aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Makefile3
-rw-r--r--libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_it.c169
-rw-r--r--projects/cli-test/cli-test.c21
-rw-r--r--projects/cli-test/mgmt-cli.c60
-rw-r--r--projects/cli-test/mgmt-cli.h4
-rw-r--r--projects/hsm/main.c7
-rw-r--r--stm-uart.c24
7 files changed, 260 insertions, 28 deletions
diff --git a/Makefile b/Makefile
index e2159ed..1f4ca74 100644
--- a/Makefile
+++ b/Makefile
@@ -63,7 +63,8 @@ export BOARD_OBJS = \
$(TOPLEVEL)/syscalls.o \
$(BOARD_DIR)/TOOLCHAIN_GCC_ARM/startup_stm32f429xx.o \
$(BOARD_DIR)/system_stm32f4xx.o \
- $(BOARD_DIR)/stm32f4xx_hal_msp.o
+ $(BOARD_DIR)/stm32f4xx_hal_msp.o \
+ $(BOARD_DIR)/stm32f4xx_it.o
# cross-building tools
PREFIX=arm-none-eabi-
diff --git a/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_it.c b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_it.c
new file mode 100644
index 0000000..a174d73
--- /dev/null
+++ b/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F4/TARGET_CRYPTECH_ALPHA/stm32f4xx_it.c
@@ -0,0 +1,169 @@
+/**
+******************************************************************************
+* @file GPIO/GPIO_IOToggle/Src/stm32f4xx_it.c
+* @author MCD Application Team
+* @version V1.0.1
+* @date 26-February-2014
+* @brief Main Interrupt Service Routines.
+* This file provides template for all exceptions handler and
+* peripherals interrupt service routine.
+******************************************************************************
+* @attention
+*
+* <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
+*
+* Redistribution and use in source and binary forms, with or without modification,
+* are permitted provided that the following conditions are met:
+* 1. Redistributions of source code must retain the above copyright notice,
+* this list of conditions and the following disclaimer.
+* 2. Redistributions in binary form must reproduce the above copyright notice,
+* this list of conditions and the following disclaimer in the documentation
+* and/or other materials provided with the distribution.
+* 3. Neither the name of STMicroelectronics nor the names of its contributors
+* may be used to endorse or promote products derived from this software
+* without specific prior written permission.
+*
+* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*
+******************************************************************************
+*/
+
+#include "stm-init.h"
+#include "stm-uart.h"
+
+/******************************************************************************/
+/* Cortex-M4 Processor Exceptions Handlers */
+/******************************************************************************/
+
+/**
+ * @brief This function handles NMI exception.
+ * @param None
+ * @retval None
+ */
+void NMI_Handler(void)
+{
+}
+
+/**
+ * @brief This function handles Hard Fault exception.
+ * @param None
+ * @retval None
+ */
+void HardFault_Handler(void)
+{
+ /* Go to infinite loop when Hard Fault exception occurs */
+ while (1) { ; }
+}
+
+/**
+ * @brief This function handles Memory Manage exception.
+ * @param None
+ * @retval None
+ */
+void MemManage_Handler(void)
+{
+ /* Go to infinite loop when Memory Manage exception occurs */
+ while (1) { ; }
+}
+
+/**
+ * @brief This function handles Bus Fault exception.
+ * @param None
+ * @retval None
+ */
+void BusFault_Handler(void)
+{
+ /* Go to infinite loop when Bus Fault exception occurs */
+ while (1) { ; }
+}
+
+/**
+ * @brief This function handles Usage Fault exception.
+ * @param None
+ * @retval None
+ */
+void UsageFault_Handler(void)
+{
+ /* Go to infinite loop when Usage Fault exception occurs */
+ while (1) { ; }
+}
+
+
+#if 0 /* already defined in libraries/mbed/rtos/ */
+/**
+ * @brief This function handles SVCall exception.
+ * @param None
+ * @retval None
+ */
+void SVC_Handler(void)
+{
+}
+
+/**
+ * @brief This function handles Debug Monitor exception.
+ * @param None
+ * @retval None
+ */
+void DebugMon_Handler(void)
+{
+}
+
+/**
+ * @brief This function handles PendSVC exception.
