Based on user/ft/stm32-dev-bridge, without the project-specific build

directories (and duplicated code).

3 files changed, 1334 insertions, 0 deletions

diff --git a/Device/ldscripts/stm32f429bitx.ld b/Device/ldscripts/stm32f429bitx.ld
new file mode 100644
index 0000000..fd428f4
--- /dev/null
+++ b/Device/ldscripts/stm32f429bitx.ld
@@ -0,0 +1,186 @@
+/*

+*****************************************************************************

+**

+**  File        : stm32_flash.ld

+**

+**  Abstract    : Linker script for STM32F429BI Device with

+**                2048KByte FLASH, 192KByte RAM

+**

+**                Set heap size, stack size and stack location according

+**                to application requirements.

+**

+**                Set memory bank area and size if external memory is used.

+**

+**  Target      : STMicroelectronics STM32

+**

+**  Environment : Atollic TrueSTUDIO(R)

+**

+**  Distribution: The file is distributed “as is,” without any warranty

+**                of any kind.

+**

+**  (c)Copyright Atollic AB.

+**  You may use this file as-is or modify it according to the needs of your

+**  project. This file may only be built (assembled or compiled and linked)

+**  using the Atollic TrueSTUDIO(R) product. The use of this file together

+**  with other tools than Atollic TrueSTUDIO(R) is not permitted.

+**

+*****************************************************************************

+*/

+

+/* Entry Point */

+ENTRY(Reset_Handler)

+

+/* Highest address of the user mode stack */

+_estack = 0x2002FFFF;    /* end of RAM */

+

+/* Generate a link error if heap and stack don't fit into RAM */

+_Min_Heap_Size = 0;      /* required amount of heap  */

+_Min_Stack_Size = 0x400; /* required amount of stack */

+

+/* Specify the memory areas */

+MEMORY

+{

+FLASH (rx)      : ORIGIN = 0x8000000, LENGTH = 2048K

+RAM (xrw)      : ORIGIN = 0x20000000, LENGTH = 192K

+CCMRAM (rw)      : ORIGIN = 0x10000000, LENGTH = 64K

+}

+

+/* Define output sections */

+SECTIONS

+{

+  /* The startup code goes first into FLASH */

+  .isr_vector :

+  {

+    . = ALIGN(4);

+    KEEP(*(.isr_vector)) /* Startup code */

+    . = ALIGN(4);

+  } >FLASH

+

+  /* The program code and other data goes into FLASH */

+  .text :

+  {

+    . = ALIGN(4);

+    *(.text)           /* .text sections (code) */

+    *(.text*)          /* .text* sections (code) */

+    *(.glue_7)         /* glue arm to thumb code */

+    *(.glue_7t)        /* glue thumb to arm code */

+    *(.eh_frame)

+

+    KEEP (*(.init))

+    KEEP (*(.fini))

+

+    . = ALIGN(4);

+    _etext = .;        /* define a global symbols at end of code */

+  } >FLASH

+

+  /* Constant data goes into FLASH */

+  .rodata :

+  {

+    . = ALIGN(4);

+    *(.rodata)         /* .rodata sections (constants, strings, etc.) */

+    *(.rodata*)        /* .rodata* sections (constants, strings, etc.) */

+    . = ALIGN(4);

+  } >FLASH

+

+  .ARM.extab   : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH

+  .ARM : {

+    __exidx_start = .;

+    *(.ARM.exidx*)

+    __exidx_end = .;

+  } >FLASH

+

+  .preinit_array     :

+  {

+    PROVIDE_HIDDEN (__preinit_array_start = .);

+    KEEP (*(.preinit_array*))

+    PROVIDE_HIDDEN (__preinit_array_end = .);

+  } >FLASH

+  .init_array :

+  {

+    PROVIDE_HIDDEN (__init_array_start = .);

+    KEEP (*(SORT(.init_array.*)))

+    KEEP (*(.init_array*))

+    PROVIDE_HIDDEN (__init_array_end = .);

+  } >FLASH

+  .fini_array :

+  {

+    PROVIDE_HIDDEN (__fini_array_start = .);

+    KEEP (*(SORT(.fini_array.*)))

+    KEEP (*(.fini_array*))

+    PROVIDE_HIDDEN (__fini_array_end = .);

+  } >FLASH

+

+  /* used by the startup to initialize data */

+  _sidata = LOADADDR(.data);

+

+  /* Initialized data sections goes into RAM, load LMA copy after code */

+  .data : 

+  {

+    . = ALIGN(4);

+    _sdata = .;        /* create a global symbol at data start */

+    *(.data)           /* .data sections */

+    *(.data*)          /* .data* sections */

+

+    . = ALIGN(4);

+    _edata = .;        /* define a global symbol at data end */

+  } >RAM AT> FLASH

+

+  _siccmram = LOADADDR(.ccmram);

+

+  /* CCM-RAM section 

+  * 

+  * IMPORTANT NOTE! 

+  * If initialized variables will be placed in this section, 

+  * the startup code needs to be modified to copy the init-values.  

+  */

+  .ccmram :

+  {

+    . = ALIGN(4);

+    _sccmram = .;       /* create a global symbol at ccmram start */

+    *(.ccmram)

+    *(.ccmram*)

+    

+    . = ALIGN(4);

+    _eccmram = .;       /* create a global symbol at ccmram end */

+  } >CCMRAM AT> FLASH

+

+  

+  /* Uninitialized data section */

+  . = ALIGN(4);

+  .bss :

+  {

+    /* This is used by the startup in order to initialize the .bss secion */

+    _sbss = .;         /* define a global symbol at bss start */

+    __bss_start__ = _sbss;

+    *(.bss)

+    *(.bss*)

+    *(COMMON)

+

+    . = ALIGN(4);

+    _ebss = .;         /* define a global symbol at bss end */

+    __bss_end__ = _ebss;

+  } >RAM

+

+  /* User_heap_stack section, used to check that there is enough RAM left */

+  ._user_heap_stack :

+  {

+    . = ALIGN(4);

+    PROVIDE ( end = . );

+    PROVIDE ( _end = . );

+    . = . + _Min_Heap_Size;

