aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--projects/board-test/keystore-perf.c4
-rw-r--r--projects/board-test/spiflash-perf.c23
-rw-r--r--projects/cli-test/mgmt-dfu.c4
-rw-r--r--projects/cli-test/mgmt-fpga.c10
-rw-r--r--projects/cli-test/mgmt-keystore.c2
-rw-r--r--projects/cli-test/mgmt-show.c2
-rw-r--r--projects/hsm/mgmt-fpga.c12
-rw-r--r--spiflash_n25q128.c323
-rw-r--r--spiflash_n25q128.h18
-rw-r--r--stm-flash.c2
-rw-r--r--stm-flash.h1
-rw-r--r--stm-fpgacfg.c18
-rw-r--r--stm-fpgacfg.h6
-rw-r--r--stm-keystore.c40
-rw-r--r--stm-keystore.h9
15 files changed, 238 insertions, 236 deletions
diff --git a/projects/board-test/keystore-perf.c b/projects/board-test/keystore-perf.c
index 75b4e3f..09528a2 100644
--- a/projects/board-test/keystore-perf.c
+++ b/projects/board-test/keystore-perf.c
@@ -64,7 +64,7 @@ static void test_erase_sector(void)
int err;
for (i = 0; i < KEYSTORE_NUM_SECTORS; ++i) {
- err = keystore_erase_sectors(i, i);
+ err = keystore_erase_sector(i);
if (err != 1) {
uart_send_string("ERROR: keystore_erase_sector returned ");
uart_send_integer(err, 0);
@@ -83,7 +83,7 @@ static void test_erase_subsector(void)
int err;
for (i = 0; i < KEYSTORE_NUM_SUBSECTORS; ++i) {
- err = keystore_erase_subsectors(i, i);
+ err = keystore_erase_subsector(i);
if (err != 1) {
uart_send_string("ERROR: keystore_erase_subsector returned ");
uart_send_integer(err, 0);
diff --git a/projects/board-test/spiflash-perf.c b/projects/board-test/spiflash-perf.c
index 1abcd7b..53f29cb 100644
--- a/projects/board-test/spiflash-perf.c
+++ b/projects/board-test/spiflash-perf.c
@@ -23,7 +23,7 @@ extern struct spiflash_ctx keystore_ctx;
static struct spiflash_ctx *ctx = &keystore_ctx;
/*
- * 1. Read the entire flash by pages, ignoring data.
+ * 1a. Read the entire flash by pages, ignoring data.
*/
static void test_read_page(void)
{
@@ -43,6 +43,26 @@ static void test_read_page(void)
}
/*
+ * 1b. Read the entire flash by subsectors, ignoring data.
+ */
+static void test_read_subsector(void)
+{
+ uint8_t read_buf[N25Q128_SUBSECTOR_SIZE];
+ uint32_t i;
+ int err;
+
+ for (i = 0; i < N25Q128_NUM_SUBSECTORS; ++i) {
+ err = n25q128_read_subsector(ctx, i, read_buf);
+ if (err != 1) {
+ uart_send_string("ERROR: n25q128_read_subsector returned ");
+ uart_send_integer(err, 0);
+ uart_send_string("\r\n");
+ break;
+ }
+ }
+}
+
+/*
* Read the flash data and verify it against a known pattern.
* It turns out that verification doesn't slow us down in any measurable
* way, because memcmp on 256 bytes is pretty inconsequential.
@@ -217,6 +237,7 @@ int main(void)
uart_send_string("Starting...\r\n");
time_check("read page ", test_read_page(), N25Q128_NUM_PAGES);
+ time_check("read subsector ", test_read_subsector(), N25Q128_NUM_SUBSECTORS);
time_check("erase subsector ", test_erase_subsector(), N25Q128_NUM_SUBSECTORS);
time_check("erase sector ", test_erase_sector(), N25Q128_NUM_SECTORS);
time_check("erase bulk ", test_erase_bulk(), 1);
diff --git a/projects/cli-test/mgmt-dfu.c b/projects/cli-test/mgmt-dfu.c
index 8f258ea..851c8ea 100644
--- a/projects/cli-test/mgmt-dfu.c
+++ b/projects/cli-test/mgmt-dfu.c
@@ -72,9 +72,7 @@ static int cmd_dfu_erase(struct cli_def *cli, const char *command, char *argv[],
{
int status;
- cli_print(cli, "Erasing flash sectors %i to %i (address %p to %p) - expect the CLI to crash now",
- stm_flash_sector_num((uint32_t) dfu_firmware),
- stm_flash_sector_num((uint32_t) dfu_firmware_end),
+ cli_print(cli, "Erasing flash address %p to %p - expect the CLI to crash now",
dfu_firmware,
dfu_firmware_end);
diff --git a/projects/cli-test/mgmt-fpga.c b/projects/cli-test/mgmt-fpga.c
index 31a6e27..b1b0973 100644
--- a/projects/cli-test/mgmt-fpga.c
+++ b/projects/cli-test/mgmt-fpga.c
@@ -47,7 +47,13 @@ static volatile uint32_t dfu_offset = 0;
-static int _flash_write_callback(uint8_t *buf, size_t len) {
+static int _flash_write_callback(uint8_t *buf, size_t len)
+{
+ if ((dfu_offset % FPGACFG_SECTOR_SIZE) == 0)
+ /* first page in sector, need to erase sector */
+ if (fpgacfg_erase_sector(dfu_offset / FPGACFG_SECTOR_SIZE) != 1)
+ return CLI_ERROR;
+
int res = fpgacfg_write_data(dfu_offset, buf, BITSTREAM_UPLOAD_CHUNK_SIZE) == 1;
dfu_offset += BITSTREAM_UPLOAD_CHUNK_SIZE;
return res;
@@ -91,7 +97,7 @@ static int cmd_fpga_bitstream_erase(struct cli_def *cli, const char *command, ch
*
* This command could be made to accept an argument indicating the whole memory should be erased.
