/*
* cryptech_novena_eim_trng.c
* --------------------------
*
* This is a prototype Hardware Adaption Layer (HAL) for using
* Cryptlib with the Cryptech project's FGPA cores over an EIM bus on
* the Novena PVT1 development board.
*
* Authors: Joachim Strömbergson, Paul Selkirk, Rob Austein
* Copyright (c) 2014-2015, SUNET
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* The HAL framework is taken from the Cryptlib hw_dummy.c template,
* and is Copyright 1998-2009 by Peter Gutmann.
*/
#include <assert.h>
#include <string.h>
#include <stdio.h>
#include <stdlib.h>
#include <errno.h>
#include <fcntl.h>
#include <unistd.h>
#include <sys/ioctl.h>
#include <stdint.h>
#if defined( INC_ALL )
#include "crypt.h"
#include "context.h"
#include "hardware.h"
#else
#include "crypt.h"
#include "context/context.h"
#include "device/hardware.h"
#endif /* Compiler-specific includes */
#include <cryptech.h>
#ifdef USE_HARDWARE
/* Longest digest block we support at the moment */
#define MAX_BLOCK_LEN SHA512_BLOCK_LEN
/* Hash state */
typedef struct {
unsigned long long msg_length_high; /* Total data hashed in this message */
unsigned long long msg_length_low; /* (128 bits in SHA-512 cases) */
size_t block_length; /* Block length for this algorithm */
unsigned char block[MAX_BLOCK_LEN]; /* Block we're accumulating */
size_t block_used; /* How much of the block we've used */
unsigned block_count; /* Blocks sent */
} hash_state_t;
int debug = 0;
/****************************************************************************
* *
* Hash utilities *
* *
****************************************************************************/
/*
* Send one block to a core.
*/
static int hash_write_block(const off_t offset,
const uint8_t ctrl_mode,
const hash_state_t *state)
{
uint8_t ctrl_cmd[4] = { 0 };
off_t base = offset & ~(0x3ff);
assert(state != NULL && state->block_length % 4 == 0);
if (tc_write(offset, state->block, state->block_length) != 0)
return CRYPT_ERROR_FAILED;
ctrl_cmd[3] = (state->block_count == 0 ? CTRL_INIT_CMD : CTRL_NEXT_CMD) | ctrl_mode;
if (debug)
fprintf(stderr, "[ %s ]\n", state->block_count == 0 ? "init" : "next");
return
tc_write(base + ADDR_CTRL, ctrl_cmd, 4) ||
tc_wait_ready(base + ADDR_STATUS);
}
/*
* Read hash result from core.
*/
static int hash_read_digest(const off_t offset,
unsigned char *digest,
const size_t digest_length)
{
assert(digest_length % 4 == 0);
/* Technically, we should poll the status register for the "valid" bit, but
* hash_write_block() has already polled for the "ready" bit, and we know
* that the sha cores always set valid one clock cycle before ready.
*/
return tc_read(offset, digest, digest_length);
}
/****************************************************************************
* *
* Random Numbers *
* *
****************************************************************************/
/*
* First attempt at reading random data from the Novena.
*/
static int readRandom(void *buffer, const int length)
{
unsigned char temp[4], *buf = buffer;
int i, last;
if (debug)
fprintf(stderr, "[ Requesting %d bytes of random data ]\n", length);
assert(isWritePtr(buffer, length));
REQUIRES_B(length >= 1 && length < MAX_INTLENGTH);
for (i = 0; i < length; i += 4) {
if (tc_wait_ready(CSPRNG_ADDR_STATUS) != 0) {
fprintf(stderr, "[ tc_wait_valid(CSPRNG_ADDR_STATUS) failed ]\n");
return CRYPT_ERROR_FAILED;
}
last = (length - i) < 4;
if (tc_read(CSPRNG_ADDR_RANDOM, (last ? temp : (buf + i)), 4) != 0) {
fprintf(stderr, "[ tc_read(CSPRNG_ADDR_RANDOM) failed ]\n");
return CRYPT_ERROR_FAILED;
}
if (last) {
for (; i < length; i++)
buf[i] = temp[i & i];
}
}
for (i = 0, buf = buffer; i < length; i++, buf++)
if (*buf != 0)
return CRYPT_OK;
fprintf(stderr, "[ \"Random\" data all zeros, guess TRNG is not installed ]\n");
return CRYPT_ERROR_FAILED;
}
/****************************************************************************
* *
* Hash/MAC Capability Interface Routines *
* *
****************************************************************************/
/*
* Return context subtype-specific information. All supported hash
* algorithms currently use the same state object, so they can all use
* this method.