+    . = . + _Min_Stack_Size;

+    . = ALIGN(4);

+  } >RAM

+

+  

+

+  /* Remove information from the standard libraries */

+  /DISCARD/ :

+  {

+    libc.a ( * )

+    libm.a ( * )

+    libgcc.a ( * )

+  }

+

+  .ARM.attributes 0 : { *(.ARM.attributes) }

+}

diff --git a/Device/startup_stm32f429xx.s b/Device/startup_stm32f429xx.s
new file mode 100644
index 0000000..f8ba161
--- /dev/null
+++ b/Device/startup_stm32f429xx.s
@@ -0,0 +1,561 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f429xx.s
+  * @author    MCD Application Team
+  * @version   V2.3.2
+  * @date      26-June-2015
+  * @brief     STM32F429xx Devices vector table for Atollic TrueSTUDIO toolchain.
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M4 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+  .syntax unified
+  .cpu cortex-m4
+  .fpu softvfp
+  .thumb
+
+.global  g_pfnVectors
+.global  Default_Handler
+
+/* start address for the initialization values of the .data section.
+defined in linker script */
+.word  _sidata
+/* start address for the .data section. defined in linker script */
+.word  _sdata
+/* end address for the .data section. defined in linker script */
+.word  _edata
+/* start address for the .bss section. defined in linker script */
+.word  _sbss
+/* end address for the .bss section. defined in linker script */
+.word  _ebss
+/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
+
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called.
+ * @param  None
+ * @retval : None
+*/
+
+    .section  .text.Reset_Handler
+  .weak  Reset_Handler
+  .type  Reset_Handler, %function
+Reset_Handler:
+  ldr   sp, =_estack       /* set stack pointer */
+
+/* Copy the data segment initializers from flash to SRAM */
+  movs  r1, #0
+  b  LoopCopyDataInit
+
+CopyDataInit:
+  ldr  r3, =_sidata
+  ldr  r3, [r3, r1]
+  str  r3, [r0, r1]
+  adds  r1, r1, #4
+
+LoopCopyDataInit:
+  ldr  r0, =_sdata
+  ldr  r3, =_edata
+  adds  r2, r0, r1
+  cmp  r2, r3
+  bcc  CopyDataInit
+  ldr  r2, =_sbss
+  b  LoopFillZerobss
+/* Zero fill the bss segment. */
+FillZerobss:
+  movs  r3, #0
+  str  r3, [r2], #4
+
+LoopFillZerobss:
+  ldr  r3, = _ebss
+  cmp  r2, r3
+  bcc  FillZerobss
+
+/* Call the clock system intitialization function.*/
+  bl  SystemInit
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl  main
+  bx  lr
+.size  Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None
+ * @retval None
+*/
+    .section  .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b  Infinite_Loop
+  .size  Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+*
+*******************************************************************************/
+   .section  .isr_vector,"a",%progbits
+  .type  g_pfnVectors, %object
+  .size  g_pfnVectors, .-g_pfnVectors
+
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  MemManage_Handler
+  .word  BusFault_Handler
+  .word  UsageFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  DebugMon_Handler
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+
+  /* External Interrupts */
+  .word     WWDG_IRQHandler                   /* Window WatchDog              */
+  .word     PVD_IRQHandler                    /* PVD through EXTI Line detection */
+  .word     TAMP_STAMP_IRQHandler             /* Tamper and TimeStamps through the EXTI line */
+  .word     RTC_WKUP_IRQHandler               /* RTC Wakeup through the EXTI line */
+  .word     FLASH_IRQHandler                  /* FLASH                        */
+  .word     RCC_IRQHandler                    /* RCC                          */
+  .word     EXTI0_IRQHandler                  /* EXTI Line0                   */
+  .word     EXTI1_IRQHandler                  /* EXTI Line1                   */
+  .word     EXTI2_IRQHandler                  /* EXTI Line2                   */
+  .word     EXTI3_IRQHandler                  /* EXTI Line3                   */
+  .word     EXTI4_IRQHandler                  /* EXTI Line4                   */
+  .word     DMA1_Stream0_IRQHandler           /* DMA1 Stream 0                */
+  .word     DMA1_Stream1_IRQHandler           /* DMA1 Stream 1                */
+  .word     DMA1_Stream2_IRQHandler           /* DMA1 Stream 2                */
+  .word     DMA1_Stream3_IRQHandler           /* DMA1 Stream 3                */
+  .word     DMA1_Stream4_IRQHandler           /* DMA1 Stream 4                */
+  .word     DMA1_Stream5_IRQHandler           /* DMA1 Stream 5                */
+  .word     DMA1_Stream6_IRQHandler           /* DMA1 Stream 6                */
+  .word     ADC_IRQHandler                    /* ADC1, ADC2 and ADC3s         */
+  .word     CAN1_TX_IRQHandler                /* CAN1 TX                      */
+  .word     CAN1_RX0_IRQHandler               /* CAN1 RX0                     */
+  .word     CAN1_RX1_IRQHandler               /* CAN1 RX1                     */
+  .word     CAN1_SCE_IRQHandler               /* CAN1 SCE                     */
+  .word     EXTI9_5_IRQHandler                /* External Line[9:5]s          */
+  .word     TIM1_BRK_TIM9_IRQHandler          /* TIM1 Break and TIM9          */
+  .word     TIM1_UP_TIM10_IRQHandler          /* TIM1 Update and TIM10        */
+  .word     TIM1_TRG_COM_TIM11_IRQHandler     /* TIM1 Trigger and Commutation and TIM11 */
+  .word     TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */
+  .word     TIM2_IRQHandler                   /* TIM2                         */
