path: root/projects/cli-test/mgmt-cli.c

/*
 * mgmt-cli.c
 * ---------
 * Management CLI code.
 *
 * Copyright (c) 2016, NORDUnet A/S All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met:
 * - Redistributions of source code must retain the above copyright notice,
 *   this list of conditions and the following disclaimer.
 *
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 *
 * - Neither the name of the NORDUnet nor the names of its contributors may
 *   be used to endorse or promote products derived from this software
 *   without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
 * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
 * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */
#include "stm-init.h"
#include "stm-uart.h"
#include "stm-led.h"
#include "mgmt-cli.h"

#include <string.h>

extern uint8_t uart_rx;

struct uart_ringbuf_t {
    uint32_t enabled, ridx;
    enum mgmt_cli_dma_state rx_state;
    uint8_t buf[CLI_UART_RECVBUF_SIZE];
};

volatile struct uart_ringbuf_t uart_ringbuf = {1, 0, DMA_RX_STOP, {0}};

#define RINGBUF_RIDX(rb)       (rb.ridx & CLI_UART_RECVBUF_MASK)
#define RINGBUF_WIDX(rb)       (sizeof(rb.buf) - __HAL_DMA_GET_COUNTER(huart_mgmt.hdmarx))
#define RINGBUF_COUNT(rb)      ((unsigned)(RINGBUF_WIDX(rb) - RINGBUF_RIDX(rb)))
#define RINGBUF_READ(rb, dst)  {dst = rb.buf[RINGBUF_RIDX(rb)]; rb.buf[RINGBUF_RIDX(rb)] = '.'; rb.ridx++;}

void uart_cli_print(struct cli_def *cli __attribute__ ((unused)), const char *buf)
{
    char crlf[] = "\r\n";
    uart_send_string2(STM_UART_MGMT, buf);
    uart_send_string2(STM_UART_MGMT, crlf);
}

int uart_cli_read(struct cli_def *cli __attribute__ ((unused)), void *buf, size_t count)
{
    uint32_t timeout = 0xffffff;
    while (count && timeout) {
	if (RINGBUF_COUNT(uart_ringbuf)) {
	    RINGBUF_READ(uart_ringbuf, *(uint8_t *) buf);
	    buf++;
	    count--;
	}
	timeout--;
    }
    if (! timeout) return 0;

    return 1;
}

int uart_cli_write(struct cli_def *cli __attribute__ ((unused)), const void *buf, size_t count)
{
    uart_send_bytes(STM_UART_MGMT, (uint8_t *) buf, count);
    return (int) count;
}

int control_mgmt_uart_dma_rx(enum mgmt_cli_dma_state state)
{
    if (state == DMA_RX_START) {
	if (uart_ringbuf.rx_state != DMA_RX_START) {
	    memset((void *) uart_ringbuf.buf, 0, sizeof(uart_ringbuf.buf));

	    /* Start receiving data from the UART using DMA */
	    HAL_UART_Receive_DMA(&huart_mgmt, (uint8_t *) uart_ringbuf.buf, sizeof(uart_ringbuf.buf));
	    uart_ringbuf.ridx = 0;
	    uart_ringbuf.rx_state = DMA_RX_START;
	}
	return 1;
    } else if (state == DMA_RX_STOP) {
	if (HAL_UART_DMAStop(&huart_mgmt) != HAL_OK) return 0;
	uart_ringbuf.rx_state = DMA_RX_STOP;
	return 1;
    }
    return 0;
}

int embedded_cli_loop(struct cli_def *cli)
{
    unsigned char c;
    int n = 0;
    static struct cli_loop_ctx ctx;

    memset(&ctx, 0, sizeof(ctx));
    ctx.insertmode = 1;

    cli->state = CLI_STATE_LOGIN;

    /* start off in unprivileged mode */
    cli_set_privilege(cli, PRIVILEGE_UNPRIVILEGED);
    cli_set_configmode(cli, MODE_EXEC, NULL);

    cli_error(cli, "%s", cli->banner);

    while (1) {
	cli_loop_start_new_command(cli, &ctx);

	control_mgmt_uart_dma_rx(DMA_RX_START);

	while (1) {
	    cli_loop_show_prompt(cli, &ctx);

	    n = cli_loop_read_next_char(cli, &ctx, &c);

	    /*
	    cli_print(cli, "Next char: '%c'/%i, ringbuf ridx %i, widx %i",
		      c, (int) c,
		      uart_ringbuf.ridx,
		      RINGBUF_WIDX(uart_ringbuf)
	    */
	    if (n == CLI_LOOP_CTRL_BREAK)
		break;
	    if (n == CLI_LOOP_CTRL_CONTINUE)
		continue;

	    n = cli_loop_process_char(cli, &ctx, c);
	    if (n == CLI_LOOP_CTRL_BREAK)
		break;
	    if (n == CLI_LOOP_CTRL_CONTINUE)
		continue;
	}

	if (ctx.l < 0) break;

	/* cli_print(cli, "Process command: '%s'", ctx.cmd); */
	n = cli_loop_process_cmd(cli, &ctx);
	if (n == CLI_LOOP_CTRL_BREAK)
	    break;
    }

    return CLI_OK;
}

void mgmt_cli_init(struct cli_def *cli)
{
    cli_init(cli);
    cli_read_callback(cli, uart_cli_read);
    cli_write_callback(cli, uart_cli_write);
    cli_print_callback(cli, uart_cli_print);
    cli_set_banner(cli, "Cryptech Alpha");
    cli_set_hostname(cli, "cryptech");
    cli_telnet_protocol(cli, 0);
}