path: root/hal_internal.h

/*
 * hal_internal.h
 * --------------
 * Internal API declarations for libhal.
 *
 * Authors: Rob Austein, Paul Selkirk
 * Copyright (c) 2015, NORDUnet A/S All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions are
 * met:
 * - Redistributions of source code must retain the above copyright notice,
 *   this list of conditions and the following disclaimer.
 *
 * - Redistributions in binary form must reproduce the above copyright
 *   notice, this list of conditions and the following disclaimer in the
 *   documentation and/or other materials provided with the distribution.
 *
 * - Neither the name of the NORDUnet nor the names of its contributors may
 *   be used to endorse or promote products derived from this software
 *   without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
 * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
 * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef _HAL_INTERNAL_H_
#define _HAL_INTERNAL_H_

#include <string.h>

#include "hal.h"
#include "verilog_constants.h"

/*
 * Everything in this file is part of the internal API, that is,
 * subject to change without notice.  Nothing outside of libhal itself
 * should be looking at this file.
 */

/*
 * htonl is not available in arm-none-eabi headers or libc.
 */
#ifndef STM32F4XX
#include <arpa/inet.h>
#else
#ifdef __ARMEL__                /* little endian */
inline uint32_t htonl(uint32_t w)
{
    return
        ((w & 0x000000ff) << 24) +
        ((w & 0x0000ff00) << 8) +
        ((w & 0x00ff0000) >> 8) +
        ((w & 0xff000000) >> 24);
}
#else                           /* big endian */
#define htonl(x) (x)
#endif
#define ntohl htonl
#endif

/*
 * Longest hash block and digest we support at the moment.
 */

#define HAL_MAX_HASH_BLOCK_LENGTH       SHA512_BLOCK_LEN
#define HAL_MAX_HASH_DIGEST_LENGTH      SHA512_DIGEST_LEN

/*
 * Dispatch structures for RPC implementation.
 *
 * The breakdown of which functions go into which dispatch vectors is
 * based entirely on pesky details like making sure that the right
 * functions get linked in the right cases, and should not be
 * construed as making any particular sense in any larger context.
 *
 * In theory eventually we might want a fully general mechanism to
 * allow us to dispatch arbitrary groups of functions either locally
 * or remotely on a per-user basis.  In practice, we probably want to
 * run everything on the HSM except for hashing and digesting, so just
 * code for that case initially while leaving the design open for a
 * more general mechanism later if warranted.
 *
 * So we have three cases:
 *
 * - We're the HSM, so we do everything locally (ie, we run the RPC
 *   server functions.
 *
 * - We're the host, so we do everything remotely (ie, we do
 *   everything using the client-side RPC calls.
 *
 * - We're the host but are doing hashing locally, so we do a mix.
 *   This is slightly more complicated than it might at first appear,
 *   because we must handle the case of one of the pkey functions
 *   taking a hash context instead of a literal hash value, in which
 *   case we have to extract the hash value from the context and
 *   supply it to the pkey RPC client code as a literal value.
 *
 * ...Except that for PKCS #11 we also have to handle the case of
 * "session keys", ie, keys which are not stored on the HSM.
 * Apparently people really do use these, mostly for public keys, in
 * order to conserve expensive memory on the HSM.  So this is another
 * feature of mixed mode: keys with HAL_KEY_FLAG_PROXIMATE set live on
 * the host, not in the HSM, and the mixed-mode pkey handlers deal
 * with the routing.  In the other two modes we ignore the flag and
 * send everything where we were going to send it anyway.  Restricting
 * the fancy key handling to mixed mode lets us drop this complexity
 * out entirely for applications which have no use for it.
 */

typedef struct {

  hal_error_t (*set_pin)(const hal_client_handle_t client,
                         const hal_user_t user,
                         const char * const newpin, const size_t newpin_len);

  hal_error_t (*login)(const hal_client_handle_t client,
                       const hal_user_t user,
                       const char * const newpin, const size_t newpin_len);

  hal_error_t (*logout)(const hal_client_handle_t client);

  hal_error_t (*logout_all)(void);

  hal_error_t (*is_logged_in)(const hal_client_handle_t client,
                              const hal_user_t user);

  hal_error_t (*get_random)(void *buffer, const size_t length);

  hal_error_t (*get_version)(uint32_t *version);