+  .word     TIM3_IRQHandler                   /* TIM3                         */
+  .word     TIM4_IRQHandler                   /* TIM4                         */
+  .word     I2C1_EV_IRQHandler                /* I2C1 Event                   */
+  .word     I2C1_ER_IRQHandler                /* I2C1 Error                   */
+  .word     I2C2_EV_IRQHandler                /* I2C2 Event                   */
+  .word     I2C2_ER_IRQHandler                /* I2C2 Error                   */
+  .word     SPI1_IRQHandler                   /* SPI1                         */
+  .word     SPI2_IRQHandler                   /* SPI2                         */
+  .word     USART1_IRQHandler                 /* USART1                       */
+  .word     USART2_IRQHandler                 /* USART2                       */
+  .word     USART3_IRQHandler                 /* USART3                       */
+  .word     EXTI15_10_IRQHandler              /* External Line[15:10]s        */
+  .word     RTC_Alarm_IRQHandler              /* RTC Alarm (A and B) through EXTI Line */
+  .word     OTG_FS_WKUP_IRQHandler            /* USB OTG FS Wakeup through EXTI line */
+  .word     TIM8_BRK_TIM12_IRQHandler         /* TIM8 Break and TIM12         */
+  .word     TIM8_UP_TIM13_IRQHandler          /* TIM8 Update and TIM13        */
+  .word     TIM8_TRG_COM_TIM14_IRQHandler     /* TIM8 Trigger and Commutation and TIM14 */
+  .word     TIM8_CC_IRQHandler                /* TIM8 Capture Compare         */
+  .word     DMA1_Stream7_IRQHandler           /* DMA1 Stream7                 */
+  .word     FMC_IRQHandler                    /* FMC                         */
+  .word     SDIO_IRQHandler                   /* SDIO                         */
+  .word     TIM5_IRQHandler                   /* TIM5                         */
+  .word     SPI3_IRQHandler                   /* SPI3                         */
+  .word     UART4_IRQHandler                  /* UART4                        */
+  .word     UART5_IRQHandler                  /* UART5                        */
+  .word     TIM6_DAC_IRQHandler               /* TIM6 and DAC1&2 underrun errors */
+  .word     TIM7_IRQHandler                   /* TIM7                         */
+  .word     DMA2_Stream0_IRQHandler           /* DMA2 Stream 0                */
+  .word     DMA2_Stream1_IRQHandler           /* DMA2 Stream 1                */
+  .word     DMA2_Stream2_IRQHandler           /* DMA2 Stream 2                */
+  .word     DMA2_Stream3_IRQHandler           /* DMA2 Stream 3                */
+  .word     DMA2_Stream4_IRQHandler           /* DMA2 Stream 4                */
+  .word     ETH_IRQHandler                    /* Ethernet                     */
+  .word     ETH_WKUP_IRQHandler               /* Ethernet Wakeup through EXTI line */
+  .word     CAN2_TX_IRQHandler                /* CAN2 TX                      */
+  .word     CAN2_RX0_IRQHandler               /* CAN2 RX0                     */
+  .word     CAN2_RX1_IRQHandler               /* CAN2 RX1                     */
+  .word     CAN2_SCE_IRQHandler               /* CAN2 SCE                     */
+  .word     OTG_FS_IRQHandler                 /* USB OTG FS                   */
+  .word     DMA2_Stream5_IRQHandler           /* DMA2 Stream 5                */
+  .word     DMA2_Stream6_IRQHandler           /* DMA2 Stream 6                */
+  .word     DMA2_Stream7_IRQHandler           /* DMA2 Stream 7                */
+  .word     USART6_IRQHandler                 /* USART6                       */
+  .word     I2C3_EV_IRQHandler                /* I2C3 event                   */
+  .word     I2C3_ER_IRQHandler                /* I2C3 error                   */
+  .word     OTG_HS_EP1_OUT_IRQHandler         /* USB OTG HS End Point 1 Out   */
+  .word     OTG_HS_EP1_IN_IRQHandler          /* USB OTG HS End Point 1 In    */
+  .word     OTG_HS_WKUP_IRQHandler            /* USB OTG HS Wakeup through EXTI */
+  .word     OTG_HS_IRQHandler                 /* USB OTG HS                   */
+  .word     DCMI_IRQHandler                   /* DCMI                         */
+  .word     0                                 /* Reserved                     */
+  .word     HASH_RNG_IRQHandler               /* Hash and Rng                 */
+  .word     FPU_IRQHandler                    /* FPU                          */
+  .word     UART7_IRQHandler                  /* UART7                        */
+  .word     UART8_IRQHandler                  /* UART8                        */
+  .word     SPI4_IRQHandler                   /* SPI4                         */
+  .word     SPI5_IRQHandler                   /* SPI5 						  */
+  .word     SPI6_IRQHandler                   /* SPI6						  */
+  .word     SAI1_IRQHandler                   /* SAI1						  */
+  .word     LTDC_IRQHandler                   /* LTDC_IRQHandler			  */
+  .word     LTDC_ER_IRQHandler                /* LTDC_ER_IRQHandler			  */
+  .word     DMA2D_IRQHandler                  /* DMA2D                        */
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler.
+* As they are weak aliases, any function with the same name will override
+* this definition.
+*
+*******************************************************************************/
+   .weak      NMI_Handler
+   .thumb_set NMI_Handler,Default_Handler
+
+   .weak      HardFault_Handler
+   .thumb_set HardFault_Handler,Default_Handler
+
+   .weak      MemManage_Handler
+   .thumb_set MemManage_Handler,Default_Handler
