import mbed rtos library

1 files changed, 0 insertions, 143 deletions

diff --git a/stm32f4xx_hal_msp.c b/stm32f4xx_hal_msp.c
deleted file mode 100644
index ee2cb7e..0000000
--- a/stm32f4xx_hal_msp.c
+++ /dev/null
@@ -1,143 +0,0 @@
-/**
-******************************************************************************
-* File Name          : stm32f4xx_hal_msp.c
-* Description        : This file provides code for the MSP Initialization
-*                      and de-Initialization codes.
-******************************************************************************
-*
-* COPYRIGHT(c) 2015 STMicroelectronics
-*
-* Redistribution and use in source and binary forms, with or without modification,
-* are permitted provided that the following conditions are met:
-*   1. Redistributions of source code must retain the above copyright notice,
-*      this list of conditions and the following disclaimer.
-*   2. Redistributions in binary form must reproduce the above copyright notice,
-*      this list of conditions and the following disclaimer in the documentation
-*      and/or other materials provided with the distribution.
-*   3. Neither the name of STMicroelectronics nor the names of its contributors
-*      may be used to endorse or promote products derived from this software
-*      without specific prior written permission.
-*
-* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
-* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
-* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
-* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
-* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
-* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-*
-******************************************************************************
-*/
-/* Includes ------------------------------------------------------------------*/
-#include "stm32f4xx_hal.h"
-
-/* USER CODE BEGIN 0 */
-
-/* USER CODE END 0 */
-
-/**
- * Initializes the Global MSP.
- */
-void HAL_MspInit(void)
-{
-  /* USER CODE BEGIN MspInit 0 */
-
-  /* USER CODE END MspInit 0 */
-
-  HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_4);
-
-  /* System interrupt init*/
-  /* SysTick_IRQn interrupt configuration */
-  HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
-
-  /* USER CODE BEGIN MspInit 1 */
-
-  /* USER CODE END MspInit 1 */
-}
-
-void HAL_RNG_MspInit(RNG_HandleTypeDef* hrng)
-{
-
-  if(hrng->Instance==RNG)
-    {
-      /* USER CODE BEGIN RNG_MspInit 0 */
-
-      /* USER CODE END RNG_MspInit 0 */
-      /* Peripheral clock enable */
-      __RNG_CLK_ENABLE();
-      /* USER CODE BEGIN RNG_MspInit 1 */
-
-      /* USER CODE END RNG_MspInit 1 */
-    }
-
-}
-
-void HAL_RNG_MspDeInit(RNG_HandleTypeDef* hrng)
-{
-
-  if(hrng->Instance==RNG)
-    {
-      /* USER CODE BEGIN RNG_MspDeInit 0 */
-
-      /* USER CODE END RNG_MspDeInit 0 */
-      /* Peripheral clock disable */
-      __RNG_CLK_DISABLE();
-    }
-  /* USER CODE BEGIN RNG_MspDeInit 1 */
-
-  /* USER CODE END RNG_MspDeInit 1 */
-
-}
-
-
-
-void HAL_SRAM_MspInit(SRAM_HandleTypeDef* hsram)
-{
-}
-
-
-void HAL_SRAM_MspDeInit(SRAM_HandleTypeDef* hsram)
-{
-}
-
-void HAL_UART_MspInit(UART_HandleTypeDef* huart)
-{
-  GPIO_InitTypeDef GPIO_InitStruct;
-
-  if (huart->Instance == USART2) {
-    /* Peripheral clock enable */
-    __USART2_CLK_ENABLE();
-    __GPIOA_CLK_ENABLE();
-
-    /**USART2 GPIO Configuration
-       PA2     ------> USART2_TX
-       PA3     ------> USART2_RX
-    */
-    GPIO_InitStruct.Pin = GPIO_PIN_2 | GPIO_PIN_3;
-    GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
-    GPIO_InitStruct.Pull = GPIO_PULLUP;
-    GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
-    GPIO_InitStruct.Alternate = GPIO_AF7_USART2;
-    HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
-  }
-
-}
-
-void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
-{
-  if (huart->Instance == USART2) {
-    /* Peripheral clock disable */
-    __USART2_CLK_DISABLE();
-
-    /**USART2 GPIO Configuration
-       PA2     ------> USART2_TX
-       PA3     ------> USART2_RX
-    */
-    HAL_GPIO_DeInit(GPIOA, GPIO_PIN_2 | GPIO_PIN_3);
-  }
-}
-
-/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/