diff options
| -rw-r--r-- | Makefile | 10 | ||||
| -rw-r--r-- | projects/bootloader/Makefile | 13 | ||||
| -rw-r--r-- | projects/bootloader/bootloader.c | 30 | ||||
| -rw-r--r-- | projects/bootloader/startup_stm32f429xx.S | 564 | ||||
| -rw-r--r-- | projects/bootloader/stm-init.c | 8 | ||||
| -rw-r--r-- | projects/bootloader/stm32f4xx_it.c | 220 | ||||
| -rw-r--r-- | projects/cli-test/cli-test.c | 12 | ||||
| -rw-r--r-- | projects/cli-test/mgmt-cli.c | 3 |
8 files changed, 832 insertions, 28 deletions
@@ -34,11 +34,11 @@ export TOPLEVEL = $(shell pwd) BOARD = TARGET_CRYPTECH_ALPHA # Location of the Libraries folder from the STM32F4 Standard Peripheral Library -LIBS_DIR = $(TOPLEVEL)/libraries -MBED_DIR = $(LIBS_DIR)/mbed -CMSIS_DIR = $(MBED_DIR)/targets/cmsis/TARGET_STM/TARGET_STM32F4 -BOARD_DIR = $(CMSIS_DIR)/$(BOARD) -RTOS_DIR = $(MBED_DIR)/rtos +export LIBS_DIR = $(TOPLEVEL)/libraries +export MBED_DIR = $(LIBS_DIR)/mbed +export CMSIS_DIR = $(MBED_DIR)/targets/cmsis/TARGET_STM/TARGET_STM32F4 +export BOARD_DIR = $(CMSIS_DIR)/$(BOARD) +export RTOS_DIR = $(MBED_DIR)/rtos export LIBTFM_DIR = $(LIBS_DIR)/thirdparty/libtfm export LIBHAL_DIR = $(LIBS_DIR)/libhal export LIBCLI_DIR = $(LIBS_DIR)/libcli diff --git a/projects/bootloader/Makefile b/projects/bootloader/Makefile index 4eef758..1e489c2 100644 --- a/projects/bootloader/Makefile +++ b/projects/bootloader/Makefile @@ -2,6 +2,19 @@ PROG = bootloader OBJS = crc32.o dfu.o +BOARD_OBJS = \ + ./stm-init.o \ + $(TOPLEVEL)/stm-fmc.o \ + $(TOPLEVEL)/stm-uart.o \ + $(TOPLEVEL)/stm-flash.o \ + $(TOPLEVEL)/syscalls.o \ + $(BOARD_DIR)/system_stm32f4xx.o \ + $(BOARD_DIR)/stm32f4xx_hal_msp.o \ + ./startup_stm32f429xx.o \ + ./stm32f4xx_it.o + +LIBS = $(MBED_DIR)/libstmf4.a + all: $(PROG:=.elf) %.elf: %.o $(BOARD_OBJS) $(OBJS) $(LIBS) diff --git a/projects/bootloader/bootloader.c b/projects/bootloader/bootloader.c index ab3c1d9..30cd120 100644 --- a/projects/bootloader/bootloader.c +++ b/projects/bootloader/bootloader.c @@ -37,6 +37,8 @@ #include "stm-uart.h" #include "dfu.h" +#undef HAL_Delay + /* Linker symbols are strange in C. Make regular pointers for sanity. */ __IO uint32_t *dfu_control = &CRYPTECH_DFU_CONTROL; __IO uint32_t *dfu_firmware = &CRYPTECH_FIRMWARE_START; @@ -49,16 +51,20 @@ __IO uint32_t *dfu_code_ptr = &CRYPTECH_FIRMWARE_START + 1; typedef void (*pFunction)(void); -/* This is it's own function to make it more convenient to set a breakpoint at it in gdb */ -void do_early_dfu_jump(void) +/* called from Reset_Handler */ +void check_early_dfu_jump(void) { - pFunction loaded_app = (pFunction) *dfu_code_ptr; - /* Set the stack pointer to the correct one for the firmware */ - __set_MSP(*dfu_msp_ptr); - /* Set the Vector Table Offset Register */ - SCB->VTOR = (uint32_t) dfu_firmware; - loaded_app(); - while (1); + /* Check if we've just rebooted in order to jump to the firmware. */ + if (*dfu_control == HARDWARE_EARLY_DFU_JUMP) { + *dfu_control = 0; + pFunction loaded_app = (pFunction) *dfu_code_ptr; + /* Set the stack pointer to the correct one for the firmware */ + __set_MSP(*dfu_msp_ptr); + /* Set the Vector Table Offset Register */ + SCB->VTOR = (uint32_t) dfu_firmware; + loaded_app(); + while (1); + } } int should_dfu() @@ -86,12 +92,6 @@ main() { int status; - /* Check if we've just rebooted in order to jump to the firmware. */ - if (*dfu_control == HARDWARE_EARLY_DFU_JUMP) { - *dfu_control = 0; - do_early_dfu_jump(); - } - stm_init(); uart_send_string2(STM_UART_MGMT, (char *) "\r\n\r\nThis is the bootloader