/*
* ks_flash.c
* ----------
* Keystore implementation in flash memory.
*
* Authors: Rob Austein, Fredrik Thulin
* Copyright (c) 2015-2016, NORDUnet A/S All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are
* met:
* - Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
*
* - Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* - Neither the name of the NORDUnet nor the names of its contributors may
* be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
* IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
* PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
* TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
* PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include "hal.h"
#include "hal_internal.h"
#include <string.h>
#define _SAVE_OUR_HAL_OK HAL_OK
#undef HAL_OK
#warning Unmaintainable workaround for two different HAL_OKs used here
/* Don't #include "stm-keystore.h" to avoid conflicting definitions of HAL_OK
* as well as circular dependencies I guess.
*/
#define N25Q128_PAGE_SIZE 0x100 // 256
#define N25Q128_SECTOR_SIZE 0x10000 // 65536
#define N25Q128_NUM_SECTORS 0x100 // 256
#define KEYSTORE_PAGE_SIZE N25Q128_PAGE_SIZE
#define KEYSTORE_SECTOR_SIZE N25Q128_SECTOR_SIZE
#define KEYSTORE_NUM_SECTORS N25Q128_NUM_SECTORS
extern int keystore_check_id(void);
extern int keystore_read_data(uint32_t offset, uint8_t *buf, const uint32_t len);
extern int keystore_write_data(uint32_t offset, const uint8_t *buf, const uint32_t len);
extern int keystore_erase_sectors(uint32_t start, uint32_t stop);
#define PAGE_SIZE_MASK (KEYSTORE_PAGE_SIZE - 1)
/*
* Use a one-element array here so that references can be pointer-based
* as in the other implementations, to ease re-merge at some later date.
*/
static hal_ks_keydb_t db[1];
volatile uint32_t num_keys = 0;
/* Offsets where we found the entrys */
#define FLASH_SECTOR_1_OFFSET (0 * KEYSTORE_SECTOR_SIZE)
#define FLASH_SECTOR_2_OFFSET (1 * KEYSTORE_SECTOR_SIZE)
uint32_t _active_sector_offset()
{
/* XXX Load status bytes from both sectors and decide which is current. */
#warning Have not implemented two flash sectors yet
return FLASH_SECTOR_1_OFFSET;
}
uint32_t _get_key_offset(uint32_t num, size_t elem_size)
{
/* Reserve first two pages for flash sector state, PINs and future additions.
* The three PINs alone currently occupy 3 * (64 + 16 + 4) bytes (252).
*/
uint32_t offset = KEYSTORE_PAGE_SIZE * 2;
uint32_t bytes_per_elem = KEYSTORE_PAGE_SIZE * ((elem_size / KEYSTORE_PAGE_SIZE) + 1);
offset += num * bytes_per_elem;
return offset;
}
const hal_ks_keydb_t *hal_ks_get_keydb(void)
{
uint32_t offset, i, idx = 0, active_sector_offset;
hal_ks_key_t *key;
uint8_t page_buf[KEYSTORE_PAGE_SIZE];
if (keystore_check_id() != 1) return NULL;
active_sector_offset = _active_sector_offset();
/* The PINs are in the second page of the sector. */
offset = active_sector_offset + KEYSTORE_PAGE_SIZE;
if (keystore_read_data(offset, page_buf, sizeof(page_buf)) != 1) return NULL;
offset = 0;
memcpy(&db->wheel_pin, page_buf + offset, sizeof(db->wheel_pin));
offset += sizeof(db->wheel_pin);
memcpy(&db->so_pin, page_buf + offset, sizeof(db->so_pin));
offset += sizeof(db->so_pin);
memcpy(&db->user_pin, page_buf + offset, sizeof(db->user_pin));
for (i = 0; i < sizeof(db->keys) / sizeof(*db->keys); i++) {
offset = _get_key_offset(i, sizeof(*key));
if (offset > KEYSTORE_SECTOR_SIZE) {
memset(&db->keys[idx], 0, sizeof(*db->keys));
db->keys[idx].ks_internal = offset;
idx++;
continue;
}
