diff options
Diffstat (limited to 'Drivers/STM32F4xx_HAL_Driver/Inc')
67 files changed, 0 insertions, 40081 deletions
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h b/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h deleted file mode 100644 index f7f21f2..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h +++ /dev/null @@ -1,2510 +0,0 @@ -/**
- ******************************************************************************
- * @file stm32_hal_legacy.h
- * @author MCD Application Team
- * @version V1.3.2
- * @date 26-June-2015
- * @brief This file contains aliases definition for the STM32Cube HAL constants
- * macros and functions maintained for legacy purpose.
- ******************************************************************************
- * @attention
- *
- * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2>
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- * 1. Redistributions of source code must retain the above copyright notice,
- * this list of conditions and the following disclaimer.
- * 2. Redistributions in binary form must reproduce the above copyright notice,
- * this list of conditions and the following disclaimer in the documentation
- * and/or other materials provided with the distribution.
- * 3. Neither the name of STMicroelectronics nor the names of its contributors
- * may be used to endorse or promote products derived from this software
- * without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
- * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
- * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
- * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- ******************************************************************************
- */
-
-/* Define to prevent recursive inclusion -------------------------------------*/
-#ifndef __STM32_HAL_LEGACY
-#define __STM32_HAL_LEGACY
-
-#ifdef __cplusplus
- extern "C" {
-#endif
-
-/* Includes ------------------------------------------------------------------*/
-/* Exported types ------------------------------------------------------------*/
-/* Exported constants --------------------------------------------------------*/
-
-/** @defgroup HAL_AES_Aliased_Defines HAL CRYP Aliased Defines maintained for legacy purpose
- * @{
- */
-#define AES_FLAG_RDERR CRYP_FLAG_RDERR
-#define AES_FLAG_WRERR CRYP_FLAG_WRERR
-#define AES_CLEARFLAG_CCF CRYP_CLEARFLAG_CCF
-#define AES_CLEARFLAG_RDERR CRYP_CLEARFLAG_RDERR
-#define AES_CLEARFLAG_WRERR CRYP_CLEARFLAG_WRERR
-
-/**
- * @}
- */
-
-/** @defgroup HAL_ADC_Aliased_Defines HAL ADC Aliased Defines maintained for legacy purpose
- * @{
- */
-#define ADC_RESOLUTION12b ADC_RESOLUTION_12B
-#define ADC_RESOLUTION10b ADC_RESOLUTION_10B
-#define ADC_RESOLUTION8b ADC_RESOLUTION_8B
-#define ADC_RESOLUTION6b ADC_RESOLUTION_6B
-#define OVR_DATA_OVERWRITTEN ADC_OVR_DATA_OVERWRITTEN
-#define OVR_DATA_PRESERVED ADC_OVR_DATA_PRESERVED
-#define EOC_SINGLE_CONV ADC_EOC_SINGLE_CONV
-#define EOC_SEQ_CONV ADC_EOC_SEQ_CONV
-#define EOC_SINGLE_SEQ_CONV ADC_EOC_SINGLE_SEQ_CONV
-#define REGULAR_GROUP ADC_REGULAR_GROUP
-#define INJECTED_GROUP ADC_INJECTED_GROUP
-#define REGULAR_INJECTED_GROUP ADC_REGULAR_INJECTED_GROUP
-#define AWD_EVENT ADC_AWD_EVENT
-#define AWD1_EVENT ADC_AWD1_EVENT
-#define AWD2_EVENT ADC_AWD2_EVENT
-#define AWD3_EVENT ADC_AWD3_EVENT
-#define OVR_EVENT ADC_OVR_EVENT
-#define JQOVF_EVENT ADC_JQOVF_EVENT
-#define ALL_CHANNELS ADC_ALL_CHANNELS
-#define REGULAR_CHANNELS ADC_REGULAR_CHANNELS
-#define INJECTED_CHANNELS ADC_INJECTED_CHANNELS
-#define SYSCFG_FLAG_SENSOR_ADC ADC_FLAG_SENSOR
-#define SYSCFG_FLAG_VREF_ADC ADC_FLAG_VREFINT
-#define ADC_EXTERNALTRIG0_T6_TRGO ADC_EXTERNALTRIGCONV_T6_TRGO
-#define ADC_EXTERNALTRIG1_T21_CC2 ADC_EXTERNALTRIGCONV_T21_CC2
-#define ADC_EXTERNALTRIG2_T2_TRGO ADC_EXTERNALTRIGCONV_T2_TRGO
-#define ADC_EXTERNALTRIG3_T2_CC4 ADC_EXTERNALTRIGCONV_T2_CC4
-#define ADC_EXTERNALTRIG4_T22_TRGO ADC_EXTERNALTRIGCONV_T22_TRGO
-#define ADC_EXTERNALTRIG7_EXT_IT11 ADC_EXTERNALTRIGCONV_EXT_IT11
-#define ADC_CLOCK_ASYNC ADC_CLOCK_ASYNC_DIV1
-#define ADC_EXTERNALTRIG_EDGE_NONE ADC_EXTERNALTRIGCONVEDGE_NONE
-#define ADC_EXTERNALTRIG_EDGE_RISING ADC_EXTERNALTRIGCONVEDGE_RISING
-#define ADC_EXTERNALTRIG_EDGE_FALLING ADC_EXTERNALTRIGCONVEDGE_FALLING
-#define ADC_EXTERNALTRIG_EDGE_RISINGFALLING ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING
-/**
- * @}
- */
-
-/** @defgroup HAL_CEC_Aliased_Defines HAL CEC Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define __HAL_CEC_GET_IT __HAL_CEC_GET_FLAG
-
-/**
- * @}
- */
-
-/** @defgroup HAL_COMP_Aliased_Defines HAL COMP Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define COMP_WINDOWMODE_DISABLED COMP_WINDOWMODE_DISABLE
-#define COMP_WINDOWMODE_ENABLED COMP_WINDOWMODE_ENABLE
-#define COMP_EXTI_LINE_COMP1_EVENT COMP_EXTI_LINE_COMP1
-#define COMP_EXTI_LINE_COMP2_EVENT COMP_EXTI_LINE_COMP2
-
-/**
- * @}
- */
-
-/** @defgroup HAL_CRC_Aliased_Defines HAL CRC Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define CRC_OUTPUTDATA_INVERSION_DISABLED CRC_OUTPUTDATA_INVERSION_DISABLE
-#define CRC_OUTPUTDATA_INVERSION_ENABLED CRC_OUTPUTDATA_INVERSION_ENABLE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_DAC_Aliased_Defines HAL DAC Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define DAC1_CHANNEL_1 DAC_CHANNEL_1
-#define DAC1_CHANNEL_2 DAC_CHANNEL_2
-#define DAC2_CHANNEL_1 DAC_CHANNEL_1
-#define DAC_WAVE_NONE ((uint32_t)0x00000000)
-#define DAC_WAVE_NOISE ((uint32_t)DAC_CR_WAVE1_0)
-#define DAC_WAVE_TRIANGLE ((uint32_t)DAC_CR_WAVE1_1)
-#define DAC_WAVEGENERATION_NONE DAC_WAVE_NONE
-#define DAC_WAVEGENERATION_NOISE DAC_WAVE_NOISE
-#define DAC_WAVEGENERATION_TRIANGLE DAC_WAVE_TRIANGLE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_DMA_Aliased_Defines HAL DMA Aliased Defines maintained for legacy purpose
- * @{
- */
-#define HAL_REMAPDMA_ADC_DMA_CH2 DMA_REMAP_ADC_DMA_CH2
-#define HAL_REMAPDMA_USART1_TX_DMA_CH4 DMA_REMAP_USART1_TX_DMA_CH4
-#define HAL_REMAPDMA_USART1_RX_DMA_CH5 DMA_REMAP_USART1_RX_DMA_CH5
-#define HAL_REMAPDMA_TIM16_DMA_CH4 DMA_REMAP_TIM16_DMA_CH4
-#define HAL_REMAPDMA_TIM17_DMA_CH2 DMA_REMAP_TIM17_DMA_CH2
-#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32
-#define HAL_REMAPDMA_TIM16_DMA_CH6 DMA_REMAP_TIM16_DMA_CH6
-#define HAL_REMAPDMA_TIM17_DMA_CH7 DMA_REMAP_TIM17_DMA_CH7
-#define HAL_REMAPDMA_SPI2_DMA_CH67 DMA_REMAP_SPI2_DMA_CH67
-#define HAL_REMAPDMA_USART2_DMA_CH67 DMA_REMAP_USART2_DMA_CH67
-#define HAL_REMAPDMA_USART3_DMA_CH32 DMA_REMAP_USART3_DMA_CH32
-#define HAL_REMAPDMA_I2C1_DMA_CH76 DMA_REMAP_I2C1_DMA_CH76
-#define HAL_REMAPDMA_TIM1_DMA_CH6 DMA_REMAP_TIM1_DMA_CH6
-#define HAL_REMAPDMA_TIM2_DMA_CH7 DMA_REMAP_TIM2_DMA_CH7
-#define HAL_REMAPDMA_TIM3_DMA_CH6 DMA_REMAP_TIM3_DMA_CH6
-
-#define IS_HAL_REMAPDMA IS_DMA_REMAP
-#define __HAL_REMAPDMA_CHANNEL_ENABLE __HAL_DMA_REMAP_CHANNEL_ENABLE
-#define __HAL_REMAPDMA_CHANNEL_DISABLE __HAL_DMA_REMAP_CHANNEL_DISABLE
-
-
-
-/**
- * @}
- */
-
-/** @defgroup HAL_FLASH_Aliased_Defines HAL FLASH Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define TYPEPROGRAM_BYTE FLASH_TYPEPROGRAM_BYTE
-#define TYPEPROGRAM_HALFWORD FLASH_TYPEPROGRAM_HALFWORD
-#define TYPEPROGRAM_WORD FLASH_TYPEPROGRAM_WORD
-#define TYPEPROGRAM_DOUBLEWORD FLASH_TYPEPROGRAM_DOUBLEWORD
-#define TYPEERASE_SECTORS FLASH_TYPEERASE_SECTORS
-#define TYPEERASE_PAGES FLASH_TYPEERASE_PAGES
-#define TYPEERASE_PAGEERASE FLASH_TYPEERASE_PAGES
-#define TYPEERASE_MASSERASE FLASH_TYPEERASE_MASSERASE
-#define WRPSTATE_DISABLE OB_WRPSTATE_DISABLE
-#define WRPSTATE_ENABLE OB_WRPSTATE_ENABLE
-#define HAL_FLASH_TIMEOUT_VALUE FLASH_TIMEOUT_VALUE
-#define OBEX_PCROP OPTIONBYTE_PCROP
-#define OBEX_BOOTCONFIG OPTIONBYTE_BOOTCONFIG
-#define PCROPSTATE_DISABLE OB_PCROP_STATE_DISABLE
-#define PCROPSTATE_ENABLE OB_PCROP_STATE_ENABLE
-#define TYPEERASEDATA_BYTE FLASH_TYPEERASEDATA_BYTE
-#define TYPEERASEDATA_HALFWORD FLASH_TYPEERASEDATA_HALFWORD
-#define TYPEERASEDATA_WORD FLASH_TYPEERASEDATA_WORD
-#define TYPEPROGRAMDATA_BYTE FLASH_TYPEPROGRAMDATA_BYTE
-#define TYPEPROGRAMDATA_HALFWORD FLASH_TYPEPROGRAMDATA_HALFWORD
-#define TYPEPROGRAMDATA_WORD FLASH_TYPEPROGRAMDATA_WORD
-#define TYPEPROGRAMDATA_FASTBYTE FLASH_TYPEPROGRAMDATA_FASTBYTE
-#define TYPEPROGRAMDATA_FASTHALFWORD FLASH_TYPEPROGRAMDATA_FASTHALFWORD
-#define TYPEPROGRAMDATA_FASTWORD FLASH_TYPEPROGRAMDATA_FASTWORD
-#define PAGESIZE FLASH_PAGE_SIZE
-#define TYPEPROGRAM_FASTBYTE FLASH_TYPEPROGRAM_BYTE
-#define TYPEPROGRAM_FASTHALFWORD FLASH_TYPEPROGRAM_HALFWORD
-#define TYPEPROGRAM_FASTWORD FLASH_TYPEPROGRAM_WORD
-#define VOLTAGE_RANGE_1 FLASH_VOLTAGE_RANGE_1
-#define VOLTAGE_RANGE_2 FLASH_VOLTAGE_RANGE_2
-#define VOLTAGE_RANGE_3 FLASH_VOLTAGE_RANGE_3
-#define VOLTAGE_RANGE_4 FLASH_VOLTAGE_RANGE_4
-#define TYPEPROGRAM_FAST FLASH_TYPEPROGRAM_FAST
-#define TYPEPROGRAM_FAST_AND_LAST FLASH_TYPEPROGRAM_FAST_AND_LAST
-#define WRPAREA_BANK1_AREAA OB_WRPAREA_BANK1_AREAA
-#define WRPAREA_BANK1_AREAB OB_WRPAREA_BANK1_AREAB
-#define WRPAREA_BANK2_AREAA OB_WRPAREA_BANK2_AREAA
-#define WRPAREA_BANK2_AREAB OB_WRPAREA_BANK2_AREAB
-#define IWDG_STDBY_FREEZE OB_IWDG_STDBY_FREEZE
-#define IWDG_STDBY_ACTIVE OB_IWDG_STDBY_RUN
-#define IWDG_STOP_FREEZE OB_IWDG_STOP_FREEZE
-#define IWDG_STOP_ACTIVE OB_IWDG_STOP_RUN
-#define FLASH_ERROR_NONE HAL_FLASH_ERROR_NONE
-#define FLASH_ERROR_RD HAL_FLASH_ERROR_RD
-#define FLASH_ERROR_PG HAL_FLASH_ERROR_PROG
-#define FLASH_ERROR_PGP HAL_FLASH_ERROR_PGS
-#define FLASH_ERROR_WRP HAL_FLASH_ERROR_WRP
-#define FLASH_ERROR_OPTV HAL_FLASH_ERROR_OPTV
-#define FLASH_ERROR_OPTVUSR HAL_FLASH_ERROR_OPTVUSR
-#define FLASH_ERROR_PROG HAL_FLASH_ERROR_PROG
-#define FLASH_ERROR_OP HAL_FLASH_ERROR_OPERATION
-#define FLASH_ERROR_PGA HAL_FLASH_ERROR_PGA
-#define FLASH_ERROR_SIZE HAL_FLASH_ERROR_SIZE
-#define FLASH_ERROR_SIZ HAL_FLASH_ERROR_SIZE
-#define FLASH_ERROR_PGS HAL_FLASH_ERROR_PGS
-#define FLASH_ERROR_MIS HAL_FLASH_ERROR_MIS
-#define FLASH_ERROR_FAST HAL_FLASH_ERROR_FAST
-#define FLASH_ERROR_FWWERR HAL_FLASH_ERROR_FWWERR
-#define FLASH_ERROR_NOTZERO HAL_FLASH_ERROR_NOTZERO
-#define FLASH_ERROR_OPERATION HAL_FLASH_ERROR_OPERATION
-#define FLASH_ERROR_ERS HAL_FLASH_ERROR_ERS
-#define OB_WDG_SW OB_IWDG_SW
-#define OB_WDG_HW OB_IWDG_HW
-
-/**
- * @}
- */
-
-/** @defgroup HAL_SYSCFG_Aliased_Defines HAL SYSCFG Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define SYSCFG_FASTMODEPLUS_I2C_PB6 I2C_FASTMODEPLUS_PB6
-#define SYSCFG_FASTMODEPLUS_I2C_PB7 I2C_FASTMODEPLUS_PB7
-#define SYSCFG_FASTMODEPLUS_I2C_PB8 I2C_FASTMODEPLUS_PB8
-#define SYSCFG_FASTMODEPLUS_I2C_PB9 I2C_FASTMODEPLUS_PB9
-#define SYSCFG_FASTMODEPLUS_I2C1 I2C_FASTMODEPLUS_I2C1
-#define SYSCFG_FASTMODEPLUS_I2C2 I2C_FASTMODEPLUS_I2C2
-#define SYSCFG_FASTMODEPLUS_I2C3 I2C_FASTMODEPLUS_I2C3
-
-/**
- * @}
- */
-
-
-/** @defgroup LL_FMC_Aliased_Defines LL FMC Aliased Defines maintained for compatibility purpose
- * @{
- */
-#if defined(STM32L4) || defined(STM32F7)
-#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE FMC_NAND_WAIT_FEATURE_DISABLE
-#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE FMC_NAND_WAIT_FEATURE_ENABLE
-#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 FMC_NAND_MEM_BUS_WIDTH_8
-#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 FMC_NAND_MEM_BUS_WIDTH_16
-#else
-#define FMC_NAND_WAIT_FEATURE_DISABLE FMC_NAND_PCC_WAIT_FEATURE_DISABLE
-#define FMC_NAND_WAIT_FEATURE_ENABLE FMC_NAND_PCC_WAIT_FEATURE_ENABLE
-#define FMC_NAND_MEM_BUS_WIDTH_8 FMC_NAND_PCC_MEM_BUS_WIDTH_8
-#define FMC_NAND_MEM_BUS_WIDTH_16 FMC_NAND_PCC_MEM_BUS_WIDTH_16
-#endif
-/**
- * @}
- */
-
-/** @defgroup LL_FSMC_Aliased_Defines LL FSMC Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define FSMC_NORSRAM_TYPEDEF FSMC_NORSRAM_TypeDef
-#define FSMC_NORSRAM_EXTENDED_TYPEDEF FSMC_NORSRAM_EXTENDED_TypeDef
-/**
- * @}
- */
-
-/** @defgroup HAL_GPIO_Aliased_Macros HAL GPIO Aliased Macros maintained for legacy purpose
- * @{
- */
-#define GET_GPIO_SOURCE GPIO_GET_INDEX
-#define GET_GPIO_INDEX GPIO_GET_INDEX
-
-#if defined(STM32F4)
-#define GPIO_AF12_SDMMC GPIO_AF12_SDIO
-#define GPIO_AF12_SDMMC1 GPIO_AF12_SDIO
-#endif
-
-#if defined(STM32F7)
-#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1
-#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1
-#endif
-
-#if defined(STM32L4)
-#define GPIO_AF12_SDIO GPIO_AF12_SDMMC1
-#define GPIO_AF12_SDMMC GPIO_AF12_SDMMC1
-#endif
-
-#define GPIO_AF0_LPTIM GPIO_AF0_LPTIM1
-#define GPIO_AF1_LPTIM GPIO_AF1_LPTIM1
-#define GPIO_AF2_LPTIM GPIO_AF2_LPTIM1
-
-/**
- * @}
- */
-
-/** @defgroup HAL_HRTIM_Aliased_Macros HAL HRTIM Aliased Macros maintained for legacy purpose
- * @{
- */
-#define HRTIM_TIMDELAYEDPROTECTION_DISABLED HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DISABLED
-#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_EEV6
-#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_EEV6
-#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV6
-#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV68 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV6
-#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT1_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT1_DEEV7
-#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDOUT2_DEEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDOUT2_DEEV7
-#define HRTIM_TIMDELAYEDPROTECTION_DELAYEDBOTH_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_DELAYEDBOTH_EEV7
-#define HRTIM_TIMDELAYEDPROTECTION_BALANCED_EEV79 HRTIM_TIMER_A_B_C_DELAYEDPROTECTION_BALANCED_EEV7
-/**
- * @}
- */
-
-/** @defgroup HAL_I2C_Aliased_Defines HAL I2C Aliased Defines maintained for legacy purpose
- * @{
- */
-#define I2C_DUALADDRESS_DISABLED I2C_DUALADDRESS_DISABLE
-#define I2C_DUALADDRESS_ENABLED I2C_DUALADDRESS_ENABLE
-#define I2C_GENERALCALL_DISABLED I2C_GENERALCALL_DISABLE
-#define I2C_GENERALCALL_ENABLED I2C_GENERALCALL_ENABLE
-#define I2C_NOSTRETCH_DISABLED I2C_NOSTRETCH_DISABLE
-#define I2C_NOSTRETCH_ENABLED I2C_NOSTRETCH_ENABLE
-#define I2C_ANALOGFILTER_ENABLED I2C_ANALOGFILTER_ENABLE
-#define I2C_ANALOGFILTER_DISABLED I2C_ANALOGFILTER_DISABLE
-/**
- * @}
- */
-
-/** @defgroup HAL_IRDA_Aliased_Defines HAL IRDA Aliased Defines maintained for legacy purpose
- * @{
- */
-#define IRDA_ONE_BIT_SAMPLE_DISABLED IRDA_ONE_BIT_SAMPLE_DISABLE
-#define IRDA_ONE_BIT_SAMPLE_ENABLED IRDA_ONE_BIT_SAMPLE_ENABLE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_IWDG_Aliased_Defines HAL IWDG Aliased Defines maintained for legacy purpose
- * @{
- */
-#define KR_KEY_RELOAD IWDG_KEY_RELOAD
-#define KR_KEY_ENABLE IWDG_KEY_ENABLE
-#define KR_KEY_EWA IWDG_KEY_WRITE_ACCESS_ENABLE
-#define KR_KEY_DWA IWDG_KEY_WRITE_ACCESS_DISABLE
-/**
- * @}
- */
-
-/** @defgroup HAL_LPTIM_Aliased_Defines HAL LPTIM Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define LPTIM_CLOCKSAMPLETIME_DIRECTTRANSISTION LPTIM_CLOCKSAMPLETIME_DIRECTTRANSITION
-#define LPTIM_CLOCKSAMPLETIME_2TRANSISTIONS LPTIM_CLOCKSAMPLETIME_2TRANSITIONS
-#define LPTIM_CLOCKSAMPLETIME_4TRANSISTIONS LPTIM_CLOCKSAMPLETIME_4TRANSITIONS
-#define LPTIM_CLOCKSAMPLETIME_8TRANSISTIONS LPTIM_CLOCKSAMPLETIME_8TRANSITIONS
-
-#define LPTIM_CLOCKPOLARITY_RISINGEDGE LPTIM_CLOCKPOLARITY_RISING
-#define LPTIM_CLOCKPOLARITY_FALLINGEDGE LPTIM_CLOCKPOLARITY_FALLING
-#define LPTIM_CLOCKPOLARITY_BOTHEDGES LPTIM_CLOCKPOLARITY_RISING_FALLING
-
-#define LPTIM_TRIGSAMPLETIME_DIRECTTRANSISTION LPTIM_TRIGSAMPLETIME_DIRECTTRANSITION
-#define LPTIM_TRIGSAMPLETIME_2TRANSISTIONS LPTIM_TRIGSAMPLETIME_2TRANSITIONS
-#define LPTIM_TRIGSAMPLETIME_4TRANSISTIONS LPTIM_TRIGSAMPLETIME_4TRANSITIONS
-#define LPTIM_TRIGSAMPLETIME_8TRANSISTIONS LPTIM_TRIGSAMPLETIME_8TRANSITIONS
-
-/* The following 3 definition have also been present in a temporary version of lptim.h */
-/* They need to be renamed also to the right name, just in case */
-#define LPTIM_TRIGSAMPLETIME_2TRANSITION LPTIM_TRIGSAMPLETIME_2TRANSITIONS
-#define LPTIM_TRIGSAMPLETIME_4TRANSITION LPTIM_TRIGSAMPLETIME_4TRANSITIONS
-#define LPTIM_TRIGSAMPLETIME_8TRANSITION LPTIM_TRIGSAMPLETIME_8TRANSITIONS
-
-/**
- * @}
- */
-
-/** @defgroup HAL_NAND_Aliased_Defines HAL NAND Aliased Defines maintained for legacy purpose
- * @{
- */
-#define NAND_AddressTypedef NAND_AddressTypeDef
-
-#define __ARRAY_ADDRESS ARRAY_ADDRESS
-#define __ADDR_1st_CYCLE ADDR_1ST_CYCLE
-#define __ADDR_2nd_CYCLE ADDR_2ND_CYCLE
-#define __ADDR_3rd_CYCLE ADDR_3RD_CYCLE
-#define __ADDR_4th_CYCLE ADDR_4TH_CYCLE
-/**
- * @}
- */
-
-/** @defgroup HAL_NOR_Aliased_Defines HAL NOR Aliased Defines maintained for legacy purpose
- * @{
- */
-#define NOR_StatusTypedef HAL_NOR_StatusTypeDef
-#define NOR_SUCCESS HAL_NOR_STATUS_SUCCESS
-#define NOR_ONGOING HAL_NOR_STATUS_ONGOING
-#define NOR_ERROR HAL_NOR_STATUS_ERROR
-#define NOR_TIMEOUT HAL_NOR_STATUS_TIMEOUT
-
-#define __NOR_WRITE NOR_WRITE
-#define __NOR_ADDR_SHIFT NOR_ADDR_SHIFT
-/**
- * @}
- */
-
-/** @defgroup HAL_OPAMP_Aliased_Defines HAL OPAMP Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define OPAMP_NONINVERTINGINPUT_VP0 OPAMP_NONINVERTINGINPUT_IO0
-#define OPAMP_NONINVERTINGINPUT_VP1 OPAMP_NONINVERTINGINPUT_IO1
-#define OPAMP_NONINVERTINGINPUT_VP2 OPAMP_NONINVERTINGINPUT_IO2
-#define OPAMP_NONINVERTINGINPUT_VP3 OPAMP_NONINVERTINGINPUT_IO3
-
-#define OPAMP_SEC_NONINVERTINGINPUT_VP0 OPAMP_SEC_NONINVERTINGINPUT_IO0
-#define OPAMP_SEC_NONINVERTINGINPUT_VP1 OPAMP_SEC_NONINVERTINGINPUT_IO1
-#define OPAMP_SEC_NONINVERTINGINPUT_VP2 OPAMP_SEC_NONINVERTINGINPUT_IO2
-#define OPAMP_SEC_NONINVERTINGINPUT_VP3 OPAMP_SEC_NONINVERTINGINPUT_IO3
-
-#define OPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0
-#define OPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1
-
-#define IOPAMP_INVERTINGINPUT_VM0 OPAMP_INVERTINGINPUT_IO0
-#define IOPAMP_INVERTINGINPUT_VM1 OPAMP_INVERTINGINPUT_IO1
-
-#define OPAMP_SEC_INVERTINGINPUT_VM0 OPAMP_SEC_INVERTINGINPUT_IO0
-#define OPAMP_SEC_INVERTINGINPUT_VM1 OPAMP_SEC_INVERTINGINPUT_IO1
-
-#define OPAMP_INVERTINGINPUT_VINM OPAMP_SEC_INVERTINGINPUT_IO1
-
-#define OPAMP_PGACONNECT_NO OPAMP_PGA_CONNECT_INVERTINGINPUT_NO
-#define OPAMP_PGACONNECT_VM0 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO0
-#define OPAMP_PGACONNECT_VM1 OPAMP_PGA_CONNECT_INVERTINGINPUT_IO1
-
-/**
- * @}
- */
-
-/** @defgroup HAL_I2S_Aliased_Defines HAL I2S Aliased Defines maintained for legacy purpose
- * @{
- */
-#define I2S_STANDARD_PHILLIPS I2S_STANDARD_PHILIPS
-/**
- * @}
- */
-
-/** @defgroup HAL_PCCARD_Aliased_Defines HAL PCCARD Aliased Defines maintained for legacy purpose
- * @{
- */
-
-/* Compact Flash-ATA registers description */
-#define CF_DATA ATA_DATA
-#define CF_SECTOR_COUNT ATA_SECTOR_COUNT
-#define CF_SECTOR_NUMBER ATA_SECTOR_NUMBER
-#define CF_CYLINDER_LOW ATA_CYLINDER_LOW
-#define CF_CYLINDER_HIGH ATA_CYLINDER_HIGH
-#define CF_CARD_HEAD ATA_CARD_HEAD
-#define CF_STATUS_CMD ATA_STATUS_CMD
-#define CF_STATUS_CMD_ALTERNATE ATA_STATUS_CMD_ALTERNATE
-#define CF_COMMON_DATA_AREA ATA_COMMON_DATA_AREA
-
-/* Compact Flash-ATA commands */
-#define CF_READ_SECTOR_CMD ATA_READ_SECTOR_CMD
-#define CF_WRITE_SECTOR_CMD ATA_WRITE_SECTOR_CMD
-#define CF_ERASE_SECTOR_CMD ATA_ERASE_SECTOR_CMD
-#define CF_IDENTIFY_CMD ATA_IDENTIFY_CMD
-
-#define PCCARD_StatusTypedef HAL_PCCARD_StatusTypeDef
-#define PCCARD_SUCCESS HAL_PCCARD_STATUS_SUCCESS
-#define PCCARD_ONGOING HAL_PCCARD_STATUS_ONGOING
-#define PCCARD_ERROR HAL_PCCARD_STATUS_ERROR
-#define PCCARD_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT
-/**
- * @}
- */
-
-/** @defgroup HAL_RTC_Aliased_Defines HAL RTC Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define FORMAT_BIN RTC_FORMAT_BIN
-#define FORMAT_BCD RTC_FORMAT_BCD
-
-#define RTC_ALARMSUBSECONDMASK_None RTC_ALARMSUBSECONDMASK_NONE
-#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE
-#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE
-#define RTC_TAMPERMASK_FLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
-#define RTC_TAMPERMASK_FLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
-
-#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
-#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
-#define RTC_TAMPERERASEBACKUP_ENABLED RTC_TAMPER_ERASE_BACKUP_ENABLE
-#define RTC_TAMPERERASEBACKUP_DISABLED RTC_TAMPER_ERASE_BACKUP_DISABLE
-#define RTC_MASKTAMPERFLAG_DISABLED RTC_TAMPERMASK_FLAG_DISABLE
-#define RTC_MASKTAMPERFLAG_ENABLED RTC_TAMPERMASK_FLAG_ENABLE
-#define RTC_TAMPER1_2_INTERRUPT RTC_ALL_TAMPER_INTERRUPT
-#define RTC_TAMPER1_2_3_INTERRUPT RTC_ALL_TAMPER_INTERRUPT
-
-#define RTC_TIMESTAMPPIN_PC13 RTC_TIMESTAMPPIN_DEFAULT
-#define RTC_TIMESTAMPPIN_PA0 RTC_TIMESTAMPPIN_POS1
-#define RTC_TIMESTAMPPIN_PI8 RTC_TIMESTAMPPIN_POS1
-#define RTC_TIMESTAMPPIN_PC1 RTC_TIMESTAMPPIN_POS2
-
-#define RTC_OUTPUT_REMAP_PC13 RTC_OUTPUT_REMAP_NONE
-#define RTC_OUTPUT_REMAP_PB14 RTC_OUTPUT_REMAP_POS1
-#define RTC_OUTPUT_REMAP_PB2 RTC_OUTPUT_REMAP_POS1
-
-#define RTC_TAMPERPIN_PC13 RTC_TAMPERPIN_DEFAULT
-#define RTC_TAMPERPIN_PA0 RTC_TAMPERPIN_POS1
-#define RTC_TAMPERPIN_PI8 RTC_TAMPERPIN_POS1
-
-/**
- * @}
- */
-
-
-/** @defgroup HAL_SMARTCARD_Aliased_Defines HAL SMARTCARD Aliased Defines maintained for legacy purpose
- * @{
- */
-#define SMARTCARD_NACK_ENABLED SMARTCARD_NACK_ENABLE
-#define SMARTCARD_NACK_DISABLED SMARTCARD_NACK_DISABLE
-
-#define SMARTCARD_ONEBIT_SAMPLING_DISABLED SMARTCARD_ONE_BIT_SAMPLE_DISABLE
-#define SMARTCARD_ONEBIT_SAMPLING_ENABLED SMARTCARD_ONE_BIT_SAMPLE_ENABLE
-#define SMARTCARD_ONEBIT_SAMPLING_DISABLE SMARTCARD_ONE_BIT_SAMPLE_DISABLE
-#define SMARTCARD_ONEBIT_SAMPLING_ENABLE SMARTCARD_ONE_BIT_SAMPLE_ENABLE
-
-#define SMARTCARD_TIMEOUT_DISABLED SMARTCARD_TIMEOUT_DISABLE
-#define SMARTCARD_TIMEOUT_ENABLED SMARTCARD_TIMEOUT_ENABLE
-
-#define SMARTCARD_LASTBIT_DISABLED SMARTCARD_LASTBIT_DISABLE
-#define SMARTCARD_LASTBIT_ENABLED SMARTCARD_LASTBIT_ENABLE
-/**
- * @}
- */
-
-
- /** @defgroup HAL_SMBUS_Aliased_Defines HAL SMBUS Aliased Defines maintained for legacy purpose
- * @{
- */
-#define SMBUS_DUALADDRESS_DISABLED SMBUS_DUALADDRESS_DISABLE
-#define SMBUS_DUALADDRESS_ENABLED SMBUS_DUALADDRESS_ENABLE
-#define SMBUS_GENERALCALL_DISABLED SMBUS_GENERALCALL_DISABLE
-#define SMBUS_GENERALCALL_ENABLED SMBUS_GENERALCALL_ENABLE
-#define SMBUS_NOSTRETCH_DISABLED SMBUS_NOSTRETCH_DISABLE
-#define SMBUS_NOSTRETCH_ENABLED SMBUS_NOSTRETCH_ENABLE
-#define SMBUS_ANALOGFILTER_ENABLED SMBUS_ANALOGFILTER_ENABLE
-#define SMBUS_ANALOGFILTER_DISABLED SMBUS_ANALOGFILTER_DISABLE
-#define SMBUS_PEC_DISABLED SMBUS_PEC_DISABLE
-#define SMBUS_PEC_ENABLED SMBUS_PEC_ENABLE
-#define HAL_SMBUS_STATE_SLAVE_LISTEN HAL_SMBUS_STATE_LISTEN
-/**
- * @}
- */
-
- /** @defgroup HAL_SPI_Aliased_Defines HAL SPI Aliased Defines maintained for legacy purpose
- * @{
- */
-#define SPI_TIMODE_DISABLED SPI_TIMODE_DISABLE
-#define SPI_TIMODE_ENABLED SPI_TIMODE_ENABLE
-
-#define SPI_CRCCALCULATION_DISABLED SPI_CRCCALCULATION_DISABLE
-#define SPI_CRCCALCULATION_ENABLED SPI_CRCCALCULATION_ENABLE
-
-#define SPI_NSS_PULSE_DISABLED SPI_NSS_PULSE_DISABLE
-#define SPI_NSS_PULSE_ENABLED SPI_NSS_PULSE_ENABLE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_TIM_Aliased_Defines HAL TIM Aliased Defines maintained for legacy purpose
- * @{
- */
-#define CCER_CCxE_MASK TIM_CCER_CCxE_MASK
-#define CCER_CCxNE_MASK TIM_CCER_CCxNE_MASK
-
-#define TIM_DMABase_CR1 TIM_DMABASE_CR1
-#define TIM_DMABase_CR2 TIM_DMABASE_CR2
-#define TIM_DMABase_SMCR TIM_DMABASE_SMCR
-#define TIM_DMABase_DIER TIM_DMABASE_DIER
-#define TIM_DMABase_SR TIM_DMABASE_SR
-#define TIM_DMABase_EGR TIM_DMABASE_EGR
-#define TIM_DMABase_CCMR1 TIM_DMABASE_CCMR1
-#define TIM_DMABase_CCMR2 TIM_DMABASE_CCMR2
-#define TIM_DMABase_CCER TIM_DMABASE_CCER
-#define TIM_DMABase_CNT TIM_DMABASE_CNT
-#define TIM_DMABase_PSC TIM_DMABASE_PSC
-#define TIM_DMABase_ARR TIM_DMABASE_ARR
-#define TIM_DMABase_RCR TIM_DMABASE_RCR
-#define TIM_DMABase_CCR1 TIM_DMABASE_CCR1
-#define TIM_DMABase_CCR2 TIM_DMABASE_CCR2
-#define TIM_DMABase_CCR3 TIM_DMABASE_CCR3
-#define TIM_DMABase_CCR4 TIM_DMABASE_CCR4
-#define TIM_DMABase_BDTR TIM_DMABASE_BDTR
-#define TIM_DMABase_DCR TIM_DMABASE_DCR
-#define TIM_DMABase_DMAR TIM_DMABASE_DMAR
-#define TIM_DMABase_OR1 TIM_DMABASE_OR1
-#define TIM_DMABase_CCMR3 TIM_DMABASE_CCMR3
-#define TIM_DMABase_CCR5 TIM_DMABASE_CCR5
-#define TIM_DMABase_CCR6 TIM_DMABASE_CCR6
-#define TIM_DMABase_OR2 TIM_DMABASE_OR2
-#define TIM_DMABase_OR3 TIM_DMABASE_OR3
-#define TIM_DMABase_OR TIM_DMABASE_OR
-
-#define TIM_EventSource_Update TIM_EVENTSOURCE_UPDATE
-#define TIM_EventSource_CC1 TIM_EVENTSOURCE_CC1
-#define TIM_EventSource_CC2 TIM_EVENTSOURCE_CC2
-#define TIM_EventSource_CC3 TIM_EVENTSOURCE_CC3
-#define TIM_EventSource_CC4 TIM_EVENTSOURCE_CC4
-#define TIM_EventSource_COM TIM_EVENTSOURCE_COM
-#define TIM_EventSource_Trigger TIM_EVENTSOURCE_TRIGGER
-#define TIM_EventSource_Break TIM_EVENTSOURCE_BREAK
-#define TIM_EventSource_Break2 TIM_EVENTSOURCE_BREAK2
-
-#define TIM_DMABurstLength_1Transfer TIM_DMABURSTLENGTH_1TRANSFER
-#define TIM_DMABurstLength_2Transfers TIM_DMABURSTLENGTH_2TRANSFERS
-#define TIM_DMABurstLength_3Transfers TIM_DMABURSTLENGTH_3TRANSFERS
-#define TIM_DMABurstLength_4Transfers TIM_DMABURSTLENGTH_4TRANSFERS
-#define TIM_DMABurstLength_5Transfers TIM_DMABURSTLENGTH_5TRANSFERS
-#define TIM_DMABurstLength_6Transfers TIM_DMABURSTLENGTH_6TRANSFERS
-#define TIM_DMABurstLength_7Transfers TIM_DMABURSTLENGTH_7TRANSFERS
-#define TIM_DMABurstLength_8Transfers TIM_DMABURSTLENGTH_8TRANSFERS
-#define TIM_DMABurstLength_9Transfers TIM_DMABURSTLENGTH_9TRANSFERS
-#define TIM_DMABurstLength_10Transfers TIM_DMABURSTLENGTH_10TRANSFERS
-#define TIM_DMABurstLength_11Transfers TIM_DMABURSTLENGTH_11TRANSFERS
-#define TIM_DMABurstLength_12Transfers TIM_DMABURSTLENGTH_12TRANSFERS
-#define TIM_DMABurstLength_13Transfers TIM_DMABURSTLENGTH_13TRANSFERS
-#define TIM_DMABurstLength_14Transfers TIM_DMABURSTLENGTH_14TRANSFERS
-#define TIM_DMABurstLength_15Transfers TIM_DMABURSTLENGTH_15TRANSFERS
-#define TIM_DMABurstLength_16Transfers TIM_DMABURSTLENGTH_16TRANSFERS
-#define TIM_DMABurstLength_17Transfers TIM_DMABURSTLENGTH_17TRANSFERS
-#define TIM_DMABurstLength_18Transfers TIM_DMABURSTLENGTH_18TRANSFERS
-
-/**
- * @}
- */
-
-/** @defgroup HAL_TSC_Aliased_Defines HAL TSC Aliased Defines maintained for legacy purpose
- * @{
- */
-#define TSC_SYNC_POL_FALL TSC_SYNC_POLARITY_FALLING
-#define TSC_SYNC_POL_RISE_HIGH TSC_SYNC_POLARITY_RISING
-/**
- * @}
- */
-
-/** @defgroup HAL_UART_Aliased_Defines HAL UART Aliased Defines maintained for legacy purpose
- * @{
- */
-#define UART_ONEBIT_SAMPLING_DISABLED UART_ONE_BIT_SAMPLE_DISABLE
-#define UART_ONEBIT_SAMPLING_ENABLED UART_ONE_BIT_SAMPLE_ENABLE
-#define UART_ONE_BIT_SAMPLE_DISABLED UART_ONE_BIT_SAMPLE_DISABLE
-#define UART_ONE_BIT_SAMPLE_ENABLED UART_ONE_BIT_SAMPLE_ENABLE
-
-#define __HAL_UART_ONEBIT_ENABLE __HAL_UART_ONE_BIT_SAMPLE_ENABLE
-#define __HAL_UART_ONEBIT_DISABLE __HAL_UART_ONE_BIT_SAMPLE_DISABLE
-
-#define __DIV_SAMPLING16 UART_DIV_SAMPLING16
-#define __DIVMANT_SAMPLING16 UART_DIVMANT_SAMPLING16
-#define __DIVFRAQ_SAMPLING16 UART_DIVFRAQ_SAMPLING16
-#define __UART_BRR_SAMPLING16 UART_BRR_SAMPLING16
-
-#define __DIV_SAMPLING8 UART_DIV_SAMPLING8
-#define __DIVMANT_SAMPLING8 UART_DIVMANT_SAMPLING8
-#define __DIVFRAQ_SAMPLING8 UART_DIVFRAQ_SAMPLING8
-#define __UART_BRR_SAMPLING8 UART_BRR_SAMPLING8
-
-#define UART_WAKEUPMETHODE_IDLELINE UART_WAKEUPMETHOD_IDLELINE
-#define UART_WAKEUPMETHODE_ADDRESSMARK UART_WAKEUPMETHOD_ADDRESSMARK
-
-/**
- * @}
- */
-
-
-/** @defgroup HAL_USART_Aliased_Defines HAL USART Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define USART_CLOCK_DISABLED USART_CLOCK_DISABLE
-#define USART_CLOCK_ENABLED USART_CLOCK_ENABLE
-
-#define USARTNACK_ENABLED USART_NACK_ENABLE
-#define USARTNACK_DISABLED USART_NACK_DISABLE
-/**
- * @}
- */
-
-/** @defgroup HAL_WWDG_Aliased_Defines HAL WWDG Aliased Defines maintained for legacy purpose
- * @{
- */
-#define CFR_BASE WWDG_CFR_BASE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_CAN_Aliased_Defines HAL CAN Aliased Defines maintained for legacy purpose
- * @{
- */
-#define CAN_FilterFIFO0 CAN_FILTER_FIFO0
-#define CAN_FilterFIFO1 CAN_FILTER_FIFO1
-#define CAN_IT_RQCP0 CAN_IT_TME
-#define CAN_IT_RQCP1 CAN_IT_TME
-#define CAN_IT_RQCP2 CAN_IT_TME
-#define INAK_TIMEOUT CAN_TIMEOUT_VALUE
-#define SLAK_TIMEOUT CAN_TIMEOUT_VALUE
-#define CAN_TXSTATUS_FAILED ((uint8_t)0x00)
-#define CAN_TXSTATUS_OK ((uint8_t)0x01)
-#define CAN_TXSTATUS_PENDING ((uint8_t)0x02)
-
-/**
- * @}
- */
-
-/** @defgroup HAL_ETH_Aliased_Defines HAL ETH Aliased Defines maintained for legacy purpose
- * @{
- */
-
-#define VLAN_TAG ETH_VLAN_TAG
-#define MIN_ETH_PAYLOAD ETH_MIN_ETH_PAYLOAD
-#define MAX_ETH_PAYLOAD ETH_MAX_ETH_PAYLOAD
-#define JUMBO_FRAME_PAYLOAD ETH_JUMBO_FRAME_PAYLOAD
-#define MACMIIAR_CR_MASK ETH_MACMIIAR_CR_MASK
-#define MACCR_CLEAR_MASK ETH_MACCR_CLEAR_MASK
-#define MACFCR_CLEAR_MASK ETH_MACFCR_CLEAR_MASK
-#define DMAOMR_CLEAR_MASK ETH_DMAOMR_CLEAR_MASK
-
-#define ETH_MMCCR ((uint32_t)0x00000100)
-#define ETH_MMCRIR ((uint32_t)0x00000104)
-#define ETH_MMCTIR ((uint32_t)0x00000108)
-#define ETH_MMCRIMR ((uint32_t)0x0000010C)
-#define ETH_MMCTIMR ((uint32_t)0x00000110)
-#define ETH_MMCTGFSCCR ((uint32_t)0x0000014C)
-#define ETH_MMCTGFMSCCR ((uint32_t)0x00000150)
-#define ETH_MMCTGFCR ((uint32_t)0x00000168)
-#define ETH_MMCRFCECR ((uint32_t)0x00000194)
-#define ETH_MMCRFAECR ((uint32_t)0x00000198)
-#define ETH_MMCRGUFCR ((uint32_t)0x000001C4)
-
-/**
- * @}
- */
-
-/** @defgroup HAL_PPP_Aliased_Defines HAL PPP Aliased Defines maintained for legacy purpose
- * @{
- */
-
-/**
- * @}
- */
-
-/* Exported functions --------------------------------------------------------*/
-
-/** @defgroup HAL_CRYP_Aliased_Functions HAL CRYP Aliased Functions maintained for legacy purpose
- * @{
- */
-#define HAL_CRYP_ComputationCpltCallback HAL_CRYPEx_ComputationCpltCallback
-/**
- * @}
- */
-
-/** @defgroup HAL_HASH_Aliased_Functions HAL HASH Aliased Functions maintained for legacy purpose
- * @{
- */
-
-#define HAL_HMAC_MD5_Finish HAL_HASH_MD5_Finish
-#define HAL_HMAC_SHA1_Finish HAL_HASH_SHA1_Finish
-#define HAL_HMAC_SHA224_Finish HAL_HASH_SHA224_Finish
-#define HAL_HMAC_SHA256_Finish HAL_HASH_SHA256_Finish
-
-/*HASH Algorithm Selection*/
-
-#define HASH_AlgoSelection_SHA1 HASH_ALGOSELECTION_SHA1
-#define HASH_AlgoSelection_SHA224 HASH_ALGOSELECTION_SHA224
-#define HASH_AlgoSelection_SHA256 HASH_ALGOSELECTION_SHA256
-#define HASH_AlgoSelection_MD5 HASH_ALGOSELECTION_MD5
-
-#define HASH_AlgoMode_HASH HASH_ALGOMODE_HASH
-#define HASH_AlgoMode_HMAC HASH_ALGOMODE_HMAC
-
-#define HASH_HMACKeyType_ShortKey HASH_HMAC_KEYTYPE_SHORTKEY
-#define HASH_HMACKeyType_LongKey HASH_HMAC_KEYTYPE_LONGKEY
-/**
- * @}
- */
-
-/** @defgroup HAL_Aliased_Functions HAL Generic Aliased Functions maintained for legacy purpose
- * @{
- */
-#define HAL_EnableDBGSleepMode HAL_DBGMCU_EnableDBGSleepMode
-#define HAL_DisableDBGSleepMode HAL_DBGMCU_DisableDBGSleepMode
-#define HAL_EnableDBGStopMode HAL_DBGMCU_EnableDBGStopMode
-#define HAL_DisableDBGStopMode HAL_DBGMCU_DisableDBGStopMode
-#define HAL_EnableDBGStandbyMode HAL_DBGMCU_EnableDBGStandbyMode
-#define HAL_DisableDBGStandbyMode HAL_DBGMCU_DisableDBGStandbyMode
-#define HAL_DBG_LowPowerConfig(Periph, cmd) (((cmd)==ENABLE)? HAL_DBGMCU_DBG_EnableLowPowerConfig(Periph) : HAL_DBGMCU_DBG_DisableLowPowerConfig(Periph))
-#define HAL_VREFINT_OutputSelect HAL_SYSCFG_VREFINT_OutputSelect
-#define HAL_Lock_Cmd(cmd) (((cmd)==ENABLE) ? HAL_SYSCFG_Enable_Lock_VREFINT() : HAL_SYSCFG_Disable_Lock_VREFINT())
-#define HAL_VREFINT_Cmd(cmd) (((cmd)==ENABLE)? HAL_SYSCFG_EnableVREFINT() : HAL_SYSCFG_DisableVREFINT())
-#define HAL_ADC_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINT() : HAL_ADCEx_DisableVREFINT())
-#define HAL_ADC_EnableBufferSensor_Cmd(cmd) (((cmd)==ENABLE) ? HAL_ADCEx_EnableVREFINTTempSensor() : HAL_ADCEx_DisableVREFINTTempSensor())
-/**
- * @}
- */
-
-/** @defgroup HAL_FLASH_Aliased_Functions HAL FLASH Aliased Functions maintained for legacy purpose
- * @{
- */
-#define FLASH_HalfPageProgram HAL_FLASHEx_HalfPageProgram
-#define FLASH_EnableRunPowerDown HAL_FLASHEx_EnableRunPowerDown
-#define FLASH_DisableRunPowerDown HAL_FLASHEx_DisableRunPowerDown
-#define HAL_DATA_EEPROMEx_Unlock HAL_FLASHEx_DATAEEPROM_Unlock
-#define HAL_DATA_EEPROMEx_Lock HAL_FLASHEx_DATAEEPROM_Lock
-#define HAL_DATA_EEPROMEx_Erase HAL_FLASHEx_DATAEEPROM_Erase
-#define HAL_DATA_EEPROMEx_Program HAL_FLASHEx_DATAEEPROM_Program
-
- /**
- * @}
- */
-
-/** @defgroup HAL_I2C_Aliased_Functions HAL I2C Aliased Functions maintained for legacy purpose
- * @{
- */
-#define HAL_I2CEx_AnalogFilter_Config HAL_I2CEx_ConfigAnalogFilter
-#define HAL_I2CEx_DigitalFilter_Config HAL_I2CEx_ConfigDigitalFilter
-
-#define HAL_I2CFastModePlusConfig(SYSCFG_I2CFastModePlus, cmd) (((cmd)==ENABLE)? HAL_I2CEx_EnableFastModePlus(SYSCFG_I2CFastModePlus): HAL_I2CEx_DisableFastModePlus(SYSCFG_I2CFastModePlus))
- /**
- * @}
- */
-
-/** @defgroup HAL_PWR_Aliased HAL PWR Aliased maintained for legacy purpose
- * @{
- */
-#define HAL_PWR_PVDConfig HAL_PWR_ConfigPVD
-#define HAL_PWR_DisableBkUpReg HAL_PWREx_DisableBkUpReg
-#define HAL_PWR_DisableFlashPowerDown HAL_PWREx_DisableFlashPowerDown
-#define HAL_PWR_DisableVddio2Monitor HAL_PWREx_DisableVddio2Monitor
-#define HAL_PWR_EnableBkUpReg HAL_PWREx_EnableBkUpReg
-#define HAL_PWR_EnableFlashPowerDown HAL_PWREx_EnableFlashPowerDown
-#define HAL_PWR_EnableVddio2Monitor HAL_PWREx_EnableVddio2Monitor
-#define HAL_PWR_PVD_PVM_IRQHandler HAL_PWREx_PVD_PVM_IRQHandler
-#define HAL_PWR_PVDLevelConfig HAL_PWR_ConfigPVD
-#define HAL_PWR_Vddio2Monitor_IRQHandler HAL_PWREx_Vddio2Monitor_IRQHandler
-#define HAL_PWR_Vddio2MonitorCallback HAL_PWREx_Vddio2MonitorCallback
-#define HAL_PWREx_ActivateOverDrive HAL_PWREx_EnableOverDrive
-#define HAL_PWREx_DeactivateOverDrive HAL_PWREx_DisableOverDrive
-#define HAL_PWREx_DisableSDADCAnalog HAL_PWREx_DisableSDADC
-#define HAL_PWREx_EnableSDADCAnalog HAL_PWREx_EnableSDADC
-#define HAL_PWREx_PVMConfig HAL_PWREx_ConfigPVM
-
-#define PWR_MODE_NORMAL PWR_PVD_MODE_NORMAL
-#define PWR_MODE_IT_RISING PWR_PVD_MODE_IT_RISING
-#define PWR_MODE_IT_FALLING PWR_PVD_MODE_IT_FALLING
-#define PWR_MODE_IT_RISING_FALLING PWR_PVD_MODE_IT_RISING_FALLING
-#define PWR_MODE_EVENT_RISING PWR_PVD_MODE_EVENT_RISING
-#define PWR_MODE_EVENT_FALLING PWR_PVD_MODE_EVENT_FALLING
-#define PWR_MODE_EVENT_RISING_FALLING PWR_PVD_MODE_EVENT_RISING_FALLING
-
-#define CR_OFFSET_BB PWR_CR_OFFSET_BB
-#define CSR_OFFSET_BB PWR_CSR_OFFSET_BB
-
-#define DBP_BitNumber DBP_BIT_NUMBER
-#define PVDE_BitNumber PVDE_BIT_NUMBER
-#define PMODE_BitNumber PMODE_BIT_NUMBER
-#define EWUP_BitNumber EWUP_BIT_NUMBER
-#define FPDS_BitNumber FPDS_BIT_NUMBER
-#define ODEN_BitNumber ODEN_BIT_NUMBER
-#define ODSWEN_BitNumber ODSWEN_BIT_NUMBER
-#define MRLVDS_BitNumber MRLVDS_BIT_NUMBER
-#define LPLVDS_BitNumber LPLVDS_BIT_NUMBER
-#define BRE_BitNumber BRE_BIT_NUMBER
-
-#define PWR_MODE_EVT PWR_PVD_MODE_NORMAL
-
- /**
- * @}
- */
-
-/** @defgroup HAL_SMBUS_Aliased_Functions HAL SMBUS Aliased Functions maintained for legacy purpose
- * @{
- */
-#define HAL_SMBUS_Slave_Listen_IT HAL_SMBUS_EnableListen_IT
-#define HAL_SMBUS_SlaveAddrCallback HAL_SMBUS_AddrCallback
-#define HAL_SMBUS_SlaveListenCpltCallback HAL_SMBUS_ListenCpltCallback
-/**
- * @}
- */
-
-/** @defgroup HAL_SPI_Aliased_Functions HAL SPI Aliased Functions maintained for legacy purpose
- * @{
- */
-#define HAL_SPI_FlushRxFifo HAL_SPIEx_FlushRxFifo
-/**
- * @}
- */
-
-/** @defgroup HAL_TIM_Aliased_Functions HAL TIM Aliased Functions maintained for legacy purpose
- * @{
- */
-#define HAL_TIM_DMADelayPulseCplt TIM_DMADelayPulseCplt
-#define HAL_TIM_DMAError TIM_DMAError
-#define HAL_TIM_DMACaptureCplt TIM_DMACaptureCplt
-#define HAL_TIMEx_DMACommutationCplt TIMEx_DMACommutationCplt
-/**
- * @}
- */
-
-/** @defgroup HAL_UART_Aliased_Functions HAL UART Aliased Functions maintained for legacy purpose
- * @{
- */
-#define HAL_UART_WakeupCallback HAL_UARTEx_WakeupCallback
-/**
- * @}
- */
-
-/** @defgroup HAL_LTDC_Aliased_Functions HAL LTDC Aliased Functions maintained for legacy purpose
- * @{
- */
-#define HAL_LTDC_LineEvenCallback HAL_LTDC_LineEventCallback
-/**
- * @}
- */
-
-
- /** @defgroup HAL_PPP_Aliased_Functions HAL PPP Aliased Functions maintained for legacy purpose
- * @{
- */
-
-/**
- * @}
- */
-
-/* Exported macros ------------------------------------------------------------*/
-
-/** @defgroup HAL_AES_Aliased_Macros HAL CRYP Aliased Macros maintained for legacy purpose
- * @{
- */
-#define AES_IT_CC CRYP_IT_CC
-#define AES_IT_ERR CRYP_IT_ERR
-#define AES_FLAG_CCF CRYP_FLAG_CCF
-/**
- * @}
- */
-
-/** @defgroup HAL_Aliased_Macros HAL Generic Aliased Macros maintained for legacy purpose
- * @{
- */
-#define __HAL_GET_BOOT_MODE __HAL_SYSCFG_GET_BOOT_MODE
-#define __HAL_REMAPMEMORY_FLASH __HAL_SYSCFG_REMAPMEMORY_FLASH
-#define __HAL_REMAPMEMORY_SYSTEMFLASH __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH
-#define __HAL_REMAPMEMORY_SRAM __HAL_SYSCFG_REMAPMEMORY_SRAM
-#define __HAL_REMAPMEMORY_FMC __HAL_SYSCFG_REMAPMEMORY_FMC
-#define __HAL_REMAPMEMORY_FMC_SDRAM __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM
-#define __HAL_REMAPMEMORY_FSMC __HAL_SYSCFG_REMAPMEMORY_FSMC
-#define __HAL_REMAPMEMORY_QUADSPI __HAL_SYSCFG_REMAPMEMORY_QUADSPI
-#define __HAL_FMC_BANK __HAL_SYSCFG_FMC_BANK
-#define __HAL_GET_FLAG __HAL_SYSCFG_GET_FLAG
-#define __HAL_CLEAR_FLAG __HAL_SYSCFG_CLEAR_FLAG
-#define __HAL_VREFINT_OUT_ENABLE __HAL_SYSCFG_VREFINT_OUT_ENABLE
-#define __HAL_VREFINT_OUT_DISABLE __HAL_SYSCFG_VREFINT_OUT_DISABLE
-
-#define SYSCFG_FLAG_VREF_READY SYSCFG_FLAG_VREFINT_READY
-#define SYSCFG_FLAG_RC48 RCC_FLAG_HSI48
-#define IS_SYSCFG_FASTMODEPLUS_CONFIG IS_I2C_FASTMODEPLUS
-#define UFB_MODE_BitNumber UFB_MODE_BIT_NUMBER
-#define CMP_PD_BitNumber CMP_PD_BIT_NUMBER
-
-/**
- * @}
- */
-
-
-/** @defgroup HAL_ADC_Aliased_Macros HAL ADC Aliased Macros maintained for legacy purpose
- * @{
- */
-#define __ADC_ENABLE __HAL_ADC_ENABLE
-#define __ADC_DISABLE __HAL_ADC_DISABLE
-#define __HAL_ADC_ENABLING_CONDITIONS ADC_ENABLING_CONDITIONS
-#define __HAL_ADC_DISABLING_CONDITIONS ADC_DISABLING_CONDITIONS
-#define __HAL_ADC_IS_ENABLED ADC_IS_ENABLE
-#define __ADC_IS_ENABLED ADC_IS_ENABLE
-#define __HAL_ADC_IS_SOFTWARE_START_REGULAR ADC_IS_SOFTWARE_START_REGULAR
-#define __HAL_ADC_IS_SOFTWARE_START_INJECTED ADC_IS_SOFTWARE_START_INJECTED
-#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED ADC_IS_CONVERSION_ONGOING_REGULAR_INJECTED
-#define __HAL_ADC_IS_CONVERSION_ONGOING_REGULAR ADC_IS_CONVERSION_ONGOING_REGULAR
-#define __HAL_ADC_IS_CONVERSION_ONGOING_INJECTED ADC_IS_CONVERSION_ONGOING_INJECTED
-#define __HAL_ADC_IS_CONVERSION_ONGOING ADC_IS_CONVERSION_ONGOING
-#define __HAL_ADC_CLEAR_ERRORCODE ADC_CLEAR_ERRORCODE
-
-#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION
-#define __HAL_ADC_JSQR_RK ADC_JSQR_RK
-#define __HAL_ADC_CFGR_AWD1CH ADC_CFGR_AWD1CH_SHIFT
-#define __HAL_ADC_CFGR_AWD23CR ADC_CFGR_AWD23CR
-#define __HAL_ADC_CFGR_INJECT_AUTO_CONVERSION ADC_CFGR_INJECT_AUTO_CONVERSION
-#define __HAL_ADC_CFGR_INJECT_CONTEXT_QUEUE ADC_CFGR_INJECT_CONTEXT_QUEUE
-#define __HAL_ADC_CFGR_INJECT_DISCCONTINUOUS ADC_CFGR_INJECT_DISCCONTINUOUS
-#define __HAL_ADC_CFGR_REG_DISCCONTINUOUS ADC_CFGR_REG_DISCCONTINUOUS
-#define __HAL_ADC_CFGR_DISCONTINUOUS_NUM ADC_CFGR_DISCONTINUOUS_NUM
-#define __HAL_ADC_CFGR_AUTOWAIT ADC_CFGR_AUTOWAIT
-#define __HAL_ADC_CFGR_CONTINUOUS ADC_CFGR_CONTINUOUS
-#define __HAL_ADC_CFGR_OVERRUN ADC_CFGR_OVERRUN
-#define __HAL_ADC_CFGR_DMACONTREQ ADC_CFGR_DMACONTREQ
-#define __HAL_ADC_CFGR_EXTSEL ADC_CFGR_EXTSEL_SET
-#define __HAL_ADC_JSQR_JEXTSEL ADC_JSQR_JEXTSEL_SET
-#define __HAL_ADC_OFR_CHANNEL ADC_OFR_CHANNEL
-#define __HAL_ADC_DIFSEL_CHANNEL ADC_DIFSEL_CHANNEL
-#define __HAL_ADC_CALFACT_DIFF_SET ADC_CALFACT_DIFF_SET
-#define __HAL_ADC_CALFACT_DIFF_GET ADC_CALFACT_DIFF_GET
-#define __HAL_ADC_TRX_HIGHTHRESHOLD ADC_TRX_HIGHTHRESHOLD
-
-#define __HAL_ADC_OFFSET_SHIFT_RESOLUTION ADC_OFFSET_SHIFT_RESOLUTION
-#define __HAL_ADC_AWD1THRESHOLD_SHIFT_RESOLUTION ADC_AWD1THRESHOLD_SHIFT_RESOLUTION
-#define __HAL_ADC_AWD23THRESHOLD_SHIFT_RESOLUTION ADC_AWD23THRESHOLD_SHIFT_RESOLUTION
-#define __HAL_ADC_COMMON_REGISTER ADC_COMMON_REGISTER
-#define __HAL_ADC_COMMON_CCR_MULTI ADC_COMMON_CCR_MULTI
-#define __HAL_ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE
-#define __ADC_MULTIMODE_IS_ENABLED ADC_MULTIMODE_IS_ENABLE
-#define __HAL_ADC_NONMULTIMODE_OR_MULTIMODEMASTER ADC_NONMULTIMODE_OR_MULTIMODEMASTER
-#define __HAL_ADC_COMMON_ADC_OTHER ADC_COMMON_ADC_OTHER
-#define __HAL_ADC_MULTI_SLAVE ADC_MULTI_SLAVE
-
-#define __HAL_ADC_SQR1_L ADC_SQR1_L_SHIFT
-#define __HAL_ADC_JSQR_JL ADC_JSQR_JL_SHIFT
-#define __HAL_ADC_JSQR_RK_JL ADC_JSQR_RK_JL
-#define __HAL_ADC_CR1_DISCONTINUOUS_NUM ADC_CR1_DISCONTINUOUS_NUM
-#define __HAL_ADC_CR1_SCAN ADC_CR1_SCAN_SET
-#define __HAL_ADC_CONVCYCLES_MAX_RANGE ADC_CONVCYCLES_MAX_RANGE
-#define __HAL_ADC_CLOCK_PRESCALER_RANGE ADC_CLOCK_PRESCALER_RANGE
-#define __HAL_ADC_GET_CLOCK_PRESCALER ADC_GET_CLOCK_PRESCALER
-
-#define __HAL_ADC_SQR1 ADC_SQR1
-#define __HAL_ADC_SMPR1 ADC_SMPR1
-#define __HAL_ADC_SMPR2 ADC_SMPR2
-#define __HAL_ADC_SQR3_RK ADC_SQR3_RK
-#define __HAL_ADC_SQR2_RK ADC_SQR2_RK
-#define __HAL_ADC_SQR1_RK ADC_SQR1_RK
-#define __HAL_ADC_CR2_CONTINUOUS ADC_CR2_CONTINUOUS
-#define __HAL_ADC_CR1_DISCONTINUOUS ADC_CR1_DISCONTINUOUS
-#define __HAL_ADC_CR1_SCANCONV ADC_CR1_SCANCONV
-#define __HAL_ADC_CR2_EOCSelection ADC_CR2_EOCSelection
-#define __HAL_ADC_CR2_DMAContReq ADC_CR2_DMAContReq
-#define __HAL_ADC_GET_RESOLUTION ADC_GET_RESOLUTION
-#define __HAL_ADC_JSQR ADC_JSQR
-
-#define __HAL_ADC_CHSELR_CHANNEL ADC_CHSELR_CHANNEL
-#define __HAL_ADC_CFGR1_REG_DISCCONTINUOUS ADC_CFGR1_REG_DISCCONTINUOUS
-#define __HAL_ADC_CFGR1_AUTOOFF ADC_CFGR1_AUTOOFF
-#define __HAL_ADC_CFGR1_AUTOWAIT ADC_CFGR1_AUTOWAIT
-#define __HAL_ADC_CFGR1_CONTINUOUS ADC_CFGR1_CONTINUOUS
-#define __HAL_ADC_CFGR1_OVERRUN ADC_CFGR1_OVERRUN
-#define __HAL_ADC_CFGR1_SCANDIR ADC_CFGR1_SCANDIR
-#define __HAL_ADC_CFGR1_DMACONTREQ ADC_CFGR1_DMACONTREQ
-
-/**
- * @}
- */
-
-/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
- * @{
- */
-#define __HAL_DHR12R1_ALIGNEMENT DAC_DHR12R1_ALIGNMENT
-#define __HAL_DHR12R2_ALIGNEMENT DAC_DHR12R2_ALIGNMENT
-#define __HAL_DHR12RD_ALIGNEMENT DAC_DHR12RD_ALIGNMENT
-#define IS_DAC_GENERATE_WAVE IS_DAC_WAVE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_DBGMCU_Aliased_Macros HAL DBGMCU Aliased Macros maintained for legacy purpose
- * @{
- */
-#define __HAL_FREEZE_TIM1_DBGMCU __HAL_DBGMCU_FREEZE_TIM1
-#define __HAL_UNFREEZE_TIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM1
-#define __HAL_FREEZE_TIM2_DBGMCU __HAL_DBGMCU_FREEZE_TIM2
-#define __HAL_UNFREEZE_TIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM2
-#define __HAL_FREEZE_TIM3_DBGMCU __HAL_DBGMCU_FREEZE_TIM3
-#define __HAL_UNFREEZE_TIM3_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM3
-#define __HAL_FREEZE_TIM4_DBGMCU __HAL_DBGMCU_FREEZE_TIM4
-#define __HAL_UNFREEZE_TIM4_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM4
-#define __HAL_FREEZE_TIM5_DBGMCU __HAL_DBGMCU_FREEZE_TIM5
-#define __HAL_UNFREEZE_TIM5_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM5
-#define __HAL_FREEZE_TIM6_DBGMCU __HAL_DBGMCU_FREEZE_TIM6
-#define __HAL_UNFREEZE_TIM6_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM6
-#define __HAL_FREEZE_TIM7_DBGMCU __HAL_DBGMCU_FREEZE_TIM7
-#define __HAL_UNFREEZE_TIM7_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM7
-#define __HAL_FREEZE_TIM8_DBGMCU __HAL_DBGMCU_FREEZE_TIM8
-#define __HAL_UNFREEZE_TIM8_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM8
-
-#define __HAL_FREEZE_TIM9_DBGMCU __HAL_DBGMCU_FREEZE_TIM9
-#define __HAL_UNFREEZE_TIM9_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM9
-#define __HAL_FREEZE_TIM10_DBGMCU __HAL_DBGMCU_FREEZE_TIM10
-#define __HAL_UNFREEZE_TIM10_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM10
-#define __HAL_FREEZE_TIM11_DBGMCU __HAL_DBGMCU_FREEZE_TIM11
-#define __HAL_UNFREEZE_TIM11_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM11
-#define __HAL_FREEZE_TIM12_DBGMCU __HAL_DBGMCU_FREEZE_TIM12
-#define __HAL_UNFREEZE_TIM12_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM12
-#define __HAL_FREEZE_TIM13_DBGMCU __HAL_DBGMCU_FREEZE_TIM13
-#define __HAL_UNFREEZE_TIM13_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM13
-#define __HAL_FREEZE_TIM14_DBGMCU __HAL_DBGMCU_FREEZE_TIM14
-#define __HAL_UNFREEZE_TIM14_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM14
-#define __HAL_FREEZE_CAN2_DBGMCU __HAL_DBGMCU_FREEZE_CAN2
-#define __HAL_UNFREEZE_CAN2_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN2
-
-
-#define __HAL_FREEZE_TIM15_DBGMCU __HAL_DBGMCU_FREEZE_TIM15
-#define __HAL_UNFREEZE_TIM15_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM15
-#define __HAL_FREEZE_TIM16_DBGMCU __HAL_DBGMCU_FREEZE_TIM16
-#define __HAL_UNFREEZE_TIM16_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM16
-#define __HAL_FREEZE_TIM17_DBGMCU __HAL_DBGMCU_FREEZE_TIM17
-#define __HAL_UNFREEZE_TIM17_DBGMCU __HAL_DBGMCU_UNFREEZE_TIM17
-#define __HAL_FREEZE_RTC_DBGMCU __HAL_DBGMCU_FREEZE_RTC
-#define __HAL_UNFREEZE_RTC_DBGMCU __HAL_DBGMCU_UNFREEZE_RTC
-#define __HAL_FREEZE_WWDG_DBGMCU __HAL_DBGMCU_FREEZE_WWDG
-#define __HAL_UNFREEZE_WWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_WWDG
-#define __HAL_FREEZE_IWDG_DBGMCU __HAL_DBGMCU_FREEZE_IWDG
-#define __HAL_UNFREEZE_IWDG_DBGMCU __HAL_DBGMCU_UNFREEZE_IWDG
-#define __HAL_FREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT
-#define __HAL_UNFREEZE_I2C1_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT
-#define __HAL_FREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT
-#define __HAL_UNFREEZE_I2C2_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT
-#define __HAL_FREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT
-#define __HAL_UNFREEZE_I2C3_TIMEOUT_DBGMCU __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT
-#define __HAL_FREEZE_CAN1_DBGMCU __HAL_DBGMCU_FREEZE_CAN1
-#define __HAL_UNFREEZE_CAN1_DBGMCU __HAL_DBGMCU_UNFREEZE_CAN1
-#define __HAL_FREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM1
-#define __HAL_UNFREEZE_LPTIM1_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM1
-#define __HAL_FREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_FREEZE_LPTIM2
-#define __HAL_UNFREEZE_LPTIM2_DBGMCU __HAL_DBGMCU_UNFREEZE_LPTIM2
-
-/**
- * @}
- */
-
-/** @defgroup HAL_COMP_Aliased_Macros HAL COMP Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define __HAL_COMP_EXTI_RISING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
- __HAL_COMP_COMP2_EXTI_ENABLE_RISING_EDGE())
-#define __HAL_COMP_EXTI_RISING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_RISING_EDGE() : \
- __HAL_COMP_COMP2_EXTI_DISABLE_RISING_EDGE())
-#define __HAL_COMP_EXTI_FALLING_IT_ENABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
- __HAL_COMP_COMP2_EXTI_ENABLE_FALLING_EDGE())
-#define __HAL_COMP_EXTI_FALLING_IT_DISABLE(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_FALLING_EDGE() : \
- __HAL_COMP_COMP2_EXTI_DISABLE_FALLING_EDGE())
-#define __HAL_COMP_EXTI_ENABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_ENABLE_IT() : \
- __HAL_COMP_COMP2_EXTI_ENABLE_IT())
-#define __HAL_COMP_EXTI_DISABLE_IT(__EXTILINE__) (((__EXTILINE__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_DISABLE_IT() : \
- __HAL_COMP_COMP2_EXTI_DISABLE_IT())
-#define __HAL_COMP_EXTI_GET_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_GET_FLAG() : \
- __HAL_COMP_COMP2_EXTI_GET_FLAG())
-#define __HAL_COMP_EXTI_CLEAR_FLAG(__FLAG__) (((__FLAG__) == COMP_EXTI_LINE_COMP1) ? __HAL_COMP_COMP1_EXTI_CLEAR_FLAG() : \
- __HAL_COMP_COMP2_EXTI_CLEAR_FLAG())
-#define __HAL_COMP_GET_EXTI_LINE COMP_GET_EXTI_LINE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_DAC_Aliased_Macros HAL DAC Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define IS_DAC_WAVE(WAVE) (((WAVE) == DAC_WAVE_NONE) || \
- ((WAVE) == DAC_WAVE_NOISE)|| \
- ((WAVE) == DAC_WAVE_TRIANGLE))
-
-/**
- * @}
- */
-
-/** @defgroup HAL_FLASH_Aliased_Macros HAL FLASH Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define IS_WRPAREA IS_OB_WRPAREA
-#define IS_TYPEPROGRAM IS_FLASH_TYPEPROGRAM
-#define IS_TYPEPROGRAMFLASH IS_FLASH_TYPEPROGRAM
-#define IS_TYPEERASE IS_FLASH_TYPEERASE
-#define IS_NBSECTORS IS_FLASH_NBSECTORS
-#define IS_OB_WDG_SOURCE IS_OB_IWDG_SOURCE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_I2C_Aliased_Macros HAL I2C Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define __HAL_I2C_RESET_CR2 I2C_RESET_CR2
-#define __HAL_I2C_GENERATE_START I2C_GENERATE_START
-#define __HAL_I2C_FREQ_RANGE I2C_FREQ_RANGE
-#define __HAL_I2C_RISE_TIME I2C_RISE_TIME
-#define __HAL_I2C_SPEED_STANDARD I2C_SPEED_STANDARD
-#define __HAL_I2C_SPEED_FAST I2C_SPEED_FAST
-#define __HAL_I2C_SPEED I2C_SPEED
-#define __HAL_I2C_7BIT_ADD_WRITE I2C_7BIT_ADD_WRITE
-#define __HAL_I2C_7BIT_ADD_READ I2C_7BIT_ADD_READ
-#define __HAL_I2C_10BIT_ADDRESS I2C_10BIT_ADDRESS
-#define __HAL_I2C_10BIT_HEADER_WRITE I2C_10BIT_HEADER_WRITE
-#define __HAL_I2C_10BIT_HEADER_READ I2C_10BIT_HEADER_READ
-#define __HAL_I2C_MEM_ADD_MSB I2C_MEM_ADD_MSB
-#define __HAL_I2C_MEM_ADD_LSB I2C_MEM_ADD_LSB
-#define __HAL_I2C_FREQRANGE I2C_FREQRANGE
-/**
- * @}
- */
-
-/** @defgroup HAL_I2S_Aliased_Macros HAL I2S Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define IS_I2S_INSTANCE IS_I2S_ALL_INSTANCE
-#define IS_I2S_INSTANCE_EXT IS_I2S_ALL_INSTANCE_EXT
-
-/**
- * @}
- */
-
-/** @defgroup HAL_IRDA_Aliased_Macros HAL IRDA Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define __IRDA_DISABLE __HAL_IRDA_DISABLE
-#define __IRDA_ENABLE __HAL_IRDA_ENABLE
-
-#define __HAL_IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE
-#define __HAL_IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION
-#define __IRDA_GETCLOCKSOURCE IRDA_GETCLOCKSOURCE
-#define __IRDA_MASK_COMPUTATION IRDA_MASK_COMPUTATION
-
-#define IS_IRDA_ONEBIT_SAMPLE IS_IRDA_ONE_BIT_SAMPLE
-
-
-/**
- * @}
- */
-
-
-/** @defgroup HAL_IWDG_Aliased_Macros HAL IWDG Aliased Macros maintained for legacy purpose
- * @{
- */
-#define __HAL_IWDG_ENABLE_WRITE_ACCESS IWDG_ENABLE_WRITE_ACCESS
-#define __HAL_IWDG_DISABLE_WRITE_ACCESS IWDG_DISABLE_WRITE_ACCESS
-/**
- * @}
- */
-
-
-/** @defgroup HAL_LPTIM_Aliased_Macros HAL LPTIM Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define __HAL_LPTIM_ENABLE_INTERRUPT __HAL_LPTIM_ENABLE_IT
-#define __HAL_LPTIM_DISABLE_INTERRUPT __HAL_LPTIM_DISABLE_IT
-#define __HAL_LPTIM_GET_ITSTATUS __HAL_LPTIM_GET_IT_SOURCE
-
-/**
- * @}
- */
-
-
-/** @defgroup HAL_OPAMP_Aliased_Macros HAL OPAMP Aliased Macros maintained for legacy purpose
- * @{
- */
-#define __OPAMP_CSR_OPAXPD OPAMP_CSR_OPAXPD
-#define __OPAMP_CSR_S3SELX OPAMP_CSR_S3SELX
-#define __OPAMP_CSR_S4SELX OPAMP_CSR_S4SELX
-#define __OPAMP_CSR_S5SELX OPAMP_CSR_S5SELX
-#define __OPAMP_CSR_S6SELX OPAMP_CSR_S6SELX
-#define __OPAMP_CSR_OPAXCAL_L OPAMP_CSR_OPAXCAL_L
-#define __OPAMP_CSR_OPAXCAL_H OPAMP_CSR_OPAXCAL_H
-#define __OPAMP_CSR_OPAXLPM OPAMP_CSR_OPAXLPM
-#define __OPAMP_CSR_ALL_SWITCHES OPAMP_CSR_ALL_SWITCHES
-#define __OPAMP_CSR_ANAWSELX OPAMP_CSR_ANAWSELX
-#define __OPAMP_CSR_OPAXCALOUT OPAMP_CSR_OPAXCALOUT
-#define __OPAMP_OFFSET_TRIM_BITSPOSITION OPAMP_OFFSET_TRIM_BITSPOSITION
-#define __OPAMP_OFFSET_TRIM_SET OPAMP_OFFSET_TRIM_SET
-
-/**
- * @}
- */
-
-
-/** @defgroup HAL_PWR_Aliased_Macros HAL PWR Aliased Macros maintained for legacy purpose
- * @{
- */
-#define __HAL_PVD_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT
-#define __HAL_PVD_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT
-#define __HAL_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
-#define __HAL_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
-#define __HAL_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
-#define __HAL_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
-#define __HAL_PVM_EVENT_DISABLE __HAL_PWR_PVM_EVENT_DISABLE
-#define __HAL_PVM_EVENT_ENABLE __HAL_PWR_PVM_EVENT_ENABLE
-#define __HAL_PVM_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_DISABLE
-#define __HAL_PVM_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_FALLINGTRIGGER_ENABLE
-#define __HAL_PVM_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_DISABLE
-#define __HAL_PVM_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVM_EXTI_RISINGTRIGGER_ENABLE
-#define __HAL_PWR_INTERNALWAKEUP_DISABLE HAL_PWREx_DisableInternalWakeUpLine
-#define __HAL_PWR_INTERNALWAKEUP_ENABLE HAL_PWREx_EnableInternalWakeUpLine
-#define __HAL_PWR_PULL_UP_DOWN_CONFIG_DISABLE HAL_PWREx_DisablePullUpPullDownConfig
-#define __HAL_PWR_PULL_UP_DOWN_CONFIG_ENABLE HAL_PWREx_EnablePullUpPullDownConfig
-#define __HAL_PWR_PVD_EXTI_CLEAR_EGDE_TRIGGER() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE()
-#define __HAL_PWR_PVD_EXTI_EVENT_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_EVENT
-#define __HAL_PWR_PVD_EXTI_EVENT_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_EVENT
-#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE
-#define __HAL_PWR_PVD_EXTI_FALLINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
-#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_DISABLE __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE
-#define __HAL_PWR_PVD_EXTI_RISINGTRIGGER_ENABLE __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
-#define __HAL_PWR_PVD_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE
-#define __HAL_PWR_PVD_EXTI_SET_RISING_EDGE_TRIGGER __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE
-#define __HAL_PWR_PVM_DISABLE() HAL_PWREx_DisablePVM1();HAL_PWREx_DisablePVM2();HAL_PWREx_DisablePVM3();HAL_PWREx_DisablePVM4()
-#define __HAL_PWR_PVM_ENABLE() HAL_PWREx_EnablePVM1();HAL_PWREx_EnablePVM2();HAL_PWREx_EnablePVM3();HAL_PWREx_EnablePVM4()
-#define __HAL_PWR_SRAM2CONTENT_PRESERVE_DISABLE HAL_PWREx_DisableSRAM2ContentRetention
-#define __HAL_PWR_SRAM2CONTENT_PRESERVE_ENABLE HAL_PWREx_EnableSRAM2ContentRetention
-#define __HAL_PWR_VDDIO2_DISABLE HAL_PWREx_DisableVddIO2
-#define __HAL_PWR_VDDIO2_ENABLE HAL_PWREx_EnableVddIO2
-#define __HAL_PWR_VDDIO2_EXTI_CLEAR_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_DISABLE_FALLING_EDGE
-#define __HAL_PWR_VDDIO2_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_PWR_VDDIO2_EXTI_ENABLE_FALLING_EDGE
-#define __HAL_PWR_VDDUSB_DISABLE HAL_PWREx_DisableVddUSB
-#define __HAL_PWR_VDDUSB_ENABLE HAL_PWREx_EnableVddUSB
-
-#if defined (STM32F4)
-#define __HAL_PVD_EXTI_ENABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_ENABLE_IT()
-#define __HAL_PVD_EXTI_DISABLE_IT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_DISABLE_IT()
-#define __HAL_PVD_EXTI_GET_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GET_FLAG()
-#define __HAL_PVD_EXTI_CLEAR_FLAG(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_CLEAR_FLAG()
-#define __HAL_PVD_EXTI_GENERATE_SWIT(PWR_EXTI_LINE_PVD) __HAL_PWR_PVD_EXTI_GENERATE_SWIT()
-#else
-#define __HAL_PVD_EXTI_CLEAR_FLAG __HAL_PWR_PVD_EXTI_CLEAR_FLAG
-#define __HAL_PVD_EXTI_DISABLE_IT __HAL_PWR_PVD_EXTI_DISABLE_IT
-#define __HAL_PVD_EXTI_ENABLE_IT __HAL_PWR_PVD_EXTI_ENABLE_IT
-#define __HAL_PVD_EXTI_GENERATE_SWIT __HAL_PWR_PVD_EXTI_GENERATE_SWIT
-#define __HAL_PVD_EXTI_GET_FLAG __HAL_PWR_PVD_EXTI_GET_FLAG
-#endif /* STM32F4 */
-/**
- * @}
- */
-
-
-/** @defgroup HAL_RCC_Aliased HAL RCC Aliased maintained for legacy purpose
- * @{
- */
-
-#define RCC_StopWakeUpClock_MSI RCC_STOP_WAKEUPCLOCK_MSI
-#define RCC_StopWakeUpClock_HSI RCC_STOP_WAKEUPCLOCK_HSI
-
-#define HAL_RCC_CCSCallback HAL_RCC_CSSCallback
-#define HAL_RC48_EnableBuffer_Cmd(cmd) (((cmd)==ENABLE) ? HAL_RCCEx_EnableHSI48_VREFINT() : HAL_RCCEx_DisableHSI48_VREFINT())
-
-#define __ADC_CLK_DISABLE __HAL_RCC_ADC_CLK_DISABLE
-#define __ADC_CLK_ENABLE __HAL_RCC_ADC_CLK_ENABLE
-#define __ADC_CLK_SLEEP_DISABLE __HAL_RCC_ADC_CLK_SLEEP_DISABLE
-#define __ADC_CLK_SLEEP_ENABLE __HAL_RCC_ADC_CLK_SLEEP_ENABLE
-#define __ADC_FORCE_RESET __HAL_RCC_ADC_FORCE_RESET
-#define __ADC_RELEASE_RESET __HAL_RCC_ADC_RELEASE_RESET
-#define __ADC1_CLK_DISABLE __HAL_RCC_ADC1_CLK_DISABLE
-#define __ADC1_CLK_ENABLE __HAL_RCC_ADC1_CLK_ENABLE
-#define __ADC1_FORCE_RESET __HAL_RCC_ADC1_FORCE_RESET
-#define __ADC1_RELEASE_RESET __HAL_RCC_ADC1_RELEASE_RESET
-#define __ADC1_CLK_SLEEP_ENABLE __HAL_RCC_ADC1_CLK_SLEEP_ENABLE
-#define __ADC1_CLK_SLEEP_DISABLE __HAL_RCC_ADC1_CLK_SLEEP_DISABLE
-#define __ADC2_CLK_DISABLE __HAL_RCC_ADC2_CLK_DISABLE
-#define __ADC2_CLK_ENABLE __HAL_RCC_ADC2_CLK_ENABLE
-#define __ADC2_FORCE_RESET __HAL_RCC_ADC2_FORCE_RESET
-#define __ADC2_RELEASE_RESET __HAL_RCC_ADC2_RELEASE_RESET
-#define __ADC3_CLK_DISABLE __HAL_RCC_ADC3_CLK_DISABLE
-#define __ADC3_CLK_ENABLE __HAL_RCC_ADC3_CLK_ENABLE
-#define __ADC3_FORCE_RESET __HAL_RCC_ADC3_FORCE_RESET
-#define __ADC3_RELEASE_RESET __HAL_RCC_ADC3_RELEASE_RESET
-#define __AES_CLK_DISABLE __HAL_RCC_AES_CLK_DISABLE
-#define __AES_CLK_ENABLE __HAL_RCC_AES_CLK_ENABLE
-#define __AES_CLK_SLEEP_DISABLE __HAL_RCC_AES_CLK_SLEEP_DISABLE
-#define __AES_CLK_SLEEP_ENABLE __HAL_RCC_AES_CLK_SLEEP_ENABLE
-#define __AES_FORCE_RESET __HAL_RCC_AES_FORCE_RESET
-#define __AES_RELEASE_RESET __HAL_RCC_AES_RELEASE_RESET
-#define __CRYP_CLK_SLEEP_ENABLE __HAL_RCC_CRYP_CLK_SLEEP_ENABLE
-#define __CRYP_CLK_SLEEP_DISABLE __HAL_RCC_CRYP_CLK_SLEEP_DISABLE
-#define __CRYP_CLK_ENABLE __HAL_RCC_CRYP_CLK_ENABLE
-#define __CRYP_CLK_DISABLE __HAL_RCC_CRYP_CLK_DISABLE
-#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET
-#define __CRYP_RELEASE_RESET __HAL_RCC_CRYP_RELEASE_RESET
-#define __AFIO_CLK_DISABLE __HAL_RCC_AFIO_CLK_DISABLE
-#define __AFIO_CLK_ENABLE __HAL_RCC_AFIO_CLK_ENABLE
-#define __AFIO_FORCE_RESET __HAL_RCC_AFIO_FORCE_RESET
-#define __AFIO_RELEASE_RESET __HAL_RCC_AFIO_RELEASE_RESET
-#define __AHB_FORCE_RESET __HAL_RCC_AHB_FORCE_RESET
-#define __AHB_RELEASE_RESET __HAL_RCC_AHB_RELEASE_RESET
-#define __AHB1_FORCE_RESET __HAL_RCC_AHB1_FORCE_RESET
-#define __AHB1_RELEASE_RESET __HAL_RCC_AHB1_RELEASE_RESET
-#define __AHB2_FORCE_RESET __HAL_RCC_AHB2_FORCE_RESET
-#define __AHB2_RELEASE_RESET __HAL_RCC_AHB2_RELEASE_RESET
-#define __AHB3_FORCE_RESET __HAL_RCC_AHB3_FORCE_RESET
-#define __AHB3_RELEASE_RESET __HAL_RCC_AHB3_RELEASE_RESET
-#define __APB1_FORCE_RESET __HAL_RCC_APB1_FORCE_RESET
-#define __APB1_RELEASE_RESET __HAL_RCC_APB1_RELEASE_RESET
-#define __APB2_FORCE_RESET __HAL_RCC_APB2_FORCE_RESET
-#define __APB2_RELEASE_RESET __HAL_RCC_APB2_RELEASE_RESET
-#define __BKP_CLK_DISABLE __HAL_RCC_BKP_CLK_DISABLE
-#define __BKP_CLK_ENABLE __HAL_RCC_BKP_CLK_ENABLE
-#define __BKP_FORCE_RESET __HAL_RCC_BKP_FORCE_RESET
-#define __BKP_RELEASE_RESET __HAL_RCC_BKP_RELEASE_RESET
-#define __CAN1_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
-#define __CAN1_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
-#define __CAN1_CLK_SLEEP_DISABLE __HAL_RCC_CAN1_CLK_SLEEP_DISABLE
-#define __CAN1_CLK_SLEEP_ENABLE __HAL_RCC_CAN1_CLK_SLEEP_ENABLE
-#define __CAN1_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
-#define __CAN1_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
-#define __CAN_CLK_DISABLE __HAL_RCC_CAN1_CLK_DISABLE
-#define __CAN_CLK_ENABLE __HAL_RCC_CAN1_CLK_ENABLE
-#define __CAN_FORCE_RESET __HAL_RCC_CAN1_FORCE_RESET
-#define __CAN_RELEASE_RESET __HAL_RCC_CAN1_RELEASE_RESET
-#define __CAN2_CLK_DISABLE __HAL_RCC_CAN2_CLK_DISABLE
-#define __CAN2_CLK_ENABLE __HAL_RCC_CAN2_CLK_ENABLE
-#define __CAN2_FORCE_RESET __HAL_RCC_CAN2_FORCE_RESET
-#define __CAN2_RELEASE_RESET __HAL_RCC_CAN2_RELEASE_RESET
-#define __CEC_CLK_DISABLE __HAL_RCC_CEC_CLK_DISABLE
-#define __CEC_CLK_ENABLE __HAL_RCC_CEC_CLK_ENABLE
-#define __COMP_CLK_DISABLE __HAL_RCC_COMP_CLK_DISABLE
-#define __COMP_CLK_ENABLE __HAL_RCC_COMP_CLK_ENABLE
-#define __COMP_FORCE_RESET __HAL_RCC_COMP_FORCE_RESET
-#define __COMP_RELEASE_RESET __HAL_RCC_COMP_RELEASE_RESET
-#define __COMP_CLK_SLEEP_ENABLE __HAL_RCC_COMP_CLK_SLEEP_ENABLE
-#define __COMP_CLK_SLEEP_DISABLE __HAL_RCC_COMP_CLK_SLEEP_DISABLE
-#define __CEC_FORCE_RESET __HAL_RCC_CEC_FORCE_RESET
-#define __CEC_RELEASE_RESET __HAL_RCC_CEC_RELEASE_RESET
-#define __CRC_CLK_DISABLE __HAL_RCC_CRC_CLK_DISABLE
-#define __CRC_CLK_ENABLE __HAL_RCC_CRC_CLK_ENABLE
-#define __CRC_CLK_SLEEP_DISABLE __HAL_RCC_CRC_CLK_SLEEP_DISABLE
-#define __CRC_CLK_SLEEP_ENABLE __HAL_RCC_CRC_CLK_SLEEP_ENABLE
-#define __CRC_FORCE_RESET __HAL_RCC_CRC_FORCE_RESET
-#define __CRC_RELEASE_RESET __HAL_RCC_CRC_RELEASE_RESET
-#define __DAC_CLK_DISABLE __HAL_RCC_DAC_CLK_DISABLE
-#define __DAC_CLK_ENABLE __HAL_RCC_DAC_CLK_ENABLE
-#define __DAC_FORCE_RESET __HAL_RCC_DAC_FORCE_RESET
-#define __DAC_RELEASE_RESET __HAL_RCC_DAC_RELEASE_RESET
-#define __DAC1_CLK_DISABLE __HAL_RCC_DAC1_CLK_DISABLE
-#define __DAC1_CLK_ENABLE __HAL_RCC_DAC1_CLK_ENABLE
-#define __DAC1_CLK_SLEEP_DISABLE __HAL_RCC_DAC1_CLK_SLEEP_DISABLE
-#define __DAC1_CLK_SLEEP_ENABLE __HAL_RCC_DAC1_CLK_SLEEP_ENABLE
-#define __DAC1_FORCE_RESET __HAL_RCC_DAC1_FORCE_RESET
-#define __DAC1_RELEASE_RESET __HAL_RCC_DAC1_RELEASE_RESET
-#define __DBGMCU_CLK_ENABLE __HAL_RCC_DBGMCU_CLK_ENABLE
-#define __DBGMCU_CLK_DISABLE __HAL_RCC_DBGMCU_CLK_DISABLE
-#define __DBGMCU_FORCE_RESET __HAL_RCC_DBGMCU_FORCE_RESET
-#define __DBGMCU_RELEASE_RESET __HAL_RCC_DBGMCU_RELEASE_RESET
-#define __DFSDM_CLK_DISABLE __HAL_RCC_DFSDM_CLK_DISABLE
-#define __DFSDM_CLK_ENABLE __HAL_RCC_DFSDM_CLK_ENABLE
-#define __DFSDM_CLK_SLEEP_DISABLE __HAL_RCC_DFSDM_CLK_SLEEP_DISABLE
-#define __DFSDM_CLK_SLEEP_ENABLE __HAL_RCC_DFSDM_CLK_SLEEP_ENABLE
-#define __DFSDM_FORCE_RESET __HAL_RCC_DFSDM_FORCE_RESET
-#define __DFSDM_RELEASE_RESET __HAL_RCC_DFSDM_RELEASE_RESET
-#define __DMA1_CLK_DISABLE __HAL_RCC_DMA1_CLK_DISABLE
-#define __DMA1_CLK_ENABLE __HAL_RCC_DMA1_CLK_ENABLE
-#define __DMA1_CLK_SLEEP_DISABLE __HAL_RCC_DMA1_CLK_SLEEP_DISABLE
-#define __DMA1_CLK_SLEEP_ENABLE __HAL_RCC_DMA1_CLK_SLEEP_ENABLE
-#define __DMA1_FORCE_RESET __HAL_RCC_DMA1_FORCE_RESET
-#define __DMA1_RELEASE_RESET __HAL_RCC_DMA1_RELEASE_RESET
-#define __DMA2_CLK_DISABLE __HAL_RCC_DMA2_CLK_DISABLE
-#define __DMA2_CLK_ENABLE __HAL_RCC_DMA2_CLK_ENABLE
-#define __DMA2_CLK_SLEEP_DISABLE __HAL_RCC_DMA2_CLK_SLEEP_DISABLE
-#define __DMA2_CLK_SLEEP_ENABLE __HAL_RCC_DMA2_CLK_SLEEP_ENABLE
-#define __DMA2_FORCE_RESET __HAL_RCC_DMA2_FORCE_RESET
-#define __DMA2_RELEASE_RESET __HAL_RCC_DMA2_RELEASE_RESET
-#define __ETHMAC_CLK_DISABLE __HAL_RCC_ETHMAC_CLK_DISABLE
-#define __ETHMAC_CLK_ENABLE __HAL_RCC_ETHMAC_CLK_ENABLE
-#define __ETHMAC_FORCE_RESET __HAL_RCC_ETHMAC_FORCE_RESET
-#define __ETHMAC_RELEASE_RESET __HAL_RCC_ETHMAC_RELEASE_RESET
-#define __ETHMACRX_CLK_DISABLE __HAL_RCC_ETHMACRX_CLK_DISABLE
-#define __ETHMACRX_CLK_ENABLE __HAL_RCC_ETHMACRX_CLK_ENABLE
-#define __ETHMACTX_CLK_DISABLE __HAL_RCC_ETHMACTX_CLK_DISABLE
-#define __ETHMACTX_CLK_ENABLE __HAL_RCC_ETHMACTX_CLK_ENABLE
-#define __FIREWALL_CLK_DISABLE __HAL_RCC_FIREWALL_CLK_DISABLE
-#define __FIREWALL_CLK_ENABLE __HAL_RCC_FIREWALL_CLK_ENABLE
-#define __FLASH_CLK_DISABLE __HAL_RCC_FLASH_CLK_DISABLE
-#define __FLASH_CLK_ENABLE __HAL_RCC_FLASH_CLK_ENABLE
-#define __FLASH_CLK_SLEEP_DISABLE __HAL_RCC_FLASH_CLK_SLEEP_DISABLE
-#define __FLASH_CLK_SLEEP_ENABLE __HAL_RCC_FLASH_CLK_SLEEP_ENABLE
-#define __FLASH_FORCE_RESET __HAL_RCC_FLASH_FORCE_RESET
-#define __FLASH_RELEASE_RESET __HAL_RCC_FLASH_RELEASE_RESET
-#define __FLITF_CLK_DISABLE __HAL_RCC_FLITF_CLK_DISABLE
-#define __FLITF_CLK_ENABLE __HAL_RCC_FLITF_CLK_ENABLE
-#define __FLITF_FORCE_RESET __HAL_RCC_FLITF_FORCE_RESET
-#define __FLITF_RELEASE_RESET __HAL_RCC_FLITF_RELEASE_RESET
-#define __FLITF_CLK_SLEEP_ENABLE __HAL_RCC_FLITF_CLK_SLEEP_ENABLE
-#define __FLITF_CLK_SLEEP_DISABLE __HAL_RCC_FLITF_CLK_SLEEP_DISABLE
-#define __FMC_CLK_DISABLE __HAL_RCC_FMC_CLK_DISABLE
-#define __FMC_CLK_ENABLE __HAL_RCC_FMC_CLK_ENABLE
-#define __FMC_CLK_SLEEP_DISABLE __HAL_RCC_FMC_CLK_SLEEP_DISABLE
-#define __FMC_CLK_SLEEP_ENABLE __HAL_RCC_FMC_CLK_SLEEP_ENABLE
-#define __FMC_FORCE_RESET __HAL_RCC_FMC_FORCE_RESET
-#define __FMC_RELEASE_RESET __HAL_RCC_FMC_RELEASE_RESET
-#define __FSMC_CLK_DISABLE __HAL_RCC_FSMC_CLK_DISABLE
-#define __FSMC_CLK_ENABLE __HAL_RCC_FSMC_CLK_ENABLE
-#define __GPIOA_CLK_DISABLE __HAL_RCC_GPIOA_CLK_DISABLE
-#define __GPIOA_CLK_ENABLE __HAL_RCC_GPIOA_CLK_ENABLE
-#define __GPIOA_CLK_SLEEP_DISABLE __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE
-#define __GPIOA_CLK_SLEEP_ENABLE __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE
-#define __GPIOA_FORCE_RESET __HAL_RCC_GPIOA_FORCE_RESET
-#define __GPIOA_RELEASE_RESET __HAL_RCC_GPIOA_RELEASE_RESET
-#define __GPIOB_CLK_DISABLE __HAL_RCC_GPIOB_CLK_DISABLE
-#define __GPIOB_CLK_ENABLE __HAL_RCC_GPIOB_CLK_ENABLE
-#define __GPIOB_CLK_SLEEP_DISABLE __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE
-#define __GPIOB_CLK_SLEEP_ENABLE __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE
-#define __GPIOB_FORCE_RESET __HAL_RCC_GPIOB_FORCE_RESET
-#define __GPIOB_RELEASE_RESET __HAL_RCC_GPIOB_RELEASE_RESET
-#define __GPIOC_CLK_DISABLE __HAL_RCC_GPIOC_CLK_DISABLE
-#define __GPIOC_CLK_ENABLE __HAL_RCC_GPIOC_CLK_ENABLE
-#define __GPIOC_CLK_SLEEP_DISABLE __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE
-#define __GPIOC_CLK_SLEEP_ENABLE __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE
-#define __GPIOC_FORCE_RESET __HAL_RCC_GPIOC_FORCE_RESET
-#define __GPIOC_RELEASE_RESET __HAL_RCC_GPIOC_RELEASE_RESET
-#define __GPIOD_CLK_DISABLE __HAL_RCC_GPIOD_CLK_DISABLE
-#define __GPIOD_CLK_ENABLE __HAL_RCC_GPIOD_CLK_ENABLE
-#define __GPIOD_CLK_SLEEP_DISABLE __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE
-#define __GPIOD_CLK_SLEEP_ENABLE __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE
-#define __GPIOD_FORCE_RESET __HAL_RCC_GPIOD_FORCE_RESET
-#define __GPIOD_RELEASE_RESET __HAL_RCC_GPIOD_RELEASE_RESET
-#define __GPIOE_CLK_DISABLE __HAL_RCC_GPIOE_CLK_DISABLE
-#define __GPIOE_CLK_ENABLE __HAL_RCC_GPIOE_CLK_ENABLE
-#define __GPIOE_CLK_SLEEP_DISABLE __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE
-#define __GPIOE_CLK_SLEEP_ENABLE __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE
-#define __GPIOE_FORCE_RESET __HAL_RCC_GPIOE_FORCE_RESET
-#define __GPIOE_RELEASE_RESET __HAL_RCC_GPIOE_RELEASE_RESET
-#define __GPIOF_CLK_DISABLE __HAL_RCC_GPIOF_CLK_DISABLE
-#define __GPIOF_CLK_ENABLE __HAL_RCC_GPIOF_CLK_ENABLE
-#define __GPIOF_CLK_SLEEP_DISABLE __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE
-#define __GPIOF_CLK_SLEEP_ENABLE __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE
-#define __GPIOF_FORCE_RESET __HAL_RCC_GPIOF_FORCE_RESET
-#define __GPIOF_RELEASE_RESET __HAL_RCC_GPIOF_RELEASE_RESET
-#define __GPIOG_CLK_DISABLE __HAL_RCC_GPIOG_CLK_DISABLE
-#define __GPIOG_CLK_ENABLE __HAL_RCC_GPIOG_CLK_ENABLE
-#define __GPIOG_CLK_SLEEP_DISABLE __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE
-#define __GPIOG_CLK_SLEEP_ENABLE __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE
-#define __GPIOG_FORCE_RESET __HAL_RCC_GPIOG_FORCE_RESET
-#define __GPIOG_RELEASE_RESET __HAL_RCC_GPIOG_RELEASE_RESET
-#define __GPIOH_CLK_DISABLE __HAL_RCC_GPIOH_CLK_DISABLE
-#define __GPIOH_CLK_ENABLE __HAL_RCC_GPIOH_CLK_ENABLE
-#define __GPIOH_CLK_SLEEP_DISABLE __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE
-#define __GPIOH_CLK_SLEEP_ENABLE __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE
-#define __GPIOH_FORCE_RESET __HAL_RCC_GPIOH_FORCE_RESET
-#define __GPIOH_RELEASE_RESET __HAL_RCC_GPIOH_RELEASE_RESET
-#define __I2C1_CLK_DISABLE __HAL_RCC_I2C1_CLK_DISABLE
-#define __I2C1_CLK_ENABLE __HAL_RCC_I2C1_CLK_ENABLE
-#define __I2C1_CLK_SLEEP_DISABLE __HAL_RCC_I2C1_CLK_SLEEP_DISABLE
-#define __I2C1_CLK_SLEEP_ENABLE __HAL_RCC_I2C1_CLK_SLEEP_ENABLE
-#define __I2C1_FORCE_RESET __HAL_RCC_I2C1_FORCE_RESET
-#define __I2C1_RELEASE_RESET __HAL_RCC_I2C1_RELEASE_RESET
-#define __I2C2_CLK_DISABLE __HAL_RCC_I2C2_CLK_DISABLE
-#define __I2C2_CLK_ENABLE __HAL_RCC_I2C2_CLK_ENABLE
-#define __I2C2_CLK_SLEEP_DISABLE __HAL_RCC_I2C2_CLK_SLEEP_DISABLE
-#define __I2C2_CLK_SLEEP_ENABLE __HAL_RCC_I2C2_CLK_SLEEP_ENABLE
-#define __I2C2_FORCE_RESET __HAL_RCC_I2C2_FORCE_RESET
-#define __I2C2_RELEASE_RESET __HAL_RCC_I2C2_RELEASE_RESET
-#define __I2C3_CLK_DISABLE __HAL_RCC_I2C3_CLK_DISABLE
-#define __I2C3_CLK_ENABLE __HAL_RCC_I2C3_CLK_ENABLE
-#define __I2C3_CLK_SLEEP_DISABLE __HAL_RCC_I2C3_CLK_SLEEP_DISABLE
-#define __I2C3_CLK_SLEEP_ENABLE __HAL_RCC_I2C3_CLK_SLEEP_ENABLE
-#define __I2C3_FORCE_RESET __HAL_RCC_I2C3_FORCE_RESET
-#define __I2C3_RELEASE_RESET __HAL_RCC_I2C3_RELEASE_RESET
-#define __LCD_CLK_DISABLE __HAL_RCC_LCD_CLK_DISABLE
-#define __LCD_CLK_ENABLE __HAL_RCC_LCD_CLK_ENABLE
-#define __LCD_CLK_SLEEP_DISABLE __HAL_RCC_LCD_CLK_SLEEP_DISABLE
-#define __LCD_CLK_SLEEP_ENABLE __HAL_RCC_LCD_CLK_SLEEP_ENABLE
-#define __LCD_FORCE_RESET __HAL_RCC_LCD_FORCE_RESET
-#define __LCD_RELEASE_RESET __HAL_RCC_LCD_RELEASE_RESET
-#define __LPTIM1_CLK_DISABLE __HAL_RCC_LPTIM1_CLK_DISABLE
-#define __LPTIM1_CLK_ENABLE __HAL_RCC_LPTIM1_CLK_ENABLE
-#define __LPTIM1_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM1_CLK_SLEEP_DISABLE
-#define __LPTIM1_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM1_CLK_SLEEP_ENABLE
-#define __LPTIM1_FORCE_RESET __HAL_RCC_LPTIM1_FORCE_RESET
-#define __LPTIM1_RELEASE_RESET __HAL_RCC_LPTIM1_RELEASE_RESET
-#define __LPTIM2_CLK_DISABLE __HAL_RCC_LPTIM2_CLK_DISABLE
-#define __LPTIM2_CLK_ENABLE __HAL_RCC_LPTIM2_CLK_ENABLE
-#define __LPTIM2_CLK_SLEEP_DISABLE __HAL_RCC_LPTIM2_CLK_SLEEP_DISABLE
-#define __LPTIM2_CLK_SLEEP_ENABLE __HAL_RCC_LPTIM2_CLK_SLEEP_ENABLE
-#define __LPTIM2_FORCE_RESET __HAL_RCC_LPTIM2_FORCE_RESET
-#define __LPTIM2_RELEASE_RESET __HAL_RCC_LPTIM2_RELEASE_RESET
-#define __LPUART1_CLK_DISABLE __HAL_RCC_LPUART1_CLK_DISABLE
-#define __LPUART1_CLK_ENABLE __HAL_RCC_LPUART1_CLK_ENABLE
-#define __LPUART1_CLK_SLEEP_DISABLE __HAL_RCC_LPUART1_CLK_SLEEP_DISABLE
-#define __LPUART1_CLK_SLEEP_ENABLE __HAL_RCC_LPUART1_CLK_SLEEP_ENABLE
-#define __LPUART1_FORCE_RESET __HAL_RCC_LPUART1_FORCE_RESET
-#define __LPUART1_RELEASE_RESET __HAL_RCC_LPUART1_RELEASE_RESET
-#define __OPAMP_CLK_DISABLE __HAL_RCC_OPAMP_CLK_DISABLE
-#define __OPAMP_CLK_ENABLE __HAL_RCC_OPAMP_CLK_ENABLE
-#define __OPAMP_CLK_SLEEP_DISABLE __HAL_RCC_OPAMP_CLK_SLEEP_DISABLE
-#define __OPAMP_CLK_SLEEP_ENABLE __HAL_RCC_OPAMP_CLK_SLEEP_ENABLE
-#define __OPAMP_FORCE_RESET __HAL_RCC_OPAMP_FORCE_RESET
-#define __OPAMP_RELEASE_RESET __HAL_RCC_OPAMP_RELEASE_RESET
-#define __OTGFS_CLK_DISABLE __HAL_RCC_OTGFS_CLK_DISABLE
-#define __OTGFS_CLK_ENABLE __HAL_RCC_OTGFS_CLK_ENABLE
-#define __OTGFS_CLK_SLEEP_DISABLE __HAL_RCC_OTGFS_CLK_SLEEP_DISABLE
-#define __OTGFS_CLK_SLEEP_ENABLE __HAL_RCC_OTGFS_CLK_SLEEP_ENABLE
-#define __OTGFS_FORCE_RESET __HAL_RCC_OTGFS_FORCE_RESET
-#define __OTGFS_RELEASE_RESET __HAL_RCC_OTGFS_RELEASE_RESET
-#define __PWR_CLK_DISABLE __HAL_RCC_PWR_CLK_DISABLE
-#define __PWR_CLK_ENABLE __HAL_RCC_PWR_CLK_ENABLE
-#define __PWR_CLK_SLEEP_DISABLE __HAL_RCC_PWR_CLK_SLEEP_DISABLE
-#define __PWR_CLK_SLEEP_ENABLE __HAL_RCC_PWR_CLK_SLEEP_ENABLE
-#define __PWR_FORCE_RESET __HAL_RCC_PWR_FORCE_RESET
-#define __PWR_RELEASE_RESET __HAL_RCC_PWR_RELEASE_RESET
-#define __QSPI_CLK_DISABLE __HAL_RCC_QSPI_CLK_DISABLE
-#define __QSPI_CLK_ENABLE __HAL_RCC_QSPI_CLK_ENABLE
-#define __QSPI_CLK_SLEEP_DISABLE __HAL_RCC_QSPI_CLK_SLEEP_DISABLE
-#define __QSPI_CLK_SLEEP_ENABLE __HAL_RCC_QSPI_CLK_SLEEP_ENABLE
-#define __QSPI_FORCE_RESET __HAL_RCC_QSPI_FORCE_RESET
-#define __QSPI_RELEASE_RESET __HAL_RCC_QSPI_RELEASE_RESET
-#define __RNG_CLK_DISABLE __HAL_RCC_RNG_CLK_DISABLE
-#define __RNG_CLK_ENABLE __HAL_RCC_RNG_CLK_ENABLE
-#define __RNG_CLK_SLEEP_DISABLE __HAL_RCC_RNG_CLK_SLEEP_DISABLE
-#define __RNG_CLK_SLEEP_ENABLE __HAL_RCC_RNG_CLK_SLEEP_ENABLE
-#define __RNG_FORCE_RESET __HAL_RCC_RNG_FORCE_RESET
-#define __RNG_RELEASE_RESET __HAL_RCC_RNG_RELEASE_RESET
-#define __SAI1_CLK_DISABLE __HAL_RCC_SAI1_CLK_DISABLE
-#define __SAI1_CLK_ENABLE __HAL_RCC_SAI1_CLK_ENABLE
-#define __SAI1_CLK_SLEEP_DISABLE __HAL_RCC_SAI1_CLK_SLEEP_DISABLE
-#define __SAI1_CLK_SLEEP_ENABLE __HAL_RCC_SAI1_CLK_SLEEP_ENABLE
-#define __SAI1_FORCE_RESET __HAL_RCC_SAI1_FORCE_RESET
-#define __SAI1_RELEASE_RESET __HAL_RCC_SAI1_RELEASE_RESET
-#define __SAI2_CLK_DISABLE __HAL_RCC_SAI2_CLK_DISABLE
-#define __SAI2_CLK_ENABLE __HAL_RCC_SAI2_CLK_ENABLE
-#define __SAI2_CLK_SLEEP_DISABLE __HAL_RCC_SAI2_CLK_SLEEP_DISABLE
-#define __SAI2_CLK_SLEEP_ENABLE __HAL_RCC_SAI2_CLK_SLEEP_ENABLE
-#define __SAI2_FORCE_RESET __HAL_RCC_SAI2_FORCE_RESET
-#define __SAI2_RELEASE_RESET __HAL_RCC_SAI2_RELEASE_RESET
-#define __SDIO_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
-#define __SDIO_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
-#define __SDMMC_CLK_DISABLE __HAL_RCC_SDMMC_CLK_DISABLE
-#define __SDMMC_CLK_ENABLE __HAL_RCC_SDMMC_CLK_ENABLE
-#define __SDMMC_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC_CLK_SLEEP_DISABLE
-#define __SDMMC_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC_CLK_SLEEP_ENABLE
-#define __SDMMC_FORCE_RESET __HAL_RCC_SDMMC_FORCE_RESET
-#define __SDMMC_RELEASE_RESET __HAL_RCC_SDMMC_RELEASE_RESET
-#define __SPI1_CLK_DISABLE __HAL_RCC_SPI1_CLK_DISABLE
-#define __SPI1_CLK_ENABLE __HAL_RCC_SPI1_CLK_ENABLE
-#define __SPI1_CLK_SLEEP_DISABLE __HAL_RCC_SPI1_CLK_SLEEP_DISABLE
-#define __SPI1_CLK_SLEEP_ENABLE __HAL_RCC_SPI1_CLK_SLEEP_ENABLE
-#define __SPI1_FORCE_RESET __HAL_RCC_SPI1_FORCE_RESET
-#define __SPI1_RELEASE_RESET __HAL_RCC_SPI1_RELEASE_RESET
-#define __SPI2_CLK_DISABLE __HAL_RCC_SPI2_CLK_DISABLE
-#define __SPI2_CLK_ENABLE __HAL_RCC_SPI2_CLK_ENABLE
-#define __SPI2_CLK_SLEEP_DISABLE __HAL_RCC_SPI2_CLK_SLEEP_DISABLE
-#define __SPI2_CLK_SLEEP_ENABLE __HAL_RCC_SPI2_CLK_SLEEP_ENABLE
-#define __SPI2_FORCE_RESET __HAL_RCC_SPI2_FORCE_RESET
-#define __SPI2_RELEASE_RESET __HAL_RCC_SPI2_RELEASE_RESET
-#define __SPI3_CLK_DISABLE __HAL_RCC_SPI3_CLK_DISABLE
-#define __SPI3_CLK_ENABLE __HAL_RCC_SPI3_CLK_ENABLE
-#define __SPI3_CLK_SLEEP_DISABLE __HAL_RCC_SPI3_CLK_SLEEP_DISABLE
-#define __SPI3_CLK_SLEEP_ENABLE __HAL_RCC_SPI3_CLK_SLEEP_ENABLE
-#define __SPI3_FORCE_RESET __HAL_RCC_SPI3_FORCE_RESET
-#define __SPI3_RELEASE_RESET __HAL_RCC_SPI3_RELEASE_RESET
-#define __SRAM_CLK_DISABLE __HAL_RCC_SRAM_CLK_DISABLE
-#define __SRAM_CLK_ENABLE __HAL_RCC_SRAM_CLK_ENABLE
-#define __SRAM1_CLK_SLEEP_DISABLE __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE
-#define __SRAM1_CLK_SLEEP_ENABLE __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE
-#define __SRAM2_CLK_SLEEP_DISABLE __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE
-#define __SRAM2_CLK_SLEEP_ENABLE __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE
-#define __SWPMI1_CLK_DISABLE __HAL_RCC_SWPMI1_CLK_DISABLE
-#define __SWPMI1_CLK_ENABLE __HAL_RCC_SWPMI1_CLK_ENABLE
-#define __SWPMI1_CLK_SLEEP_DISABLE __HAL_RCC_SWPMI1_CLK_SLEEP_DISABLE
-#define __SWPMI1_CLK_SLEEP_ENABLE __HAL_RCC_SWPMI1_CLK_SLEEP_ENABLE
-#define __SWPMI1_FORCE_RESET __HAL_RCC_SWPMI1_FORCE_RESET
-#define __SWPMI1_RELEASE_RESET __HAL_RCC_SWPMI1_RELEASE_RESET
-#define __SYSCFG_CLK_DISABLE __HAL_RCC_SYSCFG_CLK_DISABLE
-#define __SYSCFG_CLK_ENABLE __HAL_RCC_SYSCFG_CLK_ENABLE
-#define __SYSCFG_CLK_SLEEP_DISABLE __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE
-#define __SYSCFG_CLK_SLEEP_ENABLE __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE
-#define __SYSCFG_FORCE_RESET __HAL_RCC_SYSCFG_FORCE_RESET
-#define __SYSCFG_RELEASE_RESET __HAL_RCC_SYSCFG_RELEASE_RESET
-#define __TIM1_CLK_DISABLE __HAL_RCC_TIM1_CLK_DISABLE
-#define __TIM1_CLK_ENABLE __HAL_RCC_TIM1_CLK_ENABLE
-#define __TIM1_CLK_SLEEP_DISABLE __HAL_RCC_TIM1_CLK_SLEEP_DISABLE
-#define __TIM1_CLK_SLEEP_ENABLE __HAL_RCC_TIM1_CLK_SLEEP_ENABLE
-#define __TIM1_FORCE_RESET __HAL_RCC_TIM1_FORCE_RESET
-#define __TIM1_RELEASE_RESET __HAL_RCC_TIM1_RELEASE_RESET
-#define __TIM10_CLK_DISABLE __HAL_RCC_TIM10_CLK_DISABLE
-#define __TIM10_CLK_ENABLE __HAL_RCC_TIM10_CLK_ENABLE
-#define __TIM10_FORCE_RESET __HAL_RCC_TIM10_FORCE_RESET
-#define __TIM10_RELEASE_RESET __HAL_RCC_TIM10_RELEASE_RESET
-#define __TIM11_CLK_DISABLE __HAL_RCC_TIM11_CLK_DISABLE
-#define __TIM11_CLK_ENABLE __HAL_RCC_TIM11_CLK_ENABLE
-#define __TIM11_FORCE_RESET __HAL_RCC_TIM11_FORCE_RESET
-#define __TIM11_RELEASE_RESET __HAL_RCC_TIM11_RELEASE_RESET
-#define __TIM12_CLK_DISABLE __HAL_RCC_TIM12_CLK_DISABLE
-#define __TIM12_CLK_ENABLE __HAL_RCC_TIM12_CLK_ENABLE
-#define __TIM12_FORCE_RESET __HAL_RCC_TIM12_FORCE_RESET
-#define __TIM12_RELEASE_RESET __HAL_RCC_TIM12_RELEASE_RESET
-#define __TIM13_CLK_DISABLE __HAL_RCC_TIM13_CLK_DISABLE
-#define __TIM13_CLK_ENABLE __HAL_RCC_TIM13_CLK_ENABLE
-#define __TIM13_FORCE_RESET __HAL_RCC_TIM13_FORCE_RESET
-#define __TIM13_RELEASE_RESET __HAL_RCC_TIM13_RELEASE_RESET
-#define __TIM14_CLK_DISABLE __HAL_RCC_TIM14_CLK_DISABLE
-#define __TIM14_CLK_ENABLE __HAL_RCC_TIM14_CLK_ENABLE
-#define __TIM14_FORCE_RESET __HAL_RCC_TIM14_FORCE_RESET
-#define __TIM14_RELEASE_RESET __HAL_RCC_TIM14_RELEASE_RESET
-#define __TIM15_CLK_DISABLE __HAL_RCC_TIM15_CLK_DISABLE
-#define __TIM15_CLK_ENABLE __HAL_RCC_TIM15_CLK_ENABLE
-#define __TIM15_CLK_SLEEP_DISABLE __HAL_RCC_TIM15_CLK_SLEEP_DISABLE
-#define __TIM15_CLK_SLEEP_ENABLE __HAL_RCC_TIM15_CLK_SLEEP_ENABLE
-#define __TIM15_FORCE_RESET __HAL_RCC_TIM15_FORCE_RESET
-#define __TIM15_RELEASE_RESET __HAL_RCC_TIM15_RELEASE_RESET
-#define __TIM16_CLK_DISABLE __HAL_RCC_TIM16_CLK_DISABLE
-#define __TIM16_CLK_ENABLE __HAL_RCC_TIM16_CLK_ENABLE
-#define __TIM16_CLK_SLEEP_DISABLE __HAL_RCC_TIM16_CLK_SLEEP_DISABLE
-#define __TIM16_CLK_SLEEP_ENABLE __HAL_RCC_TIM16_CLK_SLEEP_ENABLE
-#define __TIM16_FORCE_RESET __HAL_RCC_TIM16_FORCE_RESET
-#define __TIM16_RELEASE_RESET __HAL_RCC_TIM16_RELEASE_RESET
-#define __TIM17_CLK_DISABLE __HAL_RCC_TIM17_CLK_DISABLE
-#define __TIM17_CLK_ENABLE __HAL_RCC_TIM17_CLK_ENABLE
-#define __TIM17_CLK_SLEEP_DISABLE __HAL_RCC_TIM17_CLK_SLEEP_DISABLE
-#define __TIM17_CLK_SLEEP_ENABLE __HAL_RCC_TIM17_CLK_SLEEP_ENABLE
-#define __TIM17_FORCE_RESET __HAL_RCC_TIM17_FORCE_RESET
-#define __TIM17_RELEASE_RESET __HAL_RCC_TIM17_RELEASE_RESET
-#define __TIM2_CLK_DISABLE __HAL_RCC_TIM2_CLK_DISABLE
-#define __TIM2_CLK_ENABLE __HAL_RCC_TIM2_CLK_ENABLE
-#define __TIM2_CLK_SLEEP_DISABLE __HAL_RCC_TIM2_CLK_SLEEP_DISABLE
-#define __TIM2_CLK_SLEEP_ENABLE __HAL_RCC_TIM2_CLK_SLEEP_ENABLE
-#define __TIM2_FORCE_RESET __HAL_RCC_TIM2_FORCE_RESET
-#define __TIM2_RELEASE_RESET __HAL_RCC_TIM2_RELEASE_RESET
-#define __TIM3_CLK_DISABLE __HAL_RCC_TIM3_CLK_DISABLE
-#define __TIM3_CLK_ENABLE __HAL_RCC_TIM3_CLK_ENABLE
-#define __TIM3_CLK_SLEEP_DISABLE __HAL_RCC_TIM3_CLK_SLEEP_DISABLE
-#define __TIM3_CLK_SLEEP_ENABLE __HAL_RCC_TIM3_CLK_SLEEP_ENABLE
-#define __TIM3_FORCE_RESET __HAL_RCC_TIM3_FORCE_RESET
-#define __TIM3_RELEASE_RESET __HAL_RCC_TIM3_RELEASE_RESET
-#define __TIM4_CLK_DISABLE __HAL_RCC_TIM4_CLK_DISABLE
-#define __TIM4_CLK_ENABLE __HAL_RCC_TIM4_CLK_ENABLE
-#define __TIM4_CLK_SLEEP_DISABLE __HAL_RCC_TIM4_CLK_SLEEP_DISABLE
-#define __TIM4_CLK_SLEEP_ENABLE __HAL_RCC_TIM4_CLK_SLEEP_ENABLE
-#define __TIM4_FORCE_RESET __HAL_RCC_TIM4_FORCE_RESET
-#define __TIM4_RELEASE_RESET __HAL_RCC_TIM4_RELEASE_RESET
-#define __TIM5_CLK_DISABLE __HAL_RCC_TIM5_CLK_DISABLE
-#define __TIM5_CLK_ENABLE __HAL_RCC_TIM5_CLK_ENABLE
-#define __TIM5_CLK_SLEEP_DISABLE __HAL_RCC_TIM5_CLK_SLEEP_DISABLE
-#define __TIM5_CLK_SLEEP_ENABLE __HAL_RCC_TIM5_CLK_SLEEP_ENABLE
-#define __TIM5_FORCE_RESET __HAL_RCC_TIM5_FORCE_RESET
-#define __TIM5_RELEASE_RESET __HAL_RCC_TIM5_RELEASE_RESET
-#define __TIM6_CLK_DISABLE __HAL_RCC_TIM6_CLK_DISABLE
-#define __TIM6_CLK_ENABLE __HAL_RCC_TIM6_CLK_ENABLE
-#define __TIM6_CLK_SLEEP_DISABLE __HAL_RCC_TIM6_CLK_SLEEP_DISABLE
-#define __TIM6_CLK_SLEEP_ENABLE __HAL_RCC_TIM6_CLK_SLEEP_ENABLE
-#define __TIM6_FORCE_RESET __HAL_RCC_TIM6_FORCE_RESET
-#define __TIM6_RELEASE_RESET __HAL_RCC_TIM6_RELEASE_RESET
-#define __TIM7_CLK_DISABLE __HAL_RCC_TIM7_CLK_DISABLE
-#define __TIM7_CLK_ENABLE __HAL_RCC_TIM7_CLK_ENABLE
-#define __TIM7_CLK_SLEEP_DISABLE __HAL_RCC_TIM7_CLK_SLEEP_DISABLE
-#define __TIM7_CLK_SLEEP_ENABLE __HAL_RCC_TIM7_CLK_SLEEP_ENABLE
-#define __TIM7_FORCE_RESET __HAL_RCC_TIM7_FORCE_RESET
-#define __TIM7_RELEASE_RESET __HAL_RCC_TIM7_RELEASE_RESET
-#define __TIM8_CLK_DISABLE __HAL_RCC_TIM8_CLK_DISABLE
-#define __TIM8_CLK_ENABLE __HAL_RCC_TIM8_CLK_ENABLE
-#define __TIM8_CLK_SLEEP_DISABLE __HAL_RCC_TIM8_CLK_SLEEP_DISABLE
-#define __TIM8_CLK_SLEEP_ENABLE __HAL_RCC_TIM8_CLK_SLEEP_ENABLE
-#define __TIM8_FORCE_RESET __HAL_RCC_TIM8_FORCE_RESET
-#define __TIM8_RELEASE_RESET __HAL_RCC_TIM8_RELEASE_RESET
-#define __TIM9_CLK_DISABLE __HAL_RCC_TIM9_CLK_DISABLE
-#define __TIM9_CLK_ENABLE __HAL_RCC_TIM9_CLK_ENABLE
-#define __TIM9_FORCE_RESET __HAL_RCC_TIM9_FORCE_RESET
-#define __TIM9_RELEASE_RESET __HAL_RCC_TIM9_RELEASE_RESET
-#define __TSC_CLK_DISABLE __HAL_RCC_TSC_CLK_DISABLE
-#define __TSC_CLK_ENABLE __HAL_RCC_TSC_CLK_ENABLE
-#define __TSC_CLK_SLEEP_DISABLE __HAL_RCC_TSC_CLK_SLEEP_DISABLE
-#define __TSC_CLK_SLEEP_ENABLE __HAL_RCC_TSC_CLK_SLEEP_ENABLE
-#define __TSC_FORCE_RESET __HAL_RCC_TSC_FORCE_RESET
-#define __TSC_RELEASE_RESET __HAL_RCC_TSC_RELEASE_RESET
-#define __UART4_CLK_DISABLE __HAL_RCC_UART4_CLK_DISABLE
-#define __UART4_CLK_ENABLE __HAL_RCC_UART4_CLK_ENABLE
-#define __UART4_CLK_SLEEP_DISABLE __HAL_RCC_UART4_CLK_SLEEP_DISABLE
-#define __UART4_CLK_SLEEP_ENABLE __HAL_RCC_UART4_CLK_SLEEP_ENABLE
-#define __UART4_FORCE_RESET __HAL_RCC_UART4_FORCE_RESET
-#define __UART4_RELEASE_RESET __HAL_RCC_UART4_RELEASE_RESET
-#define __UART5_CLK_DISABLE __HAL_RCC_UART5_CLK_DISABLE
-#define __UART5_CLK_ENABLE __HAL_RCC_UART5_CLK_ENABLE
-#define __UART5_CLK_SLEEP_DISABLE __HAL_RCC_UART5_CLK_SLEEP_DISABLE
-#define __UART5_CLK_SLEEP_ENABLE __HAL_RCC_UART5_CLK_SLEEP_ENABLE
-#define __UART5_FORCE_RESET __HAL_RCC_UART5_FORCE_RESET
-#define __UART5_RELEASE_RESET __HAL_RCC_UART5_RELEASE_RESET
-#define __USART1_CLK_DISABLE __HAL_RCC_USART1_CLK_DISABLE
-#define __USART1_CLK_ENABLE __HAL_RCC_USART1_CLK_ENABLE
-#define __USART1_CLK_SLEEP_DISABLE __HAL_RCC_USART1_CLK_SLEEP_DISABLE
-#define __USART1_CLK_SLEEP_ENABLE __HAL_RCC_USART1_CLK_SLEEP_ENABLE
-#define __USART1_FORCE_RESET __HAL_RCC_USART1_FORCE_RESET
-#define __USART1_RELEASE_RESET __HAL_RCC_USART1_RELEASE_RESET
-#define __USART2_CLK_DISABLE __HAL_RCC_USART2_CLK_DISABLE
-#define __USART2_CLK_ENABLE __HAL_RCC_USART2_CLK_ENABLE
-#define __USART2_CLK_SLEEP_DISABLE __HAL_RCC_USART2_CLK_SLEEP_DISABLE
-#define __USART2_CLK_SLEEP_ENABLE __HAL_RCC_USART2_CLK_SLEEP_ENABLE
-#define __USART2_FORCE_RESET __HAL_RCC_USART2_FORCE_RESET
-#define __USART2_RELEASE_RESET __HAL_RCC_USART2_RELEASE_RESET
-#define __USART3_CLK_DISABLE __HAL_RCC_USART3_CLK_DISABLE
-#define __USART3_CLK_ENABLE __HAL_RCC_USART3_CLK_ENABLE
-#define __USART3_CLK_SLEEP_DISABLE __HAL_RCC_USART3_CLK_SLEEP_DISABLE
-#define __USART3_CLK_SLEEP_ENABLE __HAL_RCC_USART3_CLK_SLEEP_ENABLE
-#define __USART3_FORCE_RESET __HAL_RCC_USART3_FORCE_RESET
-#define __USART3_RELEASE_RESET __HAL_RCC_USART3_RELEASE_RESET
-#define __USART4_CLK_DISABLE __HAL_RCC_USART4_CLK_DISABLE
-#define __USART4_CLK_ENABLE __HAL_RCC_USART4_CLK_ENABLE
-#define __USART4_CLK_SLEEP_ENABLE __HAL_RCC_USART4_CLK_SLEEP_ENABLE
-#define __USART4_CLK_SLEEP_DISABLE __HAL_RCC_USART4_CLK_SLEEP_DISABLE
-#define __USART4_FORCE_RESET __HAL_RCC_USART4_FORCE_RESET
-#define __USART4_RELEASE_RESET __HAL_RCC_USART4_RELEASE_RESET
-#define __USART5_CLK_DISABLE __HAL_RCC_USART5_CLK_DISABLE
-#define __USART5_CLK_ENABLE __HAL_RCC_USART5_CLK_ENABLE
-#define __USART5_CLK_SLEEP_ENABLE __HAL_RCC_USART5_CLK_SLEEP_ENABLE
-#define __USART5_CLK_SLEEP_DISABLE __HAL_RCC_USART5_CLK_SLEEP_DISABLE
-#define __USART5_FORCE_RESET __HAL_RCC_USART5_FORCE_RESET
-#define __USART5_RELEASE_RESET __HAL_RCC_USART5_RELEASE_RESET
-#define __USART7_CLK_DISABLE __HAL_RCC_USART7_CLK_DISABLE
-#define __USART7_CLK_ENABLE __HAL_RCC_USART7_CLK_ENABLE
-#define __USART7_FORCE_RESET __HAL_RCC_USART7_FORCE_RESET
-#define __USART7_RELEASE_RESET __HAL_RCC_USART7_RELEASE_RESET
-#define __USART8_CLK_DISABLE __HAL_RCC_USART8_CLK_DISABLE
-#define __USART8_CLK_ENABLE __HAL_RCC_USART8_CLK_ENABLE
-#define __USART8_FORCE_RESET __HAL_RCC_USART8_FORCE_RESET
-#define __USART8_RELEASE_RESET __HAL_RCC_USART8_RELEASE_RESET
-#define __USB_CLK_DISABLE __HAL_RCC_USB_CLK_DISABLE
-#define __USB_CLK_ENABLE __HAL_RCC_USB_CLK_ENABLE
-#define __USB_FORCE_RESET __HAL_RCC_USB_FORCE_RESET
-#define __USB_CLK_SLEEP_ENABLE __HAL_RCC_USB_CLK_SLEEP_ENABLE
-#define __USB_CLK_SLEEP_DISABLE __HAL_RCC_USB_CLK_SLEEP_DISABLE
-#define __USB_OTG_FS_CLK_DISABLE __HAL_RCC_USB_OTG_FS_CLK_DISABLE
-#define __USB_OTG_FS_CLK_ENABLE __HAL_RCC_USB_OTG_FS_CLK_ENABLE
-#define __USB_RELEASE_RESET __HAL_RCC_USB_RELEASE_RESET
-#define __WWDG_CLK_DISABLE __HAL_RCC_WWDG_CLK_DISABLE
-#define __WWDG_CLK_ENABLE __HAL_RCC_WWDG_CLK_ENABLE
-#define __WWDG_CLK_SLEEP_DISABLE __HAL_RCC_WWDG_CLK_SLEEP_DISABLE
-#define __WWDG_CLK_SLEEP_ENABLE __HAL_RCC_WWDG_CLK_SLEEP_ENABLE
-#define __WWDG_FORCE_RESET __HAL_RCC_WWDG_FORCE_RESET
-#define __WWDG_RELEASE_RESET __HAL_RCC_WWDG_RELEASE_RESET
-#define __TIM21_CLK_ENABLE __HAL_RCC_TIM21_CLK_ENABLE
-#define __TIM21_CLK_DISABLE __HAL_RCC_TIM21_CLK_DISABLE
-#define __TIM21_FORCE_RESET __HAL_RCC_TIM21_FORCE_RESET
-#define __TIM21_RELEASE_RESET __HAL_RCC_TIM21_RELEASE_RESET
-#define __TIM21_CLK_SLEEP_ENABLE __HAL_RCC_TIM21_CLK_SLEEP_ENABLE
-#define __TIM21_CLK_SLEEP_DISABLE __HAL_RCC_TIM21_CLK_SLEEP_DISABLE
-#define __TIM22_CLK_ENABLE __HAL_RCC_TIM22_CLK_ENABLE
-#define __TIM22_CLK_DISABLE __HAL_RCC_TIM22_CLK_DISABLE
-#define __TIM22_FORCE_RESET __HAL_RCC_TIM22_FORCE_RESET
-#define __TIM22_RELEASE_RESET __HAL_RCC_TIM22_RELEASE_RESET
-#define __TIM22_CLK_SLEEP_ENABLE __HAL_RCC_TIM22_CLK_SLEEP_ENABLE
-#define __TIM22_CLK_SLEEP_DISABLE __HAL_RCC_TIM22_CLK_SLEEP_DISABLE
-#define __CRS_CLK_DISABLE __HAL_RCC_CRS_CLK_DISABLE
-#define __CRS_CLK_ENABLE __HAL_RCC_CRS_CLK_ENABLE
-#define __CRS_CLK_SLEEP_DISABLE __HAL_RCC_CRS_CLK_SLEEP_DISABLE
-#define __CRS_CLK_SLEEP_ENABLE __HAL_RCC_CRS_CLK_SLEEP_ENABLE
-#define __CRS_FORCE_RESET __HAL_RCC_CRS_FORCE_RESET
-#define __CRS_RELEASE_RESET __HAL_RCC_CRS_RELEASE_RESET
-#define __RCC_BACKUPRESET_FORCE __HAL_RCC_BACKUPRESET_FORCE
-#define __RCC_BACKUPRESET_RELEASE __HAL_RCC_BACKUPRESET_RELEASE
-
-#define __USB_OTG_FS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET
-#define __USB_OTG_FS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET
-#define __USB_OTG_FS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE
-#define __USB_OTG_FS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE
-#define __USB_OTG_HS_CLK_DISABLE __HAL_RCC_USB_OTG_HS_CLK_DISABLE
-#define __USB_OTG_HS_CLK_ENABLE __HAL_RCC_USB_OTG_HS_CLK_ENABLE
-#define __USB_OTG_HS_ULPI_CLK_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE
-#define __USB_OTG_HS_ULPI_CLK_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE
-#define __TIM9_CLK_SLEEP_ENABLE __HAL_RCC_TIM9_CLK_SLEEP_ENABLE
-#define __TIM9_CLK_SLEEP_DISABLE __HAL_RCC_TIM9_CLK_SLEEP_DISABLE
-#define __TIM10_CLK_SLEEP_ENABLE __HAL_RCC_TIM10_CLK_SLEEP_ENABLE
-#define __TIM10_CLK_SLEEP_DISABLE __HAL_RCC_TIM10_CLK_SLEEP_DISABLE
-#define __TIM11_CLK_SLEEP_ENABLE __HAL_RCC_TIM11_CLK_SLEEP_ENABLE
-#define __TIM11_CLK_SLEEP_DISABLE __HAL_RCC_TIM11_CLK_SLEEP_DISABLE
-#define __ETHMACPTP_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE
-#define __ETHMACPTP_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE
-#define __ETHMACPTP_CLK_ENABLE __HAL_RCC_ETHMACPTP_CLK_ENABLE
-#define __ETHMACPTP_CLK_DISABLE __HAL_RCC_ETHMACPTP_CLK_DISABLE
-#define __HASH_CLK_ENABLE __HAL_RCC_HASH_CLK_ENABLE
-#define __HASH_FORCE_RESET __HAL_RCC_HASH_FORCE_RESET
-#define __HASH_RELEASE_RESET __HAL_RCC_HASH_RELEASE_RESET
-#define __HASH_CLK_SLEEP_ENABLE __HAL_RCC_HASH_CLK_SLEEP_ENABLE
-#define __HASH_CLK_SLEEP_DISABLE __HAL_RCC_HASH_CLK_SLEEP_DISABLE
-#define __HASH_CLK_DISABLE __HAL_RCC_HASH_CLK_DISABLE
-#define __SPI5_CLK_ENABLE __HAL_RCC_SPI5_CLK_ENABLE
-#define __SPI5_CLK_DISABLE __HAL_RCC_SPI5_CLK_DISABLE
-#define __SPI5_FORCE_RESET __HAL_RCC_SPI5_FORCE_RESET
-#define __SPI5_RELEASE_RESET __HAL_RCC_SPI5_RELEASE_RESET
-#define __SPI5_CLK_SLEEP_ENABLE __HAL_RCC_SPI5_CLK_SLEEP_ENABLE
-#define __SPI5_CLK_SLEEP_DISABLE __HAL_RCC_SPI5_CLK_SLEEP_DISABLE
-#define __SPI6_CLK_ENABLE __HAL_RCC_SPI6_CLK_ENABLE
-#define __SPI6_CLK_DISABLE __HAL_RCC_SPI6_CLK_DISABLE
-#define __SPI6_FORCE_RESET __HAL_RCC_SPI6_FORCE_RESET
-#define __SPI6_RELEASE_RESET __HAL_RCC_SPI6_RELEASE_RESET
-#define __SPI6_CLK_SLEEP_ENABLE __HAL_RCC_SPI6_CLK_SLEEP_ENABLE
-#define __SPI6_CLK_SLEEP_DISABLE __HAL_RCC_SPI6_CLK_SLEEP_DISABLE
-#define __LTDC_CLK_ENABLE __HAL_RCC_LTDC_CLK_ENABLE
-#define __LTDC_CLK_DISABLE __HAL_RCC_LTDC_CLK_DISABLE
-#define __LTDC_FORCE_RESET __HAL_RCC_LTDC_FORCE_RESET
-#define __LTDC_RELEASE_RESET __HAL_RCC_LTDC_RELEASE_RESET
-#define __LTDC_CLK_SLEEP_ENABLE __HAL_RCC_LTDC_CLK_SLEEP_ENABLE
-#define __ETHMAC_CLK_SLEEP_ENABLE __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE
-#define __ETHMAC_CLK_SLEEP_DISABLE __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE
-#define __ETHMACTX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE
-#define __ETHMACTX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE
-#define __ETHMACRX_CLK_SLEEP_ENABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE
-#define __ETHMACRX_CLK_SLEEP_DISABLE __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE
-#define __TIM12_CLK_SLEEP_ENABLE __HAL_RCC_TIM12_CLK_SLEEP_ENABLE
-#define __TIM12_CLK_SLEEP_DISABLE __HAL_RCC_TIM12_CLK_SLEEP_DISABLE
-#define __TIM13_CLK_SLEEP_ENABLE __HAL_RCC_TIM13_CLK_SLEEP_ENABLE
-#define __TIM13_CLK_SLEEP_DISABLE __HAL_RCC_TIM13_CLK_SLEEP_DISABLE
-#define __TIM14_CLK_SLEEP_ENABLE __HAL_RCC_TIM14_CLK_SLEEP_ENABLE
-#define __TIM14_CLK_SLEEP_DISABLE __HAL_RCC_TIM14_CLK_SLEEP_DISABLE
-#define __BKPSRAM_CLK_ENABLE __HAL_RCC_BKPSRAM_CLK_ENABLE
-#define __BKPSRAM_CLK_DISABLE __HAL_RCC_BKPSRAM_CLK_DISABLE
-#define __BKPSRAM_CLK_SLEEP_ENABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE
-#define __BKPSRAM_CLK_SLEEP_DISABLE __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE
-#define __CCMDATARAMEN_CLK_ENABLE __HAL_RCC_CCMDATARAMEN_CLK_ENABLE
-#define __CCMDATARAMEN_CLK_DISABLE __HAL_RCC_CCMDATARAMEN_CLK_DISABLE
-#define __USART6_CLK_ENABLE __HAL_RCC_USART6_CLK_ENABLE
-#define __USART6_CLK_DISABLE __HAL_RCC_USART6_CLK_DISABLE
-#define __USART6_FORCE_RESET __HAL_RCC_USART6_FORCE_RESET
-#define __USART6_RELEASE_RESET __HAL_RCC_USART6_RELEASE_RESET
-#define __USART6_CLK_SLEEP_ENABLE __HAL_RCC_USART6_CLK_SLEEP_ENABLE
-#define __USART6_CLK_SLEEP_DISABLE __HAL_RCC_USART6_CLK_SLEEP_DISABLE
-#define __SPI4_CLK_ENABLE __HAL_RCC_SPI4_CLK_ENABLE
-#define __SPI4_CLK_DISABLE __HAL_RCC_SPI4_CLK_DISABLE
-#define __SPI4_FORCE_RESET __HAL_RCC_SPI4_FORCE_RESET
-#define __SPI4_RELEASE_RESET __HAL_RCC_SPI4_RELEASE_RESET
-#define __SPI4_CLK_SLEEP_ENABLE __HAL_RCC_SPI4_CLK_SLEEP_ENABLE
-#define __SPI4_CLK_SLEEP_DISABLE __HAL_RCC_SPI4_CLK_SLEEP_DISABLE
-#define __GPIOI_CLK_ENABLE __HAL_RCC_GPIOI_CLK_ENABLE
-#define __GPIOI_CLK_DISABLE __HAL_RCC_GPIOI_CLK_DISABLE
-#define __GPIOI_FORCE_RESET __HAL_RCC_GPIOI_FORCE_RESET
-#define __GPIOI_RELEASE_RESET __HAL_RCC_GPIOI_RELEASE_RESET
-#define __GPIOI_CLK_SLEEP_ENABLE __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE
-#define __GPIOI_CLK_SLEEP_DISABLE __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE
-#define __GPIOJ_CLK_ENABLE __HAL_RCC_GPIOJ_CLK_ENABLE
-#define __GPIOJ_CLK_DISABLE __HAL_RCC_GPIOJ_CLK_DISABLE
-#define __GPIOJ_FORCE_RESET __HAL_RCC_GPIOJ_FORCE_RESET
-#define __GPIOJ_RELEASE_RESET __HAL_RCC_GPIOJ_RELEASE_RESET
-#define __GPIOJ_CLK_SLEEP_ENABLE __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE
-#define __GPIOJ_CLK_SLEEP_DISABLE __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE
-#define __GPIOK_CLK_ENABLE __HAL_RCC_GPIOK_CLK_ENABLE
-#define __GPIOK_CLK_DISABLE __HAL_RCC_GPIOK_CLK_DISABLE
-#define __GPIOK_RELEASE_RESET __HAL_RCC_GPIOK_RELEASE_RESET
-#define __GPIOK_CLK_SLEEP_ENABLE __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE
-#define __GPIOK_CLK_SLEEP_DISABLE __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE
-#define __ETH_CLK_ENABLE __HAL_RCC_ETH_CLK_ENABLE
-#define __ETH_CLK_DISABLE __HAL_RCC_ETH_CLK_DISABLE
-#define __DCMI_CLK_ENABLE __HAL_RCC_DCMI_CLK_ENABLE
-#define __DCMI_CLK_DISABLE __HAL_RCC_DCMI_CLK_DISABLE
-#define __DCMI_FORCE_RESET __HAL_RCC_DCMI_FORCE_RESET
-#define __DCMI_RELEASE_RESET __HAL_RCC_DCMI_RELEASE_RESET
-#define __DCMI_CLK_SLEEP_ENABLE __HAL_RCC_DCMI_CLK_SLEEP_ENABLE
-#define __DCMI_CLK_SLEEP_DISABLE __HAL_RCC_DCMI_CLK_SLEEP_DISABLE
-#define __UART7_CLK_ENABLE __HAL_RCC_UART7_CLK_ENABLE
-#define __UART7_CLK_DISABLE __HAL_RCC_UART7_CLK_DISABLE
-#define __UART7_RELEASE_RESET __HAL_RCC_UART7_RELEASE_RESET
-#define __UART7_FORCE_RESET __HAL_RCC_UART7_FORCE_RESET
-#define __UART7_CLK_SLEEP_ENABLE __HAL_RCC_UART7_CLK_SLEEP_ENABLE
-#define __UART7_CLK_SLEEP_DISABLE __HAL_RCC_UART7_CLK_SLEEP_DISABLE
-#define __UART8_CLK_ENABLE __HAL_RCC_UART8_CLK_ENABLE
-#define __UART8_CLK_DISABLE __HAL_RCC_UART8_CLK_DISABLE
-#define __UART8_FORCE_RESET __HAL_RCC_UART8_FORCE_RESET
-#define __UART8_RELEASE_RESET __HAL_RCC_UART8_RELEASE_RESET
-#define __UART8_CLK_SLEEP_ENABLE __HAL_RCC_UART8_CLK_SLEEP_ENABLE
-#define __UART8_CLK_SLEEP_DISABLE __HAL_RCC_UART8_CLK_SLEEP_DISABLE
-#define __OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
-#define __OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
-#define __OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET
-#define __OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET
-#define __OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
-#define __OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
-#define __HAL_RCC_OTGHS_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE
-#define __HAL_RCC_OTGHS_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE
-#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_ENABLED
-#define __HAL_RCC_OTGHS_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_IS_CLK_SLEEP_DISABLED
-#define __HAL_RCC_OTGHS_FORCE_RESET __HAL_RCC_USB_OTG_HS_FORCE_RESET
-#define __HAL_RCC_OTGHS_RELEASE_RESET __HAL_RCC_USB_OTG_HS_RELEASE_RESET
-#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_ENABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE
-#define __HAL_RCC_OTGHSULPI_CLK_SLEEP_DISABLE __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE
-#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_ENABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_ENABLED
-#define __HAL_RCC_OTGHSULPI_IS_CLK_SLEEP_DISABLED __HAL_RCC_USB_OTG_HS_ULPI_IS_CLK_SLEEP_DISABLED
-#define __CRYP_FORCE_RESET __HAL_RCC_CRYP_FORCE_RESET
-#define __SRAM3_CLK_SLEEP_ENABLE __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE
-#define __CAN2_CLK_SLEEP_ENABLE __HAL_RCC_CAN2_CLK_SLEEP_ENABLE
-#define __CAN2_CLK_SLEEP_DISABLE __HAL_RCC_CAN2_CLK_SLEEP_DISABLE
-#define __DAC_CLK_SLEEP_ENABLE __HAL_RCC_DAC_CLK_SLEEP_ENABLE
-#define __DAC_CLK_SLEEP_DISABLE __HAL_RCC_DAC_CLK_SLEEP_DISABLE
-#define __ADC2_CLK_SLEEP_ENABLE __HAL_RCC_ADC2_CLK_SLEEP_ENABLE
-#define __ADC2_CLK_SLEEP_DISABLE __HAL_RCC_ADC2_CLK_SLEEP_DISABLE
-#define __ADC3_CLK_SLEEP_ENABLE __HAL_RCC_ADC3_CLK_SLEEP_ENABLE
-#define __ADC3_CLK_SLEEP_DISABLE __HAL_RCC_ADC3_CLK_SLEEP_DISABLE
-#define __FSMC_FORCE_RESET __HAL_RCC_FSMC_FORCE_RESET
-#define __FSMC_RELEASE_RESET __HAL_RCC_FSMC_RELEASE_RESET
-#define __FSMC_CLK_SLEEP_ENABLE __HAL_RCC_FSMC_CLK_SLEEP_ENABLE
-#define __FSMC_CLK_SLEEP_DISABLE __HAL_RCC_FSMC_CLK_SLEEP_DISABLE
-#define __SDIO_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET
-#define __SDIO_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET
-#define __SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
-#define __SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
-#define __DMA2D_CLK_ENABLE __HAL_RCC_DMA2D_CLK_ENABLE
-#define __DMA2D_CLK_DISABLE __HAL_RCC_DMA2D_CLK_DISABLE
-#define __DMA2D_FORCE_RESET __HAL_RCC_DMA2D_FORCE_RESET
-#define __DMA2D_RELEASE_RESET __HAL_RCC_DMA2D_RELEASE_RESET
-#define __DMA2D_CLK_SLEEP_ENABLE __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE
-#define __DMA2D_CLK_SLEEP_DISABLE __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE
-
-/* alias define maintained for legacy */
-#define __HAL_RCC_OTGFS_FORCE_RESET __HAL_RCC_USB_OTG_FS_FORCE_RESET
-#define __HAL_RCC_OTGFS_RELEASE_RESET __HAL_RCC_USB_OTG_FS_RELEASE_RESET
-
-#if defined(STM32F4)
-#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
-#define __HAL_RCC_SDMMC1_FORCE_RESET __HAL_RCC_SDIO_FORCE_RESET
-#define __HAL_RCC_SDMMC1_RELEASE_RESET __HAL_RCC_SDIO_RELEASE_RESET
-#define __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE __HAL_RCC_SDIO_CLK_SLEEP_ENABLE
-#define __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE __HAL_RCC_SDIO_CLK_SLEEP_DISABLE
-#define __HAL_RCC_SDMMC1_CLK_ENABLE __HAL_RCC_SDIO_CLK_ENABLE
-#define __HAL_RCC_SDMMC1_CLK_DISABLE __HAL_RCC_SDIO_CLK_DISABLE
-#define Sdmmc1ClockSelection SdioClockSelection
-#define RCC_PERIPHCLK_SDMMC1 RCC_PERIPHCLK_SDIO
-#define RCC_SDMMC1CLKSOURCE_CLK48 RCC_SDIOCLKSOURCE_CK48
-#define RCC_SDMMC1CLKSOURCE_SYSCLK RCC_SDIOCLKSOURCE_SYSCLK
-#define __HAL_RCC_SDMMC1_CONFIG __HAL_RCC_SDIO_CONFIG
-#define __HAL_RCC_GET_SDMMC1_SOURCE __HAL_RCC_GET_SDIO_SOURCE
-#endif
-
-#if defined(STM32F7) || defined(STM32L4)
-#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE
-#define __HAL_RCC_SDIO_FORCE_RESET __HAL_RCC_SDMMC1_FORCE_RESET
-#define __HAL_RCC_SDIO_RELEASE_RESET __HAL_RCC_SDMMC1_RELEASE_RESET
-#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE __HAL_RCC_SDMMC1_CLK_SLEEP_ENABLE
-#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE __HAL_RCC_SDMMC1_CLK_SLEEP_DISABLE
-#define __HAL_RCC_SDIO_CLK_ENABLE __HAL_RCC_SDMMC1_CLK_ENABLE
-#define __HAL_RCC_SDIO_CLK_DISABLE __HAL_RCC_SDMMC1_CLK_DISABLE
-#define SdioClockSelection Sdmmc1ClockSelection
-#define RCC_PERIPHCLK_SDIO RCC_PERIPHCLK_SDMMC1
-#define __HAL_RCC_SDIO_CONFIG __HAL_RCC_SDMMC1_CONFIG
-#define __HAL_RCC_GET_SDIO_SOURCE __HAL_RCC_GET_SDMMC1_SOURCE
-#endif
-
-#if defined(STM32F7)
-#define RCC_SDIOCLKSOURCE_CK48 RCC_SDMMC1CLKSOURCE_CLK48
-#define RCC_SDIOCLKSOURCE_SYSCLK RCC_SDMMC1CLKSOURCE_SYSCLK
-#endif
-
-#define __HAL_RCC_I2SCLK __HAL_RCC_I2S_CONFIG
-#define __HAL_RCC_I2SCLK_CONFIG __HAL_RCC_I2S_CONFIG
-
-#define __RCC_PLLSRC RCC_GET_PLL_OSCSOURCE
-
-#define IS_RCC_MSIRANGE IS_RCC_MSI_CLOCK_RANGE
-#define IS_RCC_RTCCLK_SOURCE IS_RCC_RTCCLKSOURCE
-#define IS_RCC_SYSCLK_DIV IS_RCC_HCLK
-#define IS_RCC_HCLK_DIV IS_RCC_PCLK
-
-#define IS_RCC_MCOSOURCE IS_RCC_MCO1SOURCE
-#define RCC_MCO_NODIV RCC_MCODIV_1
-#define RCC_RTCCLKSOURCE_NONE RCC_RTCCLKSOURCE_NO_CLK
-
-#define HSION_BitNumber RCC_HSION_BIT_NUMBER
-#define CSSON_BitNumber RCC_CSSON_BIT_NUMBER
-#define PLLON_BitNumber RCC_PLLON_BIT_NUMBER
-#define PLLI2SON_BitNumber RCC_PLLI2SON_BIT_NUMBER
-#define I2SSRC_BitNumber RCC_I2SSRC_BIT_NUMBER
-#define RTCEN_BitNumber RCC_RTCEN_BIT_NUMBER
-#define BDRST_BitNumber RCC_BDRST_BIT_NUMBER
-#define LSION_BitNumber RCC_LSION_BIT_NUMBER
-#define PLLSAION_BitNumber RCC_PLLSAION_BIT_NUMBER
-#define TIMPRE_BitNumber RCC_TIMPRE_BIT_NUMBER
-
-#define CR_BYTE2_ADDRESS RCC_CR_BYTE2_ADDRESS
-#define CIR_BYTE1_ADDRESS RCC_CIR_BYTE1_ADDRESS
-#define CIR_BYTE2_ADDRESS RCC_CIR_BYTE2_ADDRESS
-#define BDCR_BYTE0_ADDRESS RCC_BDCR_BYTE0_ADDRESS
-#define DBP_TIMEOUT_VALUE RCC_DBP_TIMEOUT_VALUE
-#define LSE_TIMEOUT_VALUE RCC_LSE_TIMEOUT_VALUE
-
-#define CR_HSION_BB RCC_CR_HSION_BB
-#define CR_CSSON_BB RCC_CR_CSSON_BB
-#define CR_PLLON_BB RCC_CR_PLLON_BB
-#define CR_PLLI2SON_BB RCC_CR_PLLI2SON_BB
-#define CR_MSION_BB RCC_CR_MSION_BB
-#define CSR_LSION_BB RCC_CSR_LSION_BB
-#define CSR_LSEON_BB RCC_CSR_LSEON_BB
-#define CSR_LSEBYP_BB RCC_CSR_LSEBYP_BB
-#define CSR_RTCEN_BB RCC_CSR_RTCEN_BB
-#define CSR_RTCRST_BB RCC_CSR_RTCRST_BB
-#define CFGR_I2SSRC_BB RCC_CFGR_I2SSRC_BB
-#define BDCR_RTCEN_BB RCC_BDCR_RTCEN_BB
-#define BDCR_BDRST_BB RCC_BDCR_BDRST_BB
-#define CR_PLLSAION_BB RCC_CR_PLLSAION_BB
-#define DCKCFGR_TIMPRE_BB RCC_DCKCFGR_TIMPRE_BB
-
-/**
- * @}
- */
-
-/** @defgroup HAL_RNG_Aliased_Macros HAL RNG Aliased Macros maintained for legacy purpose
- * @{
- */
-#define HAL_RNG_ReadyCallback(__HANDLE__) HAL_RNG_ReadyDataCallback((__HANDLE__), uint32_t random32bit)
-
-/**
- * @}
- */
-
-/** @defgroup HAL_RTC_Aliased_Macros HAL RTC Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define __HAL_RTC_CLEAR_FLAG __HAL_RTC_EXTI_CLEAR_FLAG
-#define __HAL_RTC_DISABLE_IT __HAL_RTC_EXTI_DISABLE_IT
-#define __HAL_RTC_ENABLE_IT __HAL_RTC_EXTI_ENABLE_IT
-
-#if defined (STM32F1)
-#define __HAL_RTC_EXTI_CLEAR_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_CLEAR_FLAG()
-
-#define __HAL_RTC_EXTI_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_ENABLE_IT()
-
-#define __HAL_RTC_EXTI_DISABLE_IT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_DISABLE_IT()
-
-#define __HAL_RTC_EXTI_GET_FLAG(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GET_FLAG()
-
-#define __HAL_RTC_EXTI_GENERATE_SWIT(RTC_EXTI_LINE_ALARM_EVENT) __HAL_RTC_ALARM_EXTI_GENERATE_SWIT()
-#else
-#define __HAL_RTC_EXTI_CLEAR_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG()))
-#define __HAL_RTC_EXTI_ENABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_ENABLE_IT() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT()))
-#define __HAL_RTC_EXTI_DISABLE_IT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_DISABLE_IT() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT()))
-#define __HAL_RTC_EXTI_GET_FLAG(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GET_FLAG() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG()))
-#define __HAL_RTC_EXTI_GENERATE_SWIT(__EXTI_LINE__) (((__EXTI_LINE__) == RTC_EXTI_LINE_ALARM_EVENT) ? __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() : \
- (((__EXTI_LINE__) == RTC_EXTI_LINE_WAKEUPTIMER_EVENT) ? __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() : \
- __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT()))
-#endif /* STM32F1 */
-
-#define IS_ALARM IS_RTC_ALARM
-#define IS_ALARM_MASK IS_RTC_ALARM_MASK
-#define IS_TAMPER IS_RTC_TAMPER
-#define IS_TAMPER_ERASE_MODE IS_RTC_TAMPER_ERASE_MODE
-#define IS_TAMPER_FILTER IS_RTC_TAMPER_FILTER
-#define IS_TAMPER_INTERRUPT IS_RTC_TAMPER_INTERRUPT
-#define IS_TAMPER_MASKFLAG_STATE IS_RTC_TAMPER_MASKFLAG_STATE
-#define IS_TAMPER_PRECHARGE_DURATION IS_RTC_TAMPER_PRECHARGE_DURATION
-#define IS_TAMPER_PULLUP_STATE IS_RTC_TAMPER_PULLUP_STATE
-#define IS_TAMPER_SAMPLING_FREQ IS_RTC_TAMPER_SAMPLING_FREQ
-#define IS_TAMPER_TIMESTAMPONTAMPER_DETECTION IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION
-#define IS_TAMPER_TRIGGER IS_RTC_TAMPER_TRIGGER
-#define IS_WAKEUP_CLOCK IS_RTC_WAKEUP_CLOCK
-#define IS_WAKEUP_COUNTER IS_RTC_WAKEUP_COUNTER
-
-#define __RTC_WRITEPROTECTION_ENABLE __HAL_RTC_WRITEPROTECTION_ENABLE
-#define __RTC_WRITEPROTECTION_DISABLE __HAL_RTC_WRITEPROTECTION_DISABLE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_SD_Aliased_Macros HAL SD Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define SD_OCR_CID_CSD_OVERWRIETE SD_OCR_CID_CSD_OVERWRITE
-#define SD_CMD_SD_APP_STAUS SD_CMD_SD_APP_STATUS
-
-#if defined(STM32F4)
-#define SD_SDMMC_DISABLED SD_SDIO_DISABLED
-#define SD_SDMMC_FUNCTION_BUSY SD_SDIO_FUNCTION_BUSY
-#define SD_SDMMC_FUNCTION_FAILED SD_SDIO_FUNCTION_FAILED
-#define SD_SDMMC_UNKNOWN_FUNCTION SD_SDIO_UNKNOWN_FUNCTION
-#define SD_CMD_SDMMC_SEN_OP_COND SD_CMD_SDIO_SEN_OP_COND
-#define SD_CMD_SDMMC_RW_DIRECT SD_CMD_SDIO_RW_DIRECT
-#define SD_CMD_SDMMC_RW_EXTENDED SD_CMD_SDIO_RW_EXTENDED
-#define __HAL_SD_SDMMC_ENABLE __HAL_SD_SDIO_ENABLE
-#define __HAL_SD_SDMMC_DISABLE __HAL_SD_SDIO_DISABLE
-#define __HAL_SD_SDMMC_DMA_ENABLE __HAL_SD_SDIO_DMA_ENABLE
-#define __HAL_SD_SDMMC_DMA_DISABLE __HAL_SD_SDIO_DMA_DISABL
-#define __HAL_SD_SDMMC_ENABLE_IT __HAL_SD_SDIO_ENABLE_IT
-#define __HAL_SD_SDMMC_DISABLE_IT __HAL_SD_SDIO_DISABLE_IT
-#define __HAL_SD_SDMMC_GET_FLAG __HAL_SD_SDIO_GET_FLAG
-#define __HAL_SD_SDMMC_CLEAR_FLAG __HAL_SD_SDIO_CLEAR_FLAG
-#define __HAL_SD_SDMMC_GET_IT __HAL_SD_SDIO_GET_IT
-#define __HAL_SD_SDMMC_CLEAR_IT __HAL_SD_SDIO_CLEAR_IT
-#define SDMMC_STATIC_FLAGS SDIO_STATIC_FLAGS
-#define SDMMC_CMD0TIMEOUT SDIO_CMD0TIMEOUT
-#define SD_SDMMC_SEND_IF_COND SD_SDIO_SEND_IF_COND
-/* alias CMSIS */
-#define SDMMC1_IRQn SDIO_IRQn
-#define SDMMC1_IRQHandler SDIO_IRQHandler
-#endif
-
-#if defined(STM32F7) || defined(STM32L4)
-#define SD_SDIO_DISABLED SD_SDMMC_DISABLED
-#define SD_SDIO_FUNCTION_BUSY SD_SDMMC_FUNCTION_BUSY
-#define SD_SDIO_FUNCTION_FAILED SD_SDMMC_FUNCTION_FAILED
-#define SD_SDIO_UNKNOWN_FUNCTION SD_SDMMC_UNKNOWN_FUNCTION
-#define SD_CMD_SDIO_SEN_OP_COND SD_CMD_SDMMC_SEN_OP_COND
-#define SD_CMD_SDIO_RW_DIRECT SD_CMD_SDMMC_RW_DIRECT
-#define SD_CMD_SDIO_RW_EXTENDED SD_CMD_SDMMC_RW_EXTENDED
-#define __HAL_SD_SDIO_ENABLE __HAL_SD_SDMMC_ENABLE
-#define __HAL_SD_SDIO_DISABLE __HAL_SD_SDMMC_DISABLE
-#define __HAL_SD_SDIO_DMA_ENABLE __HAL_SD_SDMMC_DMA_ENABLE
-#define __HAL_SD_SDIO_DMA_DISABL __HAL_SD_SDMMC_DMA_DISABLE
-#define __HAL_SD_SDIO_ENABLE_IT __HAL_SD_SDMMC_ENABLE_IT
-#define __HAL_SD_SDIO_DISABLE_IT __HAL_SD_SDMMC_DISABLE_IT
-#define __HAL_SD_SDIO_GET_FLAG __HAL_SD_SDMMC_GET_FLAG
-#define __HAL_SD_SDIO_CLEAR_FLAG __HAL_SD_SDMMC_CLEAR_FLAG
-#define __HAL_SD_SDIO_GET_IT __HAL_SD_SDMMC_GET_IT
-#define __HAL_SD_SDIO_CLEAR_IT __HAL_SD_SDMMC_CLEAR_IT
-#define SDIO_STATIC_FLAGS SDMMC_STATIC_FLAGS
-#define SDIO_CMD0TIMEOUT SDMMC_CMD0TIMEOUT
-#define SD_SDIO_SEND_IF_COND SD_SDMMC_SEND_IF_COND
-/* alias CMSIS for compatibilities */
-#define SDIO_IRQn SDMMC1_IRQn
-#define SDIO_IRQHandler SDMMC1_IRQHandler
-#endif
-/**
- * @}
- */
-
-/** @defgroup HAL_SMARTCARD_Aliased_Macros HAL SMARTCARD Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define __SMARTCARD_ENABLE_IT __HAL_SMARTCARD_ENABLE_IT
-#define __SMARTCARD_DISABLE_IT __HAL_SMARTCARD_DISABLE_IT
-#define __SMARTCARD_ENABLE __HAL_SMARTCARD_ENABLE
-#define __SMARTCARD_DISABLE __HAL_SMARTCARD_DISABLE
-#define __SMARTCARD_DMA_REQUEST_ENABLE __HAL_SMARTCARD_DMA_REQUEST_ENABLE
-#define __SMARTCARD_DMA_REQUEST_DISABLE __HAL_SMARTCARD_DMA_REQUEST_DISABLE
-
-#define __HAL_SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE
-#define __SMARTCARD_GETCLOCKSOURCE SMARTCARD_GETCLOCKSOURCE
-
-#define IS_SMARTCARD_ONEBIT_SAMPLING IS_SMARTCARD_ONE_BIT_SAMPLE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_SMBUS_Aliased_Macros HAL SMBUS Aliased Macros maintained for legacy purpose
- * @{
- */
-#define __HAL_SMBUS_RESET_CR1 SMBUS_RESET_CR1
-#define __HAL_SMBUS_RESET_CR2 SMBUS_RESET_CR2
-#define __HAL_SMBUS_GENERATE_START SMBUS_GENERATE_START
-#define __HAL_SMBUS_GET_ADDR_MATCH SMBUS_GET_ADDR_MATCH
-#define __HAL_SMBUS_GET_DIR SMBUS_GET_DIR
-#define __HAL_SMBUS_GET_STOP_MODE SMBUS_GET_STOP_MODE
-#define __HAL_SMBUS_GET_PEC_MODE SMBUS_GET_PEC_MODE
-#define __HAL_SMBUS_GET_ALERT_ENABLED SMBUS_GET_ALERT_ENABLED
-/**
- * @}
- */
-
-/** @defgroup HAL_SPI_Aliased_Macros HAL SPI Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define __HAL_SPI_1LINE_TX SPI_1LINE_TX
-#define __HAL_SPI_1LINE_RX SPI_1LINE_RX
-#define __HAL_SPI_RESET_CRC SPI_RESET_CRC
-
-/**
- * @}
- */
-
-/** @defgroup HAL_UART_Aliased_Macros HAL UART Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define __HAL_UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE
-#define __HAL_UART_MASK_COMPUTATION UART_MASK_COMPUTATION
-#define __UART_GETCLOCKSOURCE UART_GETCLOCKSOURCE
-#define __UART_MASK_COMPUTATION UART_MASK_COMPUTATION
-
-#define IS_UART_WAKEUPMETHODE IS_UART_WAKEUPMETHOD
-
-#define IS_UART_ONEBIT_SAMPLE IS_UART_ONE_BIT_SAMPLE
-#define IS_UART_ONEBIT_SAMPLING IS_UART_ONE_BIT_SAMPLE
-
-/**
- * @}
- */
-
-
-/** @defgroup HAL_USART_Aliased_Macros HAL USART Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define __USART_ENABLE_IT __HAL_USART_ENABLE_IT
-#define __USART_DISABLE_IT __HAL_USART_DISABLE_IT
-#define __USART_ENABLE __HAL_USART_ENABLE
-#define __USART_DISABLE __HAL_USART_DISABLE
-
-#define __HAL_USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
-#define __USART_GETCLOCKSOURCE USART_GETCLOCKSOURCE
-
-/**
- * @}
- */
-
-/** @defgroup HAL_USB_Aliased_Macros HAL USB Aliased Macros maintained for legacy purpose
- * @{
- */
-#define USB_EXTI_LINE_WAKEUP USB_WAKEUP_EXTI_LINE
-
-#define USB_FS_EXTI_TRIGGER_RISING_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE
-#define USB_FS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE
-#define USB_FS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE
-#define USB_FS_EXTI_LINE_WAKEUP USB_OTG_FS_WAKEUP_EXTI_LINE
-
-#define USB_HS_EXTI_TRIGGER_RISING_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE
-#define USB_HS_EXTI_TRIGGER_FALLING_EDGE USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE
-#define USB_HS_EXTI_TRIGGER_BOTH_EDGE USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE
-#define USB_HS_EXTI_LINE_WAKEUP USB_OTG_HS_WAKEUP_EXTI_LINE
-
-#define __HAL_USB_EXTI_ENABLE_IT __HAL_USB_WAKEUP_EXTI_ENABLE_IT
-#define __HAL_USB_EXTI_DISABLE_IT __HAL_USB_WAKEUP_EXTI_DISABLE_IT
-#define __HAL_USB_EXTI_GET_FLAG __HAL_USB_WAKEUP_EXTI_GET_FLAG
-#define __HAL_USB_EXTI_CLEAR_FLAG __HAL_USB_WAKEUP_EXTI_CLEAR_FLAG
-#define __HAL_USB_EXTI_SET_RISING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_EDGE
-#define __HAL_USB_EXTI_SET_FALLING_EDGE_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_FALLING_EDGE
-#define __HAL_USB_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
-
-#define __HAL_USB_FS_EXTI_ENABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT
-#define __HAL_USB_FS_EXTI_DISABLE_IT __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT
-#define __HAL_USB_FS_EXTI_GET_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG
-#define __HAL_USB_FS_EXTI_CLEAR_FLAG __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG
-#define __HAL_USB_FS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE
-#define __HAL_USB_FS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
-#define __HAL_USB_FS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
-#define __HAL_USB_FS_EXTI_GENERATE_SWIT __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT
-
-#define __HAL_USB_HS_EXTI_ENABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT
-#define __HAL_USB_HS_EXTI_DISABLE_IT __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT
-#define __HAL_USB_HS_EXTI_GET_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG
-#define __HAL_USB_HS_EXTI_CLEAR_FLAG __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG
-#define __HAL_USB_HS_EXTI_SET_RISING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE
-#define __HAL_USB_HS_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE
-#define __HAL_USB_HS_EXTI_SET_FALLINGRISING_TRIGGER __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE
-#define __HAL_USB_HS_EXTI_GENERATE_SWIT __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT
-
-#define HAL_PCD_ActiveRemoteWakeup HAL_PCD_ActivateRemoteWakeup
-#define HAL_PCD_DeActiveRemoteWakeup HAL_PCD_DeActivateRemoteWakeup
-
-#define HAL_PCD_SetTxFiFo HAL_PCDEx_SetTxFiFo
-#define HAL_PCD_SetRxFiFo HAL_PCDEx_SetRxFiFo
-/**
- * @}
- */
-
-/** @defgroup HAL_TIM_Aliased_Macros HAL TIM Aliased Macros maintained for legacy purpose
- * @{
- */
-#define __HAL_TIM_SetICPrescalerValue TIM_SET_ICPRESCALERVALUE
-#define __HAL_TIM_ResetICPrescalerValue TIM_RESET_ICPRESCALERVALUE
-
-#define TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE
-#define TIM_GET_CLEAR_IT __HAL_TIM_CLEAR_IT
-
-#define __HAL_TIM_GET_ITSTATUS __HAL_TIM_GET_IT_SOURCE
-
-#define __HAL_TIM_DIRECTION_STATUS __HAL_TIM_IS_TIM_COUNTING_DOWN
-#define __HAL_TIM_PRESCALER __HAL_TIM_SET_PRESCALER
-#define __HAL_TIM_SetCounter __HAL_TIM_SET_COUNTER
-#define __HAL_TIM_GetCounter __HAL_TIM_GET_COUNTER
-#define __HAL_TIM_SetAutoreload __HAL_TIM_SET_AUTORELOAD
-#define __HAL_TIM_GetAutoreload __HAL_TIM_GET_AUTORELOAD
-#define __HAL_TIM_SetClockDivision __HAL_TIM_SET_CLOCKDIVISION
-#define __HAL_TIM_GetClockDivision __HAL_TIM_GET_CLOCKDIVISION
-#define __HAL_TIM_SetICPrescaler __HAL_TIM_SET_ICPRESCALER
-#define __HAL_TIM_GetICPrescaler __HAL_TIM_GET_ICPRESCALER
-#define __HAL_TIM_SetCompare __HAL_TIM_SET_COMPARE
-#define __HAL_TIM_GetCompare __HAL_TIM_GET_COMPARE
-
-#define TIM_TS_ITR0 ((uint32_t)0x0000)
-#define TIM_TS_ITR1 ((uint32_t)0x0010)
-#define TIM_TS_ITR2 ((uint32_t)0x0020)
-#define TIM_TS_ITR3 ((uint32_t)0x0030)
-#define IS_TIM_INTERNAL_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \
- ((SELECTION) == TIM_TS_ITR1) || \
- ((SELECTION) == TIM_TS_ITR2) || \
- ((SELECTION) == TIM_TS_ITR3))
-
-#define TIM_CHANNEL_1 ((uint32_t)0x0000)
-#define TIM_CHANNEL_2 ((uint32_t)0x0004)
-#define IS_TIM_PWMI_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \
- ((CHANNEL) == TIM_CHANNEL_2))
-
-#define TIM_OUTPUTNSTATE_DISABLE ((uint32_t)0x0000)
-#define TIM_OUTPUTNSTATE_ENABLE (TIM_CCER_CC1NE)
-
-#define IS_TIM_OUTPUTN_STATE(STATE) (((STATE) == TIM_OUTPUTNSTATE_DISABLE) || \
- ((STATE) == TIM_OUTPUTNSTATE_ENABLE))
-
-#define TIM_OUTPUTSTATE_DISABLE ((uint32_t)0x0000)
-#define TIM_OUTPUTSTATE_ENABLE (TIM_CCER_CC1E)
-
-#define IS_TIM_OUTPUT_STATE(STATE) (((STATE) == TIM_OUTPUTSTATE_DISABLE) || \
- ((STATE) == TIM_OUTPUTSTATE_ENABLE))
-/**
- * @}
- */
-
-/** @defgroup HAL_ETH_Aliased_Macros HAL ETH Aliased Macros maintained for legacy purpose
- * @{
- */
-
-#define __HAL_ETH_EXTI_ENABLE_IT __HAL_ETH_WAKEUP_EXTI_ENABLE_IT
-#define __HAL_ETH_EXTI_DISABLE_IT __HAL_ETH_WAKEUP_EXTI_DISABLE_IT
-#define __HAL_ETH_EXTI_GET_FLAG __HAL_ETH_WAKEUP_EXTI_GET_FLAG
-#define __HAL_ETH_EXTI_CLEAR_FLAG __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG
-#define __HAL_ETH_EXTI_SET_RISING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER
-#define __HAL_ETH_EXTI_SET_FALLING_EGDE_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER
-#define __HAL_ETH_EXTI_SET_FALLINGRISING_TRIGGER __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER
-
-#define ETH_PROMISCIOUSMODE_ENABLE ETH_PROMISCUOUS_MODE_ENABLE
-#define ETH_PROMISCIOUSMODE_DISABLE ETH_PROMISCUOUS_MODE_DISABLE
-#define IS_ETH_PROMISCIOUS_MODE IS_ETH_PROMISCUOUS_MODE
-/**
- * @}
- */
-
-/** @defgroup HAL_LTDC_Aliased_Macros HAL LTDC Aliased Macros maintained for legacy purpose
- * @{
- */
-#define __HAL_LTDC_LAYER LTDC_LAYER
-/**
- * @}
- */
-
-/** @defgroup HAL_SAI_Aliased_Macros HAL SAI Aliased Macros maintained for legacy purpose
- * @{
- */
-#define SAI_OUTPUTDRIVE_DISABLED SAI_OUTPUTDRIVE_DISABLE
-#define SAI_OUTPUTDRIVE_ENABLED SAI_OUTPUTDRIVE_ENABLE
-#define SAI_MASTERDIVIDER_ENABLED SAI_MASTERDIVIDER_ENABLE
-#define SAI_MASTERDIVIDER_DISABLED SAI_MASTERDIVIDER_DISABLE
-#define SAI_STREOMODE SAI_STEREOMODE
-#define SAI_FIFOStatus_Empty SAI_FIFOSTATUS_EMPTY
-#define SAI_FIFOStatus_Less1QuarterFull SAI_FIFOSTATUS_LESS1QUARTERFULL
-#define SAI_FIFOStatus_1QuarterFull SAI_FIFOSTATUS_1QUARTERFULL
-#define SAI_FIFOStatus_HalfFull SAI_FIFOSTATUS_HALFFULL
-#define SAI_FIFOStatus_3QuartersFull SAI_FIFOSTATUS_3QUARTERFULL
-#define SAI_FIFOStatus_Full SAI_FIFOSTATUS_FULL
-#define IS_SAI_BLOCK_MONO_STREO_MODE IS_SAI_BLOCK_MONO_STEREO_MODE
-
-/**
- * @}
- */
-
-
-/** @defgroup HAL_PPP_Aliased_Macros HAL PPP Aliased Macros maintained for legacy purpose
- * @{
- */
-
-/**
- * @}
- */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /* ___STM32_HAL_LEGACY */
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
-
diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h deleted file mode 100644 index b341816..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal.h +++ /dev/null @@ -1,233 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief This file contains all the functions prototypes for the HAL - * module driver. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_H -#define __STM32F4xx_HAL_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_conf.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup HAL - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup HAL_Exported_Macros HAL Exported Macros - * @{ - */ - -/** @brief Freeze/Unfreeze Peripherals in Debug mode - */ -#define __HAL_DBGMCU_FREEZE_TIM2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM2_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM3() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM3_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM4() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM4_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM5() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM5_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM6() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM6_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM7() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM7_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM12() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM12_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM13() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM13_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM14() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_TIM14_STOP)) -#define __HAL_DBGMCU_FREEZE_RTC() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_RTC_STOP)) -#define __HAL_DBGMCU_FREEZE_WWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_WWDG_STOP)) -#define __HAL_DBGMCU_FREEZE_IWDG() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_IWDG_STOP)) -#define __HAL_DBGMCU_FREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_FREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_FREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_FREEZE_CAN1() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN1_STOP)) -#define __HAL_DBGMCU_FREEZE_CAN2() (DBGMCU->APB1FZ |= (DBGMCU_APB1_FZ_DBG_CAN2_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM1() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM1_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM8() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM8_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM9() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM9_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM10() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM10_STOP)) -#define __HAL_DBGMCU_FREEZE_TIM11() (DBGMCU->APB2FZ |= (DBGMCU_APB2_FZ_DBG_TIM11_STOP)) - -#define __HAL_DBGMCU_UNFREEZE_TIM2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM2_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM3() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM3_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM4() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM4_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM5() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM5_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM6() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM6_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM7() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM7_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM12() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM12_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM13() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM13_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM14() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_TIM14_STOP)) -#define __HAL_DBGMCU_UNFREEZE_RTC() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_RTC_STOP)) -#define __HAL_DBGMCU_UNFREEZE_WWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_WWDG_STOP)) -#define __HAL_DBGMCU_UNFREEZE_IWDG() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_IWDG_STOP)) -#define __HAL_DBGMCU_UNFREEZE_I2C1_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C1_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_UNFREEZE_I2C2_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C2_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_UNFREEZE_I2C3_TIMEOUT() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_I2C3_SMBUS_TIMEOUT)) -#define __HAL_DBGMCU_UNFREEZE_CAN1() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN1_STOP)) -#define __HAL_DBGMCU_UNFREEZE_CAN2() (DBGMCU->APB1FZ &= ~(DBGMCU_APB1_FZ_DBG_CAN2_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM1() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM1_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM8() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM8_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM9() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM9_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM10() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM10_STOP)) -#define __HAL_DBGMCU_UNFREEZE_TIM11() (DBGMCU->APB2FZ &= ~(DBGMCU_APB2_FZ_DBG_TIM11_STOP)) - -/** @brief Main Flash memory mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_FLASH() (SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE)) - -/** @brief System Flash memory mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_SYSTEMFLASH() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ - SYSCFG->MEMRMP |= SYSCFG_MEMRMP_MEM_MODE_0;\ - }while(0); - -/** @brief Embedded SRAM mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_SRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ - SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_0 | SYSCFG_MEMRMP_MEM_MODE_1);\ - }while(0); - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) -/** @brief FSMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_FSMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ - SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\ - }while(0); -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -/** @brief FMC Bank1 (NOR/PSRAM 1 and 2) mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_FMC() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ - SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_1);\ - }while(0); - -/** @brief FMC/SDRAM Bank 1 and 2 mapped at 0x00000000 - */ -#define __HAL_SYSCFG_REMAPMEMORY_FMC_SDRAM() do {SYSCFG->MEMRMP &= ~(SYSCFG_MEMRMP_MEM_MODE);\ - SYSCFG->MEMRMP |= (SYSCFG_MEMRMP_MEM_MODE_2);\ - }while(0); -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup HAL_Exported_Functions - * @{ - */ -/** @addtogroup HAL_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions ******************************/ -HAL_StatusTypeDef HAL_Init(void); -HAL_StatusTypeDef HAL_DeInit(void); -void HAL_MspInit(void); -void HAL_MspDeInit(void); -HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority); -/** - * @} - */ - -/** @addtogroup HAL_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions ************************************************/ -void HAL_IncTick(void); -void HAL_Delay(__IO uint32_t Delay); -uint32_t HAL_GetTick(void); -void HAL_SuspendTick(void); -void HAL_ResumeTick(void); -uint32_t HAL_GetHalVersion(void); -uint32_t HAL_GetREVID(void); -uint32_t HAL_GetDEVID(void); -void HAL_DBGMCU_EnableDBGSleepMode(void); -void HAL_DBGMCU_DisableDBGSleepMode(void); -void HAL_DBGMCU_EnableDBGStopMode(void); -void HAL_DBGMCU_DisableDBGStopMode(void); -void HAL_DBGMCU_EnableDBGStandbyMode(void); -void HAL_DBGMCU_DisableDBGStandbyMode(void); -void HAL_EnableCompensationCell(void); -void HAL_DisableCompensationCell(void); -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -void HAL_EnableMemorySwappingBank(void); -void HAL_DisableMemorySwappingBank(void); -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @defgroup HAL_Private_Variables HAL Private Variables - * @{ - */ -/** - * @} - */ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup HAL_Private_Constants HAL Private Constants - * @{ - */ -/** - * @} - */ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc.h deleted file mode 100644 index 4758d85..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc.h +++ /dev/null @@ -1,766 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_adc.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of ADC HAL extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_ADC_H -#define __STM32F4xx_ADC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup ADC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup ADC_Exported_Types ADC Exported Types - * @{ - */ - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_ADC_STATE_RESET = 0x00, /*!< ADC not yet initialized or disabled */ - HAL_ADC_STATE_READY = 0x01, /*!< ADC peripheral ready for use */ - HAL_ADC_STATE_BUSY = 0x02, /*!< An internal process is ongoing */ - HAL_ADC_STATE_BUSY_REG = 0x12, /*!< Regular conversion is ongoing */ - HAL_ADC_STATE_BUSY_INJ = 0x22, /*!< Injected conversion is ongoing */ - HAL_ADC_STATE_BUSY_INJ_REG = 0x32, /*!< Injected and regular conversion are ongoing */ - HAL_ADC_STATE_TIMEOUT = 0x03, /*!< Timeout state */ - HAL_ADC_STATE_ERROR = 0x04, /*!< ADC state error */ - HAL_ADC_STATE_EOC = 0x05, /*!< Conversion is completed */ - HAL_ADC_STATE_EOC_REG = 0x15, /*!< Regular conversion is completed */ - HAL_ADC_STATE_EOC_INJ = 0x25, /*!< Injected conversion is completed */ - HAL_ADC_STATE_EOC_INJ_REG = 0x35, /*!< Injected and regular conversion are completed */ - HAL_ADC_STATE_AWD = 0x06 /*!< ADC state analog watchdog */ - -}HAL_ADC_StateTypeDef; - -/** - * @brief ADC Init structure definition - */ -typedef struct -{ - uint32_t ClockPrescaler; /*!< Select the frequency of the clock to the ADC. The clock is common for - all the ADCs. - This parameter can be a value of @ref ADC_ClockPrescaler */ - uint32_t Resolution; /*!< Configures the ADC resolution dual mode. - This parameter can be a value of @ref ADC_Resolution */ - uint32_t DataAlign; /*!< Specifies whether the ADC data alignment is left or right. - This parameter can be a value of @ref ADC_data_align */ - uint32_t ScanConvMode; /*!< Specifies whether the conversion is performed in Scan (multi channels) or - Single (one channel) mode. - This parameter can be set to ENABLE or DISABLE */ - uint32_t EOCSelection; /*!< Specifies whether the EOC flag is set - at the end of single channel conversion or at the end of all conversions. - This parameter can be a value of @ref ADC_EOCSelection - Note: Impact on overrun when not using DMA: When EOCSelection is set to ADC_EOC_SINGLE_CONV, - overrun detection is automatically enabled, in this case each conversion data must be read. - To perform ADC conversions without having to read all conversion data, this parameter must - be set to ADC_EOC_SEQ_CONV */ - uint32_t ContinuousConvMode; /*!< Specifies whether the conversion is performed in Continuous or Single mode. - This parameter can be set to ENABLE or DISABLE. */ - uint32_t DMAContinuousRequests; /*!< Specifies whether the DMA requests is performed in Continuous or in Single mode. - This parameter can be set to ENABLE or DISABLE. */ - uint32_t NbrOfConversion; /*!< Specifies the number of ADC conversions that will be done using the sequencer for - regular channel group. - This parameter must be a number between Min_Data = 1 and Max_Data = 16. */ - uint32_t DiscontinuousConvMode; /*!< Specifies whether the conversion is performed in Discontinuous or not - for regular channels. - This parameter can be set to ENABLE or DISABLE. */ - uint32_t NbrOfDiscConversion; /*!< Specifies the number of ADC discontinuous conversions that will be done - using the sequencer for regular channel group. - This parameter must be a number between Min_Data = 1 and Max_Data = 8. */ - uint32_t ExternalTrigConv; /*!< Selects the external event used to trigger the conversion start of regular group. - If set to ADC_SOFTWARE_START, external triggers are disabled. - This parameter can be a value of @ref ADC_External_trigger_Source_Regular - Note: This parameter can be modified only if there is no conversion is ongoing. */ - uint32_t ExternalTrigConvEdge; /*!< Selects the external trigger edge of regular group. - If trigger is set to ADC_SOFTWARE_START, this parameter is discarded. - This parameter can be a value of @ref ADC_External_trigger_edge_Regular - Note: This parameter can be modified only if there is no conversion is ongoing. */ -}ADC_InitTypeDef; - -/** - * @brief ADC handle Structure definition - */ -typedef struct -{ - ADC_TypeDef *Instance; /*!< Register base address */ - - ADC_InitTypeDef Init; /*!< ADC required parameters */ - - __IO uint32_t NbrOfCurrentConversionRank; /*!< ADC number of current conversion rank */ - - DMA_HandleTypeDef *DMA_Handle; /*!< Pointer DMA Handler */ - - HAL_LockTypeDef Lock; /*!< ADC locking object */ - - __IO HAL_ADC_StateTypeDef State; /*!< ADC communication state */ - - __IO uint32_t ErrorCode; /*!< ADC Error code */ -}ADC_HandleTypeDef; - -/** - * @brief ADC Configuration regular Channel structure definition - */ -typedef struct -{ - uint32_t Channel; /*!< The ADC channel to configure. - This parameter can be a value of @ref ADC_channels */ - uint32_t Rank; /*!< The rank in the regular group sequencer. - This parameter must be a number between Min_Data = 1 and Max_Data = 16 */ - uint32_t SamplingTime; /*!< The sample time value to be set for the selected channel. - This parameter can be a value of @ref ADC_sampling_times */ - uint32_t Offset; /*!< Reserved for future use, can be set to 0 */ -}ADC_ChannelConfTypeDef; - -/** - * @brief ADC Configuration multi-mode structure definition - */ -typedef struct -{ - uint32_t WatchdogMode; /*!< Configures the ADC analog watchdog mode. - This parameter can be a value of @ref ADC_analog_watchdog_selection */ - uint32_t HighThreshold; /*!< Configures the ADC analog watchdog High threshold value. - This parameter must be a 12-bit value. */ - uint32_t LowThreshold; /*!< Configures the ADC analog watchdog High threshold value. - This parameter must be a 12-bit value. */ - uint32_t Channel; /*!< Configures ADC channel for the analog watchdog. - This parameter has an effect only if watchdog mode is configured on single channel - This parameter can be a value of @ref ADC_channels */ - uint32_t ITMode; /*!< Specifies whether the analog watchdog is configured - is interrupt mode or in polling mode. - This parameter can be set to ENABLE or DISABLE */ - uint32_t WatchdogNumber; /*!< Reserved for future use, can be set to 0 */ -}ADC_AnalogWDGConfTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup ADC_Exported_Constants ADC Exported Constants - * @{ - */ - -/** @defgroup ADC_Error_Code ADC Error Code - * @{ - */ -#define HAL_ADC_ERROR_NONE ((uint32_t)0x00) /*!< No error */ -#define HAL_ADC_ERROR_OVR ((uint32_t)0x01) /*!< OVR error */ -#define HAL_ADC_ERROR_DMA ((uint32_t)0x02) /*!< DMA transfer error */ -/** - * @} - */ - - -/** @defgroup ADC_ClockPrescaler ADC Clock Prescaler - * @{ - */ -#define ADC_CLOCKPRESCALER_PCLK_DIV2 ((uint32_t)0x00000000) -#define ADC_CLOCKPRESCALER_PCLK_DIV4 ((uint32_t)ADC_CCR_ADCPRE_0) -#define ADC_CLOCKPRESCALER_PCLK_DIV6 ((uint32_t)ADC_CCR_ADCPRE_1) -#define ADC_CLOCKPRESCALER_PCLK_DIV8 ((uint32_t)ADC_CCR_ADCPRE) -/** - * @} - */ - -/** @defgroup ADC_delay_between_2_sampling_phases ADC Delay Between 2 Sampling Phases - * @{ - */ -#define ADC_TWOSAMPLINGDELAY_5CYCLES ((uint32_t)0x00000000) -#define ADC_TWOSAMPLINGDELAY_6CYCLES ((uint32_t)ADC_CCR_DELAY_0) -#define ADC_TWOSAMPLINGDELAY_7CYCLES ((uint32_t)ADC_CCR_DELAY_1) -#define ADC_TWOSAMPLINGDELAY_8CYCLES ((uint32_t)(ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0)) -#define ADC_TWOSAMPLINGDELAY_9CYCLES ((uint32_t)ADC_CCR_DELAY_2) -#define ADC_TWOSAMPLINGDELAY_10CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0)) -#define ADC_TWOSAMPLINGDELAY_11CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1)) -#define ADC_TWOSAMPLINGDELAY_12CYCLES ((uint32_t)(ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0)) -#define ADC_TWOSAMPLINGDELAY_13CYCLES ((uint32_t)ADC_CCR_DELAY_3) -#define ADC_TWOSAMPLINGDELAY_14CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_0)) -#define ADC_TWOSAMPLINGDELAY_15CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1)) -#define ADC_TWOSAMPLINGDELAY_16CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_1 | ADC_CCR_DELAY_0)) -#define ADC_TWOSAMPLINGDELAY_17CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2)) -#define ADC_TWOSAMPLINGDELAY_18CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_0)) -#define ADC_TWOSAMPLINGDELAY_19CYCLES ((uint32_t)(ADC_CCR_DELAY_3 | ADC_CCR_DELAY_2 | ADC_CCR_DELAY_1)) -#define ADC_TWOSAMPLINGDELAY_20CYCLES ((uint32_t)ADC_CCR_DELAY) -/** - * @} - */ - -/** @defgroup ADC_Resolution ADC Resolution - * @{ - */ -#define ADC_RESOLUTION_12B ((uint32_t)0x00000000) -#define ADC_RESOLUTION_10B ((uint32_t)ADC_CR1_RES_0) -#define ADC_RESOLUTION_8B ((uint32_t)ADC_CR1_RES_1) -#define ADC_RESOLUTION_6B ((uint32_t)ADC_CR1_RES) -/** - * @} - */ - -/** @defgroup ADC_External_trigger_edge_Regular ADC External Trigger Edge Regular - * @{ - */ -#define ADC_EXTERNALTRIGCONVEDGE_NONE ((uint32_t)0x00000000) -#define ADC_EXTERNALTRIGCONVEDGE_RISING ((uint32_t)ADC_CR2_EXTEN_0) -#define ADC_EXTERNALTRIGCONVEDGE_FALLING ((uint32_t)ADC_CR2_EXTEN_1) -#define ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_EXTEN) -/** - * @} - */ - -/** @defgroup ADC_External_trigger_Source_Regular ADC External Trigger Source Regular - * @{ - */ -/* Note: Parameter ADC_SOFTWARE_START is a software parameter used for */ -/* compatibility with other STM32 devices. */ -#define ADC_EXTERNALTRIGCONV_T1_CC1 ((uint32_t)0x00000000) -#define ADC_EXTERNALTRIGCONV_T1_CC2 ((uint32_t)ADC_CR2_EXTSEL_0) -#define ADC_EXTERNALTRIGCONV_T1_CC3 ((uint32_t)ADC_CR2_EXTSEL_1) -#define ADC_EXTERNALTRIGCONV_T2_CC2 ((uint32_t)(ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0)) -#define ADC_EXTERNALTRIGCONV_T2_CC3 ((uint32_t)ADC_CR2_EXTSEL_2) -#define ADC_EXTERNALTRIGCONV_T2_CC4 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0)) -#define ADC_EXTERNALTRIGCONV_T2_TRGO ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1)) -#define ADC_EXTERNALTRIGCONV_T3_CC1 ((uint32_t)(ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0)) -#define ADC_EXTERNALTRIGCONV_T3_TRGO ((uint32_t)ADC_CR2_EXTSEL_3) -#define ADC_EXTERNALTRIGCONV_T4_CC4 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_0)) -#define ADC_EXTERNALTRIGCONV_T5_CC1 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1)) -#define ADC_EXTERNALTRIGCONV_T5_CC2 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_1 | ADC_CR2_EXTSEL_0)) -#define ADC_EXTERNALTRIGCONV_T5_CC3 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2)) -#define ADC_EXTERNALTRIGCONV_T8_CC1 ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_0)) -#define ADC_EXTERNALTRIGCONV_T8_TRGO ((uint32_t)(ADC_CR2_EXTSEL_3 | ADC_CR2_EXTSEL_2 | ADC_CR2_EXTSEL_1)) -#define ADC_EXTERNALTRIGCONV_Ext_IT11 ((uint32_t)ADC_CR2_EXTSEL) -#define ADC_SOFTWARE_START ((uint32_t)ADC_CR2_EXTSEL + 1) -/** - * @} - */ - -/** @defgroup ADC_data_align ADC Data Align - * @{ - */ -#define ADC_DATAALIGN_RIGHT ((uint32_t)0x00000000) -#define ADC_DATAALIGN_LEFT ((uint32_t)ADC_CR2_ALIGN) -/** - * @} - */ - -/** @defgroup ADC_channels ADC Common Channels - * @{ - */ -#define ADC_CHANNEL_0 ((uint32_t)0x00000000) -#define ADC_CHANNEL_1 ((uint32_t)ADC_CR1_AWDCH_0) -#define ADC_CHANNEL_2 ((uint32_t)ADC_CR1_AWDCH_1) -#define ADC_CHANNEL_3 ((uint32_t)(ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0)) -#define ADC_CHANNEL_4 ((uint32_t)ADC_CR1_AWDCH_2) -#define ADC_CHANNEL_5 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0)) -#define ADC_CHANNEL_6 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1)) -#define ADC_CHANNEL_7 ((uint32_t)(ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0)) -#define ADC_CHANNEL_8 ((uint32_t)ADC_CR1_AWDCH_3) -#define ADC_CHANNEL_9 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_0)) -#define ADC_CHANNEL_10 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1)) -#define ADC_CHANNEL_11 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0)) -#define ADC_CHANNEL_12 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2)) -#define ADC_CHANNEL_13 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_0)) -#define ADC_CHANNEL_14 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1)) -#define ADC_CHANNEL_15 ((uint32_t)(ADC_CR1_AWDCH_3 | ADC_CR1_AWDCH_2 | ADC_CR1_AWDCH_1 | ADC_CR1_AWDCH_0)) -#define ADC_CHANNEL_16 ((uint32_t)ADC_CR1_AWDCH_4) -#define ADC_CHANNEL_17 ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_0)) -#define ADC_CHANNEL_18 ((uint32_t)(ADC_CR1_AWDCH_4 | ADC_CR1_AWDCH_1)) - -#define ADC_CHANNEL_VREFINT ((uint32_t)ADC_CHANNEL_17) -#define ADC_CHANNEL_VBAT ((uint32_t)ADC_CHANNEL_18) -/** - * @} - */ - -/** @defgroup ADC_sampling_times ADC Sampling Times - * @{ - */ -#define ADC_SAMPLETIME_3CYCLES ((uint32_t)0x00000000) -#define ADC_SAMPLETIME_15CYCLES ((uint32_t)ADC_SMPR1_SMP10_0) -#define ADC_SAMPLETIME_28CYCLES ((uint32_t)ADC_SMPR1_SMP10_1) -#define ADC_SAMPLETIME_56CYCLES ((uint32_t)(ADC_SMPR1_SMP10_1 | ADC_SMPR1_SMP10_0)) -#define ADC_SAMPLETIME_84CYCLES ((uint32_t)ADC_SMPR1_SMP10_2) -#define ADC_SAMPLETIME_112CYCLES ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_0)) -#define ADC_SAMPLETIME_144CYCLES ((uint32_t)(ADC_SMPR1_SMP10_2 | ADC_SMPR1_SMP10_1)) -#define ADC_SAMPLETIME_480CYCLES ((uint32_t)ADC_SMPR1_SMP10) -/** - * @} - */ - - /** @defgroup ADC_EOCSelection ADC EOC Selection - * @{ - */ -#define ADC_EOC_SEQ_CONV ((uint32_t)0x00000000) -#define ADC_EOC_SINGLE_CONV ((uint32_t)0x00000001) -#define ADC_EOC_SINGLE_SEQ_CONV ((uint32_t)0x00000002) /*!< reserved for future use */ -/** - * @} - */ - -/** @defgroup ADC_Event_type ADC Event Type - * @{ - */ -#define ADC_AWD_EVENT ((uint32_t)ADC_FLAG_AWD) -#define ADC_OVR_EVENT ((uint32_t)ADC_FLAG_OVR) -/** - * @} - */ - -/** @defgroup ADC_analog_watchdog_selection ADC Analog Watchdog Selection - * @{ - */ -#define ADC_ANALOGWATCHDOG_SINGLE_REG ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN)) -#define ADC_ANALOGWATCHDOG_SINGLE_INJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_JAWDEN)) -#define ADC_ANALOGWATCHDOG_SINGLE_REGINJEC ((uint32_t)(ADC_CR1_AWDSGL | ADC_CR1_AWDEN | ADC_CR1_JAWDEN)) -#define ADC_ANALOGWATCHDOG_ALL_REG ((uint32_t)ADC_CR1_AWDEN) -#define ADC_ANALOGWATCHDOG_ALL_INJEC ((uint32_t)ADC_CR1_JAWDEN) -#define ADC_ANALOGWATCHDOG_ALL_REGINJEC ((uint32_t)(ADC_CR1_AWDEN | ADC_CR1_JAWDEN)) -#define ADC_ANALOGWATCHDOG_NONE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup ADC_interrupts_definition ADC Interrupts Definition - * @{ - */ -#define ADC_IT_EOC ((uint32_t)ADC_CR1_EOCIE) -#define ADC_IT_AWD ((uint32_t)ADC_CR1_AWDIE) -#define ADC_IT_JEOC ((uint32_t)ADC_CR1_JEOCIE) -#define ADC_IT_OVR ((uint32_t)ADC_CR1_OVRIE) -/** - * @} - */ - -/** @defgroup ADC_flags_definition ADC Flags Definition - * @{ - */ -#define ADC_FLAG_AWD ((uint32_t)ADC_SR_AWD) -#define ADC_FLAG_EOC ((uint32_t)ADC_SR_EOC) -#define ADC_FLAG_JEOC ((uint32_t)ADC_SR_JEOC) -#define ADC_FLAG_JSTRT ((uint32_t)ADC_SR_JSTRT) -#define ADC_FLAG_STRT ((uint32_t)ADC_SR_STRT) -#define ADC_FLAG_OVR ((uint32_t)ADC_SR_OVR) -/** - * @} - */ - -/** @defgroup ADC_channels_type ADC Channels Type - * @{ - */ -#define ADC_ALL_CHANNELS ((uint32_t)0x00000001) -#define ADC_REGULAR_CHANNELS ((uint32_t)0x00000002) /*!< reserved for future use */ -#define ADC_INJECTED_CHANNELS ((uint32_t)0x00000003) /*!< reserved for future use */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup ADC_Exported_Macros ADC Exported Macros - * @{ - */ - -/** @brief Reset ADC handle state - * @param __HANDLE__: ADC handle - * @retval None - */ -#define __HAL_ADC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ADC_STATE_RESET) - -/** - * @brief Enable the ADC peripheral. - * @param __HANDLE__: ADC handle - * @retval None - */ -#define __HAL_ADC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 |= ADC_CR2_ADON) - -/** - * @brief Disable the ADC peripheral. - * @param __HANDLE__: ADC handle - * @retval None - */ -#define __HAL_ADC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= ~ADC_CR2_ADON) - -/** - * @brief Enable the ADC end of conversion interrupt. - * @param __HANDLE__: specifies the ADC Handle. - * @param __INTERRUPT__: ADC Interrupt. - * @retval None - */ -#define __HAL_ADC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) |= (__INTERRUPT__)) - -/** - * @brief Disable the ADC end of conversion interrupt. - * @param __HANDLE__: specifies the ADC Handle. - * @param __INTERRUPT__: ADC interrupt. - * @retval None - */ -#define __HAL_ADC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1) &= ~(__INTERRUPT__)) - -/** @brief Check if the specified ADC interrupt source is enabled or disabled. - * @param __HANDLE__: specifies the ADC Handle. - * @param __INTERRUPT__: specifies the ADC interrupt source to check. - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_ADC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) - -/** - * @brief Clear the ADC's pending flags. - * @param __HANDLE__: specifies the ADC Handle. - * @param __FLAG__: ADC flag. - * @retval None - */ -#define __HAL_ADC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__)) - -/** - * @brief Get the selected ADC's flag status. - * @param __HANDLE__: specifies the ADC Handle. - * @param __FLAG__: ADC flag. - * @retval None - */ -#define __HAL_ADC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) - -/** - * @} - */ - -/* Include ADC HAL Extension module */ -#include "stm32f4xx_hal_adc_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup ADC_Exported_Functions - * @{ - */ - -/** @addtogroup ADC_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions ***********************************/ -HAL_StatusTypeDef HAL_ADC_Init(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADC_DeInit(ADC_HandleTypeDef *hadc); -void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc); -void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc); -/** - * @} - */ - -/** @addtogroup ADC_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions ******************************************************/ -HAL_StatusTypeDef HAL_ADC_Start(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADC_Stop(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADC_PollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout); - -HAL_StatusTypeDef HAL_ADC_PollForEvent(ADC_HandleTypeDef* hadc, uint32_t EventType, uint32_t Timeout); - -HAL_StatusTypeDef HAL_ADC_Start_IT(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADC_Stop_IT(ADC_HandleTypeDef* hadc); - -void HAL_ADC_IRQHandler(ADC_HandleTypeDef* hadc); - -HAL_StatusTypeDef HAL_ADC_Start_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length); -HAL_StatusTypeDef HAL_ADC_Stop_DMA(ADC_HandleTypeDef* hadc); - -uint32_t HAL_ADC_GetValue(ADC_HandleTypeDef* hadc); - -void HAL_ADC_ConvCpltCallback(ADC_HandleTypeDef* hadc); -void HAL_ADC_ConvHalfCpltCallback(ADC_HandleTypeDef* hadc); -void HAL_ADC_LevelOutOfWindowCallback(ADC_HandleTypeDef* hadc); -void HAL_ADC_ErrorCallback(ADC_HandleTypeDef *hadc); -/** - * @} - */ - -/** @addtogroup ADC_Exported_Functions_Group3 - * @{ - */ -/* Peripheral Control functions *************************************************/ -HAL_StatusTypeDef HAL_ADC_ConfigChannel(ADC_HandleTypeDef* hadc, ADC_ChannelConfTypeDef* sConfig); -HAL_StatusTypeDef HAL_ADC_AnalogWDGConfig(ADC_HandleTypeDef* hadc, ADC_AnalogWDGConfTypeDef* AnalogWDGConfig); -/** - * @} - */ - -/** @addtogroup ADC_Exported_Functions_Group4 - * @{ - */ -/* Peripheral State functions ***************************************************/ -HAL_ADC_StateTypeDef HAL_ADC_GetState(ADC_HandleTypeDef* hadc); -uint32_t HAL_ADC_GetError(ADC_HandleTypeDef *hadc); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup ADC_Private_Constants ADC Private Constants - * @{ - */ -/* Delay for ADC stabilization time. */ -/* Maximum delay is 1us (refer to device datasheet, parameter tSTAB). */ -/* Unit: us */ -#define ADC_STAB_DELAY_US ((uint32_t) 3) -/* Delay for temperature sensor stabilization time. */ -/* Maximum delay is 10us (refer to device datasheet, parameter tSTART). */ -/* Unit: us */ -#define ADC_TEMPSENSOR_DELAY_US ((uint32_t) 10) -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup ADC_Private_Macros ADC Private Macros - * @{ - */ -#define IS_ADC_CLOCKPRESCALER(ADC_CLOCK) (((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV2) || \ - ((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV4) || \ - ((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV6) || \ - ((ADC_CLOCK) == ADC_CLOCKPRESCALER_PCLK_DIV8)) -#define IS_ADC_SAMPLING_DELAY(DELAY) (((DELAY) == ADC_TWOSAMPLINGDELAY_5CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_6CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_7CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_8CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_9CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_10CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_11CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_12CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_13CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_14CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_15CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_16CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_17CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_18CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_19CYCLES) || \ - ((DELAY) == ADC_TWOSAMPLINGDELAY_20CYCLES)) -#define IS_ADC_RESOLUTION(RESOLUTION) (((RESOLUTION) == ADC_RESOLUTION_12B) || \ - ((RESOLUTION) == ADC_RESOLUTION_10B) || \ - ((RESOLUTION) == ADC_RESOLUTION_8B) || \ - ((RESOLUTION) == ADC_RESOLUTION_6B)) -#define IS_ADC_EXT_TRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGCONVEDGE_NONE) || \ - ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISING) || \ - ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_FALLING) || \ - ((EDGE) == ADC_EXTERNALTRIGCONVEDGE_RISINGFALLING)) -#define IS_ADC_EXT_TRIG(REGTRIG) (((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC1) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC2) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T1_CC3) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC2) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC3) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_CC4) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T2_TRGO) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_CC1) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T3_TRGO) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T4_CC4) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC1) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC2) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T5_CC3) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_CC1) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_T8_TRGO) || \ - ((REGTRIG) == ADC_EXTERNALTRIGCONV_Ext_IT11)|| \ - ((REGTRIG) == ADC_SOFTWARE_START)) -#define IS_ADC_DATA_ALIGN(ALIGN) (((ALIGN) == ADC_DATAALIGN_RIGHT) || \ - ((ALIGN) == ADC_DATAALIGN_LEFT)) -#define IS_ADC_SAMPLE_TIME(TIME) (((TIME) == ADC_SAMPLETIME_3CYCLES) || \ - ((TIME) == ADC_SAMPLETIME_15CYCLES) || \ - ((TIME) == ADC_SAMPLETIME_28CYCLES) || \ - ((TIME) == ADC_SAMPLETIME_56CYCLES) || \ - ((TIME) == ADC_SAMPLETIME_84CYCLES) || \ - ((TIME) == ADC_SAMPLETIME_112CYCLES) || \ - ((TIME) == ADC_SAMPLETIME_144CYCLES) || \ - ((TIME) == ADC_SAMPLETIME_480CYCLES)) -#define IS_ADC_EOCSelection(EOCSelection) (((EOCSelection) == ADC_EOC_SINGLE_CONV) || \ - ((EOCSelection) == ADC_EOC_SEQ_CONV) || \ - ((EOCSelection) == ADC_EOC_SINGLE_SEQ_CONV)) -#define IS_ADC_EVENT_TYPE(EVENT) (((EVENT) == ADC_AWD_EVENT) || \ - ((EVENT) == ADC_OVR_EVENT)) -#define IS_ADC_ANALOG_WATCHDOG(WATCHDOG) (((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REG) || \ - ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_INJEC) || \ - ((WATCHDOG) == ADC_ANALOGWATCHDOG_SINGLE_REGINJEC) || \ - ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REG) || \ - ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_INJEC) || \ - ((WATCHDOG) == ADC_ANALOGWATCHDOG_ALL_REGINJEC) || \ - ((WATCHDOG) == ADC_ANALOGWATCHDOG_NONE)) -#define IS_ADC_CHANNELS_TYPE(CHANNEL_TYPE) (((CHANNEL_TYPE) == ADC_ALL_CHANNELS) || \ - ((CHANNEL_TYPE) == ADC_REGULAR_CHANNELS) || \ - ((CHANNEL_TYPE) == ADC_INJECTED_CHANNELS)) -#define IS_ADC_THRESHOLD(THRESHOLD) ((THRESHOLD) <= ((uint32_t)0xFFF)) - -#define IS_ADC_REGULAR_LENGTH(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)16))) -#define IS_ADC_REGULAR_RANK(RANK) (((RANK) >= ((uint32_t)1)) && ((RANK) <= ((uint32_t)16))) -#define IS_ADC_REGULAR_DISC_NUMBER(NUMBER) (((NUMBER) >= ((uint32_t)1)) && ((NUMBER) <= ((uint32_t)8))) -#define IS_ADC_RANGE(RESOLUTION, ADC_VALUE) \ - ((((RESOLUTION) == ADC_RESOLUTION_12B) && ((ADC_VALUE) <= ((uint32_t)0x0FFF))) || \ - (((RESOLUTION) == ADC_RESOLUTION_10B) && ((ADC_VALUE) <= ((uint32_t)0x03FF))) || \ - (((RESOLUTION) == ADC_RESOLUTION_8B) && ((ADC_VALUE) <= ((uint32_t)0x00FF))) || \ - (((RESOLUTION) == ADC_RESOLUTION_6B) && ((ADC_VALUE) <= ((uint32_t)0x003F)))) - -/** - * @brief Set ADC Regular channel sequence length. - * @param _NbrOfConversion_: Regular channel sequence length. - * @retval None - */ -#define ADC_SQR1(_NbrOfConversion_) (((_NbrOfConversion_) - (uint8_t)1) << 20) - -/** - * @brief Set the ADC's sample time for channel numbers between 10 and 18. - * @param _SAMPLETIME_: Sample time parameter. - * @param _CHANNELNB_: Channel number. - * @retval None - */ -#define ADC_SMPR1(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * (((uint32_t)((uint16_t)(_CHANNELNB_))) - 10))) - -/** - * @brief Set the ADC's sample time for channel numbers between 0 and 9. - * @param _SAMPLETIME_: Sample time parameter. - * @param _CHANNELNB_: Channel number. - * @retval None - */ -#define ADC_SMPR2(_SAMPLETIME_, _CHANNELNB_) ((_SAMPLETIME_) << (3 * ((uint32_t)((uint16_t)(_CHANNELNB_))))) - -/** - * @brief Set the selected regular channel rank for rank between 1 and 6. - * @param _CHANNELNB_: Channel number. - * @param _RANKNB_: Rank number. - * @retval None - */ -#define ADC_SQR3_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * ((_RANKNB_) - 1))) - -/** - * @brief Set the selected regular channel rank for rank between 7 and 12. - * @param _CHANNELNB_: Channel number. - * @param _RANKNB_: Rank number. - * @retval None - */ -#define ADC_SQR2_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * ((_RANKNB_) - 7))) - -/** - * @brief Set the selected regular channel rank for rank between 13 and 16. - * @param _CHANNELNB_: Channel number. - * @param _RANKNB_: Rank number. - * @retval None - */ -#define ADC_SQR1_RK(_CHANNELNB_, _RANKNB_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * ((_RANKNB_) - 13))) - -/** - * @brief Enable ADC continuous conversion mode. - * @param _CONTINUOUS_MODE_: Continuous mode. - * @retval None - */ -#define ADC_CR2_CONTINUOUS(_CONTINUOUS_MODE_) ((_CONTINUOUS_MODE_) << 1) - -/** - * @brief Configures the number of discontinuous conversions for the regular group channels. - * @param _NBR_DISCONTINUOUSCONV_: Number of discontinuous conversions. - * @retval None - */ -#define ADC_CR1_DISCONTINUOUS(_NBR_DISCONTINUOUSCONV_) (((_NBR_DISCONTINUOUSCONV_) - 1) << POSITION_VAL(ADC_CR1_DISCNUM)) - -/** - * @brief Enable ADC scan mode. - * @param _SCANCONV_MODE_: Scan conversion mode. - * @retval None - */ -#define ADC_CR1_SCANCONV(_SCANCONV_MODE_) ((_SCANCONV_MODE_) << 8) - -/** - * @brief Enable the ADC end of conversion selection. - * @param _EOCSelection_MODE_: End of conversion selection mode. - * @retval None - */ -#define ADC_CR2_EOCSelection(_EOCSelection_MODE_) ((_EOCSelection_MODE_) << 10) - -/** - * @brief Enable the ADC DMA continuous request. - * @param _DMAContReq_MODE_: DMA continuous request mode. - * @retval None - */ -#define ADC_CR2_DMAContReq(_DMAContReq_MODE_) ((_DMAContReq_MODE_) << 9) - -/** - * @brief Return resolution bits in CR1 register. - * @param __HANDLE__: ADC handle - * @retval None - */ -#define ADC_GET_RESOLUTION(__HANDLE__) (((__HANDLE__)->Instance->CR1) & ADC_CR1_RES) - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup ADC_Private_Functions ADC Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F4xx_ADC_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc_ex.h deleted file mode 100644 index 2c05c97..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_adc_ex.h +++ /dev/null @@ -1,352 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_adc_ex.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of ADC HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_ADC_EX_H -#define __STM32F4xx_ADC_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup ADCEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup ADCEx_Exported_Types ADC Exported Types - * @{ - */ - -/** - * @brief ADC Configuration injected Channel structure definition - */ -typedef struct -{ - uint32_t InjectedChannel; /*!< Configure the ADC injected channel. - This parameter can be a value of @ref ADC_channels */ - uint32_t InjectedRank; /*!< The rank in the injected group sequencer - This parameter must be a number between Min_Data = 1 and Max_Data = 4. */ - uint32_t InjectedSamplingTime; /*!< The sample time value to be set for the selected channel. - This parameter can be a value of @ref ADC_sampling_times */ - uint32_t InjectedOffset; /*!< Defines the offset to be subtracted from the raw converted data when convert injected channels. - This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */ - uint32_t InjectedNbrOfConversion; /*!< Specifies the number of ADC conversions that will be done using the sequencer for - injected channel group. - This parameter must be a number between Min_Data = 1 and Max_Data = 4. */ - uint32_t AutoInjectedConv; /*!< Enables or disables the selected ADC automatic injected group - conversion after regular one */ - uint32_t InjectedDiscontinuousConvMode; /*!< Specifies whether the conversion is performed in Discontinuous mode or not for injected channels. - This parameter can be set to ENABLE or DISABLE. */ - uint32_t ExternalTrigInjecConvEdge; /*!< Select the external trigger edge and enable the trigger of an injected channels. - This parameter can be a value of @ref ADCEx_External_trigger_edge_Injected */ - uint32_t ExternalTrigInjecConv; /*!< Select the external event used to trigger the start of conversion of a injected channels. - This parameter can be a value of @ref ADCEx_External_trigger_Source_Injected */ -}ADC_InjectionConfTypeDef; - -/** - * @brief ADC Configuration multi-mode structure definition - */ -typedef struct -{ - uint32_t Mode; /*!< Configures the ADC to operate in independent or multi mode. - This parameter can be a value of @ref ADCEx_Common_mode */ - uint32_t DMAAccessMode; /*!< Configures the Direct memory access mode for multi ADC mode. - This parameter can be a value of @ref ADCEx_Direct_memory_access_mode_for_multi_mode */ - uint32_t TwoSamplingDelay; /*!< Configures the Delay between 2 sampling phases. - This parameter can be a value of @ref ADC_delay_between_2_sampling_phases */ -}ADC_MultiModeTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup ADCEx_Exported_Constants ADC Exported Constants - * @{ - */ - -/** @defgroup ADCEx_Common_mode ADC Common Mode - * @{ - */ -#define ADC_MODE_INDEPENDENT ((uint32_t)0x00000000) -#define ADC_DUALMODE_REGSIMULT_INJECSIMULT ((uint32_t)ADC_CCR_MULTI_0) -#define ADC_DUALMODE_REGSIMULT_ALTERTRIG ((uint32_t)ADC_CCR_MULTI_1) -#define ADC_DUALMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0)) -#define ADC_DUALMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1)) -#define ADC_DUALMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0)) -#define ADC_DUALMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0)) -#define ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_0)) -#define ADC_TRIPLEMODE_REGSIMULT_AlterTrig ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_1)) -#define ADC_TRIPLEMODE_INJECSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_0)) -#define ADC_TRIPLEMODE_REGSIMULT ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1)) -#define ADC_TRIPLEMODE_INTERL ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_2 | ADC_CCR_MULTI_1 | ADC_CCR_MULTI_0)) -#define ADC_TRIPLEMODE_ALTERTRIG ((uint32_t)(ADC_CCR_MULTI_4 | ADC_CCR_MULTI_3 | ADC_CCR_MULTI_0)) -/** - * @} - */ - -/** @defgroup ADCEx_Direct_memory_access_mode_for_multi_mode ADC Direct Memory Access Mode For Multi Mode - * @{ - */ -#define ADC_DMAACCESSMODE_DISABLED ((uint32_t)0x00000000) /*!< DMA mode disabled */ -#define ADC_DMAACCESSMODE_1 ((uint32_t)ADC_CCR_DMA_0) /*!< DMA mode 1 enabled (2 / 3 half-words one by one - 1 then 2 then 3)*/ -#define ADC_DMAACCESSMODE_2 ((uint32_t)ADC_CCR_DMA_1) /*!< DMA mode 2 enabled (2 / 3 half-words by pairs - 2&1 then 1&3 then 3&2)*/ -#define ADC_DMAACCESSMODE_3 ((uint32_t)ADC_CCR_DMA) /*!