aboutsummaryrefslogblamecommitdiff
path: root/projects/cli-test/mgmt-fpga.c
blob: c20b7b2a60939d06ea0893fb52deb8d894555970 (plain) (tree)













































































































































































                                                                                                                  
/*
 * mgmt-fpga.c
 * -----------
 * CLI code to manage the FPGA configuration etc.
 *
 * Copyright (c) 2016, NORDUnet A/S All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met:
 * - Redistributions of source code must retain the above copyright notice,
 *   this list of conditions and the following disclaimer.
 *
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 *
 * - Neither the name of the NORDUnet nor the names of its contributors may
 *   be used to endorse or promote products derived from this software
 *   without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
 * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
 * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include "stm-init.h"
#include "stm-uart.h"
#include "stm-fpgacfg.h"
#include "mgmt-cli.h"
#include "mgmt-fpga.h"

#include <string.h>


extern uint32_t update_crc(uint32_t crc, uint8_t *buf, int len);


int cmd_fpga_bitstream_upload(struct cli_def *cli, const char *command, char *argv[], int argc)
{
    uint32_t filesize = 0, crc = 0, my_crc = 0, counter = 0, i;
    uint32_t offset = 0, n = BITSTREAM_UPLOAD_CHUNK_SIZE;
    uint8_t buf[BITSTREAM_UPLOAD_CHUNK_SIZE];

    fpgacfg_access_control(ALLOW_ARM);

    cli_print(cli, "Checking if FPGA config memory is accessible");
    if (fpgacfg_check_id() != 1) {
	cli_print(cli, "ERROR: FPGA config memory not accessible. Check that jumpers JP7 and JP8 are installed.");
	return CLI_ERROR;
    }

    cli_print(cli, "OK, write FPGA bitstream file size (4 bytes), data in 4096 byte chunks, CRC-32 (4 bytes)");

    /* Read file size (4 bytes) */
    uart_receive_bytes(STM_UART_MGMT, (void *) &filesize, 4, 1000);
    cli_print(cli, "File size %li", filesize);

    while (filesize) {
	/* By initializing buf to the same value that erased flash has (0xff), we don't
	 * have to try and be smart when writing the last page of data to the memory.
	 */
	memset(buf, 0xff, sizeof(buf));

	if (filesize < n) {
	    n = filesize;
	}

	if (uart_receive_bytes(STM_UART_MGMT, (void *) &buf, n, 1000) != HAL_OK) {
	    cli_print(cli, "Receive timed out");
	    return CLI_ERROR;
	}
	filesize -= n;

	/* After reception of 4 KB but before ACKing we have "all" the time in the world to
	 * calculate CRC and write it to flash.
	 */
	my_crc = update_crc(my_crc, buf, n);

	if ((i = fpgacfg_write_data(offset, buf, BITSTREAM_UPLOAD_CHUNK_SIZE)) != 1) {
	    cli_print(cli, "Failed writing data at offset %li (counter = %li): %li", offset, counter, i);
	    return CLI_ERROR;
	}

	offset += BITSTREAM_UPLOAD_CHUNK_SIZE;

	/* ACK this chunk by sending the current chunk counter (4 bytes) */
	counter++;
	uart_send_bytes(STM_UART_MGMT, (void *) &counter, 4);
    }

    /* The sending side will now send it's calculated CRC-32 */
    cli_print(cli, "Send CRC-32");
    uart_receive_bytes(STM_UART_MGMT, (void *) &crc, 4, 1000);
    cli_print(cli, "CRC-32 %li", crc);
    if (crc == my_crc) {
	cli_print(cli, "CRC checksum MATCHED");
    } else {
	cli_print(cli, "CRC checksum did NOT match");
    }

    fpgacfg_access_control(ALLOW_FPGA);

    return CLI_OK;
}

int cmd_fpga_bitstream_erase(struct cli_def *cli, const char *command, char *argv[], int argc)
{
    fpgacfg_access_control(ALLOW_ARM);

    cli_print(cli, "Checking if FPGA config memory is accessible");
    if (fpgacfg_check_id() != 1) {
	cli_print(cli, "ERROR: FPGA config memory not accessible. Check that jumpers JP7 and JP8 are installed.");
	return CLI_ERROR;
    }

    /* Erasing the whole config memory takes a while, we just need to erase the first sector.
     * The bitstream has an EOF marker, so even if the next bitstream uploaded is shorter than
     * the current one there should be no problem.
     *
     * This command could be made to accept an argument indicating the whole memory should be erased.
     */
    if (! fpgacfg_erase_sectors(1)) {
	cli_print(cli, "Erasing first sector in FPGA config memory failed");
	return CLI_ERROR;
    }

    cli_print(cli, "Erased FPGA config memory");
    fpgacfg_access_control(ALLOW_FPGA);

    return CLI_OK;
}

int cmd_fpga_reset(struct cli_def *cli, const char *command, char *argv[], int argc)
{
    fpgacfg_access_control(ALLOW_FPGA);
    fpgacfg_reset_fpga(RESET_FULL);
    cli_print(cli, "FPGA has been reset");

    return CLI_OK;
}

int cmd_fpga_reset_registers(struct cli_def *cli, const char *command, char *argv[], int argc)
{
    fpgacfg_access_control(ALLOW_FPGA);
    fpgacfg_reset_fpga(RESET_REGISTERS);
    cli_print(cli, "FPGA registers have been reset");

    return CLI_OK;
}

void configure_cli_fpga(struct cli_def *cli)
{
    /* fpga */
    cli_command_root(fpga);
    /* fpga reset */
    cli_command_node(fpga, reset, "Reset FPGA (config reset)");
    /* fpga reset registers */
    cli_command_node(fpga_reset, registers, "Reset FPGA registers (soft reset)");

    cli_command_branch(fpga, bitstream);
    /* fpga bitstream upload */
    cli_command_node(fpga_bitstream, upload, "Upload new FPGA bitstream");
    /* fpga bitstream erase */
    cli_command_node(fpga_bitstream, erase, "Erase FPGA config memory");
}