Same changes as per the P-256 core.HEADmaster

1 files changed, 0 insertions, 160 deletions

diff --git a/rtl/ecdsa384.v b/rtl/ecdsa384.v
deleted file mode 100644
index 7a63c9e..0000000
--- a/rtl/ecdsa384.v
+++ /dev/null
@@ -1,160 +0,0 @@
-//======================================================================
-//
-// Copyright (c) 2016, NORDUnet A/S All rights reserved.
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions
-// are met:
-// - Redistributions of source code must retain the above copyright
-//   notice, this list of conditions and the following disclaimer.
-//
-// - Redistributions in binary form must reproduce the above copyright
-//   notice, this list of conditions and the following disclaimer in the
-//   documentation and/or other materials provided with the distribution.
-//
-// - Neither the name of the NORDUnet nor the names of its contributors may
-//   be used to endorse or promote products derived from this software
-//   without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
-// IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
-// TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-// PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
-// TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-// PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-// LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-// NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-// SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-//
-//======================================================================
-
-`timescale 1ns / 1ps
-
-module ecdsa384
-  (
-   input wire 	      clk,
-   input wire 	      rst_n,
-
-   input wire 	      next,
-   output wire 	      valid,
-
-   input wire 	      bus_cs,
-   input wire 	      bus_we,
-   input wire [ 5:0]  bus_addr,
-   input wire [31:0]  bus_data_wr,
-   output wire [31:0] bus_data_rd
-   );
-
-
-   //
-   // Memory Banks
-   //
-   localparam [1:0] BUS_ADDR_BANK_K = 2'b00;
-   localparam [1:0] BUS_ADDR_BANK_X = 2'b01;
-   localparam [1:0] BUS_ADDR_BANK_Y = 2'b10;
-
-   wire [1:0] 	      bus_addr_upper = bus_addr[5:4];
-   wire [3:0] 	      bus_addr_lower = bus_addr[3:0];
-
-
-   //
-   // Memories
-   //
-
-   wire [31:0] 	      user_rw_k_bram_out;
-   wire [31:0] 	      user_ro_x_bram_out;
-   wire [31:0] 	      user_ro_y_bram_out;
-
-   wire [ 3:0] 	      core_ro_k_bram_addr;
-   wire [ 3:0] 	      core_rw_x_bram_addr;
-   wire [ 3:0] 	      core_rw_y_bram_addr;
-
-   wire 	      core_rw_x_bram_wren;
-   wire 	      core_rw_y_bram_wren;
-
-   wire [31:0] 	      core_ro_k_bram_dout;
-   wire [31:0] 	      core_rw_x_bram_din;
-   wire [31:0] 	      core_rw_y_bram_din;
-
-
-   bram_1rw_1ro_readfirst #
-     (	.MEM_WIDTH(32), .MEM_ADDR_BITS(4)
-	)
-   bram_k
-     (	.clk(clk),
-	.a_addr(bus_addr_lower), .a_out(user_rw_k_bram_out), .a_wr(bus_cs && bus_we && (bus_addr_upper == BUS_ADDR_BANK_K)), .a_in(bus_data_wr),
-	.b_addr(core_ro_k_bram_addr), .b_out(core_ro_k_bram_dout)
-	);
-
-   bram_1rw_1ro_readfirst #
-     (	.MEM_WIDTH(32), .MEM_ADDR_BITS(4)
-	)
-   bram_x
-     (	.clk(clk),
-	.a_addr(core_rw_x_bram_addr), .a_out(), .a_wr(core_rw_x_bram_wren), .a_in(core_rw_x_bram_din),
-	.b_addr(bus_addr_lower),      .b_out(user_ro_x_bram_out)
-	);
-
-   bram_1rw_1ro_readfirst #
-     (	.MEM_WIDTH(32), .MEM_ADDR_BITS(4)
-	)
-   bram_y
-     (	.clk(clk),
-	.a_addr(core_rw_y_bram_addr), .a_out(), .a_wr(core_rw_y_bram_wren), .a_in(core_rw_y_bram_din),
-	.b_addr(bus_addr_lower),      .b_out(user_ro_y_bram_out)
-	);
-
-
-   //
-   // Curve Base Point Multiplier
-   //
-   reg 		      next_dly;
-
-   always @(posedge clk) next_dly <= next;
-
-   wire 	      next_trig = next && !next_dly;
-
-   curve_mul_384 base_point_multiplier_p384
-     (
-      .clk		(clk),
-      .rst_n	(rst_n),
-
-      .ena		(next_trig),
-      .rdy		(valid),
-
-      .k_addr	(core_ro_k_bram_addr),
-      .rx_addr	(core_rw_x_bram_addr),
-      .ry_addr	(core_rw_y_bram_addr),
-
-      .rx_wren	(core_rw_x_bram_wren),
-      .ry_wren	(core_rw_y_bram_wren),
-
-      .k_din	(core_ro_k_bram_dout),
-      .rx_dout	(core_rw_x_bram_din),
-      .ry_dout	(core_rw_y_bram_din)
-      );
-
-   //
-   // Output Selector
-   //
-   reg [1:0] 	      bus_addr_upper_prev;
-   always @(posedge clk) bus_addr_upper_prev = bus_addr_upper;
-
-   reg [31: 0] 	      bus_data_rd_mux;
-   assign bus_data_rd = bus_data_rd_mux;
-
-   always @(*)
-     //
-     case (bus_addr_upper_prev)
-       //
-       BUS_ADDR_BANK_K: bus_data_rd_mux = user_rw_k_bram_out;
-       BUS_ADDR_BANK_X: bus_data_rd_mux = user_ro_x_bram_out;
-       BUS_ADDR_BANK_Y: bus_data_rd_mux = user_ro_y_bram_out;
-       //
-       default:         bus_data_rd_mux = {32{1'b0}};
-       //
-     endcase
-
-endmodule