} hal_rpc_misc_dispatch_t;


typedef struct {

  hal_error_t (*get_digest_length)(const hal_digest_algorithm_t alg, size_t *length);

  hal_error_t (*get_digest_algorithm_id)(const hal_digest_algorithm_t alg,
                                         uint8_t *id, size_t *len, const size_t len_max);

  hal_error_t (*get_algorithm)(const hal_hash_handle_t hash, hal_digest_algorithm_t *alg);

  hal_error_t (*initialize)(const hal_client_handle_t client,
                            const hal_session_handle_t session,
                            hal_hash_handle_t *hash,
                            const hal_digest_algorithm_t alg,
                            const uint8_t * const key, const size_t key_length);

  hal_error_t (*update)(const hal_hash_handle_t hash,
                        const uint8_t * data, const size_t length);

  hal_error_t (*finalize)(const hal_hash_handle_t hash,
                          uint8_t *digest, const size_t length);
} hal_rpc_hash_dispatch_t;


typedef struct {

  hal_error_t  (*load)(const hal_client_handle_t client,
                       const hal_session_handle_t session,
                       hal_pkey_handle_t *pkey,
                       const hal_key_type_t type,
                       const hal_curve_name_t curve,
                       hal_uuid_t *name,
                       const uint8_t * const der, const size_t der_len,
                       const hal_key_flags_t flags);

  hal_error_t  (*find)(const hal_client_handle_t client,
                       const hal_session_handle_t session,
                       hal_pkey_handle_t *pkey,
                       const hal_uuid_t * const name,
                       const hal_key_flags_t flags);

  hal_error_t  (*generate_rsa)(const hal_client_handle_t client,
                               const hal_session_handle_t session,
                               hal_pkey_handle_t *pkey,
                               hal_uuid_t *name,
                               const unsigned key_length,
                               const uint8_t * const public_exponent, const size_t public_exponent_len,
                               const hal_key_flags_t flags);

  hal_error_t  (*generate_ec)(const hal_client_handle_t client,
                              const hal_session_handle_t session,
                              hal_pkey_handle_t *pkey,
                              hal_uuid_t *name,
                              const hal_curve_name_t curve,
                              const hal_key_flags_t flags);

  hal_error_t  (*close)(const hal_pkey_handle_t pkey);

  hal_error_t  (*delete)(const hal_pkey_handle_t pkey);

  hal_error_t  (*get_key_type)(const hal_pkey_handle_t pkey,
                               hal_key_type_t *key_type);

  hal_error_t  (*get_key_flags)(const hal_pkey_handle_t pkey,
                                hal_key_flags_t *flags);

  size_t (*get_public_key_len)(const hal_pkey_handle_t pkey);

  hal_error_t  (*get_public_key)(const hal_pkey_handle_t pkey,
                                 uint8_t *der, size_t *der_len, const size_t der_max);

  hal_error_t  (*sign)(const hal_session_handle_t session,
                       const hal_pkey_handle_t pkey,
                       const hal_hash_handle_t hash,
                       const uint8_t * const input,  const size_t input_len,
                       uint8_t * signature, size_t *signature_len, const size_t signature_max);

  hal_error_t  (*verify)(const hal_session_handle_t session,
                         const hal_pkey_handle_t pkey,
                         const hal_hash_handle_t hash,
                         const uint8_t * const input, const size_t input_len,
                         const uint8_t * const signature, const size_t signature_len);

  hal_error_t  (*list)(hal_pkey_info_t *result,
                       unsigned *result_len,
                       const unsigned result_max,
                       hal_key_flags_t flags);