speaking..."); diff --git a/projects/bootloader/startup_stm32f429xx.S b/projects/bootloader/startup_stm32f429xx.S new file mode 100644 index 0000000..fc8bf34 --- /dev/null +++ b/projects/bootloader/startup_stm32f429xx.S @@ -0,0 +1,564 @@ +/** + ****************************************************************************** + * @file startup_stm32f429xx.s + * @author MCD Application Team + * @version V2.4.1 + * @date 09-October-2015 + * @brief STM32F429xx Devices vector table for GCC based toolchains. + * This module performs: + * - Set the initial SP + * - Set the initial PC == Reset_Handler, + * - Set the vector table entries with the exceptions ISR address + * - Branches to main in the C library (which eventually + * calls main()). + * After Reset the Cortex-M4 processor is in Thread mode, + * priority is Privileged, and the Stack is set to Main. + ****************************************************************************** + * @attention + * + * <h2><center>© COPYRIGHT 2015 STMicroelectronics</center></h2> + * + * Redistribution and use in source and binary forms, with or without modification, + * are permitted provided that the following conditions are met: + * 1. Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright notice, + * this list of conditions and the following disclaimer in the documentation + * and/or other materials provided with the distribution. + * 3. Neither the name of STMicroelectronics nor the names of its contributors + * may be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE + * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR + * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER + * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + ****************************************************************************** + */ + + .syntax unified + .cpu cortex-m4 + .fpu softvfp + .thumb + +.global g_pfnVectors +.global Default_Handler + +/* start address for the initialization values of the .data section. +defined in linker script */ +.word _sidata +/* start address for the .data section. defined in linker script */ +.word _sdata +/* end address for the .data section. defined in linker script */ +.word _edata +/* start address for the .bss section. defined in linker script */ +.word _sbss +/* end address for the .bss section. defined in linker script */ +.word _ebss +/* stack used for SystemInit_ExtMemCtl; always internal RAM used */ + +/** + * @brief This is the code that gets called when the processor first + * starts execution following a reset event. Only the absolutely + * necessary set is performed, after which the application + * supplied main() routine is called. + * @param None + * @retval : None +*/ + + .section .text.Reset_Handler + .weak Reset_Handler + .type Reset_Handler, %function +Reset_Handler: + ldr sp, =_estack /* set stack pointer */ + +/* Copy the data segment initializers from flash to SRAM */ + movs r1, #0 + b LoopCopyDataInit + +CopyDataInit: + ldr r3, =_sidata + ldr r3, [r3, r1] + str r3, [r0, r1] + adds r1, r1, #4 + +LoopCopyDataInit: + ldr r0, =_sdata + ldr r3, =_edata + adds r2, r0, r1 + cmp r2, r3 + bcc CopyDataInit + ldr r2, =_sbss + b LoopFillZerobss +/* Zero fill the bss segment. */ +FillZerobss: + movs r3, #0 + str r3, [r2], #4 + +LoopFillZerobss: + ldr r3, = _ebss + cmp r2, r3 + bcc FillZerobss + + /* Check if we've just rebooted in order to jump to the firmware. */ + bl check_early_dfu_jump + +/* Call the clock system intitialization function.