diff options
Diffstat (limited to 'bench/tb_base_point_multiplier.v')
| -rw-r--r-- | bench/tb_base_point_multiplier.v | 261 |
1 files changed, 261 insertions, 0 deletions
diff --git a/bench/tb_base_point_multiplier.v b/bench/tb_base_point_multiplier.v new file mode 100644 index 0000000..7d8de3b --- /dev/null +++ b/bench/tb_base_point_multiplier.v @@ -0,0 +1,261 @@ +//------------------------------------------------------------------------------ +// +// tb_base_point_multiplier.v +// ----------------------------------------------------------------------------- +// Testbench for Ed25519 base point scalar multiplier. +// +// Authors: Pavel Shatov +// +// Copyright (c) 2018, NORDUnet A/S +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions are met: +// +// - Redistributions of source code must retain the above copyright notice, +// this list of conditions and the following disclaimer. +// +// - Redistributions in binary form must reproduce the above copyright notice, +// this list of conditions and the following disclaimer in the documentation +// and/or other materials provided with the distribution. +// +// - Neither the name of the NORDUnet nor the names of its contributors may be +// used to endorse or promote products derived from this software without +// specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" +// AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +// IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +// ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE +// LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +// CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +// SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +// CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +// ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +// POSSIBILITY OF SUCH DAMAGE. +// +//------------------------------------------------------------------------------ + +//------------------------------------------------------------------------------ +`timescale 1ns / 1ps +//------------------------------------------------------------------------------ + +module tb_base_point_multiplier; + + + // + // Test Vectors + // + `include "ed25519_test_vectors.v" + + + // + // Core Parameters + // + localparam WORD_COUNTER_WIDTH = 3; + localparam OPERAND_NUM_WORDS = 8; + + + // + // Clock (100 MHz) + // +`define CLOCK_PERIOD 10.0 +`define CLOCK_HALF_PERIOD (0.5 * `CLOCK_PERIOD) + + reg clk = 1'b0; + always #`CLOCK_HALF_PERIOD clk = ~clk; + + + // + // Inputs, Outputs + // + reg rst_n; + reg ena; + wire rdy; + + + // + // Buffers (K, QY) + // + wire [WORD_COUNTER_WIDTH-1:0] core_k_addr; + wire [WORD_COUNTER_WIDTH-1:0] core_qy_addr; + + wire core_qy_wren; + + wire [ 32-1:0] core_k_data; + wire [ 32-1:0] core_qy_data; + + reg [WORD_COUNTER_WIDTH-1:0] tb_k_addr; + reg [WORD_COUNTER_WIDTH-1:0] tb_qy_addr; + + reg tb_k_wren; + + reg [ 32-1:0] tb_k_data; + wire [ 32-1:0] tb_qy_data; + + bram_1rw_1ro_readfirst # (.MEM_WIDTH(32), .MEM_ADDR_BITS(WORD_COUNTER_WIDTH)) + bram_k + ( .clk(clk), + .a_addr(tb_k_addr), .a_wr(tb_k_wren), .a_in(tb_k_data), .a_out(), + .b_addr(core_k_addr), .b_out(core_k_data) + ); + + bram_1rw_1ro_readfirst # (.MEM_WIDTH(32), .MEM_ADDR_BITS(WORD_COUNTER_WIDTH)) + bram_qy + ( .clk(clk), + .a_addr(core_qy_addr), .a_wr(core_qy_wren), .a_in(core_qy_data), .a_out(), + .b_addr(tb_qy_addr), .b_out(tb_qy_data) + ); + + + // + // UUT + // + ed25519_multiplier uut + ( + .clk (clk), + .rst_n (rst_n), + + .ena (ena), + .rdy (rdy), + + .k_addr (core_k_addr), + .qy_addr (core_qy_addr), + + .qy_wren (core_qy_wren), + + .k_din (core_k_data), + .qy_dout (core_qy_data) + ); + + + // + // Testbench Routine + // + reg ok = 1; + initial begin + + /* initialize control inputs */ + rst_n = 0; + ena = 0; + + /* wait for some time */ + #200; + + /* de-assert reset */ + rst_n = 1; + + /* wait for some time */ + #100; + + /* run tests */ + $display("1. Q = d * G..."); + test_base_point_multiplier(ED25519_D_HASHED_LSB_1, ED25519_Q_Y_1); + + /* print result */ + if (ok) $display("tb_base_point_multiplier: SUCCESS"); + else $display("tb_base_point_multiplier: FAILURE"); + // + #10000; + // + //$finish; + // + end + + + // + // Test Task + // + task test_base_point_multiplier; + + input [255:0] k; + input [255:0] qy; + + reg [255:0] k_shreg; + reg [255:0] qy_shreg; + reg qy_ok; + + integer w; + + begin + + /* initialize result */ + qy_ok = 0; + + /* initialize shift registers */ + k_shreg = k; + + /* start filling memories */ + tb_k_wren = 1; + + /* write all the words */ + for (w=0; w<OPERAND_NUM_WORDS; w=w+1) begin + + /* set addresses */ + tb_k_addr = w[WORD_COUNTER_WIDTH-1:0]; + + /* set data words */ + tb_k_data = k_shreg[31:0]; + + /* shift inputs */ + k_shreg = {{32{1'bX}}, k_shreg[255:32]}; + + /* wait for 1 clock tick */ + #`CLOCK_PERIOD; + + end + + /* stop filling memories */ + tb_k_wren = 0; + + /* wipe addresses */ + tb_k_addr = {WORD_COUNTER_WIDTH{1'bX}}; + + /* wipe data words */ + tb_k_data = {32{1'bX}}; + + /* start operation */ + ena = 1; + + /* clear flag */ + #`CLOCK_PERIOD ena = 0; + + /* wait for operation to complete */ + while (!rdy) #`CLOCK_PERIOD; + +// /* read result */ +// for (w=0; w<OPERAND_NUM_WORDS; w=w+1) begin +// +// /* set address */ +// tb_qxy_addr = w[WORD_COUNTER_WIDTH-1:0]; +// +// /* wait for 1 clock tick */ +// #10; +// +// /* store data word */ +// qx_shreg = {tb_qx_data, qx_shreg[255:32]}; +// qy_shreg = {tb_qy_data, qy_shreg[255:32]}; +// +// end +// +// /* compare */ +// q_ok = (qx_shreg == qx) && +// (qy_shreg == qy); +// + /* display results */ + if (qy_ok) $display("test_base_point_multiplier(): CORRECT RESULT"); + else $display("test_base_point_multiplier(): WRONG RESULT"); + + /* update global flag */ + ok = ok & qy_ok; + + end + + endtask + +endmodule + + +//------------------------------------------------------------------------------ +// End-of-File +//------------------------------------------------------------------------------ |