*/
- if (! fpgacfg_erase_sectors(1)) {
+ if (fpgacfg_erase_sector(0) != 0) {
cli_print(cli, "Erasing first sector in FPGA config memory failed");
return CLI_ERROR;
}
diff --git a/projects/cli-test/mgmt-keystore.c b/projects/cli-test/mgmt-keystore.c
index 457abc2..09d512e 100644
--- a/projects/cli-test/mgmt-keystore.c
+++ b/projects/cli-test/mgmt-keystore.c
@@ -334,7 +334,7 @@ static int cmd_keystore_erase(struct cli_def *cli, const char *command, char *ar
}
cli_print(cli, "OK, erasing keystore, this might take a while...");
- if ((status = keystore_erase_sectors(0, KEYSTORE_NUM_SECTORS - 1)) != 1) {
+ if ((status = keystore_erase_bulk()) != 1) {
cli_print(cli, "Failed erasing token keystore: %i", status);
return CLI_ERROR;
}
diff --git a/projects/cli-test/mgmt-show.c b/projects/cli-test/mgmt-show.c
index 5cca8b7..f124830 100644
--- a/projects/cli-test/mgmt-show.c
+++ b/projects/cli-test/mgmt-show.c
@@ -132,7 +132,7 @@ static int cmd_show_keystore_data(struct cli_def *cli, const char *command, char
}
} else {
cli_print(cli, "Erasing first sector since all the first 8 bytes are tombstones");
- if ((i = keystore_erase_sectors(1, 1)) != 1) {
+ if ((i = keystore_erase_sector(0)) != 1) {
cli_print(cli, "Failed erasing the first sector: %li", i);
return CLI_ERROR;
}
diff --git a/projects/hsm/mgmt-fpga.c b/projects/hsm/mgmt-fpga.c
index d76315e..06f2a26 100644
--- a/projects/hsm/mgmt-fpga.c
+++ b/projects/hsm/mgmt-fpga.c
@@ -3,7 +3,7 @@
* -----------
* CLI code to manage the FPGA configuration etc.
*
- * Copyright (c) 2016, NORDUnet A/S All rights reserved.
+ * Copyright (c) 2016-2017, NORDUnet A/S All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
@@ -55,7 +55,13 @@ extern hal_user_t user;
static volatile uint32_t dfu_offset = 0;
-static int _flash_write_callback(uint8_t *buf, size_t len) {
+static int _flash_write_callback(uint8_t *buf, size_t len)
+{
+ if ((dfu_offset % FPGACFG_SECTOR_SIZE) == 0)
+ /* first page in sector, need to erase sector */
+ if (fpgacfg_erase_sector(dfu_offset / FPGACFG_SECTOR_SIZE) != 1)
+ return CLI_ERROR;
+
int res = fpgacfg_write_data(dfu_offset, buf, BITSTREAM_UPLOAD_CHUNK_SIZE) == 1;
dfu_offset += BITSTREAM_UPLOAD_CHUNK_SIZE;
return res;
@@ -104,7 +110,7 @@ static int cmd_fpga_bitstream_erase(struct cli_def *cli, const char *command, ch
*
* This command could be made to accept an argument indicating the whole memory should be erased.