*/
static int hashGetInfo(const CAPABILITY_INFO_TYPE type,
CONTEXT_INFO *contextInfoPtr,
void *data, const int length)
{
switch (type) {
case CAPABILITY_INFO_STATESIZE:
/*
* Tell cryptlib how much hash-state storage we want allocated.
*/
*(int *) data = sizeof(hash_state_t);
return CRYPT_OK;
default:
return getDefaultInfo(type, contextInfoPtr, data, length);
}
}
/*
* Hash data. All supported hash algorithms use similar block
* manipulations and padding algorithms, so all can use this method
* with a few parameters which we handle via closures below.
*/
static int doHash(CONTEXT_INFO *contextInfoPtr,
const unsigned char *buffer,
int length,
const size_t block_length,
const off_t addr_block,
const size_t digest_length,
const off_t addr_digest,
const unsigned char ctrl_mode,
const size_t length_length)
{
hash_state_t *state = NULL;
size_t n;
int i;
assert(isWritePtr(contextInfoPtr, sizeof(CONTEXT_INFO)));
assert(length == 0 || isWritePtr(buffer, length));
state = (hash_state_t *) contextInfoPtr->ctxHash->hashInfo;
/*
* If the hash state was reset to allow another round of hashing,
* reinitialise things.
*/
if (!(contextInfoPtr->flags & CONTEXT_FLAG_HASH_INITED)) {
memset(state, 0, sizeof(*state));
state->block_length = block_length;
}
/* May want an assertion here that state->block_length is correct */
if (length > 0) { /* More data to hash */
const unsigned char *p = buffer;
while ((n = state->block_length - state->block_used) <= length) {
/*
* We have enough data for another complete block.
*/
if (debug)
fprintf(stderr, "[ Full block, length %lu, used %lu, n %lu, msg_length %llu ]\n",
(unsigned long) length, (unsigned long) state->block_used, (unsigned long) n, state->msg_length_low);
memcpy(state->block + state->block_used, p, n);
if ((state->msg_length_low += n) < n)
state->msg_length_high++;
state->block_used = 0;
length -= n;
p += n;
if (hash_write_block(addr_block, ctrl_mode, state) != 0)
return CRYPT_ERROR_FAILED;
state->block_count++;
}
if (length > 0) {
/*
* Data left over, but not enough for a full block, stash it.
*/
if (debug)
fprintf(stderr, "[ Partial block, length %lu, used %lu, n %lu, msg_length %llu ]\n",
(unsigned long) length, (unsigned long) state->block_used, (unsigned long) n, state->msg_length_low);
assert(length < n);
memcpy(state->block + state->block_used, p, length);
if ((state->msg_length_low += length) < length)
state->msg_length_high++;
state->block_used += length;
}
}
else { /* Done: add padding, then pull result from chip */
unsigned long long bit_length_low = (state->msg_length_low << 3);
unsigned long long bit_length_high = (state->msg_length_high << 3) | (state->msg_length_low >> 61);
unsigned char *p;
/* Initial pad byte */
assert(state->block_used < state->block_length);
state->block[state->block_used++] = 0x80;
/* If not enough room for bit count, zero and push current block */
if ((n = state->block_length - state->block_used) < length_length) {
if (debug)
fprintf(stderr, "[ Overflow block, length %lu, used %lu, n %lu, msg_length %llu ]\n",
(unsigned long) length, (unsigned long) state->block_used, (unsigned long) n, state->msg_length_low);
if (n > 0)
memset(state->block + state->block_used, 0, n);
if (hash_write_block(addr_block, ctrl_mode, state) != 0)
return CRYPT_ERROR_FAILED;
state->block_count++;
state->block_used = 0;
}
/* Pad final block */
n = state->block_length - state->block_used;
assert(n >= length_length);
if (n > 0)
memset(state->block + state->block_used, 0, n);
if (debug)
fprintf(stderr, "[ Final block, length %lu, used %lu, n %lu, msg_length %llu ]\n",
(unsigned long) length, (unsigned long) state->block_used, (unsigned long) n, state->msg_length_low);
p = state->block + state->block_length;
for (i = 0; (bit_length_low || bit_length_high) && i < length_length; i++) {
*--p = (unsigned char) (bit_length_low & 0xFF);
bit_length_low >>= 8;
if (bit_length_high) {
bit_length_low |= ((bit_length_high & 0xFF) << 56);
bit_length_high >>= 8;
}
}
/* Push final block */
if (hash_write_block(addr_block, ctrl_mode, state) != 0)
return CRYPT_ERROR_FAILED;
state->block_count++;
/* All data pushed to core, now we just need to read back the result */
assert(digest_length <= sizeof(contextInfoPtr->ctxHash->hash));
if (hash_read_digest(addr_digest, contextInfoPtr->ctxHash->hash, digest_length) != 0)
return CRYPT_ERROR_FAILED;
}
return CRYPT_OK;
}
/* Perform a self-test */
static int sha1SelfTest(void)
{
/*
* If we think of a self-test, insert it here.
