aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--src/sw/00-index.txt12
-rw-r--r--src/sw/1000_block.binbin0 -> 64000 bytes
-rw-r--r--src/sw/hash.c586
-rw-r--r--src/sw/nist_1024_double.binbin0 -> 256 bytes
-rw-r--r--src/sw/nist_1024_single.binbin0 -> 128 bytes
-rw-r--r--src/sw/nist_512_double.binbin0 -> 128 bytes
-rw-r--r--src/sw/nist_512_single.binbin0 -> 64 bytes
7 files changed, 598 insertions, 0 deletions
diff --git a/src/sw/00-index.txt b/src/sw/00-index.txt
new file mode 100644
index 0000000..c704834
--- /dev/null
+++ b/src/sw/00-index.txt
@@ -0,0 +1,12 @@
+configure.sh - Configure a bitstream file onto the FPGA
+
+hash_tester.c - Test the hash cores
+hash_tester.py - Same thing, only in Python
+
+hash.c - Hash an arbitrary file
+
+nist_512_single.bin - One-block test file for SHA-1 and SHA-256
+nist_512_double.bin - Two-block test file for SHA-1 and SHA-256
+nist_1024_single.bin - One-block test file for SHA-512
+nist_1024_double.bin - Two-block test file for SHA-512
+1000_block.bin - A large file for speed testing
diff --git a/src/sw/1000_block.bin b/src/sw/1000_block.bin
new file mode 100644
index 0000000..7e2b02b
--- /dev/null
+++ b/src/sw/1000_block.bin
Binary files differ
diff --git a/src/sw/hash.c b/src/sw/hash.c
new file mode 100644
index 0000000..f67a863
--- /dev/null
+++ b/src/sw/hash.c
@@ -0,0 +1,586 @@
+/*
+ * hash.c
+ * ------
+ * This program uses the coretest_hashes subsystem to produce a
+ * cryptographic hash of a file or input stream. It is a generalization
+ * of the hash_tester.c test program.
+ *
+ * Authors: Joachim Strömbergson, Paul Selkirk
+ * Copyright (c) 2014, SUNET
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <string.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <errno.h>
+#include <sys/mman.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <time.h>
+#include <sys/time.h>
+#include <linux/i2c-dev.h>
+#include <sys/ioctl.h>
+#include <arpa/inet.h>
+#include <ctype.h>
+
+char *usage =
+"Usage: %s [-d] [-v] [-q] [-i I2C_device] [-a I2C_addr] [algorithm [file]]\n"
+"algorithms: sha-1, sha-256, sha-512/224, sha-512/256, sha-384, sha-512\n";
+
+/* I2C configuration */
+#define I2C_dev "/dev/i2c-2"
+#define I2C_addr 0x0f
+
+/* command codes */
+#define SOC 0x55
+#define EOC 0xaa
+#define READ_CMD 0x10
+#define WRITE_CMD 0x11
+#define RESET_CMD 0x01
+
+/* response codes */
+#define SOR 0xaa
+#define EOR 0x55
+#define READ_OK 0x7f
+#define WRITE_OK 0x7e
+#define RESET_OK 0x7d
+#define UNKNOWN 0xfe
+#define ERROR 0xfd
+
+/* addresses and codes common to all hash cores */
+#define ADDR_NAME0 0x00
+#define ADDR_NAME1 0x01
+#define ADDR_VERSION 0x02
+#define ADDR_CTRL 0x08
+#define CTRL_INIT_CMD 1
+#define CTRL_NEXT_CMD 2
+#define ADDR_STATUS 0x09
+#define STATUS_READY_BIT 0
+#define STATUS_VALID_BIT 1