*/ + bl SystemInit +/* Call static constructors */ + bl __libc_init_array +/* Call the application's entry point.*/ + bl main + bx lr +.size Reset_Handler, .-Reset_Handler + +/** + * @brief This is the code that gets called when the processor receives an + * unexpected interrupt. This simply enters an infinite loop, preserving + * the system state for examination by a debugger. + * @param None + * @retval None +*/ + .section .text.Default_Handler,"ax",%progbits +Default_Handler: +Infinite_Loop: + b Infinite_Loop + .size Default_Handler, .-Default_Handler +/****************************************************************************** +* +* The minimal vector table for a Cortex M3. Note that the proper constructs +* must be placed on this to ensure that it ends up at physical address +* 0x0000.0000. +* +*******************************************************************************/ + .section .isr_vector,"a",%progbits + .type g_pfnVectors, %object + .size g_pfnVectors, .-g_pfnVectors + +g_pfnVectors: + .word _estack + .word Reset_Handler + + .word NMI_Handler + .word HardFault_Handler + .word MemManage_Handler + .word BusFault_Handler + .word UsageFault_Handler + .word 0 + .word 0 + .word 0 + .word 0 + .word SVC_Handler + .word DebugMon_Handler + .word 0 + .word PendSV_Handler + .word SysTick_Handler + + /* External Interrupts */ + .word WWDG_IRQHandler /* Window WatchDog */ + .word PVD_IRQHandler /* PVD through EXTI Line detection */ + .word TAMP_STAMP_IRQHandler /* Tamper and TimeStamps through the EXTI line */ + .word RTC_WKUP_IRQHandler /* RTC Wakeup through the EXTI line */ + .word FLASH_IRQHandler /* FLASH */ + .word RCC_IRQHandler /* RCC */ + .word EXTI0_IRQHandler /* EXTI Line0 */ + .word EXTI1_IRQHandler /* EXTI Line1 */ + .word EXTI2_IRQHandler /* EXTI Line2 */ + .word EXTI3_IRQHandler /* EXTI Line3 */ + .word EXTI4_IRQHandler /* EXTI Line4 */ + .word DMA1_Stream0_IRQHandler /* DMA1 Stream 0 */ + .word DMA1_Stream1_IRQHandler /* DMA1 Stream 1 */ + .word DMA1_Stream2_IRQHandler /* DMA1 Stream 2 */ + .word DMA1_Stream3_IRQHandler /* DMA1 Stream 3 */ + .word DMA1_Stream4_IRQHandler /* DMA1 Stream 4 */ + .word DMA1_Stream5_IRQHandler /* DMA1 Stream 5 */ + .word DMA1_Stream6_IRQHandler /* DMA1 Stream 6 */ + .word ADC_IRQHandler /* ADC1, ADC2 and ADC3s */ + .word CAN1_TX_IRQHandler /* CAN1 TX */ + .word CAN1_RX0_IRQHandler /* CAN1 RX0 */ + .word CAN1_RX1_IRQHandler /* CAN1 RX1 */ + .word CAN1_SCE_IRQHandler /* CAN1 SCE */ + .word EXTI9_5_IRQHandler /* External Line[9:5]s */ + .word TIM1_BRK_TIM9_IRQHandler /* TIM1 Break and TIM9 */ + .word TIM1_UP_TIM10_IRQHandler /* TIM1 Update and TIM10 */ + .word TIM1_TRG_COM_TIM11_IRQHandler /* TIM1 Trigger and Commutation and TIM11 */ + .word TIM1_CC_IRQHandler /* TIM1 Capture Compare */ + .word TIM2_IRQHandler /* TIM2 */ + .word TIM3_IRQHandler /* TIM3 */ + .word TIM4_IRQHandler /* TIM4 */ + .word I2C1_EV_IRQHandler /* I2C1 Event */ + .word I2C1_ER_IRQHandler /* I2C1 Error */ + .word I2C2_EV_IRQHandler /* I2C2 Event */ + .word I2C2_ER_IRQHandler /* I2C2 Error */ + .word SPI1_IRQHandler /* SPI1 */ + .word SPI2_IRQHandler /* SPI2 */ + .word USART1_IRQHandler /* USART1 */ + .word USART2_IRQHandler /* USART2 */ + .word USART3_IRQHandler /* USART3 */ + .word EXTI15_10_IRQHandler /* External Line[15:10]s */ + .word RTC_Alarm_IRQHandler /* RTC Alarm (A and B) through EXTI Line */ + .word OTG_FS_WKUP_IRQHandler /* USB OTG FS Wakeup through EXTI line */ + .word TIM8_BRK_TIM12_IRQHandler /* TIM8 Break and TIM12 */ + .word TIM8_UP_TIM13_IRQHandler /* TIM8 Update