} hal_rpc_pkey_dispatch_t;


extern const hal_rpc_misc_dispatch_t hal_rpc_local_misc_dispatch, hal_rpc_remote_misc_dispatch, *hal_rpc_misc_dispatch;
extern const hal_rpc_hash_dispatch_t hal_rpc_local_hash_dispatch, hal_rpc_remote_hash_dispatch, *hal_rpc_hash_dispatch;
extern const hal_rpc_pkey_dispatch_t hal_rpc_local_pkey_dispatch, hal_rpc_remote_pkey_dispatch, hal_rpc_mixed_pkey_dispatch, *hal_rpc_pkey_dispatch;

/*
 * See code in rpc_pkey.c for how this flag fits into the pkey handle.
 */

#define HAL_PKEY_HANDLE_TOKEN_FLAG  (1 << 31)

/*
 * Mostly used by the local_pkey code, but the mixed_pkey code needs
 * it to pad hashes for RSA PKCS #1.5 signatures.  This may indicate
 * that we need a slightly more general internal API here, but not
 * worth worrying about as long as we can treat RSA as a special case
 * and just pass the plain hash for everything else.
 */

extern hal_error_t hal_rpc_pkcs1_construct_digestinfo(const hal_hash_handle_t handle,
                                                      uint8_t *digest_info, size_t *digest_info_len,
                                                      const size_t digest_info_max);

/*
 * UUID stuff.  All UUIDs we use (or are likely to use) are type 4 "random" UUIDs
 * Some of this may need to move to hal.h.
 */

#define HAL_UUID_TEXT_SIZE	(sizeof("00112233-4455-6677-8899-aabbccddeeff"))

static inline int hal_uuid_cmp(const hal_uuid_t * const a, const hal_uuid_t * const b)
{
  return memcmp(a, b, sizeof(hal_uuid_t));
}

extern hal_error_t hal_uuid_gen(hal_uuid_t *uuid);

extern hal_error_t hal_uuid_parse(hal_uuid_t *uuid, const char * const string);

extern hal_error_t hal_uuid_format(const hal_uuid_t * const uuid, char *buffer, const size_t buffer_len);

/*
 * CRC-32 stuff (for flash keystore, etc).  Dunno if we want a Verilog
 * implementation of this, or if it would even be faster than doing it
 * the main CPU taking I/O overhead and so forth into account.
 *
 * These prototypes were generated by pycrc.py, see notes in crc32.c.
 */

typedef uint32_t hal_crc32_t;

static inline hal_crc32_t hal_crc32_init(void)
{
  return 0xffffffff;
}

extern hal_crc32_t hal_crc32_update(hal_crc32_t crc, const void *data, size_t data_len);

static inline hal_crc32_t hal_crc32_finalize(hal_crc32_t crc)
{
  return crc ^ 0xffffffff;
}

/*
 * Sizes for ASN.1-encoded keys, this may not be exact due to ASN.1
 * INTEGER encoding rules but should be good enough for buffer sizing:
 *
 * 2048-bit RSA:        1194 bytes
 * 4096-bit RSA:        2351 bytes
 * 8192-bit RSA:        4655 bytes
 * EC P-256:             121 bytes
 * EC P-384:             167 bytes
 * EC P-521:             223 bytes
 *
 * Plus we need a bit of AES-keywrap overhead, since we're storing the
 * wrapped form (see hal_aes_keywrap_cyphertext_length()).
 */

#define HAL_KS_WRAPPED_KEYSIZE  ((4655 + 15) & ~7)

/*
 * PINs.
 *
 * The functions here might want renaming, eg, to hal_pin_*().
 */

