diff options
Diffstat (limited to 'rtl/ecdsa384_core_top.v')
| -rw-r--r-- | rtl/ecdsa384_core_top.v | 150 |
1 files changed, 150 insertions, 0 deletions
diff --git a/rtl/ecdsa384_core_top.v b/rtl/ecdsa384_core_top.v new file mode 100644 index 0000000..2dc800e --- /dev/null +++ b/rtl/ecdsa384_core_top.v @@ -0,0 +1,150 @@ +//====================================================================== +// +// Copyright (c) 2016, 2018 NORDUnet A/S All rights reserved. +// +// Redistribution and use in source and binary forms, with or without +// modification, are permitted provided that the following conditions +// are met: +// - Redistributions of source code must retain the above copyright +// notice, this list of conditions and the following disclaimer. +// +// - Redistributions in binary form must reproduce the above copyright +// notice, this list of conditions and the following disclaimer in the +// documentation and/or other materials provided with the distribution. +// +// - Neither the name of the NORDUnet nor the names of its contributors may +// be used to endorse or promote products derived from this software +// without specific prior written permission. +// +// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS +// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED +// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A +// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED +// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR +// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF +// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING +// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +// +//====================================================================== + +module ecdsa384_core_top +( + input wire clk, + input wire rst_n, + + input wire next, + output wire valid, + + input wire bus_cs, + input wire bus_we, + input wire [ 5:0] bus_addr, + input wire [31:0] bus_data_wr, + output wire [31:0] bus_data_rd +); + + + // + // Memory Banks + // + localparam [1:0] BUS_ADDR_BANK_K = 2'b00; + localparam [1:0] BUS_ADDR_BANK_X = 2'b01; + localparam [1:0] BUS_ADDR_BANK_Y = 2'b10; + + wire [1:0] bus_addr_upper = bus_addr[5:4]; + wire [3:0] bus_addr_lower = bus_addr[3:0]; + + + // + // Memories + // + + wire [31:0] user_rw_k_bram_out; + wire [31:0] user_ro_x_bram_out; + wire [31:0] user_ro_y_bram_out; + + wire [ 3:0] core_ro_k_bram_addr; + wire [ 3:0] core_rw_xy_bram_addr; + + wire core_rw_x_bram_wren; + wire core_rw_y_bram_wren; + + wire [31:0] core_ro_k_bram_dout; + wire [31:0] core_rw_xy_bram_din; + + bram_1rw_1ro_readfirst # + (.MEM_WIDTH(32), .MEM_ADDR_BITS(4)) + bram_k + ( .clk(clk), + .a_addr(bus_addr_lower), .a_out(user_rw_k_bram_out), .a_wr(bus_cs && bus_we && (bus_addr_upper == BUS_ADDR_BANK_K)), .a_in(bus_data_wr), + .b_addr(core_ro_k_bram_addr), .b_out(core_ro_k_bram_dout) + ); + + bram_1rw_1ro_readfirst # + (.MEM_WIDTH(32), .MEM_ADDR_BITS(4)) + bram_x + ( .clk(clk), + .a_addr(core_rw_xy_bram_addr), .a_out(), .a_wr(core_rw_x_bram_wren), .a_in(core_rw_xy_bram_din), + .b_addr(bus_addr_lower), .b_out(user_ro_x_bram_out) + ); + + bram_1rw_1ro_readfirst # + (.MEM_WIDTH(32), .MEM_ADDR_BITS(4)) + bram_y + ( .clk(clk), + .a_addr(core_rw_xy_bram_addr), .a_out(), .a_wr(core_rw_y_bram_wren), .a_in(core_rw_xy_bram_din), + .b_addr(bus_addr_lower), .b_out(user_ro_y_bram_out) + ); + + + // + // Curve Base Point Multiplier + // + reg next_dly; + + always @(posedge clk) next_dly <= next; + + wire next_trig = next && !next_dly; + + ecdsa384_base_point_multiplier base_point_multiplier_p256 + ( + .clk (clk), + .rst_n (rst_n), + + .ena (next_trig), + .rdy (valid), + + .k_addr (core_ro_k_bram_addr), + .rxy_addr (core_rw_xy_bram_addr), + + .rx_wren (core_rw_x_bram_wren), + .ry_wren (core_rw_y_bram_wren), + + .k_din (core_ro_k_bram_dout), + .rxy_dout (core_rw_xy_bram_din) + ); + + // + // Output Selector + // + reg [1:0] bus_addr_upper_prev; + always @(posedge clk) bus_addr_upper_prev = bus_addr_upper; + + reg [31:0] bus_data_rd_mux; + assign bus_data_rd = bus_data_rd_mux; + + always @(*) + // + case (bus_addr_upper_prev) + // + BUS_ADDR_BANK_K: bus_data_rd_mux = user_rw_k_bram_out; + BUS_ADDR_BANK_X: bus_data_rd_mux = user_ro_x_bram_out; + BUS_ADDR_BANK_Y: bus_data_rd_mux = user_ro_y_bram_out; + // + default: bus_data_rd_mux = {32{1'b0}}; + // + endcase + +endmodule |