+
+/* addresses and codes for the specific hash cores */
+/* block and digest lengths are number of 32-bit words */
+#define SHA1_ADDR_PREFIX 0x10
+#define SHA1_ADDR_BLOCK 0x10
+#define SHA1_BLOCK_LEN 16
+#define SHA1_ADDR_DIGEST 0x20
+#define SHA1_DIGEST_LEN 5
+
+#define SHA256_ADDR_PREFIX 0x20
+#define SHA256_ADDR_BLOCK 0x10
+#define SHA256_BLOCK_LEN 16
+#define SHA256_ADDR_DIGEST 0x20
+#define SHA256_DIGEST_LEN 8
+
+#define SHA512_ADDR_PREFIX 0x30
+#define SHA512_CTRL_MODE_LOW 2
+#define SHA512_CTRL_MODE_HIGH 3
+#define SHA512_ADDR_BLOCK 0x10
+#define SHA512_BLOCK_LEN 32
+#define SHA512_ADDR_DIGEST 0x40
+#define SHA512_DIGEST_LEN 16
+#define MODE_SHA_512_224 0
+#define MODE_SHA_512_256 1
+#define MODE_SHA_384 2
+#define MODE_SHA_512 3
+
+int i2cfd;
+int debug = 0;
+int verbose = 0;
+
+/* ---------------- algorithm lookup code ---------------- */
+
+struct ctrl {
+ char *name;
+ uint8_t addr_prefix;
+ uint8_t addr_block;
+ uint8_t block_len;
+ uint8_t addr_digest;
+ uint8_t digest_len;
+ uint8_t mode;
+} ctrl[] = {
+ { "sha-1", SHA1_ADDR_PREFIX, SHA1_ADDR_BLOCK, SHA1_BLOCK_LEN,
+ SHA1_ADDR_DIGEST, SHA1_DIGEST_LEN, 0 },
+ { "sha-256", SHA256_ADDR_PREFIX, SHA256_ADDR_BLOCK, SHA256_BLOCK_LEN,
+ SHA256_ADDR_DIGEST, SHA256_DIGEST_LEN, 0 },
+ { "sha-512/224", SHA512_ADDR_PREFIX, SHA512_ADDR_BLOCK, SHA512_BLOCK_LEN,
+ SHA512_ADDR_DIGEST, 7, MODE_SHA_512_224 },
+ { "sha-512/256", SHA512_ADDR_PREFIX, SHA512_ADDR_BLOCK, SHA512_BLOCK_LEN,
+ SHA512_ADDR_DIGEST, 8, MODE_SHA_512_256 },
+ { "sha-384", SHA512_ADDR_PREFIX, SHA512_ADDR_BLOCK, SHA512_BLOCK_LEN,
+ SHA512_ADDR_DIGEST, 12, MODE_SHA_384 },
+ { "sha-512", SHA512_ADDR_PREFIX, SHA512_ADDR_BLOCK, SHA512_BLOCK_LEN,
+ SHA512_ADDR_DIGEST, 16, MODE_SHA_512 },
+ { NULL, 0, 0, 0 }
+};
+
+/* return the control structure for the given algorithm */
+struct ctrl *find_algo(char *algo)
+{
+ int i;
+
+ for (i = 0; ctrl[i].name != NULL; ++i)
+ if (strcmp(ctrl[i].name, algo) == 0)
+ return &ctrl[i];
+
+ fprintf(stderr, "algorithm \"%s\" not found\n\n", algo);
+ fprintf(stderr, usage, "hash");
+ return NULL;
+}
+
+/* ---------------- I2C low-level code ---------------- */
+
+int i2c_open(char *dev, int addr)
+{
+ if (debug) printf("i2c_open(%s, %d)\n", dev, addr);
+
+ i2cfd = open(dev, O_RDWR);
+ if (i2cfd < 0) {
+ fprintf(stderr, "Unable to open %s: ", dev);
+ perror("");
+ i2cfd = 0;
+ return 1;
+ }
+
+ if (ioctl(i2cfd, I2C_SLAVE, addr) < 0) {
+ fprintf(stderr, "Unable to set I2C slave device 0x%02x: ", addr);
+ perror("");
+ return 1;
+ }
+
+ return 0;
+}
+
+void i2c_close(void)
+{
+ close(i2cfd);
+}
+
+int i2c_write(uint8_t *buf, int len)
+{
+ if (debug) {
+ int i;
+ printf("write [");
+ for (i = 0; i < len; ++i)
+ printf(" %02x", buf[i]);
+ printf(" ]\n");
+ }
+
+ if (write(i2cfd, buf, len) != len) {