+
+   .weak      BusFault_Handler
+   .thumb_set BusFault_Handler,Default_Handler
+
+   .weak      UsageFault_Handler
+   .thumb_set UsageFault_Handler,Default_Handler
+
+   .weak      SVC_Handler
+   .thumb_set SVC_Handler,Default_Handler
+
+   .weak      DebugMon_Handler
+   .thumb_set DebugMon_Handler,Default_Handler
+
+   .weak      PendSV_Handler
+   .thumb_set PendSV_Handler,Default_Handler
+
+   .weak      SysTick_Handler
+   .thumb_set SysTick_Handler,Default_Handler
+
+   .weak      WWDG_IRQHandler
+   .thumb_set WWDG_IRQHandler,Default_Handler
+
+   .weak      PVD_IRQHandler
+   .thumb_set PVD_IRQHandler,Default_Handler
+
+   .weak      TAMP_STAMP_IRQHandler
+   .thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+
+   .weak      RTC_WKUP_IRQHandler
+   .thumb_set RTC_WKUP_IRQHandler,Default_Handler
+
+   .weak      FLASH_IRQHandler
+   .thumb_set FLASH_IRQHandler,Default_Handler
+
+   .weak      RCC_IRQHandler
+   .thumb_set RCC_IRQHandler,Default_Handler
+
+   .weak      EXTI0_IRQHandler
+   .thumb_set EXTI0_IRQHandler,Default_Handler
+
+   .weak      EXTI1_IRQHandler
+   .thumb_set EXTI1_IRQHandler,Default_Handler
+
+   .weak      EXTI2_IRQHandler
+   .thumb_set EXTI2_IRQHandler,Default_Handler
+
+   .weak      EXTI3_IRQHandler
+   .thumb_set EXTI3_IRQHandler,Default_Handler
+
+   .weak      EXTI4_IRQHandler
+   .thumb_set EXTI4_IRQHandler,Default_Handler
+
+   .weak      DMA1_Stream0_IRQHandler
+   .thumb_set DMA1_Stream0_IRQHandler,Default_Handler
+
+   .weak      DMA1_Stream1_IRQHandler
+   .thumb_set DMA1_Stream1_IRQHandler,Default_Handler
+
+   .weak      DMA1_Stream2_IRQHandler
+   .thumb_set DMA1_Stream2_IRQHandler,Default_Handler
+
+   .weak      DMA1_Stream3_IRQHandler
+   .thumb_set DMA1_Stream3_IRQHandler,Default_Handler
+
+   .weak      DMA1_Stream4_IRQHandler
+   .thumb_set DMA1_Stream4_IRQHandler,Default_Handler
+
+   .weak      DMA1_Stream5_IRQHandler
+   .thumb_set DMA1_Stream5_IRQHandler,Default_Handler
+
+   .weak      DMA1_Stream6_IRQHandler
+   .thumb_set DMA1_Stream6_IRQHandler,Default_Handler
+
+   .weak      ADC_IRQHandler
+   .thumb_set ADC_IRQHandler,Default_Handler
+
+   .weak      CAN1_TX_IRQHandler
+   .thumb_set CAN1_TX_IRQHandler,Default_Handler
+
+   .weak      CAN1_RX0_IRQHandler
+   .thumb_set CAN1_RX0_IRQHandler,Default_Handler
+
+   .weak      CAN1_RX1_IRQHandler
+   .thumb_set CAN1_RX1_IRQHandler,Default_Handler
+
+   .weak      CAN1_SCE_IRQHandler
+   .thumb_set CAN1_SCE_IRQHandler,Default_Handler
+
+   .weak      EXTI9_5_IRQHandler
+   .thumb_set EXTI9_5_IRQHandler,Default_Handler
+
+   .weak      TIM1_BRK_TIM9_IRQHandler
+   .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
+
+   .weak      TIM1_UP_TIM10_IRQHandler
+   .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
+
+   .weak      TIM1_TRG_COM_TIM11_IRQHandler
+   .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
+
+   .weak      TIM1_CC_IRQHandler
+   .thumb_set TIM1_CC_IRQHandler,Default_Handler
+
+   .weak      TIM2_IRQHandler
+   .thumb_set TIM2_IRQHandler,Default_Handler
+
+   .weak      TIM3_IRQHandler
+   .thumb_set TIM3_IRQHandler,Default_Handler
+
+   .weak      TIM4_IRQHandler
+   .thumb_set TIM4_IRQHandler,Default_Handler
+
+   .weak      I2C1_EV_IRQHandler
+   .thumb_set I2C1_EV_IRQHandler,Default_Handler
+
+   .weak      I2C1_ER_IRQHandler
+   .thumb_set I2C1_ER_IRQHandler,Default_Handler
+
+   .weak      I2C2_EV_IRQHandler
+   .thumb_set I2C2_EV_IRQHandler,Default_Handler
+
+   .weak      I2C2_ER_IRQHandler
+   .thumb_set I2C2_ER_IRQHandler,Default_Handler
+
+   .weak      SPI1_IRQHandler
+   .thumb_set SPI1_IRQHandler,Default_Handler
+
+   .weak      SPI2_IRQHandler
+   .thumb_set SPI2_IRQHandler,Default_Handler
+
+   .weak      USART1_IRQHandler
+   .thumb_set USART1_IRQHandler,Default_Handler
+
+   .weak      USART2_IRQHandler
+   .thumb_set USART2_IRQHandler,Default_Handler
+
+   .weak      USART3_IRQHandler
+   .thumb_set USART3_IRQHandler,Default_Handler
+
+   .weak      EXTI15_10_IRQHandler
+   .thumb_set EXTI15_10_IRQHandler,Default_Handler
+
+   .weak      RTC_Alarm_IRQHandler
+   .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+
+   .weak      OTG_FS_WKUP_IRQHandler
+   .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
+
+   .weak      TIM8_BRK_TIM12_IRQHandler
+   .thumb_set TIM8_BRK_TIM12_IRQHandler,Default_Handler
+
+   .weak      TIM8_UP_TIM13_IRQHandler
+   .thumb_set TIM8_UP_TIM13_IRQHandler,Default_Handler
+
+   .weak      TIM8_TRG_COM_TIM14_IRQHandler
+   .thumb_set TIM8_TRG_COM_TIM14_IRQHandler,Default_Handler
+
+   .weak      TIM8_CC_IRQHandler
+   .thumb_set TIM8_CC_IRQHandler,Default_Handler
+
+   .weak      DMA1_Stream7_IRQHandler
+   .thumb_set DMA1_Stream7_IRQHandler,Default_Handler
+
+   .weak      FMC_IRQHandler
+   .thumb_set FMC_IRQHandler,Default_Handler
+
+   .weak      SDIO_IRQHandler
+   .thumb_set SDIO_IRQHandler,Default_Handler
+
+   .weak      TIM5_IRQHandler
+   .thumb_set TIM5_IRQHandler,Default_Handler
+
+   .weak      SPI3_IRQHandler
+   .thumb_set SPI3_IRQHandler,Default_Handler
+
+   .weak      UART4_IRQHandler
+   .thumb_set UART4_IRQHandler,Default_Handler
+
+   .weak      UART5_IRQHandler
+   .thumb_set UART5_IRQHandler,Default_Handler
+
+   .weak      TIM6_DAC_IRQHandler
+   .thumb_set TIM6_DAC_IRQHandler,Default_Handler
+
+   .weak      TIM7_IRQHandler
+   .thumb_set TIM7_IRQHandler,Default_Handler
+
+   .weak      DMA2_Stream0_IRQHandler
+   .thumb_set DMA2_Stream0_IRQHandler,Default_Handler
