path: root/projects/board-test/rtc-test.c

/*
 * Test code for the RTC.
 *
 * Dumps the SRAM and EEPROM on startup, then enables the oscillator.
 * After that, the clock registers are read once a second - the first byte
 * is seconds (and some control bits, so dont expect 0..59).
 *
 */
#include <string.h>

#include "stm-init.h"
#include "stm-led.h"
#include "stm-uart.h"
#include "stm-rtc.h"

#define DELAY() HAL_Delay(1000)


uint8_t buf[1024];
uint32_t i;


uint32_t device_ready(uint16_t i2c_addr)
{
    uart_send_string("Checking readiness of 0x");
    uart_send_hex(i2c_addr, 4);
    uart_send_string("...");

    if (rtc_device_ready(i2c_addr) == HAL_OK) {
	uart_send_string("OK\r\n");
	return 1;
    }

    uart_send_string("Not ready (0x");
    uart_send_hex(i, 4);
    uart_send_string(")\r\n");

    return 0;
}


void send_byte(const uint16_t i2c_addr, const uint8_t value)
{
    uint8_t ch = value;

    uart_send_string("Sending ");
    uart_send_hex(ch, 2);
    uart_send_string(" to 0x");
    uart_send_hex(i2c_addr, 4);
    uart_send_string("...");

    if (rtc_send_byte(i2c_addr, ch, 1000) != HAL_OK) {
	uart_send_string("Timeout\r\n");
	Error_Handler();
    }

    uart_send_string("OK\r\n");
}

void read_bytes (uint8_t *buf, const uint16_t i2c_addr, const uint8_t len)
{
    uart_send_string("Reading ");
    uart_send_integer(len, 1);
    uart_send_string(" bytes from 0x");
    uart_send_hex(i2c_addr, 4);
    uart_send_string("...");

    if (rtc_read_bytes(i2c_addr, buf, len, 1000) != HAL_OK) {
	uart_send_string("Timeout\r\n");
	Error_Handler();
    }

    uart_send_string("OK\r\n");
}

void request_data(uint8_t *buf, const uint16_t i2c_addr, const uint8_t offset, const uint8_t bytes)
{
    send_byte(i2c_addr, offset);
    read_bytes(buf, i2c_addr, bytes);
}

void print_time()
{
    request_data(buf, RTC_RTC_ADDR, RTC_TIME_OFFSET, RTC_TIME_BYTES);

    for (i = 0; i < RTC_TIME_BYTES; i++) {
	uart_send_hex(buf[i], 2);
	uart_send_string(" ");
    }
}

void dump_sram()
{
    request_data(buf, RTC_RTC_ADDR, 0x0, RTC_SRAM_TOTAL_BYTES);

    uart_send_string("SRAM contents:\r\n");
    uart_send_hexdump(buf, 0, RTC_SRAM_TOTAL_BYTES);

    uart_send_string("\r\n");
}

void dump_eeprom()
{
    request_data(buf, RTC_EEPROM_ADDR, 0x0, RTC_EEPROM_TOTAL_BYTES);

    uart_send_string("EEPROM contents:\r\n");
    uart_send_hexdump(buf, 0, RTC_EEPROM_TOTAL_BYTES);
    uart_send_string("\r\n");

    request_data(buf, RTC_EEPROM_ADDR, RTC_EEPROM_EUI48_OFFSET, RTC_EEPROM_EUI48_BYTES);
    uart_send_string("EEPROM EUI-48:\r\n");
    uart_send_hexdump(buf, RTC_EEPROM_EUI48_OFFSET, RTC_EEPROM_EUI48_BYTES);

    uart_send_string("\r\n");
}

void enable_oscillator()
{
    uart_send_string("Enabling oscillator...\r\n");

    if (rtc_enable_oscillator() != HAL_OK) {
	uart_send_string("Timeout\r\n");
	Error_Handler();
    }

    uart_send_string("OK\r\n");
}


int
main()
{
    stm_init();
    uart_send_string("\r\n\r\n*** Init done\r\n");

    dump_sram();
    dump_eeprom();

    enable_oscillator();

    while (1)  {
	memset(buf, 0, sizeof(buf));

	if (! device_ready(RTC_RTC_ADDR)) {
	    goto fail;
	}

	print_time(buf);

	uart_send_string("\r\n\r\n");

	HAL_GPIO_TogglePin(LED_PORT, LED_GREEN);
	DELAY();
	continue;

    fail:
	HAL_GPIO_TogglePin(LED_PORT, LED_RED);
	DELAY();
    }
}