*/
return CRYPT_OK;
}
/* Hash data */
static int sha1Hash(CONTEXT_INFO *contextInfoPtr, unsigned char *buffer, int length)
{
return doHash(contextInfoPtr, buffer, length,
SHA1_BLOCK_LEN, SHA1_ADDR_BLOCK,
SHA1_DIGEST_LEN, SHA1_ADDR_DIGEST, 0, SHA1_LENGTH_LEN);
}
/* Perform a self-test */
static int sha2SelfTest(void)
{
/*
* If we think of a self-test, insert it here.
*/
return CRYPT_OK;
}
/* Hash data */
static int sha2Hash(CONTEXT_INFO *contextInfoPtr, unsigned char *buffer, int length)
{
assert(contextInfoPtr != NULL && contextInfoPtr->capabilityInfo != NULL);
switch (contextInfoPtr->capabilityInfo->blockSize) {
case bitsToBytes(256):
return doHash(contextInfoPtr, buffer, length,
SHA256_BLOCK_LEN, SHA256_ADDR_BLOCK,
SHA256_DIGEST_LEN, SHA256_ADDR_DIGEST, 0, SHA256_LENGTH_LEN);
case bitsToBytes(384):
return doHash(contextInfoPtr, buffer, length,
SHA512_BLOCK_LEN, SHA512_ADDR_BLOCK,
SHA384_DIGEST_LEN, SHA512_ADDR_DIGEST, MODE_SHA_384,
SHA512_LENGTH_LEN);
case bitsToBytes(512):
return doHash(contextInfoPtr, buffer, length,
SHA512_BLOCK_LEN, SHA512_ADDR_BLOCK,
SHA512_DIGEST_LEN, SHA512_ADDR_DIGEST, MODE_SHA_512,
SHA512_LENGTH_LEN);
default:
return CRYPT_ERROR_FAILED;
}
}
/* Parameter initialization, to handle SHA-2 algorithms other than SHA-256 */
static int sha2InitParams(INOUT CONTEXT_INFO *contextInfoPtr,
IN_ENUM(KEYPARAM) const KEYPARAM_TYPE paramType,
IN_OPT const void *data,
IN_INT const int dataLength)
{
static const CAPABILITY_INFO capabilityInfoSHA384 = {
CRYPT_ALGO_SHA2, bitsToBytes( 384 ), "SHA-384", 7,
bitsToBytes( 0 ), bitsToBytes( 0 ), bitsToBytes( 0 ),
sha2SelfTest, hashGetInfo, NULL, NULL, NULL, NULL, sha2Hash, sha2Hash
};
static const CAPABILITY_INFO capabilityInfoSHA512 = {
CRYPT_ALGO_SHA2, bitsToBytes( 512 ), "SHA-512", 7,
bitsToBytes( 0 ), bitsToBytes( 0 ), bitsToBytes( 0 ),
sha2SelfTest, hashGetInfo, NULL, NULL, NULL, NULL, sha2Hash, sha2Hash
};
assert(isWritePtr(contextInfoPtr, sizeof(CONTEXT_INFO)));
REQUIRES(contextInfoPtr->type == CONTEXT_HASH);
REQUIRES(paramType > KEYPARAM_NONE && paramType < KEYPARAM_LAST);
if (paramType == KEYPARAM_BLOCKSIZE) {
switch (dataLength) {
case bitsToBytes(256):
return CRYPT_OK;
case bitsToBytes(384):
contextInfoPtr->capabilityInfo = &capabilityInfoSHA384;
return CRYPT_OK;
case bitsToBytes(512):
contextInfoPtr->capabilityInfo = &capabilityInfoSHA512;
return CRYPT_OK;
default:
return CRYPT_ARGERROR_NUM1;
}
}
return initGenericParams(contextInfoPtr, paramType, data, dataLength);
}
/****************************************************************************
* *
* Hardware External Interface *
* *
****************************************************************************/
/* The capability information for this device */
