/**
******************************************************************************
* File Name : main.c
* Date : 08/07/2015 17:46:00
* Description : Main program body
******************************************************************************
*
* COPYRIGHT(c) 2015 STMicroelectronics
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of STMicroelectronics nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
******************************************************************************
*/
/* Includes ------------------------------------------------------------------*/
#include "stm32f4xx_hal.h"
#include "stm-init.h"
#ifdef HAL_GPIO_MODULE_ENABLED
#include "stm-led.h"
#endif
#ifdef HAL_SRAM_MODULE_ENABLED
#include "stm-fmc.h"
#endif
#ifdef HAL_UART_MODULE_ENABLED
#include "stm-uart.h"
#endif
/* Private variables ---------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
#ifdef HAL_GPIO_MODULE_ENABLED
static void MX_GPIO_Init(void);
#endif
#ifdef HAL_UART_MODULE_ENABLED
static void MX_USART1_UART_Init(void);
static void MX_USART2_UART_Init(void);
#endif
void stm_init(void)
{
/* MCU Configuration----------------------------------------------------------*/
/* System interrupt init*/
/* Sets the priority grouping field */
HAL_NVIC_SetPriorityGrouping(NVIC_PRIORITYGROUP_0);
HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
/* Initialize all configured peripherals */
#ifdef HAL_GPIO_MODULE_ENABLED
MX_GPIO_Init();
#endif
#ifdef HAL_UART_MODULE_ENABLED
MX_USART1_UART_Init();
MX_USART2_UART_Init();
#endif
}
#ifdef HAL_UART_MODULE_ENABLED
/* USART1 init function */
static void MX_USART1_UART_Init(void)
{
huart_mgmt.Instance = USART1;
huart_mgmt.Init.BaudRate = USART1_BAUD_RATE;
huart_mgmt.Init.WordLength = UART_WORDLENGTH_8B;
huart_mgmt.Init.StopBits = UART_STOPBITS_1;
huart_mgmt.Init.Parity = UART_PARITY_NONE;
huart_mgmt.Init.Mode = UART_MODE_TX_RX;
huart_mgmt.Init.HwFlowCtl = UART_HWCONTROL_NONE;
huart_mgmt.Init.OverSampling = UART_OVERSAMPLING_16;
if (HAL_UART_Init(&huart_mgmt) != HAL_OK) {
/* Initialization Error */
Error_Handler();
}
}
/* USART2 init function */
static void MX_USART2_UART_Init(void)
{
huart_user.Instance = USART2;
huart_user.Init.BaudRate = USART2_BAUD_RATE;
huart_user.Init.WordLength = UART_WORDLENGTH_8B;
huart_user.Init.StopBits = UART_STOPBITS_1;
huart_user.Init.Parity = UART_PARITY_NONE;
huart_user.Init.Mode = UART_MODE_TX_RX;
huart_user.Init.HwFlowCtl = UART_HWCONTROL_NONE;
huart_user.Init.OverSampling = UART_OVERSAMPLING_16;
if (HAL_UART_Init(&huart_user) != HAL_OK) {
/* Initialization Error */
Error_Handler();
}
}
#endif
#ifdef HAL_GPIO_MODULE_ENABLED
/** Configure pins as
* Analog
* Input
* Output
* EVENT_OUT
* EXTI
*/
static void MX_GPIO_Init(void)
{
GPIO_InitTypeDef GPIO_InitStruct;
/* GPIO Ports Clock Enable */
__GPIOK_CLK_ENABLE();
/* Configure LED GPIO pins PJ1==red, PJ2==yellow, PJ3==green, PJ4==blue */
GPIO_InitStruct.Pin = LED_RED | LED_YELLOW | LED_GREEN | LED_BLUE;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_LOW;
HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct);
}
#endif
/**
* @brief This function is executed in case of error occurrence.
* @param None
* @retval None
*/
void Error_Handler(void)
{
#ifdef HAL_GPIO_MODULE_ENABLED
HAL_GPIO_WritePin(LED_PORT, LED_RED, GPIO_PIN_SET);
#endif
while (1) { ; }
}
#ifdef USE_FULL_ASSERT
/**
* @brief Reports the name of the source file and the source line number
* where the assert_param error has occurred.
* @param file: pointer to the source file name
* @param line: assert_param error line source number
* @retval None
*/
void assert_failed(uint8_t* file, uint32_t line)
{
/* USER CODE BEGIN 6 */
/* User can add his own implementation to report the file name and line number,
ex: printf("Wrong parameters value: file %s on line %d\r\n", file, line) */
/* USER CODE END 6 */
}
#endif
/**
* @}
*/
/**
* @}
*/
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