*/
- if (! fpgacfg_erase_sectors(1)) {
+ if (fpgacfg_erase_sector(0) != 0) {
cli_print(cli, "Erasing first sector in FPGA config memory failed");
return CLI_ERROR;
}
diff --git a/spiflash_n25q128.c b/spiflash_n25q128.c
index 133ecb4..5c4a3b2 100644
--- a/spiflash_n25q128.c
+++ b/spiflash_n25q128.c
@@ -37,91 +37,129 @@
#include "spiflash_n25q128.h"
-#define _n25q128_select(ctx) HAL_GPIO_WritePin(ctx->cs_n_port, ctx->cs_n_pin, GPIO_PIN_RESET);
-#define _n25q128_deselect(ctx) HAL_GPIO_WritePin(ctx->cs_n_port, ctx->cs_n_pin, GPIO_PIN_SET);
-
-
#define N25Q128_NUM_BYTES (N25Q128_PAGE_SIZE * N25Q128_NUM_PAGES)
#if N25Q128_SECTOR_SIZE * N25Q128_NUM_SECTORS != N25Q128_NUM_BYTES || \
N25Q128_SUBSECTOR_SIZE * N25Q128_NUM_SUBSECTORS != N25Q128_NUM_BYTES
-#error Inconsistant definitions for pages / sectors / subsectors
+#error Inconsistent definitions for pages / sectors / subsectors
#endif
-static int _n25q128_get_wel_flag(struct spiflash_ctx *ctx);
-static int _wait_while_wip(struct spiflash_ctx *ctx, uint32_t timeout);
+static inline void _n25q128_select(struct spiflash_ctx *ctx)
+{
+ HAL_GPIO_WritePin(ctx->cs_n_port, ctx->cs_n_pin, GPIO_PIN_RESET);
+}
+static inline void _n25q128_deselect(struct spiflash_ctx *ctx)
+{
+ HAL_GPIO_WritePin(ctx->cs_n_port, ctx->cs_n_pin, GPIO_PIN_SET);
+}
-int n25q128_check_id(struct spiflash_ctx *ctx)
+/* Read a bit from the status register. */
+static inline int _n25q128_get_status_bit(struct spiflash_ctx *ctx, unsigned bitnum)
{
// tx, rx buffers
- uint8_t spi_tx[4];
- uint8_t spi_rx[4];
+ uint8_t spi_tx[2];
+ uint8_t spi_rx[2];
// result
HAL_StatusTypeDef ok;
- // send READ ID command
- spi_tx[0] = N25Q128_COMMAND_READ_ID;
+ //assert(bitnum < sizeof(uint8_t));
- // select, send command & read response, deselect
+ // send READ STATUS command
+ spi_tx[0] = N25Q128_COMMAND_READ_STATUS;
+
+ // send command, read response, deselect
_n25q128_select(ctx);
- ok = HAL_SPI_TransmitReceive(ctx->hspi, spi_tx, spi_rx, 4, N25Q128_SPI_TIMEOUT);
+ ok = HAL_SPI_TransmitReceive(ctx->hspi, spi_tx, spi_rx, 2, N25Q128_SPI_TIMEOUT);
_n25q128_deselect(ctx);
// check
- if (ok != HAL_OK) return 0;
-
- // parse response (note, that the very first byte was received during the
- // transfer of the command byte, so it contains garbage and should
- // be ignored here)
- if (spi_rx[1] != N25Q128_ID_MANUFACTURER) return 0;
- if (spi_rx[2] != N25Q128_ID_DEVICE_TYPE) return 0;
- if (spi_rx[3] != N25Q128_ID_DEVICE_CAPACITY) return 0;
+ if (ok != HAL_OK) return -1;
// done
- return 1;
+ return ((spi_rx[1] >> bitnum) & 1);
}
+/* Read the Write Enable Latch bit in the status register. */
+static inline int _n25q128_get_wel_flag(struct spiflash_ctx *ctx)
+{
+ return _n25q128_get_status_bit(ctx, 1);
+}
+
+/* Read the Write In Progress bit in the status register. */
+static inline int _n25q128_get_wip_flag(struct spiflash_ctx *ctx)
+{
+ return _n25q128_get_status_bit(ctx, 0);
+}
-int n25q128_read_page(struct spiflash_ctx *ctx, uint32_t page_offset, uint8_t *page_buffer)
+/* Wait until the flash memory is done writing */
+static int _n25q128_wait_while_wip(struct spiflash_ctx *ctx, uint32_t timeout)
+{
+ uint32_t tick_end = HAL_GetTick() + timeout;
+ int i;
+
+ do {
+ i = _n25q128_get_wip_flag(ctx);
+ if (i < 0) return 0;
+ if (! i) return 1;
+ } while (HAL_GetTick() < tick_end);
+
+ return 0;
+}
+
+/* Send the Write Enable command */
+static int _n25q128_write_enable(struct spiflash_ctx *ctx)
{
// tx buffer