+ perror("i2c write failed");
+ return 1;
+ }
+
+ return 0;
+}
+
+int i2c_read(uint8_t *b)
+{
+ /* read() on the i2c device only returns one byte at a time,
+ * and tc_get_resp() needs to parse the response one byte at a time
+ */
+ if (read(i2cfd, b, 1) != 1) {
+ perror("i2c read failed");
+ return 1;
+ }
+
+ return 0;
+}
+
+/* ---------------- test-case low-level code ---------------- */
+
+int tc_send_write_cmd(uint8_t addr0, uint8_t addr1, uint8_t *data)
+{
+ uint8_t buf[9] = { SOC, WRITE_CMD, addr0, addr1,
+ data[0], data[1], data[2], data[3], EOC };
+
+ return i2c_write(buf, sizeof(buf));
+}
+
+int tc_send_read_cmd(uint8_t addr0, uint8_t addr1)
+{
+ uint8_t buf[5] = { SOC, READ_CMD, addr0, addr1, EOC };
+
+ return i2c_write(buf, sizeof(buf));
+}
+
+int tc_get_resp(uint8_t *buf, int len)
+{
+ int i;
+
+ for (i = 0; i < len; ++i) {
+ if (i2c_read(&buf[i]) != 0)
+ return 1;
+ if ((i == 0) && (buf[i] != SOR)) {
+ /* we've gotten out of sync, and there's probably nothing we can do */
+ fprintf(stderr, "response byte 0: expected 0x%02x (SOR), got 0x%02x\n",
+ SOR, buf[0]);
+ return 1;
+ }
+ else if (i == 1) { /* response code */
+ switch (buf[i]) {
+ case READ_OK:
+ len = 9;
+ break;
+ case WRITE_OK:
+ len = 5;
+ break;
+ case RESET_OK:
+ len = 3;
+ break;
+ case ERROR:
+ case UNKNOWN:
+ len = 4;
+ break;
+ default:
+ /* we've gotten out of sync, and there's probably nothing we can do */
+ fprintf(stderr, "unknown response code 0x%02x\n", buf[i]);
+ return 1;
+ }
+ }
+ }
+
+ if (debug) {
+ printf("read [");
+ for (i = 0; i < len; ++i)
+ printf(" %02x", buf[i]);
+ printf(" ]\n");
+ }
+
+ return 0;
+}
+
+int tc_compare(uint8_t *buf, uint8_t *expected, int len)
+{
+ int i;
+
+ /* start at byte 1 because SOR has already been tested */
+ for (i = 1; i < len; ++i) {
+ if (buf[i] != expected[i]) {
+ fprintf(stderr, "response byte %d: expected 0x%02x, got 0x%02x\n",
+ i, expected[i], buf[i]);
+ return 1;
+ }
+ }
+
+ return 0;
+}
+
+int tc_get_write_resp(uint8_t addr0, uint8_t addr1)
+{
+ uint8_t buf[5];
+ uint8_t expected[5] = { SOR, WRITE_OK, addr0, addr1, EOR };
+
+ return
+ tc_get_resp(buf, sizeof(buf)) ||
+ tc_compare(buf, expected, sizeof(expected));
+}
+
+int tc_get_read_resp(uint8_t addr0, uint8_t addr1, uint8_t *data)
+{
+ uint8_t buf[9];
+ uint8_t expected[4] = { SOR, READ_OK, addr0, addr1 };
+
+ if ((tc_get_resp(buf, sizeof(buf)) != 0) ||
+ (tc_compare(buf, expected, 4) != 0) || buf[8] != EOR)
+ return 1;
+
+ data[0] = buf[4];
+ data[1] = buf[5];
+ data[2] = buf[6];
+ data[3] = buf[7];
+
+ return 0;
+}
+
+int tc_write(uint8_t addr0, uint8_t addr1, uint8_t *data)
+{
+ return (tc_send_write_cmd(addr0, addr1, data) ||
+ tc_get_write_resp(addr0, addr1));
+}
+
+int tc_read(uint8_t addr0, uint8_t addr1, uint8_t *data)
+{
+ return (tc_send_read_cmd(addr0, addr1) ||