static const CAPABILITY_INFO capabilities[] = {
{ CRYPT_ALGO_SHA1, bitsToBytes( 160 ), "SHA-1", 5,
bitsToBytes( 0 ), bitsToBytes( 0 ), bitsToBytes( 0 ),
sha1SelfTest, hashGetInfo, NULL, NULL, NULL, NULL, sha1Hash, sha1Hash },
{ CRYPT_ALGO_SHA2, bitsToBytes( 256 ), "SHA-2", 5,
bitsToBytes( 0 ), bitsToBytes( 0 ), bitsToBytes( 0 ),
sha2SelfTest, hashGetInfo, NULL, sha2InitParams, NULL, NULL, sha2Hash, sha2Hash },
{ CRYPT_ALGO_NONE }, { CRYPT_ALGO_NONE }
};
/* Return the hardware capabilities list */
int hwGetCapabilities(const CAPABILITY_INFO **capabilityInfo, int *noCapabilities)
{
assert(isReadPtr(capabilityInfo, sizeof(CAPABILITY_INFO *)));
assert(isWritePtr(noCapabilities, sizeof(int)));
*capabilityInfo = capabilities;
*noCapabilities = FAILSAFE_ARRAYSIZE(capabilities, CAPABILITY_INFO);
return CRYPT_OK;
}
/*
* Get random data from the hardware.
*
* So, we provide this function because the Cryptlib HAL API seems to
* require it, but as far as I can tell nothing ever calls it. Hmm.
* See src/cryptech_random.c for how I'm using this to feed Cryptlib's
* CSPRNG. Bypassing the CSPRNG would be, well, not hard exactly, but
* would require somewhat drastic surgery, so I'm leaving that for
* another day.
*/
int hwGetRandom(void *buffer, const int length)
{
if (debug)
fprintf(stderr, "[ Requested %d bytes of random data]\n", length);
assert(isWritePtr(buffer, length));
REQUIRES(length >= 1 && length < MAX_INTLENGTH);
return readRandom(buffer, length);
}
/*
* These "personality" methods are trivial stubs, as we do not yet
* have any cores which do encyrption or signature. When we do, these
* methods will need to be rewritten, and whoever does that rewriting
* will definitely want to look at the detailed comments and template
* code in device/hw_dummy.c.
*/
/* Look up an item held in the hardware */
int hwLookupItem(const void *keyID, const int keyIDlength, int *keyHandle)
{
assert(keyHandle != NULL);
*keyHandle = CRYPT_ERROR;
return CRYPT_ERROR_NOTFOUND;
}
/* Delete an item held in the hardware */
int hwDeleteItem(const int keyHandle)
{
return CRYPT_OK;
}
/* Initialise/zeroise the hardware */
int hwInitialise(void)
{
if (debug)
fprintf(stderr, "[ Initializing cryptech hardware ]\n");
return CRYPT_OK;
}
#endif /* USE_HARDWARE */
/*
* "Any programmer who fails to comply with the standard naming, formatting,
* or commenting conventions should be shot. If it so happens that it is
* inconvenient to shoot him, then he is to be politely requested to recode
* his program in adherence to the above standard."
* -- Michael Spier, Digital Equipment Corporation
*
* Local variables:
* indent-tabs-mode: nil
* End:
*/