+ * @param None
+ * @retval None
+ */
+void PendSV_Handler(void)
+{
+}
+
+/**
+ * @brief This function handles SysTick Handler.
+ * @param None
+ * @retval None
+ */
+void SysTick_Handler(void)
+{
+ HAL_IncTick();
+}
+#endif
+
+/******************************************************************************/
+/* STM32F4xx Peripherals Interrupt Handlers */
+/* Add here the Interrupt Handler for the used peripheral(s) (PPP), for the */
+/* available peripheral interrupt handler's name please refer to the startup */
+/* file (startup_stm32f4xx.s). */
+/******************************************************************************/
+
+/**
+ * @brief This function handles UART interrupt request.
+ * @param None
+ * @retval None
+ * @Note HAL_UART_IRQHandler will call HAL_UART_TxCpltCallback in main.c.
+ */
+void USART1_IRQHandler(void)
+{
+ HAL_UART_IRQHandler(&huart_mgmt);
+}
+
+/**
+ * @brief This function handles UART interrupt request.
+ * @param None
+ * @retval None
+ * @Note HAL_UART_IRQHandler will call HAL_UART_TxCpltCallback in main.c.
+ */
+void USART2_IRQHandler(void)
+{
+ HAL_UART_IRQHandler(&huart_user);
+}
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
diff --git a/projects/cli-test/cli-test.c b/projects/cli-test/cli-test.c
index 26ebbc2..b90d0dd 100644
--- a/projects/cli-test/cli-test.c
+++ b/projects/cli-test/cli-test.c
@@ -49,6 +49,9 @@
extern uint32_t update_crc(uint32_t crc, uint8_t *buf, int len);
+/* MGMT UART interrupt receive buffer (data will be put in a larger ring buffer) */
+volatile uint8_t uart_rx;
+
int cmd_show_cpuspeed(struct cli_def *cli, const char *command, char *argv[], int argc)
{
@@ -286,6 +289,22 @@ void do_early_dfu_jump(void)
while (1);
}
+/* Callback for HAL_UART_Receive_IT(). */
+void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
+{
+ if (huart->Instance == huart_mgmt.Instance) {
+ mgmt_cli_uart_isr((const uint8_t *) &uart_rx, 1);
+
+ /* Set things up to receive another byte. */
+ HAL_UART_Receive_IT(huart, (uint8_t *) &uart_rx, 1);
+ }
+}
+
+void HAL_UART_ErrorCallback(UART_HandleTypeDef *huart)
+{
+ led_on(LED_RED);
+ led_on(LED_YELLOW);
+}
int
main()
@@ -318,7 +337,7 @@ main()
/* embedded_cli_loop returns when the user enters 'quit' or 'exit' */
- cli_print(&cli, "Rebooting in 4 seconds");
+ cli_print(&cli, "Rebooting in 3 seconds");
HAL_Delay(3000);
HAL_NVIC_SystemReset();
diff --git a/projects/cli-test/mgmt-cli.c b/projects/cli-test/mgmt-cli.c
index 46faae8..abbd999 100644
--- a/projects/cli-test/mgmt-cli.c
+++ b/projects/cli-test/mgmt-cli.c
@@ -33,10 +33,27 @@
*/
#include "stm-init.h"
#include "stm-uart.h"
+#include "stm-led.h"
#include "mgmt-cli.h"
#include <string.h>
+extern uint8_t uart_rx;
+
+struct uart_ringbuf_t {
+ uint32_t enabled, ridx, widx, overflow;
+ uint8_t buf[CLI_UART_RECVBUF_SIZE];
+};
+
+volatile struct uart_ringbuf_t uart_ringbuf = {1, 0, 0, 0, {0}};
+
+#define RINGBUF_RIDX(rb) (rb.ridx & CLI_UART_RECVBUF_MASK)
+#define RINGBUF_WIDX(rb) (rb.widx & CLI_UART_RECVBUF_MASK)
+#define RINGBUF_COUNT(rb) ((unsigned)(rb.widx - rb.ridx))
+#define RINGBUF_FULL(rb) (RINGBUF_RIDX(rb) == ((rb.widx + 1) & CLI_UART_RECVBUF_MASK))
+#define RINGBUF_READ(rb, dst) {dst = rb.buf[RINGBUF_RIDX(rb)]; rb.buf[RINGBUF_RIDX(rb)] = '.'; rb.ridx++;}
+#define RINGBUF_WRITE(rb, src) {rb.buf[RINGBUF_WIDX(rb)] = src; rb.widx++;}
+
void uart_cli_print(struct cli_def *cli __attribute__ ((unused)), const char *buf)
{
char crlf[] = "\r\n";
@@ -46,8 +63,23 @@ void uart_cli_print(struct cli_def *cli __attribute__ ((unused)), const char *bu
int uart_cli_read(struct cli_def *cli __attribute__ ((unused)), void *buf, size_t count)
{
- if (uart_recv_char2(STM_UART_MGMT, buf, count) != HAL_OK) {
- return -1;
+ uint32_t timeout = 0xffffff;
+
+ /* Always explicitly enable the RX interrupt when we get here.