and TIM13 */ + .word TIM8_TRG_COM_TIM14_IRQHandler /* TIM8 Trigger and Commutation and TIM14 */ + .word TIM8_CC_IRQHandler /* TIM8 Capture Compare */ + .word DMA1_Stream7_IRQHandler /* DMA1 Stream7 */ + .word FMC_IRQHandler /* FMC */ + .word SDIO_IRQHandler /* SDIO */ + .word TIM5_IRQHandler /* TIM5 */ + .word SPI3_IRQHandler /* SPI3 */ + .word UART4_IRQHandler /* UART4 */ + .word UART5_IRQHandler /* UART5 */ + .word TIM6_DAC_IRQHandler /* TIM6 and DAC1&2 underrun errors */ + .word TIM7_IRQHandler /* TIM7 */ + .word DMA2_Stream0_IRQHandler /* DMA2 Stream 0 */ + .word DMA2_Stream1_IRQHandler /* DMA2 Stream 1 */ + .word DMA2_Stream2_IRQHandler /* DMA2 Stream 2 */ + .word DMA2_Stream3_IRQHandler /* DMA2 Stream 3 */ + .word DMA2_Stream4_IRQHandler /* DMA2 Stream 4 */ + .word ETH_IRQHandler /* Ethernet */ + .word ETH_WKUP_IRQHandler /* Ethernet Wakeup through EXTI line */ + .word CAN2_TX_IRQHandler /* CAN2 TX */ + .word CAN2_RX0_IRQHandler /* CAN2 RX0 */ + .word CAN2_RX1_IRQHandler /* CAN2 RX1 */ + .word CAN2_SCE_IRQHandler /* CAN2 SCE */ + .word OTG_FS_IRQHandler /* USB OTG FS */ + .word DMA2_Stream5_IRQHandler /* DMA2 Stream 5 */ + .word DMA2_Stream6_IRQHandler /* DMA2 Stream 6 */ + .word DMA2_Stream7_IRQHandler /* DMA2 Stream 7 */ + .word USART6_IRQHandler /* USART6 */ + .word I2C3_EV_IRQHandler /* I2C3 event */ + .word I2C3_ER_IRQHandler /* I2C3 error */ + .word OTG_HS_EP1_OUT_IRQHandler /* USB OTG HS End Point 1 Out */ + .word OTG_HS_EP1_IN_IRQHandler /* USB OTG HS End Point 1 In */ + .word OTG_HS_WKUP_IRQHandler /* USB OTG HS Wakeup through EXTI */ + .word OTG_HS_IRQHandler /* USB OTG HS */ + .word DCMI_IRQHandler /* DCMI */ + .word 0 /* Reserved */ + .word HASH_RNG_IRQHandler /* Hash and Rng */ + .word FPU_IRQHandler /* FPU */ + .word UART7_IRQHandler /* UART7 */ + .word UART8_IRQHandler /* UART8 */ + .word SPI4_IRQHandler /* SPI4 */ + .word SPI5_IRQHandler /* SPI5 */ + .word SPI6_IRQHandler /* SPI6 */ + .word SAI1_IRQHandler /* SAI1 */ + .word LTDC_IRQHandler /* LTDC_IRQHandler */ + .word LTDC_ER_IRQHandler /* LTDC_ER_IRQHandler */ + .word DMA2D_IRQHandler /* DMA2D */ + +/******************************************************************************* +* +* Provide weak aliases for each Exception handler to the Default_Handler. +* As they are weak aliases, any function with the same name will override +* this definition. +* +*******************************************************************************/ + .weak NMI_Handler + .thumb_set NMI_Handler,Default_Handler + + .weak HardFault_Handler + .thumb_set HardFault_Handler,Default_Handler + + .weak MemManage_Handler + .thumb_set MemManage_Handler,Default_Handler + + .weak BusFault_Handler + .thumb_set BusFault_Handler,Default_Handler + + .weak UsageFault_Handler + .thumb_set UsageFault_Handler,Default_Handler + + .weak SVC_Handler + .thumb_set SVC_Handler,Default_Handler + + .weak DebugMon_Handler + .thumb_set DebugMon_Handler,Default_Handler + + .weak PendSV_Handler + .thumb_set PendSV_Handler,Default_Handler + + .weak SysTick_Handler + .thumb_set SysTick_Handler,Default_Handler + + .weak WWDG_IRQHandler + .thumb_set WWDG_IRQHandler,Default_Handler + + .weak PVD_IRQHandler + .thumb_set PVD_IRQHandler,Default_Handler + + .weak TAMP_STAMP_IRQHandler + .thumb_set TAMP_STAMP_IRQHandler,Default_Handler + + .weak RTC_WKUP_IRQHandler + .thumb_set RTC_WKUP_IRQHandler,Default_Handler + + .weak FLASH_IRQHandler + .thumb_set FLASH_IRQHandler,Default_Handler + + .weak RCC_IRQHandler + .thumb_set RCC_IRQHandler,Default_Handler + + .weak EXTI0_IRQHandler + .thumb_set EXTI0_IRQHandler,Default_Handler + + .weak EXTI1_IRQHandler + .thumb_set EXTI1_IRQHandler,Default_Handler + + .weak EXTI2_IRQHandler + .thumb_set EXTI2_IRQHandler,Default_Handler + + .weak EXTI3_IRQHandler + .thumb_set EXTI3_IRQHandler,Default_Handler + + .weak EXTI4_IRQHandler + .thumb_set EXTI4_IRQHandler,Default_Handler + + .weak DMA1_Stream0_IRQHandler + .thumb_set DMA1_Stream0_IRQHandler,Default_Handler + + .weak DMA1_Stream1_IRQHandler + .thumb_set DMA1_Stream1_IRQHandler,Default_Handler + + .weak DMA1_Stream2_IRQHandler + .thumb_set DMA1_Stream2_IRQHandler,Default_Handler + + .weak DMA1_Stream3_IRQHandler + .thumb_set DMA1_Stream3_IRQHandler,Default_Handler + + .weak DMA1_Stream4_IRQHandler + .thumb_set DMA1_Stream4_IRQHandler,Default_Handler + + .weak DMA1_Stream5_IRQHandler + .thumb_set DMA1_Stream5_IRQHandler,Default_Handler + + .weak DMA1_Stream6_IRQHandler + .thumb_set DMA1_Stream6_IRQHandler,Default_Handler + + .weak ADC_IRQHandler + .thumb_set ADC_IRQHandler,Default_Handler + + .weak CAN1_TX_IRQHandler + .thumb_set CAN1_TX_IRQHandler,Default_Handler + + .weak CAN1_RX0_IRQHandler + .thumb_set CAN1_RX0_IRQHandler,Default_Handler + + .weak CAN1_RX1_IRQHandler + .thumb_set CAN1_RX1_IRQHandler,Default_Handler + + .weak CAN1_SCE_IRQHandler + .thumb_set CAN1_SCE_IRQHandler,Default_Handler + + .weak EXTI9_5_IRQHandler + .thumb_set EXTI9_5_IRQHandler,Default_Handler + + .weak TIM1_BRK_TIM9_IRQHandler + .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler + + .weak TIM1_UP_TIM10_IRQHandler + .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler + + .weak TIM1_TRG_COM_TIM11_IRQHandler + .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler + + .weak TIM1_CC_IRQHandler + .thumb_set TIM1_CC_IRQHandler,Default_Handler + + .weak TIM2_IRQHandler + .thumb_set TIM2_IRQHandler,Default_Handler + + .weak TIM3_IRQHandler + .thumb_set TIM3_IRQHandler,Default_Handler + + .weak TIM4_IRQHandler + .thumb_set TIM4_IRQHandler,Default_Handler + + .weak I2C1_EV_IRQHandler + .thumb_set I2C1_EV_IRQHandler,Default_Handler + + .weak I2C1_ER_IRQHandler + .thumb_set I2C1_ER_IRQHandler,Default_Handler + + .weak I2C2_EV_IRQHandler + .thumb_set I2C2_EV_IRQHandler,Default_Handler + + .weak I2C2_ER_IRQHandler + .thumb_set I2C2_ER_IRQHandler,Default_Handler + + .weak SPI1_IRQHandler + .thumb_set SPI1_IRQHandler,Default_Handler + + .weak SPI2_IRQHandler + .thumb_set SPI2_IRQHandler,Default_Handler + + .weak USART1_IRQHandler + .thumb_set USART1_IRQHandler,Default_Handler + + .weak USART2_IRQHandler + .thumb_set USART2_IRQHandler,Default_Handler + + .weak USART3_IRQHandler + .thumb_set USART3_IRQHandler,Default_Handler + + .weak EXTI15_10_IRQHandler + .thumb_set EXTI15_10_IRQHandler,Default_Handler + + .weak RTC_Alarm_IRQHandler + .thumb_set RTC_Alarm_IRQHandler,Default_Handler + + .weak OTG_FS_WKUP_IRQHandler + .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler + + .weak TIM8_BRK_TIM12_IRQHandler + .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler + + .weak TIM8_UP_TIM13_IRQHandler + .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler + + .weak TIM8_TRG_COM_TIM14_IRQHandler + .