter.
- * This parameter must be a value between 0x00 and 0x0F.
- * @note TIM_ICFilter and TIM_ICPolarity are not used in INDIRECT mode as TI3FP4
- * (on channel3 path) is used as the input signal. Therefore CCMR2 must be
- * protected against un-initialized filter and polarity values.
- * @retval None
- */
-static void TIM_TI4_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection,
- uint32_t TIM_ICFilter)
-{
- uint32_t tmpccmr2 = 0;
- uint32_t tmpccer = 0;
-
- /* Disable the Channel 4: Reset the CC4E Bit */
- TIMx->CCER &= ~TIM_CCER_CC4E;
- tmpccmr2 = TIMx->CCMR2;
- tmpccer = TIMx->CCER;
-
- /* Select the Input */
- tmpccmr2 &= ~TIM_CCMR2_CC4S;
- tmpccmr2 |= (TIM_ICSelection << 8);
-
- /* Set the filter */
- tmpccmr2 &= ~TIM_CCMR2_IC4F;
- tmpccmr2 |= ((TIM_ICFilter << 12) & TIM_CCMR2_IC4F);
-
- /* Select the Polarity and set the CC4E Bit */
- tmpccer &= ~(TIM_CCER_CC4P | TIM_CCER_CC4NP);
- tmpccer |= ((TIM_ICPolarity << 12) & (TIM_CCER_CC4P | TIM_CCER_CC4NP));
-
- /* Write to TIMx CCMR2 and CCER registers */
- TIMx->CCMR2 = tmpccmr2;
- TIMx->CCER = tmpccer ;
-}
-
-/**
- * @brief Selects the Input Trigger source
- * @param TIMx to select the TIM peripheral
- * @param TIM_ITRx: The Input Trigger source.
- * This parameter can be one of the following values:
- * @arg TIM_TS_ITR0: Internal Trigger 0
- * @arg TIM_TS_ITR1: Internal Trigger 1
- * @arg TIM_TS_ITR2: Internal Trigger 2
- * @arg TIM_TS_ITR3: Internal Trigger 3
- * @arg TIM_TS_TI1F_ED: TI1 Edge Detector
- * @arg TIM_TS_TI1FP1: Filtered Timer Input 1
- * @arg TIM_TS_TI2FP2: Filtered Timer Input 2
- * @arg TIM_TS_ETRF: External Trigger input
- * @retval None
- */
-static void TIM_ITRx_SetConfig(TIM_TypeDef *TIMx, uint16_t TIM_ITRx)
-{
- uint32_t tmpsmcr = 0;
-
- /* Get the TIMx SMCR register value */
- tmpsmcr = TIMx->SMCR;
- /* Reset the TS Bits */
- tmpsmcr &= ~TIM_SMCR_TS;
- /* Set the Input Trigger source and the slave mode*/
- tmpsmcr |= TIM_ITRx | TIM_SLAVEMODE_EXTERNAL1;
- /* Write to TIMx SMCR */
- TIMx->SMCR = tmpsmcr;
-}
-
-/**
- * @brief Configures the TIMx External Trigger (ETR).
- * @param TIMx to select the TIM peripheral
- * @param TIM_ExtTRGPrescaler: The external Trigger Prescaler.
- * This parameter can be one of the following values:
- * @arg TIM_ExtTRGPSC_DIV1: ETRP Prescaler OFF.
- * @arg TIM_ExtTRGPSC_DIV2: ETRP frequency divided by 2.
- * @arg TIM_ExtTRGPSC_DIV4: ETRP frequency divided by 4.
- * @arg TIM_ExtTRGPSC_DIV8: ETRP frequency divided by 8.
- * @param TIM_ExtTRGPolarity: The external Trigger Polarity.
- * This parameter can be one of the following values:
- * @arg TIM_ExtTRGPolarity_Inverted: active low or falling edge active.
- * @arg TIM_ExtTRGPolarity_NonInverted: active high or rising edge active.
- * @param ExtTRGFilter: External Trigger Filter.
- * This parameter must be a value between 0x00 and 0x0F
- * @retval None
- */
-static void TIM_ETR_SetConfig(TIM_TypeDef* TIMx, uint32_t TIM_ExtTRGPrescaler,
- uint32_t TIM_ExtTRGPolarity, uint32_t ExtTRGFilter)
-{
- uint32_t tmpsmcr = 0;
-
- tmpsmcr = TIMx->SMCR;
-
- /* Reset the ETR Bits */
- tmpsmcr &= ~(TIM_SMCR_ETF | TIM_SMCR_ETPS | TIM_SMCR_ECE | TIM_SMCR_ETP);
-
- /* Set the Prescaler, the Filter value and the Polarity */
- tmpsmcr |= (uint32_t)(TIM_ExtTRGPrescaler | (TIM_ExtTRGPolarity | (ExtTRGFilter << 8)));
-
- /* Write to TIMx SMCR */
- TIMx->SMCR = tmpsmcr;
-}
-
-/**
- * @}
- */
-
-#endif /* HAL_TIM_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c
deleted file mode 100644
index 8140283..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_tim_ex.c
+++ /dev/null
@@ -1,1864 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_tim_ex.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief TIM HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Timer extension peripheral:
- * + Time Hall Sensor Interface Initialization
- * + Time Hall Sensor Interface Start
- * + Time Complementary signal bread and dead time configuration
- * + Time Master and Slave synchronization configuration
- @verbatim
- ==============================================================================
- ##### TIMER Extended features #####
- ==============================================================================
- [..]
- The Timer Extension features include:
- (#) Complementary outputs with programmable dead-time for :
- (++) Input Capture
- (++) Output Compare
- (++) PWM generation (Edge and Center-aligned Mode)
- (++) One-pulse mode output
- (#) Synchronization circuit to control the timer with external signals and to
- interconnect several timers together.
- (#) Break input to put the timer output signals in reset state or in a known state.
- (#) Supports incremental (quadrature) encoder and hall-sensor circuitry for
- positioning purposes
-
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (#) Initialize the TIM low level resources by implementing the following functions
- depending from feature used :
- (++) Complementary Output Compare : HAL_TIM_OC_MspInit()
- (++) Complementary PWM generation : HAL_TIM_PWM_MspInit()
- (++) Complementary One-pulse mode output : HAL_TIM_OnePulse_MspInit()
- (++) Hall Sensor output : HAL_TIM_HallSensor_MspInit()
-
- (#) Initialize the TIM low level resources :
- (##) Enable the TIM interface clock using __TIMx_CLK_ENABLE();
- (##) TIM pins configuration
- (+++) Enable the clock for the TIM GPIOs using the following function:
- __GPIOx_CLK_ENABLE();
- (+++) Configure these TIM pins in Alternate function mode using HAL_GPIO_Init();
-
- (#) The external Clock can be configured, if needed (the default clock is the
- internal clock from the APBx), using the following function:
- HAL_TIM_ConfigClockSource, the clock configuration should be done before
- any start function.
-
- (#) Configure the TIM in the desired functioning mode using one of the
- initialization function of this driver:
- (++) HAL_TIMEx_HallSensor_Init and HAL_TIMEx_ConfigCommutationEvent: to use the
- Timer Hall Sensor Interface and the commutation event with the corresponding
- Interrupt and DMA request if needed (Note that One Timer is used to interface
- with the Hall sensor Interface and another Timer should be used to use
- the commutation event).
-
- (#) Activate the TIM peripheral using one of the start functions:
- (++) Complementary Output Compare : HAL_TIMEx_OCN_Start(), HAL_TIMEx_OCN_Start_DMA(), HAL_TIMEx_OC_Start_IT()
- (++) Complementary PWM generation : HAL_TIMEx_PWMN_Start(), HAL_TIMEx_PWMN_Start_DMA(), HAL_TIMEx_PWMN_Start_IT()
- (++) Complementary One-pulse mode output : HAL_TIMEx_OnePulseN_Start(), HAL_TIMEx_OnePulseN_Start_IT()
- (++) Hall Sensor output : HAL_TIMEx_HallSensor_Start(), HAL_TIMEx_HallSensor_Start_DMA(), HAL_TIMEx_HallSensor_Start_IT().
-
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup TIMEx TIMEx
- * @brief TIM HAL module driver
- * @{
- */
-
-#ifdef HAL_TIM_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/** @addtogroup TIMEx_Private_Functions
- * @{
- */
-/* Private function prototypes -----------------------------------------------*/
-static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState);
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup TIMEx_Exported_Functions TIM Exported Functions
- * @{
- */
-
-/** @defgroup TIMEx_Exported_Functions_Group1 Timer Hall Sensor functions
- * @brief Timer Hall Sensor functions
- *
-@verbatim
- ==============================================================================
- ##### Timer Hall Sensor functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure TIM HAL Sensor.
- (+) De-initialize TIM HAL Sensor.
- (+) Start the Hall Sensor Interface.
- (+) Stop the Hall Sensor Interface.
- (+) Start the Hall Sensor Interface and enable interrupts.
- (+) Stop the Hall Sensor Interface and disable interrupts.
- (+) Start the Hall Sensor Interface and enable DMA transfers.
- (+) Stop the Hall Sensor Interface and disable DMA transfers.
-
-@endverbatim
- * @{
- */
-/**
- * @brief Initializes the TIM Hall Sensor Interface and create the associated handle.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param sConfig: TIM Hall Sensor configuration structure
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef *htim, TIM_HallSensor_InitTypeDef* sConfig)
-{
- TIM_OC_InitTypeDef OC_Config;
-
- /* Check the TIM handle allocation */
- if(htim == NULL)
- {
- return HAL_ERROR;
- }
-
- assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
- assert_param(IS_TIM_COUNTER_MODE(htim->Init.CounterMode));
- assert_param(IS_TIM_CLOCKDIVISION_DIV(htim->Init.ClockDivision));
- assert_param(IS_TIM_IC_POLARITY(sConfig->IC1Polarity));
- assert_param(IS_TIM_IC_PRESCALER(sConfig->IC1Prescaler));
- assert_param(IS_TIM_IC_FILTER(sConfig->IC1Filter));
-
- /* Set the TIM state */
- htim->State= HAL_TIM_STATE_BUSY;
-
- /* Init the low level hardware : GPIO, CLOCK, NVIC and DMA */
- HAL_TIMEx_HallSensor_MspInit(htim);
-
- /* Configure the Time base in the Encoder Mode */
- TIM_Base_SetConfig(htim->Instance, &htim->Init);
-
- /* Configure the Channel 1 as Input Channel to interface with the three Outputs of the Hall sensor */
- TIM_TI1_SetConfig(htim->Instance, sConfig->IC1Polarity, TIM_ICSELECTION_TRC, sConfig->IC1Filter);
-
- /* Reset the IC1PSC Bits */
- htim->Instance->CCMR1 &= ~TIM_CCMR1_IC1PSC;
- /* Set the IC1PSC value */
- htim->Instance->CCMR1 |= sConfig->IC1Prescaler;
-
- /* Enable the Hall sensor interface (XOR function of the three inputs) */
- htim->Instance->CR2 |= TIM_CR2_TI1S;
-
- /* Select the TIM_TS_TI1F_ED signal as Input trigger for the TIM */
- htim->Instance->SMCR &= ~TIM_SMCR_TS;
- htim->Instance->SMCR |= TIM_TS_TI1F_ED;
-
- /* Use the TIM_TS_TI1F_ED signal to reset the TIM counter each edge detection */
- htim->Instance->SMCR &= ~TIM_SMCR_SMS;
- htim->Instance->SMCR |= TIM_SLAVEMODE_RESET;
-
- /* Program channel 2 in PWM 2 mode with the desired Commutation_Delay*/
- OC_Config.OCFastMode = TIM_OCFAST_DISABLE;
- OC_Config.OCIdleState = TIM_OCIDLESTATE_RESET;
- OC_Config.OCMode = TIM_OCMODE_PWM2;
- OC_Config.OCNIdleState = TIM_OCNIDLESTATE_RESET;
- OC_Config.OCNPolarity = TIM_OCNPOLARITY_HIGH;
- OC_Config.OCPolarity = TIM_OCPOLARITY_HIGH;
- OC_Config.Pulse = sConfig->Commutation_Delay;
-
- TIM_OC2_SetConfig(htim->Instance, &OC_Config);
-
- /* Select OC2REF as trigger output on TRGO: write the MMS bits in the TIMx_CR2
- register to 101 */
- htim->Instance->CR2 &= ~TIM_CR2_MMS;
- htim->Instance->CR2 |= TIM_TRGO_OC2REF;
-
- /* Initialize the TIM state*/
- htim->State= HAL_TIM_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the TIM Hall Sensor interface
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_INSTANCE(htim->Instance));
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Disable the TIM Peripheral Clock */
- __HAL_TIM_DISABLE(htim);
-
- /* DeInit the low level hardware: GPIO, CLOCK, NVIC */
- HAL_TIMEx_HallSensor_MspDeInit(htim);
-
- /* Change TIM state */
- htim->State = HAL_TIM_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the TIM Hall Sensor MSP.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIMEx_HallSensor_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes TIM Hall Sensor MSP.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIMEx_HallSensor_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @brief Starts the TIM Hall Sensor Interface.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
-
- /* Enable the Input Capture channels 1
- (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Hall sensor Interface.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
-
- /* Disable the Input Capture channels 1, 2 and 3
- (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Hall Sensor Interface in interrupt mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
-
- /* Enable the capture compare Interrupts 1 event */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
-
- /* Enable the Input Capture channels 1
- (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Hall Sensor Interface in interrupt mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
-
- /* Disable the Input Capture channels 1
- (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
-
- /* Disable the capture compare Interrupts event */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Hall Sensor Interface in DMA mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param pData: The destination Buffer address.
- * @param Length: The length of data to be transferred from TIM peripheral to memory.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length)
-{
- /* Check the parameters */
- assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
-
- if((htim->State == HAL_TIM_STATE_BUSY))
- {
- return HAL_BUSY;
- }
- else if((htim->State == HAL_TIM_STATE_READY))
- {
- if(((uint32_t)pData == 0 ) && (Length > 0))
- {
- return HAL_ERROR;
- }
- else
- {
- htim->State = HAL_TIM_STATE_BUSY;
- }
- }
- /* Enable the Input Capture channels 1
- (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_ENABLE);
-
- /* Set the DMA Input Capture 1 Callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMACaptureCplt;
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream for Capture 1*/
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)&htim->Instance->CCR1, (uint32_t)pData, Length);
-
- /* Enable the capture compare 1 Interrupt */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Hall Sensor Interface in DMA mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef *htim)
-{
- /* Check the parameters */
- assert_param(IS_TIM_XOR_INSTANCE(htim->Instance));
-
- /* Disable the Input Capture channels 1
- (in the Hall Sensor Interface the Three possible channels that can be used are TIM_CHANNEL_1, TIM_CHANNEL_2 and TIM_CHANNEL_3) */
- TIM_CCxChannelCmd(htim->Instance, TIM_CHANNEL_1, TIM_CCx_DISABLE);
-
-
- /* Disable the capture compare Interrupts 1 event */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-/**
- * @}
- */
-
-/** @defgroup TIMEx_Exported_Functions_Group2 Timer Complementary Output Compare functions
- * @brief Timer Complementary Output Compare functions
- *
-@verbatim
- ==============================================================================
- ##### Timer Complementary Output Compare functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Start the Complementary Output Compare/PWM.
- (+) Stop the Complementary Output Compare/PWM.
- (+) Start the Complementary Output Compare/PWM and enable interrupts.
- (+) Stop the Complementary Output Compare/PWM and disable interrupts.
- (+) Start the Complementary Output Compare/PWM and enable DMA transfers.
- (+) Stop the Complementary Output Compare/PWM and disable DMA transfers.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Starts the TIM Output Compare signal generation on the complementary
- * output.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channel to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- /* Enable the Capture compare channel N */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
-
- /* Enable the Main Output */
- __HAL_TIM_MOE_ENABLE(htim);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Output Compare signal generation on the complementary
- * output.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channel to be disabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- /* Disable the Capture compare channel N */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
-
- /* Disable the Main Output */
- __HAL_TIM_MOE_DISABLE(htim);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Output Compare signal generation in interrupt mode
- * on the complementary output.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channel to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Enable the TIM Output Compare interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Enable the TIM Output Compare interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Enable the TIM Output Compare interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Enable the TIM Output Compare interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Enable the TIM Break interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
-
- /* Enable the Capture compare channel N */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
-
- /* Enable the Main Output */
- __HAL_TIM_MOE_ENABLE(htim);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Output Compare signal generation in interrupt mode
- * on the complementary output.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channel to be disabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Disable the TIM Output Compare interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Disable the TIM Output Compare interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Disable the TIM Output Compare interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Disable the TIM Output Compare interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Disable the Capture compare channel N */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
-
- /* Disable the TIM Break interrupt (only if no more channel is active) */
- if((READ_REG(htim->Instance->CCER) & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
- {
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
- }
-
- /* Disable the Main Output */
- __HAL_TIM_MOE_DISABLE(htim);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM Output Compare signal generation in DMA mode
- * on the complementary output.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channel to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @param pData: The source Buffer address.
- * @param Length: The length of data to be transferred from memory to TIM peripheral
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- if((htim->State == HAL_TIM_STATE_BUSY))
- {
- return HAL_BUSY;
- }
- else if((htim->State == HAL_TIM_STATE_READY))
- {
- if(((uint32_t)pData == 0 ) && (Length > 0))
- {
- return HAL_ERROR;
- }
- else
- {
- htim->State = HAL_TIM_STATE_BUSY;
- }
- }
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
-
- /* Enable the TIM Output Compare DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
-
- /* Enable the TIM Output Compare DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
-{
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
-
- /* Enable the TIM Output Compare DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
-
- /* Enable the TIM Output Compare DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Enable the Capture compare channel N */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
-
- /* Enable the Main Output */
- __HAL_TIM_MOE_ENABLE(htim);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM Output Compare signal generation in DMA mode
- * on the complementary output.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channel to be disabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Disable the TIM Output Compare DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Disable the TIM Output Compare DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Disable the TIM Output Compare DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Disable the TIM Output Compare interrupt */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Disable the Capture compare channel N */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
-
- /* Disable the Main Output */
- __HAL_TIM_MOE_DISABLE(htim);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Change the htim state */
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-/**
- * @}
- */
-
-/** @defgroup TIMEx_Exported_Functions_Group3 Timer Complementary PWM functions
- * @brief Timer Complementary PWM functions
- *
-@verbatim
- ==============================================================================
- ##### Timer Complementary PWM functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Start the Complementary PWM.
- (+) Stop the Complementary PWM.
- (+) Start the Complementary PWM and enable interrupts.
- (+) Stop the Complementary PWM and disable interrupts.
- (+) Start the Complementary PWM and enable DMA transfers.
- (+) Stop the Complementary PWM and disable DMA transfers.
- (+) Start the Complementary Input Capture measurement.
- (+) Stop the Complementary Input Capture.
- (+) Start the Complementary Input Capture and enable interrupts.
- (+) Stop the Complementary Input Capture and disable interrupts.
- (+) Start the Complementary Input Capture and enable DMA transfers.
- (+) Stop the Complementary Input Capture and disable DMA transfers.
- (+) Start the Complementary One Pulse generation.
- (+) Stop the Complementary One Pulse.
- (+) Start the Complementary One Pulse and enable interrupts.
- (+) Stop the Complementary One Pulse and disable interrupts.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Starts the PWM signal generation on the complementary output.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channel to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- /* Enable the complementary PWM output */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
-
- /* Enable the Main Output */
- __HAL_TIM_MOE_ENABLE(htim);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the PWM signal generation on the complementary output.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channel to be disabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- /* Disable the complementary PWM output */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
-
- /* Disable the Main Output */
- __HAL_TIM_MOE_DISABLE(htim);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the PWM signal generation in interrupt mode on the
- * complementary output.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channel to be disabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Enable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Enable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Enable the TIM Capture/Compare 3 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Enable the TIM Capture/Compare 4 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Enable the TIM Break interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_BREAK);
-
- /* Enable the complementary PWM output */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
-
- /* Enable the Main Output */
- __HAL_TIM_MOE_ENABLE(htim);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the PWM signal generation in interrupt mode on the
- * complementary output.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channel to be disabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT (TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Disable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Disable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Disable the TIM Capture/Compare 3 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Disable the TIM Capture/Compare 3 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Disable the complementary PWM output */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
-
- /* Disable the TIM Break interrupt (only if no more channel is active) */
- if((READ_REG(htim->Instance->CCER) & (TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) == RESET)
- {
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_BREAK);
- }
-
- /* Disable the Main Output */
- __HAL_TIM_MOE_DISABLE(htim);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM PWM signal generation in DMA mode on the
- * complementary output
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channel to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @param pData: The source Buffer address.
- * @param Length: The length of data to be transferred from memory to TIM peripheral
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- if((htim->State == HAL_TIM_STATE_BUSY))
- {
- return HAL_BUSY;
- }
- else if((htim->State == HAL_TIM_STATE_READY))
- {
- if(((uint32_t)pData == 0 ) && (Length > 0))
- {
- return HAL_ERROR;
- }
- else
- {
- htim->State = HAL_TIM_STATE_BUSY;
- }
- }
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC1]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC1], (uint32_t)pData, (uint32_t)&htim->Instance->CCR1, Length);
-
- /* Enable the TIM Capture/Compare 1 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC2]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC2], (uint32_t)pData, (uint32_t)&htim->Instance->CCR2, Length);
-
- /* Enable the TIM Capture/Compare 2 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC3]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC3], (uint32_t)pData, (uint32_t)&htim->Instance->CCR3,Length);
-
- /* Enable the TIM Capture/Compare 3 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Set the DMA Period elapsed callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferCpltCallback = TIM_DMADelayPulseCplt;
-
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_CC4]->XferErrorCallback = TIM_DMAError ;
-
- /* Enable the DMA Stream */
- HAL_DMA_Start_IT(htim->hdma[TIM_DMA_ID_CC4], (uint32_t)pData, (uint32_t)&htim->Instance->CCR4, Length);
-
- /* Enable the TIM Capture/Compare 4 DMA request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Enable the complementary PWM output */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_ENABLE);
-
- /* Enable the Main Output */
- __HAL_TIM_MOE_ENABLE(htim);
-
- /* Enable the Peripheral */
- __HAL_TIM_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM PWM signal generation in DMA mode on the complementary
- * output
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Channel: TIM Channel to be disabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @arg TIM_CHANNEL_3: TIM Channel 3 selected
- * @arg TIM_CHANNEL_4: TIM Channel 4 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, Channel));
-
- switch (Channel)
- {
- case TIM_CHANNEL_1:
- {
- /* Disable the TIM Capture/Compare 1 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC1);
- }
- break;
-
- case TIM_CHANNEL_2:
- {
- /* Disable the TIM Capture/Compare 2 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC2);
- }
- break;
-
- case TIM_CHANNEL_3:
- {
- /* Disable the TIM Capture/Compare 3 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC3);
- }
- break;
-
- case TIM_CHANNEL_4:
- {
- /* Disable the TIM Capture/Compare 4 DMA request */
- __HAL_TIM_DISABLE_DMA(htim, TIM_DMA_CC4);
- }
- break;
-
- default:
- break;
- }
-
- /* Disable the complementary PWM output */
- TIM_CCxNChannelCmd(htim->Instance, Channel, TIM_CCxN_DISABLE);
-
- /* Disable the Main Output */
- __HAL_TIM_MOE_DISABLE(htim);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Change the htim state */
- htim->State = HAL_TIM_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup TIMEx_Exported_Functions_Group4 Timer Complementary One Pulse functions
- * @brief Timer Complementary One Pulse functions
- *
-@verbatim
- ==============================================================================
- ##### Timer Complementary One Pulse functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Start the Complementary One Pulse generation.
- (+) Stop the Complementary One Pulse.
- (+) Start the Complementary One Pulse and enable interrupts.
- (+) Stop the Complementary One Pulse and disable interrupts.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Starts the TIM One Pulse signal generation on the complementary
- * output.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param OutputChannel: TIM Channel to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
- {
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
-
- /* Enable the complementary One Pulse output */
- TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
-
- /* Enable the Main Output */
- __HAL_TIM_MOE_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Stops the TIM One Pulse signal generation on the complementary
- * output.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param OutputChannel: TIM Channel to be disabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
-{
-
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
-
- /* Disable the complementary One Pulse output */
- TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
-
- /* Disable the Main Output */
- __HAL_TIM_MOE_DISABLE(htim);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the TIM One Pulse signal generation in interrupt mode on the
- * complementary channel.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param OutputChannel: TIM Channel to be enabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
-
- /* Enable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC1);
-
- /* Enable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_CC2);
-
- /* Enable the complementary One Pulse output */
- TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_ENABLE);
-
- /* Enable the Main Output */
- __HAL_TIM_MOE_ENABLE(htim);
-
- /* Return function status */
- return HAL_OK;
- }
-
-/**
- * @brief Stops the TIM One Pulse signal generation in interrupt mode on the
- * complementary channel.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param OutputChannel: TIM Channel to be disabled.
- * This parameter can be one of the following values:
- * @arg TIM_CHANNEL_1: TIM Channel 1 selected
- * @arg TIM_CHANNEL_2: TIM Channel 2 selected
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CCXN_INSTANCE(htim->Instance, OutputChannel));
-
- /* Disable the TIM Capture/Compare 1 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC1);
-
- /* Disable the TIM Capture/Compare 2 interrupt */
- __HAL_TIM_DISABLE_IT(htim, TIM_IT_CC2);
-
- /* Disable the complementary One Pulse output */
- TIM_CCxNChannelCmd(htim->Instance, OutputChannel, TIM_CCxN_DISABLE);
-
- /* Disable the Main Output */
- __HAL_TIM_MOE_DISABLE(htim);
-
- /* Disable the Peripheral */
- __HAL_TIM_DISABLE(htim);
-
- /* Return function status */
- return HAL_OK;
-}
-/**
- * @}
- */
-
-/** @defgroup TIMEx_Exported_Functions_Group5 Peripheral Control functions
- * @brief Peripheral Control functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral Control functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Configure The Input Output channels for OC, PWM, IC or One Pulse mode.
- (+) Configure External Clock source.
- (+) Configure Complementary channels, break features and dead time.
- (+) Configure Master and the Slave synchronization.
- (+) Configure the commutation event in case of use of the Hall sensor interface.
- (+) Configure the DMA Burst Mode.
-
-@endverbatim
- * @{
- */
-/**
- * @brief Configure the TIM commutation event sequence.
- * @note This function is mandatory to use the commutation event in order to
- * update the configuration at each commutation detection on the TRGI input of the Timer,
- * the typical use of this feature is with the use of another Timer(interface Timer)
- * configured in Hall sensor interface, this interface Timer will generate the
- * commutation at its TRGO output (connected to Timer used in this function) each time
- * the TI1 of the Interface Timer detect a commutation at its input TI1.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param InputTrigger: the Internal trigger corresponding to the Timer Interfacing with the Hall sensor.
- * This parameter can be one of the following values:
- * @arg TIM_TS_ITR0: Internal trigger 0 selected
- * @arg TIM_TS_ITR1: Internal trigger 1 selected
- * @arg TIM_TS_ITR2: Internal trigger 2 selected
- * @arg TIM_TS_ITR3: Internal trigger 3 selected
- * @arg TIM_TS_NONE: No trigger is needed
- * @param CommutationSource: the Commutation Event source.
- * This parameter can be one of the following values:
- * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
- * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
-{
- /* Check the parameters */
- assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance));
- assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
-
- __HAL_LOCK(htim);
-
- if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
- (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
- {
- /* Select the Input trigger */
- htim->Instance->SMCR &= ~TIM_SMCR_TS;
- htim->Instance->SMCR |= InputTrigger;
- }
-
- /* Select the Capture Compare preload feature */
- htim->Instance->CR2 |= TIM_CR2_CCPC;
- /* Select the Commutation event source */
- htim->Instance->CR2 &= ~TIM_CR2_CCUS;
- htim->Instance->CR2 |= CommutationSource;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Configure the TIM commutation event sequence with interrupt.
- * @note This function is mandatory to use the commutation event in order to
- * update the configuration at each commutation detection on the TRGI input of the Timer,
- * the typical use of this feature is with the use of another Timer(interface Timer)
- * configured in Hall sensor interface, this interface Timer will generate the
- * commutation at its TRGO output (connected to Timer used in this function) each time
- * the TI1 of the Interface Timer detect a commutation at its input TI1.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param InputTrigger: the Internal trigger corresponding to the Timer Interfacing with the Hall sensor.
- * This parameter can be one of the following values:
- * @arg TIM_TS_ITR0: Internal trigger 0 selected
- * @arg TIM_TS_ITR1: Internal trigger 1 selected
- * @arg TIM_TS_ITR2: Internal trigger 2 selected
- * @arg TIM_TS_ITR3: Internal trigger 3 selected
- * @arg TIM_TS_NONE: No trigger is needed
- * @param CommutationSource: the Commutation Event source.
- * This parameter can be one of the following values:
- * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
- * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
-{
- /* Check the parameters */
- assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance));
- assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
-
- __HAL_LOCK(htim);
-
- if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
- (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
- {
- /* Select the Input trigger */
- htim->Instance->SMCR &= ~TIM_SMCR_TS;
- htim->Instance->SMCR |= InputTrigger;
- }
-
- /* Select the Capture Compare preload feature */
- htim->Instance->CR2 |= TIM_CR2_CCPC;
- /* Select the Commutation event source */
- htim->Instance->CR2 &= ~TIM_CR2_CCUS;
- htim->Instance->CR2 |= CommutationSource;
-
- /* Enable the Commutation Interrupt Request */
- __HAL_TIM_ENABLE_IT(htim, TIM_IT_COM);
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Configure the TIM commutation event sequence with DMA.
- * @note This function is mandatory to use the commutation event in order to
- * update the configuration at each commutation detection on the TRGI input of the Timer,
- * the typical use of this feature is with the use of another Timer(interface Timer)
- * configured in Hall sensor interface, this interface Timer will generate the
- * commutation at its TRGO output (connected to Timer used in this function) each time
- * the TI1 of the Interface Timer detect a commutation at its input TI1.
- * @note: The user should configure the DMA in his own software, in This function only the COMDE bit is set
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param InputTrigger: the Internal trigger corresponding to the Timer Interfacing with the Hall sensor.
- * This parameter can be one of the following values:
- * @arg TIM_TS_ITR0: Internal trigger 0 selected
- * @arg TIM_TS_ITR1: Internal trigger 1 selected
- * @arg TIM_TS_ITR2: Internal trigger 2 selected
- * @arg TIM_TS_ITR3: Internal trigger 3 selected
- * @arg TIM_TS_NONE: No trigger is needed
- * @param CommutationSource: the Commutation Event source.
- * This parameter can be one of the following values:
- * @arg TIM_COMMUTATION_TRGI: Commutation source is the TRGI of the Interface Timer
- * @arg TIM_COMMUTATION_SOFTWARE: Commutation source is set by software using the COMG bit
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef *htim, uint32_t InputTrigger, uint32_t CommutationSource)
-{
- /* Check the parameters */
- assert_param(IS_TIM_ADVANCED_INSTANCE(htim->Instance));
- assert_param(IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(InputTrigger));
-
- __HAL_LOCK(htim);
-
- if ((InputTrigger == TIM_TS_ITR0) || (InputTrigger == TIM_TS_ITR1) ||
- (InputTrigger == TIM_TS_ITR2) || (InputTrigger == TIM_TS_ITR3))
- {
- /* Select the Input trigger */
- htim->Instance->SMCR &= ~TIM_SMCR_TS;
- htim->Instance->SMCR |= InputTrigger;
- }
-
- /* Select the Capture Compare preload feature */
- htim->Instance->CR2 |= TIM_CR2_CCPC;
- /* Select the Commutation event source */
- htim->Instance->CR2 &= ~TIM_CR2_CCUS;
- htim->Instance->CR2 |= CommutationSource;
-
- /* Enable the Commutation DMA Request */
- /* Set the DMA Commutation Callback */
- htim->hdma[TIM_DMA_ID_COMMUTATION]->XferCpltCallback = TIMEx_DMACommutationCplt;
- /* Set the DMA error callback */
- htim->hdma[TIM_DMA_ID_COMMUTATION]->XferErrorCallback = TIM_DMAError;
-
- /* Enable the Commutation DMA Request */
- __HAL_TIM_ENABLE_DMA(htim, TIM_DMA_COM);
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Configures the TIM in master mode.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param sMasterConfig: pointer to a TIM_MasterConfigTypeDef structure that
- * contains the selected trigger output (TRGO) and the Master/Slave
- * mode.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef *htim, TIM_MasterConfigTypeDef * sMasterConfig)
-{
- /* Check the parameters */
- assert_param(IS_TIM_MASTER_INSTANCE(htim->Instance));
- assert_param(IS_TIM_TRGO_SOURCE(sMasterConfig->MasterOutputTrigger));
- assert_param(IS_TIM_MSM_STATE(sMasterConfig->MasterSlaveMode));
-
- __HAL_LOCK(htim);
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Reset the MMS Bits */
- htim->Instance->CR2 &= ~TIM_CR2_MMS;
- /* Select the TRGO source */
- htim->Instance->CR2 |= sMasterConfig->MasterOutputTrigger;
-
- /* Reset the MSM Bit */
- htim->Instance->SMCR &= ~TIM_SMCR_MSM;
- /* Set or Reset the MSM Bit */
- htim->Instance->SMCR |= sMasterConfig->MasterSlaveMode;
-
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Configures the Break feature, dead time, Lock level, OSSI/OSSR State
- * and the AOE(automatic output enable).
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param sBreakDeadTimeConfig: pointer to a TIM_ConfigBreakDeadConfig_TypeDef structure that
- * contains the BDTR Register configuration information for the TIM peripheral.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef *htim,
- TIM_BreakDeadTimeConfigTypeDef * sBreakDeadTimeConfig)
-{
- /* Check the parameters */
- assert_param(IS_TIM_CC4_INSTANCE(htim->Instance));
- assert_param(IS_TIM_OSSR_STATE(sBreakDeadTimeConfig->OffStateRunMode));
- assert_param(IS_TIM_OSSI_STATE(sBreakDeadTimeConfig->OffStateIDLEMode));
- assert_param(IS_TIM_LOCK_LEVEL(sBreakDeadTimeConfig->LockLevel));
- assert_param(IS_TIM_BREAK_STATE(sBreakDeadTimeConfig->BreakState));
- assert_param(IS_TIM_BREAK_POLARITY(sBreakDeadTimeConfig->BreakPolarity));
- assert_param(IS_TIM_AUTOMATIC_OUTPUT_STATE(sBreakDeadTimeConfig->AutomaticOutput));
- assert_param(IS_TIM_DEADTIME(sBreakDeadTimeConfig->DeadTime));
-
- /* Process Locked */
- __HAL_LOCK(htim);
-
- htim->State = HAL_TIM_STATE_BUSY;
-
- /* Set the Lock level, the Break enable Bit and the Polarity, the OSSR State,
- the OSSI State, the dead time value and the Automatic Output Enable Bit */
- htim->Instance->BDTR = (uint32_t)sBreakDeadTimeConfig->OffStateRunMode |
- sBreakDeadTimeConfig->OffStateIDLEMode |
- sBreakDeadTimeConfig->LockLevel |
- sBreakDeadTimeConfig->DeadTime |
- sBreakDeadTimeConfig->BreakState |
- sBreakDeadTimeConfig->BreakPolarity |
- sBreakDeadTimeConfig->AutomaticOutput;
-
-
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-
-/**
- * @brief Configures the TIM2, TIM5 and TIM11 Remapping input capabilities.
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @param Remap: specifies the TIM input remapping source.
- * This parameter can be one of the following values:
- * @arg TIM_TIM2_TIM8_TRGO: TIM2 ITR1 input is connected to TIM8 Trigger output(default)
- * @arg TIM_TIM2_ETH_PTP: TIM2 ITR1 input is connected to ETH PTP trigger output.
- * @arg TIM_TIM2_USBFS_SOF: TIM2 ITR1 input is connected to USB FS SOF.
- * @arg TIM_TIM2_USBHS_SOF: TIM2 ITR1 input is connected to USB HS SOF.