offset += active_sector_offset;
if (keystore_read_data(offset, page_buf, sizeof(page_buf)) != 1) return NULL;
key = (hal_ks_key_t *) page_buf;
if (key->in_use == 0xff) {
/* unprogrammed data */
memset(&db->keys[idx], 0, sizeof(*db->keys));
db->keys[idx].ks_internal = offset;
idx++;
continue;
}
if (key->in_use == 1) {
key = &db->keys[idx++];
uint8_t *dst = (uint8_t *) key;
uint32_t to_read = sizeof(*key);
/* Put first page into place */
memcpy(dst, page_buf, sizeof(page_buf));
to_read -= KEYSTORE_PAGE_SIZE;
dst += sizeof(page_buf);
/* Read as many more full pages as possible */
if (keystore_read_data (offset + KEYSTORE_PAGE_SIZE, dst, to_read & ~PAGE_SIZE_MASK) != 1) return NULL;
dst += to_read & ~PAGE_SIZE_MASK;
to_read &= PAGE_SIZE_MASK;
if (to_read) {
/* Partial last sector. We can only read full sectors so load it into page_buf. */
if (keystore_read_data(offset + sizeof(*key) - to_read, page_buf, sizeof(page_buf)) != 1) return NULL;
memcpy(dst, page_buf, to_read);
}
key->ks_internal = offset;
}
}
return db;
}
hal_error_t _write_data_to_flash(const uint32_t offset, const uint8_t *data, const size_t len)
{
uint8_t page_buf[KEYSTORE_PAGE_SIZE];
uint32_t to_write = len;
if (keystore_write_data(offset, data, to_write & ~PAGE_SIZE_MASK) != 1) {
return HAL_ERROR_KEYSTORE_ACCESS;
}
to_write &= PAGE_SIZE_MASK;
if (to_write) {
/* Use page_buf to write the remaining bytes, since we must write a full page each time. */
memset(page_buf, 0xff, sizeof(page_buf));
memcpy(page_buf, data + len - to_write, to_write);
if (keystore_write_data((offset + len) & ~PAGE_SIZE_MASK, page_buf, sizeof(page_buf)) != 1) {
return HAL_ERROR_KEYSTORE_ACCESS;
}
}
return HAL_OK;
}
/*
* Write the full DB to flash, PINs and all.
*/
hal_error_t _write_db_to_flash(const uint32_t sector_offset)
{
hal_error_t status;
uint8_t page_buf[KEYSTORE_PAGE_SIZE];
uint32_t i, offset = sector_offset;
if (sizeof(db->wheel_pin) + sizeof(db->so_pin) + sizeof(db->user_pin) > sizeof(page_buf)) {
return HAL_ERROR_BAD_ARGUMENTS;
}
/* Write PINs into the second of the two reserved pages at the start of the sector. */
offset += KEYSTORE_PAGE_SIZE;
memcpy(page_buf + offset, &db->wheel_pin, sizeof(db->wheel_pin));
offset += sizeof(db->wheel_pin);
memcpy(page_buf + offset, &db->so_pin, sizeof(db->so_pin));
offset += sizeof(db->so_pin);
memcpy(page_buf + offset, &db->user_pin, sizeof(db->user_pin));
if ((status = _write_data_to_flash(offset, page_buf, sizeof(page_buf))) != HAL_OK) {
return status;
}
for (i = 0; i < sizeof(db->keys) / sizeof(*db->keys); i++) {
offset = _get_key_offset(i, sizeof(*db->keys));
if (offset > KEYSTORE_SECTOR_SIZE) {
return HAL_ERROR_BAD_ARGUMENTS;
}
offset += sector_offset;
if ((status =_write_data_to_flash(offset, (uint8_t *) &db->keys[i], sizeof(*db->keys))) != HAL_OK) {
return status;
}
}
return HAL_OK;
}
hal_error_t hal_ks_set_keydb(const hal_ks_key_t * const key,
const int loc,
const int updating)
{
hal_error_t status;
uint32_t offset, active_sector_offset;
hal_ks_key_t *tmp_key;
uint8_t page_buf[KEYSTORE_PAGE_SIZE];
if (key == NULL || loc < 0 || loc >= sizeof(db->keys)/sizeof(*db->keys) || (!key->in_use != !updating))
return HAL_ERROR_BAD_ARGUMENTS;
offset = _get_key_offset(loc, sizeof(*key));
if (offset > KEYSTORE_SECTOR_SIZE) return HAL_ERROR_BAD_ARGUMENTS;
active_sector_offset = _active_sector_offset();
offset += active_sector_offset;
if (keystore_check_id() != 1) return HAL_ERROR_KEYSTORE_ACCESS;
/* Check if there is a key occupying this slot in the flash already.