+ tc_get_read_resp(addr0, addr1, data));
+}
+
+int tc_init(uint8_t addr0, uint8_t mode)
+{
+ uint8_t buf[4] = { 0, 0, 0, CTRL_INIT_CMD };
+
+ if (addr0 == SHA512_ADDR_PREFIX)
+ buf[3] += (mode << SHA512_CTRL_MODE_LOW);
+
+ return tc_write(addr0, ADDR_CTRL, buf);
+}
+
+int tc_next(uint8_t addr0, uint8_t mode)
+{
+ uint8_t buf[4] = { 0, 0, 0, CTRL_NEXT_CMD };
+
+ if (addr0 == SHA512_ADDR_PREFIX)
+ buf[3] += (mode << SHA512_CTRL_MODE_LOW);
+
+ return tc_write(addr0, ADDR_CTRL, buf);
+}
+
+int tc_wait(uint8_t addr0, uint8_t status)
+{
+ uint8_t buf[4];
+
+ do {
+ if (tc_read(addr0, ADDR_STATUS, &buf[0]) != 0)
+ return 1;
+ } while ((buf[3] & status) != status);
+
+ return 0;
+}
+
+int tc_wait_ready(uint8_t addr0)
+{
+ return tc_wait(addr0, STATUS_READY_BIT);
+}
+
+int tc_wait_valid(uint8_t addr0)
+{
+ return tc_wait(addr0, STATUS_VALID_BIT);
+}
+
+int tc_write_block(uint8_t addr0, uint8_t addr1, uint8_t *buf, int len)
+{
+ int i;
+
+ for (i = 0; i < len; ++i) {
+ if (tc_write(addr0, addr1 + i, &buf[i*4]) != 0)
+ return 1;
+ }
+
+ return 0;
+}
+
+int tc_read_digest(uint8_t addr0, uint8_t addr1, uint8_t *buf, int len)
+{
+ int i;
+
+ for (i = 0; i < len; ++i) {
+ if (tc_read(addr0, addr1 + i, &buf[i*4]) != 0)
+ return 1;
+ }
+
+ return 0;
+}
+
+/* ---------------- hash ---------------- */
+
+/* return number of digest bytes read */
+int hash(char *algo, char *file, uint8_t *digest)
+{
+ uint8_t block[SHA512_BLOCK_LEN * 4];
+ struct ctrl *ctrl;
+ int in_fd = 0; /* stdin */
+ uint8_t addr0, baddr, blen, daddr, dlen, mode;
+ int nblk, nread, first;
+ int i, ret = -1;
+ struct timeval start, stop, difftime;
+
+ if (debug) printf("hash(algo=%s, file=%s, digest=%p)\n", algo, file, digest);
+
+ ctrl = find_algo(algo);
+ if (ctrl == NULL)
+ return -1;
+ addr0 = ctrl->addr_prefix;
+ baddr = ctrl->addr_block;
+ blen = ctrl->block_len;
+ daddr = ctrl->addr_digest;
+ dlen = ctrl->digest_len;
+ mode = ctrl->mode;
+
+ if (strcmp(file, "-") != 0) {
+ in_fd = open(file, O_RDONLY);
+ if (in_fd < 0) {
+ perror("open");
+ return -1;
+ }
+ }
+
+ if (verbose) {
+ if (gettimeofday(&start, NULL) < 0) {
+ perror("gettimeofday");
+ goto out;
+ }
+ }
+
+ for (nblk = 0, first = 1; ; ++nblk) {
+ nread = read(in_fd, block, blen * 4);
+ if (nread != blen * 4) {
+ if (nread < 0) {
+ /* read error */
+ perror("read");
+ goto out;
+ }
+ else if (nread == 0) {
+ /* EOF */
+ break;
+ }
+ else {
+ /* partial read - pad the block with 0 */
+ while (nread < blen * 4) {
+ block[nread++] = 0;
+ }
+ }
+ }
+ if (debug) {
+ printf("write [");
+ for (i = 0; i < blen * 4; ++i)
+ printf(" %02x", block[i]);
+ printf(" ]\n");
+ }
+ if (tc_write_block(addr0, baddr, block, blen) != 0) {
+ goto out;
+ }
+ if (first) {
+ first = 0;
+ if (tc_init(addr0, mode) != 0)
+ goto out;
+ }
+ else {
+ if (tc_next(addr0, mode) != 0)