- uint8_t spi_tx[4];
+ uint8_t spi_tx[1];
// result
HAL_StatusTypeDef ok;
- // check offset
- if (page_offset >= N25Q128_NUM_PAGES) return 0;
-
- // calculate byte address
- page_offset *= N25Q128_PAGE_SIZE;
-
- // prepare READ command
- spi_tx[0] = N25Q128_COMMAND_READ_PAGE;
- spi_tx[1] = (uint8_t)(page_offset >> 16);
- spi_tx[2] = (uint8_t)(page_offset >> 8);
- spi_tx[3] = (uint8_t)(page_offset >> 0);
+ // enable writing
+ spi_tx[0] = N25Q128_COMMAND_WRITE_ENABLE;
- // activate, send command
+ // activate, send command, deselect
_n25q128_select(ctx);
- ok = HAL_SPI_Transmit(ctx->hspi, spi_tx, 4, N25Q128_SPI_TIMEOUT);
+ ok = HAL_SPI_Transmit(ctx->hspi, spi_tx, 1, N25Q128_SPI_TIMEOUT);
+ _n25q128_deselect(ctx);
// check
- if (ok != HAL_OK) {
- _n25q128_deselect(ctx);
- return 0;
- }
+ if (ok != HAL_OK) return -1;
- // read response, deselect
- ok = HAL_SPI_Receive(ctx->hspi, page_buffer, N25Q128_PAGE_SIZE, N25Q128_SPI_TIMEOUT);
+ // make sure, that write enable did the job
+ return _n25q128_get_wel_flag(ctx);
+}
+
+int n25q128_check_id(struct spiflash_ctx *ctx)
+{
+ // tx, rx buffers
+ uint8_t spi_tx[4];
+ uint8_t spi_rx[4];
+
+ // result
+ HAL_StatusTypeDef ok;
+
+ // send READ ID command
+ spi_tx[0] = N25Q128_COMMAND_READ_ID;
+
+ // select, send command & read response, deselect
+ _n25q128_select(ctx);
+ ok = HAL_SPI_TransmitReceive(ctx->hspi, spi_tx, spi_rx, 4, N25Q128_SPI_TIMEOUT);
_n25q128_deselect(ctx);
// check
if (ok != HAL_OK) return 0;
+ // parse response (note, that the very first byte was received during the
+ // transfer of the command byte, so it contains garbage and should
+ // be ignored here)
+ if (spi_rx[1] != N25Q128_ID_MANUFACTURER) return 0;
+ if (spi_rx[2] != N25Q128_ID_DEVICE_TYPE) return 0;
+ if (spi_rx[3] != N25Q128_ID_DEVICE_CAPACITY) return 0;
+
// done
return 1;
}
@@ -139,28 +177,16 @@ int n25q128_write_page(struct spiflash_ctx *ctx, uint32_t page_offset, const uin
if (page_offset >= N25Q128_NUM_PAGES) return 0;
// enable writing
- spi_tx[0] = N25Q128_COMMAND_WRITE_ENABLE;
-
- // activate, send command, deselect
- _n25q128_select(ctx);
- ok = HAL_SPI_Transmit(ctx->hspi, spi_tx, 1, N25Q128_SPI_TIMEOUT);
- _n25q128_deselect(ctx);
-
- // check
- if (ok != HAL_OK) return 0;
-
- // make sure, that write enable did the job
- int wel = _n25q128_get_wel_flag(ctx);
- if (wel != 1) return 0;
+ if (_n25q128_write_enable(ctx) != 1) return 0;
// calculate byte address
- page_offset *= N25Q128_PAGE_SIZE;
+ uint32_t byte_offset = page_offset * N25Q128_PAGE_SIZE;
// prepare PROGRAM PAGE command
spi_tx[0] = N25Q128_COMMAND_PAGE_PROGRAM;
- spi_tx[1] = (uint8_t)(page_offset >> 16);
- spi_tx[2] = (uint8_t)(page_offset >> 8);
- spi_tx[3] = (uint8_t)(page_offset >> 0);
+ spi_tx[1] = (uint8_t)(byte_offset >> 16);
+ spi_tx[2] = (uint8_t)(byte_offset >> 8);
+ spi_tx[3] = (uint8_t)(byte_offset >> 0);
// activate, send command
_n25q128_select(ctx);
@@ -180,52 +206,13 @@ int n25q128_write_page(struct spiflash_ctx *ctx, uint32_t page_offset, const uin
if (ok != HAL_OK) return 0;
// wait until write finishes
- if (! _wait_while_wip(ctx, 1000)) return 0;
+ if (! _n25q128_wait_while_wip(ctx, 1000)) return 0;
// done
return 1;
}
-static int n25q128_get_wip_flag(struct spiflash_ctx *ctx)
-{
- // tx, rx buffers
- uint8_t spi_tx[2];
- uint8_t spi_rx[2];
-
- // result
- HAL_StatusTypeDef ok;
-
- // send READ STATUS command
- spi_tx[0] = N25Q128_COMMAND_READ_STATUS;
-
- // send command, read response, deselect