< DMA mode 3 enabled (2 / 3 bytes by pairs - 2&1 then 1&3 then 3&2) */ -/** - * @} - */ - -/** @defgroup ADCEx_External_trigger_edge_Injected ADC External Trigger Edge Injected - * @{ - */ -#define ADC_EXTERNALTRIGINJECCONVEDGE_NONE ((uint32_t)0x00000000) -#define ADC_EXTERNALTRIGINJECCONVEDGE_RISING ((uint32_t)ADC_CR2_JEXTEN_0) -#define ADC_EXTERNALTRIGINJECCONVEDGE_FALLING ((uint32_t)ADC_CR2_JEXTEN_1) -#define ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING ((uint32_t)ADC_CR2_JEXTEN) -/** - * @} - */ - -/** @defgroup ADCEx_External_trigger_Source_Injected ADC External Trigger Source Injected - * @{ - */ -#define ADC_EXTERNALTRIGINJECCONV_T1_CC4 ((uint32_t)0x00000000) -#define ADC_EXTERNALTRIGINJECCONV_T1_TRGO ((uint32_t)ADC_CR2_JEXTSEL_0) -#define ADC_EXTERNALTRIGINJECCONV_T2_CC1 ((uint32_t)ADC_CR2_JEXTSEL_1) -#define ADC_EXTERNALTRIGINJECCONV_T2_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0)) -#define ADC_EXTERNALTRIGINJECCONV_T3_CC2 ((uint32_t)ADC_CR2_JEXTSEL_2) -#define ADC_EXTERNALTRIGINJECCONV_T3_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0)) -#define ADC_EXTERNALTRIGINJECCONV_T4_CC1 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1)) -#define ADC_EXTERNALTRIGINJECCONV_T4_CC2 ((uint32_t)(ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0)) -#define ADC_EXTERNALTRIGINJECCONV_T4_CC3 ((uint32_t)ADC_CR2_JEXTSEL_3) -#define ADC_EXTERNALTRIGINJECCONV_T4_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_0)) -#define ADC_EXTERNALTRIGINJECCONV_T5_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1)) -#define ADC_EXTERNALTRIGINJECCONV_T5_TRGO ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_1 | ADC_CR2_JEXTSEL_0)) -#define ADC_EXTERNALTRIGINJECCONV_T8_CC2 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2)) -#define ADC_EXTERNALTRIGINJECCONV_T8_CC3 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_0)) -#define ADC_EXTERNALTRIGINJECCONV_T8_CC4 ((uint32_t)(ADC_CR2_JEXTSEL_3 | ADC_CR2_JEXTSEL_2 | ADC_CR2_JEXTSEL_1)) -#define ADC_EXTERNALTRIGINJECCONV_EXT_IT15 ((uint32_t)ADC_CR2_JEXTSEL) -#define ADC_INJECTED_SOFTWARE_START ((uint32_t)ADC_CR2_JEXTSEL + 1) -/** - * @} - */ - -/** @defgroup ADCEx_injected_channel_selection ADC Injected Channel Selection - * @{ - */ -#define ADC_INJECTED_RANK_1 ((uint32_t)0x00000001) -#define ADC_INJECTED_RANK_2 ((uint32_t)0x00000002) -#define ADC_INJECTED_RANK_3 ((uint32_t)0x00000003) -#define ADC_INJECTED_RANK_4 ((uint32_t)0x00000004) -/** - * @} - */ - -/** @defgroup ADCEx_channels ADC Specific Channels - * @{ - */ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -#define ADC_CHANNEL_TEMPSENSOR ((uint32_t)ADC_CHANNEL_16) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) -#define ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT ((uint32_t)0x10000000) /* Dummy bit for driver internal usage, not used in ADC channel setting registers CR1 or SQRx */ -#define ADC_CHANNEL_TEMPSENSOR ((uint32_t)ADC_CHANNEL_18 | ADC_CHANNEL_DIFFERENCIATION_TEMPSENSOR_VBAT) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */ -/** - * @} - */ - - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup ADC_Exported_Macros ADC Exported Macros - * @{ - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup ADCEx_Exported_Functions - * @{ - */ - -/** @addtogroup ADCEx_Exported_Functions_Group1 - * @{ - */ - -/* I/O operation functions ******************************************************/ -HAL_StatusTypeDef HAL_ADCEx_InjectedStart(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADCEx_InjectedStop(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADCEx_InjectedPollForConversion(ADC_HandleTypeDef* hadc, uint32_t Timeout); -HAL_StatusTypeDef HAL_ADCEx_InjectedStart_IT(ADC_HandleTypeDef* hadc); -HAL_StatusTypeDef HAL_ADCEx_InjectedStop_IT(ADC_HandleTypeDef* hadc); -uint32_t HAL_ADCEx_InjectedGetValue(ADC_HandleTypeDef* hadc, uint32_t InjectedRank); -HAL_StatusTypeDef HAL_ADCEx_MultiModeStart_DMA(ADC_HandleTypeDef* hadc, uint32_t* pData, uint32_t Length); -HAL_StatusTypeDef HAL_ADCEx_MultiModeStop_DMA(ADC_HandleTypeDef* hadc); -uint32_t HAL_ADCEx_MultiModeGetValue(ADC_HandleTypeDef* hadc); -void HAL_ADCEx_InjectedConvCpltCallback(ADC_HandleTypeDef* hadc); - -/* Peripheral Control functions *************************************************/ -HAL_StatusTypeDef HAL_ADCEx_InjectedConfigChannel(ADC_HandleTypeDef* hadc,ADC_InjectionConfTypeDef* sConfigInjected); -HAL_StatusTypeDef HAL_ADCEx_MultiModeConfigChannel(ADC_HandleTypeDef* hadc, ADC_MultiModeTypeDef* multimode); - -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup ADCEx_Private_Constants ADC Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup ADCEx_Private_Macros ADC Private Macros - * @{ - */ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -#define IS_ADC_CHANNEL(CHANNEL) ((CHANNEL) <= ADC_CHANNEL_18) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) -#define IS_ADC_CHANNEL(CHANNEL) (((CHANNEL) <= ADC_CHANNEL_18) || \ - ((CHANNEL) == ADC_CHANNEL_TEMPSENSOR)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */ - -#define IS_ADC_MODE(MODE) (((MODE) == ADC_MODE_INDEPENDENT) || \ - ((MODE) == ADC_DUALMODE_REGSIMULT_INJECSIMULT) || \ - ((MODE) == ADC_DUALMODE_REGSIMULT_ALTERTRIG) || \ - ((MODE) == ADC_DUALMODE_INJECSIMULT) || \ - ((MODE) == ADC_DUALMODE_REGSIMULT) || \ - ((MODE) == ADC_DUALMODE_INTERL) || \ - ((MODE) == ADC_DUALMODE_ALTERTRIG) || \ - ((MODE) == ADC_TRIPLEMODE_REGSIMULT_INJECSIMULT) || \ - ((MODE) == ADC_TRIPLEMODE_REGSIMULT_AlterTrig) || \ - ((MODE) == ADC_TRIPLEMODE_INJECSIMULT) || \ - ((MODE) == ADC_TRIPLEMODE_REGSIMULT) || \ - ((MODE) == ADC_TRIPLEMODE_INTERL) || \ - ((MODE) == ADC_TRIPLEMODE_ALTERTRIG)) -#define IS_ADC_DMA_ACCESS_MODE(MODE) (((MODE) == ADC_DMAACCESSMODE_DISABLED) || \ - ((MODE) == ADC_DMAACCESSMODE_1) || \ - ((MODE) == ADC_DMAACCESSMODE_2) || \ - ((MODE) == ADC_DMAACCESSMODE_3)) -#define IS_ADC_EXT_INJEC_TRIG_EDGE(EDGE) (((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_NONE) || \ - ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISING) || \ - ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_FALLING) || \ - ((EDGE) == ADC_EXTERNALTRIGINJECCONVEDGE_RISINGFALLING)) -#define IS_ADC_EXT_INJEC_TRIG(INJTRIG) (((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_CC4) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T1_TRGO) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_CC1) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T2_TRGO) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC2) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T3_CC4) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC1) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC2) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_CC3) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T4_TRGO) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_CC4) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T5_TRGO) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC2) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC3) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_T8_CC4) || \ - ((INJTRIG) == ADC_EXTERNALTRIGINJECCONV_EXT_IT15)|| \ - ((INJTRIG) == ADC_INJECTED_SOFTWARE_START)) -#define IS_ADC_INJECTED_LENGTH(LENGTH) (((LENGTH) >= ((uint32_t)1)) && ((LENGTH) <= ((uint32_t)4))) -#define IS_ADC_INJECTED_RANK(RANK) (((RANK) >= ((uint32_t)1)) && ((RANK) <= ((uint32_t)4))) - -/** - * @brief Set the selected injected Channel rank. - * @param _CHANNELNB_: Channel number. - * @param _RANKNB_: Rank number. - * @param _JSQR_JL_: Sequence length. - * @retval None - */ -#define ADC_JSQR(_CHANNELNB_, _RANKNB_, _JSQR_JL_) (((uint32_t)((uint16_t)(_CHANNELNB_))) << (5 * (uint8_t)(((_RANKNB_) + 3) - (_JSQR_JL_)))) - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup ADCEx_Private_Functions ADC Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F4xx_ADC_EX_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_can.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_can.h deleted file mode 100644 index 48e847c..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_can.h +++ /dev/null @@ -1,775 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_can.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of CAN HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CAN_H -#define __STM32F4xx_HAL_CAN_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup CAN - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup CAN_Exported_Types CAN Exported Types - * @{ - */ - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_CAN_STATE_RESET = 0x00, /*!< CAN not yet initialized or disabled */ - HAL_CAN_STATE_READY = 0x01, /*!< CAN initialized and ready for use */ - HAL_CAN_STATE_BUSY = 0x02, /*!< CAN process is ongoing */ - HAL_CAN_STATE_BUSY_TX = 0x12, /*!< CAN process is ongoing */ - HAL_CAN_STATE_BUSY_RX = 0x22, /*!< CAN process is ongoing */ - HAL_CAN_STATE_BUSY_TX_RX = 0x32, /*!< CAN process is ongoing */ - HAL_CAN_STATE_TIMEOUT = 0x03, /*!< Timeout state */ - HAL_CAN_STATE_ERROR = 0x04 /*!< CAN error state */ - -}HAL_CAN_StateTypeDef; - -/** - * @brief CAN init structure definition - */ -typedef struct -{ - uint32_t Prescaler; /*!< Specifies the length of a time quantum. - This parameter must be a number between Min_Data = 1 and Max_Data = 1024 */ - - uint32_t Mode; /*!< Specifies the CAN operating mode. - This parameter can be a value of @ref CAN_operating_mode */ - - uint32_t SJW; /*!< Specifies the maximum number of time quanta - the CAN hardware is allowed to lengthen or - shorten a bit to perform resynchronization. - This parameter can be a value of @ref CAN_synchronisation_jump_width */ - - uint32_t BS1; /*!< Specifies the number of time quanta in Bit Segment 1. - This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_1 */ - - uint32_t BS2; /*!< Specifies the number of time quanta in Bit Segment 2. - This parameter can be a value of @ref CAN_time_quantum_in_bit_segment_2 */ - - uint32_t TTCM; /*!< Enable or disable the time triggered communication mode. - This parameter can be set to ENABLE or DISABLE. */ - - uint32_t ABOM; /*!< Enable or disable the automatic bus-off management. - This parameter can be set to ENABLE or DISABLE */ - - uint32_t AWUM; /*!< Enable or disable the automatic wake-up mode. - This parameter can be set to ENABLE or DISABLE */ - - uint32_t NART; /*!< Enable or disable the non-automatic retransmission mode. - This parameter can be set to ENABLE or DISABLE */ - - uint32_t RFLM; /*!< Enable or disable the receive FIFO Locked mode. - This parameter can be set to ENABLE or DISABLE */ - - uint32_t TXFP; /*!< Enable or disable the transmit FIFO priority. - This parameter can be set to ENABLE or DISABLE */ -}CAN_InitTypeDef; - -/** - * @brief CAN filter configuration structure definition - */ -typedef struct -{ - uint32_t FilterIdHigh; /*!< Specifies the filter identification number (MSBs for a 32-bit - configuration, first one for a 16-bit configuration). - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t FilterIdLow; /*!< Specifies the filter identification number (LSBs for a 32-bit - configuration, second one for a 16-bit configuration). - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t FilterMaskIdHigh; /*!< Specifies the filter mask number or identification number, - according to the mode (MSBs for a 32-bit configuration, - first one for a 16-bit configuration). - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t FilterMaskIdLow; /*!< Specifies the filter mask number or identification number, - according to the mode (LSBs for a 32-bit configuration, - second one for a 16-bit configuration). - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t FilterFIFOAssignment; /*!< Specifies the FIFO (0 or 1) which will be assigned to the filter. - This parameter can be a value of @ref CAN_filter_FIFO */ - - uint32_t FilterNumber; /*!< Specifies the filter which will be initialized. - This parameter must be a number between Min_Data = 0 and Max_Data = 27 */ - - uint32_t FilterMode; /*!< Specifies the filter mode to be initialized. - This parameter can be a value of @ref CAN_filter_mode */ - - uint32_t FilterScale; /*!< Specifies the filter scale. - This parameter can be a value of @ref CAN_filter_scale */ - - uint32_t FilterActivation; /*!< Enable or disable the filter. - This parameter can be set to ENABLE or DISABLE. */ - - uint32_t BankNumber; /*!< Select the start slave bank filter. - This parameter must be a number between Min_Data = 0 and Max_Data = 28 */ - -}CAN_FilterConfTypeDef; - -/** - * @brief CAN Tx message structure definition - */ -typedef struct -{ - uint32_t StdId; /*!< Specifies the standard identifier. - This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */ - - uint32_t ExtId; /*!< Specifies the extended identifier. - This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */ - - uint32_t IDE; /*!< Specifies the type of identifier for the message that will be transmitted. - This parameter can be a value of @ref CAN_Identifier_Type */ - - uint32_t RTR; /*!< Specifies the type of frame for the message that will be transmitted. - This parameter can be a value of @ref CAN_remote_transmission_request */ - - uint32_t DLC; /*!< Specifies the length of the frame that will be transmitted. - This parameter must be a number between Min_Data = 0 and Max_Data = 8 */ - - uint8_t Data[8]; /*!< Contains the data to be transmitted. - This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */ - -}CanTxMsgTypeDef; - -/** - * @brief CAN Rx message structure definition - */ -typedef struct -{ - uint32_t StdId; /*!< Specifies the standard identifier. - This parameter must be a number between Min_Data = 0 and Max_Data = 0x7FF */ - - uint32_t ExtId; /*!< Specifies the extended identifier. - This parameter must be a number between Min_Data = 0 and Max_Data = 0x1FFFFFFF */ - - uint32_t IDE; /*!< Specifies the type of identifier for the message that will be received. - This parameter can be a value of @ref CAN_Identifier_Type */ - - uint32_t RTR; /*!< Specifies the type of frame for the received message. - This parameter can be a value of @ref CAN_remote_transmission_request */ - - uint32_t DLC; /*!< Specifies the length of the frame that will be received. - This parameter must be a number between Min_Data = 0 and Max_Data = 8 */ - - uint8_t Data[8]; /*!< Contains the data to be received. - This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */ - - uint32_t FMI; /*!< Specifies the index of the filter the message stored in the mailbox passes through. - This parameter must be a number between Min_Data = 0 and Max_Data = 0xFF */ - - uint32_t FIFONumber; /*!< Specifies the receive FIFO number. - This parameter can be CAN_FIFO0 or CAN_FIFO1 */ - -}CanRxMsgTypeDef; - -/** - * @brief CAN handle Structure definition - */ -typedef struct -{ - CAN_TypeDef *Instance; /*!< Register base address */ - - CAN_InitTypeDef Init; /*!< CAN required parameters */ - - CanTxMsgTypeDef* pTxMsg; /*!< Pointer to transmit structure */ - - CanRxMsgTypeDef* pRxMsg; /*!< Pointer to reception structure */ - - __IO HAL_CAN_StateTypeDef State; /*!< CAN communication state */ - - HAL_LockTypeDef Lock; /*!< CAN locking object */ - - __IO uint32_t ErrorCode; /*!< CAN Error code */ - -}CAN_HandleTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup CAN_Exported_Constants CAN Exported Constants - * @{ - */ - -/** @defgroup HAL_CAN_Error_Code HAL CAN Error Code - * @{ - */ -#define HAL_CAN_ERROR_NONE 0x00 /*!< No error */ -#define HAL_CAN_ERROR_EWG 0x01 /*!< EWG error */ -#define HAL_CAN_ERROR_EPV 0x02 /*!< EPV error */ -#define HAL_CAN_ERROR_BOF 0x04 /*!< BOF error */ -#define HAL_CAN_ERROR_STF 0x08 /*!< Stuff error */ -#define HAL_CAN_ERROR_FOR 0x10 /*!< Form error */ -#define HAL_CAN_ERROR_ACK 0x20 /*!< Acknowledgment error */ -#define HAL_CAN_ERROR_BR 0x40 /*!< Bit recessive */ -#define HAL_CAN_ERROR_BD 0x80 /*!< LEC dominant */ -#define HAL_CAN_ERROR_CRC 0x100 /*!< LEC transfer error */ -/** - * @} - */ - -/** @defgroup CAN_InitStatus CAN InitStatus - * @{ - */ -#define CAN_INITSTATUS_FAILED ((uint8_t)0x00) /*!< CAN initialization failed */ -#define CAN_INITSTATUS_SUCCESS ((uint8_t)0x01) /*!< CAN initialization OK */ -/** - * @} - */ - -/** @defgroup CAN_operating_mode CAN Operating Mode - * @{ - */ -#define CAN_MODE_NORMAL ((uint32_t)0x00000000) /*!< Normal mode */ -#define CAN_MODE_LOOPBACK ((uint32_t)CAN_BTR_LBKM) /*!< Loopback mode */ -#define CAN_MODE_SILENT ((uint32_t)CAN_BTR_SILM) /*!< Silent mode */ -#define CAN_MODE_SILENT_LOOPBACK ((uint32_t)(CAN_BTR_LBKM | CAN_BTR_SILM)) /*!< Loopback combined with silent mode */ -/** - * @} - */ - -/** @defgroup CAN_synchronisation_jump_width CAN Synchronisation Jump Width - * @{ - */ -#define CAN_SJW_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */ -#define CAN_SJW_2TQ ((uint32_t)CAN_BTR_SJW_0) /*!< 2 time quantum */ -#define CAN_SJW_3TQ ((uint32_t)CAN_BTR_SJW_1) /*!< 3 time quantum */ -#define CAN_SJW_4TQ ((uint32_t)CAN_BTR_SJW) /*!< 4 time quantum */ -/** - * @} - */ - -/** @defgroup CAN_time_quantum_in_bit_segment_1 CAN Time Quantum in bit segment 1 - * @{ - */ -#define CAN_BS1_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */ -#define CAN_BS1_2TQ ((uint32_t)CAN_BTR_TS1_0) /*!< 2 time quantum */ -#define CAN_BS1_3TQ ((uint32_t)CAN_BTR_TS1_1) /*!< 3 time quantum */ -#define CAN_BS1_4TQ ((uint32_t)(CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 4 time quantum */ -#define CAN_BS1_5TQ ((uint32_t)CAN_BTR_TS1_2) /*!< 5 time quantum */ -#define CAN_BS1_6TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 6 time quantum */ -#define CAN_BS1_7TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 7 time quantum */ -#define CAN_BS1_8TQ ((uint32_t)(CAN_BTR_TS1_2 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 8 time quantum */ -#define CAN_BS1_9TQ ((uint32_t)CAN_BTR_TS1_3) /*!< 9 time quantum */ -#define CAN_BS1_10TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_0)) /*!< 10 time quantum */ -#define CAN_BS1_11TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1)) /*!< 11 time quantum */ -#define CAN_BS1_12TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_1 | CAN_BTR_TS1_0)) /*!< 12 time quantum */ -#define CAN_BS1_13TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2)) /*!< 13 time quantum */ -#define CAN_BS1_14TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_0)) /*!< 14 time quantum */ -#define CAN_BS1_15TQ ((uint32_t)(CAN_BTR_TS1_3 | CAN_BTR_TS1_2 | CAN_BTR_TS1_1)) /*!< 15 time quantum */ -#define CAN_BS1_16TQ ((uint32_t)CAN_BTR_TS1) /*!< 16 time quantum */ -/** - * @} - */ - -/** @defgroup CAN_time_quantum_in_bit_segment_2 CAN Time Quantum in bit segment 2 - * @{ - */ -#define CAN_BS2_1TQ ((uint32_t)0x00000000) /*!< 1 time quantum */ -#define CAN_BS2_2TQ ((uint32_t)CAN_BTR_TS2_0) /*!< 2 time quantum */ -#define CAN_BS2_3TQ ((uint32_t)CAN_BTR_TS2_1) /*!< 3 time quantum */ -#define CAN_BS2_4TQ ((uint32_t)(CAN_BTR_TS2_1 | CAN_BTR_TS2_0)) /*!< 4 time quantum */ -#define CAN_BS2_5TQ ((uint32_t)CAN_BTR_TS2_2) /*!< 5 time quantum */ -#define CAN_BS2_6TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_0)) /*!< 6 time quantum */ -#define CAN_BS2_7TQ ((uint32_t)(CAN_BTR_TS2_2 | CAN_BTR_TS2_1)) /*!< 7 time quantum */ -#define CAN_BS2_8TQ ((uint32_t)CAN_BTR_TS2) /*!< 8 time quantum */ -/** - * @} - */ - -/** @defgroup CAN_filter_mode CAN Filter Mode - * @{ - */ -#define CAN_FILTERMODE_IDMASK ((uint8_t)0x00) /*!< Identifier mask mode */ -#define CAN_FILTERMODE_IDLIST ((uint8_t)0x01) /*!< Identifier list mode */ -/** - * @} - */ - -/** @defgroup CAN_filter_scale CAN Filter Scale - * @{ - */ -#define CAN_FILTERSCALE_16BIT ((uint8_t)0x00) /*!< Two 16-bit filters */ -#define CAN_FILTERSCALE_32BIT ((uint8_t)0x01) /*!< One 32-bit filter */ -/** - * @} - */ - -/** @defgroup CAN_filter_FIFO CAN Filter FIFO - * @{ - */ -#define CAN_FILTER_FIFO0 ((uint8_t)0x00) /*!< Filter FIFO 0 assignment for filter x */ -#define CAN_FILTER_FIFO1 ((uint8_t)0x01) /*!< Filter FIFO 1 assignment for filter x */ -/** - * @} - */ - -/** @defgroup CAN_Identifier_Type CAN Identifier Type - * @{ - */ -#define CAN_ID_STD ((uint32_t)0x00000000) /*!< Standard Id */ -#define CAN_ID_EXT ((uint32_t)0x00000004) /*!< Extended Id */ -/** - * @} - */ - -/** @defgroup CAN_remote_transmission_request CAN Remote Transmission Request - * @{ - */ -#define CAN_RTR_DATA ((uint32_t)0x00000000) /*!< Data frame */ -#define CAN_RTR_REMOTE ((uint32_t)0x00000002) /*!< Remote frame */ -/** - * @} - */ - -/** @defgroup CAN_receive_FIFO_number_constants CAN Receive FIFO Number Constants - * @{ - */ -#define CAN_FIFO0 ((uint8_t)0x00) /*!< CAN FIFO 0 used to receive */ -#define CAN_FIFO1 ((uint8_t)0x01) /*!< CAN FIFO 1 used to receive */ -/** - * @} - */ - -/** @defgroup CAN_flags CAN Flags - * @{ - */ -/* If the flag is 0x3XXXXXXX, it means that it can be used with CAN_GetFlagStatus() - and CAN_ClearFlag() functions. */ -/* If the flag is 0x1XXXXXXX, it means that it can only be used with - CAN_GetFlagStatus() function. */ - -/* Transmit Flags */ -#define CAN_FLAG_RQCP0 ((uint32_t)0x00000500) /*!< Request MailBox0 flag */ -#define CAN_FLAG_RQCP1 ((uint32_t)0x00000508) /*!< Request MailBox1 flag */ -#define CAN_FLAG_RQCP2 ((uint32_t)0x00000510) /*!< Request MailBox2 flag */ -#define CAN_FLAG_TXOK0 ((uint32_t)0x00000501) /*!< Transmission OK MailBox0 flag */ -#define CAN_FLAG_TXOK1 ((uint32_t)0x00000509) /*!< Transmission OK MailBox1 flag */ -#define CAN_FLAG_TXOK2 ((uint32_t)0x00000511) /*!< Transmission OK MailBox2 flag */ -#define CAN_FLAG_TME0 ((uint32_t)0x0000051A) /*!< Transmit mailbox 0 empty flag */ -#define CAN_FLAG_TME1 ((uint32_t)0x0000051B) /*!< Transmit mailbox 0 empty flag */ -#define CAN_FLAG_TME2 ((uint32_t)0x0000051C) /*!< Transmit mailbox 0 empty flag */ - -/* Receive Flags */ -#define CAN_FLAG_FF0 ((uint32_t)0x00000203) /*!< FIFO 0 Full flag */ -#define CAN_FLAG_FOV0 ((uint32_t)0x00000204) /*!< FIFO 0 Overrun flag */ - -#define CAN_FLAG_FF1 ((uint32_t)0x00000403) /*!< FIFO 1 Full flag */ -#define CAN_FLAG_FOV1 ((uint32_t)0x00000404) /*!< FIFO 1 Overrun flag */ - -/* Operating Mode Flags */ -#define CAN_FLAG_WKU ((uint32_t)0x00000103) /*!< Wake up flag */ -#define CAN_FLAG_SLAK ((uint32_t)0x00000101) /*!< Sleep acknowledge flag */ -#define CAN_FLAG_SLAKI ((uint32_t)0x00000104) /*!< Sleep acknowledge flag */ -/* @note When SLAK interrupt is disabled (SLKIE=0), no polling on SLAKI is possible. - In this case the SLAK bit can be polled.*/ - -/* Error Flags */ -#define CAN_FLAG_EWG ((uint32_t)0x00000300) /*!< Error warning flag */ -#define CAN_FLAG_EPV ((uint32_t)0x00000301) /*!< Error passive flag */ -#define CAN_FLAG_BOF ((uint32_t)0x00000302) /*!< Bus-Off flag */ -/** - * @} - */ - -/** @defgroup CAN_Interrupts CAN Interrupts - * @{ - */ -#define CAN_IT_TME ((uint32_t)CAN_IER_TMEIE) /*!< Transmit mailbox empty interrupt */ - -/* Receive Interrupts */ -#define CAN_IT_FMP0 ((uint32_t)CAN_IER_FMPIE0) /*!< FIFO 0 message pending interrupt */ -#define CAN_IT_FF0 ((uint32_t)CAN_IER_FFIE0) /*!< FIFO 0 full interrupt */ -#define CAN_IT_FOV0 ((uint32_t)CAN_IER_FOVIE0) /*!< FIFO 0 overrun interrupt */ -#define CAN_IT_FMP1 ((uint32_t)CAN_IER_FMPIE1) /*!< FIFO 1 message pending interrupt */ -#define CAN_IT_FF1 ((uint32_t)CAN_IER_FFIE1) /*!< FIFO 1 full interrupt */ -#define CAN_IT_FOV1 ((uint32_t)CAN_IER_FOVIE1) /*!< FIFO 1 overrun interrupt */ - -/* Operating Mode Interrupts */ -#define CAN_IT_WKU ((uint32_t)CAN_IER_WKUIE) /*!< Wake-up interrupt */ -#define CAN_IT_SLK ((uint32_t)CAN_IER_SLKIE) /*!< Sleep acknowledge interrupt */ - -/* Error Interrupts */ -#define CAN_IT_EWG ((uint32_t)CAN_IER_EWGIE) /*!< Error warning interrupt */ -#define CAN_IT_EPV ((uint32_t)CAN_IER_EPVIE) /*!< Error passive interrupt */ -#define CAN_IT_BOF ((uint32_t)CAN_IER_BOFIE) /*!< Bus-off interrupt */ -#define CAN_IT_LEC ((uint32_t)CAN_IER_LECIE) /*!< Last error code interrupt */ -#define CAN_IT_ERR ((uint32_t)CAN_IER_ERRIE) /*!< Error Interrupt */ -/** - * @} - */ - -/** @defgroup CAN_Mailboxes_Definition CAN Mailboxes Definition - * @{ - */ -#define CAN_TXMAILBOX_0 ((uint8_t)0x00) -#define CAN_TXMAILBOX_1 ((uint8_t)0x01) -#define CAN_TXMAILBOX_2 ((uint8_t)0x02) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup CAN_Exported_Macros CAN Exported Macros - * @{ - */ - -/** @brief Reset CAN handle state - * @param __HANDLE__: specifies the CAN Handle. - * @retval None - */ -#define __HAL_CAN_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CAN_STATE_RESET) - -/** - * @brief Enable the specified CAN interrupts. - * @param __HANDLE__: CAN handle - * @param __INTERRUPT__: CAN Interrupt - * @retval None - */ -#define __HAL_CAN_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) |= (__INTERRUPT__)) - -/** - * @brief Disable the specified CAN interrupts. - * @param __HANDLE__: CAN handle - * @param __INTERRUPT__: CAN Interrupt - * @retval None - */ -#define __HAL_CAN_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IER) &= ~(__INTERRUPT__)) - -/** - * @brief Return the number of pending received messages. - * @param __HANDLE__: CAN handle - * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. - * @retval The number of pending message. - */ -#define __HAL_CAN_MSG_PENDING(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \ -((uint8_t)((__HANDLE__)->Instance->RF0R&(uint32_t)0x03)) : ((uint8_t)((__HANDLE__)->Instance->RF1R&(uint32_t)0x03))) - -/** @brief Check whether the specified CAN flag is set or not. - * @param __HANDLE__: CAN Handle - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg CAN_TSR_RQCP0: Request MailBox0 Flag - * @arg CAN_TSR_RQCP1: Request MailBox1 Flag - * @arg CAN_TSR_RQCP2: Request MailBox2 Flag - * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag - * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag - * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag - * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag - * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag - * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag - * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag - * @arg CAN_FLAG_FF0: FIFO 0 Full Flag - * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag - * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag - * @arg CAN_FLAG_FF1: FIFO 1 Full Flag - * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag - * @arg CAN_FLAG_WKU: Wake up Flag - * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag - * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag - * @arg CAN_FLAG_EWG: Error Warning Flag - * @arg CAN_FLAG_EPV: Error Passive Flag - * @arg CAN_FLAG_BOF: Bus-Off Flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_CAN_GET_FLAG(__HANDLE__, __FLAG__) \ -((((__FLAG__) >> 8) == 5)? ((((__HANDLE__)->Instance->TSR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \ - (((__FLAG__) >> 8) == 2)? ((((__HANDLE__)->Instance->RF0R) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \ - (((__FLAG__) >> 8) == 4)? ((((__HANDLE__)->Instance->RF1R) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \ - (((__FLAG__) >> 8) == 1)? ((((__HANDLE__)->Instance->MSR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK))): \ - ((((__HANDLE__)->Instance->ESR) & (1 << ((__FLAG__) & CAN_FLAG_MASK))) == (1 << ((__FLAG__) & CAN_FLAG_MASK)))) - -/** @brief Clear the specified CAN pending flag. - * @param __HANDLE__: CAN Handle. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg CAN_TSR_RQCP0: Request MailBox0 Flag - * @arg CAN_TSR_RQCP1: Request MailBox1 Flag - * @arg CAN_TSR_RQCP2: Request MailBox2 Flag - * @arg CAN_FLAG_TXOK0: Transmission OK MailBox0 Flag - * @arg CAN_FLAG_TXOK1: Transmission OK MailBox1 Flag - * @arg CAN_FLAG_TXOK2: Transmission OK MailBox2 Flag - * @arg CAN_FLAG_TME0: Transmit mailbox 0 empty Flag - * @arg CAN_FLAG_TME1: Transmit mailbox 1 empty Flag - * @arg CAN_FLAG_TME2: Transmit mailbox 2 empty Flag - * @arg CAN_FLAG_FMP0: FIFO 0 Message Pending Flag - * @arg CAN_FLAG_FF0: FIFO 0 Full Flag - * @arg CAN_FLAG_FOV0: FIFO 0 Overrun Flag - * @arg CAN_FLAG_FMP1: FIFO 1 Message Pending Flag - * @arg CAN_FLAG_FF1: FIFO 1 Full Flag - * @arg CAN_FLAG_FOV1: FIFO 1 Overrun Flag - * @arg CAN_FLAG_WKU: Wake up Flag - * @arg CAN_FLAG_SLAK: Sleep acknowledge Flag - * @arg CAN_FLAG_SLAKI: Sleep acknowledge Flag - * @arg CAN_FLAG_EWG: Error Warning Flag - * @arg CAN_FLAG_EPV: Error Passive Flag - * @arg CAN_FLAG_BOF: Bus-Off Flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_CAN_CLEAR_FLAG(__HANDLE__, __FLAG__) \ -((((__FLAG__) >> 8) == 5)? (((__HANDLE__)->Instance->TSR) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \ - (((__FLAG__) >> 8) == 2)? (((__HANDLE__)->Instance->RF0R) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \ - (((__FLAG__) >> 8) == 4)? (((__HANDLE__)->Instance->RF1R) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \ - (((__FLAG__) >> 8) == 1)? (((__HANDLE__)->Instance->MSR) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK))): \ - (((__HANDLE__)->Instance->ESR) = ~((uint32_t)1 << ((__FLAG__) & CAN_FLAG_MASK)))) - -/** @brief Check if the specified CAN interrupt source is enabled or disabled. - * @param __HANDLE__: CAN Handle - * @param __INTERRUPT__: specifies the CAN interrupt source to check. - * This parameter can be one of the following values: - * @arg CAN_IT_TME: Transmit mailbox empty interrupt enable - * @arg CAN_IT_FMP0: FIFO0 message pending interrupt enable - * @arg CAN_IT_FMP1: FIFO1 message pending interrupt enable - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_CAN_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** - * @brief Check the transmission status of a CAN Frame. - * @param __HANDLE__: CAN Handle - * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission. - * @retval The new status of transmission (TRUE or FALSE). - */ -#define __HAL_CAN_TRANSMIT_STATUS(__HANDLE__, __TRANSMITMAILBOX__)\ -(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) == (CAN_TSR_RQCP0 | CAN_TSR_TXOK0 | CAN_TSR_TME0)) :\ - ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) == (CAN_TSR_RQCP1 | CAN_TSR_TXOK1 | CAN_TSR_TME1)) :\ - ((((__HANDLE__)->Instance->TSR) & (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2)) == (CAN_TSR_RQCP2 | CAN_TSR_TXOK2 | CAN_TSR_TME2))) - -/** - * @brief Release the specified receive FIFO. - * @param __HANDLE__: CAN handle - * @param __FIFONUMBER__: Receive FIFO number, CAN_FIFO0 or CAN_FIFO1. - * @retval None - */ -#define __HAL_CAN_FIFO_RELEASE(__HANDLE__, __FIFONUMBER__) (((__FIFONUMBER__) == CAN_FIFO0)? \ -((__HANDLE__)->Instance->RF0R |= CAN_RF0R_RFOM0) : ((__HANDLE__)->Instance->RF1R |= CAN_RF1R_RFOM1)) - -/** - * @brief Cancel a transmit request. - * @param __HANDLE__: CAN Handle - * @param __TRANSMITMAILBOX__: the number of the mailbox that is used for transmission. - * @retval None - */ -#define __HAL_CAN_CANCEL_TRANSMIT(__HANDLE__, __TRANSMITMAILBOX__)\ -(((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_0)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ0) :\ - ((__TRANSMITMAILBOX__) == CAN_TXMAILBOX_1)? ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ1) :\ - ((__HANDLE__)->Instance->TSR |= CAN_TSR_ABRQ2)) - -/** - * @brief Enable or disable the DBG Freeze for CAN. - * @param __HANDLE__: CAN Handle - * @param __NEWSTATE__: new state of the CAN peripheral. - * This parameter can be: ENABLE (CAN reception/transmission is frozen - * during debug. Reception FIFOs can still be accessed/controlled normally) - * or DISABLE (CAN is working during debug). - * @retval None - */ -#define __HAL_CAN_DBG_FREEZE(__HANDLE__, __NEWSTATE__) (((__NEWSTATE__) == ENABLE)? \ -((__HANDLE__)->Instance->MCR |= CAN_MCR_DBF) : ((__HANDLE__)->Instance->MCR &= ~CAN_MCR_DBF)) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup CAN_Exported_Functions - * @{ - */ - -/** @addtogroup CAN_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions ***********************************/ -HAL_StatusTypeDef HAL_CAN_Init(CAN_HandleTypeDef* hcan); -HAL_StatusTypeDef HAL_CAN_ConfigFilter(CAN_HandleTypeDef* hcan, CAN_FilterConfTypeDef* sFilterConfig); -HAL_StatusTypeDef HAL_CAN_DeInit(CAN_HandleTypeDef* hcan); -void HAL_CAN_MspInit(CAN_HandleTypeDef* hcan); -void HAL_CAN_MspDeInit(CAN_HandleTypeDef* hcan); -/** - * @} - */ - -/** @addtogroup CAN_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions ******************************************************/ -HAL_StatusTypeDef HAL_CAN_Transmit(CAN_HandleTypeDef *hcan, uint32_t Timeout); -HAL_StatusTypeDef HAL_CAN_Transmit_IT(CAN_HandleTypeDef *hcan); -HAL_StatusTypeDef HAL_CAN_Receive(CAN_HandleTypeDef *hcan, uint8_t FIFONumber, uint32_t Timeout); -HAL_StatusTypeDef HAL_CAN_Receive_IT(CAN_HandleTypeDef *hcan, uint8_t FIFONumber); -HAL_StatusTypeDef HAL_CAN_Sleep(CAN_HandleTypeDef *hcan); -HAL_StatusTypeDef HAL_CAN_WakeUp(CAN_HandleTypeDef *hcan); -void HAL_CAN_IRQHandler(CAN_HandleTypeDef* hcan); -void HAL_CAN_TxCpltCallback(CAN_HandleTypeDef* hcan); -void HAL_CAN_RxCpltCallback(CAN_HandleTypeDef* hcan); -void HAL_CAN_ErrorCallback(CAN_HandleTypeDef *hcan); -/** - * @} - */ - -/** @addtogroup CAN_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State functions ***************************************************/ -uint32_t HAL_CAN_GetError(CAN_HandleTypeDef *hcan); -HAL_CAN_StateTypeDef HAL_CAN_GetState(CAN_HandleTypeDef* hcan); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/** @defgroup CAN_Private_Types CAN Private Types - * @{ - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup CAN_Private_Variables CAN Private Variables - * @{ - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup CAN_Private_Constants CAN Private Constants - * @{ - */ -#define CAN_TXSTATUS_NOMAILBOX ((uint8_t)0x04) /*!< CAN cell did not provide CAN_TxStatus_NoMailBox */ -#define CAN_FLAG_MASK ((uint32_t)0x000000FF) -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup CAN_Private_Macros CAN Private Macros - * @{ - */ -#define IS_CAN_MODE(MODE) (((MODE) == CAN_MODE_NORMAL) || \ - ((MODE) == CAN_MODE_LOOPBACK)|| \ - ((MODE) == CAN_MODE_SILENT) || \ - ((MODE) == CAN_MODE_SILENT_LOOPBACK)) -#define IS_CAN_SJW(SJW) (((SJW) == CAN_SJW_1TQ) || ((SJW) == CAN_SJW_2TQ)|| \ - ((SJW) == CAN_SJW_3TQ) || ((SJW) == CAN_SJW_4TQ)) -#define IS_CAN_BS1(BS1) ((BS1) <= CAN_BS1_16TQ) -#define IS_CAN_BS2(BS2) ((BS2) <= CAN_BS2_8TQ) -#define IS_CAN_PRESCALER(PRESCALER) (((PRESCALER) >= 1) && ((PRESCALER) <= 1024)) -#define IS_CAN_FILTER_NUMBER(NUMBER) ((NUMBER) <= 27) -#define IS_CAN_FILTER_MODE(MODE) (((MODE) == CAN_FILTERMODE_IDMASK) || \ - ((MODE) == CAN_FILTERMODE_IDLIST)) -#define IS_CAN_FILTER_SCALE(SCALE) (((SCALE) == CAN_FILTERSCALE_16BIT) || \ - ((SCALE) == CAN_FILTERSCALE_32BIT)) -#define IS_CAN_FILTER_FIFO(FIFO) (((FIFO) == CAN_FILTER_FIFO0) || \ - ((FIFO) == CAN_FILTER_FIFO1)) -#define IS_CAN_BANKNUMBER(BANKNUMBER) ((BANKNUMBER) <= 28) - -#define IS_CAN_TRANSMITMAILBOX(TRANSMITMAILBOX) ((TRANSMITMAILBOX) <= ((uint8_t)0x02)) -#define IS_CAN_STDID(STDID) ((STDID) <= ((uint32_t)0x7FF)) -#define IS_CAN_EXTID(EXTID) ((EXTID) <= ((uint32_t)0x1FFFFFFF)) -#define IS_CAN_DLC(DLC) ((DLC) <= ((uint8_t)0x08)) - -#define IS_CAN_IDTYPE(IDTYPE) (((IDTYPE) == CAN_ID_STD) || \ - ((IDTYPE) == CAN_ID_EXT)) -#define IS_CAN_RTR(RTR) (((RTR) == CAN_RTR_DATA) || ((RTR) == CAN_RTR_REMOTE)) -#define IS_CAN_FIFO(FIFO) (((FIFO) == CAN_FIFO0) || ((FIFO) == CAN_FIFO1)) - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup CAN_Private_Functions CAN Private Functions - * @{ - */ - -/** - * @} - */ - -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_CAN_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cec.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cec.h deleted file mode 100644 index f9efd78..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cec.h +++ /dev/null @@ -1,681 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_cec.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of CEC HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CEC_H -#define __STM32F4xx_HAL_CEC_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F446xx) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup CEC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup CEC_Exported_Types CEC Exported Types - * @{ - */ - -/** - * @brief CEC Init Structure definition - */ -typedef struct -{ - uint32_t SignalFreeTime; /*!< Set SFT field, specifies the Signal Free Time. - It can be one of @ref CEC_Signal_Free_Time - and belongs to the set {0,...,7} where - 0x0 is the default configuration - else means 0.5 + (SignalFreeTime - 1) nominal data bit periods */ - - uint32_t Tolerance; /*!< Set RXTOL bit, specifies the tolerance accepted on the received waveforms, - it can be a value of @ref CEC_Tolerance : it is either CEC_STANDARD_TOLERANCE - or CEC_EXTENDED_TOLERANCE */ - - uint32_t BRERxStop; /*!< Set BRESTP bit @ref CEC_BRERxStop : specifies whether or not a Bit Rising Error stops the reception. - CEC_NO_RX_STOP_ON_BRE: reception is not stopped. - CEC_RX_STOP_ON_BRE: reception is stopped. */ - - uint32_t BREErrorBitGen; /*!< Set BREGEN bit @ref CEC_BREErrorBitGen : specifies whether or not an Error-Bit is generated on the - CEC line upon Bit Rising Error detection. - CEC_BRE_ERRORBIT_NO_GENERATION: no error-bit generation. - CEC_BRE_ERRORBIT_GENERATION: error-bit generation if BRESTP is set. */ - - uint32_t LBPEErrorBitGen; /*!< Set LBPEGEN bit @ref CEC_LBPEErrorBitGen : specifies whether or not an Error-Bit is generated on the - CEC line upon Long Bit Period Error detection. - CEC_LBPE_ERRORBIT_NO_GENERATION: no error-bit generation. - CEC_LBPE_ERRORBIT_GENERATION: error-bit generation. */ - - uint32_t BroadcastMsgNoErrorBitGen; /*!< Set BRDNOGEN bit @ref CEC_BroadCastMsgErrorBitGen : allows to avoid an Error-Bit generation on the CEC line - upon an error detected on a broadcast message. - - It supersedes BREGEN and LBPEGEN bits for a broadcast message error handling. It can take two values: - - 1) CEC_BROADCASTERROR_ERRORBIT_GENERATION. - a) BRE detection: error-bit generation on the CEC line if BRESTP=CEC_RX_STOP_ON_BRE - and BREGEN=CEC_BRE_ERRORBIT_NO_GENERATION. - b) LBPE detection: error-bit generation on the CEC line - if LBPGEN=CEC_LBPE_ERRORBIT_NO_GENERATION. - - 2) CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION. - no error-bit generation in case neither a) nor b) are satisfied. Additionally, - there is no error-bit generation in case of Short Bit Period Error detection in - a broadcast message while LSTN bit is set. */ - - uint32_t SignalFreeTimeOption; /*!< Set SFTOP bit @ref CEC_SFT_Option : specifies when SFT timer starts. - CEC_SFT_START_ON_TXSOM SFT: timer starts when TXSOM is set by software. - CEC_SFT_START_ON_TX_RX_END: SFT timer starts automatically at the end of message transmission/reception. */ - - uint32_t OwnAddress; /*!< Set OAR field, specifies CEC device address within a 15-bit long field */ - - uint32_t ListenMode; /*!< Set LSTN bit @ref CEC_Listening_Mode : specifies device listening mode. It can take two values: - - CEC_REDUCED_LISTENING_MODE: CEC peripheral receives only message addressed to its - own address (OAR). Messages addressed to different destination are ignored. - Broadcast messages are always received. - - CEC_FULL_LISTENING_MODE: CEC peripheral receives messages addressed to its own - address (OAR) with positive acknowledge. Messages addressed to different destination - are received, but without interfering with the CEC bus: no acknowledge sent. */ - - uint8_t InitiatorAddress; /* Initiator address (source logical address, sent in each header) */ - -}CEC_InitTypeDef; - -/** - * @brief HAL CEC State structures definition - */ -typedef enum -{ - HAL_CEC_STATE_RESET = 0x00, /*!< Peripheral Reset state */ - HAL_CEC_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ - HAL_CEC_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ - HAL_CEC_STATE_BUSY_TX = 0x03, /*!< Data Transmission process is ongoing */ - HAL_CEC_STATE_BUSY_RX = 0x04, /*!< Data Reception process is ongoing */ - HAL_CEC_STATE_STANDBY_RX = 0x05, /*!< IP ready to receive, doesn't prevent IP to transmit */ - HAL_CEC_STATE_TIMEOUT = 0x06, /*!< Timeout state */ - HAL_CEC_STATE_ERROR = 0x07 /*!< State Error */ -}HAL_CEC_StateTypeDef; - -/** - * @brief CEC handle Structure definition - */ -typedef struct -{ - CEC_TypeDef *Instance; /* CEC registers base address */ - - CEC_InitTypeDef Init; /* CEC communication parameters */ - - uint8_t *pTxBuffPtr; /* Pointer to CEC Tx transfer Buffer */ - - uint16_t TxXferCount; /* CEC Tx Transfer Counter */ - - uint8_t *pRxBuffPtr; /* Pointer to CEC Rx transfer Buffer */ - - uint16_t RxXferSize; /* CEC Rx Transfer size, 0: header received only */ - - uint32_t ErrorCode; /* For errors handling purposes, copy of ISR register - in case error is reported */ - - HAL_LockTypeDef Lock; /* Locking object */ - - HAL_CEC_StateTypeDef State; /* CEC communication state */ - -}CEC_HandleTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup CEC_Exported_Constants CEC Exported Constants - * @{ - */ - -/** @defgroup CEC_Error_Code CEC Error Code - * @{ - */ -#define HAL_CEC_ERROR_NONE (uint32_t) 0x0 /*!< no error */ -#define HAL_CEC_ERROR_RXOVR CEC_ISR_RXOVR /*!< CEC Rx-Overrun */ -#define HAL_CEC_ERROR_BRE CEC_ISR_BRE /*!< CEC Rx Bit Rising Error */ -#define HAL_CEC_ERROR_SBPE CEC_ISR_SBPE /*!< CEC Rx Short Bit period Error */ -#define HAL_CEC_ERROR_LBPE CEC_ISR_LBPE /*!< CEC Rx Long Bit period Error */ -#define HAL_CEC_ERROR_RXACKE CEC_ISR_RXACKE /*!< CEC Rx Missing Acknowledge */ -#define HAL_CEC_ERROR_ARBLST CEC_ISR_ARBLST /*!< CEC Arbitration Lost */ -#define HAL_CEC_ERROR_TXUDR CEC_ISR_TXUDR /*!< CEC Tx-Buffer Underrun */ -#define HAL_CEC_ERROR_TXERR CEC_ISR_TXERR /*!< CEC Tx-Error */ -#define HAL_CEC_ERROR_TXACKE CEC_ISR_TXACKE /*!< CEC Tx Missing Acknowledge */ -/** - * @} - */ - -/** @defgroup CEC_Signal_Free_Time CEC Signal Free Time setting parameter - * @{ - */ -#define CEC_DEFAULT_SFT ((uint32_t)0x00000000) -#define CEC_0_5_BITPERIOD_SFT ((uint32_t)0x00000001) -#define CEC_1_5_BITPERIOD_SFT ((uint32_t)0x00000002) -#define CEC_2_5_BITPERIOD_SFT ((uint32_t)0x00000003) -#define CEC_3_5_BITPERIOD_SFT ((uint32_t)0x00000004) -#define CEC_4_5_BITPERIOD_SFT ((uint32_t)0x00000005) -#define CEC_5_5_BITPERIOD_SFT ((uint32_t)0x00000006) -#define CEC_6_5_BITPERIOD_SFT ((uint32_t)0x00000007) -/** - * @} - */ - -/** @defgroup CEC_Tolerance CEC Receiver Tolerance - * @{ - */ -#define CEC_STANDARD_TOLERANCE ((uint32_t)0x00000000) -#define CEC_EXTENDED_TOLERANCE ((uint32_t)CEC_CFGR_RXTOL) -/** - * @} - */ - -/** @defgroup CEC_BRERxStop CEC Reception Stop on Error - * @{ - */ -#define CEC_NO_RX_STOP_ON_BRE ((uint32_t)0x00000000) -#define CEC_RX_STOP_ON_BRE ((uint32_t)CEC_CFGR_BRESTP) -/** - * @} - */ - -/** @defgroup CEC_BREErrorBitGen CEC Error Bit Generation if Bit Rise Error reported - * @{ - */ -#define CEC_BRE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000) -#define CEC_BRE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BREGEN) -/** - * @} - */ - -/** @defgroup CEC_LBPEErrorBitGen CEC Error Bit Generation if Long Bit Period Error reported - * @{ - */ -#define CEC_LBPE_ERRORBIT_NO_GENERATION ((uint32_t)0x00000000) -#define CEC_LBPE_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_LBPEGEN) -/** - * @} - */ - -/** @defgroup CEC_BroadCastMsgErrorBitGen CEC Error Bit Generation on Broadcast message - * @{ - */ -#define CEC_BROADCASTERROR_ERRORBIT_GENERATION ((uint32_t)0x00000000) -#define CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION ((uint32_t)CEC_CFGR_BRDNOGEN) -/** - * @} - */ - -/** @defgroup CEC_SFT_Option CEC Signal Free Time start option - * @{ - */ -#define CEC_SFT_START_ON_TXSOM ((uint32_t)0x00000000) -#define CEC_SFT_START_ON_TX_RX_END ((uint32_t)CEC_CFGR_SFTOPT) -/** - * @} - */ - -/** @defgroup CEC_Listening_Mode CEC Listening mode option - * @{ - */ -#define CEC_REDUCED_LISTENING_MODE ((uint32_t)0x00000000) -#define CEC_FULL_LISTENING_MODE ((uint32_t)CEC_CFGR_LSTN) -/** - * @} - */ - -/** @defgroup CEC_OAR_Position CEC Device Own Address position in CEC CFGR register - * @{ - */ -#define CEC_CFGR_OAR_LSB_POS ((uint32_t) 16) -/** - * @} - */ - -/** @defgroup CEC_Initiator_Position CEC Initiator logical address position in message header - * @{ - */ -#define CEC_INITIATOR_LSB_POS ((uint32_t) 4) -/** - * @} - */ - -/** @defgroup CEC_Interrupts_Definitions CEC Interrupts definition - * @{ - */ -#define CEC_IT_TXACKE CEC_IER_TXACKEIE -#define CEC_IT_TXERR CEC_IER_TXERRIE -#define CEC_IT_TXUDR CEC_IER_TXUDRIE -#define CEC_IT_TXEND CEC_IER_TXENDIE -#define CEC_IT_TXBR CEC_IER_TXBRIE -#define CEC_IT_ARBLST CEC_IER_ARBLSTIE -#define CEC_IT_RXACKE CEC_IER_RXACKEIE -#define CEC_IT_LBPE CEC_IER_LBPEIE -#define CEC_IT_SBPE CEC_IER_SBPEIE -#define CEC_IT_BRE CEC_IER_BREIE -#define CEC_IT_RXOVR CEC_IER_RXOVRIE -#define CEC_IT_RXEND CEC_IER_RXENDIE -#define CEC_IT_RXBR CEC_IER_RXBRIE -/** - * @} - */ - -/** @defgroup CEC_Flags_Definitions CEC Flags definition - * @{ - */ -#define CEC_FLAG_TXACKE CEC_ISR_TXACKE -#define CEC_FLAG_TXERR CEC_ISR_TXERR -#define CEC_FLAG_TXUDR CEC_ISR_TXUDR -#define CEC_FLAG_TXEND CEC_ISR_TXEND -#define CEC_FLAG_TXBR CEC_ISR_TXBR -#define CEC_FLAG_ARBLST CEC_ISR_ARBLST -#define CEC_FLAG_RXACKE CEC_ISR_RXACKE -#define CEC_FLAG_LBPE CEC_ISR_LBPE -#define CEC_FLAG_SBPE CEC_ISR_SBPE -#define CEC_FLAG_BRE CEC_ISR_BRE -#define CEC_FLAG_RXOVR CEC_ISR_RXOVR -#define CEC_FLAG_RXEND CEC_ISR_RXEND -#define CEC_FLAG_RXBR CEC_ISR_RXBR -/** - * @} - */ - -/** @defgroup CEC_ALL_ERROR CEC all RX or TX errors flags - * @{ - */ -#define CEC_ISR_ALL_ERROR ((uint32_t)CEC_ISR_RXOVR|CEC_ISR_BRE|CEC_ISR_SBPE|CEC_ISR_LBPE|CEC_ISR_RXACKE|\ - CEC_ISR_ARBLST|CEC_ISR_TXUDR|CEC_ISR_TXERR|CEC_ISR_TXACKE) -/** - * @} - */ - -/** @defgroup CEC_IER_ALL_RX CEC all RX errors interrupts enabling flag - * @{ - */ -#define CEC_IER_RX_ALL_ERR ((uint32_t)CEC_IER_RXACKEIE|CEC_IER_LBPEIE|CEC_IER_SBPEIE|CEC_IER_BREIE|CEC_IER_RXOVRIE) -/** - * @} - */ - -/** @defgroup CEC_IER_ALL_TX CEC all TX errors interrupts enabling flag - * @{ - */ -#define CEC_IER_TX_ALL_ERR ((uint32_t)CEC_IER_TXACKEIE|CEC_IER_TXERRIE|CEC_IER_TXUDRIE|CEC_IER_ARBLSTIE) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup CEC_Exported_Macros CEC Exported Macros - * @{ - */ - -/** @brief Reset CEC handle state - * @param __HANDLE__: CEC handle. - * @retval None - */ -#define __HAL_CEC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CEC_STATE_RESET) - -/** @brief Checks whether or not the specified CEC interrupt flag is set. - * @param __HANDLE__: specifies the CEC Handle. - * @param __FLAG__: specifies the interrupt to check. - * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error - * @arg CEC_FLAG_TXERR: Tx Error. - * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun. - * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte). - * @arg CEC_FLAG_TXBR: Tx-Byte Request. - * @arg CEC_FLAG_ARBLST: Arbitration Lost - * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge - * @arg CEC_FLAG_LBPE: Rx Long period Error - * @arg CEC_FLAG_SBPE: Rx Short period Error - * @arg CEC_FLAG_BRE: Rx Bit Rissing Error - * @arg CEC_FLAG_RXOVR: Rx Overrun. - * @arg CEC_FLAG_RXEND: End Of Reception. - * @arg CEC_FLAG_RXBR: Rx-Byte Received. - * @retval ITStatus - */ -#define __HAL_CEC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__)) - -/** @brief Clears the interrupt or status flag when raised (write at 1) - * @param __HANDLE__: specifies the CEC Handle. - * @param __FLAG__: specifies the interrupt/status flag to clear. - * This parameter can be one of the following values: - * @arg CEC_FLAG_TXACKE: Tx Missing acknowledge Error - * @arg CEC_FLAG_TXERR: Tx Error. - * @arg CEC_FLAG_TXUDR: Tx-Buffer Underrun. - * @arg CEC_FLAG_TXEND: End of transmission (successful transmission of the last byte). - * @arg CEC_FLAG_TXBR: Tx-Byte Request. - * @arg CEC_FLAG_ARBLST: Arbitration Lost - * @arg CEC_FLAG_RXACKE: Rx-Missing Acknowledge - * @arg CEC_FLAG_LBPE: Rx Long period Error - * @arg CEC_FLAG_SBPE: Rx Short period Error - * @arg CEC_FLAG_BRE: Rx Bit Rissing Error - * @arg CEC_FLAG_RXOVR: Rx Overrun. - * @arg CEC_FLAG_RXEND: End Of Reception. - * @arg CEC_FLAG_RXBR: Rx-Byte Received. - * @retval none - */ -#define __HAL_CEC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR |= (__FLAG__)) - -/** @brief Enables the specified CEC interrupt. - * @param __HANDLE__: specifies the CEC Handle. - * @param __INTERRUPT__: specifies the CEC interrupt to enable. - * This parameter can be one of the following values: - * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable - * @arg CEC_IT_TXERR: Tx Error IT Enable - * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable - * @arg CEC_IT_TXEND: End of transmission IT Enable - * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable - * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable - * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable - * @arg CEC_IT_LBPE: Rx Long period Error IT Enable - * @arg CEC_IT_SBPE: Rx Short period Error IT Enable - * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable - * @arg CEC_IT_RXOVR: Rx Overrun IT Enable - * @arg CEC_IT_RXEND: End Of Reception IT Enable - * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable - * @retval none - */ -#define __HAL_CEC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) - -/** @brief Disables the specified CEC interrupt. - * @param __HANDLE__: specifies the CEC Handle. - * @param __INTERRUPT__: specifies the CEC interrupt to disable. - * This parameter can be one of the following values: - * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable - * @arg CEC_IT_TXERR: Tx Error IT Enable - * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable - * @arg CEC_IT_TXEND: End of transmission IT Enable - * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable - * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable - * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable - * @arg CEC_IT_LBPE: Rx Long period Error IT Enable - * @arg CEC_IT_SBPE: Rx Short period Error IT Enable - * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable - * @arg CEC_IT_RXOVR: Rx Overrun IT Enable - * @arg CEC_IT_RXEND: End Of Reception IT Enable - * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable - * @retval none - */ -#define __HAL_CEC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= (~(__INTERRUPT__))) - -/** @brief Checks whether or not the specified CEC interrupt is enabled. - * @param __HANDLE__: specifies the CEC Handle. - * @param __INTERRUPT__: specifies the CEC interrupt to check. - * This parameter can be one of the following values: - * @arg CEC_IT_TXACKE: Tx Missing acknowledge Error IT Enable - * @arg CEC_IT_TXERR: Tx Error IT Enable - * @arg CEC_IT_TXUDR: Tx-Buffer Underrun IT Enable - * @arg CEC_IT_TXEND: End of transmission IT Enable - * @arg CEC_IT_TXBR: Tx-Byte Request IT Enable - * @arg CEC_IT_ARBLST: Arbitration Lost IT Enable - * @arg CEC_IT_RXACKE: Rx-Missing Acknowledge IT Enable - * @arg CEC_IT_LBPE: Rx Long period Error IT Enable - * @arg CEC_IT_SBPE: Rx Short period Error IT Enable - * @arg CEC_IT_BRE: Rx Bit Rising Error IT Enable - * @arg CEC_IT_RXOVR: Rx Overrun IT Enable - * @arg CEC_IT_RXEND: End Of Reception IT Enable - * @arg CEC_IT_RXBR: Rx-Byte Received IT Enable - * @retval FlagStatus - */ -#define __HAL_CEC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER & (__INTERRUPT__)) - -/** @brief Enables the CEC device - * @param __HANDLE__: specifies the CEC Handle. - * @retval none - */ -#define __HAL_CEC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_CECEN) - -/** @brief Disables the CEC device - * @param __HANDLE__: specifies the CEC Handle. - * @retval none - */ -#define __HAL_CEC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CEC_CR_CECEN) - -/** @brief Set Transmission Start flag - * @param __HANDLE__: specifies the CEC Handle. - * @retval none - */ -#define __HAL_CEC_FIRST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXSOM) - -/** @brief Set Transmission End flag - * @param __HANDLE__: specifies the CEC Handle. - * @retval none - * If the CEC message consists of only one byte, TXEOM must be set before of TXSOM. - */ -#define __HAL_CEC_LAST_BYTE_TX_SET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CEC_CR_TXEOM) - -/** @brief Get Transmission Start flag - * @param __HANDLE__: specifies the CEC Handle. - * @retval FlagStatus - */ -#define __HAL_CEC_GET_TRANSMISSION_START_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXSOM) - -/** @brief Get Transmission End flag - * @param __HANDLE__: specifies the CEC Handle. - * @retval FlagStatus - */ -#define __HAL_CEC_GET_TRANSMISSION_END_FLAG(__HANDLE__) ((__HANDLE__)->Instance->CR & CEC_CR_TXEOM) - -/** @brief Clear OAR register - * @param __HANDLE__: specifies the CEC Handle. - * @retval none - */ -#define __HAL_CEC_CLEAR_OAR(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CFGR, CEC_CFGR_OAR) - -/** @brief Set OAR register (without resetting previously set address in case of multi-address mode) - * To reset OAR, __HAL_CEC_CLEAR_OAR() needs to be called beforehand - * @param __HANDLE__: specifies the CEC Handle. - * @param __ADDRESS__: Own Address value (CEC logical address is identified by bit position) - * @retval none - */ -#define __HAL_CEC_SET_OAR(__HANDLE__,__ADDRESS__) SET_BIT((__HANDLE__)->Instance->CFGR, (__ADDRESS__)<< CEC_CFGR_OAR_LSB_POS) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup CEC_Exported_Functions - * @{ - */ - -/** @addtogroup CEC_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions ****************************/ -HAL_StatusTypeDef HAL_CEC_Init(CEC_HandleTypeDef *hcec); -HAL_StatusTypeDef HAL_CEC_DeInit(CEC_HandleTypeDef *hcec); -void HAL_CEC_MspInit(CEC_HandleTypeDef *hcec); -void HAL_CEC_MspDeInit(CEC_HandleTypeDef *hcec); -/** - * @} - */ - -/** @addtogroup CEC_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions ***************************************************/ -HAL_StatusTypeDef HAL_CEC_Transmit(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_CEC_Receive(CEC_HandleTypeDef *hcec, uint8_t *pData, uint32_t Timeout); -HAL_StatusTypeDef HAL_CEC_Transmit_IT(CEC_HandleTypeDef *hcec, uint8_t DestinationAddress, uint8_t *pData, uint32_t Size); -HAL_StatusTypeDef HAL_CEC_Receive_IT(CEC_HandleTypeDef *hcec, uint8_t *pData); -uint32_t HAL_CEC_GetReceivedFrameSize(CEC_HandleTypeDef *hcec); -void HAL_CEC_IRQHandler(CEC_HandleTypeDef *hcec); -void HAL_CEC_TxCpltCallback(CEC_HandleTypeDef *hcec); -void HAL_CEC_RxCpltCallback(CEC_HandleTypeDef *hcec); -void HAL_CEC_ErrorCallback(CEC_HandleTypeDef *hcec); -/** - * @} - */ - -/** @addtogroup CEC_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State functions ************************************************/ -HAL_CEC_StateTypeDef HAL_CEC_GetState(CEC_HandleTypeDef *hcec); -uint32_t HAL_CEC_GetError(CEC_HandleTypeDef *hcec); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/** @defgroup CEC_Private_Types CEC Private Types - * @{ - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup CEC_Private_Variables CEC Private Variables - * @{ - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup CEC_Private_Constants CEC Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup CEC_Private_Macros CEC Private Macros - * @{ - */ - -#define IS_CEC_SIGNALFREETIME(__SFT__) ((__SFT__) <= CEC_CFGR_SFT) - -#define IS_CEC_TOLERANCE(__RXTOL__) (((__RXTOL__) == CEC_STANDARD_TOLERANCE) || \ - ((__RXTOL__) == CEC_EXTENDED_TOLERANCE)) - -#define IS_CEC_BRERXSTOP(__BRERXSTOP__) (((__BRERXSTOP__) == CEC_NO_RX_STOP_ON_BRE) || \ - ((__BRERXSTOP__) == CEC_RX_STOP_ON_BRE)) - -#define IS_CEC_BREERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_NO_GENERATION) || \ - ((__ERRORBITGEN__) == CEC_BRE_ERRORBIT_GENERATION)) - -#define IS_CEC_LBPEERRORBITGEN(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_NO_GENERATION) || \ - ((__ERRORBITGEN__) == CEC_LBPE_ERRORBIT_GENERATION)) - -#define IS_CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION(__ERRORBITGEN__) (((__ERRORBITGEN__) == CEC_BROADCASTERROR_ERRORBIT_GENERATION) || \ - ((__ERRORBITGEN__) == CEC_BROADCASTERROR_NO_ERRORBIT_GENERATION)) - -#define IS_CEC_SFTOP(__SFTOP__) (((__SFTOP__) == CEC_SFT_START_ON_TXSOM) || \ - ((__SFTOP__) == CEC_SFT_START_ON_TX_RX_END)) - -#define IS_CEC_LISTENING_MODE(__MODE__) (((__MODE__) == CEC_REDUCED_LISTENING_MODE) || \ - ((__MODE__) == CEC_FULL_LISTENING_MODE)) - -/** @brief Check CEC device Own Address Register (OAR) setting. - * OAR address is written in a 15-bit field within CEC_CFGR register. - * @param __ADDRESS__: CEC own address. - * @retval Test result (TRUE or FALSE). - */ -#define IS_CEC_OAR_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0x07FFF) - -/** @brief Check CEC initiator or destination logical address setting. - * Initiator and destination addresses are coded over 4 bits. - * @param __ADDRESS__: CEC initiator or logical address. - * @retval Test result (TRUE or FALSE). - */ -#define IS_CEC_ADDRESS(__ADDRESS__) ((__ADDRESS__) <= 0xF) - -/** @brief Check CEC message size. - * The message size is the payload size: without counting the header, - * it varies from 0 byte (ping operation, one header only, no payload) to - * 15 bytes (1 opcode and up to 14 operands following the header). - * @param __SIZE__: CEC message size. - * @retval Test result (TRUE or FALSE). - */ -#define IS_CEC_MSGSIZE(__SIZE__) ((__SIZE__) <= 0xF) - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup CEC_Private_Functions CEC Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* STM32F446xx */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CEC_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_conf_template.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_conf_template.h deleted file mode 100644 index 005eed7..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_conf_template.h +++ /dev/null @@ -1,427 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_conf_template.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief HAL configuration template file. - * This file should be copied to the application folder and renamed - * to stm32f4xx_hal_conf.h. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CONF_H -#define __STM32F4xx_HAL_CONF_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/* ########################## Module Selection ############################## */ -/** - * @brief This is the list of modules to be used in the HAL driver - */ -#define HAL_MODULE_ENABLED -#define HAL_ADC_MODULE_ENABLED -#define HAL_CAN_MODULE_ENABLED -#define HAL_CRC_MODULE_ENABLED -#define HAL_CEC_MODULE_ENABLED -#define HAL_CRYP_MODULE_ENABLED -#define HAL_DAC_MODULE_ENABLED -#define HAL_DCMI_MODULE_ENABLED -#define HAL_DMA_MODULE_ENABLED -#define HAL_DMA2D_MODULE_ENABLED -#define HAL_ETH_MODULE_ENABLED -#define HAL_FLASH_MODULE_ENABLED -#define HAL_NAND_MODULE_ENABLED -#define HAL_NOR_MODULE_ENABLED -#define HAL_PCCARD_MODULE_ENABLED -#define HAL_SRAM_MODULE_ENABLED -#define HAL_SDRAM_MODULE_ENABLED -#define HAL_HASH_MODULE_ENABLED -#define HAL_GPIO_MODULE_ENABLED -#define HAL_I2C_MODULE_ENABLED -#define HAL_I2S_MODULE_ENABLED -#define HAL_IWDG_MODULE_ENABLED -#define HAL_LTDC_MODULE_ENABLED -#define HAL_PWR_MODULE_ENABLED -#define HAL_QSPI_MODULE_ENABLED -#define HAL_RCC_MODULE_ENABLED -#define HAL_RNG_MODULE_ENABLED -#define HAL_RTC_MODULE_ENABLED -#define HAL_SAI_MODULE_ENABLED -#define HAL_SD_MODULE_ENABLED -#define HAL_SPI_MODULE_ENABLED -#define HAL_TIM_MODULE_ENABLED -#define HAL_UART_MODULE_ENABLED -#define HAL_USART_MODULE_ENABLED -#define HAL_IRDA_MODULE_ENABLED -#define HAL_SMARTCARD_MODULE_ENABLED -#define HAL_WWDG_MODULE_ENABLED -#define HAL_CORTEX_MODULE_ENABLED -#define HAL_PCD_MODULE_ENABLED -#define HAL_HCD_MODULE_ENABLED -#define HAL_FMPI2C_MODULE_ENABLED -#define HAL_SPDIFRX_MODULE_ENABLED - - -/* ########################## HSE/HSI Values adaptation ##################### */ -/** - * @brief Adjust the value of External High Speed oscillator (HSE) used in your application. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSE is used as system clock source, directly or through the PLL). - */ -#if !defined (HSE_VALUE) - #define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */ -#endif /* HSE_VALUE */ - -#if !defined (HSE_STARTUP_TIMEOUT) - #define HSE_STARTUP_TIMEOUT ((uint32_t)5000) /*!< Time out for HSE start up, in ms */ -#endif /* HSE_STARTUP_TIMEOUT */ - -/** - * @brief Internal High Speed oscillator (HSI) value. - * This value is used by the RCC HAL module to compute the system frequency - * (when HSI is used as system clock source, directly or through the PLL). - */ -#if !defined (HSI_VALUE) - #define HSI_VALUE ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/ -#endif /* HSI_VALUE */ - -/** - * @brief Internal Low Speed oscillator (LSI) value. - */ -#if !defined (LSI_VALUE) - #define LSI_VALUE ((uint32_t)32000) /*!< LSI Typical Value in Hz*/ -#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz - The real value may vary depending on the variations - in voltage and temperature.*/ -/** - * @brief External Low Speed oscillator (LSE) value. - */ -#if !defined (LSE_VALUE) - #define LSE_VALUE ((uint32_t)32768) /*!< Value of the External Low Speed oscillator in Hz */ -#endif /* LSE_VALUE */ - -/** - * @brief External clock source for I2S peripheral - * This value is used by the I2S HAL module to compute the I2S clock source - * frequency, this source is inserted directly through I2S_CKIN pad. - */ -#if !defined (EXTERNAL_CLOCK_VALUE) - #define EXTERNAL_CLOCK_VALUE ((uint32_t)12288000) /*!< Value of the Internal oscillator in Hz*/ -#endif /* EXTERNAL_CLOCK_VALUE */ - -/* Tip: To avoid modifying this file each time you need to use different HSE, - === you can define the HSE value in your toolchain compiler preprocessor. */ - -/* ########################### System Configuration ######################### */ -/** - * @brief This is the HAL system configuration section - */ -#define VDD_VALUE ((uint32_t)3300) /*!< Value of VDD in mv */ -#define TICK_INT_PRIORITY ((uint32_t)0x0F) /*!< tick interrupt priority */ -#define USE_RTOS 0 -#define PREFETCH_ENABLE 1 -#define INSTRUCTION_CACHE_ENABLE 1 -#define DATA_CACHE_ENABLE 1 - -/* ########################## Assert Selection ############################## */ -/** - * @brief Uncomment the line below to expanse the "assert_param" macro in the - * HAL drivers code - */ -/* #define USE_FULL_ASSERT 1 */ - -/* ################## Ethernet peripheral configuration ##################### */ - -/* Section 1 : Ethernet peripheral configuration */ - -/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */ -#define MAC_ADDR0 2 -#define MAC_ADDR1 0 -#define MAC_ADDR2 0 -#define MAC_ADDR3 0 -#define MAC_ADDR4 0 -#define MAC_ADDR5 0 - -/* Definition of the Ethernet driver buffers size and count */ -#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */ -#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */ -#define ETH_RXBUFNB ((uint32_t)4) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */ -#define ETH_TXBUFNB ((uint32_t)4) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */ - -/* Section 2: PHY configuration section */ - -/* DP83848 PHY Address*/ -#define DP83848_PHY_ADDRESS 0x01 -/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/ -#define PHY_RESET_DELAY ((uint32_t)0x000000FF) -/* PHY Configuration delay */ -#define PHY_CONFIG_DELAY ((uint32_t)0x00000FFF) - -#define PHY_READ_TO ((uint32_t)0x0000FFFF) -#define PHY_WRITE_TO ((uint32_t)0x0000FFFF) - -/* Section 3: Common PHY Registers */ - -#define PHY_BCR ((uint16_t)0x00) /*!< Transceiver Basic Control Register */ -#define PHY_BSR ((uint16_t)0x01) /*!< Transceiver Basic Status Register */ - -#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */ -#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */ -#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */ -#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */ -#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */ -#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */ -#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */ -#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */ -#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */ -#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */ - -#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */ -#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */ -#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */ - -/* Section 4: Extended PHY Registers */ - -#define PHY_SR ((uint16_t)0x10) /*!< PHY status register Offset */ -#define PHY_MICR ((uint16_t)0x11) /*!< MII Interrupt Control Register */ -#define PHY_MISR ((uint16_t)0x12) /*!< MII Interrupt Status and Misc. Control Register */ - -#define PHY_LINK_STATUS ((uint16_t)0x0001) /*!< PHY Link mask */ -#define PHY_SPEED_STATUS ((uint16_t)0x0002) /*!< PHY Speed mask */ -#define PHY_DUPLEX_STATUS ((uint16_t)0x0004) /*!< PHY Duplex mask */ - -#define PHY_MICR_INT_EN ((uint16_t)0x0002) /*!< PHY Enable interrupts */ -#define PHY_MICR_INT_OE ((uint16_t)0x0001) /*!< PHY Enable output interrupt events */ - -#define PHY_MISR_LINK_INT_EN ((uint16_t)0x0020) /*!< Enable Interrupt on change of link status */ -#define PHY_LINK_INTERRUPT ((uint16_t)0x2000) /*!< PHY link status interrupt mask */ - -/* Includes ------------------------------------------------------------------*/ -/** - * @brief Include module's header file - */ - -#ifdef HAL_RCC_MODULE_ENABLED - #include "stm32f4xx_hal_rcc.h" -#endif /* HAL_RCC_MODULE_ENABLED */ - -#ifdef HAL_GPIO_MODULE_ENABLED - #include "stm32f4xx_hal_gpio.h" -#endif /* HAL_GPIO_MODULE_ENABLED */ - -#ifdef HAL_DMA_MODULE_ENABLED - #include "stm32f4xx_hal_dma.h" -#endif /* HAL_DMA_MODULE_ENABLED */ - -#ifdef HAL_CORTEX_MODULE_ENABLED - #include "stm32f4xx_hal_cortex.h" -#endif /* HAL_CORTEX_MODULE_ENABLED */ - -#ifdef HAL_ADC_MODULE_ENABLED - #include "stm32f4xx_hal_adc.h" -#endif /* HAL_ADC_MODULE_ENABLED */ - -#ifdef HAL_CAN_MODULE_ENABLED - #include "stm32f4xx_hal_can.h" -#endif /* HAL_CAN_MODULE_ENABLED */ - -#ifdef HAL_CRC_MODULE_ENABLED - #include "stm32f4xx_hal_crc.h" -#endif /* HAL_CRC_MODULE_ENABLED */ - -#ifdef HAL_CRYP_MODULE_ENABLED - #include "stm32f4xx_hal_cryp.h" -#endif /* HAL_CRYP_MODULE_ENABLED */ - -#ifdef HAL_DMA2D_MODULE_ENABLED - #include "stm32f4xx_hal_dma2d.h" -#endif /* HAL_DMA2D_MODULE_ENABLED */ - -#ifdef HAL_DAC_MODULE_ENABLED - #include "stm32f4xx_hal_dac.h" -#endif /* HAL_DAC_MODULE_ENABLED */ - -#ifdef HAL_DCMI_MODULE_ENABLED - #include "stm32f4xx_hal_dcmi.h" -#endif /* HAL_DCMI_MODULE_ENABLED */ - -#ifdef HAL_ETH_MODULE_ENABLED - #include "stm32f4xx_hal_eth.h" -#endif /* HAL_ETH_MODULE_ENABLED */ - -#ifdef HAL_FLASH_MODULE_ENABLED - #include "stm32f4xx_hal_flash.h" -#endif /* HAL_FLASH_MODULE_ENABLED */ - -#ifdef HAL_SRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sram.h" -#endif /* HAL_SRAM_MODULE_ENABLED */ - -#ifdef HAL_NOR_MODULE_ENABLED - #include "stm32f4xx_hal_nor.h" -#endif /* HAL_NOR_MODULE_ENABLED */ - -#ifdef HAL_NAND_MODULE_ENABLED - #include "stm32f4xx_hal_nand.h" -#endif /* HAL_NAND_MODULE_ENABLED */ - -#ifdef HAL_PCCARD_MODULE_ENABLED - #include "stm32f4xx_hal_pccard.h" -#endif /* HAL_PCCARD_MODULE_ENABLED */ - -#ifdef HAL_SDRAM_MODULE_ENABLED - #include "stm32f4xx_hal_sdram.h" -#endif /* HAL_SDRAM_MODULE_ENABLED */ - -#ifdef HAL_HASH_MODULE_ENABLED - #include "stm32f4xx_hal_hash.h" -#endif /* HAL_HASH_MODULE_ENABLED */ - -#ifdef HAL_I2C_MODULE_ENABLED - #include "stm32f4xx_hal_i2c.h" -#endif /* HAL_I2C_MODULE_ENABLED */ - -#ifdef HAL_I2S_MODULE_ENABLED - #include "stm32f4xx_hal_i2s.h" -#endif /* HAL_I2S_MODULE_ENABLED */ - -#ifdef HAL_IWDG_MODULE_ENABLED - #include "stm32f4xx_hal_iwdg.h" -#endif /* HAL_IWDG_MODULE_ENABLED */ - -#ifdef HAL_LTDC_MODULE_ENABLED - #include "stm32f4xx_hal_ltdc.h" -#endif /* HAL_LTDC_MODULE_ENABLED */ - -#ifdef HAL_PWR_MODULE_ENABLED - #include "stm32f4xx_hal_pwr.h" -#endif /* HAL_PWR_MODULE_ENABLED */ - -#ifdef HAL_RNG_MODULE_ENABLED - #include "stm32f4xx_hal_rng.h" -#endif /* HAL_RNG_MODULE_ENABLED */ - -#ifdef HAL_RTC_MODULE_ENABLED - #include "stm32f4xx_hal_rtc.h" -#endif /* HAL_RTC_MODULE_ENABLED */ - -#ifdef HAL_SAI_MODULE_ENABLED - #include "stm32f4xx_hal_sai.h" -#endif /* HAL_SAI_MODULE_ENABLED */ - -#ifdef HAL_SD_MODULE_ENABLED - #include "stm32f4xx_hal_sd.h" -#endif /* HAL_SD_MODULE_ENABLED */ - -#ifdef HAL_SPI_MODULE_ENABLED - #include "stm32f4xx_hal_spi.h" -#endif /* HAL_SPI_MODULE_ENABLED */ - -#ifdef HAL_TIM_MODULE_ENABLED - #include "stm32f4xx_hal_tim.h" -#endif /* HAL_TIM_MODULE_ENABLED */ - -#ifdef HAL_UART_MODULE_ENABLED - #include "stm32f4xx_hal_uart.h" -#endif /* HAL_UART_MODULE_ENABLED */ - -#ifdef HAL_USART_MODULE_ENABLED - #include "stm32f4xx_hal_usart.h" -#endif /* HAL_USART_MODULE_ENABLED */ - -#ifdef HAL_IRDA_MODULE_ENABLED - #include "stm32f4xx_hal_irda.h" -#endif /* HAL_IRDA_MODULE_ENABLED */ - -#ifdef HAL_SMARTCARD_MODULE_ENABLED - #include "stm32f4xx_hal_smartcard.h" -#endif /* HAL_SMARTCARD_MODULE_ENABLED */ - -#ifdef HAL_WWDG_MODULE_ENABLED - #include "stm32f4xx_hal_wwdg.h" -#endif /* HAL_WWDG_MODULE_ENABLED */ - -#ifdef HAL_PCD_MODULE_ENABLED - #include "stm32f4xx_hal_pcd.h" -#endif /* HAL_PCD_MODULE_ENABLED */ - -#ifdef HAL_HCD_MODULE_ENABLED - #include "stm32f4xx_hal_hcd.h" -#endif /* HAL_HCD_MODULE_ENABLED */ - -#ifdef HAL_QSPI_MODULE_ENABLED - #include "stm32f4xx_hal_qspi.h" -#endif /* HAL_QSPI_MODULE_ENABLED */ - -#ifdef HAL_CEC_MODULE_ENABLED - #include "stm32f4xx_hal_cec.h" -#endif /* HAL_CEC_MODULE_ENABLED */ - -#ifdef HAL_FMPI2C_MODULE_ENABLED - #include "stm32f4xx_hal_fmpi2c.h" -#endif /* HAL_FMPI2C_MODULE_ENABLED */ - -#ifdef HAL_SPDIFRX_MODULE_ENABLED - #include "stm32f4xx_hal_spdifrx.h" -#endif /* HAL_SPDIFRX_MODULE_ENABLED */ - -/* Exported macro ------------------------------------------------------------*/ -#ifdef USE_FULL_ASSERT -/** - * @brief The assert_param macro is used for function's parameters check. - * @param expr: If expr is false, it calls assert_failed function - * which reports the name of the source file and the source - * line number of the call that failed. - * If expr is true, it returns no value. - * @retval None - */ - #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__)) -/* Exported functions ------------------------------------------------------- */ - void assert_failed(uint8_t* file, uint32_t line); -#else - #define assert_param(expr) ((void)0) -#endif /* USE_FULL_ASSERT */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CONF_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h deleted file mode 100644 index 654804c..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cortex.h +++ /dev/null @@ -1,200 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_cortex.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of CORTEX HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CORTEX_H -#define __STM32F4xx_HAL_CORTEX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup CORTEX - * @{ - */ -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup CORTEX_Exported_Constants CORTEX Exported Constants - * @{ - */ - -/** @defgroup CORTEX_Preemption_Priority_Group CORTEX Preemption Priority Group - * @{ - */ -#define NVIC_PRIORITYGROUP_0 ((uint32_t)0x00000007) /*!< 0 bits for pre-emption priority - 4 bits for subpriority */ -#define NVIC_PRIORITYGROUP_1 ((uint32_t)0x00000006) /*!< 1 bits for pre-emption priority - 3 bits for subpriority */ -#define NVIC_PRIORITYGROUP_2 ((uint32_t)0x00000005) /*!< 2 bits for pre-emption priority - 2 bits for subpriority */ -#define NVIC_PRIORITYGROUP_3 ((uint32_t)0x00000004) /*!< 3 bits for pre-emption priority - 1 bits for subpriority */ -#define NVIC_PRIORITYGROUP_4 ((uint32_t)0x00000003) /*!< 4 bits for pre-emption priority - 0 bits for subpriority */ -/** - * @} - */ - -/** @defgroup CORTEX_SysTick_clock_source CORTEX _SysTick clock source - * @{ - */ -#define SYSTICK_CLKSOURCE_HCLK_DIV8 ((uint32_t)0x00000000) -#define SYSTICK_CLKSOURCE_HCLK ((uint32_t)0x00000004) - -/** - * @} - */ - -/** - * @} - */ - - -/* Exported Macros -----------------------------------------------------------*/ -/** @defgroup CORTEX_Exported_Macros CORTEX Exported Macros - * @{ - */ - -/** @brief Configures the SysTick clock source. - * @param __CLKSRC__: specifies the SysTick clock source. - * This parameter can be one of the following values: - * @arg SYSTICK_CLKSOURCE_HCLK_DIV8: AHB clock divided by 8 selected as SysTick clock source. - * @arg SYSTICK_CLKSOURCE_HCLK: AHB clock selected as SysTick clock source. - * @retval None - */ -#define __HAL_CORTEX_SYSTICKCLK_CONFIG(__CLKSRC__) \ - do { \ - if ((__CLKSRC__) == SYSTICK_CLKSOURCE_HCLK) \ - { \ - SysTick->CTRL |= SYSTICK_CLKSOURCE_HCLK; \ - } \ - else \ - SysTick->CTRL &= ~SYSTICK_CLKSOURCE_HCLK; \ - } while(0) -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup CORTEX_Exported_Functions - * @{ - */ - -/** @addtogroup CORTEX_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions *****************************/ -void HAL_NVIC_SetPriorityGrouping(uint32_t PriorityGroup); -void HAL_NVIC_SetPriority(IRQn_Type IRQn, uint32_t PreemptPriority, uint32_t SubPriority); -void HAL_NVIC_EnableIRQ(IRQn_Type IRQn); -void HAL_NVIC_DisableIRQ(IRQn_Type IRQn); -void HAL_NVIC_SystemReset(void); -uint32_t HAL_SYSTICK_Config(uint32_t TicksNumb); -/** - * @} - */ - -/** @addtogroup CORTEX_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions ***********************************************/ -uint32_t HAL_NVIC_GetPriorityGrouping(void); -void HAL_NVIC_GetPriority(IRQn_Type IRQn, uint32_t PriorityGroup, uint32_t* pPreemptPriority, uint32_t* pSubPriority); -uint32_t HAL_NVIC_GetPendingIRQ(IRQn_Type IRQn); -void HAL_NVIC_SetPendingIRQ(IRQn_Type IRQn); -void HAL_NVIC_ClearPendingIRQ(IRQn_Type IRQn); -uint32_t HAL_NVIC_GetActive(IRQn_Type IRQn); -void HAL_SYSTICK_CLKSourceConfig(uint32_t CLKSource); -void HAL_SYSTICK_IRQHandler(void); -void HAL_SYSTICK_Callback(void); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup CORTEX_Private_Macros CORTEX Private Macros - * @{ - */ -#define IS_NVIC_PRIORITY_GROUP(GROUP) (((GROUP) == NVIC_PRIORITYGROUP_0) || \ - ((GROUP) == NVIC_PRIORITYGROUP_1) || \ - ((GROUP) == NVIC_PRIORITYGROUP_2) || \ - ((GROUP) == NVIC_PRIORITYGROUP_3) || \ - ((GROUP) == NVIC_PRIORITYGROUP_4)) - -#define IS_NVIC_PREEMPTION_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) - -#define IS_NVIC_SUB_PRIORITY(PRIORITY) ((PRIORITY) < 0x10) - -#define IS_NVIC_DEVICE_IRQ(IRQ) ((IRQ) >= 0x00) - -#define IS_SYSTICK_CLK_SOURCE(SOURCE) (((SOURCE) == SYSTICK_CLKSOURCE_HCLK) || \ - ((SOURCE) == SYSTICK_CLKSOURCE_HCLK_DIV8)) -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CORTEX_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_crc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_crc.h deleted file mode 100644 index 550847b..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_crc.h +++ /dev/null @@ -1,249 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_crc.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of CRC HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CRC_H -#define __STM32F4xx_HAL_CRC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup CRC CRC - * @brief CRC HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup CRC_Exported_Types CRC Exported Types - * @{ - */ - -/** @defgroup CRC_Exported_Types_Group1 CRC State Structure definition - * @{ - */ -typedef enum -{ - HAL_CRC_STATE_RESET = 0x00, /*!< CRC not yet initialized or disabled */ - HAL_CRC_STATE_READY = 0x01, /*!< CRC initialized and ready for use */ - HAL_CRC_STATE_BUSY = 0x02, /*!< CRC internal process is ongoing */ - HAL_CRC_STATE_TIMEOUT = 0x03, /*!< CRC timeout state */ - HAL_CRC_STATE_ERROR = 0x04 /*!< CRC error state */ - -}HAL_CRC_StateTypeDef; -/** - * @} - */ - -/** @defgroup CRC_Exported_Types_Group2 CRC Handle Structure definition - * @{ - */ -typedef struct -{ - CRC_TypeDef *Instance; /*!< Register base address */ - - HAL_LockTypeDef Lock; /*!< CRC locking object */ - - __IO HAL_CRC_StateTypeDef State; /*!< CRC communication state */ - -}CRC_HandleTypeDef; -/** - * @} - */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup CRC_Exported_Macros CRC Exported Macros - * @{ - */ - -/** @brief Resets CRC handle state - * @param __HANDLE__: CRC handle - * @retval None - */ -#define __HAL_CRC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRC_STATE_RESET) - -/** - * @brief Resets CRC Data Register. - * @param __HANDLE__: CRC handle - * @retval None - */ -#define __HAL_CRC_DR_RESET(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRC_CR_RESET) - -/** - * @brief Stores a 8-bit data in the Independent Data(ID) register. - * @param __HANDLE__: CRC handle - * @param __VALUE__: 8-bit value to be stored in the ID register - * @retval None - */ -#define __HAL_CRC_SET_IDR(__HANDLE__, __VALUE__) (WRITE_REG((__HANDLE__)->Instance->IDR, (__VALUE__))) - -/** - * @brief Returns the 8-bit data stored in the Independent Data(ID) register. - * @param __HANDLE__: CRC handle - * @retval 8-bit value of the ID register - */ -#define __HAL_CRC_GET_IDR(__HANDLE__) (((__HANDLE__)->Instance->IDR) & CRC_IDR_IDR) -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup CRC_Exported_Functions CRC Exported Functions - * @{ - */ - -/** @defgroup CRC_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ -HAL_StatusTypeDef HAL_CRC_Init(CRC_HandleTypeDef *hcrc); -HAL_StatusTypeDef HAL_CRC_DeInit (CRC_HandleTypeDef *hcrc); -void HAL_CRC_MspInit(CRC_HandleTypeDef *hcrc); -void HAL_CRC_MspDeInit(CRC_HandleTypeDef *hcrc); -/** - * @} - */ - -/** @defgroup CRC_Exported_Functions_Group2 Peripheral Control functions - * @{ - */ -uint32_t HAL_CRC_Accumulate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength); -uint32_t HAL_CRC_Calculate(CRC_HandleTypeDef *hcrc, uint32_t pBuffer[], uint32_t BufferLength); -/** - * @} - */ - -/** @defgroup CRC_Exported_Functions_Group3 Peripheral State functions - * @{ - */ -HAL_CRC_StateTypeDef HAL_CRC_GetState(CRC_HandleTypeDef *hcrc); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/** @defgroup CRC_Private_Types CRC Private Types - * @{ - */ - -/** - * @} - */ - -/* Private defines -----------------------------------------------------------*/ -/** @defgroup CRC_Private_Defines CRC Private Defines - * @{ - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup CRC_Private_Variables CRC Private Variables - * @{ - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup CRC_Private_Constants CRC Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup CRC_Private_Macros CRC Private Macros - * @{ - */ - -/** - * @} - */ - -/* Private functions prototypes ----------------------------------------------*/ -/** @defgroup CRC_Private_Functions_Prototypes CRC Private Functions Prototypes - * @{ - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup CRC_Private_Functions CRC Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CRC_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cryp.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cryp.h deleted file mode 100644 index 69440bb..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cryp.h +++ /dev/null @@ -1,536 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_cryp.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of CRYP HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CRYP_H -#define __STM32F4xx_HAL_CRYP_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup CRYP - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup CRYP_Exported_Types CRYP Exported Types - * @{ - */ - -/** @defgroup CRYP_Exported_Types_Group1 CRYP Configuration Structure definition - * @{ - */ - -typedef struct -{ - uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string. - This parameter can be a value of @ref CRYP CRYP_Data_Type */ - - uint32_t KeySize; /*!< Used only in AES mode only : 128, 192 or 256 bit key length. - This parameter can be a value of @ref CRYP CRYP_Key_Size */ - - uint8_t* pKey; /*!< The key used for encryption/decryption */ - - uint8_t* pInitVect; /*!< The initialization vector used also as initialization - counter in CTR mode */ - - uint8_t IVSize; /*!< The size of initialization vector. - This parameter (called nonce size in CCM) is used only - in AES-128/192/256 encryption/decryption CCM mode */ - - uint8_t TagSize; /*!< The size of returned authentication TAG. - This parameter is used only in AES-128/192/256 - encryption/decryption CCM mode */ - - uint8_t* Header; /*!< The header used in GCM and CCM modes */ - - uint32_t HeaderSize; /*!< The size of header buffer in bytes */ - - uint8_t* pScratch; /*!< Scratch buffer used to append the header. It's size must be equal to header size + 21 bytes. - This parameter is used only in AES-128/192/256 encryption/decryption CCM mode */ -}CRYP_InitTypeDef; - -/** - * @} - */ - -/** @defgroup CRYP_Exported_Types_Group2 CRYP State structures definition - * @{ - */ - - -typedef enum -{ - HAL_CRYP_STATE_RESET = 0x00, /*!< CRYP not yet initialized or disabled */ - HAL_CRYP_STATE_READY = 0x01, /*!< CRYP initialized and ready for use */ - HAL_CRYP_STATE_BUSY = 0x02, /*!< CRYP internal processing is ongoing */ - HAL_CRYP_STATE_TIMEOUT = 0x03, /*!< CRYP timeout state */ - HAL_CRYP_STATE_ERROR = 0x04 /*!< CRYP error state */ -}HAL_CRYP_STATETypeDef; - -/** - * @} - */ - -/** @defgroup CRYP_Exported_Types_Group3 CRYP phase structures definition - * @{ - */ - - -typedef enum -{ - HAL_CRYP_PHASE_READY = 0x01, /*!< CRYP peripheral is ready for initialization. */ - HAL_CRYP_PHASE_PROCESS = 0x02, /*!< CRYP peripheral is in processing phase */ - HAL_CRYP_PHASE_FINAL = 0x03 /*!< CRYP peripheral is in final phase - This is relevant only with CCM and GCM modes */ -}HAL_PhaseTypeDef; - -/** - * @} - */ - -/** @defgroup CRYP_Exported_Types_Group4 CRYP handle Structure definition - * @{ - */ - -typedef struct -{ - CRYP_TypeDef *Instance; /*!< CRYP registers base address */ - - CRYP_InitTypeDef Init; /*!< CRYP required parameters */ - - uint8_t *pCrypInBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */ - - uint8_t *pCrypOutBuffPtr; /*!< Pointer to CRYP processing (encryption, decryption,...) buffer */ - - __IO uint16_t CrypInCount; /*!< Counter of inputed data */ - - __IO uint16_t CrypOutCount; /*!< Counter of outputted data */ - - HAL_StatusTypeDef Status; /*!< CRYP peripheral status */ - - HAL_PhaseTypeDef Phase; /*!< CRYP peripheral phase */ - - DMA_HandleTypeDef *hdmain; /*!< CRYP In DMA handle parameters */ - - DMA_HandleTypeDef *hdmaout; /*!< CRYP Out DMA handle parameters */ - - HAL_LockTypeDef Lock; /*!< CRYP locking object */ - - __IO HAL_CRYP_STATETypeDef State; /*!< CRYP peripheral state */ -}CRYP_HandleTypeDef; - -/** - * @} - */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup CRYP_Exported_Constants CRYP Exported Constants - * @{ - */ - -/** @defgroup CRYP_Exported_Constants_Group1 CRYP CRYP_Key_Size - * @{ - */ -#define CRYP_KEYSIZE_128B ((uint32_t)0x00000000) -#define CRYP_KEYSIZE_192B CRYP_CR_KEYSIZE_0 -#define CRYP_KEYSIZE_256B CRYP_CR_KEYSIZE_1 -/** - * @} - */ - -/** @defgroup CRYP_Exported_Constants_Group2 CRYP CRYP_Data_Type - * @{ - */ -#define CRYP_DATATYPE_32B ((uint32_t)0x00000000) -#define CRYP_DATATYPE_16B CRYP_CR_DATATYPE_0 -#define CRYP_DATATYPE_8B CRYP_CR_DATATYPE_1 -#define CRYP_DATATYPE_1B CRYP_CR_DATATYPE -/** - * @} - */ - -/** @defgroup CRYP_Exported_Constants_Group3 CRYP CRYP_AlgoModeDirection - * @{ - */ -#define CRYP_CR_ALGOMODE_DIRECTION ((uint32_t)0x0008003C) -#define CRYP_CR_ALGOMODE_TDES_ECB_ENCRYPT ((uint32_t)0x00000000) -#define CRYP_CR_ALGOMODE_TDES_ECB_DECRYPT ((uint32_t)0x00000004) -#define CRYP_CR_ALGOMODE_TDES_CBC_ENCRYPT ((uint32_t)0x00000008) -#define CRYP_CR_ALGOMODE_TDES_CBC_DECRYPT ((uint32_t)0x0000000C) -#define CRYP_CR_ALGOMODE_DES_ECB_ENCRYPT ((uint32_t)0x00000010) -#define CRYP_CR_ALGOMODE_DES_ECB_DECRYPT ((uint32_t)0x00000014) -#define CRYP_CR_ALGOMODE_DES_CBC_ENCRYPT ((uint32_t)0x00000018) -#define CRYP_CR_ALGOMODE_DES_CBC_DECRYPT ((uint32_t)0x0000001C) -#define CRYP_CR_ALGOMODE_AES_ECB_ENCRYPT ((uint32_t)0x00000020) -#define CRYP_CR_ALGOMODE_AES_ECB_DECRYPT ((uint32_t)0x00000024) -#define CRYP_CR_ALGOMODE_AES_CBC_ENCRYPT ((uint32_t)0x00000028) -#define CRYP_CR_ALGOMODE_AES_CBC_DECRYPT ((uint32_t)0x0000002C) -#define CRYP_CR_ALGOMODE_AES_CTR_ENCRYPT ((uint32_t)0x00000030) -#define CRYP_CR_ALGOMODE_AES_CTR_DECRYPT ((uint32_t)0x00000034) -/** - * @} - */ - -/** @defgroup CRYP_Exported_Constants_Group4 CRYP CRYP_Interrupt - * @{ - */ -#define CRYP_IT_INI ((uint32_t)CRYP_IMSCR_INIM) /*!< Input FIFO Interrupt */ -#define CRYP_IT_OUTI ((uint32_t)CRYP_IMSCR_OUTIM) /*!< Output FIFO Interrupt */ -/** - * @} - */ - -/** @defgroup CRYP_Exported_Constants_Group5 CRYP CRYP_Flags - * @{ - */ -#define CRYP_FLAG_BUSY ((uint32_t)0x00000010) /*!< The CRYP core is currently - processing a block of data - or a key preparation (for - AES decryption). */ -#define CRYP_FLAG_IFEM ((uint32_t)0x00000001) /*!< Input FIFO is empty */ -#define CRYP_FLAG_IFNF ((uint32_t)0x00000002) /*!< Input FIFO is not Full */ -#define CRYP_FLAG_OFNE ((uint32_t)0x00000004) /*!< Output FIFO is not empty */ -#define CRYP_FLAG_OFFU ((uint32_t)0x00000008) /*!< Output FIFO is Full */ -#define CRYP_FLAG_OUTRIS ((uint32_t)0x01000002) /*!< Output FIFO service raw - interrupt status */ -#define CRYP_FLAG_INRIS ((uint32_t)0x01000001) /*!< Input FIFO service raw - interrupt status */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup CRYP_Exported_Macros CRYP Exported Macros - * @{ - */ - -/** @brief Reset CRYP handle state - * @param __HANDLE__: specifies the CRYP handle. - * @retval None - */ -#define __HAL_CRYP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_CRYP_STATE_RESET) - -/** - * @brief Enable/Disable the CRYP peripheral. - * @param __HANDLE__: specifies the CRYP handle. - * @retval None - */ -#define __HAL_CRYP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRYP_CR_CRYPEN) -#define __HAL_CRYP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~CRYP_CR_CRYPEN) - -/** - * @brief Flush the data FIFO. - * @param __HANDLE__: specifies the CRYP handle. - * @retval None - */ -#define __HAL_CRYP_FIFO_FLUSH(__HANDLE__) ((__HANDLE__)->Instance->CR |= CRYP_CR_FFLUSH) - -/** - * @brief Set the algorithm mode: AES-ECB, AES-CBC, AES-CTR, DES-ECB, DES-CBC. - * @param __HANDLE__: specifies the CRYP handle. - * @param MODE: The algorithm mode. - * @retval None - */ -#define __HAL_CRYP_SET_MODE(__HANDLE__, MODE) ((__HANDLE__)->Instance->CR |= (uint32_t)(MODE)) - -/** @brief Check whether the specified CRYP flag is set or not. - * @param __HANDLE__: specifies the CRYP handle. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg CRYP_FLAG_BUSY: The CRYP core is currently processing a block of data - * or a key preparation (for AES decryption). - * @arg CRYP_FLAG_IFEM: Input FIFO is empty - * @arg CRYP_FLAG_IFNF: Input FIFO is not full - * @arg CRYP_FLAG_INRIS: Input FIFO service raw interrupt is pending - * @arg CRYP_FLAG_OFNE: Output FIFO is not empty - * @arg CRYP_FLAG_OFFU: Output FIFO is full - * @arg CRYP_FLAG_OUTRIS: Input FIFO service raw interrupt is pending - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ - -#define __HAL_CRYP_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 24)) == 0x01)?((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK)): \ - ((((__HANDLE__)->Instance->RISR) & ((__FLAG__) & CRYP_FLAG_MASK)) == ((__FLAG__) & CRYP_FLAG_MASK))) - -/** @brief Check whether the specified CRYP interrupt is set or not. - * @param __HANDLE__: specifies the CRYP handle. - * @param __INTERRUPT__: specifies the interrupt to check. - * This parameter can be one of the following values: - * @arg CRYP_IT_INRIS: Input FIFO service raw interrupt is pending - * @arg CRYP_IT_OUTRIS: Output FIFO service raw interrupt is pending - * @retval The new state of __INTERRUPT__ (TRUE or FALSE). - */ -#define __HAL_CRYP_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->MISR & (__INTERRUPT__)) == (__INTERRUPT__)) - -/** - * @brief Enable the CRYP interrupt. - * @param __HANDLE__: specifies the CRYP handle. - * @param __INTERRUPT__: CRYP Interrupt. - * @retval None - */ -#define __HAL_CRYP_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) |= (__INTERRUPT__)) - -/** - * @brief Disable the CRYP interrupt. - * @param __HANDLE__: specifies the CRYP handle. - * @param __INTERRUPT__: CRYP interrupt. - * @retval None - */ -#define __HAL_CRYP_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->IMSCR) &= ~(__INTERRUPT__)) - -/** - * @} - */ - -/* Include CRYP HAL Extension module */ -#include "stm32f4xx_hal_cryp_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup CRYP_Exported_Functions CRYP Exported Functions - * @{ - */ - -/** @addtogroup CRYP_Exported_Functions_Group1 - * @{ - */ -HAL_StatusTypeDef HAL_CRYP_Init(CRYP_HandleTypeDef *hcryp); -HAL_StatusTypeDef HAL_CRYP_DeInit(CRYP_HandleTypeDef *hcryp); -void HAL_CRYP_MspInit(CRYP_HandleTypeDef *hcryp); -void HAL_CRYP_MspDeInit(CRYP_HandleTypeDef *hcryp); -/** - * @} - */ - -/** @addtogroup CRYP_Exported_Functions_Group2 - * @{ - */ -/* AES encryption/decryption using polling ***********************************/ -HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); -HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout); -HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); -HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout); -HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); -HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout); - -/* AES encryption/decryption using interrupt *********************************/ -HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); -HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); -HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); -HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); -HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); -HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); - -/* AES encryption/decryption using DMA ***************************************/ -HAL_StatusTypeDef HAL_CRYP_AESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); -HAL_StatusTypeDef HAL_CRYP_AESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); -HAL_StatusTypeDef HAL_CRYP_AESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); -HAL_StatusTypeDef HAL_CRYP_AESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); -HAL_StatusTypeDef HAL_CRYP_AESCTR_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); -HAL_StatusTypeDef HAL_CRYP_AESCTR_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); -/** - * @} - */ - -/** @addtogroup CRYP_Exported_Functions_Group3 - * @{ - */ -/* DES encryption/decryption using polling ***********************************/ -HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); -HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); -HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); -HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); - -/* DES encryption/decryption using interrupt *********************************/ -HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); -HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); -HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); -HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); - -/* DES encryption/decryption using DMA ***************************************/ -HAL_StatusTypeDef HAL_CRYP_DESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); -HAL_StatusTypeDef HAL_CRYP_DESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); -HAL_StatusTypeDef HAL_CRYP_DESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); -HAL_StatusTypeDef HAL_CRYP_DESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); -/** - * @} - */ - -/** @addtogroup CRYP_Exported_Functions_Group4 - * @{ - */ -/* TDES encryption/decryption using polling **********************************/ -HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); -HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); -HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout); -HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout); - -/* TDES encryption/decryption using interrupt ********************************/ -HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); -HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); -HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); -HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); - -/* TDES encryption/decryption using DMA **************************************/ -HAL_StatusTypeDef HAL_CRYP_TDESECB_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); -HAL_StatusTypeDef HAL_CRYP_TDESECB_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); -HAL_StatusTypeDef HAL_CRYP_TDESCBC_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); -HAL_StatusTypeDef HAL_CRYP_TDESCBC_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); -/** - * @} - */ - -/** @addtogroup CRYP_Exported_Functions_Group5 - * @{ - */ -void HAL_CRYP_InCpltCallback(CRYP_HandleTypeDef *hcryp); -void HAL_CRYP_OutCpltCallback(CRYP_HandleTypeDef *hcryp); -void HAL_CRYP_ErrorCallback(CRYP_HandleTypeDef *hcryp); -/** - * @} - */ - -/** @addtogroup CRYP_Exported_Functions_Group6 - * @{ - */ -void HAL_CRYP_IRQHandler(CRYP_HandleTypeDef *hcryp); -/** - * @} - */ - -/** @addtogroup CRYP_Exported_Functions_Group7 - * @{ - */ -HAL_CRYP_STATETypeDef HAL_CRYP_GetState(CRYP_HandleTypeDef *hcryp); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/** @defgroup CRYP_Private_Types CRYP Private Types - * @{ - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup CRYP_Private_Variables CRYP Private Variables - * @{ - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup CRYP_Private_Constants CRYP Private Constants - * @{ - */ -#define CRYP_FLAG_MASK ((uint32_t)0x0000001F) -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup CRYP_Private_Macros CRYP Private Macros - * @{ - */ - -#define IS_CRYP_KEYSIZE(__KEYSIZE__) (((__KEYSIZE__) == CRYP_KEYSIZE_128B) || \ - ((__KEYSIZE__) == CRYP_KEYSIZE_192B) || \ - ((__KEYSIZE__) == CRYP_KEYSIZE_256B)) - - -#define IS_CRYP_DATATYPE(__DATATYPE__) (((__DATATYPE__) == CRYP_DATATYPE_32B) || \ - ((__DATATYPE__) == CRYP_DATATYPE_16B) || \ - ((__DATATYPE__) == CRYP_DATATYPE_8B) || \ - ((__DATATYPE__) == CRYP_DATATYPE_1B)) - - - /** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup CRYP_Private_Functions CRYP Private Functions - * @{ - */ - -/** - * @} - */ - -#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CRYP_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cryp_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cryp_ex.h deleted file mode 100644 index 55fc815..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_cryp_ex.h +++ /dev/null @@ -1,221 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_cryp_ex.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of CRYP HAL Extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_CRYP_EX_H -#define __STM32F4xx_HAL_CRYP_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F437xx) || defined(STM32F439xx) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup CRYPEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup CRYPEx_Exported_Constants CRYPEx Exported Constants - * @{ - */ - -/** @defgroup CRYPEx_Exported_Constants_Group1 CRYP AlgoModeDirection - * @{ - */ -#define CRYP_CR_ALGOMODE_AES_GCM_ENCRYPT ((uint32_t)0x00080000) -#define CRYP_CR_ALGOMODE_AES_GCM_DECRYPT ((uint32_t)0x00080004) -#define CRYP_CR_ALGOMODE_AES_CCM_ENCRYPT ((uint32_t)0x00080008) -#define CRYP_CR_ALGOMODE_AES_CCM_DECRYPT ((uint32_t)0x0008000C) - -/** - * @} - */ - -/** @defgroup CRYPEx_Exported_Constants_Group3 CRYP PhaseConfig - * @brief The phases are relevant only to AES-GCM and AES-CCM - * @{ - */ -#define CRYP_PHASE_INIT ((uint32_t)0x00000000) -#define CRYP_PHASE_HEADER CRYP_CR_GCM_CCMPH_0 -#define CRYP_PHASE_PAYLOAD CRYP_CR_GCM_CCMPH_1 -#define CRYP_PHASE_FINAL CRYP_CR_GCM_CCMPH -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup CRYPEx_Exported_Macros CRYP Exported Macros - * @{ - */ - -/** - * @brief Set the phase: Init, header, payload, final. - * This is relevant only for GCM and CCM modes. - * @param __HANDLE__: specifies the CRYP handle. - * @param __PHASE__: The phase. - * @retval None - */ -#define __HAL_CRYP_SET_PHASE(__HANDLE__, __PHASE__) do{(__HANDLE__)->Instance->CR &= (uint32_t)(~CRYP_CR_GCM_CCMPH);\ - (__HANDLE__)->Instance->CR |= (uint32_t)(__PHASE__);\ - }while(0) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup CRYPEx_Exported_Functions CRYPEx Exported Functions - * @{ - */ - -/** @addtogroup CRYPEx_Exported_Functions_Group1 - * @{ - */ - -/* AES encryption/decryption using polling ***********************************/ -HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); -HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout); -HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Finish(CRYP_HandleTypeDef *hcryp, uint32_t Size, uint8_t *AuthTag, uint32_t Timeout); -HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData, uint32_t Timeout); -HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData, uint32_t Timeout); -HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Finish(CRYP_HandleTypeDef *hcryp, uint8_t *AuthTag, uint32_t Timeout); - -/* AES encryption/decryption using interrupt *********************************/ -HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); -HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); -HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); -HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_IT(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); - -/* AES encryption/decryption using DMA ***************************************/ -HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); -HAL_StatusTypeDef HAL_CRYPEx_AESGCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); -HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Encrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pPlainData, uint16_t Size, uint8_t *pCypherData); -HAL_StatusTypeDef HAL_CRYPEx_AESCCM_Decrypt_DMA(CRYP_HandleTypeDef *hcryp, uint8_t *pCypherData, uint16_t Size, uint8_t *pPlainData); - -/** - * @} - */ - -/** @addtogroup CRYPEx_Exported_Functions_Group2 - * @{ - */ - -void HAL_CRYPEx_GCMCCM_IRQHandler(CRYP_HandleTypeDef *hcryp); - -/** - * @} - */ - - /** - * @} - */ - - - /* Private types -------------------------------------------------------------*/ -/** @defgroup CRYPEx_Private_Types CRYPEx Private Types - * @{ - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup CRYPEx_Private_Variables CRYPEx Private Variables - * @{ - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup CRYPEx_Private_Constants CRYPEx Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup CRYPEx_Private_Macros CRYPEx Private Macros - * @{ - */ - - /** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup CRYPEx_Private_Functions CRYPEx Private Functions - * @{ - */ - -/** - * @} - */ - -#endif /* STM32F437xx || STM32F439xx */ -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_CRYP_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac.h deleted file mode 100644 index 30b8cab..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac.h +++ /dev/null @@ -1,412 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dac.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of DAC HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_DAC_H -#define __STM32F4xx_HAL_DAC_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup DAC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup DAC_Exported_Types DAC Exported Types - * @{ - */ - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_DAC_STATE_RESET = 0x00, /*!< DAC not yet initialized or disabled */ - HAL_DAC_STATE_READY = 0x01, /*!< DAC initialized and ready for use */ - HAL_DAC_STATE_BUSY = 0x02, /*!< DAC internal processing is ongoing */ - HAL_DAC_STATE_TIMEOUT = 0x03, /*!< DAC timeout state */ - HAL_DAC_STATE_ERROR = 0x04 /*!< DAC error state */ -}HAL_DAC_StateTypeDef; - -/** - * @brief DAC handle Structure definition - */ -typedef struct -{ - DAC_TypeDef *Instance; /*!< Register base address */ - - __IO HAL_DAC_StateTypeDef State; /*!< DAC communication state */ - - HAL_LockTypeDef Lock; /*!< DAC locking object */ - - DMA_HandleTypeDef *DMA_Handle1; /*!< Pointer DMA handler for channel 1 */ - - DMA_HandleTypeDef *DMA_Handle2; /*!< Pointer DMA handler for channel 2 */ - - __IO uint32_t ErrorCode; /*!< DAC Error code */ - -}DAC_HandleTypeDef; - -/** - * @brief DAC Configuration regular Channel structure definition - */ -typedef struct -{ - uint32_t DAC_Trigger; /*!< Specifies the external trigger for the selected DAC channel. - This parameter can be a value of @ref DAC_trigger_selection */ - - uint32_t DAC_OutputBuffer; /*!< Specifies whether the DAC channel output buffer is enabled or disabled. - This parameter can be a value of @ref DAC_output_buffer */ -}DAC_ChannelConfTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup DAC_Exported_Constants DAC Exported Constants - * @{ - */ - -/** @defgroup DAC_Error_Code DAC Error Code - * @{ - */ -#define HAL_DAC_ERROR_NONE 0x00 /*!< No error */ -#define HAL_DAC_ERROR_DMAUNDERRUNCH1 0x01 /*!< DAC channel1 DAM underrun error */ -#define HAL_DAC_ERROR_DMAUNDERRUNCH2 0x02 /*!< DAC channel2 DAM underrun error */ -#define HAL_DAC_ERROR_DMA 0x04 /*!< DMA error */ -/** - * @} - */ - -/** @defgroup DAC_trigger_selection DAC Trigger Selection - * @{ - */ - -#define DAC_TRIGGER_NONE ((uint32_t)0x00000000) /*!< Conversion is automatic once the DAC1_DHRxxxx register - has been loaded, and not by external trigger */ -#define DAC_TRIGGER_T2_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TEN1)) /*!< TIM2 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_TRIGGER_T4_TRGO ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM4 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_TRIGGER_T5_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM5 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_TRIGGER_T6_TRGO ((uint32_t)DAC_CR_TEN1) /*!< TIM6 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_TRIGGER_T7_TRGO ((uint32_t)(DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< TIM7 TRGO selected as external conversion trigger for DAC channel */ -#define DAC_TRIGGER_T8_TRGO ((uint32_t)(DAC_CR_TSEL1_0 | DAC_CR_TEN1)) /*!< TIM8 TRGO selected as external conversion trigger for DAC channel */ - -#define DAC_TRIGGER_EXT_IT9 ((uint32_t)(DAC_CR_TSEL1_2 | DAC_CR_TSEL1_1 | DAC_CR_TEN1)) /*!< EXTI Line9 event selected as external conversion trigger for DAC channel */ -#define DAC_TRIGGER_SOFTWARE ((uint32_t)(DAC_CR_TSEL1 | DAC_CR_TEN1)) /*!< Conversion started by software trigger for DAC channel */ -/** - * @} - */ - -/** @defgroup DAC_output_buffer DAC Output Buffer - * @{ - */ -#define DAC_OUTPUTBUFFER_ENABLE ((uint32_t)0x00000000) -#define DAC_OUTPUTBUFFER_DISABLE ((uint32_t)DAC_CR_BOFF1) -/** - * @} - */ - -/** @defgroup DAC_Channel_selection DAC Channel Selection - * @{ - */ -#define DAC_CHANNEL_1 ((uint32_t)0x00000000) -#define DAC_CHANNEL_2 ((uint32_t)0x00000010) -/** - * @} - */ - -/** @defgroup DAC_data_alignment DAC Data Alignment - * @{ - */ -#define DAC_ALIGN_12B_R ((uint32_t)0x00000000) -#define DAC_ALIGN_12B_L ((uint32_t)0x00000004) -#define DAC_ALIGN_8B_R ((uint32_t)0x00000008) -/** - * @} - */ - -/** @defgroup DAC_flags_definition DAC Flags Definition - * @{ - */ -#define DAC_FLAG_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1) -#define DAC_FLAG_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2) -/** - * @} - */ - -/** @defgroup DAC_IT_definition DAC IT Definition - * @{ - */ -#define DAC_IT_DMAUDR1 ((uint32_t)DAC_SR_DMAUDR1) -#define DAC_IT_DMAUDR2 ((uint32_t)DAC_SR_DMAUDR2) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup DAC_Exported_Macros DAC Exported Macros - * @{ - */ - -/** @brief Reset DAC handle state - * @param __HANDLE__: specifies the DAC handle. - * @retval None - */ -#define __HAL_DAC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DAC_STATE_RESET) - -/** @brief Enable the DAC channel - * @param __HANDLE__: specifies the DAC handle. - * @param __DAC_Channel__: specifies the DAC channel - * @retval None - */ -#define __HAL_DAC_ENABLE(__HANDLE__, __DAC_Channel__) ((__HANDLE__)->Instance->CR |= (DAC_CR_EN1 << (__DAC_Channel__))) - -/** @brief Disable the DAC channel - * @param __HANDLE__: specifies the DAC handle - * @param __DAC_Channel__: specifies the DAC channel. - * @retval None - */ -#define __HAL_DAC_DISABLE(__HANDLE__, __DAC_Channel__) ((__HANDLE__)->Instance->CR &= ~(DAC_CR_EN1 << (__DAC_Channel__))) - -/** @brief Enable the DAC interrupt - * @param __HANDLE__: specifies the DAC handle - * @param __INTERRUPT__: specifies the DAC interrupt. - * @retval None - */ -#define __HAL_DAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) |= (__INTERRUPT__)) - -/** @brief Disable the DAC interrupt - * @param __HANDLE__: specifies the DAC handle - * @param __INTERRUPT__: specifies the DAC interrupt. - * @retval None - */ -#define __HAL_DAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR) &= ~(__INTERRUPT__)) - -/** @brief Checks if the specified DAC interrupt source is enabled or disabled. - * @param __HANDLE__: DAC handle - * @param __INTERRUPT__: DAC interrupt source to check - * This parameter can be any combination of the following values: - * @arg DAC_IT_DMAUDR1: DAC channel 1 DMA underrun interrupt - * @arg DAC_IT_DMAUDR2: DAC channel 2 DMA underrun interrupt - * @retval State of interruption (SET or RESET) - */ -#define __HAL_DAC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CR & (__INTERRUPT__)) == (__INTERRUPT__)) - -/** @brief Get the selected DAC's flag status. - * @param __HANDLE__: specifies the DAC handle. - * @param __FLAG__: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg DAC_FLAG_DMAUDR1: DMA underrun 1 flag - * @arg DAC_FLAG_DMAUDR2: DMA underrun 2 flag - * @retval None - */ -#define __HAL_DAC_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) - -/** @brief Clear the DAC's flag. - * @param __HANDLE__: specifies the DAC handle. - * @param __FLAG__: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg DAC_FLAG_DMAUDR1: DMA underrun 1 flag - * @arg DAC_FLAG_DMAUDR2: DMA underrun 2 flag - * @retval None - */ -#define __HAL_DAC_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = (__FLAG__)) -/** - * @} - */ - -/* Include DAC HAL Extension module */ -#include "stm32f4xx_hal_dac_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup DAC_Exported_Functions - * @{ - */ - -/** @addtogroup DAC_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions *********************************/ -HAL_StatusTypeDef HAL_DAC_Init(DAC_HandleTypeDef* hdac); -HAL_StatusTypeDef HAL_DAC_DeInit(DAC_HandleTypeDef* hdac); -void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac); -void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac); -/** - * @} - */ - -/** @addtogroup DAC_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions ****************************************************/ -HAL_StatusTypeDef HAL_DAC_Start(DAC_HandleTypeDef* hdac, uint32_t Channel); -HAL_StatusTypeDef HAL_DAC_Stop(DAC_HandleTypeDef* hdac, uint32_t Channel); -HAL_StatusTypeDef HAL_DAC_Start_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t* pData, uint32_t Length, uint32_t Alignment); -HAL_StatusTypeDef HAL_DAC_Stop_DMA(DAC_HandleTypeDef* hdac, uint32_t Channel); -uint32_t HAL_DAC_GetValue(DAC_HandleTypeDef* hdac, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup DAC_Exported_Functions_Group3 - * @{ - */ -/* Peripheral Control functions ***********************************************/ -HAL_StatusTypeDef HAL_DAC_ConfigChannel(DAC_HandleTypeDef* hdac, DAC_ChannelConfTypeDef* sConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_DAC_SetValue(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Alignment, uint32_t Data); -/** - * @} - */ - -/** @addtogroup DAC_Exported_Functions_Group4 - * @{ - */ -/* Peripheral State functions *************************************************/ -HAL_DAC_StateTypeDef HAL_DAC_GetState(DAC_HandleTypeDef* hdac); -void HAL_DAC_IRQHandler(DAC_HandleTypeDef* hdac); -uint32_t HAL_DAC_GetError(DAC_HandleTypeDef *hdac); - -void HAL_DAC_ConvCpltCallbackCh1(DAC_HandleTypeDef* hdac); -void HAL_DAC_ConvHalfCpltCallbackCh1(DAC_HandleTypeDef* hdac); -void HAL_DAC_ErrorCallbackCh1(DAC_HandleTypeDef *hdac); -void HAL_DAC_DMAUnderrunCallbackCh1(DAC_HandleTypeDef *hdac); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup DAC_Private_Constants DAC Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup DAC_Private_Macros DAC Private Macros - * @{ - */ -#define IS_DAC_DATA(DATA) ((DATA) <= 0xFFF0) -#define IS_DAC_ALIGN(ALIGN) (((ALIGN) == DAC_ALIGN_12B_R) || \ - ((ALIGN) == DAC_ALIGN_12B_L) || \ - ((ALIGN) == DAC_ALIGN_8B_R)) -#define IS_DAC_CHANNEL(CHANNEL) (((CHANNEL) == DAC_CHANNEL_1) || \ - ((CHANNEL) == DAC_CHANNEL_2)) -#define IS_DAC_OUTPUT_BUFFER_STATE(STATE) (((STATE) == DAC_OUTPUTBUFFER_ENABLE) || \ - ((STATE) == DAC_OUTPUTBUFFER_DISABLE)) - -#define IS_DAC_TRIGGER(TRIGGER) (((TRIGGER) == DAC_TRIGGER_NONE) || \ - ((TRIGGER) == DAC_TRIGGER_T2_TRGO) || \ - ((TRIGGER) == DAC_TRIGGER_T8_TRGO) || \ - ((TRIGGER) == DAC_TRIGGER_T7_TRGO) || \ - ((TRIGGER) == DAC_TRIGGER_T5_TRGO) || \ - ((TRIGGER) == DAC_TRIGGER_T6_TRGO) || \ - ((TRIGGER) == DAC_TRIGGER_T4_TRGO) || \ - ((TRIGGER) == DAC_TRIGGER_EXT_IT9) || \ - ((TRIGGER) == DAC_TRIGGER_SOFTWARE)) - -/** @brief Set DHR12R1 alignment - * @param __ALIGNMENT__: specifies the DAC alignment - * @retval None - */ -#define DAC_DHR12R1_ALIGNMENT(__ALIGNMENT__) (((uint32_t)0x00000008) + (__ALIGNMENT__)) - -/** @brief Set DHR12R2 alignment - * @param __ALIGNMENT__: specifies the DAC alignment - * @retval None - */ -#define DAC_DHR12R2_ALIGNMENT(__ALIGNMENT__) (((uint32_t)0x00000014) + (__ALIGNMENT__)) - -/** @brief Set DHR12RD alignment - * @param __ALIGNMENT__: specifies the DAC alignment - * @retval None - */ -#define DAC_DHR12RD_ALIGNMENT(__ALIGNMENT__) (((uint32_t)0x00000020) + (__ALIGNMENT__)) - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup DAC_Private_Functions DAC Private Functions - * @{ - */ -/** - * @} - */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\ - STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\ - STM32F446xx */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F4xx_HAL_DAC_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac_ex.h deleted file mode 100644 index d4feea1..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dac_ex.h +++ /dev/null @@ -1,199 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dac.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of DAC HAL Extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_DAC_EX_H -#define __STM32F4xx_HAL_DAC_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup DACEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup DACEx_Exported_Constants DAC Exported Constants - * @{ - */ - -/** @defgroup DACEx_lfsrunmask_triangleamplitude DAC LFS Run Mask Triangle Amplitude - * @{ - */ -#define DAC_LFSRUNMASK_BIT0 ((uint32_t)0x00000000) /*!< Unmask DAC channel LFSR bit0 for noise wave generation */ -#define DAC_LFSRUNMASK_BITS1_0 ((uint32_t)DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[1:0] for noise wave generation */ -#define DAC_LFSRUNMASK_BITS2_0 ((uint32_t)DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[2:0] for noise wave generation */ -#define DAC_LFSRUNMASK_BITS3_0 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0)/*!< Unmask DAC channel LFSR bit[3:0] for noise wave generation */ -#define DAC_LFSRUNMASK_BITS4_0 ((uint32_t)DAC_CR_MAMP1_2) /*!< Unmask DAC channel LFSR bit[4:0] for noise wave generation */ -#define DAC_LFSRUNMASK_BITS5_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[5:0] for noise wave generation */ -#define DAC_LFSRUNMASK_BITS6_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[6:0] for noise wave generation */ -#define DAC_LFSRUNMASK_BITS7_0 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[7:0] for noise wave generation */ -#define DAC_LFSRUNMASK_BITS8_0 ((uint32_t)DAC_CR_MAMP1_3) /*!< Unmask DAC channel LFSR bit[8:0] for noise wave generation */ -#define DAC_LFSRUNMASK_BITS9_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[9:0] for noise wave generation */ -#define DAC_LFSRUNMASK_BITS10_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Unmask DAC channel LFSR bit[10:0] for noise wave generation */ -#define DAC_LFSRUNMASK_BITS11_0 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Unmask DAC channel LFSR bit[11:0] for noise wave generation */ -#define DAC_TRIANGLEAMPLITUDE_1 ((uint32_t)0x00000000) /*!< Select max triangle amplitude of 1 */ -#define DAC_TRIANGLEAMPLITUDE_3 ((uint32_t)DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 3 */ -#define DAC_TRIANGLEAMPLITUDE_7 ((uint32_t)DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 7 */ -#define DAC_TRIANGLEAMPLITUDE_15 ((uint32_t)DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 15 */ -#define DAC_TRIANGLEAMPLITUDE_31 ((uint32_t)DAC_CR_MAMP1_2) /*!< Select max triangle amplitude of 31 */ -#define DAC_TRIANGLEAMPLITUDE_63 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 63 */ -#define DAC_TRIANGLEAMPLITUDE_127 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 127 */ -#define DAC_TRIANGLEAMPLITUDE_255 ((uint32_t)DAC_CR_MAMP1_2 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 255 */ -#define DAC_TRIANGLEAMPLITUDE_511 ((uint32_t)DAC_CR_MAMP1_3) /*!< Select max triangle amplitude of 511 */ -#define DAC_TRIANGLEAMPLITUDE_1023 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 1023 */ -#define DAC_TRIANGLEAMPLITUDE_2047 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1) /*!< Select max triangle amplitude of 2047 */ -#define DAC_TRIANGLEAMPLITUDE_4095 ((uint32_t)DAC_CR_MAMP1_3 | DAC_CR_MAMP1_1 | DAC_CR_MAMP1_0) /*!< Select max triangle amplitude of 4095 */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup DACEx_Exported_Functions - * @{ - */ - -/** @addtogroup DACEx_Exported_Functions_Group1 - * @{ - */ -/* Extension features functions ***********************************************/ -uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac); -HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude); -HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude); -HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2); - -void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac); -void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac); -void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef* hdac); -void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef* hdac); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup DACEx_Private_Constants DAC Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup DACEx_Private_Macros DAC Private Macros - * @{ - */ -#define IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(VALUE) (((VALUE) == DAC_LFSRUNMASK_BIT0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS1_0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS2_0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS3_0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS4_0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS5_0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS6_0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS7_0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS8_0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS9_0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS10_0) || \ - ((VALUE) == DAC_LFSRUNMASK_BITS11_0) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_1) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_3) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_7) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_15) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_31) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_63) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_127) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_255) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_511) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_1023) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_2047) || \ - ((VALUE) == DAC_TRIANGLEAMPLITUDE_4095)) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup DACEx_Private_Functions DAC Private Functions - * @{ - */ -void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma); -void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma); -void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma); -/** - * @} - */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\ - STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\ - STM32F446xx */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F4xx_HAL_DAC_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi.h deleted file mode 100644 index 890da27..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi.h +++ /dev/null @@ -1,515 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dcmi.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of DCMI HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_DCMI_H -#define __STM32F4xx_HAL_DCMI_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\ - defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/* Include DCMI HAL Extended module */ -/* (include on top of file since DCMI structures are defined in extended file) */ -#include "stm32f4xx_hal_dcmi_ex.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup DCMI DCMI - * @brief DCMI HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup DCMI_Exported_Types DCMI Exported Types - * @{ - */ -/** - * @brief DCMI Error source - */ -typedef enum -{ - DCMI_ERROR_SYNC = 1, /*!< Synchronisation error */ - DCMI_OVERRUN = 2, /*!< DCMI Overrun */ -}DCMI_ErrorTypeDef; - - -/** - * @brief HAL DCMI State structures definition - */ -typedef enum -{ - HAL_DCMI_STATE_RESET = 0x00, /*!< DCMI not yet initialized or disabled */ - HAL_DCMI_STATE_READY = 0x01, /*!< DCMI initialized and ready for use */ - HAL_DCMI_STATE_BUSY = 0x02, /*!< DCMI internal processing is ongoing */ - HAL_DCMI_STATE_TIMEOUT = 0x03, /*!< DCMI timeout state */ - HAL_DCMI_STATE_ERROR = 0x04 /*!< DCMI error state */ -}HAL_DCMI_StateTypeDef; - -/** - * @brief DCMI handle Structure definition - */ -typedef struct -{ - DCMI_TypeDef *Instance; /*!< DCMI Register base address */ - - DCMI_InitTypeDef Init; /*!< DCMI parameters */ - - HAL_LockTypeDef Lock; /*!< DCMI locking object */ - - __IO HAL_DCMI_StateTypeDef State; /*!< DCMI state */ - - __IO uint32_t XferCount; /*!< DMA transfer counter */ - - __IO uint32_t XferSize; /*!< DMA transfer size */ - - uint32_t XferTransferNumber; /*!< DMA transfer number */ - - uint32_t pBuffPtr; /*!< Pointer to DMA output buffer */ - - DMA_HandleTypeDef *DMA_Handle; /*!< Pointer to the DMA handler */ - - __IO uint32_t ErrorCode; /*!< DCMI Error code */ - -}DCMI_HandleTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup DCMI_Exported_Constants DCMI Exported Constants - * @{ - */ - -/** @defgroup DCMI_Error_Code DCMI Error Code - * @{ - */ -#define HAL_DCMI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ -#define HAL_DCMI_ERROR_OVF ((uint32_t)0x00000001) /*!< Overflow error */ -#define HAL_DCMI_ERROR_SYNC ((uint32_t)0x00000002) /*!< Synchronization error */ -#define HAL_DCMI_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */ -/** - * @} - */ - -/** @defgroup DCMI_Capture_Mode DCMI Capture Mode - * @{ - */ -#define DCMI_MODE_CONTINUOUS ((uint32_t)0x00000000) /*!< The received data are transferred continuously - into the destination memory through the DMA */ -#define DCMI_MODE_SNAPSHOT ((uint32_t)DCMI_CR_CM) /*!< Once activated, the interface waits for the start of - frame and then transfers a single frame through the DMA */ -/** - * @} - */ - -/** @defgroup DCMI_Synchronization_Mode DCMI Synchronization Mode - * @{ - */ -#define DCMI_SYNCHRO_HARDWARE ((uint32_t)0x00000000) /*!< Hardware synchronization data capture (frame/line start/stop) - is synchronized with the HSYNC/VSYNC signals */ -#define DCMI_SYNCHRO_EMBEDDED ((uint32_t)DCMI_CR_ESS) /*!< Embedded synchronization data capture is synchronized with - synchronization codes embedded in the data flow */ - -/** - * @} - */ - -/** @defgroup DCMI_PIXCK_Polarity DCMI PIXCK Polarity - * @{ - */ -#define DCMI_PCKPOLARITY_FALLING ((uint32_t)0x00000000) /*!< Pixel clock active on Falling edge */ -#define DCMI_PCKPOLARITY_RISING ((uint32_t)DCMI_CR_PCKPOL) /*!< Pixel clock active on Rising edge */ - -/** - * @} - */ - -/** @defgroup DCMI_VSYNC_Polarity DCMI VSYNC Polarity - * @{ - */ -#define DCMI_VSPOLARITY_LOW ((uint32_t)0x00000000) /*!< Vertical synchronization active Low */ -#define DCMI_VSPOLARITY_HIGH ((uint32_t)DCMI_CR_VSPOL) /*!< Vertical synchronization active High */ - -/** - * @} - */ - -/** @defgroup DCMI_HSYNC_Polarity DCMI HSYNC Polarity - * @{ - */ -#define DCMI_HSPOLARITY_LOW ((uint32_t)0x00000000) /*!< Horizontal synchronization active Low */ -#define DCMI_HSPOLARITY_HIGH ((uint32_t)DCMI_CR_HSPOL) /*!< Horizontal synchronization active High */ - -/** - * @} - */ - -/** @defgroup DCMI_MODE_JPEG DCMI MODE JPEG - * @{ - */ -#define DCMI_JPEG_DISABLE ((uint32_t)0x00000000) /*!< Mode JPEG Disabled */ -#define DCMI_JPEG_ENABLE ((uint32_t)DCMI_CR_JPEG) /*!< Mode JPEG Enabled */ - -/** - * @} - */ - -/** @defgroup DCMI_Capture_Rate DCMI Capture Rate - * @{ - */ -#define DCMI_CR_ALL_FRAME ((uint32_t)0x00000000) /*!< All frames are captured */ -#define DCMI_CR_ALTERNATE_2_FRAME ((uint32_t)DCMI_CR_FCRC_0) /*!< Every alternate frame captured */ -#define DCMI_CR_ALTERNATE_4_FRAME ((uint32_t)DCMI_CR_FCRC_1) /*!< One frame in 4 frames captured */ - -/** - * @} - */ - -/** @defgroup DCMI_Extended_Data_Mode DCMI Extended Data Mode - * @{ - */ -#define DCMI_EXTEND_DATA_8B ((uint32_t)0x00000000) /*!< Interface captures 8-bit data on every pixel clock */ -#define DCMI_EXTEND_DATA_10B ((uint32_t)DCMI_CR_EDM_0) /*!< Interface captures 10-bit data on every pixel clock */ -#define DCMI_EXTEND_DATA_12B ((uint32_t)DCMI_CR_EDM_1) /*!< Interface captures 12-bit data on every pixel clock */ -#define DCMI_EXTEND_DATA_14B ((uint32_t)(DCMI_CR_EDM_0 | DCMI_CR_EDM_1)) /*!< Interface captures 14-bit data on every pixel clock */ - -/** - * @} - */ - -/** @defgroup DCMI_Window_Coordinate DCMI Window Coordinate - * @{ - */ -#define DCMI_WINDOW_COORDINATE ((uint32_t)0x3FFF) /*!< Window coordinate */ - -/** - * @} - */ - -/** @defgroup DCMI_Window_Height DCMI Window Height - * @{ - */ -#define DCMI_WINDOW_HEIGHT ((uint32_t)0x1FFF) /*!< Window Height */ - -/** - * @} - */ - -/** @defgroup DCMI_interrupt_sources DCMI interrupt sources - * @{ - */ -#define DCMI_IT_FRAME ((uint32_t)DCMI_IER_FRAME_IE) -#define DCMI_IT_OVF ((uint32_t)DCMI_IER_OVF_IE) -#define DCMI_IT_ERR ((uint32_t)DCMI_IER_ERR_IE) -#define DCMI_IT_VSYNC ((uint32_t)DCMI_IER_VSYNC_IE) -#define DCMI_IT_LINE ((uint32_t)DCMI_IER_LINE_IE) -/** - * @} - */ - -/** @defgroup DCMI_Flags DCMI Flags - * @{ - */ - -/** - * @brief DCMI SR register - */ -#define DCMI_FLAG_HSYNC ((uint32_t)0x2001) -#define DCMI_FLAG_VSYNC ((uint32_t)0x2002) -#define DCMI_FLAG_FNE ((uint32_t)0x2004) -/** - * @brief DCMI RISR register - */ -#define DCMI_FLAG_FRAMERI ((uint32_t)DCMI_RISR_FRAME_RIS) -#define DCMI_FLAG_OVFRI ((uint32_t)DCMI_RISR_OVF_RIS) -#define DCMI_FLAG_ERRRI ((uint32_t)DCMI_RISR_ERR_RIS) -#define DCMI_FLAG_VSYNCRI ((uint32_t)DCMI_RISR_VSYNC_RIS) -#define DCMI_FLAG_LINERI ((uint32_t)DCMI_RISR_LINE_RIS) -/** - * @brief DCMI MISR register - */ -#define DCMI_FLAG_FRAMEMI ((uint32_t)0x1001) -#define DCMI_FLAG_OVFMI ((uint32_t)0x1002) -#define DCMI_FLAG_ERRMI ((uint32_t)0x1004) -#define DCMI_FLAG_VSYNCMI ((uint32_t)0x1008) -#define DCMI_FLAG_LINEMI ((uint32_t)0x1010) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup DCMI_Exported_Macros DCMI Exported Macros - * @{ - */ - -/** @brief Reset DCMI handle state - * @param __HANDLE__: specifies the DCMI handle. - * @retval None - */ -#define __HAL_DCMI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DCMI_STATE_RESET) - -/** - * @brief Enable the DCMI. - * @param __HANDLE__: DCMI handle - * @retval None - */ -#define __HAL_DCMI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DCMI_CR_ENABLE) - -/** - * @brief Disable the DCMI. - * @param __HANDLE__: DCMI handle - * @retval None - */ -#define __HAL_DCMI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(DCMI_CR_ENABLE)) - -/* Interrupt & Flag management */ -/** - * @brief Get the DCMI pending flags. - * @param __HANDLE__: DCMI handle - * @param __FLAG__: Get the specified flag. - * This parameter can be any combination of the following values: - * @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask - * @arg DCMI_FLAG_OVFRI: Overflow flag mask - * @arg DCMI_FLAG_ERRRI: Synchronization error flag mask - * @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask - * @arg DCMI_FLAG_LINERI: Line flag mask - * @retval The state of FLAG. - */ -#define __HAL_DCMI_GET_FLAG(__HANDLE__, __FLAG__)\ -((((__FLAG__) & 0x3000) == 0x0)? ((__HANDLE__)->Instance->RISR & (__FLAG__)) :\ - (((__FLAG__) & 0x2000) == 0x0)? ((__HANDLE__)->Instance->MISR & (__FLAG__)) : ((__HANDLE__)->Instance->SR & (__FLAG__))) - -/** - * @brief Clear the DCMI pending flags. - * @param __HANDLE__: DCMI handle - * @param __FLAG__: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg DCMI_FLAG_FRAMERI: Frame capture complete flag mask - * @arg DCMI_FLAG_OVFRI: Overflow flag mask - * @arg DCMI_FLAG_ERRRI: Synchronization error flag mask - * @arg DCMI_FLAG_VSYNCRI: VSYNC flag mask - * @arg DCMI_FLAG_LINERI: Line flag mask - * @retval None - */ -#define __HAL_DCMI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) - -/** - * @brief Enable the specified DCMI interrupts. - * @param __HANDLE__: DCMI handle - * @param __INTERRUPT__: specifies the DCMI interrupt sources to be enabled. - * This parameter can be any combination of the following values: - * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask - * @arg DCMI_IT_OVF: Overflow interrupt mask - * @arg DCMI_IT_ERR: Synchronization error interrupt mask - * @arg DCMI_IT_VSYNC: VSYNC interrupt mask - * @arg DCMI_IT_LINE: Line interrupt mask - * @retval None - */ -#define __HAL_DCMI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) - -/** - * @brief Disable the specified DCMI interrupts. - * @param __HANDLE__: DCMI handle - * @param __INTERRUPT__: specifies the DCMI interrupt sources to be enabled. - * This parameter can be any combination of the following values: - * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask - * @arg DCMI_IT_OVF: Overflow interrupt mask - * @arg DCMI_IT_ERR: Synchronization error interrupt mask - * @arg DCMI_IT_VSYNC: VSYNC interrupt mask - * @arg DCMI_IT_LINE: Line interrupt mask - * @retval None - */ -#define __HAL_DCMI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__)) - -/** - * @brief Check whether the specified DCMI interrupt has occurred or not. - * @param __HANDLE__: DCMI handle - * @param __INTERRUPT__: specifies the DCMI interrupt source to check. - * This parameter can be one of the following values: - * @arg DCMI_IT_FRAME: Frame capture complete interrupt mask - * @arg DCMI_IT_OVF: Overflow interrupt mask - * @arg DCMI_IT_ERR: Synchronization error interrupt mask - * @arg DCMI_IT_VSYNC: VSYNC interrupt mask - * @arg DCMI_IT_LINE: Line interrupt mask - * @retval The state of INTERRUPT. - */ -#define __HAL_DCMI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MISR & (__INTERRUPT__)) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup DCMI_Exported_Functions - * @{ - */ - -/** @addtogroup DCMI_Exported_Functions_Group1 - * @{ - */ - -/* Initialization and de-initialization functions *****************************/ -HAL_StatusTypeDef HAL_DCMI_Init(DCMI_HandleTypeDef *hdcmi); -HAL_StatusTypeDef HAL_DCMI_DeInit(DCMI_HandleTypeDef *hdcmi); -void HAL_DCMI_MspInit(DCMI_HandleTypeDef* hdcmi); -void HAL_DCMI_MspDeInit(DCMI_HandleTypeDef* hdcmi); -/** - * @} - */ - -/** @addtogroup DCMI_Exported_Functions_Group2 - * @{ - */ - -/* IO operation functions *****************************************************/ -HAL_StatusTypeDef HAL_DCMI_Start_DMA(DCMI_HandleTypeDef* hdcmi, uint32_t DCMI_Mode, uint32_t pData, uint32_t Length); -HAL_StatusTypeDef HAL_DCMI_Stop(DCMI_HandleTypeDef* hdcmi); -void HAL_DCMI_ErrorCallback(DCMI_HandleTypeDef *hdcmi); -void HAL_DCMI_LineEventCallback(DCMI_HandleTypeDef *hdcmi); -void HAL_DCMI_FrameEventCallback(DCMI_HandleTypeDef *hdcmi); -void HAL_DCMI_VsyncEventCallback(DCMI_HandleTypeDef *hdcmi); -void HAL_DCMI_IRQHandler(DCMI_HandleTypeDef *hdcmi); -/** - * @} - */ - -/** @addtogroup DCMI_Exported_Functions_Group3 - * @{ - */ -/* Peripheral Control functions ***********************************************/ -HAL_StatusTypeDef HAL_DCMI_ConfigCROP(DCMI_HandleTypeDef *hdcmi, uint32_t X0, uint32_t Y0, uint32_t XSize, uint32_t YSize); -HAL_StatusTypeDef HAL_DCMI_EnableCROP(DCMI_HandleTypeDef *hdcmi); -HAL_StatusTypeDef HAL_DCMI_DisableCROP(DCMI_HandleTypeDef *hdcmi); -/** - * @} - */ - -/** @addtogroup DCMI_Exported_Functions_Group4 - * @{ - */ -/* Peripheral State functions *************************************************/ -HAL_DCMI_StateTypeDef HAL_DCMI_GetState(DCMI_HandleTypeDef *hdcmi); -uint32_t HAL_DCMI_GetError(DCMI_HandleTypeDef *hdcmi); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ -/** @defgroup DCMI_Private_Macros DCMI Private Macros - * @{ - */ -#define IS_DCMI_CAPTURE_MODE(MODE)(((MODE) == DCMI_MODE_CONTINUOUS) || \ - ((MODE) == DCMI_MODE_SNAPSHOT)) - -#define IS_DCMI_SYNCHRO(MODE)(((MODE) == DCMI_SYNCHRO_HARDWARE) || \ - ((MODE) == DCMI_SYNCHRO_EMBEDDED)) - -#define IS_DCMI_PCKPOLARITY(POLARITY)(((POLARITY) == DCMI_PCKPOLARITY_FALLING) || \ - ((POLARITY) == DCMI_PCKPOLARITY_RISING)) - -#define IS_DCMI_VSPOLARITY(POLARITY)(((POLARITY) == DCMI_VSPOLARITY_LOW) || \ - ((POLARITY) == DCMI_VSPOLARITY_HIGH)) - -#define IS_DCMI_HSPOLARITY(POLARITY)(((POLARITY) == DCMI_HSPOLARITY_LOW) || \ - ((POLARITY) == DCMI_HSPOLARITY_HIGH)) - -#define IS_DCMI_MODE_JPEG(JPEG_MODE)(((JPEG_MODE) == DCMI_JPEG_DISABLE) || \ - ((JPEG_MODE) == DCMI_JPEG_ENABLE)) - -#define IS_DCMI_CAPTURE_RATE(RATE) (((RATE) == DCMI_CR_ALL_FRAME) || \ - ((RATE) == DCMI_CR_ALTERNATE_2_FRAME) || \ - ((RATE) == DCMI_CR_ALTERNATE_4_FRAME)) - -#define IS_DCMI_EXTENDED_DATA(DATA)(((DATA) == DCMI_EXTEND_DATA_8B) || \ - ((DATA) == DCMI_EXTEND_DATA_10B) || \ - ((DATA) == DCMI_EXTEND_DATA_12B) || \ - ((DATA) == DCMI_EXTEND_DATA_14B)) - -#define IS_DCMI_WINDOW_COORDINATE(COORDINATE) ((COORDINATE) <= DCMI_WINDOW_COORDINATE) - -#define IS_DCMI_WINDOW_HEIGHT(HEIGHT) ((HEIGHT) <= DCMI_WINDOW_HEIGHT) - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @addtogroup DCMI_Private_Functions DCMI Private Functions - * @{ - */ - -/** - * @} - */ - -#endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\ - STM32F429xx || STM32F439xx || STM32F446xx */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_DCMI_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi_ex.h deleted file mode 100644 index 0a9feb8..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dcmi_ex.h +++ /dev/null @@ -1,221 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dcmi_ex.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of DCMI Extension HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_DCMI_EX_H -#define __STM32F4xx_HAL_DCMI_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\ - defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup DCMIEx DCMI Extended - * @brief DCMI HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup DCMIEx_Exported_Types DCMI Extende Exported Types - * @{ - */ -/** - * @brief DCMIEx Embedded Synchronisation CODE Init structure definition - */ -typedef struct -{ - uint8_t FrameStartCode; /*!< Specifies the code of the frame start delimiter. */ - uint8_t LineStartCode; /*!< Specifies the code of the line start delimiter. */ - uint8_t LineEndCode; /*!< Specifies the code of the line end delimiter. */ - uint8_t FrameEndCode; /*!< Specifies the code of the frame end delimiter. */ -}DCMI_CodesInitTypeDef; - -/** - * @brief DCMI Init structure definition - */ -typedef struct -{ - uint32_t SynchroMode; /*!< Specifies the Synchronization Mode: Hardware or Embedded. - This parameter can be a value of @ref DCMI_Synchronization_Mode */ - - uint32_t PCKPolarity; /*!< Specifies the Pixel clock polarity: Falling or Rising. - This parameter can be a value of @ref DCMI_PIXCK_Polarity */ - - uint32_t VSPolarity; /*!< Specifies the Vertical synchronization polarity: High or Low. - This parameter can be a value of @ref DCMI_VSYNC_Polarity */ - - uint32_t HSPolarity; /*!< Specifies the Horizontal synchronization polarity: High or Low. - This parameter can be a value of @ref DCMI_HSYNC_Polarity */ - - uint32_t CaptureRate; /*!< Specifies the frequency of frame capture: All, 1/2 or 1/4. - This parameter can be a value of @ref DCMI_Capture_Rate */ - - uint32_t ExtendedDataMode; /*!< Specifies the data width: 8-bit, 10-bit, 12-bit or 14-bit. - This parameter can be a value of @ref DCMI_Extended_Data_Mode */ - - DCMI_CodesInitTypeDef SyncroCode; /*!< Specifies the code of the frame start delimiter. */ - - uint32_t JPEGMode; /*!< Enable or Disable the JPEG mode. - This parameter can be a value of @ref DCMI_MODE_JPEG */ -#if defined(STM32F446xx) - uint32_t ByteSelectMode; /*!< Specifies the data to be captured by the interface - This parameter can be a value of @ref DCMIEx_Byte_Select_Mode */ - - uint32_t ByteSelectStart; /*!< Specifies if the data to be captured by the interface is even or odd - This parameter can be a value of @ref DCMIEx_Byte_Select_Start */ - - uint32_t LineSelectMode; /*!< Specifies the line of data to be captured by the interface - This parameter can be a value of @ref DCMIEx_Line_Select_Mode */ - - uint32_t LineSelectStart; /*!< Specifies if the line of data to be captured by the interface is even or odd - This parameter can be a value of @ref DCMIEx_Line_Select_Start */ - -#endif /* STM32F446xx */ -}DCMI_InitTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -#if defined(STM32F446xx) -/** @defgroup DCMIEx_Exported_Constants DCMI Exported Constants - * @{ - */ - -/** @defgroup DCMIEx_Byte_Select_Mode DCMI Byte Select Mode - * @{ - */ -#define DCMI_BSM_ALL ((uint32_t)0x00000000) /*!< Interface captures all received data */ -#define DCMI_BSM_OTHER ((uint32_t)DCMI_CR_BSM_0) /*!< Interface captures every other byte from the received data */ -#define DCMI_BSM_ALTERNATE_4 ((uint32_t)DCMI_CR_BSM_1) /*!< Interface captures one byte out of four */ -#define DCMI_BSM_ALTERNATE_2 ((uint32_t)(DCMI_CR_BSM_0 | DCMI_CR_BSM_1)) /*!< Interface captures two bytes out of four */ - -/** - * @} - */ - -/** @defgroup DCMIEx_Byte_Select_Start DCMI Byte Select Start - * @{ - */ -#define DCMI_OEBS_ODD ((uint32_t)0x00000000) /*!< Interface captures first data from the frame/line start, second one being dropped */ -#define DCMI_OEBS_EVEN ((uint32_t)DCMI_CR_OEBS) /*!< Interface captures second data from the frame/line start, first one being dropped */ - -/** - * @} - */ - -/** @defgroup DCMIEx_Line_Select_Mode DCMI Line Select Mode - * @{ - */ -#define DCMI_LSM_ALL ((uint32_t)0x00000000) /*!< Interface captures all received lines */ -#define DCMI_LSM_ALTERNATE_2 ((uint32_t)DCMI_CR_LSM) /*!< Interface captures one line out of two */ - -/** - * @} - */ - -/** @defgroup DCMIEx_Line_Select_Start DCMI Line Select Start - * @{ - */ -#define DCMI_OELS_ODD ((uint32_t)0x00000000) /*!< Interface captures first line from the frame start, second one being dropped */ -#define DCMI_OELS_EVEN ((uint32_t)DCMI_CR_OELS) /*!< Interface captures second line from the frame start, first one being dropped */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macro -------------------------------------------------------------*/ - -/** @defgroup DCMIEx_Private_Macros DCMI Extended Private Macros - * @{ - */ -#define IS_DCMI_BYTE_SELECT_MODE(MODE)(((MODE) == DCMI_BSM_ALL) || \ - ((MODE) == DCMI_BSM_OTHER) || \ - ((MODE) == DCMI_BSM_ALTERNATE_4) || \ - ((MODE) == DCMI_BSM_ALTERNATE_2)) - -#define IS_DCMI_BYTE_SELECT_START(POLARITY)(((POLARITY) == DCMI_OEBS_ODD) || \ - ((POLARITY) == DCMI_OEBS_EVEN)) - -#define IS_DCMI_LINE_SELECT_MODE(MODE)(((MODE) == DCMI_LSM_ALL) || \ - ((MODE) == DCMI_LSM_ALTERNATE_2)) - -#define IS_DCMI_LINE_SELECT_START(POLARITY)(((POLARITY) == DCMI_OELS_ODD) || \ - ((POLARITY) == DCMI_OELS_EVEN)) -#endif /* STM32F446xx */ -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -#endif /* STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx ||\ - STM32F429xx || STM32F439xx || STM32F446xx */ -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_DCMI_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h deleted file mode 100644 index 8e6be05..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_def.h +++ /dev/null @@ -1,214 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_def.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief This file contains HAL common defines, enumeration, macros and - * structures definitions. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_DEF -#define __STM32F4xx_HAL_DEF - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx.h" -#include "Legacy/stm32_hal_legacy.h" -#include <stdio.h> - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief HAL Status structures definition - */ -typedef enum -{ - HAL_OK = 0x00, - HAL_ERROR = 0x01, - HAL_BUSY = 0x02, - HAL_TIMEOUT = 0x03 -} HAL_StatusTypeDef; - -/** - * @brief HAL Lock structures definition - */ -typedef enum -{ - HAL_UNLOCKED = 0x00, - HAL_LOCKED = 0x01 -} HAL_LockTypeDef; - -/* Exported macro ------------------------------------------------------------*/ -#define HAL_MAX_DELAY 0xFFFFFFFF - -#define HAL_IS_BIT_SET(REG, BIT) (((REG) & (BIT)) != RESET) -#define HAL_IS_BIT_CLR(REG, BIT) (((REG) & (BIT)) == RESET) - -#define __HAL_LINKDMA(__HANDLE__, __PPP_DMA_FIELD__, __DMA_HANDLE__) \ - do{ \ - (__HANDLE__)->__PPP_DMA_FIELD__ = &(__DMA_HANDLE__); \ - (__DMA_HANDLE__).Parent = (__HANDLE__); \ - } while(0) - -#define UNUSED(x) ((void)(x)) - -/** @brief Reset the Handle's State field. - * @param __HANDLE__: specifies the Peripheral Handle. - * @note This macro can be used for the following purpose: - * - When the Handle is declared as local variable; before passing it as parameter - * to HAL_PPP_Init() for the first time, it is mandatory to use this macro - * to set to 0 the Handle's "State" field. - * Otherwise, "State" field may have any random value and the first time the function - * HAL_PPP_Init() is called, the low level hardware initialization will be missed - * (i.e. HAL_PPP_MspInit() will not be executed). - * - When there is a need to reconfigure the low level hardware: instead of calling - * HAL_PPP_DeInit() then HAL_PPP_Init(), user can make a call to this macro then HAL_PPP_Init(). - * In this later function, when the Handle's "State" field is set to 0, it will execute the function - * HAL_PPP_MspInit() which will reconfigure the low level hardware. - * @retval None - */ -#define __HAL_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = 0) - -#if (USE_RTOS == 1) - /* Reserved for future use */ - #error “USE_RTOS should be 0 in the current HAL release” -#else - #define __HAL_LOCK(__HANDLE__) \ - do{ \ - if((__HANDLE__)->Lock == HAL_LOCKED) \ - { \ - return HAL_BUSY; \ - } \ - else \ - { \ - (__HANDLE__)->Lock = HAL_LOCKED; \ - } \ - }while (0) - - #define __HAL_UNLOCK(__HANDLE__) \ - do{ \ - (__HANDLE__)->Lock = HAL_UNLOCKED; \ - }while (0) -#endif /* USE_RTOS */ - -#if defined ( __GNUC__ ) - #ifndef __weak - #define __weak __attribute__((weak)) - #endif /* __weak */ - #ifndef __packed - #define __packed __attribute__((__packed__)) - #endif /* __packed */ -#endif /* __GNUC__ */ - - -/* Macro to get variable aligned on 4-bytes, for __ICCARM__ the directive "#pragma data_alignment=4" must be used instead */ -#if defined (__GNUC__) /* GNU Compiler */ - #ifndef __ALIGN_END - #define __ALIGN_END __attribute__ ((aligned (4))) - #endif /* __ALIGN_END */ - #ifndef __ALIGN_BEGIN - #define __ALIGN_BEGIN - #endif /* __ALIGN_BEGIN */ -#else - #ifndef __ALIGN_END - #define __ALIGN_END - #endif /* __ALIGN_END */ - #ifndef __ALIGN_BEGIN - #if defined (__CC_ARM) /* ARM Compiler */ - #define __ALIGN_BEGIN __align(4) - #elif defined (__ICCARM__) /* IAR Compiler */ - #define __ALIGN_BEGIN - #endif /* __CC_ARM */ - #endif /* __ALIGN_BEGIN */ -#endif /* __GNUC__ */ - - -/** - * @brief __RAM_FUNC definition - */ -#if defined ( __CC_ARM ) -/* ARM Compiler - ------------ - RAM functions are defined using the toolchain options. - Functions that are executed in RAM should reside in a separate source module. - Using the 'Options for File' dialog you can simply change the 'Code / Const' - area of a module to a memory space in physical RAM. - Available memory areas are declared in the 'Target' tab of the 'Options for Target' - dialog. -*/ -#define __RAM_FUNC HAL_StatusTypeDef - -#elif defined ( __ICCARM__ ) -/* ICCARM Compiler - --------------- - RAM functions are defined using a specific toolchain keyword "__ramfunc". -*/ -#define __RAM_FUNC __ramfunc HAL_StatusTypeDef - -#elif defined ( __GNUC__ ) -/* GNU Compiler - ------------ - RAM functions are defined using a specific toolchain attribute - "__attribute__((section(".RamFunc")))". -*/ -#define __RAM_FUNC HAL_StatusTypeDef __attribute__((section(".RamFunc"))) - -#endif - -/** - * @brief __NOINLINE definition - */ -#if defined ( __CC_ARM ) || defined ( __GNUC__ ) -/* ARM & GNUCompiler - ---------------- -*/ -#define __NOINLINE __attribute__ ( (noinline) ) - -#elif defined ( __ICCARM__ ) -/* ICCARM Compiler - --------------- -*/ -#define __NOINLINE _Pragma("optimize = no_inline") - -#endif - -#ifdef __cplusplus -} -#endif - -#endif /* ___STM32F4xx_HAL_DEF */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h deleted file mode 100644 index a5a0440..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma.h +++ /dev/null @@ -1,767 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dma.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of DMA HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_DMA_H -#define __STM32F4xx_HAL_DMA_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup DMA - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Types DMA Exported Types - * @brief DMA Exported Types - * @{ - */ - -/** - * @brief DMA Configuration Structure definition - */ -typedef struct -{ - uint32_t Channel; /*!< Specifies the channel used for the specified stream. - This parameter can be a value of @ref DMA_Channel_selection */ - - uint32_t Direction; /*!< Specifies if the data will be transferred from memory to peripheral, - from memory to memory or from peripheral to memory. - This parameter can be a value of @ref DMA_Data_transfer_direction */ - - uint32_t PeriphInc; /*!< Specifies whether the Peripheral address register should be incremented or not. - This parameter can be a value of @ref DMA_Peripheral_incremented_mode */ - - uint32_t MemInc; /*!< Specifies whether the memory address register should be incremented or not. - This parameter can be a value of @ref DMA_Memory_incremented_mode */ - - uint32_t PeriphDataAlignment; /*!< Specifies the Peripheral data width. - This parameter can be a value of @ref DMA_Peripheral_data_size */ - - uint32_t MemDataAlignment; /*!< Specifies the Memory data width. - This parameter can be a value of @ref DMA_Memory_data_size */ - - uint32_t Mode; /*!< Specifies the operation mode of the DMAy Streamx. - This parameter can be a value of @ref DMA_mode - @note The circular buffer mode cannot be used if the memory-to-memory - data transfer is configured on the selected Stream */ - - uint32_t Priority; /*!< Specifies the software priority for the DMAy Streamx. - This parameter can be a value of @ref DMA_Priority_level */ - - uint32_t FIFOMode; /*!< Specifies if the FIFO mode or Direct mode will be used for the specified stream. - This parameter can be a value of @ref DMA_FIFO_direct_mode - @note The Direct mode (FIFO mode disabled) cannot be used if the - memory-to-memory data transfer is configured on the selected stream */ - - uint32_t FIFOThreshold; /*!< Specifies the FIFO threshold level. - This parameter can be a value of @ref DMA_FIFO_threshold_level */ - - uint32_t MemBurst; /*!< Specifies the Burst transfer configuration for the memory transfers. - It specifies the amount of data to be transferred in a single non interruptible - transaction. - This parameter can be a value of @ref DMA_Memory_burst - @note The burst mode is possible only if the address Increment mode is enabled. */ - - uint32_t PeriphBurst; /*!< Specifies the Burst transfer configuration for the peripheral transfers. - It specifies the amount of data to be transferred in a single non interruptable - transaction. - This parameter can be a value of @ref DMA_Peripheral_burst - @note The burst mode is possible only if the address Increment mode is enabled. */ -}DMA_InitTypeDef; - - -/** - * @brief HAL DMA State structures definition - */ -typedef enum -{ - HAL_DMA_STATE_RESET = 0x00, /*!< DMA not yet initialized or disabled */ - HAL_DMA_STATE_READY = 0x01, /*!< DMA initialized and ready for use */ - HAL_DMA_STATE_READY_MEM0 = 0x11, /*!< DMA Mem0 process success */ - HAL_DMA_STATE_READY_MEM1 = 0x21, /*!< DMA Mem1 process success */ - HAL_DMA_STATE_READY_HALF_MEM0 = 0x31, /*!< DMA Mem0 Half process success */ - HAL_DMA_STATE_READY_HALF_MEM1 = 0x41, /*!< DMA Mem1 Half process success */ - HAL_DMA_STATE_BUSY = 0x02, /*!< DMA process is ongoing */ - HAL_DMA_STATE_BUSY_MEM0 = 0x12, /*!< DMA Mem0 process is ongoing */ - HAL_DMA_STATE_BUSY_MEM1 = 0x22, /*!< DMA Mem1 process is ongoing */ - HAL_DMA_STATE_TIMEOUT = 0x03, /*!< DMA timeout state */ - HAL_DMA_STATE_ERROR = 0x04, /*!< DMA error state */ -}HAL_DMA_StateTypeDef; - -/** - * @brief HAL DMA Error Code structure definition - */ -typedef enum -{ - HAL_DMA_FULL_TRANSFER = 0x00, /*!< Full transfer */ - HAL_DMA_HALF_TRANSFER = 0x01, /*!< Half Transfer */ -}HAL_DMA_LevelCompleteTypeDef; - -/** - * @brief DMA handle Structure definition - */ -typedef struct __DMA_HandleTypeDef -{ - DMA_Stream_TypeDef *Instance; /*!< Register base address */ - - DMA_InitTypeDef Init; /*!< DMA communication parameters */ - - HAL_LockTypeDef Lock; /*!< DMA locking object */ - - __IO HAL_DMA_StateTypeDef State; /*!< DMA transfer state */ - - void *Parent; /*!< Parent object state */ - - void (* XferCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete callback */ - - void (* XferHalfCpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA Half transfer complete callback */ - - void (* XferM1CpltCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer complete Memory1 callback */ - - void (* XferErrorCallback)( struct __DMA_HandleTypeDef * hdma); /*!< DMA transfer error callback */ - - __IO uint32_t ErrorCode; /*!< DMA Error code */ -}DMA_HandleTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Constants DMA Exported Constants - * @brief DMA Exported constants - * @{ - */ - -/** @defgroup DMA_Error_Code DMA Error Code - * @brief DMA Error Code - * @{ - */ -#define HAL_DMA_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ -#define HAL_DMA_ERROR_TE ((uint32_t)0x00000001) /*!< Transfer error */ -#define HAL_DMA_ERROR_FE ((uint32_t)0x00000002) /*!< FIFO error */ -#define HAL_DMA_ERROR_DME ((uint32_t)0x00000004) /*!< Direct Mode error */ -#define HAL_DMA_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */ -/** - * @} - */ - -/** @defgroup DMA_Channel_selection DMA Channel selection - * @brief DMA channel selection - * @{ - */ -#define DMA_CHANNEL_0 ((uint32_t)0x00000000) /*!< DMA Channel 0 */ -#define DMA_CHANNEL_1 ((uint32_t)0x02000000) /*!< DMA Channel 1 */ -#define DMA_CHANNEL_2 ((uint32_t)0x04000000) /*!< DMA Channel 2 */ -#define DMA_CHANNEL_3 ((uint32_t)0x06000000) /*!< DMA Channel 3 */ -#define DMA_CHANNEL_4 ((uint32_t)0x08000000) /*!< DMA Channel 4 */ -#define DMA_CHANNEL_5 ((uint32_t)0x0A000000) /*!< DMA Channel 5 */ -#define DMA_CHANNEL_6 ((uint32_t)0x0C000000) /*!< DMA Channel 6 */ -#define DMA_CHANNEL_7 ((uint32_t)0x0E000000) /*!< DMA Channel 7 */ -/** - * @} - */ - -/** @defgroup DMA_Data_transfer_direction DMA Data transfer direction - * @brief DMA data transfer direction - * @{ - */ -#define DMA_PERIPH_TO_MEMORY ((uint32_t)0x00000000) /*!< Peripheral to memory direction */ -#define DMA_MEMORY_TO_PERIPH ((uint32_t)DMA_SxCR_DIR_0) /*!< Memory to peripheral direction */ -#define DMA_MEMORY_TO_MEMORY ((uint32_t)DMA_SxCR_DIR_1) /*!< Memory to memory direction */ -/** - * @} - */ - -/** @defgroup DMA_Peripheral_incremented_mode DMA Peripheral incremented mode - * @brief DMA peripheral incremented mode - * @{ - */ -#define DMA_PINC_ENABLE ((uint32_t)DMA_SxCR_PINC) /*!< Peripheral increment mode enable */ -#define DMA_PINC_DISABLE ((uint32_t)0x00000000) /*!< Peripheral increment mode disable */ -/** - * @} - */ - -/** @defgroup DMA_Memory_incremented_mode DMA Memory incremented mode - * @brief DMA memory incremented mode - * @{ - */ -#define DMA_MINC_ENABLE ((uint32_t)DMA_SxCR_MINC) /*!< Memory increment mode enable */ -#define DMA_MINC_DISABLE ((uint32_t)0x00000000) /*!< Memory increment mode disable */ -/** - * @} - */ - -/** @defgroup DMA_Peripheral_data_size DMA Peripheral data size - * @brief DMA peripheral data size - * @{ - */ -#define DMA_PDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Peripheral data alignment: Byte */ -#define DMA_PDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_PSIZE_0) /*!< Peripheral data alignment: HalfWord */ -#define DMA_PDATAALIGN_WORD ((uint32_t)DMA_SxCR_PSIZE_1) /*!< Peripheral data alignment: Word */ -/** - * @} - */ - -/** @defgroup DMA_Memory_data_size DMA Memory data size - * @brief DMA memory data size - * @{ - */ -#define DMA_MDATAALIGN_BYTE ((uint32_t)0x00000000) /*!< Memory data alignment: Byte */ -#define DMA_MDATAALIGN_HALFWORD ((uint32_t)DMA_SxCR_MSIZE_0) /*!< Memory data alignment: HalfWord */ -#define DMA_MDATAALIGN_WORD ((uint32_t)DMA_SxCR_MSIZE_1) /*!< Memory data alignment: Word */ -/** - * @} - */ - -/** @defgroup DMA_mode DMA mode - * @brief DMA mode - * @{ - */ -#define DMA_NORMAL ((uint32_t)0x00000000) /*!< Normal mode */ -#define DMA_CIRCULAR ((uint32_t)DMA_SxCR_CIRC) /*!< Circular mode */ -#define DMA_PFCTRL ((uint32_t)DMA_SxCR_PFCTRL) /*!< Peripheral flow control mode */ -/** - * @} - */ - -/** @defgroup DMA_Priority_level DMA Priority level - * @brief DMA priority levels - * @{ - */ -#define DMA_PRIORITY_LOW ((uint32_t)0x00000000) /*!< Priority level: Low */ -#define DMA_PRIORITY_MEDIUM ((uint32_t)DMA_SxCR_PL_0) /*!< Priority level: Medium */ -#define DMA_PRIORITY_HIGH ((uint32_t)DMA_SxCR_PL_1) /*!< Priority level: High */ -#define DMA_PRIORITY_VERY_HIGH ((uint32_t)DMA_SxCR_PL) /*!< Priority level: Very High */ -/** - * @} - */ - -/** @defgroup DMA_FIFO_direct_mode DMA FIFO direct mode - * @brief DMA FIFO direct mode - * @{ - */ -#define DMA_FIFOMODE_DISABLE ((uint32_t)0x00000000) /*!< FIFO mode disable */ -#define DMA_FIFOMODE_ENABLE ((uint32_t)DMA_SxFCR_DMDIS) /*!< FIFO mode enable */ -/** - * @} - */ - -/** @defgroup DMA_FIFO_threshold_level DMA FIFO threshold level - * @brief DMA FIFO level - * @{ - */ -#define DMA_FIFO_THRESHOLD_1QUARTERFULL ((uint32_t)0x00000000) /*!< FIFO threshold 1 quart full configuration */ -#define DMA_FIFO_THRESHOLD_HALFFULL ((uint32_t)DMA_SxFCR_FTH_0) /*!< FIFO threshold half full configuration */ -#define DMA_FIFO_THRESHOLD_3QUARTERSFULL ((uint32_t)DMA_SxFCR_FTH_1) /*!< FIFO threshold 3 quarts full configuration */ -#define DMA_FIFO_THRESHOLD_FULL ((uint32_t)DMA_SxFCR_FTH) /*!< FIFO threshold full configuration */ -/** - * @} - */ - -/** @defgroup DMA_Memory_burst DMA Memory burst - * @brief DMA memory burst - * @{ - */ -#define DMA_MBURST_SINGLE ((uint32_t)0x00000000) -#define DMA_MBURST_INC4 ((uint32_t)DMA_SxCR_MBURST_0) -#define DMA_MBURST_INC8 ((uint32_t)DMA_SxCR_MBURST_1) -#define DMA_MBURST_INC16 ((uint32_t)DMA_SxCR_MBURST) -/** - * @} - */ - -/** @defgroup DMA_Peripheral_burst DMA Peripheral burst - * @brief DMA peripheral burst - * @{ - */ -#define DMA_PBURST_SINGLE ((uint32_t)0x00000000) -#define DMA_PBURST_INC4 ((uint32_t)DMA_SxCR_PBURST_0) -#define DMA_PBURST_INC8 ((uint32_t)DMA_SxCR_PBURST_1) -#define DMA_PBURST_INC16 ((uint32_t)DMA_SxCR_PBURST) -/** - * @} - */ - -/** @defgroup DMA_interrupt_enable_definitions DMA interrupt enable definitions - * @brief DMA interrupts definition - * @{ - */ -#define DMA_IT_TC ((uint32_t)DMA_SxCR_TCIE) -#define DMA_IT_HT ((uint32_t)DMA_SxCR_HTIE) -#define DMA_IT_TE ((uint32_t)DMA_SxCR_TEIE) -#define DMA_IT_DME ((uint32_t)DMA_SxCR_DMEIE) -#define DMA_IT_FE ((uint32_t)0x00000080) -/** - * @} - */ - -/** @defgroup DMA_flag_definitions DMA flag definitions - * @brief DMA flag definitions - * @{ - */ -#define DMA_FLAG_FEIF0_4 ((uint32_t)0x00800001) -#define DMA_FLAG_DMEIF0_4 ((uint32_t)0x00800004) -#define DMA_FLAG_TEIF0_4 ((uint32_t)0x00000008) -#define DMA_FLAG_HTIF0_4 ((uint32_t)0x00000010) -#define DMA_FLAG_TCIF0_4 ((uint32_t)0x00000020) -#define DMA_FLAG_FEIF1_5 ((uint32_t)0x00000040) -#define DMA_FLAG_DMEIF1_5 ((uint32_t)0x00000100) -#define DMA_FLAG_TEIF1_5 ((uint32_t)0x00000200) -#define DMA_FLAG_HTIF1_5 ((uint32_t)0x00000400) -#define DMA_FLAG_TCIF1_5 ((uint32_t)0x00000800) -#define DMA_FLAG_FEIF2_6 ((uint32_t)0x00010000) -#define DMA_FLAG_DMEIF2_6 ((uint32_t)0x00040000) -#define DMA_FLAG_TEIF2_6 ((uint32_t)0x00080000) -#define DMA_FLAG_HTIF2_6 ((uint32_t)0x00100000) -#define DMA_FLAG_TCIF2_6 ((uint32_t)0x00200000) -#define DMA_FLAG_FEIF3_7 ((uint32_t)0x00400000) -#define DMA_FLAG_DMEIF3_7 ((uint32_t)0x01000000) -#define DMA_FLAG_TEIF3_7 ((uint32_t)0x02000000) -#define DMA_FLAG_HTIF3_7 ((uint32_t)0x04000000) -#define DMA_FLAG_TCIF3_7 ((uint32_t)0x08000000) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ - -/** @brief Reset DMA handle state - * @param __HANDLE__: specifies the DMA handle. - * @retval None - */ -#define __HAL_DMA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA_STATE_RESET) - -/** - * @brief Return the current DMA Stream FIFO filled level. - * @param __HANDLE__: DMA handle - * @retval The FIFO filling state. - * - DMA_FIFOStatus_Less1QuarterFull: when FIFO is less than 1 quarter-full - * and not empty. - * - DMA_FIFOStatus_1QuarterFull: if more than 1 quarter-full. - * - DMA_FIFOStatus_HalfFull: if more than 1 half-full. - * - DMA_FIFOStatus_3QuartersFull: if more than 3 quarters-full. - * - DMA_FIFOStatus_Empty: when FIFO is empty - * - DMA_FIFOStatus_Full: when FIFO is full - */ -#define __HAL_DMA_GET_FS(__HANDLE__) (((__HANDLE__)->Instance->FCR & (DMA_SxFCR_FS))) - -/** - * @brief Enable the specified DMA Stream. - * @param __HANDLE__: DMA handle - * @retval None - */ -#define __HAL_DMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA_SxCR_EN) - -/** - * @brief Disable the specified DMA Stream. - * @param __HANDLE__: DMA handle - * @retval None - */ -#define __HAL_DMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA_SxCR_EN) - -/* Interrupt & Flag management */ - -/** - * @brief Return the current DMA Stream transfer complete flag. - * @param __HANDLE__: DMA handle - * @retval The specified transfer complete flag index. - */ -#define __HAL_DMA_GET_TC_FLAG_INDEX(__HANDLE__) \ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TCIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TCIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TCIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TCIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TCIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TCIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TCIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TCIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TCIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TCIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TCIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TCIF2_6 :\ - DMA_FLAG_TCIF3_7) - -/** - * @brief Return the current DMA Stream half transfer complete flag. - * @param __HANDLE__: DMA handle - * @retval The specified half transfer complete flag index. - */ -#define __HAL_DMA_GET_HT_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_HTIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_HTIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_HTIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_HTIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_HTIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_HTIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_HTIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_HTIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_HTIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_HTIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_HTIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_HTIF2_6 :\ - DMA_FLAG_HTIF3_7) - -/** - * @brief Return the current DMA Stream transfer error flag. - * @param __HANDLE__: DMA handle - * @retval The specified transfer error flag index. - */ -#define __HAL_DMA_GET_TE_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_TEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_TEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_TEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_TEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_TEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_TEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_TEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_TEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_TEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_TEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_TEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_TEIF2_6 :\ - DMA_FLAG_TEIF3_7) - -/** - * @brief Return the current DMA Stream FIFO error flag. - * @param __HANDLE__: DMA handle - * @retval The specified FIFO error flag index. - */ -#define __HAL_DMA_GET_FE_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_FEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_FEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_FEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_FEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_FEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_FEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_FEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_FEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_FEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_FEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_FEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_FEIF2_6 :\ - DMA_FLAG_FEIF3_7) - -/** - * @brief Return the current DMA Stream direct mode error flag. - * @param __HANDLE__: DMA handle - * @retval The specified direct mode error flag index. - */ -#define __HAL_DMA_GET_DME_FLAG_INDEX(__HANDLE__)\ -(((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream0))? DMA_FLAG_DMEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream0))? DMA_FLAG_DMEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream4))? DMA_FLAG_DMEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream4))? DMA_FLAG_DMEIF0_4 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream1))? DMA_FLAG_DMEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream1))? DMA_FLAG_DMEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream5))? DMA_FLAG_DMEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream5))? DMA_FLAG_DMEIF1_5 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream2))? DMA_FLAG_DMEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream2))? DMA_FLAG_DMEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA1_Stream6))? DMA_FLAG_DMEIF2_6 :\ - ((uint32_t)((__HANDLE__)->Instance) == ((uint32_t)DMA2_Stream6))? DMA_FLAG_DMEIF2_6 :\ - DMA_FLAG_DMEIF3_7) - -/** - * @brief Get the DMA Stream pending flags. - * @param __HANDLE__: DMA handle - * @param __FLAG__: Get the specified flag. - * This parameter can be any combination of the following values: - * @arg DMA_FLAG_TCIFx: Transfer complete flag. - * @arg DMA_FLAG_HTIFx: Half transfer complete flag. - * @arg DMA_FLAG_TEIFx: Transfer error flag. - * @arg DMA_FLAG_DMEIFx: Direct mode error flag. - * @arg DMA_FLAG_FEIFx: FIFO error flag. - * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag. - * @retval The state of FLAG (SET or RESET). - */ -#define __HAL_DMA_GET_FLAG(__HANDLE__, __FLAG__)\ -(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HISR & (__FLAG__)) :\ - ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LISR & (__FLAG__)) :\ - ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HISR & (__FLAG__)) : (DMA1->LISR & (__FLAG__))) - -/** - * @brief Clear the DMA Stream pending flags. - * @param __HANDLE__: DMA handle - * @param __FLAG__: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg DMA_FLAG_TCIFx: Transfer complete flag. - * @arg DMA_FLAG_HTIFx: Half transfer complete flag. - * @arg DMA_FLAG_TEIFx: Transfer error flag. - * @arg DMA_FLAG_DMEIFx: Direct mode error flag. - * @arg DMA_FLAG_FEIFx: FIFO error flag. - * Where x can be 0_4, 1_5, 2_6 or 3_7 to select the DMA Stream flag. - * @retval None - */ -#define __HAL_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) \ -(((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA2_Stream3)? (DMA2->HIFCR = (__FLAG__)) :\ - ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream7)? (DMA2->LIFCR = (__FLAG__)) :\ - ((uint32_t)((__HANDLE__)->Instance) > (uint32_t)DMA1_Stream3)? (DMA1->HIFCR = (__FLAG__)) : (DMA1->LIFCR = (__FLAG__))) - -/** - * @brief Enable the specified DMA Stream interrupts. - * @param __HANDLE__: DMA handle - * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask. - * @arg DMA_IT_HT: Half transfer complete interrupt mask. - * @arg DMA_IT_TE: Transfer error interrupt mask. - * @arg DMA_IT_FE: FIFO error interrupt mask. - * @arg DMA_IT_DME: Direct mode error interrupt. - * @retval None - */ -#define __HAL_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ -((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR |= (__INTERRUPT__))) - -/** - * @brief Disable the specified DMA Stream interrupts. - * @param __HANDLE__: DMA handle - * @param __INTERRUPT__: specifies the DMA interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask. - * @arg DMA_IT_HT: Half transfer complete interrupt mask. - * @arg DMA_IT_TE: Transfer error interrupt mask. - * @arg DMA_IT_FE: FIFO error interrupt mask. - * @arg DMA_IT_DME: Direct mode error interrupt. - * @retval None - */ -#define __HAL_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ -((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) : ((__HANDLE__)->Instance->FCR &= ~(__INTERRUPT__))) - -/** - * @brief Check whether the specified DMA Stream interrupt is enabled or disabled. - * @param __HANDLE__: DMA handle - * @param __INTERRUPT__: specifies the DMA interrupt source to check. - * This parameter can be one of the following values: - * @arg DMA_IT_TC: Transfer complete interrupt mask. - * @arg DMA_IT_HT: Half transfer complete interrupt mask. - * @arg DMA_IT_TE: Transfer error interrupt mask. - * @arg DMA_IT_FE: FIFO error interrupt mask. - * @arg DMA_IT_DME: Direct mode error interrupt. - * @retval The state of DMA_IT. - */ -#define __HAL_DMA_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__INTERRUPT__) != DMA_IT_FE)? \ - ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) : \ - ((__HANDLE__)->Instance->FCR & (__INTERRUPT__))) - -/** - * @brief Writes the number of data units to be transferred on the DMA Stream. - * @param __HANDLE__: DMA handle - * @param __COUNTER__: Number of data units to be transferred (from 0 to 65535) - * Number of data items depends only on the Peripheral data format. - * - * @note If Peripheral data format is Bytes: number of data units is equal - * to total number of bytes to be transferred. - * - * @note If Peripheral data format is Half-Word: number of data units is - * equal to total number of bytes to be transferred / 2. - * - * @note If Peripheral data format is Word: number of data units is equal - * to total number of bytes to be transferred / 4. - * - * @retval The number of remaining data units in the current DMAy Streamx transfer. - */ -#define __HAL_DMA_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->NDTR = (uint16_t)(__COUNTER__)) - -/** - * @brief Returns the number of remaining data units in the current DMAy Streamx transfer. - * @param __HANDLE__: DMA handle - * - * @retval The number of remaining data units in the current DMA Stream transfer. - */ -#define __HAL_DMA_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->NDTR) - - -/* Include DMA HAL Extension module */ -#include "stm32f4xx_hal_dma_ex.h" - -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup DMA_Exported_Functions DMA Exported Functions - * @brief DMA Exported functions - * @{ - */ - -/** @defgroup DMA_Exported_Functions_Group1 Initialization and de-initialization functions - * @brief Initialization and de-initialization functions - * @{ - */ -HAL_StatusTypeDef HAL_DMA_Init(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_DeInit(DMA_HandleTypeDef *hdma); -/** - * @} - */ - -/** @defgroup DMA_Exported_Functions_Group2 I/O operation functions - * @brief I/O operation functions - * @{ - */ -HAL_StatusTypeDef HAL_DMA_Start (DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMA_Start_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMA_Abort(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef HAL_DMA_PollForTransfer(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout); -void HAL_DMA_IRQHandler(DMA_HandleTypeDef *hdma); -/** - * @} - */ - -/** @defgroup DMA_Exported_Functions_Group3 Peripheral State functions - * @brief Peripheral State functions - * @{ - */ -HAL_DMA_StateTypeDef HAL_DMA_GetState(DMA_HandleTypeDef *hdma); -uint32_t HAL_DMA_GetError(DMA_HandleTypeDef *hdma); -/** - * @} - */ -/** - * @} - */ -/* Private Constants -------------------------------------------------------------*/ -/** @defgroup DMA_Private_Constants DMA Private Constants - * @brief DMA private defines and constants - * @{ - */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup DMA_Private_Macros DMA Private Macros - * @brief DMA private macros - * @{ - */ -#define IS_DMA_CHANNEL(CHANNEL) (((CHANNEL) == DMA_CHANNEL_0) || \ - ((CHANNEL) == DMA_CHANNEL_1) || \ - ((CHANNEL) == DMA_CHANNEL_2) || \ - ((CHANNEL) == DMA_CHANNEL_3) || \ - ((CHANNEL) == DMA_CHANNEL_4) || \ - ((CHANNEL) == DMA_CHANNEL_5) || \ - ((CHANNEL) == DMA_CHANNEL_6) || \ - ((CHANNEL) == DMA_CHANNEL_7)) - -#define IS_DMA_DIRECTION(DIRECTION) (((DIRECTION) == DMA_PERIPH_TO_MEMORY ) || \ - ((DIRECTION) == DMA_MEMORY_TO_PERIPH) || \ - ((DIRECTION) == DMA_MEMORY_TO_MEMORY)) - -#define IS_DMA_BUFFER_SIZE(SIZE) (((SIZE) >= 0x1) && ((SIZE) < 0x10000)) - -#define IS_DMA_PERIPHERAL_INC_STATE(STATE) (((STATE) == DMA_PINC_ENABLE) || \ - ((STATE) == DMA_PINC_DISABLE)) - -#define IS_DMA_MEMORY_INC_STATE(STATE) (((STATE) == DMA_MINC_ENABLE) || \ - ((STATE) == DMA_MINC_DISABLE)) - -#define IS_DMA_PERIPHERAL_DATA_SIZE(SIZE) (((SIZE) == DMA_PDATAALIGN_BYTE) || \ - ((SIZE) == DMA_PDATAALIGN_HALFWORD) || \ - ((SIZE) == DMA_PDATAALIGN_WORD)) - -#define IS_DMA_MEMORY_DATA_SIZE(SIZE) (((SIZE) == DMA_MDATAALIGN_BYTE) || \ - ((SIZE) == DMA_MDATAALIGN_HALFWORD) || \ - ((SIZE) == DMA_MDATAALIGN_WORD )) - -#define IS_DMA_MODE(MODE) (((MODE) == DMA_NORMAL ) || \ - ((MODE) == DMA_CIRCULAR) || \ - ((MODE) == DMA_PFCTRL)) - -#define IS_DMA_PRIORITY(PRIORITY) (((PRIORITY) == DMA_PRIORITY_LOW ) || \ - ((PRIORITY) == DMA_PRIORITY_MEDIUM) || \ - ((PRIORITY) == DMA_PRIORITY_HIGH) || \ - ((PRIORITY) == DMA_PRIORITY_VERY_HIGH)) - -#define IS_DMA_FIFO_MODE_STATE(STATE) (((STATE) == DMA_FIFOMODE_DISABLE ) || \ - ((STATE) == DMA_FIFOMODE_ENABLE)) - -#define IS_DMA_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == DMA_FIFO_THRESHOLD_1QUARTERFULL ) || \ - ((THRESHOLD) == DMA_FIFO_THRESHOLD_HALFFULL) || \ - ((THRESHOLD) == DMA_FIFO_THRESHOLD_3QUARTERSFULL) || \ - ((THRESHOLD) == DMA_FIFO_THRESHOLD_FULL)) - -#define IS_DMA_MEMORY_BURST(BURST) (((BURST) == DMA_MBURST_SINGLE) || \ - ((BURST) == DMA_MBURST_INC4) || \ - ((BURST) == DMA_MBURST_INC8) || \ - ((BURST) == DMA_MBURST_INC16)) - -#define IS_DMA_PERIPHERAL_BURST(BURST) (((BURST) == DMA_PBURST_SINGLE) || \ - ((BURST) == DMA_PBURST_INC4) || \ - ((BURST) == DMA_PBURST_INC8) || \ - ((BURST) == DMA_PBURST_INC16)) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup DMA_Private_Functions DMA Private Functions - * @brief DMA private functions - * @{ - */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_DMA_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma2d.