//======================================================================
//
// tb_mixer.v
// -----------
// Testbench for the mixer module in the trng.
//
//
// Author: Joachim Strombergson
// Copyright (c) 2014, NORDUnet A/S All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
// - Redistributions of source code must retain the above copyright notice,
// this list of conditions and the following disclaimer.
//
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the distribution.
//
// - Neither the name of the NORDUnet nor the names of its contributors may
// be used to endorse or promote products derived from this software
// without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
//======================================================================
//------------------------------------------------------------------
// Simulator directives.
//------------------------------------------------------------------
`timescale 1ns/100ps
//------------------------------------------------------------------
// Test module.
//------------------------------------------------------------------
module tb_mixer();
//----------------------------------------------------------------
// Internal constant and parameter definitions.
//----------------------------------------------------------------
parameter DEBUG = 1;
parameter CLK_HALF_PERIOD = 1;
parameter CLK_PERIOD = 2 * CLK_HALF_PERIOD;
//----------------------------------------------------------------
// Register and Wire declarations.
//----------------------------------------------------------------
reg [31 : 0] cycle_ctr;
reg [31 : 0] error_ctr;
reg [31 : 0] tc_ctr;
reg tb_clk;
reg tb_reset_n;
reg tb_enable;
//----------------------------------------------------------------
// Device Under Test.
//----------------------------------------------------------------
trng_mixer dut(
.clk(tb_clk),
.reset_n(tb_reset_n),
.enable(),
.more_seed(),
.entropy0_enabled(),
.entropy0_syn(),
.entropy0_ack(),
.entropy1_enabled(),
.entropy1_syn(),
.entropy1_ack(),
.entropy2_enabled(),
.entropy2_syn(),
.entropy2_ack(),
.seed_data(),
.seed_syn(),
.seed_ack()
);
//----------------------------------------------------------------
// clk_gen
//
// Always running clock generator process.
//----------------------------------------------------------------
always
begin : clk_gen
#CLK_HALF_PERIOD;
tb_clk = !tb_clk;
end // clk_gen
//----------------------------------------------------------------
// sys_monitor()
//
// An always running process that creates a cycle counter and
// conditionally displays information about the DUT.
//----------------------------------------------------------------
always
begin : sys_monitor
cycle_ctr = cycle_ctr + 1;
#(CLK_PERIOD);
if (DEBUG)
begin
dump_dut_state();
end
end
//----------------------------------------------------------------
// dump_dut_state()
//
// Dump the state of the dump when needed.
//----------------------------------------------------------------
task dump_dut_state();
begin
$display("cycle: 0x%016x", cycle_ctr);
$display("State of DUT");
$display("------------");
$display("");
end
endtask // dump_dut_state
//----------------------------------------------------------------
// reset_dut()
//
// Toggle reset to put the DUT into a well known state.
//----------------------------------------------------------------
task reset_dut();
begin
$display("*** Toggle reset.");
tb_reset_n = 0;
#(2 * CLK_PERIOD);
tb_reset_n = 1;
$display("");
end
endtask // reset_dut
//----------------------------------------------------------------
// display_test_results()
//
// Display the accumulated test results.
//----------------------------------------------------------------
task display_test_results();
begin
if (error_ctr == 0)
begin
$display("*** All %02d test cases completed successfully", tc_ctr);
end
else
begin
$display("*** %02d tests completed - %02d test cases did not complete successfully.",
tc_ctr, error_ctr);
end
end
endtask // display_test_results
//----------------------------------------------------------------
// init_sim()
//
// Initialize all counters and testbed functionality as well
// as setting the DUT inputs to defined values.
//----------------------------------------------------------------
task init_sim();
begin
cycle_ctr = 0;
error_ctr = 0;
tc_ctr = 0;
tb_clk = 0;
tb_reset_n = 1;
tb_enable = 0;
end
endtask // init_sim
//----------------------------------------------------------------
// mixer_test
//
// The main test functionality.
//----------------------------------------------------------------
initial
begin : mixer_test
$display(" -= Testbench for mixer started =-");
$display(" ================================");
$display("");
init_sim();
dump_dut_state();
reset_dut();
dump_dut_state();
display_test_results();
$display("");
$display("*** Mixer simulation done. ***");
$finish;
end // mixer_test
endmodule // tb_mixer
//======================================================================
// EOF tb_mixer.v
//======================================================================