- _n25q128_select(ctx);
- ok = HAL_SPI_TransmitReceive(ctx->hspi, spi_tx, spi_rx, 2, N25Q128_SPI_TIMEOUT);
- _n25q128_deselect(ctx);
-
- // check
- if (ok != HAL_OK) return -1;
-
- // done
- return (spi_rx[1] & 1);
-}
-
-/* Wait until the flash memory is done writing (wip = Write In Progress) */
-static int _wait_while_wip(struct spiflash_ctx *ctx, uint32_t timeout)
-{
- uint32_t tick_end = HAL_GetTick() + timeout;
- int i;
-
- do {
- i = n25q128_get_wip_flag(ctx);
- if (i < 0) return 0;
- if (! i) return 1;
- } while (HAL_GetTick() < tick_end);
-
- return 0;
-}
-
static int n25q128_erase_something(struct spiflash_ctx *ctx, uint8_t command, uint32_t byte_offset)
{
// check offset
@@ -238,19 +225,7 @@ static int n25q128_erase_something(struct spiflash_ctx *ctx, uint8_t command, ui
HAL_StatusTypeDef ok;
// enable writing
- spi_tx[0] = N25Q128_COMMAND_WRITE_ENABLE;
-
- // select, send command, deselect
- _n25q128_select(ctx);
- ok = HAL_SPI_Transmit(ctx->hspi, spi_tx, 1, N25Q128_SPI_TIMEOUT);
- _n25q128_deselect(ctx);
-
- // check
- if (ok != HAL_OK) return 0;
-
- // make sure, that write enable did the job
- int wel = _n25q128_get_wel_flag(ctx);
- if (wel != 1) return 0;
+ if (_n25q128_write_enable(ctx) != 1) return 0;
// send command (ERASE SECTOR or ERASE SUBSECTOR)
spi_tx[0] = command;
@@ -268,7 +243,7 @@ static int n25q128_erase_something(struct spiflash_ctx *ctx, uint8_t command, ui
// wait for erase to finish
- if (! _wait_while_wip(ctx, 1000)) return 0;
+ if (! _n25q128_wait_while_wip(ctx, 1000)) return 0;
// done
return 1;
@@ -298,19 +273,7 @@ int n25q128_erase_bulk(struct spiflash_ctx *ctx)
HAL_StatusTypeDef ok;
// enable writing
- spi_tx[0] = N25Q128_COMMAND_WRITE_ENABLE;
-
- // select, send command, deselect
- _n25q128_select(ctx);
- ok = HAL_SPI_Transmit(ctx->hspi, spi_tx, 1, N25Q128_SPI_TIMEOUT);
- _n25q128_deselect(ctx);
-
- // check
- if (ok != HAL_OK) return 0;
-
- // make sure, that write enable did the job
- int wel = _n25q128_get_wel_flag(ctx);
- if (wel != 1) return 0;
+ if (_n25q128_write_enable(ctx) != 1) return 0;
// send command
spi_tx[0] = N25Q128_COMMAND_ERASE_BULK;
@@ -325,41 +288,13 @@ int n25q128_erase_bulk(struct spiflash_ctx *ctx)
// wait for erase to finish
- if (! _wait_while_wip(ctx, 60000)) return 0;
+ if (! _n25q128_wait_while_wip(ctx, 60000)) return 0;
// done
return 1;
}
-/*
- * Read the Write Enable Latch bit in the status register.
- */
-static int _n25q128_get_wel_flag(struct spiflash_ctx *ctx)
-{
- // tx, rx buffers
- uint8_t spi_tx[2];
- uint8_t spi_rx[2];
-
- // result
- HAL_StatusTypeDef ok;
-
- // send READ STATUS command
- spi_tx[0] = N25Q128_COMMAND_READ_STATUS;
-
- // send command, read response, deselect
- _n25q128_select(ctx);
- ok = HAL_SPI_TransmitReceive(ctx->hspi, spi_tx, spi_rx, 2, N25Q128_SPI_TIMEOUT);
- _n25q128_deselect(ctx);
-
- // check
- if (ok != HAL_OK) return -1;
-
- // done
- return ((spi_rx[1] >> 1) & 1);
-}
-
-
/* This function writes of a number of pages to the flash memory.
* The caller is responsible for ensuring that the pages have been erased.
*/
@@ -367,7 +302,24 @@ int n25q128_write_data(struct spiflash_ctx *ctx, uint32_t offset, const uint8_t
{
uint32_t page;
- /* Ensure alignment */
+ /*
+ * The data sheet says:
+ * If the bits of the least significant address, which is the starting
+ * address, are not all zero, all data transmitted beyond the end of the
+ * current page is programmed from the starting address of the same page.
