blob: da138c2f0b6280a7ff939a00a1d1d901afbb1f96 (
plain) (
tree)
|
|
Profiling the Cryptech Alpha
============================
Origin
------
This code was copied from https://github.com/ErichStyger/mcuoneclipse.git,
directory Examples/KDS/FRDM-K64F120M/FRDM-K64F_Profiling/Profiling, commit
9b7eedddd8b24968128582aedc63be95b61f782c, dated Mon Jan 9 16:56:17 2017 +0100.
References
----------
I recommend reading both of these to understand how the profiling code works.
[1]: https://mcuoneclipse.com/2015/08/23/tutorial-using-gnu-profiling-gprof-with-arm-cortex-m/
"Tutorial: Using GNU Profiling (gprof) with ARM Cortex-M"
[2]: http://bgamari.github.io/posts/2014-10-31-semihosting.html
"Semihosting with ARM, GCC, and OpenOCD"
How to build
------------
From the top level, run
make DO_PROFILING=1 hsm
By default, all code is profiled, *except* the profiling code itself,
because that would cause fatal recursion.
How to run
----------
You need to start OpenOCD on the host, and enable semihosting, at least
before you try to use it as a remote file system.
I recommend executing the following in the projects/hsm directory, so that
gmon.out ends up in the same directory as hsm.elf.
Start OpenOCD:
$ openocd -f /usr/share/openocd/scripts/board/stm32f4discovery.cfg &
Connect to OpenOCD:
$ telnet localhost 4444
In the OpenOCD console, enable semihosting:
> arm semihosting enable
In the CLI, type `profile start`, then start the unit test or whatever
will be exercising the hsm. Afterwards, in the CLI, type `profile stop`.
After invoking `profile stop`, it takes almost 2 minutes to write gmon.out
over OpenOCD to the host.
In the projects/hsm directory, run gprof to analyse the gmon.out file:
$ gprof hsm.elf >gprof.txt
|