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma2d.h deleted file mode 100644 index dbe02fa..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma2d.h +++ /dev/null @@ -1,554 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dma2d.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of DMA2D HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_DMA2D_H -#define __STM32F4xx_HAL_DMA2D_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup DMA2D DMA2D - * @brief DMA2D HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup DMA2D_Exported_Types DMA2D Exported Types - * @{ - */ -#define MAX_DMA2D_LAYER 2 - -/** - * @brief DMA2D color Structure definition - */ -typedef struct -{ - uint32_t Blue; /*!< Configures the blue value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */ - - uint32_t Green; /*!< Configures the green value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */ - - uint32_t Red; /*!< Configures the red value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */ -} DMA2D_ColorTypeDef; - -/** - * @brief DMA2D CLUT Structure definition - */ -typedef struct -{ - uint32_t *pCLUT; /*!< Configures the DMA2D CLUT memory address.*/ - - uint32_t CLUTColorMode; /*!< configures the DMA2D CLUT color mode. - This parameter can be one value of @ref DMA2D_CLUT_CM */ - - uint32_t Size; /*!< configures the DMA2D CLUT size. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/ -} DMA2D_CLUTCfgTypeDef; - -/** - * @brief DMA2D Init structure definition - */ -typedef struct -{ - uint32_t Mode; /*!< configures the DMA2D transfer mode. - This parameter can be one value of @ref DMA2D_Mode */ - - uint32_t ColorMode; /*!< configures the color format of the output image. - This parameter can be one value of @ref DMA2D_Color_Mode */ - - uint32_t OutputOffset; /*!< Specifies the Offset value. - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */ -} DMA2D_InitTypeDef; - -/** - * @brief DMA2D Layer structure definition - */ -typedef struct -{ - uint32_t InputOffset; /*!< configures the DMA2D foreground offset. - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x3FFF. */ - - uint32_t InputColorMode; /*!< configures the DMA2D foreground color mode . - This parameter can be one value of @ref DMA2D_Input_Color_Mode */ - - uint32_t AlphaMode; /*!< configures the DMA2D foreground alpha mode. - This parameter can be one value of @ref DMA2D_ALPHA_MODE */ - - uint32_t InputAlpha; /*!< Specifies the DMA2D foreground alpha value and color value in case of A8 or A4 color mode. - This parameter must be a number between Min_Data = 0x00000000 and Max_Data = 0xFFFFFFFF - in case of A8 or A4 color mode (ARGB). - Otherwise, This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF.*/ - -} DMA2D_LayerCfgTypeDef; - -/** - * @brief HAL DMA2D State structures definition - */ -typedef enum -{ - HAL_DMA2D_STATE_RESET = 0x00, /*!< DMA2D not yet initialized or disabled */ - HAL_DMA2D_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ - HAL_DMA2D_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ - HAL_DMA2D_STATE_TIMEOUT = 0x03, /*!< Timeout state */ - HAL_DMA2D_STATE_ERROR = 0x04, /*!< DMA2D state error */ - HAL_DMA2D_STATE_SUSPEND = 0x05 /*!< DMA2D process is suspended */ -}HAL_DMA2D_StateTypeDef; - -/** - * @brief DMA2D handle Structure definition - */ -typedef struct __DMA2D_HandleTypeDef -{ - DMA2D_TypeDef *Instance; /*!< DMA2D Register base address */ - - DMA2D_InitTypeDef Init; /*!< DMA2D communication parameters */ - - void (* XferCpltCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer complete callback */ - - void (* XferErrorCallback)(struct __DMA2D_HandleTypeDef * hdma2d); /*!< DMA2D transfer error callback */ - - DMA2D_LayerCfgTypeDef LayerCfg[MAX_DMA2D_LAYER]; /*!< DMA2D Layers parameters */ - - HAL_LockTypeDef Lock; /*!< DMA2D Lock */ - - __IO HAL_DMA2D_StateTypeDef State; /*!< DMA2D transfer state */ - - __IO uint32_t ErrorCode; /*!< DMA2D Error code */ -} DMA2D_HandleTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup DMA2D_Exported_Constants DMA2D Exported Constants - * @{ - */ - -/** @defgroup DMA2D_Error_Code DMA2D Error Code - * @{ - */ -#define HAL_DMA2D_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ -#define HAL_DMA2D_ERROR_TE ((uint32_t)0x00000001) /*!< Transfer error */ -#define HAL_DMA2D_ERROR_CE ((uint32_t)0x00000002) /*!< Configuration error */ -#define HAL_DMA2D_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout error */ -/** - * @} - */ - -/** @defgroup DMA2D_Mode DMA2D Mode - * @{ - */ -#define DMA2D_M2M ((uint32_t)0x00000000) /*!< DMA2D memory to memory transfer mode */ -#define DMA2D_M2M_PFC ((uint32_t)0x00010000) /*!< DMA2D memory to memory with pixel format conversion transfer mode */ -#define DMA2D_M2M_BLEND ((uint32_t)0x00020000) /*!< DMA2D memory to memory with blending transfer mode */ -#define DMA2D_R2M ((uint32_t)0x00030000) /*!< DMA2D register to memory transfer mode */ -/** - * @} - */ - -/** @defgroup DMA2D_Color_Mode DMA2D Color Mode - * @{ - */ -#define DMA2D_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 DMA2D color mode */ -#define DMA2D_RGB888 ((uint32_t)0x00000001) /*!< RGB888 DMA2D color mode */ -#define DMA2D_RGB565 ((uint32_t)0x00000002) /*!< RGB565 DMA2D color mode */ -#define DMA2D_ARGB1555 ((uint32_t)0x00000003) /*!< ARGB1555 DMA2D color mode */ -#define DMA2D_ARGB4444 ((uint32_t)0x00000004) /*!< ARGB4444 DMA2D color mode */ -/** - * @} - */ - -/** @defgroup DMA2D_COLOR_VALUE DMA2D COLOR VALUE - * @{ - */ -#define COLOR_VALUE ((uint32_t)0x000000FF) /*!< color value mask */ -/** - * @} - */ - -/** @defgroup DMA2D_SIZE DMA2D SIZE - * @{ - */ -#define DMA2D_PIXEL (DMA2D_NLR_PL >> 16) /*!< DMA2D pixel per line */ -#define DMA2D_LINE DMA2D_NLR_NL /*!< DMA2D number of line */ -/** - * @} - */ - -/** @defgroup DMA2D_Offset DMA2D Offset - * @{ - */ -#define DMA2D_OFFSET DMA2D_FGOR_LO /*!< Line Offset */ -/** - * @} - */ - -/** @defgroup DMA2D_Input_Color_Mode DMA2D Input Color Mode - * @{ - */ -#define CM_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 color mode */ -#define CM_RGB888 ((uint32_t)0x00000001) /*!< RGB888 color mode */ -#define CM_RGB565 ((uint32_t)0x00000002) /*!< RGB565 color mode */ -#define CM_ARGB1555 ((uint32_t)0x00000003) /*!< ARGB1555 color mode */ -#define CM_ARGB4444 ((uint32_t)0x00000004) /*!< ARGB4444 color mode */ -#define CM_L8 ((uint32_t)0x00000005) /*!< L8 color mode */ -#define CM_AL44 ((uint32_t)0x00000006) /*!< AL44 color mode */ -#define CM_AL88 ((uint32_t)0x00000007) /*!< AL88 color mode */ -#define CM_L4 ((uint32_t)0x00000008) /*!< L4 color mode */ -#define CM_A8 ((uint32_t)0x00000009) /*!< A8 color mode */ -#define CM_A4 ((uint32_t)0x0000000A) /*!< A4 color mode */ -/** - * @} - */ - -/** @defgroup DMA2D_ALPHA_MODE DMA2D ALPHA MODE - * @{ - */ -#define DMA2D_NO_MODIF_ALPHA ((uint32_t)0x00000000) /*!< No modification of the alpha channel value */ -#define DMA2D_REPLACE_ALPHA ((uint32_t)0x00000001) /*!< Replace original alpha channel value by programmed alpha value */ -#define DMA2D_COMBINE_ALPHA ((uint32_t)0x00000002) /*!< Replace original alpha channel value by programmed alpha value - with original alpha channel value */ -/** - * @} - */ - -/** @defgroup DMA2D_CLUT_CM DMA2D CLUT CM - * @{ - */ -#define DMA2D_CCM_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 DMA2D C-LUT color mode */ -#define DMA2D_CCM_RGB888 ((uint32_t)0x00000001) /*!< RGB888 DMA2D C-LUT color mode */ -/** - * @} - */ - -/** @defgroup DMA2D_Size_Clut DMA2D Size Clut - * @{ - */ -#define DMA2D_CLUT_SIZE (DMA2D_FGPFCCR_CS >> 8) /*!< DMA2D C-LUT size */ -/** - * @} - */ - -/** @defgroup DMA2D_DeadTime DMA2D DeadTime - * @{ - */ -#define LINE_WATERMARK DMA2D_LWR_LW -/** - * @} - */ - -/** @defgroup DMA2D_Interrupts DMA2D Interrupts - * @{ - */ -#define DMA2D_IT_CE DMA2D_CR_CEIE /*!< Configuration Error Interrupt */ -#define DMA2D_IT_CTC DMA2D_CR_CTCIE /*!< C-LUT Transfer Complete Interrupt */ -#define DMA2D_IT_CAE DMA2D_CR_CAEIE /*!< C-LUT Access Error Interrupt */ -#define DMA2D_IT_TW DMA2D_CR_TWIE /*!< Transfer Watermark Interrupt */ -#define DMA2D_IT_TC DMA2D_CR_TCIE /*!< Transfer Complete Interrupt */ -#define DMA2D_IT_TE DMA2D_CR_TEIE /*!< Transfer Error Interrupt */ -/** - * @} - */ - -/** @defgroup DMA2D_Flag DMA2D Flag - * @{ - */ -#define DMA2D_FLAG_CE DMA2D_ISR_CEIF /*!< Configuration Error Interrupt Flag */ -#define DMA2D_FLAG_CTC DMA2D_ISR_CTCIF /*!< C-LUT Transfer Complete Interrupt Flag */ -#define DMA2D_FLAG_CAE DMA2D_ISR_CAEIF /*!< C-LUT Access Error Interrupt Flag */ -#define DMA2D_FLAG_TW DMA2D_ISR_TWIF /*!< Transfer Watermark Interrupt Flag */ -#define DMA2D_FLAG_TC DMA2D_ISR_TCIF /*!< Transfer Complete Interrupt Flag */ -#define DMA2D_FLAG_TE DMA2D_ISR_TEIF /*!< Transfer Error Interrupt Flag */ -/** - * @} - */ - -/** - * @} - */ -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup DMA2D_Exported_Macros DMA2D Exported Macros - * @{ - */ - -/** @brief Reset DMA2D handle state - * @param __HANDLE__: specifies the DMA2D handle. - * @retval None - */ -#define __HAL_DMA2D_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_DMA2D_STATE_RESET) - -/** - * @brief Enable the DMA2D. - * @param __HANDLE__: DMA2D handle - * @retval None. - */ -#define __HAL_DMA2D_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= DMA2D_CR_START) - -/** - * @brief Disable the DMA2D. - * @param __HANDLE__: DMA2D handle - * @retval None. - */ -#define __HAL_DMA2D_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~DMA2D_CR_START) - -/* Interrupt & Flag management */ -/** - * @brief Get the DMA2D pending flags. - * @param __HANDLE__: DMA2D handle - * @param __FLAG__: Get the specified flag. - * This parameter can be any combination of the following values: - * @arg DMA2D_FLAG_CE: Configuration error flag - * @arg DMA2D_FLAG_CTC: C-LUT transfer complete flag - * @arg DMA2D_FLAG_CAE: C-LUT access error flag - * @arg DMA2D_FLAG_TW: Transfer Watermark flag - * @arg DMA2D_FLAG_TC: Transfer complete flag - * @arg DMA2D_FLAG_TE: Transfer error flag - * @retval The state of FLAG. - */ -#define __HAL_DMA2D_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__)) - -/** - * @brief Clears the DMA2D pending flags. - * @param __HANDLE__: DMA2D handle - * @param __FLAG__: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg DMA2D_FLAG_CE: Configuration error flag - * @arg DMA2D_FLAG_CTC: C-LUT transfer complete flag - * @arg DMA2D_FLAG_CAE: C-LUT access error flag - * @arg DMA2D_FLAG_TW: Transfer Watermark flag - * @arg DMA2D_FLAG_TC: Transfer complete flag - * @arg DMA2D_FLAG_TE: Transfer error flag - * @retval None - */ -#define __HAL_DMA2D_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->IFCR = (__FLAG__)) - -/** - * @brief Enables the specified DMA2D interrupts. - * @param __HANDLE__: DMA2D handle - * @param __INTERRUPT__: specifies the DMA2D interrupt sources to be enabled. - * This parameter can be any combination of the following values: - * @arg DMA2D_IT_CE: Configuration error interrupt mask - * @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask - * @arg DMA2D_IT_CAE: C-LUT access error interrupt mask - * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask - * @arg DMA2D_IT_TC: Transfer complete interrupt mask - * @arg DMA2D_IT_TE: Transfer error interrupt mask - * @retval None - */ -#define __HAL_DMA2D_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) - -/** - * @brief Disables the specified DMA2D interrupts. - * @param __HANDLE__: DMA2D handle - * @param __INTERRUPT__: specifies the DMA2D interrupt sources to be disabled. - * This parameter can be any combination of the following values: - * @arg DMA2D_IT_CE: Configuration error interrupt mask - * @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask - * @arg DMA2D_IT_CAE: C-LUT access error interrupt mask - * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask - * @arg DMA2D_IT_TC: Transfer complete interrupt mask - * @arg DMA2D_IT_TE: Transfer error interrupt mask - * @retval None - */ -#define __HAL_DMA2D_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) - -/** - * @brief Checks whether the specified DMA2D interrupt has occurred or not. - * @param __HANDLE__: DMA2D handle - * @param __INTERRUPT__: specifies the DMA2D interrupt source to check. - * This parameter can be one of the following values: - * @arg DMA2D_IT_CE: Configuration error interrupt mask - * @arg DMA2D_IT_CTC: C-LUT transfer complete interrupt mask - * @arg DMA2D_IT_CAE: C-LUT access error interrupt mask - * @arg DMA2D_IT_TW: Transfer Watermark interrupt mask - * @arg DMA2D_IT_TC: Transfer complete interrupt mask - * @arg DMA2D_IT_TE: Transfer error interrupt mask - * @retval The state of INTERRUPT. - */ -#define __HAL_DMA2D_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR & (__INTERRUPT__)) -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup DMA2D_Exported_Functions DMA2D Exported Functions - * @{ - */ -/* Initialization and de-initialization functions *******************************/ -HAL_StatusTypeDef HAL_DMA2D_Init(DMA2D_HandleTypeDef *hdma2d); -HAL_StatusTypeDef HAL_DMA2D_DeInit (DMA2D_HandleTypeDef *hdma2d); -void HAL_DMA2D_MspInit(DMA2D_HandleTypeDef* hdma2d); -void HAL_DMA2D_MspDeInit(DMA2D_HandleTypeDef* hdma2d); - -/* IO operation functions *******************************************************/ -HAL_StatusTypeDef HAL_DMA2D_Start(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height); -HAL_StatusTypeDef HAL_DMA2D_BlendingStart(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height); -HAL_StatusTypeDef HAL_DMA2D_Start_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t pdata, uint32_t DstAddress, uint32_t Width, uint32_t Height); -HAL_StatusTypeDef HAL_DMA2D_BlendingStart_IT(DMA2D_HandleTypeDef *hdma2d, uint32_t SrcAddress1, uint32_t SrcAddress2, uint32_t DstAddress, uint32_t Width, uint32_t Height); -HAL_StatusTypeDef HAL_DMA2D_Suspend(DMA2D_HandleTypeDef *hdma2d); -HAL_StatusTypeDef HAL_DMA2D_Resume(DMA2D_HandleTypeDef *hdma2d); -HAL_StatusTypeDef HAL_DMA2D_Abort(DMA2D_HandleTypeDef *hdma2d); -HAL_StatusTypeDef HAL_DMA2D_PollForTransfer(DMA2D_HandleTypeDef *hdma2d, uint32_t Timeout); -void HAL_DMA2D_IRQHandler(DMA2D_HandleTypeDef *hdma2d); - -/* Peripheral Control functions *************************************************/ -HAL_StatusTypeDef HAL_DMA2D_ConfigLayer(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_DMA2D_ConfigCLUT(DMA2D_HandleTypeDef *hdma2d, DMA2D_CLUTCfgTypeDef CLUTCfg, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_DMA2D_EnableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_DMA2D_DisableCLUT(DMA2D_HandleTypeDef *hdma2d, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_DMA2D_ProgramLineEvent(DMA2D_HandleTypeDef *hdma2d, uint32_t Line); - -/* Peripheral State functions ***************************************************/ -HAL_DMA2D_StateTypeDef HAL_DMA2D_GetState(DMA2D_HandleTypeDef *hdma2d); -uint32_t HAL_DMA2D_GetError(DMA2D_HandleTypeDef *hdma2d); -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/** @defgroup DMA2D_Private_Types DMA2D Private Types - * @{ - */ - -/** - * @} - */ - -/* Private defines -------------------------------------------------------------*/ -/** @defgroup DMA2D_Private_Defines DMA2D Private Defines - * @{ - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup DMA2D_Private_Variables DMA2D Private Variables - * @{ - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup DMA2D_Private_Constants DMA2D Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup DMA2D_Private_Macros DMA2D Private Macros - * @{ - */ -#define IS_DMA2D_LAYER(LAYER) ((LAYER) <= MAX_DMA2D_LAYER) -#define IS_DMA2D_MODE(MODE) (((MODE) == DMA2D_M2M) || ((MODE) == DMA2D_M2M_PFC) || \ - ((MODE) == DMA2D_M2M_BLEND) || ((MODE) == DMA2D_R2M)) -#define IS_DMA2D_CMODE(MODE_ARGB) (((MODE_ARGB) == DMA2D_ARGB8888) || ((MODE_ARGB) == DMA2D_RGB888) || \ - ((MODE_ARGB) == DMA2D_RGB565) || ((MODE_ARGB) == DMA2D_ARGB1555) || \ - ((MODE_ARGB) == DMA2D_ARGB4444)) -#define IS_DMA2D_COLOR(COLOR) ((COLOR) <= COLOR_VALUE) -#define IS_DMA2D_LINE(LINE) ((LINE) <= DMA2D_LINE) -#define IS_DMA2D_PIXEL(PIXEL) ((PIXEL) <= DMA2D_PIXEL) -#define IS_DMA2D_OFFSET(OOFFSET) ((OOFFSET) <= DMA2D_OFFSET) -#define IS_DMA2D_INPUT_COLOR_MODE(INPUT_CM) (((INPUT_CM) == CM_ARGB8888) || ((INPUT_CM) == CM_RGB888) || \ - ((INPUT_CM) == CM_RGB565) || ((INPUT_CM) == CM_ARGB1555) || \ - ((INPUT_CM) == CM_ARGB4444) || ((INPUT_CM) == CM_L8) || \ - ((INPUT_CM) == CM_AL44) || ((INPUT_CM) == CM_AL88) || \ - ((INPUT_CM) == CM_L4) || ((INPUT_CM) == CM_A8) || \ - ((INPUT_CM) == CM_A4)) -#define IS_DMA2D_ALPHA_MODE(AlphaMode) (((AlphaMode) == DMA2D_NO_MODIF_ALPHA) || \ - ((AlphaMode) == DMA2D_REPLACE_ALPHA) || \ - ((AlphaMode) == DMA2D_COMBINE_ALPHA)) -#define IS_DMA2D_CLUT_CM(CLUT_CM) (((CLUT_CM) == DMA2D_CCM_ARGB8888) || ((CLUT_CM) == DMA2D_CCM_RGB888)) -#define IS_DMA2D_CLUT_SIZE(CLUT_SIZE) ((CLUT_SIZE) <= DMA2D_CLUT_SIZE) -#define IS_DMA2D_LineWatermark(LineWatermark) ((LineWatermark) <= LINE_WATERMARK) -/** - * @} - */ - -/* Private functions prototypes ---------------------------------------------------------*/ -/** @defgroup DMA2D_Private_Functions_Prototypes DMA2D Private Functions Prototypes - * @{ - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup DMA2D_Private_Functions DMA2D Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_DMA2D_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h deleted file mode 100644 index 62ccbf0..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_dma_ex.h +++ /dev/null @@ -1,123 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_dma_ex.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of DMA HAL extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_DMA_EX_H -#define __STM32F4xx_HAL_DMA_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup DMAEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup DMAEx_Exported_Types DMAEx Exported Types - * @brief DMAEx Exported types - * @{ - */ - -/** - * @brief HAL DMA Memory definition - */ -typedef enum -{ - MEMORY0 = 0x00, /*!< Memory 0 */ - MEMORY1 = 0x01, /*!< Memory 1 */ - -}HAL_DMA_MemoryTypeDef; - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup DMAEx_Exported_Functions DMAEx Exported Functions - * @brief DMAEx Exported functions - * @{ - */ - -/** @defgroup DMAEx_Exported_Functions_Group1 Extended features functions - * @brief Extended features functions - * @{ - */ - -/* IO operation functions *******************************************************/ -HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMAEx_MultiBufferStart_IT(DMA_HandleTypeDef *hdma, uint32_t SrcAddress, uint32_t DstAddress, uint32_t SecondMemAddress, uint32_t DataLength); -HAL_StatusTypeDef HAL_DMAEx_ChangeMemory(DMA_HandleTypeDef *hdma, uint32_t Address, HAL_DMA_MemoryTypeDef memory); - -/** - * @} - */ -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup DMAEx_Private_Functions DMAEx Private Functions - * @brief DMAEx Private functions - * @{ - */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /*__STM32F4xx_HAL_DMA_EX_H*/ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_eth.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_eth.h deleted file mode 100644 index 17678fd..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_eth.h +++ /dev/null @@ -1,2217 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_eth.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of ETH HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_ETH_H -#define __STM32F4xx_HAL_ETH_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup ETH - * @{ - */ - -/** @addtogroup ETH_Private_Macros - * @{ - */ -#define IS_ETH_PHY_ADDRESS(ADDRESS) ((ADDRESS) <= 0x20) -#define IS_ETH_AUTONEGOTIATION(CMD) (((CMD) == ETH_AUTONEGOTIATION_ENABLE) || \ - ((CMD) == ETH_AUTONEGOTIATION_DISABLE)) -#define IS_ETH_SPEED(SPEED) (((SPEED) == ETH_SPEED_10M) || \ - ((SPEED) == ETH_SPEED_100M)) -#define IS_ETH_DUPLEX_MODE(MODE) (((MODE) == ETH_MODE_FULLDUPLEX) || \ - ((MODE) == ETH_MODE_HALFDUPLEX)) -#define IS_ETH_RX_MODE(MODE) (((MODE) == ETH_RXPOLLING_MODE) || \ - ((MODE) == ETH_RXINTERRUPT_MODE)) -#define IS_ETH_CHECKSUM_MODE(MODE) (((MODE) == ETH_CHECKSUM_BY_HARDWARE) || \ - ((MODE) == ETH_CHECKSUM_BY_SOFTWARE)) -#define IS_ETH_MEDIA_INTERFACE(MODE) (((MODE) == ETH_MEDIA_INTERFACE_MII) || \ - ((MODE) == ETH_MEDIA_INTERFACE_RMII)) -#define IS_ETH_WATCHDOG(CMD) (((CMD) == ETH_WATCHDOG_ENABLE) || \ - ((CMD) == ETH_WATCHDOG_DISABLE)) -#define IS_ETH_JABBER(CMD) (((CMD) == ETH_JABBER_ENABLE) || \ - ((CMD) == ETH_JABBER_DISABLE)) -#define IS_ETH_INTER_FRAME_GAP(GAP) (((GAP) == ETH_INTERFRAMEGAP_96BIT) || \ - ((GAP) == ETH_INTERFRAMEGAP_88BIT) || \ - ((GAP) == ETH_INTERFRAMEGAP_80BIT) || \ - ((GAP) == ETH_INTERFRAMEGAP_72BIT) || \ - ((GAP) == ETH_INTERFRAMEGAP_64BIT) || \ - ((GAP) == ETH_INTERFRAMEGAP_56BIT) || \ - ((GAP) == ETH_INTERFRAMEGAP_48BIT) || \ - ((GAP) == ETH_INTERFRAMEGAP_40BIT)) -#define IS_ETH_CARRIER_SENSE(CMD) (((CMD) == ETH_CARRIERSENCE_ENABLE) || \ - ((CMD) == ETH_CARRIERSENCE_DISABLE)) -#define IS_ETH_RECEIVE_OWN(CMD) (((CMD) == ETH_RECEIVEOWN_ENABLE) || \ - ((CMD) == ETH_RECEIVEOWN_DISABLE)) -#define IS_ETH_LOOPBACK_MODE(CMD) (((CMD) == ETH_LOOPBACKMODE_ENABLE) || \ - ((CMD) == ETH_LOOPBACKMODE_DISABLE)) -#define IS_ETH_CHECKSUM_OFFLOAD(CMD) (((CMD) == ETH_CHECKSUMOFFLAOD_ENABLE) || \ - ((CMD) == ETH_CHECKSUMOFFLAOD_DISABLE)) -#define IS_ETH_RETRY_TRANSMISSION(CMD) (((CMD) == ETH_RETRYTRANSMISSION_ENABLE) || \ - ((CMD) == ETH_RETRYTRANSMISSION_DISABLE)) -#define IS_ETH_AUTOMATIC_PADCRC_STRIP(CMD) (((CMD) == ETH_AUTOMATICPADCRCSTRIP_ENABLE) || \ - ((CMD) == ETH_AUTOMATICPADCRCSTRIP_DISABLE)) -#define IS_ETH_BACKOFF_LIMIT(LIMIT) (((LIMIT) == ETH_BACKOFFLIMIT_10) || \ - ((LIMIT) == ETH_BACKOFFLIMIT_8) || \ - ((LIMIT) == ETH_BACKOFFLIMIT_4) || \ - ((LIMIT) == ETH_BACKOFFLIMIT_1)) -#define IS_ETH_DEFERRAL_CHECK(CMD) (((CMD) == ETH_DEFFERRALCHECK_ENABLE) || \ - ((CMD) == ETH_DEFFERRALCHECK_DISABLE)) -#define IS_ETH_RECEIVE_ALL(CMD) (((CMD) == ETH_RECEIVEALL_ENABLE) || \ - ((CMD) == ETH_RECEIVEAll_DISABLE)) -#define IS_ETH_SOURCE_ADDR_FILTER(CMD) (((CMD) == ETH_SOURCEADDRFILTER_NORMAL_ENABLE) || \ - ((CMD) == ETH_SOURCEADDRFILTER_INVERSE_ENABLE) || \ - ((CMD) == ETH_SOURCEADDRFILTER_DISABLE)) -#define IS_ETH_CONTROL_FRAMES(PASS) (((PASS) == ETH_PASSCONTROLFRAMES_BLOCKALL) || \ - ((PASS) == ETH_PASSCONTROLFRAMES_FORWARDALL) || \ - ((PASS) == ETH_PASSCONTROLFRAMES_FORWARDPASSEDADDRFILTER)) -#define IS_ETH_BROADCAST_FRAMES_RECEPTION(CMD) (((CMD) == ETH_BROADCASTFRAMESRECEPTION_ENABLE) || \ - ((CMD) == ETH_BROADCASTFRAMESRECEPTION_DISABLE)) -#define IS_ETH_DESTINATION_ADDR_FILTER(FILTER) (((FILTER) == ETH_DESTINATIONADDRFILTER_NORMAL) || \ - ((FILTER) == ETH_DESTINATIONADDRFILTER_INVERSE)) -#define IS_ETH_PROMISCUOUS_MODE(CMD) (((CMD) == ETH_PROMISCUOUS_MODE_ENABLE) || \ - ((CMD) == ETH_PROMISCUOUS_MODE_DISABLE)) -#define IS_ETH_MULTICAST_FRAMES_FILTER(FILTER) (((FILTER) == ETH_MULTICASTFRAMESFILTER_PERFECTHASHTABLE) || \ - ((FILTER) == ETH_MULTICASTFRAMESFILTER_HASHTABLE) || \ - ((FILTER) == ETH_MULTICASTFRAMESFILTER_PERFECT) || \ - ((FILTER) == ETH_MULTICASTFRAMESFILTER_NONE)) -#define IS_ETH_UNICAST_FRAMES_FILTER(FILTER) (((FILTER) == ETH_UNICASTFRAMESFILTER_PERFECTHASHTABLE) || \ - ((FILTER) == ETH_UNICASTFRAMESFILTER_HASHTABLE) || \ - ((FILTER) == ETH_UNICASTFRAMESFILTER_PERFECT)) -#define IS_ETH_PAUSE_TIME(TIME) ((TIME) <= 0xFFFF) -#define IS_ETH_ZEROQUANTA_PAUSE(CMD) (((CMD) == ETH_ZEROQUANTAPAUSE_ENABLE) || \ - ((CMD) == ETH_ZEROQUANTAPAUSE_DISABLE)) -#define IS_ETH_PAUSE_LOW_THRESHOLD(THRESHOLD) (((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS4) || \ - ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS28) || \ - ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS144) || \ - ((THRESHOLD) == ETH_PAUSELOWTHRESHOLD_MINUS256)) -#define IS_ETH_UNICAST_PAUSE_FRAME_DETECT(CMD) (((CMD) == ETH_UNICASTPAUSEFRAMEDETECT_ENABLE) || \ - ((CMD) == ETH_UNICASTPAUSEFRAMEDETECT_DISABLE)) -#define IS_ETH_RECEIVE_FLOWCONTROL(CMD) (((CMD) == ETH_RECEIVEFLOWCONTROL_ENABLE) || \ - ((CMD) == ETH_RECEIVEFLOWCONTROL_DISABLE)) -#define IS_ETH_TRANSMIT_FLOWCONTROL(CMD) (((CMD) == ETH_TRANSMITFLOWCONTROL_ENABLE) || \ - ((CMD) == ETH_TRANSMITFLOWCONTROL_DISABLE)) -#define IS_ETH_VLAN_TAG_COMPARISON(COMPARISON) (((COMPARISON) == ETH_VLANTAGCOMPARISON_12BIT) || \ - ((COMPARISON) == ETH_VLANTAGCOMPARISON_16BIT)) -#define IS_ETH_VLAN_TAG_IDENTIFIER(IDENTIFIER) ((IDENTIFIER) <= 0xFFFF) -#define IS_ETH_MAC_ADDRESS0123(ADDRESS) (((ADDRESS) == ETH_MAC_ADDRESS0) || \ - ((ADDRESS) == ETH_MAC_ADDRESS1) || \ - ((ADDRESS) == ETH_MAC_ADDRESS2) || \ - ((ADDRESS) == ETH_MAC_ADDRESS3)) -#define IS_ETH_MAC_ADDRESS123(ADDRESS) (((ADDRESS) == ETH_MAC_ADDRESS1) || \ - ((ADDRESS) == ETH_MAC_ADDRESS2) || \ - ((ADDRESS) == ETH_MAC_ADDRESS3)) -#define IS_ETH_MAC_ADDRESS_FILTER(FILTER) (((FILTER) == ETH_MAC_ADDRESSFILTER_SA) || \ - ((FILTER) == ETH_MAC_ADDRESSFILTER_DA)) -#define IS_ETH_MAC_ADDRESS_MASK(MASK) (((MASK) == ETH_MAC_ADDRESSMASK_BYTE6) || \ - ((MASK) == ETH_MAC_ADDRESSMASK_BYTE5) || \ - ((MASK) == ETH_MAC_ADDRESSMASK_BYTE4) || \ - ((MASK) == ETH_MAC_ADDRESSMASK_BYTE3) || \ - ((MASK) == ETH_MAC_ADDRESSMASK_BYTE2) || \ - ((MASK) == ETH_MAC_ADDRESSMASK_BYTE1)) -#define IS_ETH_DROP_TCPIP_CHECKSUM_FRAME(CMD) (((CMD) == ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE) || \ - ((CMD) == ETH_DROPTCPIPCHECKSUMERRORFRAME_DISABLE)) -#define IS_ETH_RECEIVE_STORE_FORWARD(CMD) (((CMD) == ETH_RECEIVESTOREFORWARD_ENABLE) || \ - ((CMD) == ETH_RECEIVESTOREFORWARD_DISABLE)) -#define IS_ETH_FLUSH_RECEIVE_FRAME(CMD) (((CMD) == ETH_FLUSHRECEIVEDFRAME_ENABLE) || \ - ((CMD) == ETH_FLUSHRECEIVEDFRAME_DISABLE)) -#define IS_ETH_TRANSMIT_STORE_FORWARD(CMD) (((CMD) == ETH_TRANSMITSTOREFORWARD_ENABLE) || \ - ((CMD) == ETH_TRANSMITSTOREFORWARD_DISABLE)) -#define IS_ETH_TRANSMIT_THRESHOLD_CONTROL(THRESHOLD) (((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_64BYTES) || \ - ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_128BYTES) || \ - ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_192BYTES) || \ - ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_256BYTES) || \ - ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_40BYTES) || \ - ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_32BYTES) || \ - ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_24BYTES) || \ - ((THRESHOLD) == ETH_TRANSMITTHRESHOLDCONTROL_16BYTES)) -#define IS_ETH_FORWARD_ERROR_FRAMES(CMD) (((CMD) == ETH_FORWARDERRORFRAMES_ENABLE) || \ - ((CMD) == ETH_FORWARDERRORFRAMES_DISABLE)) -#define IS_ETH_FORWARD_UNDERSIZED_GOOD_FRAMES(CMD) (((CMD) == ETH_FORWARDUNDERSIZEDGOODFRAMES_ENABLE) || \ - ((CMD) == ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE)) -#define IS_ETH_RECEIVE_THRESHOLD_CONTROL(THRESHOLD) (((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES) || \ - ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_32BYTES) || \ - ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_96BYTES) || \ - ((THRESHOLD) == ETH_RECEIVEDTHRESHOLDCONTROL_128BYTES)) -#define IS_ETH_SECOND_FRAME_OPERATE(CMD) (((CMD) == ETH_SECONDFRAMEOPERARTE_ENABLE) || \ - ((CMD) == ETH_SECONDFRAMEOPERARTE_DISABLE)) -#define IS_ETH_ADDRESS_ALIGNED_BEATS(CMD) (((CMD) == ETH_ADDRESSALIGNEDBEATS_ENABLE) || \ - ((CMD) == ETH_ADDRESSALIGNEDBEATS_DISABLE)) -#define IS_ETH_FIXED_BURST(CMD) (((CMD) == ETH_FIXEDBURST_ENABLE) || \ - ((CMD) == ETH_FIXEDBURST_DISABLE)) -#define IS_ETH_RXDMA_BURST_LENGTH(LENGTH) (((LENGTH) == ETH_RXDMABURSTLENGTH_1BEAT) || \ - ((LENGTH) == ETH_RXDMABURSTLENGTH_2BEAT) || \ - ((LENGTH) == ETH_RXDMABURSTLENGTH_4BEAT) || \ - ((LENGTH) == ETH_RXDMABURSTLENGTH_8BEAT) || \ - ((LENGTH) == ETH_RXDMABURSTLENGTH_16BEAT) || \ - ((LENGTH) == ETH_RXDMABURSTLENGTH_32BEAT) || \ - ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_4BEAT) || \ - ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_8BEAT) || \ - ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_16BEAT) || \ - ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_32BEAT) || \ - ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_64BEAT) || \ - ((LENGTH) == ETH_RXDMABURSTLENGTH_4XPBL_128BEAT)) -#define IS_ETH_TXDMA_BURST_LENGTH(LENGTH) (((LENGTH) == ETH_TXDMABURSTLENGTH_1BEAT) || \ - ((LENGTH) == ETH_TXDMABURSTLENGTH_2BEAT) || \ - ((LENGTH) == ETH_TXDMABURSTLENGTH_4BEAT) || \ - ((LENGTH) == ETH_TXDMABURSTLENGTH_8BEAT) || \ - ((LENGTH) == ETH_TXDMABURSTLENGTH_16BEAT) || \ - ((LENGTH) == ETH_TXDMABURSTLENGTH_32BEAT) || \ - ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_4BEAT) || \ - ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_8BEAT) || \ - ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_16BEAT) || \ - ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_32BEAT) || \ - ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_64BEAT) || \ - ((LENGTH) == ETH_TXDMABURSTLENGTH_4XPBL_128BEAT)) -#define IS_ETH_DMA_DESC_SKIP_LENGTH(LENGTH) ((LENGTH) <= 0x1F) -#define IS_ETH_DMA_ARBITRATION_ROUNDROBIN_RXTX(RATIO) (((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1) || \ - ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_2_1) || \ - ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_3_1) || \ - ((RATIO) == ETH_DMAARBITRATION_ROUNDROBIN_RXTX_4_1) || \ - ((RATIO) == ETH_DMAARBITRATION_RXPRIORTX)) -#define IS_ETH_DMATXDESC_GET_FLAG(FLAG) (((FLAG) == ETH_DMATXDESC_OWN) || \ - ((FLAG) == ETH_DMATXDESC_IC) || \ - ((FLAG) == ETH_DMATXDESC_LS) || \ - ((FLAG) == ETH_DMATXDESC_FS) || \ - ((FLAG) == ETH_DMATXDESC_DC) || \ - ((FLAG) == ETH_DMATXDESC_DP) || \ - ((FLAG) == ETH_DMATXDESC_TTSE) || \ - ((FLAG) == ETH_DMATXDESC_TER) || \ - ((FLAG) == ETH_DMATXDESC_TCH) || \ - ((FLAG) == ETH_DMATXDESC_TTSS) || \ - ((FLAG) == ETH_DMATXDESC_IHE) || \ - ((FLAG) == ETH_DMATXDESC_ES) || \ - ((FLAG) == ETH_DMATXDESC_JT) || \ - ((FLAG) == ETH_DMATXDESC_FF) || \ - ((FLAG) == ETH_DMATXDESC_PCE) || \ - ((FLAG) == ETH_DMATXDESC_LCA) || \ - ((FLAG) == ETH_DMATXDESC_NC) || \ - ((FLAG) == ETH_DMATXDESC_LCO) || \ - ((FLAG) == ETH_DMATXDESC_EC) || \ - ((FLAG) == ETH_DMATXDESC_VF) || \ - ((FLAG) == ETH_DMATXDESC_CC) || \ - ((FLAG) == ETH_DMATXDESC_ED) || \ - ((FLAG) == ETH_DMATXDESC_UF) || \ - ((FLAG) == ETH_DMATXDESC_DB)) -#define IS_ETH_DMA_TXDESC_SEGMENT(SEGMENT) (((SEGMENT) == ETH_DMATXDESC_LASTSEGMENTS) || \ - ((SEGMENT) == ETH_DMATXDESC_FIRSTSEGMENT)) -#define IS_ETH_DMA_TXDESC_CHECKSUM(CHECKSUM) (((CHECKSUM) == ETH_DMATXDESC_CHECKSUMBYPASS) || \ - ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMIPV4HEADER) || \ - ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT) || \ - ((CHECKSUM) == ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL)) -#define IS_ETH_DMATXDESC_BUFFER_SIZE(SIZE) ((SIZE) <= 0x1FFF) -#define IS_ETH_DMARXDESC_GET_FLAG(FLAG) (((FLAG) == ETH_DMARXDESC_OWN) || \ - ((FLAG) == ETH_DMARXDESC_AFM) || \ - ((FLAG) == ETH_DMARXDESC_ES) || \ - ((FLAG) == ETH_DMARXDESC_DE) || \ - ((FLAG) == ETH_DMARXDESC_SAF) || \ - ((FLAG) == ETH_DMARXDESC_LE) || \ - ((FLAG) == ETH_DMARXDESC_OE) || \ - ((FLAG) == ETH_DMARXDESC_VLAN) || \ - ((FLAG) == ETH_DMARXDESC_FS) || \ - ((FLAG) == ETH_DMARXDESC_LS) || \ - ((FLAG) == ETH_DMARXDESC_IPV4HCE) || \ - ((FLAG) == ETH_DMARXDESC_LC) || \ - ((FLAG) == ETH_DMARXDESC_FT) || \ - ((FLAG) == ETH_DMARXDESC_RWT) || \ - ((FLAG) == ETH_DMARXDESC_RE) || \ - ((FLAG) == ETH_DMARXDESC_DBE) || \ - ((FLAG) == ETH_DMARXDESC_CE) || \ - ((FLAG) == ETH_DMARXDESC_MAMPCE)) -#define IS_ETH_DMA_RXDESC_BUFFER(BUFFER) (((BUFFER) == ETH_DMARXDESC_BUFFER1) || \ - ((BUFFER) == ETH_DMARXDESC_BUFFER2)) -#define IS_ETH_PMT_GET_FLAG(FLAG) (((FLAG) == ETH_PMT_FLAG_WUFR) || \ - ((FLAG) == ETH_PMT_FLAG_MPR)) -#define IS_ETH_DMA_FLAG(FLAG) ((((FLAG) & (uint32_t)0xC7FE1800) == 0x00) && ((FLAG) != 0x00)) -#define IS_ETH_DMA_GET_FLAG(FLAG) (((FLAG) == ETH_DMA_FLAG_TST) || ((FLAG) == ETH_DMA_FLAG_PMT) || \ - ((FLAG) == ETH_DMA_FLAG_MMC) || ((FLAG) == ETH_DMA_FLAG_DATATRANSFERERROR) || \ - ((FLAG) == ETH_DMA_FLAG_READWRITEERROR) || ((FLAG) == ETH_DMA_FLAG_ACCESSERROR) || \ - ((FLAG) == ETH_DMA_FLAG_NIS) || ((FLAG) == ETH_DMA_FLAG_AIS) || \ - ((FLAG) == ETH_DMA_FLAG_ER) || ((FLAG) == ETH_DMA_FLAG_FBE) || \ - ((FLAG) == ETH_DMA_FLAG_ET) || ((FLAG) == ETH_DMA_FLAG_RWT) || \ - ((FLAG) == ETH_DMA_FLAG_RPS) || ((FLAG) == ETH_DMA_FLAG_RBU) || \ - ((FLAG) == ETH_DMA_FLAG_R) || ((FLAG) == ETH_DMA_FLAG_TU) || \ - ((FLAG) == ETH_DMA_FLAG_RO) || ((FLAG) == ETH_DMA_FLAG_TJT) || \ - ((FLAG) == ETH_DMA_FLAG_TBU) || ((FLAG) == ETH_DMA_FLAG_TPS) || \ - ((FLAG) == ETH_DMA_FLAG_T)) -#define IS_ETH_MAC_IT(IT) ((((IT) & (uint32_t)0xFFFFFDF1) == 0x00) && ((IT) != 0x00)) -#define IS_ETH_MAC_GET_IT(IT) (((IT) == ETH_MAC_IT_TST) || ((IT) == ETH_MAC_IT_MMCT) || \ - ((IT) == ETH_MAC_IT_MMCR) || ((IT) == ETH_MAC_IT_MMC) || \ - ((IT) == ETH_MAC_IT_PMT)) -#define IS_ETH_MAC_GET_FLAG(FLAG) (((FLAG) == ETH_MAC_FLAG_TST) || ((FLAG) == ETH_MAC_FLAG_MMCT) || \ - ((FLAG) == ETH_MAC_FLAG_MMCR) || ((FLAG) == ETH_MAC_FLAG_MMC) || \ - ((FLAG) == ETH_MAC_FLAG_PMT)) -#define IS_ETH_DMA_IT(IT) ((((IT) & (uint32_t)0xC7FE1800) == 0x00) && ((IT) != 0x00)) -#define IS_ETH_DMA_GET_IT(IT) (((IT) == ETH_DMA_IT_TST) || ((IT) == ETH_DMA_IT_PMT) || \ - ((IT) == ETH_DMA_IT_MMC) || ((IT) == ETH_DMA_IT_NIS) || \ - ((IT) == ETH_DMA_IT_AIS) || ((IT) == ETH_DMA_IT_ER) || \ - ((IT) == ETH_DMA_IT_FBE) || ((IT) == ETH_DMA_IT_ET) || \ - ((IT) == ETH_DMA_IT_RWT) || ((IT) == ETH_DMA_IT_RPS) || \ - ((IT) == ETH_DMA_IT_RBU) || ((IT) == ETH_DMA_IT_R) || \ - ((IT) == ETH_DMA_IT_TU) || ((IT) == ETH_DMA_IT_RO) || \ - ((IT) == ETH_DMA_IT_TJT) || ((IT) == ETH_DMA_IT_TBU) || \ - ((IT) == ETH_DMA_IT_TPS) || ((IT) == ETH_DMA_IT_T)) -#define IS_ETH_DMA_GET_OVERFLOW(OVERFLOW) (((OVERFLOW) == ETH_DMA_OVERFLOW_RXFIFOCOUNTER) || \ - ((OVERFLOW) == ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER)) -#define IS_ETH_MMC_IT(IT) (((((IT) & (uint32_t)0xFFDF3FFF) == 0x00) || (((IT) & (uint32_t)0xEFFDFF9F) == 0x00)) && \ - ((IT) != 0x00)) -#define IS_ETH_MMC_GET_IT(IT) (((IT) == ETH_MMC_IT_TGF) || ((IT) == ETH_MMC_IT_TGFMSC) || \ - ((IT) == ETH_MMC_IT_TGFSC) || ((IT) == ETH_MMC_IT_RGUF) || \ - ((IT) == ETH_MMC_IT_RFAE) || ((IT) == ETH_MMC_IT_RFCE)) -#define IS_ETH_ENHANCED_DESCRIPTOR_FORMAT(CMD) (((CMD) == ETH_DMAENHANCEDDESCRIPTOR_ENABLE) || \ - ((CMD) == ETH_DMAENHANCEDDESCRIPTOR_DISABLE)) - - -/** - * @} - */ - -/** @addtogroup ETH_Private_Defines - * @{ - */ -/* Delay to wait when writing to some Ethernet registers */ -#define ETH_REG_WRITE_DELAY ((uint32_t)0x00000001) - -/* ETHERNET Errors */ -#define ETH_SUCCESS ((uint32_t)0) -#define ETH_ERROR ((uint32_t)1) - -/* ETHERNET DMA Tx descriptors Collision Count Shift */ -#define ETH_DMATXDESC_COLLISION_COUNTSHIFT ((uint32_t)3) - -/* ETHERNET DMA Tx descriptors Buffer2 Size Shift */ -#define ETH_DMATXDESC_BUFFER2_SIZESHIFT ((uint32_t)16) - -/* ETHERNET DMA Rx descriptors Frame Length Shift */ -#define ETH_DMARXDESC_FRAME_LENGTHSHIFT ((uint32_t)16) - -/* ETHERNET DMA Rx descriptors Buffer2 Size Shift */ -#define ETH_DMARXDESC_BUFFER2_SIZESHIFT ((uint32_t)16) - -/* ETHERNET DMA Rx descriptors Frame length Shift */ -#define ETH_DMARXDESC_FRAMELENGTHSHIFT ((uint32_t)16) - -/* ETHERNET MAC address offsets */ -#define ETH_MAC_ADDR_HBASE (uint32_t)(ETH_MAC_BASE + (uint32_t)0x40) /* ETHERNET MAC address high offset */ -#define ETH_MAC_ADDR_LBASE (uint32_t)(ETH_MAC_BASE + (uint32_t)0x44) /* ETHERNET MAC address low offset */ - -/* ETHERNET MACMIIAR register Mask */ -#define ETH_MACMIIAR_CR_MASK ((uint32_t)0xFFFFFFE3) - -/* ETHERNET MACCR register Mask */ -#define ETH_MACCR_CLEAR_MASK ((uint32_t)0xFF20810F) - -/* ETHERNET MACFCR register Mask */ -#define ETH_MACFCR_CLEAR_MASK ((uint32_t)0x0000FF41) - -/* ETHERNET DMAOMR register Mask */ -#define ETH_DMAOMR_CLEAR_MASK ((uint32_t)0xF8DE3F23) - -/* ETHERNET Remote Wake-up frame register length */ -#define ETH_WAKEUP_REGISTER_LENGTH 8 - -/* ETHERNET Missed frames counter Shift */ -#define ETH_DMA_RX_OVERFLOW_MISSEDFRAMES_COUNTERSHIFT 17 - /** - * @} - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup ETH_Exported_Types ETH Exported Types - * @{ - */ - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_ETH_STATE_RESET = 0x00, /*!< Peripheral not yet Initialized or disabled */ - HAL_ETH_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ - HAL_ETH_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ - HAL_ETH_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ - HAL_ETH_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ - HAL_ETH_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ - HAL_ETH_STATE_BUSY_WR = 0x42, /*!< Write process is ongoing */ - HAL_ETH_STATE_BUSY_RD = 0x82, /*!< Read process is ongoing */ - HAL_ETH_STATE_TIMEOUT = 0x03, /*!< Timeout state */ - HAL_ETH_STATE_ERROR = 0x04 /*!< Reception process is ongoing */ -}HAL_ETH_StateTypeDef; - -/** - * @brief ETH Init Structure definition - */ - -typedef struct -{ - uint32_t AutoNegotiation; /*!< Selects or not the AutoNegotiation mode for the external PHY - The AutoNegotiation allows an automatic setting of the Speed (10/100Mbps) - and the mode (half/full-duplex). - This parameter can be a value of @ref ETH_AutoNegotiation */ - - uint32_t Speed; /*!< Sets the Ethernet speed: 10/100 Mbps. - This parameter can be a value of @ref ETH_Speed */ - - uint32_t DuplexMode; /*!< Selects the MAC duplex mode: Half-Duplex or Full-Duplex mode - This parameter can be a value of @ref ETH_Duplex_Mode */ - - uint16_t PhyAddress; /*!< Ethernet PHY address. - This parameter must be a number between Min_Data = 0 and Max_Data = 32 */ - - uint8_t *MACAddr; /*!< MAC Address of used Hardware: must be pointer on an array of 6 bytes */ - - uint32_t RxMode; /*!< Selects the Ethernet Rx mode: Polling mode, Interrupt mode. - This parameter can be a value of @ref ETH_Rx_Mode */ - - uint32_t ChecksumMode; /*!< Selects if the checksum is check by hardware or by software. - This parameter can be a value of @ref ETH_Checksum_Mode */ - - uint32_t MediaInterface ; /*!< Selects the media-independent interface or the reduced media-independent interface. - This parameter can be a value of @ref ETH_Media_Interface */ - -} ETH_InitTypeDef; - - - /** - * @brief ETH MAC Configuration Structure definition - */ - -typedef struct -{ - uint32_t Watchdog; /*!< Selects or not the Watchdog timer - When enabled, the MAC allows no more then 2048 bytes to be received. - When disabled, the MAC can receive up to 16384 bytes. - This parameter can be a value of @ref ETH_Watchdog */ - - uint32_t Jabber; /*!< Selects or not Jabber timer - When enabled, the MAC allows no more then 2048 bytes to be sent. - When disabled, the MAC can send up to 16384 bytes. - This parameter can be a value of @ref ETH_Jabber */ - - uint32_t InterFrameGap; /*!< Selects the minimum IFG between frames during transmission. - This parameter can be a value of @ref ETH_Inter_Frame_Gap */ - - uint32_t CarrierSense; /*!< Selects or not the Carrier Sense. - This parameter can be a value of @ref ETH_Carrier_Sense */ - - uint32_t ReceiveOwn; /*!< Selects or not the ReceiveOwn, - ReceiveOwn allows the reception of frames when the TX_EN signal is asserted - in Half-Duplex mode. - This parameter can be a value of @ref ETH_Receive_Own */ - - uint32_t LoopbackMode; /*!< Selects or not the internal MAC MII Loopback mode. - This parameter can be a value of @ref ETH_Loop_Back_Mode */ - - uint32_t ChecksumOffload; /*!< Selects or not the IPv4 checksum checking for received frame payloads' TCP/UDP/ICMP headers. - This parameter can be a value of @ref ETH_Checksum_Offload */ - - uint32_t RetryTransmission; /*!< Selects or not the MAC attempt retries transmission, based on the settings of BL, - when a collision occurs (Half-Duplex mode). - This parameter can be a value of @ref ETH_Retry_Transmission */ - - uint32_t AutomaticPadCRCStrip; /*!< Selects or not the Automatic MAC Pad/CRC Stripping. - This parameter can be a value of @ref ETH_Automatic_Pad_CRC_Strip */ - - uint32_t BackOffLimit; /*!< Selects the BackOff limit value. - This parameter can be a value of @ref ETH_Back_Off_Limit */ - - uint32_t DeferralCheck; /*!< Selects or not the deferral check function (Half-Duplex mode). - This parameter can be a value of @ref ETH_Deferral_Check */ - - uint32_t ReceiveAll; /*!< Selects or not all frames reception by the MAC (No filtering). - This parameter can be a value of @ref ETH_Receive_All */ - - uint32_t SourceAddrFilter; /*!< Selects the Source Address Filter mode. - This parameter can be a value of @ref ETH_Source_Addr_Filter */ - - uint32_t PassControlFrames; /*!< Sets the forwarding mode of the control frames (including unicast and multicast PAUSE frames) - This parameter can be a value of @ref ETH_Pass_Control_Frames */ - - uint32_t BroadcastFramesReception; /*!< Selects or not the reception of Broadcast Frames. - This parameter can be a value of @ref ETH_Broadcast_Frames_Reception */ - - uint32_t DestinationAddrFilter; /*!< Sets the destination filter mode for both unicast and multicast frames. - This parameter can be a value of @ref ETH_Destination_Addr_Filter */ - - uint32_t PromiscuousMode; /*!< Selects or not the Promiscuous Mode - This parameter can be a value of @ref ETH_Promiscuous_Mode */ - - uint32_t MulticastFramesFilter; /*!< Selects the Multicast Frames filter mode: None/HashTableFilter/PerfectFilter/PerfectHashTableFilter. - This parameter can be a value of @ref ETH_Multicast_Frames_Filter */ - - uint32_t UnicastFramesFilter; /*!< Selects the Unicast Frames filter mode: HashTableFilter/PerfectFilter/PerfectHashTableFilter. - This parameter can be a value of @ref ETH_Unicast_Frames_Filter */ - - uint32_t HashTableHigh; /*!< This field holds the higher 32 bits of Hash table. - This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFF */ - - uint32_t HashTableLow; /*!< This field holds the lower 32 bits of Hash table. - This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFFFFFF */ - - uint32_t PauseTime; /*!< This field holds the value to be used in the Pause Time field in the transmit control frame. - This parameter must be a number between Min_Data = 0x0 and Max_Data = 0xFFFF */ - - uint32_t ZeroQuantaPause; /*!< Selects or not the automatic generation of Zero-Quanta Pause Control frames. - This parameter can be a value of @ref ETH_Zero_Quanta_Pause */ - - uint32_t PauseLowThreshold; /*!< This field configures the threshold of the PAUSE to be checked for - automatic retransmission of PAUSE Frame. - This parameter can be a value of @ref ETH_Pause_Low_Threshold */ - - uint32_t UnicastPauseFrameDetect; /*!< Selects or not the MAC detection of the Pause frames (with MAC Address0 - unicast address and unique multicast address). - This parameter can be a value of @ref ETH_Unicast_Pause_Frame_Detect */ - - uint32_t ReceiveFlowControl; /*!< Enables or disables the MAC to decode the received Pause frame and - disable its transmitter for a specified time (Pause Time) - This parameter can be a value of @ref ETH_Receive_Flow_Control */ - - uint32_t TransmitFlowControl; /*!< Enables or disables the MAC to transmit Pause frames (Full-Duplex mode) - or the MAC back-pressure operation (Half-Duplex mode) - This parameter can be a value of @ref ETH_Transmit_Flow_Control */ - - uint32_t VLANTagComparison; /*!< Selects the 12-bit VLAN identifier or the complete 16-bit VLAN tag for - comparison and filtering. - This parameter can be a value of @ref ETH_VLAN_Tag_Comparison */ - - uint32_t VLANTagIdentifier; /*!< Holds the VLAN tag identifier for receive frames */ - -} ETH_MACInitTypeDef; - - -/** - * @brief ETH DMA Configuration Structure definition - */ - -typedef struct -{ - uint32_t DropTCPIPChecksumErrorFrame; /*!< Selects or not the Dropping of TCP/IP Checksum Error Frames. - This parameter can be a value of @ref ETH_Drop_TCP_IP_Checksum_Error_Frame */ - - uint32_t ReceiveStoreForward; /*!< Enables or disables the Receive store and forward mode. - This parameter can be a value of @ref ETH_Receive_Store_Forward */ - - uint32_t FlushReceivedFrame; /*!< Enables or disables the flushing of received frames. - This parameter can be a value of @ref ETH_Flush_Received_Frame */ - - uint32_t TransmitStoreForward; /*!< Enables or disables Transmit store and forward mode. - This parameter can be a value of @ref ETH_Transmit_Store_Forward */ - - uint32_t TransmitThresholdControl; /*!< Selects or not the Transmit Threshold Control. - This parameter can be a value of @ref ETH_Transmit_Threshold_Control */ - - uint32_t ForwardErrorFrames; /*!< Selects or not the forward to the DMA of erroneous frames. - This parameter can be a value of @ref ETH_Forward_Error_Frames */ - - uint32_t ForwardUndersizedGoodFrames; /*!< Enables or disables the Rx FIFO to forward Undersized frames (frames with no Error - and length less than 64 bytes) including pad-bytes and CRC) - This parameter can be a value of @ref ETH_Forward_Undersized_Good_Frames */ - - uint32_t ReceiveThresholdControl; /*!< Selects the threshold level of the Receive FIFO. - This parameter can be a value of @ref ETH_Receive_Threshold_Control */ - - uint32_t SecondFrameOperate; /*!< Selects or not the Operate on second frame mode, which allows the DMA to process a second - frame of Transmit data even before obtaining the status for the first frame. - This parameter can be a value of @ref ETH_Second_Frame_Operate */ - - uint32_t AddressAlignedBeats; /*!< Enables or disables the Address Aligned Beats. - This parameter can be a value of @ref ETH_Address_Aligned_Beats */ - - uint32_t FixedBurst; /*!< Enables or disables the AHB Master interface fixed burst transfers. - This parameter can be a value of @ref ETH_Fixed_Burst */ - - uint32_t RxDMABurstLength; /*!< Indicates the maximum number of beats to be transferred in one Rx DMA transaction. - This parameter can be a value of @ref ETH_Rx_DMA_Burst_Length */ - - uint32_t TxDMABurstLength; /*!< Indicates the maximum number of beats to be transferred in one Tx DMA transaction. - This parameter can be a value of @ref ETH_Tx_DMA_Burst_Length */ - - uint32_t EnhancedDescriptorFormat; /*!< Enables the enhanced descriptor format. - This parameter can be a value of @ref ETH_DMA_Enhanced_descriptor_format */ - - uint32_t DescriptorSkipLength; /*!< Specifies the number of word to skip between two unchained descriptors (Ring mode) - This parameter must be a number between Min_Data = 0 and Max_Data = 32 */ - - uint32_t DMAArbitration; /*!< Selects the DMA Tx/Rx arbitration. - This parameter can be a value of @ref ETH_DMA_Arbitration */ -} ETH_DMAInitTypeDef; - - -/** - * @brief ETH DMA Descriptors data structure definition - */ - -typedef struct -{ - __IO uint32_t Status; /*!< Status */ - - uint32_t ControlBufferSize; /*!< Control and Buffer1, Buffer2 lengths */ - - uint32_t Buffer1Addr; /*!< Buffer1 address pointer */ - - uint32_t Buffer2NextDescAddr; /*!< Buffer2 or next descriptor address pointer */ - - /*!< Enhanced ETHERNET DMA PTP Descriptors */ - uint32_t ExtendedStatus; /*!< Extended status for PTP receive descriptor */ - - uint32_t Reserved1; /*!< Reserved */ - - uint32_t TimeStampLow; /*!< Time Stamp Low value for transmit and receive */ - - uint32_t TimeStampHigh; /*!< Time Stamp High value for transmit and receive */ - -} ETH_DMADescTypeDef; - - -/** - * @brief Received Frame Informations structure definition - */ -typedef struct -{ - ETH_DMADescTypeDef *FSRxDesc; /*!< First Segment Rx Desc */ - - ETH_DMADescTypeDef *LSRxDesc; /*!< Last Segment Rx Desc */ - - uint32_t SegCount; /*!< Segment count */ - - uint32_t length; /*!< Frame length */ - - uint32_t buffer; /*!< Frame buffer */ - -} ETH_DMARxFrameInfos; - - -/** - * @brief ETH Handle Structure definition - */ - -typedef struct -{ - ETH_TypeDef *Instance; /*!< Register base address */ - - ETH_InitTypeDef Init; /*!< Ethernet Init Configuration */ - - uint32_t LinkStatus; /*!< Ethernet link status */ - - ETH_DMADescTypeDef *RxDesc; /*!< Rx descriptor to Get */ - - ETH_DMADescTypeDef *TxDesc; /*!< Tx descriptor to Set */ - - ETH_DMARxFrameInfos RxFrameInfos; /*!< last Rx frame infos */ - - __IO HAL_ETH_StateTypeDef State; /*!< ETH communication state */ - - HAL_LockTypeDef Lock; /*!< ETH Lock */ - -} ETH_HandleTypeDef; - - /** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup ETH_Exported_Constants ETH Exported Constants - * @{ - */ - -/** @defgroup ETH_Buffers_setting ETH Buffers setting - * @{ - */ -#define ETH_MAX_PACKET_SIZE ((uint32_t)1524) /*!< ETH_HEADER + ETH_EXTRA + ETH_VLAN_TAG + ETH_MAX_ETH_PAYLOAD + ETH_CRC */ -#define ETH_HEADER ((uint32_t)14) /*!< 6 byte Dest addr, 6 byte Src addr, 2 byte length/type */ -#define ETH_CRC ((uint32_t)4) /*!< Ethernet CRC */ -#define ETH_EXTRA ((uint32_t)2) /*!< Extra bytes in some cases */ -#define ETH_VLAN_TAG ((uint32_t)4) /*!< optional 802.1q VLAN Tag */ -#define ETH_MIN_ETH_PAYLOAD ((uint32_t)46) /*!< Minimum Ethernet payload size */ -#define ETH_MAX_ETH_PAYLOAD ((uint32_t)1500) /*!< Maximum Ethernet payload size */ -#define ETH_JUMBO_FRAME_PAYLOAD ((uint32_t)9000) /*!< Jumbo frame payload size */ - - /* Ethernet driver receive buffers are organized in a chained linked-list, when - an ethernet packet is received, the Rx-DMA will transfer the packet from RxFIFO - to the driver receive buffers memory. - - Depending on the size of the received ethernet packet and the size of - each ethernet driver receive buffer, the received packet can take one or more - ethernet driver receive buffer. - - In below are defined the size of one ethernet driver receive buffer ETH_RX_BUF_SIZE - and the total count of the driver receive buffers ETH_RXBUFNB. - - The configured value for ETH_RX_BUF_SIZE and ETH_RXBUFNB are only provided as - example, they can be reconfigured in the application layer to fit the application - needs */ - -/* Here we configure each Ethernet driver receive buffer to fit the Max size Ethernet - packet */ -#ifndef ETH_RX_BUF_SIZE - #define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE -#endif - -/* 5 Ethernet driver receive buffers are used (in a chained linked list)*/ -#ifndef ETH_RXBUFNB - #define ETH_RXBUFNB ((uint32_t)5 /* 5 Rx buffers of size ETH_RX_BUF_SIZE */ -#endif - - - /* Ethernet driver transmit buffers are organized in a chained linked-list, when - an ethernet packet is transmitted, Tx-DMA will transfer the packet from the - driver transmit buffers memory to the TxFIFO. - - Depending on the size of the Ethernet packet to be transmitted and the size of - each ethernet driver transmit buffer, the packet to be transmitted can take - one or more ethernet driver transmit buffer. - - In below are defined the size of one ethernet driver transmit buffer ETH_TX_BUF_SIZE - and the total count of the driver transmit buffers ETH_TXBUFNB. - - The configured value for ETH_TX_BUF_SIZE and ETH_TXBUFNB are only provided as - example, they can be reconfigured in the application layer to fit the application - needs */ - -/* Here we configure each Ethernet driver transmit buffer to fit the Max size Ethernet - packet */ -#ifndef ETH_TX_BUF_SIZE - #define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE -#endif - -/* 5 ethernet driver transmit buffers are used (in a chained linked list)*/ -#ifndef ETH_TXBUFNB - #define ETH_TXBUFNB ((uint32_t)5 /* 5 Tx buffers of size ETH_TX_BUF_SIZE */ -#endif - - /** - * @} - */ - -/** @defgroup ETH_DMA_TX_Descriptor ETH DMA TX Descriptor - * @{ - */ - -/* - DMA Tx Descriptor - ----------------------------------------------------------------------------------------------- - TDES0 | OWN(31) | CTRL[30:26] | Reserved[25:24] | CTRL[23:20] | Reserved[19:17] | Status[16:0] | - ----------------------------------------------------------------------------------------------- - TDES1 | Reserved[31:29] | Buffer2 ByteCount[28:16] | Reserved[15:13] | Buffer1 ByteCount[12:0] | - ----------------------------------------------------------------------------------------------- - TDES2 | Buffer1 Address [31:0] | - ----------------------------------------------------------------------------------------------- - TDES3 | Buffer2 Address [31:0] / Next Descriptor Address [31:0] | - ----------------------------------------------------------------------------------------------- -*/ - -/** - * @brief Bit definition of TDES0 register: DMA Tx descriptor status register - */ -#define ETH_DMATXDESC_OWN ((uint32_t)0x80000000) /*!< OWN bit: descriptor is owned by DMA engine */ -#define ETH_DMATXDESC_IC ((uint32_t)0x40000000) /*!< Interrupt on Completion */ -#define ETH_DMATXDESC_LS ((uint32_t)0x20000000) /*!< Last Segment */ -#define ETH_DMATXDESC_FS ((uint32_t)0x10000000) /*!< First Segment */ -#define ETH_DMATXDESC_DC ((uint32_t)0x08000000) /*!< Disable CRC */ -#define ETH_DMATXDESC_DP ((uint32_t)0x04000000) /*!< Disable Padding */ -#define ETH_DMATXDESC_TTSE ((uint32_t)0x02000000) /*!< Transmit Time Stamp Enable */ -#define ETH_DMATXDESC_CIC ((uint32_t)0x00C00000) /*!< Checksum Insertion Control: 4 cases */ -#define ETH_DMATXDESC_CIC_BYPASS ((uint32_t)0x00000000) /*!< Do Nothing: Checksum Engine is bypassed */ -#define ETH_DMATXDESC_CIC_IPV4HEADER ((uint32_t)0x00400000) /*!< IPV4 header Checksum Insertion */ -#define ETH_DMATXDESC_CIC_TCPUDPICMP_SEGMENT ((uint32_t)0x00800000) /*!< TCP/UDP/ICMP Checksum Insertion calculated over segment only */ -#define ETH_DMATXDESC_CIC_TCPUDPICMP_FULL ((uint32_t)0x00C00000) /*!< TCP/UDP/ICMP Checksum Insertion fully calculated */ -#define ETH_DMATXDESC_TER ((uint32_t)0x00200000) /*!< Transmit End of Ring */ -#define ETH_DMATXDESC_TCH ((uint32_t)0x00100000) /*!< Second Address Chained */ -#define ETH_DMATXDESC_TTSS ((uint32_t)0x00020000) /*!< Tx Time Stamp Status */ -#define ETH_DMATXDESC_IHE ((uint32_t)0x00010000) /*!< IP Header Error */ -#define ETH_DMATXDESC_ES ((uint32_t)0x00008000) /*!< Error summary: OR of the following bits: UE || ED || EC || LCO || NC || LCA || FF || JT */ -#define ETH_DMATXDESC_JT ((uint32_t)0x00004000) /*!< Jabber Timeout */ -#define ETH_DMATXDESC_FF ((uint32_t)0x00002000) /*!< Frame Flushed: DMA/MTL flushed the frame due to SW flush */ -#define ETH_DMATXDESC_PCE ((uint32_t)0x00001000) /*!< Payload Checksum Error */ -#define ETH_DMATXDESC_LCA ((uint32_t)0x00000800) /*!< Loss of Carrier: carrier lost during transmission */ -#define ETH_DMATXDESC_NC ((uint32_t)0x00000400) /*!< No Carrier: no carrier signal from the transceiver */ -#define ETH_DMATXDESC_LCO ((uint32_t)0x00000200) /*!< Late Collision: transmission aborted due to collision */ -#define ETH_DMATXDESC_EC ((uint32_t)0x00000100) /*!< Excessive Collision: transmission aborted after 16 collisions */ -#define ETH_DMATXDESC_VF ((uint32_t)0x00000080) /*!< VLAN Frame */ -#define ETH_DMATXDESC_CC ((uint32_t)0x00000078) /*!< Collision Count */ -#define ETH_DMATXDESC_ED ((uint32_t)0x00000004) /*!< Excessive Deferral */ -#define ETH_DMATXDESC_UF ((uint32_t)0x00000002) /*!< Underflow Error: late data arrival from the memory */ -#define ETH_DMATXDESC_DB ((uint32_t)0x00000001) /*!< Deferred Bit */ - -/** - * @brief Bit definition of TDES1 register - */ -#define ETH_DMATXDESC_TBS2 ((uint32_t)0x1FFF0000) /*!< Transmit Buffer2 Size */ -#define ETH_DMATXDESC_TBS1 ((uint32_t)0x00001FFF) /*!< Transmit Buffer1 Size */ - -/** - * @brief Bit definition of TDES2 register - */ -#define ETH_DMATXDESC_B1AP ((uint32_t)0xFFFFFFFF) /*!< Buffer1 Address Pointer */ - -/** - * @brief Bit definition of TDES3 register - */ -#define ETH_DMATXDESC_B2AP ((uint32_t)0xFFFFFFFF) /*!< Buffer2 Address Pointer */ - - /*--------------------------------------------------------------------------------------------- - TDES6 | Transmit Time Stamp Low [31:0] | - ----------------------------------------------------------------------------------------------- - TDES7 | Transmit Time Stamp High [31:0] | - ----------------------------------------------------------------------------------------------*/ - -/* Bit definition of TDES6 register */ - #define ETH_DMAPTPTXDESC_TTSL ((uint32_t)0xFFFFFFFF) /* Transmit Time Stamp Low */ - -/* Bit definition of TDES7 register */ - #define ETH_DMAPTPTXDESC_TTSH ((uint32_t)0xFFFFFFFF) /* Transmit Time Stamp High */ - -/** - * @} - */ -/** @defgroup ETH_DMA_RX_Descriptor ETH DMA RX Descriptor - * @{ - */ - -/* - DMA Rx Descriptor - -------------------------------------------------------------------------------------------------------------------- - RDES0 | OWN(31) | Status [30:0] | - --------------------------------------------------------------------------------------------------------------------- - RDES1 | CTRL(31) | Reserved[30:29] | Buffer2 ByteCount[28:16] | CTRL[15:14] | Reserved(13) | Buffer1 ByteCount[12:0] | - --------------------------------------------------------------------------------------------------------------------- - RDES2 | Buffer1 Address [31:0] | - --------------------------------------------------------------------------------------------------------------------- - RDES3 | Buffer2 Address [31:0] / Next Descriptor Address [31:0] | - --------------------------------------------------------------------------------------------------------------------- -*/ - -/** - * @brief Bit definition of RDES0 register: DMA Rx descriptor status register - */ -#define ETH_DMARXDESC_OWN ((uint32_t)0x80000000) /*!< OWN bit: descriptor is owned by DMA engine */ -#define ETH_DMARXDESC_AFM ((uint32_t)0x40000000) /*!< DA Filter Fail for the rx frame */ -#define ETH_DMARXDESC_FL ((uint32_t)0x3FFF0000) /*!< Receive descriptor frame length */ -#define ETH_DMARXDESC_ES ((uint32_t)0x00008000) /*!< Error summary: OR of the following bits: DE || OE || IPC || LC || RWT || RE || CE */ -#define ETH_DMARXDESC_DE ((uint32_t)0x00004000) /*!< Descriptor error: no more descriptors for receive frame */ -#define ETH_DMARXDESC_SAF ((uint32_t)0x00002000) /*!< SA Filter Fail for the received frame */ -#define ETH_DMARXDESC_LE ((uint32_t)0x00001000) /*!< Frame size not matching with length field */ -#define ETH_DMARXDESC_OE ((uint32_t)0x00000800) /*!< Overflow Error: Frame was damaged due to buffer overflow */ -#define ETH_DMARXDESC_VLAN ((uint32_t)0x00000400) /*!< VLAN Tag: received frame is a VLAN frame */ -#define ETH_DMARXDESC_FS ((uint32_t)0x00000200) /*!< First descriptor of the frame */ -#define ETH_DMARXDESC_LS ((uint32_t)0x00000100) /*!< Last descriptor of the frame */ -#define ETH_DMARXDESC_IPV4HCE ((uint32_t)0x00000080) /*!< IPC Checksum Error: Rx Ipv4 header checksum error */ -#define ETH_DMARXDESC_LC ((uint32_t)0x00000040) /*!< Late collision occurred during reception */ -#define ETH_DMARXDESC_FT ((uint32_t)0x00000020) /*!< Frame type - Ethernet, otherwise 802.3 */ -#define ETH_DMARXDESC_RWT ((uint32_t)0x00000010) /*!< Receive Watchdog Timeout: watchdog timer expired during reception */ -#define ETH_DMARXDESC_RE ((uint32_t)0x00000008) /*!< Receive error: error reported by MII interface */ -#define ETH_DMARXDESC_DBE ((uint32_t)0x00000004) /*!< Dribble bit error: frame contains non int multiple of 8 bits */ -#define ETH_DMARXDESC_CE ((uint32_t)0x00000002) /*!< CRC error */ -#define ETH_DMARXDESC_MAMPCE ((uint32_t)0x00000001) /*!< Rx MAC Address/Payload Checksum Error: Rx MAC address matched/ Rx Payload Checksum Error */ - -/** - * @brief Bit definition of RDES1 register - */ -#define ETH_DMARXDESC_DIC ((uint32_t)0x80000000) /*!< Disable Interrupt on Completion */ -#define ETH_DMARXDESC_RBS2 ((uint32_t)0x1FFF0000) /*!< Receive Buffer2 Size */ -#define ETH_DMARXDESC_RER ((uint32_t)0x00008000) /*!< Receive End of Ring */ -#define ETH_DMARXDESC_RCH ((uint32_t)0x00004000) /*!< Second Address Chained */ -#define ETH_DMARXDESC_RBS1 ((uint32_t)0x00001FFF) /*!< Receive Buffer1 Size */ - -/** - * @brief Bit definition of RDES2 register - */ -#define ETH_DMARXDESC_B1AP ((uint32_t)0xFFFFFFFF) /*!< Buffer1 Address Pointer */ - -/** - * @brief Bit definition of RDES3 register - */ -#define ETH_DMARXDESC_B2AP ((uint32_t)0xFFFFFFFF) /*!< Buffer2 Address Pointer */ - -/*--------------------------------------------------------------------------------------------------------------------- - RDES4 | Reserved[31:15] | Extended Status [14:0] | - --------------------------------------------------------------------------------------------------------------------- - RDES5 | Reserved[31:0] | - --------------------------------------------------------------------------------------------------------------------- - RDES6 | Receive Time Stamp Low [31:0] | - --------------------------------------------------------------------------------------------------------------------- - RDES7 | Receive Time Stamp High [31:0] | - --------------------------------------------------------------------------------------------------------------------*/ - -/* Bit definition of RDES4 register */ -#define ETH_DMAPTPRXDESC_PTPV ((uint32_t)0x00002000) /* PTP Version */ -#define ETH_DMAPTPRXDESC_PTPFT ((uint32_t)0x00001000) /* PTP Frame Type */ -#define ETH_DMAPTPRXDESC_PTPMT ((uint32_t)0x00000F00) /* PTP Message Type */ - #define ETH_DMAPTPRXDESC_PTPMT_SYNC ((uint32_t)0x00000100) /* SYNC message (all clock types) */ - #define ETH_DMAPTPRXDESC_PTPMT_FOLLOWUP ((uint32_t)0x00000200) /* FollowUp message (all clock types) */ - #define ETH_DMAPTPRXDESC_PTPMT_DELAYREQ ((uint32_t)0x00000300) /* DelayReq message (all clock types) */ - #define ETH_DMAPTPRXDESC_PTPMT_DELAYRESP ((uint32_t)0x00000400) /* DelayResp message (all clock types) */ - #define ETH_DMAPTPRXDESC_PTPMT_PDELAYREQ_ANNOUNCE ((uint32_t)0x00000500) /* PdelayReq message (peer-to-peer transparent clock) or Announce message (Ordinary or Boundary clock) */ - #define ETH_DMAPTPRXDESC_PTPMT_PDELAYRESP_MANAG ((uint32_t)0x00000600) /* PdelayResp message (peer-to-peer transparent clock) or Management message (Ordinary or Boundary clock) */ - #define ETH_DMAPTPRXDESC_PTPMT_PDELAYRESPFOLLOWUP_SIGNAL ((uint32_t)0x00000700) /* PdelayRespFollowUp message (peer-to-peer transparent clock) or Signaling message (Ordinary or Boundary clock) */ -#define ETH_DMAPTPRXDESC_IPV6PR ((uint32_t)0x00000080) /* IPv6 Packet Received */ -#define ETH_DMAPTPRXDESC_IPV4PR ((uint32_t)0x00000040) /* IPv4 Packet Received */ -#define ETH_DMAPTPRXDESC_IPCB ((uint32_t)0x00000020) /* IP Checksum Bypassed */ -#define ETH_DMAPTPRXDESC_IPPE ((uint32_t)0x00000010) /* IP Payload Error */ -#define ETH_DMAPTPRXDESC_IPHE ((uint32_t)0x00000008) /* IP Header Error */ -#define ETH_DMAPTPRXDESC_IPPT ((uint32_t)0x00000007) /* IP Payload Type */ - #define ETH_DMAPTPRXDESC_IPPT_UDP ((uint32_t)0x00000001) /* UDP payload encapsulated in the IP datagram */ - #define ETH_DMAPTPRXDESC_IPPT_TCP ((uint32_t)0x00000002) /* TCP payload encapsulated in the IP datagram */ - #define ETH_DMAPTPRXDESC_IPPT_ICMP ((uint32_t)0x00000003) /* ICMP payload encapsulated in the IP datagram */ - -/* Bit definition of RDES6 register */ -#define ETH_DMAPTPRXDESC_RTSL ((uint32_t)0xFFFFFFFF) /* Receive Time Stamp Low */ - -/* Bit definition of RDES7 register */ -#define ETH_DMAPTPRXDESC_RTSH ((uint32_t)0xFFFFFFFF) /* Receive Time Stamp High */ -/** - * @} - */ - /** @defgroup ETH_AutoNegotiation ETH AutoNegotiation - * @{ - */ -#define ETH_AUTONEGOTIATION_ENABLE ((uint32_t)0x00000001) -#define ETH_AUTONEGOTIATION_DISABLE ((uint32_t)0x00000000) - -/** - * @} - */ -/** @defgroup ETH_Speed ETH Speed - * @{ - */ -#define ETH_SPEED_10M ((uint32_t)0x00000000) -#define ETH_SPEED_100M ((uint32_t)0x00004000) - -/** - * @} - */ -/** @defgroup ETH_Duplex_Mode ETH Duplex Mode - * @{ - */ -#define ETH_MODE_FULLDUPLEX ((uint32_t)0x00000800) -#define ETH_MODE_HALFDUPLEX ((uint32_t)0x00000000) -/** - * @} - */ -/** @defgroup ETH_Rx_Mode ETH Rx Mode - * @{ - */ -#define ETH_RXPOLLING_MODE ((uint32_t)0x00000000) -#define ETH_RXINTERRUPT_MODE ((uint32_t)0x00000001) -/** - * @} - */ - -/** @defgroup ETH_Checksum_Mode ETH Checksum Mode - * @{ - */ -#define ETH_CHECKSUM_BY_HARDWARE ((uint32_t)0x00000000) -#define ETH_CHECKSUM_BY_SOFTWARE ((uint32_t)0x00000001) -/** - * @} - */ - -/** @defgroup ETH_Media_Interface ETH Media Interface - * @{ - */ -#define ETH_MEDIA_INTERFACE_MII ((uint32_t)0x00000000) -#define ETH_MEDIA_INTERFACE_RMII ((uint32_t)SYSCFG_PMC_MII_RMII_SEL) -/** - * @} - */ - -/** @defgroup ETH_Watchdog ETH Watchdog - * @{ - */ -#define ETH_WATCHDOG_ENABLE ((uint32_t)0x00000000) -#define ETH_WATCHDOG_DISABLE ((uint32_t)0x00800000) -/** - * @} - */ - -/** @defgroup ETH_Jabber ETH Jabber - * @{ - */ -#define ETH_JABBER_ENABLE ((uint32_t)0x00000000) -#define ETH_JABBER_DISABLE ((uint32_t)0x00400000) -/** - * @} - */ - -/** @defgroup ETH_Inter_Frame_Gap ETH Inter Frame Gap - * @{ - */ -#define ETH_INTERFRAMEGAP_96BIT ((uint32_t)0x00000000) /*!< minimum IFG between frames during transmission is 96Bit */ -#define ETH_INTERFRAMEGAP_88BIT ((uint32_t)0x00020000) /*!< minimum IFG between frames during transmission is 88Bit */ -#define ETH_INTERFRAMEGAP_80BIT ((uint32_t)0x00040000) /*!< minimum IFG between frames during transmission is 80Bit */ -#define ETH_INTERFRAMEGAP_72BIT ((uint32_t)0x00060000) /*!< minimum IFG between frames during transmission is 72Bit */ -#define ETH_INTERFRAMEGAP_64BIT ((uint32_t)0x00080000) /*!< minimum IFG between frames during transmission is 64Bit */ -#define ETH_INTERFRAMEGAP_56BIT ((uint32_t)0x000A0000) /*!< minimum IFG between frames during transmission is 56Bit */ -#define ETH_INTERFRAMEGAP_48BIT ((uint32_t)0x000C0000) /*!< minimum IFG between frames during transmission is 48Bit */ -#define ETH_INTERFRAMEGAP_40BIT ((uint32_t)0x000E0000) /*!< minimum IFG between frames during transmission is 40Bit */ -/** - * @} - */ - -/** @defgroup ETH_Carrier_Sense ETH Carrier Sense - * @{ - */ -#define ETH_CARRIERSENCE_ENABLE ((uint32_t)0x00000000) -#define ETH_CARRIERSENCE_DISABLE ((uint32_t)0x00010000) -/** - * @} - */ - -/** @defgroup ETH_Receive_Own ETH Receive Own - * @{ - */ -#define ETH_RECEIVEOWN_ENABLE ((uint32_t)0x00000000) -#define ETH_RECEIVEOWN_DISABLE ((uint32_t)0x00002000) -/** - * @} - */ - -/** @defgroup ETH_Loop_Back_Mode ETH Loop Back Mode - * @{ - */ -#define ETH_LOOPBACKMODE_ENABLE ((uint32_t)0x00001000) -#define ETH_LOOPBACKMODE_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup ETH_Checksum_Offload ETH Checksum Offload - * @{ - */ -#define ETH_CHECKSUMOFFLAOD_ENABLE ((uint32_t)0x00000400) -#define ETH_CHECKSUMOFFLAOD_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup ETH_Retry_Transmission ETH Retry Transmission - * @{ - */ -#define ETH_RETRYTRANSMISSION_ENABLE ((uint32_t)0x00000000) -#define ETH_RETRYTRANSMISSION_DISABLE ((uint32_t)0x00000200) -/** - * @} - */ - -/** @defgroup ETH_Automatic_Pad_CRC_Strip ETH Automatic Pad CRC Strip - * @{ - */ -#define ETH_AUTOMATICPADCRCSTRIP_ENABLE ((uint32_t)0x00000080) -#define ETH_AUTOMATICPADCRCSTRIP_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup ETH_Back_Off_Limit ETH Back Off Limit - * @{ - */ -#define ETH_BACKOFFLIMIT_10 ((uint32_t)0x00000000) -#define ETH_BACKOFFLIMIT_8 ((uint32_t)0x00000020) -#define ETH_BACKOFFLIMIT_4 ((uint32_t)0x00000040) -#define ETH_BACKOFFLIMIT_1 ((uint32_t)0x00000060) -/** - * @} - */ - -/** @defgroup ETH_Deferral_Check ETH Deferral Check - * @{ - */ -#define ETH_DEFFERRALCHECK_ENABLE ((uint32_t)0x00000010) -#define ETH_DEFFERRALCHECK_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup ETH_Receive_All ETH Receive All - * @{ - */ -#define ETH_RECEIVEALL_ENABLE ((uint32_t)0x80000000) -#define ETH_RECEIVEAll_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup ETH_Source_Addr_Filter ETH Source Addr Filter - * @{ - */ -#define ETH_SOURCEADDRFILTER_NORMAL_ENABLE ((uint32_t)0x00000200) -#define ETH_SOURCEADDRFILTER_INVERSE_ENABLE ((uint32_t)0x00000300) -#define ETH_SOURCEADDRFILTER_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup ETH_Pass_Control_Frames ETH Pass Control Frames - * @{ - */ -#define ETH_PASSCONTROLFRAMES_BLOCKALL ((uint32_t)0x00000040) /*!< MAC filters all control frames from reaching the application */ -#define ETH_PASSCONTROLFRAMES_FORWARDALL ((uint32_t)0x00000080) /*!< MAC forwards all control frames to application even if they fail the Address Filter */ -#define ETH_PASSCONTROLFRAMES_FORWARDPASSEDADDRFILTER ((uint32_t)0x000000C0) /*!< MAC forwards control frames that pass the Address Filter. */ -/** - * @} - */ - -/** @defgroup ETH_Broadcast_Frames_Reception ETH Broadcast Frames Reception - * @{ - */ -#define ETH_BROADCASTFRAMESRECEPTION_ENABLE ((uint32_t)0x00000000) -#define ETH_BROADCASTFRAMESRECEPTION_DISABLE ((uint32_t)0x00000020) -/** - * @} - */ - -/** @defgroup ETH_Destination_Addr_Filter ETH Destination Addr Filter - * @{ - */ -#define ETH_DESTINATIONADDRFILTER_NORMAL ((uint32_t)0x00000000) -#define ETH_DESTINATIONADDRFILTER_INVERSE ((uint32_t)0x00000008) -/** - * @} - */ - -/** @defgroup ETH_Promiscuous_Mode ETH Promiscuous Mode - * @{ - */ -#define ETH_PROMISCUOUS_MODE_ENABLE ((uint32_t)0x00000001) -#define ETH_PROMISCUOUS_MODE_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup ETH_Multicast_Frames_Filter ETH Multicast Frames Filter - * @{ - */ -#define ETH_MULTICASTFRAMESFILTER_PERFECTHASHTABLE ((uint32_t)0x00000404) -#define ETH_MULTICASTFRAMESFILTER_HASHTABLE ((uint32_t)0x00000004) -#define ETH_MULTICASTFRAMESFILTER_PERFECT ((uint32_t)0x00000000) -#define ETH_MULTICASTFRAMESFILTER_NONE ((uint32_t)0x00000010) -/** - * @} - */ - -/** @defgroup ETH_Unicast_Frames_Filter ETH Unicast Frames Filter - * @{ - */ -#define ETH_UNICASTFRAMESFILTER_PERFECTHASHTABLE ((uint32_t)0x00000402) -#define ETH_UNICASTFRAMESFILTER_HASHTABLE ((uint32_t)0x00000002) -#define ETH_UNICASTFRAMESFILTER_PERFECT ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup ETH_Zero_Quanta_Pause ETH Zero Quanta Pause - * @{ - */ -#define ETH_ZEROQUANTAPAUSE_ENABLE ((uint32_t)0x00000000) -#define ETH_ZEROQUANTAPAUSE_DISABLE ((uint32_t)0x00000080) -/** - * @} - */ - -/** @defgroup ETH_Pause_Low_Threshold ETH Pause Low Threshold - * @{ - */ -#define ETH_PAUSELOWTHRESHOLD_MINUS4 ((uint32_t)0x00000000) /*!< Pause time minus 4 slot times */ -#define ETH_PAUSELOWTHRESHOLD_MINUS28 ((uint32_t)0x00000010) /*!< Pause time minus 28 slot times */ -#define ETH_PAUSELOWTHRESHOLD_MINUS144 ((uint32_t)0x00000020) /*!< Pause time minus 144 slot times */ -#define ETH_PAUSELOWTHRESHOLD_MINUS256 ((uint32_t)0x00000030) /*!< Pause time minus 256 slot times */ -/** - * @} - */ - -/** @defgroup ETH_Unicast_Pause_Frame_Detect ETH Unicast Pause Frame Detect - * @{ - */ -#define ETH_UNICASTPAUSEFRAMEDETECT_ENABLE ((uint32_t)0x00000008) -#define ETH_UNICASTPAUSEFRAMEDETECT_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup ETH_Receive_Flow_Control ETH Receive Flow Control - * @{ - */ -#define ETH_RECEIVEFLOWCONTROL_ENABLE ((uint32_t)0x00000004) -#define ETH_RECEIVEFLOWCONTROL_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup ETH_Transmit_Flow_Control ETH Transmit Flow Control - * @{ - */ -#define ETH_TRANSMITFLOWCONTROL_ENABLE ((uint32_t)0x00000002) -#define ETH_TRANSMITFLOWCONTROL_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup ETH_VLAN_Tag_Comparison ETH VLAN Tag Comparison - * @{ - */ -#define ETH_VLANTAGCOMPARISON_12BIT ((uint32_t)0x00010000) -#define ETH_VLANTAGCOMPARISON_16BIT ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup ETH_MAC_addresses ETH MAC addresses - * @{ - */ -#define ETH_MAC_ADDRESS0 ((uint32_t)0x00000000) -#define ETH_MAC_ADDRESS1 ((uint32_t)0x00000008) -#define ETH_MAC_ADDRESS2 ((uint32_t)0x00000010) -#define ETH_MAC_ADDRESS3 ((uint32_t)0x00000018) -/** - * @} - */ - -/** @defgroup ETH_MAC_addresses_filter_SA_DA ETH MAC addresses filter SA DA - * @{ - */ -#define ETH_MAC_ADDRESSFILTER_SA ((uint32_t)0x00000000) -#define ETH_MAC_ADDRESSFILTER_DA ((uint32_t)0x00000008) -/** - * @} - */ - -/** @defgroup ETH_MAC_addresses_filter_Mask_bytes ETH MAC addresses filter Mask bytes - * @{ - */ -#define ETH_MAC_ADDRESSMASK_BYTE6 ((uint32_t)0x20000000) /*!< Mask MAC Address high reg bits [15:8] */ -#define ETH_MAC_ADDRESSMASK_BYTE5 ((uint32_t)0x10000000) /*!< Mask MAC Address high reg bits [7:0] */ -#define ETH_MAC_ADDRESSMASK_BYTE4 ((uint32_t)0x08000000) /*!< Mask MAC Address low reg bits [31:24] */ -#define ETH_MAC_ADDRESSMASK_BYTE3 ((uint32_t)0x04000000) /*!< Mask MAC Address low reg bits [23:16] */ -#define ETH_MAC_ADDRESSMASK_BYTE2 ((uint32_t)0x02000000) /*!< Mask MAC Address low reg bits [15:8] */ -#define ETH_MAC_ADDRESSMASK_BYTE1 ((uint32_t)0x01000000) /*!< Mask MAC Address low reg bits [70] */ -/** - * @} - */ - -/** @defgroup ETH_MAC_Debug_flags ETH MAC Debug flags - * @{ - */ -#define ETH_MAC_TXFIFO_FULL ((uint32_t)0x02000000) /* Tx FIFO full */ -#define ETH_MAC_TXFIFONOT_EMPTY ((uint32_t)0x01000000) /* Tx FIFO not empty */ -#define ETH_MAC_TXFIFO_WRITE_ACTIVE ((uint32_t)0x00400000) /* Tx FIFO write active */ -#define ETH_MAC_TXFIFO_IDLE ((uint32_t)0x00000000) /* Tx FIFO read status: Idle */ -#define ETH_MAC_TXFIFO_READ ((uint32_t)0x00100000) /* Tx FIFO read status: Read (transferring data to the MAC transmitter) */ -#define ETH_MAC_TXFIFO_WAITING ((uint32_t)0x00200000) /* Tx FIFO read status: Waiting for TxStatus from MAC transmitter */ -#define ETH_MAC_TXFIFO_WRITING ((uint32_t)0x00300000) /* Tx FIFO read status: Writing the received TxStatus or flushing the TxFIFO */ -#define ETH_MAC_TRANSMISSION_PAUSE ((uint32_t)0x00080000) /* MAC transmitter in pause */ -#define ETH_MAC_TRANSMITFRAMECONTROLLER_IDLE ((uint32_t)0x00000000) /* MAC transmit frame controller: Idle */ -#define ETH_MAC_TRANSMITFRAMECONTROLLER_WAITING ((uint32_t)0x00020000) /* MAC transmit frame controller: Waiting for Status of previous frame or IFG/backoff period to be over */ -#define ETH_MAC_TRANSMITFRAMECONTROLLER_GENRATING_PCF ((uint32_t)0x00040000) /* MAC transmit frame controller: Generating and transmitting a Pause control frame (in full duplex mode) */ -#define ETH_MAC_TRANSMITFRAMECONTROLLER_TRANSFERRING ((uint32_t)0x00060000) /* MAC transmit frame controller: Transferring input frame for transmission */ -#define ETH_MAC_MII_TRANSMIT_ACTIVE ((uint32_t)0x00010000) /* MAC MII transmit engine active */ -#define ETH_MAC_RXFIFO_EMPTY ((uint32_t)0x00000000) /* Rx FIFO fill level: empty */ -#define ETH_MAC_RXFIFO_BELOW_THRESHOLD ((uint32_t)0x00000100) /* Rx FIFO fill level: fill-level below flow-control de-activate threshold */ -#define ETH_MAC_RXFIFO_ABOVE_THRESHOLD ((uint32_t)0x00000200) /* Rx FIFO fill level: fill-level above flow-control activate threshold */ -#define ETH_MAC_RXFIFO_FULL ((uint32_t)0x00000300) /* Rx FIFO fill level: full */ -#define ETH_MAC_READCONTROLLER_IDLE ((uint32_t)0x00000000) /* Rx FIFO read controller IDLE state */ -#define ETH_MAC_READCONTROLLER_READING_DATA ((uint32_t)0x00000020) /* Rx FIFO read controller Reading frame data */ -#define ETH_MAC_READCONTROLLER_READING_STATUS ((uint32_t)0x00000040) /* Rx FIFO read controller Reading frame status (or time-stamp) */ -#define ETH_MAC_READCONTROLLER_FLUSHING ((uint32_t)0x00000060) /* Rx FIFO read controller Flushing the frame data and status */ -#define ETH_MAC_RXFIFO_WRITE_ACTIVE ((uint32_t)0x00000010) /* Rx FIFO write controller active */ -#define ETH_MAC_SMALL_FIFO_NOTACTIVE ((uint32_t)0x00000000) /* MAC small FIFO read / write controllers not active */ -#define ETH_MAC_SMALL_FIFO_READ_ACTIVE ((uint32_t)0x00000002) /* MAC small FIFO read controller active */ -#define ETH_MAC_SMALL_FIFO_WRITE_ACTIVE ((uint32_t)0x00000004) /* MAC small FIFO write controller active */ -#define ETH_MAC_SMALL_FIFO_RW_ACTIVE ((uint32_t)0x00000006) /* MAC small FIFO read / write controllers active */ -#define ETH_MAC_MII_RECEIVE_PROTOCOL_ACTIVE ((uint32_t)0x00000001) /* MAC MII receive protocol engine active */ -/** - * @} - */ - -/** @defgroup ETH_Drop_TCP_IP_Checksum_Error_Frame ETH Drop TCP IP Checksum Error Frame - * @{ - */ -#define ETH_DROPTCPIPCHECKSUMERRORFRAME_ENABLE ((uint32_t)0x00000000) -#define ETH_DROPTCPIPCHECKSUMERRORFRAME_DISABLE ((uint32_t)0x04000000) -/** - * @} - */ - -/** @defgroup ETH_Receive_Store_Forward ETH Receive Store Forward - * @{ - */ -#define ETH_RECEIVESTOREFORWARD_ENABLE ((uint32_t)0x02000000) -#define ETH_RECEIVESTOREFORWARD_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup ETH_Flush_Received_Frame ETH Flush Received Frame - * @{ - */ -#define ETH_FLUSHRECEIVEDFRAME_ENABLE ((uint32_t)0x00000000) -#define ETH_FLUSHRECEIVEDFRAME_DISABLE ((uint32_t)0x01000000) -/** - * @} - */ - -/** @defgroup ETH_Transmit_Store_Forward ETH Transmit Store Forward - * @{ - */ -#define ETH_TRANSMITSTOREFORWARD_ENABLE ((uint32_t)0x00200000) -#define ETH_TRANSMITSTOREFORWARD_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup ETH_Transmit_Threshold_Control ETH Transmit Threshold Control - * @{ - */ -#define ETH_TRANSMITTHRESHOLDCONTROL_64BYTES ((uint32_t)0x00000000) /*!< threshold level of the MTL Transmit FIFO is 64 Bytes */ -#define ETH_TRANSMITTHRESHOLDCONTROL_128BYTES ((uint32_t)0x00004000) /*!< threshold level of the MTL Transmit FIFO is 128 Bytes */ -#define ETH_TRANSMITTHRESHOLDCONTROL_192BYTES ((uint32_t)0x00008000) /*!< threshold level of the MTL Transmit FIFO is 192 Bytes */ -#define ETH_TRANSMITTHRESHOLDCONTROL_256BYTES ((uint32_t)0x0000C000) /*!< threshold level of the MTL Transmit FIFO is 256 Bytes */ -#define ETH_TRANSMITTHRESHOLDCONTROL_40BYTES ((uint32_t)0x00010000) /*!< threshold level of the MTL Transmit FIFO is 40 Bytes */ -#define ETH_TRANSMITTHRESHOLDCONTROL_32BYTES ((uint32_t)0x00014000) /*!< threshold level of the MTL Transmit FIFO is 32 Bytes */ -#define ETH_TRANSMITTHRESHOLDCONTROL_24BYTES ((uint32_t)0x00018000) /*!< threshold level of the MTL Transmit FIFO is 24 Bytes */ -#define ETH_TRANSMITTHRESHOLDCONTROL_16BYTES ((uint32_t)0x0001C000) /*!< threshold level of the MTL Transmit FIFO is 16 Bytes */ -/** - * @} - */ - -/** @defgroup ETH_Forward_Error_Frames ETH Forward Error Frames - * @{ - */ -#define ETH_FORWARDERRORFRAMES_ENABLE ((uint32_t)0x00000080) -#define ETH_FORWARDERRORFRAMES_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup ETH_Forward_Undersized_Good_Frames ETH Forward Undersized Good Frames - * @{ - */ -#define ETH_FORWARDUNDERSIZEDGOODFRAMES_ENABLE ((uint32_t)0x00000040) -#define ETH_FORWARDUNDERSIZEDGOODFRAMES_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup ETH_Receive_Threshold_Control ETH Receive Threshold Control - * @{ - */ -#define ETH_RECEIVEDTHRESHOLDCONTROL_64BYTES ((uint32_t)0x00000000) /*!< threshold level of the MTL Receive FIFO is 64 Bytes */ -#define ETH_RECEIVEDTHRESHOLDCONTROL_32BYTES ((uint32_t)0x00000008) /*!< threshold level of the MTL Receive FIFO is 32 Bytes */ -#define ETH_RECEIVEDTHRESHOLDCONTROL_96BYTES ((uint32_t)0x00000010) /*!< threshold level of the MTL Receive FIFO is 96 Bytes */ -#define ETH_RECEIVEDTHRESHOLDCONTROL_128BYTES ((uint32_t)0x00000018) /*!< threshold level of the MTL Receive FIFO is 128 Bytes */ -/** - * @} - */ - -/** @defgroup ETH_Second_Frame_Operate ETH Second Frame Operate - * @{ - */ -#define ETH_SECONDFRAMEOPERARTE_ENABLE ((uint32_t)0x00000004) -#define ETH_SECONDFRAMEOPERARTE_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup ETH_Address_Aligned_Beats ETH Address Aligned Beats - * @{ - */ -#define ETH_ADDRESSALIGNEDBEATS_ENABLE ((uint32_t)0x02000000) -#define ETH_ADDRESSALIGNEDBEATS_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup ETH_Fixed_Burst ETH Fixed Burst - * @{ - */ -#define ETH_FIXEDBURST_ENABLE ((uint32_t)0x00010000) -#define ETH_FIXEDBURST_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup ETH_Rx_DMA_Burst_Length ETH Rx DMA Burst Length - * @{ - */ -#define ETH_RXDMABURSTLENGTH_1BEAT ((uint32_t)0x00020000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 1 */ -#define ETH_RXDMABURSTLENGTH_2BEAT ((uint32_t)0x00040000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 2 */ -#define ETH_RXDMABURSTLENGTH_4BEAT ((uint32_t)0x00080000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 4 */ -#define ETH_RXDMABURSTLENGTH_8BEAT ((uint32_t)0x00100000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 8 */ -#define ETH_RXDMABURSTLENGTH_16BEAT ((uint32_t)0x00200000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 16 */ -#define ETH_RXDMABURSTLENGTH_32BEAT ((uint32_t)0x00400000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 32 */ -#define ETH_RXDMABURSTLENGTH_4XPBL_4BEAT ((uint32_t)0x01020000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 4 */ -#define ETH_RXDMABURSTLENGTH_4XPBL_8BEAT ((uint32_t)0x01040000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 8 */ -#define ETH_RXDMABURSTLENGTH_4XPBL_16BEAT ((uint32_t)0x01080000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 16 */ -#define ETH_RXDMABURSTLENGTH_4XPBL_32BEAT ((uint32_t)0x01100000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 32 */ -#define ETH_RXDMABURSTLENGTH_4XPBL_64BEAT ((uint32_t)0x01200000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 64 */ -#define ETH_RXDMABURSTLENGTH_4XPBL_128BEAT ((uint32_t)0x01400000) /*!< maximum number of beats to be transferred in one RxDMA transaction is 128 */ -/** - * @} - */ - -/** @defgroup ETH_Tx_DMA_Burst_Length ETH Tx DMA Burst Length - * @{ - */ -#define ETH_TXDMABURSTLENGTH_1BEAT ((uint32_t)0x00000100) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 1 */ -#define ETH_TXDMABURSTLENGTH_2BEAT ((uint32_t)0x00000200) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 2 */ -#define ETH_TXDMABURSTLENGTH_4BEAT ((uint32_t)0x00000400) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */ -#define ETH_TXDMABURSTLENGTH_8BEAT ((uint32_t)0x00000800) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */ -#define ETH_TXDMABURSTLENGTH_16BEAT ((uint32_t)0x00001000) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */ -#define ETH_TXDMABURSTLENGTH_32BEAT ((uint32_t)0x00002000) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */ -#define ETH_TXDMABURSTLENGTH_4XPBL_4BEAT ((uint32_t)0x01000100) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 4 */ -#define ETH_TXDMABURSTLENGTH_4XPBL_8BEAT ((uint32_t)0x01000200) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 8 */ -#define ETH_TXDMABURSTLENGTH_4XPBL_16BEAT ((uint32_t)0x01000400) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 16 */ -#define ETH_TXDMABURSTLENGTH_4XPBL_32BEAT ((uint32_t)0x01000800) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 32 */ -#define ETH_TXDMABURSTLENGTH_4XPBL_64BEAT ((uint32_t)0x01001000) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 64 */ -#define ETH_TXDMABURSTLENGTH_4XPBL_128BEAT ((uint32_t)0x01002000) /*!< maximum number of beats to be transferred in one TxDMA (or both) transaction is 128 */ -/** - * @} - */ - -/** @defgroup ETH_DMA_Enhanced_descriptor_format ETH DMA Enhanced descriptor format - * @{ - */ -#define ETH_DMAENHANCEDDESCRIPTOR_ENABLE ((uint32_t)0x00000080) -#define ETH_DMAENHANCEDDESCRIPTOR_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup ETH_DMA_Arbitration ETH DMA Arbitration - * @{ - */ -#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_1_1 ((uint32_t)0x00000000) -#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_2_1 ((uint32_t)0x00004000) -#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_3_1 ((uint32_t)0x00008000) -#define ETH_DMAARBITRATION_ROUNDROBIN_RXTX_4_1 ((uint32_t)0x0000C000) -#define ETH_DMAARBITRATION_RXPRIORTX ((uint32_t)0x00000002) -/** - * @} - */ - -/** @defgroup ETH_DMA_Tx_descriptor_segment ETH DMA Tx descriptor segment - * @{ - */ -#define ETH_DMATXDESC_LASTSEGMENTS ((uint32_t)0x40000000) /*!< Last Segment */ -#define ETH_DMATXDESC_FIRSTSEGMENT ((uint32_t)0x20000000) /*!< First Segment */ -/** - * @} - */ - -/** @defgroup ETH_DMA_Tx_descriptor_Checksum_Insertion_Control ETH DMA Tx descriptor Checksum Insertion Control - * @{ - */ -#define ETH_DMATXDESC_CHECKSUMBYPASS ((uint32_t)0x00000000) /*!< Checksum engine bypass */ -#define ETH_DMATXDESC_CHECKSUMIPV4HEADER ((uint32_t)0x00400000) /*!< IPv4 header checksum insertion */ -#define ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT ((uint32_t)0x00800000) /*!< TCP/UDP/ICMP checksum insertion. Pseudo header checksum is assumed to be present */ -#define ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL ((uint32_t)0x00C00000) /*!< TCP/UDP/ICMP checksum fully in hardware including pseudo header */ -/** - * @} - */ - -/** @defgroup ETH_DMA_Rx_descriptor_buffers ETH DMA Rx descriptor buffers - * @{ - */ -#define ETH_DMARXDESC_BUFFER1 ((uint32_t)0x00000000) /*!< DMA Rx Desc Buffer1 */ -#define ETH_DMARXDESC_BUFFER2 ((uint32_t)0x00000001) /*!< DMA Rx Desc Buffer2 */ -/** - * @} - */ - -/** @defgroup ETH_PMT_Flags ETH PMT Flags - * @{ - */ -#define ETH_PMT_FLAG_WUFFRPR ((uint32_t)0x80000000) /*!< Wake-Up Frame Filter Register Pointer Reset */ -#define ETH_PMT_FLAG_WUFR ((uint32_t)0x00000040) /*!< Wake-Up Frame Received */ -#define ETH_PMT_FLAG_MPR ((uint32_t)0x00000020) /*!< Magic Packet Received */ -/** - * @} - */ - -/** @defgroup ETH_MMC_Tx_Interrupts ETH MMC Tx Interrupts - * @{ - */ -#define ETH_MMC_IT_TGF ((uint32_t)0x00200000) /*!< When Tx good frame counter reaches half the maximum value */ -#define ETH_MMC_IT_TGFMSC ((uint32_t)0x00008000) /*!< When Tx good multi col counter reaches half the maximum value */ -#define ETH_MMC_IT_TGFSC ((uint32_t)0x00004000) /*!< When Tx good single col counter reaches half the maximum value */ -/** - * @} - */ - -/** @defgroup ETH_MMC_Rx_Interrupts ETH MMC Rx Interrupts - * @{ - */ -#define ETH_MMC_IT_RGUF ((uint32_t)0x10020000) /*!< When Rx good unicast frames counter reaches half the maximum value */ -#define ETH_MMC_IT_RFAE ((uint32_t)0x10000040) /*!< When Rx alignment error counter reaches half the maximum value */ -#define ETH_MMC_IT_RFCE ((uint32_t)0x10000020) /*!< When Rx crc error counter reaches half the maximum value */ -/** - * @} - */ - -/** @defgroup ETH_MAC_Flags ETH MAC Flags - * @{ - */ -#define ETH_MAC_FLAG_TST ((uint32_t)0x00000200) /*!< Time stamp trigger flag (on MAC) */ -#define ETH_MAC_FLAG_MMCT ((uint32_t)0x00000040) /*!< MMC transmit flag */ -#define ETH_MAC_FLAG_MMCR ((uint32_t)0x00000020) /*!< MMC receive flag */ -#define ETH_MAC_FLAG_MMC ((uint32_t)0x00000010) /*!< MMC flag (on MAC) */ -#define ETH_MAC_FLAG_PMT ((uint32_t)0x00000008) /*!< PMT flag (on MAC) */ -/** - * @} - */ - -/** @defgroup ETH_DMA_Flags ETH DMA Flags - * @{ - */ -#define ETH_DMA_FLAG_TST ((uint32_t)0x20000000) /*!< Time-stamp trigger interrupt (on DMA) */ -#define ETH_DMA_FLAG_PMT ((uint32_t)0x10000000) /*!< PMT interrupt (on DMA) */ -#define ETH_DMA_FLAG_MMC ((uint32_t)0x08000000) /*!< MMC interrupt (on DMA) */ -#define ETH_DMA_FLAG_DATATRANSFERERROR ((uint32_t)0x00800000) /*!< Error bits 0-Rx DMA, 1-Tx DMA */ -#define ETH_DMA_FLAG_READWRITEERROR ((uint32_t)0x01000000) /*!< Error bits 0-write transfer, 1-read transfer */ -#define ETH_DMA_FLAG_ACCESSERROR ((uint32_t)0x02000000) /*!< Error bits 0-data buffer, 1-desc. access */ -#define ETH_DMA_FLAG_NIS ((uint32_t)0x00010000) /*!< Normal interrupt summary flag */ -#define ETH_DMA_FLAG_AIS ((uint32_t)0x00008000) /*!< Abnormal interrupt summary flag */ -#define ETH_DMA_FLAG_ER ((uint32_t)0x00004000) /*!< Early receive flag */ -#define ETH_DMA_FLAG_FBE ((uint32_t)0x00002000) /*!< Fatal bus error flag */ -#define ETH_DMA_FLAG_ET ((uint32_t)0x00000400) /*!< Early transmit flag */ -#define ETH_DMA_FLAG_RWT ((uint32_t)0x00000200) /*!< Receive watchdog timeout flag */ -#define ETH_DMA_FLAG_RPS ((uint32_t)0x00000100) /*!< Receive process stopped flag */ -#define ETH_DMA_FLAG_RBU ((uint32_t)0x00000080) /*!< Receive buffer unavailable flag */ -#define ETH_DMA_FLAG_R ((uint32_t)0x00000040) /*!< Receive flag */ -#define ETH_DMA_FLAG_TU ((uint32_t)0x00000020) /*!< Underflow flag */ -#define ETH_DMA_FLAG_RO ((uint32_t)0x00000010) /*!< Overflow flag */ -#define ETH_DMA_FLAG_TJT ((uint32_t)0x00000008) /*!< Transmit jabber timeout flag */ -#define ETH_DMA_FLAG_TBU ((uint32_t)0x00000004) /*!< Transmit buffer unavailable flag */ -#define ETH_DMA_FLAG_TPS ((uint32_t)0x00000002) /*!< Transmit process stopped flag */ -#define ETH_DMA_FLAG_T ((uint32_t)0x00000001) /*!< Transmit flag */ -/** - * @} - */ - -/** @defgroup ETH_MAC_Interrupts ETH MAC Interrupts - * @{ - */ -#define ETH_MAC_IT_TST ((uint32_t)0x00000200) /*!< Time stamp trigger interrupt (on MAC) */ -#define ETH_MAC_IT_MMCT ((uint32_t)0x00000040) /*!< MMC transmit interrupt */ -#define ETH_MAC_IT_MMCR ((uint32_t)0x00000020) /*!< MMC receive interrupt */ -#define ETH_MAC_IT_MMC ((uint32_t)0x00000010) /*!< MMC interrupt (on MAC) */ -#define ETH_MAC_IT_PMT ((uint32_t)0x00000008) /*!< PMT interrupt (on MAC) */ -/** - * @} - */ - -/** @defgroup ETH_DMA_Interrupts ETH DMA Interrupts - * @{ - */ -#define ETH_DMA_IT_TST ((uint32_t)0x20000000) /*!< Time-stamp trigger interrupt (on DMA) */ -#define ETH_DMA_IT_PMT ((uint32_t)0x10000000) /*!< PMT interrupt (on DMA) */ -#define ETH_DMA_IT_MMC ((uint32_t)0x08000000) /*!< MMC interrupt (on DMA) */ -#define ETH_DMA_IT_NIS ((uint32_t)0x00010000) /*!< Normal interrupt summary */ -#define ETH_DMA_IT_AIS ((uint32_t)0x00008000) /*!< Abnormal interrupt summary */ -#define ETH_DMA_IT_ER ((uint32_t)0x00004000) /*!< Early receive interrupt */ -#define ETH_DMA_IT_FBE ((uint32_t)0x00002000) /*!< Fatal bus error interrupt */ -#define ETH_DMA_IT_ET ((uint32_t)0x00000400) /*!< Early transmit interrupt */ -#define ETH_DMA_IT_RWT ((uint32_t)0x00000200) /*!< Receive watchdog timeout interrupt */ -#define ETH_DMA_IT_RPS ((uint32_t)0x00000100) /*!< Receive process stopped interrupt */ -#define ETH_DMA_IT_RBU ((uint32_t)0x00000080) /*!< Receive buffer unavailable interrupt */ -#define ETH_DMA_IT_R ((uint32_t)0x00000040) /*!< Receive interrupt */ -#define ETH_DMA_IT_TU ((uint32_t)0x00000020) /*!< Underflow interrupt */ -#define ETH_DMA_IT_RO ((uint32_t)0x00000010) /*!< Overflow interrupt */ -#define ETH_DMA_IT_TJT ((uint32_t)0x00000008) /*!< Transmit jabber timeout interrupt */ -#define ETH_DMA_IT_TBU ((uint32_t)0x00000004) /*!< Transmit buffer unavailable interrupt */ -#define ETH_DMA_IT_TPS ((uint32_t)0x00000002) /*!< Transmit process stopped interrupt */ -#define ETH_DMA_IT_T ((uint32_t)0x00000001) /*!< Transmit interrupt */ -/** - * @} - */ - -/** @defgroup ETH_DMA_transmit_process_state ETH DMA transmit process state - * @{ - */ -#define ETH_DMA_TRANSMITPROCESS_STOPPED ((uint32_t)0x00000000) /*!< Stopped - Reset or Stop Tx Command issued */ -#define ETH_DMA_TRANSMITPROCESS_FETCHING ((uint32_t)0x00100000) /*!< Running - fetching the Tx descriptor */ -#define ETH_DMA_TRANSMITPROCESS_WAITING ((uint32_t)0x00200000) /*!< Running - waiting for status */ -#define ETH_DMA_TRANSMITPROCESS_READING ((uint32_t)0x00300000) /*!< Running - reading the data from host memory */ -#define ETH_DMA_TRANSMITPROCESS_SUSPENDED ((uint32_t)0x00600000) /*!< Suspended - Tx Descriptor unavailable */ -#define ETH_DMA_TRANSMITPROCESS_CLOSING ((uint32_t)0x00700000) /*!< Running - closing Rx descriptor */ - -/** - * @} - */ - - -/** @defgroup ETH_DMA_receive_process_state ETH DMA receive process state - * @{ - */ -#define ETH_DMA_RECEIVEPROCESS_STOPPED ((uint32_t)0x00000000) /*!< Stopped - Reset or Stop Rx Command issued */ -#define ETH_DMA_RECEIVEPROCESS_FETCHING ((uint32_t)0x00020000) /*!< Running - fetching the Rx descriptor */ -#define ETH_DMA_RECEIVEPROCESS_WAITING ((uint32_t)0x00060000) /*!< Running - waiting for packet */ -#define ETH_DMA_RECEIVEPROCESS_SUSPENDED ((uint32_t)0x00080000) /*!< Suspended - Rx Descriptor unavailable */ -#define ETH_DMA_RECEIVEPROCESS_CLOSING ((uint32_t)0x000A0000) /*!< Running - closing descriptor */ -#define ETH_DMA_RECEIVEPROCESS_QUEUING ((uint32_t)0x000E0000) /*!< Running - queuing the receive frame into host memory */ - -/** - * @} - */ - -/** @defgroup ETH_DMA_overflow ETH DMA overflow - * @{ - */ -#define ETH_DMA_OVERFLOW_RXFIFOCOUNTER ((uint32_t)0x10000000) /*!< Overflow bit for FIFO overflow counter */ -#define ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER ((uint32_t)0x00010000) /*!< Overflow bit for missed frame counter */ -/** - * @} - */ - -/** @defgroup ETH_EXTI_LINE_WAKEUP ETH EXTI LINE WAKEUP - * @{ - */ -#define ETH_EXTI_LINE_WAKEUP ((uint32_t)0x00080000) /*!< External interrupt line 19 Connected to the ETH EXTI Line */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup ETH_Exported_Macros ETH Exported Macros - * @brief macros to handle interrupts and specific clock configurations - * @{ - */ - -/** @brief Reset ETH handle state - * @param __HANDLE__: specifies the ETH handle. - * @retval None - */ -#define __HAL_ETH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_ETH_STATE_RESET) - -/** - * @brief Checks whether the specified ETHERNET DMA Tx Desc flag is set or not. - * @param __HANDLE__: ETH Handle - * @param __FLAG__: specifies the flag of TDES0 to check. - * @retval the ETH_DMATxDescFlag (SET or RESET). - */ -#define __HAL_ETH_DMATXDESC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->TxDesc->Status & (__FLAG__) == (__FLAG__)) - -/** - * @brief Checks whether the specified ETHERNET DMA Rx Desc flag is set or not. - * @param __HANDLE__: ETH Handle - * @param __FLAG__: specifies the flag of RDES0 to check. - * @retval the ETH_DMATxDescFlag (SET or RESET). - */ -#define __HAL_ETH_DMARXDESC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->RxDesc->Status & (__FLAG__) == (__FLAG__)) - -/** - * @brief Enables the specified DMA Rx Desc receive interrupt. - * @param __HANDLE__: ETH Handle - * @retval None - */ -#define __HAL_ETH_DMARXDESC_ENABLE_IT(__HANDLE__) ((__HANDLE__)->RxDesc->ControlBufferSize &=(~(uint32_t)ETH_DMARXDESC_DIC)) - -/** - * @brief Disables the specified DMA Rx Desc receive interrupt. - * @param __HANDLE__: ETH Handle - * @retval None - */ -#define __HAL_ETH_DMARXDESC_DISABLE_IT(__HANDLE__) ((__HANDLE__)->RxDesc->ControlBufferSize |= ETH_DMARXDESC_DIC) - -/** - * @brief Set the specified DMA Rx Desc Own bit. - * @param __HANDLE__: ETH Handle - * @retval None - */ -#define __HAL_ETH_DMARXDESC_SET_OWN_BIT(__HANDLE__) ((__HANDLE__)->RxDesc->Status |= ETH_DMARXDESC_OWN) - -/** - * @brief Returns the specified ETHERNET DMA Tx Desc collision count. - * @param __HANDLE__: ETH Handle - * @retval The Transmit descriptor collision counter value. - */ -#define __HAL_ETH_DMATXDESC_GET_COLLISION_COUNT(__HANDLE__) (((__HANDLE__)->TxDesc->Status & ETH_DMATXDESC_CC) >> ETH_DMATXDESC_COLLISION_COUNTSHIFT) - -/** - * @brief Set the specified DMA Tx Desc Own bit. - * @param __HANDLE__: ETH Handle - * @retval None - */ -#define __HAL_ETH_DMATXDESC_SET_OWN_BIT(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_OWN) - -/** - * @brief Enables the specified DMA Tx Desc Transmit interrupt. - * @param __HANDLE__: ETH Handle - * @retval None - */ -#define __HAL_ETH_DMATXDESC_ENABLE_IT(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_IC) - -/** - * @brief Disables the specified DMA Tx Desc Transmit interrupt. - * @param __HANDLE__: ETH Handle - * @retval None - */ -#define __HAL_ETH_DMATXDESC_DISABLE_IT(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_IC) - -/** - * @brief Selects the specified ETHERNET DMA Tx Desc Checksum Insertion. - * @param __HANDLE__: ETH Handle - * @param __CHECKSUM__: specifies is the DMA Tx desc checksum insertion. - * This parameter can be one of the following values: - * @arg ETH_DMATXDESC_CHECKSUMBYPASS : Checksum bypass - * @arg ETH_DMATXDESC_CHECKSUMIPV4HEADER : IPv4 header checksum - * @arg ETH_DMATXDESC_CHECKSUMTCPUDPICMPSEGMENT : TCP/UDP/ICMP checksum. Pseudo header checksum is assumed to be present - * @arg ETH_DMATXDESC_CHECKSUMTCPUDPICMPFULL : TCP/UDP/ICMP checksum fully in hardware including pseudo header - * @retval None - */ -#define __HAL_ETH_DMATXDESC_CHECKSUM_INSERTION(__HANDLE__, __CHECKSUM__) ((__HANDLE__)->TxDesc->Status |= (__CHECKSUM__)) - -/** - * @brief Enables the DMA Tx Desc CRC. - * @param __HANDLE__: ETH Handle - * @retval None - */ -#define __HAL_ETH_DMATXDESC_CRC_ENABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DC) - -/** - * @brief Disables the DMA Tx Desc CRC. - * @param __HANDLE__: ETH Handle - * @retval None - */ -#define __HAL_ETH_DMATXDESC_CRC_DISABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DC) - -/** - * @brief Enables the DMA Tx Desc padding for frame shorter than 64 bytes. - * @param __HANDLE__: ETH Handle - * @retval None - */ -#define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_ENABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status &= ~ETH_DMATXDESC_DP) - -/** - * @brief Disables the DMA Tx Desc padding for frame shorter than 64 bytes. - * @param __HANDLE__: ETH Handle - * @retval None - */ -#define __HAL_ETH_DMATXDESC_SHORT_FRAME_PADDING_DISABLE(__HANDLE__) ((__HANDLE__)->TxDesc->Status |= ETH_DMATXDESC_DP) - -/** - * @brief Enables the specified ETHERNET MAC interrupts. - * @param __HANDLE__ : ETH Handle - * @param __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be - * enabled or disabled. - * This parameter can be any combination of the following values: - * @arg ETH_MAC_IT_TST : Time stamp trigger interrupt - * @arg ETH_MAC_IT_PMT : PMT interrupt - * @retval None - */ -#define __HAL_ETH_MAC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MACIMR |= (__INTERRUPT__)) - -/** - * @brief Disables the specified ETHERNET MAC interrupts. - * @param __HANDLE__ : ETH Handle - * @param __INTERRUPT__: specifies the ETHERNET MAC interrupt sources to be - * enabled or disabled. - * This parameter can be any combination of the following values: - * @arg ETH_MAC_IT_TST : Time stamp trigger interrupt - * @arg ETH_MAC_IT_PMT : PMT interrupt - * @retval None - */ -#define __HAL_ETH_MAC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MACIMR &= ~(__INTERRUPT__)) - -/** - * @brief Initiate a Pause Control Frame (Full-duplex only). - * @param __HANDLE__: ETH Handle - * @retval None - */ -#define __HAL_ETH_INITIATE_PAUSE_CONTROL_FRAME(__HANDLE__) ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA) - -/** - * @brief Checks whether the ETHERNET flow control busy bit is set or not. - * @param __HANDLE__: ETH Handle - * @retval The new state of flow control busy status bit (SET or RESET). - */ -#define __HAL_ETH_GET_FLOW_CONTROL_BUSY_STATUS(__HANDLE__) (((__HANDLE__)->Instance->MACFCR & ETH_MACFCR_FCBBPA) == ETH_MACFCR_FCBBPA) - -/** - * @brief Enables the MAC Back Pressure operation activation (Half-duplex only). - * @param __HANDLE__: ETH Handle - * @retval None - */ -#define __HAL_ETH_BACK_PRESSURE_ACTIVATION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACFCR |= ETH_MACFCR_FCBBPA) - -/** - * @brief Disables the MAC BackPressure operation activation (Half-duplex only). - * @param __HANDLE__: ETH Handle - * @retval None - */ -#define __HAL_ETH_BACK_PRESSURE_ACTIVATION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACFCR &= ~ETH_MACFCR_FCBBPA) - -/** - * @brief Checks whether the specified ETHERNET MAC flag is set or not. - * @param __HANDLE__: ETH Handle - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg ETH_MAC_FLAG_TST : Time stamp trigger flag - * @arg ETH_MAC_FLAG_MMCT : MMC transmit flag - * @arg ETH_MAC_FLAG_MMCR : MMC receive flag - * @arg ETH_MAC_FLAG_MMC : MMC flag - * @arg ETH_MAC_FLAG_PMT : PMT flag - * @retval The state of ETHERNET MAC flag. - */ -#define __HAL_ETH_MAC_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->MACSR &( __FLAG__)) == ( __FLAG__)) - -/** - * @brief Enables the specified ETHERNET DMA interrupts. - * @param __HANDLE__ : ETH Handle - * @param __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be - * enabled @ref ETH_DMA_Interrupts - * @retval None - */ -#define __HAL_ETH_DMA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMAIER |= (__INTERRUPT__)) - -/** - * @brief Disables the specified ETHERNET DMA interrupts. - * @param __HANDLE__ : ETH Handle - * @param __INTERRUPT__: specifies the ETHERNET DMA interrupt sources to be - * disabled. @ref ETH_DMA_Interrupts - * @retval None - */ -#define __HAL_ETH_DMA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMAIER &= ~(__INTERRUPT__)) - -/** - * @brief Clears the ETHERNET DMA IT pending bit. - * @param __HANDLE__ : ETH Handle - * @param __INTERRUPT__: specifies the interrupt pending bit to clear. @ref ETH_DMA_Interrupts - * @retval None - */ -#define __HAL_ETH_DMA_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DMASR =(__INTERRUPT__)) - -/** - * @brief Checks whether the specified ETHERNET DMA flag is set or not. -* @param __HANDLE__: ETH Handle - * @param __FLAG__: specifies the flag to check. @ref ETH_DMA_Flags - * @retval The new state of ETH_DMA_FLAG (SET or RESET). - */ -#define __HAL_ETH_DMA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->DMASR &( __FLAG__)) == ( __FLAG__)) - -/** - * @brief Checks whether the specified ETHERNET DMA flag is set or not. - * @param __HANDLE__: ETH Handle - * @param __FLAG__: specifies the flag to clear. @ref ETH_DMA_Flags - * @retval The new state of ETH_DMA_FLAG (SET or RESET). - */ -#define __HAL_ETH_DMA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->DMASR = (__FLAG__)) - -/** - * @brief Checks whether the specified ETHERNET DMA overflow flag is set or not. - * @param __HANDLE__: ETH Handle - * @param __OVERFLOW__: specifies the DMA overflow flag to check. - * This parameter can be one of the following values: - * @arg ETH_DMA_OVERFLOW_RXFIFOCOUNTER : Overflow for FIFO Overflows Counter - * @arg ETH_DMA_OVERFLOW_MISSEDFRAMECOUNTER : Overflow for Buffer Unavailable Missed Frame Counter - * @retval The state of ETHERNET DMA overflow Flag (SET or RESET). - */ -#define __HAL_ETH_GET_DMA_OVERFLOW_STATUS(__HANDLE__, __OVERFLOW__) (((__HANDLE__)->Instance->DMAMFBOCR & (__OVERFLOW__)) == (__OVERFLOW__)) - -/** - * @brief Set the DMA Receive status watchdog timer register value - * @param __HANDLE__: ETH Handle - * @param __VALUE__: DMA Receive status watchdog timer register value - * @retval None - */ -#define __HAL_ETH_SET_RECEIVE_WATCHDOG_TIMER(__HANDLE__, __VALUE__) ((__HANDLE__)->Instance->DMARSWTR = (__VALUE__)) - -/** - * @brief Enables any unicast packet filtered by the MAC address - * recognition to be a wake-up frame. - * @param __HANDLE__: ETH Handle. - * @retval None - */ -#define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_GU) - -/** - * @brief Disables any unicast packet filtered by the MAC address - * recognition to be a wake-up frame. - * @param __HANDLE__: ETH Handle. - * @retval None - */ -#define __HAL_ETH_GLOBAL_UNICAST_WAKEUP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_GU) - -/** - * @brief Enables the MAC Wake-Up Frame Detection. - * @param __HANDLE__: ETH Handle. - * @retval None - */ -#define __HAL_ETH_WAKEUP_FRAME_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_WFE) - -/** - * @brief Disables the MAC Wake-Up Frame Detection. - * @param __HANDLE__: ETH Handle. - * @retval None - */ -#define __HAL_ETH_WAKEUP_FRAME_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE) - -/** - * @brief Enables the MAC Magic Packet Detection. - * @param __HANDLE__: ETH Handle. - * @retval None - */ -#define __HAL_ETH_MAGIC_PACKET_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_MPE) - -/** - * @brief Disables the MAC Magic Packet Detection. - * @param __HANDLE__: ETH Handle. - * @retval None - */ -#define __HAL_ETH_MAGIC_PACKET_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_WFE) - -/** - * @brief Enables the MAC Power Down. - * @param __HANDLE__: ETH Handle - * @retval None - */ -#define __HAL_ETH_POWER_DOWN_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR |= ETH_MACPMTCSR_PD) - -/** - * @brief Disables the MAC Power Down. - * @param __HANDLE__: ETH Handle - * @retval None - */ -#define __HAL_ETH_POWER_DOWN_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MACPMTCSR &= ~ETH_MACPMTCSR_PD) - -/** - * @brief Checks whether the specified ETHERNET PMT flag is set or not. - * @param __HANDLE__: ETH Handle. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg ETH_PMT_FLAG_WUFFRPR : Wake-Up Frame Filter Register Pointer Reset - * @arg ETH_PMT_FLAG_WUFR : Wake-Up Frame Received - * @arg ETH_PMT_FLAG_MPR : Magic Packet Received - * @retval The new state of ETHERNET PMT Flag (SET or RESET). - */ -#define __HAL_ETH_GET_PMT_FLAG_STATUS(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->MACPMTCSR &( __FLAG__)) == ( __FLAG__)) - -/** - * @brief Preset and Initialize the MMC counters to almost-full value: 0xFFFF_FFF0 (full - 16) - * @param __HANDLE__: ETH Handle. - * @retval None - */ -#define __HAL_ETH_MMC_COUNTER_FULL_PRESET(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= (ETH_MMCCR_MCFHP | ETH_MMCCR_MCP)) - -/** - * @brief Preset and Initialize the MMC counters to almost-half value: 0x7FFF_FFF0 (half - 16) - * @param __HANDLE__: ETH Handle. - * @retval None - */ -#define __HAL_ETH_MMC_COUNTER_HALF_PRESET(__HANDLE__) do{(__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCFHP;\ - (__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCP;} while (0) - -/** - * @brief Enables the MMC Counter Freeze. - * @param __HANDLE__: ETH Handle. - * @retval None - */ -#define __HAL_ETH_MMC_COUNTER_FREEZE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_MCF) - -/** - * @brief Disables the MMC Counter Freeze. - * @param __HANDLE__: ETH Handle. - * @retval None - */ -#define __HAL_ETH_MMC_COUNTER_FREEZE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_MCF) - -/** - * @brief Enables the MMC Reset On Read. - * @param __HANDLE__: ETH Handle. - * @retval None - */ -#define __HAL_ETH_ETH_MMC_RESET_ONREAD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_ROR) - -/** - * @brief Disables the MMC Reset On Read. - * @param __HANDLE__: ETH Handle. - * @retval None - */ -#define __HAL_ETH_ETH_MMC_RESET_ONREAD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_ROR) - -/** - * @brief Enables the MMC Counter Stop Rollover. - * @param __HANDLE__: ETH Handle. - * @retval None - */ -#define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR &= ~ETH_MMCCR_CSR) - -/** - * @brief Disables the MMC Counter Stop Rollover. - * @param __HANDLE__: ETH Handle. - * @retval None - */ -#define __HAL_ETH_ETH_MMC_COUNTER_ROLLOVER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CSR) - -/** - * @brief Resets the MMC Counters. - * @param __HANDLE__: ETH Handle. - * @retval None - */ -#define __HAL_ETH_MMC_COUNTERS_RESET(__HANDLE__) ((__HANDLE__)->Instance->MMCCR |= ETH_MMCCR_CR) - -/** - * @brief Enables the specified ETHERNET MMC Rx interrupts. - * @param __HANDLE__: ETH Handle. - * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled. - * This parameter can be one of the following values: - * @arg ETH_MMC_IT_RGUF : When Rx good unicast frames counter reaches half the maximum value - * @arg ETH_MMC_IT_RFAE : When Rx alignment error counter reaches half the maximum value - * @arg ETH_MMC_IT_RFCE : When Rx crc error counter reaches half the maximum value - * @retval None - */ -#define __HAL_ETH_MMC_RX_IT_ENABLE(__HANDLE__, __INTERRUPT__) (__HANDLE__)->Instance->MMCRIMR &= ~((__INTERRUPT__) & 0xEFFFFFFF) -/** - * @brief Disables the specified ETHERNET MMC Rx interrupts. - * @param __HANDLE__: ETH Handle. - * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled. - * This parameter can be one of the following values: - * @arg ETH_MMC_IT_RGUF : When Rx good unicast frames counter reaches half the maximum value - * @arg ETH_MMC_IT_RFAE : When Rx alignment error counter reaches half the maximum value - * @arg ETH_MMC_IT_RFCE : When Rx crc error counter reaches half the maximum value - * @retval None - */ -#define __HAL_ETH_MMC_RX_IT_DISABLE(__HANDLE__, __INTERRUPT__) (__HANDLE__)->Instance->MMCRIMR |= ((__INTERRUPT__) & 0xEFFFFFFF) -/** - * @brief Enables the specified ETHERNET MMC Tx interrupts. - * @param __HANDLE__: ETH Handle. - * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled. - * This parameter can be one of the following values: - * @arg ETH_MMC_IT_TGF : When Tx good frame counter reaches half the maximum value - * @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value - * @arg ETH_MMC_IT_TGFSC : When Tx good single col counter reaches half the maximum value - * @retval None - */ -#define __HAL_ETH_MMC_TX_IT_ENABLE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MMCRIMR &= ~ (__INTERRUPT__)) - -/** - * @brief Disables the specified ETHERNET MMC Tx interrupts. - * @param __HANDLE__: ETH Handle. - * @param __INTERRUPT__: specifies the ETHERNET MMC interrupt sources to be enabled or disabled. - * This parameter can be one of the following values: - * @arg ETH_MMC_IT_TGF : When Tx good frame counter reaches half the maximum value - * @arg ETH_MMC_IT_TGFMSC: When Tx good multi col counter reaches half the maximum value - * @arg ETH_MMC_IT_TGFSC : When Tx good single col counter reaches half the maximum value - * @retval None - */ -#define __HAL_ETH_MMC_TX_IT_DISABLE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->MMCRIMR |= (__INTERRUPT__)) - -/** - * @brief Enables the ETH External interrupt line. - * @retval None - */ -#define __HAL_ETH_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= (ETH_EXTI_LINE_WAKEUP) - -/** - * @brief Disables the ETH External interrupt line. - * @retval None - */ -#define __HAL_ETH_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(ETH_EXTI_LINE_WAKEUP) - -/** - * @brief Enable event on ETH External event line. - * @retval None. - */ -#define __HAL_ETH_WAKEUP_EXTI_ENABLE_EVENT() EXTI->EMR |= (ETH_EXTI_LINE_WAKEUP) - -/** - * @brief Disable event on ETH External event line - * @retval None. - */ -#define __HAL_ETH_WAKEUP_EXTI_DISABLE_EVENT() EXTI->EMR &= ~(ETH_EXTI_LINE_WAKEUP) - -/** - * @brief Get flag of the ETH External interrupt line. - * @retval None - */ -#define __HAL_ETH_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (ETH_EXTI_LINE_WAKEUP) - -/** - * @brief Clear flag of the ETH External interrupt line. - * @retval None - */ -#define __HAL_ETH_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = (ETH_EXTI_LINE_WAKEUP) - -/** - * @brief Enables rising edge trigger to the ETH External interrupt line. - * @retval None - */ -#define __HAL_ETH_WAKEUP_EXTI_ENABLE_RISING_EDGE_TRIGGER() EXTI->RTSR |= ETH_EXTI_LINE_WAKEUP - -/** - * @brief Disables the rising edge trigger to the ETH External interrupt line. - * @retval None - */ -#define __HAL_ETH_WAKEUP_EXTI_DISABLE_RISING_EDGE_TRIGGER() EXTI->RTSR &= ~(ETH_EXTI_LINE_WAKEUP) - -/** - * @brief Enables falling edge trigger to the ETH External interrupt line. - * @retval None - */ -#define __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLING_EDGE_TRIGGER() EXTI->FTSR |= (ETH_EXTI_LINE_WAKEUP) - -/** - * @brief Disables falling edge trigger to the ETH External interrupt line. - * @retval None - */ -#define __HAL_ETH_WAKEUP_EXTI_DISABLE_FALLING_EDGE_TRIGGER() EXTI->FTSR &= ~(ETH_EXTI_LINE_WAKEUP) - -/** - * @brief Enables rising/falling edge trigger to the ETH External interrupt line. - * @retval None - */ -#define __HAL_ETH_WAKEUP_EXTI_ENABLE_FALLINGRISING_TRIGGER() EXTI->RTSR |= ETH_EXTI_LINE_WAKEUP;\ - EXTI->FTSR |= ETH_EXTI_LINE_WAKEUP - -/** - * @brief Disables rising/falling edge trigger to the ETH External interrupt line. - * @retval None - */ -#define __HAL_ETH_WAKEUP_EXTI_DISABLE_FALLINGRISING_TRIGGER() EXTI->RTSR &= ~(ETH_EXTI_LINE_WAKEUP);\ - EXTI->FTSR &= ~(ETH_EXTI_LINE_WAKEUP) - -/** - * @brief Generate a Software interrupt on selected EXTI line. - * @retval None. - */ -#define __HAL_ETH_WAKEUP_EXTI_GENERATE_SWIT() EXTI->SWIER|= ETH_EXTI_LINE_WAKEUP - -/** - * @} - */ -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup ETH_Exported_Functions - * @{ - */ - -/* Initialization and de-initialization functions ****************************/ - -/** @addtogroup ETH_Exported_Functions_Group1 - * @{ - */ -HAL_StatusTypeDef HAL_ETH_Init(ETH_HandleTypeDef *heth); -HAL_StatusTypeDef HAL_ETH_DeInit(ETH_HandleTypeDef *heth); -void HAL_ETH_MspInit(ETH_HandleTypeDef *heth); -void HAL_ETH_MspDeInit(ETH_HandleTypeDef *heth); -HAL_StatusTypeDef HAL_ETH_DMATxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMATxDescTab, uint8_t* TxBuff, uint32_t TxBuffCount); -HAL_StatusTypeDef HAL_ETH_DMARxDescListInit(ETH_HandleTypeDef *heth, ETH_DMADescTypeDef *DMARxDescTab, uint8_t *RxBuff, uint32_t RxBuffCount); - -/** - * @} - */ -/* IO operation functions ****************************************************/ - -/** @addtogroup ETH_Exported_Functions_Group2 - * @{ - */ -HAL_StatusTypeDef HAL_ETH_TransmitFrame(ETH_HandleTypeDef *heth, uint32_t FrameLength); -HAL_StatusTypeDef HAL_ETH_GetReceivedFrame(ETH_HandleTypeDef *heth); -/* Communication with PHY functions*/ -HAL_StatusTypeDef HAL_ETH_ReadPHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t *RegValue); -HAL_StatusTypeDef HAL_ETH_WritePHYRegister(ETH_HandleTypeDef *heth, uint16_t PHYReg, uint32_t RegValue); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_ETH_GetReceivedFrame_IT(ETH_HandleTypeDef *heth); -void HAL_ETH_IRQHandler(ETH_HandleTypeDef *heth); -/* Callback in non blocking modes (Interrupt) */ -void HAL_ETH_TxCpltCallback(ETH_HandleTypeDef *heth); -void HAL_ETH_RxCpltCallback(ETH_HandleTypeDef *heth); -void HAL_ETH_ErrorCallback(ETH_HandleTypeDef *heth); -/** - * @} - */ - -/* Peripheral Control functions **********************************************/ - -/** @addtogroup ETH_Exported_Functions_Group3 - * @{ - */ - -HAL_StatusTypeDef HAL_ETH_Start(ETH_HandleTypeDef *heth); -HAL_StatusTypeDef HAL_ETH_Stop(ETH_HandleTypeDef *heth); -HAL_StatusTypeDef HAL_ETH_ConfigMAC(ETH_HandleTypeDef *heth, ETH_MACInitTypeDef *macconf); -HAL_StatusTypeDef HAL_ETH_ConfigDMA(ETH_HandleTypeDef *heth, ETH_DMAInitTypeDef *dmaconf); -/** - * @} - */ - -/* Peripheral State functions ************************************************/ - -/** @addtogroup ETH_Exported_Functions_Group4 - * @{ - */ -HAL_ETH_StateTypeDef HAL_ETH_GetState(ETH_HandleTypeDef *heth); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_ETH_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h deleted file mode 100644 index b71d877..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash.h +++ /dev/null @@ -1,442 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_flash.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of FLASH HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_FLASH_H -#define __STM32F4xx_HAL_FLASH_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FLASH - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Types FLASH Exported Types - * @{ - */ - -/** - * @brief FLASH Procedure structure definition - */ -typedef enum -{ - FLASH_PROC_NONE = 0, - FLASH_PROC_SECTERASE, - FLASH_PROC_MASSERASE, - FLASH_PROC_PROGRAM -} FLASH_ProcedureTypeDef; - -/** - * @brief FLASH handle Structure definition - */ -typedef struct -{ - __IO FLASH_ProcedureTypeDef ProcedureOnGoing; /*Internal variable to indicate which procedure is ongoing or not in IT context*/ - - __IO uint32_t NbSectorsToErase; /*Internal variable to save the remaining sectors to erase in IT context*/ - - __IO uint8_t VoltageForErase; /*Internal variable to provide voltage range selected by user in IT context*/ - - __IO uint32_t Sector; /*Internal variable to define the current sector which is erasing*/ - - __IO uint32_t Bank; /*Internal variable to save current bank selected during mass erase*/ - - __IO uint32_t Address; /*Internal variable to save address selected for program*/ - - HAL_LockTypeDef Lock; /* FLASH locking object */ - - __IO uint32_t ErrorCode; /* FLASH error code */ - -}FLASH_ProcessTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Constants FLASH Exported Constants - * @{ - */ -/** @defgroup FLASH_Error_Code FLASH Error Code - * @brief FLASH Error Code - * @{ - */ -#define HAL_FLASH_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ -#define HAL_FLASH_ERROR_RD ((uint32_t)0x00000001) /*!< Read Protection error */ -#define HAL_FLASH_ERROR_PGS ((uint32_t)0x00000002) /*!< Programming Sequence error */ -#define HAL_FLASH_ERROR_PGP ((uint32_t)0x00000004) /*!< Programming Parallelism error */ -#define HAL_FLASH_ERROR_PGA ((uint32_t)0x00000008) /*!< Programming Alignment error */ -#define HAL_FLASH_ERROR_WRP ((uint32_t)0x00000010) /*!< Write protection error */ -#define HAL_FLASH_ERROR_OPERATION ((uint32_t)0x00000020) /*!< Operation Error */ -/** - * @} - */ - -/** @defgroup FLASH_Type_Program FLASH Type Program - * @{ - */ -#define FLASH_TYPEPROGRAM_BYTE ((uint32_t)0x00) /*!< Program byte (8-bit) at a specified address */ -#define FLASH_TYPEPROGRAM_HALFWORD ((uint32_t)0x01) /*!< Program a half-word (16-bit) at a specified address */ -#define FLASH_TYPEPROGRAM_WORD ((uint32_t)0x02) /*!< Program a word (32-bit) at a specified address */ -#define FLASH_TYPEPROGRAM_DOUBLEWORD ((uint32_t)0x03) /*!< Program a double word (64-bit) at a specified address */ -/** - * @} - */ - -/** @defgroup FLASH_Flag_definition FLASH Flag definition - * @brief Flag definition - * @{ - */ -#define FLASH_FLAG_EOP FLASH_SR_EOP /*!< FLASH End of Operation flag */ -#define FLASH_FLAG_OPERR FLASH_SR_SOP /*!< FLASH operation Error flag */ -#define FLASH_FLAG_WRPERR FLASH_SR_WRPERR /*!< FLASH Write protected error flag */ -#define FLASH_FLAG_PGAERR FLASH_SR_PGAERR /*!< FLASH Programming Alignment error flag */ -#define FLASH_FLAG_PGPERR FLASH_SR_PGPERR /*!< FLASH Programming Parallelism error flag */ -#define FLASH_FLAG_PGSERR FLASH_SR_PGSERR /*!< FLASH Programming Sequence error flag */ -#define FLASH_FLAG_RDERR ((uint32_t)0x00000100) /*!< Read Protection error flag (PCROP) */ -#define FLASH_FLAG_BSY FLASH_SR_BSY /*!< FLASH Busy flag */ -/** - * @} - */ - -/** @defgroup FLASH_Interrupt_definition FLASH Interrupt definition - * @brief FLASH Interrupt definition - * @{ - */ -#define FLASH_IT_EOP FLASH_CR_EOPIE /*!< End of FLASH Operation Interrupt source */ -#define FLASH_IT_ERR ((uint32_t)0x02000000) /*!< Error Interrupt source */ -/** - * @} - */ - -/** @defgroup FLASH_Program_Parallelism FLASH Program Parallelism - * @{ - */ -#define FLASH_PSIZE_BYTE ((uint32_t)0x00000000) -#define FLASH_PSIZE_HALF_WORD ((uint32_t)0x00000100) -#define FLASH_PSIZE_WORD ((uint32_t)0x00000200) -#define FLASH_PSIZE_DOUBLE_WORD ((uint32_t)0x00000300) -#define CR_PSIZE_MASK ((uint32_t)0xFFFFFCFF) -/** - * @} - */ - -/** @defgroup FLASH_Keys FLASH Keys - * @{ - */ -#define RDP_KEY ((uint16_t)0x00A5) -#define FLASH_KEY1 ((uint32_t)0x45670123) -#define FLASH_KEY2 ((uint32_t)0xCDEF89AB) -#define FLASH_OPT_KEY1 ((uint32_t)0x08192A3B) -#define FLASH_OPT_KEY2 ((uint32_t)0x4C5D6E7F) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup FLASH_Exported_Macros FLASH Exported Macros - * @{ - */ -/** - * @brief Set the FLASH Latency. - * @param __LATENCY__: FLASH Latency - * The value of this parameter depend on device used within the same series - * @retval none - */ -#define __HAL_FLASH_SET_LATENCY(__LATENCY__) (*(__IO uint8_t *)ACR_BYTE0_ADDRESS = (uint8_t)(__LATENCY__)) - -/** - * @brief Get the FLASH Latency. - * @retval FLASH Latency - * The value of this parameter depend on device used within the same series - */ -#define __HAL_FLASH_GET_LATENCY() (READ_BIT((FLASH->ACR), FLASH_ACR_LATENCY)) - -/** - * @brief Enable the FLASH prefetch buffer. - * @retval none - */ -#define __HAL_FLASH_PREFETCH_BUFFER_ENABLE() (FLASH->ACR |= FLASH_ACR_PRFTEN) - -/** - * @brief Disable the FLASH prefetch buffer. - * @retval none - */ -#define __HAL_FLASH_PREFETCH_BUFFER_DISABLE() (FLASH->ACR &= (~FLASH_ACR_PRFTEN)) - -/** - * @brief Enable the FLASH instruction cache. - * @retval none - */ -#define __HAL_FLASH_INSTRUCTION_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_ICEN) - -/** - * @brief Disable the FLASH instruction cache. - * @retval none - */ -#define __HAL_FLASH_INSTRUCTION_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_ICEN)) - -/** - * @brief Enable the FLASH data cache. - * @retval none - */ -#define __HAL_FLASH_DATA_CACHE_ENABLE() (FLASH->ACR |= FLASH_ACR_DCEN) - -/** - * @brief Disable the FLASH data cache. - * @retval none - */ -#define __HAL_FLASH_DATA_CACHE_DISABLE() (FLASH->ACR &= (~FLASH_ACR_DCEN)) - -/** - * @brief Resets the FLASH instruction Cache. - * @note This function must be used only when the Instruction Cache is disabled. - * @retval None - */ -#define __HAL_FLASH_INSTRUCTION_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_ICRST; \ - FLASH->ACR &= ~FLASH_ACR_ICRST; \ - }while(0) - -/** - * @brief Resets the FLASH data Cache. - * @note This function must be used only when the data Cache is disabled. - * @retval None - */ -#define __HAL_FLASH_DATA_CACHE_RESET() do {FLASH->ACR |= FLASH_ACR_DCRST; \ - FLASH->ACR &= ~FLASH_ACR_DCRST; \ - }while(0) -/** - * @brief Enable the specified FLASH interrupt. - * @param __INTERRUPT__ : FLASH interrupt - * This parameter can be any combination of the following values: - * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt - * @arg FLASH_IT_ERR: Error Interrupt - * @retval none - */ -#define __HAL_FLASH_ENABLE_IT(__INTERRUPT__) (FLASH->CR |= (__INTERRUPT__)) - -/** - * @brief Disable the specified FLASH interrupt. - * @param __INTERRUPT__ : FLASH interrupt - * This parameter can be any combination of the following values: - * @arg FLASH_IT_EOP: End of FLASH Operation Interrupt - * @arg FLASH_IT_ERR: Error Interrupt - * @retval none - */ -#define __HAL_FLASH_DISABLE_IT(__INTERRUPT__) (FLASH->CR &= ~(uint32_t)(__INTERRUPT__)) - -/** - * @brief Get the specified FLASH flag status. - * @param __FLAG__: specifies the FLASH flag to check. - * This parameter can be one of the following values: - * @arg FLASH_FLAG_EOP : FLASH End of Operation flag - * @arg FLASH_FLAG_OPERR : FLASH operation Error flag - * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag - * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag - * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag - * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag - * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) - * @arg FLASH_FLAG_BSY : FLASH Busy flag - * @retval The new state of __FLAG__ (SET or RESET). - */ -#define __HAL_FLASH_GET_FLAG(__FLAG__) ((FLASH->SR & (__FLAG__))) - -/** - * @brief Clear the specified FLASH flag. - * @param __FLAG__: specifies the FLASH flags to clear. - * This parameter can be any combination of the following values: - * @arg FLASH_FLAG_EOP : FLASH End of Operation flag - * @arg FLASH_FLAG_OPERR : FLASH operation Error flag - * @arg FLASH_FLAG_WRPERR: FLASH Write protected error flag - * @arg FLASH_FLAG_PGAERR: FLASH Programming Alignment error flag - * @arg FLASH_FLAG_PGPERR: FLASH Programming Parallelism error flag - * @arg FLASH_FLAG_PGSERR: FLASH Programming Sequence error flag - * @arg FLASH_FLAG_RDERR : FLASH Read Protection error flag (PCROP) - * @retval none - */ -#define __HAL_FLASH_CLEAR_FLAG(__FLAG__) (FLASH->SR = (__FLAG__)) -/** - * @} - */ - -/* Include FLASH HAL Extension module */ -#include "stm32f4xx_hal_flash_ex.h" -#include "stm32f4xx_hal_flash_ramfunc.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FLASH_Exported_Functions - * @{ - */ -/** @addtogroup FLASH_Exported_Functions_Group1 - * @{ - */ -/* Program operation functions ***********************************************/ -HAL_StatusTypeDef HAL_FLASH_Program(uint32_t TypeProgram, uint32_t Address, uint64_t Data); -HAL_StatusTypeDef HAL_FLASH_Program_IT(uint32_t TypeProgram, uint32_t Address, uint64_t Data); -/* FLASH IRQ handler method */ -void HAL_FLASH_IRQHandler(void); -/* Callbacks in non blocking modes */ -void HAL_FLASH_EndOfOperationCallback(uint32_t ReturnValue); -void HAL_FLASH_OperationErrorCallback(uint32_t ReturnValue); -/** - * @} - */ - -/** @addtogroup FLASH_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions **********************************************/ -HAL_StatusTypeDef HAL_FLASH_Unlock(void); -HAL_StatusTypeDef HAL_FLASH_Lock(void); -HAL_StatusTypeDef HAL_FLASH_OB_Unlock(void); -HAL_StatusTypeDef HAL_FLASH_OB_Lock(void); -/* Option bytes control */ -HAL_StatusTypeDef HAL_FLASH_OB_Launch(void); -/** - * @} - */ - -/** @addtogroup FLASH_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State functions ************************************************/ -uint32_t HAL_FLASH_GetError(void); -HAL_StatusTypeDef FLASH_WaitForLastOperation(uint32_t Timeout); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/** @defgroup FLASH_Private_Variables FLASH Private Variables - * @{ - */ - -/** - * @} - */ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup FLASH_Private_Constants FLASH Private Constants - * @{ - */ - -/** - * @brief ACR register byte 0 (Bits[7:0]) base address - */ -#define ACR_BYTE0_ADDRESS ((uint32_t)0x40023C00) -/** - * @brief OPTCR register byte 0 (Bits[7:0]) base address - */ -#define OPTCR_BYTE0_ADDRESS ((uint32_t)0x40023C14) -/** - * @brief OPTCR register byte 1 (Bits[15:8]) base address - */ -#define OPTCR_BYTE1_ADDRESS ((uint32_t)0x40023C15) -/** - * @brief OPTCR register byte 2 (Bits[23:16]) base address - */ -#define OPTCR_BYTE2_ADDRESS ((uint32_t)0x40023C16) -/** - * @brief OPTCR register byte 3 (Bits[31:24]) base address - */ -#define OPTCR_BYTE3_ADDRESS ((uint32_t)0x40023C17) - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup FLASH_Private_Macros FLASH Private Macros - * @{ - */ - -/** @defgroup FLASH_IS_FLASH_Definitions FLASH Private macros to check input parameters - * @{ - */ -#define IS_FLASH_TYPEPROGRAM(VALUE)(((VALUE) == FLASH_TYPEPROGRAM_BYTE) || \ - ((VALUE) == FLASH_TYPEPROGRAM_HALFWORD) || \ - ((VALUE) == FLASH_TYPEPROGRAM_WORD) || \ - ((VALUE) == FLASH_TYPEPROGRAM_DOUBLEWORD)) -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup FLASH_Private_Functions FLASH Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_FLASH_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h deleted file mode 100644 index e48e63e..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ex.h +++ /dev/null @@ -1,866 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_flash_ex.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of FLASH HAL Extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_FLASH_EX_H -#define __STM32F4xx_HAL_FLASH_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FLASHEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup FLASHEx_Exported_Types FLASH Exported Types - * @{ - */ - -/** - * @brief FLASH Erase structure definition - */ -typedef struct -{ - uint32_t TypeErase; /*!< Mass erase or sector Erase. - This parameter can be a value of @ref FLASHEx_Type_Erase */ - - uint32_t Banks; /*!< Select banks to erase when Mass erase is enabled. - This parameter must be a value of @ref FLASHEx_Banks */ - - uint32_t Sector; /*!< Initial FLASH sector to erase when Mass erase is disabled - This parameter must be a value of @ref FLASHEx_Sectors */ - - uint32_t NbSectors; /*!< Number of sectors to be erased. - This parameter must be a value between 1 and (max number of sectors - value of Initial sector)*/ - - uint32_t VoltageRange;/*!< The device voltage range which defines the erase parallelism - This parameter must be a value of @ref FLASHEx_Voltage_Range */ - -} FLASH_EraseInitTypeDef; - -/** - * @brief FLASH Option Bytes Program structure definition - */ -typedef struct -{ - uint32_t OptionType; /*!< Option byte to be configured. - This parameter can be a value of @ref FLASHEx_Option_Type */ - - uint32_t WRPState; /*!< Write protection activation or deactivation. - This parameter can be a value of @ref FLASHEx_WRP_State */ - - uint32_t WRPSector; /*!< Specifies the sector(s) to be write protected. - The value of this parameter depend on device used within the same series */ - - uint32_t Banks; /*!< Select banks for WRP activation/deactivation of all sectors. - This parameter must be a value of @ref FLASHEx_Banks */ - - uint32_t RDPLevel; /*!< Set the read protection level. - This parameter can be a value of @ref FLASHEx_Option_Bytes_Read_Protection */ - - uint32_t BORLevel; /*!< Set the BOR Level. - This parameter can be a value of @ref FLASHEx_BOR_Reset_Level */ - - uint8_t USERConfig; /*!< Program the FLASH User Option Byte: IWDG_SW / RST_STOP / RST_STDBY. */ - -} FLASH_OBProgramInitTypeDef; - -/** - * @brief FLASH Advanced Option Bytes Program structure definition - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) -typedef struct -{ - uint32_t OptionType; /*!< Option byte to be configured for extension. - This parameter can be a value of @ref FLASHEx_Advanced_Option_Type */ - - uint32_t PCROPState; /*!< PCROP activation or deactivation. - This parameter can be a value of @ref FLASHEx_PCROP_State */ - -#if defined (STM32F401xC) || defined (STM32F401xE) || defined (STM32F411xE) || defined (STM32F446xx) - uint16_t Sectors; /*!< specifies the sector(s) set for PCROP. - This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */ -#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) - uint32_t Banks; /*!< Select banks for PCROP activation/deactivation of all sectors. - This parameter must be a value of @ref FLASHEx_Banks */ - - uint16_t SectorsBank1; /*!< Specifies the sector(s) set for PCROP for Bank1. - This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */ - - uint16_t SectorsBank2; /*!< Specifies the sector(s) set for PCROP for Bank2. - This parameter can be a value of @ref FLASHEx_Option_Bytes_PC_ReadWrite_Protection */ - - uint8_t BootConfig; /*!< Specifies Option bytes for boot config. - This parameter can be a value of @ref FLASHEx_Dual_Boot */ - -#endif /*STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ -} FLASH_AdvOBProgramInitTypeDef; -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup FLASHEx_Exported_Constants FLASH Exported Constants - * @{ - */ - -/** @defgroup FLASHEx_Type_Erase FLASH Type Erase - * @{ - */ -#define FLASH_TYPEERASE_SECTORS ((uint32_t)0x00) /*!< Sectors erase only */ -#define FLASH_TYPEERASE_MASSERASE ((uint32_t)0x01) /*!< Flash Mass erase activation */ -/** - * @} - */ - -/** @defgroup FLASHEx_Voltage_Range FLASH Voltage Range - * @{ - */ -#define FLASH_VOLTAGE_RANGE_1 ((uint32_t)0x00) /*!< Device operating range: 1.8V to 2.1V */ -#define FLASH_VOLTAGE_RANGE_2 ((uint32_t)0x01) /*!< Device operating range: 2.1V to 2.7V */ -#define FLASH_VOLTAGE_RANGE_3 ((uint32_t)0x02) /*!< Device operating range: 2.7V to 3.6V */ -#define FLASH_VOLTAGE_RANGE_4 ((uint32_t)0x03) /*!< Device operating range: 2.7V to 3.6V + External Vpp */ -/** - * @} - */ - -/** @defgroup FLASHEx_WRP_State FLASH WRP State - * @{ - */ -#define OB_WRPSTATE_DISABLE ((uint32_t)0x00) /*!< Disable the write protection of the desired bank 1 sectors */ -#define OB_WRPSTATE_ENABLE ((uint32_t)0x01) /*!< Enable the write protection of the desired bank 1 sectors */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Type FLASH Option Type - * @{ - */ -#define OPTIONBYTE_WRP ((uint32_t)0x01) /*!< WRP option byte configuration */ -#define OPTIONBYTE_RDP ((uint32_t)0x02) /*!< RDP option byte configuration */ -#define OPTIONBYTE_USER ((uint32_t)0x04) /*!< USER option byte configuration */ -#define OPTIONBYTE_BOR ((uint32_t)0x08) /*!< BOR option byte configuration */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Bytes_Read_Protection FLASH Option Bytes Read Protection - * @{ - */ -#define OB_RDP_LEVEL_0 ((uint8_t)0xAA) -#define OB_RDP_LEVEL_1 ((uint8_t)0x55) -#define OB_RDP_LEVEL_2 ((uint8_t)0xCC) /*!< Warning: When enabling read protection level 2 - it s no more possible to go back to level 1 or 0 */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Bytes_IWatchdog FLASH Option Bytes IWatchdog - * @{ - */ -#define OB_IWDG_SW ((uint8_t)0x20) /*!< Software IWDG selected */ -#define OB_IWDG_HW ((uint8_t)0x00) /*!< Hardware IWDG selected */ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Bytes_nRST_STOP FLASH Option Bytes nRST_STOP - * @{ - */ -#define OB_STOP_NO_RST ((uint8_t)0x40) /*!< No reset generated when entering in STOP */ -#define OB_STOP_RST ((uint8_t)0x00) /*!< Reset generated when entering in STOP */ -/** - * @} - */ - - -/** @defgroup FLASHEx_Option_Bytes_nRST_STDBY FLASH Option Bytes nRST_STDBY - * @{ - */ -#define OB_STDBY_NO_RST ((uint8_t)0x80) /*!< No reset generated when entering in STANDBY */ -#define OB_STDBY_RST ((uint8_t)0x00) /*!< Reset generated when entering in STANDBY */ -/** - * @} - */ - -/** @defgroup FLASHEx_BOR_Reset_Level FLASH BOR Reset Level - * @{ - */ -#define OB_BOR_LEVEL3 ((uint8_t)0x00) /*!< Supply voltage ranges from 2.70 to 3.60 V */ -#define OB_BOR_LEVEL2 ((uint8_t)0x04) /*!< Supply voltage ranges from 2.40 to 2.70 V */ -#define OB_BOR_LEVEL1 ((uint8_t)0x08) /*!< Supply voltage ranges from 2.10 to 2.40 V */ -#define OB_BOR_OFF ((uint8_t)0x0C) /*!< Supply voltage ranges from 1.62 to 2.10 V */ -/** - * @} - */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) -/** @defgroup FLASHEx_PCROP_State FLASH PCROP State - * @{ - */ -#define OB_PCROP_STATE_DISABLE ((uint32_t)0x00) /*!< Disable PCROP */ -#define OB_PCROP_STATE_ENABLE ((uint32_t)0x01) /*!< Enable PCROP */ -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE */ - -/** @defgroup FLASHEx_Advanced_Option_Type FLASH Advanced Option Type - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -#define OPTIONBYTE_PCROP ((uint32_t)0x01) /*!< PCROP option byte configuration */ -#define OPTIONBYTE_BOOTCONFIG ((uint32_t)0x02) /*!< BOOTConfig option byte configuration */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) -#define OPTIONBYTE_PCROP ((uint32_t)0x01) /*!<PCROP option byte configuration */ -#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */ -/** - * @} - */ - -/** @defgroup FLASH_Latency FLASH Latency - * @{ - */ -/*------------------------------------------- STM32F42xxx/STM32F43xxx------------------------------------------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero Latency cycle */ -#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One Latency cycle */ -#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two Latency cycles */ -#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three Latency cycles */ -#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four Latency cycles */ -#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five Latency cycles */ -#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six Latency cycles */ -#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven Latency cycles */ -#define FLASH_LATENCY_8 FLASH_ACR_LATENCY_8WS /*!< FLASH Eight Latency cycles */ -#define FLASH_LATENCY_9 FLASH_ACR_LATENCY_9WS /*!< FLASH Nine Latency cycles */ -#define FLASH_LATENCY_10 FLASH_ACR_LATENCY_10WS /*!< FLASH Ten Latency cycles */ -#define FLASH_LATENCY_11 FLASH_ACR_LATENCY_11WS /*!< FLASH Eleven Latency cycles */ -#define FLASH_LATENCY_12 FLASH_ACR_LATENCY_12WS /*!< FLASH Twelve Latency cycles */ -#define FLASH_LATENCY_13 FLASH_ACR_LATENCY_13WS /*!< FLASH Thirteen Latency cycles */ -#define FLASH_LATENCY_14 FLASH_ACR_LATENCY_14WS /*!< FLASH Fourteen Latency cycles */ -#define FLASH_LATENCY_15 FLASH_ACR_LATENCY_15WS /*!< FLASH Fifteen Latency cycles */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */ -/*--------------------------------------------------------------------------------------------------------------*/ - -/*-------------------------- STM32F40xxx/STM32F41xxx/STM32F401xx/STM32F411xx -----------------------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) - -#define FLASH_LATENCY_0 FLASH_ACR_LATENCY_0WS /*!< FLASH Zero Latency cycle */ -#define FLASH_LATENCY_1 FLASH_ACR_LATENCY_1WS /*!< FLASH One Latency cycle */ -#define FLASH_LATENCY_2 FLASH_ACR_LATENCY_2WS /*!< FLASH Two Latency cycles */ -#define FLASH_LATENCY_3 FLASH_ACR_LATENCY_3WS /*!< FLASH Three Latency cycles */ -#define FLASH_LATENCY_4 FLASH_ACR_LATENCY_4WS /*!< FLASH Four Latency cycles */ -#define FLASH_LATENCY_5 FLASH_ACR_LATENCY_5WS /*!< FLASH Five Latency cycles */ -#define FLASH_LATENCY_6 FLASH_ACR_LATENCY_6WS /*!< FLASH Six Latency cycles */ -#define FLASH_LATENCY_7 FLASH_ACR_LATENCY_7WS /*!< FLASH Seven Latency cycles */ -#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F411xE || STM32F446xx */ -/*--------------------------------------------------------------------------------------------------------------*/ - -/** - * @} - */ - - -/** @defgroup FLASHEx_Banks FLASH Banks - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -#define FLASH_BANK_1 ((uint32_t)1) /*!< Bank 1 */ -#define FLASH_BANK_2 ((uint32_t)2) /*!< Bank 2 */ -#define FLASH_BANK_BOTH ((uint32_t)FLASH_BANK_1 | FLASH_BANK_2) /*!< Bank1 and Bank2 */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) -#define FLASH_BANK_1 ((uint32_t)1) /*!< Bank 1 */ -#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F411xE || STM32F446xx */ -/** - * @} - */ - -/** @defgroup FLASHEx_MassErase_bit FLASH Mass Erase bit - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -#define FLASH_MER_BIT (FLASH_CR_MER1 | FLASH_CR_MER2) /*!< 2 MER bits here to clear */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) -#define FLASH_MER_BIT (FLASH_CR_MER) /*!< only 1 MER Bit */ -#endif /* STM32F40xxx || STM32F41xxx || STM32F401xx || STM32F411xE || STM32F446xx */ -/** - * @} - */ - -/** @defgroup FLASHEx_Sectors FLASH Sectors - * @{ - */ -/*------------------------------------------ STM32F42xxx/STM32F43xxx--------------------------------------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -#define FLASH_SECTOR_0 ((uint32_t)0) /*!< Sector Number 0 */ -#define FLASH_SECTOR_1 ((uint32_t)1) /*!< Sector Number 1 */ -#define FLASH_SECTOR_2 ((uint32_t)2) /*!< Sector Number 2 */ -#define FLASH_SECTOR_3 ((uint32_t)3) /*!< Sector Number 3 */ -#define FLASH_SECTOR_4 ((uint32_t)4) /*!< Sector Number 4 */ -#define FLASH_SECTOR_5 ((uint32_t)5) /*!< Sector Number 5 */ -#define FLASH_SECTOR_6 ((uint32_t)6) /*!< Sector Number 6 */ -#define FLASH_SECTOR_7 ((uint32_t)7) /*!< Sector Number 7 */ -#define FLASH_SECTOR_8 ((uint32_t)8) /*!< Sector Number 8 */ -#define FLASH_SECTOR_9 ((uint32_t)9) /*!< Sector Number 9 */ -#define FLASH_SECTOR_10 ((uint32_t)10) /*!< Sector Number 10 */ -#define FLASH_SECTOR_11 ((uint32_t)11) /*!< Sector Number 11 */ -#define FLASH_SECTOR_12 ((uint32_t)12) /*!< Sector Number 12 */ -#define FLASH_SECTOR_13 ((uint32_t)13) /*!< Sector Number 13 */ -#define FLASH_SECTOR_14 ((uint32_t)14) /*!< Sector Number 14 */ -#define FLASH_SECTOR_15 ((uint32_t)15) /*!< Sector Number 15 */ -#define FLASH_SECTOR_16 ((uint32_t)16) /*!< Sector Number 16 */ -#define FLASH_SECTOR_17 ((uint32_t)17) /*!< Sector Number 17 */ -#define FLASH_SECTOR_18 ((uint32_t)18) /*!< Sector Number 18 */ -#define FLASH_SECTOR_19 ((uint32_t)19) /*!< Sector Number 19 */ -#define FLASH_SECTOR_20 ((uint32_t)20) /*!< Sector Number 20 */ -#define FLASH_SECTOR_21 ((uint32_t)21) /*!< Sector Number 21 */ -#define FLASH_SECTOR_22 ((uint32_t)22) /*!< Sector Number 22 */ -#define FLASH_SECTOR_23 ((uint32_t)23) /*!< Sector Number 23 */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */ -/*-----------------------------------------------------------------------------------------------------*/ - -/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) -#define FLASH_SECTOR_0 ((uint32_t)0) /*!< Sector Number 0 */ -#define FLASH_SECTOR_1 ((uint32_t)1) /*!< Sector Number 1 */ -#define FLASH_SECTOR_2 ((uint32_t)2) /*!< Sector Number 2 */ -#define FLASH_SECTOR_3 ((uint32_t)3) /*!< Sector Number 3 */ -#define FLASH_SECTOR_4 ((uint32_t)4) /*!< Sector Number 4 */ -#define FLASH_SECTOR_5 ((uint32_t)5) /*!< Sector Number 5 */ -#define FLASH_SECTOR_6 ((uint32_t)6) /*!< Sector Number 6 */ -#define FLASH_SECTOR_7 ((uint32_t)7) /*!< Sector Number 7 */ -#define FLASH_SECTOR_8 ((uint32_t)8) /*!< Sector Number 8 */ -#define FLASH_SECTOR_9 ((uint32_t)9) /*!< Sector Number 9 */ -#define FLASH_SECTOR_10 ((uint32_t)10) /*!< Sector Number 10 */ -#define FLASH_SECTOR_11 ((uint32_t)11) /*!< Sector Number 11 */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ -/*-----------------------------------------------------------------------------------------------------*/ - -/*--------------------------------------------- STM32F401xC -------------------------------------------*/ -#if defined(STM32F401xC) -#define FLASH_SECTOR_0 ((uint32_t)0) /*!< Sector Number 0 */ -#define FLASH_SECTOR_1 ((uint32_t)1) /*!< Sector Number 1 */ -#define FLASH_SECTOR_2 ((uint32_t)2) /*!< Sector Number 2 */ -#define FLASH_SECTOR_3 ((uint32_t)3) /*!< Sector Number 3 */ -#define FLASH_SECTOR_4 ((uint32_t)4) /*!< Sector Number 4 */ -#define FLASH_SECTOR_5 ((uint32_t)5) /*!< Sector Number 5 */ -#endif /* STM32F401xC */ -/*-----------------------------------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F401xE/STM32F411xE/STM32F446xx ------------------------------*/ -#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) -#define FLASH_SECTOR_0 ((uint32_t)0) /*!< Sector Number 0 */ -#define FLASH_SECTOR_1 ((uint32_t)1) /*!< Sector Number 1 */ -#define FLASH_SECTOR_2 ((uint32_t)2) /*!< Sector Number 2 */ -#define FLASH_SECTOR_3 ((uint32_t)3) /*!< Sector Number 3 */ -#define FLASH_SECTOR_4 ((uint32_t)4) /*!< Sector Number 4 */ -#define FLASH_SECTOR_5 ((uint32_t)5) /*!< Sector Number 5 */ -#define FLASH_SECTOR_6 ((uint32_t)6) /*!< Sector Number 6 */ -#define FLASH_SECTOR_7 ((uint32_t)7) /*!< Sector Number 7 */ -#endif /* STM32F401xE || STM32F411xE || STM32F446xx */ -/*-----------------------------------------------------------------------------------------------------*/ - -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Bytes_Write_Protection FLASH Option Bytes Write Protection - * @{ - */ -/*----------------------------------------- STM32F42xxx/STM32F43xxx-------------------------------------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -#define OB_WRP_SECTOR_0 ((uint32_t)0x00000001) /*!< Write protection of Sector0 */ -#define OB_WRP_SECTOR_1 ((uint32_t)0x00000002) /*!< Write protection of Sector1 */ -#define OB_WRP_SECTOR_2 ((uint32_t)0x00000004) /*!< Write protection of Sector2 */ -#define OB_WRP_SECTOR_3 ((uint32_t)0x00000008) /*!< Write protection of Sector3 */ -#define OB_WRP_SECTOR_4 ((uint32_t)0x00000010) /*!< Write protection of Sector4 */ -#define OB_WRP_SECTOR_5 ((uint32_t)0x00000020) /*!< Write protection of Sector5 */ -#define OB_WRP_SECTOR_6 ((uint32_t)0x00000040) /*!< Write protection of Sector6 */ -#define OB_WRP_SECTOR_7 ((uint32_t)0x00000080) /*!< Write protection of Sector7 */ -#define OB_WRP_SECTOR_8 ((uint32_t)0x00000100) /*!< Write protection of Sector8 */ -#define OB_WRP_SECTOR_9 ((uint32_t)0x00000200) /*!< Write protection of Sector9 */ -#define OB_WRP_SECTOR_10 ((uint32_t)0x00000400) /*!< Write protection of Sector10 */ -#define OB_WRP_SECTOR_11 ((uint32_t)0x00000800) /*!< Write protection of Sector11 */ -#define OB_WRP_SECTOR_12 ((uint32_t)0x00000001 << 12) /*!< Write protection of Sector12 */ -#define OB_WRP_SECTOR_13 ((uint32_t)0x00000002 << 12) /*!< Write protection of Sector13 */ -#define OB_WRP_SECTOR_14 ((uint32_t)0x00000004 << 12) /*!< Write protection of Sector14 */ -#define OB_WRP_SECTOR_15 ((uint32_t)0x00000008 << 12) /*!< Write protection of Sector15 */ -#define OB_WRP_SECTOR_16 ((uint32_t)0x00000010 << 12) /*!< Write protection of Sector16 */ -#define OB_WRP_SECTOR_17 ((uint32_t)0x00000020 << 12) /*!< Write protection of Sector17 */ -#define OB_WRP_SECTOR_18 ((uint32_t)0x00000040 << 12) /*!< Write protection of Sector18 */ -#define OB_WRP_SECTOR_19 ((uint32_t)0x00000080 << 12) /*!< Write protection of Sector19 */ -#define OB_WRP_SECTOR_20 ((uint32_t)0x00000100 << 12) /*!< Write protection of Sector20 */ -#define OB_WRP_SECTOR_21 ((uint32_t)0x00000200 << 12) /*!< Write protection of Sector21 */ -#define OB_WRP_SECTOR_22 ((uint32_t)0x00000400 << 12) /*!< Write protection of Sector22 */ -#define OB_WRP_SECTOR_23 ((uint32_t)0x00000800 << 12) /*!< Write protection of Sector23 */ -#define OB_WRP_SECTOR_All ((uint32_t)0x00000FFF << 12) /*!< Write protection of all Sectors */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */ -/*-----------------------------------------------------------------------------------------------------*/ - -/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) -#define OB_WRP_SECTOR_0 ((uint32_t)0x00000001) /*!< Write protection of Sector0 */ -#define OB_WRP_SECTOR_1 ((uint32_t)0x00000002) /*!< Write protection of Sector1 */ -#define OB_WRP_SECTOR_2 ((uint32_t)0x00000004) /*!< Write protection of Sector2 */ -#define OB_WRP_SECTOR_3 ((uint32_t)0x00000008) /*!< Write protection of Sector3 */ -#define OB_WRP_SECTOR_4 ((uint32_t)0x00000010) /*!< Write protection of Sector4 */ -#define OB_WRP_SECTOR_5 ((uint32_t)0x00000020) /*!< Write protection of Sector5 */ -#define OB_WRP_SECTOR_6 ((uint32_t)0x00000040) /*!< Write protection of Sector6 */ -#define OB_WRP_SECTOR_7 ((uint32_t)0x00000080) /*!< Write protection of Sector7 */ -#define OB_WRP_SECTOR_8 ((uint32_t)0x00000100) /*!< Write protection of Sector8 */ -#define OB_WRP_SECTOR_9 ((uint32_t)0x00000200) /*!< Write protection of Sector9 */ -#define OB_WRP_SECTOR_10 ((uint32_t)0x00000400) /*!< Write protection of Sector10 */ -#define OB_WRP_SECTOR_11 ((uint32_t)0x00000800) /*!< Write protection of Sector11 */ -#define OB_WRP_SECTOR_All ((uint32_t)0x00000FFF) /*!< Write protection of all Sectors */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ -/*-----------------------------------------------------------------------------------------------------*/ - -/*--------------------------------------------- STM32F401xC -------------------------------------------*/ -#if defined(STM32F401xC) -#define OB_WRP_SECTOR_0 ((uint32_t)0x00000001) /*!< Write protection of Sector0 */ -#define OB_WRP_SECTOR_1 ((uint32_t)0x00000002) /*!< Write protection of Sector1 */ -#define OB_WRP_SECTOR_2 ((uint32_t)0x00000004) /*!< Write protection of Sector2 */ -#define OB_WRP_SECTOR_3 ((uint32_t)0x00000008) /*!< Write protection of Sector3 */ -#define OB_WRP_SECTOR_4 ((uint32_t)0x00000010) /*!< Write protection of Sector4 */ -#define OB_WRP_SECTOR_5 ((uint32_t)0x00000020) /*!< Write protection of Sector5 */ -#define OB_WRP_SECTOR_All ((uint32_t)0x00000FFF) /*!< Write protection of all Sectors */ -#endif /* STM32F401xC */ -/*-----------------------------------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F401xE/STM32F411xE/STM32F446xx ------------------------------*/ -#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) -#define OB_WRP_SECTOR_0 ((uint32_t)0x00000001) /*!< Write protection of Sector0 */ -#define OB_WRP_SECTOR_1 ((uint32_t)0x00000002) /*!< Write protection of Sector1 */ -#define OB_WRP_SECTOR_2 ((uint32_t)0x00000004) /*!< Write protection of Sector2 */ -#define OB_WRP_SECTOR_3 ((uint32_t)0x00000008) /*!< Write protection of Sector3 */ -#define OB_WRP_SECTOR_4 ((uint32_t)0x00000010) /*!< Write protection of Sector4 */ -#define OB_WRP_SECTOR_5 ((uint32_t)0x00000020) /*!< Write protection of Sector5 */ -#define OB_WRP_SECTOR_6 ((uint32_t)0x00000040) /*!< Write protection of Sector6 */ -#define OB_WRP_SECTOR_7 ((uint32_t)0x00000080) /*!< Write protection of Sector7 */ -#define OB_WRP_SECTOR_All ((uint32_t)0x00000FFF) /*!< Write protection of all Sectors */ -#endif /* STM32F401xE || STM32F411xE || STM32F446xx */ -/*-----------------------------------------------------------------------------------------------------*/ -/** - * @} - */ - -/** @defgroup FLASHEx_Option_Bytes_PC_ReadWrite_Protection FLASH Option Bytes PC ReadWrite Protection - * @{ - */ -/*----------------------------------------- STM32F42xxx/STM32F43xxx-------------------------------------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector0 */ -#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector1 */ -#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector2 */ -#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector3 */ -#define OB_PCROP_SECTOR_4 ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector4 */ -#define OB_PCROP_SECTOR_5 ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector5 */ -#define OB_PCROP_SECTOR_6 ((uint32_t)0x00000040) /*!< PC Read/Write protection of Sector6 */ -#define OB_PCROP_SECTOR_7 ((uint32_t)0x00000080) /*!< PC Read/Write protection of Sector7 */ -#define OB_PCROP_SECTOR_8 ((uint32_t)0x00000100) /*!< PC Read/Write protection of Sector8 */ -#define OB_PCROP_SECTOR_9 ((uint32_t)0x00000200) /*!< PC Read/Write protection of Sector9 */ -#define OB_PCROP_SECTOR_10 ((uint32_t)0x00000400) /*!< PC Read/Write protection of Sector10 */ -#define OB_PCROP_SECTOR_11 ((uint32_t)0x00000800) /*!< PC Read/Write protection of Sector11 */ -#define OB_PCROP_SECTOR_12 ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector12 */ -#define OB_PCROP_SECTOR_13 ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector13 */ -#define OB_PCROP_SECTOR_14 ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector14 */ -#define OB_PCROP_SECTOR_15 ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector15 */ -#define OB_PCROP_SECTOR_16 ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector16 */ -#define OB_PCROP_SECTOR_17 ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector17 */ -#define OB_PCROP_SECTOR_18 ((uint32_t)0x00000040) /*!< PC Read/Write protection of Sector18 */ -#define OB_PCROP_SECTOR_19 ((uint32_t)0x00000080) /*!< PC Read/Write protection of Sector19 */ -#define OB_PCROP_SECTOR_20 ((uint32_t)0x00000100) /*!< PC Read/Write protection of Sector20 */ -#define OB_PCROP_SECTOR_21 ((uint32_t)0x00000200) /*!< PC Read/Write protection of Sector21 */ -#define OB_PCROP_SECTOR_22 ((uint32_t)0x00000400) /*!< PC Read/Write protection of Sector22 */ -#define OB_PCROP_SECTOR_23 ((uint32_t)0x00000800) /*!< PC Read/Write protection of Sector23 */ -#define OB_PCROP_SECTOR_All ((uint32_t)0x00000FFF) /*!< PC Read/Write protection of all Sectors */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */ -/*-----------------------------------------------------------------------------------------------------*/ - -/*--------------------------------------------- STM32F401xC -------------------------------------------*/ -#if defined(STM32F401xC) -#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector0 */ -#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector1 */ -#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector2 */ -#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector3 */ -#define OB_PCROP_SECTOR_4 ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector4 */ -#define OB_PCROP_SECTOR_5 ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector5 */ -#define OB_PCROP_SECTOR_All ((uint32_t)0x00000FFF) /*!< PC Read/Write protection of all Sectors */ -#endif /* STM32F401xC */ -/*-----------------------------------------------------------------------------------------------------*/ - -/*------------------------------ STM32F401xE/STM32F411xE/STM32F446xx ----------------------------------*/ -#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) -#define OB_PCROP_SECTOR_0 ((uint32_t)0x00000001) /*!< PC Read/Write protection of Sector0 */ -#define OB_PCROP_SECTOR_1 ((uint32_t)0x00000002) /*!< PC Read/Write protection of Sector1 */ -#define OB_PCROP_SECTOR_2 ((uint32_t)0x00000004) /*!< PC Read/Write protection of Sector2 */ -#define OB_PCROP_SECTOR_3 ((uint32_t)0x00000008) /*!< PC Read/Write protection of Sector3 */ -#define OB_PCROP_SECTOR_4 ((uint32_t)0x00000010) /*!< PC Read/Write protection of Sector4 */ -#define OB_PCROP_SECTOR_5 ((uint32_t)0x00000020) /*!< PC Read/Write protection of Sector5 */ -#define OB_PCROP_SECTOR_6 ((uint32_t)0x00000040) /*!< PC Read/Write protection of Sector6 */ -#define OB_PCROP_SECTOR_7 ((uint32_t)0x00000080) /*!< PC Read/Write protection of Sector7 */ -#define OB_PCROP_SECTOR_All ((uint32_t)0x00000FFF) /*!< PC Read/Write protection of all Sectors */ -#endif /* STM32F401xE || STM32F411xE || STM32F446xx */ -/*-----------------------------------------------------------------------------------------------------*/ - -/** - * @} - */ - -/** @defgroup FLASHEx_Dual_Boot FLASH Dual Boot - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -#define OB_DUAL_BOOT_ENABLE ((uint8_t)0x10) /*!< Dual Bank Boot Enable */ -#define OB_DUAL_BOOT_DISABLE ((uint8_t)0x00) /*!< Dual Bank Boot Disable, always boot on User Flash */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */ -/** - * @} - */ - -/** @defgroup FLASHEx_Selection_Protection_Mode FLASH Selection Protection Mode - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) -#define OB_PCROP_DESELECTED ((uint8_t)0x00) /*!< Disabled PcROP, nWPRi bits used for Write Protection on sector i */ -#define OB_PCROP_SELECTED ((uint8_t)0x80) /*!