+ * If the number of bytes sent to the device exceed the maximum page size,
+ * previously latched data is discarded and only the last maximum
+ * page-size number of data bytes are guaranteed to be programmed
+ * correctly within the same page. If the number of bytes sent to the
+ * device is less than the maximum page size, they are correctly
+ * programmed at the specified addresses without any effect on the other
+ * bytes of the same page.
+ *
+ * This is sufficiently confusing that it makes sense to constrain the API
+ * to page alignment in address and length, because that's how we're using
+ * it anyway.
+ */
+
if ((offset % N25Q128_PAGE_SIZE) != 0) return -1;
if ((len % N25Q128_PAGE_SIZE) != 0) return -2;
@@ -377,10 +329,6 @@ int n25q128_write_data(struct spiflash_ctx *ctx, uint32_t offset, const uint8_t
}
buf += N25Q128_PAGE_SIZE;
offset += N25Q128_PAGE_SIZE;
-
- /* XXX read back data and verify it, or maybe just verify ability to write
- * to memory by verifying the contents of one page after erase?
- */
}
return 1;
@@ -389,19 +337,50 @@ int n25q128_write_data(struct spiflash_ctx *ctx, uint32_t offset, const uint8_t
/* This function reads zero or more pages from the SPI flash. */
int n25q128_read_data(struct spiflash_ctx *ctx, uint32_t offset, uint8_t *buf, const uint32_t len)
{
- uint32_t page;
+ // tx buffer
+ uint8_t spi_tx[4];
- /* Ensure alignment */
- if ((offset % N25Q128_PAGE_SIZE) != 0) return -1;
- if ((len % N25Q128_PAGE_SIZE) != 0) return -2;
+ // result
+ HAL_StatusTypeDef ok;
- for (page = 0; page < len / N25Q128_PAGE_SIZE; page++) {
- if (! n25q128_read_page(ctx, offset / N25Q128_PAGE_SIZE, buf)) {
- return -3;
- }
- buf += N25Q128_PAGE_SIZE;
- offset += N25Q128_PAGE_SIZE;
+ /*
+ * The data sheet says:
+ * The addressed byte can be at any location, and the address
+ * automatically increments to the next address after each byte of data is
+ * shifted out; therefore, the entire memory can be read with a single
+ * command. The operation is terminated by driving S# [chip select] HIGH
+ * at any time during data output.
+ *
+ * We're only going to call this with page-aligned address and length, but
+ * we're not going to enforce it here.
+ */
+
+ // avoid overflow
+ if (offset + len > N25Q128_NUM_BYTES) return -3;
+
+ // prepare READ command
+ spi_tx[0] = N25Q128_COMMAND_READ;
+ spi_tx[1] = (uint8_t)(offset >> 16);
+ spi_tx[2] = (uint8_t)(offset >> 8);
+ spi_tx[3] = (uint8_t)(offset >> 0);
+
+ // activate, send command
+ _n25q128_select(ctx);
+ ok = HAL_SPI_Transmit(ctx->hspi, spi_tx, 4, N25Q128_SPI_TIMEOUT);
+
+ // check
+ if (ok != HAL_OK) {
+ _n25q128_deselect(ctx);
+ return 0;
}
+ // read response, deselect
+ ok = HAL_SPI_Receive(ctx->hspi, buf, len, N25Q128_SPI_TIMEOUT);
+ _n25q128_deselect(ctx);
+
+ // check
+ if (ok != HAL_OK) return 0;
+
+ // done
return 1;
}
diff --git a/spiflash_n25q128.h b/spiflash_n25q128.h
index ff14c34..50243bd 100644
--- a/spiflash_n25q128.h
+++ b/spiflash_n25q128.h
@@ -6,7 +6,7 @@
* The Alpha board has two of these SPI flash memorys, the FPGA config memory
* and the keystore memory.
*
- * Copyright (c) 2016, NORDUnet A/S All rights reserved.