+ goto out;
+ }
+ if (tc_wait_ready(addr0) != 0)
+ goto out;
+ }
+
+ if (tc_wait_valid(addr0) != 0)
+ goto out;
+ if (tc_read_digest(addr0, daddr, digest, dlen) != 0) {
+ perror("i2c read failed");
+ goto out;
+ }
+
+ if (verbose) {
+ if (gettimeofday(&stop, NULL) < 0) {
+ perror("gettimeofday");
+ goto out;
+ }
+ timersub(&stop, &start, &difftime);
+ printf("%d blocks written in %d.%03d sec (%.3f blocks/sec)\n",
+ nblk, (int)difftime.tv_sec, (int)difftime.tv_usec/1000,
+ (float)nblk / ((float)difftime.tv_sec + ((float)difftime.tv_usec)/1000000));
+ }
+
+ ret = dlen * 4;
+out:
+ if (in_fd != 0)
+ close(in_fd);
+ return ret;
+}
+
+/* ---------------- main ---------------- */
+
+int main(int argc, char *argv[])
+{
+ char *dev = I2C_dev;
+ int addr = I2C_addr;
+ int i, opt, quiet = 0;
+ char *algo = "sha-1";
+ char *file = "-";
+ uint8_t digest[512/8];
+ int dlen;
+
+ while ((opt = getopt(argc, argv, "h?dvqi:a:")) != -1) {
+ switch (opt) {
+ case 'h':
+ case '?':
+ printf(usage, argv[0]);
+ return 0;
+ case 'd':
+ debug = 1;
+ break;
+ case 'v':
+ verbose = 1;
+ break;
+ case 'q':
+ quiet = 1;
+ break;
+ case 'i':
+ dev = optarg;
+ break;
+ case 'a':
+ addr = (int)strtol(optarg, NULL, 0);
+ if ((addr < 0x03) || (addr > 0x77)) {
+ fprintf(stderr, "addr must be between 0x03 and 0x77\n");
+ return 1;
+ }
+ break;
+ default:
+ fprintf(stderr, usage, argv[0]);
+ return 1;
+ }
+ }
+
+ if (optind < argc) {
+ algo = argv[optind];
+ ++optind;
+ }
+ else {
+ if (!quiet)
+ printf("defaulting to algorithm \"%s\"\n", algo);
+ }
+
+ if (optind < argc) {
+ file = argv[optind];
+ ++optind;
+ }
+ else {
+ if (!quiet)
+ printf("reading from stdin\n");
+ }
+
+ if (i2c_open(dev, addr) != 0)
+ return -1;
+
+ dlen = hash(algo, file, digest);
+ if (dlen < 0)
+ return 1;
+
+ for (i = 0; i < dlen; ++i) {
+ printf("%02x", digest[i]);
+ if (i % 16 == 15)
+ printf("\n");
+ else if (i % 4 == 3)
+ printf(" ");
+ }
+ if (dlen % 16 != 0)
+ printf("\n");
+
+ i2c_close();
+
+ return 0;
+}
diff --git a/src/sw/nist_1024_double.bin b/src/sw/nist_1024_double.bin
new file mode 100644
index 0000000..543b415
--- /dev/null
+++ b/src/sw/nist_1024_double.bin
Binary files differ
diff --git a/src/sw/nist_1024_single.bin b/src/sw/nist_1024_single.bin
new file mode 100644
index 0000000..100111a
--- /dev/null
+++ b/src/sw/nist_1024_single.bin
Binary files differ
diff --git a/src/sw/nist_512_double.bin b/src/sw/nist_512_double.bin
new file mode 100644
index 0000000..ac8d755
--- /dev/null
+++ b/src/sw/nist_512_double.bin
Binary files differ
diff --git a/src/sw/nist_512_single.bin b/src/sw/nist_512_single.bin
new file mode 100644
index 0000000..1f3a5ce
--- /dev/null
+++ b/src/sw/nist_512_single.bin
Binary files differ
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 03:47:33 +0000