+
+   .weak      DMA2_Stream1_IRQHandler
+   .thumb_set DMA2_Stream1_IRQHandler,Default_Handler
+
+   .weak      DMA2_Stream2_IRQHandler
+   .thumb_set DMA2_Stream2_IRQHandler,Default_Handler
+
+   .weak      DMA2_Stream3_IRQHandler
+   .thumb_set DMA2_Stream3_IRQHandler,Default_Handler
+
+   .weak      DMA2_Stream4_IRQHandler
+   .thumb_set DMA2_Stream4_IRQHandler,Default_Handler
+
+   .weak      ETH_IRQHandler
+   .thumb_set ETH_IRQHandler,Default_Handler
+
+   .weak      ETH_WKUP_IRQHandler
+   .thumb_set ETH_WKUP_IRQHandler,Default_Handler
+
+   .weak      CAN2_TX_IRQHandler
+   .thumb_set CAN2_TX_IRQHandler,Default_Handler
+
+   .weak      CAN2_RX0_IRQHandler
+   .thumb_set CAN2_RX0_IRQHandler,Default_Handler
+
+   .weak      CAN2_RX1_IRQHandler
+   .thumb_set CAN2_RX1_IRQHandler,Default_Handler
+
+   .weak      CAN2_SCE_IRQHandler
+   .thumb_set CAN2_SCE_IRQHandler,Default_Handler
+
+   .weak      OTG_FS_IRQHandler
+   .thumb_set OTG_FS_IRQHandler,Default_Handler
+
+   .weak      DMA2_Stream5_IRQHandler
+   .thumb_set DMA2_Stream5_IRQHandler,Default_Handler
+
+   .weak      DMA2_Stream6_IRQHandler
+   .thumb_set DMA2_Stream6_IRQHandler,Default_Handler
+
+   .weak      DMA2_Stream7_IRQHandler
+   .thumb_set DMA2_Stream7_IRQHandler,Default_Handler
+
+   .weak      USART6_IRQHandler
+   .thumb_set USART6_IRQHandler,Default_Handler
+
+   .weak      I2C3_EV_IRQHandler
+   .thumb_set I2C3_EV_IRQHandler,Default_Handler
+
+   .weak      I2C3_ER_IRQHandler
+   .thumb_set I2C3_ER_IRQHandler,Default_Handler
+
+   .weak      OTG_HS_EP1_OUT_IRQHandler
+   .thumb_set OTG_HS_EP1_OUT_IRQHandler,Default_Handler
+
+   .weak      OTG_HS_EP1_IN_IRQHandler
+   .thumb_set OTG_HS_EP1_IN_IRQHandler,Default_Handler
+
+   .weak      OTG_HS_WKUP_IRQHandler
+   .thumb_set OTG_HS_WKUP_IRQHandler,Default_Handler
+
+   .weak      OTG_HS_IRQHandler
+   .thumb_set OTG_HS_IRQHandler,Default_Handler
+
+   .weak      DCMI_IRQHandler
+   .thumb_set DCMI_IRQHandler,Default_Handler
+
+   .weak      HASH_RNG_IRQHandler
+   .thumb_set HASH_RNG_IRQHandler,Default_Handler
+
+   .weak      FPU_IRQHandler
+   .thumb_set FPU_IRQHandler,Default_Handler
+
+   .weak      UART7_IRQHandler
+   .thumb_set UART7_IRQHandler,Default_Handler
+
+   .weak      UART8_IRQHandler
+   .thumb_set UART8_IRQHandler,Default_Handler
+
+   .weak      SPI4_IRQHandler
+   .thumb_set SPI4_IRQHandler,Default_Handler
+
+   .weak      SPI5_IRQHandler
+   .thumb_set SPI5_IRQHandler,Default_Handler
+
+   .weak      SPI6_IRQHandler
+   .thumb_set SPI6_IRQHandler,Default_Handler
+
+   .weak      SAI1_IRQHandler
+   .thumb_set SAI1_IRQHandler,Default_Handler
+
+   .weak      LTDC_IRQHandler
+   .thumb_set LTDC_IRQHandler,Default_Handler
+
+   .weak      LTDC_ER_IRQHandler
+   .thumb_set LTDC_ER_IRQHandler,Default_Handler
+
+   .weak      DMA2D_IRQHandler
+   .thumb_set DMA2D_IRQHandler,Default_Handler
+
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
+
+
+
diff --git a/Device/system_stm32f4xx.c b/Device/system_stm32f4xx.c
new file mode 100644
index 0000000..bc78fb2
--- /dev/null
+++ b/Device/system_stm32f4xx.c
@@ -0,0 +1,587 @@
+/**
+  ******************************************************************************
+  * @file    system_stm32f4xx.c
+  * @author  MCD Application Team
+  * @version V2.3.2
+  * @date    26-June-2015
+  * @brief   CMSIS Cortex-M4 Device Peripheral Access Layer System Source File.
+  *
+  *   This file provides two functions and one global variable to be called from
+  *   user application:
+  *      - SystemInit(): This function is called at startup just after reset and
+  *                      before branch to main program. This call is made inside
+  *                      the "startup_stm32f4xx.s" file.
+  *
+  *      - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
+  *                                  by the user application to setup the SysTick
+  *                                  timer or configure other parameters.
+  *
+  *      - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
+  *                                 be called whenever the core clock is changed
+  *                                 during program execution.
+  *
+  *
+  ******************************************************************************
+  * @attention
+  *
+  * <h2><center>&copy; COPYRIGHT 2015 STMicroelectronics</center></h2>
+  *
+  * Redistribution and use in source and binary forms, with or without modification,
+  * are permitted provided that the following conditions are met:
+  *   1. Redistributions of source code must retain the above copyright notice,
+  *      this list of conditions and the following disclaimer.
+  *   2. Redistributions in binary form must reproduce the above copyright notice,
+  *      this list of conditions and the following disclaimer in the documentation
+  *      and/or other materials provided with the distribution.
+  *   3. Neither the name of STMicroelectronics nor the names of its contributors
+  *      may be used to endorse or promote products derived from this software
+  *      without specific prior written permission.
+  *
+  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+  * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+  * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+  *
+  ******************************************************************************
+  */
+
+/** @addtogroup CMSIS
+  * @{
+  */
+
+/** @addtogroup stm32f4xx_system
+  * @{