* Don't trust the in-memory representation since it would mean data
* corruption in flash if it had been altered.
*/
if (keystore_read_data(offset, page_buf, sizeof(page_buf)) != 1) {
return HAL_ERROR_KEYSTORE_ACCESS;
}
tmp_key = (hal_ks_key_t *) page_buf;
if (tmp_key->in_use == 0xff) {
/* Key slot was unused in flash. Write the new key there. */
if ((status = _write_data_to_flash(offset, (uint8_t *) key, sizeof(*db->keys))) != HAL_OK) {
return status;
}
} else {
/* TODO: Erase and write the database to the inactive sector, and then toggle active sector. */
if (keystore_erase_sectors(active_sector_offset / KEYSTORE_SECTOR_SIZE,
active_sector_offset / KEYSTORE_SECTOR_SIZE) != 1) {
return HAL_ERROR_KEYSTORE_ACCESS;
}
if ((status =_write_db_to_flash(active_sector_offset)) != HAL_OK) {
return status;
}
}
return HAL_OK;
}
hal_error_t hal_ks_del_keydb(const int loc)
{
uint32_t offset;
if (loc < 0 || loc >= sizeof(db->keys)/sizeof(*db->keys))
return HAL_ERROR_BAD_ARGUMENTS;
offset = _get_key_offset(loc, sizeof(*db->keys));
if (offset > KEYSTORE_SECTOR_SIZE) {
return HAL_ERROR_BAD_ARGUMENTS;
}
offset += _active_sector_offset();
memset(&db->keys[loc], 0, sizeof(*db->keys));
/* Setting bits to 0 never requires erasing flash. Just write it. */
return _write_data_to_flash(offset, (uint8_t *) &db->keys[loc], sizeof(*db->keys));
}
hal_error_t hal_ks_set_pin(const hal_user_t user,
const hal_ks_pin_t * const pin)
{
uint32_t active_sector_offset;
if (pin == NULL)
return HAL_ERROR_BAD_ARGUMENTS;
hal_ks_pin_t *p = NULL;
switch (user) {
case HAL_USER_WHEEL: p = &db->wheel_pin; break;
case HAL_USER_SO: p = &db->so_pin; break;
case HAL_USER_NORMAL: p = &db->user_pin; break;
default: return HAL_ERROR_BAD_ARGUMENTS;
}
memcpy(p, pin, sizeof(*p));
active_sector_offset = _active_sector_offset();
/* TODO: Could check if the PIN is currently all 0xff, in which case we wouldn't have to
* erase and re-write the whole DB.
*/
/* TODO: Erase and write the database to the inactive sector, and then toggle active sector. */
if (keystore_erase_sectors(active_sector_offset / KEYSTORE_SECTOR_SIZE,
active_sector_offset / KEYSTORE_SECTOR_SIZE) != 1) {
return HAL_ERROR_KEYSTORE_ACCESS;
}
return _write_db_to_flash(active_sector_offset);
}
hal_error_t hal_ks_get_kek(uint8_t *kek,
size_t *kek_len,
const size_t kek_max)
{
if (kek == NULL || kek_len == NULL || kek_max < bitsToBytes(128))
return HAL_ERROR_BAD_ARGUMENTS;
const size_t len = ((kek_max < bitsToBytes(192)) ? bitsToBytes(128) :
(kek_max < bitsToBytes(256)) ? bitsToBytes(192) :
bitsToBytes(256));
#warning Faking the Key Encryption Key
memset(kek, 4, len);
return HAL_OK;
}
/*
* Local variables:
* indent-tabs-mode: nil
* End:
*/