diff options
author | Joachim StroĢmbergson <joachim@secworks.se> | 2014-09-26 14:43:22 +0200 |
---|---|---|
committer | Joachim StroĢmbergson <joachim@secworks.se> | 2014-09-26 14:43:22 +0200 |
commit | d72ae3402000556cbf17d9859a8ff7df8db58474 (patch) | |
tree | 6177e35960dc1944ebeb5dbd2ce67e053fb2786f /src/rtl | |
parent | 208ada49114a58d968021c53ff9e50616222fef3 (diff) |
Update efter synthesis. Adding a top level wrapper.
Diffstat (limited to 'src/rtl')
-rw-r--r-- | src/rtl/avalanche_entropy.v | 380 |
1 files changed, 380 insertions, 0 deletions
diff --git a/src/rtl/avalanche_entropy.v b/src/rtl/avalanche_entropy.v new file mode 100644 index 0000000..a7a23b1 --- /dev/null +++ b/src/rtl/avalanche_entropy.v @@ -0,0 +1,380 @@ +//====================================================================== +// +// avalanche_entropy.v +// ------------------- +// Top level wrapper of the entropy provider core based on an external +// avalanche noise based source. (or any other source that can +// toggle a single bit input). +// +// Currently the design consists of a free running counter. At every +// positive flank detected the LSB of the counter is pushed into +// a 32bit shift register. +// +// +// Author: Joachim Strombergson +// Copyright (c) 2013, 2014, Secworks Sweden AB +// All rights reserved. +// +// Redistribution and use in source and binary forms, with or +// without modification, are permitted provided that the following +// conditions are met: +// +// 1. Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// 2. Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in +// the documentation and/or other materials provided with the +// distribution. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +// FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +// COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +// INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +// BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +// LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER +// CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, +// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +// ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +//====================================================================== + +module avalanche_entropy( + input wire clk, + input wire reset_n, + + input wire noise, + + input wire cs, + input wire we, + input wire [7 : 0] address, + input wire [31 : 0] write_data, + output wire [31 : 0] read_data, + output wire error, + + input wire discard, + input wire test_mode, + output wire security_error, + + output wire entropy_enabled, + output wire [31 : 0] entropy_data, + output wire entropy_valid, + input wire entropy_ack, + + output wire [7 : 0] debug, + input wire debug_update + ); + + + //---------------------------------------------------------------- + // Internal constant and parameter definitions. + //---------------------------------------------------------------- + parameter ADDR_CTRL = 8'h10; + parameter CTRL_ENABLE_BIT = 0; + + parameter ADDR_STATUS = 8'h11; + parameter ADDR_ENTROPY = 8'h20; + parameter ADDR_DELTA = 8'h30; + + parameter DEBUG_DELAY = 32'h002c4b40; + + + //---------------------------------------------------------------- + // Registers including update variables and write enable. + //---------------------------------------------------------------- + reg noise_sample0_reg; + reg noise_sample_reg; + + reg flank0_reg; + reg flank1_reg; + + reg entropy_bit_reg; + + reg [31 : 0] entropy_reg; + reg [31 : 0] entropy_new; + reg entropy_we; + + reg entropy_syn_reg; + reg entropy_syn_new; + + reg [5 : 0] bit_ctr_reg; + reg [5 : 0] bit_ctr_new; + reg bit_ctr_inc; + reg bit_ctr_we; + + reg [31 : 0] cycle_ctr_reg; + reg [31 : 0] cycle_ctr_new; + + reg [31 : 0] delta_reg; + reg delta_we; + + reg enable_reg; + reg enable_new; + reg enable_we; + + reg [31 : 0] debug_delay_ctr_reg; + reg [31 : 0] debug_delay_ctr_new; + reg debug_delay_ctr_we; + + reg [7 : 0] debug_reg; + reg debug_we; + + reg debug_update_reg; + + + //---------------------------------------------------------------- + // Wires. + //---------------------------------------------------------------- + reg [31 : 0] tmp_read_data; + reg tmp_error; + + + //---------------------------------------------------------------- + // Concurrent connectivity for ports etc. + //---------------------------------------------------------------- + assign read_data = tmp_read_data; + assign error = tmp_error; + assign security_error = 0; + + assign entropy_valid = entropy_syn_reg; + assign entropy_data = entropy_reg; + assign entropy_enabled = enable_reg; + + assign debug = debug_reg; + + + //---------------------------------------------------------------- + // reg_update + //---------------------------------------------------------------- + always @ (posedge clk or negedge reset_n) + begin + if (!reset_n) + begin + noise_sample0_reg <= 1'b0; + noise_sample_reg <= 1'b0; + flank0_reg <= 1'b0; + flank1_reg <= 1'b0; + entropy_syn_reg <= 1'b0; + entropy_reg <= 32'h00000000; + entropy_bit_reg <= 1'b0; + bit_ctr_reg <= 6'h00; + cycle_ctr_reg <= 32'h00000000; + delta_reg <= 32'h00000000; + enable_reg <= 1; + debug_delay_ctr_reg <= 32'h00000000; + debug_reg <= 8'h00; + debug_update_reg <= 0; + end + else + begin + noise_sample0_reg <= noise; + noise_sample_reg <= noise_sample0_reg; + + flank0_reg <= noise_sample_reg; + flank1_reg <= flank0_reg; + + entropy_syn_reg <= entropy_syn_new; + entropy_bit_reg <= ~entropy_bit_reg; + cycle_ctr_reg <= cycle_ctr_new; + + debug_update_reg <= debug_update; + + if (enable_we) + begin + enable_reg <= enable_new; + end + + if (delta_we) + begin + delta_reg <= cycle_ctr_reg; + end + + if (bit_ctr_we) + begin + bit_ctr_reg <= bit_ctr_new; + end + + if (entropy_we) + begin + entropy_reg <= entropy_new; + end + + if (debug_delay_ctr_we) + begin + debug_delay_ctr_reg <= debug_delay_ctr_new; + end + + if (debug_we) + begin + debug_reg <= entropy_reg[7 : 0]; + end + end + end // reg_update + + + //---------------------------------------------------------------- + // debug_out + // + // Logic that updates the debug port. + //---------------------------------------------------------------- + always @* + begin : debug_out + debug_delay_ctr_new = 8'h00000000; + debug_delay_ctr_we = 0; + debug_we = 0; + + if (debug_update_reg) + begin + debug_delay_ctr_new = debug_delay_ctr_reg + 1'b1; + debug_delay_ctr_we = 1; + end + + if (debug_delay_ctr_reg == DEBUG_DELAY) + begin + debug_delay_ctr_new = 8'h00000000; + debug_delay_ctr_we = 1; + debug_we = 1; + end + end + + + //---------------------------------------------------------------- + // entropy_collect + // + // We collect entropy by adding the current state of the + // entropy bit register the entropy shift register every time + // we detect a positive flank in the noise source. + //---------------------------------------------------------------- + always @* + begin : entropy_collect + entropy_new = 32'h00000000; + entropy_we = 1'b0; + bit_ctr_inc = 1'b0; + + if ((flank0_reg) && (!flank1_reg)) + begin + entropy_new = {entropy_reg[30 : 0], entropy_bit_reg}; + entropy_we = 1'b1; + bit_ctr_inc = 1'b1; + end + end // entropy_collect + + + //---------------------------------------------------------------- + // delta_logic + // + // The logic implements the delta time measuerment system. + //---------------------------------------------------------------- + always @* + begin : delta_logic + cycle_ctr_new = cycle_ctr_reg + 1'b1; + delta_we = 1'b0; + + if ((flank0_reg) && (!flank1_reg)) + begin + cycle_ctr_new = 32'h00000000; + delta_we = 1'b1; + end + end // delta_logic + + + //---------------------------------------------------------------- + // entropy_ack_logic + // + // The logic needed to handle detection that entropy has been + // read and ensure that we collect more than 32 entropy + // bits beforeproviding more entropy. + //---------------------------------------------------------------- + always @* + begin : entropy_ack_logic + bit_ctr_new = 6'h00; + bit_ctr_we = 1'b0; + entropy_syn_new = 1'b0; + + if (bit_ctr_reg == 6'h20) + begin + entropy_syn_new = 1'b1; + end + + if ((bit_ctr_inc) && (bit_ctr_reg < 6'h20)) + begin + bit_ctr_new = bit_ctr_reg + 1'b1; + bit_ctr_we = 1'b1; + end + else if (entropy_ack) + begin + bit_ctr_new = 6'h00; + bit_ctr_we = 1'b1; + end + end // entropy_ack_logic + + + //---------------------------------------------------------------- + // api_logic + //---------------------------------------------------------------- + always @* + begin : api_logic + tmp_read_data = 32'h00000000; + tmp_error = 1'b0; + enable_new = 0; + enable_we = 0; + + if (cs) + begin + if (we) + begin + case (address) + // Write operations. + ADDR_CTRL: + begin + enable_new = write_data[CTRL_ENABLE_BIT]; + enable_we = 1; + end + + default: + begin + tmp_error = 1; + end + endcase // case (address) + end // if (we) + + else + begin + case (address) + ADDR_CTRL: + begin + tmp_read_data = {31'h00000000, enable_reg}; + end + + ADDR_STATUS: + begin + tmp_read_data = {31'h00000000, entropy_syn_reg}; + end + + ADDR_ENTROPY: + begin + tmp_read_data = entropy_reg; + end + + ADDR_DELTA: + begin + tmp_read_data = delta_reg; + end + + default: + begin + tmp_error = 1; + end + endcase // case (address) + end // else: !if(we) + end // if (cs) + end // api_logic + +endmodule // avalanche_entropy + +//====================================================================== +// EOF avalanche_entropy.v +//====================================================================== |