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Includes
+  * @{
+  */
+
+
+#include "stm32f4xx.h"
+
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE    ((uint32_t)25000000) /*!< Default value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_TypesDefinitions
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Defines
+  * @{
+  */
+
+/************************* Miscellaneous Configuration ************************/
+/*!< Uncomment the following line if you need to use external SRAM or SDRAM as data memory  */
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+/* #define DATA_IN_ExtSRAM */
+#endif /* STM32F40xxx || STM32F41xxx || STM32F42xxx || STM32F43xxx */
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) ||\
+    defined(STM32F446xx)
+/* #define DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+#if defined(DATA_IN_ExtSRAM) && defined(DATA_IN_ExtSDRAM)
+ #error "Please select DATA_IN_ExtSRAM or DATA_IN_ExtSDRAM "
+#endif /* DATA_IN_ExtSRAM && DATA_IN_ExtSDRAM */
+
+/*!< Uncomment the following line if you need to relocate your vector Table in
+     Internal SRAM. */
+/* #define VECT_TAB_SRAM */
+#define VECT_TAB_OFFSET  0x00 /*!< Vector Table base offset field.
+                                   This value must be a multiple of 0x200. */
+/******************************************************************************/
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Macros
+  * @{
+  */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Variables
+  * @{
+  */
+  /* This variable is updated in three ways:
+      1) by calling CMSIS function SystemCoreClockUpdate()
+      2) by calling HAL API function HAL_RCC_GetHCLKFreq()
+      3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
+         Note: If you use this function to configure the system clock; then there
+               is no need to call the 2 first functions listed above, since SystemCoreClock
+               variable is updated automatically.
+  */
+  uint32_t SystemCoreClock = 16000000;
+const uint8_t AHBPrescTable[16] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_FunctionPrototypes
+  * @{
+  */
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  static void SystemInit_ExtMemCtl(void);
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+/**
+  * @}
+  */
+
+/** @addtogroup STM32F4xx_System_Private_Functions
+  * @{
+  */
+
+/**
+  * @brief  Setup the microcontroller system
+  *         Initialize the FPU setting, vector table location and External memory
+  *         configuration.
+  * @param  None
+  * @retval None
+  */
+void SystemInit(void)
+{
+  /* FPU settings ------------------------------------------------------------*/
+  #if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
+    SCB->CPACR |= ((3UL << 10*2)|(3UL << 11*2));  /* set CP10 and CP11 Full Access */
+  #endif
+  /* Reset the RCC clock configuration to the default reset state ------------*/
+  /* Set HSION bit */
+  RCC->CR |= (uint32_t)0x00000001;
+
+  /* Reset CFGR register */
+  RCC->CFGR = 0x00000000;
+
+  /* Reset HSEON, CSSON and PLLON bits */
+  RCC->CR &= (uint32_t)0xFEF6FFFF;
+
+  /* Reset PLLCFGR register */
+  RCC->PLLCFGR = 0x24003010;
+
+  /* Reset HSEBYP bit */
+  RCC->CR &= (uint32_t)0xFFFBFFFF;
+
+  /* Disable all interrupts */
+  RCC->CIR = 0x00000000;
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+  SystemInit_ExtMemCtl();
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+
+  /* Configure the Vector Table location add offset address ------------------*/
+#ifdef VECT_TAB_SRAM
+  SCB->VTOR = SRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
+#else
+  SCB->VTOR = FLASH_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
+#endif
+}
+
+/**
+   * @brief  Update SystemCoreClock variable according to Clock Register Values.
+  *         The SystemCoreClock variable contains the core clock (HCLK), it can
+  *         be used by the user application to setup the SysTick timer or configure
+  *         other parameters.
+  *
+  * @note   Each time the core clock (HCLK) changes, this function must be called
+  *         to update SystemCoreClock variable value. Otherwise, any configuration
+  *         based on this variable will be incorrect.
+  *
+  * @note   - The system frequency computed by this function is not the real
+  *           frequency in the chip. It is calculated based on the predefined
+  *           constant and the selected clock source:
+  *
+  *           - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
+  *
+  *           - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
+  *
+  *           - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
+  *             or HSI_VALUE(*) multiplied/divided by the PLL factors.
+  *
+  *         (*) HSI_VALUE is a constant defined in stm32f4xx_hal_conf.h file (default value
+  *             16 MHz) but the real value may vary depending on the variations
+  *             in voltage and temperature.
+  *
+  *         (**) HSE_VALUE is a constant defined in stm32f4xx_hal_conf.h file (its value
+  *              depends on the application requirements), user has to ensure that HSE_VALUE
+  *              is same as the real frequency of the crystal used. Otherwise, this function
+  *              may have wrong result.
+  *
+  *         - The result of this function could be not correct when using fractional
+  *           value for HSE crystal.
+  *
+  * @param  None
+  * @retval None
+  */
+void SystemCoreClockUpdate(void)
