diff options
-rw-r--r-- | .gitignore | 6 | ||||
-rw-r--r-- | .gitmodules | 6 | ||||
-rw-r--r-- | Drivers/.gitignore | 1 | ||||
-rw-r--r-- | Makefile | 31 | ||||
-rw-r--r-- | hal_io_fmc.c | 200 | ||||
m--------- | libhal | 0 | ||||
m--------- | thirdparty/libtfm | 0 |
7 files changed, 237 insertions, 7 deletions
diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..890e4fe --- /dev/null +++ b/.gitignore @@ -0,0 +1,6 @@ +*.o +*.bin +*.elf +*.hex +*.lst +*.map diff --git a/.gitmodules b/.gitmodules new file mode 100644 index 0000000..cb803f8 --- /dev/null +++ b/.gitmodules @@ -0,0 +1,6 @@ +[submodule "libhal"] + path = libhal + url = git@git.cryptech.is:sw/libhal.git +[submodule "thirdparty/libtfm"] + path = thirdparty/libtfm + url = git@git.cryptech.is:sw/thirdparty/libtfm.git diff --git a/Drivers/.gitignore b/Drivers/.gitignore new file mode 100644 index 0000000..b3ef86c --- /dev/null +++ b/Drivers/.gitignore @@ -0,0 +1 @@ +*.[ao] @@ -28,11 +28,13 @@ SRCS += $(TOPLEVEL)/Device/system_stm32f4xx.c ################################################### -CC=arm-none-eabi-gcc -AS=arm-none-eabi-as -OBJCOPY=arm-none-eabi-objcopy -OBJDUMP=arm-none-eabi-objdump -SIZE=arm-none-eabi-size +PREFIX=arm-none-eabi- +export CC=$(PREFIX)gcc +export AS=$(PREFIX)as +export AR=$(PREFIX)ar +export OBJCOPY=$(PREFIX)objcopy +export OBJDUMP=$(PREFIX)objdump +export SIZE=$(PREFIX)size CFLAGS = -ggdb -O2 -Wall -Wextra -Warray-bounds CFLAGS += -mcpu=cortex-m4 -mthumb -mlittle-endian -mthumb-interwork @@ -53,13 +55,26 @@ OBJS = $(patsubst %.s,%.o, $(patsubst %.c,%.o, $(SRCS))) ################################################### -.PHONY: lib proj +.PHONY: libstmf4 proj libhal libtfm lib + +LIBS = libstmf4 libtfm libhal all: lib proj -lib: +init: + git submodule update --init --recursive + +lib: $(LIBS) + +libstmf4: $(MAKE) -C $(STD_PERIPH_LIB) STDPERIPH_SETTINGS="$(STDPERIPH_SETTINGS) -I $(PWD)/include" +libtfm: + ${MAKE} -C thirdparty/libtfm PREFIX=$(PREFIX) + +libhal: hal_io_fmc.o + ${MAKE} -C libhal IO_OBJ=../hal_io_fmc.o libhal.a + proj: $(PROJS:=.elf) %.elf: %.o $(OBJS) @@ -80,3 +95,5 @@ clean: distclean: clean $(MAKE) -C $(STD_PERIPH_LIB) clean + $(MAKE) -C thirdparty/libtfm clean + $(MAKE) -C libhal clean diff --git a/hal_io_fmc.c b/hal_io_fmc.c new file mode 100644 index 0000000..cce7e06 --- /dev/null +++ b/hal_io_fmc.c @@ -0,0 +1,200 @@ +/* + * hal_io_fmc.c + * ------------ + * This module contains common code to talk to the FPGA over the FMC bus. + * + * Author: Paul Selkirk + * Copyright (c) 2014-2015, NORDUnet A/S All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * - Redistributions of source code must retain the above copyright notice, + * this list of conditions and the following disclaimer. + * + * - Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * - Neither the name of the NORDUnet nor the names of its contributors may + * be used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS + * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED + * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A + * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED + * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR + * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF + * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING + * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS + * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#include <stdio.h> +#include <stdint.h> + +#include "stm-fmc.h" +#include "libhal/hal.h" + +static int debug = 0; +static int inited = 0; + +#ifndef FMC_IO_TIMEOUT +#define FMC_IO_TIMEOUT 100000000 +#endif + +static hal_error_t init(void) +{ + if (!inited) { + fmc_init(); + inited = 1; + } + return HAL_OK; +} + +/* Translate cryptech register number to FMC address. + * This is a lot simpler than EIM, just shift the register number. + */ +static off_t fmc_offset(off_t offset) +{ + return (offset << 2); +} + +void hal_io_set_debug(int onoff) +{ + debug = onoff; +} + +static void dump(char *label, const uint8_t *buf, size_t len) +{ + if (debug) { + size_t i; + printf("%s [", label); + for (i = 0; i < len; ++i) + printf(" %02x", buf[i]); + printf(" ]\n"); + } +} + +hal_error_t hal_io_write(off_t offset, const uint8_t *buf, size_t len) +{ + hal_error_t err; + + if (len % 4 != 0) + return HAL_ERROR_IO_BAD_COUNT; + + if ((err = init()) != HAL_OK) + return err; + + dump("write ", buf, len); + + offset = fmc_offset(offset); + for (; len > 0; offset += 4, buf += 4, len -= 4) { + uint32_t val; + val = *(uint32_t *)buf; + fmc_write_32(offset, &val); + } + + return HAL_OK; +} + +hal_error_t hal_io_read(off_t offset, uint8_t *buf, size_t len) +{ + uint8_t *rbuf = buf; + int rlen = len; + hal_error_t err; + + if (len % 4 != 0) + return HAL_ERROR_IO_BAD_COUNT; + + if ((err = init()) != HAL_OK) + return err; + + offset = fmc_offset(offset); + for (; rlen > 0; offset += 4, rbuf += 4, rlen -= 4) { + uint32_t val; + fmc_read_32(offset, &val); + *(uint32_t *)rbuf = val; + } + + dump("read ", buf, len); + + return HAL_OK; +} + +hal_error_t hal_io_expected(off_t offset, const uint8_t *expected, size_t len) +{ + hal_error_t err; + uint8_t buf[4]; + size_t i; + + if (len % 4 != 0) + return HAL_ERROR_IO_BAD_COUNT; + + dump("expect", expected, len); + + for (i = 0; i < len; i++) { + if ((i & 3) == 0 && (err = hal_io_read(offset + i/4, buf, sizeof(buf))) != HAL_OK) + return err; + if (buf[i & 3] != expected[i]) + return HAL_ERROR_IO_UNEXPECTED; + } + + return HAL_OK; +} + +hal_error_t hal_io_init(off_t offset) +{ + uint8_t buf[4] = { 0, 0, 0, CTRL_INIT }; + return hal_io_write(offset, buf, sizeof(buf)); +} + +hal_error_t hal_io_next(off_t offset) +{ + uint8_t buf[4] = { 0, 0, 0, CTRL_NEXT }; + return hal_io_write(offset, buf, sizeof(buf)); +} + +hal_error_t hal_io_wait(off_t offset, uint8_t status, int *count) +{ + hal_error_t err; + uint8_t buf[4]; + int i; + + for (i = 1; ; ++i) { + + if (count && (*count > 0) && (i >= *count)) + return HAL_ERROR_IO_TIMEOUT; + + if ((err = hal_io_read(offset, buf, sizeof(buf))) != HAL_OK) + return err; + + if ((buf[3] & status) != 0) { + if (count) + *count = i; + return HAL_OK; + } + } +} + +hal_error_t hal_io_wait_ready(off_t offset) +{ + int limit = FMC_IO_TIMEOUT; + return hal_io_wait(offset, STATUS_READY, &limit); +} + +hal_error_t hal_io_wait_valid(off_t offset) +{ + int limit = FMC_IO_TIMEOUT; + return hal_io_wait(offset, STATUS_VALID, &limit); +} + +/* + * Local variables: + * indent-tabs-mode: nil + * c-basic-offset: 2 + * End: + */ diff --git a/libhal b/libhal new file mode 160000 +Subproject 60cce0124f2fc3eddca03ed3950da9238247a61 diff --git a/thirdparty/libtfm b/thirdparty/libtfm new file mode 160000 +Subproject e2eab1093a134e5a655d1ccad23a31b2b8252c6 |