#ifndef HAL_PIN_SALT_LENGTH
#define HAL_PIN_SALT_LENGTH 16
#endif

typedef struct {
  uint32_t iterations;
  uint8_t pin[HAL_MAX_HASH_DIGEST_LENGTH];
  uint8_t salt[HAL_PIN_SALT_LENGTH];
} hal_ks_pin_t;

extern hal_error_t hal_set_pin_default_iterations(const hal_client_handle_t client,
                                                  const uint32_t iterations);

extern hal_error_t hal_get_pin(const hal_user_t user,
                               const hal_ks_pin_t **pin);

extern hal_error_t hal_set_pin(const hal_user_t user,
                               const hal_ks_pin_t * const pin);

/*
 * Master key memory (MKM) and key-encryption-key (KEK).
 *
 * Providing a mechanism for storing the KEK in flash is a horrible
 * kludge which defeats the entire purpose of having the MKM.  We
 * support it for now because the Alpha hardware does not yet have
 * a working battery backup for the MKM, but it should go away RSN.
 */

#ifndef HAL_MKM_FLASH_BACKUP_KLUDGE
#define HAL_MKM_FLASH_BACKUP_KLUDGE 1
#endif

extern hal_error_t hal_mkm_get_kek(uint8_t *kek, size_t *kek_len, const size_t kek_max);

extern hal_error_t hal_mkm_volatile_read(uint8_t *buf, const size_t len);
extern hal_error_t hal_mkm_volatile_write(const uint8_t * const buf, const size_t len);
extern hal_error_t hal_mkm_volatile_erase(const size_t len);

#if HAL_MKM_FLASH_BACKUP_KLUDGE

#warning MKM flash backup kludge enabled.  Do NOT use this in production!

extern hal_error_t hal_mkm_flash_read(uint8_t *buf, const size_t len);
extern hal_error_t hal_mkm_flash_write(const uint8_t * const buf, const size_t len);
extern hal_error_t hal_mkm_flash_erase(const size_t len);

#endif

/*
 * Keystore API for use by the pkey implementation.
 *
 * In an attempt to emulate what current theory says will eventually
 * be the behavior of the underlying Cryptech Verilog "hardware",
 * these functions automatically apply the AES keywrap transformations.
 *
 * Unclear whether these should also call the ASN.1 encode/decode
 * functions.  For the moment, the answer is no, but we may need to
 * revisit this as the underlying Verilog API evolves.
 *
 * hal_pkey_slot_t is defined here too, so that keystore drivers can
 * piggyback on the pkey database for storage related to keys on which
 * the user currently has an active pkey handle.  Nothing outside the
 * pkey and keystore code should touch this.
 */

typedef struct {
  hal_client_handle_t client_handle;
  hal_session_handle_t session_handle;
  hal_pkey_handle_t pkey_handle;
  hal_key_type_t type;
  hal_curve_name_t curve;
  hal_key_flags_t flags;
  hal_uuid_t name;

  /*
   * We used to stash a "hint" value here for the keystore driver to
   * speed things up when we had multiple operations on the same key.
   * Removed as premature optimization during keystore rewrite, but we
   * may want to put something like this back once the new API has
   * stablized.  If so, form would probably be a union containing
   * keystore-driver-specific data, which everything else (including
   * the pkey code) should treat as opaque: making it really opaque
   * would complicate memory allocation and isn't worth it for an
   * internal API.
   */

  /*
   * This might be where we'd stash a (hal_core_t *) pointing to a
   * core which has already been loaded with the key, if we were
   * trying to be clever about using multiple signing cores.  Moot
   * point (ie, no way we could possibly test such a thing) as long as
   * the FPGA is too small to hold more than one modexp core and ECDSA
   * is entirely software, so skip it for now, but the implied
   * semantics are interesting: a pkey handle starts to resemble an
   * initialized signing core, and once all the cores are in use, one
   * can't load another key without closing an existing pkey handle.
   */
} hal_pkey_slot_t;

typedef struct hal_ks_driver hal_ks_driver_t;