+ * Copyright (c) 2016-2017, NORDUnet A/S All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
@@ -40,9 +40,9 @@
#include "stm32f4xx_hal.h"
-#define N25Q128_COMMAND_READ_ID 0x9E
-#define N25Q128_COMMAND_READ_PAGE 0x03
+#define N25Q128_COMMAND_READ 0x03
#define N25Q128_COMMAND_READ_STATUS 0x05
+#define N25Q128_COMMAND_READ_ID 0x9E
#define N25Q128_COMMAND_WRITE_ENABLE 0x06
#define N25Q128_COMMAND_ERASE_SECTOR 0xD8
#define N25Q128_COMMAND_ERASE_SUBSECTOR 0x20
@@ -71,12 +71,16 @@ struct spiflash_ctx {
};
extern int n25q128_check_id(struct spiflash_ctx *ctx);
-extern int n25q128_read_page(struct spiflash_ctx *ctx, uint32_t page_offset, uint8_t *page_buffer);
+extern int n25q128_read_data(struct spiflash_ctx *ctx, uint32_t offset, uint8_t *buf, const uint32_t len);
extern int n25q128_write_page(struct spiflash_ctx *ctx, uint32_t page_offset, const uint8_t *page_buffer);
-extern int n25q128_erase_sector(struct spiflash_ctx *ctx, uint32_t sector_offset);
+extern int n25q128_write_data(struct spiflash_ctx *ctx, uint32_t offset, const uint8_t *buf, const uint32_t len);
extern int n25q128_erase_subsector(struct spiflash_ctx *ctx, uint32_t subsector_offset);
+extern int n25q128_erase_sector(struct spiflash_ctx *ctx, uint32_t sector_offset);
extern int n25q128_erase_bulk(struct spiflash_ctx *ctx);
-extern int n25q128_write_data(struct spiflash_ctx *ctx, uint32_t offset, const uint8_t *buf, const uint32_t len);
-extern int n25q128_read_data(struct spiflash_ctx *ctx, uint32_t offset, uint8_t *buf, const uint32_t len);
+#define n25q128_read_page(ctx, page_offset, page_buffer) \
+ n25q128_read_data(ctx, page_offset * N25Q128_PAGE_SIZE, page_buffer, N25Q128_PAGE_SIZE)
+#define n25q128_read_subsector(ctx, subsector_offset, subsector_buffer) \
+ n25q128_read_data(ctx, subsector_offset * N25Q128_SUBSECTOR_SIZE, subsector_buffer, N25Q128_SUBSECTOR_SIZE)
+
#endif /* __STM32_SPIFLASH_N25Q128_H */
diff --git a/stm-flash.c b/stm-flash.c
index fc79ea0..4456f44 100644
--- a/stm-flash.c
+++ b/stm-flash.c
@@ -70,7 +70,7 @@ uint32_t flash_sector_offsets[FLASH_NUM_SECTORS + 1] = {
0x08200000 /* first address *after* flash */
};
-int stm_flash_sector_num(const uint32_t offset)
+static int stm_flash_sector_num(const uint32_t offset)
{
int i;
diff --git a/stm-flash.h b/stm-flash.h
index a9cf7db..aecb87f 100644
--- a/stm-flash.h
+++ b/stm-flash.h
@@ -35,7 +35,6 @@
#ifndef __STM32_FLASH_H
#define __STM32_FLASH_H
-extern int stm_flash_sector_num(const uint32_t offset);
extern int stm_flash_erase_sectors(const uint32_t start_offset, const uint32_t end_offset);
extern int stm_flash_write32(const uint32_t offset, const uint32_t *buf, const uint32_t elements);
diff --git a/stm-fpgacfg.c b/stm-fpgacfg.c
index 16c490b..10abc57 100644
--- a/stm-fpgacfg.c
+++ b/stm-fpgacfg.c
@@ -4,7 +4,7 @@
* Functions for accessing the FPGA config memory and controlling
* the low-level status of the FPGA (reset registers/reboot etc.).
*
- * Copyright (c) 2016, NORDUnet A/S All rights reserved.
+ * Copyright (c) 2016-2017, NORDUnet A/S All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
@@ -48,11 +48,6 @@ int fpgacfg_check_id()
int fpgacfg_write_data(uint32_t offset, const uint8_t *buf, const uint32_t len)
{
- if ((offset % N25Q128_SECTOR_SIZE) == 0)
- // first page in sector, need to erase sector
- if (! n25q128_erase_sector(&fpgacfg_ctx, offset / N25Q128_SECTOR_SIZE))
- return -4;
-
return n25q128_write_data(&fpgacfg_ctx, offset, buf, len);
}
@@ -97,14 +92,7 @@ int fpgacfg_check_done(void)
return (status == GPIO_PIN_SET);
}
-int fpgacfg_erase_sectors(int num)
+int fpgacfg_erase_sector(uint32_t sector_offset)
{
- if (num > N25Q128_NUM_SECTORS || num < 0) num = N25Q128_NUM_SECTORS;
- while (num) {
- if (! n25q128_erase_sector(&fpgacfg_ctx, num - 1)) {
- return -1;
- }
- num--;
- }
- return 1;
+ return n25q128_erase_sector(&fpgacfg_ctx, sector_offset);
}
diff --git a/stm-fpgacfg.h b/stm-fpgacfg.h
index 0d5eeb9..9baebc4 100644
--- a/stm-fpgacfg.h
+++ b/stm-fpgacfg.h
@@ -4,7 +4,7 @@
* Functions and defines for accessing the FPGA config memory and controlling
* the low-level status of the FPGA (reset registers/reboot etc.).