< Enable PcROP, nWPRi bits used for PCRoP Protection on sector i */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FLASHEx_Exported_Functions - * @{ - */ - -/** @addtogroup FLASHEx_Exported_Functions_Group1 - * @{ - */ -/* Extension Program operation functions *************************************/ -HAL_StatusTypeDef HAL_FLASHEx_Erase(FLASH_EraseInitTypeDef *pEraseInit, uint32_t *SectorError); -HAL_StatusTypeDef HAL_FLASHEx_Erase_IT(FLASH_EraseInitTypeDef *pEraseInit); -HAL_StatusTypeDef HAL_FLASHEx_OBProgram(FLASH_OBProgramInitTypeDef *pOBInit); -void HAL_FLASHEx_OBGetConfig(FLASH_OBProgramInitTypeDef *pOBInit); - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) -HAL_StatusTypeDef HAL_FLASHEx_AdvOBProgram (FLASH_AdvOBProgramInitTypeDef *pAdvOBInit); -void HAL_FLASHEx_AdvOBGetConfig(FLASH_AdvOBProgramInitTypeDef *pAdvOBInit); -HAL_StatusTypeDef HAL_FLASHEx_OB_SelectPCROP(void); -HAL_StatusTypeDef HAL_FLASHEx_OB_DeSelectPCROP(void); -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -uint16_t HAL_FLASHEx_OB_GetBank2WRP(void); -#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */ -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup FLASHEx_Private_Constants FLASH Private Constants - * @{ - */ -/*--------------------------------------- STM32F42xxx/STM32F43xxx--------------------------------------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -#define FLASH_SECTOR_TOTAL 24 -#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */ - -/*--------------------------------------- STM32F40xxx/STM32F41xxx -------------------------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) -#define FLASH_SECTOR_TOTAL 12 -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -/*--------------------------------------------- STM32F401xC -------------------------------------------*/ -#if defined(STM32F401xC) -#define FLASH_SECTOR_TOTAL 6 -#endif /* STM32F401xC */ - -/*--------------------------------- STM32F401xE/STM32F411xE/STM32F446xx -------------------------------*/ -#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) -#define FLASH_SECTOR_TOTAL 8 -#endif /* STM32F401xE || STM32F411xE || STM32F446xx */ - -/** - * @brief OPTCR1 register byte 2 (Bits[23:16]) base address - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -#define OPTCR1_BYTE2_ADDRESS ((uint32_t)0x40023C1A) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup FLASHEx_Private_Macros FLASH Private Macros - * @{ - */ - -/** @defgroup FLASHEx_IS_FLASH_Definitions FLASH Private macros to check input parameters - * @{ - */ - -#define IS_FLASH_TYPEERASE(VALUE)(((VALUE) == FLASH_TYPEERASE_SECTORS) || \ - ((VALUE) == FLASH_TYPEERASE_MASSERASE)) - -#define IS_VOLTAGERANGE(RANGE)(((RANGE) == FLASH_VOLTAGE_RANGE_1) || \ - ((RANGE) == FLASH_VOLTAGE_RANGE_2) || \ - ((RANGE) == FLASH_VOLTAGE_RANGE_3) || \ - ((RANGE) == FLASH_VOLTAGE_RANGE_4)) - -#define IS_WRPSTATE(VALUE)(((VALUE) == OB_WRPSTATE_DISABLE) || \ - ((VALUE) == OB_WRPSTATE_ENABLE)) - -#define IS_OPTIONBYTE(VALUE)(((VALUE) <= (OPTIONBYTE_WRP|OPTIONBYTE_RDP|OPTIONBYTE_USER|OPTIONBYTE_BOR))) - -#define IS_OB_RDP_LEVEL(LEVEL) (((LEVEL) == OB_RDP_LEVEL_0) ||\ - ((LEVEL) == OB_RDP_LEVEL_1) ||\ - ((LEVEL) == OB_RDP_LEVEL_2)) - -#define IS_OB_IWDG_SOURCE(SOURCE) (((SOURCE) == OB_IWDG_SW) || ((SOURCE) == OB_IWDG_HW)) - -#define IS_OB_STOP_SOURCE(SOURCE) (((SOURCE) == OB_STOP_NO_RST) || ((SOURCE) == OB_STOP_RST)) - -#define IS_OB_STDBY_SOURCE(SOURCE) (((SOURCE) == OB_STDBY_NO_RST) || ((SOURCE) == OB_STDBY_RST)) - -#define IS_OB_BOR_LEVEL(LEVEL) (((LEVEL) == OB_BOR_LEVEL1) || ((LEVEL) == OB_BOR_LEVEL2) ||\ - ((LEVEL) == OB_BOR_LEVEL3) || ((LEVEL) == OB_BOR_OFF)) - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) -#define IS_PCROPSTATE(VALUE)(((VALUE) == OB_PCROP_STATE_DISABLE) || \ - ((VALUE) == OB_PCROP_STATE_ENABLE)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -#define IS_OBEX(VALUE)(((VALUE) == OPTIONBYTE_PCROP) || \ - ((VALUE) == OPTIONBYTE_BOOTCONFIG)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) -#define IS_OBEX(VALUE)(((VALUE) == OPTIONBYTE_PCROP)) -#endif /* STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \ - ((LATENCY) == FLASH_LATENCY_1) || \ - ((LATENCY) == FLASH_LATENCY_2) || \ - ((LATENCY) == FLASH_LATENCY_3) || \ - ((LATENCY) == FLASH_LATENCY_4) || \ - ((LATENCY) == FLASH_LATENCY_5) || \ - ((LATENCY) == FLASH_LATENCY_6) || \ - ((LATENCY) == FLASH_LATENCY_7) || \ - ((LATENCY) == FLASH_LATENCY_8) || \ - ((LATENCY) == FLASH_LATENCY_9) || \ - ((LATENCY) == FLASH_LATENCY_10) || \ - ((LATENCY) == FLASH_LATENCY_11) || \ - ((LATENCY) == FLASH_LATENCY_12) || \ - ((LATENCY) == FLASH_LATENCY_13) || \ - ((LATENCY) == FLASH_LATENCY_14) || \ - ((LATENCY) == FLASH_LATENCY_15)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || \ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) -#define IS_FLASH_LATENCY(LATENCY) (((LATENCY) == FLASH_LATENCY_0) || \ - ((LATENCY) == FLASH_LATENCY_1) || \ - ((LATENCY) == FLASH_LATENCY_2) || \ - ((LATENCY) == FLASH_LATENCY_3) || \ - ((LATENCY) == FLASH_LATENCY_4) || \ - ((LATENCY) == FLASH_LATENCY_5) || \ - ((LATENCY) == FLASH_LATENCY_6) || \ - ((LATENCY) == FLASH_LATENCY_7)) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1) || \ - ((BANK) == FLASH_BANK_2) || \ - ((BANK) == FLASH_BANK_BOTH)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) -#define IS_FLASH_BANK(BANK) (((BANK) == FLASH_BANK_1)) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */ - - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -#define IS_FLASH_SECTOR(SECTOR) ( ((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\ - ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\ - ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\ - ((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7) ||\ - ((SECTOR) == FLASH_SECTOR_8) || ((SECTOR) == FLASH_SECTOR_9) ||\ - ((SECTOR) == FLASH_SECTOR_10) || ((SECTOR) == FLASH_SECTOR_11) ||\ - ((SECTOR) == FLASH_SECTOR_12) || ((SECTOR) == FLASH_SECTOR_13) ||\ - ((SECTOR) == FLASH_SECTOR_14) || ((SECTOR) == FLASH_SECTOR_15) ||\ - ((SECTOR) == FLASH_SECTOR_16) || ((SECTOR) == FLASH_SECTOR_17) ||\ - ((SECTOR) == FLASH_SECTOR_18) || ((SECTOR) == FLASH_SECTOR_19) ||\ - ((SECTOR) == FLASH_SECTOR_20) || ((SECTOR) == FLASH_SECTOR_21) ||\ - ((SECTOR) == FLASH_SECTOR_22) || ((SECTOR) == FLASH_SECTOR_23)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) -#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\ - ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\ - ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\ - ((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7) ||\ - ((SECTOR) == FLASH_SECTOR_8) || ((SECTOR) == FLASH_SECTOR_9) ||\ - ((SECTOR) == FLASH_SECTOR_10) || ((SECTOR) == FLASH_SECTOR_11)) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F401xC) -#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\ - ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\ - ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5)) -#endif /* STM32F401xC */ - -#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) -#define IS_FLASH_SECTOR(SECTOR) (((SECTOR) == FLASH_SECTOR_0) || ((SECTOR) == FLASH_SECTOR_1) ||\ - ((SECTOR) == FLASH_SECTOR_2) || ((SECTOR) == FLASH_SECTOR_3) ||\ - ((SECTOR) == FLASH_SECTOR_4) || ((SECTOR) == FLASH_SECTOR_5) ||\ - ((SECTOR) == FLASH_SECTOR_6) || ((SECTOR) == FLASH_SECTOR_7)) -#endif /* STM32F401xE || STM32F411xE || STM32F446xx */ - -#define IS_FLASH_ADDRESS(ADDRESS) (((ADDRESS) >= FLASH_BASE) && ((ADDRESS) <= FLASH_END)) -#define IS_FLASH_NBSECTORS(NBSECTORS) (((NBSECTORS) != 0) && ((NBSECTORS) <= FLASH_SECTOR_TOTAL)) - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFF000000) == 0x00000000) && ((SECTOR) != 0x00000000)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000)) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F401xC) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000)) -#endif /* STM32F401xC */ - -#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) -#define IS_OB_WRP_SECTOR(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000)) -#endif /* STM32F401xE || STM32F411xE || STM32F446xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -#define IS_OB_PCROP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */ - -#if defined(STM32F401xC) -#define IS_OB_PCROP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000)) -#endif /* STM32F401xC */ - -#if defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) -#define IS_OB_PCROP(SECTOR)((((SECTOR) & (uint32_t)0xFFFFF000) == 0x00000000) && ((SECTOR) != 0x00000000)) -#endif /* STM32F401xE || STM32F411xE || STM32F446xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -#define IS_OB_BOOT(BOOT) (((BOOT) == OB_DUAL_BOOT_ENABLE) || ((BOOT) == OB_DUAL_BOOT_DISABLE)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) -#define IS_OB_PCROP_SELECT(PCROP) (((PCROP) == OB_PCROP_SELECTED) || ((PCROP) == OB_PCROP_DESELECTED)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */ -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup FLASHEx_Private_Functions FLASH Private Functions - * @{ - */ -void FLASH_Erase_Sector(uint32_t Sector, uint8_t VoltageRange); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_FLASH_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h deleted file mode 100644 index 93023ab..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_flash_ramfunc.h +++ /dev/null @@ -1,97 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_flash_ramfunc.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of FLASH RAMFUNC driver. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_FLASH_RAMFUNC_H -#define __STM32F4xx_FLASH_RAMFUNC_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F411xE) || defined(STM32F446xx) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FLASHRAMFUNC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FLASHRAMFUNC_Exported_Functions - * @{ - */ - -/** @addtogroup FLASHRAMFUNC_Exported_Functions_Group1 - * @{ - */ -__RAM_FUNC HAL_FLASHEx_StopFlashInterfaceClk(void); -__RAM_FUNC HAL_FLASHEx_StartFlashInterfaceClk(void); -__RAM_FUNC HAL_FLASHEx_EnableFlashSleepMode(void); -__RAM_FUNC HAL_FLASHEx_DisableFlashSleepMode(void); -/** - * @} - */ - -/** - * @} - */ -#endif /* STM32F411xE */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_FLASH_RAMFUNC_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpi2c.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpi2c.h deleted file mode 100644 index 1db990f..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpi2c.h +++ /dev/null @@ -1,577 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_fmpi2c.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of FMPI2C HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_FMPI2C_H -#define __STM32F4xx_HAL_FMPI2C_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F446xx) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FMPI2C - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup FMPI2C_Exported_Types FMPI2C Exported Types - * @{ - */ - -/** - * @brief FMPI2C Configuration Structure definition - */ -typedef struct -{ - uint32_t Timing; /*!< Specifies the FMPI2C_TIMINGR_register value. - This parameter calculated by referring to FMPI2C initialization - section in Reference manual */ - - uint32_t OwnAddress1; /*!< Specifies the first device own address. - This parameter can be a 7-bit or 10-bit address. */ - - uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. - This parameter can be a value of @ref FMPI2C_addressing_mode */ - - uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. - This parameter can be a value of @ref FMPI2C_dual_addressing_mode */ - - uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected - This parameter can be a 7-bit address. */ - - uint32_t OwnAddress2Masks; /*!< Specifies the acknoledge mask address second device own address if dual addressing mode is selected - This parameter can be a value of @ref FMPI2C_own_address2_masks */ - - uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. - This parameter can be a value of @ref FMPI2C_general_call_addressing_mode */ - - uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. - This parameter can be a value of @ref FMPI2C_nostretch_mode */ - -}FMPI2C_InitTypeDef; - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_FMPI2C_STATE_RESET = 0x00, /*!< FMPI2C not yet initialized or disabled */ - HAL_FMPI2C_STATE_READY = 0x01, /*!< FMPI2C initialized and ready for use */ - HAL_FMPI2C_STATE_BUSY = 0x02, /*!< FMPI2C internal process is ongoing */ - HAL_FMPI2C_STATE_MASTER_BUSY_TX = 0x12, /*!< Master Data Transmission process is ongoing */ - HAL_FMPI2C_STATE_MASTER_BUSY_RX = 0x22, /*!< Master Data Reception process is ongoing */ - HAL_FMPI2C_STATE_SLAVE_BUSY_TX = 0x32, /*!< Slave Data Transmission process is ongoing */ - HAL_FMPI2C_STATE_SLAVE_BUSY_RX = 0x42, /*!< Slave Data Reception process is ongoing */ - HAL_FMPI2C_STATE_MEM_BUSY_TX = 0x52, /*!< Memory Data Transmission process is ongoing */ - HAL_FMPI2C_STATE_MEM_BUSY_RX = 0x62, /*!< Memory Data Reception process is ongoing */ - HAL_FMPI2C_STATE_TIMEOUT = 0x03, /*!< Timeout state */ - HAL_FMPI2C_STATE_ERROR = 0x04 /*!< Reception process is ongoing */ -}HAL_FMPI2C_StateTypeDef; - -/** - * @brief HAL FMPI2C Error Code structure definition - */ -typedef enum -{ - HAL_FMPI2C_ERROR_NONE = 0x00, /*!< No error */ - HAL_FMPI2C_ERROR_BERR = 0x01, /*!< BERR error */ - HAL_FMPI2C_ERROR_ARLO = 0x02, /*!< ARLO error */ - HAL_FMPI2C_ERROR_AF = 0x04, /*!< ACKF error */ - HAL_FMPI2C_ERROR_OVR = 0x08, /*!< OVR error */ - HAL_FMPI2C_ERROR_DMA = 0x10, /*!< DMA transfer error */ - HAL_FMPI2C_ERROR_TIMEOUT = 0x20, /*!< Timeout error */ - HAL_FMPI2C_ERROR_SIZE = 0x40 /*!< Size Management error */ -}HAL_FMPI2C_ErrorTypeDef; - -/** - * @brief FMPI2C handle Structure definition - */ -typedef struct -{ - FMPI2C_TypeDef *Instance; /*!< FMPI2C registers base address */ - - FMPI2C_InitTypeDef Init; /*!< FMPI2C communication parameters */ - - uint8_t *pBuffPtr; /*!< Pointer to FMPI2C transfer buffer */ - - uint16_t XferSize; /*!< FMPI2C transfer size */ - - __IO uint16_t XferCount; /*!< FMPI2C transfer counter */ - - DMA_HandleTypeDef *hdmatx; /*!< FMPI2C Tx DMA handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< FMPI2C Rx DMA handle parameters */ - - HAL_LockTypeDef Lock; /*!< FMPI2C locking object */ - - __IO HAL_FMPI2C_StateTypeDef State; /*!< FMPI2C communication state */ - - __IO HAL_FMPI2C_ErrorTypeDef ErrorCode; /* FMPI2C Error code */ - -}FMPI2C_HandleTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup FMPI2C_Exported_Constants FMPI2C Exported Constants - * @{ - */ - -/** @defgroup FMPI2C_addressing_mode FMPI2C addressing mode - * @{ - */ -#define FMPI2C_ADDRESSINGMODE_7BIT ((uint32_t)0x00000001) -#define FMPI2C_ADDRESSINGMODE_10BIT ((uint32_t)0x00000002) - -/** - * @} - */ - -/** @defgroup FMPI2C_dual_addressing_mode FMPI2C dual addressing mode - * @{ - */ - -#define FMPI2C_DUALADDRESS_DISABLE ((uint32_t)0x00000000) -#define FMPI2C_DUALADDRESS_ENABLE FMPI2C_OAR2_OA2EN - -/** - * @} - */ - -/** @defgroup FMPI2C_own_address2_masks FMPI2C own address2 masks - * @{ - */ - -#define FMPI2C_OA2_NOMASK ((uint8_t)0x00) -#define FMPI2C_OA2_MASK01 ((uint8_t)0x01) -#define FMPI2C_OA2_MASK02 ((uint8_t)0x02) -#define FMPI2C_OA2_MASK03 ((uint8_t)0x03) -#define FMPI2C_OA2_MASK04 ((uint8_t)0x04) -#define FMPI2C_OA2_MASK05 ((uint8_t)0x05) -#define FMPI2C_OA2_MASK06 ((uint8_t)0x06) -#define FMPI2C_OA2_MASK07 ((uint8_t)0x07) - -/** - * @} - */ - -/** @defgroup FMPI2C_general_call_addressing_mode FMPI2C general call addressing mode - * @{ - */ -#define FMPI2C_GENERALCALL_DISABLE ((uint32_t)0x00000000) -#define FMPI2C_GENERALCALL_ENABLE FMPI2C_CR1_GCEN - -/** - * @} - */ - -/** @defgroup FMPI2C_nostretch_mode FMPI2C nostretch mode - * @{ - */ -#define FMPI2C_NOSTRETCH_DISABLE ((uint32_t)0x00000000) -#define FMPI2C_NOSTRETCH_ENABLE FMPI2C_CR1_NOSTRETCH - -/** - * @} - */ - -/** @defgroup FMPI2C_Memory_Address_Size FMPI2C Memory Address Size - * @{ - */ -#define FMPI2C_MEMADD_SIZE_8BIT ((uint32_t)0x00000001) -#define FMPI2C_MEMADD_SIZE_16BIT ((uint32_t)0x00000002) - -/** - * @} - */ - -/** @defgroup FMPI2C_ReloadEndMode_definition FMPI2C ReloadEndMode definition - * @{ - */ - -#define FMPI2C_RELOAD_MODE FMPI2C_CR2_RELOAD -#define FMPI2C_AUTOEND_MODE FMPI2C_CR2_AUTOEND -#define FMPI2C_SOFTEND_MODE ((uint32_t)0x00000000) - -/** - * @} - */ - -/** @defgroup FMPI2C_StartStopMode_definition FMPI2C StartStopMode definition - * @{ - */ - -#define FMPI2C_NO_STARTSTOP ((uint32_t)0x00000000) -#define FMPI2C_GENERATE_STOP FMPI2C_CR2_STOP -#define FMPI2C_GENERATE_START_READ (uint32_t)(FMPI2C_CR2_START | FMPI2C_CR2_RD_WRN) -#define FMPI2C_GENERATE_START_WRITE FMPI2C_CR2_START - -/** - * @} - */ - -/** @defgroup FMPI2C_Interrupt_configuration_definition FMPI2C Interrupt configuration definition - * @brief FMPI2C Interrupt definition - * Elements values convention: 0xXXXXXXXX - * - XXXXXXXX : Interrupt control mask - * @{ - */ -#define FMPI2C_IT_ERRI FMPI2C_CR1_ERRIE -#define FMPI2C_IT_TCI FMPI2C_CR1_TCIE -#define FMPI2C_IT_STOPI FMPI2C_CR1_STOPIE -#define FMPI2C_IT_NACKI FMPI2C_CR1_NACKIE -#define FMPI2C_IT_ADDRI FMPI2C_CR1_ADDRIE -#define FMPI2C_IT_RXI FMPI2C_CR1_RXIE -#define FMPI2C_IT_TXI FMPI2C_CR1_TXIE - -/** - * @} - */ - - -/** @defgroup FMPI2C_Flag_definition FMPI2C Flag definition - * @{ - */ - -#define FMPI2C_FLAG_TXE FMPI2C_ISR_TXE -#define FMPI2C_FLAG_TXIS FMPI2C_ISR_TXIS -#define FMPI2C_FLAG_RXNE FMPI2C_ISR_RXNE -#define FMPI2C_FLAG_ADDR FMPI2C_ISR_ADDR -#define FMPI2C_FLAG_AF FMPI2C_ISR_NACKF -#define FMPI2C_FLAG_STOPF FMPI2C_ISR_STOPF -#define FMPI2C_FLAG_TC FMPI2C_ISR_TC -#define FMPI2C_FLAG_TCR FMPI2C_ISR_TCR -#define FMPI2C_FLAG_BERR FMPI2C_ISR_BERR -#define FMPI2C_FLAG_ARLO FMPI2C_ISR_ARLO -#define FMPI2C_FLAG_OVR FMPI2C_ISR_OVR -#define FMPI2C_FLAG_PECERR FMPI2C_ISR_PECERR -#define FMPI2C_FLAG_TIMEOUT FMPI2C_ISR_TIMEOUT -#define FMPI2C_FLAG_ALERT FMPI2C_ISR_ALERT -#define FMPI2C_FLAG_BUSY FMPI2C_ISR_BUSY -#define FMPI2C_FLAG_DIR FMPI2C_ISR_DIR - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup FMPI2C_Exported_Macros FMPI2C Exported Macros - * @{ - */ - -/** @brief Reset FMPI2C handle state - * @param __HANDLE__: specifies the FMPI2C Handle. - * This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral. - * @retval None - */ -#define __HAL_FMPI2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_FMPI2C_STATE_RESET) - -/** @brief Enables or disables the specified FMPI2C interrupts. - * @param __HANDLE__: specifies the FMPI2C Handle. - * This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral. - * @param __INTERRUPT__: specifies the interrupt source to enable or disable. - * This parameter can be one of the following values: - * @arg FMPI2C_IT_ERRI: Errors interrupt enable - * @arg FMPI2C_IT_TCI: Transfer complete interrupt enable - * @arg FMPI2C_IT_STOPI: STOP detection interrupt enable - * @arg FMPI2C_IT_NACKI: NACK received interrupt enable - * @arg FMPI2C_IT_ADDRI: Address match interrupt enable - * @arg FMPI2C_IT_RXI: RX interrupt enable - * @arg FMPI2C_IT_TXI: TX interrupt enable - * - * @retval None - */ - -#define __HAL_FMPI2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 |= (__INTERRUPT__)) -#define __HAL_FMPI2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR1 &= (~(__INTERRUPT__))) - -/** @brief Checks if the specified FMPI2C interrupt source is enabled or disabled. - * @param __HANDLE__: specifies the FMPI2C Handle. - * This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral. - * @param __INTERRUPT__: specifies the FMPI2C interrupt source to check. - * This parameter can be one of the following values: - * @arg FMPI2C_IT_ERRI: Errors interrupt enable - * @arg FMPI2C_IT_TCI: Transfer complete interrupt enable - * @arg FMPI2C_IT_STOPI: STOP detection interrupt enable - * @arg FMPI2C_IT_NACKI: NACK received interrupt enable - * @arg FMPI2C_IT_ADDRI: Address match interrupt enable - * @arg FMPI2C_IT_RXI: RX interrupt enable - * @arg FMPI2C_IT_TXI: TX interrupt enable - * - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_FMPI2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR1 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Checks whether the specified FMPI2C flag is set or not. - * @param __HANDLE__: specifies the FMPI2C Handle. - * This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg FMPI2C_FLAG_TXE: Transmit data register empty - * @arg FMPI2C_FLAG_TXIS: Transmit interrupt status - * @arg FMPI2C_FLAG_RXNE: Receive data register not empty - * @arg FMPI2C_FLAG_ADDR: Address matched (slave mode) - * @arg FMPI2C_FLAG_AF: Acknowledge failure received flag - * @arg FMPI2C_FLAG_STOPF: STOP detection flag - * @arg FMPI2C_FLAG_TC: Transfer complete (master mode) - * @arg FMPI2C_FLAG_TCR: Transfer complete reload - * @arg FMPI2C_FLAG_BERR: Bus error - * @arg FMPI2C_FLAG_ARLO: Arbitration lost - * @arg FMPI2C_FLAG_OVR: Overrun/Underrun - * @arg FMPI2C_FLAG_PECERR: PEC error in reception - * @arg FMPI2C_FLAG_TIMEOUT: Timeout or Tlow detection flag - * @arg FMPI2C_FLAG_ALERT: SMBus alert - * @arg FMPI2C_FLAG_BUSY: Bus busy - * @arg FMPI2C_FLAG_DIR: Transfer direction (slave mode) - * - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_FMPI2C_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & ((__FLAG__) & FMPI2C_FLAG_MASK)) == ((__FLAG__) & FMPI2C_FLAG_MASK))) - -/** @brief Clears the FMPI2C pending flags which are cleared by writing 1 in a specific bit. - * @param __HANDLE__: specifies the FMPI2C Handle. - * This parameter can be FMPI2C where x: 1 or 2 to select the FMPI2C peripheral. - * @param __FLAG__: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg FMPI2C_FLAG_ADDR: Address matched (slave mode) - * @arg FMPI2C_FLAG_AF: Acknowledge failure received flag - * @arg FMPI2C_FLAG_STOPF: STOP detection flag - * @arg FMPI2C_FLAG_BERR: Bus error - * @arg FMPI2C_FLAG_ARLO: Arbitration lost - * @arg FMPI2C_FLAG_OVR: Overrun/Underrun - * @arg FMPI2C_FLAG_PECERR: PEC error in reception - * @arg FMPI2C_FLAG_TIMEOUT: Timeout or Tlow detection flag - * @arg FMPI2C_FLAG_ALERT: SMBus alert - * - * @retval None - */ -#define __HAL_FMPI2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = ((__FLAG__) & FMPI2C_FLAG_MASK)) - - -#define __HAL_FMPI2C_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= FMPI2C_CR1_PE) -#define __HAL_FMPI2C_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~FMPI2C_CR1_PE) - -#define __HAL_FMPI2C_RESET_CR2(__HANDLE__) ((__HANDLE__)->Instance->CR2 &= (uint32_t)~((uint32_t)(FMPI2C_CR2_SADD | FMPI2C_CR2_HEAD10R | FMPI2C_CR2_NBYTES | FMPI2C_CR2_RELOAD | FMPI2C_CR2_RD_WRN))) - -#define __HAL_FMPI2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00))) >> 8))) -#define __HAL_FMPI2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF)))) - -#define __HAL_FMPI2C_GENERATE_START(__ADDMODE__,__ADDRESS__) (((__ADDMODE__) == FMPI2C_ADDRESSINGMODE_7BIT) ? (uint32_t)((((uint32_t)(__ADDRESS__) & (FMPI2C_CR2_SADD)) | (FMPI2C_CR2_START) | (FMPI2C_CR2_AUTOEND)) & (~FMPI2C_CR2_RD_WRN)) : \ - (uint32_t)((((uint32_t)(__ADDRESS__) & (FMPI2C_CR2_SADD)) | (FMPI2C_CR2_ADD10) | (FMPI2C_CR2_START)) & (~FMPI2C_CR2_RD_WRN))) - -#define IS_FMPI2C_OWN_ADDRESS1(ADDRESS1) ((ADDRESS1) <= (uint32_t)0x000003FF) -#define IS_FMPI2C_OWN_ADDRESS2(ADDRESS2) ((ADDRESS2) <= (uint16_t)0x00FF) - -/** - * @} - */ - -/* Include FMPI2C HAL Extension module */ -#include "stm32f4xx_hal_fmpi2c_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FMPI2C_Exported_Functions - * @{ - */ - -/** @addtogroup FMPI2C_Exported_Functions_Group1 - * @{ - */ - -/* Initialization/de-initialization functions**********************************/ -HAL_StatusTypeDef HAL_FMPI2C_Init(FMPI2C_HandleTypeDef *hFMPI2C); -HAL_StatusTypeDef HAL_FMPI2C_DeInit (FMPI2C_HandleTypeDef *hFMPI2C); -void HAL_FMPI2C_MspInit(FMPI2C_HandleTypeDef *hFMPI2C); -void HAL_FMPI2C_MspDeInit(FMPI2C_HandleTypeDef *hFMPI2C); - -/** - * @} - */ - -/** @addtogroup FMPI2C_Exported_Functions_Group2 - * @{ - */ - -/* I/O operation functions ***************************************************/ - /******* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_FMPI2C_Master_Receive(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_FMPI2C_Mem_Write(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_FMPI2C_Mem_Read(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_FMPI2C_IsDeviceReady(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout); - - /******* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_IT(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); - - /******* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_FMPI2C_Master_Transmit_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_FMPI2C_Master_Receive_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_FMPI2C_Slave_Transmit_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_FMPI2C_Slave_Receive_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_FMPI2C_Mem_Write_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_FMPI2C_Mem_Read_DMA(FMPI2C_HandleTypeDef *hFMPI2C, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); - - /******* FMPI2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ -void HAL_FMPI2C_EV_IRQHandler(FMPI2C_HandleTypeDef *hFMPI2C); -void HAL_FMPI2C_ER_IRQHandler(FMPI2C_HandleTypeDef *hFMPI2C); -void HAL_FMPI2C_MasterTxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C); -void HAL_FMPI2C_MasterRxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C); -void HAL_FMPI2C_SlaveTxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C); -void HAL_FMPI2C_SlaveRxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C); -void HAL_FMPI2C_MemTxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C); -void HAL_FMPI2C_MemRxCpltCallback(FMPI2C_HandleTypeDef *hFMPI2C); -void HAL_FMPI2C_ErrorCallback(FMPI2C_HandleTypeDef *hFMPI2C); -/** - * @} - */ - -/** @addtogroup FMPI2C_Exported_Functions_Group3 - * @{ - */ - -/* Peripheral State functions ************************************************/ -HAL_FMPI2C_StateTypeDef HAL_FMPI2C_GetState(FMPI2C_HandleTypeDef *hFMPI2C); -uint32_t HAL_FMPI2C_GetError(FMPI2C_HandleTypeDef *hFMPI2C); - -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ - -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup FMPI2C_Private_Constants FMPI2C Private Constants - * @{ - */ -#define FMPI2C_FLAG_MASK ((uint32_t)0x0001FFFF) -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup FMPI2C_Private_Macros FMPI2C Private Macros - * @{ - */ - -#define IS_FMPI2C_ADDRESSING_MODE(MODE) (((MODE) == FMPI2C_ADDRESSINGMODE_7BIT) || \ - ((MODE) == FMPI2C_ADDRESSINGMODE_10BIT)) - -#define IS_FMPI2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == FMPI2C_DUALADDRESS_DISABLE) || \ - ((ADDRESS) == FMPI2C_DUALADDRESS_ENABLE)) - -#define IS_FMPI2C_OWN_ADDRESS2_MASK(MASK) (((MASK) == FMPI2C_OA2_NOMASK) || \ - ((MASK) == FMPI2C_OA2_MASK01) || \ - ((MASK) == FMPI2C_OA2_MASK02) || \ - ((MASK) == FMPI2C_OA2_MASK03) || \ - ((MASK) == FMPI2C_OA2_MASK04) || \ - ((MASK) == FMPI2C_OA2_MASK05) || \ - ((MASK) == FMPI2C_OA2_MASK06) || \ - ((MASK) == FMPI2C_OA2_MASK07)) - -#define IS_FMPI2C_GENERAL_CALL(CALL) (((CALL) == FMPI2C_GENERALCALL_DISABLE) || \ - ((CALL) == FMPI2C_GENERALCALL_ENABLE)) - -#define IS_FMPI2C_NO_STRETCH(STRETCH) (((STRETCH) == FMPI2C_NOSTRETCH_DISABLE) || \ - ((STRETCH) == FMPI2C_NOSTRETCH_ENABLE)) - -#define IS_FMPI2C_MEMADD_SIZE(SIZE) (((SIZE) == FMPI2C_MEMADD_SIZE_8BIT) || \ - ((SIZE) == FMPI2C_MEMADD_SIZE_16BIT)) - -#define IS_TRANSFER_MODE(MODE) (((MODE) == FMPI2C_RELOAD_MODE) || \ - ((MODE) == FMPI2C_AUTOEND_MODE) || \ - ((MODE) == FMPI2C_SOFTEND_MODE)) - -#define IS_TRANSFER_REQUEST(REQUEST) (((REQUEST) == FMPI2C_GENERATE_STOP) || \ - ((REQUEST) == FMPI2C_GENERATE_START_READ) || \ - ((REQUEST) == FMPI2C_GENERATE_START_WRITE) || \ - ((REQUEST) == FMPI2C_NO_STARTSTOP)) - -/** - * @} - */ -/* Private functions ---------------------------------------------------------*/ -/** @defgroup FMPI2C_Private_Functions FMPI2C Private Functions - * @brief FMPI2C private functions - * @{ - */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* STM32F446xx */ -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_HAL_FMPI2C_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpi2c_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpi2c_ex.h deleted file mode 100644 index e2d604b..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_fmpi2c_ex.h +++ /dev/null @@ -1,151 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_fmpi2c_ex.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of FMPI2C HAL Extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_FMPI2C_EX_H -#define __STM32F4xx_HAL_FMPI2C_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F446xx) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FMPI2CEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup FMPI2CEx_Exported_Constants FMPI2C Exported Constants - * @{ - */ - -/** @defgroup FMPI2CEx_Analog_Filter FMPI2C Analog Filter - * @{ - */ -#define FMPI2C_ANALOGFILTER_ENABLE ((uint32_t)0x00000000) -#define FMPI2C_ANALOGFILTER_DISABLE FMPI2C_CR1_ANFOFF -/** - * @} - */ - -/** @defgroup FMPI2CEx_FastModePlus FMPI2C Fast Mode Plus - * @{ - */ -#define FMPI2C_FASTMODEPLUS_SCL SYSCFG_CFGR_FMPI2C1_SCL /*!< Enable Fast Mode Plus on FMPI2C1 SCL pins */ -#define FMPI2C_FASTMODEPLUS_SDA SYSCFG_CFGR_FMPI2C1_SDA /*!< Enable Fast Mode Plus on FMPI2C1 SDA pins */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup FMPI2CEx_Exported_Functions - * @{ - */ - -/** @addtogroup FMPI2CEx_Exported_Functions_Group1 - * @{ - */ -/* Peripheral Control functions ************************************************/ -HAL_StatusTypeDef HAL_FMPI2CEx_AnalogFilter_Config(FMPI2C_HandleTypeDef *hFMPI2C, uint32_t AnalogFilter); -HAL_StatusTypeDef HAL_FMPI2CEx_DigitalFilter_Config(FMPI2C_HandleTypeDef *hFMPI2C, uint32_t DigitalFilter); -HAL_StatusTypeDef HAL_FMPI2CEx_EnableWakeUp (FMPI2C_HandleTypeDef *hFMPI2C); -HAL_StatusTypeDef HAL_FMPI2CEx_DisableWakeUp (FMPI2C_HandleTypeDef *hFMPI2C); -void HAL_FMPI2CEx_EnableFastModePlus(uint32_t ConfigFastModePlus); -void HAL_FMPI2CEx_DisableFastModePlus(uint32_t ConfigFastModePlus); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup I2CEx_Private_Constants I2C Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup I2CEx_Private_Macros I2C Private Macros - * @{ - */ -#define IS_FMPI2C_ANALOG_FILTER(FILTER) (((FILTER) == FMPI2C_ANALOGFILTER_ENABLE) || \ - ((FILTER) == FMPI2C_ANALOGFILTER_DISABLE)) - -#define IS_FMPI2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000F) - -#define IS_FMPI2C_FASTMODEPLUS(__CONFIG__) ((((__CONFIG__) & (FMPI2C_FASTMODEPLUS_SCL)) == FMPI2C_FASTMODEPLUS_SCL) || \ - (((__CONFIG__) & (FMPI2C_FASTMODEPLUS_SDA)) == FMPI2C_FASTMODEPLUS_SDA)) -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* STM32F446xx */ -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_FMPI2C_EX_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h deleted file mode 100644 index 0b98239..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio.h +++ /dev/null @@ -1,327 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_gpio.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of GPIO HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_GPIO_H -#define __STM32F4xx_HAL_GPIO_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup GPIO - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup GPIO_Exported_Types GPIO Exported Types - * @{ - */ - -/** - * @brief GPIO Init structure definition - */ -typedef struct -{ - uint32_t Pin; /*!< Specifies the GPIO pins to be configured. - This parameter can be any value of @ref GPIO_pins_define */ - - uint32_t Mode; /*!< Specifies the operating mode for the selected pins. - This parameter can be a value of @ref GPIO_mode_define */ - - uint32_t Pull; /*!< Specifies the Pull-up or Pull-Down activation for the selected pins. - This parameter can be a value of @ref GPIO_pull_define */ - - uint32_t Speed; /*!< Specifies the speed for the selected pins. - This parameter can be a value of @ref GPIO_speed_define */ - - uint32_t Alternate; /*!< Peripheral to be connected to the selected pins. - This parameter can be a value of @ref GPIO_Alternate_function_selection */ -}GPIO_InitTypeDef; - -/** - * @brief GPIO Bit SET and Bit RESET enumeration - */ -typedef enum -{ - GPIO_PIN_RESET = 0, - GPIO_PIN_SET -}GPIO_PinState; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup GPIO_Exported_Constants GPIO Exported Constants - * @{ - */ - -/** @defgroup GPIO_pins_define GPIO pins define - * @{ - */ -#define GPIO_PIN_0 ((uint16_t)0x0001) /* Pin 0 selected */ -#define GPIO_PIN_1 ((uint16_t)0x0002) /* Pin 1 selected */ -#define GPIO_PIN_2 ((uint16_t)0x0004) /* Pin 2 selected */ -#define GPIO_PIN_3 ((uint16_t)0x0008) /* Pin 3 selected */ -#define GPIO_PIN_4 ((uint16_t)0x0010) /* Pin 4 selected */ -#define GPIO_PIN_5 ((uint16_t)0x0020) /* Pin 5 selected */ -#define GPIO_PIN_6 ((uint16_t)0x0040) /* Pin 6 selected */ -#define GPIO_PIN_7 ((uint16_t)0x0080) /* Pin 7 selected */ -#define GPIO_PIN_8 ((uint16_t)0x0100) /* Pin 8 selected */ -#define GPIO_PIN_9 ((uint16_t)0x0200) /* Pin 9 selected */ -#define GPIO_PIN_10 ((uint16_t)0x0400) /* Pin 10 selected */ -#define GPIO_PIN_11 ((uint16_t)0x0800) /* Pin 11 selected */ -#define GPIO_PIN_12 ((uint16_t)0x1000) /* Pin 12 selected */ -#define GPIO_PIN_13 ((uint16_t)0x2000) /* Pin 13 selected */ -#define GPIO_PIN_14 ((uint16_t)0x4000) /* Pin 14 selected */ -#define GPIO_PIN_15 ((uint16_t)0x8000) /* Pin 15 selected */ -#define GPIO_PIN_All ((uint16_t)0xFFFF) /* All pins selected */ - -#define GPIO_PIN_MASK ((uint32_t)0x0000FFFF) /* PIN mask for assert test */ -/** - * @} - */ - -/** @defgroup GPIO_mode_define GPIO mode define - * @brief GPIO Configuration Mode - * Elements values convention: 0xX0yz00YZ - * - X : GPIO mode or EXTI Mode - * - y : External IT or Event trigger detection - * - z : IO configuration on External IT or Event - * - Y : Output type (Push Pull or Open Drain) - * - Z : IO Direction mode (Input, Output, Alternate or Analog) - * @{ - */ -#define GPIO_MODE_INPUT ((uint32_t)0x00000000) /*!< Input Floating Mode */ -#define GPIO_MODE_OUTPUT_PP ((uint32_t)0x00000001) /*!< Output Push Pull Mode */ -#define GPIO_MODE_OUTPUT_OD ((uint32_t)0x00000011) /*!< Output Open Drain Mode */ -#define GPIO_MODE_AF_PP ((uint32_t)0x00000002) /*!< Alternate Function Push Pull Mode */ -#define GPIO_MODE_AF_OD ((uint32_t)0x00000012) /*!< Alternate Function Open Drain Mode */ - -#define GPIO_MODE_ANALOG ((uint32_t)0x00000003) /*!< Analog Mode */ - -#define GPIO_MODE_IT_RISING ((uint32_t)0x10110000) /*!< External Interrupt Mode with Rising edge trigger detection */ -#define GPIO_MODE_IT_FALLING ((uint32_t)0x10210000) /*!< External Interrupt Mode with Falling edge trigger detection */ -#define GPIO_MODE_IT_RISING_FALLING ((uint32_t)0x10310000) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ - -#define GPIO_MODE_EVT_RISING ((uint32_t)0x10120000) /*!< External Event Mode with Rising edge trigger detection */ -#define GPIO_MODE_EVT_FALLING ((uint32_t)0x10220000) /*!< External Event Mode with Falling edge trigger detection */ -#define GPIO_MODE_EVT_RISING_FALLING ((uint32_t)0x10320000) /*!< External Event Mode with Rising/Falling edge trigger detection */ -/** - * @} - */ - -/** @defgroup GPIO_speed_define GPIO speed define - * @brief GPIO Output Maximum frequency - * @{ - */ -#define GPIO_SPEED_LOW ((uint32_t)0x00000000) /*!< Low speed */ -#define GPIO_SPEED_MEDIUM ((uint32_t)0x00000001) /*!< Medium speed */ -#define GPIO_SPEED_FAST ((uint32_t)0x00000002) /*!< Fast speed */ -#define GPIO_SPEED_HIGH ((uint32_t)0x00000003) /*!< High speed */ -/** - * @} - */ - - /** @defgroup GPIO_pull_define GPIO pull define - * @brief GPIO Pull-Up or Pull-Down Activation - * @{ - */ -#define GPIO_NOPULL ((uint32_t)0x00000000) /*!< No Pull-up or Pull-down activation */ -#define GPIO_PULLUP ((uint32_t)0x00000001) /*!< Pull-up activation */ -#define GPIO_PULLDOWN ((uint32_t)0x00000002) /*!< Pull-down activation */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup GPIO_Exported_Macros GPIO Exported Macros - * @{ - */ - -/** - * @brief Checks whether the specified EXTI line flag is set or not. - * @param __EXTI_LINE__: specifies the EXTI line flag to check. - * This parameter can be GPIO_PIN_x where x can be(0..15) - * @retval The new state of __EXTI_LINE__ (SET or RESET). - */ -#define __HAL_GPIO_EXTI_GET_FLAG(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) - -/** - * @brief Clears the EXTI's line pending flags. - * @param __EXTI_LINE__: specifies the EXTI lines flags to clear. - * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) - * @retval None - */ -#define __HAL_GPIO_EXTI_CLEAR_FLAG(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) - -/** - * @brief Checks whether the specified EXTI line is asserted or not. - * @param __EXTI_LINE__: specifies the EXTI line to check. - * This parameter can be GPIO_PIN_x where x can be(0..15) - * @retval The new state of __EXTI_LINE__ (SET or RESET). - */ -#define __HAL_GPIO_EXTI_GET_IT(__EXTI_LINE__) (EXTI->PR & (__EXTI_LINE__)) - -/** - * @brief Clears the EXTI's line pending bits. - * @param __EXTI_LINE__: specifies the EXTI lines to clear. - * This parameter can be any combination of GPIO_PIN_x where x can be (0..15) - * @retval None - */ -#define __HAL_GPIO_EXTI_CLEAR_IT(__EXTI_LINE__) (EXTI->PR = (__EXTI_LINE__)) - -/** - * @brief Generates a Software interrupt on selected EXTI line. - * @param __EXTI_LINE__: specifies the EXTI line to check. - * This parameter can be GPIO_PIN_x where x can be(0..15) - * @retval None - */ -#define __HAL_GPIO_EXTI_GENERATE_SWIT(__EXTI_LINE__) (EXTI->SWIER |= (__EXTI_LINE__)) -/** - * @} - */ - -/* Include GPIO HAL Extension module */ -#include "stm32f4xx_hal_gpio_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup GPIO_Exported_Functions - * @{ - */ - -/** @addtogroup GPIO_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions *****************************/ -void HAL_GPIO_Init(GPIO_TypeDef *GPIOx, GPIO_InitTypeDef *GPIO_Init); -void HAL_GPIO_DeInit(GPIO_TypeDef *GPIOx, uint32_t GPIO_Pin); -/** - * @} - */ - -/** @addtogroup GPIO_Exported_Functions_Group2 - * @{ - */ -/* IO operation functions *****************************************************/ -GPIO_PinState HAL_GPIO_ReadPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void HAL_GPIO_WritePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin, GPIO_PinState PinState); -void HAL_GPIO_TogglePin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -HAL_StatusTypeDef HAL_GPIO_LockPin(GPIO_TypeDef* GPIOx, uint16_t GPIO_Pin); -void HAL_GPIO_EXTI_IRQHandler(uint16_t GPIO_Pin); -void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin); - -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup GPIO_Private_Constants GPIO Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup GPIO_Private_Macros GPIO Private Macros - * @{ - */ -#define IS_GPIO_PIN_ACTION(ACTION) (((ACTION) == GPIO_PIN_RESET) || ((ACTION) == GPIO_PIN_SET)) -#define IS_GPIO_PIN(PIN) (((PIN) & GPIO_PIN_MASK ) != (uint32_t)0x00) -#define IS_GPIO_MODE(MODE) (((MODE) == GPIO_MODE_INPUT) ||\ - ((MODE) == GPIO_MODE_OUTPUT_PP) ||\ - ((MODE) == GPIO_MODE_OUTPUT_OD) ||\ - ((MODE) == GPIO_MODE_AF_PP) ||\ - ((MODE) == GPIO_MODE_AF_OD) ||\ - ((MODE) == GPIO_MODE_IT_RISING) ||\ - ((MODE) == GPIO_MODE_IT_FALLING) ||\ - ((MODE) == GPIO_MODE_IT_RISING_FALLING) ||\ - ((MODE) == GPIO_MODE_EVT_RISING) ||\ - ((MODE) == GPIO_MODE_EVT_FALLING) ||\ - ((MODE) == GPIO_MODE_EVT_RISING_FALLING) ||\ - ((MODE) == GPIO_MODE_ANALOG)) -#define IS_GPIO_SPEED(SPEED) (((SPEED) == GPIO_SPEED_LOW) || ((SPEED) == GPIO_SPEED_MEDIUM) || \ - ((SPEED) == GPIO_SPEED_FAST) || ((SPEED) == GPIO_SPEED_HIGH)) -#define IS_GPIO_PULL(PULL) (((PULL) == GPIO_NOPULL) || ((PULL) == GPIO_PULLUP) || \ - ((PULL) == GPIO_PULLDOWN)) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup GPIO_Private_Functions GPIO Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_GPIO_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h deleted file mode 100644 index 1ca1dcb..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_gpio_ex.h +++ /dev/null @@ -1,1100 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_gpio_ex.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of GPIO HAL Extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_GPIO_EX_H -#define __STM32F4xx_HAL_GPIO_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup GPIOEx GPIOEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup GPIOEx_Exported_Constants GPIO Exported Constants - * @{ - */ - -/** @defgroup GPIO_Alternate_function_selection GPIO Alternate Function Selection - * @{ - */ - -/*------------------------------------------ STM32F429xx/STM32F439xx --------------------------------------*/ -#if defined (STM32F429xx) || defined (STM32F439xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ -#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */ -#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ -#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */ -#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_LTDC ((uint8_t)0x09) /* LCD-TFT Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FMC ((uint8_t)0xC) /* FMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ - -/** - * @brief AF 14 selection - */ -#define GPIO_AF14_LTDC ((uint8_t)0x0E) /* LCD-TFT Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F429xx || STM32F439xx */ -/*------------------------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F427xx/STM32F437xx--------------------------------*/ -#if defined (STM32F427xx) || defined (STM32F437xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ -#define GPIO_AF5_SPI5 ((uint8_t)0x05) /* SPI5 Alternate Function mapping */ -#define GPIO_AF5_SPI6 ((uint8_t)0x05) /* SPI6 Alternate Function mapping */ -/** @brief GPIO_Legacy - */ -#define GPIO_AF5_I2S3ext GPIO_AF5_SPI3 /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ -#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_UART7 ((uint8_t)0x08) /* UART7 Alternate Function mapping */ -#define GPIO_AF8_UART8 ((uint8_t)0x08) /* UART8 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FMC ((uint8_t)0xC) /* FMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F427xx || STM32F437xx */ -/*------------------------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F407xx/STM32F417xx--------------------------------*/ -#if defined (STM32F407xx) || defined (STM32F417xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FSMC ((uint8_t)0xC) /* FSMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F407xx || STM32F417xx */ -/*------------------------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F405xx/STM32F415xx--------------------------------*/ -#if defined (STM32F405xx) || defined (STM32F415xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FSMC ((uint8_t)0xC) /* FSMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F405xx || STM32F415xx */ - -/*------------------------------------------------------------------------------------------*/ - -/*---------------------------------------- STM32F401xx--------------------------------------*/ -#if defined(STM32F401xC) || defined(STM32F401xE) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ -#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */ - - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F401xC || STM32F401xE */ -/*------------------------------------------------------------------------------------------*/ - -/*---------------------------------------- STM32F411xx--------------------------------------*/ -#if defined(STM32F411xE) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ -#define GPIO_AF5_I2S3ext ((uint8_t)0x05) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* I2S2 Alternate Function mapping */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4/I2S4 Alternate Function mapping */ -#define GPIO_AF6_SPI5 ((uint8_t)0x06) /* SPI5/I2S5 Alternate Function mapping */ -#define GPIO_AF6_I2S2ext ((uint8_t)0x06) /* I2S2ext_SD Alternate Function mapping */ -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_I2S3ext ((uint8_t)0x07) /* I2S3ext_SD Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_I2C2 ((uint8_t)0x09) /* I2C2 Alternate Function mapping */ -#define GPIO_AF9_I2C3 ((uint8_t)0x09) /* I2C3 Alternate Function mapping */ - - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ -#endif /* STM32F411xE */ -/*---------------------------------------- STM32F446xx -------------------------------------------*/ -#if defined (STM32F446xx) -/** - * @brief AF 0 selection - */ -#define GPIO_AF0_RTC_50Hz ((uint8_t)0x00) /* RTC_50Hz Alternate Function mapping */ -#define GPIO_AF0_MCO ((uint8_t)0x00) /* MCO (MCO1 and MCO2) Alternate Function mapping */ -#define GPIO_AF0_TAMPER ((uint8_t)0x00) /* TAMPER (TAMPER_1 and TAMPER_2) Alternate Function mapping */ -#define GPIO_AF0_SWJ ((uint8_t)0x00) /* SWJ (SWD and JTAG) Alternate Function mapping */ -#define GPIO_AF0_TRACE ((uint8_t)0x00) /* TRACE Alternate Function mapping */ - -/** - * @brief AF 1 selection - */ -#define GPIO_AF1_TIM1 ((uint8_t)0x01) /* TIM1 Alternate Function mapping */ -#define GPIO_AF1_TIM2 ((uint8_t)0x01) /* TIM2 Alternate Function mapping */ - -/** - * @brief AF 2 selection - */ -#define GPIO_AF2_TIM3 ((uint8_t)0x02) /* TIM3 Alternate Function mapping */ -#define GPIO_AF2_TIM4 ((uint8_t)0x02) /* TIM4 Alternate Function mapping */ -#define GPIO_AF2_TIM5 ((uint8_t)0x02) /* TIM5 Alternate Function mapping */ - -/** - * @brief AF 3 selection - */ -#define GPIO_AF3_TIM8 ((uint8_t)0x03) /* TIM8 Alternate Function mapping */ -#define GPIO_AF3_TIM9 ((uint8_t)0x03) /* TIM9 Alternate Function mapping */ -#define GPIO_AF3_TIM10 ((uint8_t)0x03) /* TIM10 Alternate Function mapping */ -#define GPIO_AF3_TIM11 ((uint8_t)0x03) /* TIM11 Alternate Function mapping */ -#define GPIO_AF3_CEC ((uint8_t)0x03) /* CEC Alternate Function mapping */ - -/** - * @brief AF 4 selection - */ -#define GPIO_AF4_I2C1 ((uint8_t)0x04) /* I2C1 Alternate Function mapping */ -#define GPIO_AF4_I2C2 ((uint8_t)0x04) /* I2C2 Alternate Function mapping */ -#define GPIO_AF4_I2C3 ((uint8_t)0x04) /* I2C3 Alternate Function mapping */ -#define GPIO_AF4_FMPI2C1 ((uint8_t)0x04) /* FMPI2C1 Alternate Function mapping */ -#define GPIO_AF4_CEC ((uint8_t)0x04) /* CEC Alternate Function mapping */ - -/** - * @brief AF 5 selection - */ -#define GPIO_AF5_SPI1 ((uint8_t)0x05) /* SPI1/I2S1 Alternate Function mapping */ -#define GPIO_AF5_SPI2 ((uint8_t)0x05) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF5_SPI3 ((uint8_t)0x05) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF5_SPI4 ((uint8_t)0x05) /* SPI4 Alternate Function mapping */ - -/** - * @brief AF 6 selection - */ -#define GPIO_AF6_SPI2 ((uint8_t)0x06) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF6_SPI3 ((uint8_t)0x06) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF6_SPI4 ((uint8_t)0x06) /* SPI4 Alternate Function mapping */ -#define GPIO_AF6_SAI1 ((uint8_t)0x06) /* SAI1 Alternate Function mapping */ - -/** - * @brief AF 7 selection - */ -#define GPIO_AF7_USART1 ((uint8_t)0x07) /* USART1 Alternate Function mapping */ -#define GPIO_AF7_USART2 ((uint8_t)0x07) /* USART2 Alternate Function mapping */ -#define GPIO_AF7_USART3 ((uint8_t)0x07) /* USART3 Alternate Function mapping */ -#define GPIO_AF7_UART5 ((uint8_t)0x07) /* UART5 Alternate Function mapping */ -#define GPIO_AF7_SPI2 ((uint8_t)0x07) /* SPI2/I2S2 Alternate Function mapping */ -#define GPIO_AF7_SPI3 ((uint8_t)0x07) /* SPI3/I2S3 Alternate Function mapping */ -#define GPIO_AF7_SPDIFRX ((uint8_t)0x07) /* SPDIFRX Alternate Function mapping */ - -/** - * @brief AF 8 selection - */ -#define GPIO_AF8_UART4 ((uint8_t)0x08) /* UART4 Alternate Function mapping */ -#define GPIO_AF8_UART5 ((uint8_t)0x08) /* UART5 Alternate Function mapping */ -#define GPIO_AF8_USART6 ((uint8_t)0x08) /* USART6 Alternate Function mapping */ -#define GPIO_AF8_SPDIFRX ((uint8_t)0x08) /* SPDIFRX Alternate Function mapping */ -#define GPIO_AF8_SAI2 ((uint8_t)0x08) /* SAI2 Alternate Function mapping */ - -/** - * @brief AF 9 selection - */ -#define GPIO_AF9_CAN1 ((uint8_t)0x09) /* CAN1 Alternate Function mapping */ -#define GPIO_AF9_CAN2 ((uint8_t)0x09) /* CAN2 Alternate Function mapping */ -#define GPIO_AF9_TIM12 ((uint8_t)0x09) /* TIM12 Alternate Function mapping */ -#define GPIO_AF9_TIM13 ((uint8_t)0x09) /* TIM13 Alternate Function mapping */ -#define GPIO_AF9_TIM14 ((uint8_t)0x09) /* TIM14 Alternate Function mapping */ -#define GPIO_AF9_QSPI ((uint8_t)0x09) /* QSPI Alternate Function mapping */ - -/** - * @brief AF 10 selection - */ -#define GPIO_AF10_OTG_FS ((uint8_t)0xA) /* OTG_FS Alternate Function mapping */ -#define GPIO_AF10_OTG_HS ((uint8_t)0xA) /* OTG_HS Alternate Function mapping */ -#define GPIO_AF10_SAI2 ((uint8_t)0xA) /* SAI2 Alternate Function mapping */ -#define GPIO_AF10_QSPI ((uint8_t)0xA) /* QSPI Alternate Function mapping */ - -/** - * @brief AF 11 selection - */ -#define GPIO_AF11_ETH ((uint8_t)0x0B) /* ETHERNET Alternate Function mapping */ - -/** - * @brief AF 12 selection - */ -#define GPIO_AF12_FMC ((uint8_t)0xC) /* FMC Alternate Function mapping */ -#define GPIO_AF12_OTG_HS_FS ((uint8_t)0xC) /* OTG HS configured in FS, Alternate Function mapping */ -#define GPIO_AF12_SDIO ((uint8_t)0xC) /* SDIO Alternate Function mapping */ - -/** - * @brief AF 13 selection - */ -#define GPIO_AF13_DCMI ((uint8_t)0x0D) /* DCMI Alternate Function mapping */ - -/** - * @brief AF 15 selection - */ -#define GPIO_AF15_EVENTOUT ((uint8_t)0x0F) /* EVENTOUT Alternate Function mapping */ - -#endif /* STM32F446xx */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup GPIOEx_Exported_Macros GPIO Exported Macros - * @{ - */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup GPIOEx_Exported_Functions GPIO Exported Functions - * @{ - */ -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup GPIOEx_Private_Constants GPIO Private Constants - * @{ - */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup GPIOEx_Private_Macros GPIO Private Macros - * @{ - */ -/** @defgroup GPIOEx_Get_Port_Index GPIO Get Port Index - * @{ - */ -#if defined (STM32F405xx) || defined (STM32F415xx) || defined (STM32F407xx) || defined (STM32F417xx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U :\ - ((__GPIOx__) == (GPIOF))? 5U :\ - ((__GPIOx__) == (GPIOG))? 6U :\ - ((__GPIOx__) == (GPIOH))? 7U :\ - ((__GPIOx__) == (GPIOI))? 8U : 9U) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined (STM32F427xx) || defined (STM32F437xx) || defined (STM32F429xx) || defined (STM32F439xx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U :\ - ((__GPIOx__) == (GPIOF))? 5U :\ - ((__GPIOx__) == (GPIOG))? 6U :\ - ((__GPIOx__) == (GPIOH))? 7U :\ - ((__GPIOx__) == (GPIOI))? 8U :\ - ((__GPIOx__) == (GPIOJ))? 9U : 10U) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -#if defined (STM32F401xC) || defined (STM32F401xE) || defined (STM32F411xE) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U : 5U) -#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ - -#if defined (STM32F446xx) -#define GPIO_GET_INDEX(__GPIOx__) (uint8_t)(((__GPIOx__) == (GPIOA))? 0U :\ - ((__GPIOx__) == (GPIOB))? 1U :\ - ((__GPIOx__) == (GPIOC))? 2U :\ - ((__GPIOx__) == (GPIOD))? 3U :\ - ((__GPIOx__) == (GPIOE))? 4U :\ - ((__GPIOx__) == (GPIOF))? 5U :\ - ((__GPIOx__) == (GPIOG))? 6U : 8U) -#endif /* STM32F446xx */ - -/** - * @} - */ - -/** @defgroup GPIOEx_IS_Alternat_function_selection GPIO Check Alternate Function - * @{ - */ -/*------------------------- STM32F429xx/STM32F439xx---------------------------*/ -#if defined (STM32F429xx) || defined (STM32F439xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \ - ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \ - ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \ - ((AF) == GPIO_AF14_LTDC)) - -#endif /* STM32F429xx || STM32F439xx */ -/*------------------------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F427xx/STM32F437xx--------------------------------*/ -#if defined (STM32F427xx) || defined (STM32F437xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF5_SPI5) || ((AF) == GPIO_AF5_SPI6) || \ - ((AF) == GPIO_AF8_UART7) || ((AF) == GPIO_AF8_UART8) || \ - ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1)) - -#endif /* STM32F427xx || STM32F437xx */ -/*------------------------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F407xx/STM32F417xx--------------------------------*/ -#if defined (STM32F407xx) || defined (STM32F417xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT)) - -#endif /* STM32F407xx || STM32F417xx */ -/*------------------------------------------------------------------------------------------*/ - -/*---------------------------------- STM32F405xx/STM32F415xx--------------------------------*/ -#if defined (STM32F405xx) || defined (STM32F415xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF12_OTG_HS_FS) || ((AF) == GPIO_AF12_SDIO) || \ - ((AF) == GPIO_AF12_FSMC) || ((AF) == GPIO_AF15_EVENTOUT)) - -#endif /* STM32F405xx || STM32F415xx */ - -/*------------------------------------------------------------------------------------------*/ - -/*---------------------------------------- STM32F401xx--------------------------------------*/ -#if defined(STM32F401xC) || defined(STM32F401xE) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF4_I2C1) || \ - ((AF) == GPIO_AF4_I2C2) || ((AF) == GPIO_AF4_I2C3) || \ - ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF8_USART6) || ((AF) == GPIO_AF10_OTG_FS) || \ - ((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF15_EVENTOUT)) - -#endif /* STM32F401xC || STM32F401xE */ -/*------------------------------------------------------------------------------------------*/ - -/*---------------------------------------- STM32F411xx--------------------------------------*/ -#if defined(STM32F411xE) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF4_I2C1) || \ - ((AF) == GPIO_AF4_I2C2) || ((AF) == GPIO_AF4_I2C3) || \ - ((AF) == GPIO_AF5_SPI1) || ((AF) == GPIO_AF5_SPI2) || \ - ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF6_SPI4) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF6_SPI5) || ((AF) == GPIO_AF7_SPI3) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF8_USART6) || ((AF) == GPIO_AF10_OTG_FS) || \ - ((AF) == GPIO_AF9_I2C2) || ((AF) == GPIO_AF9_I2C3) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF15_EVENTOUT)) - -#endif /* STM32F411xE */ -/*----------------------------------------------------------------------------------------------------*/ - -/*----------------------------------------------- STM32F446xx ----------------------------------------*/ -#if defined(STM32F446xx) -#define IS_GPIO_AF(AF) (((AF) == GPIO_AF0_RTC_50Hz) || ((AF) == GPIO_AF9_TIM14) || \ - ((AF) == GPIO_AF0_MCO) || ((AF) == GPIO_AF0_TAMPER) || \ - ((AF) == GPIO_AF0_SWJ) || ((AF) == GPIO_AF0_TRACE) || \ - ((AF) == GPIO_AF1_TIM1) || ((AF) == GPIO_AF1_TIM2) || \ - ((AF) == GPIO_AF2_TIM3) || ((AF) == GPIO_AF2_TIM4) || \ - ((AF) == GPIO_AF2_TIM5) || ((AF) == GPIO_AF3_TIM8) || \ - ((AF) == GPIO_AF4_I2C1) || ((AF) == GPIO_AF4_I2C2) || \ - ((AF) == GPIO_AF4_I2C3) || ((AF) == GPIO_AF5_SPI1) || \ - ((AF) == GPIO_AF5_SPI2) || ((AF) == GPIO_AF9_TIM13) || \ - ((AF) == GPIO_AF6_SPI3) || ((AF) == GPIO_AF9_TIM12) || \ - ((AF) == GPIO_AF7_USART1) || ((AF) == GPIO_AF7_USART2) || \ - ((AF) == GPIO_AF7_USART3) || ((AF) == GPIO_AF8_UART4) || \ - ((AF) == GPIO_AF8_UART5) || ((AF) == GPIO_AF8_USART6) || \ - ((AF) == GPIO_AF9_CAN1) || ((AF) == GPIO_AF9_CAN2) || \ - ((AF) == GPIO_AF10_OTG_FS) || ((AF) == GPIO_AF10_OTG_HS) || \ - ((AF) == GPIO_AF11_ETH) || ((AF) == GPIO_AF12_OTG_HS_FS) || \ - ((AF) == GPIO_AF12_SDIO) || ((AF) == GPIO_AF13_DCMI) || \ - ((AF) == GPIO_AF15_EVENTOUT) || ((AF) == GPIO_AF5_SPI4) || \ - ((AF) == GPIO_AF12_FMC) || ((AF) == GPIO_AF6_SAI1) || \ - ((AF) == GPIO_AF3_CEC) || ((AF) == GPIO_AF4_CEC) || \ - ((AF) == GPIO_AF5_SPI3) || ((AF) == GPIO_AF6_SPI2) || \ - ((AF) == GPIO_AF6_SPI4) || ((AF) == GPIO_AF7_UART5) || \ - ((AF) == GPIO_AF7_SPI2) || ((AF) == GPIO_AF7_SPI3) || \ - ((AF) == GPIO_AF7_SPDIFRX) || ((AF) == GPIO_AF8_SPDIFRX) || \ - ((AF) == GPIO_AF8_SAI2) || ((AF) == GPIO_AF9_QSPI) || \ - ((AF) == GPIO_AF10_SAI2) || ((AF) == GPIO_AF10_QSPI)) - -#endif /* STM32F446xx */ - -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup GPIOEx_Private_Functions GPIO Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_GPIO_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hash.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hash.h deleted file mode 100644 index d20e20e..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hash.h +++ /dev/null @@ -1,450 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_hash.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of HASH HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_HASH_H -#define __STM32F4xx_HAL_HASH_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F415xx) || defined(STM32F417xx) || defined(STM32F437xx) || defined(STM32F439xx) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup HASH - * @brief HASH HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup HASH_Exported_Types HASH Exported Types - * @{ - */ - -/** @defgroup HASH_Exported_Types_Group1 HASH Configuration Structure definition - * @{ - */ - -typedef struct -{ - uint32_t DataType; /*!< 32-bit data, 16-bit data, 8-bit data or 1-bit string. - This parameter can be a value of @ref HASH DataType */ - - uint32_t KeySize; /*!< The key size is used only in HMAC operation */ - - uint8_t* pKey; /*!< The key is used only in HMAC operation */ -}HASH_InitTypeDef; - -/** - * @} - */ - -/** @defgroup HASH_Exported_Types_Group2 HASH State structures definition - * @{ - */ - -typedef enum -{ - HAL_HASH_STATE_RESET = 0x00, /*!< HASH not yet initialized or disabled */ - HAL_HASH_STATE_READY = 0x01, /*!< HASH initialized and ready for use */ - HAL_HASH_STATE_BUSY = 0x02, /*!< HASH internal process is ongoing */ - HAL_HASH_STATE_TIMEOUT = 0x03, /*!< HASH timeout state */ - HAL_HASH_STATE_ERROR = 0x04 /*!< HASH error state */ -}HAL_HASH_STATETypeDef; - -/** - * @} - */ - -/** @defgroup HASH_Exported_Types_Group3 HASH phase structures definition - * @{ - */ - -typedef enum -{ - HAL_HASH_PHASE_READY = 0x01, /*!< HASH peripheral is ready for initialization */ - HAL_HASH_PHASE_PROCESS = 0x02, /*!< HASH peripheral is in processing phase */ -}HAL_HASHPhaseTypeDef; - -/** - * @} - */ - -/** @defgroup HASH_Exported_Types_Group4 HASH Handle structures definition - * @{ - */ - -typedef struct -{ - HASH_InitTypeDef Init; /*!< HASH required parameters */ - - uint8_t *pHashInBuffPtr; /*!< Pointer to input buffer */ - - uint8_t *pHashOutBuffPtr; /*!< Pointer to input buffer */ - - __IO uint32_t HashBuffSize; /*!< Size of buffer to be processed */ - - __IO uint32_t HashInCount; /*!< Counter of inputed data */ - - __IO uint32_t HashITCounter; /*!< Counter of issued interrupts */ - - HAL_StatusTypeDef Status; /*!< HASH peripheral status */ - - HAL_HASHPhaseTypeDef Phase; /*!< HASH peripheral phase */ - - DMA_HandleTypeDef *hdmain; /*!< HASH In DMA handle parameters */ - - HAL_LockTypeDef Lock; /*!< HASH locking object */ - - __IO HAL_HASH_STATETypeDef State; /*!< HASH peripheral state */ -} HASH_HandleTypeDef; - -/** - * @} - */ - - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup HASH_Exported_Constants HASH Exported Constants - * @{ - */ - -/** @defgroup HASH_Exported_Constants_Group1 HASH Algorithm Selection - * @{ - */ -#define HASH_ALGOSELECTION_SHA1 ((uint32_t)0x0000) /*!< HASH function is SHA1 */ -#define HASH_ALGOSELECTION_SHA224 HASH_CR_ALGO_1 /*!< HASH function is SHA224 */ -#define HASH_ALGOSELECTION_SHA256 HASH_CR_ALGO /*!< HASH function is SHA256 */ -#define HASH_ALGOSELECTION_MD5 HASH_CR_ALGO_0 /*!< HASH function is MD5 */ -/** - * @} - */ - -/** @defgroup HASH_Exported_Constants_Group2 HASH Algorithm Mode - * @{ - */ -#define HASH_ALGOMODE_HASH ((uint32_t)0x00000000) /*!< Algorithm is HASH */ -#define HASH_ALGOMODE_HMAC HASH_CR_MODE /*!< Algorithm is HMAC */ -/** - * @} - */ - -/** @defgroup HASH_Exported_Constants_Group3 HASH DataType - * @{ - */ -#define HASH_DATATYPE_32B ((uint32_t)0x0000) /*!< 32-bit data. No swapping */ -#define HASH_DATATYPE_16B HASH_CR_DATATYPE_0 /*!< 16-bit data. Each half word is swapped */ -#define HASH_DATATYPE_8B HASH_CR_DATATYPE_1 /*!< 8-bit data. All bytes are swapped */ -#define HASH_DATATYPE_1B HASH_CR_DATATYPE /*!< 1-bit data. In the word all bits are swapped */ -/** - * @} - */ - -/** @defgroup HASH_Exported_Constants_Group4 HASH HMAC Long key - * @brief HASH HMAC Long key used only for HMAC mode - * @{ - */ -#define HASH_HMAC_KEYTYPE_SHORTKEY ((uint32_t)0x00000000) /*!< HMAC Key is <= 64 bytes */ -#define HASH_HMAC_KEYTYPE_LONGKEY HASH_CR_LKEY /*!< HMAC Key is > 64 bytes */ -/** - * @} - */ - -/** @defgroup HASH_Exported_Constants_Group5 HASH Flags definition - * @{ - */ -#define HASH_FLAG_DINIS HASH_SR_DINIS /*!< 16 locations are free in the DIN : A new block can be entered into the input buffer */ -#define HASH_FLAG_DCIS HASH_SR_DCIS /*!< Digest calculation complete */ -#define HASH_FLAG_DMAS HASH_SR_DMAS /*!< DMA interface is enabled (DMAE=1) or a transfer is ongoing */ -#define HASH_FLAG_BUSY HASH_SR_BUSY /*!< The hash core is Busy : processing a block of data */ -#define HASH_FLAG_DINNE HASH_CR_DINNE /*!< DIN not empty : The input buffer contains at least one word of data */ -/** - * @} - */ - -/** @defgroup HASH_Exported_Constants_Group6 HASH Interrupts definition - * @{ - */ -#define HASH_IT_DINI HASH_IMR_DINIE /*!< A new block can be entered into the input buffer (DIN) */ -#define HASH_IT_DCI HASH_IMR_DCIE /*!< Digest calculation complete */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup HASH_Exported_Macros HASH Exported Macros - * @{ - */ - -/** @brief Reset HASH handle state - * @param __HANDLE__: specifies the HASH handle. - * @retval None - */ -#define __HAL_HASH_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_HASH_STATE_RESET) - -/** @brief Check whether the specified HASH flag is set or not. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg HASH_FLAG_DINIS: A new block can be entered into the input buffer. - * @arg HASH_FLAG_DCIS: Digest calculation complete - * @arg HASH_FLAG_DMAS: DMA interface is enabled (DMAE=1) or a transfer is ongoing - * @arg HASH_FLAG_BUSY: The hash core is Busy : processing a block of data - * @arg HASH_FLAG_DINNE: DIN not empty : The input buffer contains at least one word of data - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_HASH_GET_FLAG(__FLAG__) (((__FLAG__) > 8U) ? ((HASH->CR & (__FLAG__)) == (__FLAG__)) :\ - ((HASH->SR & (__FLAG__)) == (__FLAG__))) -/** - * @brief Enable the multiple DMA mode. - * This feature is available only in STM32F429x and STM32F439x devices. - * @retval None - */ -#define __HAL_HASH_SET_MDMAT() HASH->CR |= HASH_CR_MDMAT - -/** - * @brief Disable the multiple DMA mode. - * @retval None - */ -#define __HAL_HASH_RESET_MDMAT() HASH->CR &= (uint32_t)(~HASH_CR_MDMAT) - -/** - * @brief Start the digest computation - * @retval None - */ -#define __HAL_HASH_START_DIGEST() HASH->STR |= HASH_STR_DCAL - -/** - * @brief Set the number of valid bits in last word written in Data register - * @param SIZE: size in byte of last data written in Data register. - * @retval None -*/ -#define __HAL_HASH_SET_NBVALIDBITS(SIZE) do{HASH->STR &= ~(HASH_STR_NBLW);\ - HASH->STR |= 8 * ((SIZE) % 4);\ - }while(0) - -/** - * @} - */ - -/* Include HASH HAL Extension module */ -#include "stm32f4xx_hal_hash_ex.h" -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup HASH_Exported_Functions HASH Exported Functions - * @{ - */ - -/** @addtogroup HASH_Exported_Functions_Group1 - * @{ - */ -HAL_StatusTypeDef HAL_HASH_Init(HASH_HandleTypeDef *hhash); -HAL_StatusTypeDef HAL_HASH_DeInit(HASH_HandleTypeDef *hhash); -/** - * @} - */ - -/** @addtogroup HASH_Exported_Functions_Group2 - * @{ - */ -HAL_StatusTypeDef HAL_HASH_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout); -HAL_StatusTypeDef HAL_HASH_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout); -HAL_StatusTypeDef HAL_HASH_MD5_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HASH_SHA1_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -/** - * @} - */ - -/** @addtogroup HASH_Exported_Functions_Group3 - * @{ - */ -HAL_StatusTypeDef HAL_HMAC_SHA1_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout); -HAL_StatusTypeDef HAL_HMAC_MD5_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout); -/** - * @} - */ - -/** @addtogroup HASH_Exported_Functions_Group4 - * @{ - */ -HAL_StatusTypeDef HAL_HASH_SHA1_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer); -HAL_StatusTypeDef HAL_HASH_MD5_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer); -/** - * @} - */ - -/** @addtogroup HASH_Exported_Functions_Group5 - * @{ - */ -HAL_StatusTypeDef HAL_HASH_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HASH_SHA1_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout); -HAL_StatusTypeDef HAL_HASH_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HASH_MD5_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout); -/** - * @} - */ - -/** @addtogroup HASH_Exported_Functions_Group6 - * @{ - */ -HAL_StatusTypeDef HAL_HMAC_SHA1_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HMAC_MD5_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -/** - * @} - */ - -/** @addtogroup HASH_Exported_Functions_Group7 - * @{ - */ -void HAL_HASH_IRQHandler(HASH_HandleTypeDef *hhash); -/** - * @} - */ - -/** @addtogroup HASH_Exported_Functions_Group8 - * @{ - */ -HAL_HASH_STATETypeDef HAL_HASH_GetState(HASH_HandleTypeDef *hhash); -void HAL_HASH_MspInit(HASH_HandleTypeDef *hhash); -void HAL_HASH_MspDeInit(HASH_HandleTypeDef *hhash); -void HAL_HASH_InCpltCallback(HASH_HandleTypeDef *hhash); -void HAL_HASH_DgstCpltCallback(HASH_HandleTypeDef *hhash); -void HAL_HASH_ErrorCallback(HASH_HandleTypeDef *hhash); -/** - * @} - */ - - /** - * @} - */ - - /* Private types -------------------------------------------------------------*/ -/** @defgroup HASH_Private_Types HASH Private Types - * @{ - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup HASH_Private_Variables HASH Private Variables - * @{ - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup HASH_Private_Constants HASH Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup HASH_Private_Macros HASH Private Macros - * @{ - */ -#define IS_HASH_ALGOSELECTION(__ALGOSELECTION__) (((__ALGOSELECTION__) == HASH_ALGOSELECTION_SHA1) || \ - ((__ALGOSELECTION__) == HASH_ALGOSELECTION_SHA224) || \ - ((__ALGOSELECTION__) == HASH_ALGOSELECTION_SHA256) || \ - ((__ALGOSELECTION__) == HASH_ALGOSELECTION_MD5)) - - -#define IS_HASH_ALGOMODE(__ALGOMODE__) (((__ALGOMODE__) == HASH_ALGOMODE_HASH) || \ - ((__ALGOMODE__) == HASH_ALGOMODE_HMAC)) - - -#define IS_HASH_DATATYPE(__DATATYPE__) (((__DATATYPE__) == HASH_DATATYPE_32B)|| \ - ((__DATATYPE__) == HASH_DATATYPE_16B)|| \ - ((__DATATYPE__) == HASH_DATATYPE_8B) || \ - ((__DATATYPE__) == HASH_DATATYPE_1B)) - - -#define IS_HASH_HMAC_KEYTYPE(__KEYTYPE__) (((__KEYTYPE__) == HASH_HMAC_KEYTYPE_SHORTKEY) || \ - ((__KEYTYPE__) == HASH_HMAC_KEYTYPE_LONGKEY)) - -#define IS_HASH_SHA1_BUFFER_SIZE(__SIZE__) ((((__SIZE__)%4) != 0)? 0U: 1U) - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup HASH_Private_Functions HASH Private Functions - * @{ - */ - -/** - * @} - */ - -#endif /* STM32F415xx || STM32F417xx || STM32F437xx || STM32F439xx */ -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_HAL_HASH_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hash_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hash_ex.h deleted file mode 100644 index da47cc5..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hash_ex.h +++ /dev/null @@ -1,200 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_hash_ex.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of HASH HAL Extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_HASH_EX_H -#define __STM32F4xx_HAL_HASH_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F437xx) || defined(STM32F439xx) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup HASHEx - * @brief HASHEx HAL Extension module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ - -/** @defgroup HASHEx_Exported_Functions HASHEx Exported Functions - * @{ - */ - -/** @defgroup HASHEx_Exported_Functions_Group1 HASHEx processing using polling functions - * @{ - */ - -HAL_StatusTypeDef HAL_HASHEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout); -HAL_StatusTypeDef HAL_HASHEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout); -HAL_StatusTypeDef HAL_HASHEx_SHA224_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HASHEx_SHA256_Accumulate(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); - -/** - * @} - */ - -/** @defgroup HASHEx_Exported_Functions_Group2 HMAC processing using polling functions - * @{ - */ - -HAL_StatusTypeDef HAL_HMACEx_SHA224_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout); -HAL_StatusTypeDef HAL_HMACEx_SHA256_Start(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer, uint32_t Timeout); - -/** - * @} - */ - -/** @defgroup HASHEx_Exported_Functions_Group3 HASHEx processing using functions - * @{ - */ - -HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer); -HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_IT(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size, uint8_t* pOutBuffer); - -/** - * @} - */ - -/** @defgroup HASHEx_Exported_Functions_Group4 HASHEx processing using DMA - * @{ - */ - -HAL_StatusTypeDef HAL_HASHEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HASHEx_SHA224_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout); -HAL_StatusTypeDef HAL_HASHEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HASHEx_SHA256_Finish(HASH_HandleTypeDef *hhash, uint8_t* pOutBuffer, uint32_t Timeout); - -/** - * @} - */ - -/** @defgroup HASHEx_Exported_Functions_Group5 HMAC processing using DMA - * @{ - */ - -HAL_StatusTypeDef HAL_HMACEx_SHA224_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -HAL_StatusTypeDef HAL_HMACEx_SHA256_Start_DMA(HASH_HandleTypeDef *hhash, uint8_t *pInBuffer, uint32_t Size); -/** - * @} - */ - -/** @defgroup HASHEx_Exported_Functions_Group6 HASHEx processing functions - * @{ - */ - -void HAL_HASHEx_IRQHandler(HASH_HandleTypeDef *hhash); - -/** - * @} - */ - -/** - * @} - */ - - /* Private types -------------------------------------------------------------*/ -/** @defgroup HASHEx_Private_Types HASHEx Private Types - * @{ - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup HASHEx_Private_Variables HASHEx Private Variables - * @{ - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup HASHEx_Private_Constants HASHEx Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup HASHEx_Private_Macros HASHEx Private Macros - * @{ - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup HASHEx_Private_Functions HASHEx Private Functions - * @{ - */ - -/** - * @} - */ - -#endif /* STM32F437xx || STM32F439xx */ -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_HASH_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hcd.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hcd.h deleted file mode 100644 index 3d02f79..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_hcd.h +++ /dev/null @@ -1,269 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_hcd.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of HCD HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_HCD_H -#define __STM32F4xx_HAL_HCD_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_usb.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup HCD - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup HCD_Exported_Types HCD Exported Types - * @{ - */ - -/** @defgroup HCD_Exported_Types_Group1 HCD State Structure definition - * @{ - */ -typedef enum -{ - HAL_HCD_STATE_RESET = 0x00, - HAL_HCD_STATE_READY = 0x01, - HAL_HCD_STATE_ERROR = 0x02, - HAL_HCD_STATE_BUSY = 0x03, - HAL_HCD_STATE_TIMEOUT = 0x04 -} HCD_StateTypeDef; - -typedef USB_OTG_GlobalTypeDef HCD_TypeDef; -typedef USB_OTG_CfgTypeDef HCD_InitTypeDef; -typedef USB_OTG_HCTypeDef HCD_HCTypeDef ; -typedef USB_OTG_URBStateTypeDef HCD_URBStateTypeDef ; -typedef USB_OTG_HCStateTypeDef HCD_HCStateTypeDef ; -/** - * @} - */ - -/** @defgroup HCD_Exported_Types_Group2 HCD Handle Structure definition - * @{ - */ -typedef struct -{ - HCD_TypeDef *Instance; /*!< Register base address */ - HCD_InitTypeDef Init; /*!< HCD required parameters */ - HCD_HCTypeDef hc[15]; /*!< Host channels parameters */ - HAL_LockTypeDef Lock; /*!< HCD peripheral status */ - __IO HCD_StateTypeDef State; /*!< HCD communication state */ - void *pData; /*!< Pointer Stack Handler */ -} HCD_HandleTypeDef; -/** - * @} - */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup HCD_Exported_Constants HCD Exported Constants - * @{ - */ - -/** @defgroup HCD_Speed HCD Speed - * @{ - */ -#define HCD_SPEED_HIGH 0 -#define HCD_SPEED_LOW 2 -#define HCD_SPEED_FULL 3 -/** - * @} - */ - -/** @defgroup HCD_PHY_Module HCD PHY Module - * @{ - */ -#define HCD_PHY_ULPI 1 -#define HCD_PHY_EMBEDDED 2 -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup HCD_Exported_Macros HCD Exported Macros - * @brief macros to handle interrupts and specific clock configurations - * @{ - */ -#define __HAL_HCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance) -#define __HAL_HCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance) - -#define __HAL_HCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) -#define __HAL_HCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__)) -#define __HAL_HCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0) - -#define __HAL_HCD_CLEAR_HC_INT(chnum, __INTERRUPT__) (USBx_HC(chnum)->HCINT = (__INTERRUPT__)) -#define __HAL_HCD_MASK_HALT_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_CHHM) -#define __HAL_HCD_UNMASK_HALT_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_CHHM) -#define __HAL_HCD_MASK_ACK_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK &= ~USB_OTG_HCINTMSK_ACKM) -#define __HAL_HCD_UNMASK_ACK_HC_INT(chnum) (USBx_HC(chnum)->HCINTMSK |= USB_OTG_HCINTMSK_ACKM) -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup HCD_Exported_Functions HCD Exported Functions - * @{ - */ - -/* Initialization/de-initialization functions ********************************/ -/** @addtogroup HCD_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ -HAL_StatusTypeDef HAL_HCD_Init(HCD_HandleTypeDef *hhcd); -HAL_StatusTypeDef HAL_HCD_DeInit(HCD_HandleTypeDef *hhcd); -HAL_StatusTypeDef HAL_HCD_HC_Init(HCD_HandleTypeDef *hhcd, - uint8_t ch_num, - uint8_t epnum, - uint8_t dev_address, - uint8_t speed, - uint8_t ep_type, - uint16_t mps); - -HAL_StatusTypeDef HAL_HCD_HC_Halt(HCD_HandleTypeDef *hhcd, uint8_t ch_num); - -void HAL_HCD_MspInit(HCD_HandleTypeDef *hhcd); -void HAL_HCD_MspDeInit(HCD_HandleTypeDef *hhcd); -/** - * @} - */ - -/* I/O operation functions ***************************************************/ -/** @addtogroup HCD_Exported_Functions_Group2 IO operation functions - * @{ - */ -HAL_StatusTypeDef HAL_HCD_HC_SubmitRequest(HCD_HandleTypeDef *hhcd, - uint8_t pipe, - uint8_t direction, - uint8_t ep_type, - uint8_t token, - uint8_t* pbuff, - uint16_t length, - uint8_t do_ping); - -/* Non-Blocking mode: Interrupt */ -void HAL_HCD_IRQHandler(HCD_HandleTypeDef *hhcd); -void HAL_HCD_SOF_Callback(HCD_HandleTypeDef *hhcd); -void HAL_HCD_Connect_Callback(HCD_HandleTypeDef *hhcd); -void HAL_HCD_Disconnect_Callback(HCD_HandleTypeDef *hhcd); -void HAL_HCD_HC_NotifyURBChange_Callback(HCD_HandleTypeDef *hhcd, - uint8_t chnum, - HCD_URBStateTypeDef urb_state); -/** - * @} - */ - -/* Peripheral Control functions **********************************************/ -/** @addtogroup HCD_Exported_Functions_Group3 Peripheral Control functions - * @{ - */ -HAL_StatusTypeDef HAL_HCD_ResetPort(HCD_HandleTypeDef *hhcd); -HAL_StatusTypeDef HAL_HCD_Start(HCD_HandleTypeDef *hhcd); -HAL_StatusTypeDef HAL_HCD_Stop(HCD_HandleTypeDef *hhcd); -/** - * @} - */ - -/* Peripheral State functions ************************************************/ -/** @addtogroup HCD_Exported_Functions_Group4 Peripheral State functions - * @{ - */ -HCD_StateTypeDef HAL_HCD_GetState(HCD_HandleTypeDef *hhcd); -HCD_URBStateTypeDef HAL_HCD_HC_GetURBState(HCD_HandleTypeDef *hhcd, uint8_t chnum); -uint32_t HAL_HCD_HC_GetXferCount(HCD_HandleTypeDef *hhcd, uint8_t chnum); -HCD_HCStateTypeDef HAL_HCD_HC_GetState(HCD_HandleTypeDef *hhcd, uint8_t chnum); -uint32_t HAL_HCD_GetCurrentFrame(HCD_HandleTypeDef *hhcd); -uint32_t HAL_HCD_GetCurrentSpeed(HCD_HandleTypeDef *hhcd); -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup HCD_Private_Macros HCD Private Macros - * @{ - */ -/** @defgroup HCD_Instance_definition HCD Instance definition - * @{ - */ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) ||\ - defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) - #define IS_HCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS) || \ - ((INSTANCE) == USB_OTG_HS)) -#elif defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) - #define IS_HCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS)) -#endif -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_HCD_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h deleted file mode 100644 index efe0041..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c.h +++ /dev/null @@ -1,535 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_i2c.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of I2C HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_I2C_H -#define __STM32F4xx_HAL_I2C_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup I2C - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup I2C_Exported_Types I2C Exported Types - * @{ - */ - -/** - * @brief I2C Configuration Structure definition - */ -typedef struct -{ - uint32_t ClockSpeed; /*!< Specifies the clock frequency. - This parameter must be set to a value lower than 400kHz */ - - uint32_t DutyCycle; /*!< Specifies the I2C fast mode duty cycle. - This parameter can be a value of @ref I2C_duty_cycle_in_fast_mode */ - - uint32_t OwnAddress1; /*!< Specifies the first device own address. - This parameter can be a 7-bit or 10-bit address. */ - - uint32_t AddressingMode; /*!< Specifies if 7-bit or 10-bit addressing mode is selected. - This parameter can be a value of @ref I2C_addressing_mode */ - - uint32_t DualAddressMode; /*!< Specifies if dual addressing mode is selected. - This parameter can be a value of @ref I2C_dual_addressing_mode */ - - uint32_t OwnAddress2; /*!< Specifies the second device own address if dual addressing mode is selected - This parameter can be a 7-bit address. */ - - uint32_t GeneralCallMode; /*!< Specifies if general call mode is selected. - This parameter can be a value of @ref I2C_general_call_addressing_mode */ - - uint32_t NoStretchMode; /*!< Specifies if nostretch mode is selected. - This parameter can be a value of @ref I2C_nostretch_mode */ - -}I2C_InitTypeDef; - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_I2C_STATE_RESET = 0x00, /*!< I2C not yet initialized or disabled */ - HAL_I2C_STATE_READY = 0x01, /*!< I2C initialized and ready for use */ - HAL_I2C_STATE_BUSY = 0x02, /*!< I2C internal process is ongoing */ - HAL_I2C_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ - HAL_I2C_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ - HAL_I2C_STATE_MEM_BUSY_TX = 0x32, /*!< Memory Data Transmission process is ongoing */ - HAL_I2C_STATE_MEM_BUSY_RX = 0x42, /*!< Memory Data Reception process is ongoing */ - HAL_I2C_STATE_TIMEOUT = 0x03, /*!< I2C timeout state */ - HAL_I2C_STATE_ERROR = 0x04 /*!< I2C error state */ - -}HAL_I2C_StateTypeDef; - -/** - * @brief I2C handle Structure definition - */ -typedef struct -{ - I2C_TypeDef *Instance; /*!< I2C registers base address */ - - I2C_InitTypeDef Init; /*!< I2C communication parameters */ - - uint8_t *pBuffPtr; /*!< Pointer to I2C transfer buffer */ - - uint16_t XferSize; /*!< I2C transfer size */ - - __IO uint16_t XferCount; /*!< I2C transfer counter */ - - DMA_HandleTypeDef *hdmatx; /*!< I2C Tx DMA handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< I2C Rx DMA handle parameters */ - - HAL_LockTypeDef Lock; /*!< I2C locking object */ - - __IO HAL_I2C_StateTypeDef State; /*!< I2C communication state */ - - __IO uint32_t ErrorCode; /*!< I2C Error code */ - -}I2C_HandleTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup I2C_Exported_Constants I2C Exported Constants - * @{ - */ - -/** @defgroup I2C_Error_Code I2C Error Code - * @brief I2C Error Code - * @{ - */ -#define HAL_I2C_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ -#define HAL_I2C_ERROR_BERR ((uint32_t)0x00000001) /*!< BERR error */ -#define HAL_I2C_ERROR_ARLO ((uint32_t)0x00000002) /*!< ARLO error */ -#define HAL_I2C_ERROR_AF ((uint32_t)0x00000004) /*!< AF error */ -#define HAL_I2C_ERROR_OVR ((uint32_t)0x00000008) /*!< OVR error */ -#define HAL_I2C_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */ -#define HAL_I2C_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< Timeout Error */ -/** - * @} - */ - -/** @defgroup I2C_duty_cycle_in_fast_mode I2C duty cycle in fast mode - * @{ - */ -#define I2C_DUTYCYCLE_2 ((uint32_t)0x00000000) -#define I2C_DUTYCYCLE_16_9 I2C_CCR_DUTY -/** - * @} - */ - -/** @defgroup I2C_addressing_mode I2C addressing mode - * @{ - */ -#define I2C_ADDRESSINGMODE_7BIT ((uint32_t)0x00004000) -#define I2C_ADDRESSINGMODE_10BIT (I2C_OAR1_ADDMODE | ((uint32_t)0x00004000)) -/** - * @} - */ - -/** @defgroup I2C_dual_addressing_mode I2C dual addressing mode - * @{ - */ -#define I2C_DUALADDRESS_DISABLE ((uint32_t)0x00000000) -#define I2C_DUALADDRESS_ENABLE I2C_OAR2_ENDUAL -/** - * @} - */ - -/** @defgroup I2C_general_call_addressing_mode I2C general call addressing mode - * @{ - */ -#define I2C_GENERALCALL_DISABLE ((uint32_t)0x00000000) -#define I2C_GENERALCALL_ENABLE I2C_CR1_ENGC -/** - * @} - */ - -/** @defgroup I2C_nostretch_mode I2C nostretch mode - * @{ - */ -#define I2C_NOSTRETCH_DISABLE ((uint32_t)0x00000000) -#define I2C_NOSTRETCH_ENABLE I2C_CR1_NOSTRETCH -/** - * @} - */ - -/** @defgroup I2C_Memory_Address_Size I2C Memory Address Size - * @{ - */ -#define I2C_MEMADD_SIZE_8BIT ((uint32_t)0x00000001) -#define I2C_MEMADD_SIZE_16BIT ((uint32_t)0x00000010) -/** - * @} - */ - -/** @defgroup I2C_Interrupt_configuration_definition I2C Interrupt configuration definition - * @{ - */ -#define I2C_IT_BUF I2C_CR2_ITBUFEN -#define I2C_IT_EVT I2C_CR2_ITEVTEN -#define I2C_IT_ERR I2C_CR2_ITERREN -/** - * @} - */ - -/** @defgroup I2C_Flag_definition I2C Flag definition - * @{ - */ -#define I2C_FLAG_SMBALERT ((uint32_t)0x00018000) -#define I2C_FLAG_TIMEOUT ((uint32_t)0x00014000) -#define I2C_FLAG_PECERR ((uint32_t)0x00011000) -#define I2C_FLAG_OVR ((uint32_t)0x00010800) -#define I2C_FLAG_AF ((uint32_t)0x00010400) -#define I2C_FLAG_ARLO ((uint32_t)0x00010200) -#define I2C_FLAG_BERR ((uint32_t)0x00010100) -#define I2C_FLAG_TXE ((uint32_t)0x00010080) -#define I2C_FLAG_RXNE ((uint32_t)0x00010040) -#define I2C_FLAG_STOPF ((uint32_t)0x00010010) -#define I2C_FLAG_ADD10 ((uint32_t)0x00010008) -#define I2C_FLAG_BTF ((uint32_t)0x00010004) -#define I2C_FLAG_ADDR ((uint32_t)0x00010002) -#define I2C_FLAG_SB ((uint32_t)0x00010001) -#define I2C_FLAG_DUALF ((uint32_t)0x00100080) -#define I2C_FLAG_SMBHOST ((uint32_t)0x00100040) -#define I2C_FLAG_SMBDEFAULT ((uint32_t)0x00100020) -#define I2C_FLAG_GENCALL ((uint32_t)0x00100010) -#define I2C_FLAG_TRA ((uint32_t)0x00100004) -#define I2C_FLAG_BUSY ((uint32_t)0x00100002) -#define I2C_FLAG_MSL ((uint32_t)0x00100001) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup I2C_Exported_Macros I2C Exported Macros - * @{ - */ - -/** @brief Reset I2C handle state - * @param __HANDLE__: specifies the I2C Handle. - * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral. - * @retval None - */ -#define __HAL_I2C_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2C_STATE_RESET) - -/** @brief Enable or disable the specified I2C interrupts. - * @param __HANDLE__: specifies the I2C Handle. - * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral. - * @param __INTERRUPT__: specifies the interrupt source to enable or disable. - * This parameter can be one of the following values: - * @arg I2C_IT_BUF: Buffer interrupt enable - * @arg I2C_IT_EVT: Event interrupt enable - * @arg I2C_IT_ERR: Error interrupt enable - * @retval None - */ -#define __HAL_I2C_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__)) -#define __HAL_I2C_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__))) - -/** @brief Checks if the specified I2C interrupt source is enabled or disabled. - * @param __HANDLE__: specifies the I2C Handle. - * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral. - * @param __INTERRUPT__: specifies the I2C interrupt source to check. - * This parameter can be one of the following values: - * @arg I2C_IT_BUF: Buffer interrupt enable - * @arg I2C_IT_EVT: Event interrupt enable - * @arg I2C_IT_ERR: Error interrupt enable - * @retval The new state of __INTERRUPT__ (TRUE or FALSE). - */ -#define __HAL_I2C_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Checks whether the specified I2C flag is set or not. - * @param __HANDLE__: specifies the I2C Handle. - * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg I2C_FLAG_SMBALERT: SMBus Alert flag - * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag - * @arg I2C_FLAG_PECERR: PEC error in reception flag - * @arg I2C_FLAG_OVR: Overrun/Underrun flag - * @arg I2C_FLAG_AF: Acknowledge failure flag - * @arg I2C_FLAG_ARLO: Arbitration lost flag - * @arg I2C_FLAG_BERR: Bus error flag - * @arg I2C_FLAG_TXE: Data register empty flag - * @arg I2C_FLAG_RXNE: Data register not empty flag - * @arg I2C_FLAG_STOPF: Stop detection flag - * @arg I2C_FLAG_ADD10: 10-bit header sent flag - * @arg I2C_FLAG_BTF: Byte transfer finished flag - * @arg I2C_FLAG_ADDR: Address sent flag - * Address matched flag - * @arg I2C_FLAG_SB: Start bit flag - * @arg I2C_FLAG_DUALF: Dual flag - * @arg I2C_FLAG_SMBHOST: SMBus host header - * @arg I2C_FLAG_SMBDEFAULT: SMBus default header - * @arg I2C_FLAG_GENCALL: General call header flag - * @arg I2C_FLAG_TRA: Transmitter/Receiver flag - * @arg I2C_FLAG_BUSY: Bus busy flag - * @arg I2C_FLAG_MSL: Master/Slave flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_I2C_GET_FLAG(__HANDLE__, __FLAG__) ((((uint8_t)((__FLAG__) >> 16)) == 0x01)?((((__HANDLE__)->Instance->SR1) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK)): \ - ((((__HANDLE__)->Instance->SR2) & ((__FLAG__) & I2C_FLAG_MASK)) == ((__FLAG__) & I2C_FLAG_MASK))) - -/** @brief Clears the I2C pending flags which are cleared by writing 0 in a specific bit. - * @param __HANDLE__: specifies the I2C Handle. - * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral. - * @param __FLAG__: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg I2C_FLAG_SMBALERT: SMBus Alert flag - * @arg I2C_FLAG_TIMEOUT: Timeout or Tlow error flag - * @arg I2C_FLAG_PECERR: PEC error in reception flag - * @arg I2C_FLAG_OVR: Overrun/Underrun flag (Slave mode) - * @arg I2C_FLAG_AF: Acknowledge failure flag - * @arg I2C_FLAG_ARLO: Arbitration lost flag (Master mode) - * @arg I2C_FLAG_BERR: Bus error flag - * @retval None - */ -#define __HAL_I2C_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR1 = ~((__FLAG__) & I2C_FLAG_MASK)) - -/** @brief Clears the I2C ADDR pending flag. - * @param __HANDLE__: specifies the I2C Handle. - * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral. - * @retval None - */ -#define __HAL_I2C_CLEAR_ADDRFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg; \ - tmpreg = (__HANDLE__)->Instance->SR1; \ - tmpreg = (__HANDLE__)->Instance->SR2; \ - UNUSED(tmpreg); \ - } while(0) - -/** @brief Clears the I2C STOPF pending flag. - * @param __HANDLE__: specifies the I2C Handle. - * This parameter can be I2C where x: 1, 2, or 3 to select the I2C peripheral. - * @retval None - */ -#define __HAL_I2C_CLEAR_STOPFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg; \ - tmpreg = (__HANDLE__)->Instance->SR1; \ - (__HANDLE__)->Instance->CR1 |= I2C_CR1_PE; \ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_I2C_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= I2C_CR1_PE) -#define __HAL_I2C_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~I2C_CR1_PE) - -/** - * @} - */ - -/* Include I2C HAL Extension module */ -#include "stm32f4xx_hal_i2c_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup I2C_Exported_Functions - * @{ - */ - -/** @addtogroup I2C_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions **********************************/ -HAL_StatusTypeDef HAL_I2C_Init(I2C_HandleTypeDef *hi2c); -HAL_StatusTypeDef HAL_I2C_DeInit (I2C_HandleTypeDef *hi2c); -void HAL_I2C_MspInit(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MspDeInit(I2C_HandleTypeDef *hi2c); -/** - * @} - */ - -/** @addtogroup I2C_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions *****************************************************/ -/******* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Master_Receive(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Slave_Transmit(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Slave_Receive(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Mem_Write(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_Mem_Read(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2C_IsDeviceReady(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint32_t Trials, uint32_t Timeout); - -/******* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Master_Receive_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Receive_IT(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Write_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Read_IT(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); - -/******* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_I2C_Master_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Master_Receive_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Transmit_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Slave_Receive_DMA(I2C_HandleTypeDef *hi2c, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Write_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2C_Mem_Read_DMA(I2C_HandleTypeDef *hi2c, uint16_t DevAddress, uint16_t MemAddress, uint16_t MemAddSize, uint8_t *pData, uint16_t Size); - -/******* I2C IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ -void HAL_I2C_EV_IRQHandler(I2C_HandleTypeDef *hi2c); -void HAL_I2C_ER_IRQHandler(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MasterTxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MasterRxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_SlaveTxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_SlaveRxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MemTxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_MemRxCpltCallback(I2C_HandleTypeDef *hi2c); -void HAL_I2C_ErrorCallback(I2C_HandleTypeDef *hi2c); -/** - * @} - */ - -/** @addtogroup I2C_Exported_Functions_Group3 - * @{ - */ -/* Peripheral Control and State functions **************************************/ -HAL_I2C_StateTypeDef HAL_I2C_GetState(I2C_HandleTypeDef *hi2c); -uint32_t HAL_I2C_GetError(I2C_HandleTypeDef *hi2c); - -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup I2C_Private_Constants I2C Private Constants - * @{ - */ -#define I2C_FLAG_MASK ((uint32_t)0x0000FFFF) -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup I2C_Private_Macros I2C Private Macros - * @{ - */ - -#define I2C_FREQRANGE(__PCLK__) ((__PCLK__)/1000000) -#define I2C_RISE_TIME(__FREQRANGE__, __SPEED__) (((__SPEED__) <= 100000) ? ((__FREQRANGE__) + 1) : ((((__FREQRANGE__) * 300) / 1000) + 1)) -#define I2C_SPEED_STANDARD(__PCLK__, __SPEED__) (((((__PCLK__)/((__SPEED__) << 1)) & I2C_CCR_CCR) < 4)? 4:((__PCLK__) / ((__SPEED__) << 1))) -#define I2C_SPEED_FAST(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__DUTYCYCLE__) == I2C_DUTYCYCLE_2)? ((__PCLK__) / ((__SPEED__) * 3)) : (((__PCLK__) / ((__SPEED__) * 25)) | I2C_DUTYCYCLE_16_9)) -#define I2C_SPEED(__PCLK__, __SPEED__, __DUTYCYCLE__) (((__SPEED__) <= 100000)? (I2C_SPEED_STANDARD((__PCLK__), (__SPEED__))) : \ - ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__)) & I2C_CCR_CCR) == 0)? 1 : \ - ((I2C_SPEED_FAST((__PCLK__), (__SPEED__), (__DUTYCYCLE__))) | I2C_CCR_FS)) - -#define I2C_7BIT_ADD_WRITE(__ADDRESS__) ((uint8_t)((__ADDRESS__) & (~I2C_OAR1_ADD0))) -#define I2C_7BIT_ADD_READ(__ADDRESS__) ((uint8_t)((__ADDRESS__) | I2C_OAR1_ADD0)) - -#define I2C_10BIT_ADDRESS(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF)))) -#define I2C_10BIT_HEADER_WRITE(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300))) >> 7) | (uint16_t)(0xF0)))) -#define I2C_10BIT_HEADER_READ(__ADDRESS__) ((uint8_t)((uint16_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0x0300))) >> 7) | (uint16_t)(0xF1)))) - -#define I2C_MEM_ADD_MSB(__ADDRESS__) ((uint8_t)((uint16_t)(((uint16_t)((__ADDRESS__) & (uint16_t)(0xFF00))) >> 8))) -#define I2C_MEM_ADD_LSB(__ADDRESS__) ((uint8_t)((uint16_t)((__ADDRESS__) & (uint16_t)(0x00FF)))) - -/** @defgroup I2C_IS_RTC_Definitions I2C Private macros to check input parameters - * @{ - */ -#define IS_I2C_DUTY_CYCLE(CYCLE) (((CYCLE) == I2C_DUTYCYCLE_2) || \ - ((CYCLE) == I2C_DUTYCYCLE_16_9)) -#define IS_I2C_ADDRESSING_MODE(ADDRESS) (((ADDRESS) == I2C_ADDRESSINGMODE_7BIT) || \ - ((ADDRESS) == I2C_ADDRESSINGMODE_10BIT)) -#define IS_I2C_DUAL_ADDRESS(ADDRESS) (((ADDRESS) == I2C_DUALADDRESS_DISABLE) || \ - ((ADDRESS) == I2C_DUALADDRESS_ENABLE)) -#define IS_I2C_GENERAL_CALL(CALL) (((CALL) == I2C_GENERALCALL_DISABLE) || \ - ((CALL) == I2C_GENERALCALL_ENABLE)) -#define IS_I2C_NO_STRETCH(STRETCH) (((STRETCH) == I2C_NOSTRETCH_DISABLE) || \ - ((STRETCH) == I2C_NOSTRETCH_ENABLE)) -#define IS_I2C_MEMADD_SIZE(SIZE) (((SIZE) == I2C_MEMADD_SIZE_8BIT) || \ - ((SIZE) == I2C_MEMADD_SIZE_16BIT)) -#define IS_I2C_CLOCK_SPEED(SPEED) (((SPEED) > 0) && ((SPEED) <= 400000)) -#define IS_I2C_OWN_ADDRESS1(ADDRESS1) (((ADDRESS1) & (uint32_t)(0xFFFFFC00)) == 0) -#define IS_I2C_OWN_ADDRESS2(ADDRESS2) (((ADDRESS2) & (uint32_t)(0xFFFFFF01)) == 0) -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup I2C_Private_Functions I2C Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_HAL_I2C_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h deleted file mode 100644 index a67e4b7..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2c_ex.h +++ /dev/null @@ -1,136 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_i2c_ex.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of I2C HAL Extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_I2C_EX_H -#define __STM32F4xx_HAL_I2C_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup I2CEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup I2CEx_Exported_Constants I2C Exported Constants - * @{ - */ - -/** @defgroup I2CEx_Analog_Filter I2C Analog Filter - * @{ - */ -#define I2C_ANALOGFILTER_ENABLE ((uint32_t)0x00000000) -#define I2C_ANALOGFILTER_DISABLE I2C_FLTR_ANOFF -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup I2CEx_Exported_Functions - * @{ - */ - -/** @addtogroup I2CEx_Exported_Functions_Group1 - * @{ - */ -/* Peripheral Control functions ************************************************/ -HAL_StatusTypeDef HAL_I2CEx_ConfigAnalogFilter(I2C_HandleTypeDef *hi2c, uint32_t AnalogFilter); -HAL_StatusTypeDef HAL_I2CEx_ConfigDigitalFilter(I2C_HandleTypeDef *hi2c, uint32_t DigitalFilter); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup I2CEx_Private_Constants I2C Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup I2CEx_Private_Macros I2C Private Macros - * @{ - */ -#define IS_I2C_ANALOG_FILTER(FILTER) (((FILTER) == I2C_ANALOGFILTER_ENABLE) || \ - ((FILTER) == I2C_ANALOGFILTER_DISABLE)) -#define IS_I2C_DIGITAL_FILTER(FILTER) ((FILTER) <= 0x0000000F) -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32F427xx || STM32F429xx || STM32F437xx || STM32F439xx || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_I2C_EX_H */ - - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s.h deleted file mode 100644 index b045de3..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s.h +++ /dev/null @@ -1,511 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_i2s.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of I2S HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_I2S_H -#define __STM32F4xx_HAL_I2S_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup I2S - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup I2S_Exported_Types I2S Exported Types - * @{ - */ - -/** - * @brief I2S Init structure definition - */ -typedef struct -{ - uint32_t Mode; /*!< Specifies the I2S operating mode. - This parameter can be a value of @ref I2S_Mode */ - - uint32_t Standard; /*!< Specifies the standard used for the I2S communication. - This parameter can be a value of @ref I2S_Standard */ - - uint32_t DataFormat; /*!< Specifies the data format for the I2S communication. - This parameter can be a value of @ref I2S_Data_Format */ - - uint32_t MCLKOutput; /*!< Specifies whether the I2S MCLK output is enabled or not. - This parameter can be a value of @ref I2S_MCLK_Output */ - - uint32_t AudioFreq; /*!< Specifies the frequency selected for the I2S communication. - This parameter can be a value of @ref I2S_Audio_Frequency */ - - uint32_t CPOL; /*!< Specifies the idle state of the I2S clock. - This parameter can be a value of @ref I2S_Clock_Polarity */ - - uint32_t ClockSource; /*!< Specifies the I2S Clock Source. - This parameter can be a value of @ref I2S_Clock_Source */ - - uint32_t FullDuplexMode; /*!< Specifies the I2S FullDuplex mode. - This parameter can be a value of @ref I2S_FullDuplex_Mode */ - -}I2S_InitTypeDef; - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_I2S_STATE_RESET = 0x00, /*!< I2S not yet initialized or disabled */ - HAL_I2S_STATE_READY = 0x01, /*!< I2S initialized and ready for use */ - HAL_I2S_STATE_BUSY = 0x02, /*!< I2S internal process is ongoing */ - HAL_I2S_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ - HAL_I2S_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ - HAL_I2S_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ - HAL_I2S_STATE_TIMEOUT = 0x03, /*!< I2S timeout state */ - HAL_I2S_STATE_ERROR = 0x04 /*!< I2S error state */ - -}HAL_I2S_StateTypeDef; - -/** - * @brief I2S handle Structure definition - */ -typedef struct -{ - SPI_TypeDef *Instance; /* I2S registers base address */ - - I2S_InitTypeDef Init; /* I2S communication parameters */ - - uint16_t *pTxBuffPtr; /* Pointer to I2S Tx transfer buffer */ - - __IO uint16_t TxXferSize; /* I2S Tx transfer size */ - - __IO uint16_t TxXferCount; /* I2S Tx transfer Counter */ - - uint16_t *pRxBuffPtr; /* Pointer to I2S Rx transfer buffer */ - - __IO uint16_t RxXferSize; /* I2S Rx transfer size */ - - __IO uint16_t RxXferCount; /* I2S Rx transfer counter */ - - DMA_HandleTypeDef *hdmatx; /* I2S Tx DMA handle parameters */ - - DMA_HandleTypeDef *hdmarx; /* I2S Rx DMA handle parameters */ - - __IO HAL_LockTypeDef Lock; /* I2S locking object */ - - __IO HAL_I2S_StateTypeDef State; /* I2S communication state */ - - __IO uint32_t ErrorCode; /* I2S Error code */ - -}I2S_HandleTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup I2S_Exported_Constants I2S Exported Constants - * @{ - */ - -/** @defgroup I2S_Error_Code I2S Error Code - * @brief I2S Error Code - * @{ - */ -#define HAL_I2S_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ -#define HAL_I2S_ERROR_UDR ((uint32_t)0x00000001) /*!< I2S Underrun error */ -#define HAL_I2S_ERROR_OVR ((uint32_t)0x00000002) /*!< I2S Overrun error */ -#define HAL_I2SEX_ERROR_UDR ((uint32_t)0x00000004) /*!< I2S extended Underrun error */ -#define HAL_I2SEX_ERROR_OVR ((uint32_t)0x00000008) /*!< I2S extended Overrun error */ -#define HAL_I2S_ERROR_FRE ((uint32_t)0x00000010) /*!< I2S Frame format error */ -#define HAL_I2S_ERROR_DMA ((uint32_t)0x00000020) /*!< DMA transfer error */ -/** - * @} - */ - -/** @defgroup I2S_Clock_Source I2S Clock Source - * @{ - */ -#define I2S_CLOCK_PLL ((uint32_t)0x00000000) -#define I2S_CLOCK_EXTERNAL ((uint32_t)0x00000001) -#define I2S_CLOCK_PLLR ((uint32_t)0x00000002) -#define I2S_CLOCK_PLLSRC ((uint32_t)0x00000003) -/** - * @} - */ - -/** @defgroup I2S_Mode I2S Mode - * @{ - */ -#define I2S_MODE_SLAVE_TX ((uint32_t)0x00000000) -#define I2S_MODE_SLAVE_RX ((uint32_t)0x00000100) -#define I2S_MODE_MASTER_TX ((uint32_t)0x00000200) -#define I2S_MODE_MASTER_RX ((uint32_t)0x00000300) -/** - * @} - */ - -/** @defgroup I2S_Standard I2S Standard - * @{ - */ -#define I2S_STANDARD_PHILIPS ((uint32_t)0x00000000) -#define I2S_STANDARD_MSB ((uint32_t)0x00000010) -#define I2S_STANDARD_LSB ((uint32_t)0x00000020) -#define I2S_STANDARD_PCM_SHORT ((uint32_t)0x00000030) -#define I2S_STANDARD_PCM_LONG ((uint32_t)0x000000B0) -/** - * @} - */ - -/** @defgroup I2S_Data_Format I2S Data Format - * @{ - */ -#define I2S_DATAFORMAT_16B ((uint32_t)0x00000000) -#define I2S_DATAFORMAT_16B_EXTENDED ((uint32_t)0x00000001) -#define I2S_DATAFORMAT_24B ((uint32_t)0x00000003) -#define I2S_DATAFORMAT_32B ((uint32_t)0x00000005) -/** - * @} - */ - -/** @defgroup I2S_MCLK_Output I2S Mclk Output - * @{ - */ -#define I2S_MCLKOUTPUT_ENABLE ((uint32_t)SPI_I2SPR_MCKOE) -#define I2S_MCLKOUTPUT_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup I2S_Audio_Frequency I2S Audio Frequency - * @{ - */ -#define I2S_AUDIOFREQ_192K ((uint32_t)192000) -#define I2S_AUDIOFREQ_96K ((uint32_t)96000) -#define I2S_AUDIOFREQ_48K ((uint32_t)48000) -#define I2S_AUDIOFREQ_44K ((uint32_t)44100) -#define I2S_AUDIOFREQ_32K ((uint32_t)32000) -#define I2S_AUDIOFREQ_22K ((uint32_t)22050) -#define I2S_AUDIOFREQ_16K ((uint32_t)16000) -#define I2S_AUDIOFREQ_11K ((uint32_t)11025) -#define I2S_AUDIOFREQ_8K ((uint32_t)8000) -#define I2S_AUDIOFREQ_DEFAULT ((uint32_t)2) -/** - * @} - */ - -/** @defgroup I2S_FullDuplex_Mode I2S FullDuplex Mode - * @{ - */ -#define I2S_FULLDUPLEXMODE_DISABLE ((uint32_t)0x00000000) -#define I2S_FULLDUPLEXMODE_ENABLE ((uint32_t)0x00000001) -/** - * @} - */ - -/** @defgroup I2S_Clock_Polarity I2S Clock Polarity - * @{ - */ -#define I2S_CPOL_LOW ((uint32_t)0x00000000) -#define I2S_CPOL_HIGH ((uint32_t)SPI_I2SCFGR_CKPOL) -/** - * @} - */ - -/** @defgroup I2S_Interrupts_Definition I2S Interrupts Definition - * @{ - */ -#define I2S_IT_TXE SPI_CR2_TXEIE -#define I2S_IT_RXNE SPI_CR2_RXNEIE -#define I2S_IT_ERR SPI_CR2_ERRIE -/** - * @} - */ - -/** @defgroup I2S_Flags_Definition I2S Flags Definition - * @{ - */ -#define I2S_FLAG_TXE SPI_SR_TXE -#define I2S_FLAG_RXNE SPI_SR_RXNE - -#define I2S_FLAG_UDR SPI_SR_UDR -#define I2S_FLAG_OVR SPI_SR_OVR -#define I2S_FLAG_FRE SPI_SR_FRE - -#define I2S_FLAG_CHSIDE SPI_SR_CHSIDE -#define I2S_FLAG_BSY SPI_SR_BSY -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup I2S_Exported_Macros I2S Exported Macros - * @{ - */ - -/** @brief Reset I2S handle state - * @param __HANDLE__: specifies the I2S Handle. - * @retval None - */ -#define __HAL_I2S_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_I2S_STATE_RESET) - -/** @brief Enable or disable the specified SPI peripheral (in I2S mode). - * @param __HANDLE__: specifies the I2S Handle. - * @retval None - */ -#define __HAL_I2S_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR |= SPI_I2SCFGR_I2SE) -#define __HAL_I2S_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->I2SCFGR &= ~SPI_I2SCFGR_I2SE) - -/** @brief Enable or disable the specified I2S interrupts. - * @param __HANDLE__: specifies the I2S Handle. - * @param __INTERRUPT__: specifies the interrupt source to enable or disable. - * This parameter can be one of the following values: - * @arg I2S_IT_TXE: Tx buffer empty interrupt enable - * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable - * @arg I2S_IT_ERR: Error interrupt enable - * @retval None - */ -#define __HAL_I2S_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__)) -#define __HAL_I2S_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= ~(__INTERRUPT__)) - -/** @brief Checks if the specified I2S interrupt source is enabled or disabled. - * @param __HANDLE__: specifies the I2S Handle. - * This parameter can be I2S where x: 1, 2, or 3 to select the I2S peripheral. - * @param __INTERRUPT__: specifies the I2S interrupt source to check. - * This parameter can be one of the following values: - * @arg I2S_IT_TXE: Tx buffer empty interrupt enable - * @arg I2S_IT_RXNE: RX buffer not empty interrupt enable - * @arg I2S_IT_ERR: Error interrupt enable - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_I2S_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Checks whether the specified I2S flag is set or not. - * @param __HANDLE__: specifies the I2S Handle. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg I2S_FLAG_RXNE: Receive buffer not empty flag - * @arg I2S_FLAG_TXE: Transmit buffer empty flag - * @arg I2S_FLAG_UDR: Underrun flag - * @arg I2S_FLAG_OVR: Overrun flag - * @arg I2S_FLAG_FRE: Frame error flag - * @arg I2S_FLAG_CHSIDE: Channel Side flag - * @arg I2S_FLAG_BSY: Busy flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_I2S_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) - -/** @brief Clears the I2S OVR pending flag. - * @param __HANDLE__: specifies the I2S Handle. - * @retval None - */ -#define __HAL_I2S_CLEAR_OVRFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg; \ - tmpreg = (__HANDLE__)->Instance->DR; \ - tmpreg = (__HANDLE__)->Instance->SR; \ - UNUSED(tmpreg); \ - } while(0) - -/** @brief Clears the I2S UDR pending flag. - * @param __HANDLE__: specifies the I2S Handle. - * @retval None - */ -#define __HAL_I2S_CLEAR_UDRFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg; \ - tmpreg = (__HANDLE__)->Instance->SR; \ - UNUSED(tmpreg); \ - } while(0) -/** - * @} - */ - -/* Include I2S Extension module */ -#include "stm32f4xx_hal_i2s_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup I2S_Exported_Functions - * @{ - */ - -/** @addtogroup I2S_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions **********************************/ -HAL_StatusTypeDef HAL_I2S_Init(I2S_HandleTypeDef *hi2s); -HAL_StatusTypeDef HAL_I2S_DeInit (I2S_HandleTypeDef *hi2s); -void HAL_I2S_MspInit(I2S_HandleTypeDef *hi2s); -void HAL_I2S_MspDeInit(I2S_HandleTypeDef *hi2s); -/** - * @} - */ - -/** @addtogroup I2S_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions *****************************************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_I2S_Transmit(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_I2S_Receive(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size, uint32_t Timeout); - - /* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_I2S_Transmit_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2S_Receive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); -void HAL_I2S_IRQHandler(I2S_HandleTypeDef *hi2s); - -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_I2S_Transmit_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_I2S_Receive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pData, uint16_t Size); - -HAL_StatusTypeDef HAL_I2S_DMAPause(I2S_HandleTypeDef *hi2s); -HAL_StatusTypeDef HAL_I2S_DMAResume(I2S_HandleTypeDef *hi2s); -HAL_StatusTypeDef HAL_I2S_DMAStop(I2S_HandleTypeDef *hi2s); - -/* Peripheral Control and State functions **************************************/ -HAL_I2S_StateTypeDef HAL_I2S_GetState(I2S_HandleTypeDef *hi2s); -uint32_t HAL_I2S_GetError(I2S_HandleTypeDef *hi2s); - -/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/ -void HAL_I2S_TxHalfCpltCallback(I2S_HandleTypeDef *hi2s); -void HAL_I2S_TxCpltCallback(I2S_HandleTypeDef *hi2s); -void HAL_I2S_RxHalfCpltCallback(I2S_HandleTypeDef *hi2s); -void HAL_I2S_RxCpltCallback(I2S_HandleTypeDef *hi2s); -void HAL_I2S_ErrorCallback(I2S_HandleTypeDef *hi2s); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup I2S_Private_Constants I2S Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup I2S_Private_Macros I2S Private Macros - * @{ - */ -#define IS_I2S_CLOCKSOURCE(CLOCK) (((CLOCK) == I2S_CLOCK_EXTERNAL) || \ - ((CLOCK) == I2S_CLOCK_PLLR) ||\ - ((CLOCK) == I2S_CLOCK_PLLSRC) ||\ - ((CLOCK) == I2S_CLOCK_PLL)) - -#define IS_I2S_MODE(MODE) (((MODE) == I2S_MODE_SLAVE_TX) || \ - ((MODE) == I2S_MODE_SLAVE_RX) || \ - ((MODE) == I2S_MODE_MASTER_TX) || \ - ((MODE) == I2S_MODE_MASTER_RX)) - -#define IS_I2S_STANDARD(STANDARD) (((STANDARD) == I2S_STANDARD_PHILIPS) || \ - ((STANDARD) == I2S_STANDARD_MSB) || \ - ((STANDARD) == I2S_STANDARD_LSB) || \ - ((STANDARD) == I2S_STANDARD_PCM_SHORT) || \ - ((STANDARD) == I2S_STANDARD_PCM_LONG)) - -#define IS_I2S_DATA_FORMAT(FORMAT) (((FORMAT) == I2S_DATAFORMAT_16B) || \ - ((FORMAT) == I2S_DATAFORMAT_16B_EXTENDED) || \ - ((FORMAT) == I2S_DATAFORMAT_24B) || \ - ((FORMAT) == I2S_DATAFORMAT_32B)) - -#define IS_I2S_MCLK_OUTPUT(OUTPUT) (((OUTPUT) == I2S_MCLKOUTPUT_ENABLE) || \ - ((OUTPUT) == I2S_MCLKOUTPUT_DISABLE)) - -#define IS_I2S_AUDIO_FREQ(FREQ) ((((FREQ) >= I2S_AUDIOFREQ_8K) && \ - ((FREQ) <= I2S_AUDIOFREQ_192K)) || \ - ((FREQ) == I2S_AUDIOFREQ_DEFAULT)) - -#define IS_I2S_FULLDUPLEX_MODE(MODE) (((MODE) == I2S_FULLDUPLEXMODE_DISABLE) || \ - ((MODE) == I2S_FULLDUPLEXMODE_ENABLE)) - -#define IS_I2S_CPOL(CPOL) (((CPOL) == I2S_CPOL_LOW) || \ - ((CPOL) == I2S_CPOL_HIGH)) - -#define I2SxEXT(__INSTANCE__) ((__INSTANCE__) == (SPI2)? (SPI_TypeDef *)(I2S2ext_BASE): (SPI_TypeDef *)(I2S3ext_BASE)) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup I2S_Private_Functions I2S Private Functions - * @{ - */ -void I2S_DMATxCplt(DMA_HandleTypeDef *hdma); -void I2S_DMATxHalfCplt(DMA_HandleTypeDef *hdma); -void I2S_DMARxCplt(DMA_HandleTypeDef *hdma); -void I2S_DMARxHalfCplt(DMA_HandleTypeDef *hdma); -void I2S_DMAError(DMA_HandleTypeDef *hdma); -HAL_StatusTypeDef I2S_WaitFlagStateUntilTimeout(I2S_HandleTypeDef *hi2s, uint32_t Flag, uint32_t Status, uint32_t Timeout); -HAL_StatusTypeDef I2S_Transmit_IT(I2S_HandleTypeDef *hi2s); -HAL_StatusTypeDef I2S_Receive_IT(I2S_HandleTypeDef *hi2s); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_HAL_I2S_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s_ex.h deleted file mode 100644 index 44c47f1..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_i2s_ex.h +++ /dev/null @@ -1,148 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_i2s_ex.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of I2S HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_I2S_EX_H -#define __STM32F4xx_HAL_I2S_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup I2SEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup I2SEx_Exported_Types I2S Exported Types - * @{ - */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup I2SEx_Exported_Constants I2S Exported Constants - * @{ - */ -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup I2SEx_Exported_Macros I2S Exported Macros - * @{ - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup I2SEx_Exported_Functions - * @{ - */ - -/** @addtogroup I2SEx_Exported_Functions_Group1 - * @{ - */ - -/* Extended features functions **************************************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_I2SEx_TransmitReceive(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size, uint32_t Timeout); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_I2SEx_TransmitReceive_DMA(I2S_HandleTypeDef *hi2s, uint16_t *pTxData, uint16_t *pRxData, uint16_t Size); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup I2SEx_Private_Constants I2S Private Constants - * @{ - */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup I2SEx_Private_Macros I2S Private Macros - * @{ - */ -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup I2SEx_Private_Functions I2S Private Functions - * @{ - */ -HAL_StatusTypeDef I2SEx_TransmitReceive_IT(I2S_HandleTypeDef *hi2s); -uint32_t I2S_GetInputClock(I2S_HandleTypeDef *hi2s); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_HAL_I2S_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_irda.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_irda.h deleted file mode 100644 index e7491ab..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_irda.h +++ /dev/null @@ -1,538 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_irda.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of IRDA HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_IRDA_H -#define __STM32F4xx_HAL_IRDA_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup IRDA - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup IRDA_Exported_Types IRDA Exported Types - * @{ - */ -/** - * @brief IRDA Init Structure definition - */ -typedef struct -{ - uint32_t BaudRate; /*!< This member configures the IRDA communication baud rate. - The baud rate is computed using the following formula: - - IntegerDivider = ((PCLKx) / (8 * (hirda->Init.BaudRate))) - - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */ - - uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. - This parameter can be a value of @ref IRDA_Word_Length */ - - - uint32_t Parity; /*!< Specifies the parity mode. - This parameter can be a value of @ref IRDA_Parity - @note When parity is enabled, the computed parity is inserted - at the MSB position of the transmitted data (9th bit when - the word length is set to 9 data bits; 8th bit when the - word length is set to 8 data bits). */ - - uint32_t Mode; /*!< Specifies wether the Receive or Transmit mode is enabled or disabled. - This parameter can be a value of @ref IRDA_Mode */ - - uint8_t Prescaler; /*!< Specifies the Prescaler */ - - uint32_t IrDAMode; /*!< Specifies the IrDA mode - This parameter can be a value of @ref IRDA_Low_Power */ -}IRDA_InitTypeDef; - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_IRDA_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */ - HAL_IRDA_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ - HAL_IRDA_STATE_BUSY = 0x02, /*!< An internal process is ongoing */ - HAL_IRDA_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ - HAL_IRDA_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ - HAL_IRDA_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ - HAL_IRDA_STATE_TIMEOUT = 0x03, /*!< Timeout state */ - HAL_IRDA_STATE_ERROR = 0x04 /*!< Error */ -}HAL_IRDA_StateTypeDef; - -/** - * @brief IRDA handle Structure definition - */ -typedef struct -{ - USART_TypeDef *Instance; /* USART registers base address */ - - IRDA_InitTypeDef Init; /* IRDA communication parameters */ - - uint8_t *pTxBuffPtr; /* Pointer to IRDA Tx transfer Buffer */ - - uint16_t TxXferSize; /* IRDA Tx Transfer size */ - - uint16_t TxXferCount; /* IRDA Tx Transfer Counter */ - - uint8_t *pRxBuffPtr; /* Pointer to IRDA Rx transfer Buffer */ - - uint16_t RxXferSize; /* IRDA Rx Transfer size */ - - uint16_t RxXferCount; /* IRDA Rx Transfer Counter */ - - DMA_HandleTypeDef *hdmatx; /* IRDA Tx DMA Handle parameters */ - - DMA_HandleTypeDef *hdmarx; /* IRDA Rx DMA Handle parameters */ - - HAL_LockTypeDef Lock; /* Locking object */ - - __IO HAL_IRDA_StateTypeDef State; /* IRDA communication state */ - - __IO uint32_t ErrorCode; /* IRDA Error code */ - -}IRDA_HandleTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup IRDA_Exported_Constants IRDA Exported constants - * @{ - */ -/** @defgroup IRDA_Error_Code IRDA Error Code - * @brief IRDA Error Code - * @{ - */ -#define HAL_IRDA_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ -#define HAL_IRDA_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */ -#define HAL_IRDA_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */ -#define HAL_IRDA_ERROR_FE ((uint32_t)0x00000004) /*!< Frame error */ -#define HAL_IRDA_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */ -#define HAL_IRDA_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */ -/** - * @} - */ - -/** @defgroup IRDA_Word_Length IRDA Word Length - * @{ - */ -#define IRDA_WORDLENGTH_8B ((uint32_t)0x00000000) -#define IRDA_WORDLENGTH_9B ((uint32_t)USART_CR1_M) -/** - * @} - */ - -/** @defgroup IRDA_Parity IRDA Parity - * @{ - */ -#define IRDA_PARITY_NONE ((uint32_t)0x00000000) -#define IRDA_PARITY_EVEN ((uint32_t)USART_CR1_PCE) -#define IRDA_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) -/** - * @} - */ - -/** @defgroup IRDA_Mode IRDA Transfer Mode - * @{ - */ -#define IRDA_MODE_RX ((uint32_t)USART_CR1_RE) -#define IRDA_MODE_TX ((uint32_t)USART_CR1_TE) -#define IRDA_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) -/** - * @} - */ - -/** @defgroup IRDA_Low_Power IRDA Low Power - * @{ - */ -#define IRDA_POWERMODE_LOWPOWER ((uint32_t)USART_CR3_IRLP) -#define IRDA_POWERMODE_NORMAL ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup IRDA_Flags IRDA Flags - * Elements values convention: 0xXXXX - * - 0xXXXX : Flag mask in the SR register - * @{ - */ -#define IRDA_FLAG_TXE ((uint32_t)0x00000080) -#define IRDA_FLAG_TC ((uint32_t)0x00000040) -#define IRDA_FLAG_RXNE ((uint32_t)0x00000020) -#define IRDA_FLAG_IDLE ((uint32_t)0x00000010) -#define IRDA_FLAG_ORE ((uint32_t)0x00000008) -#define IRDA_FLAG_NE ((uint32_t)0x00000004) -#define IRDA_FLAG_FE ((uint32_t)0x00000002) -#define IRDA_FLAG_PE ((uint32_t)0x00000001) -/** - * @} - */ - -/** @defgroup IRDA_Interrupt_definition IRDA Interrupt Definitions - * Elements values convention: 0xY000XXXX - * - XXXX : Interrupt mask in the XX register - * - Y : Interrupt source register (2bits) - * - 01: CR1 register - * - 10: CR2 register - * - 11: CR3 register - * @{ - */ -#define IRDA_IT_PE ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_PEIE)) -#define IRDA_IT_TXE ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_TXEIE)) -#define IRDA_IT_TC ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_TCIE)) -#define IRDA_IT_RXNE ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE)) -#define IRDA_IT_IDLE ((uint32_t)(IRDA_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE)) - -#define IRDA_IT_LBD ((uint32_t)(IRDA_CR2_REG_INDEX << 28 | USART_CR2_LBDIE)) - -#define IRDA_IT_CTS ((uint32_t)(IRDA_CR3_REG_INDEX << 28 | USART_CR3_CTSIE)) -#define IRDA_IT_ERR ((uint32_t)(IRDA_CR3_REG_INDEX << 28 | USART_CR3_EIE)) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup IRDA_Exported_Macros IRDA Exported Macros - * @{ - */ - -/** @brief Reset IRDA handle state - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @retval None - */ -#define __HAL_IRDA_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IRDA_STATE_RESET) - -/** @brief Flushs the IRDA DR register - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - */ -#define __HAL_IRDA_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR) - -/** @brief Checks whether the specified IRDA flag is set or not. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg IRDA_FLAG_TXE: Transmit data register empty flag - * @arg IRDA_FLAG_TC: Transmission Complete flag - * @arg IRDA_FLAG_RXNE: Receive data register not empty flag - * @arg IRDA_FLAG_IDLE: Idle Line detection flag - * @arg IRDA_FLAG_ORE: OverRun Error flag - * @arg IRDA_FLAG_NE: Noise Error flag - * @arg IRDA_FLAG_FE: Framing Error flag - * @arg IRDA_FLAG_PE: Parity Error flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_IRDA_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) - -/** @brief Clears the specified IRDA pending flag. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param __FLAG__: specifies the flag to check. - * This parameter can be any combination of the following values: - * @arg IRDA_FLAG_TC: Transmission Complete flag. - * @arg IRDA_FLAG_RXNE: Receive data register not empty flag. - * - * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (OverRun - * error) and IDLE (Idle line detected) flags are cleared by software - * sequence: a read operation to USART_SR register followed by a read - * operation to USART_DR register. - * @note RXNE flag can be also cleared by a read to the USART_DR register. - * @note TC flag can be also cleared by software sequence: a read operation to - * USART_SR register followed by a write operation to USART_DR register. - * @note TXE flag is cleared only by a write to the USART_DR register. - * - * @retval None - */ -#define __HAL_IRDA_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) - -/** @brief Clear the IRDA PE pending flag. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @retval None - */ -#define __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg; \ - tmpreg = (__HANDLE__)->Instance->SR; \ - UNUSED(tmpreg); \ - } while(0) - -/** @brief Clear the IRDA FE pending flag. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @retval None - */ -#define __HAL_IRDA_CLEAR_FEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Clear the IRDA NE pending flag. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @retval None - */ -#define __HAL_IRDA_CLEAR_NEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Clear the IRDA ORE pending flag. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @retval None - */ -#define __HAL_IRDA_CLEAR_OREFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Clear the IRDA IDLE pending flag. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @retval None - */ -#define __HAL_IRDA_CLEAR_IDLEFLAG(__HANDLE__) __HAL_IRDA_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Enables or disables the specified IRDA interrupt. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param __INTERRUPT__: specifies the IRDA interrupt source to check. - * This parameter can be one of the following values: - * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt - * @arg IRDA_IT_TC: Transmission complete interrupt - * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt - * @arg IRDA_IT_IDLE: Idle line detection interrupt - * @arg IRDA_IT_PE: Parity Error interrupt - * @arg IRDA_IT_ERR: Error interrupt(Frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_IRDA_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \ - (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & IRDA_IT_MASK)): \ - ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & IRDA_IT_MASK))) -#define __HAL_IRDA_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \ - (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & IRDA_IT_MASK)): \ - ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & IRDA_IT_MASK))) - -/** @brief Checks whether the specified IRDA interrupt has occurred or not. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param __IT__: specifies the IRDA interrupt source to check. - * This parameter can be one of the following values: - * @arg IRDA_IT_TXE: Transmit Data Register empty interrupt - * @arg IRDA_IT_TC: Transmission complete interrupt - * @arg IRDA_IT_RXNE: Receive Data register not empty interrupt - * @arg IRDA_IT_IDLE: Idle line detection interrupt - * @arg USART_IT_ERR: Error interrupt - * @arg IRDA_IT_PE: Parity Error interrupt - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_IRDA_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == 2)? \ - (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & IRDA_IT_MASK)) - -/** @brief Macro to enable the IRDA's one bit sample method - * @param __HANDLE__: specifies the IRDA Handle. - * @retval None - */ -#define __HAL_IRDA_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) - -/** @brief Macro to disable the IRDA's one bit sample method - * @param __HANDLE__: specifies the IRDA Handle. - * @retval None - */ -#define __HAL_IRDA_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT)) - -/** @brief Enable UART/USART associated to IRDA Handle - * @param __HANDLE__: specifies the IRDA Handle. - * IRDA Handle selects the USARTx or UARTy peripheral - * (USART,UART availability and x,y values depending on device). - * @retval None - */ -#define __HAL_IRDA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) - -/** @brief Disable UART/USART associated to IRDA Handle - * @param __HANDLE__: specifies the IRDA Handle. - * IRDA Handle selects the USARTx or UARTy peripheral - * (USART,UART availability and x,y values depending on device). - * @retval None - */ -#define __HAL_IRDA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup IRDA_Exported_Functions - * @{ - */ - -/** @addtogroup IRDA_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions **********************************/ -HAL_StatusTypeDef HAL_IRDA_Init(IRDA_HandleTypeDef *hirda); -HAL_StatusTypeDef HAL_IRDA_DeInit(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_MspInit(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_MspDeInit(IRDA_HandleTypeDef *hirda); -/** - * @} - */ - -/** @addtogroup IRDA_Exported_Functions_Group2 - * @{ - */ -/* IO operation functions *******************************************************/ -HAL_StatusTypeDef HAL_IRDA_Transmit(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_IRDA_Receive(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_IRDA_Transmit_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_IRDA_Receive_IT(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_IRDA_Transmit_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_IRDA_Receive_DMA(IRDA_HandleTypeDef *hirda, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_IRDA_DMAPause(IRDA_HandleTypeDef *hirda); -HAL_StatusTypeDef HAL_IRDA_DMAResume(IRDA_HandleTypeDef *hirda); -HAL_StatusTypeDef HAL_IRDA_DMAStop(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_TxCpltCallback(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_RxCpltCallback(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_TxHalfCpltCallback(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_RxHalfCpltCallback(IRDA_HandleTypeDef *hirda); -void HAL_IRDA_ErrorCallback(IRDA_HandleTypeDef *hirda); -/** - * @} - */ - -/** @addtogroup IRDA_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State functions **************************************************/ -HAL_IRDA_StateTypeDef HAL_IRDA_GetState(IRDA_HandleTypeDef *hirda); -uint32_t HAL_IRDA_GetError(IRDA_HandleTypeDef *hirda); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup IRDA_Private_Constants IRDA Private Constants - * @{ - */ - -/** @brief IRDA interruptions flag mask - * - */ -#define IRDA_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \ - USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE ) - - -#define IRDA_CR1_REG_INDEX 1 -#define IRDA_CR2_REG_INDEX 2 -#define IRDA_CR3_REG_INDEX 3 -/** - * @} - */ - -/* Private macros --------------------------------------------------------*/ -/** @defgroup IRDA_Private_Macros IRDA Private Macros - * @{ - */ -#define IS_IRDA_WORD_LENGTH(LENGTH) (((LENGTH) == IRDA_WORDLENGTH_8B) || \ - ((LENGTH) == IRDA_WORDLENGTH_9B)) -#define IS_IRDA_PARITY(PARITY) (((PARITY) == IRDA_PARITY_NONE) || \ - ((PARITY) == IRDA_PARITY_EVEN) || \ - ((PARITY) == IRDA_PARITY_ODD)) -#define IS_IRDA_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3) == 0x00) && ((MODE) != (uint32_t)0x000000)) -#define IS_IRDA_POWERMODE(MODE) (((MODE) == IRDA_POWERMODE_LOWPOWER) || \ - ((MODE) == IRDA_POWERMODE_NORMAL)) -#define IS_IRDA_BAUDRATE(BAUDRATE) ((BAUDRATE) < 115201) - -#define IRDA_DIV(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_))) -#define IRDA_DIVMANT(_PCLK_, _BAUD_) (IRDA_DIV((_PCLK_), (_BAUD_))/100) -#define IRDA_DIVFRAQ(_PCLK_, _BAUD_) (((IRDA_DIV((_PCLK_), (_BAUD_)) - (IRDA_DIVMANT((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100) -#define IRDA_BRR(_PCLK_, _BAUD_) ((IRDA_DIVMANT((_PCLK_), (_BAUD_)) << 4)|(IRDA_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F)) - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup IRDA_Private_Functions IRDA Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_IRDA_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_iwdg.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_iwdg.h deleted file mode 100644 index 81362d1..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_iwdg.h +++ /dev/null @@ -1,288 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_iwdg.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of IWDG HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_IWDG_H -#define __STM32F4xx_HAL_IWDG_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup IWDG - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup IWDG_Exported_Types IWDG Exported Types - * @{ - */ - -/** - * @brief IWDG HAL State Structure definition - */ -typedef enum -{ - HAL_IWDG_STATE_RESET = 0x00, /*!< IWDG not yet initialized or disabled */ - HAL_IWDG_STATE_READY = 0x01, /*!< IWDG initialized and ready for use */ - HAL_IWDG_STATE_BUSY = 0x02, /*!< IWDG internal process is ongoing */ - HAL_IWDG_STATE_TIMEOUT = 0x03, /*!< IWDG timeout state */ - HAL_IWDG_STATE_ERROR = 0x04 /*!< IWDG error state */ -}HAL_IWDG_StateTypeDef; - -/** - * @brief IWDG Init structure definition - */ -typedef struct -{ - uint32_t Prescaler; /*!< Select the prescaler of the IWDG. - This parameter can be a value of @ref IWDG_Prescaler */ - - uint32_t Reload; /*!< Specifies the IWDG down-counter reload value. - This parameter must be a number between Min_Data = 0 and Max_Data = 0x0FFF */ -}IWDG_InitTypeDef; - -/** - * @brief IWDG Handle Structure definition - */ -typedef struct -{ - IWDG_TypeDef *Instance; /*!< Register base address */ - - IWDG_InitTypeDef Init; /*!< IWDG required parameters */ - - HAL_LockTypeDef Lock; /*!< IWDG Locking object */ - - __IO HAL_IWDG_StateTypeDef State; /*!< IWDG communication state */ -}IWDG_HandleTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup IWDG_Exported_Constants IWDG Exported Constants - * @{ - */ - -/** @defgroup IWDG_Registers_BitMask IWDG Registers BitMask - * @brief IWDG registers bit mask - * @{ - */ -/* --- KR Register ---*/ -/* KR register bit mask */ -#define IWDG_KEY_RELOAD ((uint32_t)0xAAAA) /*!< IWDG Reload Counter Enable */ -#define IWDG_KEY_ENABLE ((uint32_t)0xCCCC) /*!< IWDG Peripheral Enable */ -#define IWDG_KEY_WRITE_ACCESS_ENABLE ((uint32_t)0x5555) /*!< IWDG KR Write Access Enable */ -#define IWDG_KEY_WRITE_ACCESS_DISABLE ((uint32_t)0x0000) /*!< IWDG KR Write Access Disable */ -/** - * @} - */ - -/** @defgroup IWDG_Flag_definition IWDG Flag definition - * @{ - */ -#define IWDG_FLAG_PVU ((uint32_t)IWDG_SR_PVU) /*!< Watchdog counter prescaler value update Flag */ -#define IWDG_FLAG_RVU ((uint32_t)IWDG_SR_RVU) /*!< Watchdog counter reload value update Flag */ -/** - * @} - */ - -/** @defgroup IWDG_Prescaler IWDG Prescaler - * @{ - */ -#define IWDG_PRESCALER_4 ((uint8_t)0x00) /*!< IWDG prescaler set to 4 */ -#define IWDG_PRESCALER_8 ((uint8_t)(IWDG_PR_PR_0)) /*!< IWDG prescaler set to 8 */ -#define IWDG_PRESCALER_16 ((uint8_t)(IWDG_PR_PR_1)) /*!< IWDG prescaler set to 16 */ -#define IWDG_PRESCALER_32 ((uint8_t)(IWDG_PR_PR_1 | IWDG_PR_PR_0)) /*!< IWDG prescaler set to 32 */ -#define IWDG_PRESCALER_64 ((uint8_t)(IWDG_PR_PR_2)) /*!< IWDG prescaler set to 64 */ -#define IWDG_PRESCALER_128 ((uint8_t)(IWDG_PR_PR_2 | IWDG_PR_PR_0)) /*!< IWDG prescaler set to 128 */ -#define IWDG_PRESCALER_256 ((uint8_t)(IWDG_PR_PR_2 | IWDG_PR_PR_1)) /*!< IWDG prescaler set to 256 */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup IWDG_Exported_Macros IWDG Exported Macros - * @{ - */ - -/** @brief Reset IWDG handle state - * @param __HANDLE__: IWDG handle. - * @retval None - */ -#define __HAL_IWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_IWDG_STATE_RESET) - -/** - * @brief Enables the IWDG peripheral. - * @param __HANDLE__: IWDG handle - * @retval None - */ -#define __HAL_IWDG_START(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_ENABLE) - -/** - * @brief Reloads IWDG counter with value defined in the reload register - * (write access to IWDG_PR and IWDG_RLR registers disabled). - * @param __HANDLE__: IWDG handle - * @retval None - */ -#define __HAL_IWDG_RELOAD_COUNTER(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_RELOAD) - -/** - * @brief Gets the selected IWDG's flag status. - * @param __HANDLE__: IWDG handle - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg IWDG_FLAG_PVU: Watchdog counter reload value update flag - * @arg IWDG_FLAG_RVU: Watchdog counter prescaler value flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_IWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup IWDG_Exported_Functions - * @{ - */ - -/** @addtogroup IWDG_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions ********************************/ -HAL_StatusTypeDef HAL_IWDG_Init(IWDG_HandleTypeDef *hiwdg); -void HAL_IWDG_MspInit(IWDG_HandleTypeDef *hiwdg); -/** - * @} - */ - -/** @addtogroup IWDG_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions ****************************************************/ -HAL_StatusTypeDef HAL_IWDG_Start(IWDG_HandleTypeDef *hiwdg); -HAL_StatusTypeDef HAL_IWDG_Refresh(IWDG_HandleTypeDef *hiwdg); -/** - * @} - */ - -/** @addtogroup IWDG_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State functions ************************************************/ -HAL_IWDG_StateTypeDef HAL_IWDG_GetState(IWDG_HandleTypeDef *hiwdg); - -/** - * @} - */ - -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/** @defgroup IWDG_Private_Macros IWDG Private Macros - * @{ - */ - -/** - * @brief Enables write access to IWDG_PR and IWDG_RLR registers. - * @param __HANDLE__: IWDG handle - * @retval None - */ -#define IWDG_ENABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_ENABLE) - -/** - * @brief Disables write access to IWDG_PR and IWDG_RLR registers. - * @param __HANDLE__: IWDG handle - * @retval None - */ -#define IWDG_DISABLE_WRITE_ACCESS(__HANDLE__) WRITE_REG((__HANDLE__)->Instance->KR, IWDG_KEY_WRITE_ACCESS_DISABLE) - - -#define IS_IWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == IWDG_PRESCALER_4) || \ - ((__PRESCALER__) == IWDG_PRESCALER_8) || \ - ((__PRESCALER__) == IWDG_PRESCALER_16) || \ - ((__PRESCALER__) == IWDG_PRESCALER_32) || \ - ((__PRESCALER__) == IWDG_PRESCALER_64) || \ - ((__PRESCALER__) == IWDG_PRESCALER_128)|| \ - ((__PRESCALER__) == IWDG_PRESCALER_256)) - - -#define IS_IWDG_RELOAD(__RELOAD__) ((__RELOAD__) <= 0xFFF) - -/** - * @} - */ - -/* Private define ------------------------------------------------------------*/ - /** @defgroup IWDG_Private_Constants IWDG Private Constants - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_IWDG_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_ltdc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_ltdc.h deleted file mode 100644 index 9bb3a68..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_ltdc.h +++ /dev/null @@ -1,631 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_ltdc.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of LTDC HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_LTDC_H -#define __STM32F4xx_HAL_LTDC_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F429xx) || defined(STM32F439xx) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup LTDC LTDC - * @brief LTDC HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup LTDC_Exported_Types LTDC Exported Types - * @{ - */ -#define MAX_LAYER 2 - -/** - * @brief LTDC color structure definition - */ -typedef struct -{ - uint8_t Blue; /*!< Configures the blue value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */ - - uint8_t Green; /*!< Configures the green value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */ - - uint8_t Red; /*!< Configures the red value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */ - - uint8_t Reserved; /*!< Reserved 0xFF */ -} LTDC_ColorTypeDef; - -/** - * @brief LTDC Init structure definition - */ -typedef struct -{ - uint32_t HSPolarity; /*!< configures the horizontal synchronization polarity. - This parameter can be one value of @ref LTDC_HS_POLARITY */ - - uint32_t VSPolarity; /*!< configures the vertical synchronization polarity. - This parameter can be one value of @ref LTDC_VS_POLARITY */ - - uint32_t DEPolarity; /*!< configures the data enable polarity. - This parameter can be one of value of @ref LTDC_DE_POLARITY */ - - uint32_t PCPolarity; /*!< configures the pixel clock polarity. - This parameter can be one of value of @ref LTDC_PC_POLARITY */ - - uint32_t HorizontalSync; /*!< configures the number of Horizontal synchronization width. - This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */ - - uint32_t VerticalSync; /*!< configures the number of Vertical synchronization height. - This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */ - - uint32_t AccumulatedHBP; /*!< configures the accumulated horizontal back porch width. - This parameter must be a number between Min_Data = LTDC_HorizontalSync and Max_Data = 0xFFF. */ - - uint32_t AccumulatedVBP; /*!< configures the accumulated vertical back porch height. - This parameter must be a number between Min_Data = LTDC_VerticalSync and Max_Data = 0x7FF. */ - - uint32_t AccumulatedActiveW; /*!< configures the accumulated active width. - This parameter must be a number between Min_Data = LTDC_AccumulatedHBP and Max_Data = 0xFFF. */ - - uint32_t AccumulatedActiveH; /*!< configures the accumulated active height. - This parameter must be a number between Min_Data = LTDC_AccumulatedVBP and Max_Data = 0x7FF. */ - - uint32_t TotalWidth; /*!< configures the total width. - This parameter must be a number between Min_Data = LTDC_AccumulatedActiveW and Max_Data = 0xFFF. */ - - uint32_t TotalHeigh; /*!< configures the total height. - This parameter must be a number between Min_Data = LTDC_AccumulatedActiveH and Max_Data = 0x7FF. */ - - LTDC_ColorTypeDef Backcolor; /*!< Configures the background color. */ -} LTDC_InitTypeDef; - -/** - * @brief LTDC Layer structure definition - */ -typedef struct -{ - uint32_t WindowX0; /*!< Configures the Window Horizontal Start Position. - This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */ - - uint32_t WindowX1; /*!< Configures the Window Horizontal Stop Position. - This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */ - - uint32_t WindowY0; /*!< Configures the Window vertical Start Position. - This parameter must be a number between Min_Data = 0x000 and Max_Data = 0xFFF. */ - - uint32_t WindowY1; /*!< Configures the Window vertical Stop Position. - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ - - uint32_t PixelFormat; /*!< Specifies the pixel format. - This parameter can be one of value of @ref LTDC_Pixelformat */ - - uint32_t Alpha; /*!< Specifies the constant alpha used for blending. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */ - - uint32_t Alpha0; /*!< Configures the default alpha value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. */ - - uint32_t BlendingFactor1; /*!< Select the blending factor 1. - This parameter can be one of value of @ref LTDC_BlendingFactor1 */ - - uint32_t BlendingFactor2; /*!< Select the blending factor 2. - This parameter can be one of value of @ref LTDC_BlendingFactor2 */ - - uint32_t FBStartAdress; /*!< Configures the color frame buffer address */ - - uint32_t ImageWidth; /*!< Configures the color frame buffer line length. - This parameter must be a number between Min_Data = 0x0000 and Max_Data = 0x1FFF. */ - - uint32_t ImageHeight; /*!< Specifies the number of line in frame buffer. - This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x7FF. */ - - LTDC_ColorTypeDef Backcolor; /*!< Configures the layer background color. */ -} LTDC_LayerCfgTypeDef; - -/** - * @brief HAL LTDC State structures definition - */ -typedef enum -{ - HAL_LTDC_STATE_RESET = 0x00, /*!< LTDC not yet initialized or disabled */ - HAL_LTDC_STATE_READY = 0x01, /*!< LTDC initialized and ready for use */ - HAL_LTDC_STATE_BUSY = 0x02, /*!< LTDC internal process is ongoing */ - HAL_LTDC_STATE_TIMEOUT = 0x03, /*!< LTDC Timeout state */ - HAL_LTDC_STATE_ERROR = 0x04 /*!< LTDC state error */ -}HAL_LTDC_StateTypeDef; - -/** - * @brief LTDC handle Structure definition - */ -typedef struct -{ - LTDC_TypeDef *Instance; /*!< LTDC Register base address */ - - LTDC_InitTypeDef Init; /*!< LTDC parameters */ - - LTDC_LayerCfgTypeDef LayerCfg[MAX_LAYER]; /*!< LTDC Layers parameters */ - - HAL_LockTypeDef Lock; /*!< LTDC Lock */ - - __IO HAL_LTDC_StateTypeDef State; /*!< LTDC state */ - - __IO uint32_t ErrorCode; /*!< LTDC Error code */ - -} LTDC_HandleTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup LTDC_Exported_Constants LTDC Exported Constants - * @{ - */ - -/** @defgroup LTDC_Error_Code LTDC Error Code - * @{ - */ -#define HAL_LTDC_ERROR_NONE ((uint32_t)0x00000000) /*!< LTDC No error */ -#define HAL_LTDC_ERROR_TE ((uint32_t)0x00000001) /*!< LTDC Transfer error */ -#define HAL_LTDC_ERROR_FU ((uint32_t)0x00000002) /*!< LTDC FIFO Underrun */ -#define HAL_LTDC_ERROR_TIMEOUT ((uint32_t)0x00000020) /*!< LTDC Timeout error */ -/** - * @} - */ - -/** @defgroup LTDC_HS_POLARITY LTDC HS POLARITY - * @{ - */ -#define LTDC_HSPOLARITY_AL ((uint32_t)0x00000000) /*!< Horizontal Synchronization is active low. */ -#define LTDC_HSPOLARITY_AH LTDC_GCR_HSPOL /*!< Horizontal Synchronization is active high. */ -/** - * @} - */ - -/** @defgroup LTDC_VS_POLARITY LTDC VS POLARITY - * @{ - */ -#define LTDC_VSPOLARITY_AL ((uint32_t)0x00000000) /*!< Vertical Synchronization is active low. */ -#define LTDC_VSPOLARITY_AH LTDC_GCR_VSPOL /*!< Vertical Synchronization is active high. */ -/** - * @} - */ - -/** @defgroup LTDC_DE_POLARITY LTDC DE POLARITY - * @{ - */ -#define LTDC_DEPOLARITY_AL ((uint32_t)0x00000000) /*!< Data Enable, is active low. */ -#define LTDC_DEPOLARITY_AH LTDC_GCR_DEPOL /*!< Data Enable, is active high. */ -/** - * @} - */ - -/** @defgroup LTDC_PC_POLARITY LTDC PC POLARITY - * @{ - */ -#define LTDC_PCPOLARITY_IPC ((uint32_t)0x00000000) /*!< input pixel clock. */ -#define LTDC_PCPOLARITY_IIPC LTDC_GCR_PCPOL /*!< inverted input pixel clock. */ -/** - * @} - */ - -/** @defgroup LTDC_SYNC LTDC SYNC - * @{ - */ -#define LTDC_HORIZONTALSYNC (LTDC_SSCR_HSW >> 16) /*!< Horizontal synchronization width. */ -#define LTDC_VERTICALSYNC LTDC_SSCR_VSH /*!< Vertical synchronization height. */ -/** - * @} - */ - -/** @defgroup LTDC_BACK_COLOR LTDC BACK COLOR - * @{ - */ -#define LTDC_COLOR ((uint32_t)0x000000FF) /*!< Color mask */ -/** - * @} - */ - -/** @defgroup LTDC_BlendingFactor1 LTDC Blending Factor1 - * @{ - */ -#define LTDC_BLENDING_FACTOR1_CA ((uint32_t)0x00000400) /*!< Blending factor : Cte Alpha */ -#define LTDC_BLENDING_FACTOR1_PAxCA ((uint32_t)0x00000600) /*!< Blending factor : Cte Alpha x Pixel Alpha*/ -/** - * @} - */ - -/** @defgroup LTDC_BlendingFactor2 LTDC Blending Factor2 - * @{ - */ -#define LTDC_BLENDING_FACTOR2_CA ((uint32_t)0x00000005) /*!< Blending factor : Cte Alpha */ -#define LTDC_BLENDING_FACTOR2_PAxCA ((uint32_t)0x00000007) /*!< Blending factor : Cte Alpha x Pixel Alpha*/ -/** - * @} - */ - -/** @defgroup LTDC_Pixelformat LTDC Pixel format - * @{ - */ -#define LTDC_PIXEL_FORMAT_ARGB8888 ((uint32_t)0x00000000) /*!< ARGB8888 LTDC pixel format */ -#define LTDC_PIXEL_FORMAT_RGB888 ((uint32_t)0x00000001) /*!< RGB888 LTDC pixel format */ -#define LTDC_PIXEL_FORMAT_RGB565 ((uint32_t)0x00000002) /*!< RGB565 LTDC pixel format */ -#define LTDC_PIXEL_FORMAT_ARGB1555 ((uint32_t)0x00000003) /*!< ARGB1555 LTDC pixel format */ -#define LTDC_PIXEL_FORMAT_ARGB4444 ((uint32_t)0x00000004) /*!< ARGB4444 LTDC pixel format */ -#define LTDC_PIXEL_FORMAT_L8 ((uint32_t)0x00000005) /*!< L8 LTDC pixel format */ -#define LTDC_PIXEL_FORMAT_AL44 ((uint32_t)0x00000006) /*!< AL44 LTDC pixel format */ -#define LTDC_PIXEL_FORMAT_AL88 ((uint32_t)0x00000007) /*!< AL88 LTDC pixel format */ -/** - * @} - */ - -/** @defgroup LTDC_Alpha LTDC Alpha - * @{ - */ -#define LTDC_ALPHA LTDC_LxCACR_CONSTA /*!< LTDC Cte Alpha mask */ -/** - * @} - */ - -/** @defgroup LTDC_LAYER_Config LTDC LAYER Config - * @{ - */ -#define LTDC_STOPPOSITION (LTDC_LxWHPCR_WHSPPOS >> 16) /*!< LTDC Layer stop position */ -#define LTDC_STARTPOSITION LTDC_LxWHPCR_WHSTPOS /*!< LTDC Layer start position */ - -#define LTDC_COLOR_FRAME_BUFFER LTDC_LxCFBLR_CFBLL /*!< LTDC Layer Line length */ -#define LTDC_LINE_NUMBER LTDC_LxCFBLNR_CFBLNBR /*!< LTDC Layer Line number */ -/** - * @} - */ - -/** @defgroup LTDC_Interrupts LTDC Interrupts - * @{ - */ -#define LTDC_IT_LI LTDC_IER_LIE -#define LTDC_IT_FU LTDC_IER_FUIE -#define LTDC_IT_TE LTDC_IER_TERRIE -#define LTDC_IT_RR LTDC_IER_RRIE -/** - * @} - */ - -/** @defgroup LTDC_Flag LTDC Flag - * @{ - */ -#define LTDC_FLAG_LI LTDC_ISR_LIF -#define LTDC_FLAG_FU LTDC_ISR_FUIF -#define LTDC_FLAG_TE LTDC_ISR_TERRIF -#define LTDC_FLAG_RR LTDC_ISR_RRIF -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup LTDC_Exported_Macros LTDC Exported Macros - * @{ - */ - -/** @brief Reset LTDC handle state - * @param __HANDLE__: specifies the LTDC handle. - * @retval None - */ -#define __HAL_LTDC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_LTDC_STATE_RESET) - -/** - * @brief Enable the LTDC. - * @param __HANDLE__: LTDC handle - * @retval None. - */ -#define __HAL_LTDC_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR |= LTDC_GCR_LTDCEN) - -/** - * @brief Disable the LTDC. - * @param __HANDLE__: LTDC handle - * @retval None. - */ -#define __HAL_LTDC_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->GCR &= ~(LTDC_GCR_LTDCEN)) - -/** - * @brief Enable the LTDC Layer. - * @param __HANDLE__: LTDC handle - * @param __LAYER__: Specify the layer to be enabled - * This parameter can be 0 or 1 - * @retval None. - */ -#define __HAL_LTDC_LAYER_ENABLE(__HANDLE__, __LAYER__) ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR |= (uint32_t)LTDC_LxCR_LEN) - -/** - * @brief Disable the LTDC Layer. - * @param __HANDLE__: LTDC handle - * @param __LAYER__: Specify the layer to be disabled - * This parameter can be 0 or 1 - * @retval None. - */ -#define __HAL_LTDC_LAYER_DISABLE(__HANDLE__, __LAYER__) ((LTDC_LAYER((__HANDLE__), (__LAYER__)))->CR &= ~(uint32_t)LTDC_LxCR_LEN) - -/** - * @brief Reload Layer Configuration. - * @param __HANDLE__: LTDC handle - * @retval None. - */ -#define __HAL_LTDC_RELOAD_CONFIG(__HANDLE__) ((__HANDLE__)->Instance->SRCR |= LTDC_SRCR_IMR) - -/* Interrupt & Flag management */ -/** - * @brief Get the LTDC pending flags. - * @param __HANDLE__: LTDC handle - * @param __FLAG__: Get the specified flag. - * This parameter can be any combination of the following values: - * @arg LTDC_FLAG_LI: Line Interrupt flag - * @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag - * @arg LTDC_FLAG_TE: Transfer Error interrupt flag - * @arg LTDC_FLAG_RR: Register Reload Interrupt Flag - * @retval The state of FLAG (SET or RESET). - */ -#define __HAL_LTDC_GET_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR & (__FLAG__)) - -/** - * @brief Clears the LTDC pending flags. - * @param __HANDLE__: LTDC handle - * @param __FLAG__: specifies the flag to clear. - * This parameter can be any combination of the following values: - * @arg LTDC_FLAG_LI: Line Interrupt flag - * @arg LTDC_FLAG_FU: FIFO Underrun Interrupt flag - * @arg LTDC_FLAG_TE: Transfer Error interrupt flag - * @arg LTDC_FLAG_RR: Register Reload Interrupt Flag - * @retval None - */ -#define __HAL_LTDC_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ICR = (__FLAG__)) - -/** - * @brief Enables the specified LTDC interrupts. - * @param __HANDLE__: LTDC handle - * @param __INTERRUPT__: specifies the LTDC interrupt sources to be enabled. - * This parameter can be any combination of the following values: - * @arg LTDC_IT_LI: Line Interrupt flag - * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag - * @arg LTDC_IT_TE: Transfer Error interrupt flag - * @arg LTDC_IT_RR: Register Reload Interrupt Flag - * @retval None - */ -#define __HAL_LTDC_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER |= (__INTERRUPT__)) - -/** - * @brief Disables the specified LTDC interrupts. - * @param __HANDLE__: LTDC handle - * @param __INTERRUPT__: specifies the LTDC interrupt sources to be disabled. - * This parameter can be any combination of the following values: - * @arg LTDC_IT_LI: Line Interrupt flag - * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag - * @arg LTDC_IT_TE: Transfer Error interrupt flag - * @arg LTDC_IT_RR: Register Reload Interrupt Flag - * @retval None - */ -#define __HAL_LTDC_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IER &= ~(__INTERRUPT__)) - -/** - * @brief Checks whether the specified LTDC interrupt has occurred or not. - * @param __HANDLE__: LTDC handle - * @param __INTERRUPT__: specifies the LTDC interrupt source to check. - * This parameter can be one of the following values: - * @arg LTDC_IT_LI: Line Interrupt flag - * @arg LTDC_IT_FU: FIFO Underrun Interrupt flag - * @arg LTDC_IT_TE: Transfer Error interrupt flag - * @arg LTDC_IT_RR: Register Reload Interrupt Flag - * @retval The state of INTERRUPT (SET or RESET). - */ -#define __HAL_LTDC_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->ISR & (__INTERRUPT__)) -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup LTDC_Exported_Functions - * @{ - */ -/** @addtogroup LTDC_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions *****************************/ -HAL_StatusTypeDef HAL_LTDC_Init(LTDC_HandleTypeDef *hltdc); -HAL_StatusTypeDef HAL_LTDC_DeInit(LTDC_HandleTypeDef *hltdc); -void HAL_LTDC_MspInit(LTDC_HandleTypeDef* hltdc); -void HAL_LTDC_MspDeInit(LTDC_HandleTypeDef* hltdc); -void HAL_LTDC_ErrorCallback(LTDC_HandleTypeDef *hltdc); -void HAL_LTDC_LineEvenCallback(LTDC_HandleTypeDef *hltdc); -/** - * @} - */ - -/** @addtogroup LTDC_Exported_Functions_Group2 - * @{ - */ -/* IO operation functions *****************************************************/ -void HAL_LTDC_IRQHandler(LTDC_HandleTypeDef *hltdc); -/** - * @} - */ - -/** @addtogroup LTDC_Exported_Functions_Group3 - * @{ - */ -/* Peripheral Control functions ***********************************************/ -HAL_StatusTypeDef HAL_LTDC_ConfigLayer(LTDC_HandleTypeDef *hltdc, LTDC_LayerCfgTypeDef *pLayerCfg, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_SetWindowSize(LTDC_HandleTypeDef *hltdc, uint32_t XSize, uint32_t YSize, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_SetWindowPosition(LTDC_HandleTypeDef *hltdc, uint32_t X0, uint32_t Y0, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_SetPixelFormat(LTDC_HandleTypeDef *hltdc, uint32_t Pixelformat, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_SetAlpha(LTDC_HandleTypeDef *hltdc, uint32_t Alpha, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_SetAddress(LTDC_HandleTypeDef *hltdc, uint32_t Address, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_ConfigColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t RGBValue, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_ConfigCLUT(LTDC_HandleTypeDef *hltdc, uint32_t *pCLUT, uint32_t CLUTSize, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_EnableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_DisableColorKeying(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_EnableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_DisableCLUT(LTDC_HandleTypeDef *hltdc, uint32_t LayerIdx); -HAL_StatusTypeDef HAL_LTDC_ProgramLineEvent(LTDC_HandleTypeDef *hltdc, uint32_t Line); -HAL_StatusTypeDef HAL_LTDC_EnableDither(LTDC_HandleTypeDef *hltdc); -HAL_StatusTypeDef HAL_LTDC_DisableDither(LTDC_HandleTypeDef *hltdc); -/** - * @} - */ - -/** @addtogroup LTDC_Exported_Functions_Group4 - * @{ - */ -/* Peripheral State functions *************************************************/ -HAL_LTDC_StateTypeDef HAL_LTDC_GetState(LTDC_HandleTypeDef *hltdc); -uint32_t HAL_LTDC_GetError(LTDC_HandleTypeDef *hltdc); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/** @defgroup LTDC_Private_Types LTDC Private Types - * @{ - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup LTDC_Private_Variables LTDC Private Variables - * @{ - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup LTDC_Private_Constants LTDC Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup LTDC_Private_Macros LTDC Private Macros - * @{ - */ -#define LTDC_LAYER(__HANDLE__, __LAYER__) ((LTDC_Layer_TypeDef *)((uint32_t)(((uint32_t)((__HANDLE__)->Instance)) + 0x84 + (0x80*(__LAYER__))))) -#define IS_LTDC_LAYER(LAYER) ((LAYER) <= MAX_LAYER) -#define IS_LTDC_HSPOL(HSPOL) (((HSPOL) == LTDC_HSPOLARITY_AL) || \ - ((HSPOL) == LTDC_HSPOLARITY_AH)) -#define IS_LTDC_VSPOL(VSPOL) (((VSPOL) == LTDC_VSPOLARITY_AL) || \ - ((VSPOL) == LTDC_VSPOLARITY_AH)) -#define IS_LTDC_DEPOL(DEPOL) (((DEPOL) == LTDC_DEPOLARITY_AL) || \ - ((DEPOL) == LTDC_DEPOLARITY_AH)) -#define IS_LTDC_PCPOL(PCPOL) (((PCPOL) == LTDC_PCPOLARITY_IPC) || \ - ((PCPOL) == LTDC_PCPOLARITY_IIPC)) -#define IS_LTDC_HSYNC(HSYNC) ((HSYNC) <= LTDC_HORIZONTALSYNC) -#define IS_LTDC_VSYNC(VSYNC) ((VSYNC) <= LTDC_VERTICALSYNC) -#define IS_LTDC_AHBP(AHBP) ((AHBP) <= LTDC_HORIZONTALSYNC) -#define IS_LTDC_AVBP(AVBP) ((AVBP) <= LTDC_VERTICALSYNC) -#define IS_LTDC_AAW(AAW) ((AAW) <= LTDC_HORIZONTALSYNC) -#define IS_LTDC_AAH(AAH) ((AAH) <= LTDC_VERTICALSYNC) -#define IS_LTDC_TOTALW(TOTALW) ((TOTALW) <= LTDC_HORIZONTALSYNC) -#define IS_LTDC_TOTALH(TOTALH) ((TOTALH) <= LTDC_VERTICALSYNC) -#define IS_LTDC_BLUEVALUE(BBLUE) ((BBLUE) <= LTDC_COLOR) -#define IS_LTDC_GREENVALUE(BGREEN) ((BGREEN) <= LTDC_COLOR) -#define IS_LTDC_REDVALUE(BRED) ((BRED) <= LTDC_COLOR) -#define IS_LTDC_BLENDING_FACTOR1(BlendingFactor1) (((BlendingFactor1) == LTDC_BLENDING_FACTOR1_CA) || \ - ((BlendingFactor1) == LTDC_BLENDING_FACTOR1_PAxCA)) -#define IS_LTDC_BLENDING_FACTOR2(BlendingFactor2) (((BlendingFactor2) == LTDC_BLENDING_FACTOR2_CA) || \ - ((BlendingFactor2) == LTDC_BLENDING_FACTOR2_PAxCA)) -#define IS_LTDC_PIXEL_FORMAT(Pixelformat) (((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB8888) || ((Pixelformat) == LTDC_PIXEL_FORMAT_RGB888) || \ - ((Pixelformat) == LTDC_PIXEL_FORMAT_RGB565) || ((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB1555) || \ - ((Pixelformat) == LTDC_PIXEL_FORMAT_ARGB4444) || ((Pixelformat) == LTDC_PIXEL_FORMAT_L8) || \ - ((Pixelformat) == LTDC_PIXEL_FORMAT_AL44) || ((Pixelformat) == LTDC_PIXEL_FORMAT_AL88)) -#define IS_LTDC_ALPHA(ALPHA) ((ALPHA) <= LTDC_ALPHA) -#define IS_LTDC_HCONFIGST(HCONFIGST) ((HCONFIGST) <= LTDC_STARTPOSITION) -#define IS_LTDC_HCONFIGSP(HCONFIGSP) ((HCONFIGSP) <= LTDC_STOPPOSITION) -#define IS_LTDC_VCONFIGST(VCONFIGST) ((VCONFIGST) <= LTDC_STARTPOSITION) -#define IS_LTDC_VCONFIGSP(VCONFIGSP) ((VCONFIGSP) <= LTDC_STOPPOSITION) -#define IS_LTDC_CFBP(CFBP) ((CFBP) <= LTDC_COLOR_FRAME_BUFFER) -#define IS_LTDC_CFBLL(CFBLL) ((CFBLL) <= LTDC_COLOR_FRAME_BUFFER) -#define IS_LTDC_CFBLNBR(CFBLNBR) ((CFBLNBR) <= LTDC_LINE_NUMBER) -#define IS_LTDC_LIPOS(LIPOS) ((LIPOS) <= 0x7FF) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup LTDC_Private_Functions LTDC Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32F429xx || STM32F439xx */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_LTDC_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nand.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nand.h deleted file mode 100644 index 7e11d7c..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nand.h +++ /dev/null @@ -1,316 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_nand.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of NAND HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_NAND_H -#define __STM32F4xx_HAL_NAND_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) - #include "stm32f4xx_ll_fsmc.h" -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) - #include "stm32f4xx_ll_fmc.h" -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */ - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup NAND - * @{ - */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) - -/* Exported typedef ----------------------------------------------------------*/ -/* Exported types ------------------------------------------------------------*/ -/** @defgroup NAND_Exported_Types NAND Exported Types - * @{ - */ - -/** - * @brief HAL NAND State structures definition - */ -typedef enum -{ - HAL_NAND_STATE_RESET = 0x00, /*!< NAND not yet initialized or disabled */ - HAL_NAND_STATE_READY = 0x01, /*!< NAND initialized and ready for use */ - HAL_NAND_STATE_BUSY = 0x02, /*!< NAND internal process is ongoing */ - HAL_NAND_STATE_ERROR = 0x03 /*!< NAND error state */ -}HAL_NAND_StateTypeDef; - -/** - * @brief NAND Memory electronic signature Structure definition - */ -typedef struct -{ - /*<! NAND memory electronic signature maker and device IDs */ - - uint8_t Maker_Id; - - uint8_t Device_Id; - - uint8_t Third_Id; - - uint8_t Fourth_Id; -}NAND_IDTypeDef; - -/** - * @brief NAND Memory address Structure definition - */ -typedef struct -{ - uint16_t Page; /*!< NAND memory Page address */ - - uint16_t Zone; /*!< NAND memory Zone address */ - - uint16_t Block; /*!< NAND memory Block address */ - -}NAND_AddressTypeDef; - -/** - * @brief NAND Memory info Structure definition - */ -typedef struct -{ - uint32_t PageSize; /*!< NAND memory page (without spare area) size measured in K. bytes */ - - uint32_t SpareAreaSize; /*!< NAND memory spare area size measured in K. bytes */ - - uint32_t BlockSize; /*!< NAND memory block size number of pages */ - - uint32_t BlockNbr; /*!< NAND memory number of blocks */ - - uint32_t ZoneSize; /*!< NAND memory zone size measured in number of blocks */ -}NAND_InfoTypeDef; - -/** - * @brief NAND handle Structure definition - */ -typedef struct -{ - FMC_NAND_TypeDef *Instance; /*!< Register base address */ - - FMC_NAND_InitTypeDef Init; /*!< NAND device control configuration parameters */ - - HAL_LockTypeDef Lock; /*!< NAND locking object */ - - __IO HAL_NAND_StateTypeDef State; /*!< NAND device access state */ - - NAND_InfoTypeDef Info; /*!< NAND characteristic information structure */ -}NAND_HandleTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/* Exported macros ------------------------------------------------------------*/ -/** @defgroup NAND_Exported_Macros NAND Exported Macros - * @{ - */ - -/** @brief Reset NAND handle state - * @param __HANDLE__: specifies the NAND handle. - * @retval None - */ -#define __HAL_NAND_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NAND_STATE_RESET) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup NAND_Exported_Functions NAND Exported Functions - * @{ - */ - -/** @addtogroup NAND_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ - -/* Initialization/de-initialization functions ********************************/ -HAL_StatusTypeDef HAL_NAND_Init(NAND_HandleTypeDef *hnand, FMC_NAND_PCC_TimingTypeDef *ComSpace_Timing, FMC_NAND_PCC_TimingTypeDef *AttSpace_Timing); -HAL_StatusTypeDef HAL_NAND_DeInit(NAND_HandleTypeDef *hnand); -void HAL_NAND_MspInit(NAND_HandleTypeDef *hnand); -void HAL_NAND_MspDeInit(NAND_HandleTypeDef *hnand); -void HAL_NAND_IRQHandler(NAND_HandleTypeDef *hnand); -void HAL_NAND_ITCallback(NAND_HandleTypeDef *hnand); - -/** - * @} - */ - -/** @addtogroup NAND_Exported_Functions_Group2 Input and Output functions - * @{ - */ - -/* IO operation functions ****************************************************/ -HAL_StatusTypeDef HAL_NAND_Read_ID(NAND_HandleTypeDef *hnand, NAND_IDTypeDef *pNAND_ID); -HAL_StatusTypeDef HAL_NAND_Reset(NAND_HandleTypeDef *hnand); -HAL_StatusTypeDef HAL_NAND_Read_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToRead); -HAL_StatusTypeDef HAL_NAND_Write_Page(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumPageToWrite); -HAL_StatusTypeDef HAL_NAND_Read_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaToRead); -HAL_StatusTypeDef HAL_NAND_Write_SpareArea(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress, uint8_t *pBuffer, uint32_t NumSpareAreaTowrite); -HAL_StatusTypeDef HAL_NAND_Erase_Block(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress); -uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand); -uint32_t HAL_NAND_Address_Inc(NAND_HandleTypeDef *hnand, NAND_AddressTypeDef *pAddress); - -/** - * @} - */ - -/** @addtogroup NAND_Exported_Functions_Group3 Peripheral Control functions - * @{ - */ - -/* NAND Control functions ****************************************************/ -HAL_StatusTypeDef HAL_NAND_ECC_Enable(NAND_HandleTypeDef *hnand); -HAL_StatusTypeDef HAL_NAND_ECC_Disable(NAND_HandleTypeDef *hnand); -HAL_StatusTypeDef HAL_NAND_GetECC(NAND_HandleTypeDef *hnand, uint32_t *ECCval, uint32_t Timeout); - -/** - * @} - */ - -/** @addtogroup NAND_Exported_Functions_Group4 Peripheral State functions - * @{ - */ -/* NAND State functions *******************************************************/ -HAL_NAND_StateTypeDef HAL_NAND_GetState(NAND_HandleTypeDef *hnand); -uint32_t HAL_NAND_Read_Status(NAND_HandleTypeDef *hnand); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup NAND_Private_Constants NAND Private Constants - * @{ - */ -#define NAND_DEVICE1 ((uint32_t)0x70000000) -#define NAND_DEVICE2 ((uint32_t)0x80000000) -#define NAND_WRITE_TIMEOUT ((uint32_t)0x01000000) - -#define CMD_AREA ((uint32_t)(1<<16)) /* A16 = CLE high */ -#define ADDR_AREA ((uint32_t)(1<<17)) /* A17 = ALE high */ - -#define NAND_CMD_AREA_A ((uint8_t)0x00) -#define NAND_CMD_AREA_B ((uint8_t)0x01) -#define NAND_CMD_AREA_C ((uint8_t)0x50) -#define NAND_CMD_AREA_TRUE1 ((uint8_t)0x30) - -#define NAND_CMD_WRITE0 ((uint8_t)0x80) -#define NAND_CMD_WRITE_TRUE1 ((uint8_t)0x10) -#define NAND_CMD_ERASE0 ((uint8_t)0x60) -#define NAND_CMD_ERASE1 ((uint8_t)0xD0) -#define NAND_CMD_READID ((uint8_t)0x90) -#define NAND_CMD_STATUS ((uint8_t)0x70) -#define NAND_CMD_LOCK_STATUS ((uint8_t)0x7A) -#define NAND_CMD_RESET ((uint8_t)0xFF) - -/* NAND memory status */ -#define NAND_VALID_ADDRESS ((uint32_t)0x00000100) -#define NAND_INVALID_ADDRESS ((uint32_t)0x00000200) -#define NAND_TIMEOUT_ERROR ((uint32_t)0x00000400) -#define NAND_BUSY ((uint32_t)0x00000000) -#define NAND_ERROR ((uint32_t)0x00000001) -#define NAND_READY ((uint32_t)0x00000040) -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup NAND_Private_Macros NAND Private Macros - * @{ - */ - -/** - * @brief NAND memory address computation. - * @param __ADDRESS__: NAND memory address. - * @param __HANDLE__ : NAND handle. - * @retval NAND Raw address value - */ -#define ARRAY_ADDRESS(__ADDRESS__ , __HANDLE__) ((__ADDRESS__)->Page + \ - (((__ADDRESS__)->Block + (((__ADDRESS__)->Zone) * ((__HANDLE__)->Info.ZoneSize)))* ((__HANDLE__)->Info.BlockSize))) - -/** - * @brief NAND memory address cycling. - * @param __ADDRESS__: NAND memory address. - * @retval NAND address cycling value. - */ -#define ADDR_1ST_CYCLE(__ADDRESS__) (uint8_t)(__ADDRESS__) /* 1st addressing cycle */ -#define ADDR_2ND_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 8) /* 2nd addressing cycle */ -#define ADDR_3RD_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 16) /* 3rd addressing cycle */ -#define ADDR_4TH_CYCLE(__ADDRESS__) (uint8_t)((__ADDRESS__) >> 24) /* 4th addressing cycle */ -/** - * @} - */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\ - STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\ - STM32F446xx */ - -/** - * @} - */ -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_NAND_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nor.