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler + + .weak TIM8_CC_IRQHandler + .thumb_set TIM8_CC_IRQHandler,Default_Handler + + .weak DMA1_Stream7_IRQHandler + .thumb_set DMA1_Stream7_IRQHandler,Default_Handler + + .weak FMC_IRQHandler + .thumb_set FMC_IRQHandler,Default_Handler + + .weak SDIO_IRQHandler + .thumb_set SDIO_IRQHandler,Default_Handler + + .weak TIM5_IRQHandler + .thumb_set TIM5_IRQHandler,Default_Handler + + .weak SPI3_IRQHandler + .thumb_set SPI3_IRQHandler,Default_Handler + + .weak UART4_IRQHandler + .thumb_set UART4_IRQHandler,Default_Handler + + .weak UART5_IRQHandler + .thumb_set UART5_IRQHandler,Default_Handler + + .weak TIM6_DAC_IRQHandler + .thumb_set TIM6_DAC_IRQHandler,Default_Handler + + .weak TIM7_IRQHandler + .thumb_set TIM7_IRQHandler,Default_Handler + + .weak DMA2_Stream0_IRQHandler + .thumb_set DMA2_Stream0_IRQHandler,Default_Handler + + .weak DMA2_Stream1_IRQHandler + .thumb_set DMA2_Stream1_IRQHandler,Default_Handler + + .weak DMA2_Stream2_IRQHandler + .thumb_set DMA2_Stream2_IRQHandler,Default_Handler + + .weak DMA2_Stream3_IRQHandler + .thumb_set DMA2_Stream3_IRQHandler,Default_Handler + + .weak DMA2_Stream4_IRQHandler + .thumb_set DMA2_Stream4_IRQHandler,Default_Handler + + .weak ETH_IRQHandler + .thumb_set ETH_IRQHandler,Default_Handler + + .weak ETH_WKUP_IRQHandler + .thumb_set ETH_WKUP_IRQHandler,Default_Handler + + .weak CAN2_TX_IRQHandler + .thumb_set CAN2_TX_IRQHandler,Default_Handler + + .weak CAN2_RX0_IRQHandler + .thumb_set CAN2_RX0_IRQHandler,Default_Handler + + .weak CAN2_RX1_IRQHandler + .thumb_set CAN2_RX1_IRQHandler,Default_Handler + + .weak CAN2_SCE_IRQHandler + .thumb_set CAN2_SCE_IRQHandler,Default_Handler + + .weak OTG_FS_IRQHandler + .thumb_set OTG_FS_IRQHandler,Default_Handler + + .weak DMA2_Stream5_IRQHandler + .thumb_set DMA2_Stream5_IRQHandler,Default_Handler + + .weak DMA2_Stream6_IRQHandler + .thumb_set DMA2_Stream6_IRQHandler,Default_Handler + + .weak DMA2_Stream7_IRQHandler + .thumb_set DMA2_Stream7_IRQHandler,Default_Handler + + .weak USART6_IRQHandler + .thumb_set USART6_IRQHandler,Default_Handler + + .weak I2C3_EV_IRQHandler + .thumb_set I2C3_EV_IRQHandler,Default_Handler + + .weak I2C3_ER_IRQHandler + .thumb_set I2C3_ER_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_OUT_IRQHandler + .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler + + .weak OTG_HS_EP1_IN_IRQHandler + .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler + + .weak OTG_HS_WKUP_IRQHandler + .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler + + .weak OTG_HS_IRQHandler + .thumb_set OTG_HS_IRQHandler,Default_Handler + + .weak DCMI_IRQHandler + .thumb_set DCMI_IRQHandler,Default_Handler + + .weak HASH_RNG_IRQHandler + .thumb_set HASH_RNG_IRQHandler,Default_Handler + + .weak FPU_IRQHandler + .thumb_set FPU_IRQHandler,Default_Handler + + .weak UART7_IRQHandler + .thumb_set UART7_IRQHandler,Default_Handler + + .weak UART8_IRQHandler + .thumb_set UART8_IRQHandler,Default_Handler + + .weak SPI4_IRQHandler + .thumb_set SPI4_IRQHandler,Default_Handler + + .weak SPI5_IRQHandler + .thumb_set SPI5_IRQHandler,Default_Handler + + .weak SPI6_IRQHandler + .thumb_set SPI6_IRQHandler,Default_Handler + + .weak SAI1_IRQHandler + .thumb_set SAI1_IRQHandler,Default_Handler + + .weak LTDC_IRQHandler + .thumb_set LTDC_IRQHandler,Default_Handler + + .weak LTDC_ER_IRQHandler + .thumb_set LTDC_ER_IRQHandler,Default_Handler + + .weak DMA2D_IRQHandler + .thumb_set DMA2D_IRQHandler,Default_Handler + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ + + + diff --git a/projects/bootloader/stm-init.c b/projects/bootloader/stm-init.c new file mode 100644 index 0000000..209dc8c --- /dev/null +++ b/projects/bootloader/stm-init.c @@ -0,0 +1,8 @@ +/* Disable modules that the bootloader doesn't need. */ + +#include "stm32f4xx_hal.h" + +#undef