*
- * Copyright (c) 2016, NORDUnet A/S All rights reserved.
+ * Copyright (c) 2016-2017, NORDUnet A/S All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
@@ -39,6 +39,8 @@
#include "stm32f4xx_hal.h"
#include "spiflash_n25q128.h"
+#define FPGACFG_SECTOR_SIZE N25Q128_SECTOR_SIZE
+
/* Pins connected to the FPGA config memory (SPI flash) */
#define PROM_FPGA_DIS_Pin GPIO_PIN_14
#define PROM_FPGA_DIS_GPIO_Port GPIOI
@@ -87,7 +89,7 @@ extern SPI_HandleTypeDef hspi_fpgacfg;
extern int fpgacfg_check_id(void);
extern int fpgacfg_write_data(uint32_t offset, const uint8_t *buf, const uint32_t len);
-extern int fpgacfg_erase_sectors(int num);
+extern int fpgacfg_erase_sector(uint32_t sector_offset);
extern void fpgacfg_access_control(enum fpgacfg_access_ctrl access);
/* Reset the FPGA */
extern void fpgacfg_reset_fpga(enum fpgacfg_reset reset);
diff --git a/stm-keystore.c b/stm-keystore.c
index 86fad91..b941489 100644
--- a/stm-keystore.c
+++ b/stm-keystore.c
@@ -3,7 +3,7 @@
* ----------
* Functions for accessing the keystore memory.
*
- * Copyright (c) 2016, NORDUnet A/S All rights reserved.
+ * Copyright (c) 2016-2017, NORDUnet A/S All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
@@ -55,35 +55,31 @@ int keystore_write_data(uint32_t offset, const uint8_t *buf, const uint32_t len)
return n25q128_write_data(&keystore_ctx, offset, buf, len);
}
-static int keystore_erase_something(uint32_t start, uint32_t stop, uint32_t limit,
- int (*eraser)(struct spiflash_ctx *, uint32_t))
+int keystore_erase_subsector(uint32_t subsector_offset)
{
- uint32_t something;
-
- if (start > limit) return -2;
- if (stop > limit || stop < start) return -3;
-
- for (something = start; something <= stop; something++) {
- if (! eraser(&keystore_ctx, something)) {
- return -1;
- }
- }
- return 1;
+ return n25q128_erase_subsector(&keystore_ctx, subsector_offset);
}
-int keystore_erase_sectors(uint32_t start, uint32_t stop)
+int keystore_erase_sector(uint32_t sector_offset)
{
- return keystore_erase_something(start, stop, N25Q128_NUM_SECTORS,
- n25q128_erase_sector);
+ return n25q128_erase_sector(&keystore_ctx, sector_offset);
}
-int keystore_erase_subsectors(uint32_t start, uint32_t stop)
+int keystore_erase_bulk(void)
{
- return keystore_erase_something(start, stop, N25Q128_NUM_SUBSECTORS,
- n25q128_erase_subsector);
+ return n25q128_erase_bulk(&keystore_ctx);
}
-int keystore_erase_bulk(void)
+/*
+ * Deprecated, will be removed when we fix libhal/ks_flash.c to use the
+ * new function. I love inter-dependent repos.
+ */
+
+int keystore_erase_subsectors(uint32_t start, uint32_t stop)
{
- return n25q128_erase_bulk(&keystore_ctx);
+ for (int i = start; i <= stop; ++i) {
+ if (keystore_erase_subsector(i) != 1)
+ return 0;
+ }
+ return 1;
}
diff --git a/stm-keystore.h b/stm-keystore.h
index f27687a..419e12e 100644
--- a/stm-keystore.h
+++ b/stm-keystore.h
@@ -3,7 +3,7 @@
* ---------
* Functions and defines for accessing the keystore memory.
*
- * Copyright (c) 2016, NORDUnet A/S All rights reserved.
+ * Copyright (c) 2016-2017, NORDUnet A/S All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
@@ -60,8 +60,11 @@ extern SPI_HandleTypeDef hspi_keystore;
extern int keystore_check_id(void);
extern int keystore_read_data(uint32_t offset, uint8_t *buf, const uint32_t len);
extern int keystore_write_data(uint32_t offset, const uint8_t *buf, const uint32_t len);
-extern int keystore_erase_sectors(uint32_t start, uint32_t stop);
-extern int keystore_erase_subsectors(uint32_t start, uint32_t stop);
+extern int keystore_erase_subsector(uint32_t subsector_offset);
+extern int keystore_erase_sector(uint32_t sector_offset);
extern int keystore_erase_bulk(void);
+/* Deprecated, will be removed. */
+extern int keystore_erase_subsectors(uint32_t start, uint32_t stop);
+
#endif /* __STM32_KEYSTORE_H */