+{
+  uint32_t tmp = 0, pllvco = 0, pllp = 2, pllsource = 0, pllm = 2;
+
+  /* Get SYSCLK source -------------------------------------------------------*/
+  tmp = RCC->CFGR & RCC_CFGR_SWS;
+
+  switch (tmp)
+  {
+    case 0x00:  /* HSI used as system clock source */
+      SystemCoreClock = HSI_VALUE;
+      break;
+    case 0x04:  /* HSE used as system clock source */
+      SystemCoreClock = HSE_VALUE;
+      break;
+    case 0x08:  /* PLL used as system clock source */
+
+      /* PLL_VCO = (HSE_VALUE or HSI_VALUE / PLL_M) * PLL_N
+         SYSCLK = PLL_VCO / PLL_P
+         */
+      pllsource = (RCC->PLLCFGR & RCC_PLLCFGR_PLLSRC) >> 22;
+      pllm = RCC->PLLCFGR & RCC_PLLCFGR_PLLM;
+
+      if (pllsource != 0)
+      {
+        /* HSE used as PLL clock source */
+        pllvco = (HSE_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+      }
+      else
+      {
+        /* HSI used as PLL clock source */
+        pllvco = (HSI_VALUE / pllm) * ((RCC->PLLCFGR & RCC_PLLCFGR_PLLN) >> 6);
+      }
+
+      pllp = (((RCC->PLLCFGR & RCC_PLLCFGR_PLLP) >>16) + 1 ) *2;
+      SystemCoreClock = pllvco/pllp;
+      break;
+    default:
+      SystemCoreClock = HSI_VALUE;
+      break;
+  }
+  /* Compute HCLK frequency --------------------------------------------------*/
+  /* Get HCLK prescaler */
+  tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4)];
+  /* HCLK frequency */
+  SystemCoreClock >>= tmp;
+}
+
+#if defined (DATA_IN_ExtSRAM) || defined (DATA_IN_ExtSDRAM)
+/**
+  * @brief  Setup the external memory controller.
+  *         Called in startup_stm32f4xx.s before jump to main.
+  *         This function configures the external memories (SRAM/SDRAM)
+  *         This SRAM/SDRAM will be used as program data memory (including heap and stack).
+  * @param  None
+  * @retval None
+  */
+void SystemInit_ExtMemCtl(void)
+{
+  __IO uint32_t tmp = 0x00;
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx) || defined(STM32F446xx)
+#if defined (DATA_IN_ExtSDRAM)
+  register uint32_t tmpreg = 0, timeout = 0xFFFF;
+  register uint32_t index;
+
+#if defined(STM32F446xx)
+  /* Enable GPIOA, GPIOC, GPIOD, GPIOE, GPIOF, GPIOG interface
+      clock */
+  RCC->AHB1ENR |= 0x0000007D;
+#else
+  /* Enable GPIOC, GPIOD, GPIOE, GPIOF, GPIOG, GPIOH and GPIOI interface
+      clock */
+  RCC->AHB1ENR |= 0x000001F8;
+#endif /* STM32F446xx */
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIOCEN);
+
+#if defined(STM32F446xx)
+  /* Connect PAx pins to FMC Alternate function */
+  GPIOA->AFR[0]  |= 0xC0000000;
+  GPIOA->AFR[1]  |= 0x00000000;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOA->MODER   |= 0x00008000;
+  /* Configure PDx pins speed to 50 MHz */
+  GPIOA->OSPEEDR |= 0x00008000;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOA->OTYPER  |= 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOA->PUPDR   |= 0x00000000;
+
+  /* Connect PCx pins to FMC Alternate function */
+  GPIOC->AFR[0]  |= 0x00CC0000;
+  GPIOC->AFR[1]  |= 0x00000000;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOC->MODER   |= 0x00000A00;
+  /* Configure PDx pins speed to 50 MHz */
+  GPIOC->OSPEEDR |= 0x00000A00;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOC->OTYPER  |= 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOC->PUPDR   |= 0x00000000;
+#endif /* STM32F446xx */
+
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x000000CC;
+  GPIOD->AFR[1]  = 0xCC000CCC;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOD->MODER   = 0xA02A000A;
+  /* Configure PDx pins speed to 50 MHz */
+  GPIOD->OSPEEDR = 0xA02A000A;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00000CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */
+  GPIOE->MODER   = 0xAAAA800A;
+  /* Configure PEx pins speed to 50 MHz */
+  GPIOE->OSPEEDR = 0xAAAA800A;
+  /* Configure PEx pins Output type to push-pull */
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */
+  GPIOE->PUPDR   = 0x00000000;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0xCCCCCCCC;
+  GPIOF->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PFx pins in Alternate function mode */
+  GPIOF->MODER   = 0xAA800AAA;
+  /* Configure PFx pins speed to 50 MHz */
+  GPIOF->OSPEEDR = 0xAA800AAA;
+  /* Configure PFx pins Output type to push-pull */
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0xCCCCCCCC;
+  GPIOG->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PGx pins in Alternate function mode */
+  GPIOG->MODER   = 0xAAAAAAAA;
+  /* Configure PGx pins speed to 50 MHz */
+  GPIOG->OSPEEDR = 0xAAAAAAAA;
+  /* Configure PGx pins Output type to push-pull */
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */
+  GPIOG->PUPDR   = 0x00000000;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+  /* Connect PHx pins to FMC Alternate function */
+  GPIOH->AFR[0]  = 0x00C0CC00;
+  GPIOH->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PHx pins in Alternate function mode */
+  GPIOH->MODER   = 0xAAAA08A0;
+  /* Configure PHx pins speed to 50 MHz */
+  GPIOH->OSPEEDR = 0xAAAA08A0;
+  /* Configure PHx pins Output type to push-pull */
+  GPIOH->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PHx pins */
+  GPIOH->PUPDR   = 0x00000000;
+
+  /* Connect PIx pins to FMC Alternate function */
+  GPIOI->AFR[0]  = 0xCCCCCCCC;
+  GPIOI->AFR[1]  = 0x00000CC0;
+  /* Configure PIx pins in Alternate function mode */
+  GPIOI->MODER   = 0x0028AAAA;
+  /* Configure PIx pins speed to 50 MHz */
+  GPIOI->OSPEEDR = 0x0028AAAA;
