/*
* mgmt-fpga.c
* -----------
* CLI code to manage the FPGA configuration etc.
*
* Copyright (c) 2016-2017, NORDUnet A/S All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* - Neither the name of the NORDUnet nor the names of its contributors may
* be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
* IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
* TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* Rename both CMSIS HAL_OK and libhal HAL_OK to disambiguate */
#define HAL_OK CMSIS_HAL_OK
#include "stm-init.h"
#include "stm-uart.h"
#include "stm-fpgacfg.h"
#include "mgmt-cli.h"
#include "mgmt-fpga.h"
#include "mgmt-misc.h"
#undef HAL_OK
#define HAL_OK LIBHAL_OK
#include "hal.h"
#undef HAL_OK
#include <string.h>
extern hal_user_t user;
static volatile uint32_t dfu_offset = 0;
static HAL_StatusTypeDef _flash_write_callback(uint8_t *buf, size_t len)
{
HAL_StatusTypeDef res;
if ((dfu_offset % FPGACFG_SECTOR_SIZE) == 0)
/* first page in sector, need to erase sector */
if ((res = fpgacfg_erase_sector(dfu_offset / FPGACFG_SECTOR_SIZE)) != CMSIS_HAL_OK)
return res;
res = fpgacfg_write_data(dfu_offset, buf, len);
dfu_offset += len;
return res;
}
static int cmd_fpga_bitstream_upload(struct cli_def *cli, const char *command, char *argv[], int argc)
{
command = command;
argv = argv;
argc = argc;
if (user < HAL_USER_SO) {
cli_print(cli, "Permission denied.");
return CLI_ERROR;
}
uint8_t buf[BITSTREAM_UPLOAD_CHUNK_SIZE];
dfu_offset = 0;
fpgacfg_access_control(ALLOW_ARM);
cli_print(cli, "Checking if FPGA config memory is accessible");
if (fpgacfg_check_id() != CMSIS_HAL_OK) {
cli_print(cli, "ERROR: FPGA config memory not accessible. Check that jumpers JP7 and JP8 are installed.");
return CLI_ERROR;
}
cli_receive_data(cli, &buf[0], sizeof(buf), _flash_write_callback);
fpgacfg_access_control(ALLOW_FPGA);
cli_print(cli, "DFU offset now: %li (%li chunks)", dfu_offset, dfu_offset / BITSTREAM_UPLOAD_CHUNK_SIZE);
return CLI_OK;
}
static int cmd_fpga_bitstream_erase(struct cli_def *cli, const char *command, char *argv[], int argc)
{
command = command;
argv = argv;
argc = argc;
fpgacfg_access_control(ALLOW_ARM);
cli_print(cli, "Checking if FPGA config memory is accessible");
if (fpgacfg_check_id() != CMSIS_HAL_OK) {
cli_print(cli, "ERROR: FPGA config memory not accessible. Check that jumpers JP7 and JP8 are installed.");
return CLI_ERROR;
}
/* Erasing the whole config memory takes a while, we just need to erase the first sector.
* The bitstream has an EOF marker, so even if the next bitstream uploaded is shorter than
* the current one there should be no problem.
*
* This command could be made to accept an argument indicating the whole memory should be erased.
*/
if (fpgacfg_erase_sector(0) != CMSIS_HAL_OK) {
cli_print(cli, "Erasing first sector in FPGA config memory failed");
return CLI_ERROR;
}
cli_print(cli, "Erased FPGA config memory");
fpgacfg_access_control(ALLOW_FPGA);
return CLI_OK;
}
static int cmd_fpga_reset(struct cli_def *cli, const char *command, char *argv[], int argc)
{
command = command;
argv = argv;
argc = argc;
fpgacfg_access_control(ALLOW_FPGA);
fpgacfg_reset_fpga(RESET_FULL);
hal_core_reset_table();
cli_print(cli, "FPGA has been reset");
return CLI_OK;
}
static int cmd_fpga_show_cores(struct cli_def *cli, const char *command, char *argv[], int argc)
{
hal_core_t *core;
const hal_core_info_t *info;
command = command;
argv = argv;
argc = argc;
if (fpgacfg_check_done() != CMSIS_HAL_OK) {
cli_print(cli, "FPGA has not loaded a bitstream");
return CLI_OK;
}
for (core = hal_core_iterate(NULL); core != NULL; core = hal_core_iterate(core)) {
info = hal_core_info(core);
cli_print(cli, "%04x: %8.8s %4.4s",
(unsigned int)info->base, info->name, info->version);
}
return CLI_OK;
}
void configure_cli_fpga(struct cli_def *cli)
{
struct cli_command *c = cli_register_command(cli, NULL, "fpga", NULL, 0, 0, NULL);
struct cli_command *c_show = cli_register_command(cli, c, "show", NULL, 0, 0, NULL);
struct cli_command *c_bitstream = cli_register_command(cli, c, "bitstream", NULL, 0, 0, NULL);
/* fpga show cores */
cli_register_command(cli, c_show, "cores", cmd_fpga_show_cores, 0, 0, "Show FPGA core names and versions");
/* fpga reset */
cli_register_command(cli, c, "reset", cmd_fpga_reset, 0, 0, "Reset FPGA (config reset)");
/* fpga bitstream upload */
cli_register_command(cli, c_bitstream, "upload", cmd_fpga_bitstream_upload, 0, 0, "Upload new FPGA bitstream");
/* fpga bitstream erase */
cli_register_command(cli, c_bitstream, "erase", cmd_fpga_bitstream_erase, 0, 0, "Erase FPGA config memory");
}