typedef struct hal_ks hal_ks_t;

struct hal_ks_driver {

  hal_error_t (*init)(const hal_ks_driver_t * const driver);

  hal_error_t (*shutdown)(const hal_ks_driver_t * const driver);

  hal_error_t (*open)(const hal_ks_driver_t * const driver,
                      hal_ks_t **ks);

  hal_error_t (*close)(hal_ks_t *ks);

  hal_error_t (*store)(hal_ks_t *ks,
                       const hal_pkey_slot_t * const slot,
		       const uint8_t * const der,  const size_t der_len);

  hal_error_t (*fetch)(hal_ks_t *ks,
                       hal_pkey_slot_t *slot,
		       uint8_t *der, size_t *der_len, const size_t der_max);

  hal_error_t (*delete)(hal_ks_t *ks,
                        const hal_pkey_slot_t * const slot);

  hal_error_t (*list)(hal_ks_t *ks,
		      hal_pkey_info_t *result,
		      unsigned *result_len,
		      const unsigned result_max);
};


struct hal_ks {
  const hal_ks_driver_t *driver;
  /*
   * Any other common portions of hal_ks_t go here.
   */

  /*
   * Driver-specific stuff is handled by a form of subclassing:
   * driver module embeds this structure at the head of whatever
   * else it needs, and performs casts as needed.
   */
};

extern const hal_ks_driver_t
   hal_ks_volatile_driver[1],
   hal_ks_token_driver[1];

static inline hal_error_t hal_ks_init(const hal_ks_driver_t * const driver)
{
  if (driver == NULL || driver->init == NULL)
    return HAL_ERROR_BAD_ARGUMENTS;

  return driver->init(driver);
}

static inline hal_error_t hal_ks_shutdown(const hal_ks_driver_t * const driver)
{
  if (driver == NULL || driver->shutdown == NULL)
    return HAL_ERROR_BAD_ARGUMENTS;

  return driver->shutdown(driver);
}

static inline hal_error_t hal_ks_open(const hal_ks_driver_t * const driver,
			       hal_ks_t **ks)
{
  if (driver == NULL || driver->open == NULL || ks == NULL)
    return HAL_ERROR_BAD_ARGUMENTS;

  return driver->open(driver, ks);
}

static inline hal_error_t hal_ks_close(hal_ks_t *ks)
{
  if (ks == NULL || ks->driver == NULL || ks->driver->close == NULL)
    return HAL_ERROR_BAD_ARGUMENTS;

  return ks->driver->close(ks);
}

static inline hal_error_t hal_ks_store(hal_ks_t *ks,
                                       hal_pkey_slot_t *slot,
                                       const uint8_t * const der,  const size_t der_len)
{
  if (ks == NULL || ks->driver == NULL || ks->driver->store == NULL || slot == NULL || der == NULL)
    return HAL_ERROR_BAD_ARGUMENTS;

  return ks->driver->store(ks, slot, der, der_len);
}

static inline hal_error_t hal_ks_fetch(hal_ks_t *ks,
                                       hal_pkey_slot_t *slot,
                                       uint8_t *der, size_t *der_len, const size_t der_max)
{
  if (ks == NULL || ks->driver == NULL || ks->driver->fetch == NULL || slot == NULL)
    return HAL_ERROR_BAD_ARGUMENTS;

  return ks->driver->fetch(ks, slot, der, der_len, der_max);
}

static inline hal_error_t hal_ks_delete(hal_ks_t *ks,
                                        hal_pkey_slot_t *slot)
{
  if (ks == NULL || ks->driver == NULL || ks->driver->delete == NULL || slot == NULL)
    return HAL_ERROR_BAD_ARGUMENTS;