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nor.h deleted file mode 100644 index b104eed..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_nor.h +++ /dev/null @@ -1,301 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_nor.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of NOR HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_NOR_H -#define __STM32F4xx_HAL_NOR_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) - #include "stm32f4xx_ll_fsmc.h" -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) - #include "stm32f4xx_ll_fmc.h" -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */ - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup NOR - * @{ - */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) - -/* Exported typedef ----------------------------------------------------------*/ -/** @defgroup NOR_Exported_Types NOR Exported Types - * @{ - */ - -/** - * @brief HAL SRAM State structures definition - */ -typedef enum -{ - HAL_NOR_STATE_RESET = 0x00, /*!< NOR not yet initialized or disabled */ - HAL_NOR_STATE_READY = 0x01, /*!< NOR initialized and ready for use */ - HAL_NOR_STATE_BUSY = 0x02, /*!< NOR internal processing is ongoing */ - HAL_NOR_STATE_ERROR = 0x03, /*!< NOR error state */ - HAL_NOR_STATE_PROTECTED = 0x04 /*!< NOR NORSRAM device write protected */ -}HAL_NOR_StateTypeDef; - -/** - * @brief FMC NOR Status typedef - */ -typedef enum -{ - HAL_NOR_STATUS_SUCCESS = 0, - HAL_NOR_STATUS_ONGOING, - HAL_NOR_STATUS_ERROR, - HAL_NOR_STATUS_TIMEOUT -}HAL_NOR_StatusTypeDef; - -/** - * @brief FMC NOR ID typedef - */ -typedef struct -{ - uint16_t Manufacturer_Code; /*!< Defines the device's manufacturer code used to identify the memory */ - - uint16_t Device_Code1; - - uint16_t Device_Code2; - - uint16_t Device_Code3; /*!< Defines the device's codes used to identify the memory. - These codes can be accessed by performing read operations with specific - control signals and addresses set.They can also be accessed by issuing - an Auto Select command */ -}NOR_IDTypeDef; - -/** - * @brief FMC NOR CFI typedef - */ -typedef struct -{ - /*!< Defines the information stored in the memory's Common flash interface - which contains a description of various electrical and timing parameters, - density information and functions supported by the memory */ - - uint16_t CFI_1; - - uint16_t CFI_2; - - uint16_t CFI_3; - - uint16_t CFI_4; -}NOR_CFITypeDef; - -/** - * @brief NOR handle Structure definition - */ -typedef struct -{ - FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */ - - FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */ - - FMC_NORSRAM_InitTypeDef Init; /*!< NOR device control configuration parameters */ - - HAL_LockTypeDef Lock; /*!< NOR locking object */ - - __IO HAL_NOR_StateTypeDef State; /*!< NOR device access state */ - -}NOR_HandleTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/* Exported macros ------------------------------------------------------------*/ -/** @defgroup NOR_Exported_Macros NOR Exported Macros - * @{ - */ -/** @brief Reset NOR handle state - * @param __HANDLE__: specifies the NOR handle. - * @retval None - */ -#define __HAL_NOR_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_NOR_STATE_RESET) -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup NOR_Exported_Functions - * @{ - */ - -/** @addtogroup NOR_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions ********************************/ -HAL_StatusTypeDef HAL_NOR_Init(NOR_HandleTypeDef *hnor, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming); -HAL_StatusTypeDef HAL_NOR_DeInit(NOR_HandleTypeDef *hnor); -void HAL_NOR_MspInit(NOR_HandleTypeDef *hnor); -void HAL_NOR_MspDeInit(NOR_HandleTypeDef *hnor); -void HAL_NOR_MspWait(NOR_HandleTypeDef *hnor, uint32_t Timeout); -/** - * @} - */ - -/** @addtogroup NOR_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions ***************************************************/ -HAL_StatusTypeDef HAL_NOR_Read_ID(NOR_HandleTypeDef *hnor, NOR_IDTypeDef *pNOR_ID); -HAL_StatusTypeDef HAL_NOR_ReturnToReadMode(NOR_HandleTypeDef *hnor); -HAL_StatusTypeDef HAL_NOR_Read(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData); -HAL_StatusTypeDef HAL_NOR_Program(NOR_HandleTypeDef *hnor, uint32_t *pAddress, uint16_t *pData); - -HAL_StatusTypeDef HAL_NOR_ReadBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize); -HAL_StatusTypeDef HAL_NOR_ProgramBuffer(NOR_HandleTypeDef *hnor, uint32_t uwAddress, uint16_t *pData, uint32_t uwBufferSize); - -HAL_StatusTypeDef HAL_NOR_Erase_Block(NOR_HandleTypeDef *hnor, uint32_t BlockAddress, uint32_t Address); -HAL_StatusTypeDef HAL_NOR_Erase_Chip(NOR_HandleTypeDef *hnor, uint32_t Address); -HAL_StatusTypeDef HAL_NOR_Read_CFI(NOR_HandleTypeDef *hnor, NOR_CFITypeDef *pNOR_CFI); -/** - * @} - */ - -/** @addtogroup NOR_Exported_Functions_Group3 - * @{ - */ -/* NOR Control functions *****************************************************/ -HAL_StatusTypeDef HAL_NOR_WriteOperation_Enable(NOR_HandleTypeDef *hnor); -HAL_StatusTypeDef HAL_NOR_WriteOperation_Disable(NOR_HandleTypeDef *hnor); -/** - * @} - */ - -/** @addtogroup NOR_Exported_Functions_Group4 - * @{ - */ -/* NOR State functions ********************************************************/ -HAL_NOR_StateTypeDef HAL_NOR_GetState(NOR_HandleTypeDef *hnor); -HAL_NOR_StatusTypeDef HAL_NOR_GetStatus(NOR_HandleTypeDef *hnor, uint32_t Address, uint32_t Timeout); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup NOR_Private_Constants NOR Private Constants - * @{ - */ -/* NOR device IDs addresses */ -#define MC_ADDRESS ((uint16_t)0x0000) -#define DEVICE_CODE1_ADDR ((uint16_t)0x0001) -#define DEVICE_CODE2_ADDR ((uint16_t)0x000E) -#define DEVICE_CODE3_ADDR ((uint16_t)0x000F) - -/* NOR CFI IDs addresses */ -#define CFI1_ADDRESS ((uint16_t)0x61) -#define CFI2_ADDRESS ((uint16_t)0x62) -#define CFI3_ADDRESS ((uint16_t)0x63) -#define CFI4_ADDRESS ((uint16_t)0x64) - -/* NOR operation wait timeout */ -#define NOR_TMEOUT ((uint16_t)0xFFFF) - -/* NOR memory data width */ -#define NOR_MEMORY_8B ((uint8_t)0x0) -#define NOR_MEMORY_16B ((uint8_t)0x1) - -/* NOR memory device read/write start address */ -#define NOR_MEMORY_ADRESS1 ((uint32_t)0x60000000) -#define NOR_MEMORY_ADRESS2 ((uint32_t)0x64000000) -#define NOR_MEMORY_ADRESS3 ((uint32_t)0x68000000) -#define NOR_MEMORY_ADRESS4 ((uint32_t)0x6C000000) -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup NOR_Private_Macros NOR Private Macros - * @{ - */ -/** - * @brief NOR memory address shifting. - * @param __NOR_ADDRESS__: NOR base address - * @param NOR_MEMORY_WIDTH: NOR memory width - * @param ADDRESS: NOR memory address - * @retval NOR shifted address value - */ -#define NOR_ADDR_SHIFT(__NOR_ADDRESS__, NOR_MEMORY_WIDTH, ADDRESS) (uint32_t)(((NOR_MEMORY_WIDTH) == NOR_MEMORY_8B)? ((uint32_t)((__NOR_ADDRESS__) + (2 * (ADDRESS)))):\ - ((uint32_t)((__NOR_ADDRESS__) + (ADDRESS)))) - -/** - * @brief NOR memory write data to specified address. - * @param ADDRESS: NOR memory address - * @param DATA: Data to write - * @retval None - */ -#define NOR_WRITE(ADDRESS, DATA) (*(__IO uint16_t *)((uint32_t)(ADDRESS)) = (DATA)) - -/** - * @} - */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\ - STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx ||\ - STM32F446xx */ -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_NOR_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pccard.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pccard.h deleted file mode 100644 index 931d0c0..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pccard.h +++ /dev/null @@ -1,267 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pccard.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of PCCARD HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_PCCARD_H -#define __STM32F4xx_HAL_PCCARD_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) - #include "stm32f4xx_ll_fsmc.h" -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) - #include "stm32f4xx_ll_fmc.h" -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) - -/** @addtogroup PCCARD - * @{ - */ - -/* Exported typedef ----------------------------------------------------------*/ -/** @defgroup PCCARD_Exported_Types PCCARD Exported Types - * @{ - */ - -/** - * @brief HAL PCCARD State structures definition - */ -typedef enum -{ - HAL_PCCARD_STATE_RESET = 0x00, /*!< PCCARD peripheral not yet initialized or disabled */ - HAL_PCCARD_STATE_READY = 0x01, /*!< PCCARD peripheral ready */ - HAL_PCCARD_STATE_BUSY = 0x02, /*!< PCCARD peripheral busy */ - HAL_PCCARD_STATE_ERROR = 0x04 /*!< PCCARD peripheral error */ -}HAL_PCCARD_StateTypeDef; - -typedef enum -{ - HAL_PCCARD_STATUS_SUCCESS = 0, - HAL_PCCARD_STATUS_ONGOING, - HAL_PCCARD_STATUS_ERROR, - HAL_PCCARD_STATUS_TIMEOUT -}HAL_PCCARD_StatusTypeDef; - -/** - * @brief FMC_PCCARD handle Structure definition - */ -typedef struct -{ - FMC_PCCARD_TypeDef *Instance; /*!< Register base address for PCCARD device */ - - FMC_PCCARD_InitTypeDef Init; /*!< PCCARD device control configuration parameters */ - - __IO HAL_PCCARD_StateTypeDef State; /*!< PCCARD device access state */ - - HAL_LockTypeDef Lock; /*!< PCCARD Lock */ - -}PCCARD_HandleTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup PCCARD_Exported_Macros PCCARD Exported Macros - * @{ - */ -/** @brief Reset PCCARD handle state - * @param __HANDLE__: specifies the PCCARD handle. - * @retval None - */ -#define __HAL_PCCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_PCCARD_STATE_RESET) -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PCCARD_Exported_Functions - * @{ - */ - -/** @addtogroup PCCARD_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions **********************************/ -HAL_StatusTypeDef HAL_PCCARD_Init(PCCARD_HandleTypeDef *hpccard, FMC_NAND_PCC_TimingTypeDef *ComSpaceTiming, FMC_NAND_PCC_TimingTypeDef *AttSpaceTiming, FMC_NAND_PCC_TimingTypeDef *IOSpaceTiming); -HAL_StatusTypeDef HAL_PCCARD_DeInit(PCCARD_HandleTypeDef *hpccard); -void HAL_PCCARD_MspInit(PCCARD_HandleTypeDef *hpccard); -void HAL_PCCARD_MspDeInit(PCCARD_HandleTypeDef *hpccard); -/** - * @} - */ - -/** @addtogroup PCCARD_Exported_Functions_Group2 - * @{ - */ -/* IO operation functions *****************************************************/ -HAL_StatusTypeDef HAL_PCCARD_Read_ID(PCCARD_HandleTypeDef *hpccard, uint8_t CompactFlash_ID[], uint8_t *pStatus); -HAL_StatusTypeDef HAL_PCCARD_Write_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus); -HAL_StatusTypeDef HAL_PCCARD_Read_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t *pBuffer, uint16_t SectorAddress, uint8_t *pStatus); -HAL_StatusTypeDef HAL_PCCARD_Erase_Sector(PCCARD_HandleTypeDef *hpccard, uint16_t SectorAddress, uint8_t *pStatus); -HAL_StatusTypeDef HAL_PCCARD_Reset(PCCARD_HandleTypeDef *hpccard); -void HAL_PCCARD_IRQHandler(PCCARD_HandleTypeDef *hpccard); -void HAL_PCCARD_ITCallback(PCCARD_HandleTypeDef *hpccard); - -/** - * @} - */ - -/** @addtogroup PCCARD_Exported_Functions_Group3 - * @{ - */ -/* PCCARD State functions *******************************************************/ -HAL_PCCARD_StateTypeDef HAL_PCCARD_GetState(PCCARD_HandleTypeDef *hpccard); -HAL_PCCARD_StatusTypeDef HAL_PCCARD_GetStatus(PCCARD_HandleTypeDef *hpccard); -HAL_PCCARD_StatusTypeDef HAL_PCCARD_ReadStatus(PCCARD_HandleTypeDef *hpccard); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup PCCARD_Private_Constants PCCARD Private Constants - * @{ - */ -#define PCCARD_DEVICE_ADDRESS ((uint32_t)0x90000000) -#define PCCARD_ATTRIBUTE_SPACE_ADDRESS ((uint32_t)0x98000000) /* Attribute space size to @0x9BFF FFFF */ -#define PCCARD_COMMON_SPACE_ADDRESS PCCARD_DEVICE_ADDRESS /* Common space size to @0x93FF FFFF */ -#define PCCARD_IO_SPACE_ADDRESS ((uint32_t)0x9C000000) /* IO space size to @0x9FFF FFFF */ -#define PCCARD_IO_SPACE_PRIMARY_ADDR ((uint32_t)0x9C0001F0) /* IO space size to @0x9FFF FFFF */ - -/* Flash-ATA registers description */ -#define ATA_DATA ((uint8_t)0x00) /* Data register */ -#define ATA_SECTOR_COUNT ((uint8_t)0x02) /* Sector Count register */ -#define ATA_SECTOR_NUMBER ((uint8_t)0x03) /* Sector Number register */ -#define ATA_CYLINDER_LOW ((uint8_t)0x04) /* Cylinder low register */ -#define ATA_CYLINDER_HIGH ((uint8_t)0x05) /* Cylinder high register */ -#define ATA_CARD_HEAD ((uint8_t)0x06) /* Card/Head register */ -#define ATA_STATUS_CMD ((uint8_t)0x07) /* Status(read)/Command(write) register */ -#define ATA_STATUS_CMD_ALTERNATE ((uint8_t)0x0E) /* Alternate Status(read)/Command(write) register */ -#define ATA_COMMON_DATA_AREA ((uint16_t)0x0400) /* Start of data area (for Common access only!) */ -#define ATA_CARD_CONFIGURATION ((uint16_t)0x0202) /* Card Configuration and Status Register */ - -/* Flash-ATA commands */ -#define ATA_READ_SECTOR_CMD ((uint8_t)0x20) -#define ATA_WRITE_SECTOR_CMD ((uint8_t)0x30) -#define ATA_ERASE_SECTOR_CMD ((uint8_t)0xC0) -#define ATA_IDENTIFY_CMD ((uint8_t)0xEC) - -/* PC Card/Compact Flash status */ -#define PCCARD_TIMEOUT_ERROR ((uint8_t)0x60) -#define PCCARD_BUSY ((uint8_t)0x80) -#define PCCARD_PROGR ((uint8_t)0x01) -#define PCCARD_READY ((uint8_t)0x40) - -#define PCCARD_SECTOR_SIZE ((uint32_t)255) /* In half words */ - -/** - * @} - */ -/* Compact Flash redefinition */ -#define HAL_CF_Init HAL_PCCARD_Init -#define HAL_CF_DeInit HAL_PCCARD_DeInit -#define HAL_CF_MspInit HAL_PCCARD_MspInit -#define HAL_CF_MspDeInit HAL_PCCARD_MspDeInit - -#define HAL_CF_Read_ID HAL_PCCARD_Read_ID -#define HAL_CF_Write_Sector HAL_PCCARD_Write_Sector -#define HAL_CF_Read_Sector HAL_PCCARD_Read_Sector -#define HAL_CF_Erase_Sector HAL_PCCARD_Erase_Sector -#define HAL_CF_Reset HAL_PCCARD_Reset -#define HAL_CF_IRQHandler HAL_PCCARD_IRQHandler -#define HAL_CF_ITCallback HAL_PCCARD_ITCallback - -#define HAL_CF_GetState HAL_PCCARD_GetState -#define HAL_CF_GetStatus HAL_PCCARD_GetStatus -#define HAL_CF_ReadStatus HAL_PCCARD_ReadStatus - -#define HAL_CF_STATUS_SUCCESS HAL_PCCARD_STATUS_SUCCESS -#define HAL_CF_STATUS_ONGOING HAL_PCCARD_STATUS_ONGOING -#define HAL_CF_STATUS_ERROR HAL_PCCARD_STATUS_ERROR -#define HAL_CF_STATUS_TIMEOUT HAL_PCCARD_STATUS_TIMEOUT -#define HAL_CF_StatusTypeDef HAL_PCCARD_StatusTypeDef - - -#define CF_DEVICE_ADDRESS PCCARD_DEVICE_ADDRESS -#define CF_ATTRIBUTE_SPACE_ADDRESS PCCARD_ATTRIBUTE_SPACE_ADDRESS -#define CF_COMMON_SPACE_ADDRESS PCCARD_COMMON_SPACE_ADDRESS -#define CF_IO_SPACE_ADDRESS PCCARD_IO_SPACE_ADDRESS -#define CF_IO_SPACE_PRIMARY_ADDR PCCARD_IO_SPACE_PRIMARY_ADDR - -#define CF_TIMEOUT_ERROR PCCARD_TIMEOUT_ERROR -#define CF_BUSY PCCARD_BUSY -#define CF_PROGR PCCARD_PROGR -#define CF_READY PCCARD_READY - -#define CF_SECTOR_SIZE PCCARD_SECTOR_SIZE - -/* Private macros ------------------------------------------------------------*/ -/** - * @} - */ - -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx ||\ - STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_PCCARD_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h deleted file mode 100644 index e6b9e57..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd.h +++ /dev/null @@ -1,341 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pcd.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of PCD HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_PCD_H -#define __STM32F4xx_HAL_PCD_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_usb.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup PCD - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup PCD_Exported_Types PCD Exported Types - * @{ - */ - -/** - * @brief PCD State structure definition - */ -typedef enum -{ - HAL_PCD_STATE_RESET = 0x00, - HAL_PCD_STATE_READY = 0x01, - HAL_PCD_STATE_ERROR = 0x02, - HAL_PCD_STATE_BUSY = 0x03, - HAL_PCD_STATE_TIMEOUT = 0x04 -} PCD_StateTypeDef; - -#ifdef USB_OTG_GLPMCFG_LPMEN -/* Device LPM suspend state */ -typedef enum -{ - LPM_L0 = 0x00, /* on */ - LPM_L1 = 0x01, /* LPM L1 sleep */ - LPM_L2 = 0x02, /* suspend */ - LPM_L3 = 0x03, /* off */ -}PCD_LPM_StateTypeDef; -#endif /* USB_OTG_GLPMCFG_LPMEN */ - -typedef USB_OTG_GlobalTypeDef PCD_TypeDef; -typedef USB_OTG_CfgTypeDef PCD_InitTypeDef; -typedef USB_OTG_EPTypeDef PCD_EPTypeDef ; - -/** - * @brief PCD Handle Structure definition - */ -typedef struct -{ - PCD_TypeDef *Instance; /*!< Register base address */ - PCD_InitTypeDef Init; /*!< PCD required parameters */ - PCD_EPTypeDef IN_ep[15]; /*!< IN endpoint parameters */ - PCD_EPTypeDef OUT_ep[15]; /*!< OUT endpoint parameters */ - HAL_LockTypeDef Lock; /*!< PCD peripheral status */ - __IO PCD_StateTypeDef State; /*!< PCD communication state */ - uint32_t Setup[12]; /*!< Setup packet buffer */ -#ifdef USB_OTG_GLPMCFG_LPMEN - PCD_LPM_StateTypeDef LPM_State; /*!< LPM State */ - uint32_t BESL; - uint32_t lpm_active; /*!< Enable or disable the Link Power Management . - This parameter can be set to ENABLE or DISABLE */ -#endif /* USB_OTG_GLPMCFG_LPMEN */ - void *pData; /*!< Pointer to upper stack Handler */ -} PCD_HandleTypeDef; - -/** - * @} - */ - -/* Include PCD HAL Extension module */ -#include "stm32f4xx_hal_pcd_ex.h" - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup PCD_Exported_Constants PCD Exported Constants - * @{ - */ - -/** @defgroup PCD_Speed PCD Speed - * @{ - */ -#define PCD_SPEED_HIGH 0 -#define PCD_SPEED_HIGH_IN_FULL 1 -#define PCD_SPEED_FULL 2 -/** - * @} - */ - -/** @defgroup PCD_PHY_Module PCD PHY Module - * @{ - */ -#define PCD_PHY_ULPI 1 -#define PCD_PHY_EMBEDDED 2 -/** - * @} - */ - -/** @defgroup PCD_Turnaround_Timeout Turnaround Timeout Value - * @{ - */ -#ifndef USBD_HS_TRDT_VALUE - #define USBD_HS_TRDT_VALUE 9 -#endif /* USBD_HS_TRDT_VALUE */ -#ifndef USBD_FS_TRDT_VALUE - #define USBD_FS_TRDT_VALUE 5 -#endif /* USBD_FS_TRDT_VALUE */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup PCD_Exported_Macros PCD Exported Macros - * @brief macros to handle interrupts and specific clock configurations - * @{ - */ -#define __HAL_PCD_ENABLE(__HANDLE__) USB_EnableGlobalInt ((__HANDLE__)->Instance) -#define __HAL_PCD_DISABLE(__HANDLE__) USB_DisableGlobalInt ((__HANDLE__)->Instance) - -#define __HAL_PCD_GET_FLAG(__HANDLE__, __INTERRUPT__) ((USB_ReadInterrupts((__HANDLE__)->Instance) & (__INTERRUPT__)) == (__INTERRUPT__)) -#define __HAL_PCD_CLEAR_FLAG(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->GINTSTS) = (__INTERRUPT__)) -#define __HAL_PCD_IS_INVALID_INTERRUPT(__HANDLE__) (USB_ReadInterrupts((__HANDLE__)->Instance) == 0) - - -#define __HAL_PCD_UNGATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) &= \ - ~(USB_OTG_PCGCCTL_STOPCLK) - -#define __HAL_PCD_GATE_PHYCLOCK(__HANDLE__) *(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE) |= USB_OTG_PCGCCTL_STOPCLK - -#define __HAL_PCD_IS_PHY_SUSPENDED(__HANDLE__) ((*(__IO uint32_t *)((uint32_t)((__HANDLE__)->Instance) + USB_OTG_PCGCCTL_BASE))&0x10) - -#define USB_OTG_FS_WAKEUP_EXTI_RISING_EDGE ((uint32_t)0x08) -#define USB_OTG_FS_WAKEUP_EXTI_FALLING_EDGE ((uint32_t)0x0C) -#define USB_OTG_FS_WAKEUP_EXTI_RISING_FALLING_EDGE ((uint32_t)0x10) - -#define USB_OTG_HS_WAKEUP_EXTI_RISING_EDGE ((uint32_t)0x08) -#define USB_OTG_HS_WAKEUP_EXTI_FALLING_EDGE ((uint32_t)0x0C) -#define USB_OTG_HS_WAKEUP_EXTI_RISING_FALLING_EDGE ((uint32_t)0x10) - -#define USB_OTG_HS_WAKEUP_EXTI_LINE ((uint32_t)0x00100000) /*!< External interrupt line 20 Connected to the USB HS EXTI Line */ -#define USB_OTG_FS_WAKEUP_EXTI_LINE ((uint32_t)0x00040000) /*!< External interrupt line 18 Connected to the USB FS EXTI Line */ - -#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= (USB_OTG_HS_WAKEUP_EXTI_LINE) -#define __HAL_USB_OTG_HS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE) -#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_HS_WAKEUP_EXTI_LINE) -#define __HAL_USB_OTG_HS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = (USB_OTG_HS_WAKEUP_EXTI_LINE) - -#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_EDGE() EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\ - EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE - -#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_FALLING_EDGE() EXTI->FTSR |= (USB_OTG_HS_WAKEUP_EXTI_LINE);\ - EXTI->RTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE) - -#define __HAL_USB_OTG_HS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() EXTI->RTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE);\ - EXTI->FTSR &= ~(USB_OTG_HS_WAKEUP_EXTI_LINE;)\ - EXTI->RTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE;\ - EXTI->FTSR |= USB_OTG_HS_WAKEUP_EXTI_LINE - -#define __HAL_USB_OTG_HS_WAKEUP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE) - -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_IT() EXTI->IMR |= USB_OTG_FS_WAKEUP_EXTI_LINE -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_DISABLE_IT() EXTI->IMR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE) -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GET_FLAG() EXTI->PR & (USB_OTG_FS_WAKEUP_EXTI_LINE) -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_CLEAR_FLAG() EXTI->PR = USB_OTG_FS_WAKEUP_EXTI_LINE - -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_EDGE() EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\ - EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE - - -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_FALLING_EDGE() EXTI->FTSR |= (USB_OTG_FS_WAKEUP_EXTI_LINE);\ - EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE) - -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_ENABLE_RISING_FALLING_EDGE() EXTI->RTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\ - EXTI->FTSR &= ~(USB_OTG_FS_WAKEUP_EXTI_LINE);\ - EXTI->RTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE;\ - EXTI->FTSR |= USB_OTG_FS_WAKEUP_EXTI_LINE - -#define __HAL_USB_OTG_FS_WAKEUP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= USB_OTG_FS_WAKEUP_EXTI_LINE) -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PCD_Exported_Functions PCD Exported Functions - * @{ - */ - -/* Initialization/de-initialization functions ********************************/ -/** @addtogroup PCD_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ -HAL_StatusTypeDef HAL_PCD_Init(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_DeInit(PCD_HandleTypeDef *hpcd); -void HAL_PCD_MspInit(PCD_HandleTypeDef *hpcd); -void HAL_PCD_MspDeInit(PCD_HandleTypeDef *hpcd); -/** - * @} - */ - -/* I/O operation functions ***************************************************/ -/* Non-Blocking mode: Interrupt */ -/** @addtogroup PCD_Exported_Functions_Group2 IO operation functions - * @{ - */ -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_PCD_Start(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_Stop(PCD_HandleTypeDef *hpcd); -void HAL_PCD_IRQHandler(PCD_HandleTypeDef *hpcd); - -void HAL_PCD_DataOutStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); -void HAL_PCD_DataInStageCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); -void HAL_PCD_SetupStageCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_SOFCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_ResetCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_SuspendCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_ResumeCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_ISOOUTIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); -void HAL_PCD_ISOINIncompleteCallback(PCD_HandleTypeDef *hpcd, uint8_t epnum); -void HAL_PCD_ConnectCallback(PCD_HandleTypeDef *hpcd); -void HAL_PCD_DisconnectCallback(PCD_HandleTypeDef *hpcd); -/** - * @} - */ - -/* Peripheral Control functions **********************************************/ -/** @addtogroup PCD_Exported_Functions_Group3 Peripheral Control functions - * @{ - */ -HAL_StatusTypeDef HAL_PCD_DevConnect(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_DevDisconnect(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_SetAddress(PCD_HandleTypeDef *hpcd, uint8_t address); -HAL_StatusTypeDef HAL_PCD_EP_Open(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint16_t ep_mps, uint8_t ep_type); -HAL_StatusTypeDef HAL_PCD_EP_Close(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_EP_Receive(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); -HAL_StatusTypeDef HAL_PCD_EP_Transmit(PCD_HandleTypeDef *hpcd, uint8_t ep_addr, uint8_t *pBuf, uint32_t len); -uint16_t HAL_PCD_EP_GetRxCount(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_EP_SetStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_EP_ClrStall(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_EP_Flush(PCD_HandleTypeDef *hpcd, uint8_t ep_addr); -HAL_StatusTypeDef HAL_PCD_ActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCD_DeActivateRemoteWakeup(PCD_HandleTypeDef *hpcd); -/** - * @} - */ - -/* Peripheral State functions ************************************************/ -/** @addtogroup PCD_Exported_Functions_Group4 Peripheral State functions - * @{ - */ -PCD_StateTypeDef HAL_PCD_GetState(PCD_HandleTypeDef *hpcd); -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup PCD_Private_Macros PCD Private Macros - * @{ - */ -/** @defgroup PCD_Instance_definition PCD Instance definition - * @{ - */ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) || defined(STM32F427xx) || defined(STM32F437xx) ||\ - defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) - #define IS_PCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS) || \ - ((INSTANCE) == USB_OTG_HS)) -#elif defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) - #define IS_PCD_ALL_INSTANCE(INSTANCE) (((INSTANCE) == USB_OTG_FS)) -#endif -/** - * @} - */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_HAL_PCD_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h deleted file mode 100644 index ce67f24..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pcd_ex.h +++ /dev/null @@ -1,105 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pcd_ex.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of PCD HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_PCD_EX_H -#define __STM32F4xx_HAL_PCD_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup PCDEx - * @{ - */ -/* Exported types ------------------------------------------------------------*/ -#if defined(STM32F446xx) -typedef enum -{ - PCD_LPM_L0_ACTIVE = 0x00, /* on */ - PCD_LPM_L1_ACTIVE = 0x01, /* LPM L1 sleep */ -}PCD_LPM_MsgTypeDef; -#endif /* STM32F446xx */ - -/* Exported constants --------------------------------------------------------*/ -/* Exported macros -----------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PCDEx_Exported_Functions PCDEx Exported Functions - * @{ - */ -/** @addtogroup PCDEx_Exported_Functions_Group1 Peripheral Control functions - * @{ - */ -HAL_StatusTypeDef HAL_PCDEx_SetTxFiFo(PCD_HandleTypeDef *hpcd, uint8_t fifo, uint16_t size); -HAL_StatusTypeDef HAL_PCDEx_SetRxFiFo(PCD_HandleTypeDef *hpcd, uint16_t size); -#if defined(STM32F446xx) -HAL_StatusTypeDef HAL_PCDEx_ActivateLPM(PCD_HandleTypeDef *hpcd); -HAL_StatusTypeDef HAL_PCDEx_DeActivateLPM(PCD_HandleTypeDef *hpcd); -void HAL_PCDEx_LPM_Callback(PCD_HandleTypeDef *hpcd, PCD_LPM_MsgTypeDef msg); -#endif /* STM32F446xx */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_HAL_PCD_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h deleted file mode 100644 index e55a384..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr.h +++ /dev/null @@ -1,484 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pwr.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of PWR HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_PWR_H -#define __STM32F4xx_HAL_PWR_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup PWR - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup PWR_Exported_Types PWR Exported Types - * @{ - */ - -/** - * @brief PWR PVD configuration structure definition - */ -typedef struct -{ - uint32_t PVDLevel; /*!< PVDLevel: Specifies the PVD detection level. - This parameter can be a value of @ref PWR_PVD_detection_level */ - - uint32_t Mode; /*!< Mode: Specifies the operating mode for the selected pins. - This parameter can be a value of @ref PWR_PVD_Mode */ -}PWR_PVDTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup PWR_Exported_Constants PWR Exported Constants - * @{ - */ - -/** @defgroup PWR_WakeUp_Pins PWR WakeUp Pins - * @{ - */ -#define PWR_WAKEUP_PIN1 ((uint32_t)0x00000100) -#define PWR_WAKEUP_PIN2 ((uint32_t)0x00000080) -/** - * @} - */ - -/** @defgroup PWR_PVD_detection_level PWR PVD detection level - * @{ - */ -#define PWR_PVDLEVEL_0 PWR_CR_PLS_LEV0 -#define PWR_PVDLEVEL_1 PWR_CR_PLS_LEV1 -#define PWR_PVDLEVEL_2 PWR_CR_PLS_LEV2 -#define PWR_PVDLEVEL_3 PWR_CR_PLS_LEV3 -#define PWR_PVDLEVEL_4 PWR_CR_PLS_LEV4 -#define PWR_PVDLEVEL_5 PWR_CR_PLS_LEV5 -#define PWR_PVDLEVEL_6 PWR_CR_PLS_LEV6 -#define PWR_PVDLEVEL_7 PWR_CR_PLS_LEV7/* External input analog voltage - (Compare internally to VREFINT) */ -/** - * @} - */ - -/** @defgroup PWR_PVD_Mode PWR PVD Mode - * @{ - */ -#define PWR_PVD_MODE_NORMAL ((uint32_t)0x00000000) /*!< basic mode is used */ -#define PWR_PVD_MODE_IT_RISING ((uint32_t)0x00010001) /*!< External Interrupt Mode with Rising edge trigger detection */ -#define PWR_PVD_MODE_IT_FALLING ((uint32_t)0x00010002) /*!< External Interrupt Mode with Falling edge trigger detection */ -#define PWR_PVD_MODE_IT_RISING_FALLING ((uint32_t)0x00010003) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ -#define PWR_PVD_MODE_EVENT_RISING ((uint32_t)0x00020001) /*!< Event Mode with Rising edge trigger detection */ -#define PWR_PVD_MODE_EVENT_FALLING ((uint32_t)0x00020002) /*!< Event Mode with Falling edge trigger detection */ -#define PWR_PVD_MODE_EVENT_RISING_FALLING ((uint32_t)0x00020003) /*!< Event Mode with Rising/Falling edge trigger detection */ -/** - * @} - */ - - -/** @defgroup PWR_Regulator_state_in_STOP_mode PWR Regulator state in SLEEP/STOP mode - * @{ - */ -#define PWR_MAINREGULATOR_ON ((uint32_t)0x00000000) -#define PWR_LOWPOWERREGULATOR_ON PWR_CR_LPDS -/** - * @} - */ - -/** @defgroup PWR_SLEEP_mode_entry PWR SLEEP mode entry - * @{ - */ -#define PWR_SLEEPENTRY_WFI ((uint8_t)0x01) -#define PWR_SLEEPENTRY_WFE ((uint8_t)0x02) -/** - * @} - */ - -/** @defgroup PWR_STOP_mode_entry PWR STOP mode entry - * @{ - */ -#define PWR_STOPENTRY_WFI ((uint8_t)0x01) -#define PWR_STOPENTRY_WFE ((uint8_t)0x02) -/** - * @} - */ - -/** @defgroup PWR_Flag PWR Flag - * @{ - */ -#define PWR_FLAG_WU PWR_CSR_WUF -#define PWR_FLAG_SB PWR_CSR_SBF -#define PWR_FLAG_PVDO PWR_CSR_PVDO -#define PWR_FLAG_BRR PWR_CSR_BRR -#define PWR_FLAG_VOSRDY PWR_CSR_VOSRDY -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup PWR_Exported_Macro PWR Exported Macro - * @{ - */ - -#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) -/** @brief macros configure the main internal regulator output voltage. - * @param __REGULATOR__: specifies the regulator output voltage to achieve - * a tradeoff between performance and power consumption when the device does - * not operate at the maximum frequency (refer to the datasheets for more details). - * This parameter can be one of the following values: - * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode - * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode - * @retval None - */ -#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \ - __IO uint32_t tmpreg; \ - MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \ - UNUSED(tmpreg); \ - } while(0) -#else -/** @brief macros configure the main internal regulator output voltage. - * @param __REGULATOR__: specifies the regulator output voltage to achieve - * a tradeoff between performance and power consumption when the device does - * not operate at the maximum frequency (refer to the datasheets for more details). - * This parameter can be one of the following values: - * @arg PWR_REGULATOR_VOLTAGE_SCALE1: Regulator voltage output Scale 1 mode - * @arg PWR_REGULATOR_VOLTAGE_SCALE2: Regulator voltage output Scale 2 mode - * @arg PWR_REGULATOR_VOLTAGE_SCALE3: Regulator voltage output Scale 3 mode - * @retval None - */ -#define __HAL_PWR_VOLTAGESCALING_CONFIG(__REGULATOR__) do { \ - __IO uint32_t tmpreg; \ - MODIFY_REG(PWR->CR, PWR_CR_VOS, (__REGULATOR__)); \ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(PWR->CR, PWR_CR_VOS); \ - UNUSED(tmpreg); \ - } while(0) -#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */ - -/** @brief Check PWR flag is set or not. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg PWR_FLAG_WU: Wake Up flag. This flag indicates that a wakeup event - * was received from the WKUP pin or from the RTC alarm (Alarm A - * or Alarm B), RTC Tamper event, RTC TimeStamp event or RTC Wakeup. - * An additional wakeup event is detected if the WKUP pin is enabled - * (by setting the EWUP bit) when the WKUP pin level is already high. - * @arg PWR_FLAG_SB: StandBy flag. This flag indicates that the system was - * resumed from StandBy mode. - * @arg PWR_FLAG_PVDO: PVD Output. This flag is valid only if PVD is enabled - * by the HAL_PWR_EnablePVD() function. The PVD is stopped by Standby mode - * For this reason, this bit is equal to 0 after Standby or reset - * until the PVDE bit is set. - * @arg PWR_FLAG_BRR: Backup regulator ready flag. This bit is not reset - * when the device wakes up from Standby mode or by a system reset - * or power reset. - * @arg PWR_FLAG_VOSRDY: This flag indicates that the Regulator voltage - * scaling output selection is ready. - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_PWR_GET_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__)) - -/** @brief Clear the PWR's pending flags. - * @param __FLAG__: specifies the flag to clear. - * This parameter can be one of the following values: - * @arg PWR_FLAG_WU: Wake Up flag - * @arg PWR_FLAG_SB: StandBy flag - */ -#define __HAL_PWR_CLEAR_FLAG(__FLAG__) (PWR->CR |= (__FLAG__) << 2) - -/** - * @brief Enable the PVD Exti Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_IT() (EXTI->IMR |= (PWR_EXTI_LINE_PVD)) - -/** - * @brief Disable the PVD EXTI Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_IT() (EXTI->IMR &= ~(PWR_EXTI_LINE_PVD)) - -/** - * @brief Enable event on PVD Exti Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_EVENT() (EXTI->EMR |= (PWR_EXTI_LINE_PVD)) - -/** - * @brief Disable event on PVD Exti Line 16. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(PWR_EXTI_LINE_PVD)) - -/** - * @brief Enable the PVD Extended Interrupt Rising Trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE() SET_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) - -/** - * @brief Disable the PVD Extended Interrupt Rising Trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE() CLEAR_BIT(EXTI->RTSR, PWR_EXTI_LINE_PVD) - -/** - * @brief Enable the PVD Extended Interrupt Falling Trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE() SET_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) - - -/** - * @brief Disable the PVD Extended Interrupt Falling Trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE() CLEAR_BIT(EXTI->FTSR, PWR_EXTI_LINE_PVD) - - -/** - * @brief PVD EXTI line configuration: set rising & falling edge trigger. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_ENABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_ENABLE_FALLING_EDGE(); - -/** - * @brief Disable the PVD Extended Interrupt Rising & Falling Trigger. - * This parameter can be: - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_PWR_PVD_EXTI_DISABLE_RISING_EDGE();__HAL_PWR_PVD_EXTI_DISABLE_FALLING_EDGE(); - -/** - * @brief checks whether the specified PVD Exti interrupt flag is set or not. - * @retval EXTI PVD Line Status. - */ -#define __HAL_PWR_PVD_EXTI_GET_FLAG() (EXTI->PR & (PWR_EXTI_LINE_PVD)) - -/** - * @brief Clear the PVD Exti flag. - * @retval None. - */ -#define __HAL_PWR_PVD_EXTI_CLEAR_FLAG() (EXTI->PR = (PWR_EXTI_LINE_PVD)) - -/** - * @brief Generates a Software interrupt on PVD EXTI line. - * @retval None - */ -#define __HAL_PWR_PVD_EXTI_GENERATE_SWIT() (EXTI->SWIER |= (PWR_EXTI_LINE_PVD)) - -/** - * @} - */ - -/* Include PWR HAL Extension module */ -#include "stm32f4xx_hal_pwr_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PWR_Exported_Functions PWR Exported Functions - * @{ - */ - -/** @addtogroup PWR_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ -/* Initialization and de-initialization functions *****************************/ -void HAL_PWR_DeInit(void); -void HAL_PWR_EnableBkUpAccess(void); -void HAL_PWR_DisableBkUpAccess(void); -/** - * @} - */ - -/** @addtogroup PWR_Exported_Functions_Group2 Peripheral Control functions - * @{ - */ -/* Peripheral Control functions **********************************************/ -/* PVD configuration */ -void HAL_PWR_ConfigPVD(PWR_PVDTypeDef *sConfigPVD); -void HAL_PWR_EnablePVD(void); -void HAL_PWR_DisablePVD(void); - -/* WakeUp pins configuration */ -void HAL_PWR_EnableWakeUpPin(uint32_t WakeUpPinx); -void HAL_PWR_DisableWakeUpPin(uint32_t WakeUpPinx); - -/* Low Power modes entry */ -void HAL_PWR_EnterSTOPMode(uint32_t Regulator, uint8_t STOPEntry); -void HAL_PWR_EnterSLEEPMode(uint32_t Regulator, uint8_t SLEEPEntry); -void HAL_PWR_EnterSTANDBYMode(void); - -/* Power PVD IRQ Handler */ -void HAL_PWR_PVD_IRQHandler(void); -void HAL_PWR_PVDCallback(void); - -/* Cortex System Control functions *******************************************/ -void HAL_PWR_EnableSleepOnExit(void); -void HAL_PWR_DisableSleepOnExit(void); -void HAL_PWR_EnableSEVOnPend(void); -void HAL_PWR_DisableSEVOnPend(void); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup PWR_Private_Constants PWR Private Constants - * @{ - */ - -/** @defgroup PWR_PVD_EXTI_Line PWR PVD EXTI Line - * @{ - */ -#define PWR_EXTI_LINE_PVD ((uint32_t)EXTI_IMR_MR16) /*!< External interrupt line 16 Connected to the PVD EXTI Line */ -/** - * @} - */ - -/** @defgroup PWR_register_alias_address PWR Register alias address - * @{ - */ -/* ------------- PWR registers bit address in the alias region ---------------*/ -#define PWR_OFFSET (PWR_BASE - PERIPH_BASE) -#define PWR_CR_OFFSET 0x00 -#define PWR_CSR_OFFSET 0x04 -#define PWR_CR_OFFSET_BB (PWR_OFFSET + PWR_CR_OFFSET) -#define PWR_CSR_OFFSET_BB (PWR_OFFSET + PWR_CSR_OFFSET) -/** - * @} - */ - -/** @defgroup PWR_CR_register_alias PWR CR Register alias address - * @{ - */ -/* --- CR Register ---*/ -/* Alias word address of DBP bit */ -#define DBP_BIT_NUMBER POSITION_VAL(PWR_CR_DBP) -#define CR_DBP_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (DBP_BIT_NUMBER * 4)) - -/* Alias word address of PVDE bit */ -#define PVDE_BIT_NUMBER POSITION_VAL(PWR_CR_PVDE) -#define CR_PVDE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (PVDE_BIT_NUMBER * 4)) - -/* Alias word address of PMODE bit */ -#define PMODE_BIT_NUMBER POSITION_VAL(PWR_CR_PMODE) -#define CR_PMODE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (PMODE_BIT_NUMBER * 4)) -/** - * @} - */ - -/** @defgroup PWR_CSR_register_alias PWR CSR Register alias address - * @{ - */ -/* --- CSR Register ---*/ -/* Alias word address of EWUP bit */ -#define EWUP_BIT_NUMBER POSITION_VAL(PWR_CSR_EWUP) -#define CSR_EWUP_BB (PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32) + (EWUP_BIT_NUMBER * 4)) -/** - * @} - */ - -/** - * @} - */ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup PWR_Private_Macros PWR Private Macros - * @{ - */ - -/** @defgroup PWR_IS_PWR_Definitions PWR Private macros to check input parameters - * @{ - */ -#define IS_PWR_WAKEUP_PIN(PIN) (((PIN) == PWR_WAKEUP_PIN1) || ((PIN) == PWR_WAKEUP_PIN2)) -#define IS_PWR_PVD_LEVEL(LEVEL) (((LEVEL) == PWR_PVDLEVEL_0) || ((LEVEL) == PWR_PVDLEVEL_1)|| \ - ((LEVEL) == PWR_PVDLEVEL_2) || ((LEVEL) == PWR_PVDLEVEL_3)|| \ - ((LEVEL) == PWR_PVDLEVEL_4) || ((LEVEL) == PWR_PVDLEVEL_5)|| \ - ((LEVEL) == PWR_PVDLEVEL_6) || ((LEVEL) == PWR_PVDLEVEL_7)) -#define IS_PWR_PVD_MODE(MODE) (((MODE) == PWR_PVD_MODE_IT_RISING)|| ((MODE) == PWR_PVD_MODE_IT_FALLING) || \ - ((MODE) == PWR_PVD_MODE_IT_RISING_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING) || \ - ((MODE) == PWR_PVD_MODE_EVENT_FALLING) || ((MODE) == PWR_PVD_MODE_EVENT_RISING_FALLING) || \ - ((MODE) == PWR_PVD_MODE_NORMAL)) -#define IS_PWR_REGULATOR(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_ON) || \ - ((REGULATOR) == PWR_LOWPOWERREGULATOR_ON)) -#define IS_PWR_SLEEP_ENTRY(ENTRY) (((ENTRY) == PWR_SLEEPENTRY_WFI) || ((ENTRY) == PWR_SLEEPENTRY_WFE)) -#define IS_PWR_STOP_ENTRY(ENTRY) (((ENTRY) == PWR_STOPENTRY_WFI) || ((ENTRY) == PWR_STOPENTRY_WFE)) -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_HAL_PWR_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h deleted file mode 100644 index 73d9d88..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_pwr_ex.h +++ /dev/null @@ -1,291 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_pwr_ex.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of PWR HAL Extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_PWR_EX_H -#define __STM32F4xx_HAL_PWR_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup PWREx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/** @defgroup PWREx_Exported_Constants PWREx Exported Constants - * @{ - */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) - -/** @defgroup PWREx_Regulator_state_in_UnderDrive_mode PWREx Regulator state in UnderDrive mode - * @{ - */ -#define PWR_MAINREGULATOR_UNDERDRIVE_ON PWR_CR_MRUDS -#define PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON ((uint32_t)(PWR_CR_LPDS | PWR_CR_LPUDS)) -/** - * @} - */ - -/** @defgroup PWREx_Over_Under_Drive_Flag PWREx Over Under Drive Flag - * @{ - */ -#define PWR_FLAG_ODRDY PWR_CSR_ODRDY -#define PWR_FLAG_ODSWRDY PWR_CSR_ODSWRDY -#define PWR_FLAG_UDRDY PWR_CSR_UDSWRDY -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */ - -/** @defgroup PWR_Regulator_Voltage_Scale PWR Regulator Voltage Scale - * @{ - */ -#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) -#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK = 168 MHz. */ -#define PWR_REGULATOR_VOLTAGE_SCALE2 ((uint32_t)0x00000000) /* Scale 2 mode: the maximum value of fHCLK = 144 MHz. */ -#else -#define PWR_REGULATOR_VOLTAGE_SCALE1 PWR_CR_VOS /* Scale 1 mode(default value at reset): the maximum value of fHCLK is 168 MHz. It can be extended to - 180 MHz by activating the over-drive mode. */ -#define PWR_REGULATOR_VOLTAGE_SCALE2 PWR_CR_VOS_1 /* Scale 2 mode: the maximum value of fHCLK is 144 MHz. It can be extended to - 168 MHz by activating the over-drive mode. */ -#define PWR_REGULATOR_VOLTAGE_SCALE3 PWR_CR_VOS_0 /* Scale 3 mode: the maximum value of fHCLK is 120 MHz. */ -#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup PWREx_Exported_Constants PWREx Exported Constants - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) -/** @brief Macros to enable or disable the Over drive mode. - * @note These macros can be used only for STM32F42xx/STM3243xx devices. - */ -#define __HAL_PWR_OVERDRIVE_ENABLE() (*(__IO uint32_t *) CR_ODEN_BB = ENABLE) -#define __HAL_PWR_OVERDRIVE_DISABLE() (*(__IO uint32_t *) CR_ODEN_BB = DISABLE) - -/** @brief Macros to enable or disable the Over drive switching. - * @note These macros can be used only for STM32F42xx/STM3243xx devices. - */ -#define __HAL_PWR_OVERDRIVESWITCHING_ENABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = ENABLE) -#define __HAL_PWR_OVERDRIVESWITCHING_DISABLE() (*(__IO uint32_t *) CR_ODSWEN_BB = DISABLE) - -/** @brief Macros to enable or disable the Under drive mode. - * @note This mode is enabled only with STOP low power mode. - * In this mode, the 1.2V domain is preserved in reduced leakage mode. This - * mode is only available when the main regulator or the low power regulator - * is in low voltage mode. - * @note If the Under-drive mode was enabled, it is automatically disabled after - * exiting Stop mode. - * When the voltage regulator operates in Under-drive mode, an additional - * startup delay is induced when waking up from Stop mode. - */ -#define __HAL_PWR_UNDERDRIVE_ENABLE() (PWR->CR |= (uint32_t)PWR_CR_UDEN) -#define __HAL_PWR_UNDERDRIVE_DISABLE() (PWR->CR &= (uint32_t)(~PWR_CR_UDEN)) - -/** @brief Check PWR flag is set or not. - * @note These macros can be used only for STM32F42xx/STM3243xx devices. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg PWR_FLAG_ODRDY: This flag indicates that the Over-drive mode - * is ready - * @arg PWR_FLAG_ODSWRDY: This flag indicates that the Over-drive mode - * switching is ready - * @arg PWR_FLAG_UDRDY: This flag indicates that the Under-drive mode - * is enabled in Stop mode - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_PWR_GET_ODRUDR_FLAG(__FLAG__) ((PWR->CSR & (__FLAG__)) == (__FLAG__)) - -/** @brief Clear the Under-Drive Ready flag. - * @note These macros can be used only for STM32F42xx/STM3243xx devices. - */ -#define __HAL_PWR_CLEAR_ODRUDR_FLAG() (PWR->CSR |= PWR_FLAG_UDRDY) - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */ -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup PWREx_Exported_Functions PWREx Exported Functions - * @{ - */ - -/** @addtogroup PWREx_Exported_Functions_Group1 - * @{ - */ -void HAL_PWREx_EnableFlashPowerDown(void); -void HAL_PWREx_DisableFlashPowerDown(void); -HAL_StatusTypeDef HAL_PWREx_EnableBkUpReg(void); -HAL_StatusTypeDef HAL_PWREx_DisableBkUpReg(void); -uint32_t HAL_PWREx_GetVoltageRange(void); -HAL_StatusTypeDef HAL_PWREx_ControlVoltageScaling(uint32_t VoltageScaling); - -#if defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -void HAL_PWREx_EnableMainRegulatorLowVoltage(void); -void HAL_PWREx_DisableMainRegulatorLowVoltage(void); -void HAL_PWREx_EnableLowRegulatorLowVoltage(void); -void HAL_PWREx_DisableLowRegulatorLowVoltage(void); -#endif /* STM32F401xC || STM32F401xE || STM32F411xE */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) -HAL_StatusTypeDef HAL_PWREx_EnableOverDrive(void); -HAL_StatusTypeDef HAL_PWREx_DisableOverDrive(void); -HAL_StatusTypeDef HAL_PWREx_EnterUnderDriveSTOPMode(uint32_t Regulator, uint8_t STOPEntry); -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */ - -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup PWREx_Private_Constants PWREx Private Constants - * @{ - */ - -/** @defgroup PWREx_register_alias_address PWREx Register alias address - * @{ - */ -/* ------------- PWR registers bit address in the alias region ---------------*/ -/* --- CR Register ---*/ -/* Alias word address of FPDS bit */ -#define FPDS_BIT_NUMBER POSITION_VAL(PWR_CR_FPDS) -#define CR_FPDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (FPDS_BIT_NUMBER * 4)) - -/* Alias word address of ODEN bit */ -#define ODEN_BIT_NUMBER POSITION_VAL(PWR_CR_ODEN) -#define CR_ODEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (ODEN_BIT_NUMBER * 4)) - -/* Alias word address of ODSWEN bit */ -#define ODSWEN_BIT_NUMBER POSITION_VAL(PWR_CR_ODSWEN) -#define CR_ODSWEN_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (ODSWEN_BIT_NUMBER * 4)) - -/* Alias word address of MRLVDS bit */ -#define MRLVDS_BIT_NUMBER POSITION_VAL(PWR_CR_MRLVDS) -#define CR_MRLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (MRLVDS_BIT_NUMBER * 4)) - -/* Alias word address of LPLVDS bit */ -#define LPLVDS_BIT_NUMBER POSITION_VAL(PWR_CR_LPLVDS) -#define CR_LPLVDS_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CR_OFFSET_BB * 32) + (LPLVDS_BIT_NUMBER * 4)) - - /** - * @} - */ - -/** @defgroup PWREx_CSR_register_alias PWRx CSR Register alias address - * @{ - */ -/* --- CSR Register ---*/ -/* Alias word address of BRE bit */ -#define BRE_BIT_NUMBER POSITION_VAL(PWR_CSR_BRE) -#define CSR_BRE_BB (uint32_t)(PERIPH_BB_BASE + (PWR_CSR_OFFSET_BB * 32) + (BRE_BIT_NUMBER * 4)) -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup PWREx_Private_Macros PWREx Private Macros - * @{ - */ - -/** @defgroup PWREx_IS_PWR_Definitions PWREx Private macros to check input parameters - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) -#define IS_PWR_REGULATOR_UNDERDRIVE(REGULATOR) (((REGULATOR) == PWR_MAINREGULATOR_UNDERDRIVE_ON) || \ - ((REGULATOR) == PWR_LOWPOWERREGULATOR_UNDERDRIVE_ON)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */ - -#if defined(STM32F405xx) || defined(STM32F407xx) || defined(STM32F415xx) || defined(STM32F417xx) -#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ - ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2)) -#else -#define IS_PWR_VOLTAGE_SCALING_RANGE(VOLTAGE) (((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE1) || \ - ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE2) || \ - ((VOLTAGE) == PWR_REGULATOR_VOLTAGE_SCALE3)) -#endif /* STM32F405xx || STM32F407xx || STM32F415xx || STM32F417xx */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_HAL_PWR_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_qspi.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_qspi.h deleted file mode 100644 index b444a46..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_qspi.h +++ /dev/null @@ -1,788 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_qspi.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of QSPI HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_QSPI_H -#define __STM32F4xx_HAL_QSPI_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F446xx) -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup QSPI - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup QSPI_Exported_Types QSPI Exported Types - * @{ - */ - -/** - * @brief QSPI Init structure definition - */ - -typedef struct -{ - uint32_t ClockPrescaler; /* Specifies the prescaler factor for generating clock based on the AHB clock. - This parameter can be a number between 0 and 255 */ - - uint32_t FifoThreshold; /* Specifies the threshold number of bytes in the FIFO (used only in indirect mode) - This parameter can be a value between 1 and 32 */ - - uint32_t SampleShifting; /* Specifies the Sample Shift. The data is sampled 1/2 clock cycle delay later to - take in account external signal delays. (It should be QSPI_SAMPLE_SHIFTING_NONE in DDR mode) - This parameter can be a value of @ref QSPI_SampleShifting */ - - uint32_t FlashSize; /* Specifies the Flash Size. FlashSize+1 is effectively the number of address bits - required to address the flash memory. The flash capacity can be up to 4GB - (addressed using 32 bits) in indirect mode, but the addressable space in - memory-mapped mode is limited to 256MB - This parameter can be a number between 0 and 31 */ - - uint32_t ChipSelectHighTime; /* Specifies the Chip Select High Time. ChipSelectHighTime+1 defines the minimum number - of clock cycles which the chip select must remain high between commands. - This parameter can be a value of @ref QSPI_ChipSelectHighTime */ - - uint32_t ClockMode; /* Specifies the Clock Mode. It indicates the level that clock takes between commands. - This parameter can be a value of @ref QSPI_ClockMode */ - - uint32_t FlashID; /* Specifies the Flash which will be used, - This parameter can be a value of @ref QSPI_Flash_Select */ - - uint32_t DualFlash; /* Specifies the Dual Flash Mode State - This parameter can be a value of @ref QSPI_DualFlash_Mode */ -}QSPI_InitTypeDef; - -/** - * @brief HAL QSPI State structures definition - */ -typedef enum -{ - HAL_QSPI_STATE_RESET = 0x00, /*!< Peripheral not initialized */ - HAL_QSPI_STATE_READY = 0x01, /*!< Peripheral initialized and ready for use */ - HAL_QSPI_STATE_BUSY = 0x02, /*!< Peripheral in indirect mode and busy */ - HAL_QSPI_STATE_BUSY_INDIRECT_TX = 0x12, /*!< Peripheral in indirect mode with transmission ongoing */ - HAL_QSPI_STATE_BUSY_INDIRECT_RX = 0x22, /*!< Peripheral in indirect mode with reception ongoing */ - HAL_QSPI_STATE_BUSY_AUTO_POLLING = 0x42, /*!< Peripheral in auto polling mode ongoing */ - HAL_QSPI_STATE_BUSY_MEM_MAPPED = 0x82, /*!< Peripheral in memory mapped mode ongoing */ - HAL_QSPI_STATE_ERROR = 0x04 /*!< Peripheral in error */ -}HAL_QSPI_StateTypeDef; - -/** - * @brief QSPI Handle Structure definition - */ -typedef struct -{ - QUADSPI_TypeDef *Instance; /* QSPI registers base address */ - QSPI_InitTypeDef Init; /* QSPI communication parameters */ - uint8_t *pTxBuffPtr; /* Pointer to QSPI Tx transfer Buffer */ - __IO uint16_t TxXferSize; /* QSPI Tx Transfer size */ - __IO uint16_t TxXferCount; /* QSPI Tx Transfer Counter */ - uint8_t *pRxBuffPtr; /* Pointer to QSPI Rx transfer Buffer */ - __IO uint16_t RxXferSize; /* QSPI Rx Transfer size */ - __IO uint16_t RxXferCount; /* QSPI Rx Transfer Counter */ - DMA_HandleTypeDef *hdma; /* QSPI Rx/Tx DMA Handle parameters */ - __IO HAL_LockTypeDef Lock; /* Locking object */ - __IO HAL_QSPI_StateTypeDef State; /* QSPI communication state */ - __IO uint32_t ErrorCode; /* QSPI Error code */ - uint32_t Timeout; /* Timeout for the QSPI memory access */ -}QSPI_HandleTypeDef; - -/** - * @brief QSPI Command structure definition - */ -typedef struct -{ - uint32_t Instruction; /* Specifies the Instruction to be sent - This parameter can be a value (8-bit) between 0x00 and 0xFF */ - uint32_t Address; /* Specifies the Address to be sent (Size from 1 to 4 bytes according AddressSize) - This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFF */ - uint32_t AlternateBytes; /* Specifies the Alternate Bytes to be sent (Size from 1 to 4 bytes according AlternateBytesSize) - This parameter can be a value (32-bits) between 0x0 and 0xFFFFFFFF */ - uint32_t AddressSize; /* Specifies the Address Size - This parameter can be a value of @ref QSPI_AddressSize */ - uint32_t AlternateBytesSize; /* Specifies the Alternate Bytes Size - This parameter can be a value of @ref QSPI_AlternateBytesSize */ - uint32_t DummyCycles; /* Specifies the Number of Dummy Cycles. - This parameter can be a number between 0 and 31 */ - uint32_t InstructionMode; /* Specifies the Instruction Mode - This parameter can be a value of @ref QSPI_InstructionMode */ - uint32_t AddressMode; /* Specifies the Address Mode - This parameter can be a value of @ref QSPI_AddressMode */ - uint32_t AlternateByteMode; /* Specifies the Alternate Bytes Mode - This parameter can be a value of @ref QSPI_AlternateBytesMode */ - uint32_t DataMode; /* Specifies the Data Mode (used for dummy cycles and data phases) - This parameter can be a value of @ref QSPI_DataMode */ - uint32_t NbData; /* Specifies the number of data to transfer. - This parameter can be any value between 0 and 0xFFFFFFFF (0 means undefined length - until end of memory)*/ - uint32_t DdrMode; /* Specifies the double data rate mode for address, alternate byte and data phase - This parameter can be a value of @ref QSPI_DdrMode */ - uint32_t DdrHoldHalfCycle; /* Specifies the DDR hold half cycle. It delays the data output by one half of - system clock in DDR mode. - This parameter can be a value of @ref QSPI_DdrHoldHalfCycle */ - uint32_t SIOOMode; /* Specifies the send instruction only once mode - This parameter can be a value of @ref QSPI_SIOOMode */ -}QSPI_CommandTypeDef; - -/** - * @brief QSPI Auto Polling mode configuration structure definition - */ -typedef struct -{ - uint32_t Match; /* Specifies the value to be compared with the masked status register to get a match. - This parameter can be any value between 0 and 0xFFFFFFFF */ - uint32_t Mask; /* Specifies the mask to be applied to the status bytes received. - This parameter can be any value between 0 and 0xFFFFFFFF */ - uint32_t Interval; /* Specifies the number of clock cycles between two read during automatic polling phases. - This parameter can be any value between 0 and 0xFFFF */ - uint32_t StatusBytesSize; /* Specifies the size of the status bytes received. - This parameter can be any value between 1 and 4 */ - uint32_t MatchMode; /* Specifies the method used for determining a match. - This parameter can be a value of @ref QSPI_MatchMode */ - uint32_t AutomaticStop; /* Specifies if automatic polling is stopped after a match. - This parameter can be a value of @ref QSPI_AutomaticStop */ -}QSPI_AutoPollingTypeDef; - -/** - * @brief QSPI Memory Mapped mode configuration structure definition - */ -typedef struct -{ - uint32_t TimeOutPeriod; /* Specifies the number of clock to wait when the FIFO is full before to release the chip select. - This parameter can be any value between 0 and 0xFFFF */ - uint32_t TimeOutActivation; /* Specifies if the time out counter is enabled to release the chip select. - This parameter can be a value of @ref QSPI_TimeOutActivation */ -}QSPI_MemoryMappedTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup QSPI_Exported_Constants QSPI Exported Constants - * @{ - */ -/** @defgroup QSPI_ErrorCode QSPI Error Code - * @{ - */ -#define HAL_QSPI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ -#define HAL_QSPI_ERROR_TIMEOUT ((uint32_t)0x00000001) /*!< Timeout error */ -#define HAL_QSPI_ERROR_TRANSFER ((uint32_t)0x00000002) /*!< Transfer error */ -#define HAL_QSPI_ERROR_DMA ((uint32_t)0x00000004) /*!< DMA transfer error */ -/** - * @} - */ - -/** @defgroup QSPI_SampleShifting QSPI Sample Shifting - * @{ - */ -#define QSPI_SAMPLE_SHIFTING_NONE ((uint32_t)0x00000000) /*!<No clock cycle shift to sample data*/ -#define QSPI_SAMPLE_SHIFTING_HALFCYCLE ((uint32_t)QUADSPI_CR_SSHIFT) /*!<1/2 clock cycle shift to sample data*/ -/** - * @} - */ - -/** @defgroup QSPI_ChipSelectHighTime QSPI Chip Select High Time - * @{ - */ -#define QSPI_CS_HIGH_TIME_1_CYCLE ((uint32_t)0x00000000) /*!<nCS stay high for at least 1 clock cycle between commands*/ -#define QSPI_CS_HIGH_TIME_2_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_0) /*!<nCS stay high for at least 2 clock cycles between commands*/ -#define QSPI_CS_HIGH_TIME_3_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 3 clock cycles between commands*/ -#define QSPI_CS_HIGH_TIME_4_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_0 | QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 4 clock cycles between commands*/ -#define QSPI_CS_HIGH_TIME_5_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_2) /*!<nCS stay high for at least 5 clock cycles between commands*/ -#define QSPI_CS_HIGH_TIME_6_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_0) /*!<nCS stay high for at least 6 clock cycles between commands*/ -#define QSPI_CS_HIGH_TIME_7_CYCLE ((uint32_t)QUADSPI_DCR_CSHT_2 | QUADSPI_DCR_CSHT_1) /*!<nCS stay high for at least 7 clock cycles between commands*/ -#define QSPI_CS_HIGH_TIME_8_CYCLE ((uint32_t)QUADSPI_DCR_CSHT) /*!<nCS stay high for at least 8 clock cycles between commands*/ -/** - * @} - */ - -/** @defgroup QSPI_ClockMode QSPI Clock Mode - * @{ - */ -#define QSPI_CLOCK_MODE_0 ((uint32_t)0x00000000) /*!<Clk stays low while nCS is released*/ -#define QSPI_CLOCK_MODE_3 ((uint32_t)QUADSPI_DCR_CKMODE) /*!<Clk goes high while nCS is released*/ -/** - * @} - */ - -/** @defgroup QSPI_Flash_Select QSPI Flash Select - * @{ - */ -#define QSPI_FLASH_ID_1 ((uint32_t)0x00000000) -#define QSPI_FLASH_ID_2 ((uint32_t)QUADSPI_CR_FSEL) -/** - * @} - */ - - /** @defgroup QSPI_DualFlash_Mode QSPI Dual Flash Mode - * @{ - */ -#define QSPI_DUALFLASH_ENABLE ((uint32_t)QUADSPI_CR_DFM) -#define QSPI_DUALFLASH_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup QSPI_AddressSize QSPI Address Size - * @{ - */ -#define QSPI_ADDRESS_8_BITS ((uint32_t)0x00000000) /*!<8-bit address*/ -#define QSPI_ADDRESS_16_BITS ((uint32_t)QUADSPI_CCR_ADSIZE_0) /*!<16-bit address*/ -#define QSPI_ADDRESS_24_BITS ((uint32_t)QUADSPI_CCR_ADSIZE_1) /*!<24-bit address*/ -#define QSPI_ADDRESS_32_BITS ((uint32_t)QUADSPI_CCR_ADSIZE) /*!<32-bit address*/ -/** - * @} - */ - -/** @defgroup QSPI_AlternateBytesSize QSPI Alternate Bytes Size - * @{ - */ -#define QSPI_ALTERNATE_BYTES_8_BITS ((uint32_t)0x00000000) /*!<8-bit alternate bytes*/ -#define QSPI_ALTERNATE_BYTES_16_BITS ((uint32_t)QUADSPI_CCR_ABSIZE_0) /*!<16-bit alternate bytes*/ -#define QSPI_ALTERNATE_BYTES_24_BITS ((uint32_t)QUADSPI_CCR_ABSIZE_1) /*!<24-bit alternate bytes*/ -#define QSPI_ALTERNATE_BYTES_32_BITS ((uint32_t)QUADSPI_CCR_ABSIZE) /*!<32-bit alternate bytes*/ -/** - * @} - */ - -/** @defgroup QSPI_InstructionMode QSPI Instruction Mode -* @{ -*/ -#define QSPI_INSTRUCTION_NONE ((uint32_t)0x00000000) /*!<No instruction*/ -#define QSPI_INSTRUCTION_1_LINE ((uint32_t)QUADSPI_CCR_IMODE_0) /*!<Instruction on a single line*/ -#define QSPI_INSTRUCTION_2_LINES ((uint32_t)QUADSPI_CCR_IMODE_1) /*!<Instruction on two lines*/ -#define QSPI_INSTRUCTION_4_LINES ((uint32_t)QUADSPI_CCR_IMODE) /*!<Instruction on four lines*/ -/** - * @} - */ - -/** @defgroup QSPI_AddressMode QSPI Address Mode -* @{ -*/ -#define QSPI_ADDRESS_NONE ((uint32_t)0x00000000) /*!<No address*/ -#define QSPI_ADDRESS_1_LINE ((uint32_t)QUADSPI_CCR_ADMODE_0) /*!<Address on a single line*/ -#define QSPI_ADDRESS_2_LINES ((uint32_t)QUADSPI_CCR_ADMODE_1) /*!<Address on two lines*/ -#define QSPI_ADDRESS_4_LINES ((uint32_t)QUADSPI_CCR_ADMODE) /*!<Address on four lines*/ -/** - * @} - */ - -/** @defgroup QSPI_AlternateBytesMode QSPI Alternate Bytes Mode -* @{ -*/ -#define QSPI_ALTERNATE_BYTES_NONE ((uint32_t)0x00000000) /*!<No alternate bytes*/ -#define QSPI_ALTERNATE_BYTES_1_LINE ((uint32_t)QUADSPI_CCR_ABMODE_0) /*!<Alternate bytes on a single line*/ -#define QSPI_ALTERNATE_BYTES_2_LINES ((uint32_t)QUADSPI_CCR_ABMODE_1) /*!<Alternate bytes on two lines*/ -#define QSPI_ALTERNATE_BYTES_4_LINES ((uint32_t)QUADSPI_CCR_ABMODE) /*!<Alternate bytes on four lines*/ -/** - * @} - */ - -/** @defgroup QSPI_DataMode QSPI Data Mode - * @{ - */ -#define QSPI_DATA_NONE ((uint32_t)0X00000000) /*!<No data*/ -#define QSPI_DATA_1_LINE ((uint32_t)QUADSPI_CCR_DMODE_0) /*!<Data on a single line*/ -#define QSPI_DATA_2_LINES ((uint32_t)QUADSPI_CCR_DMODE_1) /*!<Data on two lines*/ -#define QSPI_DATA_4_LINES ((uint32_t)QUADSPI_CCR_DMODE) /*!<Data on four lines*/ -/** - * @} - */ - -/** @defgroup QSPI_DdrMode QSPI Ddr Mode - * @{ - */ -#define QSPI_DDR_MODE_DISABLE ((uint32_t)0x00000000) /*!<Double data rate mode disabled*/ -#define QSPI_DDR_MODE_ENABLE ((uint32_t)QUADSPI_CCR_DDRM) /*!<Double data rate mode enabled*/ -/** - * @} - */ - -/** @defgroup QSPI_DdrHoldHalfCycle QSPI Ddr HoldHalfCycle - * @{ - */ -#define QSPI_DDR_HHC_ANALOG_DELAY ((uint32_t)0x00000000) /*!<Delay the data output using analog delay in DDR mode*/ -#define QSPI_DDR_HHC_HALF_CLK_DELAY ((uint32_t)QUADSPI_CCR_DHHC) /*!<Delay the data output by 1/2 clock cycle in DDR mode*/ -/** - * @} - */ - -/** @defgroup QSPI_SIOOMode QSPI SIOO Mode - * @{ - */ -#define QSPI_SIOO_INST_EVERY_CMD ((uint32_t)0x00000000) /*!<Send instruction on every transaction*/ -#define QSPI_SIOO_INST_ONLY_FIRST_CMD ((uint32_t)QUADSPI_CCR_SIOO) /*!<Send instruction only for the first command*/ -/** - * @} - */ - -/** @defgroup QSPI_MatchMode QSPI Match Mode - * @{ - */ -#define QSPI_MATCH_MODE_AND ((uint32_t)0x00000000) /*!<AND match mode between unmasked bits*/ -#define QSPI_MATCH_MODE_OR ((uint32_t)QUADSPI_CR_PMM) /*!<OR match mode between unmasked bits*/ -/** - * @} - */ - -/** @defgroup QSPI_AutomaticStop QSPI Automatic Stop - * @{ - */ -#define QSPI_AUTOMATIC_STOP_DISABLE ((uint32_t)0x00000000) /*!<AutoPolling stops only with abort or QSPI disabling*/ -#define QSPI_AUTOMATIC_STOP_ENABLE ((uint32_t)QUADSPI_CR_APMS) /*!<AutoPolling stops as soon as there is a match*/ -/** - * @} - */ - -/** @defgroup QSPI_TimeOutActivation QSPI TimeOut Activation - * @{ - */ -#define QSPI_TIMEOUT_COUNTER_DISABLE ((uint32_t)0x00000000) /*!<Timeout counter disabled, nCS remains active*/ -#define QSPI_TIMEOUT_COUNTER_ENABLE ((uint32_t)QUADSPI_CR_TCEN) /*!<Timeout counter enabled, nCS released when timeout expires*/ -/** - * @} - */ - -/** @defgroup QSPI_Flags QSPI Flags - * @{ - */ -#define QSPI_FLAG_BUSY QUADSPI_SR_BUSY /*!<Busy flag: operation is ongoing*/ -#define QSPI_FLAG_TO QUADSPI_SR_TOF /*!<Timeout flag: timeout occurs in memory-mapped mode*/ -#define QSPI_FLAG_SM QUADSPI_SR_SMF /*!<Status match flag: received data matches in autopolling mode*/ -#define QSPI_FLAG_FT QUADSPI_SR_FTF /*!<Fifo threshold flag: Fifo threshold reached or data left after read from memory is complete*/ -#define QSPI_FLAG_TC QUADSPI_SR_TCF /*!<Transfer complete flag: programmed number of data have been transferred or the transfer has been aborted*/ -#define QSPI_FLAG_TE QUADSPI_SR_TEF /*!<Transfer error flag: invalid address is being accessed*/ -/** - * @} - */ - -/** @defgroup QSPI_Interrupts QSPI Interrupts - * @{ - */ -#define QSPI_IT_TO QUADSPI_CR_TOIE /*!<Interrupt on the timeout flag*/ -#define QSPI_IT_SM QUADSPI_CR_SMIE /*!<Interrupt on the status match flag*/ -#define QSPI_IT_FT QUADSPI_CR_FTIE /*!<Interrupt on the fifo threshold flag*/ -#define QSPI_IT_TC QUADSPI_CR_TCIE /*!<Interrupt on the transfer complete flag*/ -#define QSPI_IT_TE QUADSPI_CR_TEIE /*!<Interrupt on the transfer error flag*/ -/** - * @} - */ - -/** @defgroup QSPI_Timeout_definition QSPI Timeout definition - * @{ - */ -#define HAL_QPSI_TIMEOUT_DEFAULT_VALUE ((uint32_t)5000)/* 5 s */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup QSPI_Exported_Macros QSPI Exported Macros - * @{ - */ - -/** @brief Reset QSPI handle state - * @param __HANDLE__: QSPI handle. - * @retval None - */ -#define __HAL_QSPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_QSPI_STATE_RESET) - -/** @brief Enable QSPI - * @param __HANDLE__: specifies the QSPI Handle. - * @retval None - */ -#define __HAL_QSPI_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN) - -/** @brief Disable QSPI - * @param __HANDLE__: specifies the QSPI Handle. - * @retval None - */ -#define __HAL_QSPI_DISABLE(__HANDLE__) CLEAR_BIT((__HANDLE__)->Instance->CR, QUADSPI_CR_EN) - -/** @brief Enables the specified QSPI interrupt. - * @param __HANDLE__: specifies the QSPI Handle. - * @param __INTERRUPT__: specifies the QSPI interrupt source to enable. - * This parameter can be one of the following values: - * @arg QSPI_IT_TO: QSPI Time out interrupt - * @arg QSPI_IT_SM: QSPI Status match interrupt - * @arg QSPI_IT_FT: QSPI FIFO threshold interrupt - * @arg QSPI_IT_TC: QSPI Transfer complete interrupt - * @arg QSPI_IT_TE: QSPI Transfer error interrupt - * @retval None - */ -#define __HAL_QSPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) - - -/** @brief Disables the specified QSPI interrupt. - * @param __HANDLE__: specifies the QSPI Handle. - * @param __INTERRUPT__: specifies the QSPI interrupt source to disable. - * This parameter can be one of the following values: - * @arg QSPI_IT_TO: QSPI Timeout interrupt - * @arg QSPI_IT_SM: QSPI Status match interrupt - * @arg QSPI_IT_FT: QSPI FIFO threshold interrupt - * @arg QSPI_IT_TC: QSPI Transfer complete interrupt - * @arg QSPI_IT_TE: QSPI Transfer error interrupt - * @retval None - */ -#define __HAL_QSPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) CLEAR_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) - -/** @brief Checks whether the specified QSPI interrupt source is enabled. - * @param __HANDLE__: specifies the QSPI Handle. - * @param __INTERRUPT__: specifies the QSPI interrupt source to check. - * This parameter can be one of the following values: - * @arg QSPI_IT_TO: QSPI Time out interrupt - * @arg QSPI_IT_SM: QSPI Status match interrupt - * @arg QSPI_IT_FT: QSPI FIFO threshold interrupt - * @arg QSPI_IT_TC: QSPI Transfer complete interrupt - * @arg QSPI_IT_TE: QSPI Transfer error interrupt - * @retval The new state of __INTERRUPT__ (TRUE or FALSE). - */ -#define __HAL_QSPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (READ_BIT((__HANDLE__)->Instance->CR, (__INTERRUPT__)) == (__INTERRUPT__)) - -/** - * @brief Get the selected QSPI's flag status. - * @param __HANDLE__: specifies the QSPI Handle. - * @param __FLAG__: specifies the QSPI flag to check. - * This parameter can be one of the following values: - * @arg QSPI_FLAG_BUSY: QSPI Busy flag - * @arg QSPI_FLAG_TO: QSPI Time out flag - * @arg QSPI_FLAG_SM: QSPI Status match flag - * @arg QSPI_FLAG_FT: QSPI FIFO threshold flag - * @arg QSPI_FLAG_TC: QSPI Transfer complete flag - * @arg QSPI_FLAG_TE: QSPI Transfer error flag - * @retval None - */ -#define __HAL_QSPI_GET_FLAG(__HANDLE__, __FLAG__) (READ_BIT((__HANDLE__)->Instance->SR, (__FLAG__)) != 0) - -/** @brief Clears the specified QSPI's flag status. - * @param __HANDLE__: specifies the QSPI Handle. - * @param __FLAG__: specifies the QSPI clear register flag that needs to be set - * This parameter can be one of the following values: - * @arg QSPI_FLAG_TO: QSPI Time out flag - * @arg QSPI_FLAG_SM: QSPI Status match flag - * @arg QSPI_FLAG_TC: QSPI Transfer complete flag - * @arg QSPI_FLAG_TE: QSPI Transfer error flag - * @retval None - */ -#define __HAL_QSPI_CLEAR_FLAG(__HANDLE__, __FLAG__) WRITE_REG((__HANDLE__)->Instance->FCR, (__FLAG__)) -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup QSPI_Exported_Functions - * @{ - */ - -/** @addtogroup QSPI_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions ********************************/ -HAL_StatusTypeDef HAL_QSPI_Init (QSPI_HandleTypeDef *hqspi); -HAL_StatusTypeDef HAL_QSPI_DeInit (QSPI_HandleTypeDef *hqspi); -void HAL_QSPI_MspInit (QSPI_HandleTypeDef *hqspi); -void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef *hqspi); -/** - * @} - */ - -/** @addtogroup QSPI_Exported_Functions_Group2 - * @{ - */ -/* IO operation functions *****************************************************/ -/* QSPI IRQ handler method */ -void HAL_QSPI_IRQHandler(QSPI_HandleTypeDef *hqspi); - -/* QSPI indirect mode */ -HAL_StatusTypeDef HAL_QSPI_Command (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, uint32_t Timeout); -HAL_StatusTypeDef HAL_QSPI_Transmit (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout); -HAL_StatusTypeDef HAL_QSPI_Receive (QSPI_HandleTypeDef *hqspi, uint8_t *pData, uint32_t Timeout); -HAL_StatusTypeDef HAL_QSPI_Command_IT (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd); -HAL_StatusTypeDef HAL_QSPI_Transmit_IT (QSPI_HandleTypeDef *hqspi, uint8_t *pData); -HAL_StatusTypeDef HAL_QSPI_Receive_IT (QSPI_HandleTypeDef *hqspi, uint8_t *pData); -HAL_StatusTypeDef HAL_QSPI_Transmit_DMA (QSPI_HandleTypeDef *hqspi, uint8_t *pData); -HAL_StatusTypeDef HAL_QSPI_Receive_DMA (QSPI_HandleTypeDef *hqspi, uint8_t *pData); - -/* QSPI status flag polling mode */ -HAL_StatusTypeDef HAL_QSPI_AutoPolling (QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg, uint32_t Timeout); -HAL_StatusTypeDef HAL_QSPI_AutoPolling_IT(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_AutoPollingTypeDef *cfg); - -/* QSPI memory-mapped mode */ -HAL_StatusTypeDef HAL_QSPI_MemoryMapped(QSPI_HandleTypeDef *hqspi, QSPI_CommandTypeDef *cmd, QSPI_MemoryMappedTypeDef *cfg); -/** - * @} - */ - -/** @addtogroup QSPI_Exported_Functions_Group3 - * @{ - */ -/* Callback functions in non-blocking modes ***********************************/ -void HAL_QSPI_ErrorCallback (QSPI_HandleTypeDef *hqspi); -void HAL_QSPI_FifoThresholdCallback(QSPI_HandleTypeDef *hqspi); - -/* QSPI indirect mode */ -void HAL_QSPI_CmdCpltCallback (QSPI_HandleTypeDef *hqspi); -void HAL_QSPI_RxCpltCallback (QSPI_HandleTypeDef *hqspi); -void HAL_QSPI_TxCpltCallback (QSPI_HandleTypeDef *hqspi); -void HAL_QSPI_RxHalfCpltCallback (QSPI_HandleTypeDef *hqspi); -void HAL_QSPI_TxHalfCpltCallback (QSPI_HandleTypeDef *hqspi); - -/* QSPI status flag polling mode */ -void HAL_QSPI_StatusMatchCallback (QSPI_HandleTypeDef *hqspi); - -/* QSPI memory-mapped mode */ -void HAL_QSPI_TimeOutCallback (QSPI_HandleTypeDef *hqspi); -/** - * @} - */ - -/** @addtogroup QSPI_Exported_Functions_Group4 - * @{ - */ -/* Peripheral Control and State functions ************************************/ -HAL_QSPI_StateTypeDef HAL_QSPI_GetState(QSPI_HandleTypeDef *hqspi); -uint32_t HAL_QSPI_GetError(QSPI_HandleTypeDef *hqspi); -HAL_StatusTypeDef HAL_QSPI_Abort (QSPI_HandleTypeDef *hqspi); -void HAL_QSPI_SetTimeout(QSPI_HandleTypeDef *hqspi, uint32_t Timeout); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup QSPI_Private_Constants QSPI Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup QSPI_Private_Macros QSPI Private Macros - * @{ - */ -/** @defgroup QSPI_ClockPrescaler QSPI Clock Prescaler - * @{ - */ -#define IS_QSPI_CLOCK_PRESCALER(PRESCALER) ((PRESCALER) <= 0xFF) -/** - * @} - */ - -/** @defgroup QSPI_FifoThreshold QSPI Fifo Threshold - * @{ - */ -#define IS_QSPI_FIFO_THRESHOLD(THR) (((THR) > 0) && ((THR) <= 32)) -/** - * @} - */ - -#define IS_QSPI_SSHIFT(SSHIFT) (((SSHIFT) == QSPI_SAMPLE_SHIFTING_NONE) || \ - ((SSHIFT) == QSPI_SAMPLE_SHIFTING_HALFCYCLE)) - -/** @defgroup QSPI_FlashSize QSPI Flash Size - * @{ - */ -#define IS_QSPI_FLASH_SIZE(FSIZE) (((FSIZE) <= 31)) -/** - * @} - */ - -#define IS_QSPI_CS_HIGH_TIME(CSHTIME) (((CSHTIME) == QSPI_CS_HIGH_TIME_1_CYCLE) || \ - ((CSHTIME) == QSPI_CS_HIGH_TIME_2_CYCLE) || \ - ((CSHTIME) == QSPI_CS_HIGH_TIME_3_CYCLE) || \ - ((CSHTIME) == QSPI_CS_HIGH_TIME_4_CYCLE) || \ - ((CSHTIME) == QSPI_CS_HIGH_TIME_5_CYCLE) || \ - ((CSHTIME) == QSPI_CS_HIGH_TIME_6_CYCLE) || \ - ((CSHTIME) == QSPI_CS_HIGH_TIME_7_CYCLE) || \ - ((CSHTIME) == QSPI_CS_HIGH_TIME_8_CYCLE)) - -#define IS_QSPI_CLOCK_MODE(CLKMODE) (((CLKMODE) == QSPI_CLOCK_MODE_0) || \ - ((CLKMODE) == QSPI_CLOCK_MODE_3)) - -#define IS_QSPI_FLASH_ID(FLA) (((FLA) == QSPI_FLASH_ID_1) || \ - ((FLA) == QSPI_FLASH_ID_2)) - -#define IS_QSPI_DUAL_FLASH_MODE(MODE) (((MODE) == QSPI_DUALFLASH_ENABLE) || \ - ((MODE) == QSPI_DUALFLASH_DISABLE)) - - -/** @defgroup QSPI_Instruction QSPI Instruction - * @{ - */ -#define IS_QSPI_INSTRUCTION(INSTRUCTION) ((INSTRUCTION) <= 0xFF) -/** - * @} - */ - -#define IS_QSPI_ADDRESS_SIZE(ADDR_SIZE) (((ADDR_SIZE) == QSPI_ADDRESS_8_BITS) || \ - ((ADDR_SIZE) == QSPI_ADDRESS_16_BITS) || \ - ((ADDR_SIZE) == QSPI_ADDRESS_24_BITS) || \ - ((ADDR_SIZE) == QSPI_ADDRESS_32_BITS)) - -#define IS_QSPI_ALTERNATE_BYTES_SIZE(SIZE) (((SIZE) == QSPI_ALTERNATE_BYTES_8_BITS) || \ - ((SIZE) == QSPI_ALTERNATE_BYTES_16_BITS) || \ - ((SIZE) == QSPI_ALTERNATE_BYTES_24_BITS) || \ - ((SIZE) == QSPI_ALTERNATE_BYTES_32_BITS)) - - -/** @defgroup QSPI_DummyCycles QSPI Dummy Cycles - * @{ - */ -#define IS_QSPI_DUMMY_CYCLES(DCY) ((DCY) <= 31) -/** - * @} - */ - -#define IS_QSPI_INSTRUCTION_MODE(MODE) (((MODE) == QSPI_INSTRUCTION_NONE) || \ - ((MODE) == QSPI_INSTRUCTION_1_LINE) || \ - ((MODE) == QSPI_INSTRUCTION_2_LINES) || \ - ((MODE) == QSPI_INSTRUCTION_4_LINES)) - -#define IS_QSPI_ADDRESS_MODE(MODE) (((MODE) == QSPI_ADDRESS_NONE) || \ - ((MODE) == QSPI_ADDRESS_1_LINE) || \ - ((MODE) == QSPI_ADDRESS_2_LINES) || \ - ((MODE) == QSPI_ADDRESS_4_LINES)) - -#define IS_QSPI_ALTERNATE_BYTES_MODE(MODE) (((MODE) == QSPI_ALTERNATE_BYTES_NONE) || \ - ((MODE) == QSPI_ALTERNATE_BYTES_1_LINE) || \ - ((MODE) == QSPI_ALTERNATE_BYTES_2_LINES) || \ - ((MODE) == QSPI_ALTERNATE_BYTES_4_LINES)) - -#define IS_QSPI_DATA_MODE(MODE) (((MODE) == QSPI_DATA_NONE) || \ - ((MODE) == QSPI_DATA_1_LINE) || \ - ((MODE) == QSPI_DATA_2_LINES) || \ - ((MODE) == QSPI_DATA_4_LINES)) - -#define IS_QSPI_DDR_MODE(DDR_MODE) (((DDR_MODE) == QSPI_DDR_MODE_DISABLE) || \ - ((DDR_MODE) == QSPI_DDR_MODE_ENABLE)) - -#define IS_QSPI_DDR_HHC(DDR_HHC) (((DDR_HHC) == QSPI_DDR_HHC_ANALOG_DELAY) || \ - ((DDR_HHC) == QSPI_DDR_HHC_HALF_CLK_DELAY)) - -#define IS_QSPI_SIOO_MODE(SIOO_MODE) (((SIOO_MODE) == QSPI_SIOO_INST_EVERY_CMD) || \ - ((SIOO_MODE) == QSPI_SIOO_INST_ONLY_FIRST_CMD)) - -/** @defgroup QSPI_Interval QSPI Interval - * @{ - */ -#define IS_QSPI_INTERVAL(INTERVAL) ((INTERVAL) <= QUADSPI_PIR_INTERVAL) -/** - * @} - */ - -/** @defgroup QSPI_StatusBytesSize QSPI Status Bytes Size - * @{ - */ -#define IS_QSPI_STATUS_BYTES_SIZE(SIZE) (((SIZE) >= 1) && ((SIZE) <= 4)) -/** - * @} - */ -#define IS_QSPI_MATCH_MODE(MODE) (((MODE) == QSPI_MATCH_MODE_AND) || \ - ((MODE) == QSPI_MATCH_MODE_OR)) - -#define IS_QSPI_AUTOMATIC_STOP(APMS) (((APMS) == QSPI_AUTOMATIC_STOP_DISABLE) || \ - ((APMS) == QSPI_AUTOMATIC_STOP_ENABLE)) - -#define IS_QSPI_TIMEOUT_ACTIVATION(TCEN) (((TCEN) == QSPI_TIMEOUT_COUNTER_DISABLE) || \ - ((TCEN) == QSPI_TIMEOUT_COUNTER_ENABLE)) - -/** @defgroup QSPI_TimeOutPeriod QSPI TimeOut Period - * @{ - */ -#define IS_QSPI_TIMEOUT_PERIOD(PERIOD) ((PERIOD) <= 0xFFFF) -/** - * @} - */ - -#define IS_QSPI_GET_FLAG(FLAG) (((FLAG) == QSPI_FLAG_BUSY) || \ - ((FLAG) == QSPI_FLAG_TO) || \ - ((FLAG) == QSPI_FLAG_SM) || \ - ((FLAG) == QSPI_FLAG_FT) || \ - ((FLAG) == QSPI_FLAG_TC) || \ - ((FLAG) == QSPI_FLAG_TE)) - -#define IS_QSPI_IT(IT) ((((IT) & (uint32_t)0xFFE0FFFF) == 0x00000000) && ((IT) != 0x00000000)) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup QSPI_Private_Functions QSPI Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* STM32F446xx */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_QSPI_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h deleted file mode 100644 index 1b470c7..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc.h +++ /dev/null @@ -1,1537 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rcc.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of RCC HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_RCC_H -#define __STM32F4xx_HAL_RCC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/* Include RCC HAL Extended module */ -/* (include on top of file since RCC structures are defined in extended file) */ -#include "stm32f4xx_hal_rcc_ex.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup RCC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup RCC_Exported_Types RCC Exported Types - * @{ - */ - -/** - * @brief RCC Internal/External Oscillator (HSE, HSI, LSE and LSI) configuration structure definition - */ -typedef struct -{ - uint32_t OscillatorType; /*!< The oscillators to be configured. - This parameter can be a value of @ref RCC_Oscillator_Type */ - - uint32_t HSEState; /*!< The new state of the HSE. - This parameter can be a value of @ref RCC_HSE_Config */ - - uint32_t LSEState; /*!< The new state of the LSE. - This parameter can be a value of @ref RCC_LSE_Config */ - - uint32_t HSIState; /*!< The new state of the HSI. - This parameter can be a value of @ref RCC_HSI_Config */ - - uint32_t HSICalibrationValue; /*!< The calibration trimming value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x1F */ - - uint32_t LSIState; /*!< The new state of the LSI. - This parameter can be a value of @ref RCC_LSI_Config */ - - RCC_PLLInitTypeDef PLL; /*!< PLL structure parameters */ - -}RCC_OscInitTypeDef; - -/** - * @brief RCC System, AHB and APB busses clock configuration structure definition - */ -typedef struct -{ - uint32_t ClockType; /*!< The clock to be configured. - This parameter can be a value of @ref RCC_System_Clock_Type */ - - uint32_t SYSCLKSource; /*!< The clock source (SYSCLKS) used as system clock. - This parameter can be a value of @ref RCC_System_Clock_Source */ - - uint32_t AHBCLKDivider; /*!< The AHB clock (HCLK) divider. This clock is derived from the system clock (SYSCLK). - This parameter can be a value of @ref RCC_AHB_Clock_Source */ - - uint32_t APB1CLKDivider; /*!< The APB1 clock (PCLK1) divider. This clock is derived from the AHB clock (HCLK). - This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ - - uint32_t APB2CLKDivider; /*!< The APB2 clock (PCLK2) divider. This clock is derived from the AHB clock (HCLK). - This parameter can be a value of @ref RCC_APB1_APB2_Clock_Source */ - -}RCC_ClkInitTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RCC_Exported_Constants RCC Exported Constants - * @{ - */ - -/** @defgroup RCC_Oscillator_Type Oscillator Type - * @{ - */ -#define RCC_OSCILLATORTYPE_NONE ((uint32_t)0x00000000) -#define RCC_OSCILLATORTYPE_HSE ((uint32_t)0x00000001) -#define RCC_OSCILLATORTYPE_HSI ((uint32_t)0x00000002) -#define RCC_OSCILLATORTYPE_LSE ((uint32_t)0x00000004) -#define RCC_OSCILLATORTYPE_LSI ((uint32_t)0x00000008) -/** - * @} - */ - -/** @defgroup RCC_HSE_Config HSE Config - * @{ - */ -#define RCC_HSE_OFF ((uint8_t)0x00) -#define RCC_HSE_ON ((uint8_t)0x01) -#define RCC_HSE_BYPASS ((uint8_t)0x05) -/** - * @} - */ - -/** @defgroup RCC_LSE_Config LSE Config - * @{ - */ -#define RCC_LSE_OFF ((uint8_t)0x00) -#define RCC_LSE_ON ((uint8_t)0x01) -#define RCC_LSE_BYPASS ((uint8_t)0x05) -/** - * @} - */ - -/** @defgroup RCC_HSI_Config HSI Config - * @{ - */ -#define RCC_HSI_OFF ((uint8_t)0x00) -#define RCC_HSI_ON ((uint8_t)0x01) -/** - * @} - */ - -/** @defgroup RCC_LSI_Config LSI Config - * @{ - */ -#define RCC_LSI_OFF ((uint8_t)0x00) -#define RCC_LSI_ON ((uint8_t)0x01) -/** - * @} - */ - -/** @defgroup RCC_PLL_Config PLL Config - * @{ - */ -#define RCC_PLL_NONE ((uint8_t)0x00) -#define RCC_PLL_OFF ((uint8_t)0x01) -#define RCC_PLL_ON ((uint8_t)0x02) -/** - * @} - */ - -/** @defgroup RCC_PLLP_Clock_Divider PLLP Clock Divider - * @{ - */ -#define RCC_PLLP_DIV2 ((uint32_t)0x00000002) -#define RCC_PLLP_DIV4 ((uint32_t)0x00000004) -#define RCC_PLLP_DIV6 ((uint32_t)0x00000006) -#define RCC_PLLP_DIV8 ((uint32_t)0x00000008) -/** - * @} - */ - -/** @defgroup RCC_PLL_Clock_Source PLL Clock Source - * @{ - */ -#define RCC_PLLSOURCE_HSI RCC_PLLCFGR_PLLSRC_HSI -#define RCC_PLLSOURCE_HSE RCC_PLLCFGR_PLLSRC_HSE -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Type System Clock Type - * @{ - */ -#define RCC_CLOCKTYPE_SYSCLK ((uint32_t)0x00000001) -#define RCC_CLOCKTYPE_HCLK ((uint32_t)0x00000002) -#define RCC_CLOCKTYPE_PCLK1 ((uint32_t)0x00000004) -#define RCC_CLOCKTYPE_PCLK2 ((uint32_t)0x00000008) -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Source System Clock Source - * @{ - */ -#define RCC_SYSCLKSOURCE_HSI RCC_CFGR_SW_HSI -#define RCC_SYSCLKSOURCE_HSE RCC_CFGR_SW_HSE -#define RCC_SYSCLKSOURCE_PLLCLK RCC_CFGR_SW_PLL -#define RCC_SYSCLKSOURCE_PLLRCLK ((uint32_t)(RCC_CFGR_SW_0 | RCC_CFGR_SW_1)) -/** - * @} - */ - -/** @defgroup RCC_System_Clock_Source_Status System Clock Source Status - * @{ - */ -#define RCC_SYSCLKSOURCE_STATUS_HSI RCC_CFGR_SWS_HSI /*!< HSI used as system clock */ -#define RCC_SYSCLKSOURCE_STATUS_HSE RCC_CFGR_SWS_HSE /*!< HSE used as system clock */ -#define RCC_SYSCLKSOURCE_STATUS_PLLCLK RCC_CFGR_SWS_PLL /*!< PLL used as system clock */ -#define RCC_SYSCLKSOURCE_STATUS_PLLRCLK ((uint32_t)(RCC_CFGR_SW_0 | RCC_CFGR_SW_1)) /*!< PLLR used as system clock */ -/** - * @} - */ - -/** @defgroup RCC_AHB_Clock_Source AHB Clock Source - * @{ - */ -#define RCC_SYSCLK_DIV1 RCC_CFGR_HPRE_DIV1 -#define RCC_SYSCLK_DIV2 RCC_CFGR_HPRE_DIV2 -#define RCC_SYSCLK_DIV4 RCC_CFGR_HPRE_DIV4 -#define RCC_SYSCLK_DIV8 RCC_CFGR_HPRE_DIV8 -#define RCC_SYSCLK_DIV16 RCC_CFGR_HPRE_DIV16 -#define RCC_SYSCLK_DIV64 RCC_CFGR_HPRE_DIV64 -#define RCC_SYSCLK_DIV128 RCC_CFGR_HPRE_DIV128 -#define RCC_SYSCLK_DIV256 RCC_CFGR_HPRE_DIV256 -#define RCC_SYSCLK_DIV512 RCC_CFGR_HPRE_DIV512 -/** - * @} - */ - -/** @defgroup RCC_APB1_APB2_Clock_Source APB1/APB2 Clock Source - * @{ - */ -#define RCC_HCLK_DIV1 RCC_CFGR_PPRE1_DIV1 -#define RCC_HCLK_DIV2 RCC_CFGR_PPRE1_DIV2 -#define RCC_HCLK_DIV4 RCC_CFGR_PPRE1_DIV4 -#define RCC_HCLK_DIV8 RCC_CFGR_PPRE1_DIV8 -#define RCC_HCLK_DIV16 RCC_CFGR_PPRE1_DIV16 -/** - * @} - */ - -/** @defgroup RCC_RTC_Clock_Source RTC Clock Source - * @{ - */ -#define RCC_RTCCLKSOURCE_LSE ((uint32_t)0x00000100) -#define RCC_RTCCLKSOURCE_LSI ((uint32_t)0x00000200) -#define RCC_RTCCLKSOURCE_HSE_DIV2 ((uint32_t)0x00020300) -#define RCC_RTCCLKSOURCE_HSE_DIV3 ((uint32_t)0x00030300) -#define RCC_RTCCLKSOURCE_HSE_DIV4 ((uint32_t)0x00040300) -#define RCC_RTCCLKSOURCE_HSE_DIV5 ((uint32_t)0x00050300) -#define RCC_RTCCLKSOURCE_HSE_DIV6 ((uint32_t)0x00060300) -#define RCC_RTCCLKSOURCE_HSE_DIV7 ((uint32_t)0x00070300) -#define RCC_RTCCLKSOURCE_HSE_DIV8 ((uint32_t)0x00080300) -#define RCC_RTCCLKSOURCE_HSE_DIV9 ((uint32_t)0x00090300) -#define RCC_RTCCLKSOURCE_HSE_DIV10 ((uint32_t)0x000A0300) -#define RCC_RTCCLKSOURCE_HSE_DIV11 ((uint32_t)0x000B0300) -#define RCC_RTCCLKSOURCE_HSE_DIV12 ((uint32_t)0x000C0300) -#define RCC_RTCCLKSOURCE_HSE_DIV13 ((uint32_t)0x000D0300) -#define RCC_RTCCLKSOURCE_HSE_DIV14 ((uint32_t)0x000E0300) -#define RCC_RTCCLKSOURCE_HSE_DIV15 ((uint32_t)0x000F0300) -#define RCC_RTCCLKSOURCE_HSE_DIV16 ((uint32_t)0x00100300) -#define RCC_RTCCLKSOURCE_HSE_DIV17 ((uint32_t)0x00110300) -#define RCC_RTCCLKSOURCE_HSE_DIV18 ((uint32_t)0x00120300) -#define RCC_RTCCLKSOURCE_HSE_DIV19 ((uint32_t)0x00130300) -#define RCC_RTCCLKSOURCE_HSE_DIV20 ((uint32_t)0x00140300) -#define RCC_RTCCLKSOURCE_HSE_DIV21 ((uint32_t)0x00150300) -#define RCC_RTCCLKSOURCE_HSE_DIV22 ((uint32_t)0x00160300) -#define RCC_RTCCLKSOURCE_HSE_DIV23 ((uint32_t)0x00170300) -#define RCC_RTCCLKSOURCE_HSE_DIV24 ((uint32_t)0x00180300) -#define RCC_RTCCLKSOURCE_HSE_DIV25 ((uint32_t)0x00190300) -#define RCC_RTCCLKSOURCE_HSE_DIV26 ((uint32_t)0x001A0300) -#define RCC_RTCCLKSOURCE_HSE_DIV27 ((uint32_t)0x001B0300) -#define RCC_RTCCLKSOURCE_HSE_DIV28 ((uint32_t)0x001C0300) -#define RCC_RTCCLKSOURCE_HSE_DIV29 ((uint32_t)0x001D0300) -#define RCC_RTCCLKSOURCE_HSE_DIV30 ((uint32_t)0x001E0300) -#define RCC_RTCCLKSOURCE_HSE_DIV31 ((uint32_t)0x001F0300) -/** - * @} - */ - -/** @defgroup RCC_I2S_Clock_Source I2S Clock Source - * @{ - */ -#define RCC_I2SCLKSOURCE_PLLI2S ((uint32_t)0x00000000) -#define RCC_I2SCLKSOURCE_EXT ((uint32_t)0x00000001) -/** - * @} - */ - -/** @defgroup RCC_MCO_Index MCO Index - * @{ - */ -#define RCC_MCO1 ((uint32_t)0x00000000) -#define RCC_MCO2 ((uint32_t)0x00000001) -/** - * @} - */ - -/** @defgroup RCC_MCO1_Clock_Source MCO1 Clock Source - * @{ - */ -#define RCC_MCO1SOURCE_HSI ((uint32_t)0x00000000) -#define RCC_MCO1SOURCE_LSE RCC_CFGR_MCO1_0 -#define RCC_MCO1SOURCE_HSE RCC_CFGR_MCO1_1 -#define RCC_MCO1SOURCE_PLLCLK RCC_CFGR_MCO1 -/** - * @} - */ - -/** @defgroup RCC_MCO2_Clock_Source MCO2 Clock Source - * @{ - */ -#define RCC_MCO2SOURCE_SYSCLK ((uint32_t)0x00000000) -#define RCC_MCO2SOURCE_PLLI2SCLK RCC_CFGR_MCO2_0 -#define RCC_MCO2SOURCE_HSE RCC_CFGR_MCO2_1 -#define RCC_MCO2SOURCE_PLLCLK RCC_CFGR_MCO2 -/** - * @} - */ - -/** @defgroup RCC_MCOx_Clock_Prescaler MCOx Clock Prescaler - * @{ - */ -#define RCC_MCODIV_1 ((uint32_t)0x00000000) -#define RCC_MCODIV_2 RCC_CFGR_MCO1PRE_2 -#define RCC_MCODIV_3 ((uint32_t)RCC_CFGR_MCO1PRE_0 | RCC_CFGR_MCO1PRE_2) -#define RCC_MCODIV_4 ((uint32_t)RCC_CFGR_MCO1PRE_1 | RCC_CFGR_MCO1PRE_2) -#define RCC_MCODIV_5 RCC_CFGR_MCO1PRE -/** - * @} - */ - -/** @defgroup RCC_Interrupt Interrupts - * @{ - */ -#define RCC_IT_LSIRDY ((uint8_t)0x01) -#define RCC_IT_LSERDY ((uint8_t)0x02) -#define RCC_IT_HSIRDY ((uint8_t)0x04) -#define RCC_IT_HSERDY ((uint8_t)0x08) -#define RCC_IT_PLLRDY ((uint8_t)0x10) -#define RCC_IT_PLLI2SRDY ((uint8_t)0x20) -#define RCC_IT_CSS ((uint8_t)0x80) -/** - * @} - */ - -/** @defgroup RCC_Flag Flags - * Elements values convention: 0XXYYYYYb - * - YYYYY : Flag position in the register - * - 0XX : Register index - * - 01: CR register - * - 10: BDCR register - * - 11: CSR register - * @{ - */ -/* Flags in the CR register */ -#define RCC_FLAG_HSIRDY ((uint8_t)0x21) -#define RCC_FLAG_HSERDY ((uint8_t)0x31) -#define RCC_FLAG_PLLRDY ((uint8_t)0x39) -#define RCC_FLAG_PLLI2SRDY ((uint8_t)0x3B) - -/* Flags in the BDCR register */ -#define RCC_FLAG_LSERDY ((uint8_t)0x41) - -/* Flags in the CSR register */ -#define RCC_FLAG_LSIRDY ((uint8_t)0x61) -#define RCC_FLAG_BORRST ((uint8_t)0x79) -#define RCC_FLAG_PINRST ((uint8_t)0x7A) -#define RCC_FLAG_PORRST ((uint8_t)0x7B) -#define RCC_FLAG_SFTRST ((uint8_t)0x7C) -#define RCC_FLAG_IWDGRST ((uint8_t)0x7D) -#define RCC_FLAG_WWDGRST ((uint8_t)0x7E) -#define RCC_FLAG_LPWRRST ((uint8_t)0x7F) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup RCC_Exported_Macros RCC Exported Macros - * @{ - */ - -/** @defgroup RCC_AHB1_Clock_Enable_Disable AHB1 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_GPIOA_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOAEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_GPIOB_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOBEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_GPIOC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_GPIOD_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_GPIOE_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOEEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_GPIOH_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOHEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_CRC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CRCEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_BKPSRAM_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_BKPSRAMEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_CCMDATARAMEN_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_CCMDATARAMEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_DMA1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA1EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_DMA2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOA_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOAEN)) -#define __HAL_RCC_GPIOB_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOBEN)) -#define __HAL_RCC_GPIOC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOCEN)) -#define __HAL_RCC_GPIOD_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIODEN)) -#define __HAL_RCC_GPIOE_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOEEN)) -#define __HAL_RCC_GPIOH_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOHEN)) -#define __HAL_RCC_CRC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CRCEN)) -#define __HAL_RCC_BKPSRAM_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_BKPSRAMEN)) -#define __HAL_RCC_CCMDATARAMEN_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_CCMDATARAMEN)) -#define __HAL_RCC_DMA1_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA1EN)) -#define __HAL_RCC_DMA2_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2EN)) - -/** - * @} - */ - -/** @defgroup RCC_AHB2_Clock_Enable_Disable AHB2 Peripheral Clock Enable Disable - * @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_ENABLE() do {(RCC->AHB2ENR |= (RCC_AHB2ENR_OTGFSEN));\ - __HAL_RCC_SYSCFG_CLK_ENABLE();\ - }while(0) - -#define __HAL_RCC_USB_OTG_FS_CLK_DISABLE() do { (RCC->AHB2ENR &= ~(RCC_AHB2ENR_OTGFSEN));\ - __HAL_RCC_SYSCFG_CLK_DISABLE();\ - }while(0) - -#define __HAL_RCC_RNG_CLK_ENABLE() (RCC->AHB2ENR |= (RCC_AHB2ENR_RNGEN)) -#define __HAL_RCC_RNG_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_RNGEN)) - -/** - * @} - */ - -/** @defgroup RCC_APB1_Clock_Enable_Disable APB1 Peripheral Clock Enable Disable - * @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM2EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_TIM3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM3EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_TIM4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM4EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_TIM5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM5EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_WWDG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_WWDGEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_SPI2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI2EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_SPI3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPI3EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_USART2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART2EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_I2C1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C1EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_I2C2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C2EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_I2C3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_I2C3EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_PWR_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_PWREN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_TIM2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM2EN)) -#define __HAL_RCC_TIM3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM3EN)) -#define __HAL_RCC_TIM4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM4EN)) -#define __HAL_RCC_TIM5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM5EN)) -#define __HAL_RCC_WWDG_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_WWDGEN)) -#define __HAL_RCC_SPI2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI2EN)) -#define __HAL_RCC_SPI3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPI3EN)) -#define __HAL_RCC_USART2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART2EN)) -#define __HAL_RCC_I2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C1EN)) -#define __HAL_RCC_I2C2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C2EN)) -#define __HAL_RCC_I2C3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_I2C3EN)) -#define __HAL_RCC_PWR_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_PWREN)) -/** - * @} - */ - -/** @defgroup RCC_APB2_Clock_Enable_Disable APB2 Peripheral Clock Enable Disable - * @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - * @{ - */ -#define __HAL_RCC_TIM1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM1EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_USART1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART1EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_USART6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_USART6EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_ADC1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC1EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_SDIO_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SDIOEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_SPI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI1EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_SPI4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI4EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_SYSCFG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SYSCFGEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_TIM9_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM9EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_TIM10_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM10EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_TIM11_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM11EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM1EN)) -#define __HAL_RCC_USART1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN)) -#define __HAL_RCC_USART6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_USART6EN)) -#define __HAL_RCC_ADC1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC1EN)) -#define __HAL_RCC_SDIO_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SDIOEN)) -#define __HAL_RCC_SPI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI1EN)) -#define __HAL_RCC_SPI4_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI4EN)) -#define __HAL_RCC_SYSCFG_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SYSCFGEN)) -#define __HAL_RCC_TIM9_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM9EN)) -#define __HAL_RCC_TIM10_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM10EN)) -#define __HAL_RCC_TIM11_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM11EN)) -/** - * @} - */ - -/** @defgroup RCC_AHB1_Force_Release_Reset AHB1 Force Release Reset - * @brief Force or release AHB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB1_FORCE_RESET() (RCC->AHB1RSTR = 0xFFFFFFFF) -#define __HAL_RCC_GPIOA_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOARST)) -#define __HAL_RCC_GPIOB_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOBRST)) -#define __HAL_RCC_GPIOC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOCRST)) -#define __HAL_RCC_GPIOD_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOH_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOHRST)) -#define __HAL_RCC_CRC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_CRCRST)) -#define __HAL_RCC_DMA1_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA1RST)) -#define __HAL_RCC_DMA2_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2RST)) - -#define __HAL_RCC_AHB1_RELEASE_RESET() (RCC->AHB1RSTR = 0x00) -#define __HAL_RCC_GPIOA_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOARST)) -#define __HAL_RCC_GPIOB_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOBRST)) -#define __HAL_RCC_GPIOC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOCRST)) -#define __HAL_RCC_GPIOD_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIODRST)) -#define __HAL_RCC_GPIOE_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOERST)) -#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_GPIOH_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOHRST)) -#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST)) -#define __HAL_RCC_CRC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_CRCRST)) -#define __HAL_RCC_DMA1_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA1RST)) -#define __HAL_RCC_DMA2_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2RST)) -/** - * @} - */ - -/** @defgroup RCC_AHB2_Force_Release_Reset AHB2 Force Release Reset - * @brief Force or release AHB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB2_FORCE_RESET() (RCC->AHB2RSTR = 0xFFFFFFFF) -#define __HAL_RCC_USB_OTG_FS_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_OTGFSRST)) - -#define __HAL_RCC_AHB2_RELEASE_RESET() (RCC->AHB2RSTR = 0x00) -#define __HAL_RCC_USB_OTG_FS_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_OTGFSRST)) - -#define __HAL_RCC_RNG_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_RNGRST)) -#define __HAL_RCC_RNG_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_RNGRST)) -/** - * @} - */ - -/** @defgroup RCC_APB1_Force_Release_Reset APB1 Force Release Reset - * @brief Force or release APB1 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB1_FORCE_RESET() (RCC->APB1RSTR = 0xFFFFFFFF) -#define __HAL_RCC_TIM2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_TIM5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM5RST)) -#define __HAL_RCC_WWDG_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_WWDGRST)) -#define __HAL_RCC_SPI2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI2RST)) -#define __HAL_RCC_SPI3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_USART2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART2RST)) -#define __HAL_RCC_I2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C1RST)) -#define __HAL_RCC_I2C2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C2RST)) -#define __HAL_RCC_I2C3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_I2C3RST)) -#define __HAL_RCC_PWR_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_PWRRST)) - -#define __HAL_RCC_APB1_RELEASE_RESET() (RCC->APB1RSTR = 0x00) -#define __HAL_RCC_TIM2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM2RST)) -#define __HAL_RCC_TIM3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM3RST)) -#define __HAL_RCC_TIM4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM4RST)) -#define __HAL_RCC_TIM5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM5RST)) -#define __HAL_RCC_WWDG_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_WWDGRST)) -#define __HAL_RCC_SPI2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI2RST)) -#define __HAL_RCC_SPI3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPI3RST)) -#define __HAL_RCC_USART2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART2RST)) -#define __HAL_RCC_I2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C1RST)) -#define __HAL_RCC_I2C2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C2RST)) -#define __HAL_RCC_I2C3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_I2C3RST)) -#define __HAL_RCC_PWR_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_PWRRST)) -/** - * @} - */ - -/** @defgroup RCC_APB2_Force_Release_Reset APB2 Force Release Reset - * @brief Force or release APB2 peripheral reset. - * @{ - */ -#define __HAL_RCC_APB2_FORCE_RESET() (RCC->APB2RSTR = 0xFFFFFFFF) -#define __HAL_RCC_TIM1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM1RST)) -#define __HAL_RCC_USART1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART1RST)) -#define __HAL_RCC_USART6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_USART6RST)) -#define __HAL_RCC_ADC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_ADCRST)) -#define __HAL_RCC_SDIO_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI1RST)) -#define __HAL_RCC_SPI4_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_SYSCFG_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SYSCFGRST)) -#define __HAL_RCC_TIM9_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM9RST)) -#define __HAL_RCC_TIM10_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_TIM11_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM11RST)) - -#define __HAL_RCC_APB2_RELEASE_RESET() (RCC->APB2RSTR = 0x00) -#define __HAL_RCC_TIM1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM1RST)) -#define __HAL_RCC_USART1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART1RST)) -#define __HAL_RCC_USART6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_USART6RST)) -#define __HAL_RCC_ADC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_ADCRST)) -#define __HAL_RCC_SDIO_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SDIORST)) -#define __HAL_RCC_SPI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI1RST)) -#define __HAL_RCC_SPI4_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI4RST)) -#define __HAL_RCC_SYSCFG_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SYSCFGRST)) -#define __HAL_RCC_TIM9_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM9RST)) -#define __HAL_RCC_TIM10_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM10RST)) -#define __HAL_RCC_TIM11_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM11RST)) -/** - * @} - */ - -/** @defgroup RCC_AHB3_Force_Release_Reset AHB3 Force Release Reset - * @brief Force or release AHB3 peripheral reset. - * @{ - */ -#define __HAL_RCC_AHB3_FORCE_RESET() (RCC->AHB3RSTR = 0xFFFFFFFF) -#define __HAL_RCC_AHB3_RELEASE_RESET() (RCC->AHB3RSTR = 0x00) -/** - * @} - */ - -/** @defgroup RCC_AHB1_LowPower_Enable_Disable AHB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_GPIOA_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOALPEN)) -#define __HAL_RCC_GPIOB_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOBLPEN)) -#define __HAL_RCC_GPIOC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOCLPEN)) -#define __HAL_RCC_GPIOD_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOH_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOHLPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_BKPSRAMLPEN)) -#define __HAL_RCC_DMA1_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA1LPEN)) -#define __HAL_RCC_DMA2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2LPEN)) - -#define __HAL_RCC_GPIOA_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOALPEN)) -#define __HAL_RCC_GPIOB_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOBLPEN)) -#define __HAL_RCC_GPIOC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOCLPEN)) -#define __HAL_RCC_GPIOD_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIODLPEN)) -#define __HAL_RCC_GPIOE_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOELPEN)) -#define __HAL_RCC_GPIOH_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOHLPEN)) -#define __HAL_RCC_CRC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_CRCLPEN)) -#define __HAL_RCC_FLITF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_FLITFLPEN)) -#define __HAL_RCC_SRAM1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM1LPEN)) -#define __HAL_RCC_BKPSRAM_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_BKPSRAMLPEN)) -#define __HAL_RCC_DMA1_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA1LPEN)) -#define __HAL_RCC_DMA2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2LPEN)) -/** - * @} - */ - -/** @defgroup RCC_AHB2_LowPower_Enable_Disable AHB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_OTGFSLPEN)) - -#define __HAL_RCC_USB_OTG_FS_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_OTGFSLPEN)) - -#define __HAL_RCC_RNG_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_RNGLPEN)) -#define __HAL_RCC_RNG_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_RNGLPEN)) -/** - * @} - */ - -/** @defgroup RCC_APB1_LowPower_Enable_Disable APB1 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_TIM5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM5LPEN)) -#define __HAL_RCC_WWDG_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_WWDGLPEN)) -#define __HAL_RCC_SPI2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI2LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_USART2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART2LPEN)) -#define __HAL_RCC_I2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C1LPEN)) -#define __HAL_RCC_I2C2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C2LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_I2C3LPEN)) -#define __HAL_RCC_PWR_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_PWRLPEN)) - -#define __HAL_RCC_TIM2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM2LPEN)) -#define __HAL_RCC_TIM3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM3LPEN)) -#define __HAL_RCC_TIM4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM4LPEN)) -#define __HAL_RCC_TIM5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM5LPEN)) -#define __HAL_RCC_WWDG_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_WWDGLPEN)) -#define __HAL_RCC_SPI2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI2LPEN)) -#define __HAL_RCC_SPI3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPI3LPEN)) -#define __HAL_RCC_USART2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART2LPEN)) -#define __HAL_RCC_I2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C1LPEN)) -#define __HAL_RCC_I2C2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C2LPEN)) -#define __HAL_RCC_I2C3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_I2C3LPEN)) -#define __HAL_RCC_PWR_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_PWRLPEN)) -/** - * @} - */ - -/** @defgroup RCC_APB2_LowPower_Enable_Disable APB2 Peripheral Low Power Enable Disable - * @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wake-up from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - * @{ - */ -#define __HAL_RCC_TIM1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM1LPEN)) -#define __HAL_RCC_USART1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART1LPEN)) -#define __HAL_RCC_USART6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_USART6LPEN)) -#define __HAL_RCC_ADC1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC1LPEN)) -#define __HAL_RCC_SDIO_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI1LPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_SYSCFG_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SYSCFGLPEN)) -#define __HAL_RCC_TIM9_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM9LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_TIM11_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM11LPEN)) - -#define __HAL_RCC_TIM1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM1LPEN)) -#define __HAL_RCC_USART1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART1LPEN)) -#define __HAL_RCC_USART6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_USART6LPEN)) -#define __HAL_RCC_ADC1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC1LPEN)) -#define __HAL_RCC_SDIO_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SDIOLPEN)) -#define __HAL_RCC_SPI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI1LPEN)) -#define __HAL_RCC_SPI4_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI4LPEN)) -#define __HAL_RCC_SYSCFG_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SYSCFGLPEN)) -#define __HAL_RCC_TIM9_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM9LPEN)) -#define __HAL_RCC_TIM10_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM10LPEN)) -#define __HAL_RCC_TIM11_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM11LPEN)) -/** - * @} - */ - -/** @defgroup RCC_HSI_Configuration HSI Configuration - * @{ - */ - -/** @brief Macros to enable or disable the Internal High Speed oscillator (HSI). - * @note The HSI is stopped by hardware when entering STOP and STANDBY modes. - * It is used (enabled by hardware) as system clock source after startup - * from Reset, wake-up from STOP and STANDBY mode, or in case of failure - * of the HSE used directly or indirectly as system clock (if the Clock - * Security System CSS is enabled). - * @note HSI can not be stopped if it is used as system clock source. In this case, - * you have to select another source of the system clock then stop the HSI. - * @note After enabling the HSI, the application software should wait on HSIRDY - * flag to be set indicating that HSI clock is stable and can be used as - * system clock source. - * This parameter can be: ENABLE or DISABLE. - * @note When the HSI is stopped, HSIRDY flag goes low after 6 HSI oscillator - * clock cycles. - */ -#define __HAL_RCC_HSI_ENABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = ENABLE) -#define __HAL_RCC_HSI_DISABLE() (*(__IO uint32_t *) RCC_CR_HSION_BB = DISABLE) - -/** @brief Macro to adjust the Internal High Speed oscillator (HSI) calibration value. - * @note The calibration is used to compensate for the variations in voltage - * and temperature that influence the frequency of the internal HSI RC. - * @param __HSICalibrationValue__: specifies the calibration trimming value. - * This parameter must be a number between 0 and 0x1F. - */ -#define __HAL_RCC_HSI_CALIBRATIONVALUE_ADJUST(__HSICalibrationValue__) (MODIFY_REG(RCC->CR,\ - RCC_CR_HSITRIM, (uint32_t)(__HSICalibrationValue__) << POSITION_VAL(RCC_CR_HSITRIM))) -/** - * @} - */ - -/** @defgroup RCC_LSI_Configuration LSI Configuration - * @{ - */ - -/** @brief Macros to enable or disable the Internal Low Speed oscillator (LSI). - * @note After enabling the LSI, the application software should wait on - * LSIRDY flag to be set indicating that LSI clock is stable and can - * be used to clock the IWDG and/or the RTC. - * @note LSI can not be disabled if the IWDG is running. - * @note When the LSI is stopped, LSIRDY flag goes low after 6 LSI oscillator - * clock cycles. - */ -#define __HAL_RCC_LSI_ENABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = ENABLE) -#define __HAL_RCC_LSI_DISABLE() (*(__IO uint32_t *) RCC_CSR_LSION_BB = DISABLE) -/** - * @} - */ - -/** @defgroup RCC_HSE_Configuration HSE Configuration - * @{ - */ - -/** - * @brief Macro to configure the External High Speed oscillator (HSE). - * @note Transition HSE Bypass to HSE On and HSE On to HSE Bypass are not supported by this macro. - * User should request a transition to HSE Off first and then HSE On or HSE Bypass. - * @note After enabling the HSE (RCC_HSE_ON or RCC_HSE_Bypass), the application - * software should wait on HSERDY flag to be set indicating that HSE clock - * is stable and can be used to clock the PLL and/or system clock. - * @note HSE state can not be changed if it is used directly or through the - * PLL as system clock. In this case, you have to select another source - * of the system clock then change the HSE state (ex. disable it). - * @note The HSE is stopped by hardware when entering STOP and STANDBY modes. - * @note This function reset the CSSON bit, so if the clock security system(CSS) - * was previously enabled you have to enable it again after calling this - * function. - * @param __STATE__: specifies the new state of the HSE. - * This parameter can be one of the following values: - * @arg RCC_HSE_OFF: turn OFF the HSE oscillator, HSERDY flag goes low after - * 6 HSE oscillator clock cycles. - * @arg RCC_HSE_ON: turn ON the HSE oscillator. - * @arg RCC_HSE_BYPASS: HSE oscillator bypassed with external clock. - */ -#define __HAL_RCC_HSE_CONFIG(__STATE__) (*(__IO uint8_t *) RCC_CR_BYTE2_ADDRESS = (__STATE__)) -/** - * @} - */ - -/** @defgroup RCC_LSE_Configuration LSE Configuration - * @{ - */ - -/** - * @brief Macro to configure the External Low Speed oscillator (LSE). - * @note Transition LSE Bypass to LSE On and LSE On to LSE Bypass are not supported by this macro. - * User should request a transition to LSE Off first and then LSE On or LSE Bypass. - * @note As the LSE is in the Backup domain and write access is denied to - * this domain after reset, you have to enable write access using - * HAL_PWR_EnableBkUpAccess() function before to configure the LSE - * (to be done once after reset). - * @note After enabling the LSE (RCC_LSE_ON or RCC_LSE_BYPASS), the application - * software should wait on LSERDY flag to be set indicating that LSE clock - * is stable and can be used to clock the RTC. - * @param __STATE__: specifies the new state of the LSE. - * This parameter can be one of the following values: - * @arg RCC_LSE_OFF: turn OFF the LSE oscillator, LSERDY flag goes low after - * 6 LSE oscillator clock cycles. - * @arg RCC_LSE_ON: turn ON the LSE oscillator. - * @arg RCC_LSE_BYPASS: LSE oscillator bypassed with external clock. - */ -#define __HAL_RCC_LSE_CONFIG(__STATE__) (*(__IO uint8_t *) RCC_BDCR_BYTE0_ADDRESS = (__STATE__)) - -/** - * @} - */ - -/** @defgroup RCC_Internal_RTC_Clock_Configuration RTC Clock Configuration - * @{ - */ - -/** @brief Macros to enable or disable the RTC clock. - * @note These macros must be used only after the RTC clock source was selected. - */ -#define __HAL_RCC_RTC_ENABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = ENABLE) -#define __HAL_RCC_RTC_DISABLE() (*(__IO uint32_t *) RCC_BDCR_RTCEN_BB = DISABLE) - -/** @brief Macros to configure the RTC clock (RTCCLK). - * @note As the RTC clock configuration bits are in the Backup domain and write - * access is denied to this domain after reset, you have to enable write - * access using the Power Backup Access macro before to configure - * the RTC clock source (to be done once after reset). - * @note Once the RTC clock is configured it can't be changed unless the - * Backup domain is reset using __HAL_RCC_BackupReset_RELEASE() macro, or by - * a Power On Reset (POR). - * @param __RTCCLKSource__: specifies the RTC clock source. - * This parameter can be one of the following values: - * @arg RCC_RTCCLKSOURCE_LSE: LSE selected as RTC clock. - * @arg RCC_RTCCLKSOURCE_LSI: LSI selected as RTC clock. - * @arg RCC_RTCCLKSOURCE_HSE_DIVx: HSE clock divided by x selected - * as RTC clock, where x:[2,31] - * @note If the LSE or LSI is used as RTC clock source, the RTC continues to - * work in STOP and STANDBY modes, and can be used as wake-up source. - * However, when the HSE clock is used as RTC clock source, the RTC - * cannot be used in STOP and STANDBY modes. - * @note The maximum input clock frequency for RTC is 1MHz (when using HSE as - * RTC clock source). - */ -#define __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__) (((__RTCCLKSource__) & RCC_BDCR_RTCSEL) == RCC_BDCR_RTCSEL) ? \ - MODIFY_REG(RCC->CFGR, RCC_CFGR_RTCPRE, ((__RTCCLKSource__) & 0xFFFFCFF)) : CLEAR_BIT(RCC->CFGR, RCC_CFGR_RTCPRE) - -#define __HAL_RCC_RTC_CONFIG(__RTCCLKSource__) do { __HAL_RCC_RTC_CLKPRESCALER(__RTCCLKSource__); \ - RCC->BDCR |= ((__RTCCLKSource__) & 0x00000FFF); \ - } while (0) - -/** @brief Macros to force or release the Backup domain reset. - * @note This function resets the RTC peripheral (including the backup registers) - * and the RTC clock source selection in RCC_CSR register. - * @note The BKPSRAM is not affected by this reset. - */ -#define __HAL_RCC_BACKUPRESET_FORCE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = ENABLE) -#define __HAL_RCC_BACKUPRESET_RELEASE() (*(__IO uint32_t *) RCC_BDCR_BDRST_BB = DISABLE) -/** - * @} - */ - -/** @defgroup RCC_PLL_Configuration PLL Configuration - * @{ - */ - -/** @brief Macros to enable or disable the main PLL. - * @note After enabling the main PLL, the application software should wait on - * PLLRDY flag to be set indicating that PLL clock is stable and can - * be used as system clock source. - * @note The main PLL can not be disabled if it is used as system clock source - * @note The main PLL is disabled by hardware when entering STOP and STANDBY modes. - */ -#define __HAL_RCC_PLL_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = ENABLE) -#define __HAL_RCC_PLL_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLON_BB = DISABLE) -/** - * @} - */ - -/** @brief Macro to configure the PLL clock source. - * @note This function must be used only when the main PLL is disabled. - * @param __PLLSOURCE__: specifies the PLL entry clock source. - * This parameter can be one of the following values: - * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry - * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry - * - */ -#define __HAL_RCC_PLL_PLLSOURCE_CONFIG(__PLLSOURCE__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLSRC, (__PLLSOURCE__)) - -/** @brief Macro to configure the PLL multiplication factor. - * @note This function must be used only when the main PLL is disabled. - * @param __PLLM__: specifies the division factor for PLL VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 2 MHz to limit PLL jitter. - * - */ -#define __HAL_RCC_PLL_PLLM_CONFIG(__PLLM__) MODIFY_REG(RCC->PLLCFGR, RCC_PLLCFGR_PLLM, (__PLLM__)) - -/** @defgroup RCC_PLL_I2S_Configuration PLL I2S Configuration - * @{ - */ - -/** @brief Macros to enable or disable the PLLI2S. - * @note The PLLI2S is disabled by hardware when entering STOP and STANDBY modes. - */ -#define __HAL_RCC_PLLI2S_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = ENABLE) -#define __HAL_RCC_PLLI2S_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLI2SON_BB = DISABLE) -/** - * @} - */ - -/** @defgroup RCC_Get_Clock_source Get Clock source - * @{ - */ -/** - * @brief Macro to configure the system clock source. - * @param __RCC_SYSCLKSOURCE__: specifies the system clock source. - * This parameter can be one of the following values: - * - RCC_SYSCLKSOURCE_HSI: HSI oscillator is used as system clock source. - * - RCC_SYSCLKSOURCE_HSE: HSE oscillator is used as system clock source. - * - RCC_SYSCLKSOURCE_PLLCLK: PLL output is used as system clock source. - * - RCC_SYSCLKSOURCE_PLLRCLK: PLLR output is used as system clock source. - */ -#define __HAL_RCC_SYSCLK_CONFIG(__RCC_SYSCLKSOURCE__) MODIFY_REG(RCC->CFGR, RCC_CFGR_SW, (__RCC_SYSCLKSOURCE__)) - -/** @brief Macro to get the clock source used as system clock. - * @retval The clock source used as system clock. The returned value can be one - * of the following: - * - RCC_SYSCLKSOURCE_STATUS_HSI: HSI used as system clock. - * - RCC_SYSCLKSOURCE_STATUS_HSE: HSE used as system clock. - * - RCC_SYSCLKSOURCE_STATUS_PLLCLK: PLL used as system clock. - * - RCC_SYSCLKSOURCE_STATUS_PLLRCLK: PLLR used as system clock. - */ -#define __HAL_RCC_GET_SYSCLK_SOURCE() ((uint32_t)(RCC->CFGR & RCC_CFGR_SWS)) - -/** @brief Macro to get the oscillator used as PLL clock source. - * @retval The oscillator used as PLL clock source. The returned value can be one - * of the following: - * - RCC_PLLSOURCE_HSI: HSI oscillator is used as PLL clock source. - * - RCC_PLLSOURCE_HSE: HSE oscillator is used as PLL clock source. - */ -#define __HAL_RCC_GET_PLL_OSCSOURCE() ((uint32_t)(RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC)) -/** - * @} - */ - -/** @defgroup RCC_Flags_Interrupts_Management Flags Interrupts Management - * @brief macros to manage the specified RCC Flags and interrupts. - * @{ - */ - -/** @brief Enable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to enable - * the selected interrupts). - * @param __INTERRUPT__: specifies the RCC interrupt sources to be enabled. - * This parameter can be any combination of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt. - * @arg RCC_IT_LSERDY: LSE ready interrupt. - * @arg RCC_IT_HSIRDY: HSI ready interrupt. - * @arg RCC_IT_HSERDY: HSE ready interrupt. - * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. - */ -#define __HAL_RCC_ENABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS |= (__INTERRUPT__)) - -/** @brief Disable RCC interrupt (Perform Byte access to RCC_CIR[14:8] bits to disable - * the selected interrupts). - * @param __INTERRUPT__: specifies the RCC interrupt sources to be disabled. - * This parameter can be any combination of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt. - * @arg RCC_IT_LSERDY: LSE ready interrupt. - * @arg RCC_IT_HSIRDY: HSI ready interrupt. - * @arg RCC_IT_HSERDY: HSE ready interrupt. - * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. - */ -#define __HAL_RCC_DISABLE_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE1_ADDRESS &= ~(__INTERRUPT__)) - -/** @brief Clear the RCC's interrupt pending bits (Perform Byte access to RCC_CIR[23:16] - * bits to clear the selected interrupt pending bits. - * @param __INTERRUPT__: specifies the interrupt pending bit to clear. - * This parameter can be any combination of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt. - * @arg RCC_IT_LSERDY: LSE ready interrupt. - * @arg RCC_IT_HSIRDY: HSI ready interrupt. - * @arg RCC_IT_HSERDY: HSE ready interrupt. - * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. - * @arg RCC_IT_CSS: Clock Security System interrupt - */ -#define __HAL_RCC_CLEAR_IT(__INTERRUPT__) (*(__IO uint8_t *) RCC_CIR_BYTE2_ADDRESS = (__INTERRUPT__)) - -/** @brief Check the RCC's interrupt has occurred or not. - * @param __INTERRUPT__: specifies the RCC interrupt source to check. - * This parameter can be one of the following values: - * @arg RCC_IT_LSIRDY: LSI ready interrupt. - * @arg RCC_IT_LSERDY: LSE ready interrupt. - * @arg RCC_IT_HSIRDY: HSI ready interrupt. - * @arg RCC_IT_HSERDY: HSE ready interrupt. - * @arg RCC_IT_PLLRDY: Main PLL ready interrupt. - * @arg RCC_IT_PLLI2SRDY: PLLI2S ready interrupt. - * @arg RCC_IT_CSS: Clock Security System interrupt - * @retval The new state of __INTERRUPT__ (TRUE or FALSE). - */ -#define __HAL_RCC_GET_IT(__INTERRUPT__) ((RCC->CIR & (__INTERRUPT__)) == (__INTERRUPT__)) - -/** @brief Set RMVF bit to clear the reset flags: RCC_FLAG_PINRST, RCC_FLAG_PORRST, - * RCC_FLAG_SFTRST, RCC_FLAG_IWDGRST, RCC_FLAG_WWDGRST and RCC_FLAG_LPWRRST. - */ -#define __HAL_RCC_CLEAR_RESET_FLAGS() (RCC->CSR |= RCC_CSR_RMVF) - -/** @brief Check RCC flag is set or not. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg RCC_FLAG_HSIRDY: HSI oscillator clock ready. - * @arg RCC_FLAG_HSERDY: HSE oscillator clock ready. - * @arg RCC_FLAG_PLLRDY: Main PLL clock ready. - * @arg RCC_FLAG_PLLI2SRDY: PLLI2S clock ready. - * @arg RCC_FLAG_LSERDY: LSE oscillator clock ready. - * @arg RCC_FLAG_LSIRDY: LSI oscillator clock ready. - * @arg RCC_FLAG_BORRST: POR/PDR or BOR reset. - * @arg RCC_FLAG_PINRST: Pin reset. - * @arg RCC_FLAG_PORRST: POR/PDR reset. - * @arg RCC_FLAG_SFTRST: Software reset. - * @arg RCC_FLAG_IWDGRST: Independent Watchdog reset. - * @arg RCC_FLAG_WWDGRST: Window Watchdog reset. - * @arg RCC_FLAG_LPWRRST: Low Power reset. - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define RCC_FLAG_MASK ((uint8_t)0x1F) -#define __HAL_RCC_GET_FLAG(__FLAG__) (((((((__FLAG__) >> 5) == 1)? RCC->CR :((((__FLAG__) >> 5) == 2) ? RCC->BDCR :((((__FLAG__) >> 5) == 3)? RCC->CSR :RCC->CIR))) & ((uint32_t)1 << ((__FLAG__) & RCC_FLAG_MASK)))!= 0)? 1 : 0) - -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ - /** @addtogroup RCC_Exported_Functions - * @{ - */ - -/** @addtogroup RCC_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions ******************************/ -void HAL_RCC_DeInit(void); -HAL_StatusTypeDef HAL_RCC_OscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); -HAL_StatusTypeDef HAL_RCC_ClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t FLatency); -/** - * @} - */ - -/** @addtogroup RCC_Exported_Functions_Group2 - * @{ - */ -/* Peripheral Control functions ************************************************/ -void HAL_RCC_MCOConfig(uint32_t RCC_MCOx, uint32_t RCC_MCOSource, uint32_t RCC_MCODiv); -void HAL_RCC_EnableCSS(void); -void HAL_RCC_DisableCSS(void); -uint32_t HAL_RCC_GetSysClockFreq(void); -uint32_t HAL_RCC_GetHCLKFreq(void); -uint32_t HAL_RCC_GetPCLK1Freq(void); -uint32_t HAL_RCC_GetPCLK2Freq(void); -void HAL_RCC_GetOscConfig(RCC_OscInitTypeDef *RCC_OscInitStruct); -void HAL_RCC_GetClockConfig(RCC_ClkInitTypeDef *RCC_ClkInitStruct, uint32_t *pFLatency); - -/* CSS NMI IRQ handler */ -void HAL_RCC_NMI_IRQHandler(void); - -/* User Callbacks in non blocking mode (IT mode) */ -void HAL_RCC_CSSCallback(void); - -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup RCC_Private_Constants RCC Private Constants - * @{ - */ - -/** @defgroup RCC_BitAddress_AliasRegion RCC BitAddress AliasRegion - * @brief RCC registers bit address in the alias region - * @{ - */ -#define RCC_OFFSET (RCC_BASE - PERIPH_BASE) -/* --- CR Register ---*/ -/* Alias word address of HSION bit */ -#define RCC_CR_OFFSET (RCC_OFFSET + 0x00) -#define RCC_HSION_BIT_NUMBER 0x00 -#define RCC_CR_HSION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_HSION_BIT_NUMBER * 4)) -/* Alias word address of CSSON bit */ -#define RCC_CSSON_BIT_NUMBER 0x13 -#define RCC_CR_CSSON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_CSSON_BIT_NUMBER * 4)) -/* Alias word address of PLLON bit */ -#define RCC_PLLON_BIT_NUMBER 0x18 -#define RCC_CR_PLLON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_PLLON_BIT_NUMBER * 4)) -/* Alias word address of PLLI2SON bit */ -#define RCC_PLLI2SON_BIT_NUMBER 0x1A -#define RCC_CR_PLLI2SON_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_PLLI2SON_BIT_NUMBER * 4)) - -/* --- CFGR Register ---*/ -/* Alias word address of I2SSRC bit */ -#define RCC_CFGR_OFFSET (RCC_OFFSET + 0x08) -#define RCC_I2SSRC_BIT_NUMBER 0x17 -#define RCC_CFGR_I2SSRC_BB (PERIPH_BB_BASE + (RCC_CFGR_OFFSET * 32) + (RCC_I2SSRC_BIT_NUMBER * 4)) - -/* --- BDCR Register ---*/ -/* Alias word address of RTCEN bit */ -#define RCC_BDCR_OFFSET (RCC_OFFSET + 0x70) -#define RCC_RTCEN_BIT_NUMBER 0x0F -#define RCC_BDCR_RTCEN_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32) + (RCC_RTCEN_BIT_NUMBER * 4)) -/* Alias word address of BDRST bit */ -#define RCC_BDRST_BIT_NUMBER 0x10 -#define RCC_BDCR_BDRST_BB (PERIPH_BB_BASE + (RCC_BDCR_OFFSET * 32) + (RCC_BDRST_BIT_NUMBER * 4)) - -/* --- CSR Register ---*/ -/* Alias word address of LSION bit */ -#define RCC_CSR_OFFSET (RCC_OFFSET + 0x74) -#define RCC_LSION_BIT_NUMBER 0x00 -#define RCC_CSR_LSION_BB (PERIPH_BB_BASE + (RCC_CSR_OFFSET * 32) + (RCC_LSION_BIT_NUMBER * 4)) - -/* CR register byte 3 (Bits[23:16]) base address */ -#define RCC_CR_BYTE2_ADDRESS ((uint32_t)0x40023802) - -/* CIR register byte 2 (Bits[15:8]) base address */ -#define RCC_CIR_BYTE1_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x01)) - -/* CIR register byte 3 (Bits[23:16]) base address */ -#define RCC_CIR_BYTE2_ADDRESS ((uint32_t)(RCC_BASE + 0x0C + 0x02)) - -/* BDCR register base address */ -#define RCC_BDCR_BYTE0_ADDRESS (PERIPH_BASE + RCC_BDCR_OFFSET) - -#define RCC_DBP_TIMEOUT_VALUE ((uint32_t)100) -#define RCC_LSE_TIMEOUT_VALUE ((uint32_t)5000) - -#define HSE_TIMEOUT_VALUE HSE_STARTUP_TIMEOUT -#define HSI_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */ -#define LSI_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */ - -#define PLLI2S_TIMEOUT_VALUE ((uint32_t)100) /* Timeout value fixed to 100 ms */ -#define PLLSAI_TIMEOUT_VALUE ((uint32_t)100) /* Timeout value fixed to 100 ms */ -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup RCC_Private_Macros RCC Private Macros - * @{ - */ - -/** @defgroup RCC_IS_RCC_Definitions RCC Private macros to check input parameters - * @{ - */ -#define IS_RCC_OSCILLATORTYPE(OSCILLATOR) ((OSCILLATOR) <= 15) - -#define IS_RCC_HSE(HSE) (((HSE) == RCC_HSE_OFF) || ((HSE) == RCC_HSE_ON) || \ - ((HSE) == RCC_HSE_BYPASS)) - -#define IS_RCC_LSE(LSE) (((LSE) == RCC_LSE_OFF) || ((LSE) == RCC_LSE_ON) || \ - ((LSE) == RCC_LSE_BYPASS)) - -#define IS_RCC_HSI(HSI) (((HSI) == RCC_HSI_OFF) || ((HSI) == RCC_HSI_ON)) - -#define IS_RCC_LSI(LSI) (((LSI) == RCC_LSI_OFF) || ((LSI) == RCC_LSI_ON)) - -#define IS_RCC_PLL(PLL) (((PLL) == RCC_PLL_NONE) ||((PLL) == RCC_PLL_OFF) || ((PLL) == RCC_PLL_ON)) - -#define IS_RCC_PLLSOURCE(SOURCE) (((SOURCE) == RCC_PLLSOURCE_HSI) || \ - ((SOURCE) == RCC_PLLSOURCE_HSE)) - -#define IS_RCC_SYSCLKSOURCE(SOURCE) (((SOURCE) == RCC_SYSCLKSOURCE_HSI) || \ - ((SOURCE) == RCC_SYSCLKSOURCE_HSE) || \ - ((SOURCE) == RCC_SYSCLKSOURCE_PLLCLK) || \ - ((SOURCE) == RCC_SYSCLKSOURCE_PLLRCLK)) - -#define IS_RCC_PLLM_VALUE(VALUE) ((VALUE) <= 63) - -#define IS_RCC_PLLN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432)) - -#define IS_RCC_PLLP_VALUE(VALUE) (((VALUE) == 2) || ((VALUE) == 4) || ((VALUE) == 6) || ((VALUE) == 8)) - -#define IS_RCC_PLLQ_VALUE(VALUE) ((4 <= (VALUE)) && ((VALUE) <= 15)) - -#define IS_RCC_HCLK(HCLK) (((HCLK) == RCC_SYSCLK_DIV1) || ((HCLK) == RCC_SYSCLK_DIV2) || \ - ((HCLK) == RCC_SYSCLK_DIV4) || ((HCLK) == RCC_SYSCLK_DIV8) || \ - ((HCLK) == RCC_SYSCLK_DIV16) || ((HCLK) == RCC_SYSCLK_DIV64) || \ - ((HCLK) == RCC_SYSCLK_DIV128) || ((HCLK) == RCC_SYSCLK_DIV256) || \ - ((HCLK) == RCC_SYSCLK_DIV512)) - -#define IS_RCC_CLOCKTYPE(CLK) ((1 <= (CLK)) && ((CLK) <= 15)) - -#define IS_RCC_PCLK(PCLK) (((PCLK) == RCC_HCLK_DIV1) || ((PCLK) == RCC_HCLK_DIV2) || \ - ((PCLK) == RCC_HCLK_DIV4) || ((PCLK) == RCC_HCLK_DIV8) || \ - ((PCLK) == RCC_HCLK_DIV16)) - -#define IS_RCC_MCO(MCOx) (((MCOx) == RCC_MCO1) || ((MCOx) == RCC_MCO2)) - -#define IS_RCC_MCO1SOURCE(SOURCE) (((SOURCE) == RCC_MCO1SOURCE_HSI) || ((SOURCE) == RCC_MCO1SOURCE_LSE) || \ - ((SOURCE) == RCC_MCO1SOURCE_HSE) || ((SOURCE) == RCC_MCO1SOURCE_PLLCLK)) - -#define IS_RCC_MCO2SOURCE(SOURCE) (((SOURCE) == RCC_MCO2SOURCE_SYSCLK) || ((SOURCE) == RCC_MCO2SOURCE_PLLI2SCLK)|| \ - ((SOURCE) == RCC_MCO2SOURCE_HSE) || ((SOURCE) == RCC_MCO2SOURCE_PLLCLK)) - -#define IS_RCC_MCODIV(DIV) (((DIV) == RCC_MCODIV_1) || ((DIV) == RCC_MCODIV_2) || \ - ((DIV) == RCC_MCODIV_3) || ((DIV) == RCC_MCODIV_4) || \ - ((DIV) == RCC_MCODIV_5)) -#define IS_RCC_CALIBRATION_VALUE(VALUE) ((VALUE) <= 0x1F) - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_RCC_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h deleted file mode 100644 index 183b89d..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rcc_ex.h +++ /dev/null @@ -1,2707 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rcc_ex.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of RCC HAL Extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_RCC_EX_H -#define __STM32F4xx_HAL_RCC_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup RCCEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup RCCEx_Exported_Types RCCEx Exported Types - * @{ - */ - -/** - * @brief RCC PLL configuration structure definition - */ -typedef struct -{ - uint32_t PLLState; /*!< The new state of the PLL. - This parameter can be a value of @ref RCC_PLL_Config */ - - uint32_t PLLSource; /*!< RCC_PLLSource: PLL entry clock source. - This parameter must be a value of @ref RCC_PLL_Clock_Source */ - - uint32_t PLLM; /*!< PLLM: Division factor for PLL VCO input clock. - This parameter must be a number between Min_Data = 0 and Max_Data = 63 */ - - uint32_t PLLN; /*!< PLLN: Multiplication factor for PLL VCO output clock. - This parameter must be a number between Min_Data = 192 and Max_Data = 432 */ - - uint32_t PLLP; /*!< PLLP: Division factor for main system clock (SYSCLK). - This parameter must be a value of @ref RCC_PLLP_Clock_Divider */ - - uint32_t PLLQ; /*!< PLLQ: Division factor for OTG FS, SDIO and RNG clocks. - This parameter must be a number between Min_Data = 4 and Max_Data = 15 */ -#if defined(STM32F446xx) - uint32_t PLLR; /*!< PLLR: PLL division factor for I2S, SAI, SYSTEM, SPDIFRX clocks. - This parameter is only available in STM32F446xx devices. - This parameter must be a number between Min_Data = 2 and Max_Data = 7 */ -#endif /* STM32F446xx */ -}RCC_PLLInitTypeDef; - -#if defined(STM32F446xx) -/** - * @brief PLLI2S Clock structure definition - */ -typedef struct -{ - uint32_t PLLI2SM; /*!< Specifies division factor for PLL VCO input clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 63 */ - - uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 192 and Max_Data = 432 */ - - uint32_t PLLI2SP; /*!< Specifies division factor for SPDIFRX Clock. - This parameter must be a value of @ref RCCEx_PLLI2SP_Clock_Divider */ - - uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 15. - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ - - uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 7. - This parameter will be used only when PLLI2S is selected as Clock Source I2S */ -}RCC_PLLI2SInitTypeDef; - -/** - * @brief PLLSAI Clock structure definition - */ -typedef struct -{ - uint32_t PLLSAIM; /*!< Spcifies division factor for PLL VCO input clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 63 */ - - uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 192 and Max_Data = 432 */ - - uint32_t PLLSAIP; /*!< Specifies division factor for OTG FS, SDIO and RNG clocks. - This parameter must be a value of @ref RCCEx_PLLSAIP_Clock_Divider */ - - uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 15. - This parameter will be used only when PLLSAI is selected as Clock Source SAI */ -}RCC_PLLSAIInitTypeDef; -/** - * @brief RCC extended clocks structure definition - */ -typedef struct -{ - uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. - This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ - - RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */ - - uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ - - uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLLSAI is selected as Clock Source SAI */ - - uint32_t Sai1ClockSelection; /*!< Specifies SAI1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_SAI1_Clock_Source */ - - uint32_t Sai2ClockSelection; /*!< Specifies SAI2 Clock Source Selection. - This parameter can be a value of @ref RCCEx_SAI2_Clock_Source */ - - uint32_t I2sApb1ClockSelection; /*!< Specifies I2S APB1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_I2SAPB1_Clock_Source */ - - uint32_t I2sApb2ClockSelection; /*!< Specifies I2S APB2 Clock Source Selection. - This parameter can be a value of @ref RCCEx_I2SAPB2_Clock_Source */ - - uint32_t RTCClockSelection; /*!< Specifies RTC Clock Source Selection. - This parameter can be a value of @ref RCC_RTC_Clock_Source */ - - uint32_t SdioClockSelection; /*!< Specifies SDIO Clock Source Selection. - This parameter can be a value of @ref RCCEx_SDIO_Clock_Source */ - - uint32_t CecClockSelection; /*!< Specifies CEC Clock Source Selection. - This parameter can be a value of @ref RCCEx_CEC_Clock_Source */ - - uint32_t Fmpi2c1ClockSelection; /*!< Specifies FMPI2C1 Clock Source Selection. - This parameter can be a value of @ref RCCEx_FMPI2C1_Clock_Source */ - - uint32_t SpdifClockSelection; /*!< Specifies SPDIFRX Clock Source Selection. - This parameter can be a value of @ref RCCEx_SPDIFRX_Clock_Source */ - - uint32_t Clk48ClockSelection; /*!< Specifies CK48 Clock Selection this clock used OTG FS, SDIO and RNG clocks. - This parameter can be a value of @ref RCCEx_CK48_Clock_Source */ - - uint8_t TIMPresSelection; /*!< Specifies TIM Clock Source Selection. - This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ -}RCC_PeriphCLKInitTypeDef; -#endif /* STM32F446xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) - -/** - * @brief PLLI2S Clock structure definition - */ -typedef struct -{ - uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 192 and Max_Data = 432. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 7. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - uint32_t PLLI2SQ; /*!< Specifies the division factor for SAI1 clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 15. - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ -}RCC_PLLI2SInitTypeDef; - -/** - * @brief PLLSAI Clock structure definition - */ -typedef struct -{ - uint32_t PLLSAIN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 192 and Max_Data = 432. - This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */ - - uint32_t PLLSAIQ; /*!< Specifies the division factor for SAI1 clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 15. - This parameter will be used only when PLLSAI is selected as Clock Source SAI or LTDC */ - - uint32_t PLLSAIR; /*!< specifies the division factor for LTDC clock - This parameter must be a number between Min_Data = 2 and Max_Data = 7. - This parameter will be used only when PLLSAI is selected as Clock Source LTDC */ - -}RCC_PLLSAIInitTypeDef; -/** - * @brief RCC extended clocks structure definition - */ -typedef struct -{ - uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. - This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ - - RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - RCC_PLLSAIInitTypeDef PLLSAI; /*!< PLL SAI structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source SAI or LTDC */ - - uint32_t PLLI2SDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLLI2S is selected as Clock Source SAI */ - - uint32_t PLLSAIDivQ; /*!< Specifies the PLLI2S division factor for SAI1 clock. - This parameter must be a number between Min_Data = 1 and Max_Data = 32 - This parameter will be used only when PLLSAI is selected as Clock Source SAI */ - - uint32_t PLLSAIDivR; /*!< Specifies the PLLSAI division factor for LTDC clock. - This parameter must be one value of @ref RCCEx_PLLSAI_DIVR */ - - uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection. - This parameter can be a value of @ref RCC_RTC_Clock_Source */ - - uint8_t TIMPresSelection; /*!< Specifies TIM Clock Prescalers Selection. - This parameter can be a value of @ref RCCEx_TIM_PRescaler_Selection */ - -}RCC_PeriphCLKInitTypeDef; -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -/** - * @brief PLLI2S Clock structure definition - */ -typedef struct -{ -#if defined(STM32F411xE) - uint32_t PLLI2SM; /*!< PLLM: Division factor for PLLI2S VCO input clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 62 */ -#endif /* STM32F411xE */ - - uint32_t PLLI2SN; /*!< Specifies the multiplication factor for PLLI2S VCO output clock. - This parameter must be a number between Min_Data = 192 and Max_Data = 432 - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - uint32_t PLLI2SR; /*!< Specifies the division factor for I2S clock. - This parameter must be a number between Min_Data = 2 and Max_Data = 7. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - -}RCC_PLLI2SInitTypeDef; - - -/** - * @brief RCC extended clocks structure definition - */ -typedef struct -{ - uint32_t PeriphClockSelection; /*!< The Extended Clock to be configured. - This parameter can be a value of @ref RCCEx_Periph_Clock_Selection */ - - RCC_PLLI2SInitTypeDef PLLI2S; /*!< PLL I2S structure parameters. - This parameter will be used only when PLLI2S is selected as Clock Source I2S or SAI */ - - uint32_t RTCClockSelection; /*!