+ * Prevents us getting stuck waiting for an interrupt that will never come.
+ */
+ __HAL_UART_FLUSH_DRREGISTER(&huart_mgmt);
+ HAL_UART_Receive_IT(&huart_mgmt, (uint8_t *) &uart_rx, 1);
+
+ while (count && timeout--) {
+ if (RINGBUF_COUNT(uart_ringbuf)) {
+ RINGBUF_READ(uart_ringbuf, *(uint8_t *) buf);
+ buf++;
+ count--;
+ } else {
+ led_toggle(LED_GREEN);
+ HAL_Delay(10);
+ }
}
return 1;
}
@@ -83,7 +115,11 @@ int embedded_cli_loop(struct cli_def *cli)
n = cli_loop_read_next_char(cli, &ctx, &c);
- //cli_print(cli, "Next char: '%c' (n == %i)", c, n);
+ /*
+ cli_print(cli, "Next char: '%c'/%i, ringbuf ridx %i, widx %i (%i/%i) - count %i",
+ c, (int) c, uart_ringbuf.ridx, uart_ringbuf.widx, RINGBUF_RIDX(uart_ringbuf),
+ RINGBUF_WIDX(uart_ringbuf), RINGBUF_COUNT(uart_ringbuf));
+ */
if (n == CLI_LOOP_CTRL_BREAK)
break;
if (n == CLI_LOOP_CTRL_CONTINUE)
@@ -98,7 +134,7 @@ int embedded_cli_loop(struct cli_def *cli)
if (ctx.l < 0) break;
- //cli_print(cli, "Process command: '%s'", ctx.cmd);
+ /* cli_print(cli, "Process command: '%s'", ctx.cmd); */
n = cli_loop_process_cmd(cli, &ctx);
if (n == CLI_LOOP_CTRL_BREAK)
break;
@@ -107,6 +143,22 @@ int embedded_cli_loop(struct cli_def *cli)
return CLI_OK;
}
+/* Interrupt service routine to be called when data has been received on the MGMT UART. */
+void mgmt_cli_uart_isr(const uint8_t *buf, size_t count)
+{
+ if (! uart_ringbuf.enabled) return;
+
+ while (count) {
+ if (RINGBUF_FULL(uart_ringbuf)) {
+ uart_ringbuf.overflow++;
+ return;
+ }
+ RINGBUF_WRITE(uart_ringbuf, *buf);
+ buf++;
+ count--;
+ }
+}
+
void mgmt_cli_init(struct cli_def *cli)
{
cli_init(cli);
diff --git a/projects/cli-test/mgmt-cli.h b/projects/cli-test/mgmt-cli.h
index dd6a58b..3b7f503 100644
--- a/projects/cli-test/mgmt-cli.h
+++ b/projects/cli-test/mgmt-cli.h
@@ -68,10 +68,14 @@
cli_register_command2(cli, &cmd_##name##_s, NULL)
+#define CLI_UART_RECVBUF_SIZE 256 /* This must be a power of 2 */
+#define CLI_UART_RECVBUF_MASK (CLI_UART_RECVBUF_SIZE - 1)
+
extern void uart_cli_print(struct cli_def *cli __attribute__ ((unused)), const char *buf);
extern int uart_cli_read(struct cli_def *cli __attribute__ ((unused)), void *buf, size_t count);
extern int uart_cli_write(struct cli_def *cli __attribute__ ((unused)), const void *buf, size_t count);
extern int embedded_cli_loop(struct cli_def *cli);
extern void mgmt_cli_init(struct cli_def *cli);
+extern void mgmt_cli_uart_isr(const uint8_t *buf, size_t count);
#endif /* __STM32_MGMT_CLI_H */
diff --git a/projects/hsm/main.c b/projects/hsm/main.c
index ed93aed..2508f07 100644
--- a/projects/hsm/main.c
+++ b/projects/hsm/main.c
@@ -198,13 +198,6 @@ void HAL_UART_RxCpltCallback(UART_HandleTypeDef *huart)
HAL_UART_Receive_IT(huart, &c, 1);
}
-/* UART interrupt handler. This eventually calls HAL_UART_RxCpltCallback.