  return ks->driver->delete(ks, slot);
}

static inline hal_error_t hal_ks_list(hal_ks_t *ks,
                                      hal_pkey_info_t *result,
                                      unsigned *result_len,
                                      const unsigned result_max)
{
  if (ks == NULL || ks->driver == NULL || ks->driver->list == NULL)
    return HAL_ERROR_BAD_ARGUMENTS;

  return ks->driver->list(ks, result, result_len, result_max);
}

/*
 * Keystore index.  This is intended to be usable by both memory-based
 * (in-memory, mmap(), ...) keystores and keystores based on raw flash.
 * Some of the features aren't really necessary for memory-based keystores,
 * but should be harmless.
 *
 * General approach is multiple arrays, all but one of which are
 * indexed by "block" numbers, where a block number might be a slot in
 * yet another static array, the number of a flash sub-sector, or
 * whatever is the appropriate unit for holding one keystore record.
 *
 * The index array contains nothing but flags and block numbers, and
 * is deliberately a small data structure so that moving data around
 * within it is relatively cheap.
 *
 * The index array is divided into two portions: the index proper, and
 * the free queue.  The index proper is ordered according to the names
 * (UUIDs) of the corresponding blocks; the free queue is a FIFO, to
 * support a simplistic form of wear leveling in flash-based keystores.
 *
 * Key names are kept in a separate array, indexed by block number.
 *
 * The all-ones UUID, which (by definition) cannot be a valid key
 * UUID, is reserved for the (non-key) block used to stash PINs and
 * other small data which aren't really part of the keystore proper
 * but are kept with it because the keystore is the flash we have.
 *
 * At the moment, this design leaves no room for "continuation" blocks
 * (additional blocks for keys so large that they won't fit in a
 * single flash sub-sector, or whatever).  Not sure we need that, but
 * if we do, adding it would be fairly simple: change the keyname
 * array to be an array of two-element structures, the first of which
 * is the name UUID, the second of which is the offset within the
 * series of blocks sharing that name (usually just one block, so the
 * offset would usually just be zero).  Implement that if and when we
 * need it.
 *
 * Note that this API deliberately says nothing about how the keys
 * themselves are stored, that's up to the keystore driver.  This
 * portion of the API is only concerned with allocation and naming.
 */

typedef struct {
  unsigned size;                /* Array length */
  unsigned used;                /* How many blocks are in use */
  uint16_t *index;              /* Index/freelist array */
  hal_uuid_t *names;            /* Keyname array */
} hal_ks_index_t;

/*
 * Finish setting up key index.  Caller must populate index, free
 * list, and name array.
 *
 * This function checks a few things then sorts the index proper.
 *
 * If driver cares about wear leveling, driver must supply the free
 * list in the desired order (FIFO); figuring out what that order is a
 * problem for the keystore driver.
 */
extern hal_error_t hal_ks_index_setup(hal_ks_index_t *ksi);

/*
 * Find a key block, return its block number.
 */
extern hal_error_t hal_ks_index_find(hal_ks_index_t *ksi,
                                     const hal_uuid_t * const name,
                                     unsigned *blockno);

/*
 * Add a key block, return its block number.
 */
extern hal_error_t hal_ks_index_add(hal_ks_index_t *ksi,
                                    const hal_uuid_t * const name,
                                    unsigned *blockno);

/*
 * Delete a key block, returns its block number (driver may need it).
 */
extern hal_error_t hal_ks_index_delete(hal_ks_index_t *ksi,
                                       const hal_uuid_t * const name,
                                       unsigned *blockno);

/*
 * RPC lowest-level send and receive routines. These are blocking, and
 * transport-specific (sockets, USB).
 */

extern hal_error_t hal_rpc_send(const uint8_t * const buf, const size_t len);
extern hal_error_t hal_rpc_recv(uint8_t * const buf, size_t * const len);

extern hal_error_t hal_rpc_sendto(const uint8_t * const buf, const size_t len, void *opaque);
extern hal_error_t hal_rpc_recvfrom(uint8_t * const buf, size_t * const len, void **opaque);

extern hal_error_t hal_rpc_client_transport_init(void);
extern hal_error_t hal_rpc_client_transport_close(void);

extern hal_error_t hal_rpc_server_transport_init(void);
extern hal_error_t hal_rpc_server_transport_close(void);