+  /* Configure PIx pins Output type to push-pull */
+  GPIOI->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PIx pins */
+  GPIOI->PUPDR   = 0x00000000;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+/*-- FMC Configuration -------------------------------------------------------*/
+  /* Enable the FMC interface clock */
+  RCC->AHB3ENR |= 0x00000001;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+
+  /* Configure and enable SDRAM bank1 */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCR[0] = 0x00001954;
+#else
+  FMC_Bank5_6->SDCR[0] = 0x000019E4;
+#endif /* STM32F446xx */
+  FMC_Bank5_6->SDTR[0] = 0x01115351;
+
+  /* SDRAM initialization sequence */
+  /* Clock enable command */
+  FMC_Bank5_6->SDCMR = 0x00000011;
+  tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  }
+
+  /* Delay */
+  for (index = 0; index<1000; index++);
+
+  /* PALL command */
+  FMC_Bank5_6->SDCMR = 0x00000012;
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  }
+
+  /* Auto refresh command */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCMR = 0x000000F3;
+#else
+  FMC_Bank5_6->SDCMR = 0x00000073;
+#endif /* STM32F446xx */
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  }
+
+  /* MRD register program */
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDCMR = 0x00044014;
+#else
+  FMC_Bank5_6->SDCMR = 0x00046014;
+#endif /* STM32F446xx */
+  timeout = 0xFFFF;
+  while((tmpreg != 0) && (timeout-- > 0))
+  {
+    tmpreg = FMC_Bank5_6->SDSR & 0x00000020;
+  }
+
+  /* Set refresh count */
+  tmpreg = FMC_Bank5_6->SDRTR;
+#if defined(STM32F446xx)
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000050C<<1));
+#else
+  FMC_Bank5_6->SDRTR = (tmpreg | (0x0000027C<<1));
+#endif /* STM32F446xx */
+
+  /* Disable write protection */
+  tmpreg = FMC_Bank5_6->SDCR[0];
+  FMC_Bank5_6->SDCR[0] = (tmpreg & 0xFFFFFDFF);
+#endif /* DATA_IN_ExtSDRAM */
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx || STM32F446xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx) || defined(STM32F417xx) ||\
+    defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx) || defined(STM32F439xx)
+
+#if defined(DATA_IN_ExtSRAM)
+/*-- GPIOs Configuration -----------------------------------------------------*/
+   /* Enable GPIOD, GPIOE, GPIOF and GPIOG interface clock */
+  RCC->AHB1ENR   |= 0x00000078;
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB1ENR, RCC_AHB1ENR_GPIODEN);
+
+  /* Connect PDx pins to FMC Alternate function */
+  GPIOD->AFR[0]  = 0x00CCC0CC;
+  GPIOD->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PDx pins in Alternate function mode */
+  GPIOD->MODER   = 0xAAAA0A8A;
+  /* Configure PDx pins speed to 100 MHz */
+  GPIOD->OSPEEDR = 0xFFFF0FCF;
+  /* Configure PDx pins Output type to push-pull */
+  GPIOD->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PDx pins */
+  GPIOD->PUPDR   = 0x00000000;
+
+  /* Connect PEx pins to FMC Alternate function */
+  GPIOE->AFR[0]  = 0xC00CC0CC;
+  GPIOE->AFR[1]  = 0xCCCCCCCC;
+  /* Configure PEx pins in Alternate function mode */
+  GPIOE->MODER   = 0xAAAA828A;
+  /* Configure PEx pins speed to 100 MHz */
+  GPIOE->OSPEEDR = 0xFFFFC3CF;
+  /* Configure PEx pins Output type to push-pull */
+  GPIOE->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PEx pins */
+  GPIOE->PUPDR   = 0x00000000;
+
+  /* Connect PFx pins to FMC Alternate function */
+  GPIOF->AFR[0]  = 0x00CCCCCC;
+  GPIOF->AFR[1]  = 0xCCCC0000;
+  /* Configure PFx pins in Alternate function mode */
+  GPIOF->MODER   = 0xAA000AAA;
+  /* Configure PFx pins speed to 100 MHz */
+  GPIOF->OSPEEDR = 0xFF000FFF;
+  /* Configure PFx pins Output type to push-pull */
+  GPIOF->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PFx pins */
+  GPIOF->PUPDR   = 0x00000000;
+
+  /* Connect PGx pins to FMC Alternate function */
+  GPIOG->AFR[0]  = 0x00CCCCCC;
+  GPIOG->AFR[1]  = 0x000000C0;
+  /* Configure PGx pins in Alternate function mode */
+  GPIOG->MODER   = 0x00085AAA;
+  /* Configure PGx pins speed to 100 MHz */
+  GPIOG->OSPEEDR = 0x000CAFFF;
+  /* Configure PGx pins Output type to push-pull */
+  GPIOG->OTYPER  = 0x00000000;
+  /* No pull-up, pull-down for PGx pins */
+  GPIOG->PUPDR   = 0x00000000;
+
+/*-- FMC/FSMC Configuration --------------------------------------------------*/
+  /* Enable the FMC/FSMC interface clock */
+  RCC->AHB3ENR         |= 0x00000001;
+
+#if defined(STM32F427xx) || defined(STM32F437xx) || defined(STM32F429xx)|| defined(STM32F439xx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FMC_Bank1->BTCR[2]  = 0x00001011;
+  FMC_Bank1->BTCR[3]  = 0x00000201;
+  FMC_Bank1E->BWTR[2] = 0x0fffffff;
+#endif /* STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+
+#if defined(STM32F405xx) || defined(STM32F415xx) || defined(STM32F407xx)|| defined(STM32F417xx)
+  /* Delay after an RCC peripheral clock enabling */
+  tmp = READ_BIT(RCC->AHB3ENR, RCC_AHB3ENR_FSMCEN);
+  /* Configure and enable Bank1_SRAM2 */
+  FSMC_Bank1->BTCR[2]  = 0x00001011;
+  FSMC_Bank1->BTCR[3]  = 0x00000201;
+  FSMC_Bank1E->BWTR[2] = 0x0FFFFFFF;
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx */
+
+#endif /* DATA_IN_ExtSRAM */
+#endif /* STM32F405xx || STM32F415xx || STM32F407xx || STM32F417xx || STM32F427xx || STM32F437xx || STM32F429xx || STM32F439xx */
+  (void)(tmp);
+}
+#endif /* DATA_IN_ExtSRAM || DATA_IN_ExtSDRAM */
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+
+/**
+  * @}
+  */
+/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/