HAL_I2C_MODULE_ENABLED +#undef HAL_SPI_MODULE_ENABLED + +#include "../../stm-init.c" diff --git a/projects/bootloader/stm32f4xx_it.c b/projects/bootloader/stm32f4xx_it.c new file mode 100644 index 0000000..7aed16b --- /dev/null +++ b/projects/bootloader/stm32f4xx_it.c @@ -0,0 +1,220 @@ +/** +****************************************************************************** +* @file GPIO/GPIO_IOToggle/Src/stm32f4xx_it.c +* @author MCD Application Team +* @version V1.0.1 +* @date 26-February-2014 +* @brief Main Interrupt Service Routines. +* This file provides template for all exceptions handler and +* peripherals interrupt service routine. +****************************************************************************** +* @attention +* +* <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2> +* +* Redistribution and use in source and binary forms, with or without modification, +* are permitted provided that the following conditions are met: +* 1. Redistributions of source code must retain the above copyright notice, +* this list of conditions and the following disclaimer. +* 2. Redistributions in binary form must reproduce the above copyright notice, +* this list of conditions and the following disclaimer in the documentation +* and/or other materials provided with the distribution. +* 3. Neither the name of STMicroelectronics nor the names of its contributors +* may be used to endorse or promote products derived from this software +* without specific prior written permission. +* +* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE +* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL +* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR +* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, +* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +* +****************************************************************************** +*/ + +#include "stm-init.h" +#include "stm-uart.h" + +/******************************************************************************/ +/* Cortex-M4 Processor Exceptions Handlers */ +/******************************************************************************/ + +/* + * We define these to make debugging easier, because otherwise gdb reports + * HardFault_Handler as WWDG_IRQHandler. + */ + +/** + * @brief This function handles NMI exception. + * @param None + * @retval None + */ +void NMI_Handler(void) +{ +} + +/** + * @brief This function handles Hard Fault exception. + * @param None + * @retval None + */ +void HardFault_Handler(void) +{ + /* Go to infinite loop when Hard Fault exception occurs */ + while (1) { ; } +} + +/** + * @brief This function handles Memory Manage exception. + * @param None + * @retval None + */ +void MemManage_Handler(void) +{ + /* Go to infinite loop when Memory Manage exception occurs */ + while (1) { ; } +} + +/** + * @brief This function handles Bus Fault exception. + * @param None + * @retval None + */ +void BusFault_Handler(void) +{ + /* Go to infinite loop when Bus Fault exception occurs */ + while (1) { ; } +} + +/** + * @brief This function handles Usage Fault exception. + * @param None + * @retval None + */ +void UsageFault_Handler(void) +{ + /* Go to infinite loop when Usage Fault exception occurs */ + while (1) { ; } +} + + +/** + * @brief This function handles SVCall exception. + * @param None + * @retval None + */ +void SVC_Handler(void) +{ +} + +/** + * @brief This function handles Debug Monitor exception. + * @param None + * @retval None + */ +void DebugMon_Handler(void) +{ +} + +/** + * @brief