- * @arg TIM_TIM5_GPIO: TIM5 CH4 input is connected to dedicated Timer pin(default)
- * @arg TIM_TIM5_LSI: TIM5 CH4 input is connected to LSI clock.
- * @arg TIM_TIM5_LSE: TIM5 CH4 input is connected to LSE clock.
- * @arg TIM_TIM5_RTC: TIM5 CH4 input is connected to RTC Output event.
- * @arg TIM_TIM11_GPIO: TIM11 CH4 input is connected to dedicated Timer pin(default)
- * @arg TIM_TIM11_HSE: TIM11 CH4 input is connected to HSE_RTC clock
- * (HSE divided by a programmable prescaler)
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef *htim, uint32_t Remap)
-{
- __HAL_LOCK(htim);
-
- /* Check parameters */
- assert_param(IS_TIM_REMAP_INSTANCE(htim->Instance));
- assert_param(IS_TIM_REMAP(Remap));
-
- /* Set the Timer remapping configuration */
- htim->Instance->OR = Remap;
-
- htim->State = HAL_TIM_STATE_READY;
-
- __HAL_UNLOCK(htim);
-
- return HAL_OK;
-}
-/**
- * @}
- */
-
-/** @defgroup TIMEx_Exported_Functions_Group6 Extension Callbacks functions
- * @brief Extension Callbacks functions
- *
-@verbatim
- ==============================================================================
- ##### Extension Callbacks functions #####
- ==============================================================================
- [..]
- This section provides Extension TIM callback functions:
- (+) Timer Commutation callback
- (+) Timer Break callback
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Hall commutation changed callback in non blocking mode
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIMEx_CommutationCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Hall Break detection callback in non blocking mode
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval None
- */
-__weak void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef *htim)
-{
- /* NOTE : This function Should not be modified, when the callback is needed,
- the HAL_TIMEx_BreakCallback could be implemented in the user file
- */
-}
-/**
- * @}
- */
-
-/** @defgroup TIMEx_Exported_Functions_Group7 Extension Peripheral State functions
- * @brief Extension Peripheral State functions
- *
-@verbatim
- ==============================================================================
- ##### Extension Peripheral State functions #####
- ==============================================================================
- [..]
- This subsection permits to get in run-time the status of the peripheral
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Return the TIM Hall Sensor interface state
- * @param htim: pointer to a TIM_HandleTypeDef structure that contains
- * the configuration information for TIM module.
- * @retval HAL state
- */
-HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef *htim)
-{
- return htim->State;
-}
-
-/**
- * @}
- */
-
-/**
- * @brief TIM DMA Commutation callback.
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma)
-{
- TIM_HandleTypeDef* htim = ( TIM_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- htim->State= HAL_TIM_STATE_READY;
-
- HAL_TIMEx_CommutationCallback(htim);
-}
-/**
- * @}
- */
-
-/**
- * @brief Enables or disables the TIM Capture Compare Channel xN.
- * @param TIMx to select the TIM peripheral
- * @param Channel: specifies the TIM Channel
- * This parameter can be one of the following values:
- * @arg TIM_Channel_1: TIM Channel 1
- * @arg TIM_Channel_2: TIM Channel 2
- * @arg TIM_Channel_3: TIM Channel 3
- * @param ChannelNState: specifies the TIM Channel CCxNE bit new state.
- * This parameter can be: TIM_CCxN_ENABLE or TIM_CCxN_Disable.
- * @retval None
- */
-static void TIM_CCxNChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelNState)
-{
- uint32_t tmp = 0;
-
- /* Check the parameters */
- assert_param(IS_TIM_CC4_INSTANCE(TIMx));
- assert_param(IS_TIM_COMPLEMENTARY_CHANNELS(Channel));
-
- tmp = TIM_CCER_CC1NE << Channel;
-
- /* Reset the CCxNE Bit */
- TIMx->CCER &= ~tmp;
-
- /* Set or reset the CCxNE Bit */
- TIMx->CCER |= (uint32_t)(ChannelNState << Channel);
-}
-
-/**
- * @}
- */
-
-#endif /* HAL_TIM_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c
deleted file mode 100644
index 5fc90fc..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_uart.c
+++ /dev/null
@@ -1,1932 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_uart.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief UART HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Universal Asynchronous Receiver Transmitter (UART) peripheral:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral Control functions
- * + Peripheral State and Errors functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- The UART HAL driver can be used as follows:
-
- (#) Declare a UART_HandleTypeDef handle structure.
-
- (#) Initialize the UART low level resources by implementing the HAL_UART_MspInit() API:
- (##) Enable the USARTx interface clock.
- (##) UART pins configuration:
- (+++) Enable the clock for the UART GPIOs.
- (+++) Configure these UART pins as alternate function pull-up.
- (##) NVIC configuration if you need to use interrupt process (HAL_UART_Transmit_IT()
- and HAL_UART_Receive_IT() APIs):
- (+++) Configure the USARTx interrupt priority.
- (+++) Enable the NVIC USART IRQ handle.
- (##) DMA Configuration if you need to use DMA process (HAL_UART_Transmit_DMA()
- and HAL_UART_Receive_DMA() APIs):
- (+++) Declare a DMA handle structure for the Tx/Rx stream.
- (+++) Enable the DMAx interface clock.
- (+++) Configure the declared DMA handle structure with the required
- Tx/Rx parameters.
- (+++) Configure the DMA Tx/Rx Stream.
- (+++) Associate the initialized DMA handle to the UART DMA Tx/Rx handle.
- (+++) Configure the priority and enable the NVIC for the transfer complete
- interrupt on the DMA Tx/Rx Stream.
-
- (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware
- flow control and Mode(Receiver/Transmitter) in the Init structure.
-
- (#) For the UART asynchronous mode, initialize the UART registers by calling
- the HAL_UART_Init() API.
-
- (#) For the UART Half duplex mode, initialize the UART registers by calling
- the HAL_HalfDuplex_Init() API.
-
- (#) For the LIN mode, initialize the UART registers by calling the HAL_LIN_Init() API.
-
- (#) For the Multi-Processor mode, initialize the UART registers by calling
- the HAL_MultiProcessor_Init() API.
-
- [..]
- (@) The specific UART interrupts (Transmission complete interrupt,
- RXNE interrupt and Error Interrupts) will be managed using the macros
- __HAL_UART_ENABLE_IT() and __HAL_UART_DISABLE_IT() inside the transmit
- and receive process.
-
- [..]
- (@) These APIs (HAL_UART_Init() and HAL_HalfDuplex_Init()) configure also the
- low level Hardware GPIO, CLOCK, CORTEX...etc) by calling the customized
- HAL_UART_MspInit() API.
-
- [..]
- Three operation modes are available within this driver :
-
- *** Polling mode IO operation ***
- =================================
- [..]
- (+) Send an amount of data in blocking mode using HAL_UART_Transmit()
- (+) Receive an amount of data in blocking mode using HAL_UART_Receive()
-
- *** Interrupt mode IO operation ***
- ===================================
- [..]
- (+) Send an amount of data in non blocking mode using HAL_UART_Transmit_IT()
- (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_UART_TxCpltCallback
- (+) Receive an amount of data in non blocking mode using HAL_UART_Receive_IT()
- (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_UART_RxCpltCallback
- (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_UART_ErrorCallback
-
- *** DMA mode IO operation ***
- ==============================
- [..]
- (+) Send an amount of data in non blocking mode (DMA) using HAL_UART_Transmit_DMA()
- (+) At transmission end of half transfer HAL_UART_TxHalfCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_UART_TxHalfCpltCallback
- (+) At transmission end of transfer HAL_UART_TxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_UART_TxCpltCallback
- (+) Receive an amount of data in non blocking mode (DMA) using HAL_UART_Receive_DMA()
- (+) At reception end of half transfer HAL_UART_RxHalfCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_UART_RxHalfCpltCallback
- (+) At reception end of transfer HAL_UART_RxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_UART_RxCpltCallback
- (+) In case of transfer Error, HAL_UART_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_UART_ErrorCallback
- (+) Pause the DMA Transfer using HAL_UART_DMAPause()
- (+) Resume the DMA Transfer using HAL_UART_DMAResume()
- (+) Stop the DMA Transfer using HAL_UART_DMAStop()
-
- *** UART HAL driver macros list ***
- =============================================
- [..]
- Below the list of most used macros in UART HAL driver.
-
- (+) __HAL_UART_ENABLE: Enable the UART peripheral
- (+) __HAL_UART_DISABLE: Disable the UART peripheral
- (+) __HAL_UART_GET_FLAG : Check whether the specified UART flag is set or not
- (+) __HAL_UART_CLEAR_FLAG : Clear the specified UART pending flag
- (+) __HAL_UART_ENABLE_IT: Enable the specified UART interrupt
- (+) __HAL_UART_DISABLE_IT: Disable the specified UART interrupt
- (+) __HAL_UART_GET_IT_SOURCE: Check whether the specified UART interrupt has occurred or not
-
- [..]
- (@) You can refer to the UART HAL driver header file for more useful macros
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup UART UART
- * @brief HAL UART module driver
- * @{
- */
-#ifdef HAL_UART_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @addtogroup UART_Private_Constants
- * @{
- */
-#define UART_TIMEOUT_VALUE 22000
-/**
- * @}
- */
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/** @addtogroup UART_Private_Functions UART Private Functions
- * @{
- */
-static void UART_SetConfig (UART_HandleTypeDef *huart);
-static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart);
-static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart);
-static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart);
-static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma);
-static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
-static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
-static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
-static void UART_DMAError(DMA_HandleTypeDef *hdma);
-static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
-/**
- * @}
- */
-
-/* Exported functions ---------------------------------------------------------*/
-/** @defgroup UART_Exported_Functions UART Exported Functions
- * @{
- */
-
-/** @defgroup UART_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
-===============================================================================
- ##### Initialization and Configuration functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to initialize the USARTx or the UARTy
- in asynchronous mode.
- (+) For the asynchronous mode only these parameters can be configured:
- (++) Baud Rate
- (++) Word Length
- (++) Stop Bit
- (++) Parity: If the parity is enabled, then the MSB bit of the data written
- in the data register is transmitted but is changed by the parity bit.
- Depending on the frame length defined by the M bit (8-bits or 9-bits),
- please refer to Reference manual for possible UART frame formats.
- (++) Hardware flow control
- (++) Receiver/transmitter modes
- (++) Over Sampling Method
- [..]
- The HAL_UART_Init(), HAL_HalfDuplex_Init(), HAL_LIN_Init() and HAL_MultiProcessor_Init() APIs
- follow respectively the UART asynchronous, UART Half duplex, LIN and Multi-Processor
- configuration procedures (details for the procedures are available in reference manual (RM0329)).
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the UART mode according to the specified parameters in
- * the UART_InitTypeDef and create the associated handle.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart)
-{
- /* Check the UART handle allocation */
- if(huart == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- if(huart->Init.HwFlowCtl != UART_HWCONTROL_NONE)
- {
- /* The hardware flow control is available only for USART1, USART2, USART3 and USART6 */
- assert_param(IS_UART_HWFLOW_INSTANCE(huart->Instance));
- assert_param(IS_UART_HARDWARE_FLOW_CONTROL(huart->Init.HwFlowCtl));
- }
- else
- {
- assert_param(IS_UART_INSTANCE(huart->Instance));
- }
- assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength));
- assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling));
-
- if(huart->State == HAL_UART_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- huart->Lock = HAL_UNLOCKED;
- /* Init the low level hardware */
- HAL_UART_MspInit(huart);
- }
-
- huart->State = HAL_UART_STATE_BUSY;
-
- /* Disable the peripheral */
- __HAL_UART_DISABLE(huart);
-
- /* Set the UART Communication parameters */
- UART_SetConfig(huart);
-
- /* In asynchronous mode, the following bits must be kept cleared:
- - LINEN and CLKEN bits in the USART_CR2 register,
- - SCEN, HDSEL and IREN bits in the USART_CR3 register.*/
- huart->Instance->CR2 &= ~(USART_CR2_LINEN | USART_CR2_CLKEN);
- huart->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN);
-
- /* Enable the peripheral */
- __HAL_UART_ENABLE(huart);
-
- /* Initialize the UART state */
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- huart->State= HAL_UART_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the half-duplex mode according to the specified
- * parameters in the UART_InitTypeDef and create the associated handle.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart)
-{
- /* Check the UART handle allocation */
- if(huart == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_UART_INSTANCE(huart->Instance));
- assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength));
- assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling));
-
- if(huart->State == HAL_UART_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- huart->Lock = HAL_UNLOCKED;
- /* Init the low level hardware */
- HAL_UART_MspInit(huart);
- }
-
- huart->State = HAL_UART_STATE_BUSY;
-
- /* Disable the peripheral */
- __HAL_UART_DISABLE(huart);
-
- /* Set the UART Communication parameters */
- UART_SetConfig(huart);
-
- /* In half-duplex mode, the following bits must be kept cleared:
- - LINEN and CLKEN bits in the USART_CR2 register,
- - SCEN and IREN bits in the USART_CR3 register.*/
- huart->Instance->CR2 &= ~(USART_CR2_LINEN | USART_CR2_CLKEN);
- huart->Instance->CR3 &= ~(USART_CR3_IREN | USART_CR3_SCEN);
-
- /* Enable the Half-Duplex mode by setting the HDSEL bit in the CR3 register */
- huart->Instance->CR3 |= USART_CR3_HDSEL;
-
- /* Enable the peripheral */
- __HAL_UART_ENABLE(huart);
-
- /* Initialize the UART state*/
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- huart->State= HAL_UART_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the LIN mode according to the specified
- * parameters in the UART_InitTypeDef and create the associated handle.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @param BreakDetectLength: Specifies the LIN break detection length.
- * This parameter can be one of the following values:
- * @arg UART_LINBREAKDETECTLENGTH_10B: 10-bit break detection
- * @arg UART_LINBREAKDETECTLENGTH_11B: 11-bit break detection
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength)
-{
- /* Check the UART handle allocation */
- if(huart == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_UART_INSTANCE(huart->Instance));
- assert_param(IS_UART_LIN_BREAK_DETECT_LENGTH(BreakDetectLength));
- assert_param(IS_UART_LIN_WORD_LENGTH(huart->Init.WordLength));
- assert_param(IS_UART_LIN_OVERSAMPLING(huart->Init.OverSampling));
-
- if(huart->State == HAL_UART_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- huart->Lock = HAL_UNLOCKED;
- /* Init the low level hardware */
- HAL_UART_MspInit(huart);
- }
-
- huart->State = HAL_UART_STATE_BUSY;
-
- /* Disable the peripheral */
- __HAL_UART_DISABLE(huart);
-
- /* Set the UART Communication parameters */
- UART_SetConfig(huart);
-
- /* In LIN mode, the following bits must be kept cleared:
- - LINEN and CLKEN bits in the USART_CR2 register,
- - SCEN and IREN bits in the USART_CR3 register.*/
- huart->Instance->CR2 &= ~(USART_CR2_CLKEN);
- huart->Instance->CR3 &= ~(USART_CR3_HDSEL | USART_CR3_IREN | USART_CR3_SCEN);
-
- /* Enable the LIN mode by setting the LINEN bit in the CR2 register */
- huart->Instance->CR2 |= USART_CR2_LINEN;
-
- /* Set the USART LIN Break detection length. */
- huart->Instance->CR2 &= ~(USART_CR2_LBDL);
- huart->Instance->CR2 |= BreakDetectLength;
-
- /* Enable the peripheral */
- __HAL_UART_ENABLE(huart);
-
- /* Initialize the UART state*/
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- huart->State= HAL_UART_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the Multi-Processor mode according to the specified
- * parameters in the UART_InitTypeDef and create the associated handle.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @param Address: USART address
- * @param WakeUpMethod: specifies the USART wake-up method.
- * This parameter can be one of the following values:
- * @arg UART_WAKEUPMETHOD_IDLELINE: Wake-up by an idle line detection
- * @arg UART_WAKEUPMETHOD_ADDRESSMARK: Wake-up by an address mark
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod)
-{
- /* Check the UART handle allocation */
- if(huart == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_UART_INSTANCE(huart->Instance));
- assert_param(IS_UART_WAKEUPMETHOD(WakeUpMethod));
- assert_param(IS_UART_ADDRESS(Address));
- assert_param(IS_UART_WORD_LENGTH(huart->Init.WordLength));
- assert_param(IS_UART_OVERSAMPLING(huart->Init.OverSampling));
-
- if(huart->State == HAL_UART_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- huart->Lock = HAL_UNLOCKED;
- /* Init the low level hardware */
- HAL_UART_MspInit(huart);
- }
-
- huart->State = HAL_UART_STATE_BUSY;
-
- /* Disable the peripheral */
- __HAL_UART_DISABLE(huart);
-
- /* Set the UART Communication parameters */
- UART_SetConfig(huart);
-
- /* In Multi-Processor mode, the following bits must be kept cleared:
- - LINEN and CLKEN bits in the USART_CR2 register,
- - SCEN, HDSEL and IREN bits in the USART_CR3 register */
- huart->Instance->CR2 &= ~(USART_CR2_LINEN | USART_CR2_CLKEN);
- huart->Instance->CR3 &= ~(USART_CR3_SCEN | USART_CR3_HDSEL | USART_CR3_IREN);
-
- /* Clear the USART address */
- huart->Instance->CR2 &= ~(USART_CR2_ADD);
- /* Set the USART address node */
- huart->Instance->CR2 |= Address;
-
- /* Set the wake up method by setting the WAKE bit in the CR1 register */
- huart->Instance->CR1 &= ~(USART_CR1_WAKE);
- huart->Instance->CR1 |= WakeUpMethod;
-
- /* Enable the peripheral */
- __HAL_UART_ENABLE(huart);
-
- /* Initialize the UART state */
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- huart->State= HAL_UART_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the UART peripheral.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_DeInit(UART_HandleTypeDef *huart)
-{
- /* Check the UART handle allocation */
- if(huart == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_UART_INSTANCE(huart->Instance));
-
- huart->State = HAL_UART_STATE_BUSY;
-
- /* DeInit the low level hardware */
- HAL_UART_MspDeInit(huart);
-
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- huart->State = HAL_UART_STATE_RESET;
-
- /* Process Lock */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
-}
-
-/**
- * @brief UART MSP Init.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval None
- */
- __weak void HAL_UART_MspInit(UART_HandleTypeDef *huart)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_UART_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief UART MSP DeInit.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval None
- */
- __weak void HAL_UART_MspDeInit(UART_HandleTypeDef *huart)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_UART_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup UART_Exported_Functions_Group2 IO operation functions
- * @brief UART Transmit and Receive functions
- *
-@verbatim
- ==============================================================================
- ##### IO operation functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to manage the UART asynchronous
- and Half duplex data transfers.
-
- (#) There are two modes of transfer:
- (++) Blocking mode: The communication is performed in polling mode.
- The HAL status of all data processing is returned by the same function
- after finishing transfer.
- (++) Non blocking mode: The communication is performed using Interrupts
- or DMA, these APIs return the HAL status.
- The end of the data processing will be indicated through the
- dedicated UART IRQ when using Interrupt mode or the DMA IRQ when
- using DMA mode.
- The HAL_UART_TxCpltCallback(), HAL_UART_RxCpltCallback() user callbacks
- will be executed respectively at the end of the transmit or receive process.
- The HAL_UART_ErrorCallback() user callback will be executed when
- a communication error is detected.
-
- (#) Blocking mode APIs are:
- (++) HAL_UART_Transmit()
- (++) HAL_UART_Receive()
-
- (#) Non Blocking mode APIs with Interrupt are:
- (++) HAL_UART_Transmit_IT()
- (++) HAL_UART_Receive_IT()
- (++) HAL_UART_IRQHandler()
-
- (#) Non Blocking mode functions with DMA are:
- (++) HAL_UART_Transmit_DMA()
- (++) HAL_UART_Receive_DMA()
-
- (#) A set of Transfer Complete Callbacks are provided in non blocking mode:
- (++) HAL_UART_TxCpltCallback()
- (++) HAL_UART_RxCpltCallback()
- (++) HAL_UART_ErrorCallback()
-
- [..]
- (@) In the Half duplex communication, it is forbidden to run the transmit
- and receive process in parallel, the UART state HAL_UART_STATE_BUSY_TX_RX
- can't be useful.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Sends an amount of data in blocking mode.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- uint16_t* tmp;
- uint32_t tmp1 = 0;
-
- tmp1 = huart->State;
- if((tmp1 == HAL_UART_STATE_READY) || (tmp1 == HAL_UART_STATE_BUSY_RX))
- {
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- /* Check if a non-blocking receive process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_RX)
- {
- huart->State = HAL_UART_STATE_BUSY_TX_RX;
- }
- else
- {
- huart->State = HAL_UART_STATE_BUSY_TX;
- }
-
- huart->TxXferSize = Size;
- huart->TxXferCount = Size;
- while(huart->TxXferCount > 0)
- {
- huart->TxXferCount--;
- if(huart->Init.WordLength == UART_WORDLENGTH_9B)
- {
- if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- tmp = (uint16_t*) pData;
- huart->Instance->DR = (*tmp & (uint16_t)0x01FF);
- if(huart->Init.Parity == UART_PARITY_NONE)
- {
- pData +=2;
- }
- else
- {
- pData +=1;
- }
- }
- else
- {
- if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- huart->Instance->DR = (*pData++ & (uint8_t)0xFF);
- }
- }
-
- if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_TC, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Check if a non-blocking receive process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
- {
- huart->State = HAL_UART_STATE_BUSY_RX;
- }
- else
- {
- huart->State = HAL_UART_STATE_READY;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receives an amount of data in blocking mode.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be received
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout)
-{
- uint16_t* tmp;
- uint32_t tmp1 = 0;
-
- tmp1 = huart->State;
- if((tmp1 == HAL_UART_STATE_READY) || (tmp1 == HAL_UART_STATE_BUSY_TX))
- {
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- /* Check if a non-blocking transmit process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_TX)
- {
- huart->State = HAL_UART_STATE_BUSY_TX_RX;
- }
- else
- {
- huart->State = HAL_UART_STATE_BUSY_RX;
- }
-
- huart->RxXferSize = Size;
- huart->RxXferCount = Size;
-
- /* Check the remain data to be received */
- while(huart->RxXferCount > 0)
- {
- huart->RxXferCount--;
- if(huart->Init.WordLength == UART_WORDLENGTH_9B)
- {
- if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- tmp = (uint16_t*) pData ;
- if(huart->Init.Parity == UART_PARITY_NONE)
- {
- *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FF);
- pData +=2;
- }
- else
- {
- *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x00FF);
- pData +=1;
- }
-
- }
- else
- {
- if(UART_WaitOnFlagUntilTimeout(huart, UART_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- if(huart->Init.Parity == UART_PARITY_NONE)
- {
- *pData++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF);
- }
- else
- {
- *pData++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F);
- }
-
- }
- }
-
- /* Check if a non-blocking transmit process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
- {
- huart->State = HAL_UART_STATE_BUSY_TX;
- }
- else
- {
- huart->State = HAL_UART_STATE_READY;
- }
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Sends an amount of data in non blocking mode.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
-{
- uint32_t tmp = 0;
-
- tmp = huart->State;
- if((tmp == HAL_UART_STATE_READY) || (tmp == HAL_UART_STATE_BUSY_RX))
- {
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->pTxBuffPtr = pData;
- huart->TxXferSize = Size;
- huart->TxXferCount = Size;
-
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- /* Check if a receive process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_RX)
- {
- huart->State = HAL_UART_STATE_BUSY_TX_RX;
- }
- else
- {
- huart->State = HAL_UART_STATE_BUSY_TX;
- }
-
- /* Enable the UART Parity Error Interrupt */
- __HAL_UART_ENABLE_IT(huart, UART_IT_PE);
-
- /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
- __HAL_UART_ENABLE_IT(huart, UART_IT_ERR);
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- /* Enable the UART Transmit data register empty Interrupt */
- __HAL_UART_ENABLE_IT(huart, UART_IT_TXE);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receives an amount of data in non blocking mode
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be received
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
-{
- uint32_t tmp = 0;
-
- tmp = huart->State;
- if((tmp == HAL_UART_STATE_READY) || (tmp == HAL_UART_STATE_BUSY_TX))
- {
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->pRxBuffPtr = pData;
- huart->RxXferSize = Size;
- huart->RxXferCount = Size;
-
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- /* Check if a transmit process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_TX)
- {
- huart->State = HAL_UART_STATE_BUSY_TX_RX;
- }
- else
- {
- huart->State = HAL_UART_STATE_BUSY_RX;
- }
-
- /* Enable the UART Parity Error Interrupt */
- __HAL_UART_ENABLE_IT(huart, UART_IT_PE);
-
- /* Enable the UART Error Interrupt: (Frame error, noise error, overrun error) */
- __HAL_UART_ENABLE_IT(huart, UART_IT_ERR);
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- /* Enable the UART Data Register not empty Interrupt */
- __HAL_UART_ENABLE_IT(huart, UART_IT_RXNE);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Sends an amount of data in non blocking mode.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
-{
- uint32_t *tmp;
- uint32_t tmp1 = 0;
-
- tmp1 = huart->State;
- if((tmp1 == HAL_UART_STATE_READY) || (tmp1 == HAL_UART_STATE_BUSY_RX))
- {
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->pTxBuffPtr = pData;
- huart->TxXferSize = Size;
- huart->TxXferCount = Size;
-
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- /* Check if a receive process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_RX)
- {
- huart->State = HAL_UART_STATE_BUSY_TX_RX;
- }
- else
- {
- huart->State = HAL_UART_STATE_BUSY_TX;
- }
-
- /* Set the UART DMA transfer complete callback */
- huart->hdmatx->XferCpltCallback = UART_DMATransmitCplt;
-
- /* Set the UART DMA Half transfer complete callback */
- huart->hdmatx->XferHalfCpltCallback = UART_DMATxHalfCplt;
-
- /* Set the DMA error callback */
- huart->hdmatx->XferErrorCallback = UART_DMAError;
-
- /* Enable the UART transmit DMA Stream */
- tmp = (uint32_t*)&pData;
- HAL_DMA_Start_IT(huart->hdmatx, *(uint32_t*)tmp, (uint32_t)&huart->Instance->DR, Size);
-
- /* Clear the TC flag in the SR register by writing 0 to it */
- __HAL_UART_CLEAR_FLAG(huart, UART_FLAG_TC);
-
- /* Enable the DMA transfer for transmit request by setting the DMAT bit
- in the UART CR3 register */
- huart->Instance->CR3 |= USART_CR3_DMAT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Receives an amount of data in non blocking mode.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @param pData: Pointer to data buffer
- * @param Size: Amount of data to be received
- * @note When the UART parity is enabled (PCE = 1) the data received contain the parity bit.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size)
-{
- uint32_t *tmp;
- uint32_t tmp1 = 0;
-
- tmp1 = huart->State;
- if((tmp1 == HAL_UART_STATE_READY) || (tmp1 == HAL_UART_STATE_BUSY_TX))
- {
- if((pData == NULL ) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->pRxBuffPtr = pData;
- huart->RxXferSize = Size;
-
- huart->ErrorCode = HAL_UART_ERROR_NONE;
- /* Check if a transmit process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_TX)
- {
- huart->State = HAL_UART_STATE_BUSY_TX_RX;
- }
- else
- {
- huart->State = HAL_UART_STATE_BUSY_RX;
- }
-
- /* Set the UART DMA transfer complete callback */
- huart->hdmarx->XferCpltCallback = UART_DMAReceiveCplt;
-
- /* Set the UART DMA Half transfer complete callback */
- huart->hdmarx->XferHalfCpltCallback = UART_DMARxHalfCplt;
-
- /* Set the DMA error callback */
- huart->hdmarx->XferErrorCallback = UART_DMAError;
-
- /* Enable the DMA Stream */
- tmp = (uint32_t*)&pData;
- HAL_DMA_Start_IT(huart->hdmarx, (uint32_t)&huart->Instance->DR, *(uint32_t*)tmp, Size);
-
- /* Enable the DMA transfer for the receiver request by setting the DMAR bit
- in the UART CR3 register */
- huart->Instance->CR3 |= USART_CR3_DMAR;
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Pauses the DMA Transfer.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart)
-{
- /* Process Locked */
- __HAL_LOCK(huart);
-
- if(huart->State == HAL_UART_STATE_BUSY_TX)
- {
- /* Disable the UART DMA Tx request */
- huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
- }
- else if(huart->State == HAL_UART_STATE_BUSY_RX)
- {
- /* Disable the UART DMA Rx request */
- huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
- }
- else if (huart->State == HAL_UART_STATE_BUSY_TX_RX)
- {
- /* Disable the UART DMA Tx & Rx requests */
- huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
- huart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAR);
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
-}
-
-/**
- * @brief Resumes the DMA Transfer.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart)
-{
- /* Process Locked */
- __HAL_LOCK(huart);
-
- if(huart->State == HAL_UART_STATE_BUSY_TX)
- {
- /* Enable the UART DMA Tx request */
- huart->Instance->CR3 |= USART_CR3_DMAT;
- }
- else if(huart->State == HAL_UART_STATE_BUSY_RX)
- {
- /* Clear the Overrun flag before resuming the Rx transfer*/
- __HAL_UART_CLEAR_OREFLAG(huart);
- /* Enable the UART DMA Rx request */
- huart->Instance->CR3 |= USART_CR3_DMAR;
- }
- else if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
- {
- /* Clear the Overrun flag before resuming the Rx transfer*/
- __HAL_UART_CLEAR_OREFLAG(huart);
- /* Enable the UART DMA Tx & Rx request */
- huart->Instance->CR3 |= USART_CR3_DMAT;
- huart->Instance->CR3 |= USART_CR3_DMAR;
- }
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
-}
-
-/**
- * @brief Stops the DMA Transfer.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart)
-{
- /* The Lock is not implemented on this API to allow the user application
- to call the HAL UART API under callbacks HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback():
- when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
- and the correspond call back is executed HAL_UART_TxCpltCallback() / HAL_UART_RxCpltCallback()
- */
-
- /* Disable the UART Tx/Rx DMA requests */
- huart->Instance->CR3 &= ~USART_CR3_DMAT;
- huart->Instance->CR3 &= ~USART_CR3_DMAR;
-
- /* Abort the UART DMA tx Stream */
- if(huart->hdmatx != NULL)
- {
- HAL_DMA_Abort(huart->hdmatx);
- }
- /* Abort the UART DMA rx Stream */
- if(huart->hdmarx != NULL)
- {
- HAL_DMA_Abort(huart->hdmarx);
- }
-
- huart->State = HAL_UART_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief This function handles UART interrupt request.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval None
- */
-void HAL_UART_IRQHandler(UART_HandleTypeDef *huart)
-{
- uint32_t tmp1 = 0, tmp2 = 0;
-
- tmp1 = __HAL_UART_GET_FLAG(huart, UART_FLAG_PE);
- tmp2 = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_PE);
- /* UART parity error interrupt occurred ------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- __HAL_UART_CLEAR_PEFLAG(huart);
-
- huart->ErrorCode |= HAL_UART_ERROR_PE;
- }
-
- tmp1 = __HAL_UART_GET_FLAG(huart, UART_FLAG_FE);
- tmp2 = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_ERR);
- /* UART frame error interrupt occurred -------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- __HAL_UART_CLEAR_FEFLAG(huart);
-
- huart->ErrorCode |= HAL_UART_ERROR_FE;
- }
-
- tmp1 = __HAL_UART_GET_FLAG(huart, UART_FLAG_NE);
- tmp2 = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_ERR);
- /* UART noise error interrupt occurred -------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- __HAL_UART_CLEAR_NEFLAG(huart);
-
- huart->ErrorCode |= HAL_UART_ERROR_NE;
- }
-
- tmp1 = __HAL_UART_GET_FLAG(huart, UART_FLAG_ORE);
- tmp2 = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_ERR);
- /* UART Over-Run interrupt occurred ----------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- __HAL_UART_CLEAR_OREFLAG(huart);
-
- huart->ErrorCode |= HAL_UART_ERROR_ORE;
- }
-
- tmp1 = __HAL_UART_GET_FLAG(huart, UART_FLAG_RXNE);
- tmp2 = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_RXNE);
- /* UART in mode Receiver ---------------------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- UART_Receive_IT(huart);
- }
-
- tmp1 = __HAL_UART_GET_FLAG(huart, UART_FLAG_TXE);
- tmp2 = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_TXE);
- /* UART in mode Transmitter ------------------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- UART_Transmit_IT(huart);
- }
-
- tmp1 = __HAL_UART_GET_FLAG(huart, UART_FLAG_TC);
- tmp2 = __HAL_UART_GET_IT_SOURCE(huart, UART_IT_TC);
- /* UART in mode Transmitter end --------------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- UART_EndTransmit_IT(huart);
- }
-
- if(huart->ErrorCode != HAL_UART_ERROR_NONE)
- {
- /* Set the UART state ready to be able to start again the process */
- huart->State = HAL_UART_STATE_READY;
-
- HAL_UART_ErrorCallback(huart);
- }
-}
-
-/**
- * @brief Tx Transfer completed callbacks.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval None
- */
- __weak void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_UART_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Tx Half Transfer completed callbacks.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval None
- */
- __weak void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_UART_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Transfer completed callbacks.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval None
- */
-__weak void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_UART_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Half Transfer completed callbacks.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval None
- */
-__weak void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_UART_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief UART error callbacks.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval None
- */
- __weak void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_UART_ErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup UART_Exported_Functions_Group3 Peripheral Control functions
- * @brief UART control functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral Control functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to control the UART:
- (+) HAL_LIN_SendBreak() API can be helpful to transmit the break character.
- (+) HAL_MultiProcessor_EnterMuteMode() API can be helpful to enter the UART in mute mode.
- (+) HAL_MultiProcessor_ExitMuteMode() API can be helpful to exit the UART mute mode by software.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Transmits break characters.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart)
-{
- /* Check the parameters */
- assert_param(IS_UART_INSTANCE(huart->Instance));
-
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->State = HAL_UART_STATE_BUSY;
-
- /* Send break characters */
- huart->Instance->CR1 |= USART_CR1_SBK;
-
- huart->State = HAL_UART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
-}
-
-/**
- * @brief Enters the UART in mute mode.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart)
-{
- /* Check the parameters */
- assert_param(IS_UART_INSTANCE(huart->Instance));
-
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->State = HAL_UART_STATE_BUSY;
-
- /* Enable the USART mute mode by setting the RWU bit in the CR1 register */
- huart->Instance->CR1 |= USART_CR1_RWU;
-
- huart->State = HAL_UART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
-}
-
-/**
- * @brief Exits the UART mute mode: wake up software.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart)
-{
- /* Check the parameters */
- assert_param(IS_UART_INSTANCE(huart->Instance));
-
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->State = HAL_UART_STATE_BUSY;
-
- /* Disable the USART mute mode by clearing the RWU bit in the CR1 register */
- huart->Instance->CR1 &= (uint32_t)~((uint32_t)USART_CR1_RWU);
-
- huart->State = HAL_UART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
-}
-
-/**
- * @brief Enables the UART transmitter and disables the UART receiver.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart)
-{
- uint32_t tmpreg = 0x00;
-
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->State = HAL_UART_STATE_BUSY;
-
- /*-------------------------- USART CR1 Configuration -----------------------*/
- tmpreg = huart->Instance->CR1;
-
- /* Clear TE and RE bits */
- tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE));
-
- /* Enable the USART's transmit interface by setting the TE bit in the USART CR1 register */
- tmpreg |= (uint32_t)USART_CR1_TE;
-
- /* Write to USART CR1 */
- huart->Instance->CR1 = (uint32_t)tmpreg;
-
- huart->State = HAL_UART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
-}
-
-/**
- * @brief Enables the UART receiver and disables the UART transmitter.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart)
-{
- uint32_t tmpreg = 0x00;
-
- /* Process Locked */
- __HAL_LOCK(huart);
-
- huart->State = HAL_UART_STATE_BUSY;
-
- /*-------------------------- USART CR1 Configuration -----------------------*/
- tmpreg = huart->Instance->CR1;
-
- /* Clear TE and RE bits */
- tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE));
-
- /* Enable the USART's receive interface by setting the RE bit in the USART CR1 register */
- tmpreg |= (uint32_t)USART_CR1_RE;
-
- /* Write to USART CR1 */
- huart->Instance->CR1 = (uint32_t)tmpreg;
-
- huart->State = HAL_UART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup UART_Exported_Functions_Group4 Peripheral State and Errors functions
- * @brief UART State and Errors functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral State and Errors functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to return the State of
- UART communication process, return Peripheral Errors occurred during communication
- process
- (+) HAL_UART_GetState() API can be helpful to check in run-time the state of the UART peripheral.