- */
-void USART2_IRQHandler(void)
-{
- HAL_UART_IRQHandler(&huart_user);
-}
-
/* The main thread. After the system setup, it waits for the RPC-request
* semaphore from HAL_UART_RxCpltCallback, and spawns a dispatch thread.
*/
diff --git a/stm-uart.c b/stm-uart.c
index 297718d..2f3aabe 100644
--- a/stm-uart.c
+++ b/stm-uart.c
@@ -62,12 +62,7 @@ HAL_StatusTypeDef uart_send_char(uint8_t ch)
HAL_StatusTypeDef uart_send_char2(enum stm_uart_port port, uint8_t ch)
{
- UART_HandleTypeDef *uart = _which_uart(port);
-
- if (uart)
- return HAL_UART_Transmit(uart, &ch, 1, 0x1);
-
- return HAL_ERROR;
+ return uart_send_bytes(port, &ch, 1);
}
/* receive a single character */
@@ -96,21 +91,21 @@ HAL_StatusTypeDef uart_send_string(char *s)
/* send a string */
HAL_StatusTypeDef uart_send_string2(enum stm_uart_port port, const char *s)
{
- UART_HandleTypeDef *uart = _which_uart(port);
-
- if (uart)
- return HAL_UART_Transmit(uart, (uint8_t *) s, strlen(s), 0x1);
-
- return HAL_ERROR;
+ return uart_send_bytes(port, (uint8_t *) s, strlen(s));
}
/* send raw bytes */
HAL_StatusTypeDef uart_send_bytes(enum stm_uart_port port, uint8_t *buf, size_t len)
{
+ uint32_t timeout = 100;
UART_HandleTypeDef *uart = _which_uart(port);
- if (uart)
+ if (uart) {
+ while (HAL_UART_GetState(uart) != HAL_UART_STATE_READY && timeout--) { ; }
+ if (! timeout) return HAL_ERROR;
+
return HAL_UART_Transmit(uart, (uint8_t *) buf, (uint32_t) len, 0x1);
+ }
return HAL_ERROR;
}
@@ -139,7 +134,6 @@ HAL_StatusTypeDef uart_send_number2(enum stm_uart_port port, uint32_t num, uint8
#define BUFSIZE 32
char buf[BUFSIZE];
char *where = buf + BUFSIZE;
- UART_HandleTypeDef *uart = _which_uart(port);
/* initialize buf so we can add leading 0 by adjusting the pointer */
memset(buf, '0', BUFSIZE);
@@ -163,7 +157,7 @@ HAL_StatusTypeDef uart_send_number2(enum stm_uart_port port, uint32_t num, uint8
/* number is larger than the specified number of digits */
digits = buf + BUFSIZE - where;
- return HAL_UART_Transmit(uart, (uint8_t *) where, digits, 0x1);
+ return uart_send_bytes(port, (uint8_t *) where, digits);
}
HAL_StatusTypeDef uart_send_hexdump(enum stm_uart_port port, const uint8_t *buf,