This function handles PendSVC exception. + * @param None + * @retval None + */ +void PendSV_Handler(void) +{ +} + +/** + * @brief This function handles SysTick Handler. + * @param None + * @retval None + */ +void SysTick_Handler(void) +{ + HAL_IncTick(); +} + +/******************************************************************************/ +/* STM32F4xx Peripherals Interrupt Handlers */ +/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */ +/* available peripheral interrupt handler's name please refer to the startup */ +/* file (startup_stm32f4xx.s). */ +/******************************************************************************/ + +/** +* @brief This function handles DMA1 stream5 global interrupt. +*/ +void DMA1_Stream5_IRQHandler(void) +{ + HAL_DMA_IRQHandler(&hdma_usart_user_rx); +} + +/** +* @brief This function handles DMA2 stream2 global interrupt. +*/ +void DMA2_Stream2_IRQHandler(void) +{ + HAL_DMA_IRQHandler(&hdma_usart_mgmt_rx); +} + +/** + * @brief This function handles UART interrupt request. + * @param None + * @retval None + * @Note HAL_UART_IRQHandler will call HAL_UART_RxCpltCallback in main.c. + */ +void USART1_IRQHandler(void) +{ + HAL_UART_IRQHandler(&huart_mgmt); +} + +/** + * @brief This function handles UART interrupt request. + * @param None + * @retval None + * @Note HAL_UART_IRQHandler will call HAL_UART_RxCpltCallback in main.c. + */ +void USART2_IRQHandler(void) +{ + HAL_UART_IRQHandler(&huart_user); +} + +void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart) +{ + extern void HAL_UART1_RxCpltCallback(UART_HandleTypeDef *huart); + extern void HAL_UART2_RxCpltCallback(UART_HandleTypeDef *huart); + + if (huart->Instance == USART1) + HAL_UART1_RxCpltCallback(huart); + + else if (huart->Instance == USART2) + HAL_UART2_RxCpltCallback(huart); +} + +/** + * @brief Rx Transfer completed callbacks. + * @param huart: pointer to a UART_HandleTypeDef structure that contains + * the configuration information for the specified UART module. + * @retval None + */ +__weak void HAL_UART1_RxCpltCallback(UART_HandleTypeDef *huart) +{ + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_UART_TxCpltCallback could be implemented in the user file + */ +} + +__weak void HAL_UART2_RxCpltCallback(UART_HandleTypeDef *huart) +{ + /* NOTE: This function Should not be modified, when the callback is needed, + the HAL_UART_TxCpltCallback could be implemented in the user file + */ +} + +/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ diff --git a/projects/cli-test/cli-test.c b/projects/cli-test/cli-test.c index ed6aac3..a52dbec 100644 --- a/projects/cli-test/cli-test.c +++ b/projects/cli-test/cli-test.c @@ -98,13 +98,11 @@ main() led_off(LED_RED); led_on(LED_GREEN); - embedded_cli_loop(&cli); - - /* embedded_cli_loop returns when the user enters 'quit' or 'exit' */ - - cli_print(&cli, "Rebooting in 3 seconds"); - HAL_Delay(3000); - HAL_NVIC_SystemReset(); + while (1) { + embedded_cli_loop(&cli); + /* embedded_cli_loop returns when the user enters 'quit' or 'exit' */ + cli_print(&cli, "\nLogging out...\n"); + } /* NOT REACHED */ Error_Handler(); diff --git a/projects/cli-test/mgmt-cli.c b/projects/cli-test/mgmt-cli.c index 3b4ffe9..9488398 100644 --- a/projects/cli-test/mgmt-cli.c +++ b/projects/cli-test/mgmt-cli.c @@ -147,7 +147,8 @@ int embedded_cli_loop(struct cli_def *cli) continue; } - if (ctx.l < 0) break; + if (ctx.l < 0) + continue; /* cli_print(cli, "Process command: '%s'", ctx.cmd); */ n = cli_loop_process_cmd(cli, &ctx); |