/*
* mgmt-test.c
* -----------
* CLI hardware test functions.
*
* Copyright (c) 2016, NORDUnet A/S All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* - Neither the name of the NORDUnet nor the names of its contributors may
* be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
* IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
* TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "stm-init.h"
#include "stm-led.h"
#include "stm-sdram.h"
#include "stm-fmc.h"
#include "stm-fpgacfg.h"
#include "mgmt-cli.h"
#include "mgmt-test.h"
#include "test_sdram.h"
#include "test_mkmif.h"
#include "test-fmc.h"
#include <stdlib.h>
static int cmd_test_sdram(struct cli_def *cli, const char *command, char *argv[], int argc)
{
// run external memory initialization sequence
int ok, num_cycles = 1, i, test_completed;
if (argc == 1) {
num_cycles = strtol(argv[0], NULL, 0);
if (num_cycles > 100) num_cycles = 100;
if (num_cycles < 1) num_cycles = 1;
}
for (i = 1; i <= num_cycles; i++) {
cli_print(cli, "Starting SDRAM test (%i/%i)", i, num_cycles);
test_completed = 0;
// set LFSRs to some initial value, LFSRs will produce
// pseudo-random 32-bit patterns to test our memories
lfsr1 = 0xCCAA5533;
lfsr2 = 0xCCAA5533;
cli_print(cli, "Run sequential write-then-read test for the first chip");
ok = test_sdram_sequential(SDRAM_BASEADDR_CHIP1);
if (!ok) break;
cli_print(cli, "Run random write-then-read test for the first chip");
ok = test_sdram_random(SDRAM_BASEADDR_CHIP1);
if (!ok) break;
cli_print(cli, "Run sequential write-then-read test for the second chip");
ok = test_sdram_sequential(SDRAM_BASEADDR_CHIP2);
if (!ok) break;
cli_print(cli, "Run random write-then-read test for the second chip");
ok = test_sdram_random(SDRAM_BASEADDR_CHIP2);
if (!ok) break;
// turn blue led on (testing two chips at the same time)
led_on(LED_BLUE);
cli_print(cli, "Run interleaved write-then-read test for both chips at once");
ok = test_sdrams_interleaved(SDRAM_BASEADDR_CHIP1, SDRAM_BASEADDR_CHIP2);
led_off(LED_BLUE);
test_completed = 1;
cli_print(cli, "SDRAM test (%i/%i) completed\r\n", i, num_cycles);
}
if (! test_completed) {
cli_print(cli, "SDRAM test failed (%i/%i)", i, num_cycles);
} else {
cli_print(cli, "SDRAM test completed successfully");
}
return CLI_OK;
}
static int cmd_test_fmc(struct cli_def *cli, const char *command, char *argv[], int argc)
{
int i, num_cycles = 1, num_rounds = 100000;
if (argc >= 1) {
num_cycles = strtol(argv[0], NULL, 0);
if (num_cycles > 100000) num_cycles = 100000;
if (num_cycles < 1) num_cycles = 1;
}
if (argc == 2) {
num_rounds = strtol(argv[1], NULL, 0);
if (num_rounds > 1000000) num_rounds = 1000000;
if (num_rounds < 1) num_rounds = 1;
}
cli_print(cli, "Checking if FPGA has loaded it's bitstream");
// Blink blue LED until the FPGA reports it has loaded it's bitstream
led_on(LED_BLUE);
while (! fpgacfg_check_done()) {
for (i = 0; i < 4; i++) {
HAL_Delay(500);
led_toggle(LED_BLUE);
}
}
// turn on green led, turn off other leds
led_on(LED_GREEN);
led_off(LED_YELLOW);
led_off(LED_RED);
led_off(LED_BLUE);
// vars
volatile int data_test_ok = 0, addr_test_ok = 0, successful_runs = 0, failed_runs = 0, sleep = 0;
for (i = 1; i <= num_cycles; i++) {
cli_print(cli, "Starting FMC test (%i/%i)", i, num_cycles);
// test data bus
data_test_ok = test_fpga_data_bus(cli, num_rounds);
// test address bus
addr_test_ok = test_fpga_address_bus(cli, num_rounds);
cli_print(cli, "Data: %i, addr %i", data_test_ok, addr_test_ok);
if (data_test_ok == num_rounds &&
addr_test_ok == num_rounds) {
// toggle yellow led to indicate, that we are alive
led_toggle(LED_YELLOW);
successful_runs++;
sleep = 0;
} else {
led_on(LED_RED);
failed_runs++;
sleep = 2000;
}
cli_print(cli, "Success %i, failed %i runs\r\n", successful_runs, failed_runs);
HAL_Delay(sleep);
}
return CLI_OK;
}
void configure_cli_test(struct cli_def *cli)
{
struct cli_command *c = cli_register_command(cli, NULL, "test", NULL, 0, 0, NULL);
/* test sdram */
cli_register_command(cli, c, "sdram", cmd_test_sdram, 0, 0, "Run SDRAM tests");
/* test mkmif */
cli_register_command(cli, c, "mkmif", cmd_test_mkmif, 0, 0, "Run Master Key Memory Interface tests");
/* test fmc */
cli_register_command(cli, c, "fmc", cmd_test_fmc, 0, 0, "Run FMC bus tests");
}