/*
 * RPC function numbers
 */

typedef enum {
    RPC_FUNC_GET_VERSION = 0,
    RPC_FUNC_GET_RANDOM,
    RPC_FUNC_SET_PIN,
    RPC_FUNC_LOGIN,
    RPC_FUNC_LOGOUT,
    RPC_FUNC_LOGOUT_ALL,
    RPC_FUNC_IS_LOGGED_IN,
    RPC_FUNC_HASH_GET_DIGEST_LEN,
    RPC_FUNC_HASH_GET_DIGEST_ALGORITHM_ID,
    RPC_FUNC_HASH_GET_ALGORITHM,
    RPC_FUNC_HASH_INITIALIZE,
    RPC_FUNC_HASH_UPDATE,
    RPC_FUNC_HASH_FINALIZE,
    RPC_FUNC_PKEY_LOAD,
    RPC_FUNC_PKEY_FIND,
    RPC_FUNC_PKEY_GENERATE_RSA,
    RPC_FUNC_PKEY_GENERATE_EC,
    RPC_FUNC_PKEY_CLOSE,
    RPC_FUNC_PKEY_DELETE,
    RPC_FUNC_PKEY_GET_KEY_TYPE,
    RPC_FUNC_PKEY_GET_KEY_FLAGS,
    RPC_FUNC_PKEY_GET_PUBLIC_KEY_LEN,
    RPC_FUNC_PKEY_GET_PUBLIC_KEY,
    RPC_FUNC_PKEY_SIGN,
    RPC_FUNC_PKEY_VERIFY,
    RPC_FUNC_PKEY_LIST,
    RPC_FUNC_PKEY_RENAME,
} rpc_func_num_t;

#define RPC_VERSION 0x01010000          /* 1.1.0.0 */

/*
 * RPC client locality. These have to be defines rather than an enum,
 * because they're handled by the preprocessor.
 */

#define RPC_CLIENT_LOCAL        0
#define RPC_CLIENT_REMOTE       1
#define RPC_CLIENT_MIXED        2
#define RPC_CLIENT_NONE         3

/*
 * Maximum size of a HAL RPC packet.
 */

#ifndef HAL_RPC_MAX_PKT_SIZE
#define HAL_RPC_MAX_PKT_SIZE    4096
#endif

/*
 * Location of AF_UNIX socket for RPC client mux daemon.
 */

#ifndef HAL_CLIENT_DAEMON_DEFAULT_SOCKET_NAME
#define HAL_CLIENT_DAEMON_DEFAULT_SOCKET_NAME   "/tmp/cryptech_rpcd.socket"
#endif

/*
 * Default device name and line speed for HAL RPC serial connection to HSM.
 */

#ifndef HAL_CLIENT_SERIAL_DEFAULT_DEVICE
#define HAL_CLIENT_SERIAL_DEFAULT_DEVICE 	"/dev/ttyUSB0"
#endif

#ifndef HAL_CLIENT_SERIAL_DEFAULT_SPEED
#define HAL_CLIENT_SERIAL_DEFAULT_SPEED         921600
#endif

/*
 * Names of environment variables for setting the above in RPC clients.
 */

#define	HAL_CLIENT_SERIAL_DEVICE_ENVVAR		"CRYPTECH_RPC_CLIENT_SERIAL_DEVICE"
#define	HAL_CLIENT_SERIAL_SPEED_ENVVAR		"CRYPTECH_RPC_CLIENT_SERIAL_SPEED"

#endif /* _HAL_INTERNAL_H_ */

/*
 * Local variables:
 * indent-tabs-mode: nil
 * End:
 */