< Specifies RTC Clock Prescalers Selection. - This parameter can be a value of @ref RCC_RTC_Clock_Source */ - -}RCC_PeriphCLKInitTypeDef; -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */ -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RCCEx_Exported_Constants RCCEx Exported Constants - * @{ - */ - -/** @defgroup RCCEx_Periph_Clock_Selection RCC Periph Clock Selection - * @{ - */ -/*------------------------------- Peripheral Clock source for STM32F446xx -----------------------------*/ -#if defined(STM32F446xx) -#define RCC_PERIPHCLK_I2S_APB1 ((uint32_t)0x00000001) -#define RCC_PERIPHCLK_I2S_APB2 ((uint32_t)0x00000002) -#define RCC_PERIPHCLK_SAI1 ((uint32_t)0x00000004) -#define RCC_PERIPHCLK_SAI2 ((uint32_t)0x00000008) -#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000010) -#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000020) -#define RCC_PERIPHCLK_CEC ((uint32_t)0x00000040) -#define RCC_PERIPHCLK_FMPI2C1 ((uint32_t)0x00000080) -#define RCC_PERIPHCLK_CK48 ((uint32_t)0x00000100) -#define RCC_PERIPHCLK_SDIO ((uint32_t)0x00000200) -#define RCC_PERIPHCLK_SPDIFRX ((uint32_t)0x00000400) -#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000800) -#endif /* STM32F446xx */ -/*-----------------------------------------------------------------------------------------------------*/ - -/*--------------- Peripheral Clock source for STM32F42xxx/STM32F43xxx ---------------------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001) -#define RCC_PERIPHCLK_SAI_PLLI2S ((uint32_t)0x00000002) -#define RCC_PERIPHCLK_SAI_PLLSAI ((uint32_t)0x00000004) -#define RCC_PERIPHCLK_LTDC ((uint32_t)0x00000008) -#define RCC_PERIPHCLK_TIM ((uint32_t)0x00000010) -#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000020) -#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000040) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ -/*-----------------------------------------------------------------------------------------------------*/ - -/*------------------------ Peripheral Clock source for STM32F40xxx/STM32F41xxx ------------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -#define RCC_PERIPHCLK_I2S ((uint32_t)0x00000001) -#define RCC_PERIPHCLK_RTC ((uint32_t)0x00000002) -#define RCC_PERIPHCLK_PLLI2S ((uint32_t)0x00000004) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */ -/*-----------------------------------------------------------------------------------------------------*/ -/** - * @} - */ - -/** @defgroup RCCEx_PLLSAI_DIVR RCC PLLSAI DIVR - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) -#define RCC_PLLSAIDIVR_2 ((uint32_t)0x00000000) -#define RCC_PLLSAIDIVR_4 ((uint32_t)0x00010000) -#define RCC_PLLSAIDIVR_8 ((uint32_t)0x00020000) -#define RCC_PLLSAIDIVR_16 ((uint32_t)0x00030000) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */ -/** - * @} - */ - -/** @defgroup RCCEx_PLLI2SP_Clock_Divider RCC PLLI2SP Clock Divider - * @{ - */ -#if defined(STM32F446xx) -#define RCC_PLLI2SP_DIV2 ((uint32_t)0x00000002) -#define RCC_PLLI2SP_DIV4 ((uint32_t)0x00000004) -#define RCC_PLLI2SP_DIV6 ((uint32_t)0x00000006) -#define RCC_PLLI2SP_DIV8 ((uint32_t)0x00000008) -#endif /* STM32F446xx */ -/** - * @} - */ - -/** @defgroup RCCEx_PLLSAIP_Clock_Divider RCC PLLSAIP Clock Divider - * @{ - */ -#if defined(STM32F446xx) -#define RCC_PLLSAIP_DIV2 ((uint32_t)0x00000002) -#define RCC_PLLSAIP_DIV4 ((uint32_t)0x00000004) -#define RCC_PLLSAIP_DIV6 ((uint32_t)0x00000006) -#define RCC_PLLSAIP_DIV8 ((uint32_t)0x00000008) -#endif /* STM32F446xx */ -/** - * @} - */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -/** @defgroup RCCEx_SAI_BlockA_Clock_Source RCC SAI BlockA Clock Source - * @{ - */ -#define RCC_SAIACLKSOURCE_PLLSAI ((uint32_t)0x00000000) -#define RCC_SAIACLKSOURCE_PLLI2S ((uint32_t)0x00100000) -#define RCC_SAIACLKSOURCE_EXT ((uint32_t)0x00200000) -/** - * @} - */ - -/** @defgroup RCCEx_SAI_BlockB_Clock_Source RCC SAI BlockB Clock Source - * @{ - */ -#define RCC_SAIBCLKSOURCE_PLLSAI ((uint32_t)0x00000000) -#define RCC_SAIBCLKSOURCE_PLLI2S ((uint32_t)0x00400000) -#define RCC_SAIBCLKSOURCE_EXT ((uint32_t)0x00800000) -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -#if defined(STM32F446xx) -/** @defgroup RCCEx_SAI1_Clock_Source RCC SAI1 Clock Source - * @{ - */ -#define RCC_SAI1CLKSOURCE_PLLSAI ((uint32_t)0x00000000) -#define RCC_SAI1CLKSOURCE_PLLI2S ((uint32_t)RCC_DCKCFGR_SAI1SRC_0) -#define RCC_SAI1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI1SRC_1) -#define RCC_SAI1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_SAI1SRC) -/** - * @} - */ - -/** @defgroup RCCEx_SAI2_Clock_Source RCC SAI2 Clock Source - * @{ - */ -#define RCC_SAI2CLKSOURCE_PLLSAI ((uint32_t)0x00000000) -#define RCC_SAI2CLKSOURCE_PLLI2S ((uint32_t)RCC_DCKCFGR_SAI2SRC_0) -#define RCC_SAI2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_SAI2SRC_1) -#define RCC_SAI2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_SAI2SRC) -/** - * @} - */ - -/** @defgroup RCCEx_I2SAPB1_Clock_Source RCC I2S APB1 Clock Source - * @{ - */ -#define RCC_I2SAPB1CLKSOURCE_PLLI2S ((uint32_t)0x00000000) -#define RCC_I2SAPB1CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S1SRC_0) -#define RCC_I2SAPB1CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S1SRC_1) -#define RCC_I2SAPB1CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S1SRC) -/** - * @} - */ - -/** @defgroup RCCEx_I2SAPB2_Clock_Source RCC I2S APB2 Clock Source - * @{ - */ -#define RCC_I2SAPB2CLKSOURCE_PLLI2S ((uint32_t)0x00000000) -#define RCC_I2SAPB2CLKSOURCE_EXT ((uint32_t)RCC_DCKCFGR_I2S2SRC_0) -#define RCC_I2SAPB2CLKSOURCE_PLLR ((uint32_t)RCC_DCKCFGR_I2S2SRC_1) -#define RCC_I2SAPB2CLKSOURCE_PLLSRC ((uint32_t)RCC_DCKCFGR_I2S2SRC) -/** - * @} - */ - -/** @defgroup RCCEx_FMPI2C1_Clock_Source RCC FMPI2C1 Clock Source - * @{ - */ -#define RCC_FMPI2C1CLKSOURCE_APB ((uint32_t)0x00000000) -#define RCC_FMPI2C1CLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_0) -#define RCC_FMPI2C1CLKSOURCE_HSI ((uint32_t)RCC_DCKCFGR2_FMPI2C1SEL_1) -/** - * @} - */ - -/** @defgroup RCCEx_CEC_Clock_Source RCC CEC Clock Source - * @{ - */ -#define RCC_CECCLKSOURCE_HSI ((uint32_t)0x00000000) -#define RCC_CECCLKSOURCE_LSE ((uint32_t)RCC_DCKCFGR2_CECSEL) -/** - * @} - */ - -/** @defgroup RCCEx_CK48_Clock_Source RCC CK48 Clock Source - * @{ - */ -#define RCC_CK48CLKSOURCE_PLLQ ((uint32_t)0x00000000) -#define RCC_CK48CLKSOURCE_PLLSAIP ((uint32_t)RCC_DCKCFGR2_CK48MSEL) -/** - * @} - */ - -/** @defgroup RCCEx_SDIO_Clock_Source RCC SDIO Clock Source - * @{ - */ -#define RCC_SDIOCLKSOURCE_CK48 ((uint32_t)0x00000000) -#define RCC_SDIOCLKSOURCE_SYSCLK ((uint32_t)RCC_DCKCFGR2_SDIOSEL) -/** - * @} - */ - -/** @defgroup RCCEx_SPDIFRX_Clock_Source RCC SPDIFRX Clock Source - * @{ - */ -#define RCC_SPDIFRXCLKSOURCE_PLLR ((uint32_t)0x00000000) -#define RCC_SPDIFRXCLKSOURCE_PLLI2SP ((uint32_t)RCC_DCKCFGR2_SPDIFRXSEL) -/** - * @} - */ - -#endif /* STM32F446xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) -/** @defgroup RCCEx_TIM_PRescaler_Selection RCC TIM PRescaler Selection - * @{ - */ -#define RCC_TIMPRES_DESACTIVATED ((uint8_t)0x00) -#define RCC_TIMPRES_ACTIVATED ((uint8_t)0x01) -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx) || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */ - -#if defined(STM32F411xE) || defined(STM32F446xx) -/** @defgroup RCCEx_LSE_Dual_Mode_Selection RCC LSE Dual Mode Selection - * @{ - */ -#define RCC_LSE_LOWPOWER_MODE ((uint8_t)0x00) -#define RCC_LSE_HIGHDRIVE_MODE ((uint8_t)0x01) -/** - * @} - */ -#endif /* STM32F411xE || STM32F446xx */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup RCCEx_Exported_Macros RCCEx Exported Macros - * @{ - */ -/*------------------------------- STM32F42xxx/STM32F43xxx ----------------------------------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -/** @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_GPIOJ_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOJEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_GPIOK_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOKEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_DMA2D_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_DMA2DEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) -#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) -#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN)) -#define __HAL_RCC_GPIOJ_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOJEN)) -#define __HAL_RCC_GPIOK_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOKEN)) -#define __HAL_RCC_DMA2D_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_DMA2DEN)) -#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN)) -#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN)) -#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN)) -#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN)) - -/** - * @brief Enable ETHERNET clock. - */ -#define __HAL_RCC_ETH_CLK_ENABLE() do { \ - __HAL_RCC_ETHMAC_CLK_ENABLE(); \ - __HAL_RCC_ETHMACTX_CLK_ENABLE(); \ - __HAL_RCC_ETHMACRX_CLK_ENABLE(); \ - } while(0) -/** - * @brief Disable ETHERNET clock. - */ -#define __HAL_RCC_ETH_CLK_DISABLE() do { \ - __HAL_RCC_ETHMACTX_CLK_DISABLE(); \ - __HAL_RCC_ETHMACRX_CLK_DISABLE(); \ - __HAL_RCC_ETHMAC_CLK_DISABLE(); \ - } while(0) - -/** @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ - -#define __HAL_RCC_DCMI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN)) - -#if defined(STM32F437xx)|| defined(STM32F439xx) -#define __HAL_RCC_CRYP_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_HASH_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN)) -#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN)) -#endif /* STM32F437xx || STM32F439xx */ - -/** @brief Enables or disables the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_FMC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN)) - -/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_USART3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_UART4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_UART5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_DAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_UART7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART7EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_UART8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART8EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) -#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) -#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) -#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) -#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) -#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) -#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) -#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) -#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) -#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) -#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) -#define __HAL_RCC_UART7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART7EN)) -#define __HAL_RCC_UART8_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART8EN)) - -/** @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_ADC2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_ADC3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_SPI6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI6EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_SAI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) -#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN)) -#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN)) -#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN)) -#define __HAL_RCC_SPI6_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI6EN)) -#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN)) - -#if defined(STM32F429xx)|| defined(STM32F439xx) -#define __HAL_RCC_LTDC_CLK_ENABLE() (RCC->APB2ENR |= (RCC_APB2ENR_LTDCEN)) - -#define __HAL_RCC_LTDC_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_LTDCEN)) -#endif /* STM32F429xx || STM32F439xx */ - -/** @brief Force or release AHB1 peripheral reset. - */ -#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST)) -#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST)) -#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_GPIOJ_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOJRST)) -#define __HAL_RCC_GPIOK_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOKRST)) -#define __HAL_RCC_DMA2D_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_DMA2DRST)) - -#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST)) -#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST)) -#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST)) -#define __HAL_RCC_GPIOJ_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOJRST)) -#define __HAL_RCC_GPIOK_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOKRST)) -#define __HAL_RCC_DMA2D_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_DMA2DRST)) - -/** @brief Force or release AHB2 peripheral reset. - */ -#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST)) -#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST)) - -#if defined(STM32F437xx)|| defined(STM32F439xx) -#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST)) -#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST)) - -#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST)) -#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST)) -#endif /* STM32F437xx || STM32F439xx */ - -/** @brief Force or release AHB3 peripheral reset - */ -#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST)) -#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST)) - -/** @brief Force or release APB1 peripheral reset. - */ -#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_UART7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART7RST)) -#define __HAL_RCC_UART8_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART8RST)) - -#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) -#define __HAL_RCC_UART7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART7RST)) -#define __HAL_RCC_UART8_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART8RST)) - -/** @brief Force or release APB2 peripheral reset. - */ -#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST)) -#define __HAL_RCC_SPI6_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI6RST)) -#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST)) - -#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST)) -#define __HAL_RCC_SPI6_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI6RST)) -#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST)) - -#if defined(STM32F429xx)|| defined(STM32F439xx) -#define __HAL_RCC_LTDC_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_LTDCRST)) -#define __HAL_RCC_LTDC_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_LTDCRST)) -#endif /* STM32F429xx|| STM32F439xx */ - -/** @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN)) -#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN)) -#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN)) -#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_GPIOJ_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOJLPEN)) -#define __HAL_RCC_GPIOK_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOKLPEN)) -#define __HAL_RCC_SRAM3_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM3LPEN)) -#define __HAL_RCC_DMA2D_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_DMA2DLPEN)) - -#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN)) -#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN)) -#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN)) -#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN)) -#define __HAL_RCC_GPIOJ_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOJLPEN)) -#define __HAL_RCC_GPIOK_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOKLPEN)) -#define __HAL_RCC_DMA2D_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_DMA2DLPEN)) - -/** @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) -#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN)) - -#if defined(STM32F437xx)|| defined(STM32F439xx) -#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN)) -#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN)) - -#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN)) -#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN)) -#endif /* STM32F437xx || STM32F439xx */ - -/** @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN)) -#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN)) - -/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_UART7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART7LPEN)) -#define __HAL_RCC_UART8_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART8LPEN)) - -#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) -#define __HAL_RCC_UART7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART7LPEN)) -#define __HAL_RCC_UART8_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART8LPEN)) - -/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN)) -#define __HAL_RCC_SPI6_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI6LPEN)) -#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN)) - -#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN)) -#define __HAL_RCC_SPI6_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI6LPEN)) -#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN)) - -#if defined(STM32F429xx)|| defined(STM32F439xx) -#define __HAL_RCC_LTDC_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_LTDCLPEN)) - -#define __HAL_RCC_LTDC_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_LTDCLPEN)) -#endif /* STM32F429xx || STM32F439xx */ - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx|| STM32F439xx */ -/*---------------------------------------------------------------------------------------------*/ - -/*----------------------------------- STM32F40xxx/STM32F41xxx----------------------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) -/** @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_GPIOI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOIEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) -#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) -#define __HAL_RCC_GPIOI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOIEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN)) - -#if defined(STM32F407xx)|| defined(STM32F417xx) -/** - * @brief Enable ETHERNET clock. - */ -#define __HAL_RCC_ETHMAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_ETHMACTX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACTXEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_ETHMACRX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACRXEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_ETHMACPTP_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_ETHMACPTPEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_ETH_CLK_ENABLE() do { \ - __HAL_RCC_ETHMAC_CLK_ENABLE(); \ - __HAL_RCC_ETHMACTX_CLK_ENABLE(); \ - __HAL_RCC_ETHMACRX_CLK_ENABLE(); \ - } while(0) - -/** - * @brief Disable ETHERNET clock. - */ -#define __HAL_RCC_ETHMAC_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACEN)) -#define __HAL_RCC_ETHMACTX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACTXEN)) -#define __HAL_RCC_ETHMACRX_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACRXEN)) -#define __HAL_RCC_ETHMACPTP_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_ETHMACPTPEN)) -#define __HAL_RCC_ETH_CLK_DISABLE() do { \ - __HAL_RCC_ETHMACTX_CLK_DISABLE(); \ - __HAL_RCC_ETHMACRX_CLK_DISABLE(); \ - __HAL_RCC_ETHMAC_CLK_DISABLE(); \ - } while(0) -#endif /* STM32F407xx || STM32F417xx */ - -/** @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#if defined(STM32F407xx)|| defined(STM32F417xx) -#define __HAL_RCC_DCMI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN)) -#endif /* STM32F407xx || STM32F417xx */ - -#if defined(STM32F415xx) || defined(STM32F417xx) -#define __HAL_RCC_CRYP_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_CRYPEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_HASH_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_HASHEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_CRYP_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_CRYPEN)) -#define __HAL_RCC_HASH_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_HASHEN)) -#endif /* STM32F415xx || STM32F417xx */ - -/** @brief Enables or disables the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_FSMC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_FSMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FSMCEN)) - -/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_USART3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_UART4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_UART5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_DAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) -#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) -#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) -#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) -#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) -#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) -#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) -#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) -#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) -#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) -#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) - -/** @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_ADC2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_ADC3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) -#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN)) -#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN)) - -/** @brief Force or release AHB1 peripheral reset. - */ -#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_GPIOI_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOIRST)) -#define __HAL_RCC_ETHMAC_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_ETHMACRST)) -#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST)) - -#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_GPIOI_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOIRST)) -#define __HAL_RCC_ETHMAC_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_ETHMACRST)) -#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST)) - -/** @brief Force or release AHB2 peripheral reset. - */ -#if defined(STM32F407xx)|| defined(STM32F417xx) -#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST)) -#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST)) -#endif /* STM32F407xx || STM32F417xx */ - -#if defined(STM32F415xx) || defined(STM32F417xx) -#define __HAL_RCC_CRYP_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_CRYPRST)) -#define __HAL_RCC_HASH_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_HASHRST)) - -#define __HAL_RCC_CRYP_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_CRYPRST)) -#define __HAL_RCC_HASH_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_HASHRST)) - -#endif /* STM32F415xx || STM32F417xx */ - -/** @brief Force or release AHB3 peripheral reset - */ -#define __HAL_RCC_FSMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FSMCRST)) -#define __HAL_RCC_FSMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FSMCRST)) - -/** @brief Force or release APB1 peripheral reset. - */ -#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) - -#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) - -/** @brief Force or release APB2 peripheral reset. - */ -#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) - -/** @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_GPIOI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOILPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_ETHMAC_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACLPEN)) -#define __HAL_RCC_ETHMACTX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACTXLPEN)) -#define __HAL_RCC_ETHMACRX_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACRXLPEN)) -#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_ETHMACPTPLPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN)) - -#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_GPIOI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOILPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_ETHMAC_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACLPEN)) -#define __HAL_RCC_ETHMACTX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACTXLPEN)) -#define __HAL_RCC_ETHMACRX_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACRXLPEN)) -#define __HAL_RCC_ETHMACPTP_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_ETHMACPTPLPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN)) - -/** @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#if defined(STM32F407xx)|| defined(STM32F417xx) -#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) -#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN)) -#endif /* STM32F407xx || STM32F417xx */ - -#if defined(STM32F415xx) || defined(STM32F417xx) -#define __HAL_RCC_CRYP_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_CRYPLPEN)) -#define __HAL_RCC_HASH_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_HASHLPEN)) - -#define __HAL_RCC_CRYP_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_CRYPLPEN)) -#define __HAL_RCC_HASH_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_HASHLPEN)) -#endif /* STM32F415xx || STM32F417xx */ - -/** @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_FSMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FSMCLPEN)) -#define __HAL_RCC_FSMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FSMCLPEN)) - -/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) - -#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) - -/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN)) - -#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN)) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ -/*---------------------------------------------------------------------------------------------*/ - -/*------------------------------------------ STM32F411xx --------------------------------------*/ -#if defined(STM32F411xE) -/** @brief Enable or disable the High Speed APB (APB2) peripheral clock. - */ -#define __HAL_RCC_SPI5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SPI5EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_SPI5_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SPI5EN)) - -/** @brief Force or release APB2 peripheral reset. - */ -#define __HAL_RCC_SPI5_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SPI5RST)) -#define __HAL_RCC_SPI5_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SPI5RST)) - -/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - */ -#define __HAL_RCC_SPI5_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SPI5LPEN)) -#define __HAL_RCC_SPI5_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SPI5LPEN)) - -#endif /* STM32F411xE */ -/*---------------------------------------------------------------------------------------------*/ - -/*----------------------------------------- STM32F446xx ---------------------------------------*/ -#if defined(STM32F446xx) -/** @brief Enables or disables the AHB1 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_GPIOF_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOFEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_GPIOG_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOGEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_USB_OTG_HS_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_OTGHSULPIEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_GPIOF_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOFEN)) -#define __HAL_RCC_GPIOG_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_GPIOGEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_DISABLE() (RCC->AHB1ENR &= ~(RCC_AHB1ENR_OTGHSULPIEN)) - -/** @brief Enable or disable the AHB2 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_DCMI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB2ENR, RCC_AHB2ENR_DCMIEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_DCMI_CLK_DISABLE() (RCC->AHB2ENR &= ~(RCC_AHB2ENR_DCMIEN)) - -/** @brief Enables or disables the AHB3 peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_FMC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_QSPI_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_QSPIEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_FMC_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_FMCEN)) -#define __HAL_RCC_QSPI_CLK_DISABLE() (RCC->AHB3ENR &= ~(RCC_AHB3ENR_QSPIEN)) - -/** @brief Enable or disable the Low Speed APB (APB1) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_TIM6_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM6EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_TIM7_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM7EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_TIM12_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM12EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_TIM13_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM13EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_TIM14_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_TIM14EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_SPDIFRX_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_SPDIFRXEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_USART3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_USART3EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_UART4_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART4EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_UART5_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_UART5EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_FMPI2C1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_FMPI2C1EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_CAN1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN1EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_CAN2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CAN2EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_CEC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_CECEN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_DAC_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB1ENR, RCC_APB1ENR_DACEN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM6_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM6EN)) -#define __HAL_RCC_TIM7_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM7EN)) -#define __HAL_RCC_TIM12_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM12EN)) -#define __HAL_RCC_TIM13_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM13EN)) -#define __HAL_RCC_TIM14_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_TIM14EN)) -#define __HAL_RCC_SPDIFRX_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_SPDIFRXEN)) -#define __HAL_RCC_USART3_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_USART3EN)) -#define __HAL_RCC_UART4_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART4EN)) -#define __HAL_RCC_UART5_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_UART5EN)) -#define __HAL_RCC_FMPI2C1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_FMPI2C1EN)) -#define __HAL_RCC_CAN1_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN1EN)) -#define __HAL_RCC_CAN2_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CAN2EN)) -#define __HAL_RCC_CEC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_CECEN)) -#define __HAL_RCC_DAC_CLK_DISABLE() (RCC->APB1ENR &= ~(RCC_APB1ENR_DACEN)) - -/** @brief Enable or disable the High Speed APB (APB2) peripheral clock. - * @note After reset, the peripheral clock (used for registers read/write access) - * is disabled and the application software has to enable this clock before - * using it. - */ -#define __HAL_RCC_TIM8_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_TIM8EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_ADC2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC2EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_ADC3_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_ADC3EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_SAI1_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI1EN);\ - UNUSED(tmpreg); \ - } while(0) -#define __HAL_RCC_SAI2_CLK_ENABLE() do { \ - __IO uint32_t tmpreg; \ - SET_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\ - /* Delay after an RCC peripheral clock enabling */ \ - tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_SAI2EN);\ - UNUSED(tmpreg); \ - } while(0) - -#define __HAL_RCC_TIM8_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_TIM8EN)) -#define __HAL_RCC_ADC2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC2EN)) -#define __HAL_RCC_ADC3_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_ADC3EN)) -#define __HAL_RCC_SAI1_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI1EN)) -#define __HAL_RCC_SAI2_CLK_DISABLE() (RCC->APB2ENR &= ~(RCC_APB2ENR_SAI2EN)) - -/** @brief Force or release AHB1 peripheral reset. - */ -#define __HAL_RCC_GPIOF_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_USB_OTG_HS_FORCE_RESET() (RCC->AHB1RSTR |= (RCC_AHB1RSTR_OTGHRST)) - -#define __HAL_RCC_GPIOF_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOFRST)) -#define __HAL_RCC_GPIOG_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_GPIOGRST)) -#define __HAL_RCC_USB_OTG_HS_RELEASE_RESET() (RCC->AHB1RSTR &= ~(RCC_AHB1RSTR_OTGHRST)) - -/** @brief Force or release AHB2 peripheral reset. - */ -#define __HAL_RCC_DCMI_FORCE_RESET() (RCC->AHB2RSTR |= (RCC_AHB2RSTR_DCMIRST)) -#define __HAL_RCC_DCMI_RELEASE_RESET() (RCC->AHB2RSTR &= ~(RCC_AHB2RSTR_DCMIRST)) - -/** @brief Force or release AHB3 peripheral reset - */ -#define __HAL_RCC_FMC_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_FMCRST)) -#define __HAL_RCC_QSPI_FORCE_RESET() (RCC->AHB3RSTR |= (RCC_AHB3RSTR_QSPIRST)) - -#define __HAL_RCC_FMC_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_FMCRST)) -#define __HAL_RCC_QSPI_RELEASE_RESET() (RCC->AHB3RSTR &= ~(RCC_AHB3RSTR_QSPIRST)) - -/** @brief Force or release APB1 peripheral reset. - */ -#define __HAL_RCC_TIM6_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_SPDIFRX_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_SPDIFRXRST)) -#define __HAL_RCC_USART3_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_FMPI2C1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_FMPI2C1RST)) -#define __HAL_RCC_CAN1_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_CEC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_CECRST)) -#define __HAL_RCC_DAC_FORCE_RESET() (RCC->APB1RSTR |= (RCC_APB1RSTR_DACRST)) - -#define __HAL_RCC_TIM6_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM6RST)) -#define __HAL_RCC_TIM7_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM7RST)) -#define __HAL_RCC_TIM12_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM12RST)) -#define __HAL_RCC_TIM13_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM13RST)) -#define __HAL_RCC_TIM14_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_TIM14RST)) -#define __HAL_RCC_SPDIFRX_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_SPDIFRXRST)) -#define __HAL_RCC_USART3_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_USART3RST)) -#define __HAL_RCC_UART4_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART4RST)) -#define __HAL_RCC_UART5_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_UART5RST)) -#define __HAL_RCC_FMPI2C1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_FMPI2C1RST)) -#define __HAL_RCC_CAN1_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN1RST)) -#define __HAL_RCC_CAN2_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CAN2RST)) -#define __HAL_RCC_CEC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_CECRST)) -#define __HAL_RCC_DAC_RELEASE_RESET() (RCC->APB1RSTR &= ~(RCC_APB1RSTR_DACRST)) - -/** @brief Force or release APB2 peripheral reset. - */ -#define __HAL_RCC_TIM8_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_SAI1_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI1RST)) -#define __HAL_RCC_SAI2_FORCE_RESET() (RCC->APB2RSTR |= (RCC_APB2RSTR_SAI2RST)) - -#define __HAL_RCC_TIM8_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_TIM8RST)) -#define __HAL_RCC_SAI1_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI1RST)) -#define __HAL_RCC_SAI2_RELEASE_RESET() (RCC->APB2RSTR &= ~(RCC_APB2RSTR_SAI2RST)) - -/** @brief Enable or disable the AHB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_GPIOF_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_ENABLE() (RCC->AHB1LPENR |= (RCC_AHB1LPENR_OTGHSULPILPEN)) - -#define __HAL_RCC_GPIOF_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOFLPEN)) -#define __HAL_RCC_GPIOG_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_GPIOGLPEN)) -#define __HAL_RCC_SRAM2_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_SRAM2LPEN)) -#define __HAL_RCC_USB_OTG_HS_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSLPEN)) -#define __HAL_RCC_USB_OTG_HS_ULPI_CLK_SLEEP_DISABLE() (RCC->AHB1LPENR &= ~(RCC_AHB1LPENR_OTGHSULPILPEN)) -/** @brief Enable or disable the AHB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_DCMI_CLK_SLEEP_ENABLE() (RCC->AHB2LPENR |= (RCC_AHB2LPENR_DCMILPEN)) -#define __HAL_RCC_DCMI_CLK_SLEEP_DISABLE() (RCC->AHB2LPENR &= ~(RCC_AHB2LPENR_DCMILPEN)) - -/** @brief Enable or disable the AHB3 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_FMC_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_FMCLPEN)) -#define __HAL_RCC_QSPI_CLK_SLEEP_ENABLE() (RCC->AHB3LPENR |= (RCC_AHB3LPENR_QSPILPEN)) - -#define __HAL_RCC_FMC_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_FMCLPEN)) -#define __HAL_RCC_QSPI_CLK_SLEEP_DISABLE() (RCC->AHB3LPENR &= ~(RCC_AHB3LPENR_QSPILPEN)) - -/** @brief Enable or disable the APB1 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_TIM6_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_SPDIFRX_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_SPDIFRXLPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_FMPI2C1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_FMPI2C1LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_CEC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_CECLPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_ENABLE() (RCC->APB1LPENR |= (RCC_APB1LPENR_DACLPEN)) - -#define __HAL_RCC_TIM6_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM6LPEN)) -#define __HAL_RCC_TIM7_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM7LPEN)) -#define __HAL_RCC_TIM12_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM12LPEN)) -#define __HAL_RCC_TIM13_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM13LPEN)) -#define __HAL_RCC_TIM14_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_TIM14LPEN)) -#define __HAL_RCC_SPDIFRX_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_SPDIFRXLPEN)) -#define __HAL_RCC_USART3_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_USART3LPEN)) -#define __HAL_RCC_UART4_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART4LPEN)) -#define __HAL_RCC_UART5_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_UART5LPEN)) -#define __HAL_RCC_FMPI2C1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_FMPI2C1LPEN)) -#define __HAL_RCC_CAN1_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN1LPEN)) -#define __HAL_RCC_CAN2_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CAN2LPEN)) -#define __HAL_RCC_CEC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_CECLPEN)) -#define __HAL_RCC_DAC_CLK_SLEEP_DISABLE() (RCC->APB1LPENR &= ~(RCC_APB1LPENR_DACLPEN)) - -/** @brief Enable or disable the APB2 peripheral clock during Low Power (Sleep) mode. - * @note Peripheral clock gating in SLEEP mode can be used to further reduce - * power consumption. - * @note After wakeup from SLEEP mode, the peripheral clock is enabled again. - * @note By default, all peripheral clocks are enabled during SLEEP mode. - */ -#define __HAL_RCC_TIM8_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_ADC3LPEN)) -#define __HAL_RCC_SAI1_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI1LPEN)) -#define __HAL_RCC_SAI2_CLK_SLEEP_ENABLE() (RCC->APB2LPENR |= (RCC_APB2LPENR_SAI2LPEN)) - -#define __HAL_RCC_TIM8_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_TIM8LPEN)) -#define __HAL_RCC_ADC2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC2LPEN)) -#define __HAL_RCC_ADC3_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_ADC3LPEN)) -#define __HAL_RCC_SAI1_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI1LPEN)) -#define __HAL_RCC_SAI2_CLK_SLEEP_DISABLE() (RCC->APB2LPENR &= ~(RCC_APB2LPENR_SAI2LPEN)) - -#endif /* STM32F446xx */ -/*------------------------------------------------------------------------------------------------------------*/ - -/*------------------------------------------------- PLL Configuration ----------------------------------------*/ -#if defined(STM32F446xx) -/** @brief Macro to configure the main PLL clock source, multiplication and division factors. - * @note This function must be used only when the main PLL is disabled. - * @param __RCC_PLLSource__: specifies the PLL entry clock source. - * This parameter can be one of the following values: - * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry - * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry - * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S. - * @param __PLLM__: specifies the division factor for PLL VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 2 MHz to limit PLL jitter. - * @param __PLLN__: specifies the multiplication factor for PLL VCO output clock - * This parameter must be a number between Min_Data = 192 and Max_Data = 432. - * @note You have to set the PLLN parameter correctly to ensure that the VCO - * output frequency is between 192 and 432 MHz. - * - * @param __PLLP__: specifies the division factor for main system clock (SYSCLK) - * This parameter must be a number in the range {2, 4, 6, or 8}. - * - * @param __PLLQ__: specifies the division factor for OTG FS, SDIO and RNG clocks - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * @note If the USB OTG FS is used in your application, you have to set the - * PLLQ parameter correctly to have 48 MHz clock for the USB. However, - * the SDIO and RNG need a frequency lower than or equal to 48 MHz to work - * correctly. - * - * @param __PLLR__: PLL division factor for I2S, SAI, SYSTEM, SPDIFRX clocks. - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note This parameter is only available in STM32F446xx devices. - * - */ -#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__,__PLLR__) \ - (RCC->PLLCFGR = ((__RCC_PLLSource__) | (__PLLM__) | \ - ((__PLLN__) << POSITION_VAL(RCC_PLLCFGR_PLLN)) | \ - ((((__PLLP__) >> 1) -1) << POSITION_VAL(RCC_PLLCFGR_PLLP)) | \ - ((__PLLQ__) << POSITION_VAL(RCC_PLLCFGR_PLLQ)) | \ - ((__PLLR__) << POSITION_VAL(RCC_PLLCFGR_PLLR)))) -#else -/** @brief Macro to configure the main PLL clock source, multiplication and division factors. - * @note This function must be used only when the main PLL is disabled. - * @param __RCC_PLLSource__: specifies the PLL entry clock source. - * This parameter can be one of the following values: - * @arg RCC_PLLSOURCE_HSI: HSI oscillator clock selected as PLL clock entry - * @arg RCC_PLLSOURCE_HSE: HSE oscillator clock selected as PLL clock entry - * @note This clock source (RCC_PLLSource) is common for the main PLL and PLLI2S. - * @param __PLLM__: specifies the division factor for PLL VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 2 MHz to limit PLL jitter. - * @param __PLLN__: specifies the multiplication factor for PLL VCO output clock - * This parameter must be a number between Min_Data = 192 and Max_Data = 432. - * @note You have to set the PLLN parameter correctly to ensure that the VCO - * output frequency is between 192 and 432 MHz. - * - * @param __PLLP__: specifies the division factor for main system clock (SYSCLK) - * This parameter must be a number in the range {2, 4, 6, or 8}. - * - * @param __PLLQ__: specifies the division factor for OTG FS, SDIO and RNG clocks - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * @note If the USB OTG FS is used in your application, you have to set the - * PLLQ parameter correctly to have 48 MHz clock for the USB. However, - * the SDIO and RNG need a frequency lower than or equal to 48 MHz to work - * correctly. - * - */ -#define __HAL_RCC_PLL_CONFIG(__RCC_PLLSource__, __PLLM__, __PLLN__, __PLLP__, __PLLQ__) \ - (RCC->PLLCFGR = (0x20000000 | (__RCC_PLLSource__) | (__PLLM__)| \ - ((__PLLN__) << POSITION_VAL(RCC_PLLCFGR_PLLN)) | \ - ((((__PLLP__) >> 1) -1) << POSITION_VAL(RCC_PLLCFGR_PLLP)) | \ - ((__PLLQ__) << POSITION_VAL(RCC_PLLCFGR_PLLQ)))) - #endif /* STM32F446xx */ -/*-------------------------------------------------------------------------------------------------------*/ - -/*------------------------------------------- PLLI2S Configuration --------------------------------------*/ -#if defined(STM32F446xx) -/** @brief Macro to configure the PLLI2S clock multiplication and division factors . - * @note This macro must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * HAL_RCC_ClockConfig() API). - * @param __PLLI2SM__: specifies the division factor for PLLI2S VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 1 MHz to limit PLLI2S jitter. - * @note The PLLI2SM parameter is only used with STM32F411xE and STM32F446xx Devices - * - * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock - * This parameter must be a number between Min_Data = 192 and Max_Data = 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 192 and Max_Data = 432 MHz. - * - * @param __PLLI2SP__: specifies division factor for SPDIFRX Clock. - * This parameter must be a number in the range {2, 4, 6, or 8}. - * @note the PLLI2SP parameter is only available with STM32F446xx Devices - * - * @param __PLLI2SR__: specifies the division factor for I2S clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - * - * @param __PLLI2SQ__: specifies the division factor for SAI clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * @note the PLLI2SQ parameter is only available with STM32F427/437/429x/439xx Devices - * - */ -#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SP__, __PLLI2SQ__, __PLLI2SR__) \ - (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\ - ((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) |\ - ((((__PLLI2SP__) >> 1) -1) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SP)) |\ - ((__PLLI2SQ__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SQ)) |\ - ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR)))) -#else -/** @brief Macro to configure the PLLI2S clock multiplication and division factors . - * @note This macro must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * HAL_RCC_ClockConfig() API). - * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock - * This parameter must be a number between Min_Data = 192 and Max_Data = 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 192 and Max_Data = 432 MHz. - * @param __PLLI2SR__: specifies the division factor for I2S clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - * - */ -#define __HAL_RCC_PLLI2S_CONFIG(__PLLI2SN__, __PLLI2SR__) \ - (RCC->PLLI2SCFGR = (((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) | \ - ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR)))) -#endif /* STM32F446xx */ - -#if defined(STM32F411xE) - -/** @brief Macro to configure the PLLI2S clock multiplication and division factors . - * @note This macro must be used only when the PLLI2S is disabled. - * @note This macro must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * HAL_RCC_ClockConfig() API). - * @param __PLLI2SM__: specifies the division factor for PLLI2S VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note The PLLI2SM parameter is only used with STM32F411xE Devices - * @note You have to set the PLLI2SM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 2 MHz to limit PLLI2S jitter. - * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock - * This parameter must be a number between Min_Data = 192 and Max_Data = 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 192 and Max_Data = 432 MHz. - * @param __PLLI2SR__: specifies the division factor for I2S clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - */ -#define __HAL_RCC_PLLI2S_I2SCLK_CONFIG(__PLLI2SM__, __PLLI2SN__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SM__) |\ - ((__PLLI2SN__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SN)) |\ - ((__PLLI2SR__) << POSITION_VAL(RCC_PLLI2SCFGR_PLLI2SR)))) -#endif /* STM32F411xE */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -/** @brief Macro used by the SAI HAL driver to configure the PLLI2S clock multiplication and division factors. - * @note This macro must be used only when the PLLI2S is disabled. - * @note PLLI2S clock source is common with the main PLL (configured in - * HAL_RCC_ClockConfig() API) - * @param __PLLI2SN__: specifies the multiplication factor for PLLI2S VCO output clock. - * This parameter must be a number between Min_Data = 192 and Max_Data = 432. - * @note You have to set the PLLI2SN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 192 and Max_Data = 432 MHz. - * @param __PLLI2SQ__: specifies the division factor for SAI1 clock. - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * @note the PLLI2SQ parameter is only available with STM32F427xx/437xx/429xx/439xx Devices - * and can be configured using the __HAL_RCC_PLLI2S_PLLSAICLK_CONFIG() macro - * @param __PLLI2SR__: specifies the division factor for I2S clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note You have to set the PLLI2SR parameter correctly to not exceed 192 MHz - * on the I2S clock frequency. - */ -#define __HAL_RCC_PLLI2S_SAICLK_CONFIG(__PLLI2SN__, __PLLI2SQ__, __PLLI2SR__) (RCC->PLLI2SCFGR = ((__PLLI2SN__) << 6) |\ - ((__PLLI2SQ__) << 24) |\ - ((__PLLI2SR__) << 28)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ -/*----------------------------------------------------------------------------------------------------------------*/ - -/*--------------------------------------------------- PLLSAI Configuration ---------------------------------------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) -/** @brief Macros to Enable or Disable the PLLISAI. - * @note The PLLSAI is only available with STM32F429x/439x Devices. - * @note The PLLSAI is disabled by hardware when entering STOP and STANDBY modes. - */ -#define __HAL_RCC_PLLSAI_ENABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = ENABLE) -#define __HAL_RCC_PLLSAI_DISABLE() (*(__IO uint32_t *) RCC_CR_PLLSAION_BB = DISABLE) - -#if defined(STM32F446xx) -/** @brief Macro to configure the PLLSAI clock multiplication and division factors. - * - * @param __PLLSAIM__: specifies the division factor for PLLSAI VCO input clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 63. - * @note You have to set the PLLSAIM parameter correctly to ensure that the VCO input - * frequency ranges from 1 to 2 MHz. It is recommended to select a frequency - * of 1 MHz to limit PLLI2S jitter. - * @note The PLLSAIM parameter is only used with STM32F446xx Devices - * - * @param __PLLSAIN__: specifies the multiplication factor for PLLSAI VCO output clock. - * This parameter must be a number between Min_Data = 192 and Max_Data = 432. - * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 192 and Max_Data = 432 MHz. - * - * @param __PLLSAIP__: specifies division factor for OTG FS, SDIO and RNG clocks. - * This parameter must be a number in the range {2, 4, 6, or 8}. - * @note the PLLSAIP parameter is only available with STM32F446xx Devices - * - * @param __PLLSAIQ__: specifies the division factor for SAI clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * - * @param __PLLSAIR__: specifies the division factor for LTDC clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note the PLLI2SR parameter is only available with STM32F427/437/429/439xx Devices - */ -#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIM__, __PLLSAIN__, __PLLSAIP__, __PLLSAIQ__, __PLLSAIR__) \ - (RCC->PLLSAICFGR = ((__PLLSAIM__) | \ - ((__PLLSAIN__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN)) | \ - ((((__PLLSAIP__) >> 1) -1) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIP)) | \ - ((__PLLSAIQ__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ)))) -#endif /* STM32F446xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -/** @brief Macro to configure the PLLSAI clock multiplication and division factors. - * - * @param __PLLSAIN__: specifies the multiplication factor for PLLSAI VCO output clock. - * This parameter must be a number between Min_Data = 192 and Max_Data = 432. - * @note You have to set the PLLSAIN parameter correctly to ensure that the VCO - * output frequency is between Min_Data = 192 and Max_Data = 432 MHz. - * - * @param __PLLSAIQ__: specifies the division factor for SAI clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 15. - * - * @param __PLLSAIR__: specifies the division factor for LTDC clock - * This parameter must be a number between Min_Data = 2 and Max_Data = 7. - * @note the PLLI2SR parameter is only available with STM32F427/437/429/439xx Devices - */ -#define __HAL_RCC_PLLSAI_CONFIG(__PLLSAIN__, __PLLSAIQ__, __PLLSAIR__) \ - (RCC->PLLSAICFGR = (((__PLLSAIN__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIN)) | \ - ((__PLLSAIQ__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIQ)) | \ - ((__PLLSAIR__) << POSITION_VAL(RCC_PLLSAICFGR_PLLSAIR)))) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */ -/*----------------------------------------------------------------------------------------------------------------------*/ - -/*----------------------------------------- PLLSAI/PLLI2S Dividers Configuration ---------------------------------------*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) -/** @brief Macro to configure the SAI clock Divider coming from PLLI2S. - * @note This function must be called before enabling the PLLI2S. - * @param __PLLI2SDivQ__: specifies the PLLI2S division factor for SAI1 clock . - * This parameter must be a number between 1 and 32. - * SAI1 clock frequency = f(PLLI2SQ) / __PLLI2SDivQ__ - */ -#define __HAL_RCC_PLLI2S_PLLSAICLKDIVQ_CONFIG(__PLLI2SDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLI2SDIVQ, (__PLLI2SDivQ__)-1)) - -/** @brief Macro to configure the SAI clock Divider coming from PLLSAI. - * @note This function must be called before enabling the PLLSAI. - * @param __PLLSAIDivQ__: specifies the PLLSAI division factor for SAI1 clock . - * This parameter must be a number between Min_Data = 1 and Max_Data = 32. - * SAI1 clock frequency = f(PLLSAIQ) / __PLLSAIDivQ__ - */ -#define __HAL_RCC_PLLSAI_PLLSAICLKDIVQ_CONFIG(__PLLSAIDivQ__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVQ, ((__PLLSAIDivQ__)-1)<<8)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -/** @brief Macro to configure the LTDC clock Divider coming from PLLSAI. - * - * @note The LTDC peripheral is only available with STM32F427/437/429/439xx Devices. - * @note This function must be called before enabling the PLLSAI. - * @param __PLLSAIDivR__: specifies the PLLSAI division factor for LTDC clock . - * This parameter must be a number between Min_Data = 2 and Max_Data = 16. - * LTDC clock frequency = f(PLLSAIR) / __PLLSAIDivR__ - */ -#define __HAL_RCC_PLLSAI_PLLSAICLKDIVR_CONFIG(__PLLSAIDivR__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_PLLSAIDIVR, (__PLLSAIDivR__))) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ -/*-----------------------------------------------------------------------------------------------------------------------------------*/ - -/*-------------------------------------------------- Peripheral Clock selection -----------------------------------------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -/** @brief Macro to configure the I2S clock source (I2SCLK). - * @note This function must be called before enabling the I2S APB clock. - * @param __SOURCE__: specifies the I2S clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SCLKSOURCE_PLLI2S: PLLI2S clock used as I2S clock source. - * @arg RCC_I2SCLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin - * used as I2S clock source. - */ -#define __HAL_RCC_I2S_CONFIG(__SOURCE__) (*(__IO uint32_t *) RCC_CFGR_I2SSRC_BB = (__SOURCE__)) -#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) - -/** @brief Macro to configure SAI1BlockA clock source selection. - * @note The SAI peripheral is only available with STM32F427/437/429/439xx Devices. - * @note This function must be called before enabling PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__: specifies the SAI Block A clock source. - * This parameter can be one of the following values: - * @arg RCC_SAIACLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used - * as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used - * as SAI1 Block A clock. - * @arg RCC_SAIACLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin - * used as SAI1 Block A clock. - */ -#define __HAL_RCC_SAI_BLOCKACLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1ASRC, (__SOURCE__))) - -/** @brief Macro to configure SAI1BlockB clock source selection. - * @note The SAI peripheral is only available with STM32F427/437/429/439xx Devices. - * @note This function must be called before enabling PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__: specifies the SAI Block B clock source. - * This parameter can be one of the following values: - * @arg RCC_SAIBCLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used - * as SAI1 Block B clock. - * @arg RCC_SAIBCLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used - * as SAI1 Block B clock. - * @arg RCC_SAIBCLKSOURCE_Ext: External clock mapped on the I2S_CKIN pin - * used as SAI1 Block B clock. - */ -#define __HAL_RCC_SAI_BLOCKBCLKSOURCE_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1BSRC, (__SOURCE__))) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -#if defined(STM32F446xx) -/** @brief Macro to configure SAI1 clock source selection. - * @note This configuration is only available with STM32F446xx Devices. - * @note This function must be called before enabling PLL, PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__: specifies the SAI1 clock source. - * This parameter can be one of the following values: - * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock. - */ -#define __HAL_RCC_SAI1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI1SRC, (__SOURCE__))) - -/** @brief Macro to Get SAI1 clock source selection. - * @note This configuration is only available with STM32F446xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_SAI1CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock. - * @arg RCC_SAI1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock. - */ -#define __HAL_RCC_GET_SAI1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI1SRC)) - -/** @brief Macro to configure SAI2 clock source selection. - * @note This configuration is only available with STM32F446xx Devices. - * @note This function must be called before enabling PLL, PLLSAI, PLLI2S and - * the SAI clock. - * @param __SOURCE__: specifies the SAI2 clock source. - * This parameter can be one of the following values: - * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock used as SAI2 clock. - */ -#define __HAL_RCC_SAI2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_SAI2SRC, (__SOURCE__))) - -/** @brief Macro to Get SAI2 clock source selection. - * @note This configuration is only available with STM32F446xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_SAI2CLKSOURCE_PLLI2S: PLLI2S_Q clock divided by PLLI2SDIVQ used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLSAI: PLLISAI_Q clock divided by PLLSAIDIVQ used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI2 clock. - * @arg RCC_SAI2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL Source clock used as SAI2 clock. - */ -#define __HAL_RCC_GET_SAI2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_SAI2SRC)) - -/** @brief Macro to configure I2S APB1 clock source selection. - * @note This configuration is only available with STM32F446xx Devices. - * @note This function must be called before enabling PLL, PLLI2S and the I2S clock. - * @param __SOURCE__: specifies the I2S APB1 clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. - * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock. - * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock. - * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_I2S_APB1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC, (__SOURCE__))) - -/** @brief Macro to Get I2S APB1 clock source selection. - * @note This configuration is only available with STM32F446xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_I2SAPB1CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. - * @arg RCC_I2SAPB1CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock. - * @arg RCC_I2SAPB1CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock. - * @arg RCC_I2SAPB1CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_GET_I2S_APB1_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S1SRC)) - -/** @brief Macro to configure I2S APB2 clock source selection. - * @note This configuration is only available with STM32F446xx Devices. - * @note This function must be called before enabling PLL, PLLI2S and the I2S clock. - * @param __SOURCE__: specifies the SAI Block A clock source. - * This parameter can be one of the following values: - * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. - * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock. - * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock. - * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_I2S_APB2_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC, (__SOURCE__))) - -/** @brief Macro to Get I2S APB2 clock source selection. - * @note This configuration is only available with STM32F446xx Devices. - * @retval The clock source can be one of the following values: - * @arg RCC_I2SAPB2CLKSOURCE_PLLI2S: PLLI2S VCO output clock divided by PLLI2SR used as I2S clock. - * @arg RCC_I2SAPB2CLKSOURCE_EXT: External clock mapped on the I2S_CKIN pin used as SAI1 clock. - * @arg RCC_I2SAPB2CLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SAI1 clock. - * @arg RCC_I2SAPB2CLKSOURCE_PLLSRC: HSI or HSE depending from PLL source Clock. - */ -#define __HAL_RCC_GET_I2S_APB2_SOURCE() (READ_BIT(RCC->DCKCFGR, RCC_DCKCFGR_I2S2SRC)) - -/** @brief Macro to configure the CEC clock. - * @param __SOURCE__: specifies the CEC clock source. - * This parameter can be one of the following values: - * @arg RCC_CECCLKSOURCE_HSI: HSI selected as CEC clock - * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock - */ -#define __HAL_RCC_CEC_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the CEC clock. - * @retval The clock source can be one of the following values: - * @arg RCC_CECCLKSOURCE_HSI488: HSI selected as CEC clock - * @arg RCC_CECCLKSOURCE_LSE: LSE selected as CEC clock - */ -#define __HAL_RCC_GET_CEC_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CECSEL)) - -/** @brief Macro to configure the FMPI2C1 clock. - * @param __SOURCE__: specifies the FMPI2C1 clock source. - * This parameter can be one of the following values: - * @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as CEC clock - * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as CEC clock - * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as CEC clock - */ -#define __HAL_RCC_FMPI2C1_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the FMPI2C1 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_FMPI2C1CLKSOURCE_APB: APB selected as CEC clock - * @arg RCC_FMPI2C1CLKSOURCE_SYSCLK: SYS clock selected as CEC clock - * @arg RCC_FMPI2C1CLKSOURCE_HSI: HSI selected as CEC clock - */ -#define __HAL_RCC_GET_FMPI2C1_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_FMPI2C1SEL)) - -/** @brief Macro to configure the CLK48 clock. - * @param __SOURCE__: specifies the CK48 clock source. - * This parameter can be one of the following values: - * @arg RCC_CK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CK48 clock. - * @arg RCC_CK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CK48 clock. - */ -#define __HAL_RCC_CLK48_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the CLK48 clock. - * @retval The clock source can be one of the following values: - * @arg RCC_CK48CLKSOURCE_PLLQ: PLL VCO Output divided by PLLQ used as CK48 clock. - * @arg RCC_CK48CLKSOURCE_PLLSAIP: PLLSAI VCO Output divided by PLLSAIP used as CK48 clock. - */ -#define __HAL_RCC_GET_CLK48_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_CK48MSEL)) - -/** @brief Macro to configure the SDIO clock. - * @param __SOURCE__: specifies the SDIO clock source. - * This parameter can be one of the following values: - * @arg RCC_SDIOCLKSOURCE_CK48: CK48 output used as SDIO clock. - * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. - */ -#define __HAL_RCC_SDIO_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the SDIO clock. - * @retval The clock source can be one of the following values: - * @arg RCC_SDIOCLKSOURCE_CK48: CK48 output used as SDIO clock. - * @arg RCC_SDIOCLKSOURCE_SYSCLK: System clock output used as SDIO clock. - */ -#define __HAL_RCC_GET_SDIO_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SDIOSEL)) - -/** @brief Macro to configure the SPDIFRX clock. - * @param __SOURCE__: specifies the SPDIFRX clock source. - * This parameter can be one of the following values: - * @arg RCC_SPDIFRXCLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SPDIFRX clock. - * @arg RCC_SPDIFRXCLKSOURCE_PLLI2SP: PLLI2S VCO Output divided by PLLI2SP used as SPDIFRX clock. - */ -#define __HAL_RCC_SPDIFRX_CONFIG(__SOURCE__) (MODIFY_REG(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL, (uint32_t)(__SOURCE__))) - -/** @brief Macro to Get the SPDIFRX clock. - * @retval The clock source can be one of the following values: - * @arg RCC_SPDIFRXCLKSOURCE_PLLR: PLL VCO Output divided by PLLR used as SPDIFRX clock. - * @arg RCC_SPDIFRXCLKSOURCE_PLLI2SP: PLLI2S VCO Output divided by PLLI2SP used as SPDIFRX clock. - */ -#define __HAL_RCC_GET_SPDIFRX_SOURCE() (READ_BIT(RCC->DCKCFGR2, RCC_DCKCFGR2_SPDIFRXSEL)) -#endif /* STM32F446xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) || defined(STM32F446xx) - -/** @brief Macro to configure the Timers clocks prescalers - * @note This feature is only available with STM32F429x/439x Devices. - * @param __PRESC__ : specifies the Timers clocks prescalers selection - * This parameter can be one of the following values: - * @arg RCC_TIMPRES_DESACTIVATED: The Timers kernels clocks prescaler is - * equal to HPRE if PPREx is corresponding to division by 1 or 2, - * else it is equal to [(HPRE * PPREx) / 2] if PPREx is corresponding to - * division by 4 or more. - * @arg RCC_TIMPRES_ACTIVATED: The Timers kernels clocks prescaler is - * equal to HPRE if PPREx is corresponding to division by 1, 2 or 4, - * else it is equal to [(HPRE * PPREx) / 4] if PPREx is corresponding - * to division by 8 or more. - */ -#define __HAL_RCC_TIMCLKPRESCALER(__PRESC__) (*(__IO uint32_t *) RCC_DCKCFGR_TIMPRE_BB = (__PRESC__)) - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx) || STM32F401xC || STM32F401xE || STM32F411xE || STM32F446xx */ - -/*-------------------------------------------------------------------------------------------------------------------*/ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) -/** @brief Enable PLLSAI_RDY interrupt. - */ -#define __HAL_RCC_PLLSAI_ENABLE_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYIE)) - -/** @brief Disable PLLSAI_RDY interrupt. - */ -#define __HAL_RCC_PLLSAI_DISABLE_IT() (RCC->CIR &= ~(RCC_CIR_PLLSAIRDYIE)) - -/** @brief Clear the PLLSAI RDY interrupt pending bits. - */ -#define __HAL_RCC_PLLSAI_CLEAR_IT() (RCC->CIR |= (RCC_CIR_PLLSAIRDYF)) - -/** @brief Check the PLLSAI RDY interrupt has occurred or not. - * @retval The new state (TRUE or FALSE). - */ -#define __HAL_RCC_PLLSAI_GET_IT() ((RCC->CIR & (RCC_CIR_PLLSAIRDYIE)) == (RCC_CIR_PLLSAIRDYIE)) - -/** @brief Check PLLSAI RDY flag is set or not. - * @retval The new state (TRUE or FALSE). - */ -#define __HAL_RCC_PLLSAI_GET_FLAG() ((RCC->CR & (RCC_CR_PLLSAIRDY)) == (RCC_CR_PLLSAIRDY)) - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup RCCEx_Exported_Functions - * @{ - */ - -/** @addtogroup RCCEx_Exported_Functions_Group1 - * @{ - */ -HAL_StatusTypeDef HAL_RCCEx_PeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); -void HAL_RCCEx_GetPeriphCLKConfig(RCC_PeriphCLKInitTypeDef *PeriphClkInit); - -#if defined(STM32F446xx) -uint32_t HAL_RCCEx_GetPeriphCLKFreq(uint32_t PeriphClk); -#endif /* STM32F446xx */ - -#if defined(STM32F411xE) || defined(STM32F446xx) -void HAL_RCCEx_SelectLSEMode(uint8_t Mode); -#endif /* STM32F411xE || STM32F446xx */ -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup RCCEx_Private_Constants RCCEx Private Constants - * @{ - */ - -/** @defgroup RCCEx_BitAddress_AliasRegion RCC BitAddress AliasRegion - * @brief RCC registers bit address in the alias region - * @{ - */ -/* --- CR Register ---*/ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) -/* Alias word address of PLLSAION bit */ -#define RCC_PLLSAION_BIT_NUMBER 0x1C -#define RCC_CR_PLLSAION_BB (PERIPH_BB_BASE + (RCC_CR_OFFSET * 32) + (RCC_PLLSAION_BIT_NUMBER * 4)) - -/* --- DCKCFGR Register ---*/ -/* Alias word address of TIMPRE bit */ -#define RCC_DCKCFGR_OFFSET (RCC_OFFSET + 0x8C) -#define RCC_TIMPRE_BIT_NUMBER 0x18 -#define RCC_DCKCFGR_TIMPRE_BB (PERIPH_BB_BASE + (RCC_DCKCFGR_OFFSET * 32) + (RCC_TIMPRE_BIT_NUMBER * 4)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */ - -#define PLL_TIMEOUT_VALUE ((uint32_t)100) /* 100 ms */ - -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup RCCEx_Private_Macros RCCEx Private Macros - * @{ - */ -/** @defgroup RCCEx_IS_RCC_Definitions RCC Private macros to check input parameters - * @{ - */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x0000002F)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) ||\ - defined(STM32F401xC) || defined(STM32F401xE) || defined(STM32F411xE) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x00000003)) -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F401xC || STM32F401xE || STM32F411xE */ - -#if defined(STM32F446xx) -#define IS_RCC_PERIPHCLOCK(SELECTION) ((1 <= (SELECTION)) && ((SELECTION) <= 0x000007FF)) -#endif /* STM32F446xx */ - -#define IS_RCC_PLLI2SN_VALUE(VALUE) ((192 <= (VALUE)) && ((VALUE) <= 432)) -#define IS_RCC_PLLI2SR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7)) - - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F446xx) -#define IS_RCC_PLLI2SQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15)) - -#define IS_RCC_PLLSAIN_VALUE(VALUE) ((49 <= (VALUE)) && ((VALUE) <= 432)) - -#define IS_RCC_PLLSAIQ_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 15)) - -#define IS_RCC_PLLSAIR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7)) - -#define IS_RCC_PLLSAI_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32)) - -#define IS_RCC_PLLI2S_DIVQ_VALUE(VALUE) ((1 <= (VALUE)) && ((VALUE) <= 32)) - -#define IS_RCC_PLLSAI_DIVR_VALUE(VALUE) (((VALUE) == RCC_PLLSAIDIVR_2) ||\ - ((VALUE) == RCC_PLLSAIDIVR_4) ||\ - ((VALUE) == RCC_PLLSAIDIVR_8) ||\ - ((VALUE) == RCC_PLLSAIDIVR_16)) -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -#if defined(STM32F446xx) || defined(STM32F411xE) -#define IS_RCC_PLLI2SM_VALUE(VALUE) ((VALUE) <= 63) - -#define IS_RCC_LSE_MODE(MODE) (((MODE) == RCC_LSE_LOWPOWER_MODE) ||\ - ((MODE) == RCC_LSE_HIGHDRIVE_MODE)) -#endif /* STM32F446xx || STM32F411xE */ - -#if defined(STM32F446xx) -#define IS_RCC_PLLR_VALUE(VALUE) ((2 <= (VALUE)) && ((VALUE) <= 7)) - -#define IS_RCC_PLLI2SP_VALUE(VALUE) (((VALUE) == RCC_PLLI2SP_DIV2) ||\ - ((VALUE) == RCC_PLLI2SP_DIV4) ||\ - ((VALUE) == RCC_PLLI2SP_DIV6) ||\ - ((VALUE) == RCC_PLLI2SP_DIV8)) - -#define IS_RCC_PLLSAIM_VALUE(VALUE) ((VALUE) <= 63) - -#define IS_RCC_PLLSAIP_VALUE(VALUE) (((VALUE) == RCC_PLLSAIP_DIV2) ||\ - ((VALUE) == RCC_PLLSAIP_DIV4) ||\ - ((VALUE) == RCC_PLLSAIP_DIV6) ||\ - ((VALUE) == RCC_PLLSAIP_DIV8)) - -#define IS_RCC_SAI1CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI1CLKSOURCE_PLLSAI) ||\ - ((SOURCE) == RCC_SAI1CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_SAI1CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_SAI1CLKSOURCE_EXT)) - -#define IS_RCC_SAI2CLKSOURCE(SOURCE) (((SOURCE) == RCC_SAI2CLKSOURCE_PLLSAI) ||\ - ((SOURCE) == RCC_SAI2CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_SAI2CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_SAI2CLKSOURCE_PLLSRC)) - -#define IS_RCC_I2SAPB1CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_I2SAPB1CLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_I2SAPB1CLKSOURCE_PLLSRC)) - - #define IS_RCC_I2SAPB2CLKSOURCE(SOURCE) (((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == RCC_I2SAPB2CLKSOURCE_EXT) ||\ - ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_I2SAPB2CLKSOURCE_PLLSRC)) - -#define IS_RCC_FMPI2C1CLKSOURCE(SOURCE) (((SOURCE) == RCC_FMPI2C1CLKSOURCE_APB) ||\ - ((SOURCE) == RCC_FMPI2C1CLKSOURCE_SYSCLK) ||\ - ((SOURCE) == RCC_FMPI2C1CLKSOURCE_HSI)) - -#define IS_RCC_CECCLKSOURCE(SOURCE) (((SOURCE) == RCC_CECCLKSOURCE_HSI) ||\ - ((SOURCE) == RCC_CECCLKSOURCE_LSE)) - -#define IS_RCC_CK48CLKSOURCE(SOURCE) (((SOURCE) == RCC_CK48CLKSOURCE_PLLQ) ||\ - ((SOURCE) == RCC_CK48CLKSOURCE_PLLSAIP)) - -#define IS_RCC_SDIOCLKSOURCE(SOURCE) (((SOURCE) == RCC_SDIOCLKSOURCE_CK48) ||\ - ((SOURCE) == RCC_SDIOCLKSOURCE_SYSCLK)) - -#define IS_RCC_SPDIFRXCLKSOURCE(SOURCE) (((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLLR) ||\ - ((SOURCE) == RCC_SPDIFRXCLKSOURCE_PLLI2SP)) -#endif /* STM32F446xx */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_RCC_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rng.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rng.h deleted file mode 100644 index ecce334..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rng.h +++ /dev/null @@ -1,364 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rng.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of RNG HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_RNG_H -#define __STM32F4xx_HAL_RNG_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup RNG RNG - * @brief RNG HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** @defgroup RNG_Exported_Types RNG Exported Types - * @{ - */ - -/** @defgroup RNG_Exported_Types_Group1 RNG State Structure definition - * @{ - */ -typedef enum -{ - HAL_RNG_STATE_RESET = 0x00, /*!< RNG not yet initialized or disabled */ - HAL_RNG_STATE_READY = 0x01, /*!< RNG initialized and ready for use */ - HAL_RNG_STATE_BUSY = 0x02, /*!< RNG internal process is ongoing */ - HAL_RNG_STATE_TIMEOUT = 0x03, /*!< RNG timeout state */ - HAL_RNG_STATE_ERROR = 0x04 /*!< RNG error state */ - -}HAL_RNG_StateTypeDef; - -/** - * @} - */ - -/** @defgroup RNG_Exported_Types_Group2 RNG Handle Structure definition - * @{ - */ -typedef struct -{ - RNG_TypeDef *Instance; /*!< Register base address */ - - HAL_LockTypeDef Lock; /*!< RNG locking object */ - - __IO HAL_RNG_StateTypeDef State; /*!< RNG communication state */ - - uint32_t RandomNumber; /*!< Last Generated RNG Data */ - -}RNG_HandleTypeDef; - -/** - * @} - */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup RNG_Exported_Constants RNG Exported Constants - * @{ - */ - -/** @defgroup RNG_Exported_Constants_Group1 RNG Interrupt definition - * @{ - */ -#define RNG_IT_DRDY RNG_SR_DRDY /*!< Data Ready interrupt */ -#define RNG_IT_CEI RNG_SR_CEIS /*!< Clock error interrupt */ -#define RNG_IT_SEI RNG_SR_SEIS /*!< Seed error interrupt */ -/** - * @} - */ - -/** @defgroup RNG_Exported_Constants_Group2 RNG Flag definition - * @{ - */ -#define RNG_FLAG_DRDY RNG_SR_DRDY /*!< Data ready */ -#define RNG_FLAG_CECS RNG_SR_CECS /*!< Clock error current status */ -#define RNG_FLAG_SECS RNG_SR_SECS /*!< Seed error current status */ - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ - -/** @defgroup RNG_Exported_Macros RNG Exported Macros - * @{ - */ - -/** @brief Reset RNG handle state - * @param __HANDLE__: RNG Handle - * @retval None - */ -#define __HAL_RNG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RNG_STATE_RESET) - -/** - * @brief Enables the RNG peripheral. - * @param __HANDLE__: RNG Handle - * @retval None - */ -#define __HAL_RNG_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_RNGEN) - -/** - * @brief Disables the RNG peripheral. - * @param __HANDLE__: RNG Handle - * @retval None - */ -#define __HAL_RNG_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_RNGEN) - -/** - * @brief Check the selected RNG flag status. - * @param __HANDLE__: RNG Handle - * @param __FLAG__: RNG flag - * This parameter can be one of the following values: - * @arg RNG_FLAG_DRDY: Data ready - * @arg RNG_FLAG_CECS: Clock error current status - * @arg RNG_FLAG_SECS: Seed error current status - * @retval The new state of __FLAG__ (SET or RESET). - */ -#define __HAL_RNG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) - -/** - * @brief Clears the selected RNG flag status. - * @param __HANDLE__: RNG handle - * @param __FLAG__: RNG flag to clear - * @note WARNING: This is a dummy macro for HAL code alignment, - * flags RNG_FLAG_DRDY, RNG_FLAG_CECS and RNG_FLAG_SECS are read-only. - * @retval None - */ -#define __HAL_RNG_CLEAR_FLAG(__HANDLE__, __FLAG__) /* dummy macro */ - - - -/** - * @brief Enables the RNG interrupts. - * @param __HANDLE__: RNG Handle - * @retval None - */ -#define __HAL_RNG_ENABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR |= RNG_CR_IE) - -/** - * @brief Disables the RNG interrupts. - * @param __HANDLE__: RNG Handle - * @retval None - */ -#define __HAL_RNG_DISABLE_IT(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~RNG_CR_IE) - -/** - * @brief Checks whether the specified RNG interrupt has occurred or not. - * @param __HANDLE__: RNG Handle - * @param __INTERRUPT__: specifies the RNG interrupt status flag to check. - * This parameter can be one of the following values: - * @arg RNG_IT_DRDY: Data ready interrupt - * @arg RNG_IT_CEI: Clock error interrupt - * @arg RNG_IT_SEI: Seed error interrupt - * @retval The new state of __INTERRUPT__ (SET or RESET). - */ -#define __HAL_RNG_GET_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR & (__INTERRUPT__)) == (__INTERRUPT__)) - -/** - * @brief Clear the RNG interrupt status flags. - * @param __HANDLE__: RNG Handle - * @param __INTERRUPT__: specifies the RNG interrupt status flag to clear. - * This parameter can be one of the following values: - * @arg RNG_IT_CEI: Clock error interrupt - * @arg RNG_IT_SEI: Seed error interrupt - * @note RNG_IT_DRDY flag is read-only, reading RNG_DR register automatically clears RNG_IT_DRDY. - * @retval None - */ -#define __HAL_RNG_CLEAR_IT(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->SR) = ~(__INTERRUPT__)) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup RNG_Exported_Functions RNG Exported Functions - * @{ - */ - -/** @defgroup RNG_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ -HAL_StatusTypeDef HAL_RNG_Init(RNG_HandleTypeDef *hrng); -HAL_StatusTypeDef HAL_RNG_DeInit (RNG_HandleTypeDef *hrng); -void HAL_RNG_MspInit(RNG_HandleTypeDef *hrng); -void HAL_RNG_MspDeInit(RNG_HandleTypeDef *hrng); - -/** - * @} - */ - -/** @defgroup RNG_Exported_Functions_Group2 Peripheral Control functions - * @{ - */ -uint32_t HAL_RNG_GetRandomNumber(RNG_HandleTypeDef *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber() instead */ -uint32_t HAL_RNG_GetRandomNumber_IT(RNG_HandleTypeDef *hrng); /* Obsolete, use HAL_RNG_GenerateRandomNumber_IT() instead */ - -HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber(RNG_HandleTypeDef *hrng, uint32_t *random32bit); -HAL_StatusTypeDef HAL_RNG_GenerateRandomNumber_IT(RNG_HandleTypeDef *hrng); -uint32_t HAL_RNG_ReadLastRandomNumber(RNG_HandleTypeDef *hrng); - -void HAL_RNG_IRQHandler(RNG_HandleTypeDef *hrng); -void HAL_RNG_ErrorCallback(RNG_HandleTypeDef *hrng); -void HAL_RNG_ReadyDataCallback(RNG_HandleTypeDef* hrng, uint32_t random32bit); - -/** - * @} - */ - -/** @defgroup RNG_Exported_Functions_Group3 Peripheral State functions - * @{ - */ -HAL_RNG_StateTypeDef HAL_RNG_GetState(RNG_HandleTypeDef *hrng); - -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/** @defgroup RNG_Private_Types RNG Private Types - * @{ - */ - -/** - * @} - */ - -/* Private defines -----------------------------------------------------------*/ -/** @defgroup RNG_Private_Defines RNG Private Defines - * @{ - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup RNG_Private_Variables RNG Private Variables - * @{ - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup RNG_Private_Constants RNG Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup RNG_Private_Macros RNG Private Macros - * @{ - */ -#define IS_RNG_IT(IT) (((IT) == RNG_IT_CEI) || \ - ((IT) == RNG_IT_SEI)) - -#define IS_RNG_FLAG(FLAG) (((FLAG) == RNG_FLAG_DRDY) || \ - ((FLAG) == RNG_FLAG_CECS) || \ - ((FLAG) == RNG_FLAG_SECS)) - -/** - * @} - */ - -/* Private functions prototypes ----------------------------------------------*/ -/** @defgroup RNG_Private_Functions_Prototypes RNG Private Functions Prototypes - * @{ - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup RNG_Private_Functions RNG Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_HAL_RNG_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc.h deleted file mode 100644 index 1c39baf..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc.h +++ /dev/null @@ -1,830 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rtc.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of RTC HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_RTC_H -#define __STM32F4xx_HAL_RTC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup RTC - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup RTC_Exported_Types RTC Exported Types - * @{ - */ - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_RTC_STATE_RESET = 0x00, /*!< RTC not yet initialized or disabled */ - HAL_RTC_STATE_READY = 0x01, /*!< RTC initialized and ready for use */ - HAL_RTC_STATE_BUSY = 0x02, /*!< RTC process is ongoing */ - HAL_RTC_STATE_TIMEOUT = 0x03, /*!< RTC timeout state */ - HAL_RTC_STATE_ERROR = 0x04 /*!< RTC error state */ - -}HAL_RTCStateTypeDef; - -/** - * @brief RTC Configuration Structure definition - */ -typedef struct -{ - uint32_t HourFormat; /*!< Specifies the RTC Hour Format. - This parameter can be a value of @ref RTC_Hour_Formats */ - - uint32_t AsynchPrediv; /*!< Specifies the RTC Asynchronous Predivider value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7F */ - - uint32_t SynchPrediv; /*!< Specifies the RTC Synchronous Predivider value. - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x7FFF */ - - uint32_t OutPut; /*!< Specifies which signal will be routed to the RTC output. - This parameter can be a value of @ref RTC_Output_selection_Definitions */ - - uint32_t OutPutPolarity; /*!< Specifies the polarity of the output signal. - This parameter can be a value of @ref RTC_Output_Polarity_Definitions */ - - uint32_t OutPutType; /*!< Specifies the RTC Output Pin mode. - This parameter can be a value of @ref RTC_Output_Type_ALARM_OUT */ -}RTC_InitTypeDef; - -/** - * @brief RTC Time structure definition - */ -typedef struct -{ - uint8_t Hours; /*!< Specifies the RTC Time Hour. - This parameter must be a number between Min_Data = 0 and Max_Data = 12 if the RTC_HourFormat_12 is selected. - This parameter must be a number between Min_Data = 0 and Max_Data = 23 if the RTC_HourFormat_24 is selected */ - - uint8_t Minutes; /*!< Specifies the RTC Time Minutes. - This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ - - uint8_t Seconds; /*!< Specifies the RTC Time Seconds. - This parameter must be a number between Min_Data = 0 and Max_Data = 59 */ - - uint8_t TimeFormat; /*!< Specifies the RTC AM/PM Time. - This parameter can be a value of @ref RTC_AM_PM_Definitions */ - - uint32_t SubSeconds; /*!< Specifies the RTC_SSR RTC Sub Second register content. - This parameter corresponds to a time unit range between [0-1] Second - with [1 Sec / SecondFraction +1] granularity */ - - uint32_t SecondFraction; /*!< Specifies the range or granularity of Sub Second register content - corresponding to Synchronous pre-scaler factor value (PREDIV_S) - This parameter corresponds to a time unit range between [0-1] Second - with [1 Sec / SecondFraction +1] granularity. - This field will be used only by HAL_RTC_GetTime function */ - - uint32_t DayLightSaving; /*!< Specifies DayLight Save Operation. - This parameter can be a value of @ref RTC_DayLightSaving_Definitions */ - - uint32_t StoreOperation; /*!< Specifies RTC_StoreOperation value to be written in the BCK bit - in CR register to store the operation. - This parameter can be a value of @ref RTC_StoreOperation_Definitions */ -}RTC_TimeTypeDef; - -/** - * @brief RTC Date structure definition - */ -typedef struct -{ - uint8_t WeekDay; /*!< Specifies the RTC Date WeekDay. - This parameter can be a value of @ref RTC_WeekDay_Definitions */ - - uint8_t Month; /*!< Specifies the RTC Date Month (in BCD format). - This parameter can be a value of @ref RTC_Month_Date_Definitions */ - - uint8_t Date; /*!< Specifies the RTC Date. - This parameter must be a number between Min_Data = 1 and Max_Data = 31 */ - - uint8_t Year; /*!< Specifies the RTC Date Year. - This parameter must be a number between Min_Data = 0 and Max_Data = 99 */ - -}RTC_DateTypeDef; - -/** - * @brief RTC Alarm structure definition - */ -typedef struct -{ - RTC_TimeTypeDef AlarmTime; /*!< Specifies the RTC Alarm Time members */ - - uint32_t AlarmMask; /*!< Specifies the RTC Alarm Masks. - This parameter can be a value of @ref RTC_AlarmMask_Definitions */ - - uint32_t AlarmSubSecondMask; /*!< Specifies the RTC Alarm SubSeconds Masks. - This parameter can be a value of @ref RTC_Alarm_Sub_Seconds_Masks_Definitions */ - - uint32_t AlarmDateWeekDaySel; /*!< Specifies the RTC Alarm is on Date or WeekDay. - This parameter can be a value of @ref RTC_AlarmDateWeekDay_Definitions */ - - uint8_t AlarmDateWeekDay; /*!< Specifies the RTC Alarm Date/WeekDay. - If the Alarm Date is selected, this parameter must be set to a value in the 1-31 range. - If the Alarm WeekDay is selected, this parameter can be a value of @ref RTC_WeekDay_Definitions */ - - uint32_t Alarm; /*!< Specifies the alarm . - This parameter can be a value of @ref RTC_Alarms_Definitions */ -}RTC_AlarmTypeDef; - -/** - * @brief RTC Handle Structure definition - */ -typedef struct -{ - RTC_TypeDef *Instance; /*!< Register base address */ - - RTC_InitTypeDef Init; /*!< RTC required parameters */ - - HAL_LockTypeDef Lock; /*!< RTC locking object */ - - __IO HAL_RTCStateTypeDef State; /*!< Time communication state */ - -}RTC_HandleTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RTC_Exported_Constants RTC Exported Constants - * @{ - */ - -/** @defgroup RTC_Hour_Formats RTC Hour Formats - * @{ - */ -#define RTC_HOURFORMAT_24 ((uint32_t)0x00000000) -#define RTC_HOURFORMAT_12 ((uint32_t)0x00000040) -/** - * @} - */ - -/** @defgroup RTC_Output_selection_Definitions RTC Output Selection Definitions - * @{ - */ -#define RTC_OUTPUT_DISABLE ((uint32_t)0x00000000) -#define RTC_OUTPUT_ALARMA ((uint32_t)0x00200000) -#define RTC_OUTPUT_ALARMB ((uint32_t)0x00400000) -#define RTC_OUTPUT_WAKEUP ((uint32_t)0x00600000) -/** - * @} - */ - -/** @defgroup RTC_Output_Polarity_Definitions RTC Output Polarity Definitions - * @{ - */ -#define RTC_OUTPUT_POLARITY_HIGH ((uint32_t)0x00000000) -#define RTC_OUTPUT_POLARITY_LOW ((uint32_t)0x00100000) -/** - * @} - */ - -/** @defgroup RTC_Output_Type_ALARM_OUT RTC Output Type ALARM OUT - * @{ - */ -#define RTC_OUTPUT_TYPE_OPENDRAIN ((uint32_t)0x00000000) -#define RTC_OUTPUT_TYPE_PUSHPULL ((uint32_t)0x00040000) -/** - * @} - */ - -/** @defgroup RTC_AM_PM_Definitions RTC AM PM Definitions - * @{ - */ -#define RTC_HOURFORMAT12_AM ((uint8_t)0x00) -#define RTC_HOURFORMAT12_PM ((uint8_t)0x40) -/** - * @} - */ - -/** @defgroup RTC_DayLightSaving_Definitions RTC DayLight Saving Definitions - * @{ - */ -#define RTC_DAYLIGHTSAVING_SUB1H ((uint32_t)0x00020000) -#define RTC_DAYLIGHTSAVING_ADD1H ((uint32_t)0x00010000) -#define RTC_DAYLIGHTSAVING_NONE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup RTC_StoreOperation_Definitions RTC Store Operation Definitions - * @{ - */ -#define RTC_STOREOPERATION_RESET ((uint32_t)0x00000000) -#define RTC_STOREOPERATION_SET ((uint32_t)0x00040000) -/** - * @} - */ - -/** @defgroup RTC_Input_parameter_format_definitions RTC Input Parameter Format Definitions - * @{ - */ -#define RTC_FORMAT_BIN ((uint32_t)0x000000000) -#define RTC_FORMAT_BCD ((uint32_t)0x000000001) -/** - * @} - */ - -/** @defgroup RTC_Month_Date_Definitions RTC Month Date Definitions - * @{ - */ -/* Coded in BCD format */ -#define RTC_MONTH_JANUARY ((uint8_t)0x01) -#define RTC_MONTH_FEBRUARY ((uint8_t)0x02) -#define RTC_MONTH_MARCH ((uint8_t)0x03) -#define RTC_MONTH_APRIL ((uint8_t)0x04) -#define RTC_MONTH_MAY ((uint8_t)0x05) -#define RTC_MONTH_JUNE ((uint8_t)0x06) -#define RTC_MONTH_JULY ((uint8_t)0x07) -#define RTC_MONTH_AUGUST ((uint8_t)0x08) -#define RTC_MONTH_SEPTEMBER ((uint8_t)0x09) -#define RTC_MONTH_OCTOBER ((uint8_t)0x10) -#define RTC_MONTH_NOVEMBER ((uint8_t)0x11) -#define RTC_MONTH_DECEMBER ((uint8_t)0x12) -/** - * @} - */ - -/** @defgroup RTC_WeekDay_Definitions RTC WeekDay Definitions - * @{ - */ -#define RTC_WEEKDAY_MONDAY ((uint8_t)0x01) -#define RTC_WEEKDAY_TUESDAY ((uint8_t)0x02) -#define RTC_WEEKDAY_WEDNESDAY ((uint8_t)0x03) -#define RTC_WEEKDAY_THURSDAY ((uint8_t)0x04) -#define RTC_WEEKDAY_FRIDAY ((uint8_t)0x05) -#define RTC_WEEKDAY_SATURDAY ((uint8_t)0x06) -#define RTC_WEEKDAY_SUNDAY ((uint8_t)0x07) -/** - * @} - */ - -/** @defgroup RTC_AlarmDateWeekDay_Definitions RTC Alarm Date WeekDay Definitions - * @{ - */ -#define RTC_ALARMDATEWEEKDAYSEL_DATE ((uint32_t)0x00000000) -#define RTC_ALARMDATEWEEKDAYSEL_WEEKDAY ((uint32_t)0x40000000) -/** - * @} - */ - -/** @defgroup RTC_AlarmMask_Definitions RTC Alarm Mask Definitions - * @{ - */ -#define RTC_ALARMMASK_NONE ((uint32_t)0x00000000) -#define RTC_ALARMMASK_DATEWEEKDAY RTC_ALRMAR_MSK4 -#define RTC_ALARMMASK_HOURS RTC_ALRMAR_MSK3 -#define RTC_ALARMMASK_MINUTES RTC_ALRMAR_MSK2 -#define RTC_ALARMMASK_SECONDS RTC_ALRMAR_MSK1 -#define RTC_ALARMMASK_ALL ((uint32_t)0x80808080) -/** - * @} - */ - -/** @defgroup RTC_Alarms_Definitions RTC Alarms Definitions - * @{ - */ -#define RTC_ALARM_A RTC_CR_ALRAE -#define RTC_ALARM_B RTC_CR_ALRBE -/** - * @} - */ - -/** @defgroup RTC_Alarm_Sub_Seconds_Masks_Definitions RTC Alarm Sub Seconds Masks Definitions - * @{ - */ -#define RTC_ALARMSUBSECONDMASK_ALL ((uint32_t)0x00000000) /*!< All Alarm SS fields are masked. - There is no comparison on sub seconds - for Alarm */ -#define RTC_ALARMSUBSECONDMASK_SS14_1 ((uint32_t)0x01000000) /*!< SS[14:1] are don't care in Alarm - comparison. Only SS[0] is compared. */ -#define RTC_ALARMSUBSECONDMASK_SS14_2 ((uint32_t)0x02000000) /*!< SS[14:2] are don't care in Alarm - comparison. Only SS[1:0] are compared */ -#define RTC_ALARMSUBSECONDMASK_SS14_3 ((uint32_t)0x03000000) /*!< SS[14:3] are don't care in Alarm - comparison. Only SS[2:0] are compared */ -#define RTC_ALARMSUBSECONDMASK_SS14_4 ((uint32_t)0x04000000) /*!< SS[14:4] are don't care in Alarm - comparison. Only SS[3:0] are compared */ -#define RTC_ALARMSUBSECONDMASK_SS14_5 ((uint32_t)0x05000000) /*!< SS[14:5] are don't care in Alarm - comparison. Only SS[4:0] are compared */ -#define RTC_ALARMSUBSECONDMASK_SS14_6 ((uint32_t)0x06000000) /*!< SS[14:6] are don't care in Alarm - comparison. Only SS[5:0] are compared */ -#define RTC_ALARMSUBSECONDMASK_SS14_7 ((uint32_t)0x07000000) /*!< SS[14:7] are don't care in Alarm - comparison. Only SS[6:0] are compared */ -#define RTC_ALARMSUBSECONDMASK_SS14_8 ((uint32_t)0x08000000) /*!< SS[14:8] are don't care in Alarm - comparison. Only SS[7:0] are compared */ -#define RTC_ALARMSUBSECONDMASK_SS14_9 ((uint32_t)0x09000000) /*!< SS[14:9] are don't care in Alarm - comparison. Only SS[8:0] are compared */ -#define RTC_ALARMSUBSECONDMASK_SS14_10 ((uint32_t)0x0A000000) /*!< SS[14:10] are don't care in Alarm - comparison. Only SS[9:0] are compared */ -#define RTC_ALARMSUBSECONDMASK_SS14_11 ((uint32_t)0x0B000000) /*!< SS[14:11] are don't care in Alarm - comparison. Only SS[10:0] are compared */ -#define RTC_ALARMSUBSECONDMASK_SS14_12 ((uint32_t)0x0C000000) /*!< SS[14:12] are don't care in Alarm - comparison.Only SS[11:0] are compared */ -#define RTC_ALARMSUBSECONDMASK_SS14_13 ((uint32_t)0x0D000000) /*!< SS[14:13] are don't care in Alarm - comparison. Only SS[12:0] are compared */ -#define RTC_ALARMSUBSECONDMASK_SS14 ((uint32_t)0x0E000000) /*!< SS[14] is don't care in Alarm - comparison.Only SS[13:0] are compared */ -#define RTC_ALARMSUBSECONDMASK_NONE ((uint32_t)0x0F000000) /*!< SS[14:0] are compared and must match - to activate alarm. */ -/** - * @} - */ - -/** @defgroup RTC_Interrupts_Definitions RTC Interrupts Definitions - * @{ - */ -#define RTC_IT_TS ((uint32_t)0x00008000) -#define RTC_IT_WUT ((uint32_t)0x00004000) -#define RTC_IT_ALRB ((uint32_t)0x00002000) -#define RTC_IT_ALRA ((uint32_t)0x00001000) -#define RTC_IT_TAMP ((uint32_t)0x00000004) /* Used only to Enable the Tamper Interrupt */ -#define RTC_IT_TAMP1 ((uint32_t)0x00020000) -#define RTC_IT_TAMP2 ((uint32_t)0x00040000) -/** - * @} - */ - -/** @defgroup RTC_Flags_Definitions RTC Flags Definitions - * @{ - */ -#define RTC_FLAG_RECALPF ((uint32_t)0x00010000) -#define RTC_FLAG_TAMP2F ((uint32_t)0x00004000) -#define RTC_FLAG_TAMP1F ((uint32_t)0x00002000) -#define RTC_FLAG_TSOVF ((uint32_t)0x00001000) -#define RTC_FLAG_TSF ((uint32_t)0x00000800) -#define RTC_FLAG_WUTF ((uint32_t)0x00000400) -#define RTC_FLAG_ALRBF ((uint32_t)0x00000200) -#define RTC_FLAG_ALRAF ((uint32_t)0x00000100) -#define RTC_FLAG_INITF ((uint32_t)0x00000040) -#define RTC_FLAG_RSF ((uint32_t)0x00000020) -#define RTC_FLAG_INITS ((uint32_t)0x00000010) -#define RTC_FLAG_SHPF ((uint32_t)0x00000008) -#define RTC_FLAG_WUTWF ((uint32_t)0x00000004) -#define RTC_FLAG_ALRBWF ((uint32_t)0x00000002) -#define RTC_FLAG_ALRAWF ((uint32_t)0x00000001) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup RTC_Exported_Macros RTC Exported Macros - * @{ - */ - -/** @brief Reset RTC handle state - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_RTC_STATE_RESET) - -/** - * @brief Disable the write protection for RTC registers. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_WRITEPROTECTION_DISABLE(__HANDLE__) \ - do{ \ - (__HANDLE__)->Instance->WPR = 0xCA; \ - (__HANDLE__)->Instance->WPR = 0x53; \ - } while(0) - -/** - * @brief Enable the write protection for RTC registers. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_WRITEPROTECTION_ENABLE(__HANDLE__) \ - do{ \ - (__HANDLE__)->Instance->WPR = 0xFF; \ - } while(0) - -/** - * @brief Enable the RTC ALARMA peripheral. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_ALARMA_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRAE)) - -/** - * @brief Disable the RTC ALARMA peripheral. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_ALARMA_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRAE)) - -/** - * @brief Enable the RTC ALARMB peripheral. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_ALARMB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_ALRBE)) - -/** - * @brief Disable the RTC ALARMB peripheral. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_ALARMB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_ALRBE)) - -/** - * @brief Enable the RTC Alarm interrupt. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg RTC_IT_ALRA: Alarm A interrupt - * @arg RTC_IT_ALRB: Alarm B interrupt - * @retval None - */ -#define __HAL_RTC_ALARM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) - -/** - * @brief Disable the RTC Alarm interrupt. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to be enabled or disabled. - * This parameter can be any combination of the following values: - * @arg RTC_IT_ALRA: Alarm A interrupt - * @arg RTC_IT_ALRB: Alarm B interrupt - * @retval None - */ -#define __HAL_RTC_ALARM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) - -/** - * @brief Check whether the specified RTC Alarm interrupt has occurred or not. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC Alarm interrupt to check. - * This parameter can be: - * @arg RTC_IT_ALRA: Alarm A interrupt - * @arg RTC_IT_ALRB: Alarm B interrupt - * @retval None - */ -#define __HAL_RTC_ALARM_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR)& ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET) - -/** - * @brief Get the selected RTC Alarm's flag status. - * @param __HANDLE__: specifies the RTC handle. - * @param __FLAG__: specifies the RTC Alarm Flag to check. - * This parameter can be: - * @arg RTC_FLAG_ALRAF - * @arg RTC_FLAG_ALRBF - * @arg RTC_FLAG_ALRAWF - * @arg RTC_FLAG_ALRBWF - * @retval None - */ -#define __HAL_RTC_ALARM_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET) - -/** - * @brief Clear the RTC Alarm's pending flags. - * @param __HANDLE__: specifies the RTC handle. - * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled. - * This parameter can be: - * @arg RTC_FLAG_ALRAF - * @arg RTC_FLAG_ALRBF - * @retval None - */ -#define __HAL_RTC_ALARM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) - - -/** - * @brief Check whether the specified RTC Alarm interrupt has been enabled or not. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC Alarm interrupt sources to check. - * This parameter can be: - * @arg RTC_IT_ALRA: Alarm A interrupt - * @arg RTC_IT_ALRB: Alarm B interrupt - * @retval None - */ -#define __HAL_RTC_ALARM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET) - -/** - * @brief Enable interrupt on the RTC Alarm associated Exti line. - * @retval None - */ -#define __HAL_RTC_ALARM_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_ALARM_EVENT) - -/** - * @brief Disable interrupt on the RTC Alarm associated Exti line. - * @retval None - */ -#define __HAL_RTC_ALARM_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_ALARM_EVENT)) - -/** - * @brief Enable event on the RTC Alarm associated Exti line. - * @retval None. - */ -#define __HAL_RTC_ALARM_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_ALARM_EVENT) - -/** - * @brief Disable event on the RTC Alarm associated Exti line. - * @retval None. - */ -#define __HAL_RTC_ALARM_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_ALARM_EVENT)) - -/** - * @brief Enable falling edge trigger on the RTC Alarm associated Exti line. - * @retval None. - */ -#define __HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_ALARM_EVENT) - -/** - * @brief Disable falling edge trigger on the RTC Alarm associated Exti line. - * @retval None. - */ -#define __HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_ALARM_EVENT)) - -/** - * @brief Enable rising edge trigger on the RTC Alarm associated Exti line. - * @retval None. - */ -#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_ALARM_EVENT) - -/** - * @brief Disable rising edge trigger on the RTC Alarm associated Exti line. - * @retval None. - */ -#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_ALARM_EVENT)) - -/** - * @brief Enable rising & falling edge trigger on the RTC Alarm associated Exti line. - * @retval None. - */ -#define __HAL_RTC_ALARM_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_ALARM_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_ALARM_EXTI_ENABLE_FALLING_EDGE(); - -/** - * @brief Disable rising & falling edge trigger on the RTC Alarm associated Exti line. - * @retval None. - */ -#define __HAL_RTC_ALARM_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_ALARM_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_ALARM_EXTI_DISABLE_FALLING_EDGE(); - -/** - * @brief Check whether the RTC Alarm associated Exti line interrupt flag is set or not. - * @retval Line Status. - */ -#define __HAL_RTC_ALARM_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_ALARM_EVENT) - -/** - * @brief Clear the RTC Alarm associated Exti line flag. - * @retval None. - */ -#define __HAL_RTC_ALARM_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_ALARM_EVENT) - -/** - * @brief Generate a Software interrupt on RTC Alarm associated Exti line. - * @retval None. - */ -#define __HAL_RTC_ALARM_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_ALARM_EVENT) -/** - * @} - */ - -/* Include RTC HAL Extension module */ -#include "stm32f4xx_hal_rtc_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup RTC_Exported_Functions - * @{ - */ - -/** @addtogroup RTC_Exported_Functions_Group1 - * @{ - */ -/* Initialization and de-initialization functions ****************************/ -HAL_StatusTypeDef HAL_RTC_Init(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc); -void HAL_RTC_MspInit(RTC_HandleTypeDef *hrtc); -void HAL_RTC_MspDeInit(RTC_HandleTypeDef *hrtc); -/** - * @} - */ - -/** @addtogroup RTC_Exported_Functions_Group2 - * @{ - */ -/* RTC Time and Date functions ************************************************/ -HAL_StatusTypeDef HAL_RTC_SetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); -HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format); -HAL_StatusTypeDef HAL_RTC_SetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); -HAL_StatusTypeDef HAL_RTC_GetDate(RTC_HandleTypeDef *hrtc, RTC_DateTypeDef *sDate, uint32_t Format); -/** - * @} - */ - -/** @addtogroup RTC_Exported_Functions_Group3 - * @{ - */ -/* RTC Alarm functions ********************************************************/ -HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); -HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format); -HAL_StatusTypeDef HAL_RTC_DeactivateAlarm(RTC_HandleTypeDef *hrtc, uint32_t Alarm); -HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format); -void HAL_RTC_AlarmIRQHandler(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTC_PollForAlarmAEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); -void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc); -/** - * @} - */ - -/** @addtogroup RTC_Exported_Functions_Group4 - * @{ - */ -/* Peripheral Control functions ***********************************************/ -HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc); -/** - * @} - */ - -/** @addtogroup RTC_Exported_Functions_Group5 - * @{ - */ -/* Peripheral State functions *************************************************/ -HAL_RTCStateTypeDef HAL_RTC_GetState(RTC_HandleTypeDef *hrtc); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup RTC_Private_Constants RTC Private Constants - * @{ - */ -/* Masks Definition */ -#define RTC_TR_RESERVED_MASK ((uint32_t)0x007F7F7F) -#define RTC_DR_RESERVED_MASK ((uint32_t)0x00FFFF3F) -#define RTC_INIT_MASK ((uint32_t)0xFFFFFFFF) -#define RTC_RSF_MASK ((uint32_t)0xFFFFFF5F) -#define RTC_FLAGS_MASK ((uint32_t)(RTC_FLAG_TSOVF | RTC_FLAG_TSF | RTC_FLAG_WUTF | \ - RTC_FLAG_ALRBF | RTC_FLAG_ALRAF | RTC_FLAG_INITF | \ - RTC_FLAG_RSF | RTC_FLAG_INITS | RTC_FLAG_WUTWF | \ - RTC_FLAG_ALRBWF | RTC_FLAG_ALRAWF | RTC_FLAG_TAMP1F | \ - RTC_FLAG_RECALPF | RTC_FLAG_SHPF)) - -#define RTC_TIMEOUT_VALUE 1000 - -#define RTC_EXTI_LINE_ALARM_EVENT ((uint32_t)EXTI_IMR_MR17) /*!< External interrupt line 17 Connected to the RTC Alarm event */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup RTC_Private_Macros RTC Private Macros - * @{ - */ - -/** @defgroup RTC_IS_RTC_Definitions RTC Private macros to check input parameters - * @{ - */ -#define IS_RTC_HOUR_FORMAT(FORMAT) (((FORMAT) == RTC_HOURFORMAT_12) || \ - ((FORMAT) == RTC_HOURFORMAT_24)) -#define IS_RTC_OUTPUT(OUTPUT) (((OUTPUT) == RTC_OUTPUT_DISABLE) || \ - ((OUTPUT) == RTC_OUTPUT_ALARMA) || \ - ((OUTPUT) == RTC_OUTPUT_ALARMB) || \ - ((OUTPUT) == RTC_OUTPUT_WAKEUP)) -#define IS_RTC_OUTPUT_POL(POL) (((POL) == RTC_OUTPUT_POLARITY_HIGH) || \ - ((POL) == RTC_OUTPUT_POLARITY_LOW)) -#define IS_RTC_OUTPUT_TYPE(TYPE) (((TYPE) == RTC_OUTPUT_TYPE_OPENDRAIN) || \ - ((TYPE) == RTC_OUTPUT_TYPE_PUSHPULL)) -#define IS_RTC_HOUR12(HOUR) (((HOUR) > (uint32_t)0) && ((HOUR) <= (uint32_t)12)) -#define IS_RTC_HOUR24(HOUR) ((HOUR) <= (uint32_t)23) -#define IS_RTC_ASYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7F) -#define IS_RTC_SYNCH_PREDIV(PREDIV) ((PREDIV) <= (uint32_t)0x7FFF) -#define IS_RTC_MINUTES(MINUTES) ((MINUTES) <= (uint32_t)59) -#define IS_RTC_SECONDS(SECONDS) ((SECONDS) <= (uint32_t)59) - -#define IS_RTC_HOURFORMAT12(PM) (((PM) == RTC_HOURFORMAT12_AM) || ((PM) == RTC_HOURFORMAT12_PM)) -#define IS_RTC_DAYLIGHT_SAVING(SAVE) (((SAVE) == RTC_DAYLIGHTSAVING_SUB1H) || \ - ((SAVE) == RTC_DAYLIGHTSAVING_ADD1H) || \ - ((SAVE) == RTC_DAYLIGHTSAVING_NONE)) -#define IS_RTC_STORE_OPERATION(OPERATION) (((OPERATION) == RTC_STOREOPERATION_RESET) || \ - ((OPERATION) == RTC_STOREOPERATION_SET)) -#define IS_RTC_FORMAT(FORMAT) (((FORMAT) == RTC_FORMAT_BIN) || ((FORMAT) == RTC_FORMAT_BCD)) -#define IS_RTC_YEAR(YEAR) ((YEAR) <= (uint32_t)99) -#define IS_RTC_MONTH(MONTH) (((MONTH) >= (uint32_t)1) && ((MONTH) <= (uint32_t)12)) -#define IS_RTC_DATE(DATE) (((DATE) >= (uint32_t)1) && ((DATE) <= (uint32_t)31)) -#define IS_RTC_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_SUNDAY)) -#define IS_RTC_ALARM_DATE_WEEKDAY_DATE(DATE) (((DATE) >(uint32_t) 0) && ((DATE) <= (uint32_t)31)) -#define IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(WEEKDAY) (((WEEKDAY) == RTC_WEEKDAY_MONDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_TUESDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_WEDNESDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_THURSDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_FRIDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_SATURDAY) || \ - ((WEEKDAY) == RTC_WEEKDAY_SUNDAY)) -#define IS_RTC_ALARM_DATE_WEEKDAY_SEL(SEL) (((SEL) == RTC_ALARMDATEWEEKDAYSEL_DATE) || \ - ((SEL) == RTC_ALARMDATEWEEKDAYSEL_WEEKDAY)) -#define IS_RTC_ALARM_MASK(MASK) (((MASK) & 0x7F7F7F7F) == (uint32_t)RESET) -#define IS_RTC_ALARM(ALARM) (((ALARM) == RTC_ALARM_A) || ((ALARM) == RTC_ALARM_B)) -#define IS_RTC_ALARM_SUB_SECOND_VALUE(VALUE) ((VALUE) <= (uint32_t)0x00007FFF) - -#define IS_RTC_ALARM_SUB_SECOND_MASK(MASK) (((MASK) == RTC_ALARMSUBSECONDMASK_ALL) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_1) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_2) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_3) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_4) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_5) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_6) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_7) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_8) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_9) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_10) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_11) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_12) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14_13) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_SS14) || \ - ((MASK) == RTC_ALARMSUBSECONDMASK_NONE)) -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup RTC_Private_Functions RTC Private Functions - * @{ - */ -HAL_StatusTypeDef RTC_EnterInitMode(RTC_HandleTypeDef* hrtc); -uint8_t RTC_ByteToBcd2(uint8_t Value); -uint8_t RTC_Bcd2ToByte(uint8_t Value); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_RTC_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc_ex.h deleted file mode 100644 index 1dac76f..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_rtc_ex.h +++ /dev/null @@ -1,1000 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_rtc_ex.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of RTC HAL Extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_RTC_EX_H -#define __STM32F4xx_HAL_RTC_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup RTCEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup RTCEx_Exported_Types RTCEx Exported Types - * @{ - */ - -/** - * @brief RTC Tamper structure definition - */ -typedef struct -{ - uint32_t Tamper; /*!< Specifies the Tamper Pin. - This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */ - - uint32_t PinSelection; /*!< Specifies the Tamper Pin. - This parameter can be a value of @ref RTCEx_Tamper_Pins_Selection */ - - uint32_t Trigger; /*!< Specifies the Tamper Trigger. - This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */ - - uint32_t Filter; /*!< Specifies the RTC Filter Tamper. - This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */ - - uint32_t SamplingFrequency; /*!< Specifies the sampling frequency. - This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */ - - uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration . - This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */ - - uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp . - This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */ - - uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection. - This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */ -}RTC_TamperTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants - * @{ - */ - -/** @defgroup RTCEx_Backup_Registers_Definitions RTC Backup Registers Definitions - * @{ - */ -#define RTC_BKP_DR0 ((uint32_t)0x00000000) -#define RTC_BKP_DR1 ((uint32_t)0x00000001) -#define RTC_BKP_DR2 ((uint32_t)0x00000002) -#define RTC_BKP_DR3 ((uint32_t)0x00000003) -#define RTC_BKP_DR4 ((uint32_t)0x00000004) -#define RTC_BKP_DR5 ((uint32_t)0x00000005) -#define RTC_BKP_DR6 ((uint32_t)0x00000006) -#define RTC_BKP_DR7 ((uint32_t)0x00000007) -#define RTC_BKP_DR8 ((uint32_t)0x00000008) -#define RTC_BKP_DR9 ((uint32_t)0x00000009) -#define RTC_BKP_DR10 ((uint32_t)0x0000000A) -#define RTC_BKP_DR11 ((uint32_t)0x0000000B) -#define RTC_BKP_DR12 ((uint32_t)0x0000000C) -#define RTC_BKP_DR13 ((uint32_t)0x0000000D) -#define RTC_BKP_DR14 ((uint32_t)0x0000000E) -#define RTC_BKP_DR15 ((uint32_t)0x0000000F) -#define RTC_BKP_DR16 ((uint32_t)0x00000010) -#define RTC_BKP_DR17 ((uint32_t)0x00000011) -#define RTC_BKP_DR18 ((uint32_t)0x00000012) -#define RTC_BKP_DR19 ((uint32_t)0x00000013) -/** - * @} - */ - -/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTC TimeStamp Edges Definitions - * @{ - */ -#define RTC_TIMESTAMPEDGE_RISING ((uint32_t)0x00000000) -#define RTC_TIMESTAMPEDGE_FALLING ((uint32_t)0x00000008) -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Pins_Definitions RTC Tamper Pins Definitions - * @{ - */ -#define RTC_TAMPER_1 RTC_TAFCR_TAMP1E -#define RTC_TAMPER_2 RTC_TAFCR_TAMP2E -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Pins_Selection RTC tamper Pins Selection - * @{ - */ -#define RTC_TAMPERPIN_DEFAULT ((uint32_t)0x00000000) -#define RTC_TAMPERPIN_POS1 ((uint32_t)0x00010000) - -/** - * @} - */ - -/** @defgroup RTCEx_TimeStamp_Pin_Selection RTC TimeStamp Pins Selection - * @{ - */ -#define RTC_TIMESTAMPPIN_DEFAULT ((uint32_t)0x00000000) -#define RTC_TIMESTAMPPIN_POS1 ((uint32_t)0x00020000) - -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Trigger_Definitions RTC Tamper Triggers Definitions - * @{ - */ -#define RTC_TAMPERTRIGGER_RISINGEDGE ((uint32_t)0x00000000) -#define RTC_TAMPERTRIGGER_FALLINGEDGE ((uint32_t)0x00000002) -#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE -#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Filter_Definitions RTC Tamper Filter Definitions - * @{ - */ -#define RTC_TAMPERFILTER_DISABLE ((uint32_t)0x00000000) /*!< Tamper filter is disabled */ - -#define RTC_TAMPERFILTER_2SAMPLE ((uint32_t)0x00000800) /*!< Tamper is activated after 2 - consecutive samples at the active level */ -#define RTC_TAMPERFILTER_4SAMPLE ((uint32_t)0x00001000) /*!< Tamper is activated after 4 - consecutive samples at the active level */ -#define RTC_TAMPERFILTER_8SAMPLE ((uint32_t)0x00001800) /*!< Tamper is activated after 8 - consecutive samples at the active level. */ -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTC Tamper Sampling Frequencies Definitions - * @{ - */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 ((uint32_t)0x00000000) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 32768 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 ((uint32_t)0x00000100) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 16384 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 ((uint32_t)0x00000200) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 8192 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 ((uint32_t)0x00000300) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 4096 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 ((uint32_t)0x00000400) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 2048 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 ((uint32_t)0x00000500) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 1024 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 ((uint32_t)0x00000600) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 512 */ -#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 ((uint32_t)0x00000700) /*!< Each of the tamper inputs are sampled - with a frequency = RTCCLK / 256 */ -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTC Tamper Pin Precharge Duration Definitions - * @{ - */ -#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK ((uint32_t)0x00000000) /*!< Tamper pins are pre-charged before - sampling during 1 RTCCLK cycle */ -#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK ((uint32_t)0x00002000) /*!< Tamper pins are pre-charged before - sampling during 2 RTCCLK cycles */ -#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK ((uint32_t)0x00004000) /*!< Tamper pins are pre-charged before - sampling during 4 RTCCLK cycles */ -#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK ((uint32_t)0x00006000) /*!< Tamper pins are pre-charged before - sampling during 8 RTCCLK cycles */ -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTC Tamper TimeStamp On Tamper Detection Definitions - * @{ - */ -#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAFCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */ -#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event is not saved */ -/** - * @} - */ - -/** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTC Tamper Pull Up Definitions - * @{ - */ -#define RTC_TAMPER_PULLUP_ENABLE ((uint32_t)0x00000000) /*!< TimeStamp on Tamper Detection event saved */ -#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS) /*!< TimeStamp on Tamper Detection event is not saved */ -/** - * @} - */ - -/** @defgroup RTCEx_Wakeup_Timer_Definitions RTC Wake-up Timer Definitions - * @{ - */ -#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000) -#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 ((uint32_t)0x00000001) -#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 ((uint32_t)0x00000002) -#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t)0x00000003) -#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS ((uint32_t)0x00000004) -#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t)0x00000006) -/** - * @} - */ - -/** @defgroup RTCEx_Digital_Calibration_Definitions RTC Digital Calib Definitions - * @{ - */ -#define RTC_CALIBSIGN_POSITIVE ((uint32_t)0x00000000) -#define RTC_CALIBSIGN_NEGATIVE ((uint32_t)0x00000080) -/** - * @} - */ - -/** @defgroup RTCEx_Smooth_calib_period_Definitions RTC Smooth Calib Period Definitions - * @{ - */ -#define RTC_SMOOTHCALIB_PERIOD_32SEC ((uint32_t)0x00000000) /*!< If RTCCLK = 32768 Hz, Smooth calibration - period is 32s, else 2exp20 RTCCLK seconds */ -#define RTC_SMOOTHCALIB_PERIOD_16SEC ((uint32_t)0x00002000) /*!< If RTCCLK = 32768 Hz, Smooth calibration - period is 16s, else 2exp19 RTCCLK seconds */ -#define RTC_SMOOTHCALIB_PERIOD_8SEC ((uint32_t)0x00004000) /*!< If RTCCLK = 32768 Hz, Smooth calibration - period is 8s, else 2exp18 RTCCLK seconds */ -/** - * @} - */ - -/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTC Smooth Calib Plus Pulses Definitions - * @{ - */ -#define RTC_SMOOTHCALIB_PLUSPULSES_SET ((uint32_t)0x00008000) /*!< The number of RTCCLK pulses added - during a X -second window = Y - CALM[8:0] - with Y = 512, 256, 128 when X = 32, 16, 8 */ -#define RTC_SMOOTHCALIB_PLUSPULSES_RESET ((uint32_t)0x00000000) /*!< The number of RTCCLK pulses subbstited - during a 32-second window = CALM[8:0] */ -/** - * @} - */ - -/** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTC Add 1 Second Parameter Definitions - * @{ - */ -#define RTC_SHIFTADD1S_RESET ((uint32_t)0x00000000) -#define RTC_SHIFTADD1S_SET ((uint32_t)0x80000000) -/** - * @} - */ - - - /** @defgroup RTCEx_Calib_Output_selection_Definitions RTC Calib Output Selection Definitions - * @{ - */ -#define RTC_CALIBOUTPUT_512HZ ((uint32_t)0x00000000) -#define RTC_CALIBOUTPUT_1HZ ((uint32_t)0x00080000) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros - * @{ - */ - -/* ---------------------------------WAKEUPTIMER---------------------------------*/ -/** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer - * @{ - */ - -/** - * @brief Enable the RTC WakeUp Timer peripheral. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE)) - -/** - * @brief Disable the RTC Wake-up Timer peripheral. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE)) - -/** - * @brief Enable the RTC WakeUpTimer interrupt. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled. - * This parameter can be: - * @arg RTC_IT_WUT: WakeUpTimer A interrupt - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) - -/** - * @brief Disable the RTC WakeUpTimer interrupt. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled. - * This parameter can be: - * @arg RTC_IT_WUT: WakeUpTimer A interrupt - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) - -/** - * @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt to check. - * This parameter can be: - * @arg RTC_IT_WUT: WakeUpTimer A interrupt - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET) - -/** - * @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC Wake Up timer interrupt sources to check. - * This parameter can be: - * @arg RTC_IT_WUT: WakeUpTimer interrupt - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET) - -/** - * @brief Get the selected RTC WakeUpTimer's flag status. - * @param __HANDLE__: specifies the RTC handle. - * @param __FLAG__: specifies the RTC WakeUpTimer Flag to check. - * This parameter can be: - * @arg RTC_FLAG_WUTF - * @arg RTC_FLAG_WUTWF - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET) - -/** - * @brief Clear the RTC Wake Up timer's pending flags. - * @param __HANDLE__: specifies the RTC handle. - * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled. - * This parameter can be: - * @arg RTC_FLAG_WUTF - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) - -/** - * @brief Enable interrupt on the RTC Wake-up Timer associated Exti line. - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Disable interrupt on the RTC Wake-up Timer associated Exti line. - * @retval None - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) - -/** - * @brief Enable event on the RTC Wake-up Timer associated Exti line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Disable event on the RTC Wake-up Timer associated Exti line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) - -/** - * @brief Enable falling edge trigger on the RTC Wake-up Timer associated Exti line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Disable falling edge trigger on the RTC Wake-up Timer associated Exti line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) - -/** - * @brief Enable rising edge trigger on the RTC Wake-up Timer associated Exti line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Disable rising edge trigger on the RTC Wake-up Timer associated Exti line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) - -/** - * @brief Enable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE(); - -/** - * @brief Disable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line. - * This parameter can be: - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE(); - -/** - * @brief Check whether the RTC Wake-up Timer associated Exti line interrupt flag is set or not. - * @retval Line Status. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Clear the RTC Wake-up Timer associated Exti line flag. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @brief Generate a Software interrupt on the RTC Wake-up Timer associated Exti line. - * @retval None. - */ -#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) - -/** - * @} - */ - -/* ---------------------------------TIMESTAMP---------------------------------*/ -/** @defgroup RTCEx_Timestamp RTC Timestamp - * @{ - */ - -/** - * @brief Enable the RTC TimeStamp peripheral. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE)) - -/** - * @brief Disable the RTC TimeStamp peripheral. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE)) - -/** - * @brief Enable the RTC TimeStamp interrupt. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled. - * This parameter can be: - * @arg RTC_IT_TS: TimeStamp interrupt - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) - -/** - * @brief Disable the RTC TimeStamp interrupt. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled. - * This parameter can be: - * @arg RTC_IT_TS: TimeStamp interrupt - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) - -/** - * @brief Check whether the specified RTC TimeStamp interrupt has occurred or not. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC TimeStamp interrupt to check. - * This parameter can be: - * @arg RTC_IT_TS: TimeStamp interrupt - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET) - -/** - * @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC Time Stamp interrupt source to check. - * This parameter can be: - * @arg RTC_IT_TS: TimeStamp interrupt - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET) - -/** - * @brief Get the selected RTC TimeStamp's flag status. - * @param __HANDLE__: specifies the RTC handle. - * @param __FLAG__: specifies the RTC TimeStamp flag to check. - * This parameter can be: - * @arg RTC_FLAG_TSF - * @arg RTC_FLAG_TSOVF - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET) - -/** - * @brief Clear the RTC Time Stamp's pending flags. - * @param __HANDLE__: specifies the RTC handle. - * @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled. - * This parameter can be: - * @arg RTC_FLAG_TSF - * @retval None - */ -#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) - -/** - * @} - */ - -/* ---------------------------------TAMPER------------------------------------*/ -/** @defgroup RTCEx_Tamper RTC Tamper - * @{ - */ - -/** - * @brief Enable the RTC Tamper1 input detection. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP1E)) - -/** - * @brief Disable the RTC Tamper1 input detection. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP1E)) - -/** - * @brief Enable the RTC Tamper2 input detection. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP2E)) - -/** - * @brief Disable the RTC Tamper2 input detection. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP2E)) - -/** - * @brief Check whether the specified RTC Tamper interrupt has occurred or not. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC Tamper interrupt to check. - * This parameter can be: - * @arg RTC_IT_TAMP1 - * @arg RTC_IT_TAMP2 - * @retval None - */ -#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4)) != RESET)? SET : RESET) - -/** - * @brief Check whether the specified RTC Tamper interrupt has been enabled or not. - * @param __HANDLE__: specifies the RTC handle. - * @param __INTERRUPT__: specifies the RTC Tamper interrupt source to check. - * This parameter can be: - * @arg RTC_IT_TAMP: Tamper interrupt - * @retval None - */ -#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAFCR) & (__INTERRUPT__)) != RESET) ? SET : RESET) - -/** - * @brief Get the selected RTC Tamper's flag status. - * @param __HANDLE__: specifies the RTC handle. - * @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled. - * This parameter can be: - * @arg RTC_FLAG_TAMP1F - * @arg RTC_FLAG_TAMP2F - * @retval None - */ -#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET) - -/** - * @brief Clear the RTC Tamper's pending flags. - * @param __HANDLE__: specifies the RTC handle. - * @param __FLAG__: specifies the RTC Tamper Flag to clear. - * This parameter can be: - * @arg RTC_FLAG_TAMP1F - * @arg RTC_FLAG_TAMP2F - * @retval None - */ -#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) -/** - * @} - */ - -/* --------------------------TAMPER/TIMESTAMP---------------------------------*/ -/** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Tamper Timestamp EXTI - * @{ - */ - -/** - * @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line. - * @retval None - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line. - * @retval None - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) - -/** - * @brief Enable event on the RTC Tamper and Timestamp associated Exti line. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Disable event on the RTC Tamper and Timestamp associated Exti line. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) - -/** - * @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) - -/** - * @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) - -/** - * @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); - -/** - * @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. - * This parameter can be: - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE(); - -/** - * @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not. - * @retval Line Status. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Clear the RTC Tamper and Timestamp associated Exti line flag. - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) - -/** - * @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line - * @retval None. - */ -#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) -/** - * @} - */ - -/* ------------------------------Calibration----------------------------------*/ -/** @defgroup RTCEx_Calibration RTC Calibration - * @{ - */ - -/** - * @brief Enable the Coarse calibration process. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_COARSE_CALIB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_DCE)) - -/** - * @brief Disable the Coarse calibration process. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_COARSE_CALIB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_DCE)) - -/** - * @brief Enable the RTC calibration output. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE)) - -/** - * @brief Disable the calibration output. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE)) - -/** - * @brief Enable the clock reference detection. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON)) - -/** - * @brief Disable the clock reference detection. - * @param __HANDLE__: specifies the RTC handle. - * @retval None - */ -#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON)) - -/** - * @brief Get the selected RTC shift operation's flag status. - * @param __HANDLE__: specifies the RTC handle. - * @param __FLAG__: specifies the RTC shift operation Flag is pending or not. - * This parameter can be: - * @arg RTC_FLAG_SHPF - * @retval None - */ -#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET) -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions - * @{ - */ - -/** @addtogroup RTCEx_Exported_Functions_Group1 - * @{ - */ -/* RTC TimeStamp and Tamper functions *****************************************/ -HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); -HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); -HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format); - -HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); -HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); -HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper); -void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc); - -void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc); -void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc); -void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); -HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); -HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); -/** - * @} - */ - -/** @addtogroup RTCEx_Exported_Functions_Group2 - * @{ - */ -/* RTC Wake-up functions ******************************************************/ -HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); -HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); -uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc); -uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc); -void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc); -void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); -/** - * @} - */ - -/** @addtogroup RTCEx_Exported_Functions_Group3 - * @{ - */ -/* Extension Control functions ************************************************/ -void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data); -uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister); - -HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef *hrtc, uint32_t CalibSign, uint32_t Value); -HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue); -HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS); -HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput); -HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc); -/** - * @} - */ - -/** @addtogroup RTCEx_Exported_Functions_Group4 - * @{ - */ -/* Extension RTC features functions *******************************************/ -void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc); -HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup RTCEx_Private_Constants RTCEx Private Constants - * @{ - */ -#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)EXTI_IMR_MR21) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */ -#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)EXTI_IMR_MR22) /*!< External interrupt line 22 Connected to the RTC Wake-up event */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup RTCEx_Private_Macros RTCEx Private Macros - * @{ - */ - -/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters - * @{ - */ -#define IS_RTC_BKP(BKP) (((BKP) == RTC_BKP_DR0) || \ - ((BKP) == RTC_BKP_DR1) || \ - ((BKP) == RTC_BKP_DR2) || \ - ((BKP) == RTC_BKP_DR3) || \ - ((BKP) == RTC_BKP_DR4) || \ - ((BKP) == RTC_BKP_DR5) || \ - ((BKP) == RTC_BKP_DR6) || \ - ((BKP) == RTC_BKP_DR7) || \ - ((BKP) == RTC_BKP_DR8) || \ - ((BKP) == RTC_BKP_DR9) || \ - ((BKP) == RTC_BKP_DR10) || \ - ((BKP) == RTC_BKP_DR11) || \ - ((BKP) == RTC_BKP_DR12) || \ - ((BKP) == RTC_BKP_DR13) || \ - ((BKP) == RTC_BKP_DR14) || \ - ((BKP) == RTC_BKP_DR15) || \ - ((BKP) == RTC_BKP_DR16) || \ - ((BKP) == RTC_BKP_DR17) || \ - ((BKP) == RTC_BKP_DR18) || \ - ((BKP) == RTC_BKP_DR19)) -#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \ - ((EDGE) == RTC_TIMESTAMPEDGE_FALLING)) -#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & ((uint32_t)!(RTC_TAFCR_TAMP1E | RTC_TAFCR_TAMP2E))) == 0x00) && ((TAMPER) != (uint32_t)RESET)) - -#define IS_RTC_TAMPER_PIN(PIN) (((PIN) == RTC_TAMPERPIN_DEFAULT) || \ - ((PIN) == RTC_TAMPERPIN_POS1)) - -#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT) || \ - ((PIN) == RTC_TIMESTAMPPIN_POS1)) - -#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \ - ((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \ - ((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \ - ((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL)) -#define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \ - ((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \ - ((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \ - ((FILTER) == RTC_TAMPERFILTER_8SAMPLE)) -#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \ - ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \ - ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \ - ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \ - ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \ - ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \ - ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \ - ((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256)) -#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \ - ((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \ - ((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \ - ((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK)) -#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \ - ((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE)) -#define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \ - ((STATE) == RTC_TAMPER_PULLUP_DISABLE)) -#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \ - ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \ - ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \ - ((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \ - ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \ - ((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS)) - -#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFF) -#define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CALIBSIGN_POSITIVE) || \ - ((SIGN) == RTC_CALIBSIGN_NEGATIVE)) - -#define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20) - -#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \ - ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \ - ((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC)) -#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \ - ((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET)) - - -#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FF) -#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \ - ((SEL) == RTC_SHIFTADD1S_SET)) -#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFF) -#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \ - ((OUTPUT) == RTC_CALIBOUTPUT_1HZ)) -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_RTC_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sai.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sai.h deleted file mode 100644 index f71f2fb..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sai.h +++ /dev/null @@ -1,908 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_sai.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of SAI HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_SAI_H -#define __STM32F4xx_HAL_SAI_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) - -/** @addtogroup SAI - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup SAI_Exported_Types SAI Exported Types - * @{ - */ - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_SAI_STATE_RESET = 0x00, /*!< SAI not yet initialized or disabled */ - HAL_SAI_STATE_READY = 0x01, /*!< SAI initialized and ready for use */ - HAL_SAI_STATE_BUSY = 0x02, /*!< SAI internal process is ongoing */ - HAL_SAI_STATE_BUSY_TX = 0x12, /*!< Data transmission process is ongoing */ - HAL_SAI_STATE_BUSY_RX = 0x22, /*!< Data reception process is ongoing */ - HAL_SAI_STATE_TIMEOUT = 0x03, /*!< SAI timeout state */ - HAL_SAI_STATE_ERROR = 0x04 /*!< SAI error state */ -}HAL_SAI_StateTypeDef; - -/** - * @brief SAI Callback prototype - */ -typedef void (*SAIcallback)(void); - -/** - * @brief SAI Init Structure definition - */ -typedef struct -{ - uint32_t AudioMode; /*!< Specifies the SAI Block audio Mode. - This parameter can be a value of @ref SAI_Block_Mode */ - - uint32_t Synchro; /*!< Specifies SAI Block synchronization - This parameter can be a value of @ref SAI_Block_Synchronization */ - - uint32_t SynchroExt; /*!< Specifies SAI Block synchronization, this setup is common - for BLOCKA and BLOCKB - This parameter can be a value of @ref SAI_Block_SyncExt */ - - uint32_t OutputDrive; /*!< Specifies when SAI Block outputs are driven. - This parameter can be a value of @ref SAI_Block_Output_Drive - @note this value has to be set before enabling the audio block - but after the audio block configuration. */ - - uint32_t NoDivider; /*!< Specifies whether master clock will be divided or not. - This parameter can be a value of @ref SAI_Block_NoDivider - @note: If bit NODIV in the SAI_xCR1 register is cleared, the frame length - should be aligned to a number equal to a power of 2, from 8 to 256. - If bit NODIV in the SAI_xCR1 register is set, the frame length can - take any of the values without constraint since the input clock of - the audio block should be equal to the bit clock. - There is no MCLK_x clock which can be output. */ - - uint32_t FIFOThreshold; /*!< Specifies SAI Block FIFO threshold. - This parameter can be a value of @ref SAI_Block_Fifo_Threshold */ - - uint32_t ClockSource; /*!< Specifies the SAI Block x Clock source. - This parameter is not used for STM32F446xx devices. */ - - uint32_t AudioFrequency; /*!< Specifies the audio frequency sampling. - This parameter can be a value of @ref SAI_Audio_Frequency */ - - uint32_t Mckdiv; /*!< Specifies the master clock divider, the parameter will be used if for - AudioFrequency the user choice - This parameter must be a number between Min_Data = 0 and Max_Data = 15 */ - - uint32_t MonoStereoMode; /*!< Specifies if the mono or stereo mode is selected. - This parameter can be a value of @ref SAI_Mono_Stereo_Mode */ - - uint32_t CompandingMode; /*!< Specifies the companding mode type. - This parameter can be a value of @ref SAI_Block_Companding_Mode */ - - uint32_t TriState; /*!< Specifies the companding mode type. - This parameter can be a value of @ref SAI_TRIState_Management */ - - /* This part of the structure is automatically filled if your are using the high level intialisation - function HAL_SAI_InitProtocol */ - - uint32_t Protocol; /*!< Specifies the SAI Block protocol. - This parameter can be a value of @ref SAI_Block_Protocol */ - - uint32_t DataSize; /*!< Specifies the SAI Block data size. - This parameter can be a value of @ref SAI_Block_Data_Size */ - - uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. - This parameter can be a value of @ref SAI_Block_MSB_LSB_transmission */ - - uint32_t ClockStrobing; /*!< Specifies the SAI Block clock strobing edge sensitivity. - This parameter can be a value of @ref SAI_Block_Clock_Strobing */ -}SAI_InitTypeDef; - -/** - * @brief SAI Block Frame Init structure definition - */ - -typedef struct -{ - - uint32_t FrameLength; /*!< Specifies the Frame length, the number of SCK clocks for each audio frame. - This parameter must be a number between Min_Data = 8 and Max_Data = 256. - @note: If master clock MCLK_x pin is declared as an output, the frame length - should be aligned to a number equal to power of 2 in order to keep - in an audio frame, an integer number of MCLK pulses by bit Clock. */ - - uint32_t ActiveFrameLength; /*!< Specifies the Frame synchronization active level length. - This Parameter specifies the length in number of bit clock (SCK + 1) - of the active level of FS signal in audio frame. - This parameter must be a number between Min_Data = 1 and Max_Data = 128 */ - - uint32_t FSDefinition; /*!< Specifies the Frame synchronization definition. - This parameter can be a value of @ref SAI_Block_FS_Definition */ - - uint32_t FSPolarity; /*!< Specifies the Frame synchronization Polarity. - This parameter can be a value of @ref SAI_Block_FS_Polarity */ - - uint32_t FSOffset; /*!< Specifies the Frame synchronization Offset. - This parameter can be a value of @ref SAI_Block_FS_Offset */ - -}SAI_FrameInitTypeDef; - -/** - * @brief SAI Block Slot Init Structure definition - */ - -typedef struct -{ - uint32_t FirstBitOffset; /*!< Specifies the position of first data transfer bit in the slot. - This parameter must be a number between Min_Data = 0 and Max_Data = 24 */ - - uint32_t SlotSize; /*!< Specifies the Slot Size. - This parameter can be a value of @ref SAI_Block_Slot_Size */ - - uint32_t SlotNumber; /*!< Specifies the number of slot in the audio frame. - This parameter must be a number between Min_Data = 1 and Max_Data = 16 */ - - uint32_t SlotActive; /*!< Specifies the slots in audio frame that will be activated. - This parameter can be a value of @ref SAI_Block_Slot_Active */ -}SAI_SlotInitTypeDef; - -/** - * @brief SAI handle Structure definition - */ -typedef struct __SAI_HandleTypeDef -{ - SAI_Block_TypeDef *Instance; /*!< SAI Blockx registers base address */ - - SAI_InitTypeDef Init; /*!< SAI communication parameters */ - - SAI_FrameInitTypeDef FrameInit; /*!< SAI Frame configuration parameters */ - - SAI_SlotInitTypeDef SlotInit; /*!< SAI Slot configuration parameters */ - - uint8_t *pBuffPtr; /*!< Pointer to SAI transfer Buffer */ - - uint16_t XferSize; /*!< SAI transfer size */ - - uint16_t XferCount; /*!< SAI transfer counter */ - - DMA_HandleTypeDef *hdmatx; /*!< SAI Tx DMA handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< SAI Rx DMA handle parameters */ - - SAIcallback mutecallback;/*!< SAI mute callback */ - - void (*InterruptServiceRoutine)(struct __SAI_HandleTypeDef *hsai); /* function pointer for IRQ handler */ - - HAL_LockTypeDef Lock; /*!< SAI locking object */ - - __IO HAL_SAI_StateTypeDef State; /*!< SAI communication state */ - - __IO uint32_t ErrorCode; /*!< SAI Error code */ -}SAI_HandleTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup SAI_Exported_Constants SAI Exported Constants - * @{ - */ - -/** @defgroup SAI_Error_Code SAI Error Code - * @{ - */ -#define HAL_SAI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ -#define HAL_SAI_ERROR_OVR ((uint32_t)0x00000001) /*!< Overrun Error */ -#define HAL_SAI_ERROR_UDR ((uint32_t)0x00000002) /*!< Underrun error */ -#define HAL_SAI_ERROR_AFSDET ((uint32_t)0x00000004) /*!< Anticipated Frame synchronisation detection */ -#define HAL_SAI_ERROR_LFSDET ((uint32_t)0x00000008) /*!< Late Frame synchronisation detection */ -#define HAL_SAI_ERROR_CNREADY ((uint32_t)0x00000010) /*!< codec not ready */ -#define HAL_SAI_ERROR_WCKCFG ((uint32_t)0x00000020) /*!< Wrong clock configuration */ -#define HAL_SAI_ERROR_TIMEOUT ((uint32_t)0x00000040) /*!< Timeout error */ -/** - * @} - */ - -/** @defgroup SAI_Block_SyncExt SAI External synchronisation - * @{ - */ -#define SAI_SYNCEXT_DISABLE ((uint32_t)0x00000000) -#define SAI_SYNCEXT_IN_ENABLE ((uint32_t)0x00000001) -#define SAI_SYNCEXT_OUTBLOCKA_ENABLE ((uint32_t)0x00000002) -#define SAI_SYNCEXT_OUTBLOCKB_ENABLE ((uint32_t)0x00000004) -/** - * @} - */ - -/** @defgroup SAI_Protocol SAI Supported protocol - * @{ - */ -#define SAI_I2S_STANDARD ((uint32_t)0x00000000) -#define SAI_I2S_MSBJUSTIFIED ((uint32_t)0x00000001) -#define SAI_I2S_LSBJUSTIFIED ((uint32_t)0x00000002) -#define SAI_PCM_LONG ((uint32_t)0x00000004) -#define SAI_PCM_SHORT ((uint32_t)0x00000008) -/** - * @} - */ - -/** @defgroup SAI_Protocol_DataSize SAI protocol data size - * @{ - */ -#define SAI_PROTOCOL_DATASIZE_16BIT ((uint32_t)0x00000000) -#define SAI_PROTOCOL_DATASIZE_16BITEXTENDED ((uint32_t)0x00000001) -#define SAI_PROTOCOL_DATASIZE_24BIT ((uint32_t)0x00000002) -#define SAI_PROTOCOL_DATASIZE_32BIT ((uint32_t)0x00000004) -/** - * @} - */ - -/** @defgroup SAI_Clock_Source SAI Clock Source - * @{ - */ -#define SAI_CLKSOURCE_PLLSAI ((uint32_t)0x00000000) -#define SAI_CLKSOURCE_PLLI2S ((uint32_t)0x00100000) -#define SAI_CLKSOURCE_EXT ((uint32_t)0x00200000) -#define SAI_CLKSOURCE_NA ((uint32_t)0x00400000) /*!< No applicable for STM32F446xx */ -/** - * @} - */ - -/** @defgroup SAI_Audio_Frequency SAI Audio Frequency - * @{ - */ -#define SAI_AUDIO_FREQUENCY_192K ((uint32_t)192000) -#define SAI_AUDIO_FREQUENCY_96K ((uint32_t)96000) -#define SAI_AUDIO_FREQUENCY_48K ((uint32_t)48000) -#define SAI_AUDIO_FREQUENCY_44K ((uint32_t)44100) -#define SAI_AUDIO_FREQUENCY_32K ((uint32_t)32000) -#define SAI_AUDIO_FREQUENCY_22K ((uint32_t)22050) -#define SAI_AUDIO_FREQUENCY_16K ((uint32_t)16000) -#define SAI_AUDIO_FREQUENCY_11K ((uint32_t)11025) -#define SAI_AUDIO_FREQUENCY_8K ((uint32_t)8000) -#define SAI_AUDIO_FREQUENCY_MCKDIV ((uint32_t)0) - -/** - * @} - */ - -/** @defgroup SAI_Block_Mode SAI Block Mode - * @{ - */ -#define SAI_MODEMASTER_TX ((uint32_t)0x00000000) -#define SAI_MODEMASTER_RX ((uint32_t)SAI_xCR1_MODE_0) -#define SAI_MODESLAVE_TX ((uint32_t)SAI_xCR1_MODE_1) -#define SAI_MODESLAVE_RX ((uint32_t)(SAI_xCR1_MODE_1 | SAI_xCR1_MODE_0)) - -/** - * @} - */ - -/** @defgroup SAI_Block_Protocol SAI Block Protocol - * @{ - */ -#define SAI_FREE_PROTOCOL ((uint32_t)0x00000000) -#define SAI_SPDIF_PROTOCOL ((uint32_t)SAI_xCR1_PRTCFG_0) -#define SAI_AC97_PROTOCOL ((uint32_t)SAI_xCR1_PRTCFG_1) - -/** - * @} - */ - -/** @defgroup SAI_Block_Data_Size SAI Block Data Size - * @{ - */ -#define SAI_DATASIZE_8 ((uint32_t)SAI_xCR1_DS_1) -#define SAI_DATASIZE_10 ((uint32_t)(SAI_xCR1_DS_1 | SAI_xCR1_DS_0)) -#define SAI_DATASIZE_16 ((uint32_t)SAI_xCR1_DS_2) -#define SAI_DATASIZE_20 ((uint32_t)(SAI_xCR1_DS_2 | SAI_xCR1_DS_0)) -#define SAI_DATASIZE_24 ((uint32_t)(SAI_xCR1_DS_2 | SAI_xCR1_DS_1)) -#define SAI_DATASIZE_32 ((uint32_t)(SAI_xCR1_DS_2 | SAI_xCR1_DS_1 | SAI_xCR1_DS_0)) - -/** - * @} - */ - -/** @defgroup SAI_Block_MSB_LSB_transmission SAI Block MSB LSB transmission - * @{ - */ -#define SAI_FIRSTBIT_MSB ((uint32_t)0x00000000) -#define SAI_FIRSTBIT_LSB ((uint32_t)SAI_xCR1_LSBFIRST) - -/** - * @} - */ - -/** @defgroup SAI_Block_Clock_Strobing SAI Block Clock Strobing - * @{ - */ -#define SAI_CLOCKSTROBING_FALLINGEDGE ((uint32_t)0x00000000) -#define SAI_CLOCKSTROBING_RISINGEDGE ((uint32_t)SAI_xCR1_CKSTR) - -/** - * @} - */ - -/** @defgroup SAI_Block_Synchronization SAI Block Synchronization - * @{ - */ -#define SAI_ASYNCHRONOUS ((uint32_t)0x00000000) -#define SAI_SYNCHRONOUS ((uint32_t)SAI_xCR1_SYNCEN_0) -#define SAI_SYNCHRONOUS_EXT ((uint32_t)SAI_xCR1_SYNCEN_1) - -/** - * @} - */ - -/** @defgroup SAI_Block_Output_Drive SAI Block Output Drive - * @{ - */ -#define SAI_OUTPUTDRIVE_DISABLE ((uint32_t)0x00000000) -#define SAI_OUTPUTDRIVE_ENABLE ((uint32_t)SAI_xCR1_OUTDRIV) - -/** - * @} - */ - -/** @defgroup SAI_Block_NoDivider SAI Block NoDivider - * @{ - */ -#define SAI_MASTERDIVIDER_ENABLE ((uint32_t)0x00000000) -#define SAI_MASTERDIVIDER_DISABLE ((uint32_t)SAI_xCR1_NODIV) - -/** - * @} - */ - - -/** @defgroup SAI_Block_FS_Definition SAI Block FS Definition - * @{ - */ -#define SAI_FS_STARTFRAME ((uint32_t)0x00000000) -#define SAI_FS_CHANNEL_IDENTIFICATION ((uint32_t)SAI_xFRCR_FSDEF) - -/** - * @} - */ - -/** @defgroup SAI_Block_FS_Polarity SAI Block FS Polarity - * @{ - */ -#define SAI_FS_ACTIVE_LOW ((uint32_t)0x00000000) -#define SAI_FS_ACTIVE_HIGH ((uint32_t)SAI_xFRCR_FSPO) - -/** - * @} - */ - -/** @defgroup SAI_Block_FS_Offset SAI Block FS Offset - * @{ - */ -#define SAI_FS_FIRSTBIT ((uint32_t)0x00000000) -#define SAI_FS_BEFOREFIRSTBIT ((uint32_t)SAI_xFRCR_FSOFF) - -/** - * @} - */ - - - /** @defgroup SAI_Block_Slot_Size SAI Block Slot Size - * @{ - */ -#define SAI_SLOTSIZE_DATASIZE ((uint32_t)0x00000000) -#define SAI_SLOTSIZE_16B ((uint32_t)SAI_xSLOTR_SLOTSZ_0) -#define SAI_SLOTSIZE_32B ((uint32_t)SAI_xSLOTR_SLOTSZ_1) -/** - * @} - */ - -/** @defgroup SAI_Block_Slot_Active SAI Block Slot Active - * @{ - */ -#define SAI_SLOT_NOTACTIVE ((uint32_t)0x00000000) -#define SAI_SLOTACTIVE_0 ((uint32_t)0x00010000) -#define SAI_SLOTACTIVE_1 ((uint32_t)0x00020000) -#define SAI_SLOTACTIVE_2 ((uint32_t)0x00040000) -#define SAI_SLOTACTIVE_3 ((uint32_t)0x00080000) -#define SAI_SLOTACTIVE_4 ((uint32_t)0x00100000) -#define SAI_SLOTACTIVE_5 ((uint32_t)0x00200000) -#define SAI_SLOTACTIVE_6 ((uint32_t)0x00400000) -#define SAI_SLOTACTIVE_7 ((uint32_t)0x00800000) -#define SAI_SLOTACTIVE_8 ((uint32_t)0x01000000) -#define SAI_SLOTACTIVE_9 ((uint32_t)0x02000000) -#define SAI_SLOTACTIVE_10 ((uint32_t)0x04000000) -#define SAI_SLOTACTIVE_11 ((uint32_t)0x08000000) -#define SAI_SLOTACTIVE_12 ((uint32_t)0x10000000) -#define SAI_SLOTACTIVE_13 ((uint32_t)0x20000000) -#define SAI_SLOTACTIVE_14 ((uint32_t)0x40000000) -#define SAI_SLOTACTIVE_15 ((uint32_t)0x80000000) -#define SAI_SLOTACTIVE_ALL ((uint32_t)0xFFFF0000) - -/** - * @} - */ - -/** @defgroup SAI_Mono_Stereo_Mode SAI Mono Stereo Mode - * @{ - */ -#define SAI_STEREOMODE ((uint32_t)0x00000000) -#define SAI_MONOMODE ((uint32_t)SAI_xCR1_MONO) - -/** - * @} - */ - -/** @defgroup SAI_TRIState_Management SAI TRIState Management - * @{ - */ -#define SAI_OUTPUT_NOTRELEASED ((uint32_t)0x00000000) -#define SAI_OUTPUT_RELEASED ((uint32_t)SAI_xCR2_TRIS) - -/** - * @} - */ - -/** @defgroup SAI_Block_Fifo_Threshold SAI Block Fifo Threshold - * @{ - */ -#define SAI_FIFOTHRESHOLD_EMPTY ((uint32_t)0x00000000) -#define SAI_FIFOTHRESHOLD_1QF ((uint32_t)SAI_xCR2_FTH_0) -#define SAI_FIFOTHRESHOLD_HF ((uint32_t)SAI_xCR2_FTH_1) -#define SAI_FIFOTHRESHOLD_3QF ((uint32_t)(SAI_xCR2_FTH_1 | SAI_xCR2_FTH_0)) -#define SAI_FIFOTHRESHOLD_FULL ((uint32_t)SAI_xCR2_FTH_2) - -/** - * @} - */ - -/** @defgroup SAI_Block_Companding_Mode SAI Block Companding Mode - * @{ - */ -#define SAI_NOCOMPANDING ((uint32_t)0x00000000) -#define SAI_ULAW_1CPL_COMPANDING ((uint32_t)SAI_xCR2_COMP_1) -#define SAI_ALAW_1CPL_COMPANDING ((uint32_t)(SAI_xCR2_COMP_1 | SAI_xCR2_COMP_0)) -#define SAI_ULAW_2CPL_COMPANDING ((uint32_t)(SAI_xCR2_COMP_1 | SAI_xCR2_CPL)) -#define SAI_ALAW_2CPL_COMPANDING ((uint32_t)(SAI_xCR2_COMP_1 | SAI_xCR2_COMP_0 | SAI_xCR2_CPL)) - -/** - * @} - */ - -/** @defgroup SAI_Block_Mute_Value SAI Block Mute Value - * @{ - */ -#define SAI_ZERO_VALUE ((uint32_t)0x00000000) -#define SAI_LAST_SENT_VALUE ((uint32_t)SAI_xCR2_MUTEVAL) - -/** - * @} - */ - - -/** @defgroup SAI_Block_Interrupts_Definition SAI Block Interrupts Definition - * @{ - */ -#define SAI_IT_OVRUDR ((uint32_t)SAI_xIMR_OVRUDRIE) -#define SAI_IT_MUTEDET ((uint32_t)SAI_xIMR_MUTEDETIE) -#define SAI_IT_WCKCFG ((uint32_t)SAI_xIMR_WCKCFGIE) -#define SAI_IT_FREQ ((uint32_t)SAI_xIMR_FREQIE) -#define SAI_IT_CNRDY ((uint32_t)SAI_xIMR_CNRDYIE) -#define SAI_IT_AFSDET ((uint32_t)SAI_xIMR_AFSDETIE) -#define SAI_IT_LFSDET ((uint32_t)SAI_xIMR_LFSDETIE) - -/** - * @} - */ - -/** @defgroup SAI_Block_Flags_Definition SAI Block Flags Definition - * @{ - */ -#define SAI_FLAG_OVRUDR ((uint32_t)SAI_xSR_OVRUDR) -#define SAI_FLAG_MUTEDET ((uint32_t)SAI_xSR_MUTEDET) -#define SAI_FLAG_WCKCFG ((uint32_t)SAI_xSR_WCKCFG) -#define SAI_FLAG_FREQ ((uint32_t)SAI_xSR_FREQ) -#define SAI_FLAG_CNRDY ((uint32_t)SAI_xSR_CNRDY) -#define SAI_FLAG_AFSDET ((uint32_t)SAI_xSR_AFSDET) -#define SAI_FLAG_LFSDET ((uint32_t)SAI_xSR_LFSDET) - -/** - * @} - */ - -/** @defgroup SAI_Block_Fifo_Status_Level SAI Block Fifo Status Level - * @{ - */ -#define SAI_FIFOSTATUS_EMPTY ((uint32_t)0x00000000) -#define SAI_FIFOSTATUS_LESS1QUARTERFULL ((uint32_t)0x00010000) -#define SAI_FIFOSTATUS_1QUARTERFULL ((uint32_t)0x00020000) -#define SAI_FIFOSTATUS_HALFFULL ((uint32_t)0x00030000) -#define SAI_FIFOSTATUS_3QUARTERFULL ((uint32_t)0x00040000) -#define SAI_FIFOSTATUS_FULL ((uint32_t)0x00050000) - -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ - -/** @defgroup SAI_Exported_Macros SAI Exported Macros - * @brief macros to handle interrupts and specific configurations - * @{ - */ - -/** @brief Reset SAI handle state - * @param __HANDLE__: specifies the SAI Handle. - * @retval None - */ -#define __HAL_SAI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SAI_STATE_RESET) - -/** @brief Enable or disable the specified SAI interrupts. - * @param __HANDLE__: specifies the SAI Handle. - * @param __INTERRUPT__: specifies the interrupt source to enable or disable. - * This parameter can be one of the following values: - * @arg SAI_IT_OVRUDR: Overrun underrun interrupt enable - * @arg SAI_IT_MUTEDET: Mute detection interrupt enable - * @arg SAI_IT_WCKCFG: Wrong Clock Configuration interrupt enable - * @arg SAI_IT_FREQ: FIFO request interrupt enable - * @arg SAI_IT_CNRDY: Codec not ready interrupt enable - * @arg SAI_IT_AFSDET: Anticipated frame synchronization detection interrupt enable - * @arg SAI_IT_LFSDET: Late frame synchronization detection interrupt enabl - * @retval None - */ - -#define __HAL_SAI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__)) -#define __HAL_SAI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR &= (~(__INTERRUPT__))) - -/** @brief Check if the specified SAI interrupt source is enabled or disabled. - * @param __HANDLE__: specifies the SAI Handle. - * This parameter can be SAI where x: 1, 2, or 3 to select the SAI peripheral. - * @param __INTERRUPT__: specifies the SAI interrupt source to check. - * This parameter can be one of the following values: - * @arg SAI_IT_TXE: Tx buffer empty interrupt enable. - * @arg SAI_IT_RXNE: Rx buffer not empty interrupt enable. - * @arg SAI_IT_ERR: Error interrupt enable. - * @retval The new state of __INTERRUPT__ (TRUE or FALSE). - */ -#define __HAL_SAI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Check whether the specified SAI flag is set or not. - * @param __HANDLE__: specifies the SAI Handle. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg SAI_FLAG_OVRUDR: Overrun underrun flag. - * @arg SAI_FLAG_MUTEDET: Mute detection flag. - * @arg SAI_FLAG_WCKCFG: Wrong Clock Configuration flag. - * @arg SAI_FLAG_FREQ: FIFO request flag. - * @arg SAI_FLAG_CNRDY: Codec not ready flag. - * @arg SAI_FLAG_AFSDET: Anticipated frame synchronization detection flag. - * @arg SAI_FLAG_LFSDET: Late frame synchronization detection flag. - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_SAI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) - -/** @brief Clears the specified SAI pending flag. - * @param __HANDLE__: specifies the SAI Handle. - * @param __FLAG__: specifies the flag to check. - * This parameter can be any combination of the following values: - * @arg SAI_FLAG_OVRUDR: Clear Overrun underrun - * @arg SAI_FLAG_MUTEDET: Clear Mute detection - * @arg SAI_FLAG_WCKCFG: Clear Wrong Clock Configuration - * @arg SAI_FLAG_FREQ: Clear FIFO request - * @arg SAI_FLAG_CNRDY: Clear Codec not ready - * @arg SAI_FLAG_AFSDET: Clear Anticipated frame synchronization detection - * @arg SAI_FLAG_LFSDET: Clear Late frame synchronization detection - * - * @retval None - */ -#define __HAL_SAI_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->CLRFR = (__FLAG__)) - -#define __HAL_SAI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SAI_xCR1_SAIEN) -#define __HAL_SAI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SAI_xCR1_SAIEN) - - /** - * @} - */ - -/* Include RCC SAI Extension module */ -#include "stm32f4xx_hal_sai_ex.h" - -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup SAI_Exported_Functions - * @{ - */ - -/* Initialization/de-initialization functions **********************************/ -/** @addtogroup SAI_Exported_Functions_Group1 - * @{ - */ -HAL_StatusTypeDef HAL_SAI_InitProtocol(SAI_HandleTypeDef *hsai, uint32_t protocol, uint32_t datasize, uint32_t nbslot); -HAL_StatusTypeDef HAL_SAI_Init(SAI_HandleTypeDef *hsai); -HAL_StatusTypeDef HAL_SAI_DeInit (SAI_HandleTypeDef *hsai); -void HAL_SAI_MspInit(SAI_HandleTypeDef *hsai); -void HAL_SAI_MspDeInit(SAI_HandleTypeDef *hsai); - -/** - * @} - */ - -/* I/O operation functions *****************************************************/ -/** @addtogroup SAI_Exported_Functions_Group2 - * @{ - */ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_SAI_Transmit(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_SAI_Receive(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size, uint32_t Timeout); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_SAI_Transmit_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SAI_Receive_IT(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size); - -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_SAI_Transmit_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SAI_Receive_DMA(SAI_HandleTypeDef *hsai, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SAI_DMAPause(SAI_HandleTypeDef *hsai); -HAL_StatusTypeDef HAL_SAI_DMAResume(SAI_HandleTypeDef *hsai); -HAL_StatusTypeDef HAL_SAI_DMAStop(SAI_HandleTypeDef *hsai); - -/* Abort function */ -HAL_StatusTypeDef HAL_SAI_Abort(SAI_HandleTypeDef *hsai); - -/* Mute management */ -HAL_StatusTypeDef HAL_SAI_EnableTxMuteMode(SAI_HandleTypeDef *hsai, uint16_t val); -HAL_StatusTypeDef HAL_SAI_DisableTxMuteMode(SAI_HandleTypeDef *hsai); -HAL_StatusTypeDef HAL_SAI_EnableRxMuteMode(SAI_HandleTypeDef *hsai, SAIcallback callback, uint16_t counter); -HAL_StatusTypeDef HAL_SAI_DisableRxMuteMode(SAI_HandleTypeDef *hsai); - -/* SAI IRQHandler and Callbacks used in non blocking modes (Interrupt and DMA) */ -void HAL_SAI_IRQHandler(SAI_HandleTypeDef *hsai); -void HAL_SAI_TxHalfCpltCallback(SAI_HandleTypeDef *hsai); -void HAL_SAI_TxCpltCallback(SAI_HandleTypeDef *hsai); -void HAL_SAI_RxHalfCpltCallback(SAI_HandleTypeDef *hsai); -void HAL_SAI_RxCpltCallback(SAI_HandleTypeDef *hsai); -void HAL_SAI_ErrorCallback(SAI_HandleTypeDef *hsai); -/** - * @} - */ - -/** @addtogroup SAI_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State functions **************************************************/ -HAL_SAI_StateTypeDef HAL_SAI_GetState(SAI_HandleTypeDef *hsai); -uint32_t HAL_SAI_GetError(SAI_HandleTypeDef *hsai); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/** @defgroup SAI_Private_Types SAI Private Types - * @{ - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup SAI_Private_Variables SAI Private Variables - * @{ - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup SAI_Private_Constants SAI Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @addtogroup SAI_Private_Macros - * @{ - */ -#define IS_SAI_BLOCK_SYNCEXT(STATE) (((STATE) == SAI_SYNCEXT_DISABLE) ||\ - ((STATE) == SAI_SYNCEXT_IN_ENABLE) ||\ - ((STATE) == SAI_SYNCEXT_OUTBLOCKA_ENABLE) ||\ - ((STATE) == SAI_SYNCEXT_OUTBLOCKB_ENABLE)) - -#define IS_SAI_SUPPORTED_PROTOCOL(PROTOCOL) (((PROTOCOL) == SAI_I2S_STANDARD) ||\ - ((PROTOCOL) == SAI_I2S_MSBJUSTIFIED) ||\ - ((PROTOCOL) == SAI_I2S_LSBJUSTIFIED) ||\ - ((PROTOCOL) == SAI_PCM_LONG) ||\ - ((PROTOCOL) == SAI_PCM_SHORT)) - -#define IS_SAI_PROTOCOL_DATASIZE(DATASIZE) (((DATASIZE) == SAI_PROTOCOL_DATASIZE_16BIT) ||\ - ((DATASIZE) == SAI_PROTOCOL_DATASIZE_16BITEXTENDED) ||\ - ((DATASIZE) == SAI_PROTOCOL_DATASIZE_24BIT) ||\ - ((DATASIZE) == SAI_PROTOCOL_DATASIZE_32BIT)) - -#define IS_SAI_CLK_SOURCE(SOURCE) (((SOURCE) == SAI_CLKSOURCE_PLLSAI) ||\ - ((SOURCE) == SAI_CLKSOURCE_PLLI2S) ||\ - ((SOURCE) == SAI_CLKSOURCE_EXT)) - -#define IS_SAI_AUDIO_FREQUENCY(AUDIO) (((AUDIO) == SAI_AUDIO_FREQUENCY_192K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_96K) || \ - ((AUDIO) == SAI_AUDIO_FREQUENCY_48K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_44K) || \ - ((AUDIO) == SAI_AUDIO_FREQUENCY_32K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_22K) || \ - ((AUDIO) == SAI_AUDIO_FREQUENCY_16K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_11K) || \ - ((AUDIO) == SAI_AUDIO_FREQUENCY_8K) || ((AUDIO) == SAI_AUDIO_FREQUENCY_MCKDIV)) - -#define IS_SAI_BLOCK_MODE(MODE) (((MODE) == SAI_MODEMASTER_TX) || \ - ((MODE) == SAI_MODEMASTER_RX) || \ - ((MODE) == SAI_MODESLAVE_TX) || \ - ((MODE) == SAI_MODESLAVE_RX)) - -#define IS_SAI_BLOCK_PROTOCOL(PROTOCOL) (((PROTOCOL) == SAI_FREE_PROTOCOL) || \ - ((PROTOCOL) == SAI_AC97_PROTOCOL) || \ - ((PROTOCOL) == SAI_SPDIF_PROTOCOL)) - -#define IS_SAI_BLOCK_DATASIZE(DATASIZE) (((DATASIZE) == SAI_DATASIZE_8) || \ - ((DATASIZE) == SAI_DATASIZE_10) || \ - ((DATASIZE) == SAI_DATASIZE_16) || \ - ((DATASIZE) == SAI_DATASIZE_20) || \ - ((DATASIZE) == SAI_DATASIZE_24) || \ - ((DATASIZE) == SAI_DATASIZE_32)) - -#define IS_SAI_BLOCK_FIRST_BIT(BIT) (((BIT) == SAI_FIRSTBIT_MSB) || \ - ((BIT) == SAI_FIRSTBIT_LSB)) - -#define IS_SAI_BLOCK_CLOCK_STROBING(CLOCK) (((CLOCK) == SAI_CLOCKSTROBING_FALLINGEDGE) || \ - ((CLOCK) == SAI_CLOCKSTROBING_RISINGEDGE)) - -#define IS_SAI_BLOCK_SYNCHRO(SYNCHRO) (((SYNCHRO) == SAI_ASYNCHRONOUS) || \ - ((SYNCHRO) == SAI_SYNCHRONOUS) || \ - ((SYNCHRO) == SAI_SYNCHRONOUS_EXT)) - -#define IS_SAI_BLOCK_OUTPUT_DRIVE(DRIVE) (((DRIVE) == SAI_OUTPUTDRIVE_DISABLE) || \ - ((DRIVE) == SAI_OUTPUTDRIVE_ENABLE)) - -#define IS_SAI_BLOCK_NODIVIDER(NODIVIDER) (((NODIVIDER) == SAI_MASTERDIVIDER_ENABLE) || \ - ((NODIVIDER) == SAI_MASTERDIVIDER_DISABLE)) - -#define IS_SAI_BLOCK_FIFO_STATUS(STATUS) (((STATUS) == SAI_FIFOSTATUS_LESS1QUARTERFULL ) || \ - ((STATUS) == SAI_FIFOSTATUS_HALFFULL) || \ - ((STATUS) == SAI_FIFOSTATUS_1QUARTERFULL) || \ - ((STATUS) == SAI_FIFOSTATUS_3QUARTERFULL) || \ - ((STATUS) == SAI_FIFOSTATUS_FULL) || \ - ((STATUS) == SAI_FIFOSTATUS_EMPTY)) - -#define IS_SAI_BLOCK_MUTE_COUNTER(COUNTER) ((COUNTER) <= 63) - -#define IS_SAI_BLOCK_MUTE_VALUE(VALUE) (((VALUE) == SAI_ZERO_VALUE) || \ - ((VALUE) == SAI_LAST_SENT_VALUE)) - -#define IS_SAI_BLOCK_COMPANDING_MODE(MODE) (((MODE) == SAI_NOCOMPANDING) || \ - ((MODE) == SAI_ULAW_1CPL_COMPANDING) || \ - ((MODE) == SAI_ALAW_1CPL_COMPANDING) || \ - ((MODE) == SAI_ULAW_2CPL_COMPANDING) || \ - ((MODE) == SAI_ALAW_2CPL_COMPANDING)) - -#define IS_SAI_BLOCK_FIFO_THRESHOLD(THRESHOLD) (((THRESHOLD) == SAI_FIFOTHRESHOLD_EMPTY) || \ - ((THRESHOLD) == SAI_FIFOTHRESHOLD_1QF) || \ - ((THRESHOLD) == SAI_FIFOTHRESHOLD_HF) || \ - ((THRESHOLD) == SAI_FIFOTHRESHOLD_3QF) || \ - ((THRESHOLD) == SAI_FIFOTHRESHOLD_FULL)) - -#define IS_SAI_BLOCK_TRISTATE_MANAGEMENT(STATE) (((STATE) == SAI_OUTPUT_NOTRELEASED) ||\ - ((STATE) == SAI_OUTPUT_RELEASED)) - -#define IS_SAI_MONO_STEREO_MODE(MODE) (((MODE) == SAI_MONOMODE) ||\ - ((MODE) == SAI_STEREOMODE)) - -#define IS_SAI_SLOT_ACTIVE(ACTIVE) ((((ACTIVE) >> 16 ) > 0) && (((ACTIVE) >> 16 ) <= (SAI_SLOTACTIVE_ALL >> 16))) - -#define IS_SAI_BLOCK_SLOT_NUMBER(NUMBER) ((1 <= (NUMBER)) && ((NUMBER) <= 16)) - -#define IS_SAI_BLOCK_SLOT_SIZE(SIZE) (((SIZE) == SAI_SLOTSIZE_DATASIZE) || \ - ((SIZE) == SAI_SLOTSIZE_16B) || \ - ((SIZE) == SAI_SLOTSIZE_32B)) - -#define IS_SAI_BLOCK_FIRSTBIT_OFFSET(OFFSET) ((OFFSET) <= 24) - -#define IS_SAI_BLOCK_FS_OFFSET(OFFSET) (((OFFSET) == SAI_FS_FIRSTBIT) || \ - ((OFFSET) == SAI_FS_BEFOREFIRSTBIT)) - -#define IS_SAI_BLOCK_FS_POLARITY(POLARITY) (((POLARITY) == SAI_FS_ACTIVE_LOW) || \ - ((POLARITY) == SAI_FS_ACTIVE_HIGH)) - -#define IS_SAI_BLOCK_FS_DEFINITION(DEFINITION) (((DEFINITION) == SAI_FS_STARTFRAME) || \ - ((DEFINITION) == SAI_FS_CHANNEL_IDENTIFICATION)) - -#define IS_SAI_BLOCK_MASTER_DIVIDER(DIVIDER) ((DIVIDER) <= 15) - -#define IS_SAI_BLOCK_FRAME_LENGTH(LENGTH) ((8 <= (LENGTH)) && ((LENGTH) <= 256)) - -#define IS_SAI_BLOCK_ACTIVE_FRAME(LENGTH) ((1 <= (LENGTH)) && ((LENGTH) <= 128)) - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup SAI_Private_Functions SAI Private Functions - * @{ - */ - -/** - * @} - */ - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */ -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_SAI_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sai_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sai_ex.h deleted file mode 100644 index 0fd2fa8..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sai_ex.h +++ /dev/null @@ -1,101 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_sai_ex.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of SAI Extension HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_SAI_EX_H -#define __STM32F4xx_HAL_SAI_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup SAIEx - * @{ - */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) - -/* Exported types ------------------------------------------------------------*/ -/* Exported constants --------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup SAIEx_Exported_Functions - * @{ - */ - -/** @addtogroup SAIEx_Exported_Functions_Group1 - * @{ - */ - -/* Extended features functions ************************************************/ -void SAI_BlockSynchroConfig(SAI_HandleTypeDef *hsai); -uint32_t SAI_GetInputClock(SAI_HandleTypeDef *hsai); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */ -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_SAI_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h deleted file mode 100644 index 61a406e..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sd.h +++ /dev/null @@ -1,789 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_sd.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of SD HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_SD_H -#define __STM32F4xx_HAL_SD_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_sdmmc.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @defgroup SD SD - * @brief SD HAL module driver - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup SD_Exported_Types SD Exported Types - * @{ - */ - -/** @defgroup SD_Exported_Types_Group1 SD Handle Structure definition - * @{ - */ -#define SD_InitTypeDef SDIO_InitTypeDef -#define SD_TypeDef SDIO_TypeDef - -typedef struct -{ - SD_TypeDef *Instance; /*!< SDIO register base address */ - - SD_InitTypeDef Init; /*!< SD required parameters */ - - HAL_LockTypeDef Lock; /*!< SD locking object */ - - uint32_t CardType; /*!< SD card type */ - - uint32_t RCA; /*!< SD relative card address */ - - uint32_t CSD[4]; /*!< SD card specific data table */ - - uint32_t CID[4]; /*!< SD card identification number table */ - - __IO uint32_t SdTransferCplt; /*!< SD transfer complete flag in non blocking mode */ - - __IO uint32_t SdTransferErr; /*!< SD transfer error flag in non blocking mode */ - - __IO uint32_t DmaTransferCplt; /*!< SD DMA transfer complete flag */ - - __IO uint32_t SdOperation; /*!< SD transfer operation (read/write) */ - - DMA_HandleTypeDef *hdmarx; /*!< SD Rx DMA handle parameters */ - - DMA_HandleTypeDef *hdmatx; /*!< SD Tx DMA handle parameters */ - -}SD_HandleTypeDef; -/** - * @} - */ - -/** @defgroup SD_Exported_Types_Group2 Card Specific Data: CSD Register - * @{ - */ -typedef struct -{ - __IO uint8_t CSDStruct; /*!< CSD structure */ - __IO uint8_t SysSpecVersion; /*!< System specification version */ - __IO uint8_t Reserved1; /*!< Reserved */ - __IO uint8_t TAAC; /*!< Data read access time 1 */ - __IO uint8_t NSAC; /*!< Data read access time 2 in CLK cycles */ - __IO uint8_t MaxBusClkFrec; /*!< Max. bus clock frequency */ - __IO uint16_t CardComdClasses; /*!< Card command classes */ - __IO uint8_t RdBlockLen; /*!< Max. read data block length */ - __IO uint8_t PartBlockRead; /*!< Partial blocks for read allowed */ - __IO uint8_t WrBlockMisalign; /*!< Write block misalignment */ - __IO uint8_t RdBlockMisalign; /*!< Read block misalignment */ - __IO uint8_t DSRImpl; /*!< DSR implemented */ - __IO uint8_t Reserved2; /*!< Reserved */ - __IO uint32_t DeviceSize; /*!< Device Size */ - __IO uint8_t MaxRdCurrentVDDMin; /*!< Max. read current @ VDD min */ - __IO uint8_t MaxRdCurrentVDDMax; /*!< Max. read current @ VDD max */ - __IO uint8_t MaxWrCurrentVDDMin; /*!< Max. write current @ VDD min */ - __IO uint8_t MaxWrCurrentVDDMax; /*!< Max. write current @ VDD max */ - __IO uint8_t DeviceSizeMul; /*!< Device size multiplier */ - __IO uint8_t EraseGrSize; /*!< Erase group size */ - __IO uint8_t EraseGrMul; /*!< Erase group size multiplier */ - __IO uint8_t WrProtectGrSize; /*!< Write protect group size */ - __IO uint8_t WrProtectGrEnable; /*!< Write protect group enable */ - __IO uint8_t ManDeflECC; /*!< Manufacturer default ECC */ - __IO uint8_t WrSpeedFact; /*!< Write speed factor */ - __IO uint8_t MaxWrBlockLen; /*!< Max. write data block length */ - __IO uint8_t WriteBlockPaPartial; /*!< Partial blocks for write allowed */ - __IO uint8_t Reserved3; /*!< Reserved */ - __IO uint8_t ContentProtectAppli; /*!< Content protection application */ - __IO uint8_t FileFormatGrouop; /*!< File format group */ - __IO uint8_t CopyFlag; /*!< Copy flag (OTP) */ - __IO uint8_t PermWrProtect; /*!< Permanent write protection */ - __IO uint8_t TempWrProtect; /*!< Temporary write protection */ - __IO uint8_t FileFormat; /*!< File format */ - __IO uint8_t ECC; /*!< ECC code */ - __IO uint8_t CSD_CRC; /*!< CSD CRC */ - __IO uint8_t Reserved4; /*!< Always 1 */ - -}HAL_SD_CSDTypedef; -/** - * @} - */ - -/** @defgroup SD_Exported_Types_Group3 Card Identification Data: CID Register - * @{ - */ -typedef struct -{ - __IO uint8_t ManufacturerID; /*!< Manufacturer ID */ - __IO uint16_t OEM_AppliID; /*!< OEM/Application ID */ - __IO uint32_t ProdName1; /*!< Product Name part1 */ - __IO uint8_t ProdName2; /*!< Product Name part2 */ - __IO uint8_t ProdRev; /*!< Product Revision */ - __IO uint32_t ProdSN; /*!< Product Serial Number */ - __IO uint8_t Reserved1; /*!< Reserved1 */ - __IO uint16_t ManufactDate; /*!< Manufacturing Date */ - __IO uint8_t CID_CRC; /*!< CID CRC */ - __IO uint8_t Reserved2; /*!< Always 1 */ - -}HAL_SD_CIDTypedef; -/** - * @} - */ - -/** @defgroup SD_Exported_Types_Group4 SD Card Status returned by ACMD13 - * @{ - */ -typedef struct -{ - __IO uint8_t DAT_BUS_WIDTH; /*!< Shows the currently defined data bus width */ - __IO uint8_t SECURED_MODE; /*!< Card is in secured mode of operation */ - __IO uint16_t SD_CARD_TYPE; /*!< Carries information about card type */ - __IO uint32_t SIZE_OF_PROTECTED_AREA; /*!< Carries information about the capacity of protected area */ - __IO uint8_t SPEED_CLASS; /*!< Carries information about the speed class of the card */ - __IO uint8_t PERFORMANCE_MOVE; /*!< Carries information about the card's performance move */ - __IO uint8_t AU_SIZE; /*!< Carries information about the card's allocation unit size */ - __IO uint16_t ERASE_SIZE; /*!< Determines the number of AUs to be erased in one operation */ - __IO uint8_t ERASE_TIMEOUT; /*!< Determines the timeout for any number of AU erase */ - __IO uint8_t ERASE_OFFSET; /*!< Carries information about the erase offset */ - -}HAL_SD_CardStatusTypedef; -/** - * @} - */ - -/** @defgroup SD_Exported_Types_Group5 SD Card information structure - * @{ - */ -typedef struct -{ - HAL_SD_CSDTypedef SD_csd; /*!< SD card specific data register */ - HAL_SD_CIDTypedef SD_cid; /*!< SD card identification number register */ - uint64_t CardCapacity; /*!< Card capacity */ - uint32_t CardBlockSize; /*!< Card block size */ - uint16_t RCA; /*!< SD relative card address */ - uint8_t CardType; /*!< SD card type */ - -}HAL_SD_CardInfoTypedef; -/** - * @} - */ - -/** @defgroup SD_Exported_Types_Group6 SD Error status enumeration Structure definition - * @{ - */ -typedef enum -{ -/** - * @brief SD specific error defines - */ - SD_CMD_CRC_FAIL = (1), /*!< Command response received (but CRC check failed) */ - SD_DATA_CRC_FAIL = (2), /*!< Data block sent/received (CRC check failed) */ - SD_CMD_RSP_TIMEOUT = (3), /*!< Command response timeout */ - SD_DATA_TIMEOUT = (4), /*!< Data timeout */ - SD_TX_UNDERRUN = (5), /*!< Transmit FIFO underrun */ - SD_RX_OVERRUN = (6), /*!< Receive FIFO overrun */ - SD_START_BIT_ERR = (7), /*!< Start bit not detected on all data signals in wide bus mode */ - SD_CMD_OUT_OF_RANGE = (8), /*!< Command's argument was out of range. */ - SD_ADDR_MISALIGNED = (9), /*!< Misaligned address */ - SD_BLOCK_LEN_ERR = (10), /*!< Transferred block length is not allowed for the card or the number of transferred bytes does not match the block length */ - SD_ERASE_SEQ_ERR = (11), /*!< An error in the sequence of erase command occurs. */ - SD_BAD_ERASE_PARAM = (12), /*!< An invalid selection for erase groups */ - SD_WRITE_PROT_VIOLATION = (13), /*!< Attempt to program a write protect block */ - SD_LOCK_UNLOCK_FAILED = (14), /*!< Sequence or password error has been detected in unlock command or if there was an attempt to access a locked card */ - SD_COM_CRC_FAILED = (15), /*!< CRC check of the previous command failed */ - SD_ILLEGAL_CMD = (16), /*!< Command is not legal for the card state */ - SD_CARD_ECC_FAILED = (17), /*!< Card internal ECC was applied but failed to correct the data */ - SD_CC_ERROR = (18), /*!< Internal card controller error */ - SD_GENERAL_UNKNOWN_ERROR = (19), /*!< General or unknown error */ - SD_STREAM_READ_UNDERRUN = (20), /*!< The card could not sustain data transfer in stream read operation. */ - SD_STREAM_WRITE_OVERRUN = (21), /*!< The card could not sustain data programming in stream mode */ - SD_CID_CSD_OVERWRITE = (22), /*!< CID/CSD overwrite error */ - SD_WP_ERASE_SKIP = (23), /*!< Only partial address space was erased */ - SD_CARD_ECC_DISABLED = (24), /*!< Command has been executed without using internal ECC */ - SD_ERASE_RESET = (25), /*!< Erase sequence was cleared before executing because an out of erase sequence command was received */ - SD_AKE_SEQ_ERROR = (26), /*!< Error in sequence of authentication. */ - SD_INVALID_VOLTRANGE = (27), - SD_ADDR_OUT_OF_RANGE = (28), - SD_SWITCH_ERROR = (29), - SD_SDIO_DISABLED = (30), - SD_SDIO_FUNCTION_BUSY = (31), - SD_SDIO_FUNCTION_FAILED = (32), - SD_SDIO_UNKNOWN_FUNCTION = (33), - -/** - * @brief Standard error defines - */ - SD_INTERNAL_ERROR = (34), - SD_NOT_CONFIGURED = (35), - SD_REQUEST_PENDING = (36), - SD_REQUEST_NOT_APPLICABLE = (37), - SD_INVALID_PARAMETER = (38), - SD_UNSUPPORTED_FEATURE = (39), - SD_UNSUPPORTED_HW = (40), - SD_ERROR = (41), - SD_OK = (0) - -}HAL_SD_ErrorTypedef; -/** - * @} - */ - -/** @defgroup SD_Exported_Types_Group7 SD Transfer state enumeration structure - * @{ - */ -typedef enum -{ - SD_TRANSFER_OK = 0, /*!< Transfer success */ - SD_TRANSFER_BUSY = 1, /*!< Transfer is occurring */ - SD_TRANSFER_ERROR = 2 /*!< Transfer failed */ - -}HAL_SD_TransferStateTypedef; -/** - * @} - */ - -/** @defgroup SD_Exported_Types_Group8 SD Card State enumeration structure - * @{ - */ -typedef enum -{ - SD_CARD_READY = ((uint32_t)0x00000001), /*!< Card state is ready */ - SD_CARD_IDENTIFICATION = ((uint32_t)0x00000002), /*!< Card is in identification state */ - SD_CARD_STANDBY = ((uint32_t)0x00000003), /*!< Card is in standby state */ - SD_CARD_TRANSFER = ((uint32_t)0x00000004), /*!< Card is in transfer state */ - SD_CARD_SENDING = ((uint32_t)0x00000005), /*!< Card is sending an operation */ - SD_CARD_RECEIVING = ((uint32_t)0x00000006), /*!< Card is receiving operation information */ - SD_CARD_PROGRAMMING = ((uint32_t)0x00000007), /*!< Card is in programming state */ - SD_CARD_DISCONNECTED = ((uint32_t)0x00000008), /*!< Card is disconnected */ - SD_CARD_ERROR = ((uint32_t)0x000000FF) /*!< Card is in error state */ - -}HAL_SD_CardStateTypedef; -/** - * @} - */ - -/** @defgroup SD_Exported_Types_Group9 SD Operation enumeration structure - * @{ - */ -typedef enum -{ - SD_READ_SINGLE_BLOCK = 0, /*!< Read single block operation */ - SD_READ_MULTIPLE_BLOCK = 1, /*!< Read multiple blocks operation */ - SD_WRITE_SINGLE_BLOCK = 2, /*!< Write single block operation */ - SD_WRITE_MULTIPLE_BLOCK = 3 /*!< Write multiple blocks operation */ - -}HAL_SD_OperationTypedef; -/** - * @} - */ - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup SD_Exported_Constants SD Exported Constants - * @{ - */ - -/** - * @brief SD Commands Index - */ -#define SD_CMD_GO_IDLE_STATE ((uint8_t)0) /*!< Resets the SD memory card. */ -#define SD_CMD_SEND_OP_COND ((uint8_t)1) /*!< Sends host capacity support information and activates the card's initialization process. */ -#define SD_CMD_ALL_SEND_CID ((uint8_t)2) /*!< Asks any card connected to the host to send the CID numbers on the CMD line. */ -#define SD_CMD_SET_REL_ADDR ((uint8_t)3) /*!< Asks the card to publish a new relative address (RCA). */ -#define SD_CMD_SET_DSR ((uint8_t)4) /*!< Programs the DSR of all cards. */ -#define SD_CMD_SDIO_SEN_OP_COND ((uint8_t)5) /*!< Sends host capacity support information (HCS) and asks the accessed card to send its - operating condition register (OCR) content in the response on the CMD line. */ -#define SD_CMD_HS_SWITCH ((uint8_t)6) /*!< Checks switchable function (mode 0) and switch card function (mode 1). */ -#define SD_CMD_SEL_DESEL_CARD ((uint8_t)7) /*!< Selects the card by its own relative address and gets deselected by any other address */ -#define SD_CMD_HS_SEND_EXT_CSD ((uint8_t)8) /*!< Sends SD Memory Card interface condition, which includes host supply voltage information - and asks the card whether card supports voltage. */ -#define SD_CMD_SEND_CSD ((uint8_t)9) /*!< Addressed card sends its card specific data (CSD) on the CMD line. */ -#define SD_CMD_SEND_CID ((uint8_t)10) /*!< Addressed card sends its card identification (CID) on the CMD line. */ -#define SD_CMD_READ_DAT_UNTIL_STOP ((uint8_t)11) /*!< SD card doesn't support it. */ -#define SD_CMD_STOP_TRANSMISSION ((uint8_t)12) /*!< Forces the card to stop transmission. */ -#define SD_CMD_SEND_STATUS ((uint8_t)13) /*!< Addressed card sends its status register. */ -#define SD_CMD_HS_BUSTEST_READ ((uint8_t)14) -#define SD_CMD_GO_INACTIVE_STATE ((uint8_t)15) /*!< Sends an addressed card into the inactive state. */ -#define SD_CMD_SET_BLOCKLEN ((uint8_t)16) /*!< Sets the block length (in bytes for SDSC) for all following block commands - (read, write, lock). Default block length is fixed to 512 Bytes. Not effective - for SDHS and SDXC. */ -#define SD_CMD_READ_SINGLE_BLOCK ((uint8_t)17) /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of - fixed 512 bytes in case of SDHC and SDXC. */ -#define SD_CMD_READ_MULT_BLOCK ((uint8_t)18) /*!< Continuously transfers data blocks from card to host until interrupted by - STOP_TRANSMISSION command. */ -#define SD_CMD_HS_BUSTEST_WRITE ((uint8_t)19) /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104. */ -#define SD_CMD_WRITE_DAT_UNTIL_STOP ((uint8_t)20) /*!< Speed class control command. */ -#define SD_CMD_SET_BLOCK_COUNT ((uint8_t)23) /*!< Specify block count for CMD18 and CMD25. */ -#define SD_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24) /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of - fixed 512 bytes in case of SDHC and SDXC. */ -#define SD_CMD_WRITE_MULT_BLOCK ((uint8_t)25) /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows. */ -#define SD_CMD_PROG_CID ((uint8_t)26) /*!< Reserved for manufacturers. */ -#define SD_CMD_PROG_CSD ((uint8_t)27) /*!< Programming of the programmable bits of the CSD. */ -#define SD_CMD_SET_WRITE_PROT ((uint8_t)28) /*!< Sets the write protection bit of the addressed group. */ -#define SD_CMD_CLR_WRITE_PROT ((uint8_t)29) /*!< Clears the write protection bit of the addressed group. */ -#define SD_CMD_SEND_WRITE_PROT ((uint8_t)30) /*!< Asks the card to send the status of the write protection bits. */ -#define SD_CMD_SD_ERASE_GRP_START ((uint8_t)32) /*!< Sets the address of the first write block to be erased. (For SD card only). */ -#define SD_CMD_SD_ERASE_GRP_END ((uint8_t)33) /*!< Sets the address of the last write block of the continuous range to be erased. */ -#define SD_CMD_ERASE_GRP_START ((uint8_t)35) /*!