- (+) HAL_UART_GetError() check in run-time errors that could be occurred during communication.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Returns the UART state.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL state
- */
-HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart)
-{
- return huart->State;
-}
-
-/**
-* @brief Return the UART error code
-* @param huart : pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART.
-* @retval UART Error Code
-*/
-uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart)
-{
- return huart->ErrorCode;
-}
-
-/**
- * @}
- */
-
-/**
- * @brief DMA UART transmit process complete callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void UART_DMATransmitCplt(DMA_HandleTypeDef *hdma)
-{
- UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- /* DMA Normal mode*/
- if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
- {
- huart->TxXferCount = 0;
-
- /* Disable the DMA transfer for transmit request by setting the DMAT bit
- in the UART CR3 register */
- huart->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAT);
-
- /* Enable the UART Transmit Complete Interrupt */
- __HAL_UART_ENABLE_IT(huart, UART_IT_TC);
- }
- /* DMA Circular mode */
- else
- {
- HAL_UART_TxCpltCallback(huart);
- }
-}
-
-/**
- * @brief DMA UART transmit process half complete callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void UART_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
-{
- UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- HAL_UART_TxHalfCpltCallback(huart);
-}
-
-/**
- * @brief DMA UART receive process complete callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void UART_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
-{
- UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- /* DMA Normal mode*/
- if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
- {
- huart->RxXferCount = 0;
-
- /* Disable the DMA transfer for the receiver request by setting the DMAR bit
- in the UART CR3 register */
- huart->Instance->CR3 &= (uint32_t)~((uint32_t)USART_CR3_DMAR);
-
- /* Check if a transmit process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
- {
- huart->State = HAL_UART_STATE_BUSY_TX;
- }
- else
- {
- huart->State = HAL_UART_STATE_READY;
- }
- }
- HAL_UART_RxCpltCallback(huart);
-}
-
-/**
- * @brief DMA UART receive process half complete callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void UART_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
-{
- UART_HandleTypeDef* huart = (UART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- HAL_UART_RxHalfCpltCallback(huart);
-}
-
-/**
- * @brief DMA UART communication error callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void UART_DMAError(DMA_HandleTypeDef *hdma)
-{
- UART_HandleTypeDef* huart = ( UART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- huart->RxXferCount = 0;
- huart->TxXferCount = 0;
- huart->State= HAL_UART_STATE_READY;
- huart->ErrorCode |= HAL_UART_ERROR_DMA;
- HAL_UART_ErrorCallback(huart);
-}
-
-/**
- * @brief This function handles UART Communication Timeout.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @param Flag: specifies the UART flag to check.
- * @param Status: The new Flag status (SET or RESET).
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-static HAL_StatusTypeDef UART_WaitOnFlagUntilTimeout(UART_HandleTypeDef *huart, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait until flag is set */
- if(Status == RESET)
- {
- while(__HAL_UART_GET_FLAG(huart, Flag) == RESET)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
- __HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
- __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
- __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
- __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
-
- huart->State= HAL_UART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- else
- {
- while(__HAL_UART_GET_FLAG(huart, Flag) != RESET)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
- __HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
- __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
- __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
- __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
-
- huart->State= HAL_UART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(huart);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief Sends an amount of data in non blocking mode.
- * @param huart: Pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-static HAL_StatusTypeDef UART_Transmit_IT(UART_HandleTypeDef *huart)
-{
- uint16_t* tmp;
- uint32_t tmp1 = 0;
-
- tmp1 = huart->State;
- if((tmp1 == HAL_UART_STATE_BUSY_TX) || (tmp1 == HAL_UART_STATE_BUSY_TX_RX))
- {
- if(huart->Init.WordLength == UART_WORDLENGTH_9B)
- {
- tmp = (uint16_t*) huart->pTxBuffPtr;
- huart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF);
- if(huart->Init.Parity == UART_PARITY_NONE)
- {
- huart->pTxBuffPtr += 2;
- }
- else
- {
- huart->pTxBuffPtr += 1;
- }
- }
- else
- {
- huart->Instance->DR = (uint8_t)(*huart->pTxBuffPtr++ & (uint8_t)0x00FF);
- }
-
- if(--huart->TxXferCount == 0)
- {
- /* Disable the UART Transmit Complete Interrupt */
- __HAL_UART_DISABLE_IT(huart, UART_IT_TXE);
-
- /* Enable the UART Transmit Complete Interrupt */
- __HAL_UART_ENABLE_IT(huart, UART_IT_TC);
- }
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-
-/**
- * @brief Wraps up transmission in non blocking mode.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-static HAL_StatusTypeDef UART_EndTransmit_IT(UART_HandleTypeDef *huart)
-{
- /* Disable the UART Transmit Complete Interrupt */
- __HAL_UART_DISABLE_IT(huart, UART_IT_TC);
-
- /* Check if a receive process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
- {
- huart->State = HAL_UART_STATE_BUSY_RX;
- }
- else
- {
- /* Disable the UART Parity Error Interrupt */
- __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
-
- /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */
- __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
-
- huart->State = HAL_UART_STATE_READY;
- }
-
- HAL_UART_TxCpltCallback(huart);
-
- return HAL_OK;
-}
-
-/**
- * @brief Receives an amount of data in non blocking mode
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval HAL status
- */
-static HAL_StatusTypeDef UART_Receive_IT(UART_HandleTypeDef *huart)
-{
- uint16_t* tmp;
- uint32_t tmp1 = 0;
-
- tmp1 = huart->State;
- if((tmp1 == HAL_UART_STATE_BUSY_RX) || (tmp1 == HAL_UART_STATE_BUSY_TX_RX))
- {
- if(huart->Init.WordLength == UART_WORDLENGTH_9B)
- {
- tmp = (uint16_t*) huart->pRxBuffPtr;
- if(huart->Init.Parity == UART_PARITY_NONE)
- {
- *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x01FF);
- huart->pRxBuffPtr += 2;
- }
- else
- {
- *tmp = (uint16_t)(huart->Instance->DR & (uint16_t)0x00FF);
- huart->pRxBuffPtr += 1;
- }
- }
- else
- {
- if(huart->Init.Parity == UART_PARITY_NONE)
- {
- *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x00FF);
- }
- else
- {
- *huart->pRxBuffPtr++ = (uint8_t)(huart->Instance->DR & (uint8_t)0x007F);
- }
- }
-
- if(--huart->RxXferCount == 0)
- {
- __HAL_UART_DISABLE_IT(huart, UART_IT_RXNE);
-
- /* Check if a transmit process is ongoing or not */
- if(huart->State == HAL_UART_STATE_BUSY_TX_RX)
- {
- huart->State = HAL_UART_STATE_BUSY_TX;
- }
- else
- {
- /* Disable the UART Parity Error Interrupt */
- __HAL_UART_DISABLE_IT(huart, UART_IT_PE);
-
- /* Disable the UART Error Interrupt: (Frame error, noise error, overrun error) */
- __HAL_UART_DISABLE_IT(huart, UART_IT_ERR);
-
- huart->State = HAL_UART_STATE_READY;
- }
- HAL_UART_RxCpltCallback(huart);
-
- return HAL_OK;
- }
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Configures the UART peripheral.
- * @param huart: pointer to a UART_HandleTypeDef structure that contains
- * the configuration information for the specified UART module.
- * @retval None
- */
-static void UART_SetConfig(UART_HandleTypeDef *huart)
-{
- uint32_t tmpreg = 0x00;
-
- /* Check the parameters */
- assert_param(IS_UART_BAUDRATE(huart->Init.BaudRate));
- assert_param(IS_UART_STOPBITS(huart->Init.StopBits));
- assert_param(IS_UART_PARITY(huart->Init.Parity));
- assert_param(IS_UART_MODE(huart->Init.Mode));
-
- /*-------------------------- USART CR2 Configuration -----------------------*/
- tmpreg = huart->Instance->CR2;
-
- /* Clear STOP[13:12] bits */
- tmpreg &= (uint32_t)~((uint32_t)USART_CR2_STOP);
-
- /* Configure the UART Stop Bits: Set STOP[13:12] bits according to huart->Init.StopBits value */
- tmpreg |= (uint32_t)huart->Init.StopBits;
-
- /* Write to USART CR2 */
- huart->Instance->CR2 = (uint32_t)tmpreg;
-
- /*-------------------------- USART CR1 Configuration -----------------------*/
- tmpreg = huart->Instance->CR1;
-
- /* Clear M, PCE, PS, TE and RE bits */
- tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \
- USART_CR1_RE | USART_CR1_OVER8));
-
- /* Configure the UART Word Length, Parity and mode:
- Set the M bits according to huart->Init.WordLength value
- Set PCE and PS bits according to huart->Init.Parity value
- Set TE and RE bits according to huart->Init.Mode value
- Set OVER8 bit according to huart->Init.OverSampling value */
- tmpreg |= (uint32_t)huart->Init.WordLength | huart->Init.Parity | huart->Init.Mode | huart->Init.OverSampling;
-
- /* Write to USART CR1 */
- huart->Instance->CR1 = (uint32_t)tmpreg;
-
- /*-------------------------- USART CR3 Configuration -----------------------*/
- tmpreg = huart->Instance->CR3;
-
- /* Clear CTSE and RTSE bits */
- tmpreg &= (uint32_t)~((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE));
-
- /* Configure the UART HFC: Set CTSE and RTSE bits according to huart->Init.HwFlowCtl value */
- tmpreg |= huart->Init.HwFlowCtl;
-
- /* Write to USART CR3 */
- huart->Instance->CR3 = (uint32_t)tmpreg;
-
- /* Check the Over Sampling */
- if(huart->Init.OverSampling == UART_OVERSAMPLING_8)
- {
- /*-------------------------- USART BRR Configuration ---------------------*/
- if((huart->Instance == USART1) || (huart->Instance == USART6))
- {
- huart->Instance->BRR = UART_BRR_SAMPLING8(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate);
- }
- else
- {
- huart->Instance->BRR = UART_BRR_SAMPLING8(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate);
- }
- }
- else
- {
- /*-------------------------- USART BRR Configuration ---------------------*/
- if((huart->Instance == USART1) || (huart->Instance == USART6))
- {
- huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK2Freq(), huart->Init.BaudRate);
- }
- else
- {
- huart->Instance->BRR = UART_BRR_SAMPLING16(HAL_RCC_GetPCLK1Freq(), huart->Init.BaudRate);
- }
- }
-}
-
-/**
- * @}
- */
-
-#endif /* HAL_UART_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_usart.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_usart.c
deleted file mode 100644
index bbf2323..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_usart.c
+++ /dev/null
@@ -1,1857 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_usart.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief USART HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Universal Synchronous Asynchronous Receiver Transmitter (USART) peripheral:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral Control functions
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- The USART HAL driver can be used as follows:
-
- (#) Declare a USART_HandleTypeDef handle structure.
- (#) Initialize the USART low level resources by implementing the HAL_USART_MspInit () API:
- (##) Enable the USARTx interface clock.
- (##) USART pins configuration:
- (+++) Enable the clock for the USART GPIOs.
- (+++) Configure these USART pins as alternate function pull-up.
- (##) NVIC configuration if you need to use interrupt process (HAL_USART_Transmit_IT(),
- HAL_USART_Receive_IT() and HAL_USART_TransmitReceive_IT() APIs):
- (+++) Configure the USARTx interrupt priority.
- (+++) Enable the NVIC USART IRQ handle.
- (##) DMA Configuration if you need to use DMA process (HAL_USART_Transmit_DMA()
- HAL_USART_Receive_IT() and HAL_USART_TransmitReceive_IT() APIs):
- (+++) Declare a DMA handle structure for the Tx/Rx stream.
- (+++) Enable the DMAx interface clock.
- (+++) Configure the declared DMA handle structure with the required Tx/Rx parameters.
- (+++) Configure the DMA Tx/Rx Stream.
- (+++) Associate the initialized DMA handle to the USART DMA Tx/Rx handle.
- (+++) Configure the priority and enable the NVIC for the transfer complete interrupt on the DMA Tx/Rx Stream.
-
- (#) Program the Baud Rate, Word Length, Stop Bit, Parity, Hardware
- flow control and Mode(Receiver/Transmitter) in the husart Init structure.
-
- (#) Initialize the USART registers by calling the HAL_USART_Init() API:
- (++) These APIs configures also the low level Hardware GPIO, CLOCK, CORTEX...etc)
- by calling the customized HAL_USART_MspInit(&husart) API.
-
- -@@- The specific USART interrupts (Transmission complete interrupt,
- RXNE interrupt and Error Interrupts) will be managed using the macros
- __HAL_USART_ENABLE_IT() and __HAL_USART_DISABLE_IT() inside the transmit and receive process.
-
- (#) Three operation modes are available within this driver :
-
- *** Polling mode IO operation ***
- =================================
- [..]
- (+) Send an amount of data in blocking mode using HAL_USART_Transmit()
- (+) Receive an amount of data in blocking mode using HAL_USART_Receive()
-
- *** Interrupt mode IO operation ***
- ===================================
- [..]
- (+) Send an amount of data in non blocking mode using HAL_USART_Transmit_IT()
- (+) At transmission end of transfer HAL_USART_TxHalfCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_USART_TxCpltCallback
- (+) Receive an amount of data in non blocking mode using HAL_USART_Receive_IT()
- (+) At reception end of transfer HAL_USART_RxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_UART_RxCpltCallback
- (+) In case of transfer Error, HAL_USART_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_USART_ErrorCallback
-
- *** DMA mode IO operation ***
- ==============================
- [..]
- (+) Send an amount of data in non blocking mode (DMA) using HAL_USART_Transmit_DMA()
- (+) At transmission end of half transfer HAL_USART_TxHalfCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_USART_TxHalfCpltCallback
- (+) At transmission end of transfer HAL_USART_TxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_USART_TxCpltCallback
- (+) Receive an amount of data in non blocking mode (DMA) using HAL_USART_Receive_DMA()
- (+) At reception end of half transfer HAL_USART_RxHalfCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_USART_RxHalfCpltCallback
- (+) At reception end of transfer HAL_USART_RxCpltCallback is executed and user can
- add his own code by customization of function pointer HAL_USART_RxCpltCallback
- (+) In case of transfer Error, HAL_USART_ErrorCallback() function is executed and user can
- add his own code by customization of function pointer HAL_USART_ErrorCallback
- (+) Pause the DMA Transfer using HAL_USART_DMAPause()
- (+) Resume the DMA Transfer using HAL_USART_DMAResume()
- (+) Stop the DMA Transfer using HAL_USART_DMAStop()
-
- *** USART HAL driver macros list ***
- =============================================
- [..]
- Below the list of most used macros in USART HAL driver.
-
- (+) __HAL_USART_ENABLE: Enable the USART peripheral
- (+) __HAL_USART_DISABLE: Disable the USART peripheral
- (+) __HAL_USART_GET_FLAG : Check whether the specified USART flag is set or not
- (+) __HAL_USART_CLEAR_FLAG : Clear the specified USART pending flag
- (+) __HAL_USART_ENABLE_IT: Enable the specified USART interrupt
- (+) __HAL_USART_DISABLE_IT: Disable the specified USART interrupt
-
- [..]
- (@) You can refer to the USART HAL driver header file for more useful macros
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup USART USART
- * @brief HAL USART Synchronous module driver
- * @{
- */
-#ifdef HAL_USART_MODULE_ENABLED
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/** @addtogroup USART_Private_Constants
- * @{
- */
-#define DUMMY_DATA 0xFFFF
-#define USART_TIMEOUT_VALUE 22000
-/**
- * @}
- */
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/** @addtogroup USART_Private_Functions
- * @{
- */
-static HAL_StatusTypeDef USART_Transmit_IT(USART_HandleTypeDef *husart);
-static HAL_StatusTypeDef USART_EndTransmit_IT(USART_HandleTypeDef *husart);
-static HAL_StatusTypeDef USART_Receive_IT(USART_HandleTypeDef *husart);
-static HAL_StatusTypeDef USART_TransmitReceive_IT(USART_HandleTypeDef *husart);
-static void USART_SetConfig (USART_HandleTypeDef *husart);
-static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma);
-static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma);
-static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma);
-static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma);
-static void USART_DMAError(DMA_HandleTypeDef *hdma);
-static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, uint32_t Timeout);
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup USART_Exported_Functions USART Exported Functions
- * @{
- */
-
-/** @defgroup USART_Exported_Functions_Group1 USART Initialization and de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ==============================================================================
- ##### Initialization and Configuration functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to initialize the USART
- in asynchronous and in synchronous modes.
- (+) For the asynchronous mode only these parameters can be configured:
- (++) Baud Rate
- (++) Word Length
- (++) Stop Bit
- (++) Parity: If the parity is enabled, then the MSB bit of the data written
- in the data register is transmitted but is changed by the parity bit.
- Depending on the frame length defined by the M bit (8-bits or 9-bits),
- please refer to Reference manual for possible USART frame formats.
- (++) USART polarity
- (++) USART phase
- (++) USART LastBit
- (++) Receiver/transmitter modes
-
- [..]
- The HAL_USART_Init() function follows the USART synchronous configuration
- procedure (details for the procedure are available in reference manual (RM0329)).
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the USART mode according to the specified
- * parameters in the USART_InitTypeDef and create the associated handle.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart)
-{
- /* Check the USART handle allocation */
- if(husart == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_USART_INSTANCE(husart->Instance));
-
- if(husart->State == HAL_USART_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- husart->Lock = HAL_UNLOCKED;
- /* Init the low level hardware */
- HAL_USART_MspInit(husart);
- }
-
- husart->State = HAL_USART_STATE_BUSY;
-
- /* Set the USART Communication parameters */
- USART_SetConfig(husart);
-
- /* In USART mode, the following bits must be kept cleared:
- - LINEN bit in the USART_CR2 register
- - HDSEL, SCEN and IREN bits in the USART_CR3 register */
- husart->Instance->CR2 &= ~USART_CR2_LINEN;
- husart->Instance->CR3 &= ~(USART_CR3_IREN | USART_CR3_SCEN | USART_CR3_HDSEL);
-
- /* Enable the Peripheral */
- __HAL_USART_ENABLE(husart);
-
- /* Initialize the USART state */
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- husart->State= HAL_USART_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the USART peripheral.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart)
-{
- /* Check the USART handle allocation */
- if(husart == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_USART_INSTANCE(husart->Instance));
-
- husart->State = HAL_USART_STATE_BUSY;
-
- /* Disable the Peripheral */
- __HAL_USART_DISABLE(husart);
-
- /* DeInit the low level hardware */
- HAL_USART_MspDeInit(husart);
-
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- husart->State = HAL_USART_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(husart);
-
- return HAL_OK;
-}
-
-/**
- * @brief USART MSP Init.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval None
- */
- __weak void HAL_USART_MspInit(USART_HandleTypeDef *husart)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_USART_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief USART MSP DeInit.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval None
- */
- __weak void HAL_USART_MspDeInit(USART_HandleTypeDef *husart)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_USART_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup USART_Exported_Functions_Group2 IO operation functions
- * @brief USART Transmit and Receive functions
- *
-@verbatim
- ==============================================================================
- ##### IO operation functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to manage the USART synchronous
- data transfers.
-
- [..]
- The USART supports master mode only: it cannot receive or send data related to an input
- clock (SCLK is always an output).
-
- (#) There are two modes of transfer:
- (++) Blocking mode: The communication is performed in polling mode.
- The HAL status of all data processing is returned by the same function
- after finishing transfer.
- (++) No-Blocking mode: The communication is performed using Interrupts
- or DMA, These API's return the HAL status.
- The end of the data processing will be indicated through the
- dedicated USART IRQ when using Interrupt mode or the DMA IRQ when
- using DMA mode.
- The HAL_USART_TxCpltCallback(), HAL_USART_RxCpltCallback() and HAL_USART_TxRxCpltCallback()
- user callbacks
- will be executed respectively at the end of the transmit or Receive process
- The HAL_USART_ErrorCallback() user callback will be executed when a communication
- error is detected
-
- (#) Blocking mode APIs are :
- (++) HAL_USART_Transmit() in simplex mode
- (++) HAL_USART_Receive() in full duplex receive only
- (++) HAL_USART_TransmitReceive() in full duplex mode
-
- (#) Non Blocking mode APIs with Interrupt are :
- (++) HAL_USART_Transmit_IT()in simplex mode
- (++) HAL_USART_Receive_IT() in full duplex receive only
- (++) HAL_USART_TransmitReceive_IT() in full duplex mode
- (++) HAL_USART_IRQHandler()
-
- (#) Non Blocking mode functions with DMA are :
- (++) HAL_USART_Transmit_DMA()in simplex mode
- (++) HAL_USART_Receive_DMA() in full duplex receive only
- (++) HAL_USART_TransmitReceie_DMA() in full duplex mode
- (++) HAL_USART_DMAPause()
- (++) HAL_USART_DMAResume()
- (++) HAL_USART_DMAStop()
-
- (#) A set of Transfer Complete Callbacks are provided in non Blocking mode:
- (++) HAL_USART_TxHalfCpltCallback()
- (++) HAL_USART_TxCpltCallback()
- (++) HAL_USART_RxHalfCpltCallback()
- (++) HAL_USART_RxCpltCallback()
- (++) HAL_USART_ErrorCallback()
- (++) HAL_USART_TxRxCpltCallback()
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Simplex Send an amount of data in blocking mode.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @param pTxData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout)
-{
- uint16_t* tmp;
-
- if(husart->State == HAL_USART_STATE_READY)
- {
- if((pTxData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(husart);
-
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- husart->State = HAL_USART_STATE_BUSY_TX;
-
- husart->TxXferSize = Size;
- husart->TxXferCount = Size;
- while(husart->TxXferCount > 0)
- {
- husart->TxXferCount--;
- if(husart->Init.WordLength == USART_WORDLENGTH_9B)
- {
- /* Wait for TC flag in order to write data in DR */
- if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- tmp = (uint16_t*) pTxData;
- husart->Instance->DR = (*tmp & (uint16_t)0x01FF);
- if(husart->Init.Parity == USART_PARITY_NONE)
- {
- pTxData += 2;
- }
- else
- {
- pTxData += 1;
- }
- }
- else
- {
- if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- husart->Instance->DR = (*pTxData++ & (uint8_t)0xFF);
- }
- }
-
- if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TC, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- husart->State = HAL_USART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Full-Duplex Receive an amount of data in blocking mode.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @param pRxData: Pointer to data buffer
- * @param Size: Amount of data to be received
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
-{
- uint16_t* tmp;
-
- if(husart->State == HAL_USART_STATE_READY)
- {
- if((pRxData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
- /* Process Locked */
- __HAL_LOCK(husart);
-
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- husart->State = HAL_USART_STATE_BUSY_RX;
-
- husart->RxXferSize = Size;
- husart->RxXferCount = Size;
- /* Check the remain data to be received */
- while(husart->RxXferCount > 0)
- {
- husart->RxXferCount--;
- if(husart->Init.WordLength == USART_WORDLENGTH_9B)
- {
- /* Wait until TXE flag is set to send dummy byte in order to generate the clock for the slave to send data */
- if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- /* Send dummy byte in order to generate clock */
- husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x01FF);
-
- /* Wait for RXNE Flag */
- if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- tmp = (uint16_t*) pRxData ;
- if(husart->Init.Parity == USART_PARITY_NONE)
- {
- *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF);
- pRxData +=2;
- }
- else
- {
- *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FF);
- pRxData +=1;
- }
- }
- else
- {
- /* Wait until TXE flag is set to send dummy byte in order to generate the clock for the slave to send data */
- if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
-
- /* Send Dummy Byte in order to generate clock */
- husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x00FF);
-
- /* Wait until RXNE flag is set to receive the byte */
- if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- if(husart->Init.Parity == USART_PARITY_NONE)
- {
- /* Receive data */
- *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF);
- }
- else
- {
- /* Receive data */
- *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F);
- }
-
- }
- }
-
- husart->State = HAL_USART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Full-Duplex Send receive an amount of data in full-duplex mode (blocking mode).
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @param pTxData: Pointer to data transmitted buffer
- * @param pRxData: Pointer to data received buffer
- * @param Size: Amount of data to be sent
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout)
-{
- uint16_t* tmp;
-
- if(husart->State == HAL_USART_STATE_READY)
- {
- if((pTxData == NULL) || (pRxData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
- /* Process Locked */
- __HAL_LOCK(husart);
-
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- husart->State = HAL_USART_STATE_BUSY_RX;
-
- husart->RxXferSize = Size;
- husart->TxXferSize = Size;
- husart->TxXferCount = Size;
- husart->RxXferCount = Size;
-
- /* Check the remain data to be received */
- while(husart->TxXferCount > 0)
- {
- husart->TxXferCount--;
- husart->RxXferCount--;
- if(husart->Init.WordLength == USART_WORDLENGTH_9B)
- {
- /* Wait for TC flag in order to write data in DR */
- if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- tmp = (uint16_t*) pTxData;
- husart->Instance->DR = (*tmp & (uint16_t)0x01FF);
- if(husart->Init.Parity == USART_PARITY_NONE)
- {
- pTxData += 2;
- }
- else
- {
- pTxData += 1;
- }
-
- /* Wait for RXNE Flag */
- if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- tmp = (uint16_t*) pRxData ;
- if(husart->Init.Parity == USART_PARITY_NONE)
- {
- *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF);
- pRxData += 2;
- }
- else
- {
- *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FF);
- pRxData += 1;
- }
- }
- else
- {
- /* Wait for TC flag in order to write data in DR */
- if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_TXE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- husart->Instance->DR = (*pTxData++ & (uint8_t)0x00FF);
-
- /* Wait for RXNE Flag */
- if(USART_WaitOnFlagUntilTimeout(husart, USART_FLAG_RXNE, RESET, Timeout) != HAL_OK)
- {
- return HAL_TIMEOUT;
- }
- if(husart->Init.Parity == USART_PARITY_NONE)
- {
- /* Receive data */
- *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF);
- }
- else
- {
- /* Receive data */
- *pRxData++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F);
- }
- }
- }
-
- husart->State = HAL_USART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Simplex Send an amount of data in non-blocking mode.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @param pTxData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- * @note The USART errors are not managed to avoid the overrun error.
- */
-HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size)
-{
- if(husart->State == HAL_USART_STATE_READY)
- {
- if((pTxData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(husart);
-
- husart->pTxBuffPtr = pTxData;
- husart->TxXferSize = Size;
- husart->TxXferCount = Size;
-
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- husart->State = HAL_USART_STATE_BUSY_TX;
-
- /* The USART Error Interrupts: (Frame error, Noise error, Overrun error)
- are not managed by the USART transmit process to avoid the overrun interrupt
- when the USART mode is configured for transmit and receive "USART_MODE_TX_RX"
- to benefit for the frame error and noise interrupts the USART mode should be
- configured only for transmit "USART_MODE_TX"
- The __HAL_USART_ENABLE_IT(husart, USART_IT_ERR) can be used to enable the Frame error,
- Noise error interrupt */
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- /* Enable the USART Transmit Data Register Empty Interrupt */
- __HAL_USART_ENABLE_IT(husart, USART_IT_TXE);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Simplex Receive an amount of data in non-blocking mode.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @param pRxData: Pointer to data buffer
- * @param Size: Amount of data to be received
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size)
-{
- if(husart->State == HAL_USART_STATE_READY)
- {
- if((pRxData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
- /* Process Locked */
- __HAL_LOCK(husart);
-
- husart->pRxBuffPtr = pRxData;
- husart->RxXferSize = Size;
- husart->RxXferCount = Size;
-
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- husart->State = HAL_USART_STATE_BUSY_RX;
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- /* Enable the USART Data Register not empty Interrupt */
- __HAL_USART_ENABLE_IT(husart, USART_IT_RXNE);
-
- /* Enable the USART Parity Error Interrupt */
- __HAL_USART_ENABLE_IT(husart, USART_IT_PE);
-
- /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */
- __HAL_USART_ENABLE_IT(husart, USART_IT_ERR);
-
- /* Send dummy byte in order to generate the clock for the slave to send data */
- husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x01FF);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Full-Duplex Send receive an amount of data in full-duplex mode (non-blocking).
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @param pTxData: Pointer to data transmitted buffer
- * @param pRxData: Pointer to data received buffer
- * @param Size: Amount of data to be received
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
-{
- if(husart->State == HAL_USART_STATE_READY)
- {
- if((pTxData == NULL) || (pRxData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
- /* Process Locked */
- __HAL_LOCK(husart);
-
- husart->pRxBuffPtr = pRxData;
- husart->RxXferSize = Size;
- husart->RxXferCount = Size;
- husart->pTxBuffPtr = pTxData;
- husart->TxXferSize = Size;
- husart->TxXferCount = Size;
-
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- husart->State = HAL_USART_STATE_BUSY_TX_RX;
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- /* Enable the USART Data Register not empty Interrupt */
- __HAL_USART_ENABLE_IT(husart, USART_IT_RXNE);
-
- /* Enable the USART Parity Error Interrupt */
- __HAL_USART_ENABLE_IT(husart, USART_IT_PE);
-
- /* Enable the USART Error Interrupt: (Frame error, noise error, overrun error) */
- __HAL_USART_ENABLE_IT(husart, USART_IT_ERR);
-
- /* Enable the USART Transmit Data Register Empty Interrupt */
- __HAL_USART_ENABLE_IT(husart, USART_IT_TXE);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Simplex Send an amount of data in non-blocking mode.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @param pTxData: Pointer to data buffer
- * @param Size: Amount of data to be sent
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size)
-{
- uint32_t *tmp;
-
- if(husart->State == HAL_USART_STATE_READY)
- {
- if((pTxData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
- /* Process Locked */
- __HAL_LOCK(husart);
-
- husart->pTxBuffPtr = pTxData;
- husart->TxXferSize = Size;
- husart->TxXferCount = Size;
-
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- husart->State = HAL_USART_STATE_BUSY_TX;
-
- /* Set the USART DMA transfer complete callback */
- husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt;
-
- /* Set the USART DMA Half transfer complete callback */
- husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt;
-
- /* Set the DMA error callback */
- husart->hdmatx->XferErrorCallback = USART_DMAError;
-
- /* Enable the USART transmit DMA Stream */
- tmp = (uint32_t*)&pTxData;
- HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->DR, Size);
-
- /* Clear the TC flag in the SR register by writing 0 to it */
- __HAL_USART_CLEAR_FLAG(husart, USART_FLAG_TC);
-
- /* Enable the DMA transfer for transmit request by setting the DMAT bit
- in the USART CR3 register */
- husart->Instance->CR3 |= USART_CR3_DMAT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Full-Duplex Receive an amount of data in non-blocking mode.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @param pRxData: Pointer to data buffer
- * @param Size: Amount of data to be received
- * @retval HAL status
- * @note The USART DMA transmit stream must be configured in order to generate the clock for the slave.
- * @note When the USART parity is enabled (PCE = 1) the data received contain the parity bit.
- */
-HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size)
-{
- uint32_t *tmp;
-
- if(husart->State == HAL_USART_STATE_READY)
- {
- if((pRxData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
-
- /* Process Locked */
- __HAL_LOCK(husart);
-
- husart->pRxBuffPtr = pRxData;
- husart->RxXferSize = Size;
- husart->pTxBuffPtr = pRxData;
- husart->TxXferSize = Size;
-
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- husart->State = HAL_USART_STATE_BUSY_RX;
-
- /* Set the USART DMA Rx transfer complete callback */
- husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt;
-
- /* Set the USART DMA Half transfer complete callback */
- husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt;
-
- /* Set the USART DMA Rx transfer error callback */
- husart->hdmarx->XferErrorCallback = USART_DMAError;
-
- /* Enable the USART receive DMA Stream */
- tmp = (uint32_t*)&pRxData;
- HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->DR, *(uint32_t*)tmp, Size);
-
- /* Enable the USART transmit DMA Stream: the transmit stream is used in order
- to generate in the non-blocking mode the clock to the slave device,
- this mode isn't a simplex receive mode but a full-duplex receive one */
- HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->DR, Size);
-
- /* Clear the Overrun flag just before enabling the DMA Rx request: mandatory for the second transfer
- when using the USART in circular mode */
- __HAL_USART_CLEAR_OREFLAG(husart);
-
- /* Enable the DMA transfer for the receiver request by setting the DMAR bit
- in the USART CR3 register */
- husart->Instance->CR3 |= USART_CR3_DMAR;
-
- /* Enable the DMA transfer for transmit request by setting the DMAT bit
- in the USART CR3 register */
- husart->Instance->CR3 |= USART_CR3_DMAT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Full-Duplex Transmit Receive an amount of data in non-blocking mode.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @param pTxData: Pointer to data transmitted buffer
- * @param pRxData: Pointer to data received buffer
- * @param Size: Amount of data to be received
- * @note When the USART parity is enabled (PCE = 1) the data received contain the parity bit.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size)
-{
- uint32_t *tmp;
-
- if(husart->State == HAL_USART_STATE_READY)
- {
- if((pTxData == NULL) || (pRxData == NULL) || (Size == 0))
- {
- return HAL_ERROR;
- }
- /* Process Locked */
- __HAL_LOCK(husart);
-
- husart->pRxBuffPtr = pRxData;
- husart->RxXferSize = Size;
- husart->pTxBuffPtr = pTxData;
- husart->TxXferSize = Size;
-
- husart->ErrorCode = HAL_USART_ERROR_NONE;
- husart->State = HAL_USART_STATE_BUSY_TX_RX;
-
- /* Set the USART DMA Rx transfer complete callback */
- husart->hdmarx->XferCpltCallback = USART_DMAReceiveCplt;
-
- /* Set the USART DMA Half transfer complete callback */
- husart->hdmarx->XferHalfCpltCallback = USART_DMARxHalfCplt;
-
- /* Set the USART DMA Tx transfer complete callback */
- husart->hdmatx->XferCpltCallback = USART_DMATransmitCplt;
-
- /* Set the USART DMA Half transfer complete callback */
- husart->hdmatx->XferHalfCpltCallback = USART_DMATxHalfCplt;
-
- /* Set the USART DMA Tx transfer error callback */
- husart->hdmatx->XferErrorCallback = USART_DMAError;
-
- /* Set the USART DMA Rx transfer error callback */
- husart->hdmarx->XferErrorCallback = USART_DMAError;
-
- /* Enable the USART receive DMA Stream */
- tmp = (uint32_t*)&pRxData;
- HAL_DMA_Start_IT(husart->hdmarx, (uint32_t)&husart->Instance->DR, *(uint32_t*)tmp, Size);
-
- /* Enable the USART transmit DMA Stream */
- tmp = (uint32_t*)&pTxData;
- HAL_DMA_Start_IT(husart->hdmatx, *(uint32_t*)tmp, (uint32_t)&husart->Instance->DR, Size);
-
- /* Clear the TC flag in the SR register by writing 0 to it */
- __HAL_USART_CLEAR_FLAG(husart, USART_FLAG_TC);
-
- /* Clear the Overrun flag: mandatory for the second transfer in circular mode */
- __HAL_USART_CLEAR_OREFLAG(husart);
-
- /* Enable the DMA transfer for the receiver request by setting the DMAR bit
- in the USART CR3 register */
- husart->Instance->CR3 |= USART_CR3_DMAR;
-
- /* Enable the DMA transfer for transmit request by setting the DMAT bit
- in the USART CR3 register */
- husart->Instance->CR3 |= USART_CR3_DMAT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Pauses the DMA Transfer.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart)
-{
- /* Process Locked */
- __HAL_LOCK(husart);
-
- /* Disable the USART DMA Tx request */
- husart->Instance->CR3 &= (uint32_t)(~USART_CR3_DMAT);
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- return HAL_OK;
-}
-
-/**
- * @brief Resumes the DMA Transfer.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart)
-{
- /* Process Locked */
- __HAL_LOCK(husart);
-
- /* Enable the USART DMA Tx request */
- husart->Instance->CR3 |= USART_CR3_DMAT;
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- return HAL_OK;
-}
-
-/**
- * @brief Stops the DMA Transfer.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart)
-{
- /* The Lock is not implemented on this API to allow the user application
- to call the HAL USART API under callbacks HAL_USART_TxCpltCallback() / HAL_USART_RxCpltCallback():
- when calling HAL_DMA_Abort() API the DMA TX/RX Transfer complete interrupt is generated
- and the correspond call back is executed HAL_USART_TxCpltCallback() / HAL_USART_RxCpltCallback()
- */
-
- /* Abort the USART DMA Tx Stream */
- if(husart->hdmatx != NULL)
- {
- HAL_DMA_Abort(husart->hdmatx);
- }
- /* Abort the USART DMA Rx Stream */
- if(husart->hdmarx != NULL)
- {
- HAL_DMA_Abort(husart->hdmarx);
- }
-
- /* Disable the USART Tx/Rx DMA requests */
- husart->Instance->CR3 &= ~USART_CR3_DMAT;
- husart->Instance->CR3 &= ~USART_CR3_DMAR;
-
- husart->State = HAL_USART_STATE_READY;
-
- return HAL_OK;
-}
-
-/**
- * @brief This function handles USART interrupt request.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval None
- */
-void HAL_USART_IRQHandler(USART_HandleTypeDef *husart)
-{
- uint32_t tmp1 = 0, tmp2 = 0;
-
- tmp1 = __HAL_USART_GET_FLAG(husart, USART_FLAG_PE);
- tmp2 = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_PE);
- /* USART parity error interrupt occurred -----------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- __HAL_USART_CLEAR_PEFLAG(husart);
- husart->ErrorCode |= HAL_USART_ERROR_PE;
- }
-
- tmp1 = __HAL_USART_GET_FLAG(husart, USART_FLAG_FE);
- tmp2 = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_ERR);
- /* USART frame error interrupt occurred ------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- __HAL_USART_CLEAR_FEFLAG(husart);
- husart->ErrorCode |= HAL_USART_ERROR_FE;
- }
-
- tmp1 = __HAL_USART_GET_FLAG(husart, USART_FLAG_NE);
- tmp2 = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_ERR);
- /* USART noise error interrupt occurred ------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- __HAL_USART_CLEAR_NEFLAG(husart);
- husart->ErrorCode |= HAL_USART_ERROR_NE;
- }
-
- tmp1 = __HAL_USART_GET_FLAG(husart, USART_FLAG_ORE);
- tmp2 = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_ERR);
- /* USART Over-Run interrupt occurred ---------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- __HAL_USART_CLEAR_OREFLAG(husart);
- husart->ErrorCode |= HAL_USART_ERROR_ORE;
- }
-
- if(husart->ErrorCode != HAL_USART_ERROR_NONE)
- {
- /* Set the USART state ready to be able to start again the process */
- husart->State = HAL_USART_STATE_READY;
-
- HAL_USART_ErrorCallback(husart);
- }
-
- tmp1 = __HAL_USART_GET_FLAG(husart, USART_FLAG_RXNE);
- tmp2 = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_RXNE);
- /* USART in mode Receiver --------------------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- if(husart->State == HAL_USART_STATE_BUSY_RX)
- {
- USART_Receive_IT(husart);
- }
- else
- {
- USART_TransmitReceive_IT(husart);
- }
- }
-
- tmp1 = __HAL_USART_GET_FLAG(husart, USART_FLAG_TXE);
- tmp2 = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_TXE);
- /* USART in mode Transmitter -----------------------------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- if(husart->State == HAL_USART_STATE_BUSY_TX)
- {
- USART_Transmit_IT(husart);
- }
- else
- {
- USART_TransmitReceive_IT(husart);
- }
- }
-
- tmp1 = __HAL_USART_GET_FLAG(husart, USART_FLAG_TC);
- tmp2 = __HAL_USART_GET_IT_SOURCE(husart, USART_IT_TC);
- /* USART in mode Transmitter (transmission end) ----------------------------*/
- if((tmp1 != RESET) && (tmp2 != RESET))
- {
- USART_EndTransmit_IT(husart);
- }
-}
-
-/**
- * @brief Tx Transfer completed callbacks.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval None
- */
- __weak void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_USART_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Tx Half Transfer completed callbacks.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval None
- */
- __weak void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_USART_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Transfer completed callbacks.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval None
- */
-__weak void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_USART_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Rx Half Transfer completed callbacks.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval None
- */
-__weak void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_USART_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief Tx/Rx Transfers completed callback for the non-blocking process.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval None
- */
-__weak void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_USART_TxCpltCallback could be implemented in the user file
- */
-}
-
-/**
- * @brief USART error callbacks.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval None
- */
- __weak void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_USART_ErrorCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup USART_Exported_Functions_Group3 Peripheral State and Errors functions
- * @brief USART State and Errors functions
- *
-@verbatim
- ==============================================================================
- ##### Peripheral State and Errors functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to return the State of
- USART communication
- process, return Peripheral Errors occurred during communication process
- (+) HAL_USART_GetState() API can be helpful to check in run-time the state
- of the USART peripheral.
- (+) HAL_USART_GetError() check in run-time errors that could be occurred during
- communication.
-@endverbatim
- * @{
- */
-
-/**
- * @brief Returns the USART state.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval HAL state
- */
-HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart)
-{
- return husart->State;
-}
-
-/**
- * @brief Return the USART error code
- * @param husart : pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART.
- * @retval USART Error Code
- */
-uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart)
-{
- return husart->ErrorCode;
-}
-
-/**
- * @}
- */
-
-
-/**
- * @brief DMA USART transmit process complete callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void USART_DMATransmitCplt(DMA_HandleTypeDef *hdma)
-{
- USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- /* DMA Normal mode */
- if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
- {
- husart->TxXferCount = 0;
- if(husart->State == HAL_USART_STATE_BUSY_TX)
- {
- /* Disable the DMA transfer for transmit request by resetting the DMAT bit
- in the USART CR3 register */
- CLEAR_BIT(husart->Instance->CR3, USART_CR3_DMAT);
-
- /* Enable the USART Transmit Complete Interrupt */
- __HAL_USART_ENABLE_IT(husart, USART_IT_TC);
- }
- }
- /* DMA Circular mode */
- else
- {
- if(husart->State == HAL_USART_STATE_BUSY_TX)
- {
- HAL_USART_TxCpltCallback(husart);
- }
- }
-}
-
-/**
- * @brief DMA USART transmit process half complete callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void USART_DMATxHalfCplt(DMA_HandleTypeDef *hdma)
-{
- USART_HandleTypeDef* husart = (USART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- HAL_USART_TxHalfCpltCallback(husart);
-}
-
-/**
- * @brief DMA USART receive process complete callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void USART_DMAReceiveCplt(DMA_HandleTypeDef *hdma)
-{
- USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
- /* DMA Normal mode */
- if((hdma->Instance->CR & DMA_SxCR_CIRC) == 0)
- {
- husart->RxXferCount = 0;
- if(husart->State == HAL_USART_STATE_BUSY_RX)
- {
- /* Disable the DMA transfer for the Transmit/receiver requests by setting the DMAT/DMAR bit
- in the USART CR3 register */
- husart->Instance->CR3 &= ~(USART_CR3_DMAR);
-
- husart->State= HAL_USART_STATE_READY;
- HAL_USART_RxCpltCallback(husart);
- }
- /* The USART state is HAL_USART_STATE_BUSY_TX_RX */
- else
- {
- /* Disable the DMA transfer for the Transmit/receiver requests by setting the DMAT/DMAR bit
- in the USART CR3 register */
- husart->Instance->CR3 &= ~(USART_CR3_DMAR);
- husart->Instance->CR3 &= ~(USART_CR3_DMAT);
-
- husart->State= HAL_USART_STATE_READY;
- HAL_USART_TxRxCpltCallback(husart);
- }
- }
- /* DMA circular mode */
- else
- {
- if(husart->State == HAL_USART_STATE_BUSY_RX)
- {
- HAL_USART_RxCpltCallback(husart);
- }
- /* The USART state is HAL_USART_STATE_BUSY_TX_RX */
- else
- {
- HAL_USART_TxRxCpltCallback(husart);
- }
- }
-}
-
-/**
- * @brief DMA USART receive process half complete callback
- * @param hdma: pointer to a DMA_HandleTypeDef structure that contains
- * the configuration information for the specified DMA module.
- * @retval None
- */
-static void USART_DMARxHalfCplt(DMA_HandleTypeDef *hdma)
-{
- USART_HandleTypeDef* husart = (USART_HandleTypeDef*)((DMA_HandleTypeDef*)hdma)->Parent;
-
- HAL_USART_RxHalfCpltCallback(husart);
-}
-
-/**
- * @brief DMA USART communication error callback.
- * @param hdma: DMA handle
- * @retval None
- */
-static void USART_DMAError(DMA_HandleTypeDef *hdma)
-{
- USART_HandleTypeDef* husart = ( USART_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent;
-
- husart->RxXferCount = 0;
- husart->TxXferCount = 0;
- husart->ErrorCode |= HAL_USART_ERROR_DMA;
- husart->State= HAL_USART_STATE_READY;
-
- HAL_USART_ErrorCallback(husart);
-}
-
-/**
- * @brief This function handles USART Communication Timeout.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @param Flag: specifies the USART flag to check.
- * @param Status: The new Flag status (SET or RESET).
- * @param Timeout: Timeout duration
- * @retval HAL status
- */
-static HAL_StatusTypeDef USART_WaitOnFlagUntilTimeout(USART_HandleTypeDef *husart, uint32_t Flag, FlagStatus Status, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait until flag is set */
- if(Status == RESET)
- {
- while(__HAL_USART_GET_FLAG(husart, Flag) == RESET)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
- __HAL_USART_DISABLE_IT(husart, USART_IT_TXE);
- __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE);
- __HAL_USART_DISABLE_IT(husart, USART_IT_PE);
- __HAL_USART_DISABLE_IT(husart, USART_IT_ERR);
-
- husart->State= HAL_USART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- else
- {
- while(__HAL_USART_GET_FLAG(husart, Flag) != RESET)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- /* Disable TXE, RXNE, PE and ERR (Frame error, noise error, overrun error) interrupts for the interrupt process */
- __HAL_USART_DISABLE_IT(husart, USART_IT_TXE);
- __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE);
- __HAL_USART_DISABLE_IT(husart, USART_IT_PE);
- __HAL_USART_DISABLE_IT(husart, USART_IT_ERR);
-
- husart->State= HAL_USART_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(husart);
-
- return HAL_TIMEOUT;
- }
- }
- }
- }
- return HAL_OK;
-}
-
-
-/**
- * @brief Simplex Send an amount of data in non-blocking mode.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval HAL status
- * @note The USART errors are not managed to avoid the overrun error.
- */
-static HAL_StatusTypeDef USART_Transmit_IT(USART_HandleTypeDef *husart)
-{
- uint16_t* tmp;
-
- if(husart->State == HAL_USART_STATE_BUSY_TX)
- {
- if(husart->Init.WordLength == USART_WORDLENGTH_9B)
- {
- tmp = (uint16_t*) husart->pTxBuffPtr;
- husart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF);
- if(husart->Init.Parity == USART_PARITY_NONE)
- {
- husart->pTxBuffPtr += 2;
- }
- else
- {
- husart->pTxBuffPtr += 1;
- }
- }
- else
- {
- husart->Instance->DR = (uint8_t)(*husart->pTxBuffPtr++ & (uint8_t)0x00FF);
- }
-
- if(--husart->TxXferCount == 0)
- {
- /* Disable the USART Transmit data register empty Interrupt */
- __HAL_USART_DISABLE_IT(husart, USART_IT_TXE);
-
- /* Enable the USART Transmit Complete Interrupt */
- __HAL_USART_ENABLE_IT(husart, USART_IT_TC);
- }
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Wraps up transmission in non blocking mode.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval HAL status
- */
-static HAL_StatusTypeDef USART_EndTransmit_IT(USART_HandleTypeDef *husart)
-{
- /* Disable the USART Transmit Complete Interrupt */
- __HAL_USART_DISABLE_IT(husart, USART_IT_TC);
-
- /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
- __HAL_USART_DISABLE_IT(husart, USART_IT_ERR);
-
- husart->State = HAL_USART_STATE_READY;
-
- HAL_USART_TxCpltCallback(husart);
-
- return HAL_OK;
-}
-
-/**
- * @brief Simplex Receive an amount of data in non-blocking mode.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval HAL status
- */
-static HAL_StatusTypeDef USART_Receive_IT(USART_HandleTypeDef *husart)
-{
- uint16_t* tmp;
- if(husart->State == HAL_USART_STATE_BUSY_RX)
- {
- if(husart->Init.WordLength == USART_WORDLENGTH_9B)
- {
- tmp = (uint16_t*) husart->pRxBuffPtr;
- if(husart->Init.Parity == USART_PARITY_NONE)
- {
- *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF);
- husart->pRxBuffPtr += 2;
- }
- else
- {
- *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FF);
- husart->pRxBuffPtr += 1;
- }
- if(--husart->RxXferCount != 0x00)
- {
- /* Send dummy byte in order to generate the clock for the slave to send the next data */
- husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x01FF);
- }
- }
- else
- {
- if(husart->Init.Parity == USART_PARITY_NONE)
- {
- *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF);
- }
- else
- {
- *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F);
- }
-
- if(--husart->RxXferCount != 0x00)
- {
- /* Send dummy byte in order to generate the clock for the slave to send the next data */
- husart->Instance->DR = (DUMMY_DATA & (uint16_t)0x00FF);
- }
- }
-
- if(husart->RxXferCount == 0)
- {
- /* Disable the USART RXNE Interrupt */
- __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE);
-
- /* Disable the USART Parity Error Interrupt */
- __HAL_USART_DISABLE_IT(husart, USART_IT_PE);
-
- /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
- __HAL_USART_DISABLE_IT(husart, USART_IT_ERR);
-
- husart->State = HAL_USART_STATE_READY;
- HAL_USART_RxCpltCallback(husart);
-
- return HAL_OK;
- }
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Full-Duplex Send receive an amount of data in full-duplex mode (non-blocking).
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval HAL status
- */
-static HAL_StatusTypeDef USART_TransmitReceive_IT(USART_HandleTypeDef *husart)
-{
- uint16_t* tmp;
-
- if(husart->State == HAL_USART_STATE_BUSY_TX_RX)
- {
- if(husart->TxXferCount != 0x00)
- {
- if(__HAL_USART_GET_FLAG(husart, USART_FLAG_TXE) != RESET)
- {
- if(husart->Init.WordLength == USART_WORDLENGTH_9B)
- {
- tmp = (uint16_t*) husart->pTxBuffPtr;
- husart->Instance->DR = (uint16_t)(*tmp & (uint16_t)0x01FF);
- if(husart->Init.Parity == USART_PARITY_NONE)
- {
- husart->pTxBuffPtr += 2;
- }
- else
- {
- husart->pTxBuffPtr += 1;
- }
- }
- else
- {
- husart->Instance->DR = (uint8_t)(*husart->pTxBuffPtr++ & (uint8_t)0x00FF);
- }
- husart->TxXferCount--;
-
- /* Check the latest data transmitted */
- if(husart->TxXferCount == 0)
- {
- __HAL_USART_DISABLE_IT(husart, USART_IT_TXE);
- }
- }
- }
-
- if(husart->RxXferCount != 0x00)
- {
- if(__HAL_USART_GET_FLAG(husart, USART_FLAG_RXNE) != RESET)
- {
- if(husart->Init.WordLength == USART_WORDLENGTH_9B)
- {
- tmp = (uint16_t*) husart->pRxBuffPtr;
- if(husart->Init.Parity == USART_PARITY_NONE)
- {
- *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x01FF);
- husart->pRxBuffPtr += 2;
- }
- else
- {
- *tmp = (uint16_t)(husart->Instance->DR & (uint16_t)0x00FF);
- husart->pRxBuffPtr += 1;
- }
- }
- else
- {
- if(husart->Init.Parity == USART_PARITY_NONE)
- {
- *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x00FF);
- }
- else
- {
- *husart->pRxBuffPtr++ = (uint8_t)(husart->Instance->DR & (uint8_t)0x007F);
- }
- }
- husart->RxXferCount--;
- }
- }
-
- /* Check the latest data received */
- if(husart->RxXferCount == 0)
- {
- __HAL_USART_DISABLE_IT(husart, USART_IT_RXNE);
-
- /* Disable the USART Parity Error Interrupt */
- __HAL_USART_DISABLE_IT(husart, USART_IT_PE);
-
- /* Disable the USART Error Interrupt: (Frame error, noise error, overrun error) */
- __HAL_USART_DISABLE_IT(husart, USART_IT_ERR);
-
- husart->State = HAL_USART_STATE_READY;
-
- HAL_USART_TxRxCpltCallback(husart);
-
- return HAL_OK;
- }
-
- return HAL_OK;
- }
- else
- {
- return HAL_BUSY;
- }
-}
-
-/**
- * @brief Configures the USART peripheral.
- * @param husart: pointer to a USART_HandleTypeDef structure that contains
- * the configuration information for the specified USART module.
- * @retval None
- */
-static void USART_SetConfig(USART_HandleTypeDef *husart)
-{
- uint32_t tmpreg = 0x00;
-
- /* Check the parameters */
- assert_param(IS_USART_INSTANCE(husart->Instance));
- assert_param(IS_USART_POLARITY(husart->Init.CLKPolarity));
- assert_param(IS_USART_PHASE(husart->Init.CLKPhase));
- assert_param(IS_USART_LASTBIT(husart->Init.CLKLastBit));
- assert_param(IS_USART_BAUDRATE(husart->Init.BaudRate));
- assert_param(IS_USART_WORD_LENGTH(husart->Init.WordLength));
- assert_param(IS_USART_STOPBITS(husart->Init.StopBits));
- assert_param(IS_USART_PARITY(husart->Init.Parity));
- assert_param(IS_USART_MODE(husart->Init.Mode));
-
- /* The LBCL, CPOL and CPHA bits have to be selected when both the transmitter and the
- receiver are disabled (TE=RE=0) to ensure that the clock pulses function correctly. */
- husart->Instance->CR1 &= (uint32_t)~((uint32_t)(USART_CR1_TE | USART_CR1_RE));
-
- /*---------------------------- USART CR2 Configuration ---------------------*/
- tmpreg = husart->Instance->CR2;
- /* Clear CLKEN, CPOL, CPHA and LBCL bits */
- tmpreg &= (uint32_t)~((uint32_t)(USART_CR2_CPHA | USART_CR2_CPOL | USART_CR2_CLKEN | USART_CR2_LBCL | USART_CR2_STOP));
- /* Configure the USART Clock, CPOL, CPHA and LastBit -----------------------*/
- /* Set CPOL bit according to husart->Init.CLKPolarity value */
- /* Set CPHA bit according to husart->Init.CLKPhase value */
- /* Set LBCL bit according to husart->Init.CLKLastBit value */
- /* Set Stop Bits: Set STOP[13:12] bits according to husart->Init.StopBits value */
- tmpreg |= (uint32_t)(USART_CLOCK_ENABLE| husart->Init.CLKPolarity |
- husart->Init.CLKPhase| husart->Init.CLKLastBit | husart->Init.StopBits);
- /* Write to USART CR2 */
- husart->Instance->CR2 = (uint32_t)tmpreg;
-
- /*-------------------------- USART CR1 Configuration -----------------------*/
- tmpreg = husart->Instance->CR1;
-
- /* Clear M, PCE, PS, TE, RE and OVER8 bits */
- tmpreg &= (uint32_t)~((uint32_t)(USART_CR1_M | USART_CR1_PCE | USART_CR1_PS | USART_CR1_TE | \
- USART_CR1_RE | USART_CR1_OVER8));
-
- /* Configure the USART Word Length, Parity and mode:
- Set the M bits according to husart->Init.WordLength value
- Set PCE and PS bits according to husart->Init.Parity value
- Set TE and RE bits according to husart->Init.Mode value
- Force OVER8 bit to 1 in order to reach the max USART frequencies */
- tmpreg |= (uint32_t)husart->Init.WordLength | husart->Init.Parity | husart->Init.Mode | USART_CR1_OVER8;
-
- /* Write to USART CR1 */
- husart->Instance->CR1 = (uint32_t)tmpreg;
-
- /*-------------------------- USART CR3 Configuration -----------------------*/
- /* Clear CTSE and RTSE bits */
- husart->Instance->CR3 &= (uint32_t)~((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE));
-
- /*-------------------------- USART BRR Configuration -----------------------*/
- if((husart->Instance == USART1) || (husart->Instance == USART6))
- {
- husart->Instance->BRR = USART_BRR(HAL_RCC_GetPCLK2Freq(), husart->Init.BaudRate);
- }
- else
- {
- husart->Instance->BRR = USART_BRR(HAL_RCC_GetPCLK1Freq(), husart->Init.BaudRate);
- }
-}
-
-/**
- * @}
- */
-
-#endif /* HAL_USART_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_wwdg.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_wwdg.c
deleted file mode 100644
index 18b8d3f..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_wwdg.c
+++ /dev/null
@@ -1,454 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_hal_wwdg.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief WWDG HAL module driver.
- * This file provides firmware functions to manage the following
- * functionalities of the Window Watchdog (WWDG) peripheral:
- * + Initialization and de-initialization functions
- * + IO operation functions
- * + Peripheral State functions
- @verbatim
- ==============================================================================
- ##### WWDG specific features #####
- ==============================================================================
- [..]
- Once enabled the WWDG generates a system reset on expiry of a programmed
- time period, unless the program refreshes the counter (downcounter)
- before reaching 0x3F value (i.e. a reset is generated when the counter
- value rolls over from 0x40 to 0x3F).
-
- (+) An MCU reset is also generated if the counter value is refreshed
- before the counter has reached the refresh window value. This
- implies that the counter must be refreshed in a limited window.
- (+) Once enabled the WWDG cannot be disabled except by a system reset.
- (+) WWDGRST flag in RCC_CSR register can be used to inform when a WWDG
- reset occurs.
- (+) The WWDG counter input clock is derived from the APB clock divided
- by a programmable prescaler.
- (+) WWDG clock (Hz) = PCLK1 / (4096 * Prescaler)
- (+) WWDG timeout (mS) = 1000 * Counter / WWDG clock
- (+) WWDG Counter refresh is allowed between the following limits :
- (++) min time (mS) = 1000 * (Counter – Window) / WWDG clock
- (++) max time (mS) = 1000 * (Counter – 0x40) / WWDG clock
-
- (+) Min-max timeout value at 50 MHz(PCLK1): 81.9 us / 41.9 ms
-
-
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (+) Enable WWDG APB1 clock using __HAL_RCC_WWDG_CLK_ENABLE().
- (+) Set the WWDG prescaler, refresh window and counter value
- using HAL_WWDG_Init() function.
- (+) Start the WWDG using HAL_WWDG_Start() function.
- When the WWDG is enabled the counter value should be configured to
- a value greater than 0x40 to prevent generating an immediate reset.
- (+) Optionally you can enable the Early Wakeup Interrupt (EWI) which is
- generated when the counter reaches 0x40, and then start the WWDG using
- HAL_WWDG_Start_IT(). At EWI HAL_WWDG_WakeupCallback is executed and user can
- add his own code by customization of function pointer HAL_WWDG_WakeupCallback
- Once enabled, EWI interrupt cannot be disabled except by a system reset.
- (+) Then the application program must refresh the WWDG counter at regular
- intervals during normal operation to prevent an MCU reset, using
- HAL_WWDG_Refresh() function. This operation must occur only when
- the counter is lower than the refresh window value already programmed.
-
- *** WWDG HAL driver macros list ***
- ==================================
- [..]
- Below the list of most used macros in WWDG HAL driver.
-
- (+) __HAL_WWDG_ENABLE: Enable the WWDG peripheral
- (+) __HAL_WWDG_GET_FLAG: Get the selected WWDG's flag status
- (+) __HAL_WWDG_CLEAR_FLAG: Clear the WWDG's pending flags
- (+) __HAL_WWDG_ENABLE_IT: Enables the WWDG early wake-up interrupt
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup WWDG WWDG
- * @brief WWDG HAL module driver.
- * @{
- */
-
-#ifdef HAL_WWDG_MODULE_ENABLED
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Exported functions --------------------------------------------------------*/
-/** @defgroup WWDG_Exported_Functions WWDG Exported Functions
- * @{
- */
-
-/** @defgroup WWDG_Exported_Functions_Group1 Initialization and de-initialization functions
- * @brief Initialization and Configuration functions.
- *
-@verbatim
- ==============================================================================
- ##### Initialization and de-initialization functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize the WWDG according to the specified parameters
- in the WWDG_InitTypeDef and create the associated handle
- (+) DeInitialize the WWDG peripheral
- (+) Initialize the WWDG MSP
- (+) DeInitialize the WWDG MSP
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the WWDG according to the specified
- * parameters in the WWDG_InitTypeDef and creates the associated handle.
- * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
- * the configuration information for the specified WWDG module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg)
-{
- /* Check the WWDG handle allocation */
- if(hwwdg == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance));
- assert_param(IS_WWDG_PRESCALER(hwwdg->Init.Prescaler));
- assert_param(IS_WWDG_WINDOW(hwwdg->Init.Window));
- assert_param(IS_WWDG_COUNTER(hwwdg->Init.Counter));
-
- if(hwwdg->State == HAL_WWDG_STATE_RESET)
- {
- /* Allocate lock resource and initialize it */
- hwwdg->Lock = HAL_UNLOCKED;
- /* Init the low level hardware */
- HAL_WWDG_MspInit(hwwdg);
- }
-
- /* Change WWDG peripheral state */
- hwwdg->State = HAL_WWDG_STATE_BUSY;
-
- /* Set WWDG Prescaler and Window */
- MODIFY_REG(hwwdg->Instance->CFR, (WWDG_CFR_WDGTB | WWDG_CFR_W), (hwwdg->Init.Prescaler | hwwdg->Init.Window));
- /* Set WWDG Counter */
- MODIFY_REG(hwwdg->Instance->CR, WWDG_CR_T, hwwdg->Init.Counter);
-
- /* Change WWDG peripheral state */
- hwwdg->State = HAL_WWDG_STATE_READY;
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the WWDG peripheral.
- * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
- * the configuration information for the specified WWDG module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_WWDG_DeInit(WWDG_HandleTypeDef *hwwdg)
-{
- /* Check the WWDG handle allocation */
- if(hwwdg == NULL)
- {
- return HAL_ERROR;
- }
-
- /* Check the parameters */
- assert_param(IS_WWDG_ALL_INSTANCE(hwwdg->Instance));
-
- /* Change WWDG peripheral state */
- hwwdg->State = HAL_WWDG_STATE_BUSY;
-
- /* DeInit the low level hardware */
- HAL_WWDG_MspDeInit(hwwdg);
-
- /* Reset WWDG Control register */
- hwwdg->Instance->CR = (uint32_t)0x0000007F;
-
- /* Reset WWDG Configuration register */
- hwwdg->Instance->CFR = (uint32_t)0x0000007F;
-
- /* Reset WWDG Status register */
- hwwdg->Instance->SR = 0;
-
- /* Change WWDG peripheral state */
- hwwdg->State = HAL_WWDG_STATE_RESET;
-
- /* Release Lock */
- __HAL_UNLOCK(hwwdg);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the WWDG MSP.
- * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
- * the configuration information for the specified WWDG module.
- * @retval None
- */
-__weak void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_WWDG_MspInit could be implemented in the user file
- */
-}
-
-/**
- * @brief DeInitializes the WWDG MSP.
- * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
- * the configuration information for the specified WWDG module.
- * @retval None
- */
-__weak void HAL_WWDG_MspDeInit(WWDG_HandleTypeDef *hwwdg)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_WWDG_MspDeInit could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup WWDG_Exported_Functions_Group2 IO operation functions
- * @brief IO operation functions
- *
-@verbatim
- ==============================================================================
- ##### IO operation functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Start the WWDG.
- (+) Refresh the WWDG.
- (+) Handle WWDG interrupt request.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Starts the WWDG.
- * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
- * the configuration information for the specified WWDG module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_WWDG_Start(WWDG_HandleTypeDef *hwwdg)
-{
- /* Process Locked */
- __HAL_LOCK(hwwdg);
-
- /* Change WWDG peripheral state */
- hwwdg->State = HAL_WWDG_STATE_BUSY;
-
- /* Enable the peripheral */
- __HAL_WWDG_ENABLE(hwwdg);
-
- /* Change WWDG peripheral state */
- hwwdg->State = HAL_WWDG_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hwwdg);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Starts the WWDG with interrupt enabled.
- * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
- * the configuration information for the specified WWDG module.
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_WWDG_Start_IT(WWDG_HandleTypeDef *hwwdg)
-{
- /* Process Locked */
- __HAL_LOCK(hwwdg);
-
- /* Change WWDG peripheral state */
- hwwdg->State = HAL_WWDG_STATE_BUSY;
-
- /* Enable the Early Wakeup Interrupt */
- __HAL_WWDG_ENABLE_IT(hwwdg, WWDG_IT_EWI);
-
- /* Enable the peripheral */
- __HAL_WWDG_ENABLE(hwwdg);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Refreshes the WWDG.
- * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
- * the configuration information for the specified WWDG module.
- * @param Counter: value of counter to put in WWDG counter
- * @retval HAL status
- */
-HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg, uint32_t Counter)
-{
- /* Process Locked */
- __HAL_LOCK(hwwdg);
-
- /* Change WWDG peripheral state */
- hwwdg->State = HAL_WWDG_STATE_BUSY;
-
- /* Check the parameters */
- assert_param(IS_WWDG_COUNTER(Counter));
-
- /* Write to WWDG CR the WWDG Counter value to refresh with */
- MODIFY_REG(hwwdg->Instance->CR, (uint32_t)WWDG_CR_T, Counter);
-
- /* Change WWDG peripheral state */
- hwwdg->State = HAL_WWDG_STATE_READY;
-
- /* Process Unlocked */
- __HAL_UNLOCK(hwwdg);
-
- /* Return function status */
- return HAL_OK;
-}
-
-/**
- * @brief Handles WWDG interrupt request.
- * @note The Early Wakeup Interrupt (EWI) can be used if specific safety operations
- * or data logging must be performed before the actual reset is generated.
- * The EWI interrupt is enabled using __HAL_WWDG_ENABLE_IT() macro.
- * When the downcounter reaches the value 0x40, and EWI interrupt is
- * generated and the corresponding Interrupt Service Routine (ISR) can
- * be used to trigger specific actions (such as communications or data
- * logging), before resetting the device.
- * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
- * the configuration information for the specified WWDG module.
- * @retval None
- */
-void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg)
-{
- /* Check if Early Wakeup Interrupt is enable */
- if(__HAL_WWDG_GET_IT_SOURCE(hwwdg, WWDG_IT_EWI) != RESET)
- {
- /* Check if WWDG Early Wakeup Interrupt occurred */
- if(__HAL_WWDG_GET_FLAG(hwwdg, WWDG_FLAG_EWIF) != RESET)
- {
- /* Early Wakeup callback */
- HAL_WWDG_WakeupCallback(hwwdg);
-
- /* Change WWDG peripheral state */
- hwwdg->State = HAL_WWDG_STATE_READY;
-
- /* Clear the WWDG Early Wakeup flag */
- __HAL_WWDG_CLEAR_FLAG(hwwdg, WWDG_FLAG_EWIF);
-
- /* Process Unlocked */
- __HAL_UNLOCK(hwwdg);
- }
- }
-}
-
-/**
- * @brief Early Wakeup WWDG callback.
- * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
- * the configuration information for the specified WWDG module.
- * @retval None
- */
-__weak void HAL_WWDG_WakeupCallback(WWDG_HandleTypeDef* hwwdg)
-{
- /* NOTE: This function Should not be modified, when the callback is needed,
- the HAL_WWDG_WakeupCallback could be implemented in the user file
- */
-}
-
-/**
- * @}
- */
-
-/** @defgroup WWDG_Exported_Functions_Group3 Peripheral State functions
- * @brief Peripheral State functions.
- *
-@verbatim
- ==============================================================================
- ##### Peripheral State functions #####
- ==============================================================================
- [..]
- This subsection permits to get in run-time the status of the peripheral
- and the data flow.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Returns the WWDG state.
- * @param hwwdg: pointer to a WWDG_HandleTypeDef structure that contains
- * the configuration information for the specified WWDG module.
- * @retval HAL state
- */
-HAL_WWDG_StateTypeDef HAL_WWDG_GetState(WWDG_HandleTypeDef *hwwdg)
-{
- return hwwdg->State;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* HAL_WWDG_MODULE_ENABLED */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmc.c
deleted file mode 100644
index cf0ce2a..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fmc.c
+++ /dev/null
@@ -1,1733 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_ll_fmc.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief FMC Low Layer HAL module driver.
- *
- * This file provides firmware functions to manage the following
- * functionalities of the Flexible Memory Controller (FMC) peripheral memories:
- * + Initialization/de-initialization functions
- * + Peripheral Control functions
- * + Peripheral State functions
- *
- @verbatim
- ==============================================================================
- ##### FMC peripheral features #####
- ==============================================================================
- [..] The Flexible memory controller (FMC) includes three memory controllers:
- (+) The NOR/PSRAM memory controller
- (+) The NAND/PC Card memory controller
- (+) The Synchronous DRAM (SDRAM) controller
-
- [..] The FMC functional block makes the interface with synchronous and asynchronous static
- memories, SDRAM memories, and 16-bit PC memory cards. Its main purposes are:
- (+) to translate AHB transactions into the appropriate external device protocol
- (+) to meet the access time requirements of the external memory devices
-
- [..] All external memories share the addresses, data and control signals with the controller.
- Each external device is accessed by means of a unique Chip Select. The FMC performs
- only one access at a time to an external device.
- The main features of the FMC controller are the following:
- (+) Interface with static-memory mapped devices including:
- (++) Static random access memory (SRAM)
- (++) Read-only memory (ROM)
- (++) NOR Flash memory/OneNAND Flash memory
- (++) PSRAM (4 memory banks)
- (++) 16-bit PC Card compatible devices
- (++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of
- data
- (+) Interface with synchronous DRAM (SDRAM) memories
- (+) Independent Chip Select control for each memory bank
- (+) Independent configuration for each memory bank
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup FMC_LL FMC Low Layer
- * @brief FMC driver modules
- * @{
- */
-
-#if defined (HAL_SRAM_MODULE_ENABLED) || defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED) || defined(HAL_PCCARD_MODULE_ENABLED) || defined(HAL_SDRAM_MODULE_ENABLED)
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/** @addtogroup FMC_LL_Private_Functions
- * @{
- */
-
-/** @addtogroup FMC_LL_NORSRAM
- * @brief NORSRAM Controller functions
- *
- @verbatim
- ==============================================================================
- ##### How to use NORSRAM device driver #####
- ==============================================================================
-
- [..]
- This driver contains a set of APIs to interface with the FMC NORSRAM banks in order
- to run the NORSRAM external devices.
-
- (+) FMC NORSRAM bank reset using the function FMC_NORSRAM_DeInit()
- (+) FMC NORSRAM bank control configuration using the function FMC_NORSRAM_Init()
- (+) FMC NORSRAM bank timing configuration using the function FMC_NORSRAM_Timing_Init()
- (+) FMC NORSRAM bank extended timing configuration using the function
- FMC_NORSRAM_Extended_Timing_Init()
- (+) FMC NORSRAM bank enable/disable write operation using the functions
- FMC_NORSRAM_WriteOperation_Enable()/FMC_NORSRAM_WriteOperation_Disable()
-
-
-@endverbatim
- * @{
- */
-
-/** @addtogroup FMC_LL_NORSRAM_Private_Functions_Group1
- * @brief Initialization and Configuration functions
- *
- @verbatim
- ==============================================================================
- ##### Initialization and de_initialization functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the FMC NORSRAM interface
- (+) De-initialize the FMC NORSRAM interface
- (+) Configure the FMC clock and associated GPIOs
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initialize the FMC_NORSRAM device according to the specified
- * control parameters in the FMC_NORSRAM_InitTypeDef
- * @param Device: Pointer to NORSRAM device instance
- * @param Init: Pointer to NORSRAM Initialization structure
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_InitTypeDef* Init)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FMC_NORSRAM_DEVICE(Device));
- assert_param(IS_FMC_NORSRAM_BANK(Init->NSBank));
- assert_param(IS_FMC_MUX(Init->DataAddressMux));
- assert_param(IS_FMC_MEMORY(Init->MemoryType));
- assert_param(IS_FMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth));
- assert_param(IS_FMC_BURSTMODE(Init->BurstAccessMode));
- assert_param(IS_FMC_WAIT_POLARITY(Init->WaitSignalPolarity));
-#if !defined (STM32F446xx)
- assert_param(IS_FMC_WRAP_MODE(Init->WrapMode));
-#endif /* !defined (STM32F446xx) */
- assert_param(IS_FMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive));
- assert_param(IS_FMC_WRITE_OPERATION(Init->WriteOperation));
- assert_param(IS_FMC_WAITE_SIGNAL(Init->WaitSignal));
- assert_param(IS_FMC_EXTENDED_MODE(Init->ExtendedMode));
- assert_param(IS_FMC_ASYNWAIT(Init->AsynchronousWait));
- assert_param(IS_FMC_WRITE_BURST(Init->WriteBurst));
- assert_param(IS_FMC_CONTINOUS_CLOCK(Init->ContinuousClock));
-#if defined (STM32F446xx)
- assert_param(IS_FMC_WRITE_FIFO(Init->WriteFifo));
- assert_param(IS_FMC_PAGESIZE(Init->PageSize));
-#endif /* defined (STM32F446xx) */
-
- /* Get the BTCR register value */
- tmpr = Device->BTCR[Init->NSBank];
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
- /* Clear MBKEN, MUXEN, MTYP, MWID, FACCEN, BURSTEN, WAITPOL, WRAPMOD, WAITCFG, WREN,
- WAITEN, EXTMOD, ASYNCWAIT, CBURSTRW and CCLKEN bits */
- tmpr &= ((uint32_t)~(FMC_BCR1_MBKEN | FMC_BCR1_MUXEN | FMC_BCR1_MTYP | \
- FMC_BCR1_MWID | FMC_BCR1_FACCEN | FMC_BCR1_BURSTEN | \
- FMC_BCR1_WAITPOL | FMC_BCR1_WRAPMOD | FMC_BCR1_WAITCFG | \
- FMC_BCR1_WREN | FMC_BCR1_WAITEN | FMC_BCR1_EXTMOD | \
- FMC_BCR1_ASYNCWAIT | FMC_BCR1_CBURSTRW | FMC_BCR1_CCLKEN));
-
- /* Set NORSRAM device control parameters */
- tmpr |= (uint32_t)(Init->DataAddressMux |\
- Init->MemoryType |\
- Init->MemoryDataWidth |\
- Init->BurstAccessMode |\
- Init->WaitSignalPolarity |\
- Init->WrapMode |\
- Init->WaitSignalActive |\
- Init->WriteOperation |\
- Init->WaitSignal |\
- Init->ExtendedMode |\
- Init->AsynchronousWait |\
- Init->WriteBurst |\
- Init->ContinuousClock);
-#else /* defined(STM32F446xx) */
- /* Clear MBKEN, MUXEN, MTYP, MWID, FACCEN, BURSTEN, WAITPOL, CPSIZE, WAITCFG, WREN,
- WAITEN, EXTMOD, ASYNCWAIT, CBURSTRW, CCLKEN and WFDIS bits */
- tmpr &= ((uint32_t)~(FMC_BCR1_MBKEN | FMC_BCR1_MUXEN | FMC_BCR1_MTYP | \
- FMC_BCR1_MWID | FMC_BCR1_FACCEN | FMC_BCR1_BURSTEN | \
- FMC_BCR1_WAITPOL | FMC_BCR1_WAITCFG | FMC_BCR1_CPSIZE | \
- FMC_BCR1_WREN | FMC_BCR1_WAITEN | FMC_BCR1_EXTMOD | \
- FMC_BCR1_ASYNCWAIT | FMC_BCR1_CBURSTRW | FMC_BCR1_CCLKEN | \
- FMC_BCR1_WFDIS));
-
- /* Set NORSRAM device control parameters */
- tmpr |= (uint32_t)(Init->DataAddressMux |\
- Init->MemoryType |\
- Init->MemoryDataWidth |\
- Init->BurstAccessMode |\
- Init->WaitSignalPolarity |\
- Init->WaitSignalActive |\
- Init->WriteOperation |\
- Init->WaitSignal |\
- Init->ExtendedMode |\
- Init->AsynchronousWait |\
- Init->WriteBurst |\
- Init->ContinuousClock |\
- Init->PageSize |\
- Init->WriteFifo);
-#endif /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
-
- if(Init->MemoryType == FMC_MEMORY_TYPE_NOR)
- {
- tmpr |= (uint32_t)FMC_NORSRAM_FLASH_ACCESS_ENABLE;
- }
-
- Device->BTCR[Init->NSBank] = tmpr;
-
- /* Configure synchronous mode when Continuous clock is enabled for bank2..4 */
- if((Init->ContinuousClock == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC) && (Init->NSBank != FMC_NORSRAM_BANK1))
- {
- Init->BurstAccessMode = FMC_BURST_ACCESS_MODE_ENABLE;
- Device->BTCR[FMC_NORSRAM_BANK1] |= (uint32_t)(Init->BurstAccessMode |\
- Init->ContinuousClock);
- }
-
-#if defined(STM32F446xx)
- if(Init->NSBank != FMC_NORSRAM_BANK1)
- {
- Device->BTCR[FMC_NORSRAM_BANK1] |= (uint32_t)(Init->WriteFifo);
- }
-#endif /* defined(STM32F446xx) */
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitialize the FMC_NORSRAM peripheral
- * @param Device: Pointer to NORSRAM device instance
- * @param ExDevice: Pointer to NORSRAM extended mode device instance
- * @param Bank: NORSRAM bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank)
-{
- /* Check the parameters */
- assert_param(IS_FMC_NORSRAM_DEVICE(Device));
- assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(ExDevice));
- assert_param(IS_FMC_NORSRAM_BANK(Bank));
-
- /* Disable the FMC_NORSRAM device */
- __FMC_NORSRAM_DISABLE(Device, Bank);
-
- /* De-initialize the FMC_NORSRAM device */
- /* FMC_NORSRAM_BANK1 */
- if(Bank == FMC_NORSRAM_BANK1)
- {
- Device->BTCR[Bank] = 0x000030DB;
- }
- /* FMC_NORSRAM_BANK2, FMC_NORSRAM_BANK3 or FMC_NORSRAM_BANK4 */
- else
- {
- Device->BTCR[Bank] = 0x000030D2;
- }
-
- Device->BTCR[Bank + 1] = 0x0FFFFFFF;
- ExDevice->BWTR[Bank] = 0x0FFFFFFF;
-
- return HAL_OK;
-}
-
-/**
- * @brief Initialize the FMC_NORSRAM Timing according to the specified
- * parameters in the FMC_NORSRAM_TimingTypeDef
- * @param Device: Pointer to NORSRAM device instance
- * @param Timing: Pointer to NORSRAM Timing structure
- * @param Bank: NORSRAM bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FMC_NORSRAM_DEVICE(Device));
- assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
- assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
- assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime));
- assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
- assert_param(IS_FMC_CLK_DIV(Timing->CLKDivision));
- assert_param(IS_FMC_DATA_LATENCY(Timing->DataLatency));
- assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode));
- assert_param(IS_FMC_NORSRAM_BANK(Bank));
-
- /* Get the BTCR register value */
- tmpr = Device->BTCR[Bank + 1];
-
- /* Clear ADDSET, ADDHLD, DATAST, BUSTURN, CLKDIV, DATLAT and ACCMOD bits */
- tmpr &= ((uint32_t)~(FMC_BTR1_ADDSET | FMC_BTR1_ADDHLD | FMC_BTR1_DATAST | \
- FMC_BTR1_BUSTURN | FMC_BTR1_CLKDIV | FMC_BTR1_DATLAT | \
- FMC_BTR1_ACCMOD));
-
- /* Set FMC_NORSRAM device timing parameters */
- tmpr |= (uint32_t)(Timing->AddressSetupTime |\
- ((Timing->AddressHoldTime) << 4) |\
- ((Timing->DataSetupTime) << 8) |\
- ((Timing->BusTurnAroundDuration) << 16) |\
- (((Timing->CLKDivision)-1) << 20) |\
- (((Timing->DataLatency)-2) << 24) |\
- (Timing->AccessMode));
-
- Device->BTCR[Bank + 1] = tmpr;
-
- /* Configure Clock division value (in NORSRAM bank 1) when continuous clock is enabled */
- if(HAL_IS_BIT_SET(Device->BTCR[FMC_NORSRAM_BANK1], FMC_BCR1_CCLKEN))
- {
- tmpr = (uint32_t)(Device->BTCR[FMC_NORSRAM_BANK1 + 1] & ~(((uint32_t)0x0F) << 20));
- tmpr |= (uint32_t)(((Timing->CLKDivision)-1) << 20);
- Device->BTCR[FMC_NORSRAM_BANK1 + 1] = tmpr;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Initialize the FMC_NORSRAM Extended mode Timing according to the specified
- * parameters in the FMC_NORSRAM_TimingTypeDef
- * @param Device: Pointer to NORSRAM device instance
- * @param Timing: Pointer to NORSRAM Timing structure
- * @param Bank: NORSRAM bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FMC_EXTENDED_MODE(ExtendedMode));
-
- /* Set NORSRAM device timing register for write configuration, if extended mode is used */
- if(ExtendedMode == FMC_EXTENDED_MODE_ENABLE)
- {
- /* Check the parameters */
- assert_param(IS_FMC_NORSRAM_EXTENDED_DEVICE(Device));
- assert_param(IS_FMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
- assert_param(IS_FMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
- assert_param(IS_FMC_DATASETUP_TIME(Timing->DataSetupTime));
- assert_param(IS_FMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
-#if !defined(STM32F446xx)
- assert_param(IS_FMC_CLK_DIV(Timing->CLKDivision));
- assert_param(IS_FMC_DATA_LATENCY(Timing->DataLatency));
-#endif /* !defined(STM32F446xx) */
- assert_param(IS_FMC_ACCESS_MODE(Timing->AccessMode));
- assert_param(IS_FMC_NORSRAM_BANK(Bank));
-
- /* Get the BWTR register value */
- tmpr = Device->BWTR[Bank];
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
- /* Clear ADDSET, ADDHLD, DATAST, BUSTURN, CLKDIV, DATLAT and ACCMOD bits */
- tmpr &= ((uint32_t)~(FMC_BWTR1_ADDSET | FMC_BWTR1_ADDHLD | FMC_BWTR1_DATAST | \
- FMC_BWTR1_BUSTURN | FMC_BWTR1_CLKDIV | FMC_BWTR1_DATLAT | \
- FMC_BWTR1_ACCMOD));
-
- tmpr |= (uint32_t)(Timing->AddressSetupTime |\
- ((Timing->AddressHoldTime) << 4) |\
- ((Timing->DataSetupTime) << 8) |\
- ((Timing->BusTurnAroundDuration) << 16) |\
- (((Timing->CLKDivision)-1) << 20) |\
- (((Timing->DataLatency)-2) << 24) |\
- (Timing->AccessMode));
-#else /* defined(STM32F446xx) */
- /* Clear ADDSET, ADDHLD, DATAST, BUSTURN and ACCMOD bits */
- tmpr &= ((uint32_t)~(FMC_BWTR1_ADDSET | FMC_BWTR1_ADDHLD | FMC_BWTR1_DATAST | \
- FMC_BWTR1_BUSTURN | FMC_BWTR1_ACCMOD));
-
- tmpr |= (uint32_t)(Timing->AddressSetupTime |\
- ((Timing->AddressHoldTime) << 4) |\
- ((Timing->DataSetupTime) << 8) |\
- ((Timing->BusTurnAroundDuration) << 16) |\
- (Timing->AccessMode));
-#endif /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
-
- Device->BWTR[Bank] = tmpr;
- }
- else
- {
- Device->BWTR[Bank] = 0x0FFFFFFF;
- }
-
- return HAL_OK;
-}
-/**
- * @}
- */
-
-/** @addtogroup FMC_LL_NORSRAM_Private_Functions_Group2
- * @brief management functions
- *
-@verbatim
- ==============================================================================
- ##### FMC_NORSRAM Control functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to control dynamically
- the FMC NORSRAM interface.
-
-@endverbatim
- * @{
- */
-/**
- * @brief Enables dynamically FMC_NORSRAM write operation.
- * @param Device: Pointer to NORSRAM device instance
- * @param Bank: NORSRAM bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank)
-{
- /* Check the parameters */
- assert_param(IS_FMC_NORSRAM_DEVICE(Device));
- assert_param(IS_FMC_NORSRAM_BANK(Bank));
-
- /* Enable write operation */
- Device->BTCR[Bank] |= FMC_WRITE_OPERATION_ENABLE;
-
- return HAL_OK;
-}
-
-/**
- * @brief Disables dynamically FMC_NORSRAM write operation.
- * @param Device: Pointer to NORSRAM device instance
- * @param Bank: NORSRAM bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank)
-{
- /* Check the parameters */
- assert_param(IS_FMC_NORSRAM_DEVICE(Device));
- assert_param(IS_FMC_NORSRAM_BANK(Bank));
-
- /* Disable write operation */
- Device->BTCR[Bank] &= ~FMC_WRITE_OPERATION_ENABLE;
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @addtogroup FMC_LL_NAND
- * @brief NAND Controller functions
- *
- @verbatim
- ==============================================================================
- ##### How to use NAND device driver #####
- ==============================================================================
- [..]
- This driver contains a set of APIs to interface with the FMC NAND banks in order
- to run the NAND external devices.
-
- (+) FMC NAND bank reset using the function FMC_NAND_DeInit()
- (+) FMC NAND bank control configuration using the function FMC_NAND_Init()
- (+) FMC NAND bank common space timing configuration using the function
- FMC_NAND_CommonSpace_Timing_Init()
- (+) FMC NAND bank attribute space timing configuration using the function
- FMC_NAND_AttributeSpace_Timing_Init()
- (+) FMC NAND bank enable/disable ECC correction feature using the functions
- FMC_NAND_ECC_Enable()/FMC_NAND_ECC_Disable()
- (+) FMC NAND bank get ECC correction code using the function FMC_NAND_GetECC()
-
-@endverbatim
- * @{
- */
-
-#if defined(STM32F446xx)
-/** @defgroup HAL_FMC_NAND_Group1 Initialization/de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ==============================================================================
- ##### Initialization and de_initialization functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the FMC NAND interface
- (+) De-initialize the FMC NAND interface
- (+) Configure the FMC clock and associated GPIOs
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the FMC_NAND device according to the specified
- * control parameters in the FMC_NAND_HandleTypeDef
- * @param Device: Pointer to NAND device instance
- * @param Init: Pointer to NAND Initialization structure
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FMC_NAND_DEVICE(Device));
- assert_param(IS_FMC_NAND_BANK(Init->NandBank));
- assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature));
- assert_param(IS_FMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth));
- assert_param(IS_FMC_ECC_STATE(Init->EccComputation));
- assert_param(IS_FMC_ECCPAGE_SIZE(Init->ECCPageSize));
- assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime));
- assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime));
-
- /* Get the NAND bank register value */
- tmpr = Device->PCR;
-
- /* Clear PWAITEN, PBKEN, PTYP, PWID, ECCEN, TCLR, TAR and ECCPS bits */
- tmpr &= ((uint32_t)~(FMC_PCR_PWAITEN | FMC_PCR_PBKEN | FMC_PCR_PTYP | \
- FMC_PCR_PWID | FMC_PCR_ECCEN | FMC_PCR_TCLR | \
- FMC_PCR_TAR | FMC_PCR_ECCPS));
-
- /* Set NAND device control parameters */
- tmpr |= (uint32_t)(Init->Waitfeature |\
- FMC_PCR_MEMORY_TYPE_NAND |\
- Init->MemoryDataWidth |\
- Init->EccComputation |\
- Init->ECCPageSize |\
- ((Init->TCLRSetupTime) << 9) |\
- ((Init->TARSetupTime) << 13));
-
- /* NAND bank registers configuration */
- Device->PCR = tmpr;
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the FMC_NAND Common space Timing according to the specified
- * parameters in the FMC_NAND_PCC_TimingTypeDef
- * @param Device: Pointer to NAND device instance
- * @param Timing: Pointer to NAND timing structure
- * @param Bank: NAND bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FMC_NAND_DEVICE(Device));
- assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
- assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
- assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
- assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
- assert_param(IS_FMC_NAND_BANK(Bank));
-
- /* Get the NAND bank 2 register value */
- tmpr = Device->PMEM;
-
-
- /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */
- tmpr &= ((uint32_t)~(FMC_PMEM_MEMSET2 | FMC_PMEM_MEMWAIT2 | FMC_PMEM_MEMHOLD2 | \
- FMC_PMEM_MEMHIZ2));
-
- /* Set FMC_NAND device timing parameters */
- tmpr |= (uint32_t)(Timing->SetupTime |\
- ((Timing->WaitSetupTime) << 8) |\
- ((Timing->HoldSetupTime) << 16) |\
- ((Timing->HiZSetupTime) << 24)
- );
-
- /* NAND bank registers configuration */
- Device->PMEM = tmpr;
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the FMC_NAND Attribute space Timing according to the specified
- * parameters in the FMC_NAND_PCC_TimingTypeDef
- * @param Device: Pointer to NAND device instance
- * @param Timing: Pointer to NAND timing structure
- * @param Bank: NAND bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FMC_NAND_DEVICE(Device));
- assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
- assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
- assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
- assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
- assert_param(IS_FMC_NAND_BANK(Bank));
-
- /* Get the NAND bank register value */
- tmpr = Device->PATT;
-
- /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */
- tmpr &= ((uint32_t)~(FMC_PATT_ATTSET2 | FMC_PATT_ATTWAIT2 | FMC_PATT_ATTHOLD2 | \
- FMC_PATT_ATTHIZ2));
-
- /* Set FMC_NAND device timing parameters */
- tmpr |= (uint32_t)(Timing->SetupTime |\
- ((Timing->WaitSetupTime) << 8) |\
- ((Timing->HoldSetupTime) << 16) |\
- ((Timing->HiZSetupTime) << 24));
-
- /* NAND bank registers configuration */
- Device->PATT = tmpr;
-
- return HAL_OK;
-}
-
-
-/**
- * @brief DeInitializes the FMC_NAND device
- * @param Device: Pointer to NAND device instance
- * @param Bank: NAND bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank)
-{
- /* Check the parameters */
- assert_param(IS_FMC_NAND_DEVICE(Device));
- assert_param(IS_FMC_NAND_BANK(Bank));
-
- /* Disable the NAND Bank */
- __FMC_NAND_DISABLE(Device, Bank);
-
- /* De-initialize the NAND Bank */
- /* Set the FMC_NAND_BANK registers to their reset values */
- Device->PCR = 0x00000018;
- Device->SR = 0x00000040;
- Device->PMEM = 0xFCFCFCFC;
- Device->PATT = 0xFCFCFCFC;
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-
-/** @defgroup HAL_FMC_NAND_Group2 Control functions
- * @brief management functions
- *
-@verbatim
- ==============================================================================
- ##### FMC_NAND Control functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to control dynamically
- the FMC NAND interface.
-
-@endverbatim
- * @{
- */
-
-
-/**
- * @brief Enables dynamically FMC_NAND ECC feature.
- * @param Device: Pointer to NAND device instance
- * @param Bank: NAND bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank)
-{
- /* Check the parameters */
- assert_param(IS_FMC_NAND_DEVICE(Device));
- assert_param(IS_FMC_NAND_BANK(Bank));
-
- /* Enable ECC feature */
- Device->PCR |= FMC_PCR_ECCEN;
-
- return HAL_OK;
-}
-
-
-/**
- * @brief Disables dynamically FMC_NAND ECC feature.
- * @param Device: Pointer to NAND device instance
- * @param Bank: NAND bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank)
-{
- /* Check the parameters */
- assert_param(IS_FMC_NAND_DEVICE(Device));
- assert_param(IS_FMC_NAND_BANK(Bank));
-
- /* Disable ECC feature */
- Device->PCR &= ~FMC_PCR_ECCEN;
-
- return HAL_OK;
-}
-
-/**
- * @brief Disables dynamically FMC_NAND ECC feature.
- * @param Device: Pointer to NAND device instance
- * @param ECCval: Pointer to ECC value
- * @param Bank: NAND bank number
- * @param Timeout: Timeout wait value
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Check the parameters */
- assert_param(IS_FMC_NAND_DEVICE(Device));
- assert_param(IS_FMC_NAND_BANK(Bank));
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait until FIFO is empty */
- while(__FMC_NAND_GET_FLAG(Device, Bank, FMC_FLAG_FEMPT) == RESET)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- return HAL_TIMEOUT;
- }
- }
- }
-
- /* Get the ECCR register value */
- *ECCval = (uint32_t)Device->ECCR;
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-#else /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */
-/** @defgroup HAL_FMC_NAND_Group1 Initialization/de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ==============================================================================
- ##### Initialization and de_initialization functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the FMC NAND interface
- (+) De-initialize the FMC NAND interface
- (+) Configure the FMC clock and associated GPIOs
-
-@endverbatim
- * @{
- */
-/**
- * @brief Initializes the FMC_NAND device according to the specified
- * control parameters in the FMC_NAND_HandleTypeDef
- * @param Device: Pointer to NAND device instance
- * @param Init: Pointer to NAND Initialization structure
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FMC_NAND_DEVICE(Device));
- assert_param(IS_FMC_NAND_BANK(Init->NandBank));
- assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature));
- assert_param(IS_FMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth));
- assert_param(IS_FMC_ECC_STATE(Init->EccComputation));
- assert_param(IS_FMC_ECCPAGE_SIZE(Init->ECCPageSize));
- assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime));
- assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime));
-
- if(Init->NandBank == FMC_NAND_BANK2)
- {
- /* Get the NAND bank 2 register value */
- tmpr = Device->PCR2;
- }
- else
- {
- /* Get the NAND bank 3 register value */
- tmpr = Device->PCR3;
- }
-
- /* Clear PWAITEN, PBKEN, PTYP, PWID, ECCEN, TCLR, TAR and ECCPS bits */
- tmpr &= ((uint32_t)~(FMC_PCR2_PWAITEN | FMC_PCR2_PBKEN | FMC_PCR2_PTYP | \
- FMC_PCR2_PWID | FMC_PCR2_ECCEN | FMC_PCR2_TCLR | \
- FMC_PCR2_TAR | FMC_PCR2_ECCPS));
-
- /* Set NAND device control parameters */
- tmpr |= (uint32_t)(Init->Waitfeature |\
- FMC_PCR_MEMORY_TYPE_NAND |\
- Init->MemoryDataWidth |\
- Init->EccComputation |\
- Init->ECCPageSize |\
- ((Init->TCLRSetupTime) << 9) |\
- ((Init->TARSetupTime) << 13));
-
- if(Init->NandBank == FMC_NAND_BANK2)
- {
- /* NAND bank 2 registers configuration */
- Device->PCR2 = tmpr;
- }
- else
- {
- /* NAND bank 3 registers configuration */
- Device->PCR3 = tmpr;
- }
-
- return HAL_OK;
-
-}
-
-/**
- * @brief Initializes the FMC_NAND Common space Timing according to the specified
- * parameters in the FMC_NAND_PCC_TimingTypeDef
- * @param Device: Pointer to NAND device instance
- * @param Timing: Pointer to NAND timing structure
- * @param Bank: NAND bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FMC_NAND_DEVICE(Device));
- assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
- assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
- assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
- assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
- assert_param(IS_FMC_NAND_BANK(Bank));
-
- if(Bank == FMC_NAND_BANK2)
- {
- /* Get the NAND bank 2 register value */
- tmpr = Device->PMEM2;
- }
- else
- {
- /* Get the NAND bank 3 register value */
- tmpr = Device->PMEM3;
- }
-
- /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */
- tmpr &= ((uint32_t)~(FMC_PMEM2_MEMSET2 | FMC_PMEM2_MEMWAIT2 | FMC_PMEM2_MEMHOLD2 | \
- FMC_PMEM2_MEMHIZ2));
-
- /* Set FMC_NAND device timing parameters */
- tmpr |= (uint32_t)(Timing->SetupTime |\
- ((Timing->WaitSetupTime) << 8) |\
- ((Timing->HoldSetupTime) << 16) |\
- ((Timing->HiZSetupTime) << 24)
- );
-
- if(Bank == FMC_NAND_BANK2)
- {
- /* NAND bank 2 registers configuration */
- Device->PMEM2 = tmpr;
- }
- else
- {
- /* NAND bank 3 registers configuration */
- Device->PMEM3 = tmpr;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the FMC_NAND Attribute space Timing according to the specified
- * parameters in the FMC_NAND_PCC_TimingTypeDef
- * @param Device: Pointer to NAND device instance
- * @param Timing: Pointer to NAND timing structure
- * @param Bank: NAND bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FMC_NAND_DEVICE(Device));
- assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
- assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
- assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
- assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
- assert_param(IS_FMC_NAND_BANK(Bank));
-
- if(Bank == FMC_NAND_BANK2)
- {
- /* Get the NAND bank 2 register value */
- tmpr = Device->PATT2;
- }
- else
- {
- /* Get the NAND bank 3 register value */
- tmpr = Device->PATT3;
- }
-
- /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */
- tmpr &= ((uint32_t)~(FMC_PATT2_ATTSET2 | FMC_PATT2_ATTWAIT2 | FMC_PATT2_ATTHOLD2 | \
- FMC_PATT2_ATTHIZ2));
-
- /* Set FMC_NAND device timing parameters */
- tmpr |= (uint32_t)(Timing->SetupTime |\
- ((Timing->WaitSetupTime) << 8) |\
- ((Timing->HoldSetupTime) << 16) |\
- ((Timing->HiZSetupTime) << 24));
-
- if(Bank == FMC_NAND_BANK2)
- {
- /* NAND bank 2 registers configuration */
- Device->PATT2 = tmpr;
- }
- else
- {
- /* NAND bank 3 registers configuration */
- Device->PATT3 = tmpr;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the FMC_NAND device
- * @param Device: Pointer to NAND device instance
- * @param Bank: NAND bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank)
-{
- /* Check the parameters */
- assert_param(IS_FMC_NAND_DEVICE(Device));
- assert_param(IS_FMC_NAND_BANK(Bank));
-
- /* Disable the NAND Bank */
- __FMC_NAND_DISABLE(Device, Bank);
-
- /* De-initialize the NAND Bank */
- if(Bank == FMC_NAND_BANK2)
- {
- /* Set the FMC_NAND_BANK2 registers to their reset values */
- Device->PCR2 = 0x00000018;
- Device->SR2 = 0x00000040;
- Device->PMEM2 = 0xFCFCFCFC;
- Device->PATT2 = 0xFCFCFCFC;
- }
- /* FMC_Bank3_NAND */
- else
- {
- /* Set the FMC_NAND_BANK3 registers to their reset values */
- Device->PCR3 = 0x00000018;
- Device->SR3 = 0x00000040;
- Device->PMEM3 = 0xFCFCFCFC;
- Device->PATT3 = 0xFCFCFCFC;
- }
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @addtogroup FMC_LL_NAND_Private_Functions_Group2
- * @brief management functions
- *
-@verbatim
- ==============================================================================
- ##### FMC_NAND Control functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to control dynamically
- the FMC NAND interface.
-
-@endverbatim
- * @{
- */
-/**
- * @brief Enables dynamically FMC_NAND ECC feature.
- * @param Device: Pointer to NAND device instance
- * @param Bank: NAND bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank)
-{
- /* Check the parameters */
- assert_param(IS_FMC_NAND_DEVICE(Device));
- assert_param(IS_FMC_NAND_BANK(Bank));
-
- /* Enable ECC feature */
- if(Bank == FMC_NAND_BANK2)
- {
- Device->PCR2 |= FMC_PCR2_ECCEN;
- }
- else
- {
- Device->PCR3 |= FMC_PCR3_ECCEN;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Disables dynamically FMC_NAND ECC feature.
- * @param Device: Pointer to NAND device instance
- * @param Bank: NAND bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank)
-{
- /* Check the parameters */
- assert_param(IS_FMC_NAND_DEVICE(Device));
- assert_param(IS_FMC_NAND_BANK(Bank));
-
- /* Disable ECC feature */
- if(Bank == FMC_NAND_BANK2)
- {
- Device->PCR2 &= ~FMC_PCR2_ECCEN;
- }
- else
- {
- Device->PCR3 &= ~FMC_PCR3_ECCEN;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Disables dynamically FMC_NAND ECC feature.
- * @param Device: Pointer to NAND device instance
- * @param ECCval: Pointer to ECC value
- * @param Bank: NAND bank number
- * @param Timeout: Timeout wait value
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Check the parameters */
- assert_param(IS_FMC_NAND_DEVICE(Device));
- assert_param(IS_FMC_NAND_BANK(Bank));
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait until FIFO is empty */
- while(__FMC_NAND_GET_FLAG(Device, Bank, FMC_FLAG_FEMPT) == RESET)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- return HAL_TIMEOUT;
- }
- }
- }
-
- if(Bank == FMC_NAND_BANK2)
- {
- /* Get the ECCR2 register value */
- *ECCval = (uint32_t)Device->ECCR2;
- }
- else
- {
- /* Get the ECCR3 register value */
- *ECCval = (uint32_t)Device->ECCR3;
- }
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-#endif /* defined(STM32F446xx) */
-/**
- * @}
- */
-
-#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
-/** @addtogroup FMC_LL_PCCARD
- * @brief PCCARD Controller functions
- *
- @verbatim
- ==============================================================================
- ##### How to use PCCARD device driver #####
- ==============================================================================
- [..]
- This driver contains a set of APIs to interface with the FMC PCCARD bank in order
- to run the PCCARD/compact flash external devices.
-
- (+) FMC PCCARD bank reset using the function FMC_PCCARD_DeInit()
- (+) FMC PCCARD bank control configuration using the function FMC_PCCARD_Init()
- (+) FMC PCCARD bank common space timing configuration using the function
- FMC_PCCARD_CommonSpace_Timing_Init()
- (+) FMC PCCARD bank attribute space timing configuration using the function
- FMC_PCCARD_AttributeSpace_Timing_Init()
- (+) FMC PCCARD bank IO space timing configuration using the function
- FMC_PCCARD_IOSpace_Timing_Init()
-@endverbatim
- * @{
- */
-
-/** @addtogroup FMC_LL_PCCARD_Private_Functions_Group1
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ==============================================================================
- ##### Initialization and de_initialization functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the FMC PCCARD interface
- (+) De-initialize the FMC PCCARD interface
- (+) Configure the FMC clock and associated GPIOs
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the FMC_PCCARD device according to the specified
- * control parameters in the FMC_PCCARD_HandleTypeDef
- * @param Device: Pointer to PCCARD device instance
- * @param Init: Pointer to PCCARD Initialization structure
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_PCCARD_Init(FMC_PCCARD_TypeDef *Device, FMC_PCCARD_InitTypeDef *Init)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FMC_PCCARD_DEVICE(Device));
- assert_param(IS_FMC_WAIT_FEATURE(Init->Waitfeature));
- assert_param(IS_FMC_TCLR_TIME(Init->TCLRSetupTime));
- assert_param(IS_FMC_TAR_TIME(Init->TARSetupTime));
-
- /* Get PCCARD control register value */
- tmpr = Device->PCR4;
-
- /* Clear TAR, TCLR, PWAITEN and PWID bits */
- tmpr &= ((uint32_t)~(FMC_PCR4_TAR | FMC_PCR4_TCLR | FMC_PCR4_PWAITEN | \
- FMC_PCR4_PWID));
-
- /* Set FMC_PCCARD device control parameters */
- tmpr |= (uint32_t)(Init->Waitfeature |\
- FMC_NAND_PCC_MEM_BUS_WIDTH_16 |\
- (Init->TCLRSetupTime << 9) |\
- (Init->TARSetupTime << 13));
-
- Device->PCR4 = tmpr;
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the FMC_PCCARD Common space Timing according to the specified
- * parameters in the FMC_NAND_PCC_TimingTypeDef
- * @param Device: Pointer to PCCARD device instance
- * @param Timing: Pointer to PCCARD timing structure
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_PCCARD_CommonSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FMC_PCCARD_DEVICE(Device));
- assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
- assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
- assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
- assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
-
- /* Get PCCARD common space timing register value */
- tmpr = Device->PMEM4;
-
- /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */
- tmpr &= ((uint32_t)~(FMC_PMEM4_MEMSET4 | FMC_PMEM4_MEMWAIT4 | FMC_PMEM4_MEMHOLD4 | \
- FMC_PMEM4_MEMHIZ4));
- /* Set PCCARD timing parameters */
- tmpr |= (uint32_t)(Timing->SetupTime |\
- ((Timing->WaitSetupTime) << 8) |\
- ((Timing->HoldSetupTime) << 16) |\
- ((Timing->HiZSetupTime) << 24));
-
- Device->PMEM4 = tmpr;
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the FMC_PCCARD Attribute space Timing according to the specified
- * parameters in the FMC_NAND_PCC_TimingTypeDef
- * @param Device: Pointer to PCCARD device instance
- * @param Timing: Pointer to PCCARD timing structure
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_PCCARD_AttributeSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FMC_PCCARD_DEVICE(Device));
- assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
- assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
- assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
- assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
-
- /* Get PCCARD timing parameters */
- tmpr = Device->PATT4;
-
- /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */
- tmpr &= ((uint32_t)~(FMC_PATT4_ATTSET4 | FMC_PATT4_ATTWAIT4 | FMC_PATT4_ATTHOLD4 | \
- FMC_PATT4_ATTHIZ4));
-
- /* Set PCCARD timing parameters */
- tmpr |= (uint32_t)(Timing->SetupTime |\
- ((Timing->WaitSetupTime) << 8) |\
- ((Timing->HoldSetupTime) << 16) |\
- ((Timing->HiZSetupTime) << 24));
- Device->PATT4 = tmpr;
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the FMC_PCCARD IO space Timing according to the specified
- * parameters in the FMC_NAND_PCC_TimingTypeDef
- * @param Device: Pointer to PCCARD device instance
- * @param Timing: Pointer to PCCARD timing structure
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_PCCARD_IOSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FMC_PCCARD_DEVICE(Device));
- assert_param(IS_FMC_SETUP_TIME(Timing->SetupTime));
- assert_param(IS_FMC_WAIT_TIME(Timing->WaitSetupTime));
- assert_param(IS_FMC_HOLD_TIME(Timing->HoldSetupTime));
- assert_param(IS_FMC_HIZ_TIME(Timing->HiZSetupTime));
-
- /* Get FMC_PCCARD device timing parameters */
- tmpr = Device->PIO4;
-
- /* Clear IOSET4, IOWAIT4, IOHOLD4 and IOHIZ4 bits */
- tmpr &= ((uint32_t)~(FMC_PIO4_IOSET4 | FMC_PIO4_IOWAIT4 | FMC_PIO4_IOHOLD4 | \
- FMC_PIO4_IOHIZ4));
-
- /* Set FMC_PCCARD device timing parameters */
- tmpr |= (uint32_t)(Timing->SetupTime |\
- ((Timing->WaitSetupTime) << 8) |\
- ((Timing->HoldSetupTime) << 16) |\
- ((Timing->HiZSetupTime) << 24));
-
- Device->PIO4 = tmpr;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the FMC_PCCARD device
- * @param Device: Pointer to PCCARD device instance
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_PCCARD_DeInit(FMC_PCCARD_TypeDef *Device)
-{
- /* Check the parameters */
- assert_param(IS_FMC_PCCARD_DEVICE(Device));
-
- /* Disable the FMC_PCCARD device */
- __FMC_PCCARD_DISABLE(Device);
-
- /* De-initialize the FMC_PCCARD device */
- Device->PCR4 = 0x00000018;
- Device->SR4 = 0x00000000;
- Device->PMEM4 = 0xFCFCFCFC;
- Device->PATT4 = 0xFCFCFCFC;
- Device->PIO4 = 0xFCFCFCFC;
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
-
-
-/** @addtogroup FMC_LL_SDRAM
- * @brief SDRAM Controller functions
- *
- @verbatim
- ==============================================================================
- ##### How to use SDRAM device driver #####
- ==============================================================================
- [..]
- This driver contains a set of APIs to interface with the FMC SDRAM banks in order
- to run the SDRAM external devices.
-
- (+) FMC SDRAM bank reset using the function FMC_SDRAM_DeInit()
- (+) FMC SDRAM bank control configuration using the function FMC_SDRAM_Init()
- (+) FMC SDRAM bank timing configuration using the function FMC_SDRAM_Timing_Init()
- (+) FMC SDRAM bank enable/disable write operation using the functions
- FMC_SDRAM_WriteOperation_Enable()/FMC_SDRAM_WriteOperation_Disable()
- (+) FMC SDRAM bank send command using the function FMC_SDRAM_SendCommand()
-
-@endverbatim
- * @{
- */
-
-/** @addtogroup FMC_LL_SDRAM_Private_Functions_Group1
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ==============================================================================
- ##### Initialization and de_initialization functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the FMC SDRAM interface
- (+) De-initialize the FMC SDRAM interface
- (+) Configure the FMC clock and associated GPIOs
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the FMC_SDRAM device according to the specified
- * control parameters in the FMC_SDRAM_InitTypeDef
- * @param Device: Pointer to SDRAM device instance
- * @param Init: Pointer to SDRAM Initialization structure
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init)
-{
- uint32_t tmpr1 = 0;
- uint32_t tmpr2 = 0;
-
- /* Check the parameters */
- assert_param(IS_FMC_SDRAM_DEVICE(Device));
- assert_param(IS_FMC_SDRAM_BANK(Init->SDBank));
- assert_param(IS_FMC_COLUMNBITS_NUMBER(Init->ColumnBitsNumber));
- assert_param(IS_FMC_ROWBITS_NUMBER(Init->RowBitsNumber));
- assert_param(IS_FMC_SDMEMORY_WIDTH(Init->MemoryDataWidth));
- assert_param(IS_FMC_INTERNALBANK_NUMBER(Init->InternalBankNumber));
- assert_param(IS_FMC_CAS_LATENCY(Init->CASLatency));
- assert_param(IS_FMC_WRITE_PROTECTION(Init->WriteProtection));
- assert_param(IS_FMC_SDCLOCK_PERIOD(Init->SDClockPeriod));
- assert_param(IS_FMC_READ_BURST(Init->ReadBurst));
- assert_param(IS_FMC_READPIPE_DELAY(Init->ReadPipeDelay));
-
- /* Set SDRAM bank configuration parameters */
- if (Init->SDBank != FMC_SDRAM_BANK2)
- {
- tmpr1 = Device->SDCR[FMC_SDRAM_BANK1];
-
- /* Clear NC, NR, MWID, NB, CAS, WP, SDCLK, RBURST, and RPIPE bits */
- tmpr1 &= ((uint32_t)~(FMC_SDCR1_NC | FMC_SDCR1_NR | FMC_SDCR1_MWID | \
- FMC_SDCR1_NB | FMC_SDCR1_CAS | FMC_SDCR1_WP | \
- FMC_SDCR1_SDCLK | FMC_SDCR1_RBURST | FMC_SDCR1_RPIPE));
-
-
- tmpr1 |= (uint32_t)(Init->ColumnBitsNumber |\
- Init->RowBitsNumber |\
- Init->MemoryDataWidth |\
- Init->InternalBankNumber |\
- Init->CASLatency |\
- Init->WriteProtection |\
- Init->SDClockPeriod |\
- Init->ReadBurst |\
- Init->ReadPipeDelay
- );
- Device->SDCR[FMC_SDRAM_BANK1] = tmpr1;
- }
- else /* FMC_Bank2_SDRAM */
- {
- tmpr1 = Device->SDCR[FMC_SDRAM_BANK1];
-
- /* Clear NC, NR, MWID, NB, CAS, WP, SDCLK, RBURST, and RPIPE bits */
- tmpr1 &= ((uint32_t)~(FMC_SDCR1_NC | FMC_SDCR1_NR | FMC_SDCR1_MWID | \
- FMC_SDCR1_NB | FMC_SDCR1_CAS | FMC_SDCR1_WP | \
- FMC_SDCR1_SDCLK | FMC_SDCR1_RBURST | FMC_SDCR1_RPIPE));
-
- tmpr1 |= (uint32_t)(Init->SDClockPeriod |\
- Init->ReadBurst |\
- Init->ReadPipeDelay);
-
- tmpr2 = Device->SDCR[FMC_SDRAM_BANK2];
-
- /* Clear NC, NR, MWID, NB, CAS, WP, SDCLK, RBURST, and RPIPE bits */
- tmpr2 &= ((uint32_t)~(FMC_SDCR1_NC | FMC_SDCR1_NR | FMC_SDCR1_MWID | \
- FMC_SDCR1_NB | FMC_SDCR1_CAS | FMC_SDCR1_WP | \
- FMC_SDCR1_SDCLK | FMC_SDCR1_RBURST | FMC_SDCR1_RPIPE));
-
- tmpr2 |= (uint32_t)(Init->ColumnBitsNumber |\
- Init->RowBitsNumber |\
- Init->MemoryDataWidth |\
- Init->InternalBankNumber |\
- Init->CASLatency |\
- Init->WriteProtection);
-
- Device->SDCR[FMC_SDRAM_BANK1] = tmpr1;
- Device->SDCR[FMC_SDRAM_BANK2] = tmpr2;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the FMC_SDRAM device timing according to the specified
- * parameters in the FMC_SDRAM_TimingTypeDef
- * @param Device: Pointer to SDRAM device instance
- * @param Timing: Pointer to SDRAM Timing structure
- * @param Bank: SDRAM bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank)
-{
- uint32_t tmpr1 = 0;
- uint32_t tmpr2 = 0;
-
- /* Check the parameters */
- assert_param(IS_FMC_SDRAM_DEVICE(Device));
- assert_param(IS_FMC_LOADTOACTIVE_DELAY(Timing->LoadToActiveDelay));
- assert_param(IS_FMC_EXITSELFREFRESH_DELAY(Timing->ExitSelfRefreshDelay));
- assert_param(IS_FMC_SELFREFRESH_TIME(Timing->SelfRefreshTime));
- assert_param(IS_FMC_ROWCYCLE_DELAY(Timing->RowCycleDelay));
- assert_param(IS_FMC_WRITE_RECOVERY_TIME(Timing->WriteRecoveryTime));
- assert_param(IS_FMC_RP_DELAY(Timing->RPDelay));
- assert_param(IS_FMC_RCD_DELAY(Timing->RCDDelay));
- assert_param(IS_FMC_SDRAM_BANK(Bank));
-
- /* Set SDRAM device timing parameters */
- if (Bank != FMC_SDRAM_BANK2)
- {
- tmpr1 = Device->SDTR[FMC_SDRAM_BANK1];
-
- /* Clear TMRD, TXSR, TRAS, TRC, TWR, TRP and TRCD bits */
- tmpr1 &= ((uint32_t)~(FMC_SDTR1_TMRD | FMC_SDTR1_TXSR | FMC_SDTR1_TRAS | \
- FMC_SDTR1_TRC | FMC_SDTR1_TWR | FMC_SDTR1_TRP | \
- FMC_SDTR1_TRCD));
-
- tmpr1 |= (uint32_t)(((Timing->LoadToActiveDelay)-1) |\
- (((Timing->ExitSelfRefreshDelay)-1) << 4) |\
- (((Timing->SelfRefreshTime)-1) << 8) |\
- (((Timing->RowCycleDelay)-1) << 12) |\
- (((Timing->WriteRecoveryTime)-1) <<16) |\
- (((Timing->RPDelay)-1) << 20) |\
- (((Timing->RCDDelay)-1) << 24));
- Device->SDTR[FMC_SDRAM_BANK1] = tmpr1;
- }
- else /* FMC_Bank2_SDRAM */
- {
- tmpr1 = Device->SDTR[FMC_SDRAM_BANK2];
-
- /* Clear TMRD, TXSR, TRAS, TRC, TWR, TRP and TRCD bits */
- tmpr1 &= ((uint32_t)~(FMC_SDTR1_TMRD | FMC_SDTR1_TXSR | FMC_SDTR1_TRAS | \
- FMC_SDTR1_TRC | FMC_SDTR1_TWR | FMC_SDTR1_TRP | \
- FMC_SDTR1_TRCD));
-
- tmpr1 |= (uint32_t)(((Timing->LoadToActiveDelay)-1) |\
- (((Timing->ExitSelfRefreshDelay)-1) << 4) |\
- (((Timing->SelfRefreshTime)-1) << 8) |\
- (((Timing->WriteRecoveryTime)-1) <<16) |\
- (((Timing->RCDDelay)-1) << 24));
-
- tmpr2 = Device->SDTR[FMC_SDRAM_BANK1];
-
- /* Clear TMRD, TXSR, TRAS, TRC, TWR, TRP and TRCD bits */
- tmpr2 &= ((uint32_t)~(FMC_SDTR1_TMRD | FMC_SDTR1_TXSR | FMC_SDTR1_TRAS | \
- FMC_SDTR1_TRC | FMC_SDTR1_TWR | FMC_SDTR1_TRP | \
- FMC_SDTR1_TRCD));
- tmpr2 |= (uint32_t)((((Timing->RowCycleDelay)-1) << 12) |\
- (((Timing->RPDelay)-1) << 20));
-
- Device->SDTR[FMC_SDRAM_BANK2] = tmpr1;
- Device->SDTR[FMC_SDRAM_BANK1] = tmpr2;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the FMC_SDRAM peripheral
- * @param Device: Pointer to SDRAM device instance
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank)
-{
- /* Check the parameters */
- assert_param(IS_FMC_SDRAM_DEVICE(Device));
- assert_param(IS_FMC_SDRAM_BANK(Bank));
-
- /* De-initialize the SDRAM device */
- Device->SDCR[Bank] = 0x000002D0;
- Device->SDTR[Bank] = 0x0FFFFFFF;
- Device->SDCMR = 0x00000000;
- Device->SDRTR = 0x00000000;
- Device->SDSR = 0x00000000;
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @addtogroup FMC_LL_SDRAMPrivate_Functions_Group2
- * @brief management functions
- *
-@verbatim
- ==============================================================================
- ##### FMC_SDRAM Control functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to control dynamically
- the FMC SDRAM interface.
-
-@endverbatim
- * @{
- */
-/**
- * @brief Enables dynamically FMC_SDRAM write protection.
- * @param Device: Pointer to SDRAM device instance
- * @param Bank: SDRAM bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank)
-{
- /* Check the parameters */
- assert_param(IS_FMC_SDRAM_DEVICE(Device));
- assert_param(IS_FMC_SDRAM_BANK(Bank));
-
- /* Enable write protection */
- Device->SDCR[Bank] |= FMC_SDRAM_WRITE_PROTECTION_ENABLE;
-
- return HAL_OK;
-}
-
-/**
- * @brief Disables dynamically FMC_SDRAM write protection.
- * @param hsdram: FMC_SDRAM handle
- * @retval HAL status
- */
-HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank)
-{
- /* Check the parameters */
- assert_param(IS_FMC_SDRAM_DEVICE(Device));
- assert_param(IS_FMC_SDRAM_BANK(Bank));
-
- /* Disable write protection */
- Device->SDCR[Bank] &= ~FMC_SDRAM_WRITE_PROTECTION_ENABLE;
-
- return HAL_OK;
-}
-
-/**
- * @brief Send Command to the FMC SDRAM bank
- * @param Device: Pointer to SDRAM device instance
- * @param Command: Pointer to SDRAM command structure
- * @param Timing: Pointer to SDRAM Timing structure
- * @param Timeout: Timeout wait value
- * @retval HAL state
- */
-HAL_StatusTypeDef FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout)
-{
- __IO uint32_t tmpr = 0;
- uint32_t tickstart = 0;
-
- /* Check the parameters */
- assert_param(IS_FMC_SDRAM_DEVICE(Device));
- assert_param(IS_FMC_COMMAND_MODE(Command->CommandMode));
- assert_param(IS_FMC_COMMAND_TARGET(Command->CommandTarget));
- assert_param(IS_FMC_AUTOREFRESH_NUMBER(Command->AutoRefreshNumber));
- assert_param(IS_FMC_MODE_REGISTER(Command->ModeRegisterDefinition));
-
- /* Set command register */
- tmpr = (uint32_t)((Command->CommandMode) |\
- (Command->CommandTarget) |\
- (((Command->AutoRefreshNumber)-1) << 5) |\
- ((Command->ModeRegisterDefinition) << 9)
- );
-
- Device->SDCMR = tmpr;
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait until command is send */
- while(HAL_IS_BIT_SET(Device->SDSR, FMC_SDSR_BUSY))
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- return HAL_TIMEOUT;
- }
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Program the SDRAM Memory Refresh rate.
- * @param Device: Pointer to SDRAM device instance
- * @param RefreshRate: The SDRAM refresh rate value.
- * @retval HAL state
- */
-HAL_StatusTypeDef FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate)
-{
- /* Check the parameters */
- assert_param(IS_FMC_SDRAM_DEVICE(Device));
- assert_param(IS_FMC_REFRESH_RATE(RefreshRate));
-
- /* Set the refresh rate in command register */
- Device->SDRTR |= (RefreshRate<<1);
-
- return HAL_OK;
-}
-
-/**
- * @brief Set the Number of consecutive SDRAM Memory auto Refresh commands.
- * @param Device: Pointer to SDRAM device instance
- * @param AutoRefreshNumber: Specifies the auto Refresh number.
- * @retval None
- */
-HAL_StatusTypeDef FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, uint32_t AutoRefreshNumber)
-{
- /* Check the parameters */
- assert_param(IS_FMC_SDRAM_DEVICE(Device));
- assert_param(IS_FMC_AUTOREFRESH_NUMBER(AutoRefreshNumber));
-
- /* Set the Auto-refresh number in command register */
- Device->SDCMR |= (AutoRefreshNumber << 5);
-
- return HAL_OK;
-}
-
-/**
- * @brief Returns the indicated FMC SDRAM bank mode status.
- * @param Device: Pointer to SDRAM device instance
- * @param Bank: Defines the FMC SDRAM bank. This parameter can be
- * FMC_Bank1_SDRAM or FMC_Bank2_SDRAM.
- * @retval The FMC SDRAM bank mode status, could be on of the following values:
- * FMC_SDRAM_NORMAL_MODE, FMC_SDRAM_SELF_REFRESH_MODE or
- * FMC_SDRAM_POWER_DOWN_MODE.
- */
-uint32_t FMC_SDRAM_GetModeStatus(FMC_SDRAM_TypeDef *Device, uint32_t Bank)
-{
- uint32_t tmpreg = 0;
-
- /* Check the parameters */
- assert_param(IS_FMC_SDRAM_DEVICE(Device));
- assert_param(IS_FMC_SDRAM_BANK(Bank));
-
- /* Get the corresponding bank mode */
- if(Bank == FMC_SDRAM_BANK1)
- {
- tmpreg = (uint32_t)(Device->SDSR & FMC_SDSR_MODES1);
- }
- else
- {
- tmpreg = ((uint32_t)(Device->SDSR & FMC_SDSR_MODES2) >> 2);
- }
-
- /* Return the mode status */
- return tmpreg;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
-#endif /* HAL_SRAM_MODULE_ENABLED || HAL_NOR_MODULE_ENABLED || HAL_NAND_MODULE_ENABLED || HAL_PCCARD_MODULE_ENABLED || HAL_SDRAM_MODULE_ENABLED */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c
deleted file mode 100644
index 9121e9e..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_fsmc.c
+++ /dev/null
@@ -1,955 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_ll_fsmc.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief FSMC Low Layer HAL module driver.
- *
- * This file provides firmware functions to manage the following
- * functionalities of the Flexible Static Memory Controller (FSMC) peripheral memories:
- * + Initialization/de-initialization functions
- * + Peripheral Control functions
- * + Peripheral State functions
- *
- @verbatim
- ==============================================================================
- ##### FSMC peripheral features #####
- ==============================================================================
- [..] The Flexible static memory controller (FSMC) includes two memory controllers:
- (+) The NOR/PSRAM memory controller
- (+) The NAND/PC Card memory controller
-
- [..] The FSMC functional block makes the interface with synchronous and asynchronous static
- memories, SDRAM memories, and 16-bit PC memory cards. Its main purposes are:
- (+) to translate AHB transactions into the appropriate external device protocol.
- (+) to meet the access time requirements of the external memory devices.
-
- [..] All external memories share the addresses, data and control signals with the controller.
- Each external device is accessed by means of a unique Chip Select. The FSMC performs
- only one access at a time to an external device.
- The main features of the FSMC controller are the following:
- (+) Interface with static-memory mapped devices including:
- (++) Static random access memory (SRAM).
- (++) Read-only memory (ROM).
- (++) NOR Flash memory/OneNAND Flash memory.
- (++) PSRAM (4 memory banks).
- (++) 16-bit PC Card compatible devices.
- (++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of
- data.
- (+) Independent Chip Select control for each memory bank.
- (+) Independent configuration for each memory bank.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup FSMC_LL FSMC Low Layer
- * @brief FSMC driver modules
- * @{
- */
-
-#if defined (HAL_SRAM_MODULE_ENABLED) || defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED) || defined(HAL_PCCARD_MODULE_ENABLED)
-#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx)
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-/** @addtogroup FSMC_LL_Private_Functions
- * @{
- */
-
-/** @addtogroup FSMC_LL_NORSRAM
- * @brief NORSRAM Controller functions
- *
- @verbatim
- ==============================================================================
- ##### How to use NORSRAM device driver #####
- ==============================================================================
-
- [..]
- This driver contains a set of APIs to interface with the FSMC NORSRAM banks in order
- to run the NORSRAM external devices.
-
- (+) FSMC NORSRAM bank reset using the function FSMC_NORSRAM_DeInit()
- (+) FSMC NORSRAM bank control configuration using the function FSMC_NORSRAM_Init()
- (+) FSMC NORSRAM bank timing configuration using the function FSMC_NORSRAM_Timing_Init()
- (+) FSMC NORSRAM bank extended timing configuration using the function
- FSMC_NORSRAM_Extended_Timing_Init()
- (+) FSMC NORSRAM bank enable/disable write operation using the functions
- FSMC_NORSRAM_WriteOperation_Enable()/FSMC_NORSRAM_WriteOperation_Disable()
-
-@endverbatim
- * @{
- */
-
-/** @addtogroup FSMC_LL_NORSRAM_Private_Functions_Group1
- * @brief Initialization and Configuration functions
- *
- @verbatim
- ==============================================================================
- ##### Initialization and de_initialization functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the FSMC NORSRAM interface
- (+) De-initialize the FSMC NORSRAM interface
- (+) Configure the FSMC clock and associated GPIOs
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initialize the FSMC_NORSRAM device according to the specified
- * control parameters in the FSMC_NORSRAM_InitTypeDef
- * @param Device: Pointer to NORSRAM device instance
- * @param Init: Pointer to NORSRAM Initialization structure
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef* Init)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FSMC_NORSRAM_BANK(Init->NSBank));
- assert_param(IS_FSMC_MUX(Init->DataAddressMux));
- assert_param(IS_FSMC_MEMORY(Init->MemoryType));
- assert_param(IS_FSMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth));
- assert_param(IS_FSMC_BURSTMODE(Init->BurstAccessMode));
- assert_param(IS_FSMC_WAIT_POLARITY(Init->WaitSignalPolarity));
- assert_param(IS_FSMC_WRAP_MODE(Init->WrapMode));
- assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive));
- assert_param(IS_FSMC_WRITE_OPERATION(Init->WriteOperation));
- assert_param(IS_FSMC_WAITE_SIGNAL(Init->WaitSignal));
- assert_param(IS_FSMC_EXTENDED_MODE(Init->ExtendedMode));
- assert_param(IS_FSMC_ASYNWAIT(Init->AsynchronousWait));
- assert_param(IS_FSMC_WRITE_BURST(Init->WriteBurst));
-
- /* Get the BTCR register value */
- tmpr = Device->BTCR[Init->NSBank];
-
- /* Clear MBKEN, MUXEN, MTYP, MWID, FACCEN, BURSTEN, WAITPOL, WRAPMOD, WAITCFG, WREN,
- WAITEN, EXTMOD, ASYNCWAIT, CBURSTRW and CCLKEN bits */
- tmpr &= ((uint32_t)~(FSMC_BCR1_MBKEN | FSMC_BCR1_MUXEN | FSMC_BCR1_MTYP | \
- FSMC_BCR1_MWID | FSMC_BCR1_FACCEN | FSMC_BCR1_BURSTEN | \
- FSMC_BCR1_WAITPOL | FSMC_BCR1_WRAPMOD | FSMC_BCR1_WAITCFG | \
- FSMC_BCR1_WREN | FSMC_BCR1_WAITEN | FSMC_BCR1_EXTMOD | \
- FSMC_BCR1_ASYNCWAIT | FSMC_BCR1_CBURSTRW));
- /* Set NORSRAM device control parameters */
- tmpr |= (uint32_t)(Init->DataAddressMux |\
- Init->MemoryType |\
- Init->MemoryDataWidth |\
- Init->BurstAccessMode |\
- Init->WaitSignalPolarity |\
- Init->WrapMode |\
- Init->WaitSignalActive |\
- Init->WriteOperation |\
- Init->WaitSignal |\
- Init->ExtendedMode |\
- Init->AsynchronousWait |\
- Init->WriteBurst
- );
-
- if(Init->MemoryType == FSMC_MEMORY_TYPE_NOR)
- {
- tmpr |= (uint32_t)FSMC_NORSRAM_FLASH_ACCESS_ENABLE;
- }
-
- Device->BTCR[Init->NSBank] = tmpr;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitialize the FSMC_NORSRAM peripheral
- * @param Device: Pointer to NORSRAM device instance
- * @param ExDevice: Pointer to NORSRAM extended mode device instance
- * @param Bank: NORSRAM bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank)
-{
- /* Check the parameters */
- assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
- assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(ExDevice));
-
- /* Disable the FSMC_NORSRAM device */
- __FSMC_NORSRAM_DISABLE(Device, Bank);
-
- /* De-initialize the FSMC_NORSRAM device */
- /* FSMC_NORSRAM_BANK1 */
- if(Bank == FSMC_NORSRAM_BANK1)
- {
- Device->BTCR[Bank] = 0x000030DB;
- }
- /* FSMC_NORSRAM_BANK2, FSMC_NORSRAM_BANK3 or FSMC_NORSRAM_BANK4 */
- else
- {
- Device->BTCR[Bank] = 0x000030D2;
- }
-
- Device->BTCR[Bank + 1] = 0x0FFFFFFF;
- ExDevice->BWTR[Bank] = 0x0FFFFFFF;
-
- return HAL_OK;
-}
-
-
-/**
- * @brief Initialize the FSMC_NORSRAM Timing according to the specified
- * parameters in the FSMC_NORSRAM_TimingTypeDef
- * @param Device: Pointer to NORSRAM device instance
- * @param Timing: Pointer to NORSRAM Timing structure
- * @param Bank: NORSRAM bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
- assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
- assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime));
- assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
- assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision));
- assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency));
- assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode));
-
- /* Get the BTCR register value */
- tmpr = Device->BTCR[Bank + 1];
-
- /* Clear ADDSET, ADDHLD, DATAST, BUSTURN, CLKDIV, DATLAT and ACCMOD bits */
- tmpr &= ((uint32_t)~(FSMC_BTR1_ADDSET | FSMC_BTR1_ADDHLD | FSMC_BTR1_DATAST | \
- FSMC_BTR1_BUSTURN | FSMC_BTR1_CLKDIV | FSMC_BTR1_DATLAT | \
- FSMC_BTR1_ACCMOD));
-
- /* Set FSMC_NORSRAM device timing parameters */
- tmpr |= (uint32_t)(Timing->AddressSetupTime |\
- ((Timing->AddressHoldTime) << 4) |\
- ((Timing->DataSetupTime) << 8) |\
- ((Timing->BusTurnAroundDuration) << 16) |\
- (((Timing->CLKDivision)-1) << 20) |\
- (((Timing->DataLatency)-2) << 24) |\
- (Timing->AccessMode));
-
- Device->BTCR[Bank + 1] = tmpr;
-
- return HAL_OK;
-}
-
-/**
- * @brief Initialize the FSMC_NORSRAM Extended mode Timing according to the specified
- * parameters in the FSMC_NORSRAM_TimingTypeDef
- * @param Device: Pointer to NORSRAM device instance
- * @param Timing: Pointer to NORSRAM Timing structure
- * @param Bank: NORSRAM bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode)
-{
- uint32_t tmpr = 0;
-
- /* Set NORSRAM device timing register for write configuration, if extended mode is used */
- if(ExtendedMode == FSMC_EXTENDED_MODE_ENABLE)
- {
- /* Check the parameters */
- assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
- assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
- assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime));
- assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
- assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision));
- assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency));
- assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode));
-
- /* Get the BWTR register value */
- tmpr = Device->BWTR[Bank];
-
- /* Clear ADDSET, ADDHLD, DATAST, BUSTURN, CLKDIV, DATLAT and ACCMOD bits */
- tmpr &= ((uint32_t)~(FSMC_BWTR1_ADDSET | FSMC_BWTR1_ADDHLD | FSMC_BWTR1_DATAST | \
- FSMC_BWTR1_BUSTURN | FSMC_BWTR1_CLKDIV | FSMC_BWTR1_DATLAT | \
- FSMC_BWTR1_ACCMOD));
-
- tmpr |= (uint32_t)(Timing->AddressSetupTime |\
- ((Timing->AddressHoldTime) << 4) |\
- ((Timing->DataSetupTime) << 8) |\
- ((Timing->BusTurnAroundDuration) << 16) |\
- (((Timing->CLKDivision)-1) << 20) |\
- (((Timing->DataLatency)-2) << 24) |\
- (Timing->AccessMode));
-
- Device->BWTR[Bank] = tmpr;
- }
- else
- {
- Device->BWTR[Bank] = 0x0FFFFFFF;
- }
-
- return HAL_OK;
-}
-/**
- * @}
- */
-
-/** @addtogroup FSMC_LL_NORSRAM_Private_Functions_Group2
- * @brief management functions
- *
-@verbatim
- ==============================================================================
- ##### FSMC_NORSRAM Control functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to control dynamically
- the FSMC NORSRAM interface.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Enables dynamically FSMC_NORSRAM write operation.
- * @param Device: Pointer to NORSRAM device instance
- * @param Bank: NORSRAM bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank)
-{
- /* Enable write operation */
- Device->BTCR[Bank] |= FSMC_WRITE_OPERATION_ENABLE;
-
- return HAL_OK;
-}
-
-/**
- * @brief Disables dynamically FSMC_NORSRAM write operation.
- * @param Device: Pointer to NORSRAM device instance
- * @param Bank: NORSRAM bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank)
-{
- /* Disable write operation */
- Device->BTCR[Bank] &= ~FSMC_WRITE_OPERATION_ENABLE;
-
- return HAL_OK;
-}
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @addtogroup FSMC_LL_NAND
- * @brief NAND Controller functions
- *
- @verbatim
- ==============================================================================
- ##### How to use NAND device driver #####
- ==============================================================================
- [..]
- This driver contains a set of APIs to interface with the FSMC NAND banks in order
- to run the NAND external devices.
-
- (+) FSMC NAND bank reset using the function FSMC_NAND_DeInit()
- (+) FSMC NAND bank control configuration using the function FSMC_NAND_Init()
- (+) FSMC NAND bank common space timing configuration using the function
- FSMC_NAND_CommonSpace_Timing_Init()
- (+) FSMC NAND bank attribute space timing configuration using the function
- FSMC_NAND_AttributeSpace_Timing_Init()
- (+) FSMC NAND bank enable/disable ECC correction feature using the functions
- FSMC_NAND_ECC_Enable()/FSMC_NAND_ECC_Disable()
- (+) FSMC NAND bank get ECC correction code using the function FSMC_NAND_GetECC()
-
-@endverbatim
- * @{
- */
-
-/** @addtogroup FSMC_LL_NAND_Private_Functions_Group1
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ==============================================================================
- ##### Initialization and de_initialization functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the FSMC NAND interface
- (+) De-initialize the FSMC NAND interface
- (+) Configure the FSMC clock and associated GPIOs
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the FSMC_NAND device according to the specified
- * control parameters in the FSMC_NAND_HandleTypeDef
- * @param Device: Pointer to NAND device instance
- * @param Init: Pointer to NAND Initialization structure
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDef *Init)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FSMC_NAND_BANK(Init->NandBank));
- assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature));
- assert_param(IS_FSMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth));
- assert_param(IS_FSMC_ECC_STATE(Init->EccComputation));
- assert_param(IS_FSMC_ECCPAGE_SIZE(Init->ECCPageSize));
- assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime));
- assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime));
-
- if(Init->NandBank == FSMC_NAND_BANK2)
- {
- /* Get the NAND bank 2 register value */
- tmpr = Device->PCR2;
- }
- else
- {
- /* Get the NAND bank 3 register value */
- tmpr = Device->PCR3;
- }
-
- /* Clear PWAITEN, PBKEN, PTYP, PWID, ECCEN, TCLR, TAR and ECCPS bits */
- tmpr &= ((uint32_t)~(FSMC_PCR2_PWAITEN | FSMC_PCR2_PBKEN | FSMC_PCR2_PTYP | \
- FSMC_PCR2_PWID | FSMC_PCR2_ECCEN | FSMC_PCR2_TCLR | \
- FSMC_PCR2_TAR | FSMC_PCR2_ECCPS));
-
- /* Set NAND device control parameters */
- tmpr |= (uint32_t)(Init->Waitfeature |\
- FSMC_PCR_MEMORY_TYPE_NAND |\
- Init->MemoryDataWidth |\
- Init->EccComputation |\
- Init->ECCPageSize |\
- ((Init->TCLRSetupTime) << 9) |\
- ((Init->TARSetupTime) << 13));
-
- if(Init->NandBank == FSMC_NAND_BANK2)
- {
- /* NAND bank 2 registers configuration */
- Device->PCR2 = tmpr;
- }
- else
- {
- /* NAND bank 3 registers configuration */
- Device->PCR3 = tmpr;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the FSMC_NAND Common space Timing according to the specified
- * parameters in the FSMC_NAND_PCC_TimingTypeDef
- * @param Device: Pointer to NAND device instance
- * @param Timing: Pointer to NAND timing structure
- * @param Bank: NAND bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
- assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
- assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
- assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
-
- if(Bank == FSMC_NAND_BANK2)
- {
- /* Get the NAND bank 2 register value */
- tmpr = Device->PMEM2;
- }
- else
- {
- /* Get the NAND bank 3 register value */
- tmpr = Device->PMEM3;
- }
-
- /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */
- tmpr &= ((uint32_t)~(FSMC_PMEM2_MEMSET2 | FSMC_PMEM2_MEMWAIT2 | FSMC_PMEM2_MEMHOLD2 | \
- FSMC_PMEM2_MEMHIZ2));
-
- /* Set FSMC_NAND device timing parameters */
- tmpr |= (uint32_t)(Timing->SetupTime |\
- ((Timing->WaitSetupTime) << 8) |\
- ((Timing->HoldSetupTime) << 16) |\
- ((Timing->HiZSetupTime) << 24)
- );
-
- if(Bank == FSMC_NAND_BANK2)
- {
- /* NAND bank 2 registers configuration */
- Device->PMEM2 = tmpr;
- }
- else
- {
- /* NAND bank 3 registers configuration */
- Device->PMEM3 = tmpr;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the FSMC_NAND Attribute space Timing according to the specified
- * parameters in the FSMC_NAND_PCC_TimingTypeDef
- * @param Device: Pointer to NAND device instance
- * @param Timing: Pointer to NAND timing structure
- * @param Bank: NAND bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
- assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
- assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
- assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
-
- if(Bank == FSMC_NAND_BANK2)
- {
- /* Get the NAND bank 2 register value */
- tmpr = Device->PATT2;
- }
- else
- {
- /* Get the NAND bank 3 register value */
- tmpr = Device->PATT3;
- }
-
- /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */
- tmpr &= ((uint32_t)~(FSMC_PATT2_ATTSET2 | FSMC_PATT2_ATTWAIT2 | FSMC_PATT2_ATTHOLD2 | \
- FSMC_PATT2_ATTHIZ2));
-
- /* Set FSMC_NAND device timing parameters */
- tmpr |= (uint32_t)(Timing->SetupTime |\
- ((Timing->WaitSetupTime) << 8) |\
- ((Timing->HoldSetupTime) << 16) |\
- ((Timing->HiZSetupTime) << 24)
- );
-
- if(Bank == FSMC_NAND_BANK2)
- {
- /* NAND bank 2 registers configuration */
- Device->PATT2 = tmpr;
- }
- else
- {
- /* NAND bank 3 registers configuration */
- Device->PATT3 = tmpr;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the FSMC_NAND device
- * @param Device: Pointer to NAND device instance
- * @param Bank: NAND bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank)
-{
- /* Disable the NAND Bank */
- __FSMC_NAND_DISABLE(Device, Bank);
-
- /* De-initialize the NAND Bank */
- if(Bank == FSMC_NAND_BANK2)
- {
- /* Set the FSMC_NAND_BANK2 registers to their reset values */
- Device->PCR2 = 0x00000018;
- Device->SR2 = 0x00000040;
- Device->PMEM2 = 0xFCFCFCFC;
- Device->PATT2 = 0xFCFCFCFC;
- }
- /* FSMC_Bank3_NAND */
- else
- {
- /* Set the FSMC_NAND_BANK3 registers to their reset values */
- Device->PCR3 = 0x00000018;
- Device->SR3 = 0x00000040;
- Device->PMEM3 = 0xFCFCFCFC;
- Device->PATT3 = 0xFCFCFCFC;
- }
-
- return HAL_OK;
-}
-/**
- * @}
- */
-
-/** @addtogroup FSMC_LL_NAND_Private_Functions_Group2
- * @brief management functions
- *
-@verbatim
- ==============================================================================
- ##### FSMC_NAND Control functions #####
- ==============================================================================
- [..]
- This subsection provides a set of functions allowing to control dynamically
- the FSMC NAND interface.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Enables dynamically FSMC_NAND ECC feature.
- * @param Device: Pointer to NAND device instance
- * @param Bank: NAND bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank)
-{
- /* Enable ECC feature */
- if(Bank == FSMC_NAND_BANK2)
- {
- Device->PCR2 |= FSMC_PCR2_ECCEN;
- }
- else
- {
- Device->PCR3 |= FSMC_PCR3_ECCEN;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Disables dynamically FSMC_NAND ECC feature.
- * @param Device: Pointer to NAND device instance
- * @param Bank: NAND bank number
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank)
-{
- /* Disable ECC feature */
- if(Bank == FSMC_NAND_BANK2)
- {
- Device->PCR2 &= ~FSMC_PCR2_ECCEN;
- }
- else
- {
- Device->PCR3 &= ~FSMC_PCR3_ECCEN;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Disables dynamically FSMC_NAND ECC feature.
- * @param Device: Pointer to NAND device instance
- * @param ECCval: Pointer to ECC value
- * @param Bank: NAND bank number
- * @param Timeout: Timeout wait value
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout)
-{
- uint32_t tickstart = 0;
-
- /* Check the parameters */
- assert_param(IS_FSMC_NAND_DEVICE(Device));
- assert_param(IS_FSMC_NAND_BANK(Bank));
-
- /* Get tick */
- tickstart = HAL_GetTick();
-
- /* Wait until FIFO is empty */
- while(__FSMC_NAND_GET_FLAG(Device, Bank, FSMC_FLAG_FEMPT) == RESET)
- {
- /* Check for the Timeout */
- if(Timeout != HAL_MAX_DELAY)
- {
- if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
- {
- return HAL_TIMEOUT;
- }
- }
- }
-
- if(Bank == FSMC_NAND_BANK2)
- {
- /* Get the ECCR2 register value */
- *ECCval = (uint32_t)Device->ECCR2;
- }
- else
- {
- /* Get the ECCR3 register value */
- *ECCval = (uint32_t)Device->ECCR3;
- }
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/** @addtogroup FSMC_LL_PCCARD
- * @brief PCCARD Controller functions
- *
- @verbatim
- ==============================================================================
- ##### How to use PCCARD device driver #####
- ==============================================================================
- [..]
- This driver contains a set of APIs to interface with the FSMC PCCARD bank in order
- to run the PCCARD/compact flash external devices.
-
- (+) FSMC PCCARD bank reset using the function FSMC_PCCARD_DeInit()
- (+) FSMC PCCARD bank control configuration using the function FSMC_PCCARD_Init()
- (+) FSMC PCCARD bank common space timing configuration using the function
- FSMC_PCCARD_CommonSpace_Timing_Init()
- (+) FSMC PCCARD bank attribute space timing configuration using the function
- FSMC_PCCARD_AttributeSpace_Timing_Init()
- (+) FSMC PCCARD bank IO space timing configuration using the function
- FSMC_PCCARD_IOSpace_Timing_Init()
-
-@endverbatim
- * @{
- */
-
-/** @addtogroup FSMC_LL_PCCARD_Private_Functions_Group1
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ==============================================================================
- ##### Initialization and de_initialization functions #####
- ==============================================================================
- [..]
- This section provides functions allowing to:
- (+) Initialize and configure the FSMC PCCARD interface
- (+) De-initialize the FSMC PCCARD interface
- (+) Configure the FSMC clock and associated GPIOs
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the FSMC_PCCARD device according to the specified
- * control parameters in the FSMC_PCCARD_HandleTypeDef
- * @param Device: Pointer to PCCARD device instance
- * @param Init: Pointer to PCCARD Initialization structure
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_InitTypeDef *Init)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature));
- assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime));
- assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime));
-
- /* Get PCCARD control register value */
- tmpr = Device->PCR4;
-
- /* Clear TAR, TCLR, PWAITEN and PWID bits */
- tmpr &= ((uint32_t)~(FSMC_PCR4_TAR | FSMC_PCR4_TCLR | FSMC_PCR4_PWAITEN | \
- FSMC_PCR4_PWID));
-
- /* Set FSMC_PCCARD device control parameters */
- tmpr |= (uint32_t)(Init->Waitfeature |\
- FSMC_NAND_PCC_MEM_BUS_WIDTH_16 |\
- (Init->TCLRSetupTime << 9) |\
- (Init->TARSetupTime << 13));
-
- Device->PCR4 = tmpr;
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the FSMC_PCCARD Common space Timing according to the specified
- * parameters in the FSMC_NAND_PCC_TimingTypeDef
- * @param Device: Pointer to PCCARD device instance
- * @param Timing: Pointer to PCCARD timing structure
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
- assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
- assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
- assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
-
- /* Get PCCARD common space timing register value */
- tmpr = Device->PMEM4;
-
- /* Clear MEMSETx, MEMWAITx, MEMHOLDx and MEMHIZx bits */
- tmpr &= ((uint32_t)~(FSMC_PMEM4_MEMSET4 | FSMC_PMEM4_MEMWAIT4 | FSMC_PMEM4_MEMHOLD4 | \
- FSMC_PMEM4_MEMHIZ4));
- /* Set PCCARD timing parameters */
- tmpr |= (uint32_t)((Timing->SetupTime |\
- ((Timing->WaitSetupTime) << 8) |\
- (Timing->HoldSetupTime) << 16) |\
- ((Timing->HiZSetupTime) << 24));
-
- Device->PMEM4 = tmpr;
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the FSMC_PCCARD Attribute space Timing according to the specified
- * parameters in the FSMC_NAND_PCC_TimingTypeDef
- * @param Device: Pointer to PCCARD device instance
- * @param Timing: Pointer to PCCARD timing structure
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
- assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
- assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
- assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
-
- /* Get PCCARD timing parameters */
- tmpr = Device->PATT4;
-
- /* Clear ATTSETx, ATTWAITx, ATTHOLDx and ATTHIZx bits */
- tmpr &= ((uint32_t)~(FSMC_PATT4_ATTSET4 | FSMC_PATT4_ATTWAIT4 | FSMC_PATT4_ATTHOLD4 | \
- FSMC_PATT4_ATTHIZ4));
-
- /* Set PCCARD timing parameters */
- tmpr |= (uint32_t)(Timing->SetupTime |\
- ((Timing->WaitSetupTime) << 8) |\
- ((Timing->HoldSetupTime) << 16) |\
- ((Timing->HiZSetupTime) << 24));
- Device->PATT4 = tmpr;
-
- return HAL_OK;
-}
-
-/**
- * @brief Initializes the FSMC_PCCARD IO space Timing according to the specified
- * parameters in the FSMC_NAND_PCC_TimingTypeDef
- * @param Device: Pointer to PCCARD device instance
- * @param Timing: Pointer to PCCARD timing structure
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
-{
- uint32_t tmpr = 0;
-
- /* Check the parameters */
- assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
- assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
- assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
- assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
-
- /* Get FSMC_PCCARD device timing parameters */
- tmpr = Device->PIO4;
-
- /* Clear IOSET4, IOWAIT4, IOHOLD4 and IOHIZ4 bits */
- tmpr &= ((uint32_t)~(FSMC_PIO4_IOSET4 | FSMC_PIO4_IOWAIT4 | FSMC_PIO4_IOHOLD4 | \
- FSMC_PIO4_IOHIZ4));
-
- /* Set FSMC_PCCARD device timing parameters */
- tmpr |= (uint32_t)(Timing->SetupTime |\
- ((Timing->WaitSetupTime) << 8) |\
- ((Timing->HoldSetupTime) << 16) |\
- ((Timing->HiZSetupTime) << 24));
-
- Device->PIO4 = tmpr;
-
- return HAL_OK;
-}
-
-/**
- * @brief DeInitializes the FSMC_PCCARD device
- * @param Device: Pointer to PCCARD device instance
- * @retval HAL status
- */
-HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device)
-{
- /* Disable the FSMC_PCCARD device */
- __FSMC_PCCARD_DISABLE(Device);
-
- /* De-initialize the FSMC_PCCARD device */
- Device->PCR4 = 0x00000018;
- Device->SR4 = 0x00000000;
- Device->PMEM4 = 0xFCFCFCFC;
- Device->PATT4 = 0xFCFCFCFC;
- Device->PIO4 = 0xFCFCFCFC;
-
- return HAL_OK;
-}
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
-#endif /* HAL_SRAM_MODULE_ENABLED || HAL_NOR_MODULE_ENABLED || HAL_NAND_MODULE_ENABLED || HAL_PCCARD_MODULE_ENABLED */
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c
deleted file mode 100644
index bc33c7a..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_sdmmc.c
+++ /dev/null
@@ -1,505 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_ll_sdmmc.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief SDMMC Low Layer HAL module driver.
- *
- * This file provides firmware functions to manage the following
- * functionalities of the SDMMC peripheral:
- * + Initialization/de-initialization functions
- * + I/O operation functions
- * + Peripheral Control functions
- * + Peripheral State functions
- *
- @verbatim
- ==============================================================================
- ##### SDMMC peripheral features #####
- ==============================================================================
- [..] The SD/SDIO MMC card host interface (SDIO) provides an interface between the APB2
- peripheral bus and MultiMedia cards (MMCs), SD memory cards, SDIO cards and CE-ATA
- devices.
-
- [..] The SDIO features include the following:
- (+) Full compliance with MultiMedia Card System Specification Version 4.2. Card support
- for three different databus modes: 1-bit (default), 4-bit and 8-bit
- (+) Full compatibility with previous versions of MultiMedia Cards (forward compatibility)
- (+) Full compliance with SD Memory Card Specifications Version 2.0
- (+) Full compliance with SD I/O Card Specification Version 2.0: card support for two
- different data bus modes: 1-bit (default) and 4-bit
- (+) Full support of the CE-ATA features (full compliance with CE-ATA digital protocol
- Rev1.1)
- (+) Data transfer up to 48 MHz for the 8 bit mode
- (+) Data and command output enable signals to control external bidirectional drivers.
-
-
- ##### How to use this driver #####
- ==============================================================================
- [..]
- This driver is a considered as a driver of service for external devices drivers
- that interfaces with the SDIO peripheral.
- According to the device used (SD card/ MMC card / SDIO card ...), a set of APIs
- is used in the device's driver to perform SDIO operations and functionalities.
-
- This driver is almost transparent for the final user, it is only used to implement other
- functionalities of the external device.
-
- [..]
- (+) The SDIO clock (SDIOCLK = 48 MHz) is coming from a specific output of PLL
- (PLL48CLK). Before start working with SDIO peripheral make sure that the
- PLL is well configured.
- The SDIO peripheral uses two clock signals:
- (++) SDIO adapter clock (SDIOCLK = 48 MHz)
- (++) APB2 bus clock (PCLK2)
-
- -@@- PCLK2 and SDIO_CK clock frequencies must respect the following condition:
- Frequency(PCLK2) >= (3 / 8 x Frequency(SDIO_CK))
-
- (+) Enable/Disable peripheral clock using RCC peripheral macros related to SDIO
- peripheral.
-
- (+) Enable the Power ON State using the SDIO_PowerState_ON(SDIOx)
- function and disable it using the function SDIO_PowerState_OFF(SDIOx).
-
- (+) Enable/Disable the clock using the __SDIO_ENABLE()/__SDIO_DISABLE() macros.
-
- (+) Enable/Disable the peripheral interrupts using the macros __SDIO_ENABLE_IT(hsdio, IT)
- and __SDIO_DISABLE_IT(hsdio, IT) if you need to use interrupt mode.
-
- (+) When using the DMA mode
- (++) Configure the DMA in the MSP layer of the external device
- (++) Active the needed channel Request
- (++) Enable the DMA using __SDIO_DMA_ENABLE() macro or Disable it using the macro
- __SDIO_DMA_DISABLE().
-
- (+) To control the CPSM (Command Path State Machine) and send
- commands to the card use the SDIO_SendCommand(SDIOx),
- SDIO_GetCommandResponse() and SDIO_GetResponse() functions. First, user has
- to fill the command structure (pointer to SDIO_CmdInitTypeDef) according
- to the selected command to be sent.
- The parameters that should be filled are:
- (++) Command Argument
- (++) Command Index
- (++) Command Response type
- (++) Command Wait
- (++) CPSM Status (Enable or Disable).
-
- -@@- To check if the command is well received, read the SDIO_CMDRESP
- register using the SDIO_GetCommandResponse().
- The SDIO responses registers (SDIO_RESP1 to SDIO_RESP2), use the
- SDIO_GetResponse() function.
-
- (+) To control the DPSM (Data Path State Machine) and send/receive
- data to/from the card use the SDIO_DataConfig(), SDIO_GetDataCounter(),
- SDIO_ReadFIFO(), DIO_WriteFIFO() and SDIO_GetFIFOCount() functions.
-
- *** Read Operations ***
- =======================
- [..]
- (#) First, user has to fill the data structure (pointer to
- SDIO_DataInitTypeDef) according to the selected data type to be received.
- The parameters that should be filled are:
- (++) Data Timeout
- (++) Data Length
- (++) Data Block size
- (++) Data Transfer direction: should be from card (To SDIO)
- (++) Data Transfer mode
- (++) DPSM Status (Enable or Disable)
-
- (#) Configure the SDIO resources to receive the data from the card
- according to selected transfer mode (Refer to Step 8, 9 and 10).
-
- (#) Send the selected Read command (refer to step 11).
-
- (#) Use the SDIO flags/interrupts to check the transfer status.
-
- *** Write Operations ***
- ========================
- [..]
- (#) First, user has to fill the data structure (pointer to
- SDIO_DataInitTypeDef) according to the selected data type to be received.
- The parameters that should be filled are:
- (++) Data Timeout
- (++) Data Length
- (++) Data Block size
- (++) Data Transfer direction: should be to card (To CARD)
- (++) Data Transfer mode
- (++) DPSM Status (Enable or Disable)
-
- (#) Configure the SDIO resources to send the data to the card according to
- selected transfer mode.
-
- (#) Send the selected Write command.
-
- (#) Use the SDIO flags/interrupts to check the transfer status.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_HAL_Driver
- * @{
- */
-
-/** @defgroup SDMMC_LL SDMMC Low Layer
- * @brief Low layer module for SD and MMC driver
- * @{
- */
-
-#if defined (HAL_SD_MODULE_ENABLED) || defined(HAL_MMC_MODULE_ENABLED)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-
-/** @defgroup SDMMC_LL_Exported_Functions SDMMC_LL Exported Functions
- * @{
- */
-
-/** @defgroup HAL_SDMMC_LL_Group1 Initialization/de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization/de-initialization functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the SDIO according to the specified
- * parameters in the SDIO_InitTypeDef and create the associated handle.
- * @param SDIOx: Pointer to SDIO register base
- * @param Init: SDIO initialization structure
- * @retval HAL status
- */
-HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init)
-{
- uint32_t tmpreg = 0;
-
- /* Check the parameters */
- assert_param(IS_SDIO_ALL_INSTANCE(SDIOx));
- assert_param(IS_SDIO_CLOCK_EDGE(Init.ClockEdge));
- assert_param(IS_SDIO_CLOCK_BYPASS(Init.ClockBypass));
- assert_param(IS_SDIO_CLOCK_POWER_SAVE(Init.ClockPowerSave));
- assert_param(IS_SDIO_BUS_WIDE(Init.BusWide));
- assert_param(IS_SDIO_HARDWARE_FLOW_CONTROL(Init.HardwareFlowControl));
- assert_param(IS_SDIO_CLKDIV(Init.ClockDiv));
-
- /* Set SDIO configuration parameters */
- tmpreg |= (Init.ClockEdge |\
- Init.ClockBypass |\
- Init.ClockPowerSave |\
- Init.BusWide |\
- Init.HardwareFlowControl |\
- Init.ClockDiv
- );
-
- /* Write to SDIO CLKCR */
- MODIFY_REG(SDIOx->CLKCR, CLKCR_CLEAR_MASK, tmpreg);
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup HAL_SDMMC_LL_Group2 I/O operation functions
- * @brief Data transfers functions
- *
-@verbatim
- ===============================================================================
- ##### I/O operation functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to manage the SDIO data
- transfers.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Read data (word) from Rx FIFO in blocking mode (polling)
- * @param SDIOx: Pointer to SDIO register base
- * @retval HAL status
- */
-uint32_t SDIO_ReadFIFO(SDIO_TypeDef *SDIOx)
-{
- /* Read data from Rx FIFO */
- return (SDIOx->FIFO);
-}
-
-/**
- * @brief Write data (word) to Tx FIFO in blocking mode (polling)
- * @param SDIOx: Pointer to SDIO register base
- * @param pWriteData: pointer to data to write
- * @retval HAL status
- */
-HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData)
-{
- /* Write data to FIFO */
- SDIOx->FIFO = *pWriteData;
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/** @defgroup HAL_SDMMC_LL_Group3 Peripheral Control functions
- * @brief management functions
- *
-@verbatim
- ===============================================================================
- ##### Peripheral Control functions #####
- ===============================================================================
- [..]
- This subsection provides a set of functions allowing to control the SDIO data
- transfers.
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Set SDIO Power state to ON.
- * @param SDIOx: Pointer to SDIO register base
- * @retval HAL status
- */
-HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx)
-{
- /* Set power state to ON */
- SDIOx->POWER = SDIO_POWER_PWRCTRL;
-
- return HAL_OK;
-}
-
-/**
- * @brief Set SDIO Power state to OFF.
- * @param SDIOx: Pointer to SDIO register base
- * @retval HAL status
- */
-HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx)
-{
- /* Set power state to OFF */
- SDIOx->POWER = (uint32_t)0x00000000;
-
- return HAL_OK;
-}
-
-/**
- * @brief Get SDIO Power state.
- * @param SDIOx: Pointer to SDIO register base
- * @retval Power status of the controller. The returned value can be one of the
- * following values:
- * - 0x00: Power OFF
- * - 0x02: Power UP
- * - 0x03: Power ON
- */
-uint32_t SDIO_GetPowerState(SDIO_TypeDef *SDIOx)
-{
- return (SDIOx->POWER & SDIO_POWER_PWRCTRL);
-}
-
-/**
- * @brief Configure the SDIO command path according to the specified parameters in
- * SDIO_CmdInitTypeDef structure and send the command
- * @param SDIOx: Pointer to SDIO register base
- * @param SDIO_CmdInitStruct: pointer to a SDIO_CmdInitTypeDef structure that contains
- * the configuration information for the SDIO command
- * @retval HAL status
- */
-HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *SDIO_CmdInitStruct)
-{
- uint32_t tmpreg = 0;
-
- /* Check the parameters */
- assert_param(IS_SDIO_CMD_INDEX(SDIO_CmdInitStruct->CmdIndex));
- assert_param(IS_SDIO_RESPONSE(SDIO_CmdInitStruct->Response));
- assert_param(IS_SDIO_WAIT(SDIO_CmdInitStruct->WaitForInterrupt));
- assert_param(IS_SDIO_CPSM(SDIO_CmdInitStruct->CPSM));
-
- /* Set the SDIO Argument value */
- SDIOx->ARG = SDIO_CmdInitStruct->Argument;
-
- /* Set SDIO command parameters */
- tmpreg |= (uint32_t)(SDIO_CmdInitStruct->CmdIndex |\
- SDIO_CmdInitStruct->Response |\
- SDIO_CmdInitStruct->WaitForInterrupt |\
- SDIO_CmdInitStruct->CPSM);
-
- /* Write to SDIO CMD register */
- MODIFY_REG(SDIOx->CMD, CMD_CLEAR_MASK, tmpreg);
-
- return HAL_OK;
-}
-
-/**
- * @brief Return the command index of last command for which response received
- * @param SDIOx: Pointer to SDIO register base
- * @retval Command index of the last command response received
- */
-uint8_t SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx)
-{
- return (uint8_t)(SDIOx->RESPCMD);
-}
-
-
-/**
- * @brief Return the response received from the card for the last command
- * @param SDIO_RESP: Specifies the SDIO response register.
- * This parameter can be one of the following values:
- * @arg SDIO_RESP1: Response Register 1
- * @arg SDIO_RESP2: Response Register 2
- * @arg SDIO_RESP3: Response Register 3
- * @arg SDIO_RESP4: Response Register 4
- * @retval The Corresponding response register value
- */
-uint32_t SDIO_GetResponse(uint32_t SDIO_RESP)
-{
- __IO uint32_t tmp = 0;
-
- /* Check the parameters */
- assert_param(IS_SDIO_RESP(SDIO_RESP));
-
- /* Get the response */
- tmp = SDIO_RESP_ADDR + SDIO_RESP;
-
- return (*(__IO uint32_t *) tmp);
-}
-
-/**
- * @brief Configure the SDIO data path according to the specified
- * parameters in the SDIO_DataInitTypeDef.
- * @param SDIOx: Pointer to SDIO register base
- * @param SDIO_DataInitStruct : pointer to a SDIO_DataInitTypeDef structure
- * that contains the configuration information for the SDIO command.
- * @retval HAL status
- */
-HAL_StatusTypeDef SDIO_DataConfig(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* SDIO_DataInitStruct)
-{
- uint32_t tmpreg = 0;
-
- /* Check the parameters */
- assert_param(IS_SDIO_DATA_LENGTH(SDIO_DataInitStruct->DataLength));
- assert_param(IS_SDIO_BLOCK_SIZE(SDIO_DataInitStruct->DataBlockSize));
- assert_param(IS_SDIO_TRANSFER_DIR(SDIO_DataInitStruct->TransferDir));
- assert_param(IS_SDIO_TRANSFER_MODE(SDIO_DataInitStruct->TransferMode));
- assert_param(IS_SDIO_DPSM(SDIO_DataInitStruct->DPSM));
-
- /* Set the SDIO Data Timeout value */
- SDIOx->DTIMER = SDIO_DataInitStruct->DataTimeOut;
-
- /* Set the SDIO DataLength value */
- SDIOx->DLEN = SDIO_DataInitStruct->DataLength;
-
- /* Set the SDIO data configuration parameters */
- tmpreg |= (uint32_t)(SDIO_DataInitStruct->DataBlockSize |\
- SDIO_DataInitStruct->TransferDir |\
- SDIO_DataInitStruct->TransferMode |\
- SDIO_DataInitStruct->DPSM);
-
- /* Write to SDIO DCTRL */
- MODIFY_REG(SDIOx->DCTRL, DCTRL_CLEAR_MASK, tmpreg);
-
- return HAL_OK;
-
-}
-
-/**
- * @brief Returns number of remaining data bytes to be transferred.
- * @param SDIOx: Pointer to SDIO register base
- * @retval Number of remaining data bytes to be transferred
- */
-uint32_t SDIO_GetDataCounter(SDIO_TypeDef *SDIOx)
-{
- return (SDIOx->DCOUNT);
-}
-
-/**
- * @brief Get the FIFO data
- * @param SDIOx: Pointer to SDIO register base
- * @retval Data received
- */
-uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx)
-{
- return (SDIOx->FIFO);
-}
-
-
-/**
- * @brief Sets one of the two options of inserting read wait interval.
- * @param SDIO_ReadWaitMode: SD I/O Read Wait operation mode.
- * This parameter can be:
- * @arg SDIO_READ_WAIT_MODE_CLK: Read Wait control by stopping SDIOCLK
- * @arg SDIO_READ_WAIT_MODE_DATA2: Read Wait control using SDIO_DATA2
- * @retval None
- */
-HAL_StatusTypeDef SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode)
-{
- /* Check the parameters */
- assert_param(IS_SDIO_READWAIT_MODE(SDIO_ReadWaitMode));
-
- *(__IO uint32_t *)DCTRL_RWMOD_BB = SDIO_ReadWaitMode;
-
- return HAL_OK;
-}
-
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-#endif /* (HAL_SD_MODULE_ENABLED) || (HAL_MMC_MODULE_ENABLED) */
-/**
- * @}
- */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c b/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c
deleted file mode 100644
index f45004c..0000000
--- a/Drivers/STM32F4xx_HAL_Driver/Src/stm32f4xx_ll_usb.c
+++ /dev/null
@@ -1,1705 +0,0 @@
-/**
- ******************************************************************************
- * @file stm32f4xx_ll_usb.c
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief USB Low Layer HAL module driver.
- *
- * This file provides firmware functions to manage the following
- * functionalities of the USB Peripheral Controller:
- * + Initialization/de-initialization functions
- * + I/O operation functions
- * + Peripheral Control functions
- * + Peripheral State functions
- *
- @verbatim
- ==============================================================================
- ##### How to use this driver #####
- ==============================================================================
- [..]
- (#) Fill parameters of Init structure in USB_OTG_CfgTypeDef structure.
-
- (#) Call USB_CoreInit() API to initialize the USB Core peripheral.
-
- (#) The upper HAL HCD/PCD driver will call the right routines for its internal processes.
-
- @endverbatim
- ******************************************************************************
- * @attention
- *
- * <h2><center>&copy; COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/** @addtogroup STM32F4xx_LL_USB_DRIVER
- * @{
- */
-
-#if defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED)
-
-/* Private typedef -----------------------------------------------------------*/
-/* Private define ------------------------------------------------------------*/
-/* Private macro -------------------------------------------------------------*/
-/* Private variables ---------------------------------------------------------*/
-/* Private function prototypes -----------------------------------------------*/
-/* Private functions ---------------------------------------------------------*/
-static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx);
-
-/* Exported functions --------------------------------------------------------*/
-
-/** @defgroup LL_USB_Exported_Functions USB Low Layer Exported Functions
- * @{
- */
-
-/** @defgroup LL_USB_Group1 Initialization/de-initialization functions
- * @brief Initialization and Configuration functions
- *
-@verbatim
- ===============================================================================
- ##### Initialization/de-initialization functions #####
- ===============================================================================
- [..] This section provides functions allowing to:
-
-@endverbatim
- * @{
- */
-
-/**
- * @brief Initializes the USB Core
- * @param USBx: USB Instance
- * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains
- * the configuration information for the specified USBx peripheral.
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
-{
- if (cfg.phy_itface == USB_OTG_ULPI_PHY)
- {
-
- USBx->GCCFG &= ~(USB_OTG_GCCFG_PWRDWN);
-
- /* Init The ULPI Interface */
- USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_TSDPS | USB_OTG_GUSBCFG_ULPIFSLS | USB_OTG_GUSBCFG_PHYSEL);
-
- /* Select vbus source */
- USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_ULPIEVBUSD | USB_OTG_GUSBCFG_ULPIEVBUSI);
- if(cfg.use_external_vbus == 1)
- {
- USBx->GUSBCFG |= USB_OTG_GUSBCFG_ULPIEVBUSD;
- }
- /* Reset after a PHY select */
- USB_CoreReset(USBx);
- }
- else /* FS interface (embedded Phy) */
- {
- /* Select FS Embedded PHY */
- USBx->GUSBCFG |= USB_OTG_GUSBCFG_PHYSEL;
-
- /* Reset after a PHY select and set Host mode */
- USB_CoreReset(USBx);
-
- /* Deactivate the power down*/
- USBx->GCCFG = USB_OTG_GCCFG_PWRDWN;
- }
-
- if(cfg.dma_enable == ENABLE)
- {
- USBx->GAHBCFG |= (USB_OTG_GAHBCFG_HBSTLEN_1 | USB_OTG_GAHBCFG_HBSTLEN_2);
- USBx->GAHBCFG |= USB_OTG_GAHBCFG_DMAEN;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_EnableGlobalInt
- * Enables the controller's Global Int in the AHB Config reg
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx)
-{
- USBx->GAHBCFG |= USB_OTG_GAHBCFG_GINT;
- return HAL_OK;
-}
-
-
-/**
- * @brief USB_DisableGlobalInt
- * Disable the controller's Global Int in the AHB Config reg
- * @param USBx : Selected device
- * @retval HAL status
-*/
-HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx)
-{
- USBx->GAHBCFG &= ~USB_OTG_GAHBCFG_GINT;
- return HAL_OK;
-}
-
-/**
- * @brief USB_SetCurrentMode : Set functional mode
- * @param USBx : Selected device
- * @param mode : current core mode
- * This parameter can be one of these values:
- * @arg USB_OTG_DEVICE_MODE: Peripheral mode
- * @arg USB_OTG_HOST_MODE: Host mode
- * @arg USB_OTG_DRD_MODE: Dual Role Device mode
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_OTG_ModeTypeDef mode)
-{
- USBx->GUSBCFG &= ~(USB_OTG_GUSBCFG_FHMOD | USB_OTG_GUSBCFG_FDMOD);
-
- if ( mode == USB_OTG_HOST_MODE)
- {
- USBx->GUSBCFG |= USB_OTG_GUSBCFG_FHMOD;
- }
- else if ( mode == USB_OTG_DEVICE_MODE)
- {
- USBx->GUSBCFG |= USB_OTG_GUSBCFG_FDMOD;
- }
- HAL_Delay(50);
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_DevInit : Initializes the USB_OTG controller registers
- * for device mode
- * @param USBx : Selected device
- * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains
- * the configuration information for the specified USBx peripheral.
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_DevInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
-{
- uint32_t i = 0;
-
- /*Activate VBUS Sensing B */
-#if defined(STM32F446xx)
- USBx->GCCFG |= USB_OTG_GCCFG_VBDEN;
-
- if (cfg.vbus_sensing_enable == 0)
- {
- /* Deactivate VBUS Sensing B */
- USBx->GCCFG &= ~USB_OTG_GCCFG_VBDEN;
-
- /* B-peripheral session valid override enable*/
- USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOEN;
- USBx->GOTGCTL |= USB_OTG_GOTGCTL_BVALOVAL;
- }
-#else
- USBx->GCCFG |= USB_OTG_GCCFG_VBUSBSEN;
-
- if (cfg.vbus_sensing_enable == 0)
- {
- USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS;
- }
-#endif /* STM32F446xx */
-
- /* Restart the Phy Clock */
- USBx_PCGCCTL = 0;
-
- /* Device mode configuration */
- USBx_DEVICE->DCFG |= DCFG_FRAME_INTERVAL_80;
-
- if(cfg.phy_itface == USB_OTG_ULPI_PHY)
- {
- if(cfg.speed == USB_OTG_SPEED_HIGH)
- {
- /* Set High speed phy */
- USB_SetDevSpeed (USBx , USB_OTG_SPEED_HIGH);
- }
- else
- {
- /* set High speed phy in Full speed mode */
- USB_SetDevSpeed (USBx , USB_OTG_SPEED_HIGH_IN_FULL);
- }
- }
- else
- {
- /* Set Full speed phy */
- USB_SetDevSpeed (USBx , USB_OTG_SPEED_FULL);
- }
-
- /* Flush the FIFOs */
- USB_FlushTxFifo(USBx , 0x10); /* all Tx FIFOs */
- USB_FlushRxFifo(USBx);
-
- /* Clear all pending Device Interrupts */
- USBx_DEVICE->DIEPMSK = 0;
- USBx_DEVICE->DOEPMSK = 0;
- USBx_DEVICE->DAINT = 0xFFFFFFFF;
- USBx_DEVICE->DAINTMSK = 0;
-
- for (i = 0; i < cfg.dev_endpoints; i++)
- {
- if ((USBx_INEP(i)->DIEPCTL & USB_OTG_DIEPCTL_EPENA) == USB_OTG_DIEPCTL_EPENA)
- {
- USBx_INEP(i)->DIEPCTL = (USB_OTG_DIEPCTL_EPDIS | USB_OTG_DIEPCTL_SNAK);
- }
- else
- {
- USBx_INEP(i)->DIEPCTL = 0;
- }
-
- USBx_INEP(i)->DIEPTSIZ = 0;
- USBx_INEP(i)->DIEPINT = 0xFF;
- }
-
- for (i = 0; i < cfg.dev_endpoints; i++)
- {
- if ((USBx_OUTEP(i)->DOEPCTL & USB_OTG_DOEPCTL_EPENA) == USB_OTG_DOEPCTL_EPENA)
- {
- USBx_OUTEP(i)->DOEPCTL = (USB_OTG_DOEPCTL_EPDIS | USB_OTG_DOEPCTL_SNAK);
- }
- else
- {
- USBx_OUTEP(i)->DOEPCTL = 0;
- }
-
- USBx_OUTEP(i)->DOEPTSIZ = 0;
- USBx_OUTEP(i)->DOEPINT = 0xFF;
- }
-
- USBx_DEVICE->DIEPMSK &= ~(USB_OTG_DIEPMSK_TXFURM);
-
- if (cfg.dma_enable == 1)
- {
- /*Set threshold parameters */
- USBx_DEVICE->DTHRCTL = (USB_OTG_DTHRCTL_TXTHRLEN_6 | USB_OTG_DTHRCTL_RXTHRLEN_6);
- USBx_DEVICE->DTHRCTL |= (USB_OTG_DTHRCTL_RXTHREN | USB_OTG_DTHRCTL_ISOTHREN | USB_OTG_DTHRCTL_NONISOTHREN);
-
- i= USBx_DEVICE->DTHRCTL;
- }
-
- /* Disable all interrupts. */
- USBx->GINTMSK = 0;
-
- /* Clear any pending interrupts */
- USBx->GINTSTS = 0xBFFFFFFF;
-
- /* Enable the common interrupts */
- if (cfg.dma_enable == DISABLE)
- {
- USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM;
- }
-
- /* Enable interrupts matching to the Device mode ONLY */
- USBx->GINTMSK |= (USB_OTG_GINTMSK_USBSUSPM | USB_OTG_GINTMSK_USBRST |\
- USB_OTG_GINTMSK_ENUMDNEM | USB_OTG_GINTMSK_IEPINT |\
- USB_OTG_GINTMSK_OEPINT | USB_OTG_GINTMSK_IISOIXFRM|\
- USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM);
-
- if(cfg.Sof_enable)
- {
- USBx->GINTMSK |= USB_OTG_GINTMSK_SOFM;
- }
-
- if (cfg.vbus_sensing_enable == ENABLE)
- {
- USBx->GINTMSK |= (USB_OTG_GINTMSK_SRQIM | USB_OTG_GINTMSK_OTGINT);
- }
-
- return HAL_OK;
-}
-
-
-/**
- * @brief USB_OTG_FlushTxFifo : Flush a Tx FIFO
- * @param USBx : Selected device
- * @param num : FIFO number
- * This parameter can be a value from 1 to 15
- 15 means Flush all Tx FIFOs
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num )
-{
- uint32_t count = 0;
-
- USBx->GRSTCTL = ( USB_OTG_GRSTCTL_TXFFLSH |(uint32_t)( num << 6));
-
- do
- {
- if (++count > 200000)
- {
- return HAL_TIMEOUT;
- }
- }
- while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_TXFFLSH) == USB_OTG_GRSTCTL_TXFFLSH);
-
- return HAL_OK;
-}
-
-
-/**
- * @brief USB_FlushRxFifo : Flush Rx FIFO
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_FlushRxFifo(USB_OTG_GlobalTypeDef *USBx)
-{
- uint32_t count = 0;
-
- USBx->GRSTCTL = USB_OTG_GRSTCTL_RXFFLSH;
-
- do
- {
- if (++count > 200000)
- {
- return HAL_TIMEOUT;
- }
- }
- while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_RXFFLSH) == USB_OTG_GRSTCTL_RXFFLSH);
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_SetDevSpeed :Initializes the DevSpd field of DCFG register
- * depending the PHY type and the enumeration speed of the device.
- * @param USBx : Selected device
- * @param speed : device speed
- * This parameter can be one of these values:
- * @arg USB_OTG_SPEED_HIGH: High speed mode
- * @arg USB_OTG_SPEED_HIGH_IN_FULL: High speed core in Full Speed mode
- * @arg USB_OTG_SPEED_FULL: Full speed mode
- * @arg USB_OTG_SPEED_LOW: Low speed mode
- * @retval Hal status
- */
-HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed)
-{
- USBx_DEVICE->DCFG |= speed;
- return HAL_OK;
-}
-
-/**
- * @brief USB_GetDevSpeed :Return the Dev Speed
- * @param USBx : Selected device
- * @retval speed : device speed
- * This parameter can be one of these values:
- * @arg USB_OTG_SPEED_HIGH: High speed mode
- * @arg USB_OTG_SPEED_FULL: Full speed mode
- * @arg USB_OTG_SPEED_LOW: Low speed mode
- */
-uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx)
-{
- uint8_t speed = 0;
-
- if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ)
- {
- speed = USB_OTG_SPEED_HIGH;
- }
- else if (((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ)||
- ((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_FS_PHY_48MHZ))
- {
- speed = USB_OTG_SPEED_FULL;
- }
- else if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ)
- {
- speed = USB_OTG_SPEED_LOW;
- }
-
- return speed;
-}
-
-/**
- * @brief Activate and configure an endpoint
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
-{
- if (ep->is_in == 1)
- {
- USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num)));
-
- if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0)
- {
- USBx_INEP(ep->num)->DIEPCTL |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18 ) |\
- ((ep->num) << 22 ) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP));
- }
-
- }
- else
- {
- USBx_DEVICE->DAINTMSK |= USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16);
-
- if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0)
- {
- USBx_OUTEP(ep->num)->DOEPCTL |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18 ) |\
- (USB_OTG_DIEPCTL_SD0PID_SEVNFRM)| (USB_OTG_DOEPCTL_USBAEP));
- }
- }
- return HAL_OK;
-}
-/**
- * @brief Activate and configure a dedicated endpoint
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
-{
- static __IO uint32_t debug = 0;
-
- /* Read DEPCTLn register */
- if (ep->is_in == 1)
- {
- if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_USBAEP) == 0)
- {
- USBx_INEP(ep->num)->DIEPCTL |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18 ) |\
- ((ep->num) << 22 ) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP));
- }
-
-
- debug |= ((ep->maxpacket & USB_OTG_DIEPCTL_MPSIZ ) | (ep->type << 18 ) |\
- ((ep->num) << 22 ) | (USB_OTG_DIEPCTL_SD0PID_SEVNFRM) | (USB_OTG_DIEPCTL_USBAEP));
-
- USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num)));
- }
- else
- {
- if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_USBAEP) == 0)
- {
- USBx_OUTEP(ep->num)->DOEPCTL |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18 ) |\
- ((ep->num) << 22 ) | (USB_OTG_DOEPCTL_USBAEP));
-
- debug = (uint32_t)(((uint32_t )USBx) + USB_OTG_OUT_ENDPOINT_BASE + (0)*USB_OTG_EP_REG_SIZE);
- debug = (uint32_t )&USBx_OUTEP(ep->num)->DOEPCTL;
- debug |= ((ep->maxpacket & USB_OTG_DOEPCTL_MPSIZ ) | (ep->type << 18 ) |\
- ((ep->num) << 22 ) | (USB_OTG_DOEPCTL_USBAEP));
- }
-
- USBx_DEVICE->DEACHMSK |= USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16);
- }
-
- return HAL_OK;
-}
-/**
- * @brief De-activate and de-initialize an endpoint
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
-{
- /* Read DEPCTLn register */
- if (ep->is_in == 1)
- {
- USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num))));
- USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num))));
- USBx_INEP(ep->num)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP;
- }
- else
- {
- USBx_DEVICE->DEACHMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16));
- USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16));
- USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP;
- }
- return HAL_OK;
-}
-
-/**
- * @brief De-activate and de-initialize a dedicated endpoint
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
-{
- /* Read DEPCTLn register */
- if (ep->is_in == 1)
- {
- USBx_INEP(ep->num)->DIEPCTL &= ~ USB_OTG_DIEPCTL_USBAEP;
- USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_IEPM & ((1 << (ep->num))));
- }
- else
- {
- USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_USBAEP;
- USBx_DEVICE->DAINTMSK &= ~(USB_OTG_DAINTMSK_OEPM & ((1 << (ep->num)) << 16));
- }
- return HAL_OK;
-}
-
-/**
- * @brief USB_EPStartXfer : setup and starts a transfer over an EP
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @param dma: USB dma enabled or disabled
- * This parameter can be one of these values:
- * 0 : DMA feature not used
- * 1 : DMA feature used
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma)
-{
- uint16_t pktcnt = 0;
-
- /* IN endpoint */
- if (ep->is_in == 1)
- {
- /* Zero Length Packet? */
- if (ep->xfer_len == 0)
- {
- USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
- USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19)) ;
- USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
- }
- else
- {
- /* Program the transfer size and packet count
- * as follows: xfersize = N * maxpacket +
- * short_packet pktcnt = N + (short_packet
- * exist ? 1 : 0)
- */
- USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
- USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
- USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (((ep->xfer_len + ep->maxpacket -1)/ ep->maxpacket) << 19)) ;
- USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len);
-
- if (ep->type == EP_TYPE_ISOC)
- {
- USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_MULCNT);
- USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_MULCNT & (1 << 29));
- }
- }
-
- if (dma == 1)
- {
- USBx_INEP(ep->num)->DIEPDMA = (uint32_t)(ep->dma_addr);
- }
- else
- {
- if (ep->type != EP_TYPE_ISOC)
- {
- /* Enable the Tx FIFO Empty Interrupt for this EP */
- if (ep->xfer_len > 0)
- {
- USBx_DEVICE->DIEPEMPMSK |= 1 << ep->num;
- }
- }
- }
-
- if (ep->type == EP_TYPE_ISOC)
- {
- if ((USBx_DEVICE->DSTS & ( 1 << 8 )) == 0)
- {
- USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SODDFRM;
- }
- else
- {
- USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM;
- }
- }
-
- /* EP enable, IN data in FIFO */
- USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
-
- if (ep->type == EP_TYPE_ISOC)
- {
- USB_WritePacket(USBx, ep->xfer_buff, ep->num, ep->xfer_len, dma);
- }
- }
- else /* OUT endpoint */
- {
- /* Program the transfer size and packet count as follows:
- * pktcnt = N
- * xfersize = N * maxpacket
- */
- USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ);
- USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT);
-
- if (ep->xfer_len == 0)
- {
- USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & ep->maxpacket);
- USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19)) ;
- }
- else
- {
- pktcnt = (ep->xfer_len + ep->maxpacket -1)/ ep->maxpacket;
- USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (pktcnt << 19)); ;
- USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket * pktcnt));
- }
-
- if (dma == 1)
- {
- USBx_OUTEP(ep->num)->DOEPDMA = (uint32_t)ep->xfer_buff;
- }
-
- if (ep->type == EP_TYPE_ISOC)
- {
- if ((USBx_DEVICE->DSTS & ( 1 << 8 )) == 0)
- {
- USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SODDFRM;
- }
- else
- {
- USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM;
- }
- }
- /* EP enable */
- USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA);
- }
- return HAL_OK;
-}
-
-/**
- * @brief USB_EP0StartXfer : setup and starts a transfer over the EP 0
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @param dma: USB dma enabled or disabled
- * This parameter can be one of these values:
- * 0 : DMA feature not used
- * 1 : DMA feature used
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma)
-{
- /* IN endpoint */
- if (ep->is_in == 1)
- {
- /* Zero Length Packet? */
- if (ep->xfer_len == 0)
- {
- USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
- USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19)) ;
- USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
- }
- else
- {
- /* Program the transfer size and packet count
- * as follows: xfersize = N * maxpacket +
- * short_packet pktcnt = N + (short_packet
- * exist ? 1 : 0)
- */
- USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_XFRSIZ);
- USBx_INEP(ep->num)->DIEPTSIZ &= ~(USB_OTG_DIEPTSIZ_PKTCNT);
-
- if(ep->xfer_len > ep->maxpacket)
- {
- ep->xfer_len = ep->maxpacket;
- }
- USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_PKTCNT & (1 << 19)) ;
- USBx_INEP(ep->num)->DIEPTSIZ |= (USB_OTG_DIEPTSIZ_XFRSIZ & ep->xfer_len);
-
- }
-
- if (dma == 1)
- {
- USBx_INEP(ep->num)->DIEPDMA = (uint32_t)(ep->dma_addr);
- }
- else
- {
- /* Enable the Tx FIFO Empty Interrupt for this EP */
- if (ep->xfer_len > 0)
- {
- USBx_DEVICE->DIEPEMPMSK |= 1 << (ep->num);
- }
- }
-
- /* EP enable, IN data in FIFO */
- USBx_INEP(ep->num)->DIEPCTL |= (USB_OTG_DIEPCTL_CNAK | USB_OTG_DIEPCTL_EPENA);
- }
- else /* OUT endpoint */
- {
- /* Program the transfer size and packet count as follows:
- * pktcnt = N
- * xfersize = N * maxpacket
- */
- USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_XFRSIZ);
- USBx_OUTEP(ep->num)->DOEPTSIZ &= ~(USB_OTG_DOEPTSIZ_PKTCNT);
-
- if (ep->xfer_len > 0)
- {
- ep->xfer_len = ep->maxpacket;
- }
-
- USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19));
- USBx_OUTEP(ep->num)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_XFRSIZ & (ep->maxpacket));
-
-
- if (dma == 1)
- {
- USBx_OUTEP(ep->num)->DOEPDMA = (uint32_t)(ep->xfer_buff);
- }
-
- /* EP enable */
- USBx_OUTEP(ep->num)->DOEPCTL |= (USB_OTG_DOEPCTL_CNAK | USB_OTG_DOEPCTL_EPENA);
- }
- return HAL_OK;
-}
-
-/**
- * @brief USB_WritePacket : Writes a packet into the Tx FIFO associated
- * with the EP/channel
- * @param USBx : Selected device
- * @param src : pointer to source buffer
- * @param ch_ep_num : endpoint or host channel number
- * @param len : Number of bytes to write
- * @param dma: USB dma enabled or disabled
- * This parameter can be one of these values:
- * 0 : DMA feature not used
- * 1 : DMA feature used
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma)
-{
- uint32_t count32b= 0 , i= 0;
-
- if (dma == 0)
- {
- count32b = (len + 3) / 4;
- for (i = 0; i < count32b; i++, src += 4)
- {
- USBx_DFIFO(ch_ep_num) = *((__packed uint32_t *)src);
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief USB_ReadPacket : read a packet from the Tx FIFO associated
- * with the EP/channel
- * @param USBx : Selected device
- * @param src : source pointer
- * @param ch_ep_num : endpoint or host channel number
- * @param len : Number of bytes to read
- * @param dma: USB dma enabled or disabled
- * This parameter can be one of these values:
- * 0 : DMA feature not used
- * 1 : DMA feature used
- * @retval pointer to destination buffer
- */
-void *USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len)
-{
- uint32_t i=0;
- uint32_t count32b = (len + 3) / 4;
-
- for ( i = 0; i < count32b; i++, dest += 4 )
- {
- *(__packed uint32_t *)dest = USBx_DFIFO(0);
-
- }
- return ((void *)dest);
-}
-
-/**
- * @brief USB_EPSetStall : set a stall condition over an EP
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep)
-{
- if (ep->is_in == 1)
- {
- if (((USBx_INEP(ep->num)->DIEPCTL) & USB_OTG_DIEPCTL_EPENA) == 0)
- {
- USBx_INEP(ep->num)->DIEPCTL &= ~(USB_OTG_DIEPCTL_EPDIS);
- }
- USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_STALL;
- }
- else
- {
- if (((USBx_OUTEP(ep->num)->DOEPCTL) & USB_OTG_DOEPCTL_EPENA) == 0)
- {
- USBx_OUTEP(ep->num)->DOEPCTL &= ~(USB_OTG_DOEPCTL_EPDIS);
- }
- USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_STALL;
- }
- return HAL_OK;
-}
-
-
-/**
- * @brief USB_EPClearStall : Clear a stall condition over an EP
- * @param USBx : Selected device
- * @param ep: pointer to endpoint structure
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep)
-{
- if (ep->is_in == 1)
- {
- USBx_INEP(ep->num)->DIEPCTL &= ~USB_OTG_DIEPCTL_STALL;
- if (ep->type == EP_TYPE_INTR || ep->type == EP_TYPE_BULK)
- {
- USBx_INEP(ep->num)->DIEPCTL |= USB_OTG_DIEPCTL_SD0PID_SEVNFRM; /* DATA0 */
- }
- }
- else
- {
- USBx_OUTEP(ep->num)->DOEPCTL &= ~USB_OTG_DOEPCTL_STALL;
- if (ep->type == EP_TYPE_INTR || ep->type == EP_TYPE_BULK)
- {
- USBx_OUTEP(ep->num)->DOEPCTL |= USB_OTG_DOEPCTL_SD0PID_SEVNFRM; /* DATA0 */
- }
- }
- return HAL_OK;
-}
-
-/**
- * @brief USB_StopDevice : Stop the usb device mode
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx)
-{
- uint32_t i;
-
- /* Clear Pending interrupt */
- for (i = 0; i < 15 ; i++)
- {
- USBx_INEP(i)->DIEPINT = 0xFF;
- USBx_OUTEP(i)->DOEPINT = 0xFF;
- }
- USBx_DEVICE->DAINT = 0xFFFFFFFF;
-
- /* Clear interrupt masks */
- USBx_DEVICE->DIEPMSK = 0;
- USBx_DEVICE->DOEPMSK = 0;
- USBx_DEVICE->DAINTMSK = 0;
-
- /* Flush the FIFO */
- USB_FlushRxFifo(USBx);
- USB_FlushTxFifo(USBx , 0x10 );
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_SetDevAddress : Stop the usb device mode
- * @param USBx : Selected device
- * @param address : new device address to be assigned
- * This parameter can be a value from 0 to 255
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address)
-{
- USBx_DEVICE->DCFG &= ~ (USB_OTG_DCFG_DAD);
- USBx_DEVICE->DCFG |= (address << 4) & USB_OTG_DCFG_DAD ;
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_DevConnect : Connect the USB device by enabling the pull-up/pull-down
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx)
-{
- USBx_DEVICE->DCTL &= ~USB_OTG_DCTL_SDIS ;
- HAL_Delay(3);
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_DevDisconnect : Disconnect the USB device by disabling the pull-up/pull-down
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx)
-{
- USBx_DEVICE->DCTL |= USB_OTG_DCTL_SDIS ;
- HAL_Delay(3);
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_ReadInterrupts: return the global USB interrupt status
- * @param USBx : Selected device
- * @retval HAL status
- */
-uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx)
-{
- uint32_t v = 0;
-
- v = USBx->GINTSTS;
- v &= USBx->GINTMSK;
- return v;
-}
-
-/**
- * @brief USB_ReadDevAllOutEpInterrupt: return the USB device OUT endpoints interrupt status
- * @param USBx : Selected device
- * @retval HAL status
- */
-uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx)
-{
- uint32_t v;
- v = USBx_DEVICE->DAINT;
- v &= USBx_DEVICE->DAINTMSK;
- return ((v & 0xffff0000) >> 16);
-}
-
-/**
- * @brief USB_ReadDevAllInEpInterrupt: return the USB device IN endpoints interrupt status
- * @param USBx : Selected device
- * @retval HAL status
- */
-uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx)
-{
- uint32_t v;
- v = USBx_DEVICE->DAINT;
- v &= USBx_DEVICE->DAINTMSK;
- return ((v & 0xFFFF));
-}
-
-/**
- * @brief Returns Device OUT EP Interrupt register
- * @param USBx : Selected device
- * @param epnum : endpoint number
- * This parameter can be a value from 0 to 15
- * @retval Device OUT EP Interrupt register
- */
-uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum)
-{
- uint32_t v;
- v = USBx_OUTEP(epnum)->DOEPINT;
- v &= USBx_DEVICE->DOEPMSK;
- return v;
-}
-
-/**
- * @brief Returns Device IN EP Interrupt register
- * @param USBx : Selected device
- * @param epnum : endpoint number
- * This parameter can be a value from 0 to 15
- * @retval Device IN EP Interrupt register
- */
-uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum)
-{
- uint32_t v, msk, emp;
-
- msk = USBx_DEVICE->DIEPMSK;
- emp = USBx_DEVICE->DIEPEMPMSK;
- msk |= ((emp >> epnum) & 0x1) << 7;
- v = USBx_INEP(epnum)->DIEPINT & msk;
- return v;
-}
-
-/**
- * @brief USB_ClearInterrupts: clear a USB interrupt
- * @param USBx : Selected device
- * @param interrupt : interrupt flag
- * @retval None
- */
-void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt)
-{
- USBx->GINTSTS |= interrupt;
-}
-
-/**
- * @brief Returns USB core mode
- * @param USBx : Selected device
- * @retval return core mode : Host or Device
- * This parameter can be one of these values:
- * 0 : Host
- * 1 : Device
- */
-uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx)
-{
- return ((USBx->GINTSTS ) & 0x1);
-}
-
-
-/**
- * @brief Activate EP0 for Setup transactions
- * @param USBx : Selected device
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx)
-{
- /* Set the MPS of the IN EP based on the enumeration speed */
- USBx_INEP(0)->DIEPCTL &= ~USB_OTG_DIEPCTL_MPSIZ;
-
- if((USBx_DEVICE->DSTS & USB_OTG_DSTS_ENUMSPD) == DSTS_ENUMSPD_LS_PHY_6MHZ)
- {
- USBx_INEP(0)->DIEPCTL |= 3;
- }
- USBx_DEVICE->DCTL |= USB_OTG_DCTL_CGINAK;
-
- return HAL_OK;
-}
-
-
-/**
- * @brief Prepare the EP0 to start the first control setup
- * @param USBx : Selected device
- * @param dma: USB dma enabled or disabled
- * This parameter can be one of these values:
- * 0 : DMA feature not used
- * 1 : DMA feature used
- * @param psetup : pointer to setup packet
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup)
-{
- USBx_OUTEP(0)->DOEPTSIZ = 0;
- USBx_OUTEP(0)->DOEPTSIZ |= (USB_OTG_DOEPTSIZ_PKTCNT & (1 << 19)) ;
- USBx_OUTEP(0)->DOEPTSIZ |= (3 * 8);
- USBx_OUTEP(0)->DOEPTSIZ |= USB_OTG_DOEPTSIZ_STUPCNT;
-
- if (dma == 1)
- {
- USBx_OUTEP(0)->DOEPDMA = (uint32_t)psetup;
- /* EP enable */
- USBx_OUTEP(0)->DOEPCTL = 0x80008000;
- }
-
- return HAL_OK;
-}
-
-
-/**
- * @brief Reset the USB Core (needed after USB clock settings change)
- * @param USBx : Selected device
- * @retval HAL status
- */
-static HAL_StatusTypeDef USB_CoreReset(USB_OTG_GlobalTypeDef *USBx)
-{
- uint32_t count = 0;
-
- /* Wait for AHB master IDLE state. */
- do
- {
- if (++count > 200000)
- {
- return HAL_TIMEOUT;
- }
- }
- while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_AHBIDL) == 0);
-
- /* Core Soft Reset */
- count = 0;
- USBx->GRSTCTL |= USB_OTG_GRSTCTL_CSRST;
-
- do
- {
- if (++count > 200000)
- {
- return HAL_TIMEOUT;
- }
- }
- while ((USBx->GRSTCTL & USB_OTG_GRSTCTL_CSRST) == USB_OTG_GRSTCTL_CSRST);
-
- return HAL_OK;
-}
-
-
-/**
- * @brief USB_HostInit : Initializes the USB OTG controller registers
- * for Host mode
- * @param USBx : Selected device
- * @param cfg : pointer to a USB_OTG_CfgTypeDef structure that contains
- * the configuration information for the specified USBx peripheral.
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg)
-{
- uint32_t i;
-
- /* Restart the Phy Clock */
- USBx_PCGCCTL = 0;
-
- /* Activate VBUS Sensing B */
-#if defined(STM32F446xx)
- USBx->GCCFG |= USB_OTG_GCCFG_VBDEN;
-#else
- USBx->GCCFG &=~ (USB_OTG_GCCFG_VBUSASEN);
- USBx->GCCFG &=~ (USB_OTG_GCCFG_VBUSBSEN);
- USBx->GCCFG |= USB_OTG_GCCFG_NOVBUSSENS;
-#endif /* STM32F446xx */
-
- /* Disable the FS/LS support mode only */
- if((cfg.speed == USB_OTG_SPEED_FULL)&&
- (USBx != USB_OTG_FS))
- {
- USBx_HOST->HCFG |= USB_OTG_HCFG_FSLSS;
- }
- else
- {
- USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSS);
- }
-
- /* Make sure the FIFOs are flushed. */
- USB_FlushTxFifo(USBx, 0x10 ); /* all Tx FIFOs */
- USB_FlushRxFifo(USBx);
-
- /* Clear all pending HC Interrupts */
- for (i = 0; i < cfg.Host_channels; i++)
- {
- USBx_HC(i)->HCINT = 0xFFFFFFFF;
- USBx_HC(i)->HCINTMSK = 0;
- }
-
- /* Enable VBUS driving */
- USB_DriveVbus(USBx, 1);
-
- HAL_Delay(200);
-
- /* Disable all interrupts. */
- USBx->GINTMSK = 0;
-
- /* Clear any pending interrupts */
- USBx->GINTSTS = 0xFFFFFFFF;
-
- if(USBx == USB_OTG_FS)
- {
- /* set Rx FIFO size */
- USBx->GRXFSIZ = (uint32_t )0x80;
- USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t )(((0x60 << 16)& USB_OTG_NPTXFD) | 0x80);
- USBx->HPTXFSIZ = (uint32_t )(((0x40 << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0xE0);
- }
- else
- {
- /* set Rx FIFO size */
- USBx->GRXFSIZ = (uint32_t )0x200;
- USBx->DIEPTXF0_HNPTXFSIZ = (uint32_t )(((0x100 << 16)& USB_OTG_NPTXFD) | 0x200);
- USBx->HPTXFSIZ = (uint32_t )(((0xE0 << 16)& USB_OTG_HPTXFSIZ_PTXFD) | 0x300);
- }
-
- /* Enable the common interrupts */
- if (cfg.dma_enable == DISABLE)
- {
- USBx->GINTMSK |= USB_OTG_GINTMSK_RXFLVLM;
- }
-
- /* Enable interrupts matching to the Host mode ONLY */
- USBx->GINTMSK |= (USB_OTG_GINTMSK_PRTIM | USB_OTG_GINTMSK_HCIM |\
- USB_OTG_GINTMSK_SOFM |USB_OTG_GINTSTS_DISCINT|\
- USB_OTG_GINTMSK_PXFRM_IISOOXFRM | USB_OTG_GINTMSK_WUIM);
-
- return HAL_OK;
-}
-
-/**
- * @brief USB_InitFSLSPClkSel : Initializes the FSLSPClkSel field of the
- * HCFG register on the PHY type and set the right frame interval
- * @param USBx : Selected device
- * @param freq : clock frequency
- * This parameter can be one of these values:
- * HCFG_48_MHZ : Full Speed 48 MHz Clock
- * HCFG_6_MHZ : Low Speed 6 MHz Clock
- * @retval HAL status
- */
-HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq)
-{
- USBx_HOST->HCFG &= ~(USB_OTG_HCFG_FSLSPCS);
- USBx_HOST->HCFG |= (freq & USB_OTG_HCFG_FSLSPCS);
-
- if (freq == HCFG_48_MHZ)
- {
- USBx_HOST->HFIR = (uint32_t)48000;
- }
- else if (freq == HCFG_6_MHZ)
- {
- USBx_HOST->HFIR = (uint32_t)6000;
- }
- return HAL_OK;
-}
-
-/**
-* @brief USB_OTG_ResetPort : Reset Host Port
- * @param USBx : Selected device
- * @retval HAL status
- * @note (1)The application must wait at least 10 ms
- * before clearing the reset bit.
- */
-HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx)
-{
- __IO uint32_t hprt0;
-
- hprt0 = USBx_HPRT0;
-
- hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
- USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
-
- USBx_HPRT0 = (USB_OTG_HPRT_PRST | hprt0);
- HAL_Delay (10); /* See Note #1 */
- USBx_HPRT0 = ((~USB_OTG_HPRT_PRST) & hprt0);
- return HAL_OK;
-}
-
-/**
- * @brief USB_DriveVbus : activate or de-activate vbus
- * @param state : VBUS state
- * This parameter can be one of these values:
- * 0 : VBUS Active
- * 1 : VBUS Inactive
- * @retval HAL status
-*/
-HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state)
-{
- __IO uint32_t hprt0;
-
- hprt0 = USBx_HPRT0;
- hprt0 &= ~(USB_OTG_HPRT_PENA | USB_OTG_HPRT_PCDET |\
- USB_OTG_HPRT_PENCHNG | USB_OTG_HPRT_POCCHNG );
-
- if (((hprt0 & USB_OTG_HPRT_PPWR) == 0 ) && (state == 1 ))
- {
- USBx_HPRT0 = (USB_OTG_HPRT_PPWR | hprt0);
- }
- if (((hprt0 & USB_OTG_HPRT_PPWR) == USB_OTG_HPRT_PPWR) && (state == 0 ))
- {
- USBx_HPRT0 = ((~USB_OTG_HPRT_PPWR) & hprt0);
- }
- return HAL_OK;
-}
-
-/**
- * @brief Return Host Core speed
- * @param USBx : Selected device
- * @retval speed : Host speed
- * This parameter can be one of these values:
- * @arg USB_OTG_SPEED_HIGH: High speed mode
- * @arg USB_OTG_SPEED_FULL: Full speed mode
- * @arg USB_OTG_SPEED_LOW: Low speed mode
- */
-uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx)
-{
- __IO uint32_t hprt0;
-
- hprt0 = USBx_HPRT0;
- return ((hprt0 & USB_OTG_HPRT_PSPD) >> 17);
-}
-
-/**
- * @brief Return Host Current Frame number
- * @param USBx : Selected device
- * @retval current frame number
-*/
-uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx)
-{
- return (USBx_HOST->HFNUM & USB_OTG_HFNUM_FRNUM);
-}
-
-/**
- * @brief Initialize a host channel
- * @param USBx : Selected device
- * @param ch_num : Channel number
- * This parameter can be a value from 1 to 15
- * @param epnum : Endpoint number
- * This parameter can be a value from 1 to 15
- * @param dev_address : Current device address
- * This parameter can be a value from 0 to 255
- * @param speed : Current device speed
- * This parameter can be one of these values:
- * @arg USB_OTG_SPEED_HIGH: High speed mode
- * @arg USB_OTG_SPEED_FULL: Full speed mode
- * @arg USB_OTG_SPEED_LOW: Low speed mode
- * @param ep_type : Endpoint Type
- * This parameter can be one of these values:
- * @arg EP_TYPE_CTRL: Control type
- * @arg EP_TYPE_ISOC: Isochronous type
- * @arg EP_TYPE_BULK: Bulk type
- * @arg EP_TYPE_INTR: Interrupt type
- * @param mps : Max Packet Size
- * This parameter can be a value from 0 to32K
- * @retval HAL state
- */
-HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx,
- uint8_t ch_num,
- uint8_t epnum,
- uint8_t dev_address,
- uint8_t speed,
- uint8_t ep_type,
- uint16_t mps)
-{
-
- /* Clear old interrupt conditions for this host channel. */
- USBx_HC(ch_num)->HCINT = 0xFFFFFFFF;
-
- /* Enable channel interrupts required for this transfer. */
- switch (ep_type)
- {
- case EP_TYPE_CTRL:
- case EP_TYPE_BULK:
-
- USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\
- USB_OTG_HCINTMSK_STALLM |\
- USB_OTG_HCINTMSK_TXERRM |\
- USB_OTG_HCINTMSK_DTERRM |\
- USB_OTG_HCINTMSK_AHBERR |\
- USB_OTG_HCINTMSK_NAKM ;
-
- if (epnum & 0x80)
- {
- USBx_HC(ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM;
- }
- else
- {
- if(USBx != USB_OTG_FS)
- {
- USBx_HC(ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_NYET | USB_OTG_HCINTMSK_ACKM);
- }
- }
- break;
-
- case EP_TYPE_INTR:
-
- USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\
- USB_OTG_HCINTMSK_STALLM |\
- USB_OTG_HCINTMSK_TXERRM |\
- USB_OTG_HCINTMSK_DTERRM |\
- USB_OTG_HCINTMSK_NAKM |\
- USB_OTG_HCINTMSK_AHBERR |\
- USB_OTG_HCINTMSK_FRMORM ;
-
- if (epnum & 0x80)
- {
- USBx_HC(ch_num)->HCINTMSK |= USB_OTG_HCINTMSK_BBERRM;
- }
-
- break;
- case EP_TYPE_ISOC:
-
- USBx_HC(ch_num)->HCINTMSK = USB_OTG_HCINTMSK_XFRCM |\
- USB_OTG_HCINTMSK_ACKM |\
- USB_OTG_HCINTMSK_AHBERR |\
- USB_OTG_HCINTMSK_FRMORM ;
-
- if (epnum & 0x80)
- {
- USBx_HC(ch_num)->HCINTMSK |= (USB_OTG_HCINTMSK_TXERRM | USB_OTG_HCINTMSK_BBERRM);
- }
- break;
- }
-
- /* Enable the top level host channel interrupt. */
- USBx_HOST->HAINTMSK |= (1 << ch_num);
-
- /* Make sure host channel interrupts are enabled. */
- USBx->GINTMSK |= USB_OTG_GINTMSK_HCIM;
-
- /* Program the HCCHAR register */
- USBx_HC(ch_num)->HCCHAR = (((dev_address << 22) & USB_OTG_HCCHAR_DAD) |\
- (((epnum & 0x7F)<< 11) & USB_OTG_HCCHAR_EPNUM)|\
- ((((epnum & 0x80) == 0x80)<< 15) & USB_OTG_HCCHAR_EPDIR)|\
- (((speed == HPRT0_PRTSPD_LOW_SPEED)<< 17) & USB_OTG_HCCHAR_LSDEV)|\
- ((ep_type << 18) & USB_OTG_HCCHAR_EPTYP)|\
- (mps & USB_OTG_HCCHAR_MPSIZ));
-
- if (ep_type == EP_TYPE_INTR)
- {
- USBx_HC(ch_num)->HCCHAR |= USB_OTG_HCCHAR_ODDFRM ;
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Start a transfer over a host channel
- * @param USBx : Selected device
- * @param hc : pointer to host channel structure
- * @param dma: USB dma enabled or disabled
- * This parameter can be one of these values:
- * 0 : DMA feature not used
- * 1 : DMA feature used
- * @retval HAL state
- */
-#if defined (__CC_ARM) /*!< ARM Compiler */
-#pragma O0
-#elif defined (__GNUC__) /*!< GNU Compiler */
-#pragma GCC optimize ("O0")
-#endif /* __CC_ARM */
-HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma)
-{
- uint8_t is_oddframe = 0;
- uint16_t len_words = 0;
- uint16_t num_packets = 0;
- uint16_t max_hc_pkt_count = 256;
- uint32_t tmpreg = 0;
-
- if((USBx != USB_OTG_FS) && (hc->speed == USB_OTG_SPEED_HIGH))
- {
- if((dma == 0) && (hc->do_ping == 1))
- {
- USB_DoPing(USBx, hc->ch_num);
- return HAL_OK;
- }
- else if(dma == 1)
- {
- USBx_HC(hc->ch_num)->HCINTMSK &= ~(USB_OTG_HCINTMSK_NYET | USB_OTG_HCINTMSK_ACKM);
- hc->do_ping = 0;
- }
- }
-
- /* Compute the expected number of packets associated to the transfer */
- if (hc->xfer_len > 0)
- {
- num_packets = (hc->xfer_len + hc->max_packet - 1) / hc->max_packet;
-
- if (num_packets > max_hc_pkt_count)
- {
- num_packets = max_hc_pkt_count;
- hc->xfer_len = num_packets * hc->max_packet;
- }
- }
- else
- {
- num_packets = 1;
- }
- if (hc->ep_is_in)
- {
- hc->xfer_len = num_packets * hc->max_packet;
- }
-
- /* Initialize the HCTSIZn register */
- USBx_HC(hc->ch_num)->HCTSIZ = (((hc->xfer_len) & USB_OTG_HCTSIZ_XFRSIZ)) |\
- ((num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) |\
- (((hc->data_pid) << 29) & USB_OTG_HCTSIZ_DPID);
-
- if (dma)
- {
- /* xfer_buff MUST be 32-bits aligned */
- USBx_HC(hc->ch_num)->HCDMA = (uint32_t)hc->xfer_buff;
- }
-
- is_oddframe = (USBx_HOST->HFNUM & 0x01) ? 0 : 1;
- USBx_HC(hc->ch_num)->HCCHAR &= ~USB_OTG_HCCHAR_ODDFRM;
- USBx_HC(hc->ch_num)->HCCHAR |= (is_oddframe << 29);
-
- /* Set host channel enable */
- tmpreg = USBx_HC(hc->ch_num)->HCCHAR;
- tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
- tmpreg |= USB_OTG_HCCHAR_CHENA;
- USBx_HC(hc->ch_num)->HCCHAR = tmpreg;
-
- if (dma == 0) /* Slave mode */
- {
- if((hc->ep_is_in == 0) && (hc->xfer_len > 0))
- {
- switch(hc->ep_type)
- {
- /* Non periodic transfer */
- case EP_TYPE_CTRL:
- case EP_TYPE_BULK:
-
- len_words = (hc->xfer_len + 3) / 4;
-
- /* check if there is enough space in FIFO space */
- if(len_words > (USBx->HNPTXSTS & 0xFFFF))
- {
- /* need to process data in nptxfempty interrupt */
- USBx->GINTMSK |= USB_OTG_GINTMSK_NPTXFEM;
- }
- break;
- /* Periodic transfer */
- case EP_TYPE_INTR:
- case EP_TYPE_ISOC:
- len_words = (hc->xfer_len + 3) / 4;
- /* check if there is enough space in FIFO space */
- if(len_words > (USBx_HOST->HPTXSTS & 0xFFFF)) /* split the transfer */
- {
- /* need to process data in ptxfempty interrupt */
- USBx->GINTMSK |= USB_OTG_GINTMSK_PTXFEM;
- }
- break;
-
- default:
- break;
- }
-
- /* Write packet into the Tx FIFO. */
- USB_WritePacket(USBx, hc->xfer_buff, hc->ch_num, hc->xfer_len, 0);
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Read all host channel interrupts status
- * @param USBx : Selected device
- * @retval HAL state
- */
-uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx)
-{
- return ((USBx_HOST->HAINT) & 0xFFFF);
-}
-
-/**
- * @brief Halt a host channel
- * @param USBx : Selected device
- * @param hc_num : Host Channel number
- * This parameter can be a value from 1 to 15
- * @retval HAL state
- */
-HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num)
-{
- uint32_t count = 0;
-
- /* Check for space in the request queue to issue the halt. */
- if (((USBx_HC(hc_num)->HCCHAR) & (HCCHAR_CTRL << 18)) || ((USBx_HC(hc_num)->HCCHAR) & (HCCHAR_BULK << 18)))
- {
- USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHDIS;
-
- if ((USBx->HNPTXSTS & 0xFFFF) == 0)
- {
- USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
- USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
- USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR;
- do
- {
- if (++count > 1000)
- {
- break;
- }
- }
- while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
- }
- else
- {
- USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
- }
- }
- else
- {
- USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHDIS;
-
- if ((USBx_HOST->HPTXSTS & 0xFFFF) == 0)
- {
- USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_CHENA;
- USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
- USBx_HC(hc_num)->HCCHAR &= ~USB_OTG_HCCHAR_EPDIR;
- do
- {
- if (++count > 1000)
- {
- break;
- }
- }
- while ((USBx_HC(hc_num)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
- }
- else
- {
- USBx_HC(hc_num)->HCCHAR |= USB_OTG_HCCHAR_CHENA;
- }
- }
-
- return HAL_OK;
-}
-
-/**
- * @brief Initiate Do Ping protocol
- * @param USBx : Selected device
- * @param hc_num : Host Channel number
- * This parameter can be a value from 1 to 15
- * @retval HAL state
- */
-HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num)
-{
- uint8_t num_packets = 1;
- uint32_t tmpreg = 0;
-
- USBx_HC(ch_num)->HCTSIZ = ((num_packets << 19) & USB_OTG_HCTSIZ_PKTCNT) |\
- USB_OTG_HCTSIZ_DOPING;
-
- /* Set host channel enable */
- tmpreg = USBx_HC(ch_num)->HCCHAR;
- tmpreg &= ~USB_OTG_HCCHAR_CHDIS;
- tmpreg |= USB_OTG_HCCHAR_CHENA;
- USBx_HC(ch_num)->HCCHAR = tmpreg;
-
- return HAL_OK;
-}
-
-/**
- * @brief Stop Host Core
- * @param USBx : Selected device
- * @retval HAL state
- */
-HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx)
-{
- uint8_t i;
- uint32_t count = 0;
- uint32_t value;
-
- USB_DisableGlobalInt(USBx);
-
- /* Flush FIFO */
- USB_FlushTxFifo(USBx, 0x10);
- USB_FlushRxFifo(USBx);
-
- /* Flush out any leftover queued requests. */
- for (i = 0; i <= 15; i++)
- {
-
- value = USBx_HC(i)->HCCHAR ;
- value |= USB_OTG_HCCHAR_CHDIS;
- value &= ~USB_OTG_HCCHAR_CHENA;
- value &= ~USB_OTG_HCCHAR_EPDIR;
- USBx_HC(i)->HCCHAR = value;
- }
-
- /* Halt all channels to put them into a known state. */
- for (i = 0; i <= 15; i++)
- {
- value = USBx_HC(i)->HCCHAR ;
-
- value |= USB_OTG_HCCHAR_CHDIS;
- value |= USB_OTG_HCCHAR_CHENA;
- value &= ~USB_OTG_HCCHAR_EPDIR;
-
- USBx_HC(i)->HCCHAR = value;
- do
- {
- if (++count > 1000)
- {
- break;
- }
- }
- while ((USBx_HC(i)->HCCHAR & USB_OTG_HCCHAR_CHENA) == USB_OTG_HCCHAR_CHENA);
- }
-
- /* Clear any pending Host interrupts */
- USBx_HOST->HAINT = 0xFFFFFFFF;
- USBx->GINTSTS = 0xFFFFFFFF;
- USB_EnableGlobalInt(USBx);
- return HAL_OK;
-}
-/**
- * @}
- */
-
-#endif /* defined (HAL_PCD_MODULE_ENABLED) || defined (HAL_HCD_MODULE_ENABLED) */
-
-/**
- * @}
- */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/