< Sets the address of the first write block to be erased. Reserved for each command - system set by switch function command (CMD6). */ -#define SD_CMD_ERASE_GRP_END ((uint8_t)36) /*!< Sets the address of the last write block of the continuous range to be erased. - Reserved for each command system set by switch function command (CMD6). */ -#define SD_CMD_ERASE ((uint8_t)38) /*!< Reserved for SD security applications. */ -#define SD_CMD_FAST_IO ((uint8_t)39) /*!< SD card doesn't support it (Reserved). */ -#define SD_CMD_GO_IRQ_STATE ((uint8_t)40) /*!< SD card doesn't support it (Reserved). */ -#define SD_CMD_LOCK_UNLOCK ((uint8_t)42) /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by - the SET_BLOCK_LEN command. */ -#define SD_CMD_APP_CMD ((uint8_t)55) /*!< Indicates to the card that the next command is an application specific command rather - than a standard command. */ -#define SD_CMD_GEN_CMD ((uint8_t)56) /*!< Used either to transfer a data block to the card or to get a data block from the card - for general purpose/application specific commands. */ -#define SD_CMD_NO_CMD ((uint8_t)64) - -/** - * @brief Following commands are SD Card Specific commands. - * SDIO_APP_CMD should be sent before sending these commands. - */ -#define SD_CMD_APP_SD_SET_BUSWIDTH ((uint8_t)6) /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus - widths are given in SCR register. */ -#define SD_CMD_SD_APP_STATUS ((uint8_t)13) /*!< (ACMD13) Sends the SD status. */ -#define SD_CMD_SD_APP_SEND_NUM_WRITE_BLOCKS ((uint8_t)22) /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with - 32bit+CRC data block. */ -#define SD_CMD_SD_APP_OP_COND ((uint8_t)41) /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to - send its operating condition register (OCR) content in the response on the CMD line. */ -#define SD_CMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42) /*!< (ACMD42) Connects/Disconnects the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card. */ -#define SD_CMD_SD_APP_SEND_SCR ((uint8_t)51) /*!< Reads the SD Configuration Register (SCR). */ -#define SD_CMD_SDIO_RW_DIRECT ((uint8_t)52) /*!< For SD I/O card only, reserved for security specification. */ -#define SD_CMD_SDIO_RW_EXTENDED ((uint8_t)53) /*!< For SD I/O card only, reserved for security specification. */ - -/** - * @brief Following commands are SD Card Specific security commands. - * SD_CMD_APP_CMD should be sent before sending these commands. - */ -#define SD_CMD_SD_APP_GET_MKB ((uint8_t)43) /*!< For SD card only */ -#define SD_CMD_SD_APP_GET_MID ((uint8_t)44) /*!< For SD card only */ -#define SD_CMD_SD_APP_SET_CER_RN1 ((uint8_t)45) /*!< For SD card only */ -#define SD_CMD_SD_APP_GET_CER_RN2 ((uint8_t)46) /*!< For SD card only */ -#define SD_CMD_SD_APP_SET_CER_RES2 ((uint8_t)47) /*!< For SD card only */ -#define SD_CMD_SD_APP_GET_CER_RES1 ((uint8_t)48) /*!< For SD card only */ -#define SD_CMD_SD_APP_SECURE_READ_MULTIPLE_BLOCK ((uint8_t)18) /*!< For SD card only */ -#define SD_CMD_SD_APP_SECURE_WRITE_MULTIPLE_BLOCK ((uint8_t)25) /*!< For SD card only */ -#define SD_CMD_SD_APP_SECURE_ERASE ((uint8_t)38) /*!< For SD card only */ -#define SD_CMD_SD_APP_CHANGE_SECURE_AREA ((uint8_t)49) /*!< For SD card only */ -#define SD_CMD_SD_APP_SECURE_WRITE_MKB ((uint8_t)48) /*!< For SD card only */ - -/** - * @brief Supported SD Memory Cards - */ -#define STD_CAPACITY_SD_CARD_V1_1 ((uint32_t)0x00000000) -#define STD_CAPACITY_SD_CARD_V2_0 ((uint32_t)0x00000001) -#define HIGH_CAPACITY_SD_CARD ((uint32_t)0x00000002) -#define MULTIMEDIA_CARD ((uint32_t)0x00000003) -#define SECURE_DIGITAL_IO_CARD ((uint32_t)0x00000004) -#define HIGH_SPEED_MULTIMEDIA_CARD ((uint32_t)0x00000005) -#define SECURE_DIGITAL_IO_COMBO_CARD ((uint32_t)0x00000006) -#define HIGH_CAPACITY_MMC_CARD ((uint32_t)0x00000007) -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup SD_Exported_macros SD Exported Macros - * @brief macros to handle interrupts and specific clock configurations - * @{ - */ - -/** - * @brief Enable the SD device. - * @retval None - */ -#define __HAL_SD_SDIO_ENABLE() __SDIO_ENABLE() - -/** - * @brief Disable the SD device. - * @retval None - */ -#define __HAL_SD_SDIO_DISABLE() __SDIO_DISABLE() - -/** - * @brief Enable the SDIO DMA transfer. - * @retval None - */ -#define __HAL_SD_SDIO_DMA_ENABLE() __SDIO_DMA_ENABLE() - -/** - * @brief Disable the SDIO DMA transfer. - * @retval None - */ -#define __HAL_SD_SDIO_DMA_DISABLE() __SDIO_DMA_DISABLE() - -/** - * @brief Enable the SD device interrupt. - * @param __HANDLE__: SD Handle - * @param __INTERRUPT__: specifies the SDIO interrupt sources to be enabled. - * This parameter can be one or a combination of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt - * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide - * bus mode interrupt - * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt - * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt - * @arg SDIO_IT_TXACT: Data transmit in progress interrupt - * @arg SDIO_IT_RXACT: Data receive in progress interrupt - * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt - * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt - * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt - * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt - * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt - * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt - * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt - * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt - * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt - * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt - * @retval None - */ -#define __HAL_SD_SDIO_ENABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_ENABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) - -/** - * @brief Disable the SD device interrupt. - * @param __HANDLE__: SD Handle - * @param __INTERRUPT__: specifies the SDIO interrupt sources to be disabled. - * This parameter can be one or a combination of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt - * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide - * bus mode interrupt - * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt - * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt - * @arg SDIO_IT_TXACT: Data transmit in progress interrupt - * @arg SDIO_IT_RXACT: Data receive in progress interrupt - * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt - * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt - * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt - * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt - * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt - * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt - * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt - * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt - * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt - * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt - * @retval None - */ -#define __HAL_SD_SDIO_DISABLE_IT(__HANDLE__, __INTERRUPT__) __SDIO_DISABLE_IT((__HANDLE__)->Instance, (__INTERRUPT__)) - -/** - * @brief Check whether the specified SD flag is set or not. - * @param __HANDLE__: SD Handle - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) - * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) - * @arg SDIO_FLAG_CTIMEOUT: Command response timeout - * @arg SDIO_FLAG_DTIMEOUT: Data timeout - * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error - * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error - * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) - * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) - * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) - * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode. - * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) - * @arg SDIO_FLAG_CMDACT: Command transfer in progress - * @arg SDIO_FLAG_TXACT: Data transmit in progress - * @arg SDIO_FLAG_RXACT: Data receive in progress - * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty - * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full - * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full - * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full - * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty - * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty - * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO - * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO - * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received - * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 - * @retval The new state of SD FLAG (SET or RESET). - */ -#define __HAL_SD_SDIO_GET_FLAG(__HANDLE__, __FLAG__) __SDIO_GET_FLAG((__HANDLE__)->Instance, (__FLAG__)) - -/** - * @brief Clear the SD's pending flags. - * @param __HANDLE__: SD Handle - * @param __FLAG__: specifies the flag to clear. - * This parameter can be one or a combination of the following values: - * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) - * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) - * @arg SDIO_FLAG_CTIMEOUT: Command response timeout - * @arg SDIO_FLAG_DTIMEOUT: Data timeout - * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error - * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error - * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) - * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) - * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) - * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode - * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) - * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received - * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 - * @retval None - */ -#define __HAL_SD_SDIO_CLEAR_FLAG(__HANDLE__, __FLAG__) __SDIO_CLEAR_FLAG((__HANDLE__)->Instance, (__FLAG__)) - -/** - * @brief Check whether the specified SD interrupt has occurred or not. - * @param __HANDLE__: SD Handle - * @param __INTERRUPT__: specifies the SDIO interrupt source to check. - * This parameter can be one of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt - * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide - * bus mode interrupt - * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt - * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt - * @arg SDIO_IT_TXACT: Data transmit in progress interrupt - * @arg SDIO_IT_RXACT: Data receive in progress interrupt - * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt - * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt - * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt - * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt - * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt - * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt - * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt - * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt - * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt - * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt - * @retval The new state of SD IT (SET or RESET). - */ -#define __HAL_SD_SDIO_GET_IT (__HANDLE__, __INTERRUPT__) __SDIO_GET_IT ((__HANDLE__)->Instance, __INTERRUPT__) - -/** - * @brief Clear the SD's interrupt pending bits. - * @param __HANDLE__ : SD Handle - * @param __INTERRUPT__: specifies the interrupt pending bit to clear. - * This parameter can be one or a combination of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt - * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide - * bus mode interrupt - * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt - * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 - * @retval None - */ -#define __HAL_SD_SDIO_CLEAR_IT(__HANDLE__, __INTERRUPT__) __SDIO_CLEAR_IT((__HANDLE__)->Instance, (__INTERRUPT__)) -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @defgroup SD_Exported_Functions SD Exported Functions - * @{ - */ - -/** @defgroup SD_Exported_Functions_Group1 Initialization and de-initialization functions - * @{ - */ -HAL_SD_ErrorTypedef HAL_SD_Init(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *SDCardInfo); -HAL_StatusTypeDef HAL_SD_DeInit (SD_HandleTypeDef *hsd); -void HAL_SD_MspInit(SD_HandleTypeDef *hsd); -void HAL_SD_MspDeInit(SD_HandleTypeDef *hsd); -/** - * @} - */ - -/** @defgroup SD_Exported_Functions_Group2 I/O operation functions - * @{ - */ -/* Blocking mode: Polling */ -HAL_SD_ErrorTypedef HAL_SD_ReadBlocks(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks); -HAL_SD_ErrorTypedef HAL_SD_WriteBlocks(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks); -HAL_SD_ErrorTypedef HAL_SD_Erase(SD_HandleTypeDef *hsd, uint64_t startaddr, uint64_t endaddr); - -/* Non-Blocking mode: Interrupt */ -void HAL_SD_IRQHandler(SD_HandleTypeDef *hsd); - -/* Callback in non blocking modes (DMA) */ -void HAL_SD_DMA_RxCpltCallback(DMA_HandleTypeDef *hdma); -void HAL_SD_DMA_RxErrorCallback(DMA_HandleTypeDef *hdma); -void HAL_SD_DMA_TxCpltCallback(DMA_HandleTypeDef *hdma); -void HAL_SD_DMA_TxErrorCallback(DMA_HandleTypeDef *hdma); -void HAL_SD_XferCpltCallback(SD_HandleTypeDef *hsd); -void HAL_SD_XferErrorCallback(SD_HandleTypeDef *hsd); - -/* Non-Blocking mode: DMA */ -HAL_SD_ErrorTypedef HAL_SD_ReadBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pReadBuffer, uint64_t ReadAddr, uint32_t BlockSize, uint32_t NumberOfBlocks); -HAL_SD_ErrorTypedef HAL_SD_WriteBlocks_DMA(SD_HandleTypeDef *hsd, uint32_t *pWriteBuffer, uint64_t WriteAddr, uint32_t BlockSize, uint32_t NumberOfBlocks); -HAL_SD_ErrorTypedef HAL_SD_CheckWriteOperation(SD_HandleTypeDef *hsd, uint32_t Timeout); -HAL_SD_ErrorTypedef HAL_SD_CheckReadOperation(SD_HandleTypeDef *hsd, uint32_t Timeout); -/** - * @} - */ - -/** @defgroup SD_Exported_Functions_Group3 Peripheral Control functions - * @{ - */ -HAL_SD_ErrorTypedef HAL_SD_Get_CardInfo(SD_HandleTypeDef *hsd, HAL_SD_CardInfoTypedef *pCardInfo); -HAL_SD_ErrorTypedef HAL_SD_WideBusOperation_Config(SD_HandleTypeDef *hsd, uint32_t WideMode); -HAL_SD_ErrorTypedef HAL_SD_StopTransfer(SD_HandleTypeDef *hsd); -HAL_SD_ErrorTypedef HAL_SD_HighSpeed (SD_HandleTypeDef *hsd); -/** - * @} - */ - -/* Peripheral State functions ************************************************/ -/** @defgroup SD_Exported_Functions_Group4 Peripheral State functions - * @{ - */ -HAL_SD_ErrorTypedef HAL_SD_SendSDStatus(SD_HandleTypeDef *hsd, uint32_t *pSDstatus); -HAL_SD_ErrorTypedef HAL_SD_GetCardStatus(SD_HandleTypeDef *hsd, HAL_SD_CardStatusTypedef *pCardStatus); -HAL_SD_TransferStateTypedef HAL_SD_GetStatus(SD_HandleTypeDef *hsd); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/** @defgroup SD_Private_Types SD Private Types - * @{ - */ - -/** - * @} - */ - -/* Private defines -----------------------------------------------------------*/ -/** @defgroup SD_Private_Defines SD Private Defines - * @{ - */ - -/** - * @} - */ - -/* Private variables ---------------------------------------------------------*/ -/** @defgroup SD_Private_Variables SD Private Variables - * @{ - */ - -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup SD_Private_Constants SD Private Constants - * @{ - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup SD_Private_Macros SD Private Macros - * @{ - */ - -/** - * @} - */ - -/* Private functions prototypes ----------------------------------------------*/ -/** @defgroup SD_Private_Functions_Prototypes SD Private Functions Prototypes - * @{ - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup SD_Private_Functions SD Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_SD_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sdram.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sdram.h deleted file mode 100644 index b8f3a75..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sdram.h +++ /dev/null @@ -1,196 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_sdram.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of SDRAM HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_SDRAM_H -#define __STM32F4xx_HAL_SDRAM_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_ll_fmc.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup SDRAM - * @{ - */ - -/* Exported typedef ----------------------------------------------------------*/ -/** @defgroup SDRAM_Exported_Types SDRAM Exported Types - * @{ - */ - -/** - * @brief HAL SDRAM State structure definition - */ -typedef enum -{ - HAL_SDRAM_STATE_RESET = 0x00, /*!< SDRAM not yet initialized or disabled */ - HAL_SDRAM_STATE_READY = 0x01, /*!< SDRAM initialized and ready for use */ - HAL_SDRAM_STATE_BUSY = 0x02, /*!< SDRAM internal process is ongoing */ - HAL_SDRAM_STATE_ERROR = 0x03, /*!< SDRAM error state */ - HAL_SDRAM_STATE_WRITE_PROTECTED = 0x04, /*!< SDRAM device write protected */ - HAL_SDRAM_STATE_PRECHARGED = 0x05 /*!< SDRAM device precharged */ - -}HAL_SDRAM_StateTypeDef; - -/** - * @brief SDRAM handle Structure definition - */ -typedef struct -{ - FMC_SDRAM_TypeDef *Instance; /*!< Register base address */ - - FMC_SDRAM_InitTypeDef Init; /*!< SDRAM device configuration parameters */ - - __IO HAL_SDRAM_StateTypeDef State; /*!< SDRAM access state */ - - HAL_LockTypeDef Lock; /*!< SDRAM locking object */ - - DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */ - -}SDRAM_HandleTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup SDRAM_Exported_Macros SDRAM Exported Macros - * @{ - */ - -/** @brief Reset SDRAM handle state - * @param __HANDLE__: specifies the SDRAM handle. - * @retval None - */ -#define __HAL_SDRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SDRAM_STATE_RESET) -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup SDRAM_Exported_Functions SDRAM Exported Functions - * @{ - */ - -/** @addtogroup SDRAM_Exported_Functions_Group1 - * @{ - */ - -/* Initialization/de-initialization functions *********************************/ -HAL_StatusTypeDef HAL_SDRAM_Init(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_TimingTypeDef *Timing); -HAL_StatusTypeDef HAL_SDRAM_DeInit(SDRAM_HandleTypeDef *hsdram); -void HAL_SDRAM_MspInit(SDRAM_HandleTypeDef *hsdram); -void HAL_SDRAM_MspDeInit(SDRAM_HandleTypeDef *hsdram); - -void HAL_SDRAM_IRQHandler(SDRAM_HandleTypeDef *hsdram); -void HAL_SDRAM_RefreshErrorCallback(SDRAM_HandleTypeDef *hsdram); -void HAL_SDRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma); -void HAL_SDRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma); -/** - * @} - */ - -/** @addtogroup SDRAM_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions ****************************************************/ -HAL_StatusTypeDef HAL_SDRAM_Read_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize); -HAL_StatusTypeDef HAL_SDRAM_Write_8b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize); -HAL_StatusTypeDef HAL_SDRAM_Read_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize); -HAL_StatusTypeDef HAL_SDRAM_Write_16b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize); -HAL_StatusTypeDef HAL_SDRAM_Read_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize); -HAL_StatusTypeDef HAL_SDRAM_Write_32b(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize); - -HAL_StatusTypeDef HAL_SDRAM_Read_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t * pAddress, uint32_t *pDstBuffer, uint32_t BufferSize); -HAL_StatusTypeDef HAL_SDRAM_Write_DMA(SDRAM_HandleTypeDef *hsdram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize); -/** - * @} - */ - -/** @addtogroup SDRAM_Exported_Functions_Group3 - * @{ - */ -/* SDRAM Control functions *****************************************************/ -HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Enable(SDRAM_HandleTypeDef *hsdram); -HAL_StatusTypeDef HAL_SDRAM_WriteProtection_Disable(SDRAM_HandleTypeDef *hsdram); -HAL_StatusTypeDef HAL_SDRAM_SendCommand(SDRAM_HandleTypeDef *hsdram, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout); -HAL_StatusTypeDef HAL_SDRAM_ProgramRefreshRate(SDRAM_HandleTypeDef *hsdram, uint32_t RefreshRate); -HAL_StatusTypeDef HAL_SDRAM_SetAutoRefreshNumber(SDRAM_HandleTypeDef *hsdram, uint32_t AutoRefreshNumber); -uint32_t HAL_SDRAM_GetModeStatus(SDRAM_HandleTypeDef *hsdram); -/** - * @} - */ - -/** @addtogroup SDRAM_Exported_Functions_Group4 - * @{ - */ -/* SDRAM State functions ********************************************************/ -HAL_SDRAM_StateTypeDef HAL_SDRAM_GetState(SDRAM_HandleTypeDef *hsdram); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_SDRAM_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_smartcard.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_smartcard.h deleted file mode 100644 index ffa9ba6..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_smartcard.h +++ /dev/null @@ -1,620 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_smartcard.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of SMARTCARD HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_SMARTCARD_H -#define __STM32F4xx_HAL_SMARTCARD_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup SMARTCARD - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup SMARTCARD_Exported_Types SMARTCARD Exported Types - * @{ - */ - -/** - * @brief SMARTCARD Init Structure definition - */ -typedef struct -{ - uint32_t BaudRate; /*!< This member configures the SmartCard communication baud rate. - The baud rate is computed using the following formula: - - IntegerDivider = ((PCLKx) / (8 * (hirda->Init.BaudRate))) - - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */ - - uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. - This parameter can be a value of @ref SMARTCARD_Word_Length */ - - uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. - This parameter can be a value of @ref SMARTCARD_Stop_Bits */ - - uint32_t Parity; /*!< Specifies the parity mode. - This parameter can be a value of @ref SMARTCARD_Parity - @note When parity is enabled, the computed parity is inserted - at the MSB position of the transmitted data (9th bit when - the word length is set to 9 data bits; 8th bit when the - word length is set to 8 data bits).*/ - - uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. - This parameter can be a value of @ref SMARTCARD_Mode */ - - uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock. - This parameter can be a value of @ref SMARTCARD_Clock_Polarity */ - - uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. - This parameter can be a value of @ref SMARTCARD_Clock_Phase */ - - uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted - data bit (MSB) has to be output on the SCLK pin in synchronous mode. - This parameter can be a value of @ref SMARTCARD_Last_Bit */ - - uint32_t Prescaler; /*!< Specifies the SmartCard Prescaler value used for dividing the system clock - to provide the smartcard clock - This parameter can be a value of @ref SMARTCARD_Prescaler */ - - uint32_t GuardTime; /*!< Specifies the SmartCard Guard Time value in terms of number of baud clocks - The value given in the register (5 significant bits) is multiplied by 2 - to give the division factor of the source clock frequency */ - - uint32_t NACKState; /*!< Specifies the SmartCard NACK Transmission state. - This parameter can be a value of @ref SmartCard_NACK_State */ -}SMARTCARD_InitTypeDef; - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_SMARTCARD_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */ - HAL_SMARTCARD_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ - HAL_SMARTCARD_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ - HAL_SMARTCARD_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ - HAL_SMARTCARD_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ - HAL_SMARTCARD_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ - HAL_SMARTCARD_STATE_TIMEOUT = 0x03, /*!< Timeout state */ - HAL_SMARTCARD_STATE_ERROR = 0x04 /*!< Error */ -}HAL_SMARTCARD_StateTypeDef; - -/** - * @brief SMARTCARD handle Structure definition - */ -typedef struct -{ - USART_TypeDef *Instance; /* USART registers base address */ - - SMARTCARD_InitTypeDef Init; /* SmartCard communication parameters */ - - uint8_t *pTxBuffPtr; /* Pointer to SmartCard Tx transfer Buffer */ - - uint16_t TxXferSize; /* SmartCard Tx Transfer size */ - - uint16_t TxXferCount; /* SmartCard Tx Transfer Counter */ - - uint8_t *pRxBuffPtr; /* Pointer to SmartCard Rx transfer Buffer */ - - uint16_t RxXferSize; /* SmartCard Rx Transfer size */ - - uint16_t RxXferCount; /* SmartCard Rx Transfer Counter */ - - DMA_HandleTypeDef *hdmatx; /* SmartCard Tx DMA Handle parameters */ - - DMA_HandleTypeDef *hdmarx; /* SmartCard Rx DMA Handle parameters */ - - HAL_LockTypeDef Lock; /* Locking object */ - - __IO HAL_SMARTCARD_StateTypeDef State; /* SmartCard communication state */ - - __IO uint32_t ErrorCode; /* SmartCard Error code */ - -}SMARTCARD_HandleTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup SMARTCARD_Exported_Constants SMARTCARD Exported constants - * @{ - */ -/** @defgroup SMARTCARD_Error_Code SMARTCARD Error Code - * @brief SMARTCARD Error Code - * @{ - */ -#define HAL_SMARTCARD_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ -#define HAL_SMARTCARD_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */ -#define HAL_SMARTCARD_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */ -#define HAL_SMARTCARD_ERROR_FE ((uint32_t)0x00000004) /*!< Frame error */ -#define HAL_SMARTCARD_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */ -#define HAL_SMARTCARD_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */ -/** - * @} - */ - -/** @defgroup SMARTCARD_Word_Length SMARTCARD Word Length - * @{ - */ -#define SMARTCARD_WORDLENGTH_9B ((uint32_t)USART_CR1_M) -/** - * @} - */ - -/** @defgroup SMARTCARD_Stop_Bits SMARTCARD Number of Stop Bits - * @{ - */ -#define SMARTCARD_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0) -#define SMARTCARD_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1)) -/** - * @} - */ - -/** @defgroup SMARTCARD_Parity SMARTCARD Parity - * @{ - */ -#define SMARTCARD_PARITY_EVEN ((uint32_t)USART_CR1_PCE) -#define SMARTCARD_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) -/** - * @} - */ - -/** @defgroup SMARTCARD_Mode SMARTCARD Mode - * @{ - */ -#define SMARTCARD_MODE_RX ((uint32_t)USART_CR1_RE) -#define SMARTCARD_MODE_TX ((uint32_t)USART_CR1_TE) -#define SMARTCARD_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) -/** - * @} - */ - -/** @defgroup SMARTCARD_Clock_Polarity SMARTCARD Clock Polarity - * @{ - */ -#define SMARTCARD_POLARITY_LOW ((uint32_t)0x00000000) -#define SMARTCARD_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL) -/** - * @} - */ - -/** @defgroup SMARTCARD_Clock_Phase SMARTCARD Clock Phase - * @{ - */ -#define SMARTCARD_PHASE_1EDGE ((uint32_t)0x00000000) -#define SMARTCARD_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA) -/** - * @} - */ - -/** @defgroup SMARTCARD_Last_Bit SMARTCARD Last Bit - * @{ - */ -#define SMARTCARD_LASTBIT_DISABLE ((uint32_t)0x00000000) -#define SMARTCARD_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL) -/** - * @} - */ - -/** @defgroup SmartCard_NACK_State SMARTCARD NACK State - * @{ - */ -#define SMARTCARD_NACK_ENABLE ((uint32_t)USART_CR3_NACK) -#define SMARTCARD_NACK_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup SmartCard_DMA_Requests SMARTCARD DMA requests - * @{ - */ -#define SMARTCARD_DMAREQ_TX ((uint32_t)USART_CR3_DMAT) -#define SMARTCARD_DMAREQ_RX ((uint32_t)USART_CR3_DMAR) -/** - * @} - */ - -/** @defgroup SMARTCARD_Prescaler SMARTCARD Prescaler - * @{ - */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV2 ((uint32_t)0x00000001) /*!< SYSCLK divided by 2 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV4 ((uint32_t)0x00000002) /*!< SYSCLK divided by 4 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV6 ((uint32_t)0x00000003) /*!< SYSCLK divided by 6 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV8 ((uint32_t)0x00000004) /*!< SYSCLK divided by 8 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV10 ((uint32_t)0x00000005) /*!< SYSCLK divided by 10 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV12 ((uint32_t)0x00000006) /*!< SYSCLK divided by 12 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV14 ((uint32_t)0x00000007) /*!< SYSCLK divided by 14 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV16 ((uint32_t)0x00000008) /*!< SYSCLK divided by 16 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV18 ((uint32_t)0x00000009) /*!< SYSCLK divided by 18 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV20 ((uint32_t)0x0000000A) /*!< SYSCLK divided by 20 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV22 ((uint32_t)0x0000000B) /*!< SYSCLK divided by 22 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV24 ((uint32_t)0x0000000C) /*!< SYSCLK divided by 24 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV26 ((uint32_t)0x0000000D) /*!< SYSCLK divided by 26 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV28 ((uint32_t)0x0000000E) /*!< SYSCLK divided by 28 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV30 ((uint32_t)0x0000000F) /*!< SYSCLK divided by 30 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV32 ((uint32_t)0x00000010) /*!< SYSCLK divided by 32 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV34 ((uint32_t)0x00000011) /*!< SYSCLK divided by 34 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV36 ((uint32_t)0x00000012) /*!< SYSCLK divided by 36 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV38 ((uint32_t)0x00000013) /*!< SYSCLK divided by 38 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV40 ((uint32_t)0x00000014) /*!< SYSCLK divided by 40 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV42 ((uint32_t)0x00000015) /*!< SYSCLK divided by 42 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV44 ((uint32_t)0x00000016) /*!< SYSCLK divided by 44 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV46 ((uint32_t)0x00000017) /*!< SYSCLK divided by 46 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV48 ((uint32_t)0x00000018) /*!< SYSCLK divided by 48 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV50 ((uint32_t)0x00000019) /*!< SYSCLK divided by 50 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV52 ((uint32_t)0x0000001A) /*!< SYSCLK divided by 52 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV54 ((uint32_t)0x0000001B) /*!< SYSCLK divided by 54 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV56 ((uint32_t)0x0000001C) /*!< SYSCLK divided by 56 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV58 ((uint32_t)0x0000001D) /*!< SYSCLK divided by 58 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV60 ((uint32_t)0x0000001E) /*!< SYSCLK divided by 60 */ -#define SMARTCARD_PRESCALER_SYSCLK_DIV62 ((uint32_t)0x0000001F) /*!< SYSCLK divided by 62 */ -/** - * @} - */ - -/** @defgroup SmartCard_Flags SMARTCARD Flags - * Elements values convention: 0xXXXX - * - 0xXXXX : Flag mask in the SR register - * @{ - */ -#define SMARTCARD_FLAG_TXE ((uint32_t)0x00000080) -#define SMARTCARD_FLAG_TC ((uint32_t)0x00000040) -#define SMARTCARD_FLAG_RXNE ((uint32_t)0x00000020) -#define SMARTCARD_FLAG_IDLE ((uint32_t)0x00000010) -#define SMARTCARD_FLAG_ORE ((uint32_t)0x00000008) -#define SMARTCARD_FLAG_NE ((uint32_t)0x00000004) -#define SMARTCARD_FLAG_FE ((uint32_t)0x00000002) -#define SMARTCARD_FLAG_PE ((uint32_t)0x00000001) -/** - * @} - */ - -/** @defgroup SmartCard_Interrupt_definition SMARTCARD Interrupts Definition - * Elements values convention: 0xY000XXXX - * - XXXX : Interrupt mask in the XX register - * - Y : Interrupt source register (2bits) - * - 01: CR1 register - * - 10: CR3 register - * @{ - */ -#define SMARTCARD_IT_PE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_PEIE)) -#define SMARTCARD_IT_TXE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_TXEIE)) -#define SMARTCARD_IT_TC ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_TCIE)) -#define SMARTCARD_IT_RXNE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE)) -#define SMARTCARD_IT_IDLE ((uint32_t)(SMARTCARD_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE)) -#define SMARTCARD_IT_ERR ((uint32_t)(SMARTCARD_CR3_REG_INDEX << 28 | USART_CR3_EIE)) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup SMARTCARD_Exported_Macros SMARTCARD Exported Macros - * @{ - */ - -/** @brief Reset SMARTCARD handle state - * @param __HANDLE__: specifies the SMARTCARD Handle. - * @retval None - */ -#define __HAL_SMARTCARD_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SMARTCARD_STATE_RESET) - -/** @brief Flushs the Smartcard DR register - * @param __HANDLE__: specifies the SMARTCARD Handle. - */ -#define __HAL_SMARTCARD_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR) - -/** @brief Checks whether the specified Smartcard flag is set or not. - * @param __HANDLE__: specifies the SMARTCARD Handle. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg SMARTCARD_FLAG_TXE: Transmit data register empty flag - * @arg SMARTCARD_FLAG_TC: Transmission Complete flag - * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag - * @arg SMARTCARD_FLAG_IDLE: Idle Line detection flag - * @arg SMARTCARD_FLAG_ORE: Overrun Error flag - * @arg SMARTCARD_FLAG_NE: Noise Error flag - * @arg SMARTCARD_FLAG_FE: Framing Error flag - * @arg SMARTCARD_FLAG_PE: Parity Error flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_SMARTCARD_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) - -/** @brief Clears the specified Smartcard pending flags. - * @param __HANDLE__: specifies the SMARTCARD Handle. - * @param __FLAG__: specifies the flag to check. - * This parameter can be any combination of the following values: - * @arg SMARTCARD_FLAG_TC: Transmission Complete flag. - * @arg SMARTCARD_FLAG_RXNE: Receive data register not empty flag. - * - * @note PE (Parity error), FE (Framing error), NE (Noise error) and ORE (Overrun - * error) flags are cleared by software sequence: a read operation to - * USART_SR register followed by a read operation to USART_DR register. - * @note RXNE flag can be also cleared by a read to the USART_DR register. - * @note TC flag can be also cleared by software sequence: a read operation to - * USART_SR register followed by a write operation to USART_DR register. - * @note TXE flag is cleared only by a write to the USART_DR register. - */ -#define __HAL_SMARTCARD_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) - -/** @brief Clear the SMARTCARD PE pending flag. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @retval None - */ -#define __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg; \ - tmpreg = (__HANDLE__)->Instance->SR; \ - tmpreg = (__HANDLE__)->Instance->DR; \ - UNUSED(tmpreg); \ - } while(0) - -/** @brief Clear the SMARTCARD FE pending flag. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @retval None - */ -#define __HAL_SMARTCARD_CLEAR_FEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Clear the SMARTCARD NE pending flag. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @retval None - */ -#define __HAL_SMARTCARD_CLEAR_NEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Clear the SMARTCARD ORE pending flag. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @retval None - */ -#define __HAL_SMARTCARD_CLEAR_OREFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Clear the SMARTCARD IDLE pending flag. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @retval None - */ -#define __HAL_SMARTCARD_CLEAR_IDLEFLAG(__HANDLE__) __HAL_SMARTCARD_CLEAR_PEFLAG(__HANDLE__) - - -/** @brief Enables or disables the specified SmartCard interrupts. - * @param __HANDLE__: specifies the SMARTCARD Handle. - * @param __INTERRUPT__: specifies the SMARTCARD interrupt source to check. - * This parameter can be one of the following values: - * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt - * @arg SMARTCARD_IT_TC: Transmission complete interrupt - * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt - * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt - * @arg SMARTCARD_IT_PE: Parity Error interrupt - * @arg SMARTCARD_IT_ERR: Error interrupt(Frame error, noise error, overrun error) - */ -#define __HAL_SMARTCARD_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK)): \ - ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & SMARTCARD_IT_MASK))) -#define __HAL_SMARTCARD_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & SMARTCARD_IT_MASK)): \ - ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & SMARTCARD_IT_MASK))) - -/** @brief Checks whether the specified SmartCard interrupt has occurred or not. - * @param __HANDLE__: specifies the SmartCard Handle. - * @param __IT__: specifies the SMARTCARD interrupt source to check. - * This parameter can be one of the following values: - * @arg SMARTCARD_IT_TXE: Transmit Data Register empty interrupt - * @arg SMARTCARD_IT_TC: Transmission complete interrupt - * @arg SMARTCARD_IT_RXNE: Receive Data register not empty interrupt - * @arg SMARTCARD_IT_IDLE: Idle line detection interrupt - * @arg SMARTCARD_IT_ERR: Error interrupt - * @arg SMARTCARD_IT_PE: Parity Error interrupt - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_SMARTCARD_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1: (__HANDLE__)->Instance->CR3) & (((uint32_t)(__IT__)) & SMARTCARD_IT_MASK)) - -/** @brief Macro to enable the SMARTCARD's one bit sample method - * @param __HANDLE__: specifies the SMARTCARD Handle. - * @retval None - */ -#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) - -/** @brief Macro to disable the SMARTCARD's one bit sample method - * @param __HANDLE__: specifies the SMARTCARD Handle. - * @retval None - */ -#define __HAL_SMARTCARD_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT)) - -/** @brief Enable the USART associated to the SMARTCARD Handle - * @param __HANDLE__: specifies the SMARTCARD Handle. - * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). - * @retval None - */ -#define __HAL_SMARTCARD_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) - -/** @brief Disable the USART associated to the SMARTCARD Handle - * @param __HANDLE__: specifies the SMARTCARD Handle. - * SMARTCARD Handle selects the USARTx peripheral (USART availability and x value depending on device). - * @retval None - */ -#define __HAL_SMARTCARD_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) - -/** @brief Macros to enable or disable the SmartCard DMA request. - * @param __HANDLE__: specifies the SmartCard Handle. - * @param __REQUEST__: specifies the SmartCard DMA request. - * This parameter can be one of the following values: - * @arg SMARTCARD_DMAREQ_TX: SmartCard DMA transmit request - * @arg SMARTCARD_DMAREQ_RX: SmartCard DMA receive request - */ -#define __HAL_SMARTCARD_DMA_REQUEST_ENABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 |= (__REQUEST__)) -#define __HAL_SMARTCARD_DMA_REQUEST_DISABLE(__HANDLE__, __REQUEST__) ((__HANDLE__)->Instance->CR3 &= ~(__REQUEST__)) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup SMARTCARD_Exported_Functions - * @{ - */ - -/** @addtogroup SMARTCARD_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions **********************************/ -HAL_StatusTypeDef HAL_SMARTCARD_Init(SMARTCARD_HandleTypeDef *hsc); -HAL_StatusTypeDef HAL_SMARTCARD_ReInit(SMARTCARD_HandleTypeDef *hsc); -HAL_StatusTypeDef HAL_SMARTCARD_DeInit(SMARTCARD_HandleTypeDef *hsc); -void HAL_SMARTCARD_MspInit(SMARTCARD_HandleTypeDef *hsc); -void HAL_SMARTCARD_MspDeInit(SMARTCARD_HandleTypeDef *hsc); -/** - * @} - */ - -/** @addtogroup SMARTCARD_Exported_Functions_Group2 - * @{ - */ -/* IO operation functions *******************************************************/ -HAL_StatusTypeDef HAL_SMARTCARD_Transmit(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_SMARTCARD_Receive(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_SMARTCARD_Transmit_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SMARTCARD_Receive_IT(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SMARTCARD_Transmit_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SMARTCARD_Receive_DMA(SMARTCARD_HandleTypeDef *hsc, uint8_t *pData, uint16_t Size); -void HAL_SMARTCARD_IRQHandler(SMARTCARD_HandleTypeDef *hsc); -void HAL_SMARTCARD_TxCpltCallback(SMARTCARD_HandleTypeDef *hsc); -void HAL_SMARTCARD_RxCpltCallback(SMARTCARD_HandleTypeDef *hsc); -void HAL_SMARTCARD_ErrorCallback(SMARTCARD_HandleTypeDef *hsc); -/** - * @} - */ - -/** @addtogroup SMARTCARD_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State functions **************************************************/ -HAL_SMARTCARD_StateTypeDef HAL_SMARTCARD_GetState(SMARTCARD_HandleTypeDef *hsc); -uint32_t HAL_SMARTCARD_GetError(SMARTCARD_HandleTypeDef *hsc); - -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup SMARTCARD_Private_Constants SMARTCARD Private Constants - * @{ - */ - -/** @brief SMARTCARD interruptions flag mask - * - */ -#define SMARTCARD_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \ - USART_CR1_IDLEIE | USART_CR3_EIE ) -#define SMARTCARD_DIV(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_))) -#define SMARTCARD_DIVMANT(_PCLK_, _BAUD_) (SMARTCARD_DIV((_PCLK_), (_BAUD_))/100) -#define SMARTCARD_DIVFRAQ(_PCLK_, _BAUD_) (((SMARTCARD_DIV((_PCLK_), (_BAUD_)) - (SMARTCARD_DIVMANT((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100) -#define SMARTCARD_BRR(_PCLK_, _BAUD_) ((SMARTCARD_DIVMANT((_PCLK_), (_BAUD_)) << 4)|(SMARTCARD_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F)) - -#define SMARTCARD_CR1_REG_INDEX 1 -#define SMARTCARD_CR3_REG_INDEX 3 -/** - * @} - */ - -/* Private macros --------------------------------------------------------*/ -/** @defgroup SMARTCARD_Private_Macros SMARTCARD Private Macros - * @{ - */ -#define IS_SMARTCARD_WORD_LENGTH(LENGTH) ((LENGTH) == SMARTCARD_WORDLENGTH_9B) -#define IS_SMARTCARD_STOPBITS(STOPBITS) (((STOPBITS) == SMARTCARD_STOPBITS_0_5) || \ - ((STOPBITS) == SMARTCARD_STOPBITS_1_5)) -#define IS_SMARTCARD_PARITY(PARITY) (((PARITY) == SMARTCARD_PARITY_EVEN) || \ - ((PARITY) == SMARTCARD_PARITY_ODD)) -#define IS_SMARTCARD_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3) == 0x00) && ((MODE) != (uint32_t)0x000000)) -#define IS_SMARTCARD_POLARITY(CPOL) (((CPOL) == SMARTCARD_POLARITY_LOW) || ((CPOL) == SMARTCARD_POLARITY_HIGH)) -#define IS_SMARTCARD_PHASE(CPHA) (((CPHA) == SMARTCARD_PHASE_1EDGE) || ((CPHA) == SMARTCARD_PHASE_2EDGE)) -#define IS_SMARTCARD_LASTBIT(LASTBIT) (((LASTBIT) == SMARTCARD_LASTBIT_DISABLE) || \ - ((LASTBIT) == SMARTCARD_LASTBIT_ENABLE)) -#define IS_SMARTCARD_NACK_STATE(NACK) (((NACK) == SMARTCARD_NACK_ENABLE) || \ - ((NACK) == SMARTCARD_NACK_DISABLE)) -#define IS_SMARTCARD_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup SMARTCARD_Private_Functions SMARTCARD Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_SMARTCARD_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spdifrx.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spdifrx.h deleted file mode 100644 index 1ba666b..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spdifrx.h +++ /dev/null @@ -1,559 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_spdifrx.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of SPDIFRX HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_SPDIFRX_H -#define __STM32F4xx_HAL_SPDIFRX_H - -#ifdef __cplusplus - extern "C" { -#endif - -#if defined(STM32F446xx) - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup SPDIFRX - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup SPDIFRX_Exported_Types SPDIFRX Exported Types - * @{ - */ - -/** - * @brief SPDIFRX Init structure definition - */ -typedef struct -{ - uint32_t InputSelection; /*!< Specifies the SPDIF input selection. - This parameter can be a value of @ref SPDIFRX_Input_Selection */ - - uint32_t Retries; /*!< Specifies the Maximum allowed re-tries during synchronization phase. - This parameter can be a value of @ref SPDIFRX_Max_Retries */ - - uint32_t WaitForActivity; /*!< Specifies the wait for activity on SPDIF selected input. - This parameter can be a value of @ref SPDIFRX_Wait_For_Activity. */ - - uint32_t ChannelSelection; /*!< Specifies whether the control flow will take the channel status from channel A or B. - This parameter can be a value of @ref SPDIFRX_Channel_Selection */ - - uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...). - This parameter can be a value of @ref SPDIFRX_Data_Format */ - - uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode. - This parameter can be a value of @ref SPDIFRX_Stereo_Mode */ - - uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not into the received frame. - This parameter can be a value of @ref SPDIFRX_PT_Mask */ - - uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not into the received frame. - This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */ - - uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame. - This parameter can be a value of @ref SPDIFRX_V_Mask */ - - uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not into the received frame. - This parameter can be a value of @ref SPDIFRX_PE_Mask */ - -}SPDIFRX_InitTypeDef; - -/** - * @brief SPDIFRX SetDataFormat structure definition - */ -typedef struct -{ - uint32_t DataFormat; /*!< Specifies the Data samples format (LSB, MSB, ...). - This parameter can be a value of @ref SPDIFRX_Data_Format */ - - uint32_t StereoMode; /*!< Specifies whether the peripheral is in stereo or mono mode. - This parameter can be a value of @ref SPDIFRX_Stereo_Mode */ - - uint32_t PreambleTypeMask; /*!< Specifies whether The preamble type bits are copied or not into the received frame. - This parameter can be a value of @ref SPDIFRX_PT_Mask */ - - uint32_t ChannelStatusMask; /*!< Specifies whether the channel status and user bits are copied or not into the received frame. - This parameter can be a value of @ref SPDIFRX_ChannelStatus_Mask */ - - uint32_t ValidityBitMask; /*!< Specifies whether the validity bit is copied or not into the received frame. - This parameter can be a value of @ref SPDIFRX_V_Mask */ - - uint32_t ParityErrorMask; /*!< Specifies whether the parity error bit is copied or not into the received frame. - This parameter can be a value of @ref SPDIFRX_PE_Mask */ - -}SPDIFRX_SetDataFormatTypeDef; - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_SPDIFRX_STATE_RESET = 0x00, /*!< SPDIFRX not yet initialized or disabled */ - HAL_SPDIFRX_STATE_READY = 0x01, /*!< SPDIFRX initialized and ready for use */ - HAL_SPDIFRX_STATE_BUSY = 0x02, /*!< SPDIFRX internal process is ongoing */ - HAL_SPDIFRX_STATE_BUSY_RX = 0x03, /*!< SPDIFRX internal Data Flow RX process is ongoing */ - HAL_SPDIFRX_STATE_BUSY_CX = 0x04, /*!< SPDIFRX internal Control Flow RX process is ongoing */ - HAL_SPDIFRX_STATE_ERROR = 0x07 /*!< SPDIFRX error state */ -}HAL_SPDIFRX_StateTypeDef; - -/** - * @brief SPDIFRX handle Structure definition - */ -typedef struct -{ - SPDIFRX_TypeDef *Instance; /* SPDIFRX registers base address */ - - SPDIFRX_InitTypeDef Init; /* SPDIFRX communication parameters */ - - uint32_t *pRxBuffPtr; /* Pointer to SPDIFRX Rx transfer buffer */ - - uint32_t *pCsBuffPtr; /* Pointer to SPDIFRX Cx transfer buffer */ - - __IO uint16_t RxXferSize; /* SPDIFRX Rx transfer size */ - - __IO uint16_t RxXferCount; /* SPDIFRX Rx transfer counter - (This field is initialized at the - same value as transfer size at the - beginning of the transfer and - decremented when a sample is received. - NbSamplesReceived = RxBufferSize-RxBufferCount) */ - - __IO uint16_t CsXferSize; /* SPDIFRX Rx transfer size */ - - __IO uint16_t CsXferCount; /* SPDIFRX Rx transfer counter - (This field is initialized at the - same value as transfer size at the - beginning of the transfer and - decremented when a sample is received. - NbSamplesReceived = RxBufferSize-RxBufferCount) */ - - DMA_HandleTypeDef *hdmaCsRx; /* SPDIFRX EC60958_channel_status and user_information DMA handle parameters */ - - DMA_HandleTypeDef *hdmaDrRx; /* SPDIFRX Rx DMA handle parameters */ - - __IO HAL_LockTypeDef Lock; /* SPDIFRX locking object */ - - __IO HAL_SPDIFRX_StateTypeDef State; /* SPDIFRX communication state */ - - __IO uint32_t ErrorCode; /* SPDIFRX Error code */ - -}SPDIFRX_HandleTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup SPDIFRX_Exported_Constants SPDIFRX Exported Constants - * @{ - */ -/** @defgroup SPDIFRX_ErrorCode SPDIFRX Error Code - * @{ - */ -#define HAL_SPDIFRX_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ -#define HAL_SPDIFRX_ERROR_TIMEOUT ((uint32_t)0x00000001) /*!< Timeout error */ -#define HAL_SPDIFRX_ERROR_OVR ((uint32_t)0x00000002) /*!< OVR error */ -#define HAL_SPDIFRX_ERROR_PE ((uint32_t)0x00000004) /*!< Parity error */ -#define HAL_SPDIFRX_ERROR_DMA ((uint32_t)0x00000008) /*!< DMA transfer error */ -#define HAL_SPDIFRX_ERROR_UNKNOWN ((uint32_t)0x00000010) /*!< Unknown Error error */ -/** - * @} - */ - -/** @defgroup SPDIFRX_Input_Selection SPDIFRX Input Selection - * @{ - */ -#define SPDIFRX_INPUT_IN0 ((uint32_t)0x00000000) -#define SPDIFRX_INPUT_IN1 ((uint32_t)0x00010000) -#define SPDIFRX_INPUT_IN2 ((uint32_t)0x00020000) -#define SPDIFRX_INPUT_IN3 ((uint32_t)0x00030000) -/** - * @} - */ - -/** @defgroup SPDIFRX_Max_Retries SPDIFRX Maximum Retries - * @{ - */ -#define SPDIFRX_MAXRETRIES_NONE ((uint32_t)0x00000000) -#define SPDIFRX_MAXRETRIES_3 ((uint32_t)0x00001000) -#define SPDIFRX_MAXRETRIES_15 ((uint32_t)0x00002000) -#define SPDIFRX_MAXRETRIES_63 ((uint32_t)0x00003000) -/** - * @} - */ - -/** @defgroup SPDIFRX_Wait_For_Activity SPDIFRX Wait For Activity - * @{ - */ -#define SPDIFRX_WAITFORACTIVITY_OFF ((uint32_t)0x00000000) -#define SPDIFRX_WAITFORACTIVITY_ON ((uint32_t)SPDIFRX_CR_WFA) -/** - * @} - */ - -/** @defgroup SPDIFRX_PT_Mask SPDIFRX Preamble Type Mask -* @{ -*/ -#define SPDIFRX_PREAMBLETYPEMASK_OFF ((uint32_t)0x00000000) -#define SPDIFRX_PREAMBLETYPEMASK_ON ((uint32_t)SPDIFRX_CR_PTMSK) -/** - * @} - */ - -/** @defgroup SPDIFRX_ChannelStatus_Mask SPDIFRX Channel Status Mask -* @{ -*/ -#define SPDIFRX_CHANNELSTATUS_OFF ((uint32_t)0x00000000) /* The channel status and user bits are copied into the SPDIF_DR */ -#define SPDIFRX_CHANNELSTATUS_ON ((uint32_t)SPDIFRX_CR_CUMSK) /* The channel status and user bits are not copied into the SPDIF_DR, zeros are written instead*/ -/** - * @} - */ - -/** @defgroup SPDIFRX_V_Mask SPDIFRX Validity Mask -* @{ -*/ -#define SPDIFRX_VALIDITYMASK_OFF ((uint32_t)0x00000000) -#define SPDIFRX_VALIDITYMASK_ON ((uint32_t)SPDIFRX_CR_VMSK) -/** - * @} - */ - -/** @defgroup SPDIFRX_PE_Mask SPDIFRX Parity Error Mask -* @{ -*/ -#define SPDIFRX_PARITYERRORMASK_OFF ((uint32_t)0x00000000) -#define SPDIFRX_PARITYERRORMASK_ON ((uint32_t)SPDIFRX_CR_PMSK) -/** - * @} - */ - -/** @defgroup SPDIFRX_Channel_Selection SPDIFRX Channel Selection - * @{ - */ -#define SPDIFRX_CHANNEL_A ((uint32_t)0x00000000) -#define SPDIFRX_CHANNEL_B ((uint32_t)SPDIFRX_CR_CHSEL) -/** - * @} - */ - -/** @defgroup SPDIFRX_Data_Format SPDIFRX Data Format - * @{ - */ -#define SPDIFRX_DATAFORMAT_LSB ((uint32_t)0x00000000) -#define SPDIFRX_DATAFORMAT_MSB ((uint32_t)0x00000010) -#define SPDIFRX_DATAFORMAT_32BITS ((uint32_t)0x00000020) -/** - * @} - */ - -/** @defgroup SPDIFRX_Stereo_Mode SPDIFRX Stereo Mode - * @{ - */ -#define SPDIFRX_STEREOMODE_DISABLE ((uint32_t)0x00000000) -#define SPDIFRX_STEREOMODE_ENABLE ((uint32_t)SPDIFRX_CR_RXSTEO) -/** - * @} - */ - -/** @defgroup SPDIFRX_State SPDIFRX State - * @{ - */ - -#define SPDIFRX_STATE_IDLE ((uint32_t)0xFFFFFFFC) -#define SPDIFRX_STATE_SYNC ((uint32_t)0x00000001) -#define SPDIFRX_STATE_RCV ((uint32_t)SPDIFRX_CR_SPDIFEN) -/** - * @} - */ - -/** @defgroup SPDIFRX_Interrupts_Definition SPDIFRX Interrupts Definition - * @{ - */ -#define SPDIFRX_IT_RXNE ((uint32_t)SPDIFRX_IMR_RXNEIE) -#define SPDIFRX_IT_CSRNE ((uint32_t)SPDIFRX_IMR_CSRNEIE) -#define SPDIFRX_IT_PERRIE ((uint32_t)SPDIFRX_IMR_PERRIE) -#define SPDIFRX_IT_OVRIE ((uint32_t)SPDIFRX_IMR_OVRIE) -#define SPDIFRX_IT_SBLKIE ((uint32_t)SPDIFRX_IMR_SBLKIE) -#define SPDIFRX_IT_SYNCDIE ((uint32_t)SPDIFRX_IMR_SYNCDIE) -#define SPDIFRX_IT_IFEIE ((uint32_t)SPDIFRX_IMR_IFEIE ) -/** - * @} - */ - -/** @defgroup SPDIFRX_Flags_Definition SPDIFRX Flags Definition - * @{ - */ -#define SPDIFRX_FLAG_RXNE ((uint32_t)SPDIFRX_SR_RXNE) -#define SPDIFRX_FLAG_CSRNE ((uint32_t)SPDIFRX_SR_CSRNE) -#define SPDIFRX_FLAG_PERR ((uint32_t)SPDIFRX_SR_PERR) -#define SPDIFRX_FLAG_OVR ((uint32_t)SPDIFRX_SR_OVR) -#define SPDIFRX_FLAG_SBD ((uint32_t)SPDIFRX_SR_SBD) -#define SPDIFRX_FLAG_SYNCD ((uint32_t)SPDIFRX_SR_SYNCD) -#define SPDIFRX_FLAG_FERR ((uint32_t)SPDIFRX_SR_FERR) -#define SPDIFRX_FLAG_SERR ((uint32_t)SPDIFRX_SR_SERR) -#define SPDIFRX_FLAG_TERR ((uint32_t)SPDIFRX_SR_TERR) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macros -----------------------------------------------------------*/ -/** @defgroup SPDIFRX_Exported_macros SPDIFRX Exported Macros - * @{ - */ - -/** @brief Reset SPDIFRX handle state - * @param __HANDLE__: SPDIFRX handle. - * @retval None - */ -#define __HAL_SPDIFRX_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = (uint16_t)SPDIFRX_CR_SPDIFEN) - -/** @brief Disable the specified SPDIFRX peripheral (IDLE State). - * @param __HANDLE__: specifies the SPDIFRX Handle. - * @retval None - */ -#define __HAL_SPDIFRX_IDLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= SPDIFRX_STATE_IDLE) - -/** @brief Enable the specified SPDIFRX peripheral (SYNC State). - * @param __HANDLE__: specifies the SPDIFRX Handle. - * @retval None - */ -#define __HAL_SPDIFRX_SYNC(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_SYNC) - - -/** @brief Enable the specified SPDIFRX peripheral (RCV State). - * @param __HANDLE__: specifies the SPDIFRX Handle. - * @retval None - */ -#define __HAL_SPDIFRX_RCV(__HANDLE__) ((__HANDLE__)->Instance->CR |= SPDIFRX_STATE_RCV) - - -/** @brief Enable or disable the specified SPDIFRX interrupts. - * @param __HANDLE__: specifies the SPDIFRX Handle. - * @param __INTERRUPT__: specifies the interrupt source to enable or disable. - * This parameter can be one of the following values: - * @arg SPDIFRX_IT_RXNE - * @arg SPDIFRX_IT_CSRNE - * @arg SPDIFRX_IT_PERRIE - * @arg SPDIFRX_IT_OVRIE - * @arg SPDIFRX_IT_SBLKIE - * @arg SPDIFRX_IT_SYNCDIE - * @arg SPDIFRX_IT_IFEIE - * @retval None - */ -#define __HAL_SPDIFRX_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR |= (__INTERRUPT__)) -#define __HAL_SPDIFRX_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->IMR &= (uint16_t)(~(__INTERRUPT__))) - -/** @brief Checks if the specified SPDIFRX interrupt source is enabled or disabled. - * @param __HANDLE__: specifies the SPDIFRX Handle. - * @param __INTERRUPT__: specifies the SPDIFRX interrupt source to check. - * This parameter can be one of the following values: - * @arg SPDIFRX_IT_RXNE - * @arg SPDIFRX_IT_CSRNE - * @arg SPDIFRX_IT_PERRIE - * @arg SPDIFRX_IT_OVRIE - * @arg SPDIFRX_IT_SBLKIE - * @arg SPDIFRX_IT_SYNCDIE - * @arg SPDIFRX_IT_IFEIE - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_SPDIFRX_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->IMR & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Checks whether the specified SPDIFRX flag is set or not. - * @param __HANDLE__: specifies the SPDIFRX Handle. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg SPDIFRX_FLAG_RXNE - * @arg SPDIFRX_FLAG_CSRNE - * @arg SPDIFRX_FLAG_PERR - * @arg SPDIFRX_FLAG_OVR - * @arg SPDIFRX_FLAG_SBD - * @arg SPDIFRX_FLAG_SYNCD - * @arg SPDIFRX_FLAG_FERR - * @arg SPDIFRX_FLAG_SERR - * @arg SPDIFRX_FLAG_TERR - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_SPDIFRX_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) - -/** @brief Clears the specified SPDIFRX SR flag, in setting the proper IFCR register bit. - * @param __HANDLE__: specifies the USART Handle. - * @param __IT_CLEAR__: specifies the interrupt clear register flag that needs to be set - * to clear the corresponding interrupt - * This parameter can be one of the following values: - * @arg SPDIFRX_FLAG_PERR - * @arg SPDIFRX_FLAG_OVR - * @arg SPDIFRX_SR_SBD - * @arg SPDIFRX_SR_SYNCD - * @retval None - */ -#define __HAL_SPDIFRX_CLEAR_IT(__HANDLE__, __IT_CLEAR__) ((__HANDLE__)->Instance->IFCR = (uint32_t)(__IT_CLEAR__)) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup SPDIFRX_Exported_Functions - * @{ - */ - -/** @addtogroup SPDIFRX_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions **********************************/ -HAL_StatusTypeDef HAL_SPDIFRX_Init(SPDIFRX_HandleTypeDef *hspdif); -HAL_StatusTypeDef HAL_SPDIFRX_DeInit (SPDIFRX_HandleTypeDef *hspdif); -void HAL_SPDIFRX_MspInit(SPDIFRX_HandleTypeDef *hspdif); -void HAL_SPDIFRX_MspDeInit(SPDIFRX_HandleTypeDef *hspdif); -HAL_StatusTypeDef HAL_SPDIFRX_SetDataFormat(SPDIFRX_HandleTypeDef *hspdif, SPDIFRX_SetDataFormatTypeDef sDataFormat); -/** - * @} - */ - -/** @addtogroup SPDIFRX_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions ***************************************************/ - /* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size, uint32_t Timeout); - - /* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_IT(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); -void HAL_SPDIFRX_IRQHandler(SPDIFRX_HandleTypeDef *hspdif); - -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_SPDIFRX_ReceiveControlFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SPDIFRX_ReceiveDataFlow_DMA(SPDIFRX_HandleTypeDef *hspdif, uint32_t *pData, uint16_t Size); - -HAL_StatusTypeDef HAL_SPDIFRX_DMAStop(SPDIFRX_HandleTypeDef *hspdif); - -/* Callbacks used in non blocking modes (Interrupt and DMA) *******************/ -void HAL_SPDIFRX_RxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif); -void HAL_SPDIFRX_RxCpltCallback(SPDIFRX_HandleTypeDef *hspdif); -void HAL_SPDIFRX_ErrorCallback(SPDIFRX_HandleTypeDef *hspdif); -void HAL_SPDIFRX_CxHalfCpltCallback(SPDIFRX_HandleTypeDef *hspdif); -void HAL_SPDIFRX_CxCpltCallback(SPDIFRX_HandleTypeDef *hspdif); -/** - * @} - */ - -/** @addtogroup SPDIFRX_Exported_Functions_Group3 - * @{ - */ -/* Peripheral Control and State functions ************************************/ -HAL_SPDIFRX_StateTypeDef HAL_SPDIFRX_GetState(SPDIFRX_HandleTypeDef *hspdif); -uint32_t HAL_SPDIFRX_GetError(SPDIFRX_HandleTypeDef *hspdif); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup SPDIFRX_Private_Macros SPDIFRX Private Macros - * @{ - */ -#define IS_SPDIFRX_INPUT_SELECT(INPUT) (((INPUT) == SPDIFRX_INPUT_IN1) || \ - ((INPUT) == SPDIFRX_INPUT_IN2) || \ - ((INPUT) == SPDIFRX_INPUT_IN3) || \ - ((INPUT) == SPDIFRX_INPUT_IN0)) -#define IS_SPDIFRX_MAX_RETRIES(RET) (((RET) == SPDIFRX_MAXRETRIES_NONE) || \ - ((RET) == SPDIFRX_MAXRETRIES_3) || \ - ((RET) == SPDIFRX_MAXRETRIES_15) || \ - ((RET) == SPDIFRX_MAXRETRIES_63)) -#define IS_SPDIFRX_WAIT_FOR_ACTIVITY(VAL) (((VAL) == SPDIFRX_WAITFORACTIVITY_ON) || \ - ((VAL) == SPDIFRX_WAITFORACTIVITY_OFF)) -#define IS_PREAMBLE_TYPE_MASK(VAL) (((VAL) == SPDIFRX_PREAMBLETYPEMASK_ON) || \ - ((VAL) == SPDIFRX_PREAMBLETYPEMASK_OFF)) -#define IS_VALIDITY_MASK(VAL) (((VAL) == SPDIFRX_VALIDITYMASK_OFF) || \ - ((VAL) == SPDIFRX_VALIDITYMASK_ON)) -#define IS_PARITY_ERROR_MASK(VAL) (((VAL) == SPDIFRX_PARITYERRORMASK_OFF) || \ - ((VAL) == SPDIFRX_PARITYERRORMASK_ON)) -#define IS_SPDIFRX_CHANNEL(CHANNEL) (((CHANNEL) == SPDIFRX_CHANNEL_A) || \ - ((CHANNEL) == SPDIFRX_CHANNEL_B)) -#define IS_SPDIFRX_DATA_FORMAT(FORMAT) (((FORMAT) == SPDIFRX_DATAFORMAT_LSB) || \ - ((FORMAT) == SPDIFRX_DATAFORMAT_MSB) || \ - ((FORMAT) == SPDIFRX_DATAFORMAT_32BITS)) -#define IS_STEREO_MODE(MODE) (((MODE) == SPDIFRX_STEREOMODE_DISABLE) || \ - ((MODE) == SPDIFRX_STEREOMODE_ENABLE)) - -#define IS_CHANNEL_STATUS_MASK(VAL) (((VAL) == SPDIFRX_CHANNELSTATUS_ON) || \ - ((VAL) == SPDIFRX_CHANNELSTATUS_OFF)) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup SPDIFRX_Private_Functions SPDIFRX Private Functions - * @{ - */ -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#endif /* STM32F446xx */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_HAL_SPDIFRX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spi.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spi.h deleted file mode 100644 index 8057262..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_spi.h +++ /dev/null @@ -1,575 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_spi.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of SPI HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_SPI_H -#define __STM32F4xx_HAL_SPI_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup SPI - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup SPI_Exported_Types SPI Exported Types - * @{ - */ - -/** - * @brief SPI Configuration Structure definition - */ -typedef struct -{ - uint32_t Mode; /*!< Specifies the SPI operating mode. - This parameter can be a value of @ref SPI_mode */ - - uint32_t Direction; /*!< Specifies the SPI Directional mode state. - This parameter can be a value of @ref SPI_Direction_mode */ - - uint32_t DataSize; /*!< Specifies the SPI data size. - This parameter can be a value of @ref SPI_data_size */ - - uint32_t CLKPolarity; /*!< Specifies the serial clock steady state. - This parameter can be a value of @ref SPI_Clock_Polarity */ - - uint32_t CLKPhase; /*!< Specifies the clock active edge for the bit capture. - This parameter can be a value of @ref SPI_Clock_Phase */ - - uint32_t NSS; /*!< Specifies whether the NSS signal is managed by - hardware (NSS pin) or by software using the SSI bit. - This parameter can be a value of @ref SPI_Slave_Select_management */ - - uint32_t BaudRatePrescaler; /*!< Specifies the Baud Rate prescaler value which will be - used to configure the transmit and receive SCK clock. - This parameter can be a value of @ref SPI_BaudRate_Prescaler - @note The communication clock is derived from the master - clock. The slave clock does not need to be set */ - - uint32_t FirstBit; /*!< Specifies whether data transfers start from MSB or LSB bit. - This parameter can be a value of @ref SPI_MSB_LSB_transmission */ - - uint32_t TIMode; /*!< Specifies if the TI mode is enabled or not. - This parameter can be a value of @ref SPI_TI_mode */ - - uint32_t CRCCalculation; /*!< Specifies if the CRC calculation is enabled or not. - This parameter can be a value of @ref SPI_CRC_Calculation */ - - uint32_t CRCPolynomial; /*!< Specifies the polynomial used for the CRC calculation. - This parameter must be a number between Min_Data = 0 and Max_Data = 65535 */ - -}SPI_InitTypeDef; - -/** - * @brief HAL SPI State structure definition - */ -typedef enum -{ - HAL_SPI_STATE_RESET = 0x00, /*!< SPI not yet initialized or disabled */ - HAL_SPI_STATE_READY = 0x01, /*!< SPI initialized and ready for use */ - HAL_SPI_STATE_BUSY = 0x02, /*!< SPI process is ongoing */ - HAL_SPI_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ - HAL_SPI_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ - HAL_SPI_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ - HAL_SPI_STATE_ERROR = 0x03 /*!< SPI error state */ - -}HAL_SPI_StateTypeDef; - -/** - * @brief SPI handle Structure definition - */ -typedef struct __SPI_HandleTypeDef -{ - SPI_TypeDef *Instance; /* SPI registers base address */ - - SPI_InitTypeDef Init; /* SPI communication parameters */ - - uint8_t *pTxBuffPtr; /* Pointer to SPI Tx transfer Buffer */ - - uint16_t TxXferSize; /* SPI Tx transfer size */ - - uint16_t TxXferCount; /* SPI Tx Transfer Counter */ - - uint8_t *pRxBuffPtr; /* Pointer to SPI Rx transfer Buffer */ - - uint16_t RxXferSize; /* SPI Rx transfer size */ - - uint16_t RxXferCount; /* SPI Rx Transfer Counter */ - - DMA_HandleTypeDef *hdmatx; /* SPI Tx DMA handle parameters */ - - DMA_HandleTypeDef *hdmarx; /* SPI Rx DMA handle parameters */ - - void (*RxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Rx ISR */ - - void (*TxISR)(struct __SPI_HandleTypeDef * hspi); /* function pointer on Tx ISR */ - - HAL_LockTypeDef Lock; /* SPI locking object */ - - __IO HAL_SPI_StateTypeDef State; /* SPI communication state */ - - __IO uint32_t ErrorCode; /* SPI Error code */ - -}SPI_HandleTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup SPI_Exported_Constants SPI Exported Constants - * @{ - */ - -/** @defgroup SPI_Error_Code SPI Error Code - * @brief SPI Error Code - * @{ - */ -#define HAL_SPI_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ -#define HAL_SPI_ERROR_MODF ((uint32_t)0x00000001) /*!< MODF error */ -#define HAL_SPI_ERROR_CRC ((uint32_t)0x00000002) /*!< CRC error */ -#define HAL_SPI_ERROR_OVR ((uint32_t)0x00000004) /*!< OVR error */ -#define HAL_SPI_ERROR_FRE ((uint32_t)0x00000008) /*!< FRE error */ -#define HAL_SPI_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */ -#define HAL_SPI_ERROR_FLAG ((uint32_t)0x00000020) /*!< Flag: RXNE,TXE, BSY */ -/** - * @} - */ - -/** @defgroup SPI_mode SPI Mode - * @{ - */ -#define SPI_MODE_SLAVE ((uint32_t)0x00000000) -#define SPI_MODE_MASTER (SPI_CR1_MSTR | SPI_CR1_SSI) -/** - * @} - */ - -/** @defgroup SPI_Direction_mode SPI Direction Mode - * @{ - */ -#define SPI_DIRECTION_2LINES ((uint32_t)0x00000000) -#define SPI_DIRECTION_2LINES_RXONLY SPI_CR1_RXONLY -#define SPI_DIRECTION_1LINE SPI_CR1_BIDIMODE -/** - * @} - */ - -/** @defgroup SPI_data_size SPI Data Size - * @{ - */ -#define SPI_DATASIZE_8BIT ((uint32_t)0x00000000) -#define SPI_DATASIZE_16BIT SPI_CR1_DFF -/** - * @} - */ - -/** @defgroup SPI_Clock_Polarity SPI Clock Polarity - * @{ - */ -#define SPI_POLARITY_LOW ((uint32_t)0x00000000) -#define SPI_POLARITY_HIGH SPI_CR1_CPOL -/** - * @} - */ - -/** @defgroup SPI_Clock_Phase SPI Clock Phase - * @{ - */ -#define SPI_PHASE_1EDGE ((uint32_t)0x00000000) -#define SPI_PHASE_2EDGE SPI_CR1_CPHA -/** - * @} - */ - -/** @defgroup SPI_Slave_Select_management SPI Slave Select Management - * @{ - */ -#define SPI_NSS_SOFT SPI_CR1_SSM -#define SPI_NSS_HARD_INPUT ((uint32_t)0x00000000) -#define SPI_NSS_HARD_OUTPUT ((uint32_t)0x00040000) -/** - * @} - */ - -/** @defgroup SPI_BaudRate_Prescaler SPI BaudRate Prescaler - * @{ - */ -#define SPI_BAUDRATEPRESCALER_2 ((uint32_t)0x00000000) -#define SPI_BAUDRATEPRESCALER_4 ((uint32_t)0x00000008) -#define SPI_BAUDRATEPRESCALER_8 ((uint32_t)0x00000010) -#define SPI_BAUDRATEPRESCALER_16 ((uint32_t)0x00000018) -#define SPI_BAUDRATEPRESCALER_32 ((uint32_t)0x00000020) -#define SPI_BAUDRATEPRESCALER_64 ((uint32_t)0x00000028) -#define SPI_BAUDRATEPRESCALER_128 ((uint32_t)0x00000030) -#define SPI_BAUDRATEPRESCALER_256 ((uint32_t)0x00000038) -/** - * @} - */ - -/** @defgroup SPI_MSB_LSB_transmission SPI MSB LSB Transsmission - * @{ - */ -#define SPI_FIRSTBIT_MSB ((uint32_t)0x00000000) -#define SPI_FIRSTBIT_LSB SPI_CR1_LSBFIRST -/** - * @} - */ - -/** @defgroup SPI_TI_mode SPI TI Mode - * @{ - */ -#define SPI_TIMODE_DISABLE ((uint32_t)0x00000000) -#define SPI_TIMODE_ENABLE SPI_CR2_FRF -/** - * @} - */ - -/** @defgroup SPI_CRC_Calculation SPI CRC Calculation - * @{ - */ -#define SPI_CRCCALCULATION_DISABLE ((uint32_t)0x00000000) -#define SPI_CRCCALCULATION_ENABLE SPI_CR1_CRCEN -/** - * @} - */ - -/** @defgroup SPI_Interrupt_definition SPI Interrupt Definition - * @{ - */ -#define SPI_IT_TXE SPI_CR2_TXEIE -#define SPI_IT_RXNE SPI_CR2_RXNEIE -#define SPI_IT_ERR SPI_CR2_ERRIE -/** - * @} - */ - -/** @defgroup SPI_Flags_definition SPI Flags Definition - * @{ - */ -#define SPI_FLAG_RXNE SPI_SR_RXNE -#define SPI_FLAG_TXE SPI_SR_TXE -#define SPI_FLAG_CRCERR SPI_SR_CRCERR -#define SPI_FLAG_MODF SPI_SR_MODF -#define SPI_FLAG_OVR SPI_SR_OVR -#define SPI_FLAG_BSY SPI_SR_BSY -#define SPI_FLAG_FRE SPI_SR_FRE -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup SPI_Exported_Macros SPI Exported Macros - * @{ - */ -/** @brief Reset SPI handle state - * @param __HANDLE__: specifies the SPI handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define __HAL_SPI_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SPI_STATE_RESET) - -/** @brief Enable or disable the specified SPI interrupts. - * @param __HANDLE__: specifies the SPI handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @param __INTERRUPT__: specifies the interrupt source to enable or disable. - * This parameter can be one of the following values: - * @arg SPI_IT_TXE: Tx buffer empty interrupt enable - * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable - * @arg SPI_IT_ERR: Error interrupt enable - * @retval None - */ -#define __HAL_SPI_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 |= (__INTERRUPT__)) -#define __HAL_SPI_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR2 &= (~(__INTERRUPT__))) - -/** @brief Check if the specified SPI interrupt source is enabled or disabled. - * @param __HANDLE__: specifies the SPI handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @param __INTERRUPT__: specifies the SPI interrupt source to check. - * This parameter can be one of the following values: - * @arg SPI_IT_TXE: Tx buffer empty interrupt enable - * @arg SPI_IT_RXNE: RX buffer not empty interrupt enable - * @arg SPI_IT_ERR: Error interrupt enable - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_SPI_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->CR2 & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) - -/** @brief Check whether the specified SPI flag is set or not. - * @param __HANDLE__: specifies the SPI handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg SPI_FLAG_RXNE: Receive buffer not empty flag - * @arg SPI_FLAG_TXE: Transmit buffer empty flag - * @arg SPI_FLAG_CRCERR: CRC error flag - * @arg SPI_FLAG_MODF: Mode fault flag - * @arg SPI_FLAG_OVR: Overrun flag - * @arg SPI_FLAG_BSY: Busy flag - * @arg SPI_FLAG_FRE: Frame format error flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_SPI_GET_FLAG(__HANDLE__, __FLAG__) ((((__HANDLE__)->Instance->SR) & (__FLAG__)) == (__FLAG__)) - -/** @brief Clear the SPI CRCERR pending flag. - * @param __HANDLE__: specifies the SPI handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define __HAL_SPI_CLEAR_CRCERRFLAG(__HANDLE__) ((__HANDLE__)->Instance->SR = ~(SPI_FLAG_CRCERR)) - -/** @brief Clear the SPI MODF pending flag. - * @param __HANDLE__: specifies the SPI handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define __HAL_SPI_CLEAR_MODFFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg; \ - tmpreg = (__HANDLE__)->Instance->SR; \ - (__HANDLE__)->Instance->CR1 &= (~SPI_CR1_SPE); \ - UNUSED(tmpreg); \ - } while(0) - -/** @brief Clear the SPI OVR pending flag. - * @param __HANDLE__: specifies the SPI handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define __HAL_SPI_CLEAR_OVRFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg; \ - tmpreg = (__HANDLE__)->Instance->DR; \ - tmpreg = (__HANDLE__)->Instance->SR; \ - UNUSED(tmpreg); \ - } while(0) - -/** @brief Clear the SPI FRE pending flag. - * @param __HANDLE__: specifies the SPI handle. - * This parameter can be SPI where x: 1, 2, or 3 to select the SPI peripheral. - * @retval None - */ -#define __HAL_SPI_CLEAR_FREFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg; \ - tmpreg = (__HANDLE__)->Instance->SR; \ - UNUSED(tmpreg); \ - }while(0) - -/** @brief Enable SPI - * @param __HANDLE__: specifies the SPI Handle. - * @retval None - */ -#define __HAL_SPI_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_SPE) - -/** @brief Disable SPI - * @param __HANDLE__: specifies the SPI Handle. - * @retval None - */ -#define __HAL_SPI_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SPI_CR1_SPE) -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup SPI_Exported_Functions - * @{ - */ - -/** @addtogroup SPI_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions **********************************/ -HAL_StatusTypeDef HAL_SPI_Init(SPI_HandleTypeDef *hspi); -HAL_StatusTypeDef HAL_SPI_DeInit (SPI_HandleTypeDef *hspi); -void HAL_SPI_MspInit(SPI_HandleTypeDef *hspi); -void HAL_SPI_MspDeInit(SPI_HandleTypeDef *hspi); -/** - * @} - */ - -/** @addtogroup SPI_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions *****************************************************/ -HAL_StatusTypeDef HAL_SPI_Transmit(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_SPI_Receive(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_SPI_TransmitReceive(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_SPI_Transmit_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SPI_Receive_IT(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SPI_TransmitReceive_IT(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size); -HAL_StatusTypeDef HAL_SPI_Transmit_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SPI_Receive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_SPI_TransmitReceive_DMA(SPI_HandleTypeDef *hspi, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size); -HAL_StatusTypeDef HAL_SPI_DMAPause(SPI_HandleTypeDef *hspi); -HAL_StatusTypeDef HAL_SPI_DMAResume(SPI_HandleTypeDef *hspi); -HAL_StatusTypeDef HAL_SPI_DMAStop(SPI_HandleTypeDef *hspi); - -void HAL_SPI_IRQHandler(SPI_HandleTypeDef *hspi); -void HAL_SPI_TxCpltCallback(SPI_HandleTypeDef *hspi); -void HAL_SPI_RxCpltCallback(SPI_HandleTypeDef *hspi); -void HAL_SPI_TxRxCpltCallback(SPI_HandleTypeDef *hspi); -void HAL_SPI_ErrorCallback(SPI_HandleTypeDef *hspi); -void HAL_SPI_TxHalfCpltCallback(SPI_HandleTypeDef *hspi); -void HAL_SPI_RxHalfCpltCallback(SPI_HandleTypeDef *hspi); -void HAL_SPI_TxRxHalfCpltCallback(SPI_HandleTypeDef *hspi); -/** - * @} - */ - -/** @addtogroup SPI_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State and Control functions **************************************/ -HAL_SPI_StateTypeDef HAL_SPI_GetState(SPI_HandleTypeDef *hspi); -uint32_t HAL_SPI_GetError(SPI_HandleTypeDef *hspi); - -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup SPI_Private_Constants SPI Private Constants - * @{ - */ -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup SPI_Private_Macros SPI Private Macros - * @{ - */ - -#define IS_SPI_MODE(MODE) (((MODE) == SPI_MODE_SLAVE) || \ - ((MODE) == SPI_MODE_MASTER)) - - -#define IS_SPI_DIRECTION_MODE(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \ - ((MODE) == SPI_DIRECTION_2LINES_RXONLY) || \ - ((MODE) == SPI_DIRECTION_1LINE)) - -#define IS_SPI_DIRECTION_2LINES_OR_1LINE(MODE) (((MODE) == SPI_DIRECTION_2LINES) || \ - ((MODE) == SPI_DIRECTION_1LINE)) - -#define IS_SPI_DIRECTION_2LINES(MODE) ((MODE) == SPI_DIRECTION_2LINES) - -#define IS_SPI_DATASIZE(DATASIZE) (((DATASIZE) == SPI_DATASIZE_16BIT) || \ - ((DATASIZE) == SPI_DATASIZE_8BIT)) - -#define IS_SPI_CPOL(CPOL) (((CPOL) == SPI_POLARITY_LOW) || \ - ((CPOL) == SPI_POLARITY_HIGH)) - -#define IS_SPI_CPHA(CPHA) (((CPHA) == SPI_PHASE_1EDGE) || \ - ((CPHA) == SPI_PHASE_2EDGE)) - -#define IS_SPI_NSS(NSS) (((NSS) == SPI_NSS_SOFT) || \ - ((NSS) == SPI_NSS_HARD_INPUT) || \ - ((NSS) == SPI_NSS_HARD_OUTPUT)) - -#define IS_SPI_BAUDRATE_PRESCALER(PRESCALER) (((PRESCALER) == SPI_BAUDRATEPRESCALER_2) || \ - ((PRESCALER) == SPI_BAUDRATEPRESCALER_4) || \ - ((PRESCALER) == SPI_BAUDRATEPRESCALER_8) || \ - ((PRESCALER) == SPI_BAUDRATEPRESCALER_16) || \ - ((PRESCALER) == SPI_BAUDRATEPRESCALER_32) || \ - ((PRESCALER) == SPI_BAUDRATEPRESCALER_64) || \ - ((PRESCALER) == SPI_BAUDRATEPRESCALER_128) || \ - ((PRESCALER) == SPI_BAUDRATEPRESCALER_256)) - -#define IS_SPI_FIRST_BIT(BIT) (((BIT) == SPI_FIRSTBIT_MSB) || \ - ((BIT) == SPI_FIRSTBIT_LSB)) - -#define IS_SPI_TIMODE(MODE) (((MODE) == SPI_TIMODE_DISABLE) || \ - ((MODE) == SPI_TIMODE_ENABLE)) - -#define IS_SPI_CRC_CALCULATION(CALCULATION) (((CALCULATION) == SPI_CRCCALCULATION_DISABLE) || \ - ((CALCULATION) == SPI_CRCCALCULATION_ENABLE)) - -#define IS_SPI_CRC_POLYNOMIAL(POLYNOMIAL) (((POLYNOMIAL) >= 0x1) && ((POLYNOMIAL) <= 0xFFFF)) - -#define SPI_1LINE_TX(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= SPI_CR1_BIDIOE) - -#define SPI_1LINE_RX(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~SPI_CR1_BIDIOE) - -#define SPI_RESET_CRC(__HANDLE__) do{(__HANDLE__)->Instance->CR1 &= (~SPI_CR1_CRCEN);\ - (__HANDLE__)->Instance->CR1 |= SPI_CR1_CRCEN;}while(0) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup SPI_Private_Functions SPI Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_SPI_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h deleted file mode 100644 index e6c148d..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_sram.h +++ /dev/null @@ -1,202 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_sram.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of SRAM HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_SRAM_H -#define __STM32F4xx_HAL_SRAM_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx) - #include "stm32f4xx_ll_fsmc.h" -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx) || defined(STM32F446xx) - #include "stm32f4xx_ll_fmc.h" -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */ - - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\ - defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\ - defined(STM32F446xx) -/** @addtogroup SRAM - * @{ - */ - -/* Exported typedef ----------------------------------------------------------*/ - -/** @defgroup SRAM_Exported_Types SRAM Exported Types - * @{ - */ -/** - * @brief HAL SRAM State structures definition - */ -typedef enum -{ - HAL_SRAM_STATE_RESET = 0x00, /*!< SRAM not yet initialized or disabled */ - HAL_SRAM_STATE_READY = 0x01, /*!< SRAM initialized and ready for use */ - HAL_SRAM_STATE_BUSY = 0x02, /*!< SRAM internal process is ongoing */ - HAL_SRAM_STATE_ERROR = 0x03, /*!< SRAM error state */ - HAL_SRAM_STATE_PROTECTED = 0x04 /*!< SRAM peripheral NORSRAM device write protected */ - -}HAL_SRAM_StateTypeDef; - -/** - * @brief SRAM handle Structure definition - */ -typedef struct -{ - FMC_NORSRAM_TypeDef *Instance; /*!< Register base address */ - - FMC_NORSRAM_EXTENDED_TypeDef *Extended; /*!< Extended mode register base address */ - - FMC_NORSRAM_InitTypeDef Init; /*!< SRAM device control configuration parameters */ - - HAL_LockTypeDef Lock; /*!< SRAM locking object */ - - __IO HAL_SRAM_StateTypeDef State; /*!< SRAM device access state */ - - DMA_HandleTypeDef *hdma; /*!< Pointer DMA handler */ - -}SRAM_HandleTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/* Exported macro ------------------------------------------------------------*/ - -/** @defgroup SRAM_Exported_Macros SRAM Exported Macros - * @{ - */ -/** @brief Reset SRAM handle state - * @param __HANDLE__: SRAM handle - * @retval None - */ -#define __HAL_SRAM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_SRAM_STATE_RESET) - -/** - * @} - */ -/* Exported functions --------------------------------------------------------*/ - -/** @addtogroup SRAM_Exported_Functions - * @{ - */ - -/** @addtogroup SRAM_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions **********************************/ -HAL_StatusTypeDef HAL_SRAM_Init(SRAM_HandleTypeDef *hsram, FMC_NORSRAM_TimingTypeDef *Timing, FMC_NORSRAM_TimingTypeDef *ExtTiming); -HAL_StatusTypeDef HAL_SRAM_DeInit(SRAM_HandleTypeDef *hsram); -void HAL_SRAM_MspInit(SRAM_HandleTypeDef *hsram); -void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef *hsram); - -void HAL_SRAM_DMA_XferCpltCallback(DMA_HandleTypeDef *hdma); -void HAL_SRAM_DMA_XferErrorCallback(DMA_HandleTypeDef *hdma); -/** - * @} - */ - -/** @addtogroup SRAM_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions *****************************************************/ -HAL_StatusTypeDef HAL_SRAM_Read_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pDstBuffer, uint32_t BufferSize); -HAL_StatusTypeDef HAL_SRAM_Write_8b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint8_t *pSrcBuffer, uint32_t BufferSize); -HAL_StatusTypeDef HAL_SRAM_Read_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pDstBuffer, uint32_t BufferSize); -HAL_StatusTypeDef HAL_SRAM_Write_16b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint16_t *pSrcBuffer, uint32_t BufferSize); -HAL_StatusTypeDef HAL_SRAM_Read_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize); -HAL_StatusTypeDef HAL_SRAM_Write_32b(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize); -HAL_StatusTypeDef HAL_SRAM_Read_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pDstBuffer, uint32_t BufferSize); -HAL_StatusTypeDef HAL_SRAM_Write_DMA(SRAM_HandleTypeDef *hsram, uint32_t *pAddress, uint32_t *pSrcBuffer, uint32_t BufferSize); -/** - * @} - */ - -/** @addtogroup SRAM_Exported_Functions_Group3 - * @{ - */ -/* SRAM Control functions ******************************************************/ -HAL_StatusTypeDef HAL_SRAM_WriteOperation_Enable(SRAM_HandleTypeDef *hsram); -HAL_StatusTypeDef HAL_SRAM_WriteOperation_Disable(SRAM_HandleTypeDef *hsram); -/** - * @} - */ - -/** @addtogroup SRAM_Exported_Functions_Group4 - * @{ - */ -/* SRAM State functions *********************************************************/ -HAL_SRAM_StateTypeDef HAL_SRAM_GetState(SRAM_HandleTypeDef *hsram); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/* Private functions ---------------------------------------------------------*/ -/** - * @} - */ - -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */ -/** - * @} - */ -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_SRAM_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h deleted file mode 100644 index a547eb9..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim.h +++ /dev/null @@ -1,1608 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_tim.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of TIM HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_TIM_H -#define __STM32F4xx_HAL_TIM_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup TIM - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup TIM_Exported_Types TIM Exported Types - * @{ - */ - -/** - * @brief TIM Time base Configuration Structure definition - */ -typedef struct -{ - uint32_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t CounterMode; /*!< Specifies the counter mode. - This parameter can be a value of @ref TIM_Counter_Mode */ - - uint32_t Period; /*!< Specifies the period value to be loaded into the active - Auto-Reload Register at the next update event. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. */ - - uint32_t ClockDivision; /*!< Specifies the clock division. - This parameter can be a value of @ref TIM_ClockDivision */ - - uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter - reaches zero, an update event is generated and counting restarts - from the RCR value (N). - This means in PWM mode that (N+1) corresponds to: - - the number of PWM periods in edge-aligned mode - - the number of half PWM period in center-aligned mode - This parameter must be a number between Min_Data = 0x00 and Max_Data = 0xFF. - @note This parameter is valid only for TIM1 and TIM8. */ -} TIM_Base_InitTypeDef; - -/** - * @brief TIM Output Compare Configuration Structure definition - */ - -typedef struct -{ - uint32_t OCMode; /*!< Specifies the TIM mode. - This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ - - uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t OCPolarity; /*!< Specifies the output polarity. - This parameter can be a value of @ref TIM_Output_Compare_Polarity */ - - uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. - This parameter can be a value of @ref TIM_Output_Compare_N_Polarity - @note This parameter is valid only for TIM1 and TIM8. */ - - uint32_t OCFastMode; /*!< Specifies the Fast mode state. - This parameter can be a value of @ref TIM_Output_Fast_State - @note This parameter is valid only in PWM1 and PWM2 mode. */ - - - uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_Idle_State - @note This parameter is valid only for TIM1 and TIM8. */ - - uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State - @note This parameter is valid only for TIM1 and TIM8. */ -} TIM_OC_InitTypeDef; - -/** - * @brief TIM One Pulse Mode Configuration Structure definition - */ -typedef struct -{ - uint32_t OCMode; /*!< Specifies the TIM mode. - This parameter can be a value of @ref TIM_Output_Compare_and_PWM_modes */ - - uint32_t Pulse; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ - - uint32_t OCPolarity; /*!< Specifies the output polarity. - This parameter can be a value of @ref TIM_Output_Compare_Polarity */ - - uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. - This parameter can be a value of @ref TIM_Output_Compare_N_Polarity - @note This parameter is valid only for TIM1 and TIM8. */ - - uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_Idle_State - @note This parameter is valid only for TIM1 and TIM8. */ - - uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. - This parameter can be a value of @ref TIM_Output_Compare_N_Idle_State - @note This parameter is valid only for TIM1 and TIM8. */ - - uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t ICSelection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t ICFilter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_OnePulse_InitTypeDef; - - -/** - * @brief TIM Input Capture Configuration Structure definition - */ - -typedef struct -{ - uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t ICSelection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t ICFilter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_IC_InitTypeDef; - -/** - * @brief TIM Encoder Configuration Structure definition - */ - -typedef struct -{ - uint32_t EncoderMode; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Encoder_Mode */ - - uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t IC1Selection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t IC1Filter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - - uint32_t IC2Polarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t IC2Selection; /*!< Specifies the input. - This parameter can be a value of @ref TIM_Input_Capture_Selection */ - - uint32_t IC2Prescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t IC2Filter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -} TIM_Encoder_InitTypeDef; - -/** - * @brief Clock Configuration Handle Structure definition - */ -typedef struct -{ - uint32_t ClockSource; /*!< TIM clock sources. - This parameter can be a value of @ref TIM_Clock_Source */ - uint32_t ClockPolarity; /*!< TIM clock polarity. - This parameter can be a value of @ref TIM_Clock_Polarity */ - uint32_t ClockPrescaler; /*!< TIM clock prescaler. - This parameter can be a value of @ref TIM_Clock_Prescaler */ - uint32_t ClockFilter; /*!< TIM clock filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -}TIM_ClockConfigTypeDef; - -/** - * @brief Clear Input Configuration Handle Structure definition - */ -typedef struct -{ - uint32_t ClearInputState; /*!< TIM clear Input state. - This parameter can be ENABLE or DISABLE */ - uint32_t ClearInputSource; /*!< TIM clear Input sources. - This parameter can be a value of @ref TIM_ClearInput_Source */ - uint32_t ClearInputPolarity; /*!< TIM Clear Input polarity. - This parameter can be a value of @ref TIM_ClearInput_Polarity */ - uint32_t ClearInputPrescaler; /*!< TIM Clear Input prescaler. - This parameter can be a value of @ref TIM_ClearInput_Prescaler */ - uint32_t ClearInputFilter; /*!< TIM Clear Input filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ -}TIM_ClearInputConfigTypeDef; - -/** - * @brief TIM Slave configuration Structure definition - */ -typedef struct { - uint32_t SlaveMode; /*!< Slave mode selection - This parameter can be a value of @ref TIM_Slave_Mode */ - uint32_t InputTrigger; /*!< Input Trigger source - This parameter can be a value of @ref TIM_Trigger_Selection */ - uint32_t TriggerPolarity; /*!< Input Trigger polarity - This parameter can be a value of @ref TIM_Trigger_Polarity */ - uint32_t TriggerPrescaler; /*!< Input trigger prescaler - This parameter can be a value of @ref TIM_Trigger_Prescaler */ - uint32_t TriggerFilter; /*!< Input trigger filter - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - -}TIM_SlaveConfigTypeDef; - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_TIM_STATE_RESET = 0x00, /*!< Peripheral not yet initialized or disabled */ - HAL_TIM_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ - HAL_TIM_STATE_BUSY = 0x02, /*!< An internal process is ongoing */ - HAL_TIM_STATE_TIMEOUT = 0x03, /*!< Timeout state */ - HAL_TIM_STATE_ERROR = 0x04 /*!< Reception process is ongoing */ -}HAL_TIM_StateTypeDef; - -/** - * @brief HAL Active channel structures definition - */ -typedef enum -{ - HAL_TIM_ACTIVE_CHANNEL_1 = 0x01, /*!< The active channel is 1 */ - HAL_TIM_ACTIVE_CHANNEL_2 = 0x02, /*!< The active channel is 2 */ - HAL_TIM_ACTIVE_CHANNEL_3 = 0x04, /*!< The active channel is 3 */ - HAL_TIM_ACTIVE_CHANNEL_4 = 0x08, /*!< The active channel is 4 */ - HAL_TIM_ACTIVE_CHANNEL_CLEARED = 0x00 /*!< All active channels cleared */ -}HAL_TIM_ActiveChannel; - -/** - * @brief TIM Time Base Handle Structure definition - */ -typedef struct -{ - TIM_TypeDef *Instance; /*!< Register base address */ - TIM_Base_InitTypeDef Init; /*!< TIM Time Base required parameters */ - HAL_TIM_ActiveChannel Channel; /*!< Active channel */ - DMA_HandleTypeDef *hdma[7]; /*!< DMA Handlers array - This array is accessed by a @ref DMA_Handle_index */ - HAL_LockTypeDef Lock; /*!< Locking object */ - __IO HAL_TIM_StateTypeDef State; /*!< TIM operation state */ -}TIM_HandleTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup TIM_Exported_Constants TIM Exported Constants - * @{ - */ - -/** @defgroup TIM_Input_Channel_Polarity TIM Input Channel Polarity - * @{ - */ -#define TIM_INPUTCHANNELPOLARITY_RISING ((uint32_t)0x00000000) /*!< Polarity for TIx source */ -#define TIM_INPUTCHANNELPOLARITY_FALLING (TIM_CCER_CC1P) /*!< Polarity for TIx source */ -#define TIM_INPUTCHANNELPOLARITY_BOTHEDGE (TIM_CCER_CC1P | TIM_CCER_CC1NP) /*!< Polarity for TIx source */ -/** - * @} - */ - -/** @defgroup TIM_ETR_Polarity TIM ETR Polarity - * @{ - */ -#define TIM_ETRPOLARITY_INVERTED (TIM_SMCR_ETP) /*!< Polarity for ETR source */ -#define TIM_ETRPOLARITY_NONINVERTED ((uint32_t)0x0000) /*!< Polarity for ETR source */ -/** - * @} - */ - -/** @defgroup TIM_ETR_Prescaler TIM ETR Prescaler - * @{ - */ -#define TIM_ETRPRESCALER_DIV1 ((uint32_t)0x0000) /*!< No prescaler is used */ -#define TIM_ETRPRESCALER_DIV2 (TIM_SMCR_ETPS_0) /*!< ETR input source is divided by 2 */ -#define TIM_ETRPRESCALER_DIV4 (TIM_SMCR_ETPS_1) /*!< ETR input source is divided by 4 */ -#define TIM_ETRPRESCALER_DIV8 (TIM_SMCR_ETPS) /*!< ETR input source is divided by 8 */ -/** - * @} - */ - -/** @defgroup TIM_Counter_Mode TIM Counter Mode - * @{ - */ -#define TIM_COUNTERMODE_UP ((uint32_t)0x0000) -#define TIM_COUNTERMODE_DOWN TIM_CR1_DIR -#define TIM_COUNTERMODE_CENTERALIGNED1 TIM_CR1_CMS_0 -#define TIM_COUNTERMODE_CENTERALIGNED2 TIM_CR1_CMS_1 -#define TIM_COUNTERMODE_CENTERALIGNED3 TIM_CR1_CMS -/** - * @} - */ - -/** @defgroup TIM_ClockDivision TIM Clock Division - * @{ - */ -#define TIM_CLOCKDIVISION_DIV1 ((uint32_t)0x0000) -#define TIM_CLOCKDIVISION_DIV2 (TIM_CR1_CKD_0) -#define TIM_CLOCKDIVISION_DIV4 (TIM_CR1_CKD_1) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_and_PWM_modes TIM Output Compare and PWM modes - * @{ - */ -#define TIM_OCMODE_TIMING ((uint32_t)0x0000) -#define TIM_OCMODE_ACTIVE (TIM_CCMR1_OC1M_0) -#define TIM_OCMODE_INACTIVE (TIM_CCMR1_OC1M_1) -#define TIM_OCMODE_TOGGLE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_1) -#define TIM_OCMODE_PWM1 (TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_2) -#define TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M) -#define TIM_OCMODE_FORCED_ACTIVE (TIM_CCMR1_OC1M_0 | TIM_CCMR1_OC1M_2) -#define TIM_OCMODE_FORCED_INACTIVE (TIM_CCMR1_OC1M_2) - -/** - * @} - */ - -/** @defgroup TIM_Output_Fast_State TIM Output Fast State - * @{ - */ -#define TIM_OCFAST_DISABLE ((uint32_t)0x0000) -#define TIM_OCFAST_ENABLE (TIM_CCMR1_OC1FE) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Polarity TIM Output Compare Polarity - * @{ - */ -#define TIM_OCPOLARITY_HIGH ((uint32_t)0x0000) -#define TIM_OCPOLARITY_LOW (TIM_CCER_CC1P) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_Polarity TIM Output CompareN Polarity - * @{ - */ -#define TIM_OCNPOLARITY_HIGH ((uint32_t)0x0000) -#define TIM_OCNPOLARITY_LOW (TIM_CCER_CC1NP) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_Idle_State TIM Output Compare Idle State - * @{ - */ -#define TIM_OCIDLESTATE_SET (TIM_CR2_OIS1) -#define TIM_OCIDLESTATE_RESET ((uint32_t)0x0000) -/** - * @} - */ - -/** @defgroup TIM_Output_Compare_N_Idle_State TIM Output Compare N Idle State - * @{ - */ -#define TIM_OCNIDLESTATE_SET (TIM_CR2_OIS1N) -#define TIM_OCNIDLESTATE_RESET ((uint32_t)0x0000) -/** - * @} - */ - -/** @defgroup TIM_Channel TIM Channel - * @{ - */ -#define TIM_CHANNEL_1 ((uint32_t)0x0000) -#define TIM_CHANNEL_2 ((uint32_t)0x0004) -#define TIM_CHANNEL_3 ((uint32_t)0x0008) -#define TIM_CHANNEL_4 ((uint32_t)0x000C) -#define TIM_CHANNEL_ALL ((uint32_t)0x0018) - -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Polarity TIM Input Capture Polarity - * @{ - */ -#define TIM_ICPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING -#define TIM_ICPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING -#define TIM_ICPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Selection TIM Input Capture Selection - * @{ - */ -#define TIM_ICSELECTION_DIRECTTI (TIM_CCMR1_CC1S_0) /*!< TIM Input 1, 2, 3 or 4 is selected to be - connected to IC1, IC2, IC3 or IC4, respectively */ -#define TIM_ICSELECTION_INDIRECTTI (TIM_CCMR1_CC1S_1) /*!< TIM Input 1, 2, 3 or 4 is selected to be - connected to IC2, IC1, IC4 or IC3, respectively */ -#define TIM_ICSELECTION_TRC (TIM_CCMR1_CC1S) /*!< TIM Input 1, 2, 3 or 4 is selected to be connected to TRC */ - -/** - * @} - */ - -/** @defgroup TIM_Input_Capture_Prescaler TIM Input Capture Prescaler - * @{ - */ -#define TIM_ICPSC_DIV1 ((uint32_t)0x0000) /*!< Capture performed each time an edge is detected on the capture input */ -#define TIM_ICPSC_DIV2 (TIM_CCMR1_IC1PSC_0) /*!< Capture performed once every 2 events */ -#define TIM_ICPSC_DIV4 (TIM_CCMR1_IC1PSC_1) /*!< Capture performed once every 4 events */ -#define TIM_ICPSC_DIV8 (TIM_CCMR1_IC1PSC) /*!< Capture performed once every 8 events */ -/** - * @} - */ - -/** @defgroup TIM_One_Pulse_Mode TIM One Pulse Mode - * @{ - */ -#define TIM_OPMODE_SINGLE (TIM_CR1_OPM) -#define TIM_OPMODE_REPETITIVE ((uint32_t)0x0000) -/** - * @} - */ - -/** @defgroup TIM_Encoder_Mode TIM Encoder Mode - * @{ - */ -#define TIM_ENCODERMODE_TI1 (TIM_SMCR_SMS_0) -#define TIM_ENCODERMODE_TI2 (TIM_SMCR_SMS_1) -#define TIM_ENCODERMODE_TI12 (TIM_SMCR_SMS_1 | TIM_SMCR_SMS_0) - -/** - * @} - */ - -/** @defgroup TIM_Interrupt_definition TIM Interrupt definition - * @{ - */ -#define TIM_IT_UPDATE (TIM_DIER_UIE) -#define TIM_IT_CC1 (TIM_DIER_CC1IE) -#define TIM_IT_CC2 (TIM_DIER_CC2IE) -#define TIM_IT_CC3 (TIM_DIER_CC3IE) -#define TIM_IT_CC4 (TIM_DIER_CC4IE) -#define TIM_IT_COM (TIM_DIER_COMIE) -#define TIM_IT_TRIGGER (TIM_DIER_TIE) -#define TIM_IT_BREAK (TIM_DIER_BIE) -/** - * @} - */ - -/** @defgroup TIM_Commutation_Source TIM Commutation Source - * @{ - */ -#define TIM_COMMUTATION_TRGI (TIM_CR2_CCUS) -#define TIM_COMMUTATION_SOFTWARE ((uint32_t)0x0000) -/** - * @} - */ - -/** @defgroup TIM_DMA_sources TIM DMA sources - * @{ - */ -#define TIM_DMA_UPDATE (TIM_DIER_UDE) -#define TIM_DMA_CC1 (TIM_DIER_CC1DE) -#define TIM_DMA_CC2 (TIM_DIER_CC2DE) -#define TIM_DMA_CC3 (TIM_DIER_CC3DE) -#define TIM_DMA_CC4 (TIM_DIER_CC4DE) -#define TIM_DMA_COM (TIM_DIER_COMDE) -#define TIM_DMA_TRIGGER (TIM_DIER_TDE) -/** - * @} - */ - -/** @defgroup TIM_Event_Source TIM Event Source - * @{ - */ -#define TIM_EVENTSOURCE_UPDATE TIM_EGR_UG -#define TIM_EVENTSOURCE_CC1 TIM_EGR_CC1G -#define TIM_EVENTSOURCE_CC2 TIM_EGR_CC2G -#define TIM_EVENTSOURCE_CC3 TIM_EGR_CC3G -#define TIM_EVENTSOURCE_CC4 TIM_EGR_CC4G -#define TIM_EVENTSOURCE_COM TIM_EGR_COMG -#define TIM_EVENTSOURCE_TRIGGER TIM_EGR_TG -#define TIM_EVENTSOURCE_BREAK TIM_EGR_BG - -/** - * @} - */ - -/** @defgroup TIM_Flag_definition TIM Flag definition - * @{ - */ -#define TIM_FLAG_UPDATE (TIM_SR_UIF) -#define TIM_FLAG_CC1 (TIM_SR_CC1IF) -#define TIM_FLAG_CC2 (TIM_SR_CC2IF) -#define TIM_FLAG_CC3 (TIM_SR_CC3IF) -#define TIM_FLAG_CC4 (TIM_SR_CC4IF) -#define TIM_FLAG_COM (TIM_SR_COMIF) -#define TIM_FLAG_TRIGGER (TIM_SR_TIF) -#define TIM_FLAG_BREAK (TIM_SR_BIF) -#define TIM_FLAG_CC1OF (TIM_SR_CC1OF) -#define TIM_FLAG_CC2OF (TIM_SR_CC2OF) -#define TIM_FLAG_CC3OF (TIM_SR_CC3OF) -#define TIM_FLAG_CC4OF (TIM_SR_CC4OF) -/** - * @} - */ - -/** @defgroup TIM_Clock_Source TIM Clock Source - * @{ - */ -#define TIM_CLOCKSOURCE_ETRMODE2 (TIM_SMCR_ETPS_1) -#define TIM_CLOCKSOURCE_INTERNAL (TIM_SMCR_ETPS_0) -#define TIM_CLOCKSOURCE_ITR0 ((uint32_t)0x0000) -#define TIM_CLOCKSOURCE_ITR1 (TIM_SMCR_TS_0) -#define TIM_CLOCKSOURCE_ITR2 (TIM_SMCR_TS_1) -#define TIM_CLOCKSOURCE_ITR3 (TIM_SMCR_TS_0 | TIM_SMCR_TS_1) -#define TIM_CLOCKSOURCE_TI1ED (TIM_SMCR_TS_2) -#define TIM_CLOCKSOURCE_TI1 (TIM_SMCR_TS_0 | TIM_SMCR_TS_2) -#define TIM_CLOCKSOURCE_TI2 (TIM_SMCR_TS_1 | TIM_SMCR_TS_2) -#define TIM_CLOCKSOURCE_ETRMODE1 (TIM_SMCR_TS) -/** - * @} - */ - -/** @defgroup TIM_Clock_Polarity TIM Clock Polarity - * @{ - */ -#define TIM_CLOCKPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx clock sources */ -#define TIM_CLOCKPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx clock sources */ -#define TIM_CLOCKPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIx clock sources */ -#define TIM_CLOCKPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIx clock sources */ -#define TIM_CLOCKPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIx clock sources */ -/** - * @} - */ - -/** @defgroup TIM_Clock_Prescaler TIM Clock Prescaler - * @{ - */ -#define TIM_CLOCKPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ -#define TIM_CLOCKPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Clock: Capture performed once every 2 events. */ -#define TIM_CLOCKPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Clock: Capture performed once every 4 events. */ -#define TIM_CLOCKPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Clock: Capture performed once every 8 events. */ -/** - * @} - */ - -/** @defgroup TIM_ClearInput_Source TIM Clear Input Source - * @{ - */ -#define TIM_CLEARINPUTSOURCE_ETR ((uint32_t)0x0001) -#define TIM_CLEARINPUTSOURCE_NONE ((uint32_t)0x0000) -/** - * @} - */ - -/** @defgroup TIM_ClearInput_Polarity TIM Clear Input Polarity - * @{ - */ -#define TIM_CLEARINPUTPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx pin */ -#define TIM_CLEARINPUTPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx pin */ -/** - * @} - */ - -/** @defgroup TIM_ClearInput_Prescaler TIM Clear Input Prescaler - * @{ - */ -#define TIM_CLEARINPUTPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ -#define TIM_CLEARINPUTPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR pin: Capture performed once every 2 events. */ -#define TIM_CLEARINPUTPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR pin: Capture performed once every 4 events. */ -#define TIM_CLEARINPUTPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR pin: Capture performed once every 8 events. */ -/** - * @} - */ - -/** @defgroup TIM_OSSR_Off_State_Selection_for_Run_mode_state TIM OSSR OffState Selection for Run mode state - * @{ - */ -#define TIM_OSSR_ENABLE (TIM_BDTR_OSSR) -#define TIM_OSSR_DISABLE ((uint32_t)0x0000) -/** - * @} - */ - -/** @defgroup TIM_OSSI_Off_State_Selection_for_Idle_mode_state TIM OSSI OffState Selection for Idle mode state - * @{ - */ -#define TIM_OSSI_ENABLE (TIM_BDTR_OSSI) -#define TIM_OSSI_DISABLE ((uint32_t)0x0000) -/** - * @} - */ - -/** @defgroup TIM_Lock_level TIM Lock level - * @{ - */ -#define TIM_LOCKLEVEL_OFF ((uint32_t)0x0000) -#define TIM_LOCKLEVEL_1 (TIM_BDTR_LOCK_0) -#define TIM_LOCKLEVEL_2 (TIM_BDTR_LOCK_1) -#define TIM_LOCKLEVEL_3 (TIM_BDTR_LOCK) -/** - * @} - */ -/** @defgroup TIM_Break_Input_enable_disable TIM Break Input State - * @{ - */ -#define TIM_BREAK_ENABLE (TIM_BDTR_BKE) -#define TIM_BREAK_DISABLE ((uint32_t)0x0000) -/** - * @} - */ - -/** @defgroup TIM_Break_Polarity TIM Break Polarity - * @{ - */ -#define TIM_BREAKPOLARITY_LOW ((uint32_t)0x0000) -#define TIM_BREAKPOLARITY_HIGH (TIM_BDTR_BKP) -/** - * @} - */ - -/** @defgroup TIM_AOE_Bit_Set_Reset TIM AOE Bit State - * @{ - */ -#define TIM_AUTOMATICOUTPUT_ENABLE (TIM_BDTR_AOE) -#define TIM_AUTOMATICOUTPUT_DISABLE ((uint32_t)0x0000) -/** - * @} - */ - -/** @defgroup TIM_Master_Mode_Selection TIM Master Mode Selection - * @{ - */ -#define TIM_TRGO_RESET ((uint32_t)0x0000) -#define TIM_TRGO_ENABLE (TIM_CR2_MMS_0) -#define TIM_TRGO_UPDATE (TIM_CR2_MMS_1) -#define TIM_TRGO_OC1 ((TIM_CR2_MMS_1 | TIM_CR2_MMS_0)) -#define TIM_TRGO_OC1REF (TIM_CR2_MMS_2) -#define TIM_TRGO_OC2REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_0)) -#define TIM_TRGO_OC3REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1)) -#define TIM_TRGO_OC4REF ((TIM_CR2_MMS_2 | TIM_CR2_MMS_1 | TIM_CR2_MMS_0)) -/** - * @} - */ - -/** @defgroup TIM_Slave_Mode TIM Slave Mode - * @{ - */ -#define TIM_SLAVEMODE_DISABLE ((uint32_t)0x0000) -#define TIM_SLAVEMODE_RESET ((uint32_t)0x0004) -#define TIM_SLAVEMODE_GATED ((uint32_t)0x0005) -#define TIM_SLAVEMODE_TRIGGER ((uint32_t)0x0006) -#define TIM_SLAVEMODE_EXTERNAL1 ((uint32_t)0x0007) -/** - * @} - */ - -/** @defgroup TIM_Master_Slave_Mode TIM Master Slave Mode - * @{ - */ -#define TIM_MASTERSLAVEMODE_ENABLE ((uint32_t)0x0080) -#define TIM_MASTERSLAVEMODE_DISABLE ((uint32_t)0x0000) -/** - * @} - */ - -/** @defgroup TIM_Trigger_Selection TIM Trigger Selection - * @{ - */ -#define TIM_TS_ITR0 ((uint32_t)0x0000) -#define TIM_TS_ITR1 ((uint32_t)0x0010) -#define TIM_TS_ITR2 ((uint32_t)0x0020) -#define TIM_TS_ITR3 ((uint32_t)0x0030) -#define TIM_TS_TI1F_ED ((uint32_t)0x0040) -#define TIM_TS_TI1FP1 ((uint32_t)0x0050) -#define TIM_TS_TI2FP2 ((uint32_t)0x0060) -#define TIM_TS_ETRF ((uint32_t)0x0070) -#define TIM_TS_NONE ((uint32_t)0xFFFF) -/** - * @} - */ - -/** @defgroup TIM_Trigger_Polarity TIM Trigger Polarity - * @{ - */ -#define TIM_TRIGGERPOLARITY_INVERTED TIM_ETRPOLARITY_INVERTED /*!< Polarity for ETRx trigger sources */ -#define TIM_TRIGGERPOLARITY_NONINVERTED TIM_ETRPOLARITY_NONINVERTED /*!< Polarity for ETRx trigger sources */ -#define TIM_TRIGGERPOLARITY_RISING TIM_INPUTCHANNELPOLARITY_RISING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ -#define TIM_TRIGGERPOLARITY_FALLING TIM_INPUTCHANNELPOLARITY_FALLING /*!< Polarity for TIxFPx or TI1_ED trigger sources */ -#define TIM_TRIGGERPOLARITY_BOTHEDGE TIM_INPUTCHANNELPOLARITY_BOTHEDGE /*!< Polarity for TIxFPx or TI1_ED trigger sources */ -/** - * @} - */ - -/** @defgroup TIM_Trigger_Prescaler TIM Trigger Prescaler - * @{ - */ -#define TIM_TRIGGERPRESCALER_DIV1 TIM_ETRPRESCALER_DIV1 /*!< No prescaler is used */ -#define TIM_TRIGGERPRESCALER_DIV2 TIM_ETRPRESCALER_DIV2 /*!< Prescaler for External ETR Trigger: Capture performed once every 2 events. */ -#define TIM_TRIGGERPRESCALER_DIV4 TIM_ETRPRESCALER_DIV4 /*!< Prescaler for External ETR Trigger: Capture performed once every 4 events. */ -#define TIM_TRIGGERPRESCALER_DIV8 TIM_ETRPRESCALER_DIV8 /*!< Prescaler for External ETR Trigger: Capture performed once every 8 events. */ -/** - * @} - */ - - -/** @defgroup TIM_TI1_Selection TIM TI1 Selection - * @{ - */ -#define TIM_TI1SELECTION_CH1 ((uint32_t)0x0000) -#define TIM_TI1SELECTION_XORCOMBINATION (TIM_CR2_TI1S) -/** - * @} - */ - -/** @defgroup TIM_DMA_Base_address TIM DMA Base address - * @{ - */ -#define TIM_DMABASE_CR1 (0x00000000) -#define TIM_DMABASE_CR2 (0x00000001) -#define TIM_DMABASE_SMCR (0x00000002) -#define TIM_DMABASE_DIER (0x00000003) -#define TIM_DMABASE_SR (0x00000004) -#define TIM_DMABASE_EGR (0x00000005) -#define TIM_DMABASE_CCMR1 (0x00000006) -#define TIM_DMABASE_CCMR2 (0x00000007) -#define TIM_DMABASE_CCER (0x00000008) -#define TIM_DMABASE_CNT (0x00000009) -#define TIM_DMABASE_PSC (0x0000000A) -#define TIM_DMABASE_ARR (0x0000000B) -#define TIM_DMABASE_RCR (0x0000000C) -#define TIM_DMABASE_CCR1 (0x0000000D) -#define TIM_DMABASE_CCR2 (0x0000000E) -#define TIM_DMABASE_CCR3 (0x0000000F) -#define TIM_DMABASE_CCR4 (0x00000010) -#define TIM_DMABASE_BDTR (0x00000011) -#define TIM_DMABASE_DCR (0x00000012) -#define TIM_DMABASE_OR (0x00000013) -/** - * @} - */ - -/** @defgroup TIM_DMA_Burst_Length TIM DMA Burst Length - * @{ - */ -#define TIM_DMABURSTLENGTH_1TRANSFER (0x00000000) -#define TIM_DMABURSTLENGTH_2TRANSFERS (0x00000100) -#define TIM_DMABURSTLENGTH_3TRANSFERS (0x00000200) -#define TIM_DMABURSTLENGTH_4TRANSFERS (0x00000300) -#define TIM_DMABURSTLENGTH_5TRANSFERS (0x00000400) -#define TIM_DMABURSTLENGTH_6TRANSFERS (0x00000500) -#define TIM_DMABURSTLENGTH_7TRANSFERS (0x00000600) -#define TIM_DMABURSTLENGTH_8TRANSFERS (0x00000700) -#define TIM_DMABURSTLENGTH_9TRANSFERS (0x00000800) -#define TIM_DMABURSTLENGTH_10TRANSFERS (0x00000900) -#define TIM_DMABURSTLENGTH_11TRANSFERS (0x00000A00) -#define TIM_DMABURSTLENGTH_12TRANSFERS (0x00000B00) -#define TIM_DMABURSTLENGTH_13TRANSFERS (0x00000C00) -#define TIM_DMABURSTLENGTH_14TRANSFERS (0x00000D00) -#define TIM_DMABURSTLENGTH_15TRANSFERS (0x00000E00) -#define TIM_DMABURSTLENGTH_16TRANSFERS (0x00000F00) -#define TIM_DMABURSTLENGTH_17TRANSFERS (0x00001000) -#define TIM_DMABURSTLENGTH_18TRANSFERS (0x00001100) -/** - * @} - */ - -/** @defgroup DMA_Handle_index DMA Handle index - * @{ - */ -#define TIM_DMA_ID_UPDATE ((uint16_t) 0x0) /*!< Index of the DMA handle used for Update DMA requests */ -#define TIM_DMA_ID_CC1 ((uint16_t) 0x1) /*!< Index of the DMA handle used for Capture/Compare 1 DMA requests */ -#define TIM_DMA_ID_CC2 ((uint16_t) 0x2) /*!< Index of the DMA handle used for Capture/Compare 2 DMA requests */ -#define TIM_DMA_ID_CC3 ((uint16_t) 0x3) /*!< Index of the DMA handle used for Capture/Compare 3 DMA requests */ -#define TIM_DMA_ID_CC4 ((uint16_t) 0x4) /*!< Index of the DMA handle used for Capture/Compare 4 DMA requests */ -#define TIM_DMA_ID_COMMUTATION ((uint16_t) 0x5) /*!< Index of the DMA handle used for Commutation DMA requests */ -#define TIM_DMA_ID_TRIGGER ((uint16_t) 0x6) /*!< Index of the DMA handle used for Trigger DMA requests */ -/** - * @} - */ - -/** @defgroup Channel_CC_State Channel CC State - * @{ - */ -#define TIM_CCx_ENABLE ((uint32_t)0x0001) -#define TIM_CCx_DISABLE ((uint32_t)0x0000) -#define TIM_CCxN_ENABLE ((uint32_t)0x0004) -#define TIM_CCxN_DISABLE ((uint32_t)0x0000) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup TIM_Exported_Macros TIM Exported Macros - * @{ - */ -/** @brief Reset TIM handle state - * @param __HANDLE__: TIM handle - * @retval None - */ -#define __HAL_TIM_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_TIM_STATE_RESET) - -/** - * @brief Enable the TIM peripheral. - * @param __HANDLE__: TIM handle - * @retval None - */ -#define __HAL_TIM_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1|=(TIM_CR1_CEN)) - -/** - * @brief Enable the TIM main Output. - * @param __HANDLE__: TIM handle - * @retval None - */ -#define __HAL_TIM_MOE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->BDTR|=(TIM_BDTR_MOE)) - - -/** - * @brief Disable the TIM peripheral. - * @param __HANDLE__: TIM handle - * @retval None - */ -#define __HAL_TIM_DISABLE(__HANDLE__) \ - do { \ - if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0) \ - { \ - if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0) \ - { \ - (__HANDLE__)->Instance->CR1 &= ~(TIM_CR1_CEN); \ - } \ - } \ - } while(0) - -/* The Main Output of a timer instance is disabled only if all the CCx and CCxN - channels have been disabled */ -/** - * @brief Disable the TIM main Output. - * @param __HANDLE__: TIM handle - * @retval None - */ -#define __HAL_TIM_MOE_DISABLE(__HANDLE__) \ - do { \ - if (((__HANDLE__)->Instance->CCER & TIM_CCER_CCxE_MASK) == 0) \ - { \ - if(((__HANDLE__)->Instance->CCER & TIM_CCER_CCxNE_MASK) == 0) \ - { \ - (__HANDLE__)->Instance->BDTR &= ~(TIM_BDTR_MOE); \ - } \ - } \ - } while(0) - -#define __HAL_TIM_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER |= (__INTERRUPT__)) -#define __HAL_TIM_ENABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER |= (__DMA__)) -#define __HAL_TIM_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->DIER &= ~(__INTERRUPT__)) -#define __HAL_TIM_DISABLE_DMA(__HANDLE__, __DMA__) ((__HANDLE__)->Instance->DIER &= ~(__DMA__)) -#define __HAL_TIM_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR &(__FLAG__)) == (__FLAG__)) -#define __HAL_TIM_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) - -#define __HAL_TIM_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) ((((__HANDLE__)->Instance->DIER & (__INTERRUPT__)) == (__INTERRUPT__)) ? SET : RESET) -#define __HAL_TIM_CLEAR_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->SR = ~(__INTERRUPT__)) - -#define __HAL_TIM_IS_TIM_COUNTING_DOWN(__HANDLE__) (((__HANDLE__)->Instance->CR1 &(TIM_CR1_DIR)) == (TIM_CR1_DIR)) -#define __HAL_TIM_SET_PRESCALER(__HANDLE__, __PRESC__) ((__HANDLE__)->Instance->PSC = (__PRESC__)) - -#define TIM_SET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__, __ICPSC__) \ -(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 |= (__ICPSC__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 |= ((__ICPSC__) << 8)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 |= (__ICPSC__)) :\ - ((__HANDLE__)->Instance->CCMR2 |= ((__ICPSC__) << 8))) - -#define TIM_RESET_ICPRESCALERVALUE(__HANDLE__, __CHANNEL__) \ -(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC1PSC) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCMR1 &= (uint16_t)~TIM_CCMR1_IC2PSC) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC3PSC) :\ - ((__HANDLE__)->Instance->CCMR2 &= (uint16_t)~TIM_CCMR2_IC4PSC)) - -#define TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ -(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER |= (__POLARITY__)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 4)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER |= ((__POLARITY__) << 8)) :\ - ((__HANDLE__)->Instance->CCER |= (((__POLARITY__) << 12) & TIM_CCER_CC4P))) - -#define TIM_RESET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__) \ -(((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC1P | TIM_CCER_CC1NP)) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC2P | TIM_CCER_CC2NP)) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCER &= (uint16_t)~(TIM_CCER_CC3P | TIM_CCER_CC3NP)) :\ - ((__HANDLE__)->Instance->CCER &= (uint16_t)~TIM_CCER_CC4P)) - -/** - * @brief Sets the TIM Capture Compare Register value on runtime without - * calling another time ConfigChannel function. - * @param __HANDLE__: TIM handle. - * @param __CHANNEL__ : TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param __COMPARE__: specifies the Capture Compare register new value. - * @retval None - */ -#define __HAL_TIM_SET_COMPARE(__HANDLE__, __CHANNEL__, __COMPARE__) \ -(*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2)) = (__COMPARE__)) - -/** - * @brief Gets the TIM Capture Compare Register value on runtime - * @param __HANDLE__: TIM handle. - * @param __CHANNEL__ : TIM Channel associated with the capture compare register - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: get capture/compare 1 register value - * @arg TIM_CHANNEL_2: get capture/compare 2 register value - * @arg TIM_CHANNEL_3: get capture/compare 3 register value - * @arg TIM_CHANNEL_4: get capture/compare 4 register value - * @retval None - */ -#define __HAL_TIM_GET_COMPARE(__HANDLE__, __CHANNEL__) \ - (*(__IO uint32_t *)(&((__HANDLE__)->Instance->CCR1) + ((__CHANNEL__) >> 2))) - -/** - * @brief Sets the TIM Counter Register value on runtime. - * @param __HANDLE__: TIM handle. - * @param __COUNTER__: specifies the Counter register new value. - * @retval None - */ -#define __HAL_TIM_SET_COUNTER(__HANDLE__, __COUNTER__) ((__HANDLE__)->Instance->CNT = (__COUNTER__)) - -/** - * @brief Gets the TIM Counter Register value on runtime. - * @param __HANDLE__: TIM handle. - * @retval None - */ -#define __HAL_TIM_GET_COUNTER(__HANDLE__) ((__HANDLE__)->Instance->CNT) - -/** - * @brief Sets the TIM Autoreload Register value on runtime without calling - * another time any Init function. - * @param __HANDLE__: TIM handle. - * @param __AUTORELOAD__: specifies the Counter register new value. - * @retval None - */ -#define __HAL_TIM_SET_AUTORELOAD(__HANDLE__, __AUTORELOAD__) \ - do{ \ - (__HANDLE__)->Instance->ARR = (__AUTORELOAD__); \ - (__HANDLE__)->Init.Period = (__AUTORELOAD__); \ - } while(0) -/** - * @brief Gets the TIM Autoreload Register value on runtime - * @param __HANDLE__: TIM handle. - * @retval None - */ -#define __HAL_TIM_GET_AUTORELOAD(__HANDLE__) ((__HANDLE__)->Instance->ARR) - -/** - * @brief Sets the TIM Clock Division value on runtime without calling - * another time any Init function. - * @param __HANDLE__: TIM handle. - * @param __CKD__: specifies the clock division value. - * This parameter can be one of the following value: - * @arg TIM_CLOCKDIVISION_DIV1 - * @arg TIM_CLOCKDIVISION_DIV2 - * @arg TIM_CLOCKDIVISION_DIV4 - * @retval None - */ -#define __HAL_TIM_SET_CLOCKDIVISION(__HANDLE__, __CKD__) \ - do{ \ - (__HANDLE__)->Instance->CR1 &= (uint16_t)(~TIM_CR1_CKD); \ - (__HANDLE__)->Instance->CR1 |= (__CKD__); \ - (__HANDLE__)->Init.ClockDivision = (__CKD__); \ - } while(0) -/** - * @brief Gets the TIM Clock Division value on runtime - * @param __HANDLE__: TIM handle. - * @retval None - */ -#define __HAL_TIM_GET_CLOCKDIVISION(__HANDLE__) ((__HANDLE__)->Instance->CR1 & TIM_CR1_CKD) - -/** - * @brief Sets the TIM Input Capture prescaler on runtime without calling - * another time HAL_TIM_IC_ConfigChannel() function. - * @param __HANDLE__: TIM handle. - * @param __CHANNEL__ : TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param __ICPSC__: specifies the Input Capture4 prescaler new value. - * This parameter can be one of the following values: - * @arg TIM_ICPSC_DIV1: no prescaler - * @arg TIM_ICPSC_DIV2: capture is done once every 2 events - * @arg TIM_ICPSC_DIV4: capture is done once every 4 events - * @arg TIM_ICPSC_DIV8: capture is done once every 8 events - * @retval None - */ -#define __HAL_TIM_SET_ICPRESCALER(__HANDLE__, __CHANNEL__, __ICPSC__) \ - do{ \ - TIM_RESET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__)); \ - TIM_SET_ICPRESCALERVALUE((__HANDLE__), (__CHANNEL__), (__ICPSC__)); \ - } while(0) - -/** - * @brief Gets the TIM Input Capture prescaler on runtime - * @param __HANDLE__: TIM handle. - * @param __CHANNEL__ : TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: get input capture 1 prescaler value - * @arg TIM_CHANNEL_2: get input capture 2 prescaler value - * @arg TIM_CHANNEL_3: get input capture 3 prescaler value - * @arg TIM_CHANNEL_4: get input capture 4 prescaler value - * @retval None - */ -#define __HAL_TIM_GET_ICPRESCALER(__HANDLE__, __CHANNEL__) \ - (((__CHANNEL__) == TIM_CHANNEL_1) ? ((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC1PSC) :\ - ((__CHANNEL__) == TIM_CHANNEL_2) ? (((__HANDLE__)->Instance->CCMR1 & TIM_CCMR1_IC2PSC) >> 8) :\ - ((__CHANNEL__) == TIM_CHANNEL_3) ? ((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC3PSC) :\ - (((__HANDLE__)->Instance->CCMR2 & TIM_CCMR2_IC4PSC)) >> 8) - -/** - * @brief Set the Update Request Source (URS) bit of the TIMx_CR1 register - * @param __HANDLE__: TIM handle. - * @note When the USR bit of the TIMx_CR1 register is set, only counter - * overflow/underflow generates an update interrupt or DMA request (if - * enabled) - * @retval None - */ -#define __HAL_TIM_URS_ENABLE(__HANDLE__) \ - ((__HANDLE__)->Instance->CR1|= (TIM_CR1_URS)) - -/** - * @brief Reset the Update Request Source (URS) bit of the TIMx_CR1 register - * @param __HANDLE__: TIM handle. - * @note When the USR bit of the TIMx_CR1 register is reset, any of the - * following events generate an update interrupt or DMA request (if - * enabled): - * – Counter overflow/underflow - * – Setting the UG bit - * – Update generation through the slave mode controller - * @retval None - */ -#define __HAL_TIM_URS_DISABLE(__HANDLE__) \ - ((__HANDLE__)->Instance->CR1&=~(TIM_CR1_URS)) - -/** - * @brief Sets the TIM Capture x input polarity on runtime. - * @param __HANDLE__: TIM handle. - * @param __CHANNEL__: TIM Channels to be configured. - * This parameter can be one of the following values: - * @arg TIM_CHANNEL_1: TIM Channel 1 selected - * @arg TIM_CHANNEL_2: TIM Channel 2 selected - * @arg TIM_CHANNEL_3: TIM Channel 3 selected - * @arg TIM_CHANNEL_4: TIM Channel 4 selected - * @param __POLARITY__: Polarity for TIx source - * @arg TIM_INPUTCHANNELPOLARITY_RISING: Rising Edge - * @arg TIM_INPUTCHANNELPOLARITY_FALLING: Falling Edge - * @arg TIM_INPUTCHANNELPOLARITY_BOTHEDGE: Rising and Falling Edge - * @note The polarity TIM_INPUTCHANNELPOLARITY_BOTHEDGE is not authorized for TIM Channel 4. - * @retval None - */ -#define __HAL_TIM_SET_CAPTUREPOLARITY(__HANDLE__, __CHANNEL__, __POLARITY__) \ - do{ \ - TIM_RESET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__)); \ - TIM_SET_CAPTUREPOLARITY((__HANDLE__), (__CHANNEL__), (__POLARITY__)); \ - }while(0) -/** - * @} - */ - -/* Include TIM HAL Extension module */ -#include "stm32f4xx_hal_tim_ex.h" - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup TIM_Exported_Functions - * @{ - */ - -/** @addtogroup TIM_Exported_Functions_Group1 - * @{ - */ - -/* Time Base functions ********************************************************/ -HAL_StatusTypeDef HAL_TIM_Base_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_Base_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Base_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_Base_Start(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_Base_Stop(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_Base_Start_IT(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_Base_Stop_IT(TIM_HandleTypeDef *htim); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_Base_Start_DMA(TIM_HandleTypeDef *htim, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_Base_Stop_DMA(TIM_HandleTypeDef *htim); -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group2 - * @{ - */ -/* Timer Output Compare functions **********************************************/ -HAL_StatusTypeDef HAL_TIM_OC_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_OC_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OC_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OC_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_OC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_OC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_OC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_OC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_OC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_OC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); - -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group3 - * @{ - */ -/* Timer PWM functions *********************************************************/ -HAL_StatusTypeDef HAL_TIM_PWM_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_PWM_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_PWM_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_PWM_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_PWM_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_PWM_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_PWM_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); - -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group4 - * @{ - */ -/* Timer Input Capture functions ***********************************************/ -HAL_StatusTypeDef HAL_TIM_IC_Init(TIM_HandleTypeDef *htim); -HAL_StatusTypeDef HAL_TIM_IC_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_IC_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_IC_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_IC_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_IC_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_IC_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_IC_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); - -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group5 - * @{ - */ -/* Timer One Pulse functions ***************************************************/ -HAL_StatusTypeDef HAL_TIM_OnePulse_Init(TIM_HandleTypeDef *htim, uint32_t OnePulseMode); -HAL_StatusTypeDef HAL_TIM_OnePulse_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OnePulse_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_OnePulse_MspDeInit(TIM_HandleTypeDef *htim); -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop(TIM_HandleTypeDef *htim, uint32_t OutputChannel); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_OnePulse_Start_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIM_OnePulse_Stop_IT(TIM_HandleTypeDef *htim, uint32_t OutputChannel); - -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group6 - * @{ - */ -/* Timer Encoder functions *****************************************************/ -HAL_StatusTypeDef HAL_TIM_Encoder_Init(TIM_HandleTypeDef *htim, TIM_Encoder_InitTypeDef* sConfig); -HAL_StatusTypeDef HAL_TIM_Encoder_DeInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Encoder_MspInit(TIM_HandleTypeDef *htim); -void HAL_TIM_Encoder_MspDeInit(TIM_HandleTypeDef *htim); - /* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_Encoder_Stop(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_IT(TIM_HandleTypeDef *htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIM_Encoder_Start_DMA(TIM_HandleTypeDef *htim, uint32_t Channel, uint32_t *pData1, uint32_t *pData2, uint16_t Length); -HAL_StatusTypeDef HAL_TIM_Encoder_Stop_DMA(TIM_HandleTypeDef *htim, uint32_t Channel); - -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group7 - * @{ - */ -/* Interrupt Handler functions **********************************************/ -void HAL_TIM_IRQHandler(TIM_HandleTypeDef *htim); - -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group8 - * @{ - */ -/* Control functions *********************************************************/ -HAL_StatusTypeDef HAL_TIM_OC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_PWM_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OC_InitTypeDef* sConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_IC_ConfigChannel(TIM_HandleTypeDef *htim, TIM_IC_InitTypeDef* sConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_OnePulse_ConfigChannel(TIM_HandleTypeDef *htim, TIM_OnePulse_InitTypeDef* sConfig, uint32_t OutputChannel, uint32_t InputChannel); -HAL_StatusTypeDef HAL_TIM_ConfigOCrefClear(TIM_HandleTypeDef *htim, TIM_ClearInputConfigTypeDef * sClearInputConfig, uint32_t Channel); -HAL_StatusTypeDef HAL_TIM_ConfigClockSource(TIM_HandleTypeDef *htim, TIM_ClockConfigTypeDef * sClockSourceConfig); -HAL_StatusTypeDef HAL_TIM_ConfigTI1Input(TIM_HandleTypeDef *htim, uint32_t TI1_Selection); -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig); -HAL_StatusTypeDef HAL_TIM_SlaveConfigSynchronization_IT(TIM_HandleTypeDef *htim, TIM_SlaveConfigTypeDef * sSlaveConfig); -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \ - uint32_t *BurstBuffer, uint32_t BurstLength); -HAL_StatusTypeDef HAL_TIM_DMABurst_WriteStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStart(TIM_HandleTypeDef *htim, uint32_t BurstBaseAddress, uint32_t BurstRequestSrc, \ - uint32_t *BurstBuffer, uint32_t BurstLength); -HAL_StatusTypeDef HAL_TIM_DMABurst_ReadStop(TIM_HandleTypeDef *htim, uint32_t BurstRequestSrc); -HAL_StatusTypeDef HAL_TIM_GenerateEvent(TIM_HandleTypeDef *htim, uint32_t EventSource); -uint32_t HAL_TIM_ReadCapturedValue(TIM_HandleTypeDef *htim, uint32_t Channel); - -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group9 - * @{ - */ -/* Callback in non blocking modes (Interrupt and DMA) *************************/ -void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_OC_DelayElapsedCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_IC_CaptureCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_PWM_PulseFinishedCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_TriggerCallback(TIM_HandleTypeDef *htim); -void HAL_TIM_ErrorCallback(TIM_HandleTypeDef *htim); - -/** - * @} - */ - -/** @addtogroup TIM_Exported_Functions_Group10 - * @{ - */ -/* Peripheral State functions **************************************************/ -HAL_TIM_StateTypeDef HAL_TIM_Base_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_OC_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_PWM_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_IC_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_OnePulse_GetState(TIM_HandleTypeDef *htim); -HAL_TIM_StateTypeDef HAL_TIM_Encoder_GetState(TIM_HandleTypeDef *htim); - -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup TIM_Private_Macros TIM Private Macros - * @{ - */ - -/** @defgroup TIM_IS_TIM_Definitions TIM Private macros to check input parameters - * @{ - */ -#define IS_TIM_COUNTER_MODE(MODE) (((MODE) == TIM_COUNTERMODE_UP) || \ - ((MODE) == TIM_COUNTERMODE_DOWN) || \ - ((MODE) == TIM_COUNTERMODE_CENTERALIGNED1) || \ - ((MODE) == TIM_COUNTERMODE_CENTERALIGNED2) || \ - ((MODE) == TIM_COUNTERMODE_CENTERALIGNED3)) - -#define IS_TIM_CLOCKDIVISION_DIV(DIV) (((DIV) == TIM_CLOCKDIVISION_DIV1) || \ - ((DIV) == TIM_CLOCKDIVISION_DIV2) || \ - ((DIV) == TIM_CLOCKDIVISION_DIV4)) - -#define IS_TIM_PWM_MODE(MODE) (((MODE) == TIM_OCMODE_PWM1) || \ - ((MODE) == TIM_OCMODE_PWM2)) - -#define IS_TIM_OC_MODE(MODE) (((MODE) == TIM_OCMODE_TIMING) || \ - ((MODE) == TIM_OCMODE_ACTIVE) || \ - ((MODE) == TIM_OCMODE_INACTIVE) || \ - ((MODE) == TIM_OCMODE_TOGGLE) || \ - ((MODE) == TIM_OCMODE_FORCED_ACTIVE) || \ - ((MODE) == TIM_OCMODE_FORCED_INACTIVE)) - -#define IS_TIM_FAST_STATE(STATE) (((STATE) == TIM_OCFAST_DISABLE) || \ - ((STATE) == TIM_OCFAST_ENABLE)) - -#define IS_TIM_OC_POLARITY(POLARITY) (((POLARITY) == TIM_OCPOLARITY_HIGH) || \ - ((POLARITY) == TIM_OCPOLARITY_LOW)) - -#define IS_TIM_OCN_POLARITY(POLARITY) (((POLARITY) == TIM_OCNPOLARITY_HIGH) || \ - ((POLARITY) == TIM_OCNPOLARITY_LOW)) - -#define IS_TIM_OCIDLE_STATE(STATE) (((STATE) == TIM_OCIDLESTATE_SET) || \ - ((STATE) == TIM_OCIDLESTATE_RESET)) - -#define IS_TIM_OCNIDLE_STATE(STATE) (((STATE) == TIM_OCNIDLESTATE_SET) || \ - ((STATE) == TIM_OCNIDLESTATE_RESET)) - -#define IS_TIM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \ - ((CHANNEL) == TIM_CHANNEL_2) || \ - ((CHANNEL) == TIM_CHANNEL_3) || \ - ((CHANNEL) == TIM_CHANNEL_4) || \ - ((CHANNEL) == TIM_CHANNEL_ALL)) - -#define IS_TIM_OPM_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \ - ((CHANNEL) == TIM_CHANNEL_2)) - -#define IS_TIM_COMPLEMENTARY_CHANNELS(CHANNEL) (((CHANNEL) == TIM_CHANNEL_1) || \ - ((CHANNEL) == TIM_CHANNEL_2) || \ - ((CHANNEL) == TIM_CHANNEL_3)) - -#define IS_TIM_IC_POLARITY(POLARITY) (((POLARITY) == TIM_ICPOLARITY_RISING) || \ - ((POLARITY) == TIM_ICPOLARITY_FALLING) || \ - ((POLARITY) == TIM_ICPOLARITY_BOTHEDGE)) - -#define IS_TIM_IC_SELECTION(SELECTION) (((SELECTION) == TIM_ICSELECTION_DIRECTTI) || \ - ((SELECTION) == TIM_ICSELECTION_INDIRECTTI) || \ - ((SELECTION) == TIM_ICSELECTION_TRC)) - -#define IS_TIM_IC_PRESCALER(PRESCALER) (((PRESCALER) == TIM_ICPSC_DIV1) || \ - ((PRESCALER) == TIM_ICPSC_DIV2) || \ - ((PRESCALER) == TIM_ICPSC_DIV4) || \ - ((PRESCALER) == TIM_ICPSC_DIV8)) - -#define IS_TIM_OPM_MODE(MODE) (((MODE) == TIM_OPMODE_SINGLE) || \ - ((MODE) == TIM_OPMODE_REPETITIVE)) - -#define IS_TIM_DMA_SOURCE(SOURCE) ((((SOURCE) & 0xFFFF80FF) == 0x00000000) && ((SOURCE) != 0x00000000)) - -#define IS_TIM_ENCODER_MODE(MODE) (((MODE) == TIM_ENCODERMODE_TI1) || \ - ((MODE) == TIM_ENCODERMODE_TI2) || \ - ((MODE) == TIM_ENCODERMODE_TI12)) - -#define IS_TIM_EVENT_SOURCE(SOURCE) ((((SOURCE) & 0xFFFFFF00) == 0x00000000) && ((SOURCE) != 0x00000000)) - -#define IS_TIM_CLOCKSOURCE(CLOCK) (((CLOCK) == TIM_CLOCKSOURCE_INTERNAL) || \ - ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE2) || \ - ((CLOCK) == TIM_CLOCKSOURCE_ITR0) || \ - ((CLOCK) == TIM_CLOCKSOURCE_ITR1) || \ - ((CLOCK) == TIM_CLOCKSOURCE_ITR2) || \ - ((CLOCK) == TIM_CLOCKSOURCE_ITR3) || \ - ((CLOCK) == TIM_CLOCKSOURCE_TI1ED) || \ - ((CLOCK) == TIM_CLOCKSOURCE_TI1) || \ - ((CLOCK) == TIM_CLOCKSOURCE_TI2) || \ - ((CLOCK) == TIM_CLOCKSOURCE_ETRMODE1)) - -#define IS_TIM_CLOCKPOLARITY(POLARITY) (((POLARITY) == TIM_CLOCKPOLARITY_INVERTED) || \ - ((POLARITY) == TIM_CLOCKPOLARITY_NONINVERTED) || \ - ((POLARITY) == TIM_CLOCKPOLARITY_RISING) || \ - ((POLARITY) == TIM_CLOCKPOLARITY_FALLING) || \ - ((POLARITY) == TIM_CLOCKPOLARITY_BOTHEDGE)) - -#define IS_TIM_CLOCKPRESCALER(PRESCALER) (((PRESCALER) == TIM_CLOCKPRESCALER_DIV1) || \ - ((PRESCALER) == TIM_CLOCKPRESCALER_DIV2) || \ - ((PRESCALER) == TIM_CLOCKPRESCALER_DIV4) || \ - ((PRESCALER) == TIM_CLOCKPRESCALER_DIV8)) - -#define IS_TIM_CLOCKFILTER(ICFILTER) ((ICFILTER) <= 0xF) - -#define IS_TIM_CLEARINPUT_SOURCE(SOURCE) (((SOURCE) == TIM_CLEARINPUTSOURCE_NONE) || \ - ((SOURCE) == TIM_CLEARINPUTSOURCE_ETR)) - -#define IS_TIM_CLEARINPUT_POLARITY(POLARITY) (((POLARITY) == TIM_CLEARINPUTPOLARITY_INVERTED) || \ - ((POLARITY) == TIM_CLEARINPUTPOLARITY_NONINVERTED)) - -#define IS_TIM_CLEARINPUT_PRESCALER(PRESCALER) (((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV1) || \ - ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV2) || \ - ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV4) || \ - ((PRESCALER) == TIM_CLEARINPUTPRESCALER_DIV8)) - -#define IS_TIM_CLEARINPUT_FILTER(ICFILTER) ((ICFILTER) <= 0xF) - -#define IS_TIM_OSSR_STATE(STATE) (((STATE) == TIM_OSSR_ENABLE) || \ - ((STATE) == TIM_OSSR_DISABLE)) - -#define IS_TIM_OSSI_STATE(STATE) (((STATE) == TIM_OSSI_ENABLE) || \ - ((STATE) == TIM_OSSI_DISABLE)) - -#define IS_TIM_LOCK_LEVEL(LEVEL) (((LEVEL) == TIM_LOCKLEVEL_OFF) || \ - ((LEVEL) == TIM_LOCKLEVEL_1) || \ - ((LEVEL) == TIM_LOCKLEVEL_2) || \ - ((LEVEL) == TIM_LOCKLEVEL_3)) - -#define IS_TIM_BREAK_STATE(STATE) (((STATE) == TIM_BREAK_ENABLE) || \ - ((STATE) == TIM_BREAK_DISABLE)) - -#define IS_TIM_BREAK_POLARITY(POLARITY) (((POLARITY) == TIM_BREAKPOLARITY_LOW) || \ - ((POLARITY) == TIM_BREAKPOLARITY_HIGH)) - -#define IS_TIM_AUTOMATIC_OUTPUT_STATE(STATE) (((STATE) == TIM_AUTOMATICOUTPUT_ENABLE) || \ - ((STATE) == TIM_AUTOMATICOUTPUT_DISABLE)) - -#define IS_TIM_TRGO_SOURCE(SOURCE) (((SOURCE) == TIM_TRGO_RESET) || \ - ((SOURCE) == TIM_TRGO_ENABLE) || \ - ((SOURCE) == TIM_TRGO_UPDATE) || \ - ((SOURCE) == TIM_TRGO_OC1) || \ - ((SOURCE) == TIM_TRGO_OC1REF) || \ - ((SOURCE) == TIM_TRGO_OC2REF) || \ - ((SOURCE) == TIM_TRGO_OC3REF) || \ - ((SOURCE) == TIM_TRGO_OC4REF)) - -#define IS_TIM_SLAVE_MODE(MODE) (((MODE) == TIM_SLAVEMODE_DISABLE) || \ - ((MODE) == TIM_SLAVEMODE_GATED) || \ - ((MODE) == TIM_SLAVEMODE_RESET) || \ - ((MODE) == TIM_SLAVEMODE_TRIGGER) || \ - ((MODE) == TIM_SLAVEMODE_EXTERNAL1)) - -#define IS_TIM_MSM_STATE(STATE) (((STATE) == TIM_MASTERSLAVEMODE_ENABLE) || \ - ((STATE) == TIM_MASTERSLAVEMODE_DISABLE)) - -#define IS_TIM_TRIGGER_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ - ((SELECTION) == TIM_TS_ITR1) || \ - ((SELECTION) == TIM_TS_ITR2) || \ - ((SELECTION) == TIM_TS_ITR3) || \ - ((SELECTION) == TIM_TS_TI1F_ED) || \ - ((SELECTION) == TIM_TS_TI1FP1) || \ - ((SELECTION) == TIM_TS_TI2FP2) || \ - ((SELECTION) == TIM_TS_ETRF)) - -#define IS_TIM_INTERNAL_TRIGGEREVENT_SELECTION(SELECTION) (((SELECTION) == TIM_TS_ITR0) || \ - ((SELECTION) == TIM_TS_ITR1) || \ - ((SELECTION) == TIM_TS_ITR2) || \ - ((SELECTION) == TIM_TS_ITR3) || \ - ((SELECTION) == TIM_TS_NONE)) -#define IS_TIM_TRIGGERPOLARITY(POLARITY) (((POLARITY) == TIM_TRIGGERPOLARITY_INVERTED ) || \ - ((POLARITY) == TIM_TRIGGERPOLARITY_NONINVERTED) || \ - ((POLARITY) == TIM_TRIGGERPOLARITY_RISING ) || \ - ((POLARITY) == TIM_TRIGGERPOLARITY_FALLING ) || \ - ((POLARITY) == TIM_TRIGGERPOLARITY_BOTHEDGE )) - -#define IS_TIM_TRIGGERPRESCALER(PRESCALER) (((PRESCALER) == TIM_TRIGGERPRESCALER_DIV1) || \ - ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV2) || \ - ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV4) || \ - ((PRESCALER) == TIM_TRIGGERPRESCALER_DIV8)) - -#define IS_TIM_TRIGGERFILTER(ICFILTER) ((ICFILTER) <= 0xF) - -#define IS_TIM_TI1SELECTION(TI1SELECTION) (((TI1SELECTION) == TIM_TI1SELECTION_CH1) || \ - ((TI1SELECTION) == TIM_TI1SELECTION_XORCOMBINATION)) - -#define IS_TIM_DMA_BASE(BASE) (((BASE) == TIM_DMABASE_CR1) || \ - ((BASE) == TIM_DMABASE_CR2) || \ - ((BASE) == TIM_DMABASE_SMCR) || \ - ((BASE) == TIM_DMABASE_DIER) || \ - ((BASE) == TIM_DMABASE_SR) || \ - ((BASE) == TIM_DMABASE_EGR) || \ - ((BASE) == TIM_DMABASE_CCMR1) || \ - ((BASE) == TIM_DMABASE_CCMR2) || \ - ((BASE) == TIM_DMABASE_CCER) || \ - ((BASE) == TIM_DMABASE_CNT) || \ - ((BASE) == TIM_DMABASE_PSC) || \ - ((BASE) == TIM_DMABASE_ARR) || \ - ((BASE) == TIM_DMABASE_RCR) || \ - ((BASE) == TIM_DMABASE_CCR1) || \ - ((BASE) == TIM_DMABASE_CCR2) || \ - ((BASE) == TIM_DMABASE_CCR3) || \ - ((BASE) == TIM_DMABASE_CCR4) || \ - ((BASE) == TIM_DMABASE_BDTR) || \ - ((BASE) == TIM_DMABASE_DCR) || \ - ((BASE) == TIM_DMABASE_OR)) - -#define IS_TIM_DMA_LENGTH(LENGTH) (((LENGTH) == TIM_DMABURSTLENGTH_1TRANSFER) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_2TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_3TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_4TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_5TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_6TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_7TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_8TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_9TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_10TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_11TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_12TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_13TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_14TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_15TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_16TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_17TRANSFERS) || \ - ((LENGTH) == TIM_DMABURSTLENGTH_18TRANSFERS)) - -#define IS_TIM_IC_FILTER(ICFILTER) ((ICFILTER) <= 0xF) -/** - * @} - */ - -/** @defgroup TIM_Mask_Definitions TIM Mask Definition - * @{ - */ -/* The counter of a timer instance is disabled only if all the CCx and CCxN - channels have been disabled */ -#define TIM_CCER_CCxE_MASK ((uint32_t)(TIM_CCER_CC1E | TIM_CCER_CC2E | TIM_CCER_CC3E | TIM_CCER_CC4E)) -#define TIM_CCER_CCxNE_MASK ((uint32_t)(TIM_CCER_CC1NE | TIM_CCER_CC2NE | TIM_CCER_CC3NE)) -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup TIM_Private_Functions TIM Private Functions - * @{ - */ -void TIM_Base_SetConfig(TIM_TypeDef *TIMx, TIM_Base_InitTypeDef *Structure); -void TIM_TI1_SetConfig(TIM_TypeDef *TIMx, uint32_t TIM_ICPolarity, uint32_t TIM_ICSelection, uint32_t TIM_ICFilter); -void TIM_OC2_SetConfig(TIM_TypeDef *TIMx, TIM_OC_InitTypeDef *OC_Config); -void TIM_DMADelayPulseCplt(DMA_HandleTypeDef *hdma); -void TIM_DMAError(DMA_HandleTypeDef *hdma); -void TIM_DMACaptureCplt(DMA_HandleTypeDef *hdma); -void TIM_CCxChannelCmd(TIM_TypeDef* TIMx, uint32_t Channel, uint32_t ChannelState); -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_TIM_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h deleted file mode 100644 index 2b6c184..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_tim_ex.h +++ /dev/null @@ -1,325 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_tim_ex.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of TIM HAL Extension module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_TIM_EX_H -#define __STM32F4xx_HAL_TIM_EX_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup TIMEx - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup TIMEx_Exported_Types TIM Exported Types - * @{ - */ - -/** - * @brief TIM Hall sensor Configuration Structure definition - */ - -typedef struct -{ - - uint32_t IC1Polarity; /*!< Specifies the active edge of the input signal. - This parameter can be a value of @ref TIM_Input_Capture_Polarity */ - - uint32_t IC1Prescaler; /*!< Specifies the Input Capture Prescaler. - This parameter can be a value of @ref TIM_Input_Capture_Prescaler */ - - uint32_t IC1Filter; /*!< Specifies the input capture filter. - This parameter can be a number between Min_Data = 0x0 and Max_Data = 0xF */ - uint32_t Commutation_Delay; /*!< Specifies the pulse value to be loaded into the Capture Compare Register. - This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF */ -} TIM_HallSensor_InitTypeDef; - -/** - * @brief TIM Master configuration Structure definition - */ -typedef struct { - uint32_t MasterOutputTrigger; /*!< Trigger output (TRGO) selection. - This parameter can be a value of @ref TIM_Master_Mode_Selection */ - uint32_t MasterSlaveMode; /*!< Master/slave mode selection. - This parameter can be a value of @ref TIM_Master_Slave_Mode */ -}TIM_MasterConfigTypeDef; - -/** - * @brief TIM Break and Dead time configuration Structure definition - */ -typedef struct -{ - uint32_t OffStateRunMode; /*!< TIM off state in run mode. - This parameter can be a value of @ref TIM_OSSR_Off_State_Selection_for_Run_mode_state */ - uint32_t OffStateIDLEMode; /*!< TIM off state in IDLE mode. - This parameter can be a value of @ref TIM_OSSI_Off_State_Selection_for_Idle_mode_state */ - uint32_t LockLevel; /*!< TIM Lock level. - This parameter can be a value of @ref TIM_Lock_level */ - uint32_t DeadTime; /*!< TIM dead Time. - This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF */ - uint32_t BreakState; /*!< TIM Break State. - This parameter can be a value of @ref TIM_Break_Input_enable_disable */ - uint32_t BreakPolarity; /*!< TIM Break input polarity. - This parameter can be a value of @ref TIM_Break_Polarity */ - uint32_t AutomaticOutput; /*!< TIM Automatic Output Enable state. - This parameter can be a value of @ref TIM_AOE_Bit_Set_Reset */ -}TIM_BreakDeadTimeConfigTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup TIMEx_Exported_Constants TIM Exported Constants - * @{ - */ - -/** @defgroup TIMEx_Remap TIM Remap - * @{ - */ -#define TIM_TIM2_TIM8_TRGO (0x00000000) -#define TIM_TIM2_ETH_PTP (0x00000400) -#define TIM_TIM2_USBFS_SOF (0x00000800) -#define TIM_TIM2_USBHS_SOF (0x00000C00) -#define TIM_TIM5_GPIO (0x00000000) -#define TIM_TIM5_LSI (0x00000040) -#define TIM_TIM5_LSE (0x00000080) -#define TIM_TIM5_RTC (0x000000C0) -#define TIM_TIM11_GPIO (0x00000000) -#define TIM_TIM11_HSE (0x00000002) - -#if defined (STM32F446xx) -#define TIM_TIM11_SPDIFRX (0x00000001) -#endif /* STM32F446xx */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup TIMEx_Exported_Functions - * @{ - */ - -/** @addtogroup TIMEx_Exported_Functions_Group1 - * @{ - */ -/* Timer Hall Sensor functions **********************************************/ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Init(TIM_HandleTypeDef* htim, TIM_HallSensor_InitTypeDef* sConfig); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_DeInit(TIM_HandleTypeDef* htim); - -void HAL_TIMEx_HallSensor_MspInit(TIM_HandleTypeDef* htim); -void HAL_TIMEx_HallSensor_MspDeInit(TIM_HandleTypeDef* htim); - - /* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start(TIM_HandleTypeDef* htim); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop(TIM_HandleTypeDef* htim); -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_IT(TIM_HandleTypeDef* htim); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_IT(TIM_HandleTypeDef* htim); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Start_DMA(TIM_HandleTypeDef* htim, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIMEx_HallSensor_Stop_DMA(TIM_HandleTypeDef* htim); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group2 - * @{ - */ -/* Timer Complementary Output Compare functions *****************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start(TIM_HandleTypeDef* htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel); - -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIMEx_OCN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIMEx_OCN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group3 - * @{ - */ -/* Timer Complementary PWM functions ****************************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start(TIM_HandleTypeDef* htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop(TIM_HandleTypeDef* htim, uint32_t Channel); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_IT(TIM_HandleTypeDef* htim, uint32_t Channel); -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t Channel); -/* Non-Blocking mode: DMA */ -HAL_StatusTypeDef HAL_TIMEx_PWMN_Start_DMA(TIM_HandleTypeDef* htim, uint32_t Channel, uint32_t *pData, uint16_t Length); -HAL_StatusTypeDef HAL_TIMEx_PWMN_Stop_DMA(TIM_HandleTypeDef* htim, uint32_t Channel); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group4 - * @{ - */ -/* Timer Complementary One Pulse functions **********************************/ -/* Blocking mode: Polling */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start(TIM_HandleTypeDef* htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop(TIM_HandleTypeDef* htim, uint32_t OutputChannel); - -/* Non-Blocking mode: Interrupt */ -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Start_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel); -HAL_StatusTypeDef HAL_TIMEx_OnePulseN_Stop_IT(TIM_HandleTypeDef* htim, uint32_t OutputChannel); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group5 - * @{ - */ -/* Extension Control functions ************************************************/ -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource); -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_IT(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource); -HAL_StatusTypeDef HAL_TIMEx_ConfigCommutationEvent_DMA(TIM_HandleTypeDef* htim, uint32_t InputTrigger, uint32_t CommutationSource); -HAL_StatusTypeDef HAL_TIMEx_MasterConfigSynchronization(TIM_HandleTypeDef* htim, TIM_MasterConfigTypeDef * sMasterConfig); -HAL_StatusTypeDef HAL_TIMEx_ConfigBreakDeadTime(TIM_HandleTypeDef* htim, TIM_BreakDeadTimeConfigTypeDef *sBreakDeadTimeConfig); -HAL_StatusTypeDef HAL_TIMEx_RemapConfig(TIM_HandleTypeDef* htim, uint32_t Remap); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group6 - * @{ - */ -/* Extension Callback *********************************************************/ -void HAL_TIMEx_CommutationCallback(TIM_HandleTypeDef* htim); -void HAL_TIMEx_BreakCallback(TIM_HandleTypeDef* htim); -void TIMEx_DMACommutationCplt(DMA_HandleTypeDef *hdma); -/** - * @} - */ - -/** @addtogroup TIMEx_Exported_Functions_Group7 - * @{ - */ -/* Extension Peripheral State functions **************************************/ -HAL_TIM_StateTypeDef HAL_TIMEx_HallSensor_GetState(TIM_HandleTypeDef* htim); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/* Private macros ------------------------------------------------------------*/ -/** @defgroup TIMEx_Private_Macros TIM Private Macros - * @{ - */ -#if defined (STM32F446xx) -#define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\ - ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\ - ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\ - ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\ - ((TIM_REMAP) == TIM_TIM5_GPIO)||\ - ((TIM_REMAP) == TIM_TIM5_LSI)||\ - ((TIM_REMAP) == TIM_TIM5_LSE)||\ - ((TIM_REMAP) == TIM_TIM5_RTC)||\ - ((TIM_REMAP) == TIM_TIM11_GPIO)||\ - ((TIM_REMAP) == TIM_TIM11_SPDIFRX)||\ - ((TIM_REMAP) == TIM_TIM11_HSE)) -#else -#define IS_TIM_REMAP(TIM_REMAP) (((TIM_REMAP) == TIM_TIM2_TIM8_TRGO)||\ - ((TIM_REMAP) == TIM_TIM2_ETH_PTP)||\ - ((TIM_REMAP) == TIM_TIM2_USBFS_SOF)||\ - ((TIM_REMAP) == TIM_TIM2_USBHS_SOF)||\ - ((TIM_REMAP) == TIM_TIM5_GPIO)||\ - ((TIM_REMAP) == TIM_TIM5_LSI)||\ - ((TIM_REMAP) == TIM_TIM5_LSE)||\ - ((TIM_REMAP) == TIM_TIM5_RTC)||\ - ((TIM_REMAP) == TIM_TIM11_GPIO)||\ - ((TIM_REMAP) == TIM_TIM11_HSE)) -#endif /* STM32F446xx */ - - -#define IS_TIM_DEADTIME(DEADTIME) ((DEADTIME) <= 0xFF) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup TIMEx_Private_Functions TIM Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_TIM_EX_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h deleted file mode 100644 index 8e740bc..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_uart.h +++ /dev/null @@ -1,722 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_uart.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of UART HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_UART_H -#define __STM32F4xx_HAL_UART_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup UART - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup UART_Exported_Types UART Exported Types - * @{ - */ - -/** - * @brief UART Init Structure definition - */ -typedef struct -{ - uint32_t BaudRate; /*!< This member configures the UART communication baud rate. - The baud rate is computed using the following formula: - - IntegerDivider = ((PCLKx) / (8 * (OVR8+1) * (huart->Init.BaudRate))) - - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8 * (OVR8+1)) + 0.5 - Where OVR8 is the "oversampling by 8 mode" configuration bit in the CR1 register. */ - - uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. - This parameter can be a value of @ref UART_Word_Length */ - - uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. - This parameter can be a value of @ref UART_Stop_Bits */ - - uint32_t Parity; /*!< Specifies the parity mode. - This parameter can be a value of @ref UART_Parity - @note When parity is enabled, the computed parity is inserted - at the MSB position of the transmitted data (9th bit when - the word length is set to 9 data bits; 8th bit when the - word length is set to 8 data bits). */ - - uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. - This parameter can be a value of @ref UART_Mode */ - - uint32_t HwFlowCtl; /*!< Specifies whether the hardware flow control mode is enabled - or disabled. - This parameter can be a value of @ref UART_Hardware_Flow_Control */ - - uint32_t OverSampling; /*!< Specifies whether the Over sampling 8 is enabled or disabled, to achieve higher speed (up to fPCLK/8). - This parameter can be a value of @ref UART_Over_Sampling */ -}UART_InitTypeDef; - -/** - * @brief HAL UART State structures definition - */ -typedef enum -{ - HAL_UART_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */ - HAL_UART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ - HAL_UART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ - HAL_UART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ - HAL_UART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ - HAL_UART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission and Reception process is ongoing */ - HAL_UART_STATE_TIMEOUT = 0x03, /*!< Timeout state */ - HAL_UART_STATE_ERROR = 0x04 /*!< Error */ -}HAL_UART_StateTypeDef; - -/** - * @brief UART handle Structure definition - */ -typedef struct -{ - USART_TypeDef *Instance; /*!< UART registers base address */ - - UART_InitTypeDef Init; /*!< UART communication parameters */ - - uint8_t *pTxBuffPtr; /*!< Pointer to UART Tx transfer Buffer */ - - uint16_t TxXferSize; /*!< UART Tx Transfer size */ - - uint16_t TxXferCount; /*!< UART Tx Transfer Counter */ - - uint8_t *pRxBuffPtr; /*!< Pointer to UART Rx transfer Buffer */ - - uint16_t RxXferSize; /*!< UART Rx Transfer size */ - - uint16_t RxXferCount; /*!< UART Rx Transfer Counter */ - - DMA_HandleTypeDef *hdmatx; /*!< UART Tx DMA Handle parameters */ - - DMA_HandleTypeDef *hdmarx; /*!< UART Rx DMA Handle parameters */ - - HAL_LockTypeDef Lock; /*!< Locking object */ - - __IO HAL_UART_StateTypeDef State; /*!< UART communication state */ - - __IO uint32_t ErrorCode; /*!< UART Error code */ - -}UART_HandleTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup UART_Exported_Constants UART Exported constants - * @{ - */ - -/** @defgroup UART_Error_Code UART Error Code - * @brief UART Error Code - * @{ - */ -#define HAL_UART_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ -#define HAL_UART_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */ -#define HAL_UART_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */ -#define HAL_UART_ERROR_FE ((uint32_t)0x00000004) /*!< Frame error */ -#define HAL_UART_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */ -#define HAL_UART_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */ -/** - * @} - */ - -/** @defgroup UART_Word_Length UART Word Length - * @{ - */ -#define UART_WORDLENGTH_8B ((uint32_t)0x00000000) -#define UART_WORDLENGTH_9B ((uint32_t)USART_CR1_M) -/** - * @} - */ - -/** @defgroup UART_Stop_Bits UART Number of Stop Bits - * @{ - */ -#define UART_STOPBITS_1 ((uint32_t)0x00000000) -#define UART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1) -/** - * @} - */ - -/** @defgroup UART_Parity UART Parity - * @{ - */ -#define UART_PARITY_NONE ((uint32_t)0x00000000) -#define UART_PARITY_EVEN ((uint32_t)USART_CR1_PCE) -#define UART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) -/** - * @} - */ - -/** @defgroup UART_Hardware_Flow_Control UART Hardware Flow Control - * @{ - */ -#define UART_HWCONTROL_NONE ((uint32_t)0x00000000) -#define UART_HWCONTROL_RTS ((uint32_t)USART_CR3_RTSE) -#define UART_HWCONTROL_CTS ((uint32_t)USART_CR3_CTSE) -#define UART_HWCONTROL_RTS_CTS ((uint32_t)(USART_CR3_RTSE | USART_CR3_CTSE)) -/** - * @} - */ - -/** @defgroup UART_Mode UART Transfer Mode - * @{ - */ -#define UART_MODE_RX ((uint32_t)USART_CR1_RE) -#define UART_MODE_TX ((uint32_t)USART_CR1_TE) -#define UART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) -/** - * @} - */ - - /** @defgroup UART_State UART State - * @{ - */ -#define UART_STATE_DISABLE ((uint32_t)0x00000000) -#define UART_STATE_ENABLE ((uint32_t)USART_CR1_UE) -/** - * @} - */ - -/** @defgroup UART_Over_Sampling UART Over Sampling - * @{ - */ -#define UART_OVERSAMPLING_16 ((uint32_t)0x00000000) -#define UART_OVERSAMPLING_8 ((uint32_t)USART_CR1_OVER8) -/** - * @} - */ - -/** @defgroup UART_LIN_Break_Detection_Length UART LIN Break Detection Length - * @{ - */ -#define UART_LINBREAKDETECTLENGTH_10B ((uint32_t)0x00000000) -#define UART_LINBREAKDETECTLENGTH_11B ((uint32_t)0x00000020) -/** - * @} - */ - -/** @defgroup UART_WakeUp_functions UART Wakeup Functions - * @{ - */ -#define UART_WAKEUPMETHOD_IDLELINE ((uint32_t)0x00000000) -#define UART_WAKEUPMETHOD_ADDRESSMARK ((uint32_t)0x00000800) -/** - * @} - */ - -/** @defgroup UART_Flags UART FLags - * Elements values convention: 0xXXXX - * - 0xXXXX : Flag mask in the SR register - * @{ - */ -#define UART_FLAG_CTS ((uint32_t)USART_SR_CTS) -#define UART_FLAG_LBD ((uint32_t)USART_SR_LBD) -#define UART_FLAG_TXE ((uint32_t)USART_SR_TXE) -#define UART_FLAG_TC ((uint32_t)USART_SR_TC) -#define UART_FLAG_RXNE ((uint32_t)USART_SR_RXNE) -#define UART_FLAG_IDLE ((uint32_t)USART_SR_IDLE) -#define UART_FLAG_ORE ((uint32_t)USART_SR_ORE) -#define UART_FLAG_NE ((uint32_t)USART_SR_NE) -#define UART_FLAG_FE ((uint32_t)USART_SR_FE) -#define UART_FLAG_PE ((uint32_t)USART_SR_PE) -/** - * @} - */ - -/** @defgroup UART_Interrupt_definition UART Interrupt Definitions - * Elements values convention: 0xY000XXXX - * - XXXX : Interrupt mask (16 bits) in the Y register - * - Y : Interrupt source register (2bits) - * - 0001: CR1 register - * - 0010: CR2 register - * - 0011: CR3 register - * - * @{ - */ - -#define UART_IT_PE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_PEIE)) -#define UART_IT_TXE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_TXEIE)) -#define UART_IT_TC ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_TCIE)) -#define UART_IT_RXNE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE)) -#define UART_IT_IDLE ((uint32_t)(UART_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE)) - -#define UART_IT_LBD ((uint32_t)(UART_CR2_REG_INDEX << 28 | USART_CR2_LBDIE)) - -#define UART_IT_CTS ((uint32_t)(UART_CR3_REG_INDEX << 28 | USART_CR3_CTSIE)) -#define UART_IT_ERR ((uint32_t)(UART_CR3_REG_INDEX << 28 | USART_CR3_EIE)) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup UART_Exported_Macros UART Exported Macros - * @{ - */ - -/** @brief Reset UART handle state - * @param __HANDLE__: specifies the UART Handle. - * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @retval None - */ -#define __HAL_UART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_UART_STATE_RESET) - -/** @brief Flushes the UART DR register - * @param __HANDLE__: specifies the UART Handle. - */ -#define __HAL_UART_FLUSH_DRREGISTER(__HANDLE__) ((__HANDLE__)->Instance->DR) - -/** @brief Checks whether the specified UART flag is set or not. - * @param __HANDLE__: specifies the UART Handle. - * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5) - * @arg UART_FLAG_LBD: LIN Break detection flag - * @arg UART_FLAG_TXE: Transmit data register empty flag - * @arg UART_FLAG_TC: Transmission Complete flag - * @arg UART_FLAG_RXNE: Receive data register not empty flag - * @arg UART_FLAG_IDLE: Idle Line detection flag - * @arg UART_FLAG_ORE: Overrun Error flag - * @arg UART_FLAG_NE: Noise Error flag - * @arg UART_FLAG_FE: Framing Error flag - * @arg UART_FLAG_PE: Parity Error flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ - -#define __HAL_UART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) - -/** @brief Clears the specified UART pending flag. - * @param __HANDLE__: specifies the UART Handle. - * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param __FLAG__: specifies the flag to check. - * This parameter can be any combination of the following values: - * @arg UART_FLAG_CTS: CTS Change flag (not available for UART4 and UART5). - * @arg UART_FLAG_LBD: LIN Break detection flag. - * @arg UART_FLAG_TC: Transmission Complete flag. - * @arg UART_FLAG_RXNE: Receive data register not empty flag. - * - * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun - * error) and IDLE (Idle line detected) flags are cleared by software - * sequence: a read operation to USART_SR register followed by a read - * operation to USART_DR register. - * @note RXNE flag can be also cleared by a read to the USART_DR register. - * @note TC flag can be also cleared by software sequence: a read operation to - * USART_SR register followed by a write operation to USART_DR register. - * @note TXE flag is cleared only by a write to the USART_DR register. - * - * @retval None - */ -#define __HAL_UART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) - -/** @brief Clear the UART PE pending flag. - * @param __HANDLE__: specifies the UART Handle. - * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @retval None - */ -#define __HAL_UART_CLEAR_PEFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg; \ - tmpreg = (__HANDLE__)->Instance->SR; \ - tmpreg = (__HANDLE__)->Instance->DR; \ - UNUSED(tmpreg); \ - } while(0) - -/** @brief Clear the UART FE pending flag. - * @param __HANDLE__: specifies the UART Handle. - * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @retval None - */ -#define __HAL_UART_CLEAR_FEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Clear the UART NE pending flag. - * @param __HANDLE__: specifies the UART Handle. - * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @retval None - */ -#define __HAL_UART_CLEAR_NEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Clear the UART ORE pending flag. - * @param __HANDLE__: specifies the UART Handle. - * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @retval None - */ -#define __HAL_UART_CLEAR_OREFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Clear the UART IDLE pending flag. - * @param __HANDLE__: specifies the UART Handle. - * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @retval None - */ -#define __HAL_UART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_UART_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Enable the specified UART interrupt. - * @param __HANDLE__: specifies the UART Handle. - * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param __INTERRUPT__: specifies the UART interrupt source to enable. - * This parameter can be one of the following values: - * @arg UART_IT_CTS: CTS change interrupt - * @arg UART_IT_LBD: LIN Break detection interrupt - * @arg UART_IT_TXE: Transmit Data Register empty interrupt - * @arg UART_IT_TC: Transmission complete interrupt - * @arg UART_IT_RXNE: Receive Data register not empty interrupt - * @arg UART_IT_IDLE: Idle line detection interrupt - * @arg UART_IT_PE: Parity Error interrupt - * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) - * @retval None - */ -#define UART_IT_MASK ((uint32_t)0x0000FFFF) -#define __HAL_UART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & UART_IT_MASK)): \ - (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & UART_IT_MASK)): \ - ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & UART_IT_MASK))) -/** @brief Disable the specified UART interrupt. - * @param __HANDLE__: specifies the UART Handle. - * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param __INTERRUPT__: specifies the UART interrupt source to disable. - * This parameter can be one of the following values: - * @arg UART_IT_CTS: CTS change interrupt - * @arg UART_IT_LBD: LIN Break detection interrupt - * @arg UART_IT_TXE: Transmit Data Register empty interrupt - * @arg UART_IT_TC: Transmission complete interrupt - * @arg UART_IT_RXNE: Receive Data register not empty interrupt - * @arg UART_IT_IDLE: Idle line detection interrupt - * @arg UART_IT_PE: Parity Error interrupt - * @arg UART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) - * @retval None - */ -#define __HAL_UART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & UART_IT_MASK)): \ - (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & UART_IT_MASK)): \ - ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & UART_IT_MASK))) - -/** @brief Checks whether the specified UART interrupt has occurred or not. - * @param __HANDLE__: specifies the UART Handle. - * This parameter can be UARTx where x: 1, 2, 3, 4, 5, 6, 7 or 8 to select the USART or - * UART peripheral. - * @param __IT__: specifies the UART interrupt source to check. - * This parameter can be one of the following values: - * @arg UART_IT_CTS: CTS change interrupt (not available for UART4 and UART5) - * @arg UART_IT_LBD: LIN Break detection interrupt - * @arg UART_IT_TXE: Transmit Data Register empty interrupt - * @arg UART_IT_TC: Transmission complete interrupt - * @arg UART_IT_RXNE: Receive Data register not empty interrupt - * @arg UART_IT_IDLE: Idle line detection interrupt - * @arg USART_IT_ERR: Error interrupt - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_UART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == 2)? \ - (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & UART_IT_MASK)) - -/** @brief Enable CTS flow control - * This macro allows to enable CTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) - * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__: specifies the UART Handle. - * The Handle Instance can be USART1, USART2 or LPUART. - * @retval None - */ -#define __HAL_UART_HWCONTROL_CTS_ENABLE(__HANDLE__) \ - do{ \ - SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ - (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_CTSE; \ - } while(0) - -/** @brief Disable CTS flow control - * This macro allows to disable CTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying CTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) - * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__: specifies the UART Handle. - * The Handle Instance can be USART1, USART2 or LPUART. - * @retval None - */ -#define __HAL_UART_HWCONTROL_CTS_DISABLE(__HANDLE__) \ - do{ \ - CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_CTSE); \ - (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_CTSE); \ - } while(0) - -/** @brief Enable RTS flow control - * This macro allows to enable RTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) - * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__: specifies the UART Handle. - * The Handle Instance can be USART1, USART2 or LPUART. - * @retval None - */ -#define __HAL_UART_HWCONTROL_RTS_ENABLE(__HANDLE__) \ - do{ \ - SET_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE); \ - (__HANDLE__)->Init.HwFlowCtl |= USART_CR3_RTSE; \ - } while(0) - -/** @brief Disable RTS flow control - * This macro allows to disable RTS hardware flow control for a given UART instance, - * without need to call HAL_UART_Init() function. - * As involving direct access to UART registers, usage of this macro should be fully endorsed by user. - * @note As macro is expected to be used for modifying RTS Hw flow control feature activation, without need - * for USART instance Deinit/Init, following conditions for macro call should be fulfilled : - * - UART instance should have already been initialised (through call of HAL_UART_Init() ) - * - macro could only be called when corresponding UART instance is disabled (i.e __HAL_UART_DISABLE(__HANDLE__)) - * and should be followed by an Enable macro (i.e __HAL_UART_ENABLE(__HANDLE__)). - * @param __HANDLE__: specifies the UART Handle. - * The Handle Instance can be USART1, USART2 or LPUART. - * @retval None - */ -#define __HAL_UART_HWCONTROL_RTS_DISABLE(__HANDLE__) \ - do{ \ - CLEAR_BIT((__HANDLE__)->Instance->CR3, USART_CR3_RTSE);\ - (__HANDLE__)->Init.HwFlowCtl &= ~(USART_CR3_RTSE); \ - } while(0) - -/** @brief macros to enables the UART's one bit sample method - * @param __HANDLE__: specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) - -/** @brief macros to disables the UART's one bit sample method - * @param __HANDLE__: specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT)) - -/** @brief Enable UART - * @param __HANDLE__: specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 |= USART_CR1_UE) - -/** @brief Disable UART - * @param __HANDLE__: specifies the UART Handle. - * @retval None - */ -#define __HAL_UART_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup UART_Exported_Functions - * @{ - */ - -/** @addtogroup UART_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions **********************************/ -HAL_StatusTypeDef HAL_UART_Init(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_HalfDuplex_Init(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_LIN_Init(UART_HandleTypeDef *huart, uint32_t BreakDetectLength); -HAL_StatusTypeDef HAL_MultiProcessor_Init(UART_HandleTypeDef *huart, uint8_t Address, uint32_t WakeUpMethod); -HAL_StatusTypeDef HAL_UART_DeInit (UART_HandleTypeDef *huart); -void HAL_UART_MspInit(UART_HandleTypeDef *huart); -void HAL_UART_MspDeInit(UART_HandleTypeDef *huart); -/** - * @} - */ - -/** @addtogroup UART_Exported_Functions_Group2 - * @{ - */ -/* IO operation functions *******************************************************/ -HAL_StatusTypeDef HAL_UART_Transmit(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_UART_Receive(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_UART_Transmit_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_Receive_IT(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_Transmit_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_Receive_DMA(UART_HandleTypeDef *huart, uint8_t *pData, uint16_t Size); -HAL_StatusTypeDef HAL_UART_DMAPause(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_DMAResume(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_UART_DMAStop(UART_HandleTypeDef *huart); -void HAL_UART_IRQHandler(UART_HandleTypeDef *huart); -void HAL_UART_TxCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_TxHalfCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_RxHalfCpltCallback(UART_HandleTypeDef *huart); -void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart); -/** - * @} - */ - -/** @addtogroup UART_Exported_Functions_Group3 - * @{ - */ -/* Peripheral Control functions ************************************************/ -HAL_StatusTypeDef HAL_LIN_SendBreak(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_MultiProcessor_EnterMuteMode(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_MultiProcessor_ExitMuteMode(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_HalfDuplex_EnableTransmitter(UART_HandleTypeDef *huart); -HAL_StatusTypeDef HAL_HalfDuplex_EnableReceiver(UART_HandleTypeDef *huart); -/** - * @} - */ - -/** @addtogroup UART_Exported_Functions_Group4 - * @{ - */ -/* Peripheral State functions **************************************************/ -HAL_UART_StateTypeDef HAL_UART_GetState(UART_HandleTypeDef *huart); -uint32_t HAL_UART_GetError(UART_HandleTypeDef *huart); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup UART_Private_Constants UART Private Constants - * @{ - */ -/** @brief UART interruptions flag mask - * - */ -#define UART_CR1_REG_INDEX 1 -#define UART_CR2_REG_INDEX 2 -#define UART_CR3_REG_INDEX 3 -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup UART_Private_Macros UART Private Macros - * @{ - */ -#define IS_UART_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B) || \ - ((LENGTH) == UART_WORDLENGTH_9B)) -#define IS_UART_LIN_WORD_LENGTH(LENGTH) (((LENGTH) == UART_WORDLENGTH_8B)) -#define IS_UART_STOPBITS(STOPBITS) (((STOPBITS) == UART_STOPBITS_1) || \ - ((STOPBITS) == UART_STOPBITS_2)) -#define IS_UART_PARITY(PARITY) (((PARITY) == UART_PARITY_NONE) || \ - ((PARITY) == UART_PARITY_EVEN) || \ - ((PARITY) == UART_PARITY_ODD)) -#define IS_UART_HARDWARE_FLOW_CONTROL(CONTROL)\ - (((CONTROL) == UART_HWCONTROL_NONE) || \ - ((CONTROL) == UART_HWCONTROL_RTS) || \ - ((CONTROL) == UART_HWCONTROL_CTS) || \ - ((CONTROL) == UART_HWCONTROL_RTS_CTS)) -#define IS_UART_MODE(MODE) ((((MODE) & (uint32_t)0x0000FFF3) == 0x00) && ((MODE) != (uint32_t)0x000000)) -#define IS_UART_STATE(STATE) (((STATE) == UART_STATE_DISABLE) || \ - ((STATE) == UART_STATE_ENABLE)) -#define IS_UART_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16) || \ - ((SAMPLING) == UART_OVERSAMPLING_8)) -#define IS_UART_LIN_OVERSAMPLING(SAMPLING) (((SAMPLING) == UART_OVERSAMPLING_16)) -#define IS_UART_LIN_BREAK_DETECT_LENGTH(LENGTH) (((LENGTH) == UART_LINBREAKDETECTLENGTH_10B) || \ - ((LENGTH) == UART_LINBREAKDETECTLENGTH_11B)) -#define IS_UART_WAKEUPMETHOD(WAKEUP) (((WAKEUP) == UART_WAKEUPMETHOD_IDLELINE) || \ - ((WAKEUP) == UART_WAKEUPMETHOD_ADDRESSMARK)) -#define IS_UART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001) -#define IS_UART_ADDRESS(ADDRESS) ((ADDRESS) <= 0xF) - -#define UART_DIV_SAMPLING16(_PCLK_, _BAUD_) (((_PCLK_)*25)/(4*(_BAUD_))) -#define UART_DIVMANT_SAMPLING16(_PCLK_, _BAUD_) (UART_DIV_SAMPLING16((_PCLK_), (_BAUD_))/100) -#define UART_DIVFRAQ_SAMPLING16(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING16((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100) -#define UART_BRR_SAMPLING16(_PCLK_, _BAUD_) ((UART_DIVMANT_SAMPLING16((_PCLK_), (_BAUD_)) << 4)|(UART_DIVFRAQ_SAMPLING16((_PCLK_), (_BAUD_)) & 0x0F)) - -#define UART_DIV_SAMPLING8(_PCLK_, _BAUD_) (((_PCLK_)*25)/(2*(_BAUD_))) -#define UART_DIVMANT_SAMPLING8(_PCLK_, _BAUD_) (UART_DIV_SAMPLING8((_PCLK_), (_BAUD_))/100) -#define UART_DIVFRAQ_SAMPLING8(_PCLK_, _BAUD_) (((UART_DIV_SAMPLING8((_PCLK_), (_BAUD_)) - (UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100) -#define UART_BRR_SAMPLING8(_PCLK_, _BAUD_) ((UART_DIVMANT_SAMPLING8((_PCLK_), (_BAUD_)) << 4)|(UART_DIVFRAQ_SAMPLING8((_PCLK_), (_BAUD_)) & 0x0F)) - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup UART_Private_Functions UART Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_UART_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_usart.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_usart.h deleted file mode 100644 index 2333f67..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_usart.h +++ /dev/null @@ -1,588 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_usart.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of USART HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_USART_H -#define __STM32F4xx_HAL_USART_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup USART - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup USART_Exported_Types USART Exported Types - * @{ - */ - -/** - * @brief USART Init Structure definition - */ -typedef struct -{ - uint32_t BaudRate; /*!< This member configures the Usart communication baud rate. - The baud rate is computed using the following formula: - - IntegerDivider = ((PCLKx) / (8 * (husart->Init.BaudRate))) - - FractionalDivider = ((IntegerDivider - ((uint32_t) IntegerDivider)) * 8) + 0.5 */ - - uint32_t WordLength; /*!< Specifies the number of data bits transmitted or received in a frame. - This parameter can be a value of @ref USART_Word_Length */ - - uint32_t StopBits; /*!< Specifies the number of stop bits transmitted. - This parameter can be a value of @ref USART_Stop_Bits */ - - uint32_t Parity; /*!< Specifies the parity mode. - This parameter can be a value of @ref USART_Parity - @note When parity is enabled, the computed parity is inserted - at the MSB position of the transmitted data (9th bit when - the word length is set to 9 data bits; 8th bit when the - word length is set to 8 data bits). */ - - uint32_t Mode; /*!< Specifies whether the Receive or Transmit mode is enabled or disabled. - This parameter can be a value of @ref USART_Mode */ - - uint32_t CLKPolarity; /*!< Specifies the steady state of the serial clock. - This parameter can be a value of @ref USART_Clock_Polarity */ - - uint32_t CLKPhase; /*!< Specifies the clock transition on which the bit capture is made. - This parameter can be a value of @ref USART_Clock_Phase */ - - uint32_t CLKLastBit; /*!< Specifies whether the clock pulse corresponding to the last transmitted - data bit (MSB) has to be output on the SCLK pin in synchronous mode. - This parameter can be a value of @ref USART_Last_Bit */ -}USART_InitTypeDef; - -/** - * @brief HAL State structures definition - */ -typedef enum -{ - HAL_USART_STATE_RESET = 0x00, /*!< Peripheral is not yet Initialized */ - HAL_USART_STATE_READY = 0x01, /*!< Peripheral Initialized and ready for use */ - HAL_USART_STATE_BUSY = 0x02, /*!< an internal process is ongoing */ - HAL_USART_STATE_BUSY_TX = 0x12, /*!< Data Transmission process is ongoing */ - HAL_USART_STATE_BUSY_RX = 0x22, /*!< Data Reception process is ongoing */ - HAL_USART_STATE_BUSY_TX_RX = 0x32, /*!< Data Transmission Reception process is ongoing */ - HAL_USART_STATE_TIMEOUT = 0x03, /*!< Timeout state */ - HAL_USART_STATE_ERROR = 0x04 /*!< Error */ -}HAL_USART_StateTypeDef; - -/** - * @brief USART handle Structure definition - */ -typedef struct -{ - USART_TypeDef *Instance; /* USART registers base address */ - - USART_InitTypeDef Init; /* Usart communication parameters */ - - uint8_t *pTxBuffPtr; /* Pointer to Usart Tx transfer Buffer */ - - uint16_t TxXferSize; /* Usart Tx Transfer size */ - - __IO uint16_t TxXferCount; /* Usart Tx Transfer Counter */ - - uint8_t *pRxBuffPtr; /* Pointer to Usart Rx transfer Buffer */ - - uint16_t RxXferSize; /* Usart Rx Transfer size */ - - __IO uint16_t RxXferCount; /* Usart Rx Transfer Counter */ - - DMA_HandleTypeDef *hdmatx; /* Usart Tx DMA Handle parameters */ - - DMA_HandleTypeDef *hdmarx; /* Usart Rx DMA Handle parameters */ - - HAL_LockTypeDef Lock; /* Locking object */ - - __IO HAL_USART_StateTypeDef State; /* Usart communication state */ - - __IO uint32_t ErrorCode; /* USART Error code */ - -}USART_HandleTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup USART_Exported_Constants USART Exported Constants - * @{ - */ - -/** @defgroup USART_Error_Code USART Error Code - * @brief USART Error Code - * @{ - */ -#define HAL_USART_ERROR_NONE ((uint32_t)0x00000000) /*!< No error */ -#define HAL_USART_ERROR_PE ((uint32_t)0x00000001) /*!< Parity error */ -#define HAL_USART_ERROR_NE ((uint32_t)0x00000002) /*!< Noise error */ -#define HAL_USART_ERROR_FE ((uint32_t)0x00000004) /*!< Frame error */ -#define HAL_USART_ERROR_ORE ((uint32_t)0x00000008) /*!< Overrun error */ -#define HAL_USART_ERROR_DMA ((uint32_t)0x00000010) /*!< DMA transfer error */ -/** - * @} - */ - -/** @defgroup USART_Word_Length USART Word Length - * @{ - */ -#define USART_WORDLENGTH_8B ((uint32_t)0x00000000) -#define USART_WORDLENGTH_9B ((uint32_t)USART_CR1_M) -/** - * @} - */ - -/** @defgroup USART_Stop_Bits USART Number of Stop Bits - * @{ - */ -#define USART_STOPBITS_1 ((uint32_t)0x00000000) -#define USART_STOPBITS_0_5 ((uint32_t)USART_CR2_STOP_0) -#define USART_STOPBITS_2 ((uint32_t)USART_CR2_STOP_1) -#define USART_STOPBITS_1_5 ((uint32_t)(USART_CR2_STOP_0 | USART_CR2_STOP_1)) -/** - * @} - */ - -/** @defgroup USART_Parity USART Parity - * @{ - */ -#define USART_PARITY_NONE ((uint32_t)0x00000000) -#define USART_PARITY_EVEN ((uint32_t)USART_CR1_PCE) -#define USART_PARITY_ODD ((uint32_t)(USART_CR1_PCE | USART_CR1_PS)) -/** - * @} - */ - -/** @defgroup USART_Mode USART Mode - * @{ - */ -#define USART_MODE_RX ((uint32_t)USART_CR1_RE) -#define USART_MODE_TX ((uint32_t)USART_CR1_TE) -#define USART_MODE_TX_RX ((uint32_t)(USART_CR1_TE |USART_CR1_RE)) -/** - * @} - */ - -/** @defgroup USART_Clock USART Clock - * @{ - */ -#define USART_CLOCK_DISABLE ((uint32_t)0x00000000) -#define USART_CLOCK_ENABLE ((uint32_t)USART_CR2_CLKEN) -/** - * @} - */ - -/** @defgroup USART_Clock_Polarity USART Clock Polarity - * @{ - */ -#define USART_POLARITY_LOW ((uint32_t)0x00000000) -#define USART_POLARITY_HIGH ((uint32_t)USART_CR2_CPOL) -/** - * @} - */ - -/** @defgroup USART_Clock_Phase USART Clock Phase - * @{ - */ -#define USART_PHASE_1EDGE ((uint32_t)0x00000000) -#define USART_PHASE_2EDGE ((uint32_t)USART_CR2_CPHA) -/** - * @} - */ - -/** @defgroup USART_Last_Bit USART Last Bit - * @{ - */ -#define USART_LASTBIT_DISABLE ((uint32_t)0x00000000) -#define USART_LASTBIT_ENABLE ((uint32_t)USART_CR2_LBCL) -/** - * @} - */ - -/** @defgroup USART_NACK_State USART NACK State - * @{ - */ -#define USART_NACK_ENABLE ((uint32_t)USART_CR3_NACK) -#define USART_NACK_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup USART_Flags USART Flags - * Elements values convention: 0xXXXX - * - 0xXXXX : Flag mask in the SR register - * @{ - */ -#define USART_FLAG_TXE ((uint32_t)0x00000080) -#define USART_FLAG_TC ((uint32_t)0x00000040) -#define USART_FLAG_RXNE ((uint32_t)0x00000020) -#define USART_FLAG_IDLE ((uint32_t)0x00000010) -#define USART_FLAG_ORE ((uint32_t)0x00000008) -#define USART_FLAG_NE ((uint32_t)0x00000004) -#define USART_FLAG_FE ((uint32_t)0x00000002) -#define USART_FLAG_PE ((uint32_t)0x00000001) -/** - * @} - */ - -/** @defgroup USART_Interrupt_definition USART Interrupts Definition - * Elements values convention: 0xY000XXXX - * - XXXX : Interrupt mask in the XX register - * - Y : Interrupt source register (2bits) - * - 01: CR1 register - * - 10: CR2 register - * - 11: CR3 register - * - * @{ - */ -#define USART_IT_PE ((uint32_t)(USART_CR1_REG_INDEX << 28 | USART_CR1_PEIE)) -#define USART_IT_TXE ((uint32_t)(USART_CR1_REG_INDEX << 28 | USART_CR1_TXEIE)) -#define USART_IT_TC ((uint32_t)(USART_CR1_REG_INDEX << 28 | USART_CR1_TCIE)) -#define USART_IT_RXNE ((uint32_t)(USART_CR1_REG_INDEX << 28 | USART_CR1_RXNEIE)) -#define USART_IT_IDLE ((uint32_t)(USART_CR1_REG_INDEX << 28 | USART_CR1_IDLEIE)) - -#define USART_IT_LBD ((uint32_t)(USART_CR2_REG_INDEX << 28 | USART_CR2_LBDIE)) - -#define USART_IT_CTS ((uint32_t)(USART_CR3_REG_INDEX << 28 | USART_CR3_CTSIE)) -#define USART_IT_ERR ((uint32_t)(USART_CR3_REG_INDEX << 28 | USART_CR3_EIE)) -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup USART_Exported_Macros USART Exported Macros - * @{ - */ - -/** @brief Reset USART handle state - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral. - * @retval None - */ -#define __HAL_USART_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_USART_STATE_RESET) - -/** @brief Checks whether the specified Smartcard flag is set or not. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral. - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg USART_FLAG_TXE: Transmit data register empty flag - * @arg USART_FLAG_TC: Transmission Complete flag - * @arg USART_FLAG_RXNE: Receive data register not empty flag - * @arg USART_FLAG_IDLE: Idle Line detection flag - * @arg USART_FLAG_ORE: Overrun Error flag - * @arg USART_FLAG_NE: Noise Error flag - * @arg USART_FLAG_FE: Framing Error flag - * @arg USART_FLAG_PE: Parity Error flag - * @retval The new state of __FLAG__ (TRUE or FALSE). - */ -#define __HAL_USART_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) - -/** @brief Clears the specified Smartcard pending flags. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral. - * @param __FLAG__: specifies the flag to check. - * This parameter can be any combination of the following values: - * @arg USART_FLAG_TC: Transmission Complete flag. - * @arg USART_FLAG_RXNE: Receive data register not empty flag. - * - * @note PE (Parity error), FE (Framing error), NE (Noise error), ORE (Overrun - * error) and IDLE (Idle line detected) flags are cleared by software - * sequence: a read operation to USART_SR register followed by a read - * operation to USART_DR register. - * @note RXNE flag can be also cleared by a read to the USART_DR register. - * @note TC flag can be also cleared by software sequence: a read operation to - * USART_SR register followed by a write operation to USART_DR register. - * @note TXE flag is cleared only by a write to the USART_DR register. - * - * @retval None - */ -#define __HAL_USART_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->SR = ~(__FLAG__)) - -/** @brief Clear the USART PE pending flag. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral. - * @retval None - */ -#define __HAL_USART_CLEAR_PEFLAG(__HANDLE__) \ - do{ \ - __IO uint32_t tmpreg; \ - tmpreg = (__HANDLE__)->Instance->SR; \ - tmpreg = (__HANDLE__)->Instance->DR; \ - UNUSED(tmpreg); \ - } while(0) - -/** @brief Clear the USART FE pending flag. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral. - * @retval None - */ -#define __HAL_USART_CLEAR_FEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Clear the USART NE pending flag. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral. - * @retval None - */ -#define __HAL_USART_CLEAR_NEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Clear the UART ORE pending flag. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral. - * @retval None - */ -#define __HAL_USART_CLEAR_OREFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Clear the USART IDLE pending flag. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral. - * @retval None - */ -#define __HAL_USART_CLEAR_IDLEFLAG(__HANDLE__) __HAL_USART_CLEAR_PEFLAG(__HANDLE__) - -/** @brief Enables or disables the specified USART interrupts. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral. - * @param __INTERRUPT__: specifies the USART interrupt source to check. - * This parameter can be one of the following values: - * @arg USART_IT_TXE: Transmit Data Register empty interrupt - * @arg USART_IT_TC: Transmission complete interrupt - * @arg USART_IT_RXNE: Receive Data register not empty interrupt - * @arg USART_IT_IDLE: Idle line detection interrupt - * @arg USART_IT_PE: Parity Error interrupt - * @arg USART_IT_ERR: Error interrupt(Frame error, noise error, overrun error) - * This parameter can be: ENABLE or DISABLE. - * @retval None - */ -#define __HAL_USART_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 |= ((__INTERRUPT__) & USART_IT_MASK)): \ - (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 |= ((__INTERRUPT__) & USART_IT_MASK)): \ - ((__HANDLE__)->Instance->CR3 |= ((__INTERRUPT__) & USART_IT_MASK))) -#define __HAL_USART_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((((__INTERRUPT__) >> 28) == 1)? ((__HANDLE__)->Instance->CR1 &= ~((__INTERRUPT__) & USART_IT_MASK)): \ - (((__INTERRUPT__) >> 28) == 2)? ((__HANDLE__)->Instance->CR2 &= ~((__INTERRUPT__) & USART_IT_MASK)): \ - ((__HANDLE__)->Instance->CR3 &= ~ ((__INTERRUPT__) & USART_IT_MASK))) - -/** @brief Checks whether the specified USART interrupt has occurred or not. - * @param __HANDLE__: specifies the USART Handle. - * This parameter can be USARTx where x: 1, 2, 3 or 6 to select the USART peripheral. - * @param __IT__: specifies the USART interrupt source to check. - * This parameter can be one of the following values: - * @arg USART_IT_TXE: Transmit Data Register empty interrupt - * @arg USART_IT_TC: Transmission complete interrupt - * @arg USART_IT_RXNE: Receive Data register not empty interrupt - * @arg USART_IT_IDLE: Idle line detection interrupt - * @arg USART_IT_ERR: Error interrupt - * @arg USART_IT_PE: Parity Error interrupt - * @retval The new state of __IT__ (TRUE or FALSE). - */ -#define __HAL_USART_GET_IT_SOURCE(__HANDLE__, __IT__) (((((__IT__) >> 28) == 1)? (__HANDLE__)->Instance->CR1:(((((uint32_t)(__IT__)) >> 28) == 2)? \ - (__HANDLE__)->Instance->CR2 : (__HANDLE__)->Instance->CR3)) & (((uint32_t)(__IT__)) & USART_IT_MASK)) - -/** @brief Macro to enable the USART's one bit sample method - * @param __HANDLE__: specifies the USART Handle. - * @retval None - */ -#define __HAL_USART_ONE_BIT_SAMPLE_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3|= USART_CR3_ONEBIT) - -/** @brief Macro to disable the USART's one bit sample method - * @param __HANDLE__: specifies the USART Handle. - * @retval None - */ -#define __HAL_USART_ONE_BIT_SAMPLE_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR3 &= (uint16_t)~((uint16_t)USART_CR3_ONEBIT)) - -/** @brief Enable USART - * @param __HANDLE__: specifies the USART Handle. - * USART Handle selects the USARTx peripheral (USART availability and x value depending on device). - * @retval None - */ -#define __HAL_USART_ENABLE(__HANDLE__) ( (__HANDLE__)->Instance->CR1 |= USART_CR1_UE) - -/** @brief Disable USART - * @param __HANDLE__: specifies the USART Handle. - * USART Handle selects the USARTx peripheral (USART availability and x value depending on device). - * @retval None - */ -#define __HAL_USART_DISABLE(__HANDLE__) ( (__HANDLE__)->Instance->CR1 &= ~USART_CR1_UE) - -/** - * @} - */ -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup USART_Exported_Functions - * @{ - */ - -/** @addtogroup USART_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions **********************************/ -HAL_StatusTypeDef HAL_USART_Init(USART_HandleTypeDef *husart); -HAL_StatusTypeDef HAL_USART_DeInit(USART_HandleTypeDef *husart); -void HAL_USART_MspInit(USART_HandleTypeDef *husart); -void HAL_USART_MspDeInit(USART_HandleTypeDef *husart); -/** - * @} - */ - -/** @addtogroup USART_Exported_Functions_Group2 - * @{ - */ -/* IO operation functions *******************************************************/ -HAL_StatusTypeDef HAL_USART_Transmit(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_USART_Receive(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_USART_TransmitReceive(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size, uint32_t Timeout); -HAL_StatusTypeDef HAL_USART_Transmit_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size); -HAL_StatusTypeDef HAL_USART_Receive_IT(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size); -HAL_StatusTypeDef HAL_USART_TransmitReceive_IT(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size); -HAL_StatusTypeDef HAL_USART_Transmit_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint16_t Size); -HAL_StatusTypeDef HAL_USART_Receive_DMA(USART_HandleTypeDef *husart, uint8_t *pRxData, uint16_t Size); -HAL_StatusTypeDef HAL_USART_TransmitReceive_DMA(USART_HandleTypeDef *husart, uint8_t *pTxData, uint8_t *pRxData, uint16_t Size); -HAL_StatusTypeDef HAL_USART_DMAPause(USART_HandleTypeDef *husart); -HAL_StatusTypeDef HAL_USART_DMAResume(USART_HandleTypeDef *husart); -HAL_StatusTypeDef HAL_USART_DMAStop(USART_HandleTypeDef *husart); -void HAL_USART_IRQHandler(USART_HandleTypeDef *husart); -void HAL_USART_TxCpltCallback(USART_HandleTypeDef *husart); -void HAL_USART_TxHalfCpltCallback(USART_HandleTypeDef *husart); -void HAL_USART_RxCpltCallback(USART_HandleTypeDef *husart); -void HAL_USART_RxHalfCpltCallback(USART_HandleTypeDef *husart); -void HAL_USART_TxRxCpltCallback(USART_HandleTypeDef *husart); -void HAL_USART_ErrorCallback(USART_HandleTypeDef *husart); -/** - * @} - */ - -/** @addtogroup USART_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State functions ************************************************/ -HAL_USART_StateTypeDef HAL_USART_GetState(USART_HandleTypeDef *husart); -uint32_t HAL_USART_GetError(USART_HandleTypeDef *husart); -/** - * @} - */ - -/** - * @} - */ -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup USART_Private_Constants USART Private Constants - * @{ - */ -/** @brief USART interruptions flag mask - * - */ -#define USART_IT_MASK ((uint32_t) USART_CR1_PEIE | USART_CR1_TXEIE | USART_CR1_TCIE | USART_CR1_RXNEIE | \ - USART_CR1_IDLEIE | USART_CR2_LBDIE | USART_CR3_CTSIE | USART_CR3_EIE ) - - -#define USART_CR1_REG_INDEX 1 -#define USART_CR2_REG_INDEX 2 -#define USART_CR3_REG_INDEX 3 -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup USART_Private_Macros USART Private Macros - * @{ - */ -#define IS_USART_NACK_STATE(NACK) (((NACK) == USART_NACK_ENABLE) || \ - ((NACK) == USART_NACK_DISABLE)) -#define IS_USART_LASTBIT(LASTBIT) (((LASTBIT) == USART_LASTBIT_DISABLE) || \ - ((LASTBIT) == USART_LASTBIT_ENABLE)) -#define IS_USART_PHASE(CPHA) (((CPHA) == USART_PHASE_1EDGE) || ((CPHA) == USART_PHASE_2EDGE)) -#define IS_USART_POLARITY(CPOL) (((CPOL) == USART_POLARITY_LOW) || ((CPOL) == USART_POLARITY_HIGH)) -#define IS_USART_CLOCK(CLOCK) (((CLOCK) == USART_CLOCK_DISABLE) || \ - ((CLOCK) == USART_CLOCK_ENABLE)) -#define IS_USART_WORD_LENGTH(LENGTH) (((LENGTH) == USART_WORDLENGTH_8B) || \ - ((LENGTH) == USART_WORDLENGTH_9B)) -#define IS_USART_STOPBITS(STOPBITS) (((STOPBITS) == USART_STOPBITS_1) || \ - ((STOPBITS) == USART_STOPBITS_0_5) || \ - ((STOPBITS) == USART_STOPBITS_1_5) || \ - ((STOPBITS) == USART_STOPBITS_2)) -#define IS_USART_PARITY(PARITY) (((PARITY) == USART_PARITY_NONE) || \ - ((PARITY) == USART_PARITY_EVEN) || \ - ((PARITY) == USART_PARITY_ODD)) -#define IS_USART_MODE(MODE) ((((MODE) & (uint32_t)0xFFF3) == 0x00) && ((MODE) != (uint32_t)0x00)) -#define IS_USART_BAUDRATE(BAUDRATE) ((BAUDRATE) < 10500001) - -#define USART_DIV(_PCLK_, _BAUD_) (((_PCLK_)*25)/(2*(_BAUD_))) -#define USART_DIVMANT(_PCLK_, _BAUD_) (USART_DIV((_PCLK_), (_BAUD_))/100) -#define USART_DIVFRAQ(_PCLK_, _BAUD_) (((USART_DIV((_PCLK_), (_BAUD_)) - (USART_DIVMANT((_PCLK_), (_BAUD_)) * 100)) * 16 + 50) / 100) -#define USART_BRR(_PCLK_, _BAUD_) ((USART_DIVMANT((_PCLK_), (_BAUD_)) << 4)|(USART_DIVFRAQ((_PCLK_), (_BAUD_)) & 0x0F)) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup USART_Private_Functions USART Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_USART_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_wwdg.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_wwdg.h deleted file mode 100644 index 03f6c39..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_hal_wwdg.h +++ /dev/null @@ -1,349 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_hal_wwdg.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of WWDG HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_HAL_WWDG_H -#define __STM32F4xx_HAL_WWDG_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup WWDG - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup WWDG_Exported_Types WWDG Exported Types - * @{ - */ - -/** - * @brief WWDG HAL State Structure definition - */ -typedef enum -{ - HAL_WWDG_STATE_RESET = 0x00, /*!< WWDG not yet initialized or disabled */ - HAL_WWDG_STATE_READY = 0x01, /*!< WWDG initialized and ready for use */ - HAL_WWDG_STATE_BUSY = 0x02, /*!< WWDG internal process is ongoing */ - HAL_WWDG_STATE_TIMEOUT = 0x03, /*!< WWDG timeout state */ - HAL_WWDG_STATE_ERROR = 0x04 /*!< WWDG error state */ -}HAL_WWDG_StateTypeDef; - -/** - * @brief WWDG Init structure definition - */ -typedef struct -{ - uint32_t Prescaler; /*!< Specifies the prescaler value of the WWDG. - This parameter can be a value of @ref WWDG_Prescaler */ - - uint32_t Window; /*!< Specifies the WWDG window value to be compared to the downcounter. - This parameter must be a number lower than Max_Data = 0x80 */ - - uint32_t Counter; /*!< Specifies the WWDG free-running downcounter value. - This parameter must be a number between Min_Data = 0x40 and Max_Data = 0x7F */ - -}WWDG_InitTypeDef; - -/** - * @brief WWDG handle Structure definition - */ -typedef struct -{ - WWDG_TypeDef *Instance; /*!< Register base address */ - - WWDG_InitTypeDef Init; /*!< WWDG required parameters */ - - HAL_LockTypeDef Lock; /*!< WWDG locking object */ - - __IO HAL_WWDG_StateTypeDef State; /*!< WWDG communication state */ - -}WWDG_HandleTypeDef; -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup WWDG_Exported_Constants WWDG Exported Constants - * @{ - */ - -/** @defgroup WWDG_Interrupt_definition WWDG Interrupt definition - * @{ - */ -#define WWDG_IT_EWI WWDG_CFR_EWI /*!< Early wakeup interrupt */ -/** - * @} - */ - -/** @defgroup WWDG_Flag_definition WWDG Flag definition - * @brief WWDG Flag definition - * @{ - */ -#define WWDG_FLAG_EWIF WWDG_SR_EWIF /*!< Early wakeup interrupt flag */ -/** - * @} - */ - -/** @defgroup WWDG_Prescaler WWDG Prescaler - * @{ - */ -#define WWDG_PRESCALER_1 ((uint32_t)0x00000000) /*!< WWDG counter clock = (PCLK1/4096)/1 */ -#define WWDG_PRESCALER_2 WWDG_CFR_WDGTB0 /*!< WWDG counter clock = (PCLK1/4096)/2 */ -#define WWDG_PRESCALER_4 WWDG_CFR_WDGTB1 /*!< WWDG counter clock = (PCLK1/4096)/4 */ -#define WWDG_PRESCALER_8 WWDG_CFR_WDGTB /*!< WWDG counter clock = (PCLK1/4096)/8 */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup WWDG_Exported_Macros WWDG Exported Macros - * @{ - */ - -/** @brief Reset WWDG handle state - * @param __HANDLE__: WWDG handle - * @retval None - */ -#define __HAL_WWDG_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_WWDG_STATE_RESET) - -/** - * @brief Enables the WWDG peripheral. - * @param __HANDLE__: WWDG handle - * @retval None - */ -#define __HAL_WWDG_ENABLE(__HANDLE__) SET_BIT((__HANDLE__)->Instance->CR, WWDG_CR_WDGA) - -/** - * @brief Disables the WWDG peripheral. - * @param __HANDLE__: WWDG handle - * @note WARNING: This is a dummy macro for HAL code alignment. - * Once enable, WWDG Peripheral cannot be disabled except by a system reset. - * @retval None - */ -#define __HAL_WWDG_DISABLE(__HANDLE__) /* dummy macro */ - -/** - * @brief Gets the selected WWDG's it status. - * @param __HANDLE__: WWDG handle - * @param __INTERRUPT__: specifies the it to check. - * This parameter can be one of the following values: - * @arg WWDG_FLAG_EWIF: Early wakeup interrupt IT - * @retval The new state of WWDG_FLAG (SET or RESET). - */ -#define __HAL_WWDG_GET_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_GET_FLAG((__HANDLE__),(__INTERRUPT__)) - -/** @brief Clear the WWDG's interrupt pending bits - * bits to clear the selected interrupt pending bits. - * @param __HANDLE__: WWDG handle - * @param __INTERRUPT__: specifies the interrupt pending bit to clear. - * This parameter can be one of the following values: - * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag - */ -#define __HAL_WWDG_CLEAR_IT(__HANDLE__, __INTERRUPT__) __HAL_WWDG_CLEAR_FLAG((__HANDLE__), (__INTERRUPT__)) - -/** - * @brief Enables the WWDG early wakeup interrupt. - * @param __HANDLE__: WWDG handle - * @param __INTERRUPT__: specifies the interrupt to enable. - * This parameter can be one of the following values: - * @arg WWDG_IT_EWI: Early wakeup interrupt - * @note Once enabled this interrupt cannot be disabled except by a system reset. - * @retval None - */ -#define __HAL_WWDG_ENABLE_IT(__HANDLE__, __INTERRUPT__) SET_BIT((__HANDLE__)->Instance->CFR, (__INTERRUPT__)) - -/** - * @brief Disables the WWDG early wakeup interrupt. - * @param __HANDLE__: WWDG handle - * @param __INTERRUPT__: specifies the interrupt to disable. - * This parameter can be one of the following values: - * @arg WWDG_IT_EWI: Early wakeup interrupt - * @note WARNING: This is a dummy macro for HAL code alignment. - * Once enabled this interrupt cannot be disabled except by a system reset. - * @retval None - */ -#define __HAL_WWDG_DISABLE_IT(__HANDLE__, __INTERRUPT__) /* dummy macro */ - -/** - * @brief Gets the selected WWDG's flag status. - * @param __HANDLE__: WWDG handle - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag - * @retval The new state of WWDG_FLAG (SET or RESET). - */ -#define __HAL_WWDG_GET_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR & (__FLAG__)) == (__FLAG__)) - -/** - * @brief Clears the WWDG's pending flags. - * @param __HANDLE__: WWDG handle - * @param __FLAG__: specifies the flag to clear. - * This parameter can be one of the following values: - * @arg WWDG_FLAG_EWIF: Early wakeup interrupt flag - * @retval None - */ -#define __HAL_WWDG_CLEAR_FLAG(__HANDLE__, __FLAG__) (((__HANDLE__)->Instance->SR) = ~(__FLAG__)) - -/** @brief Checks if the specified WWDG interrupt source is enabled or disabled. - * @param __HANDLE__: WWDG Handle. - * @param __INTERRUPT__: specifies the WWDG interrupt source to check. - * This parameter can be one of the following values: - * @arg WWDG_IT_EWI: Early Wakeup Interrupt - * @retval state of __INTERRUPT__ (TRUE or FALSE). - */ -#define __HAL_WWDG_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((__HANDLE__)->Instance->CFR & (__INTERRUPT__)) == (__INTERRUPT__)) - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup WWDG_Exported_Functions - * @{ - */ - -/** @addtogroup WWDG_Exported_Functions_Group1 - * @{ - */ -/* Initialization/de-initialization functions **********************************/ -HAL_StatusTypeDef HAL_WWDG_Init(WWDG_HandleTypeDef *hwwdg); -HAL_StatusTypeDef HAL_WWDG_DeInit(WWDG_HandleTypeDef *hwwdg); -void HAL_WWDG_MspInit(WWDG_HandleTypeDef *hwwdg); -void HAL_WWDG_MspDeInit(WWDG_HandleTypeDef *hwwdg); -void HAL_WWDG_WakeupCallback(WWDG_HandleTypeDef* hwwdg); -/** - * @} - */ - -/** @addtogroup WWDG_Exported_Functions_Group2 - * @{ - */ -/* I/O operation functions ******************************************************/ -HAL_StatusTypeDef HAL_WWDG_Start(WWDG_HandleTypeDef *hwwdg); -HAL_StatusTypeDef HAL_WWDG_Start_IT(WWDG_HandleTypeDef *hwwdg); -HAL_StatusTypeDef HAL_WWDG_Refresh(WWDG_HandleTypeDef *hwwdg, uint32_t Counter); -void HAL_WWDG_IRQHandler(WWDG_HandleTypeDef *hwwdg); -/** - * @} - */ - -/** @addtogroup WWDG_Exported_Functions_Group3 - * @{ - */ -/* Peripheral State functions **************************************************/ -HAL_WWDG_StateTypeDef HAL_WWDG_GetState(WWDG_HandleTypeDef *hwwdg); -/** - * @} - */ - -/** - * @} - */ - -/* Private types -------------------------------------------------------------*/ -/* Private variables ---------------------------------------------------------*/ -/* Private constants ---------------------------------------------------------*/ -/** @defgroup WWDG_Private_Constants WWDG Private Constants - * @{ - */ -/** @defgroup WWDG_BitAddress_AliasRegion WWDG BitAddress - * @brief WWDG registers bit address in the alias region - * @{ - */ - -/* --- CFR Register ---*/ -/* Alias word address of EWI bit */ -#define WWDG_CFR_BASE (uint32_t)(WWDG_BASE + 0x04) - -/** - * @} - */ - -/** - * @} - */ - -/* Private macros ------------------------------------------------------------*/ -/** @defgroup WWDG_Private_Macros WWDG Private Macros - * @{ - */ -#define IS_WWDG_PRESCALER(__PRESCALER__) (((__PRESCALER__) == WWDG_PRESCALER_1) || \ - ((__PRESCALER__) == WWDG_PRESCALER_2) || \ - ((__PRESCALER__) == WWDG_PRESCALER_4) || \ - ((__PRESCALER__) == WWDG_PRESCALER_8)) -#define IS_WWDG_WINDOW(__WINDOW__) ((__WINDOW__) <= 0x7F) -#define IS_WWDG_COUNTER(__COUNTER__) (((__COUNTER__) >= 0x40) && ((__COUNTER__) <= 0x7F)) -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup WWDG_Private_Functions WWDG Private Functions - * @{ - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_HAL_WWDG_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fmc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fmc.h deleted file mode 100644 index 385af87..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fmc.h +++ /dev/null @@ -1,1421 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_fmc.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of FMC HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_FMC_H -#define __STM32F4xx_LL_FMC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FMC_LL - * @{ - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx) -/* Private types -------------------------------------------------------------*/ -/** @defgroup FMC_LL_Private_Types FMC Private Types - * @{ - */ - -/** - * @brief FMC NORSRAM Configuration Structure definition - */ -typedef struct -{ - uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used. - This parameter can be a value of @ref FMC_NORSRAM_Bank */ - - uint32_t DataAddressMux; /*!< Specifies whether the address and data values are - multiplexed on the data bus or not. - This parameter can be a value of @ref FMC_Data_Address_Bus_Multiplexing */ - - uint32_t MemoryType; /*!< Specifies the type of external memory attached to - the corresponding memory device. - This parameter can be a value of @ref FMC_Memory_Type */ - - uint32_t MemoryDataWidth; /*!< Specifies the external memory device width. - This parameter can be a value of @ref FMC_NORSRAM_Data_Width */ - - uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory, - valid only with synchronous burst Flash memories. - This parameter can be a value of @ref FMC_Burst_Access_Mode */ - - uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing - the Flash memory in burst mode. - This parameter can be a value of @ref FMC_Wait_Signal_Polarity */ - - uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash - memory, valid only when accessing Flash memories in burst mode. - This parameter can be a value of @ref FMC_Wrap_Mode - This mode is not available for the STM32F446xx devices */ - - uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one - clock cycle before the wait state or during the wait state, - valid only when accessing memories in burst mode. - This parameter can be a value of @ref FMC_Wait_Timing */ - - uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FMC. - This parameter can be a value of @ref FMC_Write_Operation */ - - uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait - signal, valid for Flash memory access in burst mode. - This parameter can be a value of @ref FMC_Wait_Signal */ - - uint32_t ExtendedMode; /*!< Enables or disables the extended mode. - This parameter can be a value of @ref FMC_Extended_Mode */ - - uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers, - valid only with asynchronous Flash memories. - This parameter can be a value of @ref FMC_AsynchronousWait */ - - uint32_t WriteBurst; /*!< Enables or disables the write burst operation. - This parameter can be a value of @ref FMC_Write_Burst */ - - uint32_t ContinuousClock; /*!< Enables or disables the FMC clock output to external memory devices. - This parameter is only enabled through the FMC_BCR1 register, and don't care - through FMC_BCR2..4 registers. - This parameter can be a value of @ref FMC_Continous_Clock */ - - uint32_t WriteFifo; /*!< Enables or disables the write FIFO used by the FMC controller. - This parameter is only enabled through the FMC_BCR1 register, and don't care - through FMC_BCR2..4 registers. - This parameter can be a value of @ref FMC_Write_FIFO - This mode is available only for the STM32F446xx devices */ - - uint32_t PageSize; /*!< Specifies the memory page size. - This parameter can be a value of @ref FMC_Page_Size - This mode is available only for the STM32F446xx devices */ - -}FMC_NORSRAM_InitTypeDef; - -/** - * @brief FMC NORSRAM Timing parameters structure definition - */ -typedef struct -{ - uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure - the duration of the address setup time. - This parameter can be a value between Min_Data = 0 and Max_Data = 15. - @note This parameter is not used with synchronous NOR Flash memories. */ - - uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure - the duration of the address hold time. - This parameter can be a value between Min_Data = 1 and Max_Data = 15. - @note This parameter is not used with synchronous NOR Flash memories. */ - - uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure - the duration of the data setup time. - This parameter can be a value between Min_Data = 1 and Max_Data = 255. - @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed - NOR Flash memories. */ - - uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure - the duration of the bus turnaround. - This parameter can be a value between Min_Data = 0 and Max_Data = 15. - @note This parameter is only used for multiplexed NOR Flash memories. */ - - uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of - HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16. - @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM - accesses. */ - - uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue - to the memory before getting the first data. - The parameter value depends on the memory type as shown below: - - It must be set to 0 in case of a CRAM - - It is don't care in asynchronous NOR, SRAM or ROM accesses - - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories - with synchronous burst mode enable */ - - uint32_t AccessMode; /*!< Specifies the asynchronous access mode. - This parameter can be a value of @ref FMC_Access_Mode */ -}FMC_NORSRAM_TimingTypeDef; - -/** - * @brief FMC NAND Configuration Structure definition - */ -typedef struct -{ - uint32_t NandBank; /*!< Specifies the NAND memory device that will be used. - This parameter can be a value of @ref FMC_NAND_Bank */ - - uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device. - This parameter can be any value of @ref FMC_Wait_feature */ - - uint32_t MemoryDataWidth; /*!< Specifies the external memory device width. - This parameter can be any value of @ref FMC_NAND_Data_Width */ - - uint32_t EccComputation; /*!< Enables or disables the ECC computation. - This parameter can be any value of @ref FMC_ECC */ - - uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC. - This parameter can be any value of @ref FMC_ECC_Page_Size */ - - uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the - delay between CLE low and RE low. - This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ - - uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the - delay between ALE low and RE low. - This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ -}FMC_NAND_InitTypeDef; - -/** - * @brief FMC NAND/PCCARD Timing parameters structure definition - */ -typedef struct -{ - uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before - the command assertion for NAND-Flash read or write access - to common/Attribute or I/O memory space (depending on - the memory space timing to be configured). - This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ - - uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the - command for NAND-Flash read or write access to - common/Attribute or I/O memory space (depending on the - memory space timing to be configured). - This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ - - uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address - (and data for write access) after the command de-assertion - for NAND-Flash read or write access to common/Attribute - or I/O memory space (depending on the memory space timing - to be configured). - This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ - - uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the - data bus is kept in HiZ after the start of a NAND-Flash - write access to common/Attribute or I/O memory space (depending - on the memory space timing to be configured). - This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ -}FMC_NAND_PCC_TimingTypeDef; - -/** - * @brief FMC NAND Configuration Structure definition - */ -typedef struct -{ - uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the PCCARD Memory device. - This parameter can be any value of @ref FMC_Wait_feature */ - - uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the - delay between CLE low and RE low. - This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ - - uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the - delay between ALE low and RE low. - This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ -}FMC_PCCARD_InitTypeDef; - -/** - * @brief FMC SDRAM Configuration Structure definition - */ -typedef struct -{ - uint32_t SDBank; /*!< Specifies the SDRAM memory device that will be used. - This parameter can be a value of @ref FMC_SDRAM_Bank */ - - uint32_t ColumnBitsNumber; /*!< Defines the number of bits of column address. - This parameter can be a value of @ref FMC_SDRAM_Column_Bits_number. */ - - uint32_t RowBitsNumber; /*!< Defines the number of bits of column address. - This parameter can be a value of @ref FMC_SDRAM_Row_Bits_number. */ - - uint32_t MemoryDataWidth; /*!< Defines the memory device width. - This parameter can be a value of @ref FMC_SDRAM_Memory_Bus_Width. */ - - uint32_t InternalBankNumber; /*!< Defines the number of the device's internal banks. - This parameter can be of @ref FMC_SDRAM_Internal_Banks_Number. */ - - uint32_t CASLatency; /*!< Defines the SDRAM CAS latency in number of memory clock cycles. - This parameter can be a value of @ref FMC_SDRAM_CAS_Latency. */ - - uint32_t WriteProtection; /*!< Enables the SDRAM device to be accessed in write mode. - This parameter can be a value of @ref FMC_SDRAM_Write_Protection. */ - - uint32_t SDClockPeriod; /*!< Define the SDRAM Clock Period for both SDRAM devices and they allow - to disable the clock before changing frequency. - This parameter can be a value of @ref FMC_SDRAM_Clock_Period. */ - - uint32_t ReadBurst; /*!< This bit enable the SDRAM controller to anticipate the next read - commands during the CAS latency and stores data in the Read FIFO. - This parameter can be a value of @ref FMC_SDRAM_Read_Burst. */ - - uint32_t ReadPipeDelay; /*!< Define the delay in system clock cycles on read data path. - This parameter can be a value of @ref FMC_SDRAM_Read_Pipe_Delay. */ -}FMC_SDRAM_InitTypeDef; - -/** - * @brief FMC SDRAM Timing parameters structure definition - */ -typedef struct -{ - uint32_t LoadToActiveDelay; /*!< Defines the delay between a Load Mode Register command and - an active or Refresh command in number of memory clock cycles. - This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ - - uint32_t ExitSelfRefreshDelay; /*!< Defines the delay from releasing the self refresh command to - issuing the Activate command in number of memory clock cycles. - This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ - - uint32_t SelfRefreshTime; /*!< Defines the minimum Self Refresh period in number of memory clock - cycles. - This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ - - uint32_t RowCycleDelay; /*!< Defines the delay between the Refresh command and the Activate command - and the delay between two consecutive Refresh commands in number of - memory clock cycles. - This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ - - uint32_t WriteRecoveryTime; /*!< Defines the Write recovery Time in number of memory clock cycles. - This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ - - uint32_t RPDelay; /*!< Defines the delay between a Precharge Command and an other command - in number of memory clock cycles. - This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ - - uint32_t RCDDelay; /*!< Defines the delay between the Activate Command and a Read/Write - command in number of memory clock cycles. - This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ -}FMC_SDRAM_TimingTypeDef; - -/** - * @brief SDRAM command parameters structure definition - */ -typedef struct -{ - uint32_t CommandMode; /*!< Defines the command issued to the SDRAM device. - This parameter can be a value of @ref FMC_SDRAM_Command_Mode. */ - - uint32_t CommandTarget; /*!< Defines which device (1 or 2) the command will be issued to. - This parameter can be a value of @ref FMC_SDRAM_Command_Target. */ - - uint32_t AutoRefreshNumber; /*!< Defines the number of consecutive auto refresh command issued - in auto refresh mode. - This parameter can be a value between Min_Data = 1 and Max_Data = 16 */ - uint32_t ModeRegisterDefinition; /*!< Defines the SDRAM Mode register content */ -}FMC_SDRAM_CommandTypeDef; -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup FMC_LL_Private_Constants FMC Private Constants - * @{ - */ - -/** @defgroup FMC_LL_NOR_SRAM_Controller FMC NOR/SRAM Controller - * @{ - */ -/** @defgroup FMC_NORSRAM_Bank FMC NOR/SRAM Bank - * @{ - */ -#define FMC_NORSRAM_BANK1 ((uint32_t)0x00000000) -#define FMC_NORSRAM_BANK2 ((uint32_t)0x00000002) -#define FMC_NORSRAM_BANK3 ((uint32_t)0x00000004) -#define FMC_NORSRAM_BANK4 ((uint32_t)0x00000006) -/** - * @} - */ - -/** @defgroup FMC_Data_Address_Bus_Multiplexing FMC Data Address Bus Multiplexing - * @{ - */ -#define FMC_DATA_ADDRESS_MUX_DISABLE ((uint32_t)0x00000000) -#define FMC_DATA_ADDRESS_MUX_ENABLE ((uint32_t)0x00000002) -/** - * @} - */ - -/** @defgroup FMC_Memory_Type FMC Memory Type - * @{ - */ -#define FMC_MEMORY_TYPE_SRAM ((uint32_t)0x00000000) -#define FMC_MEMORY_TYPE_PSRAM ((uint32_t)0x00000004) -#define FMC_MEMORY_TYPE_NOR ((uint32_t)0x00000008) -/** - * @} - */ - -/** @defgroup FMC_NORSRAM_Data_Width FMC NORSRAM Data Width - * @{ - */ -#define FMC_NORSRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000) -#define FMC_NORSRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010) -#define FMC_NORSRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020) -/** - * @} - */ - -/** @defgroup FMC_NORSRAM_Flash_Access FMC NOR/SRAM Flash Access - * @{ - */ -#define FMC_NORSRAM_FLASH_ACCESS_ENABLE ((uint32_t)0x00000040) -#define FMC_NORSRAM_FLASH_ACCESS_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup FMC_Burst_Access_Mode FMC Burst Access Mode - * @{ - */ -#define FMC_BURST_ACCESS_MODE_DISABLE ((uint32_t)0x00000000) -#define FMC_BURST_ACCESS_MODE_ENABLE ((uint32_t)0x00000100) -/** - * @} - */ - -/** @defgroup FMC_Wait_Signal_Polarity FMC Wait Signal Polarity - * @{ - */ -#define FMC_WAIT_SIGNAL_POLARITY_LOW ((uint32_t)0x00000000) -#define FMC_WAIT_SIGNAL_POLARITY_HIGH ((uint32_t)0x00000200) -/** - * @} - */ - -/** @defgroup FMC_Wrap_Mode FMC Wrap Mode - * @{ - */ -/** @note This mode is not available for the STM32F446xx devices - */ -#define FMC_WRAP_MODE_DISABLE ((uint32_t)0x00000000) -#define FMC_WRAP_MODE_ENABLE ((uint32_t)0x00000400) -/** - * @} - */ - -/** @defgroup FMC_Wait_Timing FMC Wait Timing - * @{ - */ -#define FMC_WAIT_TIMING_BEFORE_WS ((uint32_t)0x00000000) -#define FMC_WAIT_TIMING_DURING_WS ((uint32_t)0x00000800) -/** - * @} - */ - -/** @defgroup FMC_Write_Operation FMC Write Operation - * @{ - */ -#define FMC_WRITE_OPERATION_DISABLE ((uint32_t)0x00000000) -#define FMC_WRITE_OPERATION_ENABLE ((uint32_t)0x00001000) -/** - * @} - */ - -/** @defgroup FMC_Wait_Signal FMC Wait Signal - * @{ - */ -#define FMC_WAIT_SIGNAL_DISABLE ((uint32_t)0x00000000) -#define FMC_WAIT_SIGNAL_ENABLE ((uint32_t)0x00002000) -/** - * @} - */ - -/** @defgroup FMC_Extended_Mode FMC Extended Mode - * @{ - */ -#define FMC_EXTENDED_MODE_DISABLE ((uint32_t)0x00000000) -#define FMC_EXTENDED_MODE_ENABLE ((uint32_t)0x00004000) -/** - * @} - */ - -/** @defgroup FMC_AsynchronousWait FMC Asynchronous Wait - * @{ - */ -#define FMC_ASYNCHRONOUS_WAIT_DISABLE ((uint32_t)0x00000000) -#define FMC_ASYNCHRONOUS_WAIT_ENABLE ((uint32_t)0x00008000) -/** - * @} - */ - -/** @defgroup FMC_Page_Size FMC Page Size - * @note These values are available only for the STM32F446xx devices. - * @{ - */ -#define FMC_PAGE_SIZE_NONE ((uint32_t)0x00000000) -#define FMC_PAGE_SIZE_128 ((uint32_t)FMC_BCR1_CPSIZE_0) -#define FMC_PAGE_SIZE_256 ((uint32_t)FMC_BCR1_CPSIZE_1) -#define FMC_PAGE_SIZE_1024 ((uint32_t)FMC_BCR1_CPSIZE_2) -/** - * @} - */ - -/** @defgroup FMC_Write_FIFO FMC Write FIFO - * @note These values are available only for the STM32F446xx devices. - * @{ - */ -#define FMC_WRITE_FIFO_DISABLE ((uint32_t)0x00000000) -#define FMC_WRITE_FIFO_ENABLE ((uint32_t)FMC_BCR1_WFDIS) -/** - * @} - */ - -/** @defgroup FMC_Write_Burst FMC Write Burst - * @{ - */ -#define FMC_WRITE_BURST_DISABLE ((uint32_t)0x00000000) -#define FMC_WRITE_BURST_ENABLE ((uint32_t)0x00080000) -/** - * @} - */ - -/** @defgroup FMC_Continous_Clock FMC Continuous Clock - * @{ - */ -#define FMC_CONTINUOUS_CLOCK_SYNC_ONLY ((uint32_t)0x00000000) -#define FMC_CONTINUOUS_CLOCK_SYNC_ASYNC ((uint32_t)0x00100000) -/** - * @} - */ - -/** @defgroup FMC_Access_Mode FMC Access Mode - * @{ - */ -#define FMC_ACCESS_MODE_A ((uint32_t)0x00000000) -#define FMC_ACCESS_MODE_B ((uint32_t)0x10000000) -#define FMC_ACCESS_MODE_C ((uint32_t)0x20000000) -#define FMC_ACCESS_MODE_D ((uint32_t)0x30000000) -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup FMC_LL_NAND_Controller FMC NAND Controller - * @{ - */ -/** @defgroup FMC_NAND_Bank FMC NAND Bank - * @{ - */ -#define FMC_NAND_BANK2 ((uint32_t)0x00000010) -#define FMC_NAND_BANK3 ((uint32_t)0x00000100) -/** - * @} - */ - -/** @defgroup FMC_Wait_feature FMC Wait feature - * @{ - */ -#define FMC_NAND_PCC_WAIT_FEATURE_DISABLE ((uint32_t)0x00000000) -#define FMC_NAND_PCC_WAIT_FEATURE_ENABLE ((uint32_t)0x00000002) -/** - * @} - */ - -/** @defgroup FMC_PCR_Memory_Type FMC PCR Memory Type - * @{ - */ -#define FMC_PCR_MEMORY_TYPE_PCCARD ((uint32_t)0x00000000) -#define FMC_PCR_MEMORY_TYPE_NAND ((uint32_t)0x00000008) -/** - * @} - */ - -/** @defgroup FMC_NAND_Data_Width FMC NAND Data Width - * @{ - */ -#define FMC_NAND_PCC_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000) -#define FMC_NAND_PCC_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010) -/** - * @} - */ - -/** @defgroup FMC_ECC FMC ECC - * @{ - */ -#define FMC_NAND_ECC_DISABLE ((uint32_t)0x00000000) -#define FMC_NAND_ECC_ENABLE ((uint32_t)0x00000040) -/** - * @} - */ - -/** @defgroup FMC_ECC_Page_Size FMC ECC Page Size - * @{ - */ -#define FMC_NAND_ECC_PAGE_SIZE_256BYTE ((uint32_t)0x00000000) -#define FMC_NAND_ECC_PAGE_SIZE_512BYTE ((uint32_t)0x00020000) -#define FMC_NAND_ECC_PAGE_SIZE_1024BYTE ((uint32_t)0x00040000) -#define FMC_NAND_ECC_PAGE_SIZE_2048BYTE ((uint32_t)0x00060000) -#define FMC_NAND_ECC_PAGE_SIZE_4096BYTE ((uint32_t)0x00080000) -#define FMC_NAND_ECC_PAGE_SIZE_8192BYTE ((uint32_t)0x000A0000) -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup FMC_LL_SDRAM_Controller FMC SDRAM Controller - * @{ - */ -/** @defgroup FMC_SDRAM_Bank FMC SDRAM Bank - * @{ - */ -#define FMC_SDRAM_BANK1 ((uint32_t)0x00000000) -#define FMC_SDRAM_BANK2 ((uint32_t)0x00000001) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Column_Bits_number FMC SDRAM Column Bits number - * @{ - */ -#define FMC_SDRAM_COLUMN_BITS_NUM_8 ((uint32_t)0x00000000) -#define FMC_SDRAM_COLUMN_BITS_NUM_9 ((uint32_t)0x00000001) -#define FMC_SDRAM_COLUMN_BITS_NUM_10 ((uint32_t)0x00000002) -#define FMC_SDRAM_COLUMN_BITS_NUM_11 ((uint32_t)0x00000003) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Row_Bits_number FMC SDRAM Row Bits number - * @{ - */ -#define FMC_SDRAM_ROW_BITS_NUM_11 ((uint32_t)0x00000000) -#define FMC_SDRAM_ROW_BITS_NUM_12 ((uint32_t)0x00000004) -#define FMC_SDRAM_ROW_BITS_NUM_13 ((uint32_t)0x00000008) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Memory_Bus_Width FMC SDRAM Memory Bus Width - * @{ - */ -#define FMC_SDRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000) -#define FMC_SDRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010) -#define FMC_SDRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Internal_Banks_Number FMC SDRAM Internal Banks Number - * @{ - */ -#define FMC_SDRAM_INTERN_BANKS_NUM_2 ((uint32_t)0x00000000) -#define FMC_SDRAM_INTERN_BANKS_NUM_4 ((uint32_t)0x00000040) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_CAS_Latency FMC SDRAM CAS Latency - * @{ - */ -#define FMC_SDRAM_CAS_LATENCY_1 ((uint32_t)0x00000080) -#define FMC_SDRAM_CAS_LATENCY_2 ((uint32_t)0x00000100) -#define FMC_SDRAM_CAS_LATENCY_3 ((uint32_t)0x00000180) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Write_Protection FMC SDRAM Write Protection - * @{ - */ -#define FMC_SDRAM_WRITE_PROTECTION_DISABLE ((uint32_t)0x00000000) -#define FMC_SDRAM_WRITE_PROTECTION_ENABLE ((uint32_t)0x00000200) - -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Clock_Period FMC SDRAM Clock Period - * @{ - */ -#define FMC_SDRAM_CLOCK_DISABLE ((uint32_t)0x00000000) -#define FMC_SDRAM_CLOCK_PERIOD_2 ((uint32_t)0x00000800) -#define FMC_SDRAM_CLOCK_PERIOD_3 ((uint32_t)0x00000C00) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Read_Burst FMC SDRAM Read Burst - * @{ - */ -#define FMC_SDRAM_RBURST_DISABLE ((uint32_t)0x00000000) -#define FMC_SDRAM_RBURST_ENABLE ((uint32_t)0x00001000) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Read_Pipe_Delay FMC SDRAM Read Pipe Delay - * @{ - */ -#define FMC_SDRAM_RPIPE_DELAY_0 ((uint32_t)0x00000000) -#define FMC_SDRAM_RPIPE_DELAY_1 ((uint32_t)0x00002000) -#define FMC_SDRAM_RPIPE_DELAY_2 ((uint32_t)0x00004000) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Command_Mode FMC SDRAM Command Mode - * @{ - */ -#define FMC_SDRAM_CMD_NORMAL_MODE ((uint32_t)0x00000000) -#define FMC_SDRAM_CMD_CLK_ENABLE ((uint32_t)0x00000001) -#define FMC_SDRAM_CMD_PALL ((uint32_t)0x00000002) -#define FMC_SDRAM_CMD_AUTOREFRESH_MODE ((uint32_t)0x00000003) -#define FMC_SDRAM_CMD_LOAD_MODE ((uint32_t)0x00000004) -#define FMC_SDRAM_CMD_SELFREFRESH_MODE ((uint32_t)0x00000005) -#define FMC_SDRAM_CMD_POWERDOWN_MODE ((uint32_t)0x00000006) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Command_Target FMC SDRAM Command Target - * @{ - */ -#define FMC_SDRAM_CMD_TARGET_BANK2 FMC_SDCMR_CTB2 -#define FMC_SDRAM_CMD_TARGET_BANK1 FMC_SDCMR_CTB1 -#define FMC_SDRAM_CMD_TARGET_BANK1_2 ((uint32_t)0x00000018) -/** - * @} - */ - -/** @defgroup FMC_SDRAM_Mode_Status FMC SDRAM Mode Status - * @{ - */ -#define FMC_SDRAM_NORMAL_MODE ((uint32_t)0x00000000) -#define FMC_SDRAM_SELF_REFRESH_MODE FMC_SDSR_MODES1_0 -#define FMC_SDRAM_POWER_DOWN_MODE FMC_SDSR_MODES1_1 -/** - * @} - */ - -/** - * @} - */ - -/** @defgroup FMC_LL_Interrupt_definition FMC Interrupt definition - * @{ - */ -#define FMC_IT_RISING_EDGE ((uint32_t)0x00000008) -#define FMC_IT_LEVEL ((uint32_t)0x00000010) -#define FMC_IT_FALLING_EDGE ((uint32_t)0x00000020) -#define FMC_IT_REFRESH_ERROR ((uint32_t)0x00004000) -/** - * @} - */ - -/** @defgroup FMC_LL_Flag_definition FMC Flag definition - * @{ - */ -#define FMC_FLAG_RISING_EDGE ((uint32_t)0x00000001) -#define FMC_FLAG_LEVEL ((uint32_t)0x00000002) -#define FMC_FLAG_FALLING_EDGE ((uint32_t)0x00000004) -#define FMC_FLAG_FEMPT ((uint32_t)0x00000040) -#define FMC_SDRAM_FLAG_REFRESH_IT FMC_SDSR_RE -#define FMC_SDRAM_FLAG_BUSY FMC_SDSR_BUSY -#define FMC_SDRAM_FLAG_REFRESH_ERROR FMC_SDRTR_CRE -/** - * @} - */ - -/** @defgroup FMC_LL_Alias_definition FMC Alias definition - * @{ - */ -#if defined(STM32F446xx) - #define FMC_NAND_TypeDef FMC_Bank3_TypeDef -#else - #define FMC_NAND_TypeDef FMC_Bank2_3_TypeDef - #define FMC_PCCARD_TypeDef FMC_Bank4_TypeDef -#endif /* defined(STM32F446xx) */ - #define FMC_NORSRAM_TypeDef FMC_Bank1_TypeDef - #define FMC_NORSRAM_EXTENDED_TypeDef FMC_Bank1E_TypeDef - #define FMC_SDRAM_TypeDef FMC_Bank5_6_TypeDef - - -#if defined(STM32F446xx) - #define FMC_NAND_DEVICE FMC_Bank3 -#else - #define FMC_NAND_DEVICE FMC_Bank2_3 - #define FMC_PCCARD_DEVICE FMC_Bank4 -#endif /* defined(STM32F446xx) */ - #define FMC_NORSRAM_DEVICE FMC_Bank1 - #define FMC_NORSRAM_EXTENDED_DEVICE FMC_Bank1E - #define FMC_SDRAM_DEVICE FMC_Bank5_6 -/** - * @} - */ - -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/** @defgroup FMC_LL_Private_Macros FMC Private Macros - * @{ - */ - -/** @defgroup FMC_LL_NOR_Macros FMC NOR/SRAM Macros - * @brief macros to handle NOR device enable/disable and read/write operations - * @{ - */ -/** - * @brief Enable the NORSRAM device access. - * @param __INSTANCE__: FMC_NORSRAM Instance - * @param __BANK__: FMC_NORSRAM Bank - * @retval None - */ -#define __FMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] |= FMC_BCR1_MBKEN) - -/** - * @brief Disable the NORSRAM device access. - * @param __INSTANCE__: FMC_NORSRAM Instance - * @param __BANK__: FMC_NORSRAM Bank - * @retval None - */ -#define __FMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] &= ~FMC_BCR1_MBKEN) -/** - * @} - */ - -/** @defgroup FMC_LL_NAND_Macros FMC NAND Macros - * @brief macros to handle NAND device enable/disable - * @{ - */ -#if defined(STM32F446xx) -/** - * @brief Enable the NAND device access. - * @param __INSTANCE__: FMC_NAND Instance - * @param __BANK__: FMC_NAND Bank - * @retval None - */ -#define __FMC_NAND_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->PCR |= FMC_PCR_PBKEN) - -/** - * @brief Disable the NAND device access. - * @param __INSTANCE__: FMC_NAND Instance - * @param __BANK__: FMC_NAND Bank - * @retval None - */ -#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->PCR &= ~FMC_PCR_PBKEN) -#else /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */ -/** - * @brief Enable the NAND device access. - * @param __INSTANCE__: FMC_NAND Instance - * @param __BANK__: FMC_NAND Bank - * @retval None - */ -#define __FMC_NAND_ENABLE(__INSTANCE__, __BANK__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FMC_PCR2_PBKEN): \ - ((__INSTANCE__)->PCR3 |= FMC_PCR3_PBKEN)) - -/** - * @brief Disable the NAND device access. - * @param __INSTANCE__: FMC_NAND Instance - * @param __BANK__: FMC_NAND Bank - * @retval None - */ -#define __FMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 &= ~FMC_PCR2_PBKEN): \ - ((__INSTANCE__)->PCR3 &= ~FMC_PCR3_PBKEN)) - -#endif /* defined(STM32F446xx)*/ -/** - * @} - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -/** @defgroup FMC_LL_PCCARD_Macros FMC PCCARD Macros - * @brief macros to handle SRAM read/write operations - * @{ - */ -/** - * @brief Enable the PCCARD device access. - * @param __INSTANCE__: FMC_PCCARD Instance - * @retval None - */ -#define __FMC_PCCARD_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 |= FMC_PCR4_PBKEN) - -/** - * @brief Disable the PCCARD device access. - * @param __INSTANCE__: FMC_PCCARD Instance - * @retval None - */ -#define __FMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FMC_PCR4_PBKEN) -/** - * @} - */ -#endif /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */ - -/** @defgroup FMC_LL_Flag_Interrupt_Macros FMC Flag&Interrupt Macros - * @brief macros to handle FMC flags and interrupts - * @{ - */ -#if defined(STM32F446xx) -/** - * @brief Enable the NAND device interrupt. - * @param __INSTANCE__: FMC_NAND instance - * @param __BANK__: FMC_NAND Bank - * @param __INTERRUPT__: FMC_NAND interrupt - * This parameter can be any combination of the following values: - * @arg FMC_IT_RISING_EDGE: Interrupt rising edge. - * @arg FMC_IT_LEVEL: Interrupt level. - * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge. - * @retval None - */ -#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) ((__INSTANCE__)->SR |= (__INTERRUPT__)) - -/** - * @brief Disable the NAND device interrupt. - * @param __INSTANCE__: FMC_NAND Instance - * @param __BANK__: FMC_NAND Bank - * @param __INTERRUPT__: FMC_NAND interrupt - * This parameter can be any combination of the following values: - * @arg FMC_IT_RISING_EDGE: Interrupt rising edge. - * @arg FMC_IT_LEVEL: Interrupt level. - * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge. - * @retval None - */ -#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) ((__INSTANCE__)->SR &= ~(__INTERRUPT__)) - -/** - * @brief Get flag status of the NAND device. - * @param __INSTANCE__: FMC_NAND Instance - * @param __BANK__: FMC_NAND Bank - * @param __FLAG__: FMC_NAND flag - * This parameter can be any combination of the following values: - * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag. - * @arg FMC_FLAG_LEVEL: Interrupt level edge flag. - * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. - * @arg FMC_FLAG_FEMPT: FIFO empty flag. - * @retval The state of FLAG (SET or RESET). - */ -#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__INSTANCE__)->SR &(__FLAG__)) == (__FLAG__)) -/** - * @brief Clear flag status of the NAND device. - * @param __INSTANCE__: FMC_NAND Instance - * @param __BANK__: FMC_NAND Bank - * @param __FLAG__: FMC_NAND flag - * This parameter can be any combination of the following values: - * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag. - * @arg FMC_FLAG_LEVEL: Interrupt level edge flag. - * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. - * @arg FMC_FLAG_FEMPT: FIFO empty flag. - * @retval None - */ -#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) ((__INSTANCE__)->SR &= ~(__FLAG__)) -#else /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */ -/** - * @brief Enable the NAND device interrupt. - * @param __INSTANCE__: FMC_NAND instance - * @param __BANK__: FMC_NAND Bank - * @param __INTERRUPT__: FMC_NAND interrupt - * This parameter can be any combination of the following values: - * @arg FMC_IT_RISING_EDGE: Interrupt rising edge. - * @arg FMC_IT_LEVEL: Interrupt level. - * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge. - * @retval None - */ -#define __FMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 |= (__INTERRUPT__)): \ - ((__INSTANCE__)->SR3 |= (__INTERRUPT__))) - -/** - * @brief Disable the NAND device interrupt. - * @param __INSTANCE__: FMC_NAND Instance - * @param __BANK__: FMC_NAND Bank - * @param __INTERRUPT__: FMC_NAND interrupt - * This parameter can be any combination of the following values: - * @arg FMC_IT_RISING_EDGE: Interrupt rising edge. - * @arg FMC_IT_LEVEL: Interrupt level. - * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge. - * @retval None - */ -#define __FMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__INTERRUPT__)): \ - ((__INSTANCE__)->SR3 &= ~(__INTERRUPT__))) - -/** - * @brief Get flag status of the NAND device. - * @param __INSTANCE__: FMC_NAND Instance - * @param __BANK__: FMC_NAND Bank - * @param __FLAG__: FMC_NAND flag - * This parameter can be any combination of the following values: - * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag. - * @arg FMC_FLAG_LEVEL: Interrupt level edge flag. - * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. - * @arg FMC_FLAG_FEMPT: FIFO empty flag. - * @retval The state of FLAG (SET or RESET). - */ -#define __FMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FMC_NAND_BANK2)? (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)): \ - (((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__))) -/** - * @brief Clear flag status of the NAND device. - * @param __INSTANCE__: FMC_NAND Instance - * @param __BANK__: FMC_NAND Bank - * @param __FLAG__: FMC_NAND flag - * This parameter can be any combination of the following values: - * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag. - * @arg FMC_FLAG_LEVEL: Interrupt level edge flag. - * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. - * @arg FMC_FLAG_FEMPT: FIFO empty flag. - * @retval None - */ -#define __FMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__FLAG__)): \ - ((__INSTANCE__)->SR3 &= ~(__FLAG__))) -#endif /* defined(STM32F446xx) */ - -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -/** - * @brief Enable the PCCARD device interrupt. - * @param __INSTANCE__: FMC_PCCARD instance - * @param __INTERRUPT__: FMC_PCCARD interrupt - * This parameter can be any combination of the following values: - * @arg FMC_IT_RISING_EDGE: Interrupt rising edge. - * @arg FMC_IT_LEVEL: Interrupt level. - * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge. - * @retval None - */ -#define __FMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 |= (__INTERRUPT__)) - -/** - * @brief Disable the PCCARD device interrupt. - * @param __INSTANCE__: FMC_PCCARD instance - * @param __INTERRUPT__: FMC_PCCARD interrupt - * This parameter can be any combination of the following values: - * @arg FMC_IT_RISING_EDGE: Interrupt rising edge. - * @arg FMC_IT_LEVEL: Interrupt level. - * @arg FMC_IT_FALLING_EDGE: Interrupt falling edge. - * @retval None - */ -#define __FMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 &= ~(__INTERRUPT__)) - -/** - * @brief Get flag status of the PCCARD device. - * @param __INSTANCE__: FMC_PCCARD instance - * @param __FLAG__: FMC_PCCARD flag - * This parameter can be any combination of the following values: - * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag. - * @arg FMC_FLAG_LEVEL: Interrupt level edge flag. - * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. - * @arg FMC_FLAG_FEMPT: FIFO empty flag. - * @retval The state of FLAG (SET or RESET). - */ -#define __FMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__)) - -/** - * @brief Clear flag status of the PCCARD device. - * @param __INSTANCE__: FMC_PCCARD instance - * @param __FLAG__: FMC_PCCARD flag - * This parameter can be any combination of the following values: - * @arg FMC_FLAG_RISING_EDGE: Interrupt rising edge flag. - * @arg FMC_FLAG_LEVEL: Interrupt level edge flag. - * @arg FMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. - * @arg FMC_FLAG_FEMPT: FIFO empty flag. - * @retval None - */ -#define __FMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR4 &= ~(__FLAG__)) -#endif /* defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) */ - -/** - * @brief Enable the SDRAM device interrupt. - * @param __INSTANCE__: FMC_SDRAM instance - * @param __INTERRUPT__: FMC_SDRAM interrupt - * This parameter can be any combination of the following values: - * @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error - * @retval None - */ -#define __FMC_SDRAM_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR |= (__INTERRUPT__)) - -/** - * @brief Disable the SDRAM device interrupt. - * @param __INSTANCE__: FMC_SDRAM instance - * @param __INTERRUPT__: FMC_SDRAM interrupt - * This parameter can be any combination of the following values: - * @arg FMC_IT_REFRESH_ERROR: Interrupt refresh error - * @retval None - */ -#define __FMC_SDRAM_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SDRTR &= ~(__INTERRUPT__)) - -/** - * @brief Get flag status of the SDRAM device. - * @param __INSTANCE__: FMC_SDRAM instance - * @param __FLAG__: FMC_SDRAM flag - * This parameter can be any combination of the following values: - * @arg FMC_SDRAM_FLAG_REFRESH_IT: Interrupt refresh error. - * @arg FMC_SDRAM_FLAG_BUSY: SDRAM busy flag. - * @arg FMC_SDRAM_FLAG_REFRESH_ERROR: Refresh error flag. - * @retval The state of FLAG (SET or RESET). - */ -#define __FMC_SDRAM_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SDSR &(__FLAG__)) == (__FLAG__)) - -/** - * @brief Clear flag status of the SDRAM device. - * @param __INSTANCE__: FMC_SDRAM instance - * @param __FLAG__: FMC_SDRAM flag - * This parameter can be any combination of the following values: - * @arg FMC_SDRAM_FLAG_REFRESH_ERROR - * @retval None - */ -#define __FMC_SDRAM_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SDRTR |= (__FLAG__)) -/** - * @} - */ - -/** @defgroup FSMC_LL_Assert_Macros FSMC Assert Macros - * @{ - */ -#define IS_FMC_NORSRAM_BANK(BANK) (((BANK) == FMC_NORSRAM_BANK1) || \ - ((BANK) == FMC_NORSRAM_BANK2) || \ - ((BANK) == FMC_NORSRAM_BANK3) || \ - ((BANK) == FMC_NORSRAM_BANK4)) - -#define IS_FMC_MUX(__MUX__) (((__MUX__) == FMC_DATA_ADDRESS_MUX_DISABLE) || \ - ((__MUX__) == FMC_DATA_ADDRESS_MUX_ENABLE)) - -#define IS_FMC_MEMORY(__MEMORY__) (((__MEMORY__) == FMC_MEMORY_TYPE_SRAM) || \ - ((__MEMORY__) == FMC_MEMORY_TYPE_PSRAM)|| \ - ((__MEMORY__) == FMC_MEMORY_TYPE_NOR)) - -#define IS_FMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_8) || \ - ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_16) || \ - ((__WIDTH__) == FMC_NORSRAM_MEM_BUS_WIDTH_32)) - -#define IS_FMC_ACCESS_MODE(__MODE__) (((__MODE__) == FMC_ACCESS_MODE_A) || \ - ((__MODE__) == FMC_ACCESS_MODE_B) || \ - ((__MODE__) == FMC_ACCESS_MODE_C) || \ - ((__MODE__) == FMC_ACCESS_MODE_D)) - -#define IS_FMC_NAND_BANK(BANK) (((BANK) == FMC_NAND_BANK2) || \ - ((BANK) == FMC_NAND_BANK3)) - -#define IS_FMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \ - ((FEATURE) == FMC_NAND_PCC_WAIT_FEATURE_ENABLE)) - -#define IS_FMC_NAND_MEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_NAND_PCC_MEM_BUS_WIDTH_8) || \ - ((WIDTH) == FMC_NAND_PCC_MEM_BUS_WIDTH_16)) - -#define IS_FMC_ECC_STATE(STATE) (((STATE) == FMC_NAND_ECC_DISABLE) || \ - ((STATE) == FMC_NAND_ECC_ENABLE)) - -#define IS_FMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FMC_NAND_ECC_PAGE_SIZE_256BYTE) || \ - ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_512BYTE) || \ - ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \ - ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \ - ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \ - ((SIZE) == FMC_NAND_ECC_PAGE_SIZE_8192BYTE)) - -#define IS_FMC_TCLR_TIME(TIME) ((TIME) <= 255) - -#define IS_FMC_TAR_TIME(TIME) ((TIME) <= 255) - -#define IS_FMC_SETUP_TIME(TIME) ((TIME) <= 255) - -#define IS_FMC_WAIT_TIME(TIME) ((TIME) <= 255) - -#define IS_FMC_HOLD_TIME(TIME) ((TIME) <= 255) - -#define IS_FMC_HIZ_TIME(TIME) ((TIME) <= 255) - -#define IS_FMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_DEVICE) - -#define IS_FMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NORSRAM_EXTENDED_DEVICE) - -#define IS_FMC_NAND_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_NAND_DEVICE) - -#define IS_FMC_PCCARD_DEVICE(__INSTANCE__) ((__INSTANCE__) == FMC_PCCARD_DEVICE) - -#define IS_FMC_BURSTMODE(__STATE__) (((__STATE__) == FMC_BURST_ACCESS_MODE_DISABLE) || \ - ((__STATE__) == FMC_BURST_ACCESS_MODE_ENABLE)) - -#define IS_FMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_LOW) || \ - ((__POLARITY__) == FMC_WAIT_SIGNAL_POLARITY_HIGH)) - -#if !defined (STM32F446xx) -#define IS_FMC_WRAP_MODE(__MODE__) (((__MODE__) == FMC_WRAP_MODE_DISABLE) || \ - ((__MODE__) == FMC_WRAP_MODE_ENABLE)) -#endif /* !defined (STM32F446xx) */ - -#define IS_FMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FMC_WAIT_TIMING_BEFORE_WS) || \ - ((__ACTIVE__) == FMC_WAIT_TIMING_DURING_WS)) - -#define IS_FMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FMC_WRITE_OPERATION_DISABLE) || \ - ((__OPERATION__) == FMC_WRITE_OPERATION_ENABLE)) - -#define IS_FMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FMC_WAIT_SIGNAL_DISABLE) || \ - ((__SIGNAL__) == FMC_WAIT_SIGNAL_ENABLE)) - -#define IS_FMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FMC_EXTENDED_MODE_DISABLE) || \ - ((__MODE__) == FMC_EXTENDED_MODE_ENABLE)) - -#define IS_FMC_ASYNWAIT(__STATE__) (((__STATE__) == FMC_ASYNCHRONOUS_WAIT_DISABLE) || \ - ((__STATE__) == FMC_ASYNCHRONOUS_WAIT_ENABLE)) - -#define IS_FMC_WRITE_BURST(__BURST__) (((__BURST__) == FMC_WRITE_BURST_DISABLE) || \ - ((__BURST__) == FMC_WRITE_BURST_ENABLE)) - -#define IS_FMC_CONTINOUS_CLOCK(CCLOCK) (((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \ - ((CCLOCK) == FMC_CONTINUOUS_CLOCK_SYNC_ASYNC)) - -#define IS_FMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15) - -#define IS_FMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 15)) - -#define IS_FMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 255)) - -#define IS_FMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15) - -#define IS_FMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1) && ((__LATENCY__) <= 17)) - -#define IS_FMC_CLK_DIV(DIV) (((DIV) > 1) && ((DIV) <= 16)) - -#define IS_FMC_SDRAM_BANK(BANK) (((BANK) == FMC_SDRAM_BANK1) || \ - ((BANK) == FMC_SDRAM_BANK2)) - -#define IS_FMC_COLUMNBITS_NUMBER(COLUMN) (((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_8) || \ - ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_9) || \ - ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_10) || \ - ((COLUMN) == FMC_SDRAM_COLUMN_BITS_NUM_11)) - -#define IS_FMC_ROWBITS_NUMBER(ROW) (((ROW) == FMC_SDRAM_ROW_BITS_NUM_11) || \ - ((ROW) == FMC_SDRAM_ROW_BITS_NUM_12) || \ - ((ROW) == FMC_SDRAM_ROW_BITS_NUM_13)) - -#define IS_FMC_SDMEMORY_WIDTH(WIDTH) (((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_8) || \ - ((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_16) || \ - ((WIDTH) == FMC_SDRAM_MEM_BUS_WIDTH_32)) - -#define IS_FMC_INTERNALBANK_NUMBER(NUMBER) (((NUMBER) == FMC_SDRAM_INTERN_BANKS_NUM_2) || \ - ((NUMBER) == FMC_SDRAM_INTERN_BANKS_NUM_4)) - - -#define IS_FMC_CAS_LATENCY(LATENCY) (((LATENCY) == FMC_SDRAM_CAS_LATENCY_1) || \ - ((LATENCY) == FMC_SDRAM_CAS_LATENCY_2) || \ - ((LATENCY) == FMC_SDRAM_CAS_LATENCY_3)) - -#define IS_FMC_SDCLOCK_PERIOD(PERIOD) (((PERIOD) == FMC_SDRAM_CLOCK_DISABLE) || \ - ((PERIOD) == FMC_SDRAM_CLOCK_PERIOD_2) || \ - ((PERIOD) == FMC_SDRAM_CLOCK_PERIOD_3)) - -#define IS_FMC_READ_BURST(RBURST) (((RBURST) == FMC_SDRAM_RBURST_DISABLE) || \ - ((RBURST) == FMC_SDRAM_RBURST_ENABLE)) - - -#define IS_FMC_READPIPE_DELAY(DELAY) (((DELAY) == FMC_SDRAM_RPIPE_DELAY_0) || \ - ((DELAY) == FMC_SDRAM_RPIPE_DELAY_1) || \ - ((DELAY) == FMC_SDRAM_RPIPE_DELAY_2)) - -#define IS_FMC_LOADTOACTIVE_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16)) - -#define IS_FMC_EXITSELFREFRESH_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16)) - -#define IS_FMC_SELFREFRESH_TIME(TIME) (((TIME) > 0) && ((TIME) <= 16)) - -#define IS_FMC_ROWCYCLE_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16)) - -#define IS_FMC_WRITE_RECOVERY_TIME(TIME) (((TIME) > 0) && ((TIME) <= 16)) - -#define IS_FMC_RP_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16)) - -#define IS_FMC_RCD_DELAY(DELAY) (((DELAY) > 0) && ((DELAY) <= 16)) - -#define IS_FMC_COMMAND_MODE(COMMAND) (((COMMAND) == FMC_SDRAM_CMD_NORMAL_MODE) || \ - ((COMMAND) == FMC_SDRAM_CMD_CLK_ENABLE) || \ - ((COMMAND) == FMC_SDRAM_CMD_PALL) || \ - ((COMMAND) == FMC_SDRAM_CMD_AUTOREFRESH_MODE) || \ - ((COMMAND) == FMC_SDRAM_CMD_LOAD_MODE) || \ - ((COMMAND) == FMC_SDRAM_CMD_SELFREFRESH_MODE) || \ - ((COMMAND) == FMC_SDRAM_CMD_POWERDOWN_MODE)) - -#define IS_FMC_COMMAND_TARGET(TARGET) (((TARGET) == FMC_SDRAM_CMD_TARGET_BANK1) || \ - ((TARGET) == FMC_SDRAM_CMD_TARGET_BANK2) || \ - ((TARGET) == FMC_SDRAM_CMD_TARGET_BANK1_2)) - -#define IS_FMC_AUTOREFRESH_NUMBER(NUMBER) (((NUMBER) > 0) && ((NUMBER) <= 16)) - -#define IS_FMC_MODE_REGISTER(CONTENT) ((CONTENT) <= 8191) - -#define IS_FMC_REFRESH_RATE(RATE) ((RATE) <= 8191) - -#define IS_FMC_SDRAM_DEVICE(INSTANCE) ((INSTANCE) == FMC_SDRAM_DEVICE) - -#define IS_FMC_WRITE_PROTECTION(WRITE) (((WRITE) == FMC_SDRAM_WRITE_PROTECTION_DISABLE) || \ - ((WRITE) == FMC_SDRAM_WRITE_PROTECTION_ENABLE)) - -#if defined (STM32F446xx) -#define IS_FMC_PAGESIZE(SIZE) (((SIZE) == FMC_PAGE_SIZE_NONE) || \ - ((SIZE) == FMC_PAGE_SIZE_128) || \ - ((SIZE) == FMC_PAGE_SIZE_256) || \ - ((SIZE) == FMC_PAGE_SIZE_1024)) - -#define IS_FMC_WRITE_FIFO(FIFO) (((FIFO) == FMC_WRITE_FIFO_DISABLE) || \ - ((FIFO) == FMC_WRITE_FIFO_ENABLE)) -#endif /* defined (STM32F446xx) */ - -/** - * @} - */ - -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup FMC_LL_Private_Functions FMC LL Private Functions - * @{ - */ - -/** @defgroup FMC_LL_NORSRAM NOR SRAM - * @{ - */ -/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group1 NOR SRAM Initialization/de-initialization functions - * @{ - */ -HAL_StatusTypeDef FMC_NORSRAM_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_InitTypeDef *Init); -HAL_StatusTypeDef FMC_NORSRAM_Timing_Init(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank); -HAL_StatusTypeDef FMC_NORSRAM_Extended_Timing_Init(FMC_NORSRAM_EXTENDED_TypeDef *Device, FMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode); -HAL_StatusTypeDef FMC_NORSRAM_DeInit(FMC_NORSRAM_TypeDef *Device, FMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank); -/** - * @} - */ - -/** @defgroup FMC_LL_NORSRAM_Private_Functions_Group2 NOR SRAM Control functions - * @{ - */ -HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Enable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank); -HAL_StatusTypeDef FMC_NORSRAM_WriteOperation_Disable(FMC_NORSRAM_TypeDef *Device, uint32_t Bank); -/** - * @} - */ -/** - * @} - */ - -/** @defgroup FMC_LL_NAND NAND - * @{ - */ -/** @defgroup FMC_LL_NAND_Private_Functions_Group1 NAND Initialization/de-initialization functions - * @{ - */ -HAL_StatusTypeDef FMC_NAND_Init(FMC_NAND_TypeDef *Device, FMC_NAND_InitTypeDef *Init); -HAL_StatusTypeDef FMC_NAND_CommonSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank); -HAL_StatusTypeDef FMC_NAND_AttributeSpace_Timing_Init(FMC_NAND_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank); -HAL_StatusTypeDef FMC_NAND_DeInit(FMC_NAND_TypeDef *Device, uint32_t Bank); -/** - * @} - */ - -/** @defgroup FMC_LL_NAND_Private_Functions_Group2 NAND Control functions - * @{ - */ -HAL_StatusTypeDef FMC_NAND_ECC_Enable(FMC_NAND_TypeDef *Device, uint32_t Bank); -HAL_StatusTypeDef FMC_NAND_ECC_Disable(FMC_NAND_TypeDef *Device, uint32_t Bank); -HAL_StatusTypeDef FMC_NAND_GetECC(FMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout); - -/** - * @} - */ -/** - * @} - */ -#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) -/** @defgroup FMC_LL_PCCARD PCCARD - * @{ - */ -/** @defgroup FMC_LL_PCCARD_Private_Functions_Group1 PCCARD Initialization/de-initialization functions - * @{ - */ -HAL_StatusTypeDef FMC_PCCARD_Init(FMC_PCCARD_TypeDef *Device, FMC_PCCARD_InitTypeDef *Init); -HAL_StatusTypeDef FMC_PCCARD_CommonSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing); -HAL_StatusTypeDef FMC_PCCARD_AttributeSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing); -HAL_StatusTypeDef FMC_PCCARD_IOSpace_Timing_Init(FMC_PCCARD_TypeDef *Device, FMC_NAND_PCC_TimingTypeDef *Timing); -HAL_StatusTypeDef FMC_PCCARD_DeInit(FMC_PCCARD_TypeDef *Device); -/** - * @} - */ -/** - * @} - */ -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */ - -/** @defgroup FMC_LL_SDRAM SDRAM - * @{ - */ -/** @defgroup FMC_LL_SDRAM_Private_Functions_Group1 SDRAM Initialization/de-initialization functions - * @{ - */ -HAL_StatusTypeDef FMC_SDRAM_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_InitTypeDef *Init); -HAL_StatusTypeDef FMC_SDRAM_Timing_Init(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_TimingTypeDef *Timing, uint32_t Bank); -HAL_StatusTypeDef FMC_SDRAM_DeInit(FMC_SDRAM_TypeDef *Device, uint32_t Bank); -/** - * @} - */ - -/** @defgroup FMC_LL_SDRAM_Private_Functions_Group2 SDRAM Control functions - * @{ - */ -HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Enable(FMC_SDRAM_TypeDef *Device, uint32_t Bank); -HAL_StatusTypeDef FMC_SDRAM_WriteProtection_Disable(FMC_SDRAM_TypeDef *Device, uint32_t Bank); -HAL_StatusTypeDef FMC_SDRAM_SendCommand(FMC_SDRAM_TypeDef *Device, FMC_SDRAM_CommandTypeDef *Command, uint32_t Timeout); -HAL_StatusTypeDef FMC_SDRAM_ProgramRefreshRate(FMC_SDRAM_TypeDef *Device, uint32_t RefreshRate); -HAL_StatusTypeDef FMC_SDRAM_SetAutoRefreshNumber(FMC_SDRAM_TypeDef *Device, uint32_t AutoRefreshNumber); -uint32_t FMC_SDRAM_GetModeStatus(FMC_SDRAM_TypeDef *Device, uint32_t Bank); -/** - * @} - */ -/** - * @} - */ - -/** - * @} - */ - -#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */ -/** - * @} - */ - -/** - * @} - */ -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_FMC_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h deleted file mode 100644 index 5845ab3..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_fsmc.h +++ /dev/null @@ -1,978 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_fsmc.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of FSMC HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_FSMC_H -#define __STM32F4xx_LL_FSMC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL_Driver - * @{ - */ - -/** @addtogroup FSMC_LL - * @{ - */ - -#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) -/* Private types -------------------------------------------------------------*/ -/** @defgroup FSMC_LL_Private_Types FSMC Private Types - * @{ - */ - -/** - * @brief FSMC NORSRAM Configuration Structure definition - */ -typedef struct -{ - uint32_t NSBank; /*!< Specifies the NORSRAM memory device that will be used. - This parameter can be a value of @ref FSMC_NORSRAM_Bank */ - - uint32_t DataAddressMux; /*!< Specifies whether the address and data values are - multiplexed on the data bus or not. - This parameter can be a value of @ref FSMC_Data_Address_Bus_Multiplexing */ - - uint32_t MemoryType; /*!< Specifies the type of external memory attached to - the corresponding memory device. - This parameter can be a value of @ref FSMC_Memory_Type */ - - uint32_t MemoryDataWidth; /*!< Specifies the external memory device width. - This parameter can be a value of @ref FSMC_NORSRAM_Data_Width */ - - uint32_t BurstAccessMode; /*!< Enables or disables the burst access mode for Flash memory, - valid only with synchronous burst Flash memories. - This parameter can be a value of @ref FSMC_Burst_Access_Mode */ - - uint32_t WaitSignalPolarity; /*!< Specifies the wait signal polarity, valid only when accessing - the Flash memory in burst mode. - This parameter can be a value of @ref FSMC_Wait_Signal_Polarity */ - - uint32_t WrapMode; /*!< Enables or disables the Wrapped burst access mode for Flash - memory, valid only when accessing Flash memories in burst mode. - This parameter can be a value of @ref FSMC_Wrap_Mode */ - - uint32_t WaitSignalActive; /*!< Specifies if the wait signal is asserted by the memory one - clock cycle before the wait state or during the wait state, - valid only when accessing memories in burst mode. - This parameter can be a value of @ref FSMC_Wait_Timing */ - - uint32_t WriteOperation; /*!< Enables or disables the write operation in the selected device by the FSMC. - This parameter can be a value of @ref FSMC_Write_Operation */ - - uint32_t WaitSignal; /*!< Enables or disables the wait state insertion via wait - signal, valid for Flash memory access in burst mode. - This parameter can be a value of @ref FSMC_Wait_Signal */ - - uint32_t ExtendedMode; /*!< Enables or disables the extended mode. - This parameter can be a value of @ref FSMC_Extended_Mode */ - - uint32_t AsynchronousWait; /*!< Enables or disables wait signal during asynchronous transfers, - valid only with asynchronous Flash memories. - This parameter can be a value of @ref FSMC_AsynchronousWait */ - - uint32_t WriteBurst; /*!< Enables or disables the write burst operation. - This parameter can be a value of @ref FSMC_Write_Burst */ - -}FSMC_NORSRAM_InitTypeDef; - -/** - * @brief FSMC NORSRAM Timing parameters structure definition - */ -typedef struct -{ - uint32_t AddressSetupTime; /*!< Defines the number of HCLK cycles to configure - the duration of the address setup time. - This parameter can be a value between Min_Data = 0 and Max_Data = 15. - @note This parameter is not used with synchronous NOR Flash memories. */ - - uint32_t AddressHoldTime; /*!< Defines the number of HCLK cycles to configure - the duration of the address hold time. - This parameter can be a value between Min_Data = 1 and Max_Data = 15. - @note This parameter is not used with synchronous NOR Flash memories. */ - - uint32_t DataSetupTime; /*!< Defines the number of HCLK cycles to configure - the duration of the data setup time. - This parameter can be a value between Min_Data = 1 and Max_Data = 255. - @note This parameter is used for SRAMs, ROMs and asynchronous multiplexed - NOR Flash memories. */ - - uint32_t BusTurnAroundDuration; /*!< Defines the number of HCLK cycles to configure - the duration of the bus turnaround. - This parameter can be a value between Min_Data = 0 and Max_Data = 15. - @note This parameter is only used for multiplexed NOR Flash memories. */ - - uint32_t CLKDivision; /*!< Defines the period of CLK clock output signal, expressed in number of - HCLK cycles. This parameter can be a value between Min_Data = 2 and Max_Data = 16. - @note This parameter is not used for asynchronous NOR Flash, SRAM or ROM - accesses. */ - - uint32_t DataLatency; /*!< Defines the number of memory clock cycles to issue - to the memory before getting the first data. - The parameter value depends on the memory type as shown below: - - It must be set to 0 in case of a CRAM - - It is don't care in asynchronous NOR, SRAM or ROM accesses - - It may assume a value between Min_Data = 2 and Max_Data = 17 in NOR Flash memories - with synchronous burst mode enable */ - - uint32_t AccessMode; /*!< Specifies the asynchronous access mode. - This parameter can be a value of @ref FSMC_Access_Mode */ - -}FSMC_NORSRAM_TimingTypeDef; - -/** - * @brief FSMC NAND Configuration Structure definition - */ -typedef struct -{ - uint32_t NandBank; /*!< Specifies the NAND memory device that will be used. - This parameter can be a value of @ref FSMC_NAND_Bank */ - - uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the NAND Memory device. - This parameter can be any value of @ref FSMC_Wait_feature */ - - uint32_t MemoryDataWidth; /*!< Specifies the external memory device width. - This parameter can be any value of @ref FSMC_NAND_Data_Width */ - - uint32_t EccComputation; /*!< Enables or disables the ECC computation. - This parameter can be any value of @ref FSMC_ECC */ - - uint32_t ECCPageSize; /*!< Defines the page size for the extended ECC. - This parameter can be any value of @ref FSMC_ECC_Page_Size */ - - uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the - delay between CLE low and RE low. - This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ - - uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the - delay between ALE low and RE low. - This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ - -}FSMC_NAND_InitTypeDef; - -/** - * @brief FSMC NAND/PCCARD Timing parameters structure definition - */ -typedef struct -{ - uint32_t SetupTime; /*!< Defines the number of HCLK cycles to setup address before - the command assertion for NAND-Flash read or write access - to common/Attribute or I/O memory space (depending on - the memory space timing to be configured). - This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ - - uint32_t WaitSetupTime; /*!< Defines the minimum number of HCLK cycles to assert the - command for NAND-Flash read or write access to - common/Attribute or I/O memory space (depending on the - memory space timing to be configured). - This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ - - uint32_t HoldSetupTime; /*!< Defines the number of HCLK clock cycles to hold address - (and data for write access) after the command de-assertion - for NAND-Flash read or write access to common/Attribute - or I/O memory space (depending on the memory space timing - to be configured). - This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ - - uint32_t HiZSetupTime; /*!< Defines the number of HCLK clock cycles during which the - data bus is kept in HiZ after the start of a NAND-Flash - write access to common/Attribute or I/O memory space (depending - on the memory space timing to be configured). - This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ - -}FSMC_NAND_PCC_TimingTypeDef; - -/** - * @brief FSMC NAND Configuration Structure definition - */ -typedef struct -{ - uint32_t Waitfeature; /*!< Enables or disables the Wait feature for the PCCARD Memory device. - This parameter can be any value of @ref FSMC_Wait_feature */ - - uint32_t TCLRSetupTime; /*!< Defines the number of HCLK cycles to configure the - delay between CLE low and RE low. - This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ - - uint32_t TARSetupTime; /*!< Defines the number of HCLK cycles to configure the - delay between ALE low and RE low. - This parameter can be a number between Min_Data = 0 and Max_Data = 255 */ - -}FSMC_PCCARD_InitTypeDef; -/** - * @} - */ - -/* Private constants ---------------------------------------------------------*/ -/** @defgroup FSMC_LL_Private_Constants FSMC Private Constants - * @{ - */ - -/** @defgroup FSMC_LL_NOR_SRAM_Controller FSMC NOR/SRAM Controller - * @{ - */ -/** @defgroup FSMC_NORSRAM_Bank FSMC NOR/SRAM Bank - * @{ - */ -#define FSMC_NORSRAM_BANK1 ((uint32_t)0x00000000) -#define FSMC_NORSRAM_BANK2 ((uint32_t)0x00000002) -#define FSMC_NORSRAM_BANK3 ((uint32_t)0x00000004) -#define FSMC_NORSRAM_BANK4 ((uint32_t)0x00000006) -/** - * @} - */ - -/** @defgroup FSMC_Data_Address_Bus_Multiplexing FSMC Data Address Bus Multiplexing - * @{ - */ -#define FSMC_DATA_ADDRESS_MUX_DISABLE ((uint32_t)0x00000000) -#define FSMC_DATA_ADDRESS_MUX_ENABLE ((uint32_t)0x00000002) -/** - * @} - */ - -/** @defgroup FSMC_Memory_Type FSMC Memory Type - * @{ - */ -#define FSMC_MEMORY_TYPE_SRAM ((uint32_t)0x00000000) -#define FSMC_MEMORY_TYPE_PSRAM ((uint32_t)0x00000004) -#define FSMC_MEMORY_TYPE_NOR ((uint32_t)0x00000008) -/** - * @} - */ - -/** @defgroup FSMC_NORSRAM_Data_Width FSMC NOR/SRAM Data Width - * @{ - */ -#define FSMC_NORSRAM_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000) -#define FSMC_NORSRAM_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010) -#define FSMC_NORSRAM_MEM_BUS_WIDTH_32 ((uint32_t)0x00000020) -/** - * @} - */ - -/** @defgroup FSMC_NORSRAM_Flash_Access FSMC NOR/SRAM Flash Access - * @{ - */ -#define FSMC_NORSRAM_FLASH_ACCESS_ENABLE ((uint32_t)0x00000040) -#define FSMC_NORSRAM_FLASH_ACCESS_DISABLE ((uint32_t)0x00000000) -/** - * @} - */ - -/** @defgroup FSMC_Burst_Access_Mode FSMC Burst Access Mode - * @{ - */ -#define FSMC_BURST_ACCESS_MODE_DISABLE ((uint32_t)0x00000000) -#define FSMC_BURST_ACCESS_MODE_ENABLE ((uint32_t)0x00000100) -/** - * @} - */ - -/** @defgroup FSMC_Wait_Signal_Polarity FSMC Wait Signal Polarity - * @{ - */ -#define FSMC_WAIT_SIGNAL_POLARITY_LOW ((uint32_t)0x00000000) -#define FSMC_WAIT_SIGNAL_POLARITY_HIGH ((uint32_t)0x00000200) -/** - * @} - */ - -/** @defgroup FSMC_Wrap_Mode FSMC Wrap Mode - * @{ - */ -#define FSMC_WRAP_MODE_DISABLE ((uint32_t)0x00000000) -#define FSMC_WRAP_MODE_ENABLE ((uint32_t)0x00000400) -/** - * @} - */ - -/** @defgroup FSMC_Wait_Timing FSMC Wait Timing - * @{ - */ -#define FSMC_WAIT_TIMING_BEFORE_WS ((uint32_t)0x00000000) -#define FSMC_WAIT_TIMING_DURING_WS ((uint32_t)0x00000800) -/** - * @} - */ - -/** @defgroup FSMC_Write_Operation FSMC Write Operation - * @{ - */ -#define FSMC_WRITE_OPERATION_DISABLE ((uint32_t)0x00000000) -#define FSMC_WRITE_OPERATION_ENABLE ((uint32_t)0x00001000) -/** - * @} - */ - -/** @defgroup FSMC_Wait_Signal FSMC Wait Signal - * @{ - */ -#define FSMC_WAIT_SIGNAL_DISABLE ((uint32_t)0x00000000) -#define FSMC_WAIT_SIGNAL_ENABLE ((uint32_t)0x00002000) -/** - * @} - */ - -/** @defgroup FSMC_Extended_Mode FSMC Extended Mode - * @{ - */ -#define FSMC_EXTENDED_MODE_DISABLE ((uint32_t)0x00000000) -#define FSMC_EXTENDED_MODE_ENABLE ((uint32_t)0x00004000) -/** - * @} - */ - -/** @defgroup FSMC_AsynchronousWait FSMC Asynchronous Wait - * @{ - */ -#define FSMC_ASYNCHRONOUS_WAIT_DISABLE ((uint32_t)0x00000000) -#define FSMC_ASYNCHRONOUS_WAIT_ENABLE ((uint32_t)0x00008000) -/** - * @} - */ - -/** @defgroup FSMC_Write_Burst FSMC Write Burst - * @{ - */ -#define FSMC_WRITE_BURST_DISABLE ((uint32_t)0x00000000) -#define FSMC_WRITE_BURST_ENABLE ((uint32_t)0x00080000) -/** - * @} - */ - -/** @defgroup FSMC_Continous_Clock FSMC Continous Clock - * @{ - */ -#define FSMC_CONTINUOUS_CLOCK_SYNC_ONLY ((uint32_t)0x00000000) -#define FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC ((uint32_t)0x00100000) -/** - * @} - */ - -/** @defgroup FSMC_Access_Mode FSMC Access Mode - * @{ - */ -#define FSMC_ACCESS_MODE_A ((uint32_t)0x00000000) -#define FSMC_ACCESS_MODE_B ((uint32_t)0x10000000) -#define FSMC_ACCESS_MODE_C ((uint32_t)0x20000000) -#define FSMC_ACCESS_MODE_D ((uint32_t)0x30000000) -/** - * @} - */ -/** - * @} - */ - -/** @defgroup FSMC_LL_NAND_Controller FSMC NAND and PCCARD Controller - * @{ - */ -/** @defgroup FSMC_NAND_Bank FSMC NAND Bank - * @{ - */ -#define FSMC_NAND_BANK2 ((uint32_t)0x00000010) -#define FSMC_NAND_BANK3 ((uint32_t)0x00000100) -/** - * @} - */ - -/** @defgroup FSMC_Wait_feature FSMC Wait feature - * @{ - */ -#define FSMC_NAND_PCC_WAIT_FEATURE_DISABLE ((uint32_t)0x00000000) -#define FSMC_NAND_PCC_WAIT_FEATURE_ENABLE ((uint32_t)0x00000002) -/** - * @} - */ - -/** @defgroup FSMC_PCR_Memory_Type FSMC PCR Memory Type - * @{ - */ -#define FSMC_PCR_MEMORY_TYPE_PCCARD ((uint32_t)0x00000000) -#define FSMC_PCR_MEMORY_TYPE_NAND ((uint32_t)0x00000008) -/** - * @} - */ - -/** @defgroup FSMC_NAND_Data_Width FSMC NAND Data Width - * @{ - */ -#define FSMC_NAND_PCC_MEM_BUS_WIDTH_8 ((uint32_t)0x00000000) -#define FSMC_NAND_PCC_MEM_BUS_WIDTH_16 ((uint32_t)0x00000010) -/** - * @} - */ - -/** @defgroup FSMC_ECC FSMC ECC - * @{ - */ -#define FSMC_NAND_ECC_DISABLE ((uint32_t)0x00000000) -#define FSMC_NAND_ECC_ENABLE ((uint32_t)0x00000040) -/** - * @} - */ - -/** @defgroup FSMC_ECC_Page_Size FSMC ECC Page Size - * @{ - */ -#define FSMC_NAND_ECC_PAGE_SIZE_256BYTE ((uint32_t)0x00000000) -#define FSMC_NAND_ECC_PAGE_SIZE_512BYTE ((uint32_t)0x00020000) -#define FSMC_NAND_ECC_PAGE_SIZE_1024BYTE ((uint32_t)0x00040000) -#define FSMC_NAND_ECC_PAGE_SIZE_2048BYTE ((uint32_t)0x00060000) -#define FSMC_NAND_ECC_PAGE_SIZE_4096BYTE ((uint32_t)0x00080000) -#define FSMC_NAND_ECC_PAGE_SIZE_8192BYTE ((uint32_t)0x000A0000) -/** - * @} - */ -/** - * @} - */ - -/** @defgroup FSMC_LL_Interrupt_definition FSMC Interrupt definition - * @{ - */ -#define FSMC_IT_RISING_EDGE ((uint32_t)0x00000008) -#define FSMC_IT_LEVEL ((uint32_t)0x00000010) -#define FSMC_IT_FALLING_EDGE ((uint32_t)0x00000020) -#define FSMC_IT_REFRESH_ERROR ((uint32_t)0x00004000) -/** - * @} - */ - -/** @defgroup FSMC_LL_Flag_definition FSMC Flag definition - * @{ - */ -#define FSMC_FLAG_RISING_EDGE ((uint32_t)0x00000001) -#define FSMC_FLAG_LEVEL ((uint32_t)0x00000002) -#define FSMC_FLAG_FALLING_EDGE ((uint32_t)0x00000004) -#define FSMC_FLAG_FEMPT ((uint32_t)0x00000040) -/** - * @} - */ - -/** @defgroup FSMC_LL_Alias_definition FSMC Alias definition - * @{ - */ -#define FSMC_NORSRAM_TypeDef FSMC_Bank1_TypeDef -#define FSMC_NORSRAM_EXTENDED_TypeDef FSMC_Bank1E_TypeDef -#define FSMC_NAND_TypeDef FSMC_Bank2_3_TypeDef -#define FSMC_PCCARD_TypeDef FSMC_Bank4_TypeDef - -#define FSMC_NORSRAM_DEVICE FSMC_Bank1 -#define FSMC_NORSRAM_EXTENDED_DEVICE FSMC_Bank1E -#define FSMC_NAND_DEVICE FSMC_Bank2_3 -#define FSMC_PCCARD_DEVICE FSMC_Bank4 - -#define FMC_NORSRAM_TypeDef FSMC_NORSRAM_TypeDef -#define FMC_NORSRAM_EXTENDED_TypeDef FSMC_NORSRAM_EXTENDED_TypeDef -#define FMC_NORSRAM_InitTypeDef FSMC_NORSRAM_InitTypeDef -#define FMC_NORSRAM_TimingTypeDef FSMC_NORSRAM_TimingTypeDef - -#define FMC_NORSRAM_Init FSMC_NORSRAM_Init -#define FMC_NORSRAM_Timing_Init FSMC_NORSRAM_Timing_Init -#define FMC_NORSRAM_Extended_Timing_Init FSMC_NORSRAM_Extended_Timing_Init -#define FMC_NORSRAM_DeInit FSMC_NORSRAM_DeInit -#define FMC_NORSRAM_WriteOperation_Enable FSMC_NORSRAM_WriteOperation_Enable -#define FMC_NORSRAM_WriteOperation_Disable FSMC_NORSRAM_WriteOperation_Disable - -#define __FMC_NORSRAM_ENABLE __FSMC_NORSRAM_ENABLE -#define __FMC_NORSRAM_DISABLE __FSMC_NORSRAM_DISABLE - -#define FMC_NAND_InitTypeDef FSMC_NAND_InitTypeDef -#define FMC_PCCARD_InitTypeDef FSMC_PCCARD_InitTypeDef -#define FMC_NAND_PCC_TimingTypeDef FSMC_NAND_PCC_TimingTypeDef - -#define FMC_NAND_Init FSMC_NAND_Init -#define FMC_NAND_CommonSpace_Timing_Init FSMC_NAND_CommonSpace_Timing_Init -#define FMC_NAND_AttributeSpace_Timing_Init FSMC_NAND_AttributeSpace_Timing_Init -#define FMC_NAND_DeInit FSMC_NAND_DeInit -#define FMC_NAND_ECC_Enable FSMC_NAND_ECC_Enable -#define FMC_NAND_ECC_Disable FSMC_NAND_ECC_Disable -#define FMC_NAND_GetECC FSMC_NAND_GetECC -#define FMC_PCCARD_Init FSMC_PCCARD_Init -#define FMC_PCCARD_CommonSpace_Timing_Init FSMC_PCCARD_CommonSpace_Timing_Init -#define FMC_PCCARD_AttributeSpace_Timing_Init FSMC_PCCARD_AttributeSpace_Timing_Init -#define FMC_PCCARD_IOSpace_Timing_Init FSMC_PCCARD_IOSpace_Timing_Init -#define FMC_PCCARD_DeInit FSMC_PCCARD_DeInit - -#define __FMC_NAND_ENABLE __FSMC_NAND_ENABLE -#define __FMC_NAND_DISABLE __FSMC_NAND_DISABLE -#define __FMC_PCCARD_ENABLE __FSMC_PCCARD_ENABLE -#define __FMC_PCCARD_DISABLE __FSMC_PCCARD_DISABLE -#define __FMC_NAND_ENABLE_IT __FSMC_NAND_ENABLE_IT -#define __FMC_NAND_DISABLE_IT __FSMC_NAND_DISABLE_IT -#define __FMC_NAND_GET_FLAG __FSMC_NAND_GET_FLAG -#define __FMC_NAND_CLEAR_FLAG __FSMC_NAND_CLEAR_FLAG -#define __FMC_PCCARD_ENABLE_IT __FSMC_PCCARD_ENABLE_IT -#define __FMC_PCCARD_DISABLE_IT __FSMC_PCCARD_DISABLE_IT -#define __FMC_PCCARD_GET_FLAG __FSMC_PCCARD_GET_FLAG -#define __FMC_PCCARD_CLEAR_FLAG __FSMC_PCCARD_CLEAR_FLAG - -#define FMC_NORSRAM_TypeDef FSMC_NORSRAM_TypeDef -#define FMC_NORSRAM_EXTENDED_TypeDef FSMC_NORSRAM_EXTENDED_TypeDef -#define FMC_NAND_TypeDef FSMC_NAND_TypeDef -#define FMC_PCCARD_TypeDef FSMC_PCCARD_TypeDef - -#define FMC_NORSRAM_DEVICE FSMC_NORSRAM_DEVICE -#define FMC_NORSRAM_EXTENDED_DEVICE FSMC_NORSRAM_EXTENDED_DEVICE -#define FMC_NAND_DEVICE FSMC_NAND_DEVICE -#define FMC_PCCARD_DEVICE FSMC_PCCARD_DEVICE - -#define FMC_NAND_BANK2 FSMC_NAND_BANK2 - -#define FMC_NORSRAM_BANK1 FSMC_NORSRAM_BANK1 -#define FMC_NORSRAM_BANK2 FSMC_NORSRAM_BANK2 -#define FMC_NORSRAM_BANK3 FSMC_NORSRAM_BANK3 - -#define FMC_IT_RISING_EDGE FSMC_IT_RISING_EDGE -#define FMC_IT_LEVEL FSMC_IT_LEVEL -#define FMC_IT_FALLING_EDGE FSMC_IT_FALLING_EDGE -#define FMC_IT_REFRESH_ERROR FSMC_IT_REFRESH_ERROR - -#define FMC_FLAG_RISING_EDGE FSMC_FLAG_RISING_EDGE -#define FMC_FLAG_LEVEL FSMC_FLAG_LEVEL -#define FMC_FLAG_FALLING_EDGE FSMC_FLAG_FALLING_EDGE -#define FMC_FLAG_FEMPT FSMC_FLAG_FEMPT -/** - * @} - */ - -/** - * @} - */ - -/* Private macro -------------------------------------------------------------*/ -/** @defgroup FSMC_LL_Private_Macros FSMC Private Macros - * @{ - */ - -/** @defgroup FSMC_LL_NOR_Macros FSMC NOR/SRAM Exported Macros - * @brief macros to handle NOR device enable/disable and read/write operations - * @{ - */ -/** - * @brief Enable the NORSRAM device access. - * @param __INSTANCE__: FSMC_NORSRAM Instance - * @param __BANK__: FSMC_NORSRAM Bank - * @retval none - */ -#define __FSMC_NORSRAM_ENABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] |= FSMC_BCR1_MBKEN) - -/** - * @brief Disable the NORSRAM device access. - * @param __INSTANCE__: FSMC_NORSRAM Instance - * @param __BANK__: FSMC_NORSRAM Bank - * @retval none - */ -#define __FSMC_NORSRAM_DISABLE(__INSTANCE__, __BANK__) ((__INSTANCE__)->BTCR[(__BANK__)] &= ~FSMC_BCR1_MBKEN) -/** - * @} - */ - -/** @defgroup FSMC_LL_NAND_Macros FSMC NAND Macros - * @brief macros to handle NAND device enable/disable - * @{ - */ -/** - * @brief Enable the NAND device access. - * @param __INSTANCE__: FSMC_NAND Instance - * @param __BANK__: FSMC_NAND Bank - * @retval none - */ -#define __FSMC_NAND_ENABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 |= FSMC_PCR2_PBKEN): \ - ((__INSTANCE__)->PCR3 |= FSMC_PCR3_PBKEN)) - -/** - * @brief Disable the NAND device access. - * @param __INSTANCE__: FSMC_NAND Instance - * @param __BANK__: FSMC_NAND Bank - * @retval none - */ -#define __FSMC_NAND_DISABLE(__INSTANCE__, __BANK__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->PCR2 &= ~FSMC_PCR2_PBKEN): \ - ((__INSTANCE__)->PCR3 &= ~FSMC_PCR3_PBKEN)) -/** - * @} - */ - -/** @defgroup FSMC_LL_PCCARD_Macros FSMC PCCARD Macros - * @brief macros to handle SRAM read/write operations - * @{ - */ -/** - * @brief Enable the PCCARD device access. - * @param __INSTANCE__: FSMC_PCCARD Instance - * @retval none - */ -#define __FSMC_PCCARD_ENABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 |= FSMC_PCR4_PBKEN) - -/** - * @brief Disable the PCCARD device access. - * @param __INSTANCE__: FSMC_PCCARD Instance - * @retval none - */ -#define __FSMC_PCCARD_DISABLE(__INSTANCE__) ((__INSTANCE__)->PCR4 &= ~FSMC_PCR4_PBKEN) -/** - * @} - */ - -/** @defgroup FSMC_LL_Flag_Interrupt_Macros FSMC Flag&Interrupt Macros - * @brief macros to handle FSMC flags and interrupts - * @{ - */ -/** - * @brief Enable the NAND device interrupt. - * @param __INSTANCE__: FSMC_NAND Instance - * @param __BANK__: FSMC_NAND Bank - * @param __INTERRUPT__: FSMC_NAND interrupt - * This parameter can be any combination of the following values: - * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge. - * @arg FSMC_IT_LEVEL: Interrupt level. - * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge. - * @retval None - */ -#define __FSMC_NAND_ENABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 |= (__INTERRUPT__)): \ - ((__INSTANCE__)->SR3 |= (__INTERRUPT__))) - -/** - * @brief Disable the NAND device interrupt. - * @param __INSTANCE__: FSMC_NAND Instance - * @param __BANK__: FSMC_NAND Bank - * @param __INTERRUPT__: FSMC_NAND interrupt - * This parameter can be any combination of the following values: - * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge. - * @arg FSMC_IT_LEVEL: Interrupt level. - * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge. - * @retval None - */ -#define __FSMC_NAND_DISABLE_IT(__INSTANCE__, __BANK__, __INTERRUPT__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__INTERRUPT__)): \ - ((__INSTANCE__)->SR3 &= ~(__INTERRUPT__))) - -/** - * @brief Get flag status of the NAND device. - * @param __INSTANCE__: FSMC_NAND Instance - * @param __BANK__ : FSMC_NAND Bank - * @param __FLAG__ : FSMC_NAND flag - * This parameter can be any combination of the following values: - * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag. - * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag. - * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. - * @arg FSMC_FLAG_FEMPT: FIFO empty flag. - * @retval The state of FLAG (SET or RESET). - */ -#define __FSMC_NAND_GET_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FSMC_NAND_BANK2)? (((__INSTANCE__)->SR2 &(__FLAG__)) == (__FLAG__)): \ - (((__INSTANCE__)->SR3 &(__FLAG__)) == (__FLAG__))) -/** - * @brief Clear flag status of the NAND device. - * @param __INSTANCE__: FSMC_NAND Instance - * @param __BANK__: FSMC_NAND Bank - * @param __FLAG__: FSMC_NAND flag - * This parameter can be any combination of the following values: - * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag. - * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag. - * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. - * @arg FSMC_FLAG_FEMPT: FIFO empty flag. - * @retval None - */ -#define __FSMC_NAND_CLEAR_FLAG(__INSTANCE__, __BANK__, __FLAG__) (((__BANK__) == FSMC_NAND_BANK2)? ((__INSTANCE__)->SR2 &= ~(__FLAG__)): \ - ((__INSTANCE__)->SR3 &= ~(__FLAG__))) -/** - * @brief Enable the PCCARD device interrupt. - * @param __INSTANCE__: FSMC_PCCARD Instance - * @param __INTERRUPT__: FSMC_PCCARD interrupt - * This parameter can be any combination of the following values: - * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge. - * @arg FSMC_IT_LEVEL: Interrupt level. - * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge. - * @retval None - */ -#define __FSMC_PCCARD_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 |= (__INTERRUPT__)) - -/** - * @brief Disable the PCCARD device interrupt. - * @param __INSTANCE__: FSMC_PCCARD Instance - * @param __INTERRUPT__: FSMC_PCCARD interrupt - * This parameter can be any combination of the following values: - * @arg FSMC_IT_RISING_EDGE: Interrupt rising edge. - * @arg FSMC_IT_LEVEL: Interrupt level. - * @arg FSMC_IT_FALLING_EDGE: Interrupt falling edge. - * @retval None - */ -#define __FSMC_PCCARD_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->SR4 &= ~(__INTERRUPT__)) - -/** - * @brief Get flag status of the PCCARD device. - * @param __INSTANCE__: FSMC_PCCARD Instance - * @param __FLAG__: FSMC_PCCARD flag - * This parameter can be any combination of the following values: - * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag. - * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag. - * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. - * @arg FSMC_FLAG_FEMPT: FIFO empty flag. - * @retval The state of FLAG (SET or RESET). - */ -#define __FSMC_PCCARD_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->SR4 &(__FLAG__)) == (__FLAG__)) - -/** - * @brief Clear flag status of the PCCARD device. - * @param __INSTANCE__: FSMC_PCCARD Instance - * @param __FLAG__: FSMC_PCCARD flag - * This parameter can be any combination of the following values: - * @arg FSMC_FLAG_RISING_EDGE: Interrupt rising edge flag. - * @arg FSMC_FLAG_LEVEL: Interrupt level edge flag. - * @arg FSMC_FLAG_FALLING_EDGE: Interrupt falling edge flag. - * @arg FSMC_FLAG_FEMPT: FIFO empty flag. - * @retval None - */ -#define __FSMC_PCCARD_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->SR4 &= ~(__FLAG__)) -/** - * @} - */ - -/** @defgroup FSMC_LL_Assert_Macros FSMC Assert Macros - * @{ - */ -#define IS_FSMC_NORSRAM_BANK(__BANK__) (((__BANK__) == FSMC_NORSRAM_BANK1) || \ - ((__BANK__) == FSMC_NORSRAM_BANK2) || \ - ((__BANK__) == FSMC_NORSRAM_BANK3) || \ - ((__BANK__) == FSMC_NORSRAM_BANK4)) - -#define IS_FSMC_MUX(__MUX__) (((__MUX__) == FSMC_DATA_ADDRESS_MUX_DISABLE) || \ - ((__MUX__) == FSMC_DATA_ADDRESS_MUX_ENABLE)) - -#define IS_FSMC_MEMORY(__MEMORY__) (((__MEMORY__) == FSMC_MEMORY_TYPE_SRAM) || \ - ((__MEMORY__) == FSMC_MEMORY_TYPE_PSRAM)|| \ - ((__MEMORY__) == FSMC_MEMORY_TYPE_NOR)) - -#define IS_FSMC_NORSRAM_MEMORY_WIDTH(__WIDTH__) (((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_8) || \ - ((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_16) || \ - ((__WIDTH__) == FSMC_NORSRAM_MEM_BUS_WIDTH_32)) - -#define IS_FSMC_ACCESS_MODE(__MODE__) (((__MODE__) == FSMC_ACCESS_MODE_A) || \ - ((__MODE__) == FSMC_ACCESS_MODE_B) || \ - ((__MODE__) == FSMC_ACCESS_MODE_C) || \ - ((__MODE__) == FSMC_ACCESS_MODE_D)) - -#define IS_FSMC_NAND_BANK(BANK) (((BANK) == FSMC_NAND_BANK2) || \ - ((BANK) == FSMC_NAND_BANK3)) - -#define IS_FSMC_WAIT_FEATURE(FEATURE) (((FEATURE) == FSMC_NAND_PCC_WAIT_FEATURE_DISABLE) || \ - ((FEATURE) == FSMC_NAND_PCC_WAIT_FEATURE_ENABLE)) - -#define IS_FSMC_NAND_MEMORY_WIDTH(WIDTH) (((WIDTH) == FSMC_NAND_PCC_MEM_BUS_WIDTH_8) || \ - ((WIDTH) == FSMC_NAND_PCC_MEM_BUS_WIDTH_16)) - -#define IS_FSMC_ECC_STATE(STATE) (((STATE) == FSMC_NAND_ECC_DISABLE) || \ - ((STATE) == FSMC_NAND_ECC_ENABLE)) - -#define IS_FSMC_ECCPAGE_SIZE(SIZE) (((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_256BYTE) || \ - ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_512BYTE) || \ - ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_1024BYTE) || \ - ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_2048BYTE) || \ - ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_4096BYTE) || \ - ((SIZE) == FSMC_NAND_ECC_PAGE_SIZE_8192BYTE)) - -#define IS_FSMC_TCLR_TIME(TIME) ((TIME) <= 255) - -#define IS_FSMC_TAR_TIME(TIME) ((TIME) <= 255) - -#define IS_FSMC_SETUP_TIME(TIME) ((TIME) <= 255) - -#define IS_FSMC_WAIT_TIME(TIME) ((TIME) <= 255) - -#define IS_FSMC_HOLD_TIME(TIME) ((TIME) <= 255) - -#define IS_FSMC_HIZ_TIME(TIME) ((TIME) <= 255) - -#define IS_FSMC_NORSRAM_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_DEVICE) - -#define IS_FSMC_NORSRAM_EXTENDED_DEVICE(__INSTANCE__) ((__INSTANCE__) == FSMC_NORSRAM_EXTENDED_DEVICE) - -#define IS_FSMC_NAND_DEVICE(INSTANCE) ((INSTANCE) == FSMC_NAND_DEVICE) - -#define IS_FSMC_PCCARD_DEVICE(INSTANCE) ((INSTANCE) == FSMC_PCCARD_DEVICE) - -#define IS_FSMC_BURSTMODE(__STATE__) (((__STATE__) == FSMC_BURST_ACCESS_MODE_DISABLE) || \ - ((__STATE__) == FSMC_BURST_ACCESS_MODE_ENABLE)) - -#define IS_FSMC_WAIT_POLARITY(__POLARITY__) (((__POLARITY__) == FSMC_WAIT_SIGNAL_POLARITY_LOW) || \ - ((__POLARITY__) == FSMC_WAIT_SIGNAL_POLARITY_HIGH)) - -#define IS_FSMC_WRAP_MODE(__MODE__) (((__MODE__) == FSMC_WRAP_MODE_DISABLE) || \ - ((__MODE__) == FSMC_WRAP_MODE_ENABLE)) - -#define IS_FSMC_WAIT_SIGNAL_ACTIVE(__ACTIVE__) (((__ACTIVE__) == FSMC_WAIT_TIMING_BEFORE_WS) || \ - ((__ACTIVE__) == FSMC_WAIT_TIMING_DURING_WS)) - -#define IS_FSMC_WRITE_OPERATION(__OPERATION__) (((__OPERATION__) == FSMC_WRITE_OPERATION_DISABLE) || \ - ((__OPERATION__) == FSMC_WRITE_OPERATION_ENABLE)) - -#define IS_FSMC_WAITE_SIGNAL(__SIGNAL__) (((__SIGNAL__) == FSMC_WAIT_SIGNAL_DISABLE) || \ - ((__SIGNAL__) == FSMC_WAIT_SIGNAL_ENABLE)) - -#define IS_FSMC_EXTENDED_MODE(__MODE__) (((__MODE__) == FSMC_EXTENDED_MODE_DISABLE) || \ - ((__MODE__) == FSMC_EXTENDED_MODE_ENABLE)) - -#define IS_FSMC_ASYNWAIT(__STATE__) (((__STATE__) == FSMC_ASYNCHRONOUS_WAIT_DISABLE) || \ - ((__STATE__) == FSMC_ASYNCHRONOUS_WAIT_ENABLE)) - -#define IS_FSMC_DATA_LATENCY(__LATENCY__) (((__LATENCY__) > 1) && ((__LATENCY__) <= 17)) - -#define IS_FSMC_WRITE_BURST(__BURST__) (((__BURST__) == FSMC_WRITE_BURST_DISABLE) || \ - ((__BURST__) == FSMC_WRITE_BURST_ENABLE)) - -#define IS_FSMC_ADDRESS_SETUP_TIME(__TIME__) ((__TIME__) <= 15) - -#define IS_FSMC_ADDRESS_HOLD_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 15)) - -#define IS_FSMC_DATASETUP_TIME(__TIME__) (((__TIME__) > 0) && ((__TIME__) <= 255)) - -#define IS_FSMC_TURNAROUND_TIME(__TIME__) ((__TIME__) <= 15) - -#define IS_FSMC_CONTINOUS_CLOCK(CCLOCK) (((CCLOCK) == FSMC_CONTINUOUS_CLOCK_SYNC_ONLY) || \ - ((CCLOCK) == FSMC_CONTINUOUS_CLOCK_SYNC_ASYNC)) - -#define IS_FSMC_CLK_DIV(DIV) (((DIV) > 1) && ((DIV) <= 16)) - -/** - * @} - */ -/** - * @} - */ - -/* Private functions ---------------------------------------------------------*/ -/** @defgroup FSMC_LL_Private_Functions FSMC LL Private Functions - * @{ - */ - -/** @defgroup FSMC_LL_NORSRAM NOR SRAM - * @{ - */ - -/** @defgroup FSMC_LL_NORSRAM_Private_Functions_Group1 NOR SRAM Initialization/de-initialization functions - * @{ - */ -HAL_StatusTypeDef FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef *Init); -HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank); -HAL_StatusTypeDef FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode); -HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank); -/** - * @} - */ - -/** @defgroup FSMC_LL_NORSRAM_Private_Functions_Group2 NOR SRAM Control functions - * @{ - */ -HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank); -HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank); -/** - * @} - */ -/** - * @} - */ - -/** @defgroup FSMC_LL_NAND NAND - * @{ - */ -/** @defgroup FSMC_LL_NAND_Private_Functions_Group1 NAND Initialization/de-initialization functions - * @{ - */ -HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDef *Init); -HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank); -HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank); -HAL_StatusTypeDef FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank); -/** - * @} - */ - -/** @defgroup FSMC_LL_NAND_Private_Functions_Group2 NAND Control functions - * @{ - */ -HAL_StatusTypeDef FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank); -HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank); -HAL_StatusTypeDef FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout); -/** - * @} - */ -/** - * @} - */ - -/** @defgroup FSMC_LL_PCCARD PCCARD - * @{ - */ -/** @defgroup FSMC_LL_PCCARD_Private_Functions_Group1 PCCARD Initialization/de-initialization functions - * @{ - */ -HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_InitTypeDef *Init); -HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing); -HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing); -HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing); -HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device); -/** - * @} - */ -/** - * @} - */ - -/** - * @} - */ -#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_FSMC_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h deleted file mode 100644 index 493cd93..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_sdmmc.h +++ /dev/null @@ -1,908 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_sdmmc.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of SDMMC HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_SDMMC_H -#define __STM32F4xx_LL_SDMMC_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_Driver - * @{ - */ - -/** @addtogroup SDMMC_LL - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ -/** @defgroup SDMMC_LL_Exported_Types SDMMC_LL Exported Types - * @{ - */ - -/** - * @brief SDMMC Configuration Structure definition - */ -typedef struct -{ - uint32_t ClockEdge; /*!< Specifies the clock transition on which the bit capture is made. - This parameter can be a value of @ref SDIO_Clock_Edge */ - - uint32_t ClockBypass; /*!< Specifies whether the SDIO Clock divider bypass is - enabled or disabled. - This parameter can be a value of @ref SDIO_Clock_Bypass */ - - uint32_t ClockPowerSave; /*!< Specifies whether SDIO Clock output is enabled or - disabled when the bus is idle. - This parameter can be a value of @ref SDIO_Clock_Power_Save */ - - uint32_t BusWide; /*!< Specifies the SDIO bus width. - This parameter can be a value of @ref SDIO_Bus_Wide */ - - uint32_t HardwareFlowControl; /*!< Specifies whether the SDIO hardware flow control is enabled or disabled. - This parameter can be a value of @ref SDIO_Hardware_Flow_Control */ - - uint32_t ClockDiv; /*!< Specifies the clock frequency of the SDIO controller. - This parameter can be a value between Min_Data = 0 and Max_Data = 255 */ - -}SDIO_InitTypeDef; - - -/** - * @brief SDIO Command Control structure - */ -typedef struct -{ - uint32_t Argument; /*!< Specifies the SDIO command argument which is sent - to a card as part of a command message. If a command - contains an argument, it must be loaded into this register - before writing the command to the command register. */ - - uint32_t CmdIndex; /*!< Specifies the SDIO command index. It must be Min_Data = 0 and - Max_Data = 64 */ - - uint32_t Response; /*!< Specifies the SDIO response type. - This parameter can be a value of @ref SDIO_Response_Type */ - - uint32_t WaitForInterrupt; /*!< Specifies whether SDIO wait for interrupt request is - enabled or disabled. - This parameter can be a value of @ref SDIO_Wait_Interrupt_State */ - - uint32_t CPSM; /*!< Specifies whether SDIO Command path state machine (CPSM) - is enabled or disabled. - This parameter can be a value of @ref SDIO_CPSM_State */ -}SDIO_CmdInitTypeDef; - - -/** - * @brief SDIO Data Control structure - */ -typedef struct -{ - uint32_t DataTimeOut; /*!< Specifies the data timeout period in card bus clock periods. */ - - uint32_t DataLength; /*!< Specifies the number of data bytes to be transferred. */ - - uint32_t DataBlockSize; /*!< Specifies the data block size for block transfer. - This parameter can be a value of @ref SDIO_Data_Block_Size */ - - uint32_t TransferDir; /*!< Specifies the data transfer direction, whether the transfer - is a read or write. - This parameter can be a value of @ref SDIO_Transfer_Direction */ - - uint32_t TransferMode; /*!< Specifies whether data transfer is in stream or block mode. - This parameter can be a value of @ref SDIO_Transfer_Type */ - - uint32_t DPSM; /*!< Specifies whether SDIO Data path state machine (DPSM) - is enabled or disabled. - This parameter can be a value of @ref SDIO_DPSM_State */ -}SDIO_DataInitTypeDef; - -/** - * @} - */ - -/* Exported constants --------------------------------------------------------*/ -/** @defgroup SDMMC_LL_Exported_Constants SDMMC_LL Exported Constants - * @{ - */ - -/** @defgroup SDIO_Clock_Edge Clock Edge - * @{ - */ -#define SDIO_CLOCK_EDGE_RISING ((uint32_t)0x00000000) -#define SDIO_CLOCK_EDGE_FALLING SDIO_CLKCR_NEGEDGE - -#define IS_SDIO_CLOCK_EDGE(EDGE) (((EDGE) == SDIO_CLOCK_EDGE_RISING) || \ - ((EDGE) == SDIO_CLOCK_EDGE_FALLING)) -/** - * @} - */ - -/** @defgroup SDIO_Clock_Bypass Clock Bypass - * @{ - */ -#define SDIO_CLOCK_BYPASS_DISABLE ((uint32_t)0x00000000) -#define SDIO_CLOCK_BYPASS_ENABLE SDIO_CLKCR_BYPASS - -#define IS_SDIO_CLOCK_BYPASS(BYPASS) (((BYPASS) == SDIO_CLOCK_BYPASS_DISABLE) || \ - ((BYPASS) == SDIO_CLOCK_BYPASS_ENABLE)) -/** - * @} - */ - -/** @defgroup SDIO_Clock_Power_Save Clock Power Saving - * @{ - */ -#define SDIO_CLOCK_POWER_SAVE_DISABLE ((uint32_t)0x00000000) -#define SDIO_CLOCK_POWER_SAVE_ENABLE SDIO_CLKCR_PWRSAV - -#define IS_SDIO_CLOCK_POWER_SAVE(SAVE) (((SAVE) == SDIO_CLOCK_POWER_SAVE_DISABLE) || \ - ((SAVE) == SDIO_CLOCK_POWER_SAVE_ENABLE)) -/** - * @} - */ - -/** @defgroup SDIO_Bus_Wide Bus Width - * @{ - */ -#define SDIO_BUS_WIDE_1B ((uint32_t)0x00000000) -#define SDIO_BUS_WIDE_4B SDIO_CLKCR_WIDBUS_0 -#define SDIO_BUS_WIDE_8B SDIO_CLKCR_WIDBUS_1 - -#define IS_SDIO_BUS_WIDE(WIDE) (((WIDE) == SDIO_BUS_WIDE_1B) || \ - ((WIDE) == SDIO_BUS_WIDE_4B) || \ - ((WIDE) == SDIO_BUS_WIDE_8B)) -/** - * @} - */ - -/** @defgroup SDIO_Hardware_Flow_Control Hardware Flow Control - * @{ - */ -#define SDIO_HARDWARE_FLOW_CONTROL_DISABLE ((uint32_t)0x00000000) -#define SDIO_HARDWARE_FLOW_CONTROL_ENABLE SDIO_CLKCR_HWFC_EN - -#define IS_SDIO_HARDWARE_FLOW_CONTROL(CONTROL) (((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_DISABLE) || \ - ((CONTROL) == SDIO_HARDWARE_FLOW_CONTROL_ENABLE)) -/** - * @} - */ - -/** @defgroup SDIO_Clock_Division Clock Division - * @{ - */ -#define IS_SDIO_CLKDIV(DIV) ((DIV) <= 0xFF) -/** - * @} - */ - -/** @defgroup SDIO_Command_Index Command Index - * @{ - */ -#define IS_SDIO_CMD_INDEX(INDEX) ((INDEX) < 0x40) -/** - * @} - */ - -/** @defgroup SDIO_Response_Type Response Type - * @{ - */ -#define SDIO_RESPONSE_NO ((uint32_t)0x00000000) -#define SDIO_RESPONSE_SHORT SDIO_CMD_WAITRESP_0 -#define SDIO_RESPONSE_LONG SDIO_CMD_WAITRESP - -#define IS_SDIO_RESPONSE(RESPONSE) (((RESPONSE) == SDIO_RESPONSE_NO) || \ - ((RESPONSE) == SDIO_RESPONSE_SHORT) || \ - ((RESPONSE) == SDIO_RESPONSE_LONG)) -/** - * @} - */ - -/** @defgroup SDIO_Wait_Interrupt_State Wait Interrupt - * @{ - */ -#define SDIO_WAIT_NO ((uint32_t)0x00000000) -#define SDIO_WAIT_IT SDIO_CMD_WAITINT -#define SDIO_WAIT_PEND SDIO_CMD_WAITPEND - -#define IS_SDIO_WAIT(WAIT) (((WAIT) == SDIO_WAIT_NO) || \ - ((WAIT) == SDIO_WAIT_IT) || \ - ((WAIT) == SDIO_WAIT_PEND)) -/** - * @} - */ - -/** @defgroup SDIO_CPSM_State CPSM State - * @{ - */ -#define SDIO_CPSM_DISABLE ((uint32_t)0x00000000) -#define SDIO_CPSM_ENABLE SDIO_CMD_CPSMEN - -#define IS_SDIO_CPSM(CPSM) (((CPSM) == SDIO_CPSM_DISABLE) || \ - ((CPSM) == SDIO_CPSM_ENABLE)) -/** - * @} - */ - -/** @defgroup SDIO_Response_Registers Response Register - * @{ - */ -#define SDIO_RESP1 ((uint32_t)0x00000000) -#define SDIO_RESP2 ((uint32_t)0x00000004) -#define SDIO_RESP3 ((uint32_t)0x00000008) -#define SDIO_RESP4 ((uint32_t)0x0000000C) - -#define IS_SDIO_RESP(RESP) (((RESP) == SDIO_RESP1) || \ - ((RESP) == SDIO_RESP2) || \ - ((RESP) == SDIO_RESP3) || \ - ((RESP) == SDIO_RESP4)) -/** - * @} - */ - -/** @defgroup SDIO_Data_Length Data Lenght - * @{ - */ -#define IS_SDIO_DATA_LENGTH(LENGTH) ((LENGTH) <= 0x01FFFFFF) -/** - * @} - */ - -/** @defgroup SDIO_Data_Block_Size Data Block Size - * @{ - */ -#define SDIO_DATABLOCK_SIZE_1B ((uint32_t)0x00000000) -#define SDIO_DATABLOCK_SIZE_2B SDIO_DCTRL_DBLOCKSIZE_0 -#define SDIO_DATABLOCK_SIZE_4B SDIO_DCTRL_DBLOCKSIZE_1 -#define SDIO_DATABLOCK_SIZE_8B ((uint32_t)0x00000030) -#define SDIO_DATABLOCK_SIZE_16B SDIO_DCTRL_DBLOCKSIZE_2 -#define SDIO_DATABLOCK_SIZE_32B ((uint32_t)0x00000050) -#define SDIO_DATABLOCK_SIZE_64B ((uint32_t)0x00000060) -#define SDIO_DATABLOCK_SIZE_128B ((uint32_t)0x00000070) -#define SDIO_DATABLOCK_SIZE_256B SDIO_DCTRL_DBLOCKSIZE_3 -#define SDIO_DATABLOCK_SIZE_512B ((uint32_t)0x00000090) -#define SDIO_DATABLOCK_SIZE_1024B ((uint32_t)0x000000A0) -#define SDIO_DATABLOCK_SIZE_2048B ((uint32_t)0x000000B0) -#define SDIO_DATABLOCK_SIZE_4096B ((uint32_t)0x000000C0) -#define SDIO_DATABLOCK_SIZE_8192B ((uint32_t)0x000000D0) -#define SDIO_DATABLOCK_SIZE_16384B ((uint32_t)0x000000E0) - -#define IS_SDIO_BLOCK_SIZE(SIZE) (((SIZE) == SDIO_DATABLOCK_SIZE_1B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_2B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_4B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_8B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_16B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_32B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_64B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_128B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_256B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_512B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_1024B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_2048B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_4096B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_8192B) || \ - ((SIZE) == SDIO_DATABLOCK_SIZE_16384B)) -/** - * @} - */ - -/** @defgroup SDIO_Transfer_Direction Transfer Direction - * @{ - */ -#define SDIO_TRANSFER_DIR_TO_CARD ((uint32_t)0x00000000) -#define SDIO_TRANSFER_DIR_TO_SDIO SDIO_DCTRL_DTDIR - -#define IS_SDIO_TRANSFER_DIR(DIR) (((DIR) == SDIO_TRANSFER_DIR_TO_CARD) || \ - ((DIR) == SDIO_TRANSFER_DIR_TO_SDIO)) -/** - * @} - */ - -/** @defgroup SDIO_Transfer_Type Transfer Type - * @{ - */ -#define SDIO_TRANSFER_MODE_BLOCK ((uint32_t)0x00000000) -#define SDIO_TRANSFER_MODE_STREAM SDIO_DCTRL_DTMODE - -#define IS_SDIO_TRANSFER_MODE(MODE) (((MODE) == SDIO_TRANSFER_MODE_BLOCK) || \ - ((MODE) == SDIO_TRANSFER_MODE_STREAM)) -/** - * @} - */ - -/** @defgroup SDIO_DPSM_State DPSM State - * @{ - */ -#define SDIO_DPSM_DISABLE ((uint32_t)0x00000000) -#define SDIO_DPSM_ENABLE SDIO_DCTRL_DTEN - -#define IS_SDIO_DPSM(DPSM) (((DPSM) == SDIO_DPSM_DISABLE) ||\ - ((DPSM) == SDIO_DPSM_ENABLE)) -/** - * @} - */ - -/** @defgroup SDIO_Read_Wait_Mode Read Wait Mode - * @{ - */ -#define SDIO_READ_WAIT_MODE_DATA2 ((uint32_t)0x00000000) -#define SDIO_READ_WAIT_MODE_CLK ((uint32_t)0x00000001) - -#define IS_SDIO_READWAIT_MODE(MODE) (((MODE) == SDIO_READ_WAIT_MODE_CLK) || \ - ((MODE) == SDIO_READ_WAIT_MODE_DATA2)) -/** - * @} - */ - -/** @defgroup SDIO_Interrupt_sources Interrupt Sources - * @{ - */ -#define SDIO_IT_CCRCFAIL SDIO_STA_CCRCFAIL -#define SDIO_IT_DCRCFAIL SDIO_STA_DCRCFAIL -#define SDIO_IT_CTIMEOUT SDIO_STA_CTIMEOUT -#define SDIO_IT_DTIMEOUT SDIO_STA_DTIMEOUT -#define SDIO_IT_TXUNDERR SDIO_STA_TXUNDERR -#define SDIO_IT_RXOVERR SDIO_STA_RXOVERR -#define SDIO_IT_CMDREND SDIO_STA_CMDREND -#define SDIO_IT_CMDSENT SDIO_STA_CMDSENT -#define SDIO_IT_DATAEND SDIO_STA_DATAEND -#define SDIO_IT_STBITERR SDIO_STA_STBITERR -#define SDIO_IT_DBCKEND SDIO_STA_DBCKEND -#define SDIO_IT_CMDACT SDIO_STA_CMDACT -#define SDIO_IT_TXACT SDIO_STA_TXACT -#define SDIO_IT_RXACT SDIO_STA_RXACT -#define SDIO_IT_TXFIFOHE SDIO_STA_TXFIFOHE -#define SDIO_IT_RXFIFOHF SDIO_STA_RXFIFOHF -#define SDIO_IT_TXFIFOF SDIO_STA_TXFIFOF -#define SDIO_IT_RXFIFOF SDIO_STA_RXFIFOF -#define SDIO_IT_TXFIFOE SDIO_STA_TXFIFOE -#define SDIO_IT_RXFIFOE SDIO_STA_RXFIFOE -#define SDIO_IT_TXDAVL SDIO_STA_TXDAVL -#define SDIO_IT_RXDAVL SDIO_STA_RXDAVL -#define SDIO_IT_SDIOIT SDIO_STA_SDIOIT -#define SDIO_IT_CEATAEND SDIO_STA_CEATAEND -/** - * @} - */ - -/** @defgroup SDIO_Flags Flags - * @{ - */ -#define SDIO_FLAG_CCRCFAIL SDIO_STA_CCRCFAIL -#define SDIO_FLAG_DCRCFAIL SDIO_STA_DCRCFAIL -#define SDIO_FLAG_CTIMEOUT SDIO_STA_CTIMEOUT -#define SDIO_FLAG_DTIMEOUT SDIO_STA_DTIMEOUT -#define SDIO_FLAG_TXUNDERR SDIO_STA_TXUNDERR -#define SDIO_FLAG_RXOVERR SDIO_STA_RXOVERR -#define SDIO_FLAG_CMDREND SDIO_STA_CMDREND -#define SDIO_FLAG_CMDSENT SDIO_STA_CMDSENT -#define SDIO_FLAG_DATAEND SDIO_STA_DATAEND -#define SDIO_FLAG_STBITERR SDIO_STA_STBITERR -#define SDIO_FLAG_DBCKEND SDIO_STA_DBCKEND -#define SDIO_FLAG_CMDACT SDIO_STA_CMDACT -#define SDIO_FLAG_TXACT SDIO_STA_TXACT -#define SDIO_FLAG_RXACT SDIO_STA_RXACT -#define SDIO_FLAG_TXFIFOHE SDIO_STA_TXFIFOHE -#define SDIO_FLAG_RXFIFOHF SDIO_STA_RXFIFOHF -#define SDIO_FLAG_TXFIFOF SDIO_STA_TXFIFOF -#define SDIO_FLAG_RXFIFOF SDIO_STA_RXFIFOF -#define SDIO_FLAG_TXFIFOE SDIO_STA_TXFIFOE -#define SDIO_FLAG_RXFIFOE SDIO_STA_RXFIFOE -#define SDIO_FLAG_TXDAVL SDIO_STA_TXDAVL -#define SDIO_FLAG_RXDAVL SDIO_STA_RXDAVL -#define SDIO_FLAG_SDIOIT SDIO_STA_SDIOIT -#define SDIO_FLAG_CEATAEND SDIO_STA_CEATAEND -/** - * @} - */ - -/** - * @} - */ -/* Exported macro ------------------------------------------------------------*/ -/** @defgroup SDMMC_LL_Exported_macros SDMMC_LL Exported Macros - * @{ - */ - -/** @defgroup SDMMC_LL_Alias_Region Bit Address in the alias region - * @{ - */ -/* ------------ SDIO registers bit address in the alias region -------------- */ -#define SDIO_OFFSET (SDIO_BASE - PERIPH_BASE) - -/* --- CLKCR Register ---*/ -/* Alias word address of CLKEN bit */ -#define CLKCR_OFFSET (SDIO_OFFSET + 0x04) -#define CLKEN_BITNUMBER 0x08 -#define CLKCR_CLKEN_BB (PERIPH_BB_BASE + (CLKCR_OFFSET * 32) + (CLKEN_BITNUMBER * 4)) - -/* --- CMD Register ---*/ -/* Alias word address of SDIOSUSPEND bit */ -#define CMD_OFFSET (SDIO_OFFSET + 0x0C) -#define SDIOSUSPEND_BITNUMBER 0x0B -#define CMD_SDIOSUSPEND_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (SDIOSUSPEND_BITNUMBER * 4)) - -/* Alias word address of ENCMDCOMPL bit */ -#define ENCMDCOMPL_BITNUMBER 0x0C -#define CMD_ENCMDCOMPL_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ENCMDCOMPL_BITNUMBER * 4)) - -/* Alias word address of NIEN bit */ -#define NIEN_BITNUMBER 0x0D -#define CMD_NIEN_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (NIEN_BITNUMBER * 4)) - -/* Alias word address of ATACMD bit */ -#define ATACMD_BITNUMBER 0x0E -#define CMD_ATACMD_BB (PERIPH_BB_BASE + (CMD_OFFSET * 32) + (ATACMD_BITNUMBER * 4)) - -/* --- DCTRL Register ---*/ -/* Alias word address of DMAEN bit */ -#define DCTRL_OFFSET (SDIO_OFFSET + 0x2C) -#define DMAEN_BITNUMBER 0x03 -#define DCTRL_DMAEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (DMAEN_BITNUMBER * 4)) - -/* Alias word address of RWSTART bit */ -#define RWSTART_BITNUMBER 0x08 -#define DCTRL_RWSTART_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTART_BITNUMBER * 4)) - -/* Alias word address of RWSTOP bit */ -#define RWSTOP_BITNUMBER 0x09 -#define DCTRL_RWSTOP_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWSTOP_BITNUMBER * 4)) - -/* Alias word address of RWMOD bit */ -#define RWMOD_BITNUMBER 0x0A -#define DCTRL_RWMOD_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (RWMOD_BITNUMBER * 4)) - -/* Alias word address of SDIOEN bit */ -#define SDIOEN_BITNUMBER 0x0B -#define DCTRL_SDIOEN_BB (PERIPH_BB_BASE + (DCTRL_OFFSET * 32) + (SDIOEN_BITNUMBER * 4)) -/** - * @} - */ - -/** @defgroup SDMMC_LL_Register Bits And Addresses Definitions - * @brief SDMMC_LL registers bit address in the alias region - * @{ - */ - -/* ---------------------- SDIO registers bit mask --------------------------- */ -/* --- CLKCR Register ---*/ -/* CLKCR register clear mask */ -#define CLKCR_CLEAR_MASK ((uint32_t)(SDIO_CLKCR_CLKDIV | SDIO_CLKCR_PWRSAV |\ - SDIO_CLKCR_BYPASS | SDIO_CLKCR_WIDBUS |\ - SDIO_CLKCR_NEGEDGE | SDIO_CLKCR_HWFC_EN)) - -/* --- PWRCTRL Register ---*/ -/* --- DCTRL Register ---*/ -/* SDIO DCTRL Clear Mask */ -#define DCTRL_CLEAR_MASK ((uint32_t)(SDIO_DCTRL_DTEN | SDIO_DCTRL_DTDIR |\ - SDIO_DCTRL_DTMODE | SDIO_DCTRL_DBLOCKSIZE)) - -/* --- CMD Register ---*/ -/* CMD Register clear mask */ -#define CMD_CLEAR_MASK ((uint32_t)(SDIO_CMD_CMDINDEX | SDIO_CMD_WAITRESP |\ - SDIO_CMD_WAITINT | SDIO_CMD_WAITPEND |\ - SDIO_CMD_CPSMEN | SDIO_CMD_SDIOSUSPEND)) - -/* SDIO RESP Registers Address */ -#define SDIO_RESP_ADDR ((uint32_t)(SDIO_BASE + 0x14)) - -/* SDIO Initialization Frequency (400KHz max) */ -#define SDIO_INIT_CLK_DIV ((uint8_t)0x76) - -/* SDIO Data Transfer Frequency (25MHz max) */ -#define SDIO_TRANSFER_CLK_DIV ((uint8_t)0x0) -/** - * @} - */ - -/** @defgroup SDMMC_LL_Interrupt_Clock Interrupt And Clock Configuration - * @brief macros to handle interrupts and specific clock configurations - * @{ - */ - -/** - * @brief Enable the SDIO device. - * @retval None - */ -#define __SDIO_ENABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = ENABLE) - -/** - * @brief Disable the SDIO device. - * @retval None - */ -#define __SDIO_DISABLE() (*(__IO uint32_t *)CLKCR_CLKEN_BB = DISABLE) - -/** - * @brief Enable the SDIO DMA transfer. - * @retval None - */ -#define __SDIO_DMA_ENABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = ENABLE) - -/** - * @brief Disable the SDIO DMA transfer. - * @retval None - */ -#define __SDIO_DMA_DISABLE() (*(__IO uint32_t *)DCTRL_DMAEN_BB = DISABLE) - -/** - * @brief Enable the SDIO device interrupt. - * @param __INSTANCE__ : Pointer to SDIO register base - * @param __INTERRUPT__ : specifies the SDIO interrupt sources to be enabled. - * This parameter can be one or a combination of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt - * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide - * bus mode interrupt - * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt - * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt - * @arg SDIO_IT_TXACT: Data transmit in progress interrupt - * @arg SDIO_IT_RXACT: Data receive in progress interrupt - * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt - * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt - * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt - * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt - * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt - * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt - * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt - * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt - * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt - * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt - * @retval None - */ -#define __SDIO_ENABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK |= (__INTERRUPT__)) - -/** - * @brief Disable the SDIO device interrupt. - * @param __INSTANCE__ : Pointer to SDIO register base - * @param __INTERRUPT__ : specifies the SDIO interrupt sources to be disabled. - * This parameter can be one or a combination of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt - * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide - * bus mode interrupt - * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt - * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt - * @arg SDIO_IT_TXACT: Data transmit in progress interrupt - * @arg SDIO_IT_RXACT: Data receive in progress interrupt - * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt - * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt - * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt - * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt - * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt - * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt - * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt - * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt - * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt - * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt - * @retval None - */ -#define __SDIO_DISABLE_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->MASK &= ~(__INTERRUPT__)) - -/** - * @brief Checks whether the specified SDIO flag is set or not. - * @param __INSTANCE__ : Pointer to SDIO register base - * @param __FLAG__: specifies the flag to check. - * This parameter can be one of the following values: - * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) - * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) - * @arg SDIO_FLAG_CTIMEOUT: Command response timeout - * @arg SDIO_FLAG_DTIMEOUT: Data timeout - * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error - * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error - * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) - * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) - * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) - * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode. - * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) - * @arg SDIO_FLAG_CMDACT: Command transfer in progress - * @arg SDIO_FLAG_TXACT: Data transmit in progress - * @arg SDIO_FLAG_RXACT: Data receive in progress - * @arg SDIO_FLAG_TXFIFOHE: Transmit FIFO Half Empty - * @arg SDIO_FLAG_RXFIFOHF: Receive FIFO Half Full - * @arg SDIO_FLAG_TXFIFOF: Transmit FIFO full - * @arg SDIO_FLAG_RXFIFOF: Receive FIFO full - * @arg SDIO_FLAG_TXFIFOE: Transmit FIFO empty - * @arg SDIO_FLAG_RXFIFOE: Receive FIFO empty - * @arg SDIO_FLAG_TXDAVL: Data available in transmit FIFO - * @arg SDIO_FLAG_RXDAVL: Data available in receive FIFO - * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received - * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 - * @retval The new state of SDIO_FLAG (SET or RESET). - */ -#define __SDIO_GET_FLAG(__INSTANCE__, __FLAG__) (((__INSTANCE__)->STA &(__FLAG__)) != RESET) - - -/** - * @brief Clears the SDIO pending flags. - * @param __INSTANCE__ : Pointer to SDIO register base - * @param __FLAG__: specifies the flag to clear. - * This parameter can be one or a combination of the following values: - * @arg SDIO_FLAG_CCRCFAIL: Command response received (CRC check failed) - * @arg SDIO_FLAG_DCRCFAIL: Data block sent/received (CRC check failed) - * @arg SDIO_FLAG_CTIMEOUT: Command response timeout - * @arg SDIO_FLAG_DTIMEOUT: Data timeout - * @arg SDIO_FLAG_TXUNDERR: Transmit FIFO underrun error - * @arg SDIO_FLAG_RXOVERR: Received FIFO overrun error - * @arg SDIO_FLAG_CMDREND: Command response received (CRC check passed) - * @arg SDIO_FLAG_CMDSENT: Command sent (no response required) - * @arg SDIO_FLAG_DATAEND: Data end (data counter, SDIDCOUNT, is zero) - * @arg SDIO_FLAG_STBITERR: Start bit not detected on all data signals in wide bus mode - * @arg SDIO_FLAG_DBCKEND: Data block sent/received (CRC check passed) - * @arg SDIO_FLAG_SDIOIT: SD I/O interrupt received - * @arg SDIO_FLAG_CEATAEND: CE-ATA command completion signal received for CMD61 - * @retval None - */ -#define __SDIO_CLEAR_FLAG(__INSTANCE__, __FLAG__) ((__INSTANCE__)->ICR = (__FLAG__)) - -/** - * @brief Checks whether the specified SDIO interrupt has occurred or not. - * @param __INSTANCE__ : Pointer to SDIO register base - * @param __INTERRUPT__: specifies the SDIO interrupt source to check. - * This parameter can be one of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, SDIDCOUNT, is zero) interrupt - * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide - * bus mode interrupt - * @arg SDIO_IT_DBCKEND: Data block sent/received (CRC check passed) interrupt - * @arg SDIO_IT_CMDACT: Command transfer in progress interrupt - * @arg SDIO_IT_TXACT: Data transmit in progress interrupt - * @arg SDIO_IT_RXACT: Data receive in progress interrupt - * @arg SDIO_IT_TXFIFOHE: Transmit FIFO Half Empty interrupt - * @arg SDIO_IT_RXFIFOHF: Receive FIFO Half Full interrupt - * @arg SDIO_IT_TXFIFOF: Transmit FIFO full interrupt - * @arg SDIO_IT_RXFIFOF: Receive FIFO full interrupt - * @arg SDIO_IT_TXFIFOE: Transmit FIFO empty interrupt - * @arg SDIO_IT_RXFIFOE: Receive FIFO empty interrupt - * @arg SDIO_IT_TXDAVL: Data available in transmit FIFO interrupt - * @arg SDIO_IT_RXDAVL: Data available in receive FIFO interrupt - * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt - * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 interrupt - * @retval The new state of SDIO_IT (SET or RESET). - */ -#define __SDIO_GET_IT (__INSTANCE__, __INTERRUPT__) (((__INSTANCE__)->STA &(__INTERRUPT__)) == (__INTERRUPT__)) - -/** - * @brief Clears the SDIO's interrupt pending bits. - * @param __INSTANCE__ : Pointer to SDIO register base - * @param __INTERRUPT__: specifies the interrupt pending bit to clear. - * This parameter can be one or a combination of the following values: - * @arg SDIO_IT_CCRCFAIL: Command response received (CRC check failed) interrupt - * @arg SDIO_IT_DCRCFAIL: Data block sent/received (CRC check failed) interrupt - * @arg SDIO_IT_CTIMEOUT: Command response timeout interrupt - * @arg SDIO_IT_DTIMEOUT: Data timeout interrupt - * @arg SDIO_IT_TXUNDERR: Transmit FIFO underrun error interrupt - * @arg SDIO_IT_RXOVERR: Received FIFO overrun error interrupt - * @arg SDIO_IT_CMDREND: Command response received (CRC check passed) interrupt - * @arg SDIO_IT_CMDSENT: Command sent (no response required) interrupt - * @arg SDIO_IT_DATAEND: Data end (data counter, SDIO_DCOUNT, is zero) interrupt - * @arg SDIO_IT_STBITERR: Start bit not detected on all data signals in wide - * bus mode interrupt - * @arg SDIO_IT_SDIOIT: SD I/O interrupt received interrupt - * @arg SDIO_IT_CEATAEND: CE-ATA command completion signal received for CMD61 - * @retval None - */ -#define __SDIO_CLEAR_IT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->ICR = (__INTERRUPT__)) - -/** - * @brief Enable Start the SD I/O Read Wait operation. - * @retval None - */ -#define __SDIO_START_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = ENABLE) - -/** - * @brief Disable Start the SD I/O Read Wait operations. - * @retval None - */ -#define __SDIO_START_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTART_BB = DISABLE) - -/** - * @brief Enable Start the SD I/O Read Wait operation. - * @retval None - */ -#define __SDIO_STOP_READWAIT_ENABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = ENABLE) - -/** - * @brief Disable Stop the SD I/O Read Wait operations. - * @retval None - */ -#define __SDIO_STOP_READWAIT_DISABLE() (*(__IO uint32_t *) DCTRL_RWSTOP_BB = DISABLE) - -/** - * @brief Enable the SD I/O Mode Operation. - * @retval None - */ -#define __SDIO_OPERATION_ENABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = ENABLE) - -/** - * @brief Disable the SD I/O Mode Operation. - * @retval None - */ -#define __SDIO_OPERATION_DISABLE() (*(__IO uint32_t *) DCTRL_SDIOEN_BB = DISABLE) - -/** - * @brief Enable the SD I/O Suspend command sending. - * @retval None - */ -#define __SDIO_SUSPEND_CMD_ENABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = ENABLE) - -/** - * @brief Disable the SD I/O Suspend command sending. - * @retval None - */ -#define __SDIO_SUSPEND_CMD_DISABLE() (*(__IO uint32_t *) CMD_SDIOSUSPEND_BB = DISABLE) - -#if !defined(STM32F446xx) -/** - * @brief Enable the command completion signal. - * @retval None - */ -#define __SDIO_CEATA_CMD_COMPLETION_ENABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = ENABLE) - -/** - * @brief Disable the command completion signal. - * @retval None - */ -#define __SDIO_CEATA_CMD_COMPLETION_DISABLE() (*(__IO uint32_t *) CMD_ENCMDCOMPL_BB = DISABLE) - -/** - * @brief Enable the CE-ATA interrupt. - * @retval None - */ -#define __SDIO_CEATA_ENABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)0) - -/** - * @brief Disable the CE-ATA interrupt. - * @retval None - */ -#define __SDIO_CEATA_DISABLE_IT() (*(__IO uint32_t *) CMD_NIEN_BB = (uint32_t)1) - -/** - * @brief Enable send CE-ATA command (CMD61). - * @retval None - */ -#define __SDIO_CEATA_SENDCMD_ENABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = ENABLE) - -/** - * @brief Disable send CE-ATA command (CMD61). - * @retval None - */ -#define __SDIO_CEATA_SENDCMD_DISABLE() (*(__IO uint32_t *) CMD_ATACMD_BB = DISABLE) -#endif /* !defined(STM32F446xx) */ -/** - * @} - */ - -/** - * @} - */ - -/* Exported functions --------------------------------------------------------*/ -/** @addtogroup SDMMC_LL_Exported_Functions - * @{ - */ - -/* Initialization/de-initialization functions **********************************/ -/** @addtogroup HAL_SDMMC_LL_Group1 - * @{ - */ -HAL_StatusTypeDef SDIO_Init(SDIO_TypeDef *SDIOx, SDIO_InitTypeDef Init); -/** - * @} - */ - -/* I/O operation functions *****************************************************/ -/** @addtogroup HAL_SDMMC_LL_Group2 - * @{ - */ -/* Blocking mode: Polling */ -uint32_t SDIO_ReadFIFO(SDIO_TypeDef *SDIOx); -HAL_StatusTypeDef SDIO_WriteFIFO(SDIO_TypeDef *SDIOx, uint32_t *pWriteData); -/** - * @} - */ - -/* Peripheral Control functions ************************************************/ -/** @addtogroup HAL_SDMMC_LL_Group3 - * @{ - */ -HAL_StatusTypeDef SDIO_PowerState_ON(SDIO_TypeDef *SDIOx); -HAL_StatusTypeDef SDIO_PowerState_OFF(SDIO_TypeDef *SDIOx); -uint32_t SDIO_GetPowerState(SDIO_TypeDef *SDIOx); - -/* Command path state machine (CPSM) management functions */ -HAL_StatusTypeDef SDIO_SendCommand(SDIO_TypeDef *SDIOx, SDIO_CmdInitTypeDef *SDIO_CmdInitStruct); -uint8_t SDIO_GetCommandResponse(SDIO_TypeDef *SDIOx); -uint32_t SDIO_GetResponse(uint32_t SDIO_RESP); - -/* Data path state machine (DPSM) management functions */ -HAL_StatusTypeDef SDIO_DataConfig(SDIO_TypeDef *SDIOx, SDIO_DataInitTypeDef* SDIO_DataInitStruct); -uint32_t SDIO_GetDataCounter(SDIO_TypeDef *SDIOx); -uint32_t SDIO_GetFIFOCount(SDIO_TypeDef *SDIOx); - -/* SDIO IO Cards mode management functions */ -HAL_StatusTypeDef SDIO_SetSDIOReadWaitMode(uint32_t SDIO_ReadWaitMode); - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - -#endif /* __STM32F4xx_LL_SDMMC_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h deleted file mode 100644 index 234367c..0000000 --- a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_usb.h +++ /dev/null @@ -1,463 +0,0 @@ -/** - ****************************************************************************** - * @file stm32f4xx_ll_usb.h - * @author MCD Application Team - * @version V1.3.2 - * @date 26-June-2015 - * @brief Header file of USB Core HAL module. - ****************************************************************************** - * @attention - * - * <h2><center>© COPYRIGHT(c) 2015 STMicroelectronics</center></h2> - * - * Redistribution and use in source and binary forms, with or without modification, - * are permitted provided that the following conditions are met: - * 1. Redistributions of source code must retain the above copyright notice, - * this list of conditions and the following disclaimer. - * 2. Redistributions in binary form must reproduce the above copyright notice, - * this list of conditions and the following disclaimer in the documentation - * and/or other materials provided with the distribution. - * 3. Neither the name of STMicroelectronics nor the names of its contributors - * may be used to endorse or promote products derived from this software - * without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" - * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE - * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE - * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL - * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR - * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER - * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, - * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - ****************************************************************************** - */ - -/* Define to prevent recursive inclusion -------------------------------------*/ -#ifndef __STM32F4xx_LL_USB_H -#define __STM32F4xx_LL_USB_H - -#ifdef __cplusplus - extern "C" { -#endif - -/* Includes ------------------------------------------------------------------*/ -#include "stm32f4xx_hal_def.h" - -/** @addtogroup STM32F4xx_HAL - * @{ - */ - -/** @addtogroup USB_Core - * @{ - */ - -/* Exported types ------------------------------------------------------------*/ - -/** - * @brief USB Mode definition - */ -typedef enum -{ - USB_OTG_DEVICE_MODE = 0, - USB_OTG_HOST_MODE = 1, - USB_OTG_DRD_MODE = 2 - -}USB_OTG_ModeTypeDef; - -/** - * @brief URB States definition - */ -typedef enum { - URB_IDLE = 0, - URB_DONE, - URB_NOTREADY, - URB_NYET, - URB_ERROR, - URB_STALL - -}USB_OTG_URBStateTypeDef; - -/** - * @brief Host channel States definition - */ -typedef enum { - HC_IDLE = 0, - HC_XFRC, - HC_HALTED, - HC_NAK, - HC_NYET, - HC_STALL, - HC_XACTERR, - HC_BBLERR, - HC_DATATGLERR - -}USB_OTG_HCStateTypeDef; - -/** - * @brief PCD Initialization Structure definition - */ -typedef struct -{ - uint32_t dev_endpoints; /*!< Device Endpoints number. - This parameter depends on the used USB core. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint32_t Host_channels; /*!< Host Channels number. - This parameter Depends on the used USB core. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint32_t speed; /*!< USB Core speed. - This parameter can be any value of @ref USB_Core_Speed_ */ - - uint32_t dma_enable; /*!< Enable or disable of the USB embedded DMA. */ - - uint32_t ep0_mps; /*!< Set the Endpoint 0 Max Packet size. - This parameter can be any value of @ref USB_EP0_MPS_ */ - - uint32_t phy_itface; /*!< Select the used PHY interface. - This parameter can be any value of @ref USB_Core_PHY_ */ - - uint32_t Sof_enable; /*!< Enable or disable the output of the SOF signal. */ - - uint32_t low_power_enable; /*!< Enable or disable the low power mode. */ - - uint32_t lpm_enable; /*!< Enable or disable Link Power Management. */ - - uint32_t vbus_sensing_enable; /*!< Enable or disable the VBUS Sensing feature. */ - - uint32_t use_dedicated_ep1; /*!< Enable or disable the use of the dedicated EP1 interrupt. */ - - uint32_t use_external_vbus; /*!< Enable or disable the use of the external VBUS. */ - -}USB_OTG_CfgTypeDef; - -typedef struct -{ - uint8_t num; /*!< Endpoint number - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint8_t is_in; /*!< Endpoint direction - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t is_stall; /*!< Endpoint stall condition - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t type; /*!< Endpoint type - This parameter can be any value of @ref USB_EP_Type_ */ - - uint8_t data_pid_start; /*!< Initial data PID - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t even_odd_frame; /*!< IFrame parity - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint16_t tx_fifo_num; /*!< Transmission FIFO number - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint32_t maxpacket; /*!< Endpoint Max packet size - This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ - - uint8_t *xfer_buff; /*!< Pointer to transfer buffer */ - - uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address */ - - uint32_t xfer_len; /*!< Current transfer length */ - - uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer */ - -}USB_OTG_EPTypeDef; - -typedef struct -{ - uint8_t dev_addr ; /*!< USB device address. - This parameter must be a number between Min_Data = 1 and Max_Data = 255 */ - - uint8_t ch_num; /*!< Host channel number. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint8_t ep_num; /*!< Endpoint number. - This parameter must be a number between Min_Data = 1 and Max_Data = 15 */ - - uint8_t ep_is_in; /*!< Endpoint direction - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t speed; /*!< USB Host speed. - This parameter can be any value of @ref USB_Core_Speed_ */ - - uint8_t do_ping; /*!< Enable or disable the use of the PING protocol for HS mode. */ - - uint8_t process_ping; /*!< Execute the PING protocol for HS mode. */ - - uint8_t ep_type; /*!< Endpoint Type. - This parameter can be any value of @ref USB_EP_Type_ */ - - uint16_t max_packet; /*!< Endpoint Max packet size. - This parameter must be a number between Min_Data = 0 and Max_Data = 64KB */ - - uint8_t data_pid; /*!< Initial data PID. - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t *xfer_buff; /*!< Pointer to transfer buffer. */ - - uint32_t xfer_len; /*!< Current transfer length. */ - - uint32_t xfer_count; /*!< Partial transfer length in case of multi packet transfer. */ - - uint8_t toggle_in; /*!< IN transfer current toggle flag. - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint8_t toggle_out; /*!< OUT transfer current toggle flag - This parameter must be a number between Min_Data = 0 and Max_Data = 1 */ - - uint32_t dma_addr; /*!< 32 bits aligned transfer buffer address. */ - - uint32_t ErrCnt; /*!< Host channel error count.*/ - - USB_OTG_URBStateTypeDef urb_state; /*!< URB state. - This parameter can be any value of @ref USB_OTG_URBStateTypeDef */ - - USB_OTG_HCStateTypeDef state; /*!< Host Channel state. - This parameter can be any value of @ref USB_OTG_HCStateTypeDef */ - -}USB_OTG_HCTypeDef; - -/* Exported constants --------------------------------------------------------*/ - -/** @defgroup PCD_Exported_Constants PCD Exported Constants - * @{ - */ - -/** @defgroup USB_Core_Mode_ USB Core Mode - * @{ - */ -#define USB_OTG_MODE_DEVICE 0 -#define USB_OTG_MODE_HOST 1 -#define USB_OTG_MODE_DRD 2 -/** - * @} - */ - -/** @defgroup USB_Core_Speed_ USB Core Speed - * @{ - */ -#define USB_OTG_SPEED_HIGH 0 -#define USB_OTG_SPEED_HIGH_IN_FULL 1 -#define USB_OTG_SPEED_LOW 2 -#define USB_OTG_SPEED_FULL 3 -/** - * @} - */ - -/** @defgroup USB_Core_PHY_ USB Core PHY - * @{ - */ -#define USB_OTG_ULPI_PHY 1 -#define USB_OTG_EMBEDDED_PHY 2 -/** - * @} - */ - -/** @defgroup USB_Core_MPS_ USB Core MPS - * @{ - */ -#define USB_OTG_HS_MAX_PACKET_SIZE 512 -#define USB_OTG_FS_MAX_PACKET_SIZE 64 -#define USB_OTG_MAX_EP0_SIZE 64 -/** - * @} - */ - -/** @defgroup USB_Core_Phy_Frequency_ USB Core Phy Frequency - * @{ - */ -#define DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ (0 << 1) -#define DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ (1 << 1) -#define DSTS_ENUMSPD_LS_PHY_6MHZ (2 << 1) -#define DSTS_ENUMSPD_FS_PHY_48MHZ (3 << 1) -/** - * @} - */ - -/** @defgroup USB_CORE_Frame_Interval_ USB CORE Frame Interval - * @{ - */ -#define DCFG_FRAME_INTERVAL_80 0 -#define DCFG_FRAME_INTERVAL_85 1 -#define DCFG_FRAME_INTERVAL_90 2 -#define DCFG_FRAME_INTERVAL_95 3 -/** - * @} - */ - -/** @defgroup USB_EP0_MPS_ USB EP0 MPS - * @{ - */ -#define DEP0CTL_MPS_64 0 -#define DEP0CTL_MPS_32 1 -#define DEP0CTL_MPS_16 2 -#define DEP0CTL_MPS_8 3 -/** - * @} - */ - -/** @defgroup USB_EP_Speed_ USB EP Speed - * @{ - */ -#define EP_SPEED_LOW 0 -#define EP_SPEED_FULL 1 -#define EP_SPEED_HIGH 2 -/** - * @} - */ - -/** @defgroup USB_EP_Type_ USB EP Type - * @{ - */ -#define EP_TYPE_CTRL 0 -#define EP_TYPE_ISOC 1 -#define EP_TYPE_BULK 2 -#define EP_TYPE_INTR 3 -#define EP_TYPE_MSK 3 -/** - * @} - */ - -/** @defgroup USB_STS_Defines_ USB STS Defines - * @{ - */ -#define STS_GOUT_NAK 1 -#define STS_DATA_UPDT 2 -#define STS_XFER_COMP 3 -#define STS_SETUP_COMP 4 -#define STS_SETUP_UPDT 6 -/** - * @} - */ - -/** @defgroup HCFG_SPEED_Defines_ HCFG SPEED Defines - * @{ - */ -#define HCFG_30_60_MHZ 0 -#define HCFG_48_MHZ 1 -#define HCFG_6_MHZ 2 -/** - * @} - */ - -/** @defgroup HPRT0_PRTSPD_SPEED_Defines_ HPRT0 PRTSPD SPEED Defines - * @{ - */ -#define HPRT0_PRTSPD_HIGH_SPEED 0 -#define HPRT0_PRTSPD_FULL_SPEED 1 -#define HPRT0_PRTSPD_LOW_SPEED 2 -/** - * @} - */ - -#define HCCHAR_CTRL 0 -#define HCCHAR_ISOC 1 -#define HCCHAR_BULK 2 -#define HCCHAR_INTR 3 - -#define HC_PID_DATA0 0 -#define HC_PID_DATA2 1 -#define HC_PID_DATA1 2 -#define HC_PID_SETUP 3 - -#define GRXSTS_PKTSTS_IN 2 -#define GRXSTS_PKTSTS_IN_XFER_COMP 3 -#define GRXSTS_PKTSTS_DATA_TOGGLE_ERR 5 -#define GRXSTS_PKTSTS_CH_HALTED 7 - -#define USBx_PCGCCTL *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_PCGCCTL_BASE) -#define USBx_HPRT0 *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_HOST_PORT_BASE) - -#define USBx_DEVICE ((USB_OTG_DeviceTypeDef *)((uint32_t )USBx + USB_OTG_DEVICE_BASE)) -#define USBx_INEP(i) ((USB_OTG_INEndpointTypeDef *)((uint32_t)USBx + USB_OTG_IN_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE)) -#define USBx_OUTEP(i) ((USB_OTG_OUTEndpointTypeDef *)((uint32_t)USBx + USB_OTG_OUT_ENDPOINT_BASE + (i)*USB_OTG_EP_REG_SIZE)) -#define USBx_DFIFO(i) *(__IO uint32_t *)((uint32_t)USBx + USB_OTG_FIFO_BASE + (i) * USB_OTG_FIFO_SIZE) - -#define USBx_HOST ((USB_OTG_HostTypeDef *)((uint32_t )USBx + USB_OTG_HOST_BASE)) -#define USBx_HC(i) ((USB_OTG_HostChannelTypeDef *)((uint32_t)USBx + USB_OTG_HOST_CHANNEL_BASE + (i)*USB_OTG_HOST_CHANNEL_SIZE)) -/** - * @} - */ -/* Exported macro ------------------------------------------------------------*/ -#define USB_MASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK &= ~(__INTERRUPT__)) -#define USB_UNMASK_INTERRUPT(__INSTANCE__, __INTERRUPT__) ((__INSTANCE__)->GINTMSK |= (__INTERRUPT__)) - -#define CLEAR_IN_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_INEP(__EPNUM__)->DIEPINT = (__INTERRUPT__)) -#define CLEAR_OUT_EP_INTR(__EPNUM__, __INTERRUPT__) (USBx_OUTEP(__EPNUM__)->DOEPINT = (__INTERRUPT__)) - -/* Exported functions --------------------------------------------------------*/ -HAL_StatusTypeDef USB_CoreInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init); -HAL_StatusTypeDef USB_DevInit(USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef Init); -HAL_StatusTypeDef USB_EnableGlobalInt(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_DisableGlobalInt(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_SetCurrentMode(USB_OTG_GlobalTypeDef *USBx , USB_OTG_ModeTypeDef mode); -HAL_StatusTypeDef USB_SetDevSpeed(USB_OTG_GlobalTypeDef *USBx , uint8_t speed); -HAL_StatusTypeDef USB_FlushRxFifo (USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_FlushTxFifo (USB_OTG_GlobalTypeDef *USBx, uint32_t num ); -HAL_StatusTypeDef USB_ActivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_DeactivateEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_ActivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_DeactivateDedicatedEndpoint(USB_OTG_GlobalTypeDef *USBx, USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_EPStartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma); -HAL_StatusTypeDef USB_EP0StartXfer(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep, uint8_t dma); -HAL_StatusTypeDef USB_WritePacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *src, uint8_t ch_ep_num, uint16_t len, uint8_t dma); -void * USB_ReadPacket(USB_OTG_GlobalTypeDef *USBx, uint8_t *dest, uint16_t len); -HAL_StatusTypeDef USB_EPSetStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_EPClearStall(USB_OTG_GlobalTypeDef *USBx , USB_OTG_EPTypeDef *ep); -HAL_StatusTypeDef USB_SetDevAddress (USB_OTG_GlobalTypeDef *USBx, uint8_t address); -HAL_StatusTypeDef USB_DevConnect (USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_DevDisconnect (USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_StopDevice(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_ActivateSetup (USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_EP0_OutStart(USB_OTG_GlobalTypeDef *USBx, uint8_t dma, uint8_t *psetup); -uint8_t USB_GetDevSpeed(USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_GetMode(USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_ReadInterrupts (USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_ReadDevAllOutEpInterrupt (USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_ReadDevOutEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum); -uint32_t USB_ReadDevAllInEpInterrupt (USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_ReadDevInEPInterrupt (USB_OTG_GlobalTypeDef *USBx , uint8_t epnum); -void USB_ClearInterrupts (USB_OTG_GlobalTypeDef *USBx, uint32_t interrupt); - -HAL_StatusTypeDef USB_HostInit (USB_OTG_GlobalTypeDef *USBx, USB_OTG_CfgTypeDef cfg); -HAL_StatusTypeDef USB_InitFSLSPClkSel(USB_OTG_GlobalTypeDef *USBx , uint8_t freq); -HAL_StatusTypeDef USB_ResetPort(USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_DriveVbus (USB_OTG_GlobalTypeDef *USBx, uint8_t state); -uint32_t USB_GetHostSpeed (USB_OTG_GlobalTypeDef *USBx); -uint32_t USB_GetCurrentFrame (USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_HC_Init(USB_OTG_GlobalTypeDef *USBx, - uint8_t ch_num, - uint8_t epnum, - uint8_t dev_address, - uint8_t speed, - uint8_t ep_type, - uint16_t mps); -HAL_StatusTypeDef USB_HC_StartXfer(USB_OTG_GlobalTypeDef *USBx, USB_OTG_HCTypeDef *hc, uint8_t dma); -uint32_t USB_HC_ReadInterrupt (USB_OTG_GlobalTypeDef *USBx); -HAL_StatusTypeDef USB_HC_Halt(USB_OTG_GlobalTypeDef *USBx , uint8_t hc_num); -HAL_StatusTypeDef USB_DoPing(USB_OTG_GlobalTypeDef *USBx , uint8_t ch_num); -HAL_StatusTypeDef USB_StopHost(USB_OTG_GlobalTypeDef *USBx); - -/** - * @} - */ - -/** - * @} - */ - -#ifdef __cplusplus -} -#endif - - -#endif /* __STM32F4xx_LL_USB_H */ - -/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |